The refactored tests were written in recognition that Mac and iPhone current working directories are usually not going to work. Resource directories are in bundles and write directories are restricted to certain areas. In theory, other platforms may have this problem too, hence the refactoring.
Also updated the Xcode iPhone project to use 3.2 as the Base SDK, but 3.1 as the Deployment SDK (for iPhone/iPad compatibility.)
The Mac OS X project has a new target called testsdl which builds the automated test. I looked at using Xcode's native unit test support, but the impedance mismatch between the existing automated test structure and Apple's was more than I could handle.
As such, the testsdl application is a full blown proper OS X application, which means it is a self-contained .app bundle. This immediately revealed some problems from the automated test. The largest problem was the assumption about the current working directory and where to find resources. (I suspect Windows may have a similar problem depending on circumstance.) To open resources, the test was looking in directories relative to the SDL source directory, but this will not work well with self-contained .app bundles and Xcode which can place its built applications almost anywhere. And for real-world situations, this is pretty useless anyway.
So I modified SDL_RWFromFile to do special things on OS X. First, it will look for a file in the .app bundle. If not found, it will fallback and just call fopen as it used to do.
I also had to modify the automated test itself because it had a contrieved test which called fopen directly to do read from an existing FILE pointer. In addition, there was a write test. Since a .app bundle is likely going to be read-only, I added a special case for OS X to write to NSTemporaryDirectory.
I expect these changes should work for both Mac and iPhone OS (which includes iPad).
I will update the iPhone Xcode project next.
Finally, FYI, the X11 automated test seems to be failing. Below is my output.
Pending breakpoint 4 - "-[NSException raise]" resolved
Platform : All tests successful (2)
SDL_RWops : All tests successful (5)
Rect : All tests successful (1)
SDL_Surface : All tests successful (6)
Rendering with cocoa driver : All tests successful (3)
Assert Failed!
Blit output not the same.
Test Case 'Renderer x11'
Test Suite 'Rendering with x11 driver'
Last SDL error ''
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Rendering with x11 driver : Failed 1 out of 4 testcases!
Rendering with dummy driver : All tests successful (3)
SDL_Audio : All tests successful (1)
Tests run with SDL 1.3.0 revision 1095906
System is running Mac OS X and is little endian
* Switched event type to enum (int32)
* Switched polling by mask to polling by type range
* Added SDL_RegisterEvents() to allow dynamic user event registration
* Spread events out to allow inserting new related events without breaking binary compatibility
* Added padding to event structures so they're the same size regardless of 32-bit compiler structure packing settings
* Split SDL_HasEvent() to SDL_HasEvent() for a single event and SDL_HasEvents() for a range of events
* Added SDL_GetEventState() as a shortcut for SDL_EventState(X, SDL_QUERY)
* Added SDL_FlushEvent() and SDL_FlushEvents() to clear events from the event queue
Renamed SDL_RenderPoint() and SDL_RenderLine() to SDL_RenderDrawPoint() and SDL_RenderDrawLine().
Added API for rectangle drawing (as opposed to filling)
Added placeholder API functions for circles and ellipses ... I'm not sure whether these will stay.
Optimized software line drawing quite a bit.
Added support for Wu's anti-aliased line drawing, currently disabled by default.
The thread ID is an unsigned long so it can hold pthread_t so people can do naughty things with it.
I'm going to be adding additional useful thread API functions, but this should prevent crashes in people's existing code on 64-bit architectures.
Use the Cohen-Sutherland algorithm for line clipping which uses integer math and preserves ordering of clipped points.
Removed getopt() support in testsdl.c, replaced with simple argv scanning.
* Added display parameter to many internal functions so video modes can be set on displays that aren't the public current one.
* The fullscreen mode is associated with fullscreen windows - not displays, so different windows more naturally have a mode associated with them based on their width and height. It's no longer necessary to specify a fullscreen mode, a default one will be picked automatically for fullscreen windows.
Daniele Forghieri 2009-09-30 15:48:24 PDT
Some tests doesn't use the correct include statement (and there are some
missing declaration) and some test use C++ variable after statement, preventing
compile wicth Open Watcom
The patch attached fixes this
Matej 2009-01-08 09:25:34 PST
Hello,
I maintain a cross-platform project that uses SDL.
One of the users who runs OSX has told me that he has problems with linking to
SDL due to missing -framework option.
I think that the problem is because of this:
'sdl-config --libs' outputs '-L/opt/local/lib -lSDLmain -lSDL
-Wl,-framework,Cocoa'
All the options are passed to the linker except the last one. I think that the
good output should be just:
'-L/opt/local/lib -lSDLmain -lSDL -framework Cocoa'
since those options (--libs) are passed to the linker, so the '-Wl' option is
redundant and possibly harmful in this very case
I use autotools with libtool to do the build...
Regards,
Matej
The linux code appears to be complete and *should* be the base of all Unix and GCC based versions. The macosx and win32 versions
are currently just copies of the dummy code. I will begin working on the windows version as soon as this check in is done. I
need someone to work on the Mac OS X version.
I'm afraid that this check in will break QNX (Sorry!)
/test/testatomic.c performs absolutely basic tests to show that the function work as expected. Need a second test to do more detailed tests.
/include/SDL_atomic.h provides declarations for all included functions.
/src/atomic/linux/SDL_atomic.c provided all the functions. On a generic built the 64 bit functions work, but they are emulated. On a build for -march=pentium and above the 64 bit functions use native instructions
/src/atomic/dummy/SDL_atomic.c emulates all the operations using SDL_mutex.h.
/src/atomic/win32/SDL_atomic.c is a copy of dummy
/src/atomic/macosx/SDL_atomic.s is a copy of dummy
These versions of SDL_atomic.c provide a frame work for building the library with a mixture of native and emulated functions. This allows the whole library to be provided on all platforms. (I hope.)
I hope this fits with the SDL philosophy of either providing a common subset or emulating when the platform is missing a feature.
I have not added dummy, macosx, or win32 to the build. They are there as place holders for future work.
I have modified congifure.in to compile sources in /src/atomic/linux. (The SDL configure.in file is an amazing piece of work and I hope I didn't mess it up. :-)
It also update configure.in to compile the linux version of the library. The three versions are all dummies
implementations that do nothing. They are being checked in as place holders. Mostly, I just wanted to get
place holders and the configure.in checked in.
