ignore .xz files

Properly default to UTF-8, expose (f)truncate, remove old malloc lock/unlock stubs

.gitignore

@@ -1,4 +1,8 @@
 config.sh
 .devkitARM*
 .devkitPPC*
-.devkitPSP*
+.devkitA64*
+*.xz
+*.gz
+*.bz2
+*~

README.TXT

@@ -1,59 +1,91 @@
 devkitPro build scripts
 --------------------------
 
-This readme will guide you through building devkitARM, devkitPPC or devkitPSP from source using a set of scripts.
+This readme will guide you through building devkitARM, devkitPPC or devkitA64
+from source using a set of scripts.
 
-To use these scripts under minsys and MinGW you will need some additional packages over and above the base install.
+Please note that we can't guarantee that what you build with these scripts
+will function in the same way as the binaries we distribute. Where possible
+you should use the binary distributions. We also offer no support for any
+problems you may encounter with these scripts.
 
-The minsys developer toolkit
+The windows versions of the toolchains are now cross compiled on linux using
+mingw-w64
 
-http://prdownloads.sourceforge.net/mingw/msysDTK-1.0.1.exe?download
+Preparing to build
-
+--------------------------
-Bison, Flex and Wget from the gnuwin32 project
-
-http://sourceforge.net/projects/gnuwin32/
-
-For devkitPSP a command line subversion client is required to get the PSP SDK http://www.tigris.org
 
 required packages for building on debian/*buntu
 
-sudo apt-get install build-essential autoconf automake bison flex libncurses5-dev libreadline-dev texinfo
+sudo apt-get install build-essential autoconf automake bison flex libncurses5-dev
+libreadline-dev texinfo pkg-config
 
-for building gcc libgmp, libmpfr and libmpc are required
+For building gcc libgmp, libmpfr and libmpc are required - these are built as
+static libraries to make packaging simpler. If you're building the tools for
+personal use then the versions packaged by your chosen distro should suffice.
 
 http://gmplib.org/
 http://www.mpfr.org/
 http://www.multiprecision.org/
 
-Some of the tools for devkitARM and devkitPPC also require FreeImage and zlib
+sudo apt-get install libgmp-dev libmpfr-dev libmpc-dev
+
+Some of the tools for devkitARM and devkitPPC also require FreeImage, zlib,
+expat, and libusb. Again these are built as static libraries for ease of
+packaging but you can probably use the versions supplied by your distro.
 
 http://freeimage.sourceforge.net/
 http://www.zlib.net
+http://www.libusb.org
+http://expat.sourceforge.net/
 
-Downloading the source packages
+sudo apt-get install libfreeimage-dev zlib1g-dev libusb-dev libudev-dev libexpat1-dev
--------------------------------
 
-When you run the build script it will ask you to choose from one of two options, one for if you have already downloaded the source packages and another for if you want it to download them for you (using wget or curl).
 
-The top level shell script has now been unified and offers the option of devkitARM, devkitPPC or devkitPSP.
+Building gxtexconv for cube/wii needs GL/gl.h which can be obtained with
+
+sudo apt-get install mesa-common-dev
+
+Tools for devkitA64 require liblz4.
+
+http://lz4.github.io/lz4/
+
+sudo apt-get install liblz4-dev
+
+The liblz4 with Ubuntu 14.04 isn't new enough. Either upgrade to at least 16.04 or
+build this from source.
+
+For building the OSX versions we install the Xcode commandline tools and build
+pkg-config from source as well as static versions of the libraries listed above.
+This helps keep the dependencies to a minimum so end users can use the tools
+with only Xcode command line tools to obtain make.
+
+To avoid having to manually answer prompts during the build the script will
+read variables from config.sh if it exists. Copy config.sh.sample to config.sh
+and set the variables as appropriate for your build.
+
+The script will download the source packages it needs. These will be downloaded
+to the script directory by default but you can set BUILD_DKPRO_SRCDIR if you want
+to put them somewhere else.  When its finished you have the option to delete
+all temporary files, sources and their source packages.
+
 
 Building the devkits
 --------------------
 
-Simply run the "build-devkit.sh" script in the same directory as this text file as shown below, then follow the prompts;
+Simply run the "build-devkit.sh" script in the same directory as this text file
+as shown below, then follow the prompts;
 
 ./build-devkit.sh
 
-Once the script finds the source packages they will be decompressed and the build process will begin.  When its finished you have the option to delete all temporary files, sources and their source packages.
+Several examples tarballs are provided for the platforms supported by devkitARM &
-
+devkitPPC, these include basic templates for starting your own projects.
-To avoid having to manually answer prompts during the build the script will read variables from config.sh if it exists. Copy config.sh.sample to config.sh and set the variables as appropriate for your build.
+See http://wiki.devkitpro.org/index.php/Getting_Started for links.
-
-Several examples tarballs are provided for the platforms supported by devkitARM & devkitPPC, these include basic templates for starting your own projects. See http://wiki.devkitpro.org/index.php/Getting_Started for links.
 
 Using devkitARM
 ---------------
 
-to use the built in crt0 and linkscript use arm-eabi-gcc to link your project
+to use the built in crt0 and linkscript use arm-none-eabi-gcc to link your project
 
 Several specs files are built in for the various platforms
 
@@ -65,25 +97,21 @@ Several specs files are built in for the various platforms
 	-specs=ds_cart for a DS arm7 binary which runs from GBA cart.
 	-specs=gp32.specs for standard GP32 app.
 	-specs=gp32_gpsdk.specs for official gamepark SDK GP32 app.
+	-specs=3dsx.specs for a 3DS homebrew binary.
 
 Using devkitPPC
 ---------------
 
-to use the built in crt0 and linkscript use powerpc-gekko-gcc to link your project, using the command line switch -mgcn for a bare bones system, -mogc to use libogc and the multi-threaded microkernel for gamecube, -mrvl for wii.
+to use the built in crt0 and linkscript use powerpc-eabi-gcc to link your project,
+using the command line switch -mgcn for a bare bones system, -mogc to use libogc and
+the multi-threaded microkernel for gamecube, -mrvl for wii, -mwup for wii u.
 
-Using devkitPSP
----------------
-
-All you need to do now to use devkitPSP is make sure that your freshly built tools are in your PATH, something like this;
-
-export PATH=$PATH:<path to devkitPSP>/bin
-
-(Obviously replace <path to devkitPSP> with the full path to the devkitPSP installation directory)
 
 Getting started
 ---------------
 
-The best thing to do next is test the compiler, so grab an examples tarball from sourceforge & run make in the top level.
+The best thing to do next is test the compiler, so grab an examples tarball
+from sourceforge & run make in the top level.
 
 Credits
 -------
@@ -91,6 +119,7 @@ Credits
 * Thanks to WinterMute for bringing us devkitPro, the website is http://www.devkitpro.org
 * Build scripts written by WinterMute and tied together by GreenGianT
 * Thanks to Mr Spiv, Honkey Kong, Raleigh and JoostP for OS X testing
+* libctru by Smealum, YellowS8, fincs, mtheall & WinterMute with contributions from many others.
 * libogc written and supplied by Shagkur. Additional code by WinterMute, Bushing, Marcan & Tybor
 * libgba by WinterMute
 * libnds by Joat, Dovoto and WinterMute with contributions from many others.

build-devkit.sh

@@ -1,18 +1,17 @@
+
 #!/bin/bash
 #---------------------------------------------------------------------------------
-# Build scripts for
+#	devkitARM release 55
-#	devkitARM release 38
+#	devkitPPC release 38
-#	devkitPPC release 26
+#	devkitA64 release 17
-#	devkitPSP release 17
 #---------------------------------------------------------------------------------
 
-if [ 1 -eq 1 ] ; then
+if [ 0 -eq 1 ] ; then
-	echo "Currently in release cycle, proceed with caution, do not report problems, do not ask for support."
 	echo "Please use the latest release buildscripts unless advised otherwise by devkitPro staff."
-	echo "http://sourceforge.net/projects/devkitpro/files/buildscripts/"
+	echo "https://github.com/devkitPro/buildscripts/releases/latest"
 	echo
-	echo "The scripts in svn are quite often dependent on things which currently only exist on developer"
+	echo "The scripts in the git repository may be dependent on things which currently only exist"
-	echo "machines. This is not a bug, use stable releases."
+	echo "on developer machines. This is not a bug, use stable releases."
 	exit 1
 fi
 
@@ -20,53 +19,36 @@ echo "Please note, these scripts are provided as a courtesy, toolchains built wi
 echo "are for personal use only and may not be distributed by entities other than devkitPro."
 echo "See http://devkitpro.org/wiki/Trademarks"
 echo
-echo "Patches and improvements are of course welcome, please send these to the patch tracker"
+echo "Users should use devkitPro pacman to maintain toolchain installations where possible"
-echo "https://sourceforge.net/tracker/?group_id=114505&atid=668553"
+echo "See https://devkitpro.org/wiki/devkitPro_pacman"
+echo
+echo "Patches and improvements are of course welcome, please submit a PR"
+echo "https://github.com/devkitPro/buildscripts/pulls"
 echo
 
-LIBOGC_VER=1.8.10
+
-LIBGBA_VER=20090222
+
-LIBNDS_VER=1.5.5
+DKARM_RULES_VER=1.2.1
-DEFAULT_ARM7_VER=0.5.24
+DKARM_CRTLS_VER=1.1.1
-DSWIFI_VER=0.3.13
+
-LIBMIRKO_VER=0.9.7
+DKPPC_RULES_VER=1.1.0
-MAXMOD_VER=1.0.7
+
-FILESYSTEM_VER=0.9.9
+DKA64_RULES_VER=1.0.1
-LIBFAT_VER=1.0.11
+
-PSPSDK_VER=20120404
+OSXMIN=${OSXMIN:-10.9}
-GBATOOLS_VER=1.0.0
-GRIT_VER=0.8.10
-NDSTOOL_VER=1.50.1
-GENERAL_TOOLS_VER=1.0.0
-DLDITOOL_VER=1.24.0
-GXTEXCONV_VER=0.1.9
-GCDSPSUITE_VER=1.4.0
-ELF2DOL_VER=1.0.0
-WIILOAD_VER=0.5.1
-MMUTIL_VER=1.8.6
 
 #---------------------------------------------------------------------------------
 function extract_and_patch {
 #---------------------------------------------------------------------------------
-	if [ ! -f extracted-$1 ]; then
+	if [ ! -f extracted-$1-$2 ]; then
-		echo "extracting $1"
+		echo "extracting $1-$2"
-		if [ $3 == "bz2" ]; then
+		tar -xf "$SRCDIR/$1-$2.tar.$3" || { echo "Error extracting "$1; exit 1; }
-			extractflags="-xjf"
+		touch extracted-$1-$2
-			archivetype=".tar.bz2"
-		elif [ $3 == "gz" ]; then
-			extractflags="-xzf"
-			archivetype=".tar.gz"
-		else
-			echo "invalid archive type"
-			exit 1
-		fi
-		tar $extractflags $SRCDIR/$1-$2$archivetype || { echo "Error extracting "$1; exit 1; }
-		touch extracted-$1
 	fi
-	if [[ ! -f patched-$1 && -f $patchdir/$1-$2.patch ]]; then
+	if [[ ! -f patched-$1-$2 && -f $patchdir/$1-$2.patch ]]; then
-		echo "patching $1"
+		echo "patching $1-$2"
 		patch -p1 -d $1-$2 -i $patchdir/$1-$2.patch || { echo "Error patching $1"; exit 1; }
-		touch patched-$1
+		touch patched-$1-$2
 	fi
 }
 
@@ -109,7 +91,7 @@ else
 	echo "for mingw/msys you must use <drive>:/<install path> or you will have include path problems"
 	echo "this is the top level directory for devkitpro, i.e. e:/devkitPro"
 
-	read INSTALLDIR
+	read -e INSTALLDIR
 	echo
 fi
 
@@ -138,23 +120,27 @@ fi
 echo use $MAKE as make
 export MAKE
 
-#---------------------------------------------------------------------------------
+CROSS_PARAMS="--build=`./config.guess`"
-# Add installed devkit to the path, adjusting path on minsys
-#---------------------------------------------------------------------------------
-TOOLPATH=$(echo $INSTALLDIR | sed -e 's/^\([a-zA-Z]\):/\/\1/')
-export PATH=$PATH:$TOOLPATH/$package/bin
 
 if [ ! -z $CROSSBUILD ]; then
+	export PATH=/opt/devkitpro/$package/bin:$PATH
 	prefix=$INSTALLDIR/$CROSSBUILD/$package
-	CROSS_PARAMS="--build=`./config.guess` --host=$CROSSBUILD"
+	CROSS_PARAMS="$CROSS_PARAMS --host=$CROSSBUILD"
+	CROSS_GCC_PARAMS="--with-gmp=$CROSSPATH --with-mpfr=$CROSSPATH --with-mpc=$CROSSPATH --with-isl=$CROSSPATH --with-zstd=$CROSSPATH"
 else
 	prefix=$INSTALLDIR/$package
 fi
 
+#---------------------------------------------------------------------------------
+# Add installed devkit to the path, adjusting path on minsys
+#---------------------------------------------------------------------------------
+TOOLPATH=$(echo $INSTALLDIR | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+export PATH=$TOOLPATH/$package/bin:$PATH
+
 if [ "$BUILD_DKPRO_AUTOMATED" != "1" ] ; then
 
 	echo
-	echo 'Ready to install '$package' in '$INSTALLDIR
+	echo 'Ready to install '$package' in '$prefix
 	echo
 	echo 'press return to continue'
 
@@ -164,47 +150,55 @@ PLATFORM=`uname -s`
 
 case $PLATFORM in
 	Darwin )
-		cflags="-mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc"
+		cppflags="-mmacosx-version-min=${OSXMIN} -I/usr/local/include"
-		ldflags="-mmacosx-version-min=10.4 -arch i386 -arch ppc -Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk"
+		ldflags="-mmacosx-version-min=${OSXMIN} -L/usr/local/lib"
-		export CC=gcc-4.0
+		if [ "x${OSXSDKPATH}x" != "xx" ]; then
-		export CXX=g++-4.0
+			cppflags="$cppflags -isysroot ${OSXSDKPATH}"
+			ldflags="$ldflags -Wl,-syslibroot,${OSXSDKPATH}"
+		fi
+		TESTCC=`cc -v 2>&1 | grep clang`
+		if [ "x${TESTCC}x" != "xx" ]; then
+			cppflags="$cppflags -fbracket-depth=512"
+		fi
     ;;
 	MINGW32* )
-		cflags="-D__USE_MINGW_ACCESS"
+		cppflags="-D__USE_MINGW_ACCESS"
-# horrid hack to get -flto to work on windows
-		plugin_ld="--with-plugin-ld=ld"
     ;;
 esac
 
+if [ ! -z $CROSSBUILD ] && grep -q "mingw" <<<"$CROSSBUILD" ; then
+	cppflags="-D__USE_MINGW_ACCESS -D__USE_MINGW_ANSI_STDIO=1"
+fi
+
+
 BUILDSCRIPTDIR=$(pwd)
 BUILDDIR=$(pwd)/.$package
+
 if [ ! -z $CROSSBUILD ]; then
 	BUILDDIR=$BUILDDIR-$CROSSBUILD
 fi
-DEVKITPRO_URL="http://downloads.sourceforge.net/devkitpro"
 
 patchdir=$(pwd)/$basedir/patches
 scriptdir=$(pwd)/$basedir/scripts
 
-archives="binutils-${BINUTILS_VER}.tar.bz2 gcc-${GCC_VER}.tar.bz2 newlib-${NEWLIB_VER}.tar.gz gdb-${GDB_VER}.tar.bz2"
+archives="binutils-${BINUTILS_VER}.tar.xz gcc-${GCC_VER}.tar.xz newlib-${NEWLIB_VER}.tar.gz"
-
-if [ $VERSION -eq 1 ]; then
-	targetarchives="libnds-src-${LIBNDS_VER}.tar.bz2 libgba-src-${LIBGBA_VER}.tar.bz2
-		libmirko-src-${LIBMIRKO_VER}.tar.bz2 dswifi-src-${DSWIFI_VER}.tar.bz2 maxmod-src-${MAXMOD_VER}.tar.bz2
-		default-arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
-		libfat-src-${LIBFAT_VER}.tar.bz2"
-	hostarchives="gbatools-$GBATOOLS_VER.tar.bz2 grit-$GRIT_VER.tar.bz2 ndstool-$NDSTOOL_VER.tar.bz2
-		general-tools-$GENERAL_TOOLS_VER.tar.bz2 dlditool-$DLDITOOL_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2"
-fi
 
 if [ $VERSION -eq 2 ]; then
-	targetarchives="libogc-src-${LIBOGC_VER}.tar.bz2 libfat-src-${LIBFAT_VER}.tar.bz2"
+	archives="binutils-${MN_BINUTILS_VER}.tar.bz2 $archives"
-	hostarchives="gxtexconv-$GXTEXCONV_VER.tar.bz2 gcdspsuite-$GCDSPSUITE_VER.tar.bz2
-			wiiload-$WIILOAD_VER.tar.bz2 elf2dol-$ELF2DOL_VER.tar.bz2 general-tools-$GENERAL_TOOLS_VER.tar.bz2"
 fi
 
-if [ $VERSION -eq 3 ]; then
+if [ "$BUILD_DKPRO_SKIP_CRTLS" != "1" ]; then
-	targetarchives="pspsdk-src-${PSPSDK_VER}.tar.bz2"
+	if [ $VERSION -eq 1 ]; then
+		archives="devkitarm-rules-$DKARM_RULES_VER.tar.gz devkitarm-crtls-$DKARM_CRTLS_VER.tar.gz $archives"
+	fi
+
+	if [ $VERSION -eq 2 ]; then
+		archives="devkitppc-rules-$DKPPC_RULES_VER.tar.gz $archives"
+	fi
+
+	if [ $VERSION -eq 3 ]; then
+		archives="devkita64-rules-$DKA64_RULES_VER.tar.gz $archives"
+	fi
 fi
 
 if [ ! -z "$BUILD_DKPRO_SRCDIR" ] ; then
@@ -213,12 +207,12 @@ else
 	SRCDIR=`pwd`
 fi
 
-cd $SRCDIR
+cd "$SRCDIR"
-for archive in $archives $targetarchives $hostarchives
+for archive in $archives
 do
 	echo $archive
 	if [ ! -f $archive ]; then
-		$FETCH http://downloads.sf.net/devkitpro/$archive || { echo "Error: Failed to download $archive"; exit 1; }
+		$FETCH https://downloads.devkitpro.org/$archive || { echo "Error: Failed to download $archive"; exit 1; }
 	fi
 done
 
@@ -226,43 +220,24 @@ cd $BUILDSCRIPTDIR
 mkdir -p $BUILDDIR
 cd $BUILDDIR
 
-extract_and_patch binutils $BINUTILS_VER bz2
+extract_and_patch binutils $BINUTILS_VER xz
-extract_and_patch gcc $GCC_VER bz2
+extract_and_patch gcc $GCC_VER xz
-rm -fr gcc-$GCC_VER/zlib
 extract_and_patch newlib $NEWLIB_VER gz
-extract_and_patch gdb $GDB_VER bz2
 
-for archive in $targetarchives
+if [ $VERSION -eq 2 ]; then extract_and_patch binutils $MN_BINUTILS_VER bz2; fi
-do
-	destdir=$(echo $archive | sed -e 's/\(.*\)-src-\(.*\)\.tar\.bz2/\1-\2/' )
-	echo $destdir
-	if [ ! -d $destdir ]; then
-		mkdir -p $destdir
-		bzip2 -cd $SRCDIR/$archive | tar -xf - -C $destdir || { echo "Error extracting "$archive; exit 1; }
-	fi
-done
-
-for archive in $hostarchives
-do
-	tar -xjf $SRCDIR/$archive
-done
 
 #---------------------------------------------------------------------------------
 # Build and install devkit components
 #---------------------------------------------------------------------------------
 if [ -f $scriptdir/build-gcc.sh ]; then . $scriptdir/build-gcc.sh || { echo "Error building toolchain"; exit 1; }; cd $BUILDSCRIPTDIR; fi
-if [ -f $scriptdir/build-tools.sh ]; then . $scriptdir/build-tools.sh || { echo "Error building tools"; exit 1; }; cd $BUILDSCRIPTDIR; fi
-if [ -f $scriptdir/build-crtls.sh ]; then . $scriptdir/build-crtls.sh || { echo "Error building crtls"; exit 1; }; cd $BUILDSCRIPTDIR; fi
 
-if [ "$CROSSBUILD" = "i686-w64-mingw32" ]; then
+
-	if [ $VERSION -ne 3 ]; then
+if [ "$BUILD_DKPRO_SKIP_CRTLS" != "1" ] && [ -f $scriptdir/build-crtls.sh ]; then
-		cp -v 	/opt/i686-w64-mingw32/mingw/lib/FreeImage.dll $prefix/bin
+  . $scriptdir/build-crtls.sh || { echo "Error building crtls & rules"; exit 1; }; cd $BUILDSCRIPTDIR;
-	fi
-	cp -v	/opt/i686-w64-mingw32/mingw/lib/libstdc++-6.dll \
-		/opt/i686-w64-mingw32/mingw/lib/libgcc_s_sjlj-1.dll \
-		$prefix/bin
 fi
 
+cd $BUILDSCRIPTDIR
+
 echo "stripping installed binaries"
 . ./strip_bins.sh
 
@@ -288,5 +263,13 @@ fi
 
 
 echo
-echo "note: Add the following to your environment;  DEVKITPRO=$TOOLPATH $toolchain=$TOOLPATH/$package"
+echo "note: Add the following to your environment;"
+echo
+echo "  DEVKITPRO=$TOOLPATH"
+if [ "$toolchain" != "DEVKITA64" ]; then
+echo "  $toolchain=$TOOLPATH/$package"
+fi
+echo
+echo "add $TOOLPATH/tools/bin to your PATH"
+echo
 echo

config.sh.sample

@@ -9,19 +9,10 @@
 #   0: User selects manually
 #   1: devkitARM
 #   2: devkitPPC
-#   3: devkitPSP
+#   3: devkitA64
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_PACKAGE=0
 
-#---------------------------------------------------------------------------------
-# Download source packages
-#---------------------------------------------------------------------------------
-#   0: User selects manually
-#   1: already downloaded
-#   2: download packages
-#---------------------------------------------------------------------------------
-BUILD_DKPRO_DOWNLOAD=0
-
 #---------------------------------------------------------------------------------
 # Toolchain installation directory, comment if not specified
 #---------------------------------------------------------------------------------
@@ -31,12 +22,28 @@ BUILD_DKPRO_DOWNLOAD=0
 #---------------------------------------------------------------------------------
 # Path to previously downloaded source packages, comment if not specified
 #---------------------------------------------------------------------------------
-#BUILD_DKPRO_SRCDIR=/d/projects/archives
+#BUILD_DKPRO_SRCDIR=~/projects/archives
 
 #---------------------------------------------------------------------------------
+# MAKEFLAGS for building - use number of processors for jobs
+#---------------------------------------------------------------------------------
+#numcores=`getconf _NPROCESSORS_ONLN`
+#export MAKEFLAGS="$MAKEFLAGS -j${numcores}"
+
+#---------------------------------------------------------------------------------
+# Uncomment to skip building of crtls and rules files
+#---------------------------------------------------------------------------------
+#BUILD_DKPRO_SKIP_CRTLS=1
+
 # Automated script execution
 #---------------------------------------------------------------------------------
 #  0: Ask to delete build folders & patched sources
 #  1: Use defaults, don't pause for answers
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_AUTOMATED=0
+
+#---------------------------------------------------------------------------------
+# set OSX SDK path if needed
+#---------------------------------------------------------------------------------
+#export OSXSDKPATH=/Library/Developer/CommandLineTools/SDKs/MacOSX10.12.sdk
+

cross-build-i686-w64-mingw32.sh

@@ -1,3 +0,0 @@
-#!/bin/bash
-export CROSSBUILD=i686-w64-mingw32
-export PATH=/opt/i686-w64-mingw32/bin:$PATH

dka64/patches/binutils-2.32.patch

@@ -0,0 +1,604 @@
+diff --git a/bfd/elf-bfd.h b/bfd/elf-bfd.h
+index 5741c60264..fb5d9d069c 100644
+--- a/bfd/elf-bfd.h
++++ b/bfd/elf-bfd.h
+@@ -1789,6 +1789,14 @@ struct output_elf_obj_tdata
+     asection *sec;
+   } build_id;
+ 
++  /* Data for .nx-module-name. */
++  struct
++  {
++    bfd_boolean (*after_write_object_contents) (bfd *);
++    const char *name;
++    asection *sec;
++  } nx_module_name;
++
+   /* Records the result of `get_program_header_size'.  */
+   bfd_size_type program_header_size;
+ 
+diff --git a/bfd/elf.c b/bfd/elf.c
+index eb3e1828e9..bc6bb48804 100644
+--- a/bfd/elf.c
++++ b/bfd/elf.c
+@@ -6514,6 +6514,14 @@ _bfd_elf_write_object_contents (bfd *abfd)
+   if (!bed->s->write_shdrs_and_ehdr (abfd))
+     return FALSE;
+ 
++  /* Write out the NX module name. */
++  if (t->o->nx_module_name.after_write_object_contents != NULL)
++    {
++      failed = !(*t->o->nx_module_name.after_write_object_contents) (abfd);
++      if (failed)
++        return FALSE;
++    }
++
+   /* This is last since write_shdrs_and_ehdr can touch i_shdrp[0].  */
+   if (t->o->build_id.after_write_object_contents != NULL)
+     return (*t->o->build_id.after_write_object_contents) (abfd);
+diff --git a/bfd/elfnn-aarch64.c b/bfd/elfnn-aarch64.c
+index faa27611d4..888af6bcd8 100644
+--- a/bfd/elfnn-aarch64.c
++++ b/bfd/elfnn-aarch64.c
+@@ -2341,6 +2341,12 @@ enum elf_aarch64_stub_type
+   aarch64_stub_erratum_843419_veneer,
+ };
+ 
++/* Is an undefined weak symbol resolved to 0 ? */
++#define UNDEFINED_WEAK_RESOLVED_TO_ZERO(INFO, EH)               \
++  ((EH)->root.root.type == bfd_link_hash_undefweak              \
++   && bfd_link_executable (INFO)                                \
++   && !(INFO)->dynamic_undefined_weak)
++
+ struct elf_aarch64_stub_hash_entry
+ {
+   /* Base hash table entry structure.  */
+@@ -6436,11 +6442,13 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+       Elf_Internal_Sym *sym;
+       asection *sec;
+       struct elf_link_hash_entry *h;
++      struct elf_aarch64_link_hash_entry *eh;
+       bfd_vma relocation;
+       bfd_reloc_status_type r;
+       arelent bfd_reloc;
+       char sym_type;
+       bfd_boolean unresolved_reloc = FALSE;
++      bfd_boolean resolved_to_zero = FALSE;
+       char *error_message = NULL;
+ 
+       r_symndx = ELFNN_R_SYM (rel->r_info);
+@@ -6576,6 +6584,10 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+ 					       h, &unresolved_reloc,
+ 					       save_addend, &addend, sym);
+ 
++      eh = (struct elf_aarch64_link_hash_entry *) h;
++      resolved_to_zero = (eh != NULL
++                          && UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh));
++
+       switch (elfNN_aarch64_bfd_reloc_from_type (input_bfd, r_type))
+ 	{
+ 	case BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC:
+@@ -6599,7 +6611,7 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+ 	      need_relocs =
+ 		(!bfd_link_executable (info) || indx != 0) &&
+ 		(h == NULL
+-		 || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++		 || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 		 || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6694,7 +6706,7 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+ 	      need_relocs =
+ 		(!bfd_link_executable (info) || indx != 0) &&
+ 		(h == NULL
+-		 || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++		 || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 		 || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6743,7 +6755,7 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+ 	      bfd_vma off = symbol_tlsdesc_got_offset (input_bfd, h, r_symndx);
+ 
+ 	      need_relocs = (h == NULL
+-			     || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++			     || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 			     || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -7086,6 +7098,26 @@ need_copy_relocation_p (struct elf_aarch64_link_hash_entry *eh)
+   return FALSE;
+ }
+ 
++/* Remove undefined weak symbol from the dynamic symbol table if it
++   is resolved to 0.   */
++
++extern bfd_boolean
++elfNN_aarch64_elf_fixup_symbol (struct bfd_link_info *, struct elf_link_hash_entry *);
++
++bfd_boolean
++elfNN_aarch64_elf_fixup_symbol (struct bfd_link_info *info,
++                             struct elf_link_hash_entry *h)
++{
++  if (h->dynindx != -1
++      && UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, elf_aarch64_hash_entry (h)))
++    {
++      h->dynindx = -1;
++      _bfd_elf_strtab_delref (elf_hash_table (info)->dynstr,
++                              h->dynstr_index);
++    }
++  return TRUE;
++}
++
+ /* Adjust a symbol defined by a dynamic object and referenced by a
+    regular object.  The current definition is in some section of the
+    dynamic object, but we're not including those sections.  We have to
+@@ -8286,6 +8318,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+   struct elf_aarch64_link_hash_table *htab;
+   struct elf_aarch64_link_hash_entry *eh;
+   struct elf_dyn_relocs *p;
++  bfd_boolean resolved_to_zero;
+ 
+   /* An example of a bfd_link_hash_indirect symbol is versioned
+      symbol. For example: __gxx_personality_v0(bfd_link_hash_indirect)
+@@ -8305,6 +8338,10 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+   info = (struct bfd_link_info *) inf;
+   htab = elf_aarch64_hash_table (info);
+ 
++  eh = (struct elf_aarch64_link_hash_entry *) h;
++  eh->tlsdesc_got_jump_table_offset = (bfd_vma) - 1;
++  resolved_to_zero = UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh);
++
+   /* Since STT_GNU_IFUNC symbol must go through PLT, we handle it
+      here if it is defined and referenced in a non-shared object.  */
+   if (h->type == STT_GNU_IFUNC
+@@ -8314,7 +8351,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+     {
+       /* Make sure this symbol is output as a dynamic symbol.
+ 	 Undefined weak syms won't yet be marked as dynamic.  */
+-      if (h->dynindx == -1 && !h->forced_local
++      if (h->dynindx == -1 && !h->forced_local && !resolved_to_zero
+ 	  && h->root.type == bfd_link_hash_undefweak)
+ 	{
+ 	  if (!bfd_elf_link_record_dynamic_symbol (info, h))
+@@ -8348,6 +8385,11 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	     of relaxing into these from the large model PLT entries.  */
+ 	  s->size += PLT_SMALL_ENTRY_SIZE;
+ 
++          /* There should be no PLT relocations against resolved undefined
++             weak symbols in the executable.  */
++          if (!resolved_to_zero)
++            {
++
+ 	  /* We also need to make an entry in the .got.plt section, which
+ 	     will be placed in the .got section by the linker script.  */
+ 	  htab->root.sgotplt->size += GOT_ENTRY_SIZE;
+@@ -8370,6 +8412,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 
+ 	  htab->root.srelplt->reloc_count++;
+ 	}
++	}
+       else
+ 	{
+ 	  h->plt.offset = (bfd_vma) - 1;
+@@ -8382,9 +8425,6 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+       h->needs_plt = 0;
+     }
+ 
+-  eh = (struct elf_aarch64_link_hash_entry *) h;
+-  eh->tlsdesc_got_jump_table_offset = (bfd_vma) - 1;
+-
+   if (h->got.refcount > 0)
+     {
+       bfd_boolean dyn;
+@@ -8396,7 +8436,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 
+       /* Make sure this symbol is output as a dynamic symbol.
+ 	 Undefined weak syms won't yet be marked as dynamic.  */
+-      if (dyn && h->dynindx == -1 && !h->forced_local
++      if (dyn && h->dynindx == -1 && !h->forced_local && !resolved_to_zero
+ 	  && h->root.type == bfd_link_hash_undefweak)
+ 	{
+ 	  if (!bfd_elf_link_record_dynamic_symbol (info, h))
+@@ -8410,7 +8450,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	{
+ 	  h->got.offset = htab->root.sgot->size;
+ 	  htab->root.sgot->size += GOT_ENTRY_SIZE;
+-	  if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++	  if (((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 	       || h->root.type != bfd_link_hash_undefweak)
+ 	      && (bfd_link_pic (info)
+ 		  || WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, 0, h))
+@@ -8446,7 +8486,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	    }
+ 
+ 	  indx = h && h->dynindx != -1 ? h->dynindx : 0;
+-	  if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++	  if (((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 	       || h->root.type != bfd_link_hash_undefweak)
+ 	      && (!bfd_link_executable (info)
+ 		  || indx != 0
+@@ -8512,7 +8552,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	 visibility.  */
+       if (eh->dyn_relocs != NULL && h->root.type == bfd_link_hash_undefweak)
+ 	{
+-	  if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT
++	  if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT || resolved_to_zero
+ 	      || UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
+ 	    eh->dyn_relocs = NULL;
+ 
+@@ -8532,7 +8572,9 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	 symbols which turn out to need copy relocs or are not
+ 	 dynamic.  */
+ 
+-      if (!h->non_got_ref
++      if (!(h->non_got_ref
++           || (h->root.type == bfd_link_hash_undefweak
++               && !resolved_to_zero))
+ 	  && ((h->def_dynamic
+ 	       && !h->def_regular)
+ 	      || (htab->root.dynamic_sections_created
+@@ -8543,6 +8585,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	     Undefined weak syms won't yet be marked as dynamic.  */
+ 	  if (h->dynindx == -1
+ 	      && !h->forced_local
++	      && !resolved_to_zero
+ 	      && h->root.type == bfd_link_hash_undefweak
+ 	      && !bfd_elf_link_record_dynamic_symbol (info, h))
+ 	    return FALSE;
+@@ -9163,8 +9206,17 @@ elfNN_aarch64_finish_dynamic_symbol (bfd *output_bfd,
+ 				     Elf_Internal_Sym *sym)
+ {
+   struct elf_aarch64_link_hash_table *htab;
++  struct elf_aarch64_link_hash_entry *eh;
++  bfd_boolean local_undefweak;
+   htab = elf_aarch64_hash_table (info);
+ 
++  eh = (struct elf_aarch64_link_hash_entry *) h;
++
++  /* We keep PLT/GOT entries without dynamic PLT/GOT relocations for
++     resolved undefined weak symbols in executable so that their
++     references have value 0 at run-time.  */
++  local_undefweak = UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh);
++
+   if (h->plt.offset != (bfd_vma) - 1)
+     {
+       asection *plt, *gotplt, *relplt;
+@@ -9199,7 +9251,7 @@ elfNN_aarch64_finish_dynamic_symbol (bfd *output_bfd,
+ 	return FALSE;
+ 
+       elfNN_aarch64_create_small_pltn_entry (h, htab, output_bfd, info);
+-      if (!h->def_regular)
++      if (!local_undefweak && !h->def_regular)
+ 	{
+ 	  /* Mark the symbol as undefined, rather than as defined in
+ 	     the .plt section.  */
+@@ -9218,10 +9270,11 @@ elfNN_aarch64_finish_dynamic_symbol (bfd *output_bfd,
+     }
+ 
+   if (h->got.offset != (bfd_vma) - 1
+-      && elf_aarch64_hash_entry (h)->got_type == GOT_NORMAL
++      && elf_aarch64_hash_entry (h)->got_type == GOT_NORMAL 
+       /* Undefined weak symbol in static PIE resolves to 0 without
+ 	 any dynamic relocations.  */
+-      && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
++      && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h)
++      && !local_undefweak)
+     {
+       Elf_Internal_Rela rela;
+       bfd_byte *loc;
+@@ -9715,6 +9768,9 @@ const struct elf_size_info elfNN_aarch64_size_info =
+ #define elf_backend_init_index_section		\
+   _bfd_elf_init_2_index_sections
+ 
++#define elf_backend_fixup_symbol		\
++  elfNN_aarch64_elf_fixup_symbol
++
+ #define elf_backend_finish_dynamic_sections	\
+   elfNN_aarch64_finish_dynamic_sections
+ 
+diff --git a/ld/Makefile.am b/ld/Makefile.am
+index c2c798b4fe..a0073d27fe 100644
+--- a/ld/Makefile.am
++++ b/ld/Makefile.am
+@@ -1509,19 +1509,23 @@ ens32knbsd.c:	$(srcdir)/emulparams/ns32knbsd.sh \
+   $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf.c: $(srcdir)/emulparams/aarch64elf.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32.c: $(srcdir)/emulparams/aarch64elf32.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elfb.c: $(srcdir)/emulparams/aarch64elfb.sh $(srcdir)/emulparams/aarch64elf.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32b.c: $(srcdir)/emulparams/aarch64elf32b.sh $(srcdir)/emulparams/aarch64elf32.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64cloudabi.c: $(srcdir)/emulparams/aarch64cloudabi.sh \
+diff --git a/ld/Makefile.in b/ld/Makefile.in
+index fc687fc516..7d85865d92 100644
+--- a/ld/Makefile.in
++++ b/ld/Makefile.in
+@@ -3114,18 +3114,22 @@ ens32knbsd.c:	$(srcdir)/emulparams/ns32knbsd.sh \
+ 
+ eaarch64elf.c: $(srcdir)/emulparams/aarch64elf.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32.c: $(srcdir)/emulparams/aarch64elf32.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elfb.c: $(srcdir)/emulparams/aarch64elfb.sh $(srcdir)/emulparams/aarch64elf.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32b.c: $(srcdir)/emulparams/aarch64elf32b.sh $(srcdir)/emulparams/aarch64elf32.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64cloudabi.c: $(srcdir)/emulparams/aarch64cloudabi.sh \
+diff --git a/ld/emulparams/aarch64elf.sh b/ld/emulparams/aarch64elf.sh
+index 4a59342722..2aa1ec7712 100644
+--- a/ld/emulparams/aarch64elf.sh
++++ b/ld/emulparams/aarch64elf.sh
+@@ -1,3 +1,5 @@
++. ${srcdir}/emulparams/dynamic_undefined_weak.sh
++
+ ARCH=aarch64
+ MACHINE=
+ NOP=0x1f2003d5
+diff --git a/ld/emulparams/aarch64elf32.sh b/ld/emulparams/aarch64elf32.sh
+index 38bcd4bbb0..da0f411feb 100644
+--- a/ld/emulparams/aarch64elf32.sh
++++ b/ld/emulparams/aarch64elf32.sh
+@@ -1,3 +1,5 @@
++. ${srcdir}/emulparams/dynamic_undefined_weak.sh
++
+ ARCH="aarch64:ilp32"
+ MACHINE=
+ NOP=0x1f2003d5
+diff --git a/ld/emultempl/aarch64elf.em b/ld/emultempl/aarch64elf.em
+index 45e40b510c..916ef2086a 100644
+--- a/ld/emultempl/aarch64elf.em
++++ b/ld/emultempl/aarch64elf.em
+@@ -380,7 +380,7 @@ PARSE_AND_LIST_LONGOPTS='
+   { "no-apply-dynamic-relocs", no_argument, NULL, OPTION_NO_APPLY_DYNAMIC_RELOCS},
+ '
+ 
+-PARSE_AND_LIST_OPTIONS='
++PARSE_AND_LIST_OPTIONS=${PARSE_AND_LIST_OPTIONS}'
+   fprintf (file, _("  --no-enum-size-warning      Don'\''t warn about objects with incompatible\n"
+ 		   "                                enum sizes\n"));
+   fprintf (file, _("  --no-wchar-size-warning     Don'\''t warn about objects with incompatible\n"
+diff --git a/ld/emultempl/elf32.em b/ld/emultempl/elf32.em
+index f4f7ad6b4e..8428a54697 100644
+--- a/ld/emultempl/elf32.em
++++ b/ld/emultempl/elf32.em
+@@ -192,6 +192,9 @@ static char *depaudit; /* colon (typically) separated list of libs */
+ /* Style of .note.gnu.build-id section.  */
+ static const char *emit_note_gnu_build_id;
+ 
++/* NX module name. */
++static const char *emit_nx_module_name;
++
+ /* On Linux, it's possible to have different versions of the same
+    shared library linked against different versions of libc.  The
+    dynamic linker somehow tags which libc version to use in
+@@ -1217,6 +1220,92 @@ setup_build_id (bfd *ibfd)
+   return FALSE;
+ }
+ 
++static bfd_boolean
++write_nx_module_name (bfd *abfd)
++{
++  struct elf_obj_tdata *t = elf_tdata (abfd);
++  const char *name;
++  asection *asec;
++  Elf_Internal_Shdr *i_shdr;
++  unsigned char *contents;
++  bfd_size_type size;
++  file_ptr position;
++
++  name = t->o->nx_module_name.name;
++  asec = t->o->nx_module_name.sec;
++  if (bfd_is_abs_section (asec->output_section))
++    {
++      einfo (_("%P: warning: .nx-module-name section discarded,"
++	       " --build-id ignored\n"));
++      return TRUE;
++    }
++  i_shdr = &elf_section_data (asec->output_section)->this_hdr;
++
++  if (i_shdr->contents == NULL)
++    {
++      if (asec->contents == NULL)
++	asec->contents = (unsigned char *) xmalloc (asec->size);
++      contents = asec->contents;
++    }
++  else
++    contents = i_shdr->contents + asec->output_offset;
++
++  size = asec->size;
++  bfd_h_put_32 (abfd, 0, &contents[0]);
++  bfd_h_put_32 (abfd, size - 9, &contents[4]);
++  memcpy (&contents[8], name, size - 9);
++  contents[size - 1] = 0; /* ensure null termination for AMS */
++
++  position = i_shdr->sh_offset + asec->output_offset;
++
++  return (bfd_seek (abfd, position, SEEK_SET) == 0
++	  && bfd_bwrite (contents, size, abfd) == size);
++}
++
++/* Make .nx-module-name section, and set up elf_tdata->nx_module_name.  */
++
++static bfd_boolean
++setup_nx_module_name (bfd *ibfd, bfd *obfd)
++{
++  asection *s;
++  bfd_size_type size;
++  flagword flags;
++
++  if (emit_nx_module_name[0] == '\0')
++    {
++      /* Extract the basename of the output bfd and use it as the module name. */
++      char *dot_pos;
++      free ((char *) emit_nx_module_name);
++      emit_nx_module_name = (char *) lbasename (bfd_get_filename (obfd));
++      emit_nx_module_name = xstrdup (emit_nx_module_name);
++      dot_pos = strrchr (emit_nx_module_name, '.');
++      if (dot_pos != NULL)
++        {
++          /* Remove extension. */
++          *dot_pos = 0;
++        }
++    }
++
++  size = 8 + strlen(emit_nx_module_name) + 1; /* extra null terminator for AMS */
++  flags = (SEC_ALLOC | SEC_LOAD | SEC_IN_MEMORY
++	   | SEC_LINKER_CREATED | SEC_READONLY | SEC_DATA);
++  s = bfd_make_section_with_flags (ibfd, ".nx-module-name", flags);
++  if (s != NULL && bfd_set_section_alignment (ibfd, s, 4))
++    {
++      struct elf_obj_tdata *t = elf_tdata (link_info.output_bfd);
++      t->o->nx_module_name.after_write_object_contents = &write_nx_module_name;
++      t->o->nx_module_name.name = emit_nx_module_name;
++      t->o->nx_module_name.sec = s;
++      elf_section_type (s) = SHT_PROGBITS;
++      s->size = size;
++      return TRUE;
++    }
++
++  einfo (_("%P: warning: cannot create .nx-module-name section,"
++	   " --nx-module-name ignored\n"));
++  return FALSE;
++}
++
+ /* This is called after all the input files have been opened.  */
+ 
+ static void
+@@ -1267,6 +1356,24 @@ gld${EMULATION_NAME}_after_open (void)
+ 	}
+     }
+ 
++  if (emit_nx_module_name != NULL)
++    {
++      /* Find an ELF input.  */
++      for (abfd = link_info.input_bfds;
++        abfd != (bfd *) NULL; abfd = abfd->link.next)
++        if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
++            && bfd_count_sections (abfd) != 0
++            && !((lang_input_statement_type *) abfd->usrdata)->flags.just_syms)
++          break;
++
++      /* If there are no ELF input files do not try to create a .nx-module-name section. */
++      if (abfd == NULL || !setup_nx_module_name (abfd, link_info.output_bfd))
++        {
++          free ((char *) emit_nx_module_name);
++          emit_nx_module_name = NULL;
++        }
++    }
++
+   get_elf_backend_data (link_info.output_bfd)->setup_gnu_properties (&link_info);
+ 
+   if (bfd_link_relocatable (&link_info))
+@@ -2720,6 +2827,7 @@ enum elf_options
+   OPTION_EXCLUDE_LIBS,
+   OPTION_HASH_STYLE,
+   OPTION_BUILD_ID,
++  OPTION_NX_MODULE_NAME,
+   OPTION_AUDIT,
+   OPTION_COMPRESS_DEBUG
+ };
+@@ -2750,6 +2858,7 @@ EOF
+ fi
+ fragment <<EOF
+     {"build-id", optional_argument, NULL, OPTION_BUILD_ID},
++    {"nx-module-name", optional_argument, NULL, OPTION_NX_MODULE_NAME},
+     {"compress-debug-sections", required_argument, NULL, OPTION_COMPRESS_DEBUG},
+ EOF
+ if test x"$GENERATE_SHLIB_SCRIPT" = xyes; then
+@@ -2814,6 +2923,16 @@ gld${EMULATION_NAME}_handle_option (int optc)
+ 	einfo (_("%F%P: invalid --compress-debug-sections option: \`%s'\n"),
+ 	       optarg);
+       break;
++    case OPTION_NX_MODULE_NAME:
++      if (emit_nx_module_name != NULL)
++        {
++          free ((char *) emit_nx_module_name);
++          emit_nx_module_name = NULL;
++        }
++      if (optarg == NULL)
++        optarg = "";
++      emit_nx_module_name = xstrdup (optarg);
++      break;
+ EOF
+ 
+ if test x"$GENERATE_SHLIB_SCRIPT" = xyes; then
+diff --git a/ld/ldgram.y b/ld/ldgram.y
+index c3eadeb392..59ab143526 100644
+--- a/ld/ldgram.y
++++ b/ld/ldgram.y
+@@ -819,6 +819,7 @@ origin_spec:
+ 	ORIGIN '=' mustbe_exp
+ 		{
+ 		  region->origin_exp = $3;
++		  region->current = region->origin;
+ 		}
+ 	;
+ 
+diff --git a/ld/ldlang.c b/ld/ldlang.c
+index 33f6bda292..7161f4210a 100644
+--- a/ld/ldlang.c
++++ b/ld/ldlang.c
+@@ -7381,9 +7381,6 @@ lang_process (void)
+   current_target = default_target;
+   lang_statement_iteration++;
+   open_input_bfds (statement_list.head, OPEN_BFD_NORMAL);
+-  /* open_input_bfds also handles assignments, so we can give values
+-     to symbolic origin/length now.  */
+-  lang_do_memory_regions ();
+ 
+ #ifdef ENABLE_PLUGINS
+   if (link_info.lto_plugin_active)
+@@ -7526,6 +7523,8 @@ lang_process (void)
+   /* PR 13683: We must rerun the assignments prior to running garbage
+      collection in order to make sure that all symbol aliases are resolved.  */
+   lang_do_assignments (lang_mark_phase_enum);
++
++  lang_do_memory_regions();
+   expld.phase = lang_first_phase_enum;
+ 
+   /* Size up the common data.  */
+@@ -7610,11 +7609,8 @@ lang_process (void)
+   /* Fix any __start, __stop, .startof. or .sizeof. symbols.  */
+   lang_finalize_start_stop ();
+ 
+-  /* Do all the assignments again, to report errors.  Assignment
+-     statements are processed multiple times, updating symbols; In
+-     open_input_bfds, lang_do_assignments, and lang_size_sections.
+-     Since lang_relax_sections calls lang_do_assignments, symbols are
+-     also updated in ldemul_after_allocation.  */
++  /* Do all the assignments, now that we know the final resting places
++     of all the symbols.  */
+   lang_do_assignments (lang_final_phase_enum);
+ 
+   ldemul_finish ();

dka64/patches/gcc-11.1.0.patch

@@ -0,0 +1,456 @@
+diff --git a/gcc/config.gcc b/gcc/config.gcc
+index 357b0bed067..6b1e254785a 100644
+--- a/gcc/config.gcc
++++ b/gcc/config.gcc
+@@ -1090,7 +1090,14 @@ aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
+ 	tmake_file="${tmake_file} aarch64/t-aarch64"
+ 	case $target in
+ 	aarch64-*-elf*)
++		default_use_cxa_atexit=yes
+ 		use_gcc_stdint=wrap
++		tm_file="${tm_file} devkitpro.h"
++		tm_defines="${tm_defines}  TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
++		extra_options="${extra_options} devkitpro.opt"
++		case ${enable_threads} in
++			"" | yes | posix) thread_file='posix' ;;
++		esac
+ 		;;
+         aarch64-*-fuchsia*)
+                 tm_file="${tm_file} fuchsia.h"
+diff --git a/gcc/config.host b/gcc/config.host
+index 0a02c33cc80..38f7adc655e 100644
+--- a/gcc/config.host
++++ b/gcc/config.host
+@@ -251,6 +251,10 @@ case ${host} in
+     host_extra_gcc_objs="${host_extra_gcc_objs} driver-mingw32.o"
+     host_lto_plugin_soname=liblto_plugin.dll
+     ;;
++  aarch64-*-darwin*)
++    out_host_hook_obj="${out_host_hook_obj} host-aarch64-darwin.o"
++    host_xmake_file="${host_xmake_file} aarch64/x-darwin"
++    ;;
+   i[34567]86-*-darwin* | x86_64-*-darwin*)
+     out_host_hook_obj="${out_host_hook_obj} host-i386-darwin.o"
+     host_xmake_file="${host_xmake_file} i386/x-darwin"
+diff --git a/gcc/config/aarch64/aarch64-elf-raw.h b/gcc/config/aarch64/aarch64-elf-raw.h
+index e986149e400..9264d53f32c 100644
+--- a/gcc/config/aarch64/aarch64-elf-raw.h
++++ b/gcc/config/aarch64/aarch64-elf-raw.h
+@@ -22,6 +22,7 @@
+ #ifndef GCC_AARCH64_ELF_RAW_H
+ #define GCC_AARCH64_ELF_RAW_H
+ 
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
+ #define STARTFILE_SPEC " crti%O%s crtbegin%O%s crt0%O%s"
+ #define ENDFILE_SPEC \
+   " crtend%O%s crtn%O%s " \
+diff --git a/gcc/config/aarch64/aarch64-opts.h b/gcc/config/aarch64/aarch64-opts.h
+index af3b7364a74..6df7a0dc8a1 100644
+--- a/gcc/config/aarch64/aarch64-opts.h
++++ b/gcc/config/aarch64/aarch64-opts.h
+@@ -48,6 +48,12 @@ enum aarch64_tls_type {
+   TLS_DESCRIPTORS
+ };
+ 
++/* Which thread pointer access sequence to use.  */
++enum aarch64_tp_type {
++  TP_HARD,
++  TP_SOFT
++};
++
+ /* The code model defines the address generation strategy.
+    Most have a PIC and non-PIC variant.  */
+ enum aarch64_code_model {
+diff --git a/gcc/config/aarch64/aarch64.c b/gcc/config/aarch64/aarch64.c
+index 12625a4bee3..4353e2658a1 100644
+--- a/gcc/config/aarch64/aarch64.c
++++ b/gcc/config/aarch64/aarch64.c
+@@ -18053,8 +18053,24 @@ aarch64_load_tp (rtx target)
+       || !register_operand (target, Pmode))
+     target = gen_reg_rtx (Pmode);
+ 
+-  /* Can return in any reg.  */
+-  emit_insn (gen_aarch64_load_tp_hard (target));
++  if (TARGET_HARD_TP)
++    {
++      /* Can return in any reg.  */
++      emit_insn (gen_aarch64_load_tp_hard (target));
++    }
++  else
++    {
++      /* Always returned in r0.  Immediately copy the result into a pseudo,
++	 otherwise other uses of r0 (e.g. setting up function arguments) may
++	 clobber the value.  */
++
++      rtx tmp;
++
++      emit_insn (gen_aarch64_load_tp_soft ());
++
++      tmp = gen_rtx_REG (DImode, R0_REGNUM);
++      emit_move_insn (target, tmp);
++    }
+   return target;
+ }
+ 
+diff --git a/gcc/config/aarch64/aarch64.h b/gcc/config/aarch64/aarch64.h
+index bfffbcd6abf..814de8c2918 100644
+--- a/gcc/config/aarch64/aarch64.h
++++ b/gcc/config/aarch64/aarch64.h
+@@ -1191,6 +1191,10 @@ typedef struct
+ /* Check TLS Descriptors mechanism is selected.  */
+ #define TARGET_TLS_DESC (aarch64_tls_dialect == TLS_DESCRIPTORS)
+ 
++/* Check selected thread pointer access sequence to use.  */
++#define TARGET_HARD_TP (target_thread_pointer == TP_HARD)
++#define TARGET_SOFT_TP (target_thread_pointer == TP_SOFT)
++
+ extern enum aarch64_code_model aarch64_cmodel;
+ 
+ /* When using the tiny addressing model conditional and unconditional branches
+@@ -1236,7 +1240,7 @@ extern const char *aarch64_rewrite_mcpu (int argc, const char **argv);
+ #define MCPU_TO_MARCH_SPEC_FUNCTIONS \
+   { "rewrite_mcpu", aarch64_rewrite_mcpu },
+ 
+-#if defined(__aarch64__)
++#if 0 // defined(__aarch64__)
+ extern const char *host_detect_local_cpu (int argc, const char **argv);
+ #define HAVE_LOCAL_CPU_DETECT
+ # define EXTRA_SPEC_FUNCTIONS						\
+diff --git a/gcc/config/aarch64/aarch64.md b/gcc/config/aarch64/aarch64.md
+index abfd8452674..8b9f4423adb 100644
+--- a/gcc/config/aarch64/aarch64.md
++++ b/gcc/config/aarch64/aarch64.md
+@@ -6771,11 +6771,22 @@
+ (define_insn "aarch64_load_tp_hard"
+   [(set (match_operand:DI 0 "register_operand" "=r")
+ 	(unspec:DI [(const_int 0)] UNSPEC_TLS))]
+-  ""
+-  "mrs\\t%0, tpidr_el0"
++  "TARGET_HARD_TP"
++  "mrs\\t%0, tpidr_el0\\t// aarch64_load_tp_hard"
+   [(set_attr "type" "mrs")]
+ )
+ 
++(define_insn "aarch64_load_tp_soft"
++  [(set (reg:DI 0) (unspec:DI [(const_int 0)] UNSPEC_TLS))
++   (clobber (reg:DI IP0_REGNUM))
++   (clobber (reg:DI IP1_REGNUM))
++   (clobber (reg:DI LR_REGNUM))
++   (clobber (reg:CC CC_REGNUM))]
++  "TARGET_SOFT_TP"
++  "bl\\t__aarch64_read_tp\\t// aarch64_load_tp_soft"
++  [(set_attr "type" "branch")]
++)
++
+ ;; The TLS ABI specifically requires that the compiler does not schedule
+ ;; instructions in the TLS stubs, in order to enable linker relaxation.
+ ;; Therefore we treat the stubs as an atomic sequence.
+diff --git a/gcc/config/aarch64/aarch64.opt b/gcc/config/aarch64/aarch64.opt
+index 32191cf1acf..49b03937bdd 100644
+--- a/gcc/config/aarch64/aarch64.opt
++++ b/gcc/config/aarch64/aarch64.opt
+@@ -122,6 +122,21 @@ Enum(aarch64_tls_size) String(32) Value(32)
+ EnumValue
+ Enum(aarch64_tls_size) String(48) Value(48)
+ 
++mtp=
++Target RejectNegative Joined Enum(aarch64_tp_type) Var(target_thread_pointer) Init(TP_HARD)
++Specify how to access the thread pointer.
++
++Enum
++Name(aarch64_tp_type) Type(enum aarch64_tp_type)
++Valid arguments to -mtp=:
++
++EnumValue
++Enum(aarch64_tp_type) String(hard) Value(TP_HARD)
++
++EnumValue
++Enum(aarch64_tp_type) String(soft) Value(TP_SOFT)
++
++
+ march=
+ Target RejectNegative Negative(march=) ToLower Joined Var(aarch64_arch_string)
+ Use features of architecture ARCH.
+@@ -260,7 +275,7 @@ TargetVariable
+ long aarch64_stack_protector_guard_offset = 0
+ 
+ moutline-atomics
+-Target Var(aarch64_flag_outline_atomics) Init(2) Save
++Target Var(aarch64_flag_outline_atomics) Save
+ Generate local calls to out-of-line atomic operations.
+ 
+ -param=aarch64-sve-compare-costs=
+diff --git a/gcc/config/aarch64/host-aarch64-darwin.c b/gcc/config/aarch64/host-aarch64-darwin.c
+new file mode 100644
+index 00000000000..92c38b0b9db
+--- /dev/null
++++ b/gcc/config/aarch64/host-aarch64-darwin.c
+@@ -0,0 +1,32 @@
++/* i386-darwin host-specific hook definitions.
++   Copyright (C) 2003-2021 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++You should have received a copy of the GNU General Public License
++along with GCC; see the file COPYING3.  If not see
++<http://www.gnu.org/licenses/>.  */
++
++#define IN_TARGET_CODE 1
++
++#include "config.h"
++#include "system.h"
++#include "coretypes.h"
++#include "hosthooks.h"
++#include "hosthooks-def.h"
++#include "config/host-darwin.h"
++
++/* Darwin doesn't do anything special for aarch64 hosts; this file exists just
++   to include config/host-darwin.h.  */
++
++const struct host_hooks host_hooks = HOST_HOOKS_INITIALIZER;
+diff --git a/gcc/config/aarch64/t-aarch64 b/gcc/config/aarch64/t-aarch64
+index 7e1606c47ac..3b650075724 100644
+--- a/gcc/config/aarch64/t-aarch64
++++ b/gcc/config/aarch64/t-aarch64
+@@ -165,8 +165,10 @@ aarch64-cc-fusion.o: $(srcdir)/config/aarch64/aarch64-cc-fusion.cc \
+ 		$(srcdir)/config/aarch64/aarch64-cc-fusion.cc
+ 
+ comma=,
+-MULTILIB_OPTIONS    = $(subst $(comma),/, $(patsubst %, mabi=%, $(subst $(comma),$(comma)mabi=,$(TM_MULTILIB_CONFIG))))
+-MULTILIB_DIRNAMES   = $(subst $(comma), ,$(TM_MULTILIB_CONFIG))
++MULTILIB_OPTIONS    = mcmodel=large fPIC
++MULTILIB_DIRNAMES   = large pic
++MULTILIB_REQUIRED   = mcmodel=large fPIC
++MULTILIB_MATCHES    = fPIC=fpic fPIC=fpie fPIC=fPIE
+ 
+ insn-conditions.md: s-check-sve-md
+ s-check-sve-md: $(srcdir)/config/aarch64/check-sve-md.awk \
+diff --git a/gcc/config/aarch64/x-darwin b/gcc/config/aarch64/x-darwin
+new file mode 100644
+index 00000000000..6d788d5e89c
+--- /dev/null
++++ b/gcc/config/aarch64/x-darwin
+@@ -0,0 +1,3 @@
++host-aarch64-darwin.o : $(srcdir)/config/aarch64/host-aarch64-darwin.c
++	$(COMPILE) $<
++	$(POSTCOMPILE)
+diff --git a/gcc/config/devkitpro.h b/gcc/config/devkitpro.h
+new file mode 100644
+index 00000000000..11ba0f5ab1c
+--- /dev/null
++++ b/gcc/config/devkitpro.h
+@@ -0,0 +1,31 @@
++/* Definitions for devkitPro toolchains.
++   Copyright (C) 2016-2018 Free Software Foundation, Inc.
++
++   This file is part of GCC.
++
++   GCC is free software; you can redistribute it and/or modify it
++   under the terms of the GNU General Public License as published
++   by the Free Software Foundation; either version 3, or (at your
++   option) any later version.
++
++   GCC is distributed in the hope that it will be useful, but WITHOUT
++   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
++   License for more details.
++
++   Under Section 7 of GPL version 3, you are granted additional
++   permissions described in the GCC Runtime Library Exception, version
++   3.1, as published by the Free Software Foundation.
++
++   You should have received a copy of the GNU General Public License and
++   a copy of the GCC Runtime Library Exception along with this program;
++   see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++   <http://www.gnu.org/licenses/>.  */
++
++#undef TARGET_OS_CPP_BUILTINS
++#define TARGET_OS_CPP_BUILTINS()                \
++    do {                                        \
++        builtin_define ("__DEVKITA64__");       \
++    } while (0)
++
++
+diff --git a/gcc/config/devkitpro.opt b/gcc/config/devkitpro.opt
+new file mode 100644
+index 00000000000..9acbbf9d27c
+--- /dev/null
++++ b/gcc/config/devkitpro.opt
+@@ -0,0 +1,29 @@
++; Options for devkitPro toolchains.
++
++; Copyright (C) 2011-2018 Free Software Foundation, Inc.
++;
++; This file is part of GCC.
++;
++; GCC is free software; you can redistribute it and/or modify it under
++; the terms of the GNU General Public License as published by the Free
++; Software Foundation; either version 3, or (at your option) any later
++; version.
++;
++; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++; WARRANTY; without even the implied warranty of MERCHANTABILITY or
++; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++; for more details.
++;
++; You should have received a copy of the GNU General Public License
++; along with GCC; see the file COPYING3.  If not see
++; <http://www.gnu.org/licenses/>.
++
++; See the GCC internals manual (options.texi) for a description of
++; this file's format.
++
++; Please try to keep this file in ASCII collating order.
++
++pthread
++Driver
++
++; This comment is to ensure we retain the blank line above.
+diff --git a/gcc/config/i386/host-mingw32.c b/gcc/config/i386/host-mingw32.c
+index 360a280b23a..2c03947999a 100644
+--- a/gcc/config/i386/host-mingw32.c
++++ b/gcc/config/i386/host-mingw32.c
+@@ -45,7 +45,11 @@ static size_t mingw32_gt_pch_alloc_granularity (void);
+ static inline void w32_error(const char*, const char*, int, const char*);
+ 
+ /* FIXME: Is this big enough?  */
++#if __MINGW64__
++static const size_t pch_VA_max_size  = UINT64_C(64 * 1024 * 1024 * 1024);
++#else
+ static const size_t pch_VA_max_size  = 128 * 1024 * 1024;
++#endif
+ 
+ /* Granularity for reserving address space.  */
+ static size_t va_granularity = 0x10000;
+diff --git a/gcc/gcc.c b/gcc/gcc.c
+index 7837553958b..69d7a798e2e 100644
+--- a/gcc/gcc.c
++++ b/gcc/gcc.c
+@@ -853,6 +853,11 @@ proper position among the other output files.  */
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1197,6 +1202,7 @@ static const char *link_spec = LINK_SPEC;
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1702,6 +1708,7 @@ static struct spec_list static_specs[] =
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index 675930db043..bdfd6f6b0bb 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -325,7 +325,7 @@ register_tm_clones (void)
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance
+diff --git a/libgcc/gthr.h b/libgcc/gthr.h
+index cca3f294b7b..deffea4107b 100644
+--- a/libgcc/gthr.h
++++ b/libgcc/gthr.h
+@@ -136,7 +136,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ /* The pe-coff weak support isn't fully compatible to ELF's weak.
+    For static libraries it might would work, but as we need to deal
+    with shared versions too, we disable it for mingw-targets.  */
+-#ifdef __MINGW32__
++#if defined(__MINGW32__) || defined(__DEVKITA64__)
+ #undef GTHREAD_USE_WEAK
+ #define GTHREAD_USE_WEAK 0
+ #endif
+diff --git a/libstdc++-v3/include/Makefile.am b/libstdc++-v3/include/Makefile.am
+index 40a41ef2a1c..4d06c6f9953 100644
+--- a/libstdc++-v3/include/Makefile.am
++++ b/libstdc++-v3/include/Makefile.am
+@@ -1347,6 +1347,7 @@ ${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITA64_GLIBCXX___/__DEVKITA64__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 
+diff --git a/libstdc++-v3/include/Makefile.in b/libstdc++-v3/include/Makefile.in
+index fcd2b5b2d40..c034367994a 100644
+--- a/libstdc++-v3/include/Makefile.in
++++ b/libstdc++-v3/include/Makefile.in
+@@ -1830,6 +1830,7 @@ ${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITA64_GLIBCXX___/__DEVKITA64__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 
+diff --git a/libstdc++-v3/include/c_compatibility/fenv.h b/libstdc++-v3/include/c_compatibility/fenv.h
+index 0413e3b7c25..ff5f8bbe1a1 100644
+--- a/libstdc++-v3/include/c_compatibility/fenv.h
++++ b/libstdc++-v3/include/c_compatibility/fenv.h
+@@ -26,6 +26,10 @@
+  *  This is a Standard C++ Library header.
+  */
+ 
++#if !defined __cplusplus || defined _GLIBCXX_INCLUDE_NEXT_C_HEADERS
++# include_next <fenv.h>
++#else
++
+ #ifndef _GLIBCXX_FENV_H
+ #define _GLIBCXX_FENV_H 1
+ 
+@@ -79,3 +83,5 @@ namespace std
+ #endif // C++11
+ 
+ #endif // _GLIBCXX_FENV_H
++
++#endif // __cplusplus
+diff --git a/libstdc++-v3/include/c_global/cfenv b/libstdc++-v3/include/c_global/cfenv
+index 0b0ec35a837..d24cb1a3c81 100644
+--- a/libstdc++-v3/include/c_global/cfenv
++++ b/libstdc++-v3/include/c_global/cfenv
+@@ -37,9 +37,11 @@
+ 
+ #include <bits/c++config.h>
+ 
+-#if _GLIBCXX_HAVE_FENV_H
+-# include <fenv.h>
+-#endif
++// Need to ensure this finds the C library's <fenv.h> not a libstdc++
++// wrapper that might already be installed later in the include search path.
++#define _GLIBCXX_INCLUDE_NEXT_C_HEADERS
++#include_next <fenv.h>
++#undef _GLIBCXX_INCLUDE_NEXT_C_HEADERS
+ 
+ #ifdef _GLIBCXX_USE_C99_FENV_TR1
+ 

dka64/rules/base_rules

@@ -0,0 +1,40 @@
+include $(DEVKITPRO)/devkitA64/base_tools
+
+#---------------------------------------------------------------------------------
+%.a:
+#---------------------------------------------------------------------------------
+	@echo $(notdir $@)
+	@rm -f $@
+	$(AR) -rc $@ $^
+
+
+#---------------------------------------------------------------------------------
+%.o: %.cpp
+	@echo $(notdir $<)
+	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.c
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.s
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.S
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+# canned command sequence for binary data
+#---------------------------------------------------------------------------------
+define bin2o
+	bin2s $< | $(AS) -o $(@)
+	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' -e 's/[^A-Za-z0-9_]/_/g')`"_end[];" > `(echo $(<F) | tr . _)`.h
+	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' -e 's/[^A-Za-z0-9_]/_/g')`"[];" >> `(echo $(<F) | tr . _)`.h
+	echo "extern const u32" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' -e 's/[^A-Za-z0-9_]/_/g')`_size";" >> `(echo $(<F) | tr . _)`.h
+endef
+

dka64/rules/base_tools

@@ -0,0 +1,41 @@
+#---------------------------------------------------------------------------------
+# make sure we have bash on OSX
+#---------------------------------------------------------------------------------
+UNAME_S	:=	$(shell uname -s)
+UNAME_R	:=	$(shell uname -r)
+
+ifneq (,$(findstring Darwin,$(UNAME_S)))
+	export SHELL=/bin/bash
+endif
+
+#---------------------------------------------------------------------------------
+# path to tools
+#---------------------------------------------------------------------------------
+DEVKITPATH=$(shell echo "$(DEVKITPRO)" | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+export PATH	:=	$(DEVKITPATH)/tools/bin:$(DEVKITPATH)/devkitA64/bin:$(PATH)
+
+#---------------------------------------------------------------------------------
+# add portlibs path
+#---------------------------------------------------------------------------------
+export PORTLIBS_PATH	:=	$(DEVKITPATH)/portlibs
+
+
+#---------------------------------------------------------------------------------
+# the prefix on the compiler executables
+#---------------------------------------------------------------------------------
+PREFIX		:=	aarch64-none-elf-
+
+export CC	:=	$(PREFIX)gcc
+export CXX	:=	$(PREFIX)g++
+export AS	:=	$(PREFIX)as
+export AR	:=	$(PREFIX)gcc-ar
+export OBJCOPY	:=	$(PREFIX)objcopy
+export STRIP	:=	$(PREFIX)strip
+export NM	:=	$(PREFIX)gcc-nm
+export RANLIB	:=	$(PREFIX)gcc-ranlib
+
+ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
+
+ifneq (,$(ISVC))
+	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
+endif

dka64/scripts/build-crtls.sh

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+#---------------------------------------------------------------------------------
+# set env variables
+#---------------------------------------------------------------------------------
+export DEVKITPRO=$TOOLPATH
+
+#---------------------------------------------------------------------------------
+# Install the rules files
+#---------------------------------------------------------------------------------
+cd $BUILDDIR
+
+tar -xvf $SRCDIR/devkita64-rules-$DKA64_RULES_VER.tar.gz
+cd devkita64-rules-$DKA64_RULES_VER
+make install

dka64/scripts/build-gcc.sh

@@ -0,0 +1,153 @@
+#!/bin/sh
+#---------------------------------------------------------------------------------
+
+#---------------------------------------------------------------------------------
+# build and install binutils
+#---------------------------------------------------------------------------------
+
+mkdir -p $target/binutils
+cd $target/binutils
+
+if [ ! -f configured-binutils ]
+then
+	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+        --prefix=$prefix --target=$target --disable-nls --disable-werror \
+	--enable-lto --enable-plugins --enable-poison-system-directories \
+	$CROSS_PARAMS \
+        || { echo "Error configuring binutils"; exit 1; }
+	touch configured-binutils
+fi
+
+if [ ! -f built-binutils ]
+then
+  $MAKE || { echo "Error building binutils"; exit 1; }
+  touch built-binutils
+fi
+
+if [ ! -f installed-binutils ]
+then
+  $MAKE install || { echo "Error installing binutils"; exit 1; }
+  touch installed-binutils
+fi
+cd $BUILDDIR
+
+#---------------------------------------------------------------------------------
+# build and install just the c compiler
+#---------------------------------------------------------------------------------
+mkdir -p $target/gcc
+cd $target/gcc
+
+if [ ! -f configured-gcc ]
+then
+	CFLAGS="$cflags" \
+	CXXFLAGS="$cflags" \
+	LDFLAGS="$ldflags" \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	LDFLAGS_FOR_TARGET="" \
+	../../gcc-$GCC_VER/configure \
+		--enable-languages=c,c++,objc,lto \
+		--with-gnu-as --with-gnu-ld --with-gcc \
+		--with-march=armv8\
+		--enable-cxx-flags='-ffunction-sections' \
+		--disable-libstdcxx-verbose \
+		--enable-poison-system-directories \
+		--enable-interwork --enable-multilib \
+		--enable-threads --disable-win32-registry --disable-nls --disable-debug\
+		--disable-libmudflap --disable-libssp --disable-libgomp \
+		--disable-libstdcxx-pch \
+		--enable-libstdcxx-time \
+		--enable-libstdcxx-filesystem-ts \
+		--target=$target \
+		--with-newlib=yes \
+		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
+		--prefix=$prefix \
+		--enable-lto $plugin_ld\
+		--with-system-zlib \
+                --disable-tm-clone-registry \
+                --disable-__cxa_atexit \
+		--with-bugurl="https://github.com/devkitPro/buildscripts/issues" --with-pkgversion="devkitA64 release 17" \
+		$CROSS_PARAMS \
+		$CROSS_GCC_PARAMS \
+		$EXTRA_GCC_PARAMS \
+		|| { echo "Error configuring gcc"; exit 1; }
+	touch configured-gcc
+fi
+
+if [ ! -f built-gcc ]
+then
+	$MAKE all-gcc || { echo "Error building gcc stage1"; exit 1; }
+	touch built-gcc
+fi
+
+if [ ! -f installed-gcc ]
+then
+	$MAKE install-gcc || { echo "Error installing gcc"; exit 1; }
+	touch installed-gcc
+fi
+
+
+unset CFLAGS
+cd $BUILDDIR
+
+OLD_CC=$CC
+OLDCXX=$CXX
+unset CC
+unset CXX
+
+#---------------------------------------------------------------------------------
+# build and install newlib
+#---------------------------------------------------------------------------------
+mkdir -p $target/newlib
+cd $target/newlib
+
+if [ ! -f configured-newlib ]
+then
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	../../newlib-$NEWLIB_VER/configure \
+	--disable-newlib-supplied-syscalls \
+	--enable-newlib-mb \
+	--disable-newlib-wide-orient \
+	--target=$target \
+	--prefix=$prefix \
+	|| { echo "Error configuring newlib"; exit 1; }
+	touch configured-newlib
+fi
+
+if [ ! -f built-newlib ]
+then
+	$MAKE || { echo "Error building newlib"; exit 1; }
+	touch built-newlib
+fi
+
+
+if [ ! -f installed-newlib ]
+then
+	$MAKE install -j1 || { echo "Error installing newlib"; exit 1; }
+	touch installed-newlib
+fi
+
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
+#---------------------------------------------------------------------------------
+# build and install the final compiler
+#---------------------------------------------------------------------------------
+
+cd $BUILDDIR
+
+cd $target/gcc
+
+if [ ! -f built-stage2 ]
+then
+	$MAKE all || { echo "Error building gcc stage2"; exit 1; }
+	touch built-stage2
+fi
+
+if [ ! -f installed-stage2 ]
+then
+	$MAKE install || { echo "Error installing gcc stage2"; exit 1; }
+	touch installed-stage2
+fi
+
+rm -fr $prefix/$target/sys-include

dkarm-eabi/crtls/Makefile

@@ -1,5 +0,0 @@
-include $(DEVKITARM)/base_rules
-
-all:
-	$(CC)  -x assembler-with-cpp -marm -c $(CRT)_crt0.s -o$(CRT)_crt0.o
-	$(CC)  -x assembler-with-cpp -mthumb -c $(CRT)_crt0.s -o thumb/$(CRT)_crt0.o

dkarm-eabi/crtls/dldi.ld

@@ -1,190 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-	/*	This base address is chosen to be a reserved instruction in THUMB mode,
-		and SWILT in ARM mode, with an impossible SWI value. This should allow
-		the patcher / linker to find all shifted addresses within each section.
-		Changed sections are: glue_7, got
-	*/
-	ddmem	: ORIGIN = 0xBF800000, LENGTH = 32K		
-}
-
-
-SECTIONS
-{
-	.init	:
-	{
-		__text_start = . ;
-		KEEP (*(.init))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.text :   /* ALIGN (4): */
-	{
-		*(.text.*)
-		*(.stub)
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.gnu.linkonce.t*)
-		__glue_start = ABSOLUTE(.);
-		*(.glue_7)
-		*(.glue_7t)
-		__glue_end = ABSOLUTE(.);
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ddmem
-	__exidx_start = .;
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ddmem
-	__exidx_end = .;
-
-/* Ensure the __preinit_array_start label is properly aligned.  We
-   could instead move the label definition inside the section, but
-   the linker would then create the section even if it turns out to
-   be empty, which isn't pretty.  */
-	. = ALIGN(32 / 8);
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >ddmem = 0xff
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     : { KEEP (*(.init_array)) } >ddmem = 0xff
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     : { KEEP (*(.fini_array)) } >ddmem = 0xff
-	PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >ddmem = 0
-
-
-	__got_start = . ;
-	.got            : 
-	{ 
-		*(.got.plt) 
-		*(.got) 
-		*(.rel.got)
-	} >ddmem = 0
-	__got_end = . ;
-
-	
-	.data ALIGN(4) : 	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >ddmem = 0xff
-
-	__data_end = . ;
-
-	.bss ALIGN(4) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-	} >ddmem
-
-	__bss_end = . ;
-	__bss_end__ = . ;
-
-	_end = . ;
-	__end__ = . ;
-	PROVIDE (end = _end);
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm7.ld

@@ -1,176 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x037f8000, LENGTH = 96K	
-}
-
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram)+ LENGTH(iwram);
-
-__sp_irq	=	__iwram_top - 0x100;
-__sp_svc	=	__sp_irq - 0x100;
-__sp_usr	=	__sp_svc - 0x100;
-
-__irq_flags	=	0x04000000 - 8;
-__irq_flagsaux	=	0x04000000 - 0x40;
-__irq_vector	=	0x04000000 - 4;
-
-SECTIONS
-{
-	.init	:
-	{
-		__text_start = . ;
-		KEEP (*(.init))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		} >iwram = 0xff
-	.plt : { *(.plt) } >iwram = 0xff
-
-	.text :   /* ALIGN (4): */
-	{
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >iwram =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >iwram
-	__exidx_start = .;
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >iwram
-	__exidx_end = .;
-
-/* Ensure the __preinit_array_start label is properly aligned.  We
-   could instead move the label definition inside the section, but
-   the linker would then create the section even if it turns out to
-   be empty, which isn't pretty.  */
-	. = ALIGN(32 / 8);
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >iwram = 0xff
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     : { KEEP (*(.init_array)) } >iwram = 0xff
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     : { KEEP (*(.fini_array)) } >iwram = 0xff
-	PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >iwram = 0
-	.got            : { *(.got.plt) *(.got) } >iwram = 0
-
-	.data ALIGN(4) : 	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >iwram = 0xff
-
-	.bss ALIGN(4) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	} >iwram
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm7.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm7.ld%s
-
-*startfile:
-ds_arm7_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_arm7_crt0.s

@@ -1,97 +0,0 @@
-@---------------------------------------------------------------------------------
-	.section ".init"
-	.global _start
-@---------------------------------------------------------------------------------
-	.align	4
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	mov	r0, #0x04000000		@ IME = 0;
-	mov	r1, #0
-	str	r1, [r0, #0x208]
-
-	mov	r0, #0x12		@ Switch to IRQ Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_irq		@ Set IRQ stack
-
-	mov	r0, #0x13		@ Switch to SVC Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_svc		@ Set SVC stack
-
-	mov	r0, #0x1F		@ Switch to System Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_usr		@ Set user stack
-
-	ldr	r0, =__bss_start__	@ Clear BSS section to 0x00
-	ldr	r1, =__bss_end__
-	sub	r1, r1, r0
-	bl	ClearMem
-
-	ldr	r3, =__libc_init_array	@ global constructors
-	bl	_blx_r3_stub
-
-	mov	r0, #0			@ int argc
-	mov	r1, #0			@ char *argv[]
-	ldr	r3, =main
-	ldr	lr,=__libnds_exit
-	bx	r3
-
-
-@---------------------------------------------------------------------------------
-_blx_r3_stub:
-@---------------------------------------------------------------------------------
-	bx	r3
-
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-@---------------------------------------------------------------------------------
-	mov	r2, #3			@ Round down to nearest word boundary
-	add	r1, r1, r2		@ Shouldn't be needed
-	bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
-	bxeq	lr			@ Quit if copy size is 0
-
-	mov	r2, #0
-ClrLoop:
-	stmia	r0!, {r2}
-	subs	r1, r1, #4
-	bne	ClrLoop
-	bx	lr
-
-@---------------------------------------------------------------------------------
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@---------------------------------------------------------------------------------
-CopyMemCheck:
-@---------------------------------------------------------------------------------
-	sub	r3, r4, r2		@ Is there any data to copy?
-@---------------------------------------------------------------------------------
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@---------------------------------------------------------------------------------
-CopyMem:
-@---------------------------------------------------------------------------------
-	mov	r0, #3			@ These commands are used in cases where
-	add	r3, r3, r0		@ the length is not a multiple of 4,
-	bics	r3, r3, r0		@ even though it should be.
-	bxeq	lr			@ Length is zero, so exit
-CIDLoop:
-	ldmia	r1!, {r0}
-	stmia	r2!, {r0}
-	subs	r3, r3, #4
-	bne	CIDLoop
-	bx	lr
-
-@---------------------------------------------------------------------------------
-	.align
-	.pool
-	.end
-@---------------------------------------------------------------------------------

dkarm-eabi/crtls/ds_arm7_vram.ld

@@ -1,180 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x037f8000, LENGTH = 96K	
-	vram	: ORIGIN = 0x06000000, LENGTH = 128K
-}
-
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram)+ LENGTH(iwram);
-
-__sp_irq	=	__iwram_top - 0x100;
-__sp_svc	=	__sp_irq - 0x100;
-__sp_usr	=	__sp_svc - 0x100;
-
-__irq_flags	=	0x04000000 - 8;
-__irq_flagsaux	=	0x04000000 - 0x40;
-__irq_vector	=	0x04000000 - 4;
-
-SECTIONS
-{
-	.init	:
-	{
-		__text_start = . ;
-		KEEP (*(.init))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		} >vram = 0xff
-	.plt : { *(.plt) } >vram = 0xff
-
-	.text :   /* ALIGN (4): */
-	{
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >vram =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >vram
-	__exidx_start = .;
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >vram
-	__exidx_end = .;
-
-/* Ensure the __preinit_array_start label is properly aligned.  We
-   could instead move the label definition inside the section, but
-   the linker would then create the section even if it turns out to
-   be empty, which isn't pretty.  */
-	. = ALIGN(32 / 8);
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >vram = 0xff
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     : { KEEP (*(.init_array)) } >vram = 0xff
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     : { KEEP (*(.fini_array)) } >vram = 0xff
-	PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >vram = 0
-	.got            : { *(.got.plt) *(.got) } >vram = 0
-
-
-	.data ALIGN(4) : 	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >vram = 0xff
-
-
-
-	.bss ALIGN(4) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	} >vram
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm7_vram.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm7_vram.ld%s
-
-*startfile:
-ds_arm7_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_arm9.ld

@@ -1,242 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-__vectors_start	=	ORIGIN(vectors);
-__itcm_start	=	ORIGIN(itcm);
-__ewram_end	=	ORIGIN(ewram) + LENGTH(ewram);
-__eheap_end	=	ORIGIN(ewram) + LENGTH(ewram);
-__dtcm_start	=	ORIGIN(dtcm);
-__dtcm_top	=	ORIGIN(dtcm) + LENGTH(dtcm);
-__irq_flags	=	__dtcm_top - 0x08;
-__irq_vector	=	__dtcm_top - 0x04;
-
-__sp_svc	=	__dtcm_top - 0x100;
-__sp_irq	=	__sp_svc - 0x100;
-__sp_usr	=	__sp_irq - 0x100;
-
-SECTIONS
-{
-	.init	:
-	{
-		__text_start = . ;
-		KEEP (*(.init))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	.plt : { *(.plt) } >ewram = 0xff
-
-	.text :   /* ALIGN (4): */
-	{
-		*(EXCLUDE_FILE (*.itcm*) .text)
-
-		*(.text.*)
-		*(.stub)
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.gnu.linkonce.t*)
-		*(.glue_7)
-		*(.glue_7t)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >ewram =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ewram
- 	__exidx_start = .;
-	ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ewram
- 	__exidx_end = .;
-
-	/*	Ensure the __preinit_array_start label is properly aligned.  We
-		could instead move the label definition inside the section, but
-		the linker would then create the section even if it turns out to
-		be empty, which isn't pretty.  */
-
-	. = ALIGN(32 / 8);
-
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >ewram = 0xff
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     :
-	{
-		KEEP (*(SORT(.init_array.*)))
-		KEEP (*(.init_array))
-	} >ewram = 0xff
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     :
-	{
-		KEEP (*(.fini_array))
-		KEEP (*(SORT(.fini_array.*)))
-	} >ewram = 0xff
-
-	PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/*	gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >ewram = 0
-	.got            : { *(.got.plt) *(.got) *(.rel.got) } >ewram = 0
-
-	.ewram ALIGN(4) : 
-	{
-		__ewram_start = ABSOLUTE(.) ;
-		*(.ewram)
-		*ewram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-
-	.data ALIGN(4) :
-	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >ewram = 0xff
-
-
-	__dtcm_lma = . ;
-	__bss_vma = . ;
-
-	.dtcm __dtcm_start : AT (__dtcm_lma)
-	{
-		*(.dtcm)
-		*(.dtcm.*)
-		. = ALIGN(4);
-		__dtcm_end = ABSOLUTE(.);
-	} >dtcm  = 0xff
-
-
-	__itcm_lma = __dtcm_lma + SIZEOF(.dtcm);
-
-	.itcm __itcm_start : AT (__itcm_lma)
-	{
-		*(.itcm)
-		*itcm.*(.text)
-		. = ALIGN(4);
-		__itcm_end = ABSOLUTE(.);
-	} >itcm = 0xff
-	
-	__vectors_lma = __itcm_lma + SIZEOF(.itcm);
-
-	.vectors __vectors_start : AT (__vectors_lma)
-	{
-		*(.vectors)
-		*vectors.*(.text)
-		. = ALIGN(4);
-		__vectors_end = ABSOLUTE(.);
-	} >vectors = 0xff
-	
-	.sbss __dtcm_end (NOLOAD): 
-	{
-		__sbss_start = ABSOLUTE(.);
-		__sbss_start__ = ABSOLUTE(.);
-		*(.sbss)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__sbss_end = ABSOLUTE(.);
-	} >dtcm 
-
-	.bss __bss_vma (NOLOAD): 
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.) ;
-		__end__ = ABSOLUTE(.) ;
-	} AT>ewram 
-
-
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm9.mem

@@ -1,8 +0,0 @@
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	ewram	: ORIGIN = 0x02000000, LENGTH = 4M - 4k
-	dtcm	: ORIGIN = 0x0b000000, LENGTH = 16K
-	vectors	: ORIGIN = 0x01000000, LENGTH = 256
-	itcm	: ORIGIN = 0x01000100, LENGTH = 32K - 256
-}

dkarm-eabi/crtls/ds_arm9.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm9.mem%s -T ds_arm9.ld%s
-
-*startfile:
-ds_arm9_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_arm9_crt0.s

@@ -1,208 +0,0 @@
-@---------------------------------------------------------------------------------
-@ DS processor selection
-@---------------------------------------------------------------------------------
-	.arch	armv5te
-	.cpu	arm946e-s
-@---------------------------------------------------------------------------------
-
-	.equ	_libnds_argv,0x02FFFE70
-
-@---------------------------------------------------------------------------------
-	.section ".init"
-	.global _start
-@---------------------------------------------------------------------------------
-	.align	4
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	mov	r0, #0x04000000			@ IME = 0;
-	str	r0, [r0, #0x208]
-	
-	@ set sensible stacks to allow bios call
-
-	mov	r0, #0x13		@ Switch to SVC Mode
-	msr	cpsr, r0
-	mov	r1,#0x03000000
-	sub	r1,r1,#0x1000
-	mov	sp,r1
-	mov	r0, #0x1F		@ Switch to System Mode
-	msr	cpsr, r0
-	sub	r1,r1,#0x100
-	mov	sp,r1
-
-	ldr	r3, =__libnds_mpu_setup
-	blx	r3
-
-	mov	r0, #0x12		@ Switch to IRQ Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_irq		@ Set IRQ stack
-
-	mov	r0, #0x13		@ Switch to SVC Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_svc		@ Set SVC stack
-
-	mov	r0, #0x1F		@ Switch to System Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_usr		@ Set user stack
-
-	ldr	r1, =__itcm_lma		@ Copy instruction tightly coupled memory (itcm section) from LMA to VMA
-	ldr	r2, =__itcm_start
-	ldr	r4, =__itcm_end
-	bl	CopyMemCheck
-
-	ldr	r1, =__vectors_lma		@ Copy reserved vectors area (itcm section) from LMA to VMA
-	ldr	r2, =__vectors_start
-	ldr	r4, =__vectors_end
-	bl	CopyMemCheck
-
-	ldr	r1, =__dtcm_lma		@ Copy data tightly coupled memory (dtcm section) from LMA to VMA
-	ldr	r2, =__dtcm_start
-	ldr	r4, =__dtcm_end
-	bl	CopyMemCheck
-
-	bl	checkARGV		@ check and process argv trickery
-
-	ldr	r0, =__bss_start__	@ Clear BSS section
-	ldr	r1, =__bss_end__
-	sub	r1, r1, r0
-	bl	ClearMem
-
-	ldr	r0, =__sbss_start	@ Clear SBSS section 
-	ldr	r1, =__sbss_end
-	sub	r1, r1, r0
-	bl	ClearMem
-	
-
-	ldr	r0, =_libnds_argv
-
-	@ reset heap base
-	ldr	r2, [r0,#20]		@ newheap base
-	ldr	r1,=fake_heap_start
-	str	r2,[r1]
-
-	ldr	r1, =fake_heap_end	@ set heap end
-	sub	r8, r8,#0xc000
-	str	r8, [r1]
-
-	push	{r0}
-	ldr	r3, =initSystem
-	blx	r3			@ system initialisation
-
-	ldr	r3, =__libc_init_array	@ global constructors
-	blx	r3
-
-	pop	{r0}
-
-	ldr	r1, [r0,#16]		@ argv
-	ldr	r0, [r0,#12]		@ argc
-
-	ldr	r3, =main
-	ldr	lr, =__libnds_exit
-	bx	r3			@ jump to user code
-
-@---------------------------------------------------------------------------------
-@ check for a commandline 
-@---------------------------------------------------------------------------------
-checkARGV:
-@---------------------------------------------------------------------------------
-	ldr	r0, =_libnds_argv	@ argv structure
-	mov	r1, #0
-	str	r1, [r0,#12]		@ clear argc
-	str	r1, [r0,#16]		@ clear argv
-	
-	ldr	r3, [r0]		@ argv magic number
-	ldr	r2, =0x5f617267		@ '_arg'
-	cmp	r3, r2
-	strne	r1, [r0,#20]
-	bxne	lr			@ bail out if no magic
-	
-	ldr	r1, [r0, #4]		@ command line address
-	ldr	r2, [r0, #8]		@ length of command line
-
-	@ copy to heap
-	ldr	r3, =__end__		@ initial heap base
-	str	r3, [r0, #4]		@ set command line address
-
-	cmp	r2, #0
-	subnes	r4, r3, r1		@ dst-src
-	bxeq	lr			@ dst == src || len==0 : nothing to do.
-	
-	cmphi	r2, r4			@ len > (dst-src)
-	bhi	.copybackward
-
-.copyforward:		
-	ldrb	r4, [r1], #1
-	strb	r4, [r3], #1
-	subs	r2, r2, #1
-	bne	.copyforward
-	b	.copydone
-
-.copybackward:
-	subs	r2, r2, #1
-	ldrb	r4, [r1, r2]
-	strb	r4, [r3, r2]
-	bne	.copybackward
-
-.copydone:
-	push	{lr}
-	ldr	r3, =build_argv
-	blx	r3
-	pop	{lr}
-	bx	lr	
-
-
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-@---------------------------------------------------------------------------------
-	mov	r2, #3			@ Round down to nearest word boundary
-	add	r1, r1, r2		@ Shouldn't be needed
-	bics	r1, r1, r2	@ Clear 2 LSB (and set Z)
-	bxeq	lr			@ Quit if copy size is 0
-
-	mov	r2, #0
-ClrLoop:
-	stmia	r0!, {r2}
-	subs	r1, r1, #4
-	bne	ClrLoop
-
-	bx	lr
-
-@---------------------------------------------------------------------------------
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@---------------------------------------------------------------------------------
-CopyMemCheck:
-@---------------------------------------------------------------------------------
-	sub	r3, r4, r2		@ Is there any data to copy?
-@---------------------------------------------------------------------------------
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@---------------------------------------------------------------------------------
-CopyMem:
-@---------------------------------------------------------------------------------
-	mov	r0, #3			@ These commands are used in cases where
-	add	r3, r3, r0		@ the length is not a multiple of 4,
-	bics	r3, r3, r0	@ even though it should be.
-	bxeq	lr			@ Length is zero, so exit
-CIDLoop:
-	ldmia	r1!, {r0}
-	stmia	r2!, {r0}
-	subs	r3, r3, #4
-	bne	CIDLoop
-
-	bx	lr
-
-@---------------------------------------------------------------------------------
-	.align
-	.pool
-	.end
-@---------------------------------------------------------------------------------

dkarm-eabi/crtls/ds_cart.ld

@@ -1,213 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x03800000, LENGTH = 64K	
-	ewram	: ORIGIN = 0x02000000, LENGTH = 4M
-}
-
-__ewram_start	=	ORIGIN(ewram);
-__eheap_end	=	ORIGIN(ewram)+ LENGTH(ewram);
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram)+ LENGTH(iwram);
-__sp_irq	=	__iwram_top - 0x60;
-__sp_svc	=	__sp_irq - 0x100;
-__sp_usr	=	__sp_svc - 0x100;
-
-__irq_flags	=	__iwram_top - 8;
-__irq_vector	=	__iwram_top - 4;
-
-SECTIONS
-{
-	.init	:
-	{
-		__text_start = . ;
-		KEEP (*(.init))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		} >rom = 0xff
-	.plt : { *(.plt) } >rom = 0xff
-
-	.text :   /* ALIGN (4): */
-	{
-		*(EXCLUDE_FILE (*.iwram*) .text)
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >rom =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) } >rom = 0xff
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) } >rom = 0xff
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) } >rom = 0xff
-  PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >rom = 0
-	.got            : { *(.got.plt) *(.got) } >rom = 0
-
-	__ewram_lma = . ;
-
-	.ewram __ewram_start : AT (__ewram_lma) 
-	{
-		__ewram_start = ABSOLUTE(.) ;
-		*(.ewram)
-		*ewram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	.sbss ALIGN(4):
- 	{
-		__sbss_start = ABSOLUTE(.);
- 		*(.sbss)
- 		. = ALIGN(4);
- 	} >ewram
-	__sbss_end = . ;
-
-	_end = . ;
-	__end__ = . ;
-	PROVIDE (end = _end);
-
-	__iwram_lma = __ewram_lma + SIZEOF(.ewram) + SIZEOF(.sbss);
-	
-	.iwram __iwram_start : AT (__iwram_lma)
-	{
-		__iwram_start = ABSOLUTE(.) ;
-		*(.iwram)
-		*iwram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	__iwram_end = . ;
-	__data_lma = __iwram_lma + SIZEOF(.iwram) ;
-
-
-	.data ALIGN(4) : AT (__data_lma)
-	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-	} >iwram = 0xff
-
-	__data_end = . ;
-	__appended_data = __data_lma + SIZEOF(.data) ;
-
-
-	.bss ALIGN(4) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	} >iwram
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_cart.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_cart.ld%s
-
-*startfile:
-ds_cart_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_cart_crt0.s

@@ -1,160 +0,0 @@
-@---------------------------------------------------------------------------------
-	.section ".init"
-	.global _start
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b	rom_header_end
-
-@---------------------------------------------------------------------------------
-	.fill   156,1,0				@ Nintendo Logo Character Data (8000004h)
-	.fill	16,1,0				@ Game Title
-	.byte   0x30,0x31			@ Maker Code (80000B0h)
-	.byte   0x96				@ Fixed Value (80000B2h)
-	.byte   0x00				@ Main Unit Code (80000B3h)
-	.byte   0x00				@ Device Type (80000B4h)
-	.fill	7,1,0				@ unused
-	.byte	0x00				@ Software Version No (80000BCh)
-	.byte	0xf0				@ Complement Check (80000BDh)
-	.byte	0x00,0x00    			@ Checksum (80000BEh)
-
-rom_header_end:
-	b	start_vector			@ This branch must be here for proper
-						@ positioning of the following header.
-
-	.GLOBAL	__boot_method, __slave_number
-__boot_method:
-	.byte   0				@ boot method (0=ROM boot, 3=Multiplay boot)
-__slave_number:
-	.byte   0				@ slave # (1=slave#1, 2=slave#2, 3=slave#3)
-
-	.byte   0 				@ reserved
-	.byte   0 				@ reserved
-	.word   0    				@ reserved
-	.word   0				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-@---------------------------------------------------------------------------------
-	.align	4
-	.arm
-@---------------------------------------------------------------------------------
-start_vector:
-@---------------------------------------------------------------------------------
-	mov	r0, #0x04000000		@ IME = 0;
-	str	r0, [r0, #0x208]
-
-	mov	r0, #0x12		@ Switch to IRQ Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_irq		@ Set IRQ stack
-
-	mov	r0, #0x13		@ Switch to SVC Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_svc		@ Set SVC stack
-
-
-	mov	r0, #0x1F		@ Switch to System Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_usr		@ Set user stack
-
-	mov	r1, #0x42
-	strb	r1, [r7], #1
-	mov	r1, #0x35
-	strb	r1, [r7], #1
-	mov	r1, #0x2B
-	strb	r1, [r7], #1
-	mov	r1, #0x2B
-	strb	r1, [r7], #1
-
-	ldr	r1, =__data_lma		@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
-	ldr	r2, =__data_start
-	ldr	r4, =__data_end
-	bl	CopyMemChk
-
-	ldr	r1, =__iwram_lma	@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
-	ldr	r2, =__iwram_start
-	ldr	r4, =__iwram_end
-	bl	CopyMemChk
-
-	ldr	r0, =__bss_start	@ Clear BSS section to 0x00
-	ldr	r1, =__bss_end
-	sub	r1, r1, r0
-	bl	ClearMem
-
-	ldr	r0, =__sbss_start	@ Clear SBSS section to 0x00
-	ldr	r1, =__sbss_end
-	sub	r1, r1, r0
-	bl	ClearMem
-
-	ldr	r1, =fake_heap_end	@ set heap end
-	ldr	r0, =__eheap_end
-	str	r0, [r1]
-	
-	ldr	r3, =__libc_init_array	@ global constructors
-	bl	_call_via_r3
-
-	mov	r0, #0			@ int argc
-	mov	r1, #0			@ char *argv[]
-	ldr	r3, =main
-	bl	_call_via_r3		@ jump to user code
-
-
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-	mov	r2, #3			@ Round down to nearest word boundary
-	add	r1, r1, r2		@ Shouldn't be needed
-	bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
-	bxeq	lr			@ Quit if copy size is 0
-
-	mov	r2, #0
-@---------------------------------------------------------------------------------
-ClrLoop:
-@---------------------------------------------------------------------------------
-	stmia	r0!, {r2}
-	subs	r1, r1, #4
-	bne	ClrLoop
-	bx	lr
-
-@---------------------------------------------------------------------------------
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@---------------------------------------------------------------------------------
-CopyMemChk:
-@---------------------------------------------------------------------------------
-	sub	r3, r4, r2		@ Is there any data to copy?
-@---------------------------------------------------------------------------------
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@---------------------------------------------------------------------------------
-CopyMem:
-@---------------------------------------------------------------------------------
-	mov	r0, #3			@ These commands are used in cases where
-	add	r3, r3, r0		@ the length is not a multiple of 4,
-	bics	r3, r3, r0		@ even though it should be.
-	bxeq	lr			@ Length is zero so exit
-
-@---------------------------------------------------------------------------------
-CIDLoop:
-@---------------------------------------------------------------------------------
-	ldmia	r1!, {r0}
-	stmia	r2!, {r0}
-	subs	r3, r3, #4
-	bne	CIDLoop
-	bx	lr
-@---------------------------------------------------------------------------------
-	.align
-	.pool
-@---------------------------------------------------------------------------------
-	.end
-@---------------------------------------------------------------------------------
-

dkarm-eabi/crtls/dsi_arm9.mem

@@ -1,8 +0,0 @@
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	ewram	: ORIGIN = 0x02000000, LENGTH = 16M - 4k
-	dtcm	: ORIGIN = 0x0b000000, LENGTH = 16K
-	vectors	: ORIGIN = 0x01000000, LENGTH = 256
-	itcm	: ORIGIN = 0x01000100, LENGTH = 32K - 256
-}

dkarm-eabi/crtls/dsi_arm9.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T dsi_arm9.mem%s -T ds_arm9.ld%s
-
-*startfile:
-ds_arm9_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/er_crt0.s

@@ -1,56 +0,0 @@
-@---------------------------------------------------------------------------------
-@ nintendo e-reader startup code
-@---------------------------------------------------------------------------------
-@ author  : tim schuerewegen
-@ version : 1.0
-@---------------------------------------------------------------------------------
-	.section	".init"
-	.global     _start
-	.align
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b	start_vector
-	.long 0
-	.long 0x02000000
-
-start_vector:
-	@ enter thumb mode
-	adr		r0, _start_thumb + 1
-	bx		r0
-
-	.thumb
-
-_start_thumb:
-
-	@ save return address (rom)
-	mov		r3, lr
-
-	@ clear bss section
-	ldr		r0, =__bss_start
-	ldr		r1, =__bss_end
-	mov		r2, #0
-_loop_bss_clear:
-	strb	r2, [r0]
-	add		r0, #1
-	cmp		r0, r1
-	blt		_loop_bss_clear
-
-	@ set return address (rom)
-	mov		lr, r3
-
-	@ jump to main
-	ldr		r3, =main
-	bx		r3
-
-	.align
-
-	.pool
-
-	.end
-
-	.align
-	.pool
-	.end
-

dkarm-eabi/crtls/gba.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T gba_cart.ld%s
-
-*startfile:
-gba_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/gba_cart.ld

@@ -1,312 +0,0 @@
-/* Linker Script Original v1.3 by Jeff Frohwein     */
-/*  v1.0 - Original release                         */
-/*  v1.1 - Added proper .data section support       */
-/*  v1.2 - Added support for c++ & iwram overlays   */
-/*       - Major contributions by Jason Wilkins.    */
-/*  v1.3 - .ewram section now can be used when      */
-/*         compiling for MULTIBOOT mode. This fixes */
-/*         malloc() in DevKitAdvance which depends  */
-/*         on __eheap_start instead of end to define*/
-/*         the starting location of heap space.     */
-/*         External global variable __gba_iwram_heap*/
-/*         support added to allow labels end, _end, */
-/*         & __end__ to point to end of iwram or    */
-/*         the end of ewram.                        */
-/*	Additions by WinterMute				*/
-/* v1.4 -	.sbss section added for unitialised	*/
-/*		    data in ewram 			*/
-/* v1.5 -	padding section added to stop EZF 	*/
-/*		    stripping important data		*/
-
-/* This file is released into the public domain		*/
-/* for commercial or non-commercial use with no		*/
-/* restrictions placed upon it.				*/
-
-/* NOTE!!!: This linker script defines the RAM &  */
-/*   ROM start addresses. In order for it to work */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-/* SEARCH_DIR(/bin/arm); */
-
-/* The linker script function "var1 += var2;" sometimes    */
-/* reports incorrect values in the *.map file but the      */
-/* actual value it calculates is usually, if not always,   */
-/* correct. If you leave out the ". = ALIGN(4);" at the    */
-/* end of each section then the return value of SIZEOF()   */
-/* is sometimes incorrect and "var1 += var2;" appears to   */
-/* not work as well. "var1 += var2" style functions are    */
-/* avoided below as a result.                              */
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x03000000, LENGTH = 32K
-	ewram	: ORIGIN = 0x02000000, LENGTH = 256K
-}
-
-__text_start	=	ORIGIN(rom);
-__eheap_end	=	ORIGIN(ewram) + LENGTH(ewram);
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram) + LENGTH(iwram);;
-__sp_irq	=	__iwram_top - 0x060;
-__sp_usr	=	__sp_irq - 0x0a0;
-__irq_flags	=	0x03007ff8;
-
-SECTIONS
-{
-	. = __text_start;
-	.init :
-	{
-		KEEP (*(.init))
-		. = ALIGN(4);
-	} >rom =0xff
-
-	.plt :
-	{
-		*(.plt)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom
-
-	.text  :   /* ALIGN (4): */
-	{
-		*(EXCLUDE_FILE (*.iwram*) .text)
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	__text_end = .;
-	.fini           :
-	{
-		KEEP (*(.fini))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >rom =0
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >rom
-	__exidx_start = .;
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >rom
-	__exidx_end = .;
-
-	.ctors :
-	{
-		/*	gcc uses crtbegin.o to find the start of the constructors, so
-			we make sure it is first.  Because this is a wildcard, it
-			doesn't matter if the user does not actually link against
-			crtbegin.o; the linker won't look for a file to match a
-			wildcard.  The wildcard also means that it doesn't matter which
-			directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0
-
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0
-
-	__iwram_lma = .;
-
-	.iwram __iwram_start : AT (__iwram_lma)
-	{
-		__iwram_start__ = ABSOLUTE(.) ;
-		*(.iwram)
-		*iwram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-		__iwram_end__ = ABSOLUTE(.) ;
-	} >iwram = 0xff
-
-	__data_lma = __iwram_lma + SIZEOF(.iwram) ;
-
-	.bss ALIGN(4) (NOLOAD) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-
-	} AT>iwram
-
-	.data ALIGN(4) : AT (__data_lma)
-	{
-		__data_start__ = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-	} >iwram = 0xff
-
-	__preinit_lma = __data_lma + SIZEOF(.data);
-
-	.preinit_array ALIGN(4)    : AT (__preinit_lma)
-	{
-		__preinit_array_start = ABSOLUTE(.);
-		KEEP (*(.preinit_array))
-		__preinit_array_end = ABSOLUTE(.);
-	} >iwram
-
-	__init_lma = __preinit_lma + SIZEOF(.preinit_array);
-
-	.init_array  ALIGN(4)   : AT (__init_lma)
-	{
-		__init_array_start = ABSOLUTE(.);
-		KEEP (*(SORT(.init_array.*)))
-		KEEP (*(.init_array))
-		__init_array_end = ABSOLUTE(.);
-	} >iwram
-
-	__fini_lma = __init_lma + SIZEOF(.init_array);
-
-	.fini_array  ALIGN(4)   : AT (__fini_lma)
-	{
-		__fini_array_start = ABSOLUTE(.);
-		KEEP (*(SORT(.fini_array.*)))
-		KEEP (*(.fini_array))
-  		__fini_array_end = ABSOLUTE(.);
-	} >iwram
-
-	__jcr_lma = __fini_lma + SIZEOF(.fini_array);
-	.jcr        ALIGN(4)    : AT (__jcr_lma) { KEEP (*(.jcr)) } >iwram
-
-	__data_end__  =  ABSOLUTE(.);
-	__iwram_overlay_lma = __jcr_lma + SIZEOF(.jcr);
-
-	__iwram_overlay_start = . ;
-
-	OVERLAY ALIGN(4) : NOCROSSREFS AT (__iwram_overlay_lma)
-	{
-		.iwram0 { *(.iwram0) . = ALIGN(4);}
-		.iwram1 { *(.iwram1) . = ALIGN(4);}
-		.iwram2 { *(.iwram2) . = ALIGN(4);}
-		.iwram3 { *(.iwram3) . = ALIGN(4);}
-		.iwram4 { *(.iwram4) . = ALIGN(4);}
-		.iwram5 { *(.iwram5) . = ALIGN(4);}
-		.iwram6 { *(.iwram6) . = ALIGN(4);}
-		.iwram7 { *(.iwram7) . = ALIGN(4);}
-		.iwram8 { *(.iwram8) . = ALIGN(4);}
-		.iwram9 { *(.iwram9) . = ALIGN(4);}
-	}>iwram = 0xff
-
-	__iwram_overlay_end = . ;
-	__ewram_lma = __iwram_overlay_lma + (__iwram_overlay_end - __iwram_overlay_start) ;
-
-	__iheap_start = . ;
-
-	__ewram_start = ORIGIN(ewram);
-	.ewram __ewram_start : AT (__ewram_lma)
-	{
-		*(.ewram)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		__ewram_end = ABSOLUTE(.);
-	}>ewram = 0xff
-
-	__pad_lma = __ewram_lma + SIZEOF(.ewram);
-
-	.sbss ALIGN(4)(NOLOAD):
- 	{
-		__sbss_start__ = ABSOLUTE(.);
- 		*(.sbss)
- 		. = ALIGN(4);
-		__sbss_end__  = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-		__eheap_start = ABSOLUTE(.);
- 	} AT>ewram
-
-	/* EZF Advance strips trailing 0xff bytes, add a pad section so nothing important is removed */
-	.pad ALIGN(4) : AT (__pad_lma)
-	{
-		LONG(0x52416b64)
-		LONG(0x4d)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} = 0xff
-	__rom_end__ = __pad_lma + SIZEOF(.pad);
-
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
-  .ARM.attributes 0 : { KEEP (*(.ARM.attributes)) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}

dkarm-eabi/crtls/gba_crt0.s

@@ -1,246 +0,0 @@
-	.section	".init"
-	.global     _start
-	.align
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b	rom_header_end
-
-	.fill   156,1,0			@ Nintendo Logo Character Data (8000004h)
-	.fill	16,1,0			@ Game Title
-	.byte   0x30,0x31		@ Maker Code (80000B0h)
-	.byte   0x96			@ Fixed Value (80000B2h)
-	.byte   0x00			@ Main Unit Code (80000B3h)
-	.byte   0x00			@ Device Type (80000B4h)
-	.fill	7,1,0			@ unused
-	.byte	0x00			@ Software Version No (80000BCh)
-	.byte	0xf0			@ Complement Check (80000BDh)
-	.byte	0x00,0x00    		@ Checksum (80000BEh)
-
-@---------------------------------------------------------------------------------
-rom_header_end:
-@---------------------------------------------------------------------------------
-	b	start_vector			@ This branch must be here for proper
-						@ positioning of the following header.
-
-	.GLOBAL	__boot_method, __slave_number
-@---------------------------------------------------------------------------------
-__boot_method:
-@---------------------------------------------------------------------------------
-	.byte   0				@ boot method (0=ROM boot, 3=Multiplay boot)
-@---------------------------------------------------------------------------------
-__slave_number:
-@---------------------------------------------------------------------------------
-	.byte   0				@ slave # (1=slave#1, 2=slave#2, 3=slave#3)
-
-	.byte   0 				@ reserved
-	.byte   0 				@ reserved
-	.word   0    				@ reserved
-	.word   0				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-
-    .global     start_vector
-    .align
-@---------------------------------------------------------------------------------
-start_vector:
-@---------------------------------------------------------------------------------
-	mov	r0, #0x4000000			@ REG_BASE
-	str	r0, [r0, #0x208]
-
-	mov	r0, #0x12			@ Switch to IRQ Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_irq			@ Set IRQ stack
-	mov	r0, #0x1f			@ Switch to System Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_usr			@ Set user stack
-
-@---------------------------------------------------------------------------------
-@ Enter Thumb mode
-@---------------------------------------------------------------------------------
-	add	r0, pc, #1
-	bx	r0
-
-	.thumb
-
-	ldr	r0, =__text_start
-	lsl	r0, #5				@ Was code compiled at 0x08000000 or higher?
-	bcs     DoEWRAMClear			@ yes, you can not run it in external WRAM
-
-	mov     r0, pc
-	lsl     r0, #5				@ Are we running from ROM (0x8000000 or higher) ?
-	bcc     SkipEWRAMClear			@ No, so no need to do a copy.
-
-@---------------------------------------------------------------------------------
-@ We were started in ROM, silly emulators. :P
-@ So we need to copy to ExWRAM.
-@---------------------------------------------------------------------------------
-	mov	r2, #2
-	lsl	r2, r2, #24			@ r2= 0x02000000
-	ldr	r3, =__end__			@ last ewram address
-	sub	r3, r2				@ r3= actual binary size
-	mov	r6, r2				@ r6= 0x02000000
-	lsl	r1, r2, #2			@ r1= 0x08000000
-
-	bl	CopyMem
-
-	bx	r6				@ Jump to the code to execute
-
-@---------------------------------------------------------------------------------
-DoEWRAMClear:					@ Clear External WRAM to 0x00
-@---------------------------------------------------------------------------------
-	mov	r1, #0x40
-	lsl	r1, #12				@ r1 = 0x40000
-	lsl	r0, r1, #7			@ r0 = 0x2000000
-	bl	ClearMem
-
-@---------------------------------------------------------------------------------
-SkipEWRAMClear:					@ Clear Internal WRAM to 0x00
-@---------------------------------------------------------------------------------
-
-@---------------------------------------------------------------------------------
-@ Clear BSS section to 0x00
-@---------------------------------------------------------------------------------
-	ldr	r0, =__bss_start__
-	ldr	r1, =__bss_end__
-	sub	r1, r0
-	bl	ClearMem
-
-@---------------------------------------------------------------------------------
-@ Clear SBSS section to 0x00
-@---------------------------------------------------------------------------------
-	ldr	r0, =__sbss_start__
-	ldr	r1, =__sbss_end__
-	sub	r1, r0
-	bl	ClearMem
-
-@---------------------------------------------------------------------------------
-@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
-@---------------------------------------------------------------------------------
-	ldr	r1, =__data_lma
-	ldr	r2, =__data_start__
-	ldr	r4, =__data_end__
-	bl	CopyMemChk
-
-@---------------------------------------------------------------------------------
-@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
-@---------------------------------------------------------------------------------
-	ldr	r1,= __iwram_lma
-	ldr	r2,= __iwram_start__
-	ldr	r4,= __iwram_end__
-	bl	CopyMemChk
-
-@---------------------------------------------------------------------------------
-@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
-@---------------------------------------------------------------------------------
-	ldr	r2,= __load_stop_iwram0
-	ldr	r1,= __load_start_iwram0
-	sub	r3, r2, r1			@ Is there any data to copy?
-	beq	CIW0Skip			@ no
-
-	ldr	r2,= __iwram_overlay_start
-	bl	CopyMem
-@---------------------------------------------------------------------------------
-CIW0Skip:
-@---------------------------------------------------------------------------------
-@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
-@---------------------------------------------------------------------------------
-	ldr	r1, =__ewram_lma
-	ldr	r2, =__ewram_start
-	ldr	r4, =__ewram_end
-	bl	CopyMemChk
-
-@---------------------------------------------------------------------------------
-CEW0Skip:
-@---------------------------------------------------------------------------------
-@ set heap end
-@---------------------------------------------------------------------------------
-	ldr	r1, =fake_heap_end
-	ldr	r0, =__eheap_end
-	str	r0, [r1]
-@---------------------------------------------------------------------------------
-@ global constructors
-@---------------------------------------------------------------------------------
-	ldr	r3, =__libc_init_array
-	bl	_blx_r3_stub
-@---------------------------------------------------------------------------------
-@ Jump to user code
-@---------------------------------------------------------------------------------
-	mov	r0, #0				@ int argc
-	mov	r1, #0				@ char	*argv[]
-	ldr	r3, =main
-	bl	_blx_r3_stub
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@---------------------------------------------------------------------------------
-@ r0 = Start Address
-@ r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-@---------------------------------------------------------------------------------
-	mov	r2,#3				@ These	commands are used in cases where
-	add	r1,r2				@ the length is	not a multiple of 4,
-	bic	r1,r2				@ even though it should be.
-
-	beq	ClearMX				@ Length is zero so exit
-
-	mov	r2,#0
-@---------------------------------------------------------------------------------
-ClrLoop:
-@---------------------------------------------------------------------------------
-	stmia	r0!, {r2}
-	sub	r1,#4
-	bne	ClrLoop
-@---------------------------------------------------------------------------------
-ClearMX:
-@---------------------------------------------------------------------------------
-	bx	lr
-
-@---------------------------------------------------------------------------------
-_blx_r3_stub:
-@---------------------------------------------------------------------------------
-	bx	r3
-
-@---------------------------------------------------------------------------------
-@ Copy memory if length	!= 0
-@---------------------------------------------------------------------------------
-@ r1 = Source Address
-@ r2 = Dest Address
-@ r4 = Dest Address + Length
-@---------------------------------------------------------------------------------
-CopyMemChk:
-@---------------------------------------------------------------------------------
-	sub	r3, r4, r2			@ Is there any data to copy?
-@---------------------------------------------------------------------------------
-@ Copy memory
-@---------------------------------------------------------------------------------
-@ r1 = Source Address
-@ r2 = Dest Address
-@ r3 = Length
-@---------------------------------------------------------------------------------
-CopyMem:
-@---------------------------------------------------------------------------------
-	mov	r0, #3				@ These commands are used in cases where
-	add	r3, r0				@ the length is not a multiple	of 4,
-	bic	r3, r0				@ even	though it should be.
-	beq	CIDExit				@ Length is zero so exit
-
-@---------------------------------------------------------------------------------
-CIDLoop:
-@---------------------------------------------------------------------------------
-	ldmia	r1!, {r0}
-	stmia	r2!, {r0}
-	sub	r3, #4
-	bne	CIDLoop
-@---------------------------------------------------------------------------------
-CIDExit:
-@---------------------------------------------------------------------------------
-	bx	lr
-
-	.align
-	.pool
-	.end
-

dkarm-eabi/crtls/gba_er.ld

@@ -1,49 +0,0 @@
-/***********************************/
-/* NINTENDO E-READER LINKER SCRIPT */
-/***********************************/
-/* Author  : Tim Schuerewegen      */
-/* Version : 1.0                   */
-/***********************************/
-
-OUTPUT_FORMAT( "elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH( arm)
-ENTRY( _start)
-
-SECTIONS
-{
-	.  = 0x02000000;
-
-	.init :
-	{
-		*(.init)
-		. = ALIGN(4);
-	} = 0xff
-
-	.text :
-	{
-		*(.text)
-		. = ALIGN(4);
-	} = 0xff
-
-	.rodata :
-	{
-		*(.rodata)
-		. = ALIGN(4);
-	} = 0xff
-
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	} = 0xff
-
-	.bss :
-	{
-		__bss_start = .;
-		*(.bss)
-		. = ALIGN(4);
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	}
-}
-

dkarm-eabi/crtls/gba_er.specs

@@ -1,8 +0,0 @@
-%rename link		old_link
-%rename endfile		old_endfile
-
-*link:
--T gba_er.ld%s %(old_link)
-
-*startfile:
-er_crt0%O%s

dkarm-eabi/crtls/gba_mb.ld

@@ -1,296 +0,0 @@
-/* Linker Script Original v1.3 by Jeff Frohwein     */
-/*  v1.0 - Original release                         */
-/*  v1.1 - Added proper .data section support       */
-/*  v1.2 - Added support for c++ & iwram overlays   */
-/*       - Major contributions by Jason Wilkins.    */
-/*  v1.3 - .ewram section now can be used when      */
-/*         compiling for MULTIBOOT mode. This fixes */
-/*         malloc() in DevKitAdvance which depends  */
-/*         on __eheap_start instead of end to define*/
-/*         the starting location of heap space.     */
-/*         External global variable __gba_iwram_heap*/
-/*         support added to allow labels end, _end, */
-/*         & __end__ to point to end of iwram or    */
-/*         the end of ewram.                        */
-/*	Additions by WinterMute	               	*/
-/* v1.4 -	.sbss section added for unitialised		*/
-/*		    data in ewram 							*/
-/* v1.5 -	padding section added to stop EZF 		*/
-/*		    stripping important data				*/
-/* v1.6 -	added memory sections			 		*/
-
-/* This file is released into the public domain		*/
-/* for commercial or non-commercial use with no		*/
-/* restrictions placed upon it.						*/
-
-/* NOTE!!!: This linker script defines the RAM &  */
-/*   ROM start addresses. In order for it to work */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x03000000, LENGTH = 32K
-	ewram	: ORIGIN = 0x02000000, LENGTH = 256K
-}
-
-
-
-__text_start	=	ORIGIN(ewram);
-__eheap_end	=	ORIGIN(ewram) + LENGTH(ewram);
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram) + LENGTH(iwram);;
-
-__sp_irq	=	__iwram_top - 0x060;
-__sp_usr	=	__sp_irq - 0x0a0;
-__irq_flags	=	0x03007ff8;
-
-SECTIONS
-{
-	. = __text_start;
-	.init :
-	{
-		KEEP (*(.init))
-		. = ALIGN(4);
-	} >ewram =0xff
-
-	.plt :
- 	{
-		*(.plt)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram
-
-	.text  ALIGN (4):
-	{
-		*(EXCLUDE_FILE (*.iwram*) .text)
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	__text_end = .;
-	.fini           :
-	{
-		KEEP (*(.fini))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram =0
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ewram
-   __exidx_start = .;
-  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ewram
-   __exidx_end = .;
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) } >ewram = 0xff
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) } >ewram = 0xff
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) } >ewram = 0xff
-  PROVIDE (__fini_array_end = .);
-	.ctors :
-	{
-		/*	gcc uses crtbegin.o to find the start of the constructors, so
-			we make sure it is first.  Because this is a wildcard, it
-			doesn't matter if the user does not actually link against
-			crtbegin.o; the linker won't look for a file to match a
-			wildcard.  The wildcard also means that it doesn't matter which
-			directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0
-
-	.jcr            : { KEEP (*(.jcr)) } >ewram
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-	. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0
-
-	__iwram_lma = .;
-
-	.iwram __iwram_start : AT (__iwram_lma)
-	{
-		__iwram_start__ = ABSOLUTE(.) ;
-		*(.iwram)
-		*iwram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-		__iwram_end__ = ABSOLUTE(.) ;
-	} >iwram = 0xff
-
-	__data_lma = __iwram_lma + SIZEOF(.iwram) ;
-
-	.bss ALIGN(4) (NOLOAD):
-	{
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.) ;
-	}
-
-	.data ALIGN(4) : AT (__data_lma)
-	{
-		__data_start__ = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		__data_end__  =  ABSOLUTE(.);
-	} >iwram = 0xff
-
-	__iwram_overlay_lma = __data_lma + SIZEOF(.data);
-
-	PROVIDE (edata = .);
-	__iwram_overlay_start = . ;
-
-	OVERLAY ALIGN(4) : NOCROSSREFS AT (__iwram_overlay_lma)
-	{
-	   .iwram0 { *(.iwram0) . = ALIGN(4);}
-	   .iwram1 { *(.iwram1) . = ALIGN(4);}
-	   .iwram2 { *(.iwram2) . = ALIGN(4);}
-	   .iwram3 { *(.iwram3) . = ALIGN(4);}
-	   .iwram4 { *(.iwram4) . = ALIGN(4);}
-	   .iwram5 { *(.iwram5) . = ALIGN(4);}
-	   .iwram6 { *(.iwram6) . = ALIGN(4);}
-	   .iwram7 { *(.iwram7) . = ALIGN(4);}
-	   .iwram8 { *(.iwram8) . = ALIGN(4);}
-	   .iwram9 { *(.iwram9) . = ALIGN(4);}
-	} >iwram = 0xff
-
-	__ewram_lma = LOADADDR(.iwram0) + SIZEOF(.iwram0)+SIZEOF(.iwram1)+SIZEOF(.iwram2)+SIZEOF(.iwram3)+SIZEOF(.iwram4)+SIZEOF(.iwram5)+SIZEOF(.iwram6)+SIZEOF(.iwram7)+SIZEOF(.iwram8)+SIZEOF(.iwram9);
-
-	__iwram_overlay_end = __ewram_lma ;
-
-	/* v1.3 */
-	__ewram_start =  __ewram_lma ;
-
-	.ewram __ewram_start : AT (__ewram_lma)
-	{
-		*(.ewram)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		__ewram_end = ABSOLUTE(.);
-	} >ewram = 0xff
-
-	__ewram_overlay_lma = __ewram_lma + SIZEOF(.ewram);
-
-	.sbss ALIGN(4)(NOLOAD):
- 	{
-		__sbss_start__ = ABSOLUTE(.);
-		*(.sbss)
-		. = ALIGN(4);
-		__sbss_end__  = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-		__eheap_start = ABSOLUTE(.);
-	}
-
-	OVERLAY ALIGN(4): NOCROSSREFS AT (__ewram_overlay_lma)
-	{
-		.ewram0 { *(.ewram0) . = ALIGN(4);}
-		.ewram1 { *(.ewram1) . = ALIGN(4);}
-		.ewram2 { *(.ewram2) . = ALIGN(4);}
-		.ewram3 { *(.ewram3) . = ALIGN(4);}
-		.ewram4 { *(.ewram4) . = ALIGN(4);}
-		.ewram5 { *(.ewram5) . = ALIGN(4);}
-		.ewram6 { *(.ewram6) . = ALIGN(4);}
-		.ewram7 { *(.ewram7) . = ALIGN(4);}
-		.ewram8 { *(.ewram8) . = ALIGN(4);}
-		.ewram9 { *(.ewram9) . = ALIGN(4);}
-	} >ewram = 0xff
-	__ewram_overlay_end  = ABSOLUTE(.);
-
-	__eheap_start = __ewram_overlay_end ;
-
-	_end = __ewram_overlay_end;
-	__end__ = __ewram_overlay_end;
-	__rom_end__ = __ewram_overlay_end;
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/* DWARF debug sections.
-	   Symbols in the DWARF debugging sections are relative to the beginning
-	   of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/gba_mb.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
--T gba_mb.ld%s %(old_link)
-
-*startfile:
-gba_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/gp32.ld

@@ -1,165 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY
-  {
-  ram : ORIGIN = 0xc000000, LENGTH = 8M
-  }
-
-SECTIONS
-{
-  .init           :
-  {
-    __text_start = . ;
-    KEEP (*(.init))
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-  .plt            : { *(.plt) } >ram = 0xff
-
- 
- 	.text :   /* ALIGN (4): */
-	{
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } >ram =0xff
-
-  __text_end = . ;
-
-  .rodata :
-  {
-    *(.rodata)
-    *all.rodata*(*)
-    *(.roda)
-    *(.rodata.*)
-    *(.gnu.linkonce.r*)
-    SORT(CONSTRUCTORS)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ram
-   __exidx_start = .;
-  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ram
-   __exidx_end = .;
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) } >ram = 0xff
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) } >ram = 0xff
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) } >ram = 0xff
-  PROVIDE (__fini_array_end = .);
-  .ctors :
-  {
-    /* gcc uses crtbegin.o to find the start of the constructors, so
-       we make sure it is first.  Because this is a wildcard, it
-       doesn't matter if the user does not actually link against
-       crtbegin.o; the linker won't look for a file to match a
-       wildcard.  The wildcard also means that it doesn't matter which
-       directory crtbegin.o is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .dtors :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .eh_frame :
-  {
-    KEEP (*(.eh_frame))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .gcc_except_table :
-  {
-    *(.gcc_except_table)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-  .jcr            : { KEEP (*(.jcr)) } >ram = 0
-  .got            : { *(.got.plt) *(.got) } >ram = 0
-  __ro_end = . ;
-
-  .data ALIGN(4) :
-  {
-    __data_start = ABSOLUTE(.);
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  __data_end  =  ABSOLUTE(.);
-  } >ram = 0xff
-
-
-  .bss ALIGN(4) :
-  {
-   __bss_start = ABSOLUTE(.);
-   /* __bss_start__ = ABSOLUTE(.); */
-   *(.dynbss)
-   *(.gnu.linkonce.b*)
-   *(.bss*)
-   *(COMMON)
-   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-  __bss_end = ABSOLUTE(.) ;
-  __end__ = ABSOLUTE(.) ;
-  } > ram
-
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  .stack 0x80000 : { _stack = .; *(.stack) }
-  /* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/gp32.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T gp32.ld%s
-
-*startfile:
-gp32_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/gp32_crt0.s

@@ -1,74 +0,0 @@
-    .section	".init"
-	.code 32
-	.align
-	.global _start
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b		_start2
-
-@---------------------------------------------------------------------------------
-@ AXF addresses
-@---------------------------------------------------------------------------------
-_text_start:
-	.word   __text_start
-_ro_end:
-	.word   __ro_end
-_data_start:
-	.word   __data_start
-	.word   __bss_end
-_bss_start:
-	.word   __bss_start
-_bss_end:
-	.word   __bss_end
-
-@---------------------------------------------------------------------------------
-@ GamePark magic sequence
-@---------------------------------------------------------------------------------
-	.word   0x44450011
-	.word   0x44450011
-	.word   0x01234567
-	.word   0x12345678
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-
-@---------------------------------------------------------------------------------
-_start2:
-@---------------------------------------------------------------------------------
-	mrs		r0, CPSR
-	orr		r0, r0, #0xC0
-	msr		CPSR_ctl, r0
-
-	mrs		r0, CPSR
-	bic		r0, r0, #0xC0
-	orr		r0, r0, #0x40
-	msr		CPSR_ctl,r0
-
-@---------------------------------------------------------------------------------
-@ global constructors
-@---------------------------------------------------------------------------------
-	ldr		r3,=_call_main
-	mov		lr,r3
-	ldr		r3,=__libc_init_array
-	bx		r3
-@---------------------------------------------------------------------------------
-@ Jump to user code
-@---------------------------------------------------------------------------------
-_call_main:
-@---------------------------------------------------------------------------------
-	mov		lr, #0
-	ldr		r3, =main
-	bx		r3
-
-	.pool
-	.end

dkarm-eabi/crtls/gp32_gpsdk.ld

@@ -1,213 +0,0 @@
-/* GP32 Linker Script v1.2 by Jeff F              */
-/*  v1.0 - Original release                       */
-/*  v1.1 - Cleaned up and added MEMORY command    */
-/*	v1.2 - DJWillis - Added propper .init and     */
-/*         .fini for GCC 3.3.2 and above          */
-/*                                                */
-/* This file is released into the public domain   */
-/* for commercial or non-commercial use with no   */
-/* restrictions placed upon it.                   */
-/*                                                */
-/* NOTE!!!: This linker script defines the RAM    */
-/*   start addresses. In order for it to work     */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-/*                                                */
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/*                                                */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-/* SEARCH_DIR(/bin/arm); */
-
-/* Then use it like this: IWRAMHEAP                        */
-/* The linker script function "var1 += var2;" sometimes    */
-/* reports incorrect values in the *.map file but the      */
-/* actual value it calculates is usually, if not always,   */
-/* correct. If you leave out the ". = ALIGN(4);" at the    */
-/* end of each section then the return value of SIZEOF()   */
-/* is sometimes incorrect and "var1 += var2;" appears to   */
-/* not work as well. "var1 += var2" style functions are    */
-/* avoided below as a result.                              */
-
-/* The linker script MEMORY directive is not used here due    */
-/* to the fact that __text_start is not always a fixed value. */
-
-MEMORY
-  {
-  ram : ORIGIN = 0xc000000, LENGTH = 8M
-  }
-
-SECTIONS
-{
-  .text :   /* ALIGN (4): */
-  {
-    __text_start = . ;
-
-    *(EXCLUDE_FILE (*text.iwram*) .text)
-    *(.text.*)
-    *(.stub)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-    *(.glue_7)
-    *(.glue_7t)
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  __text_end = . ;
-
-
-  .init :
-  { 
-    *(.init) 
-  } > ram = 0xff
-
-  .jcr : 
-  { 
-    *(.jcr) 
-  } > ram = 0xff
-
-  .fini : 
-  { 
-    *(.fini) 
-  } > ram = 0xff
-
-  .rodata :
-  {
-    *(.rodata)
-    *all.rodata*(*)
-    *(.roda)
-    *(.rodata.*)
-    *(.gnu.linkonce.r*)
-    SORT(CONSTRUCTORS)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ram
-   __exidx_start = .;
-  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ram
-   __exidx_end = .;
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) } >ram = 0xff
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) } >ram = 0xff
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) } >ram = 0xff
-  PROVIDE (__fini_array_end = .);
-
-  .ctors :
-  {
-    /* gcc uses crtbegin.o to find the start of the constructors, so
-       we make sure it is first.  Because this is a wildcard, it
-       doesn't matter if the user does not actually link against
-       crtbegin.o; the linker won't look for a file to match a
-       wildcard.  The wildcard also means that it doesn't matter which
-       directory crtbegin.o is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .dtors :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .eh_frame :
-  {
-    KEEP (*(.eh_frame))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .gcc_except_table :
-  {
-    *(.gcc_except_table)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-  __ro_end = . ;
-
-  .data ALIGN(4) :
-  {
-    __data_start = ABSOLUTE(.);
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  __data_end  =  . ;
-
-  .bss ALIGN(4) :
-  {
-   __bss_start = ABSOLUTE(.);
-   /* __bss_start__ = ABSOLUTE(.); */
-   *(.dynbss)
-   *(.gnu.linkonce.b*)
-   *(COMMON)
-   *(.bss*)
-   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-    __bss_end = ABSOLUTE(.);
-  __end__ = ABSOLUTE(.);
-  } > ram
-
-
-  __eheap_end = . ;
-
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  .stack 0x80000 : { _stack = .; *(.stack) }
-  /* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/gp32_gpsdk.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T gp32_gpsdk.ld%s
-
-*startfile:
-gp32_gpsdk_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/gp32_gpsdk_crt0.s

@@ -1,246 +0,0 @@
-@****************************************************
-@*    gp32 crt0.S v1.0 by Jeff F                    *
-@****************************************************
-
-@ v1.0 - Original release
-@
-@ This file is released into the public domain for commercial
-@ or non-commercial usage with no restrictions placed upon it.
-
-    .TEXT
-
-@ Note: Normally it is the job of crt0.S to clear the BSS
-@ (Zero Initialized) section to 0x00, but in the case of
-@ the gp32 we do not have to do this because it is done
-@ by the gp32 bios after it loads the app.
-
-@ The official sdt dev kit uses 'Main ()' as the entry
-@ point. If you would rather use 'main ()' instead then
-@ comment out the next line.
-@
-@ You have to use 'main ()' at some point in your program
-@ if you want to do c++ code. GCC will do a call to constructor
-@ setup before executing 'main ()'. Using 'main ()' also increases
-@ your program size by ~5500 bytes.
-
-@ .equ __OfficialEntry, 1
-
-@ The official sdt dev kit initializes various things in init.o
-@ Crt0.S performs similar tasks for compatibility. If you don't
-@ wish to use the official libs, or those that are compatible,
-@ then you need to comment out the next line to prevent link errors.
-
- .equ __OfficialInits, 1
-
-
-    .GLOBAL     _start
-_start:
-        .ALIGN
-        .CODE 32
-
-    @ Start Vector
-
-        b       _GpInit
-
-        .word   __text_start    @ Start of text (Read Only) section
-_roe:   .word   __ro_end        @ End "
-_rws:   .word   __data_start    @ Start of data (Read/Write) section
-        .word   __bss_end       @ End of bss (this is the way sdt does it for some reason)
-_zis:   .word   __bss_start     @ Start of bss (Zero Initialized) section
-_zie:   .word   __bss_end       @ End "
-
-        .word   0x44450011
-        .word   0x44450011
-
-        .word   0x01234567
-        .word   0x12345678
-        .word   0x23456789
-        .word   0x34567890
-        .word   0x45678901
-        .word   0x56789012
-        .word   0x23456789
-        .word   0x34567890
-        .word   0x45678901
-        .word   0x56789012
-        .word   0x23456789
-        .word   0x34567890
-        .word   0x45678901
-        .word   0x56789012
-
-_GpInit:
-        mrs r0,CPSR
-        orr r0,r0,#0xc0
-        msr CPSR_fsxc,r0
-
-.ifdef __OfficialInits
-
-@ Call function in user_init.s
-@        bl  asm_user_entry
-
-@ Get pointer to GpSurfaceSet routine
-        mov r0,#0
-        swi 0xb
-        ldr r1,=GpSurfaceSet
-        ldr r2,=GpSurfaceFlip
-        str r0,[r1]
-        str r0,[r2]
-
-@ Get time passed
-        mov r0,#6
-        swi 0xb
-        ldr r1,=_timepassed
-        str r0,[r1]
-
-@ Get button stuff
-        mov r0,#0
-        swi 0x10
-        ldr r2,=_reg_io_key_a
-        ldr r3,=_reg_io_key_b
-        str r0,[r2]
-        str r1,[r3]
-
-@ Set heap start location
-        ldr r0,_zie
-        ldr r1,=HEAPSTART
-        str r0,[r1]
-
-@ Set heap end location
-        mov r0,#5
-        swi 0xb
-        ldr r1,=HEAPEND
-        sub r0,r0,#255
-        bic r0,r0,#3
-        str r0,[r1]
-
-@ Set App Argument
-        swi 0x15
-
-        mov r10,r0
-        mov r11,r1       @ possibly not needed but left in anyway
-
-        mrs r0,CPSR
-        bic r0,r0,#192
-        orr r0,r0,#64
-        msr CPSR_fsxc,r0
-
-        mov r0,r10
-        mov r1,r11       @ possibly not needed but left in anyway
-.endif
-
-@ Jump to Main ()
-
-.ifdef __OfficialEntry
-        ldr     r3,=Main
-.else
-        ldr     r3,=main
-.endif
-        bx  r3           @ Init.o uses 'mov pc,r3' but
-                         @ 'bx r3' is used here instead. This way
-                         @ the main function can be ARM or Thumb.
-
-.ifdef __OfficialInits
-
-    swi   0x12
-		orr		r1,r1,r2
-    and   r1,r1,r3
-		eor		r1,r1,r4
-		mov		r5,r1,lsr #4
-		add		r1,r1,r7
-    sub   r7,r7,r1
-		mov		r8,#0
-		mov		pc,r8
-    b   .
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		nop
-		nop
-		nop
-		nop
-		nop
-		nop
-
-        .GLOBAL _fw_init_for_dbg
-_fw_init_for_dbg:
-		stmdb	sp!,{r0-r12}
-
-		mov		r10,lr
-		mov		r11,sp
-
-    bic   r0,r0,#31      @ 0x1f
-    orr   r1,r0,#17      @ 0x11
-    orr   r2,r0,#19      @ 0x13
-		msr		cpsr_cxsf,r1
-		mov		r12,#4
-		add		r12,r12,pc
-		msr		cpsr_cxsf,r2
-    swi   0x1ff
-
-@		bl		asm_user_entry_path
-
-		mov		r0,r11
-		mov		r1,r10
-		add		r0,r0,#52
-		ldr		r2,[r0]
-		mov		lr,r1
-		stmdb	sp!,{r2}
-		stmdb	sp!,{r0-r12,lr}
-
-@ Copy RW Base - ZI Base
-    ldr   r0,=_roe         @ |Image$$RO$$Limit|
-    ldr   r3,=_zis         @ |Image$$ZI$$Base|
-    ldr   r2,=_rws         @ |Image$$RW$$Base|
-		sub	 	r3,r3,r2
-CopyRWData:
-		cmp	 	r3,#36
-    blt   CopyRWData2
-		ldmia	r0!,{r4-r12}
-		stmia	r2!,{r4-r12}
-		sub	 	r3,r3,#36
-		b		CopyRWData
-CopyRWData2:
-		cmp	 	r3,#0
-    ble   CopyRWData3
-		ldr	 	r4,[r0],#4
-		str	 	r4,[r2],#4
-		sub	 	r3,r3,#4
-    b   CopyRWData2
-CopyRWData3:
-
-@ Clear ZI section
-    ldr   r1,=_zie         @ |Image$$ZI$$Limit|
-    ldr   r0,=_zis         @ |Image$$ZI$$Base|
-		mov	 	r2,#0
-		mov	 	r3,r2
-		mov	 	r4,r2
-		mov	 	r5,r2
-		mov	 	r6,r2
-		mov	 	r7,r2
-		mov	 	r8,r2
-		mov	 	r9,r2
-		mov	 	r10,r2
-		mov	 	r11,r2
-		mov	 	r12,r2
-CopyZIData:
-		stmia	r0!,{r2-r12}
-		cmp	 	r0,r1
-		blt	 	CopyZIData
-
-		ldmia	sp!,{r0-r12,pc}
-
-.endif
-
-    .ALIGN
-    .POOL
-
-
-    .END
-

dkarm-eabi/patches/binutils-2.22.patch

@@ -1,162 +0,0 @@
-diff -Nbaur binutils-2.22/bfd/bfd-in2.h binutils-2.22-arm/bfd/bfd-in2.h
---- binutils-2.22/bfd/bfd-in2.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-arm/bfd/bfd-in2.h	2012-04-01 12:58:20.000000000 +0100
-@@ -38,6 +38,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -308,8 +310,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/bfd-in.h binutils-2.22-arm/bfd/bfd-in.h
---- binutils-2.22/bfd/bfd-in.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-arm/bfd/bfd-in.h	2012-04-01 12:58:20.000000000 +0100
-@@ -31,6 +31,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -301,8 +303,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/config.in binutils-2.22-arm/bfd/config.in
---- binutils-2.22/bfd/config.in	2011-05-12 08:41:40.000000000 +0100
-+++ binutils-2.22-arm/bfd/config.in	2012-04-03 17:35:45.000000000 +0100
-@@ -245,6 +245,9 @@
- /* Define if <sys/procfs.h> has win32_pstatus_t. */
- #undef HAVE_WIN32_PSTATUS_T
- 
-+/* Define to 1 if you have the <windows.h> header file. */
-+#undef HAVE_WINDOWS_H
-+
- /* Define to 1 if you have the <zlib.h> header file. */
- #undef HAVE_ZLIB_H
- 
-diff -Nbaur binutils-2.22/bfd/configure binutils-2.22-arm/bfd/configure
---- binutils-2.22/bfd/configure	2011-11-21 11:55:48.000000000 +0000
-+++ binutils-2.22-arm/bfd/configure	2012-04-03 17:35:45.000000000 +0100
-@@ -13508,6 +13508,22 @@
- 
- fi
- 
-+
-+for ac_header in windows.h dlfcn.h
-+do :
-+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-+eval as_val=\$$as_ac_Header
-+   if test "x$as_val" = x""yes; then :
-+  cat >>confdefs.h <<_ACEOF
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
- $as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
- if test "${gcc_cv_header_string+set}" = set; then :
-diff -Nbaur binutils-2.22/bfd/configure.in binutils-2.22-arm/bfd/configure.in
---- binutils-2.22/bfd/configure.in	2011-11-21 11:55:46.000000000 +0000
-+++ binutils-2.22-arm/bfd/configure.in	2012-04-03 17:35:45.000000000 +0100
-@@ -190,6 +190,9 @@
- GCC_HEADER_STDINT(bfd_stdint.h)
- AC_HEADER_TIME
- AC_HEADER_DIRENT
-+
-+AC_CHECK_HEADERS(windows.h dlfcn.h)
-+
- ACX_HEADER_STRING
- AC_CHECK_FUNCS(fcntl getpagesize setitimer sysconf fdopen getuid getgid fileno)
- AC_CHECK_FUNCS(strtoull)
-diff -Nbaur binutils-2.22/bfd/plugin.c binutils-2.22-arm/bfd/plugin.c
---- binutils-2.22/bfd/plugin.c	2011-07-11 16:03:07.000000000 +0100
-+++ binutils-2.22-arm/bfd/plugin.c	2012-04-03 17:35:45.000000000 +0100
-@@ -25,7 +25,13 @@
- #if BFD_SUPPORTS_PLUGINS
- 
- #include <assert.h>
-+#ifdef HAVE_DLFCN_H
- #include <dlfcn.h>
-+#elif defined (HAVE_WINDOWS_H)
-+#include <windows.h>
-+#else
-+#error Unknown how to handle dynamic-load-libraries.
-+#endif
- #include <stdarg.h>
- #include "plugin-api.h"
- #include "sysdep.h"
-@@ -34,6 +40,37 @@
- #include "libiberty.h"
- #include <dirent.h>
- 
-+#if !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)
-+
-+#define RTLD_NOW 0      /* Dummy value.  */
-+
-+static void *
-+dlopen (const char *file, int mode ATTRIBUTE_UNUSED)
-+{
-+  return LoadLibrary (file);
-+}
-+
-+static void *
-+dlsym (void *handle, const char *name)
-+{
-+  return GetProcAddress (handle, name);
-+}
-+
-+static int ATTRIBUTE_UNUSED
-+dlclose (void *handle)
-+{
-+  FreeLibrary (handle);
-+  return 0;
-+}
-+
-+static const char *
-+dlerror (void)
-+{
-+  return "Unable to load DLL.";
-+}
-+
-+#endif /* !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)  */
-+
- #define bfd_plugin_close_and_cleanup                  _bfd_generic_close_and_cleanup
- #define bfd_plugin_bfd_free_cached_info               _bfd_generic_bfd_free_cached_info
- #define bfd_plugin_new_section_hook                   _bfd_generic_new_section_hook
-diff -Nbaur binutils-2.22/include/opcode/arm.h binutils-2.22-arm/include/opcode/arm.h
---- binutils-2.22/include/opcode/arm.h	2011-05-31 15:12:55.000000000 +0100
-+++ binutils-2.22-arm/include/opcode/arm.h	2012-04-01 12:58:20.000000000 +0100
-@@ -109,7 +109,8 @@
- #define ARM_AEXT_V6KT2  (ARM_AEXT_V6T2 | ARM_EXT_V6K)
- #define ARM_AEXT_V6ZT2  (ARM_AEXT_V6T2 | ARM_EXT_SEC)
- #define ARM_AEXT_V6ZKT2 (ARM_AEXT_V6T2 | ARM_EXT_V6K | ARM_EXT_SEC)
--#define ARM_AEXT_V7_ARM	(ARM_AEXT_V6KT2 | ARM_EXT_V7 | ARM_EXT_BARRIER)
-+#define ARM_AEXT_V7_ARM	(ARM_AEXT_V6KT2 | ARM_EXT_V7 | ARM_EXT_BARRIER \
-+    | ARM_EXT_OS )
- #define ARM_AEXT_V7A	(ARM_AEXT_V7_ARM | ARM_EXT_V7A)
- #define ARM_AEXT_V7R	(ARM_AEXT_V7_ARM | ARM_EXT_V7R | ARM_EXT_DIV)
- #define ARM_AEXT_NOTM \

dkarm-eabi/patches/gcc-10.2.0.patch

@@ -0,0 +1,251 @@
+diff --git a/gcc/config/arm/arm-cpus.in b/gcc/config/arm/arm-cpus.in
+index 728be500b80..74c1abad635 100644
+--- a/gcc/config/arm/arm-cpus.in
++++ b/gcc/config/arm/arm-cpus.in
+@@ -392,7 +392,7 @@ begin arch armv6k
+  tune for mpcore
+  tune flags CO_PROC
+  base 6K
+- isa ARMv6k
++ isa ARMv6k VFPv2 FP_DBL
+  option fp add VFPv2 FP_DBL
+  optalias vfpv2 fp
+  option nofp remove ALL_FP
+diff --git a/gcc/config/arm/t-arm-elf b/gcc/config/arm/t-arm-elf
+index 3d92bd23322..35cefcde676 100644
+--- a/gcc/config/arm/t-arm-elf
++++ b/gcc/config/arm/t-arm-elf
+@@ -16,111 +16,14 @@
+ # along with GCC; see the file COPYING3.  If not see
+ # <http://www.gnu.org/licenses/>.
+ 
+-# Build a very basic set of libraries that should cater for most cases.
+-
+-# Single-precision floating-point is NOT supported; we don't build a
+-# suitable library for that.  Use the rm-profile config in that case.
+-
+-# PART 1 - Useful groups of options
+-
+-dp_fpus		:= vfp vfpv2 vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16 \
+-		   neon neon-vfpv3 neon-fp16 vfpv4 neon-vfpv4 vfpv4-d16 \
+-		   fpv5-d16 fp-armv8 neon-fp-armv8 crypto-neon-fp-armv8 \
+-		   vfp3
+-
+-sp_fpus		:= vfpv3xd vfpv3xd-fp16  fpv4-sp-d16 fpv5-sp-d16
+-
+-v7a_fps		:= vfpv3 vfpv3-fp16 vfpv4 simd neon-fp16 neon-vfpv4
+-v7ve_fps	:= vfpv3-d16 vfpv3 vfpv3-d16-fp16 vfpv3-fp16 vfpv4 neon \
+-		   neon-fp16 simd
+-
+-# Not all these permutations exist for all architecture variants, but
+-# it seems to work ok.
+-v8_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-# We don't do anything special with these.  Pre-v4t probably doesn't work.
+-all_early_nofp	:= armv4 armv4t armv5t
+-
+-all_early_arch	:= armv5tej armv6 armv6j armv6k armv6z armv6kz \
+-		   armv6zk armv6t2 iwmmxt iwmmxt2
+-
+-all_v7_a_r	:= armv7-a armv7ve armv7-r
+-
+-all_v8_archs	:= armv8-a armv8-a+crc armv8.1-a armv8.2-a armv8.3-a armv8.4-a \
+-		   armv8.5-a armv8.6-a
+-
+-# No floating point variants, require thumb1 softfp
+-all_nofp_t	:= armv6-m armv6s-m armv8-m.base
+-
+-all_nofp_t2	:= armv7-m
+-
+-all_sp_only	:= armv7e-m armv8-m.main
+-
+-MULTILIB_OPTIONS     =
+-MULTILIB_DIRNAMES    =
++MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k mfloat-abi=hard
++MULTILIB_DIRNAMES    = thumb be armv6k fpu
+ MULTILIB_EXCEPTIONS  = 
+ MULTILIB_MATCHES     =
+-MULTILIB_REUSE	     =
+-
+-# PART 2 - multilib build rules
+-
+-MULTILIB_OPTIONS     += marm/mthumb
+-MULTILIB_DIRNAMES    += arm thumb
+-
+-MULTILIB_OPTIONS     += mfpu=auto
+-MULTILIB_DIRNAMES    += autofp
+-
+-MULTILIB_OPTIONS     += march=armv5te+fp/march=armv7+fp
+-MULTILIB_DIRNAMES    += v5te v7
+-
+-MULTILIB_OPTIONS     += mfloat-abi=hard
+-MULTILIB_DIRNAMES    += fpu
+-
+-# Build a total of 4 library variants (base options plus the following):
+-MULTILIB_REQUIRED    += mthumb
+-MULTILIB_REQUIRED    += marm/mfpu=auto/march=armv5te+fp/mfloat-abi=hard
+-MULTILIB_REQUIRED    += mthumb/mfpu=auto/march=armv7+fp/mfloat-abi=hard
+-
+-# PART 3 - Match rules
+-
+-# Map all supported FPUs onto mfpu=auto
+-MULTILIB_MATCHES     += $(foreach FPU, $(dp_fpus), \
+-			  mfpu?auto=mfpu?$(FPU))
+-
+-MULTILIB_MATCHES     += march?armv5te+fp=march?armv5te
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_early_arch), \
+-		          march?armv5te+fp=march?$(ARCH) \
+-			  march?armv5te+fp=march?$(ARCH)+fp)
+-
+-MULTILIB_MATCHES     += march?armv7+fp=march?armv7
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7a_fps), \
+-		          march?armv7+fp=march?armv7-a+$(FPARCH))
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7ve_fps), \
+-		          march?armv7+fp=march?armv7ve+$(FPARCH))
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v7_a_r), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  march?armv7+fp=march?$(ARCH)+fp)
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v8_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v8_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
++MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard 
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, armv7e-m armv8-m.mainline, \
+-			  march?armv7+fp=march?$(ARCH)+fp.dp)
+ 
+-# PART 4 - Reuse rules
++MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
++MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
+ 
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto/march.armv5te+fp
+-MULTILIB_REUSE	     += mthumb=mthumb/march.armv5te+fp
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=marm/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=mfpu.auto/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mthumb/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mfpu.auto/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=march.armv7+fp/mfloat-abi.hard
+diff --git a/gcc/config/arm/unknown-elf.h b/gcc/config/arm/unknown-elf.h
+index 9ad2947505f..1790caa8e88 100644
+--- a/gcc/config/arm/unknown-elf.h
++++ b/gcc/config/arm/unknown-elf.h
+@@ -29,7 +29,7 @@
+ #endif
+ 
+ /* Now we define the strings used to build the spec file.  */
+-#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
++#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
+ 
+ #undef  STARTFILE_SPEC
+ #define STARTFILE_SPEC	\
+@@ -93,4 +93,5 @@
+    udivmoddi4, which will depend on the exception unwind routines,
+    which will depend on abort, which is defined in libc.  */ 
+ #undef LINK_GCC_C_SEQUENCE_SPEC
+-#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %{!nolibc:%L} --end-group"
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
++
+diff --git a/gcc/config/i386/host-mingw32.c b/gcc/config/i386/host-mingw32.c
+index 250fef59b55..36b2239aa5d 100644
+--- a/gcc/config/i386/host-mingw32.c
++++ b/gcc/config/i386/host-mingw32.c
+@@ -44,9 +44,6 @@ static size_t mingw32_gt_pch_alloc_granularity (void);
+ 
+ static inline void w32_error(const char*, const char*, int, const char*);
+ 
+-/* FIXME: Is this big enough?  */
+-static const size_t pch_VA_max_size  = 128 * 1024 * 1024;
+-
+ /* Granularity for reserving address space.  */
+ static size_t va_granularity = 0x10000;
+ 
+@@ -88,9 +85,6 @@ static void *
+ mingw32_gt_pch_get_address (size_t size, int)
+ {
+   void* res;
+-  size = (size + va_granularity - 1) & ~(va_granularity - 1);
+-  if (size > pch_VA_max_size)
+-    return NULL;
+ 
+   /* FIXME: We let system determine base by setting first arg to NULL.
+      Allocating at top of available address space avoids unnecessary
+@@ -100,7 +94,7 @@ mingw32_gt_pch_get_address (size_t size, int)
+      If we allocate at bottom we need to reserve the address as early
+      as possible and at the same point in each invocation. */
+  
+-  res = VirtualAlloc (NULL, pch_VA_max_size,
++  res = VirtualAlloc (NULL, size,
+ 		      MEM_RESERVE | MEM_TOP_DOWN,
+ 		      PAGE_NOACCESS);
+   if (!res)
+@@ -150,7 +144,7 @@ mingw32_gt_pch_use_address (void *addr, size_t size, int fd,
+ 
+   /* Offset must be also be a multiple of allocation granularity for
+      this to work.  We can't change the offset. */ 
+-  if ((offset & (va_granularity - 1)) != 0 || size > pch_VA_max_size)
++  if ((offset & (va_granularity - 1)) != 0)
+     return -1;
+ 
+ 
+diff --git a/gcc/gcc.c b/gcc/gcc.c
+index 9f790db0daf..97f52d0b893 100644
+--- a/gcc/gcc.c
++++ b/gcc/gcc.c
+@@ -793,6 +793,11 @@ proper position among the other output files.  */
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1085,6 +1090,7 @@ static const char *link_spec = LINK_SPEC;
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1582,6 +1588,7 @@ static struct spec_list static_specs[] =
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff --git a/libgcc/config/arm/t-bpabi b/libgcc/config/arm/t-bpabi
+index dddddc7c444..c2502597953 100644
+--- a/libgcc/config/arm/t-bpabi
++++ b/libgcc/config/arm/t-bpabi
+@@ -17,4 +17,4 @@ SHLIB_MAPFILES += $(srcdir)/config/arm/libgcc-bpabi.ver
+ # On ARM, specifying -fnon-call-exceptions will needlessly pull in
+ # the unwinder in simple programs which use 64-bit division.  Omitting
+ # the option is safe.
+-LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
++LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index 3f769a1c660..e005d8304b7 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -325,7 +325,7 @@ register_tm_clones (void)
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance

dkarm-eabi/patches/gcc-4.7.0.patch

@@ -1,167 +0,0 @@
-diff -Nbaur gcc-4.7.0/gcc/config/arm/t-arm-elf gcc-4.7.0-arm/gcc/config/arm/t-arm-elf
---- gcc-4.7.0/gcc/config/arm/t-arm-elf	2011-11-02 15:23:48.000000000 +0000
-+++ gcc-4.7.0-arm/gcc/config/arm/t-arm-elf	2012-04-05 20:36:17.000000000 +0100
-@@ -26,22 +26,44 @@
- #MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
- #MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
- 
--#MULTILIB_OPTIONS      += march=armv7
--#MULTILIB_DIRNAMES     += thumb2
--#MULTILIB_EXCEPTIONS   += march=armv7* marm/*march=armv7*
--#MULTILIB_MATCHES      += march?armv7=march?armv7-a
--#MULTILIB_MATCHES      += march?armv7=march?armv7-r
--#MULTILIB_MATCHES      += march?armv7=march?armv7-m
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-a8
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-r4
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-m3
-+#mfloat-abi=hard|mfpu=fpv4-sp-d16
-+
-+MULTILIB_OPTIONS      += march=armv7/march=armv6-m/mcpu=cortex-m4
-+MULTILIB_DIRNAMES     += thumb2 armv6-m cortex-m4
-+MULTILIB_EXCEPTIONS   += march=armv7* marm/*march=armv7*
-+MULTILIB_EXCEPTIONS   += march=armv6-m* marm/*march=armv6-m*
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* marm/*mcpu=cortex-m4*
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* mthumb/mcpu=cortex-m4
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* mthumb/mcpu=cortex-m4/mbig-endian
-+MULTILIB_MATCHES      += march?armv7=march?armv7-a
-+MULTILIB_MATCHES      += march?armv7=march?armv7-r
-+MULTILIB_MATCHES      += march?armv7=march?armv7-m
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-a8
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-r4
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-m3
-+MULTILIB_MATCHES      += march?armv6-m=mcpu?cortex-m0
-+MULTILIB_MATCHES      += march?armv6-m=mcpu?cortex-m1
-+
-+MULTILIB_OPTIONS      += mfloat-abi=hard mfpu=fpv4-sp-d16
-+MULTILIB_DIRNAMES     += float-abi-hard fpuv4-sp-d16
-+MULTILIB_EXCEPTIONS   += mfloat* marm/mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb*march=armv6-m*mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb*march=armv7*mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mcpu=cortex-m4/mfloat-abi=hard
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mcpu=cortex-m4/mfloat-abi=hard/mbig-endian
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb*march=armv6-m*mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb*march=armv7*mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb/mcpu=cortex-m4/mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb/mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* marm/mfpu*
- 
- # Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
- # express that here?  Also, we really need architecture v5e or later
- # (mcrr etc).
--MULTILIB_OPTIONS       += mfloat-abi=hard
--MULTILIB_DIRNAMES      += fpu
--MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
-+#MULTILIB_OPTIONS       += mfloat-abi=hard
-+#MULTILIB_DIRNAMES      += fpu
-+#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
- 
-@@ -49,9 +71,9 @@
- # MULTILIB_DIRNAMES   += ep9312
- # MULTILIB_EXCEPTIONS += *mthumb/*mcpu=ep9312*
- # 	
--# MULTILIB_OPTIONS     += mlittle-endian/mbig-endian
--# MULTILIB_DIRNAMES    += le be
--# MULTILIB_MATCHES     += mbig-endian=mbe mlittle-endian=mle
-+MULTILIB_OPTIONS     += mlittle-endian/mbig-endian
-+MULTILIB_DIRNAMES    += le be
-+MULTILIB_MATCHES     += mbig-endian=mbe mlittle-endian=mle
- # 
- # MULTILIB_OPTIONS    += mfloat-abi=hard/mfloat-abi=soft
- # MULTILIB_DIRNAMES   += fpu soft
-diff -Nbaur gcc-4.7.0/gcc/config/arm/unknown-elf.h gcc-4.7.0-arm/gcc/config/arm/unknown-elf.h
---- gcc-4.7.0/gcc/config/arm/unknown-elf.h	2011-03-31 13:13:13.000000000 +0100
-+++ gcc-4.7.0-arm/gcc/config/arm/unknown-elf.h	2012-04-05 20:36:17.000000000 +0100
-@@ -94,4 +94,4 @@
-    udivmoddi4, which will depend on the exception unwind routines,
-    which will depend on abort, which is defined in libc.  */ 
- #undef LINK_GCC_C_SEQUENCE_SPEC
--#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
-+#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
-diff -Nbaur gcc-4.7.0/gcc/gcc.c gcc-4.7.0-arm/gcc/gcc.c
---- gcc-4.7.0/gcc/gcc.c	2012-02-28 17:31:38.000000000 +0000
-+++ gcc-4.7.0-arm/gcc/gcc.c	2012-04-05 20:36:17.000000000 +0100
-@@ -548,6 +548,11 @@
- #endif
- #endif
- 
-+#ifndef LIBGLOSS_SPEC
-+# define LIBGLOSS_SPEC "-lsysbase"
-+#endif
-+
-+
- /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
- #ifndef STARTFILE_SPEC
- #define STARTFILE_SPEC  \
-@@ -717,6 +722,7 @@
- static const char *mflib_spec = MFLIB_SPEC;
- static const char *link_gomp_spec = "";
- static const char *libgcc_spec = LIBGCC_SPEC;
-+static const char *libgloss_spec = LIBGLOSS_SPEC;
- static const char *endfile_spec = ENDFILE_SPEC;
- static const char *startfile_spec = STARTFILE_SPEC;
- static const char *linker_name_spec = LINKER_NAME;
-@@ -1201,6 +1207,7 @@
-   INIT_STATIC_SPEC ("mflib",			&mflib_spec),
-   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
-   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
-+  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
-   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
-   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
-   INIT_STATIC_SPEC ("version",			&compiler_version),
-diff -Nbaur gcc-4.7.0/libcpp/Makefile.in gcc-4.7.0-arm/libcpp/Makefile.in
---- gcc-4.7.0/libcpp/Makefile.in	2012-03-22 07:37:39.000000000 +0000
-+++ gcc-4.7.0-arm/libcpp/Makefile.in	2012-04-05 20:36:17.000000000 +0100
-@@ -214,8 +214,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -Nbaur gcc-4.7.0/libgcc/crtstuff.c gcc-4.7.0-arm/libgcc/crtstuff.c
---- gcc-4.7.0/libgcc/crtstuff.c	2011-12-06 21:35:41.000000000 +0000
-+++ gcc-4.7.0-arm/libgcc/crtstuff.c	2012-04-05 20:36:50.000000000 +0100
-@@ -49,7 +49,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
--
-+#define USED_FOR_TARGET
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
-diff -Nbaur gcc-4.7.0/libgcc/Makefile.in gcc-4.7.0-arm/libgcc/Makefile.in
---- gcc-4.7.0/libgcc/Makefile.in	2011-11-22 03:01:02.000000000 +0000
-+++ gcc-4.7.0-arm/libgcc/Makefile.in	2012-04-05 20:36:17.000000000 +0100
-@@ -500,14 +500,14 @@
- lib2-divmod-o = $(patsubst %,%$(objext),$(LIB2_DIVMOD_FUNCS))
- $(lib2-divmod-o): %$(objext): $(srcdir)/libgcc2.c
- 	$(gcc_compile) -DL$* -c $< \
--	  -fexceptions -fnon-call-exceptions $(vis_hide)
-+	  -fno-exceptions -fnon-call-exceptions $(vis_hide)
- libgcc-objects += $(lib2-divmod-o)
- 
- ifeq ($(enable_shared),yes)
- lib2-divmod-s-o = $(patsubst %,%_s$(objext),$(LIB2_DIVMOD_FUNCS))
- $(lib2-divmod-s-o): %_s$(objext): $(srcdir)/libgcc2.c
- 	$(gcc_s_compile) -DL$* -c $< \
--	  -fexceptions -fnon-call-exceptions
-+	  -fno-exceptions -fnon-call-exceptions
- libgcc-s-objects += $(lib2-divmod-s-o)
- endif
- 
-@@ -810,7 +810,7 @@
- # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
- # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
- 
--c_flags := -fexceptions
-+c_flags := -fno-exceptions
- 
- ifeq ($(enable_shared),yes)
- 

dkarm-eabi/patches/gdb-7.4.patch

@@ -1,33 +0,0 @@
-diff -Nbaur gdb-7.4/gdb/Makefile.in gdb-7.4-arm/gdb/Makefile.in
---- gdb-7.4/gdb/Makefile.in	2012-01-06 04:43:01.000000000 +0000
-+++ gdb-7.4-arm/gdb/Makefile.in	2012-02-28 03:07:12.000000000 +0000
-@@ -2195,10 +2195,10 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+#@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+#@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+#@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+#@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.4/sim/common/Make-common.in gdb-7.4-arm/sim/common/Make-common.in
---- gdb-7.4/sim/common/Make-common.in	2012-01-06 04:54:38.000000000 +0000
-+++ gdb-7.4-arm/sim/common/Make-common.in	2012-02-28 03:07:41.000000000 +0000
-@@ -417,10 +417,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)

dkarm-eabi/rules/base_rules

@@ -1,137 +0,0 @@
-#---------------------------------------------------------------------------------
-# change shell on Snow Leopard
-#---------------------------------------------------------------------------------
-UNAME_S	:=	$(shell uname -s)
-UNAME_R	:=	$(shell uname -r)
-
-ifneq (,$(findstring Darwin,$(UNAME_S)))
-	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
-		export SHELL=/bin/bash
-	endif
-endif
-#---------------------------------------------------------------------------------
-# path to tools
-#---------------------------------------------------------------------------------
-export PORTLIBS	:=	$(DEVKITPRO)/portlibs/arm
-export PATH	:=	$(DEVKITARM)/bin:$(PORTLIBS)/bin:$(PATH)
-
-#---------------------------------------------------------------------------------
-# the prefix on the compiler executables
-#---------------------------------------------------------------------------------
-PREFIX		:=	arm-eabi-
-
-export CC	:=	$(PREFIX)gcc
-export CXX	:=	$(PREFIX)g++
-export AS	:=	$(PREFIX)as
-export AR	:=	$(PREFIX)ar
-export OBJCOPY	:=	$(PREFIX)objcopy
-
-ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
-
-ifneq (,$(ISVC))
-	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
-endif
-
-#---------------------------------------------------------------------------------
-%.a:
-#---------------------------------------------------------------------------------
-	@echo $(notdir $@)
-	@rm -f $@
-	$(AR) -rc $@ $^
-
-#---------------------------------------------------------------------------------
-%.arm.o: %.arm.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.arm.d $(CXXFLAGS) -marm -c $< -o $@ $(ERROR_FILTER)
-	
-#---------------------------------------------------------------------------------
-%.arm.o: %.arm.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.arm.d $(CFLAGS) -marm -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.arm.o: %.arm.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.arm.d $(OBJCFLAGS) -marm -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.thumb.o: %.thumb.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.thumb.d $(CXXFLAGS) -mthumb -c $< -o $@ $(ERROR_FILTER)
-	
-#---------------------------------------------------------------------------------
-%.thumb.o: %.thumb.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.thumb.d $(CFLAGS) -mthumb -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.thumb.o: %.thumb.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.thumb.d $(OBJCFLAGS) -mthumb -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.iwram.o: %.iwram.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.iwram.d $(CXXFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-	
-#---------------------------------------------------------------------------------
-%.iwram.o: %.iwram.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.iwram.d $(CFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.iwram.o: %.iwram.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.iwram.d $(OBJCFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.itcm.o: %.itcm.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.itcm.d $(CXXFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-	
-#---------------------------------------------------------------------------------
-%.itcm.o: %.itcm.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.itcm.d $(CFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.itcm.o: %.itcm.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.itcm.d $(OBJCFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-
-#---------------------------------------------------------------------------------
-%.o: %.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
-	
-#---------------------------------------------------------------------------------
-%.o: %.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(OBJCFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.s
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.S
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-# canned command sequence for binary data
-#---------------------------------------------------------------------------------
-define bin2o
-	bin2s $< | $(AS) -o $(@)
-	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo $(<F) | tr . _)`.h
-	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo $(<F) | tr . _)`.h
-	echo "extern const u32" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo $(<F) | tr . _)`.h
-endef
-

dkarm-eabi/rules/ds_rules

@@ -1,52 +0,0 @@
-ifeq ($(strip $(DEVKITPRO)),)
-$(error "Please set DEVKITPRO in your environment. export DEVKITPRO=<path to>devkitPro)
-endif
-
-include $(DEVKITARM)/base_rules
-
-LIBNDS	:=	$(DEVKITPRO)/libnds
-
-ifeq ($(strip $(GAME_TITLE)),)
-GAME_TITLE	:=	$(notdir $(OUTPUT))
-endif
-
-ifeq ($(strip $(GAME_SUBTITLE1)),)
-GAME_SUBTITLE1	:=	www.devkitpro.org
-endif
-
-ifeq ($(strip $(GAME_SUBTITLE2)),)
-GAME_SUBTITLE2	:=	www.drunkencoders.com
-endif
-
-ifeq ($(strip $(GAME_ICON)),)
-GAME_ICON      :=      $(DEVKITPRO)/libnds/icon.bmp
-endif
-
-ifneq ($(strip $(NITRO_FILES)),)
-_ADDFILES	:=	-d $(NITRO_FILES)
-endif
-
-#---------------------------------------------------------------------------------
-%.nds: %.arm9
-	@ndstool -c $@ -9 $< -b $(GAME_ICON) "$(GAME_TITLE);$(GAME_SUBTITLE1);$(GAME_SUBTITLE2)" $(_ADDFILES)
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.nds: %.elf
-	@ndstool -c $@ -9 $< -b $(GAME_ICON) "$(GAME_TITLE);$(GAME_SUBTITLE1);$(GAME_SUBTITLE2)" $(_ADDFILES)
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.arm9: %.elf
-	@$(OBJCOPY) -O binary $< $@
-	@echo built ... $(notdir $@)
- 
-#---------------------------------------------------------------------------------
-%.arm7: %.elf
-	@$(OBJCOPY) -O binary $< $@
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking $(notdir $@)
-	@$(LD)  $(LDFLAGS) $(OFILES) $(LIBPATHS) $(LIBS) -o $@

dkarm-eabi/rules/gba_rules

@@ -1,23 +0,0 @@
-ifeq ($(strip $(DEVKITPRO)),)
-$(error "Please set DEVKITPRO in your environment. export DEVKITPRO=<path to>devkitPro)
-endif
-
-include $(DEVKITARM)/base_rules
-
-LIBGBA	:=	$(DEVKITPRO)/libgba
-
-#---------------------------------------------------------------------------------
-%.gba: %.elf
-	@$(OBJCOPY) -O binary $< $@
-	@echo built ... $(notdir $@)
-	@gbafix $@
-
-#---------------------------------------------------------------------------------
-%_mb.elf:
-	@echo linking multiboot
-	@$(LD) -specs=gba_mb.specs $(LDFLAGS) $(OFILES) $(LIBPATHS) $(LIBS) -o $@
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking cartridge
-	@$(LD)  $(LDFLAGS) -specs=gba.specs $(OFILES) $(LIBPATHS) $(LIBS) -o $@

dkarm-eabi/rules/gp32_rules

@@ -1,18 +0,0 @@
--include $(DEVKITARM)/base_rules
-
-LIBMIRKO	:=	$(DEVKITPRO)/libmirko
-
-#---------------------------------------------------------------------------------
-%.fxe: %.bin
-	@b2fxec -a "$(AUTHOR)" -t "$(TITLE)" $< $@
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.bin: %.elf
-	@$(OBJCOPY) -O binary $< $@
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking binary
-	@$(LD)  $(LDFLAGS) -specs=gp32.specs $(OFILES) $(LIBPATHS) $(LIBS) -o $@

dkarm-eabi/scripts/build-crtls.sh

@@ -1,47 +1,26 @@
 #!/bin/sh
 
+#---------------------------------------------------------------------------------
+# set env variables
+#---------------------------------------------------------------------------------
 export DEVKITPRO=$TOOLPATH
 export DEVKITARM=$DEVKITPRO/devkitARM
 
 #---------------------------------------------------------------------------------
-# copy base rulesets
+# Install the rules files
 #---------------------------------------------------------------------------------
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/rules/* $prefix
+cd $BUILDDIR
+
+tar -xvf $SRCDIR/devkitarm-rules-$DKARM_RULES_VER.tar.gz
+cd devkitarm-rules-$DKARM_RULES_VER
+make install
 
 #---------------------------------------------------------------------------------
-# Install and build the gba crt
+# Install and build the crt0 files
 #---------------------------------------------------------------------------------
+cd $BUILDDIR
 
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/arm-eabi/lib/
+tar -xvf $SRCDIR/devkitarm-crtls-$DKARM_CRTLS_VER.tar.gz
-cd $prefix/arm-eabi/lib/
+cd devkitarm-crtls-$DKARM_CRTLS_VER
-$MAKE CRT=gba
+make install
-$MAKE CRT=gp32
-$MAKE CRT=er
-$MAKE CRT=gp32_gpsdk
-$MAKE CRT=ds_arm7
-$MAKE CRT=ds_arm9
-$MAKE CRT=ds_cart
 
-cd $BUILDDIR/libnds-$LIBNDS_VER
-$MAKE || { echo "error building libnds"; exit 1; }
-$MAKE install || { echo "error installing libnds"; exit 1; }
-
-cd $BUILDDIR/default-arm7-$DEFAULT_ARM7_VER
-$MAKE || { echo "error building default arm7"; exit 1; }
-$MAKE install || { echo "error installing default arm7"; exit 1; }
-
-cd $BUILDDIR/libfat-$LIBFAT_VER
-$MAKE nds-install || { echo "error building nds libfat"; exit 1; }
-$MAKE gba-install || { echo "error installing gba libfat"; exit 1; }
-
-cd $BUILDDIR/maxmod-$MAXMOD_VER
-$MAKE || { echo "error building maxmod"; exit 1; }
-$MAKE install || { echo "error installing maxmod"; exit 1; }
-
-cd $BUILDDIR/libmirko-$LIBMIRKO_VER
-$MAKE || { echo "error building libmirko"; exit 1; }
-$MAKE install || { echo "error installing libmirko"; exit 1; }
-
-cd $BUILDDIR/libfilesystem-$FILESYSTEM_VER
-$MAKE || { echo "error building libfilesystem"; exit 1; }
-$MAKE install || { echo "error installing libfilesystem"; exit 1; }

dkarm-eabi/scripts/build-gcc.sh

@@ -10,9 +10,10 @@ cd $target/binutils
 
 if [ ! -f configured-binutils ]
 then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+	CPPFLAGS="$cppflags $CPPFLAGS" LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
-        --prefix=$prefix --target=$target --disable-nls --disable-dependency-tracking --disable-werror \
+        --prefix=$prefix --target=$target --disable-nls --disable-werror \
-	--enable-lto --enable-plugins --enable-poison-system-directories \
+	--enable-lto --enable-plugins \
+	--enable-poison-system-directories \
 	$CROSS_PARAMS \
         || { echo "Error configuring binutils"; exit 1; }
 	touch configured-binutils
@@ -34,27 +35,40 @@ cd $BUILDDIR
 #---------------------------------------------------------------------------------
 # build and install just the c compiler
 #---------------------------------------------------------------------------------
-mkdir -p $target/gcc-stage1
+mkdir -p $target/gcc
-cd $target/gcc-stage1
+cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
+	CPPFLAGS="$cppflags $CPPFLAGS" \
-		--enable-languages=c,c++,objc,obj-c++ \
+	LDFLAGS="$ldflags" \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	LDFLAGS_FOR_TARGET="" \
+	../../gcc-$GCC_VER/configure \
+		--enable-languages=c,c++,objc,lto \
+		--with-gnu-as --with-gnu-ld --with-gcc \
 		--with-march=armv4t\
+		--enable-cxx-flags='-ffunction-sections' \
+		--disable-libstdcxx-verbose \
 		--enable-poison-system-directories \
 		--enable-interwork --enable-multilib \
-		--disable-dependency-tracking \
+		--enable-threads --disable-win32-registry --disable-nls --disable-debug\
-		--disable-threads --disable-win32-registry --disable-nls --disable-debug\
 		--disable-libmudflap --disable-libssp --disable-libgomp \
 		--disable-libstdcxx-pch \
+		--enable-libstdcxx-time=yes \
+		--enable-libstdcxx-filesystem-ts \
 		--target=$target \
 		--with-newlib \
 		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 		--prefix=$prefix \
-		--enable-lto $plugin_ld\
+		--enable-lto\
-		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 39" \
+		--with-system-zlib \
+		--disable-tm-clone-registry \
+		--disable-__cxa_atexit \
+		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 55" \
 		$CROSS_PARAMS \
+		$CROSS_GCC_PARAMS \
 		|| { echo "Error configuring gcc"; exit 1; }
 	touch configured-gcc
 fi
@@ -75,6 +89,11 @@ fi
 unset CFLAGS
 cd $BUILDDIR
 
+OLD_CC=$CC
+OLDCXX=$CXX
+unset CC
+unset CXX
+
 #---------------------------------------------------------------------------------
 # build and install newlib
 #---------------------------------------------------------------------------------
@@ -83,10 +102,11 @@ cd $target/newlib
 
 if [ ! -f configured-newlib ]
 then
-	CFLAGS_FOR_TARGET="-DREENTRANT_SYSCALLS_PROVIDED -D__DEFAULT_UTF8__ -O2" ../../newlib-$NEWLIB_VER/configure \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	../../newlib-$NEWLIB_VER/configure \
 	--disable-newlib-supplied-syscalls \
 	--enable-newlib-mb \
-	--enable-newlib-io-long-long \
+	--disable-newlib-wide-orient \
 	--target=$target \
 	--prefix=$prefix \
 	|| { echo "Error configuring newlib"; exit 1; }
@@ -102,10 +122,13 @@ fi
 
 if [ ! -f installed-newlib ]
 then
-	$MAKE install || { echo "Error installing newlib"; exit 1; }
+	$MAKE install -j1 || { echo "Error installing newlib"; exit 1; }
 	touch installed-newlib
 fi
 
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
 #---------------------------------------------------------------------------------
 # build and install the final compiler
 #---------------------------------------------------------------------------------
@@ -129,34 +152,3 @@ fi
 rm -fr $prefix/$target/sys-include
 
 cd $BUILDDIR
-
-#---------------------------------------------------------------------------------
-# build and install the debugger
-#---------------------------------------------------------------------------------
-mkdir -p $target/gdb
-cd $target/gdb
-
-PLATFORM=`uname -s`
-
-if [ ! -f configured-gdb ]
-then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" ../../gdb-$GDB_VER/configure \
-	--disable-nls --prefix=$prefix --target=$target --disable-werror \
-	--disable-dependency-tracking \
-	$CROSS_PARAMS \
-	|| { echo "Error configuring gdb"; exit 1; }
-	touch configured-gdb
-fi
-
-if [ ! -f built-gdb ]
-then
-	$MAKE || { echo "Error building gdb"; exit 1; }
-	touch built-gdb
-fi
-
-if [ ! -f installed-gdb ]
-then
-	$MAKE install || { echo "Error installing gdb"; exit 1; }
-	touch installed-gdb
-fi
-

dkarm-eabi/scripts/build-tools.sh

@@ -1,20 +0,0 @@
-#!/bin/bash
-cd $BUILDDIR
-
-for archive in $hostarchives
-do
-	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
-	cd $BUILDDIR/$dir
-	if [ ! -f configured ]; then
-		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$prefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
-		touch configured
-	fi
-	if [ ! -f built ]; then
-		$MAKE || { echo "error building $archive"; exit 1; }
-		touch built
-	fi
-	if [ ! -f installed ]; then
-		$MAKE install || { echo "error installing $archive"; exit 1; }
-		touch installed
-	fi
-done

dkppc/crtls/ogc.ld

@@ -93,7 +93,11 @@ SECTIONS
 
 	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
 	.rodata1   : { *(.rodata1) }
-	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
+	.sdata2   : { 
+		PROVIDE(_SDA2_BASE_ = . );
+		*(.sdata2) *(.sdata2.*)
+		*(.gnu.linkonce.s2.*)
+	}
 	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  */
@@ -174,6 +178,7 @@ SECTIONS
 
 	.sdata     :
 	{
+		PROVIDE(_SDA_BASE_ = . );
 		*(.sdata)
 		*(.sdata.*)
 		*(.gnu.linkonce.s.*)

dkppc/crtls/rvl.ld

@@ -104,7 +104,12 @@ SECTIONS
 
 	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
 	.rodata1   : { *(.rodata1) }
-	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
+	.sdata2   : {
+		PROVIDE(_SDA2_BASE_ = .);
+		*(.sdata2)
+		*(.sdata2.*)
+		*(.gnu.linkonce.s2.*)
+	}
 	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  */
@@ -185,6 +190,7 @@ SECTIONS
 
 	.sdata     :
 	{
+		PROVIDE(_SDA_BASE_ = .);
 		*(.sdata)
 		*(.sdata.*)
 		*(.gnu.linkonce.s.*)

dkppc/patches/binutils-2.22.patch

@@ -1,149 +0,0 @@
-diff -Nbaur binutils-2.22/bfd/bfd-in2.h binutils-2.22-ppc/bfd/bfd-in2.h
---- binutils-2.22/bfd/bfd-in2.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-ppc/bfd/bfd-in2.h	2012-04-03 15:06:10.000000000 +0100
-@@ -38,6 +38,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -308,8 +310,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/bfd-in.h binutils-2.22-ppc/bfd/bfd-in.h
---- binutils-2.22/bfd/bfd-in.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-ppc/bfd/bfd-in.h	2012-04-03 15:06:10.000000000 +0100
-@@ -31,6 +31,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -301,8 +303,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/config.in binutils-2.22-ppc/bfd/config.in
---- binutils-2.22/bfd/config.in	2011-05-12 08:41:40.000000000 +0100
-+++ binutils-2.22-ppc/bfd/config.in	2012-04-03 14:50:51.000000000 +0100
-@@ -245,6 +245,9 @@
- /* Define if <sys/procfs.h> has win32_pstatus_t. */
- #undef HAVE_WIN32_PSTATUS_T
- 
-+/* Define to 1 if you have the <windows.h> header file. */
-+#undef HAVE_WINDOWS_H
-+
- /* Define to 1 if you have the <zlib.h> header file. */
- #undef HAVE_ZLIB_H
- 
-diff -Nbaur binutils-2.22/bfd/configure binutils-2.22-ppc/bfd/configure
---- binutils-2.22/bfd/configure	2011-11-21 11:55:48.000000000 +0000
-+++ binutils-2.22-ppc/bfd/configure	2012-04-03 14:50:59.000000000 +0100
-@@ -13508,6 +13508,22 @@
- 
- fi
- 
-+
-+for ac_header in windows.h dlfcn.h
-+do :
-+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-+eval as_val=\$$as_ac_Header
-+   if test "x$as_val" = x""yes; then :
-+  cat >>confdefs.h <<_ACEOF
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
- $as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
- if test "${gcc_cv_header_string+set}" = set; then :
-diff -Nbaur binutils-2.22/bfd/configure.in binutils-2.22-ppc/bfd/configure.in
---- binutils-2.22/bfd/configure.in	2011-11-21 11:55:46.000000000 +0000
-+++ binutils-2.22-ppc/bfd/configure.in	2012-04-03 14:51:23.000000000 +0100
-@@ -190,6 +190,9 @@
- GCC_HEADER_STDINT(bfd_stdint.h)
- AC_HEADER_TIME
- AC_HEADER_DIRENT
-+
-+AC_CHECK_HEADERS(windows.h dlfcn.h)
-+
- ACX_HEADER_STRING
- AC_CHECK_FUNCS(fcntl getpagesize setitimer sysconf fdopen getuid getgid fileno)
- AC_CHECK_FUNCS(strtoull)
-diff -Nbaur binutils-2.22/bfd/plugin.c binutils-2.22-ppc/bfd/plugin.c
---- binutils-2.22/bfd/plugin.c	2011-07-11 16:03:07.000000000 +0100
-+++ binutils-2.22-ppc/bfd/plugin.c	2012-04-03 14:51:32.000000000 +0100
-@@ -25,7 +25,13 @@
- #if BFD_SUPPORTS_PLUGINS
- 
- #include <assert.h>
-+#ifdef HAVE_DLFCN_H
- #include <dlfcn.h>
-+#elif defined (HAVE_WINDOWS_H)
-+#include <windows.h>
-+#else
-+#error Unknown how to handle dynamic-load-libraries.
-+#endif
- #include <stdarg.h>
- #include "plugin-api.h"
- #include "sysdep.h"
-@@ -34,6 +40,37 @@
- #include "libiberty.h"
- #include <dirent.h>
- 
-+#if !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)
-+
-+#define RTLD_NOW 0      /* Dummy value.  */
-+
-+static void *
-+dlopen (const char *file, int mode ATTRIBUTE_UNUSED)
-+{
-+  return LoadLibrary (file);
-+}
-+
-+static void *
-+dlsym (void *handle, const char *name)
-+{
-+  return GetProcAddress (handle, name);
-+}
-+
-+static int ATTRIBUTE_UNUSED
-+dlclose (void *handle)
-+{
-+  FreeLibrary (handle);
-+  return 0;
-+}
-+
-+static const char *
-+dlerror (void)
-+{
-+  return "Unable to load DLL.";
-+}
-+
-+#endif /* !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)  */
-+
- #define bfd_plugin_close_and_cleanup                  _bfd_generic_close_and_cleanup
- #define bfd_plugin_bfd_free_cached_info               _bfd_generic_bfd_free_cached_info
- #define bfd_plugin_new_section_hook                   _bfd_generic_new_section_hook

dkppc/patches/binutils-2.32.patch

@@ -0,0 +1,12 @@
+diff -NBaur binutils-2.31.1/opcodes/ppc-opc.c binutils-2.31.1-ppc/opcodes/ppc-opc.c
+--- binutils-2.31.1/opcodes/ppc-opc.c	2018-06-24 19:38:58.000000000 +0100
++++ binutils-2.31.1-ppc/opcodes/ppc-opc.c	2018-11-01 10:59:42.814553627 +0000
+@@ -3501,7 +3501,7 @@
+ #define MFDEC2	(PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE \
+ 		 | PPC_OPCODE_TITAN)
+ #define BOOKE	PPC_OPCODE_BOOKE
+-#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS
++#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS
+ #define PPCE300 PPC_OPCODE_E300
+ #define PPCSPE	PPC_OPCODE_SPE
+ #define PPCSPE2 PPC_OPCODE_SPE2

dkppc/patches/binutils-2.34.patch

@@ -0,0 +1,12 @@
+diff -NBaur binutils-2.34/opcodes/ppc-opc.c binutils-2.34-ppc/opcodes/ppc-opc.c
+--- binutils-2.34/opcodes/ppc-opc.c	2020-01-18 13:55:49.000000000 +0000
++++ binutils-2.34-ppc/opcodes/ppc-opc.c	2020-05-22 10:47:37.900308413 +0000
+@@ -3747,7 +3747,7 @@
+ #define MFDEC2	(PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE \
+ 		 | PPC_OPCODE_TITAN)
+ #define BOOKE	PPC_OPCODE_BOOKE
+-#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS
++#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS
+ #define PPCE300 PPC_OPCODE_E300
+ #define PPCSPE	PPC_OPCODE_SPE
+ #define PPCSPE2 PPC_OPCODE_SPE2

dkppc/patches/gcc-10.2.0.patch

@@ -0,0 +1,904 @@
+diff --git a/config/gthr.m4 b/config/gthr.m4
+index 4b937306ad0..bfd0375bd60 100644
+--- a/config/gthr.m4
++++ b/config/gthr.m4
+@@ -13,6 +13,7 @@ AC_DEFUN([GCC_AC_THREAD_HEADER],
+ case $1 in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/gcc/config/i386/host-mingw32.c b/gcc/config/i386/host-mingw32.c
+index 250fef59b55..36b2239aa5d 100644
+--- a/gcc/config/i386/host-mingw32.c
++++ b/gcc/config/i386/host-mingw32.c
+@@ -44,9 +44,6 @@ static size_t mingw32_gt_pch_alloc_granularity (void);
+ 
+ static inline void w32_error(const char*, const char*, int, const char*);
+ 
+-/* FIXME: Is this big enough?  */
+-static const size_t pch_VA_max_size  = 128 * 1024 * 1024;
+-
+ /* Granularity for reserving address space.  */
+ static size_t va_granularity = 0x10000;
+ 
+@@ -88,9 +85,6 @@ static void *
+ mingw32_gt_pch_get_address (size_t size, int)
+ {
+   void* res;
+-  size = (size + va_granularity - 1) & ~(va_granularity - 1);
+-  if (size > pch_VA_max_size)
+-    return NULL;
+ 
+   /* FIXME: We let system determine base by setting first arg to NULL.
+      Allocating at top of available address space avoids unnecessary
+@@ -100,7 +94,7 @@ mingw32_gt_pch_get_address (size_t size, int)
+      If we allocate at bottom we need to reserve the address as early
+      as possible and at the same point in each invocation. */
+  
+-  res = VirtualAlloc (NULL, pch_VA_max_size,
++  res = VirtualAlloc (NULL, size,
+ 		      MEM_RESERVE | MEM_TOP_DOWN,
+ 		      PAGE_NOACCESS);
+   if (!res)
+@@ -150,7 +144,7 @@ mingw32_gt_pch_use_address (void *addr, size_t size, int fd,
+ 
+   /* Offset must be also be a multiple of allocation granularity for
+      this to work.  We can't change the offset. */ 
+-  if ((offset & (va_granularity - 1)) != 0 || size > pch_VA_max_size)
++  if ((offset & (va_granularity - 1)) != 0)
+     return -1;
+ 
+ 
+diff --git a/gcc/config/newlib-stdint.h b/gcc/config/newlib-stdint.h
+index 2e086f16de9..1c27c6467bc 100644
+--- a/gcc/config/newlib-stdint.h
++++ b/gcc/config/newlib-stdint.h
+@@ -25,7 +25,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ /* newlib uses 32-bit long in certain cases for all non-SPU
+    targets.  */
+ #ifndef STDINT_LONG32
+-#define STDINT_LONG32 (LONG_TYPE_SIZE == 32)
++#define STDINT_LONG32 0
+ #endif
+ 
+ #define SIG_ATOMIC_TYPE "int"
+diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
+index 132ca20fd7d..119ee5bbc8c 100644
+--- a/gcc/config/rs6000/rs6000.h
++++ b/gcc/config/rs6000/rs6000.h
+@@ -196,6 +196,7 @@ ASM_OPT_ANY
+ /* -mcpu=native handling only makes sense with compiler running on
+    an PowerPC chip.  If changing this condition, also change
+    the condition in driver-rs6000.c.  */
++#if 0
+ #if defined(__powerpc__) || defined(__POWERPC__) || defined(_AIX)
+ /* In driver-rs6000.c.  */
+ extern const char *host_detect_local_cpu (int argc, const char **argv);
+@@ -207,6 +208,8 @@ extern const char *host_detect_local_cpu (int argc, const char **argv);
+ #else
+ #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ #endif
++#endif
++#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ 
+ #ifndef CC1_CPU_SPEC
+ #ifdef HAVE_LOCAL_CPU_DETECT
+diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
+index 9ade72114e9..cede792d3a7 100644
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -590,7 +590,11 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Default starting address if specified.  */
+ #define LINK_START_SPEC "\
+-%{mads         : %(link_start_ads)         ; \
++%{mgcn|mogc    : %(link_start_ogc)         ; \
++  mvgc         : %(link_start_vgc)         ; \
++  mgcbios      : %(link_start_gcb)         ; \
++  mrvl         : %(link_start_rvl)         ; \
++  mads         : %(link_start_ads)         ; \
+   myellowknife : %(link_start_yellowknife) ; \
+   mmvme        : %(link_start_mvme)        ; \
+   msim         : %(link_start_sim)         ; \
+@@ -621,7 +625,8 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Any specific OS flags.  */
+ #define LINK_OS_SPEC "\
+-%{mads         : %(link_os_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
++  mads         : %(link_os_ads)         ; \
+   myellowknife : %(link_os_yellowknife) ; \
+   mmvme        : %(link_os_mvme)        ; \
+   msim         : %(link_os_sim)         ; \
+@@ -636,7 +641,10 @@ GNU_USER_TARGET_CC1_SPEC
+ /* Override rs6000.h definition.  */
+ #undef	CPP_SPEC
+ #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
+-%{mads         : %(cpp_os_ads)         ; \
++%{mgcn         : %(cpp_os_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
++  mrvl         : %(cpp_os_rvl)         ; \
++  mads         : %(cpp_os_ads)         ; \
+   myellowknife : %(cpp_os_yellowknife) ; \
+   mmvme        : %(cpp_os_mvme)        ; \
+   msim         : %(cpp_os_sim)         ; \
+@@ -650,7 +658,10 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ #undef	STARTFILE_SPEC
+ #define	STARTFILE_SPEC "\
+-%{mads         : %(startfile_ads)         ; \
++%{mgcn         : %(startfile_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
++  mrvl         : %(startfile_ogc)         ; \
++  mads         : %(startfile_ads)         ; \
+   myellowknife : %(startfile_yellowknife) ; \
+   mmvme        : %(startfile_mvme)        ; \
+   msim         : %(startfile_sim)         ; \
+@@ -664,7 +675,8 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ #undef	LIB_SPEC
+ #define	LIB_SPEC "\
+-%{mads         : %(lib_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
++  mads         : %(lib_ads)         ; \
+   myellowknife : %(lib_yellowknife) ; \
+   mmvme        : %(lib_mvme)        ; \
+   msim         : %(lib_sim)         ; \
+@@ -674,11 +686,12 @@ GNU_USER_TARGET_CC1_SPEC
+   mcall-openbsd: %(lib_openbsd)     ; \
+                : %(lib_default)     }"
+ 
+-#define LIB_DEFAULT_SPEC "-lc"
++#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #undef	ENDFILE_SPEC
+ #define	ENDFILE_SPEC "\
+-%{mads         : %(endfile_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
++  mads         : %(endfile_ads)         ; \
+   myellowknife : %(endfile_yellowknife) ; \
+   mmvme        : %(endfile_mvme)        ; \
+   msim         : %(endfile_sim)         ; \
+@@ -694,16 +707,27 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Motorola ADS support.  */
+ #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
++#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
++#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
+ 
+ #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
+ 
+ #define LINK_START_ADS_SPEC "-T ads.ld%s"
++#define LINK_START_OGC_SPEC "-T ogc.ld%s"
++#define LINK_START_RVL_SPEC "-T rvl.ld%s"
++#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
++#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
+ 
+ #define LINK_OS_ADS_SPEC ""
++#define LINK_OS_OGC_SPEC "--gc-sections"
+ 
+ #define CPP_OS_ADS_SPEC ""
++#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
++#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
++#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
+ 
+ /* Motorola Yellowknife support.  */
+ #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
+@@ -851,6 +875,7 @@ ncrtn.o%s"
+ #undef	SUBTARGET_EXTRA_SPECS
+ #define	SUBTARGET_EXTRA_SPECS						\
+   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
++  { "lib_ogc",			LIB_OGC_SPEC },				\
+   { "lib_ads",			LIB_ADS_SPEC },				\
+   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
+   { "lib_mvme",			LIB_MVME_SPEC },			\
+@@ -860,6 +885,7 @@ ncrtn.o%s"
+   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
+   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
+   { "lib_default",		LIB_DEFAULT_SPEC },			\
++  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
+   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
+   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
+   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
+@@ -869,6 +895,7 @@ ncrtn.o%s"
+   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
+   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
+   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
++  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
+   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
+   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
+   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
+@@ -880,7 +907,11 @@ ncrtn.o%s"
+   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
+   { "link_shlib",		LINK_SHLIB_SPEC },			\
+   { "link_start",		LINK_START_SPEC },			\
++  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
++  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
++  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
+   { "link_start_ads",		LINK_START_ADS_SPEC },			\
++  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
+   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
+   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
+   { "link_start_sim",		LINK_START_SIM_SPEC },			\
+@@ -890,6 +921,7 @@ ncrtn.o%s"
+   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
+   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
+   { "link_os",			LINK_OS_SPEC },				\
++  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
+   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
+   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
+   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
+@@ -901,6 +933,9 @@ ncrtn.o%s"
+   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
+   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
+   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
++  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
++  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
++  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
+   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
+   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
+   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
+diff --git a/gcc/config/rs6000/sysv4.opt b/gcc/config/rs6000/sysv4.opt
+index b49ba261f3c..4eda763dfca 100644
+--- a/gcc/config/rs6000/sysv4.opt
++++ b/gcc/config/rs6000/sysv4.opt
+@@ -124,6 +124,26 @@ mads
+ Target RejectNegative
+ Link with libads.a, libc.a and crt0.o.
+ 
++mgcn
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mogc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mgcbios
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mvgc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mrvl
++Target RejectNegative
++Link with libsysbase.a and libc.a, use rvl linker script 
++
+ myellowknife
+ Target RejectNegative
+ Link with libyk.a, libc.a and crt0.o.
+diff --git a/gcc/configure b/gcc/configure
+index eb6061c1631..4c6e993ca3a 100755
+--- a/gcc/configure
++++ b/gcc/configure
+@@ -12208,7 +12208,7 @@ case ${enable_threads} in
+     # default
+     target_thread_file='single'
+     ;;
+-  aix | dce | lynx | mipssde | posix | rtems | \
++  aix | dce | dkp | lynx | mipssde | posix | rtems | \
+   single | tpf | vxworks | win32)
+     target_thread_file=${enable_threads}
+     ;;
+diff --git a/gcc/configure.ac b/gcc/configure.ac
+index 715fcba0482..779743b69ee 100644
+--- a/gcc/configure.ac
++++ b/gcc/configure.ac
+@@ -1800,7 +1800,7 @@ case ${enable_threads} in
+     # default
+     target_thread_file='single'
+     ;;
+-  aix | dce | lynx | mipssde | posix | rtems | \
++  aix | dce | dkp | lynx | mipssde | posix | rtems | \
+   single | tpf | vxworks | win32)
+     target_thread_file=${enable_threads}
+     ;;
+diff --git a/libgcc/config/rs6000/crtrestvr.S b/libgcc/config/rs6000/crtrestvr.S
+index 260fe4d1af6..664808cd19c 100644
+--- a/libgcc/config/rs6000/crtrestvr.S
++++ b/libgcc/config/rs6000/crtrestvr.S
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -86,3 +86,4 @@ FUNC_END(_restvr_20)
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff --git a/libgcc/config/rs6000/crtsavevr.S b/libgcc/config/rs6000/crtsavevr.S
+index 7e1d5c5df98..2c62480d165 100644
+--- a/libgcc/config/rs6000/crtsavevr.S
++++ b/libgcc/config/rs6000/crtsavevr.S
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -86,3 +86,4 @@ FUNC_END(_savevr_20)
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff --git a/libgcc/config/rs6000/gthr-dkp.c b/libgcc/config/rs6000/gthr-dkp.c
+new file mode 100644
+index 00000000000..26180aa7f36
+--- /dev/null
++++ b/libgcc/config/rs6000/gthr-dkp.c
+@@ -0,0 +1,319 @@
++/* Threads compatibility routines for libgcc2 and libobjc.  */
++/* Compile this one with gcc.  */
++/* Copyright (C) 1997-2016 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++Under Section 7 of GPL version 3, you are granted additional
++permissions described in the GCC Runtime Library Exception, version
++3.1, as published by the Free Software Foundation.
++
++You should have received a copy of the GNU General Public License and
++a copy of the GCC Runtime Library Exception along with this program;
++see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++<http://www.gnu.org/licenses/>.  */
++
++#define _BUILDING_LIBGCC
++#include "gthr-dkp.h"
++#include <stddef.h>
++
++
++int
++__gthread_active_p (void)
++{
++  if (!__has_gthr_impl(active)) {
++    return 0;
++  }
++
++  return __gthr_impl_active();
++}
++
++int
++__gthread_create (__gthread_t *__threadid, void *(*__func) (void*),
++                  void *__args)
++{
++  if (!__has_gthr_impl(create)) {
++    return -1;
++  }
++
++  return __gthr_impl_create(__threadid, __func, __args);
++}
++
++int
++__gthread_join (__gthread_t __threadid, void **__value_ptr)
++{
++  if (!__has_gthr_impl(join)) {
++    return -1;
++  }
++
++  return __gthr_impl_join(__threadid, __value_ptr);
++}
++
++int
++__gthread_detach (__gthread_t __threadid)
++{
++  if (!__has_gthr_impl(detach)) {
++    return -1;
++  }
++
++  return __gthr_impl_detach(__threadid);
++}
++
++int
++__gthread_equal (__gthread_t __t1, __gthread_t __t2)
++{
++  if (!__has_gthr_impl(equal)) {
++    return -1;
++  }
++
++  return __gthr_impl_equal(__t1, __t2);
++}
++
++__gthread_t
++__gthread_self (void)
++{
++  if (!__has_gthr_impl(self)) {
++    __gthread_t result = { 0 };
++    return result;
++  }
++
++  return __gthr_impl_self();
++}
++
++int
++__gthread_yield (void)
++{
++  if (!__has_gthr_impl(yield)) {
++    return -1;
++  }
++
++  return __gthr_impl_yield();
++}
++
++int
++__gthread_once (__gthread_once_t *__once, void (*__func) (void))
++{
++  if (!__has_gthr_impl(once)) {
++    return -1;
++  }
++
++  return __gthr_impl_once(__once, __func);
++}
++
++int
++__gthread_key_create (__gthread_key_t *__key, void (*__dtor) (void *))
++{
++  if (!__has_gthr_impl(key_create)) {
++    return -1;
++  }
++
++  return __gthr_impl_key_create(__key, __dtor);
++}
++
++int
++__gthread_key_delete (__gthread_key_t __key)
++{
++  if (!__has_gthr_impl(key_delete)) {
++    return -1;
++  }
++
++  return __gthr_impl_key_delete(__key);
++}
++
++void *
++__gthread_getspecific (__gthread_key_t __key)
++{
++  if (!__has_gthr_impl(getspecific)) {
++    return NULL;
++  }
++
++  return __gthr_impl_getspecific(__key);
++}
++
++int
++__gthread_setspecific (__gthread_key_t __key, const void *__ptr)
++{
++  if (!__has_gthr_impl(setspecific)) {
++    return -1;
++  }
++
++  return __gthr_impl_setspecific(__key, __ptr);
++}
++
++void
++__gthread_mutex_init_function (__gthread_mutex_t *__mutex)
++{
++  if (__has_gthr_impl(mutex_init_function)) {
++    __gthr_impl_mutex_init_function(__mutex);
++  }
++}
++
++int
++__gthread_mutex_destroy (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_destroy(__mutex);
++}
++
++int
++__gthread_mutex_lock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_lock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_lock(__mutex);
++}
++
++int
++__gthread_mutex_trylock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_trylock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_trylock(__mutex);
++}
++
++int
++__gthread_mutex_unlock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_unlock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_unlock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_init_function (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_init_function)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_init_function(__mutex);
++}
++
++int
++__gthread_recursive_mutex_lock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_lock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_lock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_trylock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_trylock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_trylock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_unlock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_unlock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_unlock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_destroy (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_destroy(__mutex);
++}
++
++void
++__gthread_cond_init_function (__gthread_cond_t *__cond)
++{
++  if (__has_gthr_impl(cond_init_function)) {
++    __gthr_impl_cond_init_function(__cond);
++  }
++}
++
++int
++__gthread_cond_broadcast (__gthread_cond_t *__cond)
++{
++  if (!__has_gthr_impl(cond_broadcast)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_broadcast(__cond);
++}
++
++int
++__gthread_cond_signal (__gthread_cond_t *__cond)
++{
++  if (!__has_gthr_impl(cond_signal)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_signal(__cond);
++}
++
++int
++__gthread_cond_wait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(cond_wait)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_wait(__cond, __mutex);
++}
++
++int
++__gthread_cond_timedwait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                          const __gthread_time_t *__abs_timeout)
++{
++  if (!__has_gthr_impl(cond_timedwait)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_timedwait(__cond, __mutex, __abs_timeout);
++}
++
++int
++__gthread_cond_wait_recursive (__gthread_cond_t *__cond,
++                               __gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(cond_wait_recursive)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_wait_recursive(__cond, __mutex);
++}
++
++int
++__gthread_cond_destroy (__gthread_cond_t* __cond)
++{
++  if (!__has_gthr_impl(cond_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_destroy(__cond);
++}
+diff --git a/libgcc/config/rs6000/gthr-dkp.h b/libgcc/config/rs6000/gthr-dkp.h
+new file mode 100644
+index 00000000000..72ecf82ab83
+--- /dev/null
++++ b/libgcc/config/rs6000/gthr-dkp.h
+@@ -0,0 +1,187 @@
++/* Threads compatibility routines for libgcc2 and libobjc.  */
++/* Compile this one with gcc.  */
++/* Copyright (C) 1997-2016 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++Under Section 7 of GPL version 3, you are granted additional
++permissions described in the GCC Runtime Library Exception, version
++3.1, as published by the Free Software Foundation.
++
++You should have received a copy of the GNU General Public License and
++a copy of the GCC Runtime Library Exception along with this program;
++see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++<http://www.gnu.org/licenses/>.  */
++
++#ifndef _GLIBCXX_GCC_GTHR_DKP_H
++#define _GLIBCXX_GCC_GTHR_DKP_H
++
++#define __GTHREADS 1
++#define __GTHREADS_CXX0X 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef void *                      __gthread_t;
++typedef struct { int padding[7]; }  __gthread_cond_t;
++typedef struct { int padding; }     __gthread_key_t;
++typedef struct { int padding[11]; } __gthread_mutex_t;
++typedef struct { int padding; }     __gthread_once_t;
++typedef struct { int padding[11]; } __gthread_recursive_mutex_t;
++typedef struct timespec             __gthread_time_t;
++
++#define __GTHREAD_HAS_COND 1
++#define _GTHREAD_USE_MUTEX_TIMEDLOCK 0
++
++#define __GTHREAD_ONCE_INIT { 0 }
++#define __GTHREAD_TIME_INIT { 0, 0 }
++
++#define __GTHREAD_COND_INIT_FUNCTION __gthread_cond_init_function
++#define __GTHREAD_MUTEX_INIT_FUNCTION __gthread_mutex_init_function
++#define __GTHREAD_RECURSIVE_MUTEX_INIT_FUNCTION __gthread_recursive_mutex_init_function
++
++#ifdef _BUILDING_LIBGCC
++#define __GTHR_IMPL(_name) __attribute__((weak)) __gthr_impl_##_name
++#define __has_gthr_impl(_name) (&__gthr_impl_##_name)
++#else
++#define __GTHR_IMPL(_name) __gthr_impl_##_name
++#endif
++
++int __GTHR_IMPL(active) (void);
++int __GTHR_IMPL(create) (__gthread_t *__threadid, void *(*__func) (void*), void *__args);
++int __GTHR_IMPL(join) (__gthread_t __threadid, void **__value_ptr);
++int __GTHR_IMPL(detach) (__gthread_t __threadid);
++int __GTHR_IMPL(equal) (__gthread_t __t1, __gthread_t __t2);
++__gthread_t __GTHR_IMPL(self) (void);
++int __GTHR_IMPL(yield) (void);
++int __GTHR_IMPL(once) (__gthread_once_t *__once, void (*__func) (void));
++int __GTHR_IMPL(key_create) (__gthread_key_t *__key, void (*__dtor) (void *));
++int __GTHR_IMPL(key_delete) (__gthread_key_t __key);
++void * __GTHR_IMPL(getspecific) (__gthread_key_t __key);
++int __GTHR_IMPL(setspecific) (__gthread_key_t __key, const void *__ptr);
++void __GTHR_IMPL(mutex_init_function) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_destroy) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_lock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_trylock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_unlock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_init_function) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_lock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_trylock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_unlock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_destroy) (__gthread_recursive_mutex_t *__mutex);
++void __GTHR_IMPL(cond_init_function) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_broadcast) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_signal) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_wait) (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex);
++int __GTHR_IMPL(cond_timedwait) (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                         const __gthread_time_t *__abs_timeout);
++int __GTHR_IMPL(cond_wait_recursive) (__gthread_cond_t *__cond,
++                              __gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(cond_destroy) (__gthread_cond_t* __cond);
++
++int
++__gthread_active_p (void);
++
++int
++__gthread_create (__gthread_t *__threadid, void *(*__func) (void*),
++                  void *__args);
++
++int
++__gthread_join (__gthread_t __threadid, void **__value_ptr);
++
++int
++__gthread_detach (__gthread_t __threadid);
++
++int
++__gthread_equal (__gthread_t __t1, __gthread_t __t2);
++
++__gthread_t
++__gthread_self (void);
++
++int
++__gthread_yield (void);
++
++int
++__gthread_once (__gthread_once_t *__once, void (*__func) (void));
++
++int
++__gthread_key_create (__gthread_key_t *__key, void (*__dtor) (void *));
++
++int
++__gthread_key_delete (__gthread_key_t __key);
++
++void *
++__gthread_getspecific (__gthread_key_t __key);
++
++int
++__gthread_setspecific (__gthread_key_t __key, const void *__ptr);
++
++void
++__gthread_mutex_init_function (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_destroy (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_lock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_trylock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_unlock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_init_function (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_lock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_trylock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_unlock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_destroy (__gthread_recursive_mutex_t *__mutex);
++
++void
++__gthread_cond_init_function (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_broadcast (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_signal (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_wait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex);
++
++int
++__gthread_cond_timedwait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                          const __gthread_time_t *__abs_timeout);
++
++int
++__gthread_cond_wait_recursive (__gthread_cond_t *__cond,
++                               __gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_cond_destroy (__gthread_cond_t* __cond);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* ! _GLIBCXX_GCC_GTHR_DKP_H */
+diff --git a/libgcc/config/rs6000/t-ppccomm b/libgcc/config/rs6000/t-ppccomm
+index fb812d3801f..7f6669d530f 100644
+--- a/libgcc/config/rs6000/t-ppccomm
++++ b/libgcc/config/rs6000/t-ppccomm
+@@ -1,4 +1,5 @@
+ LIB2ADD += $(srcdir)/config/rs6000/ibm-ldouble.c \
++	   $(srcdir)/config/rs6000/gthr-dkp.c \
+ 	   $(srcdir)/config/rs6000/tramp.S
+ 
+ # This can't end up in shared libgcc
+diff --git a/libgcc/configure b/libgcc/configure
+index 26bf75789e0..1f663d2cfb0 100755
+--- a/libgcc/configure
++++ b/libgcc/configure
+@@ -5640,6 +5640,7 @@ tm_file="${tm_file_}"
+ case $target_thread_file in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index 3f769a1c660..e005d8304b7 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -325,7 +325,7 @@ register_tm_clones (void)
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance
+diff --git a/libstdc++-v3/configure b/libstdc++-v3/configure
+index 9f9c5a2419a..c9bb6c548be 100755
+--- a/libstdc++-v3/configure
++++ b/libstdc++-v3/configure
+@@ -15637,6 +15637,7 @@ $as_echo "$target_thread_file" >&6; }
+ case $target_thread_file in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;

dkppc/patches/gcc-4.6.3.patch

@@ -1,237 +0,0 @@
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/rs6000.h gcc-4.6.3-ppc/gcc/config/rs6000/rs6000.h
---- gcc-4.6.3/gcc/config/rs6000/rs6000.h	2011-07-27 19:17:15.000000000 +0100
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/rs6000.h	2012-04-21 22:54:04.000000000 +0100
-@@ -200,6 +200,7 @@
-   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
-   SUBTARGET_EXTRA_SPECS
- 
-+#if 0
- /* -mcpu=native handling only makes sense with compiler running on
-    an PowerPC chip.  If changing this condition, also change
-    the condition in driver-rs6000.c.  */
-@@ -214,6 +215,8 @@
- #else
- #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- #endif
-+#endif 
-+#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- 
- #ifndef CC1_CPU_SPEC
- #ifdef HAVE_LOCAL_CPU_DETECT
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.h
---- gcc-4.6.3/gcc/config/rs6000/sysv4.h	2011-03-07 07:50:23.000000000 +0000
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.h	2012-04-21 22:54:04.000000000 +0100
-@@ -603,7 +603,11 @@
- 
- /* Default starting address if specified.  */
- #define LINK_START_SPEC "\
--%{mads         : %(link_start_ads)         ; \
-+%{mgcn|mogc         : %(link_start_ogc)         ; \
-+  mvgc         : %(link_start_vgc)         ; \
-+  mgcbios         : %(link_start_gcb)         ; \
-+  mrvl         : %(link_start_rvl)         ; \
-+  mads         : %(link_start_ads)         ; \
-   myellowknife : %(link_start_yellowknife) ; \
-   mmvme        : %(link_start_mvme)        ; \
-   msim         : %(link_start_sim)         ; \
-@@ -641,7 +645,8 @@
- 
- /* Any specific OS flags.  */
- #define LINK_OS_SPEC "\
--%{mads         : %(link_os_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
-+  mads         : %(link_os_ads)         ; \
-   myellowknife : %(link_os_yellowknife) ; \
-   mmvme        : %(link_os_mvme)        ; \
-   msim         : %(link_os_sim)         ; \
-@@ -660,7 +665,10 @@
- /* Override rs6000.h definition.  */
- #undef	CPP_SPEC
- #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
--%{mads         : %(cpp_os_ads)         ; \
-+%{mgcn         : %(cpp_os_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
-+  mrvl         : %(cpp_os_rvl)         ; \
-+  mads         : %(cpp_os_ads)         ; \
-   myellowknife : %(cpp_os_yellowknife) ; \
-   mmvme        : %(cpp_os_mvme)        ; \
-   msim         : %(cpp_os_sim)         ; \
-@@ -675,7 +683,10 @@
- 
- #undef	STARTFILE_SPEC
- #define	STARTFILE_SPEC "\
--%{mads         : %(startfile_ads)         ; \
-+%{mgcn         : %(startfile_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
-+  mrvl         : %(startfile_ogc)         ; \
-+  mads         : %(startfile_ads)         ; \
-   myellowknife : %(startfile_yellowknife) ; \
-   mmvme        : %(startfile_mvme)        ; \
-   msim         : %(startfile_sim)         ; \
-@@ -686,11 +697,12 @@
-   mcall-openbsd: %(startfile_openbsd)     ; \
-                : %(startfile_default)     }"
- 
--#define	STARTFILE_DEFAULT_SPEC "ecrti.o%s crtbegin.o%s"
-+#define	STARTFILE_DEFAULT_SPEC "crt0.o%s ecrti.o%s crtbegin.o%s"
- 
- #undef	LIB_SPEC
- #define	LIB_SPEC "\
--%{mads         : %(lib_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
-+  mads         : %(lib_ads)         ; \
-   myellowknife : %(lib_yellowknife) ; \
-   mmvme        : %(lib_mvme)        ; \
-   msim         : %(lib_sim)         ; \
-@@ -701,11 +713,12 @@
-   mcall-openbsd: %(lib_openbsd)     ; \
-                : %(lib_default)     }"
- 
--#define LIB_DEFAULT_SPEC "-lc"
-+#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #undef	ENDFILE_SPEC
- #define	ENDFILE_SPEC "\
--%{mads         : %(endfile_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
-+  mads         : %(endfile_ads)         ; \
-   myellowknife : %(endfile_yellowknife) ; \
-   mmvme        : %(endfile_mvme)        ; \
-   msim         : %(endfile_sim)         ; \
-@@ -722,16 +735,27 @@
- 
- /* Motorola ADS support.  */
- #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
-+#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
-+#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
- 
- #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
- 
- #define LINK_START_ADS_SPEC "-T ads.ld%s"
-+#define LINK_START_OGC_SPEC "-T ogc.ld%s"
-+#define LINK_START_RVL_SPEC "-T rvl.ld%s"
-+#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
-+#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
- 
- #define LINK_OS_ADS_SPEC ""
-+#define LINK_OS_OGC_SPEC "--gc-sections"
- 
- #define CPP_OS_ADS_SPEC ""
-+#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
-+#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
-+#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
- 
- /* Motorola Yellowknife support.  */
- #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -926,6 +950,7 @@
- #undef	SUBTARGET_EXTRA_SPECS
- #define	SUBTARGET_EXTRA_SPECS						\
-   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
-+  { "lib_ogc",			LIB_OGC_SPEC },				\
-   { "lib_ads",			LIB_ADS_SPEC },				\
-   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
-   { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -936,6 +961,7 @@
-   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
-   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
-   { "lib_default",		LIB_DEFAULT_SPEC },			\
-+  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
-   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
-   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
-   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -946,6 +972,7 @@
-   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
-   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
-   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
-+  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
-   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
-   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
-   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -959,7 +986,11 @@
-   { "link_shlib",		LINK_SHLIB_SPEC },			\
-   { "link_target",		LINK_TARGET_SPEC },			\
-   { "link_start",		LINK_START_SPEC },			\
-+  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
-+  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
-+  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
-   { "link_start_ads",		LINK_START_ADS_SPEC },			\
-+  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
-   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
-   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
-   { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -970,6 +1001,7 @@
-   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
-   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
-   { "link_os",			LINK_OS_SPEC },				\
-+  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
-   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
-   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
-   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -984,6 +1016,9 @@
-   { "cc1_endian_little",	CC1_ENDIAN_LITTLE_SPEC },		\
-   { "cc1_endian_default",	CC1_ENDIAN_DEFAULT_SPEC },		\
-   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
-+  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
-+  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
-+  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
-   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
-   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
-   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.opt gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-4.6.3/gcc/config/rs6000/sysv4.opt	2011-01-03 20:52:22.000000000 +0000
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.opt	2012-04-21 22:54:04.000000000 +0100
-@@ -108,6 +108,26 @@
- Target RejectNegative
- Link with libads.a, libc.a and crt0.o
- 
-+mgcn
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mogc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mgcbios
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mvgc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mrvl
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use rvl linker script 
-+
- myellowknife
- Target RejectNegative
- Link with libyk.a, libc.a and crt0.o
-diff -Nbaur gcc-4.6.3/gcc/config.gcc gcc-4.6.3-ppc/gcc/config.gcc
---- gcc-4.6.3/gcc/config.gcc	2011-07-22 17:44:50.000000000 +0100
-+++ gcc-4.6.3-ppc/gcc/config.gcc	2012-04-21 22:54:04.000000000 +0100
-@@ -2133,7 +2133,7 @@
- 	use_gcc_stdint=wrap
- 	;;
- powerpc-*-eabi*)
--	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
-+	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
- 	extra_options="${extra_options} rs6000/sysv4.opt"
- 	tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
- 	use_gcc_stdint=wrap
-diff -Nbaur gcc-4.6.3/libcpp/Makefile.in gcc-4.6.3-ppc/libcpp/Makefile.in
---- gcc-4.6.3/libcpp/Makefile.in	2012-03-01 12:03:46.000000000 +0000
-+++ gcc-4.6.3-ppc/libcpp/Makefile.in	2012-04-21 22:54:04.000000000 +0100
-@@ -212,8 +212,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)

dkppc/patches/gdb-7.4.patch

@@ -1,30 +0,0 @@
-diff -Nbaur gdb-7.4/gdb/Makefile.in gdb-7.4-ppc/gdb/Makefile.in
---- gdb-7.4/gdb/Makefile.in	2012-01-06 04:43:01.000000000 +0000
-+++ gdb-7.4-ppc/gdb/Makefile.in	2012-01-28 15:56:00.000000000 +0000
-@@ -2195,10 +2195,10 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+#@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+#@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+#@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+#@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.4/sim/ppc/Makefile.in gdb-7.4-ppc/sim/ppc/Makefile.in
---- gdb-7.4/sim/ppc/Makefile.in	2009-09-16 00:26:44.000000000 +0100
-+++ gdb-7.4-ppc/sim/ppc/Makefile.in	2012-02-25 13:30:02.000000000 +0000
-@@ -551,7 +551,7 @@
- PACKAGE_OBJ = @sim_pk_obj@
- 
- 
--psim: $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(LIBS) $(LIBINTL_DEP)
-+psim: $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(LIBINTL_DEP)
- 	$(CC) $(CFLAGS) $(SIM_CFLAGS) $(LDFLAGS) -o psim$(EXEEXT) main.o $(TARGETLIB) $(BFD_LIB) $(LIBINTL) $(LIBIBERTY_LIB) $(LIBS)
- 
- run: psim

dkppc/patches/gdb-8.2.1.patch

@@ -0,0 +1,60 @@
+diff -NBaur gdb-8.2.1/gdb/dtrace-probe.c gdb-8.2.1-apple/gdb/dtrace-probe.c
+--- gdb-8.2.1/gdb/dtrace-probe.c	2018-12-23 05:51:54.000000000 +0000
++++ gdb-8.2.1-apple/gdb/dtrace-probe.c	2019-02-19 17:30:16.449175937 +0000
+@@ -100,7 +100,7 @@
+ 
+ /* DTrace static_probe_ops.  */
+ 
+-const dtrace_static_probe_ops dtrace_static_probe_ops;
++const dtrace_static_probe_ops dtrace_static_probe_ops = {};
+ 
+ /* The following structure represents a dtrace probe.  */
+ 
+diff -NBaur gdb-8.2.1/gdb/probe.c gdb-8.2.1-apple/gdb/probe.c
+--- gdb-8.2.1/gdb/probe.c	2018-12-23 05:51:54.000000000 +0000
++++ gdb-8.2.1-apple/gdb/probe.c	2019-02-19 17:31:05.266578008 +0000
+@@ -60,7 +60,7 @@
+ 
+ /* Static operations associated with a generic probe.  */
+ 
+-const any_static_probe_ops any_static_probe_ops;
++const any_static_probe_ops any_static_probe_ops = {};
+ 
+ /* A helper for parse_probes that decodes a probe specification in
+    SEARCH_PSPACE.  It appends matching SALs to RESULT.  */
+diff -NBaur gdb-8.2.1/gdb/record-btrace.c gdb-8.2.1-apple/gdb/record-btrace.c
+--- gdb-8.2.1/gdb/record-btrace.c	2018-12-23 05:51:54.000000000 +0000
++++ gdb-8.2.1-apple/gdb/record-btrace.c	2019-02-19 17:31:33.301731324 +0000
+@@ -144,7 +144,7 @@
+ 
+ /* Token associated with a new-thread observer enabling branch tracing
+    for the new thread.  */
+-static const gdb::observers::token record_btrace_thread_observer_token;
++static const gdb::observers::token record_btrace_thread_observer_token = {};
+ 
+ /* Memory access types used in set/show record btrace replay-memory-access.  */
+ static const char replay_memory_access_read_only[] = "read-only";
+diff -NBaur gdb-8.2.1/gdb/stap-probe.c gdb-8.2.1-apple/gdb/stap-probe.c
+--- gdb-8.2.1/gdb/stap-probe.c	2018-12-23 05:51:54.000000000 +0000
++++ gdb-8.2.1-apple/gdb/stap-probe.c	2019-02-19 17:29:35.744567941 +0000
+@@ -119,7 +119,7 @@
+ 
+ /* SystemTap static_probe_ops.  */
+ 
+-const stap_static_probe_ops stap_static_probe_ops;
++const stap_static_probe_ops stap_static_probe_ops = {};
+ 
+ class stap_probe : public probe
+ {
+diff -NBaur gdb-8.2.1/gdb/tui/tui-hooks.c gdb-8.2.1-apple/gdb/tui/tui-hooks.c
+--- gdb-8.2.1/gdb/tui/tui-hooks.c	2018-12-23 05:51:54.000000000 +0000
++++ gdb-8.2.1-apple/gdb/tui/tui-hooks.c	2019-02-19 17:28:53.178460364 +0000
+@@ -205,7 +205,7 @@
+ 
+ /* Token associated with observers registered while TUI hooks are
+    installed.  */
+-static const gdb::observers::token tui_observers_token;
++static const gdb::observers::token tui_observers_token = {};
+ 
+ /* Attach or detach a single observer, according to ATTACH.  */
+ 

dkppc/rules/base_rules

@@ -1,79 +0,0 @@
-#---------------------------------------------------------------------------------
-# change shell on Snow Leopard
-#---------------------------------------------------------------------------------
-UNAME_S	:=	$(shell uname -s)
-UNAME_R	:=	$(shell uname -r)
-
-ifneq (,$(findstring Darwin,$(UNAME_S)))
-	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
-		export SHELL=/bin/bash
-	endif
-endif
-
-#---------------------------------------------------------------------------------
-# path to tools 
-#---------------------------------------------------------------------------------
-export PORTLIBS	:=	$(DEVKITPRO)/portlibs/ppc
-export PATH	:=	$(DEVKITPPC)/bin:$(PORTLIBS)/bin:$(PATH)
-
-#---------------------------------------------------------------------------------
-# the prefix on the compiler executables
-#---------------------------------------------------------------------------------
-PREFIX	:=	powerpc-eabi-
-
-export AS	:=	$(PREFIX)as
-export CC	:=	$(PREFIX)gcc
-export CXX	:=	$(PREFIX)g++
-export AR	:=	$(PREFIX)ar
-export OBJCOPY	:=	$(PREFIX)objcopy
-
-
-ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
-
-ifneq (,$(ISVC))
-	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
-endif
-
-#---------------------------------------------------------------------------------
-%.a:
-#---------------------------------------------------------------------------------
-	@echo $(notdir $@)
-	@rm -f $@
-	@$(AR) -rc $@ $^
-
-#---------------------------------------------------------------------------------
-%.o: %.cpp
-	@echo $(notdir $<)
-	@$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
-	
-#---------------------------------------------------------------------------------
-%.o: %.c
-	@echo $(notdir $<)
-	@$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.m
-	@echo $(notdir $<)
-	@$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(OBJCFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.s
-	@echo $(notdir $<)
-	@$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.S
-	@echo $(notdir $<)
-	@$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-# canned command sequence for binary data
-#---------------------------------------------------------------------------------
-define bin2o
-	bin2s -a 32 $< | $(AS) -o $(@)
-	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo $(<F) | tr . _)`.h
-	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo $(<F) | tr . _)`.h
-	echo "extern const u32" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo $(<F) | tr . _)`.h
-endef
-
-

dkppc/rules/gamecube_rules

@@ -1,25 +0,0 @@
-ifeq ($(strip $(DEVKITPPC)),)
-$(error "Please set DEVKITPPC in your environment. export DEVKITPPC=<path to>devkitPro/devkitPPC)
-endif
-
-export	LIBOGC_INC	:=	$(DEVKITPRO)/libogc/include
-export	LIBOGC_LIB	:=	$(DEVKITPRO)/libogc/lib/cube
-
-include $(DEVKITPPC)/base_rules
-
-MACHDEP =  -DGEKKO -mogc -mcpu=750 -meabi -mhard-float
-
-#---------------------------------------------------------------------------------
-%.dol: %.elf
-	@echo output ... $(notdir $@)
-	@elf2dol $< $@
-
-#---------------------------------------------------------------------------------
-%.tpl : %.scf
-	@echo $(notdir $<)
-	@gxtexconv -s $< -d $(DEPSDIR)/$*.d -o $@
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking ... $(notdir $@)
-	@$(LD)  $^ $(LDFLAGS) $(LIBPATHS) $(LIBS) -o $@

dkppc/rules/wii_rules

@@ -1,25 +0,0 @@
-ifeq ($(strip $(DEVKITPPC)),)
-$(error "Please set DEVKITPPC in your environment. export DEVKITPPC=<path to>devkitPro/devkitPPC)
-endif
-
-export	LIBOGC_INC	:=	$(DEVKITPRO)/libogc/include
-export	LIBOGC_LIB	:=	$(DEVKITPRO)/libogc/lib/wii
-
-MACHDEP =  -DGEKKO -mrvl -mcpu=750 -meabi -mhard-float
-
-include $(DEVKITPPC)/base_rules
-
-#---------------------------------------------------------------------------------
-%.dol: %.elf
-	@echo output ... $(notdir $@)
-	@elf2dol $< $@
-
-#---------------------------------------------------------------------------------
-%.tpl : %.scf
-	@echo $(notdir $<)
-	@gxtexconv -s $< -d $(DEPSDIR)/$*.d -o $@
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking ... $(notdir $@)
-	@$(LD)  $^ $(LDFLAGS) $(LIBPATHS) $(LIBS) -o $@

dkppc/scripts/build-crtls.sh

@@ -1,32 +1,16 @@
-#!/bin/bash
+#!/bin/sh
 
-export DEVKITPPC=$TOOLPATH/devkitPPC
+#---------------------------------------------------------------------------------
+# set env variables
+#---------------------------------------------------------------------------------
 export DEVKITPRO=$TOOLPATH
+export DEVKITPPC=$DEVKITPRO/devkitPPC
 
 #---------------------------------------------------------------------------------
-# Install and build the gamecube crt and libogc
+# Install the rules files
 #---------------------------------------------------------------------------------
+cd $BUILDDIR
 
-echo "installing linkscripts ..."
+tar -xvf $SRCDIR/devkitppc-rules-$DKPPC_RULES_VER.tar.gz
-cp $BUILDSCRIPTDIR/dkppc/crtls/*.ld $prefix/$target/lib/
+cd devkitppc-rules-$DKPPC_RULES_VER
-#---------------------------------------------------------------------------------
+make install
-# copy base rulesets
-#---------------------------------------------------------------------------------
-cp $BUILDSCRIPTDIR/dkppc/rules/* $prefix
-
-cd $BUILDDIR/libogc-$LIBOGC_VER
-
-if [ ! -f installed ]; then
-	echo "Building & installing libogc"
-	$MAKE install || { echo "libogc install failed"; exit 1; }
-	touch installed
-fi
-
-cd $BUILDDIR/libfat-$LIBFAT_VER
-
-if [ ! -f installed ]; then
-	echo "Building & installing libfat"
-	$MAKE ogc-install || { echo "libfat install failed"; exit 1; }
-	touch installed
-fi
-

dkppc/scripts/build-gcc.sh

@@ -16,7 +16,7 @@ then
 	--prefix=$prefix --target=$target --disable-nls --disable-shared --disable-debug \
 	--disable-werror \
 	--enable-poison-system-directories \
-	--enable-plugins --enable-lto --disable-dependency-tracking \
+	--enable-plugins --enable-lto \
 	--disable-werror $CROSS_PARAMS \
 	|| { echo "Error configuing ppc binutils"; exit 1; }
 	touch configured-binutils
@@ -40,14 +40,17 @@ cd $BUILDDIR
 # build and install mn10200 binutils
 #---------------------------------------------------------------------------------
 
+# Use modern config.sub for aarch64 host
+cp binutils-$BINUTILS_VER/config.sub binutils-$MN_BINUTILS_VER/config.sub
+
 mkdir -p mn10200/binutils
 cd mn10200/binutils
 
 if [ ! -f configured-binutils ]
 then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$MN_BINUTILS_VER/configure \
 	--prefix=$prefix --target=mn10200 --disable-nls --disable-debug \
-	--disable-dependency-tracking \
+	--disable-multilib \
 	--disable-werror $CROSS_PARAMS \
 	|| { echo "Error configuing mn10200 binutils"; exit 1; }
 	touch configured-binutils
@@ -75,20 +78,32 @@ cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
+	CFLAGS="$cflags" \
-	--enable-languages=c,c++,objc \
+	CXXFLAGS="$cflags" \
-	--enable-lto $plugin_ld \
+	LDFLAGS="$ldflags" \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	LDFLAGS_FOR_TARGET="" \
+	../../gcc-$GCC_VER/configure \
+	--enable-languages=c,c++,objc,lto \
+	--enable-lto \
 	--with-cpu=750 \
-	--disable-nls --disable-shared --enable-threads --disable-multilib \
+	--disable-nls --disable-shared --enable-threads=dkp --disable-multilib \
 	--disable-win32-registry \
 	--disable-libstdcxx-pch \
+	--disable-libstdcxx-verbose \
+	--enable-libstdcxx-time=yes \
+	--enable-libstdcxx-filesystem-ts \
+	--enable-cxx-flags='-ffunction-sections -fdata-sections' \
 	--target=$target \
 	--with-newlib \
 	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 	--prefix=$prefix\
-	--disable-dependency-tracking \
+	--with-system-zlib\
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 26" \
+	--with-bugurl="https://github.com/devkitpro/buildscripts/issues" --with-pkgversion="devkitPPC release 38" \
 	$CROSS_PARAMS \
+	$CROSS_GCC_PARAMS \
+        CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	|| { echo "Error configuring gcc stage 1"; exit 1; }
 	touch configured-gcc
 fi
@@ -115,13 +130,18 @@ cd $target/newlib
 unset CFLAGS
 unset LDFLAGS
 
+OLD_CC=$CC
+OLD_CXX=$CXX
+unset CC
+unset CXX
+
 if [ ! -f configured-newlib ]
 then
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	../../newlib-$NEWLIB_VER/configure \
 	--target=$target \
 	--prefix=$prefix \
 	--enable-newlib-mb \
-	--enable-newlib-hw-fp \
 	|| { echo "Error configuring newlib"; exit 1; }
 	touch configured-newlib
 fi
@@ -133,10 +153,13 @@ then
 fi
 if [ ! -f installed-newlib ]
 then
-	$MAKE install || { echo "Error installing newlib"; exit 1; }
+	$MAKE install -j1 || { echo "Error installing newlib"; exit 1; }
 	touch installed-newlib
 fi
 
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
 #---------------------------------------------------------------------------------
 # build and install the final compiler
 #---------------------------------------------------------------------------------
@@ -159,31 +182,11 @@ fi
 
 rm -fr $prefix/$target/sys-include
 
+#---------------------------------------------------------------------------------
+# Install and build the gamecube crt and libogc
+#---------------------------------------------------------------------------------
+
+echo "installing linkscripts ..."
+cp $BUILDSCRIPTDIR/dkppc/crtls/*.ld $prefix/$target/lib/
+
 cd $BUILDDIR
-
-#---------------------------------------------------------------------------------
-# build and install the debugger
-#---------------------------------------------------------------------------------
-mkdir -p $target/gdb
-cd $target/gdb
-
-if [ ! -f configured-gdb ]
-then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" ../../gdb-$GDB_VER/configure \
-	--disable-nls --prefix=$prefix --target=$target --disable-werror --disable-dependency-tracking\
-	$CROSS_PARAMS || { echo "Error configuring gdb"; exit 1; }
-	touch configured-gdb
-fi
-
-if [ ! -f built-gdb ]
-then
-	$MAKE || { echo "Error building gdb"; exit 1; }
-	touch built-gdb
-fi
-
-if [ ! -f installed-gdb ]
-then
-	$MAKE install || { echo "Error installing gdb"; exit 1; }
-	touch installed-gdb
-fi
-

dkppc/scripts/build-tools.sh

@@ -1,20 +0,0 @@
-#!/bin/bash
-cd $BUILDDIR
-
-for archive in $hostarchives
-do
-	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
-	cd $BUILDDIR/$dir
-	if [ ! -f configured ]; then
-		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$prefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
-		touch configured
-	fi
-	if [ ! -f built ]; then
-		$MAKE || { echo "error building $archive"; exit 1; }
-		touch built
-	fi
-	if [ ! -f installed ]; then
-		$MAKE install || { echo "error installing $archive"; exit 1; }
-		touch installed
-	fi
-done

dkpsp/patches/gcc-4.6.3.patch

@@ -1,843 +0,0 @@
-diff -Nbaur gcc-4.6.3/config.sub gcc-4.6.3-psp/config.sub
---- gcc-4.6.3/config.sub	2010-05-25 14:22:07.000000000 +0100
-+++ gcc-4.6.3-psp/config.sub	2012-04-04 22:37:30.000000000 +0100
-@@ -279,6 +279,7 @@
- 	| mipsisa64sb1 | mipsisa64sb1el \
- 	| mipsisa64sr71k | mipsisa64sr71kel \
- 	| mipstx39 | mipstx39el \
-+	| mipsallegrex | mipsallegrexel \
- 	| mn10200 | mn10300 \
- 	| moxie \
- 	| mt \
-@@ -375,6 +376,7 @@
- 	| mipsisa64sb1-* | mipsisa64sb1el-* \
- 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
- 	| mipstx39-* | mipstx39el-* \
-+	| mipsallegrex-* | mipsallegrexel-* \
- 	| mmix-* \
- 	| mt-* \
- 	| msp430-* \
-@@ -771,6 +773,10 @@
- 		basic_machine=m68k-atari
- 		os=-mint
- 		;;
-+	psp)
-+		basic_machine=mipsallegrexel-psp
-+		os=-elf
-+		;;
- 	mips3*-*)
- 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- 		;;
-diff -Nbaur gcc-4.6.3/gcc/config/mips/allegrex.md gcc-4.6.3-psp/gcc/config/mips/allegrex.md
---- gcc-4.6.3/gcc/config/mips/allegrex.md	1970-01-01 01:00:00.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config/mips/allegrex.md	2012-04-04 22:37:30.000000000 +0100
-@@ -0,0 +1,191 @@
-+;; Sony ALLEGREX instructions.
-+;; Copyright (C) 2005 Free Software Foundation, Inc.
-+;;
-+;; This file is part of GCC.
-+;;
-+;; GCC is free software; you can redistribute it and/or modify
-+;; it under the terms of the GNU General Public License as published by
-+;; the Free Software Foundation; either version 2, or (at your option)
-+;; any later version.
-+;;
-+;; GCC is distributed in the hope that it will be useful,
-+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+;; GNU General Public License for more details.
-+;;
-+;; You should have received a copy of the GNU General Public License
-+;; along with GCC; see the file COPYING.  If not, write to
-+;; the Free Software Foundation, 59 Temple Place - Suite 330,
-+;; Boston, MA 02111-1307, USA.
-+
-+(define_c_enum "unspec" [
-+  UNSPEC_WSBH
-+  UNSPEC_CLO
-+  UNSPEC_CTO
-+  UNSPEC_CACHE
-+  UNSPEC_CEIL_W_S
-+  UNSPEC_FLOOR_W_S
-+  UNSPEC_ROUND_W_S
-+])
-+
-+;; Multiply Add and Subtract.
-+;; Note: removed clobbering for madd and msub (testing needed)
-+
-+(define_insn "allegrex_madd"
-+  [(set (match_operand:SI 0 "register_operand" "+l")
-+       (plus:SI (mult:SI (match_operand:SI 1 "register_operand" "d")
-+             (match_operand:SI 2 "register_operand" "d"))
-+        (match_dup 0)))]
-+  "TARGET_ALLEGREX"
-+  "madd\t%1,%2"
-+  [(set_attr "type"    "imadd")
-+   (set_attr "mode"    "SI")])
-+
-+(define_insn "allegrex_msub"
-+  [(set (match_operand:SI 0 "register_operand" "+l")
-+       (minus:SI (match_dup 0)
-+         (mult:SI (match_operand:SI 1 "register_operand" "d")
-+              (match_operand:SI 2 "register_operand" "d"))))]
-+  "TARGET_ALLEGREX"
-+  "msub\t%1,%2"
-+  [(set_attr "type"    "imadd")
-+   (set_attr "mode"    "SI")])
-+
-+
-+;; Min and max.
-+
-+(define_insn "sminsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+        (smin:SI (match_operand:SI 1 "register_operand" "d")
-+                 (match_operand:SI 2 "register_operand" "d")))]
-+  "TARGET_ALLEGREX"
-+  "min\t%0,%1,%2"
-+  [(set_attr "type"    "arith")
-+   (set_attr "mode"    "SI")])
-+
-+(define_insn "smaxsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+        (smax:SI (match_operand:SI 1 "register_operand" "d")
-+                 (match_operand:SI 2 "register_operand" "d")))]
-+  "TARGET_ALLEGREX"
-+  "max\t%0,%1,%2"
-+  [(set_attr "type"    "arith")
-+   (set_attr "mode"    "SI")])
-+
-+
-+;; Extended shift instructions.
-+
-+(define_insn "allegrex_bitrev"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+   (unspec:SI [(match_operand:SI 1 "register_operand" "d")]
-+          UNSPEC_BITREV))]
-+  "TARGET_ALLEGREX"
-+  "bitrev\t%0,%1"
-+  [(set_attr "type"    "arith")
-+   (set_attr "mode"    "SI")])
-+
-+(define_insn "allegrex_wsbh"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+   (unspec:SI [(match_operand:SI 1 "register_operand" "d")]
-+          UNSPEC_WSBH))]
-+  "TARGET_ALLEGREX"
-+  "wsbh\t%0,%1"
-+  [(set_attr "type"    "arith")
-+   (set_attr "mode"    "SI")])
-+
-+(define_insn "bswapsi2"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+   (bswap:SI (match_operand:SI 1 "register_operand" "d")))]
-+  "TARGET_ALLEGREX"
-+  "wsbw\t%0,%1"
-+  [(set_attr "type"    "shift")
-+   (set_attr "mode"    "SI")])
-+
-+
-+;; Count leading ones, count trailing zeros, and count trailing ones (clz is
-+;; already defined).
-+
-+(define_insn "allegrex_clo"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+       (unspec:SI [(match_operand:SI 1 "register_operand" "d")]
-+          UNSPEC_CLO))]
-+  "TARGET_ALLEGREX"
-+  "clo\t%0,%1"
-+  [(set_attr "type"    "clz")
-+   (set_attr "mode"    "SI")])
-+
-+(define_expand "ctzsi2"
-+  [(set (match_operand:SI 0 "register_operand")
-+       (ctz:SI (match_operand:SI 1 "register_operand")))]
-+  "TARGET_ALLEGREX"
-+{
-+  rtx r1;
-+
-+  r1 = gen_reg_rtx (SImode);
-+  emit_insn (gen_allegrex_bitrev (r1, operands[1]));
-+  emit_insn (gen_clzsi2 (operands[0], r1));
-+  DONE;
-+})
-+
-+(define_expand "allegrex_cto"
-+  [(set (match_operand:SI 0 "register_operand")
-+       (unspec:SI [(match_operand:SI 1 "register_operand")]
-+          UNSPEC_CTO))]
-+  "TARGET_ALLEGREX"
-+{
-+  rtx r1;
-+
-+  r1 = gen_reg_rtx (SImode);
-+  emit_insn (gen_allegrex_bitrev (r1, operands[1]));
-+  emit_insn (gen_allegrex_clo (operands[0], r1));
-+  DONE;
-+})
-+
-+
-+;; Misc.
-+
-+(define_insn "allegrex_sync"
-+  [(unspec_volatile [(const_int 0)] UNSPEC_SYNC)]
-+  "TARGET_ALLEGREX"
-+  "sync"
-+  [(set_attr "type"    "unknown")
-+   (set_attr "mode"    "none")])
-+
-+(define_insn "allegrex_cache"
-+  [(unspec_volatile [(match_operand:SI 0 "const_int_operand" "")
-+            (match_operand:SI 1 "register_operand" "d")]
-+           UNSPEC_CACHE)]
-+  "TARGET_ALLEGREX"
-+  "cache\t%0,0(%1)"
-+  [(set_attr "type"    "unknown")
-+   (set_attr "mode"    "none")])
-+
-+
-+;; Floating-point builtins.
-+
-+(define_insn "allegrex_ceil_w_s"
-+  [(set (match_operand:SI 0 "register_operand" "=f")
-+       (unspec:SI [(match_operand:SF 1 "register_operand" "f")]
-+          UNSPEC_CEIL_W_S))]
-+  "TARGET_ALLEGREX"
-+  "ceil.w.s\t%0,%1"
-+  [(set_attr "type"    "fcvt")
-+   (set_attr "mode"    "SF")])
-+
-+(define_insn "allegrex_floor_w_s"
-+  [(set (match_operand:SI 0 "register_operand" "=f")
-+       (unspec:SI [(match_operand:SF 1 "register_operand" "f")]
-+          UNSPEC_FLOOR_W_S))]
-+  "TARGET_ALLEGREX"
-+  "floor.w.s\t%0,%1"
-+  [(set_attr "type"    "fcvt")
-+   (set_attr "mode"    "SF")])
-+
-+(define_insn "allegrex_round_w_s"
-+  [(set (match_operand:SI 0 "register_operand" "=f")
-+       (unspec:SI [(match_operand:SF 1 "register_operand" "f")]
-+          UNSPEC_ROUND_W_S))]
-+  "TARGET_ALLEGREX"
-+  "round.w.s\t%0,%1"
-+  [(set_attr "type"    "fcvt")
-+   (set_attr "mode"    "SF")])
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips-ftypes.def gcc-4.6.3-psp/gcc/config/mips/mips-ftypes.def
---- gcc-4.6.3/gcc/config/mips/mips-ftypes.def	2009-02-20 15:20:38.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/config/mips/mips-ftypes.def	2012-04-04 22:37:31.000000000 +0100
-@@ -53,9 +53,12 @@
- 
- DEF_MIPS_FTYPE (2, (SI, DI, SI))
- DEF_MIPS_FTYPE (2, (SI, POINTER, SI))
-+DEF_MIPS_FTYPE (1, (SI, HI))
-+DEF_MIPS_FTYPE (1, (SI, SF))
- DEF_MIPS_FTYPE (1, (SI, SI))
- DEF_MIPS_FTYPE (2, (SI, SI, SI))
- DEF_MIPS_FTYPE (3, (SI, SI, SI, SI))
-+DEF_MIPS_FTYPE (1, (SI, QI))
- DEF_MIPS_FTYPE (1, (SI, V2HI))
- DEF_MIPS_FTYPE (2, (SI, V2HI, V2HI))
- DEF_MIPS_FTYPE (1, (SI, V4QI))
-@@ -124,3 +127,4 @@
- DEF_MIPS_FTYPE (2, (VOID, SI, SI))
- DEF_MIPS_FTYPE (2, (VOID, V2HI, V2HI))
- DEF_MIPS_FTYPE (2, (VOID, V4QI, V4QI))
-+DEF_MIPS_FTYPE (1, (VOID, VOID))
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips.c gcc-4.6.3-psp/gcc/config/mips/mips.c
---- gcc-4.6.3/gcc/config/mips/mips.c	2011-05-29 18:48:14.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config/mips/mips.c	2012-04-04 22:37:31.000000000 +0100
-@@ -239,7 +239,12 @@
-   MIPS_BUILTIN_CMP_SINGLE,
- 
-   /* For generating bposge32 branch instructions in MIPS32 DSP ASE.  */
--  MIPS_BUILTIN_BPOSGE32
-+  MIPS_BUILTIN_BPOSGE32,
-+
-+  /* The builtin corresponds to the ALLEGREX cache instruction.  Operand 0
-+     is the function code (must be less than 32) and operand 1 is the base
-+     address.  */
-+  MIPS_BUILTIN_CACHE
- };
- 
- /* Invoke MACRO (COND) for each C.cond.fmt condition.  */
-@@ -516,6 +521,10 @@
-    normal branch.  */
- static bool mips_branch_likely;
- 
-+/* Preferred stack boundary for proper stack vars alignment */
-+unsigned int mips_preferred_stack_boundary;
-+unsigned int mips_preferred_stack_align;
-+
- /* The current instruction-set architecture.  */
- enum processor mips_arch;
- const struct mips_cpu_info *mips_arch_info;
-@@ -691,6 +700,7 @@
- 
-   /* MIPS II processors.  */
-   { "r6000", PROCESSOR_R6000, 2, 0 },
-+  { "allegrex", PROCESSOR_ALLEGREX, 2, 0 },
- 
-   /* MIPS III processors.  */
-   { "r4000", PROCESSOR_R4000, 3, 0 },
-@@ -969,6 +979,9 @@
- 		     1,           /* branch_cost */
- 		     4            /* memory_latency */
-   },
-+  { /* Allegrex */
-+    DEFAULT_COSTS
-+  },
-   { /* Loongson-2E */
-     DEFAULT_COSTS
-   },
-@@ -12605,6 +12618,7 @@
- AVAIL_NON_MIPS16 (dspr2_32, !TARGET_64BIT && TARGET_DSPR2)
- AVAIL_NON_MIPS16 (loongson, TARGET_LOONGSON_VECTORS)
- AVAIL_NON_MIPS16 (cache, TARGET_CACHE_BUILTIN)
-+AVAIL_NON_MIPS16 (allegrex, TARGET_ALLEGREX)
- 
- /* Construct a mips_builtin_description from the given arguments.
- 
-@@ -12701,6 +12715,30 @@
-   MIPS_BUILTIN (bposge, f, "bposge" #VALUE,				\
- 		MIPS_BUILTIN_BPOSGE ## VALUE, MIPS_SI_FTYPE_VOID, AVAIL)
- 
-+/* Define a MIPS_BUILTIN_DIRECT function for instruction CODE_FOR_allegrex_<INSN>.
-+   FUNCTION_TYPE and TARGET_FLAGS are builtin_description fields.  */
-+#define DIRECT_ALLEGREX_BUILTIN(INSN, FUNCTION_TYPE, TARGET_FLAGS) \
-+  { CODE_FOR_allegrex_ ## INSN, MIPS_FP_COND_f, "__builtin_allegrex_" #INSN,        \
-+    MIPS_BUILTIN_DIRECT, FUNCTION_TYPE, mips_builtin_avail_allegrex }
-+
-+/* Same as the above, but mapped to an instruction that doesn't share the
-+   NAME.  NAME is the name of the builtin without the builtin prefix.  */
-+#define DIRECT_ALLEGREX_NAMED_BUILTIN(NAME, INSN, FUNCTION_TYPE, TARGET_FLAGS) \
-+  { CODE_FOR_ ## INSN, MIPS_FP_COND_f, "__builtin_allegrex_" #NAME,             \
-+    MIPS_BUILTIN_DIRECT, FUNCTION_TYPE, mips_builtin_avail_allegrex }
-+
-+/* Define a MIPS_BUILTIN_DIRECT_NO_TARGET function for instruction
-+   CODE_FOR_allegrex_<INSN>.  FUNCTION_TYPE and TARGET_FLAGS are
-+   builtin_description fields.  */
-+#define DIRECT_ALLEGREX_NO_TARGET_BUILTIN(INSN, FUNCTION_TYPE, TARGET_FLAGS)   \
-+  { CODE_FOR_allegrex_ ## INSN, MIPS_FP_COND_f, "__builtin_allegrex_" #INSN,            \
-+    MIPS_BUILTIN_DIRECT_NO_TARGET, FUNCTION_TYPE, mips_builtin_avail_allegrex }
-+
-+/* Define a builtin with a specific function TYPE.  */
-+#define SPECIAL_ALLEGREX_BUILTIN(TYPE, INSN, FUNCTION_TYPE, TARGET_FLAGS)  \
-+  { CODE_FOR_allegrex_ ## INSN, MIPS_FP_COND_f, "__builtin_allegrex_" #INSN,            \
-+    MIPS_BUILTIN_ ## TYPE, FUNCTION_TYPE, mips_builtin_avail_allegrex }
-+
- /* Define a Loongson MIPS_BUILTIN_DIRECT function __builtin_loongson_<FN_NAME>
-    for instruction CODE_FOR_loongson_<INSN>.  FUNCTION_TYPE is a
-    builtin_description field.  */
-@@ -12945,6 +12983,40 @@
-   DIRECT_BUILTIN (dpsqx_s_w_ph, MIPS_DI_FTYPE_DI_V2HI_V2HI, dspr2_32),
-   DIRECT_BUILTIN (dpsqx_sa_w_ph, MIPS_DI_FTYPE_DI_V2HI_V2HI, dspr2_32),
- 
-+/* Builtin functions for the Sony ALLEGREX processor.
-+
-+   These have the `__builtin_allegrex_' prefix instead of `__builtin_mips_'
-+   to maintain compatibility with Sony's ALLEGREX GCC port.
-+
-+   Some of the builtins may seem redundant, but they are the same as the
-+   builtins defined in the Sony compiler.  I chose to map redundant and
-+   trivial builtins to the original instruction instead of creating
-+   duplicate patterns specifically for the ALLEGREX (as Sony does).  */
-+
-+  DIRECT_ALLEGREX_BUILTIN(bitrev, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_BUILTIN(wsbh, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(wsbw, bswapsi2, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(clz, clzsi2, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_BUILTIN(clo, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(ctz, ctzsi2, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_BUILTIN(cto, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(rotr, rotrsi3, MIPS_SI_FTYPE_SI_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(rotl, rotlsi3, MIPS_SI_FTYPE_SI_SI, 0),
-+
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(seb, extendqisi2, MIPS_SI_FTYPE_QI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(seh, extendhisi2, MIPS_SI_FTYPE_HI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(max, smaxsi3, MIPS_SI_FTYPE_SI_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(min, sminsi3, MIPS_SI_FTYPE_SI_SI, 0),
-+
-+  DIRECT_ALLEGREX_NO_TARGET_BUILTIN(sync, MIPS_VOID_FTYPE_VOID, 0),
-+  SPECIAL_ALLEGREX_BUILTIN(CACHE, cache, MIPS_VOID_FTYPE_SI_SI, 0),
-+
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(sqrt_s, sqrtsf2, MIPS_SF_FTYPE_SF, 0),
-+  DIRECT_ALLEGREX_BUILTIN(ceil_w_s, MIPS_SI_FTYPE_SF, 0),
-+  DIRECT_ALLEGREX_BUILTIN(floor_w_s, MIPS_SI_FTYPE_SF, 0),
-+  DIRECT_ALLEGREX_BUILTIN(round_w_s, MIPS_SI_FTYPE_SF, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(trunc_w_s, fix_truncsfsi2_insn, MIPS_SI_FTYPE_SF, 0),
-+
-   /* Builtin functions for ST Microelectronics Loongson-2E/2F cores.  */
-   LOONGSON_BUILTIN (packsswh, MIPS_V4HI_FTYPE_V2SI_V2SI),
-   LOONGSON_BUILTIN (packsshb, MIPS_V8QI_FTYPE_V4HI_V4HI),
-@@ -13096,6 +13168,8 @@
- /* Standard mode-based argument types.  */
- #define MIPS_ATYPE_UQI unsigned_intQI_type_node
- #define MIPS_ATYPE_SI intSI_type_node
-+#define MIPS_ATYPE_HI intHI_type_node
-+#define MIPS_ATYPE_QI intQI_type_node
- #define MIPS_ATYPE_USI unsigned_intSI_type_node
- #define MIPS_ATYPE_DI intDI_type_node
- #define MIPS_ATYPE_UDI unsigned_intDI_type_node
-@@ -13270,6 +13344,9 @@
- 
-   switch (opno)
-     {
-+    case 0:
-+      emit_insn (GEN_FCN (icode) (0));
-+      break;
-     case 2:
-       emit_insn (GEN_FCN (icode) (ops[0], ops[1]));
-       break;
-@@ -13439,6 +13516,28 @@
- 				       const1_rtx, const0_rtx);
- }
- 
-+/* Expand a __builtin_allegrex_cache() function.  Make sure the passed
-+   cache function code is less than 32.  */
-+
-+static rtx
-+mips_expand_builtin_cache (enum insn_code icode, rtx target, tree exp)
-+{
-+  rtx op0, op1;
-+
-+  op0 = mips_prepare_builtin_arg (icode, 0, exp, 0);
-+  op1 = mips_prepare_builtin_arg (icode, 1, exp, 1);
-+
-+  if (GET_CODE (op0) == CONST_INT)
-+    if (INTVAL (op0) < 0 || INTVAL (op0) > 0x1f)
-+      {
-+   error ("invalid function code '%d'", INTVAL (op0));
-+   return const0_rtx;
-+      }
-+
-+  emit_insn (GEN_FCN (icode) (op0, op1));
-+  return target;
-+}
-+
- /* Implement TARGET_EXPAND_BUILTIN.  */
- 
- static rtx
-@@ -13484,6 +13583,9 @@
- 
-     case MIPS_BUILTIN_BPOSGE32:
-       return mips_expand_builtin_bposge (d->builtin_type, target);
-+
-+    case MIPS_BUILTIN_CACHE:
-+      return mips_expand_builtin_cache (d->icode, target, exp);
-     }
-   gcc_unreachable ();
- }
-@@ -15918,6 +16020,22 @@
-      Do all CPP-sensitive stuff in non-MIPS16 mode; we'll switch to
-      MIPS16 mode afterwards if need be.  */
-   mips_set_mips16_mode (false);
-+
-+  /* Validate -mpreferred-stack-boundary= value, or provide default.
-+     The default of 128-bit is for newABI else 64-bit.  */
-+  mips_preferred_stack_boundary = (TARGET_NEWABI ? 128 : 64);
-+  mips_preferred_stack_align = (TARGET_NEWABI ? 16 : 8);
-+  if (mips_preferred_stack_boundary_string)
-+    {
-+      i = atoi (mips_preferred_stack_boundary_string);
-+      if (i < 2 || i > 12)
-+       error ("-mpreferred-stack-boundary=%d is not between 2 and 12", i);
-+      else
-+        {
-+          mips_preferred_stack_align = (1 << i);
-+          mips_preferred_stack_boundary = mips_preferred_stack_align * 8;
-+        }
-+    }
- }
- 
- /* Implement TARGET_OPTION_OPTIMIZATION_TABLE.  */
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips.h gcc-4.6.3-psp/gcc/config/mips/mips.h
---- gcc-4.6.3/gcc/config/mips/mips.h	2011-03-08 20:51:11.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/config/mips/mips.h	2012-04-04 22:37:31.000000000 +0100
-@@ -231,6 +231,7 @@
- #define TARGET_SB1                  (mips_arch == PROCESSOR_SB1		\
- 				     || mips_arch == PROCESSOR_SB1A)
- #define TARGET_SR71K                (mips_arch == PROCESSOR_SR71000)
-+#define TARGET_ALLEGREX             (mips_arch == PROCESSOR_ALLEGREX)
- 
- /* Scheduling target defines.  */
- #define TUNE_20KC		    (mips_tune == PROCESSOR_20KC)
-@@ -258,6 +259,7 @@
- #define TUNE_OCTEON		    (mips_tune == PROCESSOR_OCTEON)
- #define TUNE_SB1                    (mips_tune == PROCESSOR_SB1		\
- 				     || mips_tune == PROCESSOR_SB1A)
-+#define TUNE_ALLEGREX               (mips_tune == PROCESSOR_ALLEGREX)
- 
- /* Whether vector modes and intrinsics for ST Microelectronics
-    Loongson-2E/2F processors should be enabled.  In o32 pairs of
-@@ -852,6 +854,9 @@
- /* ISA has LDC1 and SDC1.  */
- #define ISA_HAS_LDC1_SDC1	(!ISA_MIPS1 && !TARGET_MIPS16)
- 
-+/* ISA has just the integer condition move instructions (movn,movz) */
-+#define ISA_HAS_INT_CONDMOVE   (TARGET_ALLEGREX)
-+
- /* ISA has the mips4 FP condition code instructions: FP-compare to CC,
-    branch on CC, and move (both FP and non-FP) on CC.  */
- #define ISA_HAS_8CC		(ISA_MIPS4				\
-@@ -874,6 +879,7 @@
- 
- /* ISA has conditional trap instructions.  */
- #define ISA_HAS_COND_TRAP	(!ISA_MIPS1				\
-+				 && !TARGET_ALLEGREX				\
- 				 && !TARGET_MIPS16)
- 
- /* ISA has integer multiply-accumulate instructions, madd and msub.  */
-@@ -910,6 +916,7 @@
- /* ISA has count leading zeroes/ones instruction (not implemented).  */
- #define ISA_HAS_CLZ_CLO		((ISA_MIPS32				\
- 				  || ISA_MIPS32R2			\
-+				  || TARGET_ALLEGREX		\
- 				  || ISA_MIPS64				\
- 				  || ISA_MIPS64R2)			\
- 				 && !TARGET_MIPS16)
-@@ -955,6 +962,7 @@
- 				  || TARGET_MIPS5400			\
- 				  || TARGET_MIPS5500			\
- 				  || TARGET_SR71K			\
-+				  || TARGET_ALLEGREX			\
- 				  || TARGET_SMARTMIPS)			\
- 				 && !TARGET_MIPS16)
- 
-@@ -984,11 +992,13 @@
- 
- /* ISA includes the MIPS32r2 seb and seh instructions.  */
- #define ISA_HAS_SEB_SEH		((ISA_MIPS32R2		\
-+				  || TARGET_ALLEGREX	\
- 				  || ISA_MIPS64R2)	\
- 				 && !TARGET_MIPS16)
- 
- /* ISA includes the MIPS32/64 rev 2 ext and ins instructions.  */
- #define ISA_HAS_EXT_INS		((ISA_MIPS32R2		\
-+				  || TARGET_ALLEGREX	\
- 				  || ISA_MIPS64R2)	\
- 				 && !TARGET_MIPS16)
- 
-@@ -1038,7 +1048,8 @@
- 				 || ISA_MIPS64				\
- 				 || ISA_MIPS64R2			\
- 				 || TARGET_MIPS5500			\
--				 || TARGET_LOONGSON_2EF)
-+				 || TARGET_LOONGSON_2EF		\
-+				 || TARGET_ALLEGREX)
- 
- /* ISA includes synci, jr.hb and jalr.hb.  */
- #define ISA_HAS_SYNCI ((ISA_MIPS32R2		\
-@@ -2133,7 +2144,7 @@
-    `crtl->outgoing_args_size'.  */
- #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1
- 
--#define STACK_BOUNDARY (TARGET_NEWABI ? 128 : 64)
-+#define STACK_BOUNDARY (mips_preferred_stack_boundary)
- 
- /* Symbolic macros for the registers used to return integer and floating
-    point values.  */
-@@ -2259,7 +2270,7 @@
- /* Treat LOC as a byte offset from the stack pointer and round it up
-    to the next fully-aligned offset.  */
- #define MIPS_STACK_ALIGN(LOC) \
--  (TARGET_NEWABI ? ((LOC) + 15) & -16 : ((LOC) + 7) & -8)
-+  (((LOC) + (mips_preferred_stack_align - 1)) & -(mips_preferred_stack_align))
- 
- 
- /* Output assembler code to FILE to increment profiler label # LABELNO
-@@ -2911,6 +2922,9 @@
- #endif
- #endif
- 
-+extern unsigned int mips_preferred_stack_boundary;
-+extern unsigned int mips_preferred_stack_align;
-+
- #ifndef HAVE_AS_TLS
- #define HAVE_AS_TLS 0
- #endif
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips.md gcc-4.6.3-psp/gcc/config/mips/mips.md
---- gcc-4.6.3/gcc/config/mips/mips.md	2012-01-09 22:09:53.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/config/mips/mips.md	2012-04-04 22:37:31.000000000 +0100
-@@ -37,6 +37,7 @@
-   74kf2_1
-   74kf1_1
-   74kf3_2
-+  allegrex
-   loongson_2e
-   loongson_2f
-   loongson_3a
-@@ -598,7 +599,7 @@
- ;; This mode iterator allows :MOVECC to be used anywhere that a
- ;; conditional-move-type condition is needed.
- (define_mode_iterator MOVECC [SI (DI "TARGET_64BIT")
--                              (CC "TARGET_HARD_FLOAT && !TARGET_LOONGSON_2EF")])
-+                              (CC "TARGET_HARD_FLOAT && !TARGET_LOONGSON_2EF && !TARGET_ALLEGREX")])
- 
- ;; 32-bit integer moves for which we provide move patterns.
- (define_mode_iterator IMOVE32
-@@ -1885,11 +1886,11 @@
- 	   (mult:DI
- 	      (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
- 	      (any_extend:DI (match_operand:SI 2 "register_operand" "d")))))]
--  "!TARGET_64BIT && (ISA_HAS_MSAC || GENERATE_MADD_MSUB || ISA_HAS_DSP)"
-+  "!TARGET_64BIT && (ISA_HAS_MSAC || GENERATE_MADD_MSUB || ISA_HAS_DSP || TARGET_ALLEGREX)"
- {
-   if (ISA_HAS_DSP_MULT)
-     return "msub<u>\t%q0,%1,%2";
--  else if (TARGET_MIPS5500 || GENERATE_MADD_MSUB)
-+  else if (TARGET_MIPS5500 || GENERATE_MADD_MSUB || TARGET_ALLEGREX)
-     return "msub<u>\t%1,%2";
-   else
-     return "msac<u>\t$0,%1,%2";
-@@ -2066,14 +2067,14 @@
- 	 (mult:DI (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
- 		  (any_extend:DI (match_operand:SI 2 "register_operand" "d")))
- 	 (match_operand:DI 3 "register_operand" "0")))]
--  "(TARGET_MAD || ISA_HAS_MACC || GENERATE_MADD_MSUB || ISA_HAS_DSP)
-+  "(TARGET_MAD || ISA_HAS_MACC || GENERATE_MADD_MSUB || ISA_HAS_DSP || TARGET_ALLEGREX)
-    && !TARGET_64BIT"
- {
-   if (TARGET_MAD)
-     return "mad<u>\t%1,%2";
-   else if (ISA_HAS_DSP_MULT)
-     return "madd<u>\t%q0,%1,%2";
--  else if (GENERATE_MADD_MSUB || TARGET_MIPS5500)
-+  else if (GENERATE_MADD_MSUB || TARGET_MIPS5500 || TARGET_ALLEGREX)
-     return "madd<u>\t%1,%2";
-   else
-     /* See comment in *macc.  */
-@@ -2500,6 +2501,33 @@
- ;;
- ;;  ....................
- ;;
-+;; FIND FIRST BIT INSTRUCTION
-+;;
-+;;  ....................
-+;;
-+
-+(define_expand "ffs<mode>2"
-+  [(set (match_operand:GPR 0 "register_operand" "")
-+   (ffs:GPR (match_operand:GPR 1 "register_operand" "")))]
-+  "ISA_HAS_CLZ_CLO"
-+{
-+  rtx r1, r2, r3, r4;
-+  
-+  r1 = gen_reg_rtx (<MODE>mode);
-+  r2 = gen_reg_rtx (<MODE>mode);
-+  r3 = gen_reg_rtx (<MODE>mode);
-+  r4 = gen_reg_rtx (<MODE>mode);
-+  emit_insn (gen_neg<mode>2 (r1, operands[1]));
-+  emit_insn (gen_and<mode>3 (r2, operands[1], r1));
-+  emit_insn (gen_clz<mode>2 (r3, r2));
-+  emit_move_insn (r4, GEN_INT (GET_MODE_BITSIZE (<MODE>mode)));
-+  emit_insn (gen_sub<mode>3 (operands[0], r4, r3));
-+  DONE;
-+})
-+
-+;;
-+;;  ....................
-+;;
- ;;	NEGATION and ONE'S COMPLEMENT
- ;;
- ;;  ....................
-@@ -2550,6 +2578,25 @@
-   [(set_attr "alu_type" "not")
-    (set_attr "mode" "<MODE>")])
- 
-+(define_expand "rotl<mode>3"
-+  [(set (match_operand:GPR 0 "register_operand")
-+       (rotate:GPR (match_operand:GPR 1 "register_operand")
-+           (match_operand:SI 2 "arith_operand")))]
-+  "ISA_HAS_ROR"
-+{
-+  rtx temp;
-+
-+  if (GET_CODE (operands[2]) == CONST_INT)
-+    temp = GEN_INT (GET_MODE_BITSIZE (<MODE>mode) - INTVAL (operands[2]));
-+  else
-+    {
-+      temp = gen_reg_rtx (<MODE>mode);
-+      emit_insn (gen_neg<mode>2 (temp, operands[2]));
-+    }
-+  emit_insn (gen_rotr<mode>3 (operands[0], operands[1], temp));
-+  DONE;
-+})
-+
- ;;
- ;;  ....................
- ;;
-@@ -6301,7 +6348,7 @@
- 		 (const_int 0)])
- 	 (match_operand:GPR 2 "reg_or_0_operand" "dJ,0")
- 	 (match_operand:GPR 3 "reg_or_0_operand" "0,dJ")))]
--  "ISA_HAS_CONDMOVE"
-+  "ISA_HAS_CONDMOVE || ISA_HAS_INT_CONDMOVE"
-   "@
-     mov%T4\t%0,%z2,%1
-     mov%t4\t%0,%z3,%1"
-@@ -6331,8 +6378,12 @@
- 	(if_then_else:GPR (match_dup 5)
- 			  (match_operand:GPR 2 "reg_or_0_operand")
- 			  (match_operand:GPR 3 "reg_or_0_operand")))]
--  "ISA_HAS_CONDMOVE"
-+  "ISA_HAS_CONDMOVE || ISA_HAS_INT_CONDMOVE"
- {
-+  if (ISA_HAS_INT_CONDMOVE
-+      && GET_MODE_CLASS (GET_MODE (operands[0])) == MODE_FLOAT)
-+    FAIL;
-+
-   mips_expand_conditional_move (operands);
-   DONE;
- })
-@@ -6481,6 +6532,9 @@
- ; ST-Microelectronics Loongson-2E/2F-specific patterns.
- (include "loongson.md")
- 
-+; Sony ALLEGREX instructions.
-+(include "allegrex.md")
-+
- (define_c_enum "unspec" [
-   UNSPEC_ADDRESS_FIRST
- ])
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips.opt gcc-4.6.3-psp/gcc/config/mips/mips.opt
---- gcc-4.6.3/gcc/config/mips/mips.opt	2011-02-17 01:59:04.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/config/mips/mips.opt	2012-04-04 22:37:31.000000000 +0100
-@@ -306,5 +306,9 @@
- Target Report Var(TARGET_XGOT)
- Lift restrictions on GOT size
- 
-+mpreferred-stack-boundary=
-+Target RejectNegative Joined Var(mips_preferred_stack_boundary_string)
-+Attempt to keep stack aligned to this power of 2
-+
- noasmopt
- Driver
-diff -Nbaur gcc-4.6.3/gcc/config/mips/psp.h gcc-4.6.3-psp/gcc/config/mips/psp.h
---- gcc-4.6.3/gcc/config/mips/psp.h	1970-01-01 01:00:00.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config/mips/psp.h	2012-04-04 22:37:31.000000000 +0100
-@@ -0,0 +1,31 @@
-+/* Support for Sony's Playstation Portable (PSP).
-+   Copyright (C) 2005 Free Software Foundation, Inc.
-+   Contributed by Marcus R. Brown <mrbrown@ocgnet.org>
-+
-+This file is part of GCC.
-+
-+GCC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GCC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GCC; see the file COPYING.  If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA.  */
-+
-+/* Override the startfile spec to include crt0.o. */
-+#undef STARTFILE_SPEC
-+#define STARTFILE_SPEC "crt0%O%s crti%O%s crtbegin%O%s"
-+
-+#undef SUBTARGET_CPP_SPEC
-+#define SUBTARGET_CPP_SPEC "-DPSP=1 -D__psp__=1 -D_PSP=1"
-+
-+/* Get rid of the .pdr section. */
-+#undef SUBTARGET_ASM_SPEC
-+#define SUBTARGET_ASM_SPEC "-mno-pdr"
-diff -Nbaur gcc-4.6.3/gcc/config/mips/t-allegrex gcc-4.6.3-psp/gcc/config/mips/t-allegrex
---- gcc-4.6.3/gcc/config/mips/t-allegrex	1970-01-01 01:00:00.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config/mips/t-allegrex	2012-04-04 22:37:31.000000000 +0100
-@@ -0,0 +1,29 @@
-+# Suppress building libgcc1.a, since the MIPS compiler port is complete
-+# and does not need anything from libgcc1.a.
-+LIBGCC1 =
-+CROSS_LIBGCC1 =
-+
-+EXTRA_MULTILIB_PARTS = crtbegin.o crtend.o crti.o crtn.o
-+# Don't let CTOR_LIST end up in sdata section.
-+CRTSTUFF_T_CFLAGS = -G 0
-+
-+# Assemble startup files.
-+$(T)crti.o: $(srcdir)/config/mips/crti.asm $(GCC_PASSES)
-+	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(MULTILIB_CFLAGS) $(INCLUDES) \
-+	-c -o $(T)crti.o -x assembler-with-cpp $(srcdir)/config/mips/crti.asm
-+
-+$(T)crtn.o: $(srcdir)/config/mips/crtn.asm $(GCC_PASSES)
-+	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(MULTILIB_CFLAGS) $(INCLUDES) \
-+	-c -o $(T)crtn.o -x assembler-with-cpp $(srcdir)/config/mips/crtn.asm
-+
-+# We must build libgcc2.a with -G 0, in case the user wants to link
-+# without the $gp register.
-+TARGET_LIBGCC2_CFLAGS = -G 0
-+
-+# Build the libraries for both hard and soft floating point
-+
-+MULTILIB_OPTIONS = 
-+MULTILIB_DIRNAMES = 
-+
-+LIBGCC = stmp-multilib
-+INSTALL_LIBGCC = install-multilib
-diff -Nbaur gcc-4.6.3/gcc/config.gcc gcc-4.6.3-psp/gcc/config.gcc
---- gcc-4.6.3/gcc/config.gcc	2011-07-22 17:44:50.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config.gcc	2012-04-04 22:37:31.000000000 +0100
-@@ -2033,6 +2033,18 @@
- 	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
- 	tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
- 	;;
-+mipsallegrex-*-elf* | mipsallegrexel-*-elf*)
-+   tm_file="elfos.h ${tm_file} mips/elf.h"
-+   tmake_file=mips/t-allegrex
-+   target_cpu_default="MASK_SINGLE_FLOAT|MASK_DIVIDE_BREAKS"
-+   tm_defines="MIPS_ISA_DEFAULT=2 MIPS_CPU_STRING_DEFAULT=\\\"allegrex\\\" MIPS_ABI_DEFAULT=ABI_EABI"
-+   case ${target} in
-+   mipsallegrex*-psp-elf*) 
-+       tm_file="${tm_file} mips/psp.h"
-+       ;;
-+   esac
-+   use_fixproto=yes
-+   ;;
- mmix-knuth-mmixware)
- 	tm_file="${tm_file} newlib-stdint.h"
- 	need_64bit_hwint=yes
-diff -Nbaur gcc-4.6.3/gcc/crtstuff.c gcc-4.6.3-psp/gcc/crtstuff.c
---- gcc-4.6.3/gcc/crtstuff.c	2010-12-23 12:08:21.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/crtstuff.c	2012-04-04 22:37:31.000000000 +0100
-@@ -48,7 +48,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
--
-+#define USED_FOR_TARGET
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
-diff -Nbaur gcc-4.6.3/libcpp/Makefile.in gcc-4.6.3-psp/libcpp/Makefile.in
---- gcc-4.6.3/libcpp/Makefile.in	2012-03-01 12:03:46.000000000 +0000
-+++ gcc-4.6.3-psp/libcpp/Makefile.in	2012-04-05 09:32:31.000000000 +0100
-@@ -212,8 +212,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
-+POSTCOMPILE =
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -Nbaur gcc-4.6.3/libgcc/config.host gcc-4.6.3-psp/libgcc/config.host
---- gcc-4.6.3/libgcc/config.host	2011-11-23 22:15:54.000000000 +0000
-+++ gcc-4.6.3-psp/libgcc/config.host	2012-04-04 22:37:31.000000000 +0100
-@@ -436,6 +436,8 @@
- 	;;
- mipstx39-*-elf* | mipstx39el-*-elf*)
- 	;;
-+mips*-psp-elf*)
-+	;;
- mmix-knuth-mmixware)
- 	extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- 	tmake_file="${tmake_file} ${cpu_type}/t-${cpu_type}"

dkpsp/scripts/build-gcc.sh

@@ -1,201 +0,0 @@
-#!/bin/sh
-
-#---------------------------------------------------------------------------------
-# build and install binutils
-#---------------------------------------------------------------------------------
-
-mkdir -p $target/binutils
-cd $target/binutils
-
-if [ ! -f configured-binutils ]
-then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
-	--prefix=$prefix --target=$target --disable-nls --disable-debug \
-	--enable-lto --enable-plugins \
-	--enable-poison-system-directories \
-	--disable-dependency-tracking  --disable-werror \
-	$CROSS_PARAMS \
-	|| { echo "Error configuring binutils"; exit 1; }
-	touch configured-binutils
-fi
-
-if [ ! -f built-binutils ]
-then
-	$MAKE || { echo "Error building binutils"; exit 1; }
-	touch built-binutils
-fi
-
-
-if [ ! -f installed-binutils ]
-then
-	$MAKE install || { echo "Error installing binutils"; exit 1; }
-	touch installed-binutils
-fi
-cd $BUILDDIR
-
-#---------------------------------------------------------------------------------
-# build and install just the c compiler
-#---------------------------------------------------------------------------------
-mkdir -p $target/gcc
-cd $target/gcc
-
-
-if [ ! -f configured-gcc ]
-then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
-	--enable-languages=c,c++,objc,obj-c++ \
-	--disable-multilib\
-	--disable-shared --disable-win32-registry --disable-nls\
-	--enable-cxx-flags="-G0" \
-	--disable-libstdcxx-pch \
-	--target=$target \
-	--with-newlib \
-	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
-	--enable-lto $plugin_ld \
-	--prefix=$prefix \
-	--disable-dependency-tracking \
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPSP release 17" \
-	$CROSS_PARAMS \
-	|| { echo "Error configuring gcc"; exit 1; }
-	touch configured-gcc
-fi
-
-
-if [ ! -f built-gcc ]
-then
-	$MAKE all-gcc || { echo "Error building gcc"; exit 1; }
-	touch built-gcc
-fi
-
-
-if [ ! -f installed-gcc ]
-then
-	$MAKE install-gcc || { echo "Error installing gcc"; exit 1; }
-	touch installed-gcc
-fi
-
-unset CFLAGS
-cd $BUILDDIR/pspsdk-$PSPSDK_VER
-
-if [ ! -f bootstrap-sdk ]
-then
-	./bootstrap || { echo "ERROR RUNNING PSPSDK BOOTSTRAP"; exit 1; }
-	touch bootstrap-sdk
-fi
-
-if [ ! -f configured-sdk ]
-then
-	CFLAGS_FOR_HOST=$cflags LDFLAGS=$ldflags ./configure --with-pspdev="$prefix" --disable-dependency-tracking $CROSS_PARAMS || { echo "ERROR RUNNING PSPSDK CONFIGURE"; exit 1; }
-	touch configured-sdk
-fi
-
-if [ ! -f install-sdk-data ]
-then
-	$MAKE install-data || { echo "ERROR INSTALLING PSPSDK HEADERS"; exit 1; }
-	touch install-sdk-data
-fi
-
-cd $BUILDDIR
-
-unset CFLAGS
-unset CFLAGS_FOR_HOST
-unset LDFLAGS
-
-#---------------------------------------------------------------------------------
-# build and install newlib
-#---------------------------------------------------------------------------------
-mkdir -p $target/newlib
-cd $target/newlib
-
-if [ ! -f configured-newlib ]
-then
-	../../newlib-$NEWLIB_VER/configure \
-	--target=$target \
-	--prefix=$prefix \
-	--disable-dependency-tracking \
-	|| { echo "Error configuring newlib"; exit 1; }
-	touch configured-newlib
-fi
-
-if [ ! -f built-newlib ]
-then
-	$MAKE || { echo "Error building newlib"; exit 1; }
-	touch built-newlib
-fi
-
-if [ ! -f installed-newlib ]
-then
-	$MAKE install || { echo "Error installing newlib"; exit 1; }
-	touch installed-newlib
-fi
-
-#---------------------------------------------------------------------------------
-# build and install the final compiler
-#---------------------------------------------------------------------------------
-
-cd $BUILDDIR
-
-cd $target/gcc
-
-if [ ! -f built-stage2 ]
-then
-	$MAKE all || { echo "Error building gcc stage2"; exit 1; }
-	touch built-stage2
-fi
-
-if [ ! -f installed-stage2 ]
-then
-	$MAKE install || { echo "Error installing gcc stage2"; exit 1; }
-	touch installed-stage2
-fi
-
-rm -fr $prefix/$target/sys-include
-cd $BUILDDIR/pspsdk-$PSPSDK_VER
-
-#---------------------------------------------------------------------------------
-# build and install the psp sdk
-#---------------------------------------------------------------------------------
-echo "building pspsdk ..."
-
-if [ ! -f built-sdk ]
-then
-	$MAKE || { echo "ERROR BUILDING PSPSDK"; exit 1; }
-	touch built-sdk
-fi
-
-if [ ! -f installed-sdk ]
-then
-	$MAKE install || { echo "ERROR INSTALLING PSPSDK"; exit 1; }
-	touch installed-sdk
-fi
-
-cd $BUILDDIR
-
-#---------------------------------------------------------------------------------
-# build and install the debugger
-#---------------------------------------------------------------------------------
-mkdir -p $target/gdb
-cd $target/gdb
-
-if [ ! -f configured-gdb ]
-then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../gdb-$GDB_VER/configure \
-	--disable-nls --prefix=$prefix --target=$target --disable-werror \
-	--disable-dependency-tracking \
-	$CROSS_PARAMS \
-	|| { echo "Error configuring gdb"; exit 1; }
-	touch configured-gdb
-fi
-
-if [ ! -f built-gdb ]
-then
-	$MAKE || { echo "Error building gdb"; exit 1; }
-	touch built-gdb
-fi
-
-if [ ! -f installed-gdb ]
-then
-	$MAKE install || { echo "Error installing gdb"; exit 1; }
-	touch installed-gdb
-fi
-

makedist.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 DATESTRING=$(date +%Y)$(date +%m)$(date +%d)
 cd .. && tar	--exclude=*CVS* --exclude=.svn --exclude=.git --exclude=*.log --exclude=*.bz2 \
-				--exclude=*.gz --exclude=config.sh --exclude=.devkitARM --exclude=.devkitPPC \
+				--exclude=*.gz --exclude=config.sh --exclude=.devkitARM* --exclude=.devkitPPC* \
-				--exclude=.devkitPSP --exclude=.gitignore \
+				--exclude=.devkitA64* --exclude=.gitignore \
 				-cvjf buildscripts-$DATESTRING.tar.bz2 buildscripts

select_toolchain.sh

@@ -1,13 +1,25 @@
 #!/bin/bash
 VERSION=0
+case "$BUILD_DKPRO_PACKAGE" in
+  "1" )
+    VERSION=1
+  ;;
+  "2" )
+    VERSION=2
+  ;;
+  "3" )
+    VERSION=3
+  ;;
+esac
+
 while [ $VERSION -eq 0 ]
 do
   echo
   echo "Please select the toolchain you require"
   echo
-  echo "1: devkitARM (gba gp32 ds)"
+  echo "1: devkitARM (gba gp32 ds 3ds)"
-  echo "2: devkitPPC (gamecube wii)"
+  echo "2: devkitPPC (gamecube wii wii-u)"
-  echo "3: devkitPSP (PSP)"
+  echo "3: devkitA64 (switch)"
   read VERSION
 
   if [ "$VERSION" -ne 1 -a "$VERSION" -ne 2 -a "$VERSION" -ne 3 ]
@@ -18,33 +30,31 @@ done
 
 case "$VERSION" in
   "1" )
-    GCC_VER=4.7.0
+    GCC_VER=10.2.0
-    BINUTILS_VER=2.22
+    BINUTILS_VER=2.34
-    NEWLIB_VER=1.20.0
+    NEWLIB_VER=3.3.0
-    GDB_VER=7.4
     basedir='dkarm-eabi'
     package=devkitARM
-    target=arm-eabi
+    target=arm-none-eabi
     toolchain=DEVKITARM
   ;;
   "2" )
-    GCC_VER=4.6.3
+    GCC_VER=10.2.0
-    BINUTILS_VER=2.22
+    BINUTILS_VER=2.34
-    NEWLIB_VER=1.20.0
+    MN_BINUTILS_VER=2.17
-    GDB_VER=7.4
+    NEWLIB_VER=3.3.0
     basedir='dkppc'
     package=devkitPPC
     target=powerpc-eabi
     toolchain=DEVKITPPC
   ;;
   "3" )
-    GCC_VER=4.6.3
+    GCC_VER=11.1.0
-    BINUTILS_VER=2.22
+    BINUTILS_VER=2.32
-    NEWLIB_VER=1.20.0
+    NEWLIB_VER=4.1.0
-    GDB_VER=7.4
+    basedir='dka64'
-    basedir='dkpsp'
+    package=devkitA64
-    package=devkitPSP
+    target=aarch64-none-elf
-    target=psp
+    toolchain=DEVKITA64
-    toolchain=DEVKITPSP
   ;;
 esac

strip_bins.sh

@@ -19,6 +19,10 @@ do
 	then
 		$HOST_STRIP $f
 	fi
+	if [[ "$f" == *.dll ]]
+	then
+		$HOST_STRIP -d $f
+	fi
 done
 
 if [ $VERSION -eq 2 ]; then

strip_toolchain.sh

@@ -27,5 +27,5 @@ fi
 #---------------------------------------------------------------------------------
 TOOLPATH=$(echo $INSTALLDIR | sed -e 's/^\([a-zA-Z]\):/\/\1/')
 export PATH=$PATH:$TOOLPATH/$package/bin
-
+export prefix=$INSTALLDIR/$CROSSBUILD/$package
 . ./strip_bins.sh