Fixing an oversight: this was causing the debugger to be disabled if achievements were disabled but hardcore mode was still enabled in the .ini. This fix properly checks for hardcore state via AchievementManager which takes both settings into account.
I've been playing Rock Band 3 recently and have experienced a bug where
sometimes if you disconnect and reconnect a USB microphone, the game
won't pick up on it connecting, not even it you disconnect and reconnect
it again. An investigation into what's going on inside Dolphin shows
that when the game triggers a call to OH0::DeviceOpen after the device
has been reinserted, Dolphin doesn't open the device because it's
already present in m_opened_devices.
Removing the device from m_opened_devices after calling OH0::TriggerHook
in OH0::OnDeviceChange resolves this specific issue in my testing. Doing
this matches us removing the device from m_opened_devices after calling
OH0::TriggerHook in OH0::DeviceClose, but I haven't looked at exactly
what real IOS does.
I have been able to reproduce a much rarer issue that has the same
symptoms on the surface but where OH0::DeviceOpen gets past its
m_opened_devices check. I'm currently not sure what the cause of this
remaining issue is.
RetroAchievements disables pausing too frequently when running but there's no sense of doing this if RetroAchievements does not currently have a game running.
Some games open two USB interfaces, e.g. /dev/usb/oh0 and /dev/usb/hid.
This was causing us to run two scanning threads at once, using up more
CPU time for scanning than we need to.
We have identified that a failed RetroAchievements game load (most easily done when closing a game before the server can finish responding) can leave data behind that causes problems. As such, refactored CloseGame to always delete data even if there wasn't a game loaded when it was called, and call it on the failure paths of LoadGameCallback.
Instead of having USBScanner create "hooks" as it scans for devices,
let's have USBScanner present a list of devices to USBHost and have
USBHost diff the new device list with its old device list to create the
hook calls instead. This gets rid of some complex edge cases that the
next commit otherwise would have to deal with, in particular regarding
toggling determinism and adding new USBHosts to a USBScanner.
Note: After adding the missing locking of m_devices_mutex, I had to move
the locking of m_hooks_mutex to avoid a random deadlock between the CPU
thread and USB scanning thread. (Either that or I would have to lock
m_devices_mutex before m_hooks_mutex.)
This gets rid of the ugly direct access to USBScanner::m_devices that
was introduced by the previous commit.
This also fixes a potential thread safety issue.
USB_HIDv4::TriggerDeviceChangeReply loops through m_devices and calls
GetDeviceEntry for each device. If USB_HIDv4::TriggerDeviceChangeReply
is called after a new device is added to m_devices but before hooks are
dispatched, GetDeviceEntry crashes, because the hook that's supposed to
update m_device_ids hasn't run yet. With this commit, this issue can no
longer happen, because USBHost::m_devices_mutex doesn't get unlocked in
between updating m_devices and dispatching the hooks.
Due to requests from RA Devs, updating the AchievementManager LoadGameCallback to still set MemoryPeeker (and set m_system) if the load game response is NO_GAME_LOADED, so that the memory inspector et al continue function properly on unidentified hashes. Without this, no memory is loaded and the memory inspector will show all zeroes.
If the development system is started for a game with an unrecognized hash, RA_Integration opens a dialog for connecting the hash with a title. That dialog is prepopulated by the results of GameTitleEstimateHandler.
Displays an additional message when an achievement unlocks that isn't on the site yet (either hasn't yet been uploaded or modified from remote) i.e. achievements the "player" is actively developing.
When you use TimePlayed, you have to provide a game ID either when
creating the object or when calling GetTimePlayed on it. If you don't
provide a game ID when creating the object, function calls that don't
take a game ID will silently fail, except for Reload. This isn't very
obvious, and there's no strong benefit to storing the game ID inside
TimePlayed anyway (it just lets TimePlayed skip calling EscapeFileName),
so this commit removes the TimePlayed constructor that takes a game ID
and instead makes the functions that need game IDs always take a game ID
argument.
It was being done manually, which a TODO comment advised against.
Using generic_string() from std::filesystem::path solves this.
Fix encoding issue using generic_wstring instead.
Fix overlays stacking on top of each other or not moving to the edge of
the screen when enabling or disabling overlays while emulation is
active.
This change only applies when Config::GFX_MOVABLE_PERFORMANCE_METRICS is
False.
This lets you use PS3 Rock Band controllers with Wii Rock Band and
Guitar Hero games.
A normal user will probably never have any reason to disable this
behavior, but I figured maybe there's some person out there who would
like to disable it. (For instance, I know there's a mod for RB3 that's
trying to implement the same kind of cross-console controller
compatibility, and that can only be tested if the behavior I'm adding is
disabled.) So the behavior is controlled by an INI-only setting.
Removed VolumeChanged signal, as ConfigChanged will trigger what is needed.
Only applies UpdateSoundStream to things that can change during emulation.
Settings::SetVolume might no longer be used, but left it in.
Gecko codes in Dolphin feature a dedicated field for the creator of the
cheat code. When saved into the INI file, the code name and the creator
name are concatenated, and then inserted in the `[Gecko]` section:
```ini
[Gecko]
$<cheat code name> [<creator>]
<code line 1>
<code line 2>
<code line 3>
<...>
$<other cheat code name> [<creator>]
<code line 1>
<code line 2>
<code line 3>
<...>
```
On the other hand, enabled codes are listed under the `[Gecko_Enabled]`
section, but in this case the creator name is omitted from the line:
```ini
[Gecko_Enabled]
$<cheat code name>
$<other cheat code name>
```
Having the creator name in the `[Gecko]` section but not in the
`[Gecko_Enabled]` section is arguably not ideal, but this is legacy
behavior in Dolphin.
The **Cheat Code Editor** dialog is not acknowledging this subtle
behavior in Dolphin: the cheat code name and the creator name *can* be
both inserted in the name field. This issue manifests as an inconsistent
state where a Gecko code that *appears* to be enabled has no effect when
the game is launched.
As part of this fix, the creator name (if present) is now moved into the
dedicated creator field before the code is stored internally.
Test plan:
- Right-click on any game and open the **Properties** dialog.
- Switch to the **Gecko Codes** tab.
- Press the **Add New Code...** button.
- In the **Cheat Code Editor** dialog:
- Enter `This is a test [Jane Doe]` in the **Name:** field.
- Enter `01234567 00000000` in the **Code:** field.
- Press **Save**.
- Observe that the newly added code is now in the list, and *appears* to
be enabled.
- Close the **Properties** dialog.
- Right-click on the same game and open the **Properties** dialog again.
**Without** the fix, the newly added code, while still on the list, has
been inadvertently disabled (it was never really enabled!).
**With** the fix, the newly added code is the list and remains enabled.
This fixes https://bugs.dolphin-emu.org/issues/13695.
Fix the following bug:
* Have a moveable ImGui overlay enabled, such as the Statistics window.
* Pause the game.
* Click and hold on the overlay's title bar as if you were going to move
it. Because the screen isn't updating while the game is paused, you
won't be able to actually move the overlay.
* Press the Frame Advance hotkey several times until it stops
responding.
At this point emulation hotkeys are no longer responsive. This can be
resolved by selecting Play from the toolbar or menu, or selecting Frame
Advance from the menu a couple times, but it's annoying and not obvious
what's gone wrong or how to fix it.
Why the bug is happening:
* Doing a framestep while clicking on the overlay title bar causes ImGui
to set IO.WantCaptureKeyboard to true, indicating that ImGui is
requesting Dolphin ignore any keyboard events while the overlay is
being interacted with.
* Dolphin complies with this request, causing
Host_UIBlocksControllerState to return true and thus setting the input
gate to ignore input.
* IO.WantCaptureKeyboard is only updated when ImGui::NewFrame() is
called, which only happens at the end of each present. It thus remains
true indefinitely since the game paused after the last framestep, and
so Dolphin ignores any hotkeys such as the framestep or play keys.
The fix:
Ignore IO.WantCaptureKeyboard when the game is paused. ImGui can't
meaningfully capture input anyway when the game is paused, so this
shouldn't cause any problems elsewhere.
Once async presentation is implemented we'll want to revert this change,
both because it'll become unnecessary and because ImGui will be able to
do stuff while paused and so suppressing emulation hotkeys will actually
be useful.
This is an Android continuation of bc95c00. We now call
InputDetector::Update immediately after receiving an input event from
Android instead of periodically calling it in a sleep loop. This
improves detection of very short inputs, which are especially likely to
occur for volume buttons on phones (or at least on my phone) if you
don't intentionally keep them held down.
bbf72e7 made a change where you can pass `false` to certain MemChecks
functions to get them to skip performing an "update" step. It was then
up to the caller to call the Update function later.
This commit changes the implementation so that, instead of the caller
passing in a boolean that controls whether a function calls Update, the
function now returns an object that on destruction will call Update.
Callers that are fine with Update being called right away can skip
storing the object in a variable and thereby call Update immediately,
and callers that want to call Update later can keep the object around.
This new design reduces the risk that someone will forget calling
Update.
Refactors the AR/Gecko/Patch code approval process to verify from every possible game ini, not just the base game ID. This fixes codes on specific revisions or codes general to any region.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,brocken,bufferin,clen,collet,datas,delt,diety,extint,fpr,inout,inport,interm,nd,nin,ontop,pixelx,re-use,re-used,sav,stateman,strat,transer,wil`
In PPCTables.cpp, the code is currently unused so I was unable to test it.
In CustomPipeline.cpp, a pointer to member function cannot be used due to 16.4.5.2.1 of the C++ Standard regarding "addressable functions". https://eel.is/c++draft/namespace.std#6
In Fs.cpp and DirectoryBlob.cpp, these examples used projections in a previous iteration of this commit, but no longer do. Still, they remain in this commit because the PR they would actually belong to is already merged.
In LabelMap.cpp, the code is currently unused so I was unable to test it.
In WiiUtils.cpp, the magic value `1u` was replaced by the constant value `DiscIO::PARTITION_UPDATE`.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,bufferin,clen,collet,datas,delt,fpr,inout,inport,interm,pixelx,re-use,re-used,sav,stateman,strat,wil`
Clamp overlays to the render window (with some padding), reset their
positions when the render window changes sizes, and add a setting to
enable moving the overlays (off by default, .ini only for now).
This adds the option to configure real Wiimotes by specifying their Bluetooth addresses in
the configuration file. This allows off-brand Wiimotes to work without using the
Bluetooth Passthrough option, if you know their Bluetooth addresses beforehand.
Despite correctly setting the LAP to `0x9e8b00` in `WiimoteScannerLinux::FindWiimotes`
while scanning, which is indeed enough to make off-brand / knock-off Wiimotes respond to a
Bluetooth Inquiry, some (several? all?) bluetooth adapters seem to override and ignore
this given LAP value when performing the Inquiry, and actually use the `0x9e8b33` value as
if a null pointer have been given to `hci_inquiry`, as inspection of USB/Bluetooth packets
by Wireshark indicate. Off-brand Wiimotes don't respond to inquiries with this LAP.
If one happens to know the Bluetooth address of their Wiimote (for example, by checking
`BluetoothPassthrough.LinkKeys` after using Bluetooth Passthrough, or other means such as
directly using `libusb` to force the adapter to use the correct LAP in the Inquiry), then
it's enough to add those addresses to the vector of found Wiimotes.
Since this a niche use case and I only happen to know and have tested in Linux, this
change only affects the `WiimoteScannerLinux` backend. It's likely that it could be added
to other backends, but I'm unfamiliar with these.
If no addresses are given or this config section does not exist, behavior is completely
unchanged.
Introduce a new "Enable Time Tracking" checkbox in the InterfacePane UI. The checkbox is dynamically enabled or disabled based on the emulation state, preventing changes while emulation is active.
Creates TimePlayed class and implemented constructors, AddTime, GetTimePlayed, and Reload methods. Updates CMakeLists.txt and DolphinLib.props as appropriate.
I think someone confused these with the actual token and bounding box
registers in PE, which were added later. In CP they never did anything
and it's suspicious that they have the same addresses as their PE
counterparts. On real hardware they always read as zero.
Move ImGui::End() calls out of if(ImGui::Begin()) blocks.
Quoting from ImGui::Begin's function comment in imgui.cpp:
"You always need to call ImGui::End() even if false is returned."
In practice this didn't cause problems because the windows don't have
title bars and thus can't be collapsed, and so the block containing
::End would always run, but let's do it the right way.
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
We exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00218 mov w24, #0x100000 ; =1048576
0xcb180379 sub x25, x27, x24
After:
0xd1440379 sub x25, x27, #0x100, lsl #12 ; =0x100000
You can encode a 12-bit immediate in a SUB instruction on ARM64. We can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x5280003a mov w26, #0x1 ; =1
0xcb1a033b sub x27, x25, x26
After:
0xd100073b sub x27, x25, #0x1
While we cannot always avoid materializing immediates, we can still
inspect the most significant bit and potentially skip sign extension.
This can sometimes save an instruction.
Before:
0x5280003a mov w26, #0x1 ; =1
0x93407f5b sxtw x27, w26
0xcb38c37b sub x27, x27, w24, sxtw
After:
0x5280003a mov w26, #0x1 ; =1
0xcb38c35b sub x27, x26, w24, sxtw
Before:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb38c339 sub x25, x25, w24, sxtw
After:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb180339 sub x25, x25, x24
You can encode a shifted 12-bit immediate in an ADD instruction on
ARM64. If the negated constant fits in this range, we can exploit this
to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52bff01a mov w26, #-0x800000 ; =-8388608
0x93407f1b sxtw x27, w24
0xcb3ac37b sub x27, x27, w26, sxtw
After:
0x93407f1b sxtw x27, w24
0x9160037b add x27, x27, #0x800, lsl #12 ; =0x800000
You can encode a 12-bit immediate in an ADD instruction on ARM64. If the
negated constant fits in this range, we can exploit this to avoid
materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x12800019 mov w25, #-0x1 ; =-1
0x93407f5b sxtw x27, w26
0xcb39c37b sub x27, x27, w25, sxtw
After:
0x93407f5b sxtw x27, w26
0x9100077b add x27, x27, #0x1
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00099 mov w25, #0x40000 ; =262144
0x93407f7a sxtw x26, w27
0xcb39c35a sub x26, x26, w25, sxtw
After:
0x93407f7a sxtw x26, w27
0xd141035a sub x26, x26, #0x40, lsl #12 ; =0x40000
You can encode a 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52800416 mov w22, #0x20 ; =32
0x93407f78 sxtw x24, w27
0xcb36c318 sub x24, x24, w22, sxtw
After:
0x93407f78 sxtw x24, w27
0xd1008318 sub x24, x24, #0x20
A number of settings in the `debugger` group were wrongly using a newly
constructed `QSettings` object instead of the singleton object that
`GetQSettings()` provides.
This made the application create a spurious, extra configuration file in
the user directory:
```
~/.config/Dolphin Emulator/dolphin-emu.conf
```
Notice that, by default, the application configuration files are stored
in `~/.config/dolphin-emu`; not in `~/.config/Dolphin Emulator`.
Adding a community-requested list of Gecko and Action Replay codes to the allowlist. Many of these codes were from the wiki and are being added to Dolphin's repo for the first time.
Change the displayed controls in the TAS Input window when the
controller's extension (including MotionPlus) is changed.
This previously required restarting Dolphin after the attachment was
changed, as the controls were never updated after the WiiTASInputWindow
was created at Dolphin startup.
When I wrote 71e9766519, there was an interaction I didn't take into
account: When setting eq, SetCRFieldBit assumes that all bits in the
passed-in host register except the least significant bit are 0. But if
we use EON or ORN, all bits except the least significant bit get set to
1. This can cause eq to end up unset when it should be set.
This commit fixes the issue.
crandc is unaffected by the issue because the "1" bits get ANDed with
"0" bits from the first operand.
Note that in practice, we never have both bits_1_to_31_are_set and
negate at once, so while it looks like this commit adds an extra AND
instruction in some cases, those cases don't happen in practice, meaning
this fix shouldn't affect performance.
QCheckBox::toggled and other similar signals are used to save changes and to update widget status (such as enabled).. OnConfigChanged needs to load new values and trigger widget updates, but the new value shouldn't trigger a save. A save is unnecessary (the config has the correct values and the UI is being updated to those values) and it'd trigger another ConfigChanged signal. This commit blocks the save without blocking the signal entirely.
The computed value is only used when the register is equal to zero, so
we can fully precompute it and materialize the constant instead. In
other words, we change from
```
return reg == 0 ? (reg | 1ULL << 63) : reg;
```
to
```
return reg == 0 ? 1ULL << 63 : reg;
```
The number of instructions remains the same, but we eliminate an
unnecessary dependency on the register value.
Before:
0xb241037a orr x26, x27, #0x8000000000000000
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
After:
0xd2f0001a mov x26, #-0x8000000000000000 ; =-9223372036854775808
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
In NandPaths.cpp, the `std::initializer_list<char>` of illegal characters has been turned into a `char[]` (similar to the one in GameList.cpp).
The reverse iteration in ResourcePack.cpp seemed to provide no benefits, and doing without it it seemed to have no ill effects.
The new `Common::Contains` and `Common::ContainsSubrange` function objects mirror C++23's `std::ranges::contains` and `std::ranges::contains_subrange`, respectively.
Recently there was some issues in TASVideos trying to sync a Donkey Kong Country Returns TAS. It eventually was synced by directly using the config from the TAS author. The exact setting which caused the desync was narrowed down to being in SYSCONF, with the country code. The TAS author lives in the US, so the country code matched the US country code, while the person attempting to sync the TAS did not live in the US.
Adding SYSCONF country code to the DTM should avoid this being an issue for future Dolphin versions.
When the input register and carry flags are known, we can always
precompute the result.
We still materialize the immediate when the condition register
needs to be updated, but this seems to be a general problem. I might
look into that one day, but for now this'll do.
- ConstantFalse
Before:
0x52800119 mov w25, #0x8 ; =8
0x2a1903fa mov w26, w25
After:
N/A
- ConstantTrue
Before:
0x52800119 mov w25, #0x8 ; =8
0x1100073a add w26, w25, #0x1
After:
N/A
Same optimization we did for subfex. Skip loading the carry flag into a
temporary register first when we're dealing with zero.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
When both the input register and the carry flag are constants, the
result can be precomputed.
Before:
0x52800016 mov w22, #0x0 ; =0
0x2a3603f6 mvn w22, w22
After:
The result is either -1 or 0 depending on the state of the carry flag.
This can be done with a csetm instruction.
Before:
0x1280001a mov w26, #-0x1 ; =-1
0x1a1f035a adc w26, w26, wzr
After:
0x5a9f23fa csetm w26, lo
When the immediate is zero, we can load the carry flag from memory
directly to the destination register.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
Resolves duplicate OSD messages for Loading and Found custom textures.
VideoBackend initialization results in HiresTexture::Init being called.
We already call HiresTexture::Update when OnNewTitleLoad is called.
Thus we can remove HiresTextures::Init completely as it is redundant.
All valid PPC imm masks (except for all zeroes and all ones) are also
valid AArch64 imm masks. This lets us optimize things a little.
Note that because I'm now ANDing rS before rotating it, its AND mask
is rotated left. All AArch64 imm masks can be rotated by any amount and
still be valid AArch64 imm masks.
No games seem to use this, so this isn't useful as a performance
optimization, but it's required for correctness because the (sh == 0)
case of our implementation doesn't handle zero masks.
In JitRegCache.cpp, the lambda predicate were replaced by a pointer to member function because ranges algorithms are able to invoke those.
In ConvertDialog.cpp, the `std::mem_fn` helper was removed because ranges algorithms are able to handle pointers to member functions as predicates.
In BoundingBox.cpp, the lambda predicate was returning the bool element unchanged, so `std::identity` was a better fit.
In WiimoteReal.cpp, JitRegCache.cpp, lambda predicates were replaced by pointers to member functions because ranges algorithms are able invoke those.
In ConvertDialog.cpp, the `std::mem_fn` helper was removed because ranges algorithms are able to handle pointers to member functions as predicates.
In DITSpecification.cpp, MaterialAsset.cpp, and ShaderAsset.cpp, lambda predicates were replaced by pointers to member functions because ranges algorithms are able invoke those.
In NetPlayClient.cpp, the non-trivial `NetPlay::Player` elements were being passed by value in `NetPlayClient::DoAllPlayersHaveGame()`. This has been fixed.
In WIABlob.cpp, the second example's predicate was returning the `std::optional` by value instead of implicitly converting it to a bool. This has been fixed.
Creates a layer outside the game config layer system and passes it to the created gfx widows, so as to not interfere with the global config system.
Supports multiple game properties being open at once.
Supports editing while a game is playing, but the options only save and update the active game when the window is closed.
Right-clicking will remove a property from the game ini.
Prefer BLENDVPD over VBLENDVPD if the latter doesn't save any
instructions.
VBLENDVPD allows separate source and destination registers, which can
eliminate a MOVAPD/MOVSD. However, on Intel since Skylake, VBLENDVPD
takes additional uops to execute compared to BLENDVPD (according to
https://uops.info). On AMD and older Intel microarchitectures there is no
difference.
Some generators (like Unix Makefiles and Xcode) copy an app's Info.plist at configure time.
This causes a problem when we need to generate the Info.plist at build time, like how we
currently do it with ScmRevGen. Instead of generating the Info.plist directly in ScmRevGen,
provide an Info.plist without any version information to CMake at configure time, have
ScmRevGen generate a separate plist file with the version information at build time, and
then merge the two together to create the final Info.plist.
The read thread could call Reset, which in turn tried to join the read
thread, leading to a SIGABRT. This manifested as Dolphin consistently
crashing when disconnecting a GC adapter and having a chance of crashing
a few seconds after connecting a GC adapter.
Now that patches and codes are enabled on a case by case basis, remove patcher code blocking codes entirely in hardcore mode, and reword the warning to be more accurate.
This apparently didn't compile on macOS six years ago before c++20, but
it should be fine by now.
While I'm at it, make the constants upper case per convention.
If the host is in hardcore mode, all joining players will be set to hardcore mode; if not, all joining players will be set to softcore. This ensures all players have the same settings and remain synchroized.
The primary focus of this PR is the Eternal Darkness patch which fixes hanging at startup, which prior to this fix makes Eternal Darkness unplayable in hardcore. The MHTri patch was added as well simply because it could be.
GXAbortFrame() is problematic for Dolphin because it first writes
PI_FIFO_RESET (for which we discard our internal fifo), then disables CP
reads (for which we execute pending commands in the GP fifo in emulated
memory). I don't know whether there is a race condition on hardware, but
there is one for us. Avoid this by also doing a GPU sync here.
The value being stored must be loaded into a register. In the case of an
immediate value, this means it must be materialized. The value is
eventually byteswapped before performing the store.
This can be simplified for the value 0 for two reasons:
- ARM64 has a dedicated zero register, so does not need to be
materialized.
- Byteswapping zero is still zero, so we can skip this step.
We could skip byteswapping for other values by immediately materializing
the byteswapped value in a register, but the benefits are not so clear
there (if the value needs to be materialized anyway, it is better to do
it up front).
Before:
0x5280001b mov w27, #0x0 ; =0
0xb9404fba ldr w26, [x29, #0x4c]
0x12881862 mov w2, #-0x40c4 ; =-16580
0x0b020342 add w2, w26, w2
0x5ac00b61 rev w1, w27
0xb8226b81 str w1, [x28, x2]
After:
0xb9404fbb ldr w27, [x29, #0x4c]
0x12881862 mov w2, #-0x40c4 ; =-16580
0x0b020362 add w2, w27, w2
0xb8226b9f str wzr, [x28, x2]
Unlike on x64, inverting EQ or GT in SetCRFieldBit saves us one
instruction. Also unlike on x64, inverting SO or LT in GetCRFieldBit
requires an extra instruction (just like in SetCRFieldBit). Due to this,
replacing an invert in GetCRFieldBit with an invert in SetCRFieldBit
when possible is either equally good or better - never worse.
MUL and SUB can be combined in one instruction.
Before:
0x1b1a7c01 mul w1, w0, w26
0x4b010318 sub w24, w24, w1
After:
0x1b1ae018 msub w24, w0, w26, w24
Makes Graphics -> Hacks -> Skip EFB Access from CPU enabled by default. Some GPU drivers stall when EFB access occurs in games where EFB is not used. Most games that require this setting set to 'true' already have this defined in their game inis.
`std::erase` is a replacement for the remove-erase idiom.
Changes to `OpenModeToAndroid` inadvertently revealed that the prior implementation had UB (potentially deleting the end iterator). This is now fixed.
Three bugs specific to older Wii games:
- The size difference between high-pass and biquad filter was not
accounted for, causing wiimote related fields to be corrupted.
- Wiimote sample buffer pointers were advanced by 32 samples per
millisecond instead of 6 samples. Usually hidden by the first bug.
- PB updates on Wii were being byte-swapped twice, but I've not actually
found any Wii games that make use of PB updates.
This fixes wiimote audio in at least the following games:
- Excite Truck
- Ice Age 2: The Meltdown
- Kororinpa: Marble Mania
- Rapala Tournament Fishing
- Shrek the Third
- Super Monkey Ball: Banana Blitz
- Tiger Woods PGA Tour 07
- WarioWare: Smooth Moves (issue 11725)
- Wing Island
Fixes LIT (https://bugs.dolphin-emu.org/issues/13635). The text does not include normals, but has lighting enabled. With the previous default of (0, 0, 0), lighting was always black (as dot(X, (0, 0, 0)) is always 0). It seems like the normal from the map in the background (0, 0, 1) is re-used.
LIT also has the vertex color enabled while vertex color is not specified, the same as SMS's debug cubes; the default MissingColorValue GameINI value of solid white seems to work correctly in this case.
No need to materialize the immediate if it is zero, we can just use WZR.
Before:
mov w27, #0x0 ; =0
str w27, [x29, #0x1178]
After:
str wzr, [x29, #0x1178]
In VolumeVerifier.cpp, constructing a `std::string_view` of the volume's GameID is unnecessary, as `std::`(`ranges::`)`binary_search` supports heterogeneous lookup. The usage in GameFile.cpp is a perfect example.
In OGLConfig.cpp, `std::views::reverse` is used rather than sorting using `std::ranges::greater` in order to parallel other instances of reverse iteration in the function.
In DSPCore.cpp, there were two `std::fill` uses that could be simplified using `std::fill_n`. Due to their proximity with other `std::fill` algorithms being modernized with ranges, I chose to make these examples into the rare `std::ranges::fill_n`.
In StringUtil.h, the lambdas wrapping `Common::ToLower(char)` and `Common::ToUpper(char)` were only necessary due to the function names being overloaded.
Many games call GXSetGPFifo() without first waiting for the GP to finish
consuming outstanding commands in the previous GP fifo. Normally,
Dolphin runs OpcodeDecoding in 1000-cycle time slices. In that time
frame, GXSetGPFifo() has probably completed and the GP read pointer now
points to entirely new memory. If the last GP fifo copy ended in an
incomplete command, the new GP fifo would most likely desync for a
while. To avoid all this, give the GP a time slice right now to copy the
remaining data from the previous GP fifo.
