6482 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
BruebachL	b4e24f958a	[Network] Do not format discarded debug messages, parse without memmove (#7606) ... * [Network] Do not format discarded debug messages, parse without memmove Protocol debug logging gets the full protobuf message rendered through TextFormat and reflection. On the server this happened before every session/room/game/moderator/admin/developer command, even though the default Server_ProtocolHandler::logDebugMessage() is a no-op and even when servatrice has no log file configured. On the clients the same string was built as an argument to qCDebug(), which evaluates its arguments regardless of whether the category is enabled. Server_ProtocolHandler now exposes a virtual logsDebugMessages() hook. The base implementation returns false, so handlers without a log destination spend nothing. AbstractServerSocketInterface overrides it with ServerLogger::isLoggingEnabled(), which checks the log file and the server/writelog setting that logMessage() itself consults. All debug message call sites check the hook before formatting. The client send/receive paths check QLoggingCategory::isDebugEnabled() first, the same pattern AbstractClient already uses for its slow-command warning. ISL message decoding does the same. Byte stream decoding called inputBuffer.remove(0, n) for the length header and then again for every message. Each call shifts all remaining bytes, so a read carrying k messages cost O(k * bytes remaining). The three receive loops (remote client, TCP server interface, ISL interface) now parse at a read offset and compact the consumed prefix once, when they stop because a full message is not buffered yet. No buffering or size-limit behavior changes. Also in this batch: - Server_ProtocolHandler::processGameCommandContainer() copied the whole games map under gameListMutex just to look up one game id. A new getGameInfo() performs the single lookup and returns the room/player ids. - The TCP receive loop's `ok` flag is initialized, so a ParseFromArray exception can no longer leave it indeterminate before `if (ok)`. - The exception log prints only the message being parsed instead of hex-dumping the entire pending buffer. Full build and ctest (628 tests) pass, including the server tests. * [Network] Address review comments - Move getGameInfo() out of the header into server_abstractuserinterface.cpp. - Drop the consumed prefix once after the parse loop instead of on every early return: the two "not enough data" exits now break out of the loop. Applied to the remote client, TCP server and ISL receive loops. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-25 12:49:24 +01:00
Neel Jogani	a4c4c67674	Fix tab retranslation (#7580) ... * Retranslate all open tabs on language change * Address review: deeper Visual DB retranslation, index-based Archidekt size logic In Qt 6, setItemText() on the current item emits currentTextChanged but not currentIndexChanged, so connecting the Archidekt combos to currentTextChanged fired a search on every language change. Both combos now use currentIndexChanged, and buildSearchUrl() compares the size-logic combo by index so translated labels cannot drop sizeLogic. * Derive display mode button text in one place	2026-10-25 12:30:17 +01:00
BruebachL	f33cfcb288	[UI] Show 'Password saved' placeholder when verifier is stored (#7649) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-25 10:34:56 +01:00
BruebachL	5fbc636f93	[Models] Use QCollator for natural, cached sorting (#7633) ... * [Models] Use QCollator for natural, cached sorting QString::localeAwareCompare rebuilds its collation data for every comparison, and it compares numbers as text. Keep one QCollator per model, enable numeric mode, and use it for the card name, set and user name sorts. Add a test that sorts "Forest 1", "Forest 2", "Forest 10" through DeckListSortFilterProxyModel and checks the natural order. * [Models] Sort naturally under the C locale too Numeric mode only takes effect through a real locale: under the C locale, which headless CI processes run in, QCollator silently falls back to string order and sorts "Forest 10" before "Forest 2". That made collator_sort_test fail on every Linux leg while passing locally. Add makeNaturalSortCollator(), which enables numeric mode and pins English only when the process locale is the degenerate one, and build the models' collators through it. Users with a real locale keep their own collation. * [Models] Fix compile of natural sorting (QStringView mismatch) * nit: initialize collators in member initializer lists * nit: namespace makeNaturalSortCollator under NaturalSort --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de> 2026-10-25-Development-3.1.2-beta.4	2026-10-25 01:01:04 +02:00
BruebachL	5ddfcd7ead	[Pictures] Watch the custom picture folder instead of polling (#7635) ... The local picture loader walked the whole custom picture tree every ten seconds on the GUI thread. Watch the root and every subdirectory with QFileSystemWatcher, debounce bursts of events into a single 500 ms refresh, and keep a five-minute fallback poll for filesystems where watching fails. Add an explicit-path constructor and indexedPaths() so the indexing can be tested without SettingsCache, and emit indexChanged() after a rebuild. Verification: cockatrice built. Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-25 00:36:14 +02:00
BruebachL	518c7e6125	[Network] Add a configured QNetworkAccessManager factory (#7628) ... * [Network] Add a configured QNetworkAccessManager factory Every HTTP caller built its own QNetworkAccessManager, so the system proxy and a transfer timeout were easy to omit. Add NetworkManagerFactory::create() as the single place that applies the process-wide proxy configuration and a transfer timeout, and use it at all 14 construction sites. Per-site settings such as disk caches and manual redirect policies stay with their callers. * [Tests] Link libcockatrice_network into the tests that compile its headers release_channel.cpp and card_picture_loader_worker.cpp now include libcockatrice/network/network_manager.h, but the test targets that compile them only linked libcockatrice_settings, so the include directory never reached them and every platform failed with "file not found": loader_local_matching_test and picture_loader_benchmark_test. libcockatrice_network is an INTERFACE library, so linking it costs these targets nothing but hands over the include path. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-25 00:33:43 +02:00
BruebachL	3b07b10b19	[Avatar] Respect EXIF orientation and decode at target size (#7634) ... Read the avatar with setAutoTransform(true) so camera orientation is applied, and ask QImageReader for a scaled decode at MAX_AVATAR_DIMENSION instead of decoding a full-resolution photo and scaling it afterwards. Verification: cockatrice built. Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-25 00:11:09 +02:00
BruebachL	66b9338c90	[QtUtils] Use makeScrollArea() for the remaining scroll areas (#7625) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 22:50:25 +02:00
BruebachL	77a3875c25	[VisualDatabase] Debounce filter refreshes with QtUtils::Debouncer (#7624) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 22:48:11 +02:00
BruebachL	28c8474f03	[QtUtils] Add Debouncer helper (#7623) ... * [QtUtils] Add Debouncer helper * Extract long message to variable before confirm() call --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 22:43:10 +02:00
BruebachL	11e2bb0d2f	[QtUtils] Adopt window fade, path, bold font and confirmation helpers (#7622) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 21:43:50 +02:00
BruebachL	eac149656b	[QtUtils] Add window fade, path opening, bold font and confirmation helpers (#7621) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 21:38:54 +02:00
BruebachL	e806085681	[QtUtils] Use makeLayout() for zero-margin layouts (#7620) ... * [QtUtils] Add parent lookup, layout clearing, scroll area and monospace helpers * [QtUtils] Adopt shared Qt helpers across the client * [QtUtils] Add layout creation and relayout helpers * Swap parameter order (spacing before margin) and remove static from relayout() * [QtUtils] Use relayout() after rebuilding dynamic layouts * [QtUtils] Use makeLayout() for zero-margin layouts * Consolidate setSpacing() calls into makeLayout() using new parameter order --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 19:06:18 +02:00
BruebachL	06b9ca368f	[QtUtils] Add layout creation and relayout helpers (#7619) ... * [QtUtils] Add layout creation and relayout helpers * Swap parameter order (spacing before margin) and remove static from relayout() --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 19:01:56 +02:00
BruebachL	67a212d677	[Theme] Drop stale pixmap caches on palette-only preview (#7600) ... A palette preview repaints widgets through applyStyleAndPalette without running themeChangedSlot, so generator-owned pixmaps stayed at the previous palette until the next full theme switch. Clear them where the palette is applied. Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 10:40:20 +02:00
BruebachL	4028606bd9	[CardDB] Clear CardInfo relations before deferred deletion (#7615) ... removeCard() and swapInDatabaseData() schedule CardRelation deletion with deleteLater(), but the owning CardInfo could outlive them through an external shared pointer and kept returning the freed pointers from getAllRelatedCards(). Add CardInfo::clearDirectRelations() and call it after scheduling deletion so the UI can no longer dereference dangling relations. Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 10:28:24 +02:00
Neel Jogani	6e770eb7b2	Retranslate Home tab when the language changes (#7579) ... * Retranslate Home tab when the language changes TabSupervisor::retranslateUi() never included the Home tab, and HomeWidget set its button text only once, when the buttons were created. Switching languages left the Home tab in the old language until it was reopened. Store the Home buttons as members, add HomeWidget::retranslateUi() to set their text, and call it from TabHome and TabSupervisor. The connect button text still only changes for the Connecting, Disconnected and LoggedIn statuses, as before. * Address review: plain ClientStatus, drop optional and placeholder	2026-10-24 08:35:31 +02:00
Neel Jogani	e73dd2b520	Refactor display type toggler and add language change handling in Vis… (#7581) ... * Refactor display type toggler and add language change handling in VisualDeckDisplayOptionsWidget * Address review: extract updateDisplayTypeButton(), document changeEvent * Restore trailing newline in visual_deck_display_options_widget.cpp	2026-10-24 08:34:19 +02:00
BruebachL	ab13a6748f	[QtUtils] Adopt shared Qt helpers across the client (#7618) ... * [QtUtils] Add parent lookup, layout clearing, scroll area and monospace helpers * [QtUtils] Adopt shared Qt helpers across the client --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 08:26:21 +02:00
BruebachL	1e0fc35d94	[QtUtils] Add parent lookup, layout clearing, scroll area and monospace helpers (#7617) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 08:26:02 +02:00
BruebachL	bbc6003f0a	[CrashReporting] Name the files and processes behind a failed installer purge (#7590) ... * [CrashReporting] Log which files and processes blocked the installer purge A purge that fails aborts the upgrade with a message that can only guess at the cause, and the log only listed which DLLs survived. Record what Windows reports for each survivor and which processes still have the install directory mapped, then repeat the holder list in the abort message. The diagnostics are additive and run only on the abort path: they open each survivor for DELETE access and close it again without deleting, so a failed upgrade can never end up half-removed. The purge itself is unchanged. * [CrashReporting] Name the holders of a failed purge with Restart Manager The process-and-module scan could only name a holder whose image lives in the install directory or that loaded one of its DLLs, so the case this diagnostic exists for - an antivirus scanner holding a plain handle - was reported as "no holder named, only a code". Reaching the Restart Manager from the NSIS script would have meant marshalling RM_PROCESS_INFO through System::Call as a table of hand-computed offsets, which cannot be checked without a Windows toolchain, and that is why it was dropped when this diagnostics was written. Move the call into tools/installer-holder-probe: a small executable the same Windows build compiles, linking nothing from this project so it still starts when the installed runtime is what the purge could not replace. It rides inside the installer and is extracted to $PLUGINSDIR only when the purge has already failed, so the successful path is unchanged and nothing new is installed. .ci/compile.sh runs it against a file held with FileShare.None on the Windows runners, so the lookup is exercised on real Windows instead of only compiled. * [CrashReporting] Fix the holder probe check and cap the holder line The probe block ran after the package steps, where the working directory is already the build dir, so its $BUILD_DIR-prefixed paths named build/build and the PowerShell file could not be written. Move it ahead of install/package, where the build dir is still the cwd, and name both files relative to it. Guard it on MAKE_NO_CLIENT, since the probe is only built with the client. Cap the rendered holder line at HOLDER_LINE_CHAR_MAX: the count limit alone does not keep long service names inside the NSIS string that also carries the abort text and the log path. Whole entries are kept and the rest counted, with the first holder always shown. Also run cmake-format on the probe's CMakeLists so the lint job accepts it. * [CrashReporting] Report a read-only purge survivor and bound the probe check --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de> 2026-10-24-Development-3.1.2-beta.3	2026-10-24 00:46:54 +02:00
BruebachL	ad4320cd7b	[CardDB] Stream card properties from blobs (#7608) ... * [CardDB] Stream card properties from blobs Parsed and cached cards used to keep a materialized QHash<QString, QString> for their properties: LazyPropertiesHash only deferred building that hash until the first query, and the cache writer re-serialized it on save. - LazyPropertiesHash answers value(), contains(), size(), isEmpty() and keys() straight out of the serialized blob, so a property query no longer builds a hash. - serialize() is public, and the cache writer passes the stored blob through instead of serializing a hash it just rebuilt. - CardInfo and PrintingInfo expose getPropertiesBlob() and getPropertyCount(); PrintingInfo::operator== compares key by key without materializing either side. - The XML parsers build cards via newInstanceFromPropertiesBlob(), which derives the simple name and the alternate names that the parser used to keep next to the hash. The reload cycle fix stays out of this change; it depends on changing the CardInfo self pointer and is reviewed separately. * [CardDB] Address review comments on streaming properties * [CardDB] Address final review nits on property streaming Move BlobReader and the blob accessors into LazyPropertiesHash as private members so the parsing helper is declared with the class instead of hiding in the translation unit. Add LazyPropertiesHash::serializedFrom() and use it where a PrintingInfo is built from a fresh property hash, replacing the nested LazyPropertiesHash(LazyPropertiesHash::serialize(props)) construction. The pre-materialized QHash constructor stays: CardInfo's non-blob factory still uses it for the oracle import path, and the tests cover it directly. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-24 00:17:31 +02:00
BruebachL	c25a2c5c3b	[CardDB] Avoid copying printing maps and property strings (#7605) ... * [CardDB] Avoid copying printing maps and property strings Reading a card's sets was a measured hotspot: `SetToPrintingsMap setMap = card->getSets();` copies the whole QMap, and then iterating it with a non-const iterator detaches and deep-copies every PrintingInfo, including its property hash, on first use. A micro-benchmark of that exact pattern (copy plus non-const iteration) came out about 19x slower than a const reference over the same data. The querier, the cache writer, the XML writer, the picture loader and the printing/set selection widgets now take `getSets()` by const reference and only use const iterators. The tests that iterate generated data are covered by the existing card database and picture loader suites. String accessors were also returning by value where the value lives in a hash that has already been materialized: - CardInfo::getProperty() and the legacy getCardType()/getColors()/ getManaCost()/getCmc()/getPowTough()/getLoyalty() accessors, - PrintingInfo::getProperty(), getUuid(), getFlavorName(), getArtist(), and getSet(), - ExactCard::getPrinting() and getCardPtr(), - CardSet::getShortName(), getLongName() and getSetType(). getPrinting() in particular copied a PrintingInfo on every call, and a copy of an unmaterialized PrintingInfo has to take the properties mutex. Callers that need an owned copy still get one; the rest just read. Other allocation removals in the same path: - LazyPropertiesHash::ensureMaterialized() checks an atomic flag before taking the mutex, so property reads after the first one do not lock. The flag is release-stored after materialization and acquire-loaded by readers/copies, preserving the existing locking for the first read. - CardSet::getCorrectedShortName() no longer rebuilds its QSet of reserved Windows file names on every call. - CardSet::getIsKnownIgnored() no longer formats the release date into a throwaway string just to check its length. - The querier builds its card-type/format count caches without `cards.values()` or a properties key list, reserves its result lists, and picks a random card without materializing `cards.keys()`. - The querier's pinned-printing path reuses the CardInfoPtr it already has instead of looking the card up again by name. - CardDatabaseCache/XML serialization copy the alt-name QSet by reference. - The picture loader compiles its !prop!/!set! regular expressions once instead of per URL template, and walks the transform map with an iterator instead of keys() plus operator[]. Full build and ctest (628 tests) pass. * [CardDB] Address review comments PrintingInfo is a value type: it is stored in QLists and returned by value from the querier, so a const-ref getter can hand out a reference into a temporary. Return the QStrings and the CardSetPtr by value again. The constFind lookup stays, so a property read still never materializes the lazy property hash - only the last shared-data refcount is paid. * [CardDB] Undo the const-ref QString return changes QString is implicitly shared, so returning by value costs only a refcount and avoids handing out references into a lazily materialized hash. The constFind lookups stay, so a property read still never materializes the hash. * [CardDB] Use QMap::asKeyValueRange() in transformUrl The range is a view over the map's own iterators and yields references to the stored key and value, so it keeps the no-allocation property of the manual const iteration. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-23 11:58:58 +02:00
BruebachL	b85436461e	[Filters] Precompute term data instead of redoing it per card (#7603) ... * [Filters] Precompute term data instead of redoing it per card Card filters are evaluated once per card in the database, and several attributes derived constant values from the filter term on every single evaluation: - acceptColor() ran up to twelve case-insensitive string replacements and a space strip for each card, then called getColors() again for every character of the term. - acceptRarity() ran the rarity abbreviation expansion loop per card. - acceptManaCost() uppercased and sorted the term per card, before sorting the card's own cost. - acceptLoyalty() and acceptFormat() trimmed/lowercased the term per card. - relationCheck() re-parsed the numeric operator and operand per card, for every cmc/power/toughness/loyalty comparison. The term of a FilterItem never changes, so these values are now computed once in the constructor and only the card-dependent part remains in the accept path. For colors this also removes the repeat getColors() call, which materializes the printing properties hash. Additionally: - CardInfoPtr is passed by const reference through FilterItemList, FilterItem and FilterTree instead of by value, removing an atomic refcount pair per card per filter node. - Main/sub type filtering no longer allocates a QStringList via split(); it looks the " - " separator up directly and compares QStringViews. - acceptSet() and acceptPowerToughness() fetch the printing/set or the power/toughness string once instead of once per branch/accessor. No filtering behavior is intended to change. Invalid numeric terms (for example a bare "<") now return false instead of indexing trimmedTerm[1] past the end. Verified with filter_string_test (42 tests) and a full client build. * [Filters] Address review comments - Replace the main/sub type separator accessor function with a plain namespace-scope constant. - Take card type, colors, cmc, loyalty, power/toughness and the printing's set by value; those getters already return by value. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-23 11:23:17 +02:00
BruebachL	f4b4365464	[Search] Stop allocating per card in card-name completion (#7604) ... * [Search] Stop allocating per card in card-name completion CardSearchModel::updateSearchResults() runs on every textEdited() signal, walks the whole card database and runs Levenshtein against every matching name. Three costs dominated that path: 1. Every candidate built a QStringList of its searchable names, then lowercased each name into another QString, only to break out of the loop after the first hit. 2. The sort comparator called sortableName() for each comparison, which re-fetched the name (QMap lookup plus QString construction) O(n log n) times. 3. levenshteinDistance() allocated a full len1 x len2 vector of vectors. The search model now lowercases the one name it tests directly, stores the tie-breaking name length once per result, and the comparator only compares integers. levenshteinDistance() uses the standard two-row formulation: same result, O(len2) memory instead of O(len1*len2), with early exits for empty and equal strings. FilterString query closures get the same treatment: - Set queries iterate the set map directly instead of materializing keys()/values() lists for every card. - Rarity queries iterate printings in place instead of copying them into a QList<PrintingInfo> first. - Power/toughness split the string with indexOf and compare QStringViews instead of allocating a QStringList. - Field queries do one hash lookup instead of contains() followed by value(). - Color queries bind the colors string by reference instead of copying. Verified with filter_string_test (42 tests) and a full client build. * [Search] Address review comments - Use std::any_of/std::none_of over the set map's key/value iterators instead of hand-rolled loops. - Extract the name matching into matchingLowercaseName() returning std::optional<QString>. - Reuse the matched name's length for the distance tie-break instead of looking the name up again, removing one getLocalizedName() call per card. - Take the color strings by value; the getters already return by value. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-23 11:23:04 +02:00
BruebachL	4980f88a7a	[CardDB] Sort power/toughness without splitting every comparison (#7607) ... * [CardDB] Sort power/toughness without splitting every comparison When the card database is sorted by the P/T column, lessThan() runs O(n log n) times over the whole view, and each call split both strings into a QStringList ("power/toughness") and then read the two elements back. For the roughly 36k cards in the database that is millions of list and string allocations, all for a value that contains at most one separator. The comparator now locates the single '/' with indexOf and passes the two halves as QStringView to lessThanNumerically(), which is changed from QString to QStringView. The numeric parsing, the "1+*" fallback and the locale-aware tie-break are unchanged, and strings with no separator or more than one still fall through to the plain string comparison, exactly as split()-based size checks did before. lessThanNumerically() also initializes its two bool out-parameters; they were declared uninitialized, which only worked because toFloat() always assigns them. Compared old and new comparator over a corpus of 2024 power/toughness strings (4096576 ordered pairs, including malformed values): zero differences. Full build and ctest (628 tests) pass. * Extract well-formedness checks in P/T comparator --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-23 10:34:13 +02:00
BruebachL	e666a4978d	[VisualDatabase] Use scoped QSignalBlockers for filter updates (#7641) ... * [VisualDatabase] Use scoped QSignalBlockers for filter updates updateFilterModel() blocked signals on the filter model and its filter tree,\nthen unblocked each of them twice. The second pair was a no-op only because\nthe first pair had already restored the default. Use two scoped\nQSignalBlockers instead, so the models are unblocked exactly once before the\nexplicit changed()/layoutChanged() notifications.\n\nVerification: cockatrice built. * Drop stale typo note from QSignalBlocker comment --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-23 10:33:29 +02:00
tooomm	c4c7cc0253	[README] Small tweaks (#7585)	2026-10-22 20:13:43 +02:00
BruebachL	0fe4fd0d8c	[CardDB] Guard guessCard and findPrintingWithId against missing cards (#7592) ... * [CardDB] Guard guessCard and findPrintingWithId against missing cards guessCard() dereferenced a null CardInfoPtr through findPrintingWithId() when the name was unknown and a providerId was given. Return an empty ExactCard instead, and make findPrintingWithId() null-safe for every caller. Add regression tests covering both paths. * [CardDB] Rely on PrintingInfo's default null set in findPrintingWithId The explicit nullptr was redundant: the constructor already defaults the set to null. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-20 21:33:56 +02:00
BruebachL	9980c90cea	[Filter] Allow spaces around the colon in search queries (#7529) ... * [Filter] Allow spaces around the colon in search queries * [Filter] Keep whitespace out of the color-identity operator Allowing `ws?` between `color` and the identity marker made `c i: g` parse as identity green, changing the meaning of text that previously read as a generic `c` plus a field query on `i`. Whitespace belongs around the separator, not inside an operator token: `ci : g` and `ci: g` stay valid, `c i: g` keeps its old parse. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-20 21:20:10 +02:00
BruebachL	9709fe4a1a	[FlowWidget] Restore arrow-key navigation for items in flow widgets (#7591) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-20 16:53:04 +02:00
BruebachL	829152f388	[Tooling] Add publish_beta.sh to automate Development beta tagging (#7505) ... Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-19 15:01:18 +02:00
BruebachL	c6f682f9cf	[CrashReporting] Offer to send the installer log on abort (#7524) ... * [CrashReporting] Installer log send offer on abort (inc 4) DSN parsed to CPACK_SENTRY_* (scheme-aware for http self-hosts) before include(CPack); new SendInstallerLog.ps1.in builds a byte-accurate Sentry envelope (128 KiB tail cap, X-Sentry-Auth, exit 0/1) with the abort reason read from the log file itself, so the NSIS side needs no string functions and quoting stays trivial. AbortInstall asks consent (attended installs only, silent path untouched, abort never swallowed). Empty/malformed DSN disables the offer; no secrets in repo. * [CrashReporting] Embed installer-log sender via a relative NSIS path The AbortInstall hook embedded SendInstallerLog.ps1 through the absolute CPACK_SENTRY_PS1_PATH, which carries CMake's forward slashes (D:/a/...). makensis does not treat a forward-slash drive path as absolute, so it resolved it relative to project.nsi, found nothing and aborted packaging on the Windows jobs of every branch in the stack. Embed it with the same '..\..\..\' relative path that already resolves NSIS.definitions.nsh: both are configure_file'd into the build root, three levels up from where CPack places project.nsi. Drop the now-unused CPACK_SENTRY_PS1_PATH cache variable. * [CrashReporting] Drop the installer /CRASHTEST hook, tidy the log sender Remove the /CRASHTEST switch and the matching COCKATRICE_SENTRY_DSN environment override on the installer abort path. With no deliberate in-installer trigger left, a package built without a baked DSN must never offer to post a user's log to an endpoint chosen by whatever happens to be in the environment, so the prompt is now gated on CPACK_SENTRY_ENABLED alone. This also retires the comment that claimed /S /R /CRASHTEST reaches the prompt: the switch was evaluated before /R set ReinstallMode, so that form never showed it. Alongside: correct the CPACK_SENTRY_RELEASE comment (PROJECT_VERSION keeps its "-<label>" on Development tags where CPACK_PACKAGE_VERSION does not), delete the unused CPACK_SENTRY_HOST/CPACK_SENTRY_PROJECT_ID cache vars, document the DSN regex's path-prefix fallback, log a declined send, keep the uploaded installer log free of helper-injected newlines, and bound the post with -TimeoutSec/-NonInteractive. * [CrashReporting] Derive the installer DSN vars as plain variables Review nit: every CPACK_SENTRY_* value is recomputed from COCKATRICE_SENTRY_DSN on each configure, so CACHE ... FORCE bought nothing. Set empty defaults once, override them in the match branch, and drop the duplicated else() copies. Still CPACK_-prefixed, so include(CPack) still snapshots them into CPackConfig.cmake. * [CrashReporting] Gate the installer log send at build time Review nit: test CPACK_SENTRY_ENABLED with the NSIS preprocessor instead of copying it into $SentryEnabled and branching at runtime, so a package built without a DSN compiles the prompt out rather than carrying dead code. The configure_file that produces the helper is gated the same way, so a build without reporting neither references nor embeds it. * [CrashReporting] Disclose the Windows user name in the send prompt Review nit: say that the log can include the Windows user name (a real part of what gets uploaded) and drop the "No account needed." clause, which answered a question the prompt never raised. * [CrashReporting] Show progress while the installer log is sent Review nit: DetailPrint a line before nsExec runs, so the details pane says something while the send is in flight instead of staying blank for up to the 60 s /TIMEOUT. * [CrashReporting] Rename the Sentry event local in the installer helper Review nit: $Event is a PowerShell automatic variable, so name the local $sentryEvent instead. Also drop $firstLine: Select-String returns the matching line alone, so the reason is already one physical line and the extra split added nothing. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de> 2026-10-19-Development-3.1.2-beta.2	2026-10-19 14:57:04 +02:00
BruebachL	9f59f5c495	[CrashReporting] Breakpad capture, session detection and symbol upload (#7523) ... * [CrashReporting] Breakpad everywhere, session detection, symbol CI (inc 3) Breakpad on all platforms (no crashpad packaging); remove the Windows MiniDumpWithFullMemory filter and the installer WER LocalDumps full-dump registration. QLockFile per-process session tracking replaces the Windows-only .dmp scan, placed after parser.process and the instance hand-off so help/version exits and handed-off secondaries never leak a lock. CI: Release-only DSN bake from SENTRY_DSN secret, tag-only sentry-cli symbol upload (org cockatrice, project native). Tests: 533/533 ctest green, format clean, code gate PASS. * [CrashReporting] Enable http_retry, harden symbol upload, fix NSIS context Sets sentry_options_set_http_retry so the cache_keep-held crash envelope in Ask mode is written with a retry filename and actually flushes on giveConsent() instead of sitting in <db>/cache until pruning. Adds continue-on-error to both sentry-cli install steps so a Sentry registry outage or broken Git Bash install cannot block release assets. Cleans the legacy WER CrashDumps folder under SetShellVarContext current (under all it resolves to ProgramData, not the user's AppData) in installer and uninstaller; registry delete works in either context. * [CrashReporting] Extract the startup crash-report flow from main() per review * [CrashReporting] Break up the CrashReporter class doc per review * [CrashReporting] Drop the invalid --release from the symbol upload `debug-files upload` never accepted `--release` (checked against the pinned sentry-cli 3.8.0: the subcommand declares --org/--project and a set of type/id/scan options, and execute() reads no release; the only global flags are --url/--header/--auth-token/--log-level/--quiet/--allow-failure). Clap rejects the unknown flag before any upload happens, so every tag build has been shipping without symbols, with continue-on-error keeping the release pipeline green. Release association is also the wrong mechanism: debug information files are matched to events by debug ID via the event's debug_meta. The Sentry release of a native event comes from the event itself (COCKATRICE_SENTRY_RELEASE), not from the DIF upload. Remove the flag and the now-unused SENTRY_RELEASE env from both invocations (Linux, and Windows/macOS). The symbol upload stays continue-on-error (a Sentry outage must not block the release assets); revisit once it has proven itself on a tag. * [CrashReporting] Split debug information out of packaged release binaries -g is required so the CI symbol upload has DWARF to send, but it was left in the shipped binaries too: the Linux Release client is 563 MiB, 552 MiB of it debug info, and every distribution channel pays for that. Keep the build tree unchanged (CI uploads symbols from build/) and strip only the packaged copy. A CPack pre-build script extracts each ELF's debug info to COCKATRICE_DEBUG_SYMBOL_DIR and then runs `strip --strip-debug --strip-unneeded`. .eh_frame is allocatable and survives, so unwinding is unaffected, and the build ID is identical in the stripped binary and the sidecar. Measured on a local Release build (GCC -O2 -g, WITH_CRASH_REPORTING=ON), bytes: binary build tree packaged before packaged after .debug sidecar cockatrice 590,722,560 590,722,560 28,086,480 579,623,576 oracle 53,432,608 53,432,608 1,649,888 52,075,344 tar.gz of both trees: 289,964,521 -> 19,018,058 (~15x smaller). Only ELF (Linux/BSD) is handled: Windows already links /DEBUG with separate PDBs, and macOS extracts a dSYM from the bundle. Opt-out via COCKATRICE_SPLIT_DEBUG_SYMBOLS; skipped with a warning when objcopy/strip are missing. CPACK_PRE_BUILD_SCRIPTS (not CPACK_INSTALL_SCRIPTS, which runs before staging) invokes it, and the script refuses to run unless CPACK_TEMPORARY_DIRECTORY is a real CPack staging tree so a missing variable can never turn its glob into a filesystem-wide walk. * [CrashReporting] Upload Windows PDBs from where Ninja actually puts them The Windows branch of the symbol upload looked in build/<target>/Release, which is the Visual Studio generator's layout. The Windows leg uses Ninja, which is single-config: linker PDBs land in build/<target>/, next to the binaries — the same paths the "[Windows] Upload PDBs" artifact step below globs with if-no-files-found: error. So paths was always empty on Windows, the step printed "No symbol paths found, skipping symbol upload" and exited 0: a silent no-op behind continue-on-error. Every Windows build would then report "A required debug information file was missing" for cockatrice.exe with a PDB-style debug id (GUID-age), exactly as if no upload step existed at all. Use the artifact step's globs. Also turn the empty-path case into a failure in both symbol steps: a silent skip is indistinguishable from a successful upload (which is how the wrong path went unnoticed), and continue-on-error already keeps a broken upload from failing the release. Verified by extracting both steps' run blocks and executing the Windows branch against a Ninja-style tree: it now passes the three linker PDBs to sentry-cli (and not the CMakeFiles/*.pdb intermediates), and exits non-zero with an ::error:: annotation when there is nothing to upload. * [CrashReporting] Archive PDBs on tag builds so a failed upload is recoverable The "[Windows] Upload PDBs" artifact step skipped tag builds (github.ref_type != 'tag'), so for a release the symbols existed only inside the Sentry upload — which is continue-on-error. A failed upload therefore lost the ability to symbolicate that release permanently: no rebuild produces the same PDB, since the debug id is a per-build GUID+age. That is how every Windows crash reported so far became unreadable. Archive the PDBs for tag builds as well, and order the step after "Upload to release" so a missing PDB can never block a release from being published. Retention stays at the repository default; nothing consumes the artifact automatically, it is the manual recovery path (gh run download <run> -n <name>-PDBs, then sentry-cli debug-files upload). Verified by re-parsing the workflow and asserting the step order (release -> PDBs -> attest) and the broadened condition. * [CrashReporting] Upload the Windows executables with their PDBs Sentry needs two things per image on Windows: symbolication and stack unwinding. The PDB covers symbolication, but for a 64-bit PE the Call Frame Information (.pdata/.xdata) lives in the executable and is not copied into the PDB, so uploading PDBs alone leaves the image at "Stack Unwinding: Missing". That is exactly what the event's Images panel showed for cockatrice.exe, while Sentry's own Microsoft symbol server resolved KERNELBASE.dll and ucrtbase.dll from the same dump. sentry-cli also needs the pair in the same invocation: only then does it associate the PE's code identifier with the PDB's debug identifier, otherwise "the identifiers diverge and Sentry might not be able to resolve the correct file for symbolication" (docs: Debug Identifiers). Do the same for macOS, where the dSYM carries the debug information but the Mach-O carries the unwind information, and include the executables in the symbol artifact so a re-upload still has the pair to offer. Verified by extracting the step and running both branches against stub harnesses: Windows passes the three exe/pdb pairs in a single sentry-cli invocation and still fails loudly on an empty tree; macOS passes the dSYM and the Mach-O together. * [CrashReporting] Upload the shipped Qt runtime DLLs too Qt ships no PDBs with its MSVC SDK, so every Qt frame in a crash report resolved to nothing: an image with neither PDB nor PE has no unwind information (on 64-bit Windows the Call Frame Information lives in the PE and is not copied into the PDB) and no symbol source to fall back on. The list is required-runtime.txt, the manifest .ci/compile.sh already asserts the installer against, so what gets uploaded is exactly what an install carries. Qt frames now get unwinding plus export-table names; line numbers still need Qt's debug information files, which the SDK omits. The guards are not cosmetic: the step runs under `bash -eo pipefail`, where a sed over a missing file or an unmatched ls glob aborts the whole step, and continue-on-error makes that look identical to a successful upload. * [CrashReporting] Upload only the binaries, archive symbols only on tags The Linux leg handed sentry-cli whole build directories: 471 candidate files, of which 7 were object files that can never match a stack frame. Only the three linked binaries carry the build-ids Sentry looks up; the packaged copy is split and stripped but keeps that same build-id. The Windows symbol archive ran on every packaging build even though only tag builds upload to Sentry, so a PR build paid for an artifact nothing could ever consume. Tags keep it as the durable copy for a failed upload. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-19 14:57:04 +02:00
BruebachL	ad0fd2d4b0	[CrashReporting] Sentry send path with consent gating (#7522) ... * [CrashReporting] Real send path with consent gating (DSN still placeholder) require_user_consent + give/revoke around the Ask dialog, message event with in-memory crash-log.txt bytes attachment, before_send scrubs message/logentry/breadcrumbs/data of cockatrice:// secrets. Failure box offers Save (shows path) / Discard (revokes + rejects) / Cancel (back to dialog); reject() override so X/Escape cannot bypass revocation; silent AlwaysSend path falls back to a local file. Empty DSN keeps the previous mock behavior byte-identical. Tests: 528/528 ctest green, format clean, code + UI gates PASS. * [CrashReporting] Attach crash log and user note to the pending crash event The redacted log used to ride a separate message event from the native crash (minidump + stack), forcing manual correlation in Sentry. Fold it into the pending crash envelope(s) instead by appending well-formed attachment items before consent releases them: sentry-native replays cached envelopes byte-for-byte (raw read, raw serialize in 0.17.3), so the appended crash-log.txt and user-note.txt items upload with the very event that already carries the dump and stack. Covers both storage locations: Ask mode's consent-held files in <database>/cache and AlwaysSend's transport-dumped files in <database>/<run>.run, which must be attached before sentry_init replays them. When no pending crash event exists (unclean exit without a native crash) the standalone message event remains as fallback, now also carrying the optional note. The dialog gains an optional free-text field ('Here's what I was doing...') that travels as user-note.txt; the mock JSON records it too. * [CrashReporting] Send PROJECT_VERSION as the Sentry release main() reported VERSION_STRING (PROJECT_VERSION_FRIENDLY) as the Sentry release — that carries a build date, so every build of the same version landed in its own release, and it never matched the installer, which reports CPACK/PROJECT_VERSION. Bake COCKATRICE_SENTRY_RELEASE= PROJECT_VERSION instead: date-free, identical between client and installer, and derived from the git tag on tag builds, so events, symbol uploads and the installer log all group under one release. * [CrashReporting] Friendlier crash dialog copy Reword the report dialog along a single friendly arc: headline ('Oops, we crashed — and now we need your help to make Cockatrice better!'), why helping is easy, exactly what gets collected (crash dump with stack trace, app version, OS info, redacted log excerpt), the value of each report ('better and less crashy for everyone'), and the consent choice ('Send and remember makes this automatic without interruption in the future'). The checkbox itself stays direction-neutral ('Remember my choice') because it also persists a 'Don't send' decision. * [CrashReporting] Log where crash reports go and warn when they cannot The client resolved COCKATRICE_SENTRY_DSN (environment over the baked-in value) without ever saying which one won, and sentry-native refuses to build a request for a DSN it considers invalid without reporting anything, so a tester pointing the client at a scratch project had nothing to go on when a crash never appeared. Say which DSN source won, and log the destination (host and project id, never the key) once the SDK is armed. Warn instead of staying quiet when no DSN is configured at all, when a DSN is malformed - disabling reporting rather than silently falling back to the project baked into the build, which is the rule the installer already follows in cmake/CrashReporting.cmake - and when the build was compiled without Sentry support. A deliberate Never-send stays at info level: that is a choice, not a misconfiguration. Also warn when a pending crash envelope was captured for a different destination than the session that will upload it. sentry-native posts every envelope with the DSN held in the transport state of the session doing the sending, and envelopes restored from disk are raw, so the "dsn" header of a cached envelope is never read: a crash captured for one project can be uploaded to another with nothing in the log to show it. Tests cover the DSN shape check (same unanchored pattern the build matches, so a DSN this build accepted is never rejected here), destination description without the key, and the mismatch detection, which stays quiet for a different key on the same project, unreadable files, and headers without a dsn. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-19 14:57:03 +02:00
BruebachL	6385f3fab3	[CrashReporting] Mock crash-report dialog and reporting preference (#7521) ... * [CrashReporting] Mock dialog, sentry skeleton and CI prerequisites Mock: DlgCrashReport preview dialog (no account needed, redacted log preview), CrashReportingMode Ask/Always/Never setting in DebugSettings, --simulate-crash flag and Help-menu preview entry. Send writes a local mock JSON only. Vendor sentry-native 0.17.3 via FetchContent behind WITH_CRASH_REPORTING (breakpad everywhere, backend none under sanitizers) plus a CrashReporter facade with early init and post-loop shutdown. DSN is a placeholder: empty CMake default with COCKATRICE_SENTRY_DSN env override, so SDK init is skipped and mock behavior is unchanged until a real DSN is configured. CI prerequisites riding here so every layer below builds green: libcurl dev plus CA bundles in the Linux images and CodeQL env, sentry Qt integration off (its own find_package cannot see the macOS thin Qt layout), and the StrFunc Using construction makensis requires. Tests: ctest green, format clean, code plus UI gates PASS. * [CrashReporting] Forward mode changes to SDK and fix Linux CI opt-in Connects PersonalSettings::crashReportingModeChanged to giveConsent()/revokeConsent() so switching from AlwaysSend to NeverSend (or Ask) mid-session reaches the SDK instead of leaving consent given until restart. Forwards WITH_CRASH_REPORTING into the docker container the way CCACHE_DIR is, so the Linux package leg actually builds with crash reporting ON instead of silently building OFF. * [CrashReporting] Give crash-report logging its own category per review * [CrashReporting] Drop unused DebugSettings constructor visibility per review * [CrashReporting] Document reporting modes on the enum per review * [CrashReporting] Match the dump scan to the writer's temp fallback Review nit: when the handler's SHGetKnownFolderPath lookup fails it writes to <temp>/../.., but the startup scan looked in QDir::tempPath(), so a dump produced through the fallback would never be found and its crash would never offer to be reported. Walk up the same two levels in the scan. The path is Windows-only (#ifdef Q_OS_WIN); the statements were compiled and run standalone against Qt 6 to confirm the API use. * [CrashReporting] Complete the dump-scan fallback path The previous commit walked the scan's fallback up two levels but dropped the CrashDumps/Cockatrice suffix that the writer appends unconditionally, so a dump written through the fallback was still invisible to the scan. Evaluate the writer's expression verbatim rather than mirroring it with QDir: cdUp() is existence-checked and silently leaves the path alone when the directory is missing, parent_path() is not, and QDir::absoluteFilePath() joins the shared suffix without risking a doubled separator when the walk lands on a root. Verified by compiling the block verbatim against Qt 6 with -Wextra -Werror and comparing it with the writer's join for both the normal and the fallback case. Also record that %LOCALAPPDATA% is the scan's stand-in for FOLDERID_LocalAppData and why the two normally agree. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-19 14:57:03 +02:00
Zach H	ea6af0048c	[Server] Parse the rightmost address from forwarded header lists (#7586) ... X-Forwarded-For carries a comma-separated list, and constructing a QHostAddress from the raw header value returns a null address for it, so a configured X-Forwarded-For or a multi-hop header never resolved and websocket clients stayed on the proxy's address. - Add parseForwardedAddress, returning the rightmost usable entry of a forwarded header list - Use it for the websocket handshake instead of parsing the raw value - Exempt loopback from per-address auth rate limits so a same-host proxy with a customized trusted_sources list cannot lock every user out - Add forwarded_address_test Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-18 16:53:55 -04:00
Zach H	46cdbac830	[Servatrice] Match trusted_sources by address, not substring (#7582) ... trusted_sources was checked with QString::contains. A dual-stack listener reports a local proxy as ::ffff:127.0.0.1, which never matches the default "127.0.0.1,::1". Behind nginx the forwarded client IP header was then ignored, every websocket user shared the proxy's address, and logins failed with "too many concurrent connections" once max_users_per_address was reached. Add isTrustedSource(), which parses each entry as a QHostAddress and compares exact addresses with IPv4-mapped addresses normalized, and use it at all four call sites. The ban command also read server/trusted_sources instead of the documented security/trusted_sources; it now uses the same getter. Entries that are not IP addresses are logged at startup since they no longer match anything. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-18 16:50:04 -04:00
BruebachL	4343544588	[Client] Settings: isolate the selected section when drilling down (#7488) ... * [Client] Settings: isolate the selected section when drilling down Show only the selected section's group box. Restore the overview on page rows. Filter search results to the control's containing section. Reset the scroll position on every change. Reworked to stay in the enlarged modal instead of the settings tab. * [Client] Settings: re-clicking an isolated section restores the overview * [Settings] Keep section row selected when drilling down per review * [Settings] Stop stealing nav selection mid-gesture per review * [Settings] Sample nav selection pre-press so re-click detection works per review * Don't flash the section on drill-down * [Client] Settings: clear the section filter when selecting the page row per review onTabClicked() returned early for the already-current page before switchPageContent() could call applySectionFilter(index, nullptr), so clicking the page row while a section was isolated moved the selection but left the page filtered. Only skip the restore when no section is isolated. * [Settings] Select the search result's section in the sidebar per review Reaching a setting through the search isolated its section and flashed the widget, but left the navigation selection on the page row, so the sidebar looked like it had only jumped to the section's page. Extract the section-row selection shared with drill-down into selectSectionRow() and use it for search results too, keeping the gesture/re-click behavior untouched. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-18 22:48:52 +02:00
BruebachL	4750e67b7f	[Client] Settings: sub-page rows deep-linking into page sections (#7487) ... Add AbstractSettingsPage::getSections built from each page's group boxes. Show each multi-group page's sections as child rows in the navigation tree. Section rows show the parent page and scroll to and highlight the group box. Start pages collapsed. Keep single-group pages flat. Reworked to stay in the enlarged modal instead of the settings tab. Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-18 22:48:51 +02:00
BruebachL	4974cac59a	[Client] Settings: add top-right cogwheel shortcut (#7485) ... * [Client] Settings: add top-right cogwheel shortcut Add a subtle flat settings button to the tab bar corner that opens the settings dialog via the existing menu action slot. Icon and tooltip follow the menu action in retranslateUi. * [Client] Settings: flat black-cogwheel corner entry per review --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-18 22:48:51 +02:00
BruebachL	860625be4d	[Client] Settings: grouped left navigation for settings pages (#7484) ... * [Client] Settings: grouped left navigation for settings pages Replace the top icon-button bar in SettingsView with a grouped left QTreeWidget: Application, Cards and Data, Chat and Sound, Advanced. The active page is the selected row (palette highlight); search mode hides the tree; group headers expand but never select. Page tr() contexts stay DlgSettings; new group names are SettingsView strings. Reworked to stay in the enlarged modal instead of the settings tab. * [Settings] Make groupedPages static const per review --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-18 22:48:50 +02:00
BruebachL	665f7267e4	[Client] Settings: enlarge the settings dialog (#7483) ... * [Client] Settings: enlarge the settings dialog Keep settings modal per review: size to ~90% of the main window (5% margins each side) with screen fallback, size grip and 750x700 minimum bounded to the screen. Drops the tab approach while giving dense pages room without the tab-switch friction. * [Client] Settings: clamp dialog width to 1280 per review * [Client] Settings: extract dialog size calculation per review Move the host/screen target math out of the DlgSettings constructor into a calculateDialogSize helper. Drop the leftover 'per review' wording from the clamp comment. No behavior change. --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-18 22:48:50 +02:00
BruebachL	679762c624	[Client] Settings: extract SettingsView from DlgSettings (#7482) ... * [Client] Settings: extract SettingsView from DlgSettings Move the search bar, tab bar, stacked pages and search results out of DlgSettings into a reusable SettingsView widget. The dialog becomes a thin frame (title, OK button, close validation) delegating to the view. No visual or behavior change; tr() contexts preserved as DlgSettings. * [Client] Settings: match CI clang-format-18 line breaking --------- Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-18 22:48:50 +02:00
tooomm	a12b97ec50	[Translation] Move config into git version control (#7575) ... * Create transifex.yml * Update transifex.yml * Update and rename transifex.yml to transifex_github_config.yml * Update and rename transifex_github_config.yml to github_integration_config.yml	2026-10-18 14:29:51 +02:00
RickyRister	b849a57dab	[TabRoom] Fix compile failure due to unused lambda capture (#7577)	2026-10-18 11:10:26 +02:00
BruebachL	4c03e0062b	[CI] Detect 64-bit Windows NSIS builds via pointer size, not generator platform (#7573) ... CMAKE_GENERATOR_PLATFORM is Visual-Studio-only and stays empty under the Ninja generator that Windows CI switched to in #7380, so TRICE_IS_64_BIT was always 0 and every Windows artifact was mislabeled 32-bit. That fired the installer's 'installing a 32-bit version on a 64-bit system' warning and routed a genuinely 64-bit build into Program Files (x86) with the 32-bit registry view. Use CMAKE_SIZEOF_VOID_P, which reflects the actual target architecture for every generator (same test FindVCredistRuntime.cmake already uses). Co-authored-by: Lukas Brübach <Bruebach.Lukas@bdosecurity.de>	2026-10-17 22:35:27 +02:00
dependabot[bot]	fe8a3f486b	Bump actions/upload-artifact from 4 to 7 (#7574) ... Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 4 to 7. - [Release notes](https://github.com/actions/upload-artifact/releases) - [Commits](https://github.com/actions/upload-artifact/compare/v4...v7) --- updated-dependencies: - dependency-name: actions/upload-artifact dependency-version: '7' dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-10-17 22:08:33 +02:00
transifex-integration[bot]	12587e2da9	Updates for project Cockatrice and language ru (#7561) ... * Translate oracle_en@source.ts in ru [Manual Sync] 71% of minimum 5% translated source file: 'oracle_en@source.ts' on 'ru'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format * Translate cockatrice_en@source.ts in ru [Manual Sync] 48% of minimum 5% translated source file: 'cockatrice_en@source.ts' on 'ru'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --------- Co-authored-by: transifex-integration[bot] <43880903+transifex-integration[bot]@users.noreply.github.com>	2026-10-17 16:43:14 +02:00
transifex-integration[bot]	c9650db87e	Updates for project Cockatrice and language yue (#7569) ... * Translate oracle_en@source.ts in yue [Manual Sync] 82% of minimum 5% translated source file: 'oracle_en@source.ts' on 'yue'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format * Translate cockatrice_en@source.ts in yue [Manual Sync] 43% of minimum 5% translated source file: 'cockatrice_en@source.ts' on 'yue'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format * Translate oracle_en@source.ts in yue [Manual Sync] 82% of minimum 5% translated source file: 'oracle_en@source.ts' on 'yue'. Sync of partially translated files: untranslated content is included with an empty translation or source language content depending on file format --------- Co-authored-by: transifex-integration[bot] <43880903+transifex-integration[bot]@users.noreply.github.com>	2026-10-17 16:41:32 +02:00