1. Fix Wii Speak SAMPLER_MUTE register:
The register should be 12 (i.e. 0x0c) instead of 0xc0.
2. Fix Wii Speak buffer memcpy size parameter:
It seems to fix random echoes and reduce noises when nobody is speaking.
3. Change the isochronous transfer timing:
It is based on empirical testing.
Based on @noahpistilli (Sketch) PR:
https://github.com/dolphin-emu/dolphin/pull/12567
Fixed the Windows support and the heisenbug caused by uninitialized
members.
Config system integration finalized.
The clone of system memory used by AchievementManager during achievement development for the sake of thread decoupling was only copying MEM1; this grabs MEM2 as well if it exists.
Within AchievementManager, CloseGame being called when LoadGame fails was causing m_queue.Cancel to be called within a lock when Cancel itself locks until it is empty, causing a deadlock. This is resolved by cancelling the queues outside of the lock when they are safe to wait for resolutions.
A new class that derives from `QMenu` has been introduced. Menus of this
`NonAutodismissibleMenu` type will stay visible when a _checkable_
action is triggered.
This is convenient in menus that feature a series of check boxes that
toggle visibility of third components (e.g. the **List Columns** menu),
allowing the user to toggle several actions at once.
For now, the new type is used in the top menu bar.
Verify a touchpad is present before polling it for input. Without this
check the Debug log is spammed with the message "error: Parameter
'touchpad' is invalid" if you have a controller without a touchpad.
One would think every touchpad supports at least 1 finger, but in case
there's some weird edge case check the finger count to be sure.
This fixes a memory leak that would occur when the Android frontend
calls LogManager::Init more than once in order to reload settings.
Note that the log window listener is now owned by LogManager instead of
by the frontend, making it consistent with the other log listeners.
Add a method to detect console ID from an input file and instruct rcheevos to load as Gamecube or Wii accordingly. Also, hash .wads upon loading, to support achievements on WiiWare titles.
Previously, PerformanceTracker registered a callback to be updated on
emulation state changes. PerformanceTrackers live in a global variable
(g_perf_metrics) within libvideocommon. The callback was stored in a
global variable in libcore. This created a race condition at shutdown
between these libraries, when the PerfTracker's destructor tried to
unregister the callback.
Notify the PerfTracker directly from libcore, without callbacks, since
Core.cpp already references g_perf_metrics explicitly. Also rename
Core::CallOnStateChangedCallbacks to NotifyStateChanged to better
reflect what it's doing.
Extracted games contain a boot.bin file that contains the disc header.
These boot.bin files are considered valid volumes by Dolphin, since
Dolphin only checks the disc header to determine if something is a valid
GC/Wii disc. Running them doesn't make any sense, though.
boot.bin files used to not be scanned by Dolphin due to their file
extension, but .bin was added to the list of file extensions to scan for
in 494e2c0. To stop them from showing up in the game list, let's update
the ShouldHideFromGameList mechanism.
Different threads are adding and calling callbacks, so this should have
some locking. This is both to ensure thread safety when accessing
`s_callbacks` and to ensure that there won't be situations where a
callback gets called after it's removed.
`s_callback_guards` is also accessed from multiple threads and has
therefore been made atomic.
Require callers of Config::AddConfigChangedCallback and
CPUThreadConfigCallback::AddConfigChangedCallback to handle the returned
ConfigChangedCallbackIDs to hopefully prevent future issues with
callbacks getting called after their associated objects have been
destroyed.
Use a single lambda as a callback which calls InitCustomPaths and
RefreshConfig instead of having separate callbacks for each of them.
This fixes the callback for InitCustomPaths not being removed on
shutdown; the callback for the lambda (previously for RefreshConfig) is
already removed in Shutdown().
Prevent SetHardcoreMode from being called after m_client is set to
nullptr. rc_client_set_hardcore_enabled() checks for nullptr so this
didn't cause any problems, but better not to rely on that.
Also prevents multiple SetHardcoreMode callbacks from piling up when
repeatedly toggling Config::RA_ENABLED.
Remove ConfigChangedCallback in MainWindow's destructor to prevent the
callback from accessing the destroyed MainWindow afterward.
After MainWindow is destroyed UICommon::Shutdown calls
LogManager::Shutdown which ultimately triggers any remaining callbacks.
This resulted in calling MainWindow::OnHardcoreChanged, which crashed in
debug builds and didn't have any obvious effect in release builds.
Fixing an oversight: this was causing the debugger to be disabled if achievements were disabled but hardcore mode was still enabled in the .ini. This fix properly checks for hardcore state via AchievementManager which takes both settings into account.
I've been playing Rock Band 3 recently and have experienced a bug where
sometimes if you disconnect and reconnect a USB microphone, the game
won't pick up on it connecting, not even it you disconnect and reconnect
it again. An investigation into what's going on inside Dolphin shows
that when the game triggers a call to OH0::DeviceOpen after the device
has been reinserted, Dolphin doesn't open the device because it's
already present in m_opened_devices.
Removing the device from m_opened_devices after calling OH0::TriggerHook
in OH0::OnDeviceChange resolves this specific issue in my testing. Doing
this matches us removing the device from m_opened_devices after calling
OH0::TriggerHook in OH0::DeviceClose, but I haven't looked at exactly
what real IOS does.
I have been able to reproduce a much rarer issue that has the same
symptoms on the surface but where OH0::DeviceOpen gets past its
m_opened_devices check. I'm currently not sure what the cause of this
remaining issue is.
RetroAchievements disables pausing too frequently when running but there's no sense of doing this if RetroAchievements does not currently have a game running.
Some games open two USB interfaces, e.g. /dev/usb/oh0 and /dev/usb/hid.
This was causing us to run two scanning threads at once, using up more
CPU time for scanning than we need to.
We have identified that a failed RetroAchievements game load (most easily done when closing a game before the server can finish responding) can leave data behind that causes problems. As such, refactored CloseGame to always delete data even if there wasn't a game loaded when it was called, and call it on the failure paths of LoadGameCallback.
Instead of having USBScanner create "hooks" as it scans for devices,
let's have USBScanner present a list of devices to USBHost and have
USBHost diff the new device list with its old device list to create the
hook calls instead. This gets rid of some complex edge cases that the
next commit otherwise would have to deal with, in particular regarding
toggling determinism and adding new USBHosts to a USBScanner.
Note: After adding the missing locking of m_devices_mutex, I had to move
the locking of m_hooks_mutex to avoid a random deadlock between the CPU
thread and USB scanning thread. (Either that or I would have to lock
m_devices_mutex before m_hooks_mutex.)
This gets rid of the ugly direct access to USBScanner::m_devices that
was introduced by the previous commit.
This also fixes a potential thread safety issue.
USB_HIDv4::TriggerDeviceChangeReply loops through m_devices and calls
GetDeviceEntry for each device. If USB_HIDv4::TriggerDeviceChangeReply
is called after a new device is added to m_devices but before hooks are
dispatched, GetDeviceEntry crashes, because the hook that's supposed to
update m_device_ids hasn't run yet. With this commit, this issue can no
longer happen, because USBHost::m_devices_mutex doesn't get unlocked in
between updating m_devices and dispatching the hooks.
Due to requests from RA Devs, updating the AchievementManager LoadGameCallback to still set MemoryPeeker (and set m_system) if the load game response is NO_GAME_LOADED, so that the memory inspector et al continue function properly on unidentified hashes. Without this, no memory is loaded and the memory inspector will show all zeroes.
If the development system is started for a game with an unrecognized hash, RA_Integration opens a dialog for connecting the hash with a title. That dialog is prepopulated by the results of GameTitleEstimateHandler.
Displays an additional message when an achievement unlocks that isn't on the site yet (either hasn't yet been uploaded or modified from remote) i.e. achievements the "player" is actively developing.
When you use TimePlayed, you have to provide a game ID either when
creating the object or when calling GetTimePlayed on it. If you don't
provide a game ID when creating the object, function calls that don't
take a game ID will silently fail, except for Reload. This isn't very
obvious, and there's no strong benefit to storing the game ID inside
TimePlayed anyway (it just lets TimePlayed skip calling EscapeFileName),
so this commit removes the TimePlayed constructor that takes a game ID
and instead makes the functions that need game IDs always take a game ID
argument.
It was being done manually, which a TODO comment advised against.
Using generic_string() from std::filesystem::path solves this.
Fix encoding issue using generic_wstring instead.
Fix overlays stacking on top of each other or not moving to the edge of
the screen when enabling or disabling overlays while emulation is
active.
This change only applies when Config::GFX_MOVABLE_PERFORMANCE_METRICS is
False.
This lets you use PS3 Rock Band controllers with Wii Rock Band and
Guitar Hero games.
A normal user will probably never have any reason to disable this
behavior, but I figured maybe there's some person out there who would
like to disable it. (For instance, I know there's a mod for RB3 that's
trying to implement the same kind of cross-console controller
compatibility, and that can only be tested if the behavior I'm adding is
disabled.) So the behavior is controlled by an INI-only setting.
Removed VolumeChanged signal, as ConfigChanged will trigger what is needed.
Only applies UpdateSoundStream to things that can change during emulation.
Settings::SetVolume might no longer be used, but left it in.
Gecko codes in Dolphin feature a dedicated field for the creator of the
cheat code. When saved into the INI file, the code name and the creator
name are concatenated, and then inserted in the `[Gecko]` section:
```ini
[Gecko]
$<cheat code name> [<creator>]
<code line 1>
<code line 2>
<code line 3>
<...>
$<other cheat code name> [<creator>]
<code line 1>
<code line 2>
<code line 3>
<...>
```
On the other hand, enabled codes are listed under the `[Gecko_Enabled]`
section, but in this case the creator name is omitted from the line:
```ini
[Gecko_Enabled]
$<cheat code name>
$<other cheat code name>
```
Having the creator name in the `[Gecko]` section but not in the
`[Gecko_Enabled]` section is arguably not ideal, but this is legacy
behavior in Dolphin.
The **Cheat Code Editor** dialog is not acknowledging this subtle
behavior in Dolphin: the cheat code name and the creator name *can* be
both inserted in the name field. This issue manifests as an inconsistent
state where a Gecko code that *appears* to be enabled has no effect when
the game is launched.
As part of this fix, the creator name (if present) is now moved into the
dedicated creator field before the code is stored internally.
Test plan:
- Right-click on any game and open the **Properties** dialog.
- Switch to the **Gecko Codes** tab.
- Press the **Add New Code...** button.
- In the **Cheat Code Editor** dialog:
- Enter `This is a test [Jane Doe]` in the **Name:** field.
- Enter `01234567 00000000` in the **Code:** field.
- Press **Save**.
- Observe that the newly added code is now in the list, and *appears* to
be enabled.
- Close the **Properties** dialog.
- Right-click on the same game and open the **Properties** dialog again.
**Without** the fix, the newly added code, while still on the list, has
been inadvertently disabled (it was never really enabled!).
**With** the fix, the newly added code is the list and remains enabled.
This fixes https://bugs.dolphin-emu.org/issues/13695.
Fix the following bug:
* Have a moveable ImGui overlay enabled, such as the Statistics window.
* Pause the game.
* Click and hold on the overlay's title bar as if you were going to move
it. Because the screen isn't updating while the game is paused, you
won't be able to actually move the overlay.
* Press the Frame Advance hotkey several times until it stops
responding.
At this point emulation hotkeys are no longer responsive. This can be
resolved by selecting Play from the toolbar or menu, or selecting Frame
Advance from the menu a couple times, but it's annoying and not obvious
what's gone wrong or how to fix it.
Why the bug is happening:
* Doing a framestep while clicking on the overlay title bar causes ImGui
to set IO.WantCaptureKeyboard to true, indicating that ImGui is
requesting Dolphin ignore any keyboard events while the overlay is
being interacted with.
* Dolphin complies with this request, causing
Host_UIBlocksControllerState to return true and thus setting the input
gate to ignore input.
* IO.WantCaptureKeyboard is only updated when ImGui::NewFrame() is
called, which only happens at the end of each present. It thus remains
true indefinitely since the game paused after the last framestep, and
so Dolphin ignores any hotkeys such as the framestep or play keys.
The fix:
Ignore IO.WantCaptureKeyboard when the game is paused. ImGui can't
meaningfully capture input anyway when the game is paused, so this
shouldn't cause any problems elsewhere.
Once async presentation is implemented we'll want to revert this change,
both because it'll become unnecessary and because ImGui will be able to
do stuff while paused and so suppressing emulation hotkeys will actually
be useful.
This is an Android continuation of bc95c00. We now call
InputDetector::Update immediately after receiving an input event from
Android instead of periodically calling it in a sleep loop. This
improves detection of very short inputs, which are especially likely to
occur for volume buttons on phones (or at least on my phone) if you
don't intentionally keep them held down.
bbf72e7 made a change where you can pass `false` to certain MemChecks
functions to get them to skip performing an "update" step. It was then
up to the caller to call the Update function later.
This commit changes the implementation so that, instead of the caller
passing in a boolean that controls whether a function calls Update, the
function now returns an object that on destruction will call Update.
Callers that are fine with Update being called right away can skip
storing the object in a variable and thereby call Update immediately,
and callers that want to call Update later can keep the object around.
This new design reduces the risk that someone will forget calling
Update.
Refactors the AR/Gecko/Patch code approval process to verify from every possible game ini, not just the base game ID. This fixes codes on specific revisions or codes general to any region.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,brocken,bufferin,clen,collet,datas,delt,diety,extint,fpr,inout,inport,interm,nd,nin,ontop,pixelx,re-use,re-used,sav,stateman,strat,transer,wil`
In PPCTables.cpp, the code is currently unused so I was unable to test it.
In CustomPipeline.cpp, a pointer to member function cannot be used due to 16.4.5.2.1 of the C++ Standard regarding "addressable functions". https://eel.is/c++draft/namespace.std#6
In Fs.cpp and DirectoryBlob.cpp, these examples used projections in a previous iteration of this commit, but no longer do. Still, they remain in this commit because the PR they would actually belong to is already merged.
In LabelMap.cpp, the code is currently unused so I was unable to test it.
In WiiUtils.cpp, the magic value `1u` was replaced by the constant value `DiscIO::PARTITION_UPDATE`.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,bufferin,clen,collet,datas,delt,fpr,inout,inport,interm,pixelx,re-use,re-used,sav,stateman,strat,wil`
Clamp overlays to the render window (with some padding), reset their
positions when the render window changes sizes, and add a setting to
enable moving the overlays (off by default, .ini only for now).
This adds the option to configure real Wiimotes by specifying their Bluetooth addresses in
the configuration file. This allows off-brand Wiimotes to work without using the
Bluetooth Passthrough option, if you know their Bluetooth addresses beforehand.
Despite correctly setting the LAP to `0x9e8b00` in `WiimoteScannerLinux::FindWiimotes`
while scanning, which is indeed enough to make off-brand / knock-off Wiimotes respond to a
Bluetooth Inquiry, some (several? all?) bluetooth adapters seem to override and ignore
this given LAP value when performing the Inquiry, and actually use the `0x9e8b33` value as
if a null pointer have been given to `hci_inquiry`, as inspection of USB/Bluetooth packets
by Wireshark indicate. Off-brand Wiimotes don't respond to inquiries with this LAP.
If one happens to know the Bluetooth address of their Wiimote (for example, by checking
`BluetoothPassthrough.LinkKeys` after using Bluetooth Passthrough, or other means such as
directly using `libusb` to force the adapter to use the correct LAP in the Inquiry), then
it's enough to add those addresses to the vector of found Wiimotes.
Since this a niche use case and I only happen to know and have tested in Linux, this
change only affects the `WiimoteScannerLinux` backend. It's likely that it could be added
to other backends, but I'm unfamiliar with these.
If no addresses are given or this config section does not exist, behavior is completely
unchanged.
Introduce a new "Enable Time Tracking" checkbox in the InterfacePane UI. The checkbox is dynamically enabled or disabled based on the emulation state, preventing changes while emulation is active.
Creates TimePlayed class and implemented constructors, AddTime, GetTimePlayed, and Reload methods. Updates CMakeLists.txt and DolphinLib.props as appropriate.
I think someone confused these with the actual token and bounding box
registers in PE, which were added later. In CP they never did anything
and it's suspicious that they have the same addresses as their PE
counterparts. On real hardware they always read as zero.
Move ImGui::End() calls out of if(ImGui::Begin()) blocks.
Quoting from ImGui::Begin's function comment in imgui.cpp:
"You always need to call ImGui::End() even if false is returned."
In practice this didn't cause problems because the windows don't have
title bars and thus can't be collapsed, and so the block containing
::End would always run, but let's do it the right way.
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
We exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00218 mov w24, #0x100000 ; =1048576
0xcb180379 sub x25, x27, x24
After:
0xd1440379 sub x25, x27, #0x100, lsl #12 ; =0x100000
You can encode a 12-bit immediate in a SUB instruction on ARM64. We can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x5280003a mov w26, #0x1 ; =1
0xcb1a033b sub x27, x25, x26
After:
0xd100073b sub x27, x25, #0x1
While we cannot always avoid materializing immediates, we can still
inspect the most significant bit and potentially skip sign extension.
This can sometimes save an instruction.
Before:
0x5280003a mov w26, #0x1 ; =1
0x93407f5b sxtw x27, w26
0xcb38c37b sub x27, x27, w24, sxtw
After:
0x5280003a mov w26, #0x1 ; =1
0xcb38c35b sub x27, x26, w24, sxtw
Before:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb38c339 sub x25, x25, w24, sxtw
After:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb180339 sub x25, x25, x24
You can encode a shifted 12-bit immediate in an ADD instruction on
ARM64. If the negated constant fits in this range, we can exploit this
to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52bff01a mov w26, #-0x800000 ; =-8388608
0x93407f1b sxtw x27, w24
0xcb3ac37b sub x27, x27, w26, sxtw
After:
0x93407f1b sxtw x27, w24
0x9160037b add x27, x27, #0x800, lsl #12 ; =0x800000
You can encode a 12-bit immediate in an ADD instruction on ARM64. If the
negated constant fits in this range, we can exploit this to avoid
materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x12800019 mov w25, #-0x1 ; =-1
0x93407f5b sxtw x27, w26
0xcb39c37b sub x27, x27, w25, sxtw
After:
0x93407f5b sxtw x27, w26
0x9100077b add x27, x27, #0x1
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00099 mov w25, #0x40000 ; =262144
0x93407f7a sxtw x26, w27
0xcb39c35a sub x26, x26, w25, sxtw
After:
0x93407f7a sxtw x26, w27
0xd141035a sub x26, x26, #0x40, lsl #12 ; =0x40000
You can encode a 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52800416 mov w22, #0x20 ; =32
0x93407f78 sxtw x24, w27
0xcb36c318 sub x24, x24, w22, sxtw
After:
0x93407f78 sxtw x24, w27
0xd1008318 sub x24, x24, #0x20
A number of settings in the `debugger` group were wrongly using a newly
constructed `QSettings` object instead of the singleton object that
`GetQSettings()` provides.
This made the application create a spurious, extra configuration file in
the user directory:
```
~/.config/Dolphin Emulator/dolphin-emu.conf
```
Notice that, by default, the application configuration files are stored
in `~/.config/dolphin-emu`; not in `~/.config/Dolphin Emulator`.
Adding a community-requested list of Gecko and Action Replay codes to the allowlist. Many of these codes were from the wiki and are being added to Dolphin's repo for the first time.
Change the displayed controls in the TAS Input window when the
controller's extension (including MotionPlus) is changed.
This previously required restarting Dolphin after the attachment was
changed, as the controls were never updated after the WiiTASInputWindow
was created at Dolphin startup.
When I wrote 71e9766519, there was an interaction I didn't take into
account: When setting eq, SetCRFieldBit assumes that all bits in the
passed-in host register except the least significant bit are 0. But if
we use EON or ORN, all bits except the least significant bit get set to
1. This can cause eq to end up unset when it should be set.
This commit fixes the issue.
crandc is unaffected by the issue because the "1" bits get ANDed with
"0" bits from the first operand.
Note that in practice, we never have both bits_1_to_31_are_set and
negate at once, so while it looks like this commit adds an extra AND
instruction in some cases, those cases don't happen in practice, meaning
this fix shouldn't affect performance.
QCheckBox::toggled and other similar signals are used to save changes and to update widget status (such as enabled).. OnConfigChanged needs to load new values and trigger widget updates, but the new value shouldn't trigger a save. A save is unnecessary (the config has the correct values and the UI is being updated to those values) and it'd trigger another ConfigChanged signal. This commit blocks the save without blocking the signal entirely.
The computed value is only used when the register is equal to zero, so
we can fully precompute it and materialize the constant instead. In
other words, we change from
```
return reg == 0 ? (reg | 1ULL << 63) : reg;
```
to
```
return reg == 0 ? 1ULL << 63 : reg;
```
The number of instructions remains the same, but we eliminate an
unnecessary dependency on the register value.
Before:
0xb241037a orr x26, x27, #0x8000000000000000
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
After:
0xd2f0001a mov x26, #-0x8000000000000000 ; =-9223372036854775808
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
In NandPaths.cpp, the `std::initializer_list<char>` of illegal characters has been turned into a `char[]` (similar to the one in GameList.cpp).
The reverse iteration in ResourcePack.cpp seemed to provide no benefits, and doing without it it seemed to have no ill effects.
The new `Common::Contains` and `Common::ContainsSubrange` function objects mirror C++23's `std::ranges::contains` and `std::ranges::contains_subrange`, respectively.
Recently there was some issues in TASVideos trying to sync a Donkey Kong Country Returns TAS. It eventually was synced by directly using the config from the TAS author. The exact setting which caused the desync was narrowed down to being in SYSCONF, with the country code. The TAS author lives in the US, so the country code matched the US country code, while the person attempting to sync the TAS did not live in the US.
Adding SYSCONF country code to the DTM should avoid this being an issue for future Dolphin versions.
When the input register and carry flags are known, we can always
precompute the result.
We still materialize the immediate when the condition register
needs to be updated, but this seems to be a general problem. I might
look into that one day, but for now this'll do.
- ConstantFalse
Before:
0x52800119 mov w25, #0x8 ; =8
0x2a1903fa mov w26, w25
After:
N/A
- ConstantTrue
Before:
0x52800119 mov w25, #0x8 ; =8
0x1100073a add w26, w25, #0x1
After:
N/A
Same optimization we did for subfex. Skip loading the carry flag into a
temporary register first when we're dealing with zero.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
When both the input register and the carry flag are constants, the
result can be precomputed.
Before:
0x52800016 mov w22, #0x0 ; =0
0x2a3603f6 mvn w22, w22
After:
The result is either -1 or 0 depending on the state of the carry flag.
This can be done with a csetm instruction.
Before:
0x1280001a mov w26, #-0x1 ; =-1
0x1a1f035a adc w26, w26, wzr
After:
0x5a9f23fa csetm w26, lo
When the immediate is zero, we can load the carry flag from memory
directly to the destination register.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
Resolves duplicate OSD messages for Loading and Found custom textures.
VideoBackend initialization results in HiresTexture::Init being called.
We already call HiresTexture::Update when OnNewTitleLoad is called.
Thus we can remove HiresTextures::Init completely as it is redundant.
All valid PPC imm masks (except for all zeroes and all ones) are also
valid AArch64 imm masks. This lets us optimize things a little.
Note that because I'm now ANDing rS before rotating it, its AND mask
is rotated left. All AArch64 imm masks can be rotated by any amount and
still be valid AArch64 imm masks.
No games seem to use this, so this isn't useful as a performance
optimization, but it's required for correctness because the (sh == 0)
case of our implementation doesn't handle zero masks.
