Leahnaya/TataconUSB
1
0
Fork 0
mirror of https://github.com/mon/TataconUSB.git synced 2026-09-07 09:55:10 -05:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add readme on project state

Browse Source
This commit is contained in:
William Toohey
2015-03-20 22:13:18 +10:00
parent ecbefa1d49
commit bf1041eb40
1 changed files with 19 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
README.md Normal file
View File

@@ -0,0 +1,19 @@
# TataconUSB
A small dongle to connect your Wii taiko controller to your computer as a USB
device, instead of using Bluetooth.
Due to 20ms input lag, I have abandoned this project. If a workaround is
discovered, I'd love to hear it. It appears to be inherent to the controller.
##Building firmware:
At console, run `make`. You will need AVR GCC installed.
##Building hardware:
Send the Gerbers for V2 to a PCB fab, or generate them yourself from the v0.2 tag
files. Altium Designer was used, open TataconUSB.PrjPcb as the main file.
Ground is unconnected in V2 (whoops!) so you'll need to solder 2 fly wires.
Also, tie the HWBOOT pin to ground to enable easier programming.
Tap the RESET pin to ground to drop the board into bootloader mode, then use
Atmel's FLIP programmer to load the .hex.