Leahnaya/TataconUSB
1
0
Fork 0
mirror of https://github.com/mon/TataconUSB.git synced 2026-03-21 17:54:27 -05:00
Code Issues Actions Packages Projects Releases Wiki Activity
A small dongle to connect your Wii taiko controller to your computer as a USB keyboard
14 Commits 1 Branch 1 Tag 5.8 MiB
C 92.4%
Makefile 2.6%
OpenSCAD 2.3%
XSLT 1.2%
JavaScript 0.7%
Other 0.7%
bf1041eb40
Go to file
William Toohey bf1041eb40 Add readme on project state
2015-03-20 22:13:18 +10:00
Firmware Working firmware, 20ms input lag though :\ 2015-03-20 12:51:55 +10:00
Hardware Half finished revised hardware - add pushbutton, LEDs etc 2015-03-20 12:53:41 +10:00
.gitignore Correct Gerber generation 2014-11-14 22:28:57 +10:00
README.md Add readme on project state 2015-03-20 22:13:18 +10:00
Render.png Add pretty render + 3D models for all parts 2014-11-14 19:14:45 +10:00

README.md

TataconUSB

A small dongle to connect your Wii taiko controller to your computer as a USB device, instead of using Bluetooth.

Due to 20ms input lag, I have abandoned this project. If a workaround is discovered, I'd love to hear it. It appears to be inherent to the controller.

##Building firmware: At console, run make. You will need AVR GCC installed.

##Building hardware: Send the Gerbers for V2 to a PCB fab, or generate them yourself from the v0.2 tag files. Altium Designer was used, open TataconUSB.PrjPcb as the main file.

Ground is unconnected in V2 (whoops!) so you'll need to solder 2 fly wires. Also, tie the HWBOOT pin to ground to enable easier programming.

Tap the RESET pin to ground to drop the board into bootloader mode, then use Atmel's FLIP programmer to load the .hex.