It looks like newer kernels do the logical device mapping in the driver,
so this code crashes. I don't have one of these nor do I have remote
access to debug this, so I'm disabling the logical mapping for now.
--HG--
branch : SDL-1.2
We don't need to look in the library's install dir for dependencies;
They are all system libraries that should be in other path lists anyhow.
Fixes Bugzilla #499.
--HG--
branch : SDL-1.2
Hi all,
I wrote a patch, which allows user to rotate the screen in case of fbcon driver.
The rotation angle is controlled by SDL_VIDEO_FBCON_ROTATION environment variable and possible values are:
not set - Not rotating, no shadow.
"NONE" - Not rotating, but still using shadow.
"CW" - Rotating screen clockwise.
"UD" - Rotating screen upside down.
"CCW" - Rotating screen counter clockwise.
The patch is based on wscons driver, written by Staffan Ulfberg.
I tested it on
Device: Sharp Zaurus SL-C1000
SDL version: 1.2.13
Kernel version: 2.6.24.4
Best regards,
Vitaly.
--HG--
branch : SDL-1.2
Armin Burgmeier 2009-03-15 04:35:45 PDT
When I hold a mouse button down on another (non-SDL) window, then move the
mouse over an SDL window and releasing the mouse button there, then the
application does not receive an SDL_ACTIVEEVENT with state SDL_APPMOUSEFOCUS
and gain 1.
Furthermore, SDL_GetAppState() reports the application not having mouse focus
until moving the mouse out of the window and back in again.
--HG--
branch : SDL-1.2
rainer canavan 2009-03-29 12:30:12 PDT
add default visual to this->hidden->visuals
X11_SetIcon appears to have problems getting the correct bpp for the default
visual of my screen. With larger icons, this causes a segfault somewhere in
libX11. Instead of adding the default visual to the internal list, I can work
around this problem (both the segfault and the distortion) by setting bpp to 32
before sicon = SDL_CreateRGBSurface(...) in X11_SetIcon, although with this
patch, it stays at 24.
--HG--
branch : SDL-1.2
Tomi Belan 2008-05-03 00:52:32 PDT
If you release a mouse button while an application is minimized, the
application won't notice it and will still report the button is pressed.
--HG--
branch : SDL-1.2
Don't clamp the mouse coordinates to the video surface size, instead clamp them to the last known window size.
This allows users to get the correct mouse coordinates even if they don't call SDL_SetVideoMode() in response to an SDL_VIDEORESIZE event (used as a hack to retain the OpenGL context on Windows and Linux after a window resize)
--HG--
branch : SDL-1.2
Max Horn 2009-09-24 13:16:05 PDT
Current SDL 1.2 SVN luckily builds on several systems now: 10.4 (PPC and 32bit intel), 10.5 (32 bit) and 10.6 (32 bit). However, it fails to build on 10.5 in 64 bit mode
--HG--
branch : SDL-1.2
Ryan C. Gordon 2009-09-19 08:25:21 PDT
This line in SDL_iconv_string (src/stdlib/SDL_iconv.c) ...
if (!fromcode || !*fromcode) {
tocode = "UTF-8";
}
Is probably supposed to assign to "fromcode" and not "tocode".
--HG--
branch : SDL-1.2
Nicholas Phillips 2009-04-26 21:34:05 PDT
I am using x64 Linux (using Intel Core 2 DUO), and I have noticed that there is
an error in SDL_cpuinfo.c, function CPU_getCPUIDFeaturesExt for my platform.
--HG--
branch : SDL-1.2
Mike Blaguszewski 2009-03-23 13:32:22 PDT
Patch to 1.2 HEAD that fixes the issue
Fixes bug in SDL 1.2.13 where clicking on an app's title bar to activate the
app, when cursor capturing is enabled, will cause the window to jump. This is
because SDL's handler for activate events calls a low-level Quartz function to
move the cursor. Calling this when the mouse is down in the title bar confuses
the WindowServer into thinking the title bar has been dragged. The patch defers
processing of activate events in this case.
The bottom line is that CGWarpMouseCursorPosition() is not safe to call when
the mouse in down in a window's title bar.
--HG--
branch : SDL-1.2
Andrey 2009-09-21 19:14:43 PDT
gapi->hiresFix depends on the parameters GetSystemMetrics (SM_CXSCREEN) and
GetSystemMetrics (SM_CXSCREEN).
After the "Open GAPI display" they are changing.
Small patch fixed it.
--HG--
branch : SDL-1.2
Philipp Nordhus 2008-11-05 13:56:33 PST
The Linux version of SDL_SYS_JoystickQuit() tries to free an invalid pointer
when the number of joysticks was reduced since the last call.
Reproduce: Connect two joysticks, call SDL_Init() and SDL_Quit(), then
disconnect one joystick and call the functions again.
--HG--
branch : SDL-1.2
Lorenzo Desole 2009-04-19 07:36:10 PDT
I am one of the developers of a multimedia application (My Media System MMS),
which uses SDL.
MMS is normally running in fullscreen mode but it switches it off before
launching external applications (mplayer, xine, etc.).
The problem with fullscreen is that when the latter is switched off either via
SDL_WM_ToggleFullScreen() or SDL_SetVideoMode(), SDL compares the current
screen sizes with the ones saved when the video system was initted, and if they
don't match, it calls XF86VidModeSwitchToMode() to switch to the old modeline.
This makes it impossible for external programs and for MMS itself to use RandR
to change the screen size, because next time fullscreen mode is turned off, it
bombs out with the following error:
X Error of failed request: BadValue (integer parameter out of range for
operation)
Major opcode of failed request: 136 (XFree86-VidModeExtension)
Minor opcode of failed request: 10 (XF86VidModeSwitchToMode)
[...]
Obviously this happens only if the new screen resolution is smaller than the
original one and XF86VidModeSwitchToMode() can't succeed.
I couldn't find any way to inform SDL that the screen resolution it uses as
reference is no longer valid.
This can be fixed by adding "save_mode(this)" to
./src/video/x11/SDL_x11modes.c, API X11_EnterFullScreen(_THIS), like this:
int X11_EnterFullScreen(_THIS)
{
int okay;
+ save_mode(this);
I can't rule out possible side effects, but I don't see any.
While I admit this is a minor issue for the general users, it is a major
showstopper for our program where the ability to change screen resolution and
refresh rate according to the movie being played, is very important.
Thanks in advance.
--HG--
branch : SDL-1.2
fuzzyTew@gmail.com 2009-03-14 15:18:45 PDT
Created an attachment (id=305) [details]
patch to change HAVE_ICONV to HAVE_ICONV_H
There are two separate iconv checks in configure -- one for the header file and
one for the library. include/SDL_stdinc.h uses the library define to see
whether or not it should reference the types defined in the header, which
naturally breaks if the library exists and the header does not.
--HG--
branch : SDL-1.2
Matej 2009-01-08 09:25:34 PST
Hello,
I maintain a cross-platform project that uses SDL.
One of the users who runs OSX has told me that he has problems with linking to
SDL due to missing -framework option.
I think that the problem is because of this:
'sdl-config --libs' outputs '-L/opt/local/lib -lSDLmain -lSDL
-Wl,-framework,Cocoa'
All the options are passed to the linker except the last one. I think that the
good output should be just:
'-L/opt/local/lib -lSDLmain -lSDL -framework Cocoa'
since those options (--libs) are passed to the linker, so the '-Wl' option is
redundant and possibly harmful in this very case
I use autotools with libtool to do the build...
Regards,
Matej
--HG--
branch : SDL-1.2
Andrey 2009-09-14 21:16:53 PDT
WinCE GetCursorPos fixed
I'm using iPAQ HP rx5919, with Windows Mobile 5.
And I also use mingw32ce 0.59.1 toolchain.
I fixed this, see attachment patch.
--HG--
branch : SDL-1.2
Nomad 2009-02-08 10:34:43 PST
The 2nd init is good.
The problem is in "SDL_dibevents.c"
in DIB_CreateWindow()
in SVN:
{
char *windowid = SDL_getenv("SDL_WINDOWID");
SDL_RegisterApp(NULL, 0, 0);
... using of data to which windowid is points
problem:
SDL_RegisterApp() may call SDL_getenv() and windowid will point to some
wrong string
solve:
char *windowid;
SDL_RegisterApp(NULL, 0, 0);
windowid = SDL_getenv("SDL_WINDOWID");
--HG--
branch : SDL-1.2
Derek Weitzel 2009-08-11 12:17:09 PDT
Window Manager: xorg-x11-twm-1.0.1-3.1
Running through Xdmx. The same application could expand to the full screen
using GLUT (freeglut).
Overview:
While running on a very high resolution display, discovered the maximium width
of the window is 4096.
--HG--
branch : SDL-1.2
Ken Bull 2009-02-25 13:22:02 PST
Adds Doxygen support for all headers (except config and boilerplate headers) in
the include folder for SDL-1.2 revision 4446.
While in general SDL is quite thoroughly commented, none of these comments are
correctly formatted for Doxygen and are generally inconsistent in their
formatting.
--HG--
branch : SDL-1.2
