https://bugs.dolphin-emu.org/issues/12977 indicates that this happens on startup of Spider-Man 2, even in single-core. I don't have the game, so I can't directly determine why this is happening, but presumably real hardware does not hang in this case, so we can make it less obtrusive.
I'm not sure what the XMM0 check was supposed to be, but the 0xCC008000 one is for the fifo and is handled elsewhere now (look for `optimizeGatherPipe`).
Looks like a copy-paste gone wrong. The compute shaders for the other
formats use a group size of 8 * 8, whereas the CMPR compute shader
is supposed to use a flattened 64 * 1 as I understand it.
We currently have two different code paths for initializing controllers:
Either the frontend (DolphinQt) can do it, or if the frontend doesn't do
it, the core will do it automatically when booting. Having these two
paths has caused problems in the past due to only one frontend being
tested (see de7ef47548). I would like to get rid of the latter path to
avoid further problems like this.
The movie config layer is not active for recording, only playback. Thus, recording ends up stuck with default SYSCONF settings.
The fix is simply to add in the movie config layer when recording. The way it's done is a bit hacky, but seems to work.
This struct is the only one in BPMemory that uses u64 as its base. These fields are to allow viewing it as two u32s instead. It's not used by Dolphin right now, but it is used in the copy of BPMemory.h used by hwtests.
This also changes the behavior for the invalid gamma value, which was confirmed to behave the same as 2.2.
Note that currently, the gamma value is only used for XFB copies, even though hardware testing indicates it also works for EFB copies. This will be changed in a later commit.
The only remaining casts for these types that I know of are in TextureInfo (where format_name is set to the int version of the format, and since that affects filenames and probably would break resource packs, I'm not changing it) and in TextureDecoder_Common's TexDecoder_DrawOverlay, which will be handled separately.
Adds a pass to process driver deficiencies between UID caching and use, allowing a full view of the whole pipeline, since some bugs/workarounds involve interactions between blend modes and the pixel shader
Before, Free Look would accept background input by default, which means it was easy to accidentally move the camera while typing in another window. (This is because HotkeyScheduler::Run sets the input gate to `true` after it's copied the hotkey state, supposedly for other threads (though `SetInputGate` uses a `thread_local` variable so I'm not 100% sure that's correct) and for the GBA windows (which always accept unfocused input, presumably because they won't be focused normally).
If a 64-bit register is passed to WriteConditionalExceptionExit,
the LDR instruction in it will read too much data. This seems
to be harmless right now, but causes problem in one of my PRs.
Heavily simplify logical immediate encoding.
This is based on the observation that if a valid repeating element
exists, it repeats through `value`. Thus it does not matter which
one you analyse. Thus we skip over the least significent element
if LSB = 1 by masking it out with `inverse_mask_from_trailing_ones`,
to avoid the degenerate case of a stretch of 1 bits going 'round
the end' of the word.
This should reduce (but not completely eliminate) gradual audio desyncs in dumps. This also allows for accurate sample rates for the GameCube.
Completely eliminating gradual audio desyncs will require resampling to an integer sample rate, as nothing seems to support a non-integer sample rate.
These values were obtained by setting a breakpoint at a game's entry point, and then observing the register values with Dolphin's register widget.
There are other registers that aren't handled by this PR, including CR, XER, SRR0, SRR1, and "Int Mask" (as well as most of the GPRs). They could be added in a later PR if it turns out that their values matter, but probably most of them don't.
This fixes Datel titles booting with the IPL skipped (see https://bugs.dolphin-emu.org/issues/8223), though when booted this way they are currently missing textures. Due to somewhat janky code, Datel overwrites the syscall interrupt handler and then immediately triggers it (with the `sc` instruction) before they restore the correct one. This works on real hardware due to icache, and also works in Dolphin when the IPL runs due to icache, but prior to this change `HID0.ICE` defaulted to 0 so icache was not enabled when the IPL was skipped.
DSPHLE::Initialize sets the halt and init bits to true (i.e. m_dsp_control.Hex starts as 0x804), which is reasonable behavior (this is the state the DSP will be in when starting a game from the IPL, as after `__OSStopAudioSystem` the control register is 0x804).
However, CMailHandler::m_halted defaults to false, and we only call CMailHandler::SetHalted in DSPHLE::DSP_WriteControlRegister when m_dsp_control.DSPHalt changes, so since DSPHalt defaults to true, if the first thing that happens is writing true to DSPHalt, we won't properly halt the mail handler.
Now, we call CMailHandler::SetHalted on startup. This fixes Datel titles when the IPL is skipped with DSP HLE (though this configuration only works once https://bugs.dolphin-emu.org/issues/8223 is fixed).
This fixes booting Datel titles with DSPHLE (see https://bugs.dolphin-emu.org/issues/12943). Datel messed up their DSP initialization code, so it only works by receiving a mail later on, but if halting isn't implemented then it receives the mail too early and hangs.
It's cleared whenever the uCode changes, so there's no reason to clear it in a destructor or during initialization.
I've also renamed it to ClearPending.
The # option means that 0x is prepended already, so the old code resulted in 0x0xDEADBEEF instead of the intended 0xDEADBEEF. WriteMailboxLow was already correct.
Before, both 1441 and 147f would disassemble as `lsr $acc0, #1`, when the second should be `lsr $acc0, #-1`, and both 14c1 and 14ff would be `asr $acc0, #1` when the second should be `asr $acc0, #-1`. I'm not entirely sure whether the minus signs actually make sense here, but this change is consistent with the assembler so that's an improvement at least.
devkitPro previously changed the formatting to not require negative signs for lsr and asr; this is probably something we should do in the future: 8a65c85c9b
This fixes the HermesText and HermesBinary tests (HermesText already wrote `lsr $ACC0, #-5`, so this is consistent with what it used before.)
For instance, ending with 0x009e (which you can do with CW 0x009e) indicates a LRI $ac0.m instruction, but there is no immediate value to load, so before whatever garbage in memory existed after the end of the file was used.
The bounds-checking also previously assumed that IRAM or IROM was being used, both of which were exactly 0x1000 long.
Spirv-cross's MSL codegen makes the amazing choice of compiling calls to inout functions as `State temp = s; call_function(temp); s = temp`. Not all Metal backends handle this mess well. In particular, it causes register spills on Intel, losing about 5% in performance.
X30 is used in fewer situations than the comment was claiming.
(I think that when I wrote the comment I was counting the use of X30
as a temp variable in the slowmem code as clobbering X30, but that
happens after pushing X30, so it doesn't actually get clobbered.)
This is used when fastmem isn't available. Instead of always falling
back to the C++ code in MMU.cpp, the JIT translates addresses on its
own by looking them up in a table that Dolphin constructs. This is
slower than fastmem, but faster than the old non-fastmem code.
This is primarily useful for iOS, since that's the only major platform
nowadays where you can't reliably get fastmem. I think it would make
sense to merge this feature to master despite this, since there's
nothing actually iOS-specific about the feature. It would be of use
for me when I have to disable fastmem to stop Android Studio from
constantly breaking on segfaults, for instance.
Co-authored-by: OatmealDome <julian@oatmealdome.me>
This hack was added in 8f0cbefbe5, and the part of it in SI_DeviceGCAdapter is present on Android already, so I don't see any reason why this part doesn't apply to Android.
This is mostly a brainless merge, #ifdef-ing anything that doesn't match between the two while preserving common logic. I didn't rename any variables (although similar ones do exist), but I did change one log that was ERROR on android and NOTICE elsewhere to just always be NOTICE. Further merging will follow.
Instead, saturate in OpReadRegister, as all uses of OpReadRegisterAndSaturate called OpReadRegister for other registers (and there isn't anything that writes to $ac0.m or $ac1.m without saturation).
Loading configs while another thread is messing with stuff just doesn't feel like a good idea
Hopefully fixes Wiimote Scanning Thread crashes on startup
There were 3 bugs here:
- The input register for the full register wasn't actually being used; it was read into RCX but RCX wasn't used by Update_SR_Register16_OverS32 (except as a scratch register). The way the DSP LLE recompiler uses registers is in general confusing, so this commit changes a few uses to have a variable for the register being used, to make code a bit more readable. (Default parameter values were also removed so that they needed to be explicitly specified).
- Update_SR_Register16 was doing a 64-bit test, when it should have been doing a 16-bit test. For the most part this doesn't matter due to sign-extension, but it does come up with e.g. `ORI` or `ANDI`.
- Update_SR_Register16_OverS32 did the over s32 check, and then called Update_SR_Register16. Update_SR_Register16 masks $sr with ~SR_CMP_MASK, clearing the over s32 bit. Now the over s32 check is performed after calling Update_SR_Register16 (without masking a second time). No official uCode cares about the over s32 bit.
We don't have anything called $amD, though we do have $acsD. However, these instructions affect flags based on the whole accumulator, so it's better to just use $acD.
For more information, ApplyWriteBackLog, WriteToBackLog, and ZeroWriteBackLog were added in b787f5f8f7 and the explanatory comment was added in fd40513fed, although it did not mention the specific instructions that could trigger this edge case. The statements about which registers can be written by main opcodes and extension opcodes are based on my own checking of all instructions in the manual.
It's been unused since DolphinWX was removed in 44b22c90df. Prior to that, it was used in Source/Core/DolphinWX/NetPlay/NetWindow.cpp. But the new equivalent in Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp uses NetPlayClient::GetPlayers instead. Stringifying (or creating a table, as is done now) should be done by the UI in any case.
Among other things, this trims trailing newline characters. Before (on windows) the \r would corrupt the output and make them very hard to understand (as the error message would be drawn over the code line, but part of the code line would peek out from behind it).
Ninja puts way more effort into compiling targets in parallel, and
ignores dependenceis until link time.
So we need to jump though hoops to force ninja to compile
pch.cpp before any targets which depend on the PCH.
I have no idea why cmake supports PUBLIC on target_sources,
but it does. It causes all targets that depend on this target
to try and include the files in their sources.
Except it doesn't take paths into account, so it breaks. Mabye
it would work if you used an abolute source? But I'm not sure
there is a sane usecase.
Page faults should only occur on architectures that support exception
handlers, so skip the test on other architectures to avoid spurious test
failures.
... and refresh the config before populating the backend info, as the config (specifically iAdapter) needs to be set to correctly populate the backend info.
Before, the list of valid antialiasing modes was always determined from the first adapter on the list on startup, regardless of the adapter the user selected.
This results in the list of available antialiasing modes being updated; before, it would only show the modes available for the adapter that was selected when the graphics window was opened (or the backend was last changed).
The list of available modes is updated by `GraphicsWindow::OnBackendChanged`'s call to `VideoBackendBase::PopulateBackendInfoFromUI`, and then `EnhancementsWidget::LoadSettings` updates the UI. Both of these are connected to the `GraphicsWindow::BackendChanged` signal.
On GameCube, a ramp bit has no effect if its corresponding channel is
inactive. On Wii however, enabling just the ramp implicitly also enables
the channel. AXSetVoiceMix() never does that, so this commit should have
no impact on games unless they fiddle with the mixer control value
directly.
This refactorization is done just to match the order that I made
WriteToHardware use in 543ed8a. For WriteToHardware, it's important that
things like MMIO and gather pipe are handled before we reach a special
piece of code that only should get triggered for writes that hit memory
directly, but for ReadFromHardware we don't have any code like that.
This fixes a problem where Dolphin could crash if a non-translated
read crossed the end of a physical memory region.
The same change was applied to WriteToHardware in ecbce0a.
This more accurately represents what's going on, and also ends at 0 instead of 1, making some indexing operations easier. This also changes it so that position_matrix_index_cache actually starts from index 0 instead of index 1.
(Specifically, the copy for VertexLoaderManager::position_cache. The position matrix index happens elsewhere, and the float path still has special logic to copy to scratch3.)
This increases accuracy, fixing the white rendering in Major Minor's Majestic March. However, the hardware backends can only have one viewport and scissor rectangle at a time, while sometimes multiple are needed to accurately emulate what is happening. If possible, this will need to be fixed later.
I think this is a relic of D3D9. D3D11 and D3D12 seem to work fine without it. Plus, ViewportCorrectionMatrix just didn't work correctly (at least with the viewports being generated by the new scissor code).
These aren't particularly useful, and make the code a bit more confusing. If for some reason someone wants to test what happens when these functions are disabled, it's easier to just edit the code that implements them. They aren't exposed in the UI, so one would need to restart Dolphin to do it anyways.
I am not confident there are no race conditions between s_write_mutex,
s_controller_write_payload_size, and s_controller_write_payload. But
this code should be safer than before.
s_controller_write_payload_size needs to remain an atomic because Read()
loads and stores without holding a mutex, Output() stores while holding
s_write_mutex, and ResetRumble() stores while holding s_read_mutex! I'm
pretty sure this code is wrong, specifically ResetRumble().
You can safely read or write non-atomic integers on multiple threads,
as long as every thread reading or writing it holds the same mutex
while doing so (here, s_mutex).
Removing the atomic accesses makes the code faster, but the actual
performance difference is probably negligible.
Add Diff button to CodeWidget
Add Code Diff Tool window for recording and differencing functions. Allows finding specific functions based on when they run.
This was requested by a forum user, and I thought why not.
It's a simple change to make since DiscIO already supports it,
and I assume command-line users know roughly what they're doing.
New dolphin-tool command: "header"
-b / --block_size
-c / --compression
-l / --compression_level
Informative RVZ/WIA header2 value "compression_level" is now a s32 instead of a u32, because negative compression is a thing.
Speaking of, it is now possible to use negative compression levels in dolphin-tool's convert command (not the GUI, though).
Turns out there's some Freeloader disc for the GC that triggers this
despite being a good dump. This warning is mostly intended to catch
Wii games that have been truncated at the 4.00 GiB or 4.38 GiB mark
anyway, and if someone does have a Datel dump that has been truncated,
they'll still get the "unusual size" warning.
If libusb fails to initialize, an assertion fails, but if that happens before the main window is created, then Dolphin just dies. Now, the panic alert is properly shown and the user can ignore it.
These messages hid other, more important, ones often. I have left AttemptMaxTimesWithExponentialDelay and GetSysDirectory/SetSysDirectory as info, since those are called infrequently and can be useful to the end-user.
This message would be logged, usually multiple times, for EVERY. SINGLE. PIXEL. That's pretty much useless and just makes the log unreadable. Plus, the current support (which acts as RGB8) is close enough that for end-user purposes, it's fine. I don't think the hardware backends support RGB565_Z16 and its antialiasing functionality correctly either, but they don't have similar logspam.
Previously we were using this workaround when using framebuffer fetch
to emulate dual source blending, but it seems like we also need to use
it when using framebuffer fetch to emulate logic ops, otherwise some
Adreno devices get a crash when compiling OpenGL ES ubershaders.
Using the workaround in specialized shaders doesn't seem to be
necessary, but I've made the same change there for consistency.
This gets us closer to fixing https://bugs.dolphin-emu.org/issues/12791
but doesn't actually fix it.
On devices which have hardware support for dual source blending
but not logic ops, this lets us skip performing the framebuffer
fetch in situations where the game isn't actually using logic ops.
Currently, the axes for the main and C sticks range from 0-255, with
128 being the mid-point; but this isn't symmetrical: the negative axis
has 128 values not including 0, while the positive axis has 127 values
not including 0.
Normalizing so that the range is 1-255 makes the positive and negative
axes symmetrical. The inability to yield 0 shouldn't be an issue as a
real GC controller cannot yield it anyway.
I.e. flush pokes before running an EFB peek, if the cache tile isn't present. If the cache tile is present, then EFB pokes should have been written to the cache tile and thus don't need to be flushed.
This saves the GUI from having to manually call SDIO_EventNotify.
With that out of the way, we can let users change the
"Insert SD Card" setting on Android while a game is running.
Previously, when Pause at End of Movie was disabled, the game would continue running as it should, but the menu bar would think the game was paused, showing the play button instead of the pause button. To make things worse, clicking the play button would then restart the game, instead of pausing or doing nothing. F10 paused/unpaused as normal, though.
The old behavior was essentially to enable stepping/pause mode (via `CPU::Break()`) and then if Pause at End of Movie was disabled, to un-pause on the host thread (via `CPU::EnableStepping(false)`). For reasons which aren't entirely clear to me, the first one notified the menu bar (through the `Host::UpdateDisasmDialog` callback, not the `Settings::EmulationStateChanged` one), and the second did not. In any case, this approach does not particularly make sense; I don't see any reason to pause and unpause if Pause at End of Movie is disabled; instead, we should only pause when Pause at End of Movie is enabled.
This behavior was probably introduced in c1944f623b, though I haven't tested it.
directly_mapped_vars was added in #69 (4129b30494), but for some reason FIFO_BP_LO/HI were split out from it in in #885 (65af90669b). As far as I can tell, this code (and the code that existed at the time) is identical, so there's no reason to have it handled separately.
In a code block where a guest register is accessed at least twice and the
last access is a write and the register is not discardable immediately
after the second-to-last instruction (perhaps there is an instruction
in between that can cause an exception), currently Dolphin's JITs will
flush the register after the second-to-last instruction.
It would be better if we replaced the flush after the second-to-last
instruction with a flush that only happens if the exception path is
taken. This change accomplishes that by marking guest registers as
"in use" not just when they are used as inputs but also when they are
used as outputs, preventing the loop in DoJit from flushing the
register until after the last access.
This makes codegen faster (by perhaps 10-20% in the case of Jit64,
I didn't measure too closely), which helps speed up NBA Live 2005
a little. But the game still has serious performance issues.
The DSP JIT only applies on x64, so if it doesn't work on esoteric compilers then that's not a problem. (And if it fails to compile, then it'll still produce an error on that platform, just no warnings on other platforms)
The size variable started to be unused when I created std::array variants of ReadArray, but we should follow it in case any files have fewer registers stored than they should (otherwise the remaining registers would end up with garbage data from later in the fifolog). Though, there probably aren't many fifologs where this is relevant.
Large amounts of logging can have an impact on performance, so moving the ones that have been determined to not matter to the warn level gives a way to hide those messages without hiding actual errors (and also gives a fast visual way of distinguishing between ignored and non-ignored ones due to the different colors).
Fixes https://bugs.dolphin-emu.org/issues/12827.
A description of what was going wrong:
JitArm64::Init first calls CodeBlock::AllocCodeSpace, after which
CodeBlock and Arm64Emitter consider us to have 96 MB of code space
available. JitArm64::Init then calls AddChildCodeSpace, which is
supposed to take 64 MiB of that space and give it to m_far_code.
CodeBlock's view of how much space there is gets updated from 96 MiB
to 32 MiB, but due to the missing call, Arm64Emitter keeps thinking
that it has 96 MiB of space available.
The last thing JitArm64::Init does is to call ResetFreeMemoryRanges.
This function asks Arm64Emitter how much code space is available and
stores a range of that size in m_free_ranges_near, meaning that
m_free_ranges_near ends up being backed by both nearcode and farcode!
This is a ticking time bomb; as soon as we grab memory from
m_free_ranges_near which is backed by farcode, we're in trouble.
The crash I ran into in my testing was caused by fastmem code being
allocated in farcode (our backpatch handler only handles accesses made
from nearcode), but you may as well get errors caused by code intended
for nearcode overwriting code intended for farcode or vice versa.
So why did NBA Live 2005 crash when most games had no problems,
and why was the bug bisected to the commit that increased the size
of far code from 16 MiB to 64 MiB? Well, as long as we're only
using the first 32 MiB of the big 96 MiB range, everything works.
What happens with NBA Live 2005 (I have not investigated exactly
through what mechanism this happens) is that at some point the range
in m_free_ranges_near gets split into two ranges, one which is
backed by nearcode and one which is backed by farcode. Dolphin
prefers to select the biggest range available (we don't want to
pick a tiny 1 KiB range that may not be able to fit the whole block
we're about to emit, after all), and after increasing the size of
farcode to 64 MiB, farcode is bigger than nearcode.
It doesn't make sense for alpha to add the bias ONLY when dividing by 2, while color doesn't apply the bias for divide by 2 only; hardware testing indicates that alpha should have the bias.
This fixes the menus in Mario Kart Wii (https://bugs.dolphin-emu.org/issues/11909) but reintroduces the white rectangle in Fortune Street.
This reverts commit 5aaa5141ed (and several other matching changes elsewhere).
Turning off primitive restart increases performance a lot on
Adreno for some reason. We're talking numbers like 50%-100% faster
in situations which are bottlenecked by rendering.
* Disabled: disables the overlay pointer
* Follow: default behaviour, IR pointer follows touch position
* Drag: IR pointer moves relative to the initial touch event position
At least in GLSL, after calling EmitVertex() the value of all 'out' variables (including gl_Layer and ps) becomes undefined. On OpenGL it seems like they were unchanged, but on Vulkan they became 0, resulting in bad rendering.
Fixes https://bugs.dolphin-emu.org/issues/12001
Currently, disabling mGBA when building gets rid of the ability to
change the GBA saves directory in DolphinQt, but it doesn't actually
get rid of Dolphin loading and storing the setting and creating the
folder. If the setting is set to a path you don't want to use
(perhaps you are trying to turn Dolphin portable), this is annoying.
To avoid accidentally making mistakes like this in the future,
I'm gating the existence of the setting behind an ifdef.
DiscIO depends on some IOS functions and other functions, which are in Core and not Common. This results in link errors if using DiscIO on its own (which is why DolphinTool had a listed dependency on videocommon; videocommon has a dependency on core so adding that made things build).
Fixes a crash that could occur if the static constructor function for
the MainSettings.cpp TU happened to run before the variables in
Common/Version.cpp are initialised. (This is known as the static
initialisation order fiasco.)
By using wrapper functions, those variables are now guaranteed to be
constructed on first use.
If the purpose of calling SetFullscreen using RunAsCPUThread is
to make sure that the GPU thread is paused, the fix in ef77872
is faulty when dual core is used and a panic alert comes from
the CPU thread. This change re-adds synchronization for that case.
The fix in ef77872 worked for panic alerts from
the CPU thread, but there were still problems with
panic alerts from the GPU thread in dual core mode.
This change attempts to fix those.
Using unsigned char* or signed char* results in a deprecation warning, which is treated as an error. It needs to be casted to regular char* for it to work.
At least in MSVC (which is not restricted from targetting C++20), these can be resolved to either std::format_to or fmt::format_to (though I'm not sure why the std one is available). We want the latter.
This format string is by definition dynamic and can't be checked at compile time. There are other similar strings in the log handler and in asserts, but they use vformat and thus don't need fmt::runtime. We might be able to do a similar thing where the untranslated string is compile-time checked, but FmtFormatT is used in so few places that I don't want to handle that in this PR.
This syntax is allowed by GLSL, but HLSL doesn't allow it. This meant that games using R8 comparisons in equal mode would produce shaders that failed to compile. Super Mario Galaxy's water levels were affected by this.
This matches BootManager.cpp's old behavior.
Note: The other settings of the "Controls" section (WiimoteSource
and WiimoteSourceBB) are still handled in BootManager.cpp.
The "DSP" game INI section name was supported by BootManager.cpp
before the section was ported to the new config system.
For backwards compatibility, we should keep supporting it.
Should fix https://bugs.dolphin-emu.org/issues/12792
HRWrap now allows HRESULT to be formatted, giving useful information beyond "it failed" or a hex code that isn't obvious to most users. This commit does not add any uses of it, though.
This option has always existed since it's used by FifoCI, but now it can be changed at runtime. Looping is something that should almost always be on, but it can be useful to turn it off when frame-dumping is enabled so that hundreds of copies of the same frame aren't created. Before, turning it off required restarting Dolphin.
This extends the timeout to 30 seconds, so users who have brief
connection issues won't be so swiftly disconnected, allowing the
NetPlay session to continue.
Now, enums are properly displayed, and BitFieldArray is also displayed nicely. Signed values also work correctly, and 1-bit fields are not treated as bools unless the bitfield is explicitly marked as a bool.
These tends to get requested from either pure GDB or Ghidra. They reduce the verbosity of the communications. The QSupported packet is also important to implemnent for future proofing too.
The stub was made with the assumption that the GDB architecture is rs6000:6000, but the closest is actually powerpc:750 which features much more SPR that the gekko supports, but it also has slightly different ID. This commit now assumes the more proper powerpc:750.
We don't use sampler2DMS, but we do use sampler2DMSArray.
I can't reproduce it on my phone, but a user who was running GLES
on a Tegra X1 reported a shader compilation error related to this.
Mainly concerns to building with Ninja, as that's what I tested it with.
Originally it would only prepend the first path with `/external:I`,
however all paths in the list have to be prepended with `/external:I`.
The MS documentation seems to support this, as it makes no mention of it
accepting a list.
This is probably the worst way to implement this, I am unfamiliar with
CMake.
It's always a good sign when the comments say "this will definitely
crash" and "I don't know if this is for a good reason".
Fixes https://bugs.dolphin-emu.org/issues/12762.
These GetPointer calls could cause crashes, in part because the
callers didn't do null checks and in part because GetPointer
inherently is unsafe to use for accesses larger than 1 byte.
The actual values don't matter since we overwrite all of the relevant fields, but other bits were not initialized (e.g. the top 12 bits of X10Y10), so the warning was semi-valid.
This piece of code is rather hard to understand, but my best guess
at what it's trying to do is that it tries to create opportunities
to skip writing CRs back to ppcState if we know that there are no
CR instructions (or branch instructions, etc) between an instruction
that writes to a CR register and the next blr. This is technically
inaccurate emulation, but as long as games don't do anything too
weird with their ABIs, I suppose it doesn't break anything.
So why do I want to get rid of it? Well, other than breaking some
hypothetical weird game, I imagine it could trip up people trying
to debug a game who are looking at the CR contents. And the code
is just plain confusing. (blr clearly doesn't write to CRs!)
Videocommon also depends on core, which resulted in linking errors (though I'm not sure why). Ideally, dolphintool woudln't depend on videocommon... but some stuff in core does.
Previously, EFB copies would be in the middle of other objects, as objects were only split on primitive data. A distinct object for each EFB copy makes them easier to spot, but does also mean there are more objects that do nothing when disabled (as disabling an object only skips primitive data, and there is no primitive data for EFB copies).
This also adds the commands after the last primitive data but before the next frame as a unique object; this is mainly just the XFB copy. It's nice to have these visible, though disabling the object does nothing since only primitive data is disabled and there is no primitive data in this case.
It became irrelevant in 952dfcd610, when the define was removed; now, the code the comment is referring to is in JitRegister.cpp, and oprofile is controlled by cmake.
My change in 867cd99 caused farcode to fill up much more than before.
Most games still ran fine, but certain games would have multiple
cache clears per minute, on top of being overall slow.
Maybe there's something prettier we can do about this than just
allocating more RAM, but we have the resource budget for making
Dolphin use more RAM, so I consider increasing the size of the
cache to be a good solution at least for the time being.
At least for Prince of Persia: The Forgotten Sands, 48 MB isn't
enough to stop the cache clears, but 64 MB is. (I only played the
game for a few minutes when testing, though.)
To do this, I had to decouple framebuffer fetch from shader blending. We need to be able to access framebuffer fetch input when using shader logic ops.
If InputConfig::LoadConfig() was called once with a non empty/customized config,
then called again after manually deleting the config (dolphin calls LoadConfig() every time it opens the mapping widget),
the second load would fail to clear the values on any non first EmulatedController and would instead keep the
previous config values despite it being deleted (while it would instead correctly default the first EmulatedController).
This is not a big bug though the code is better now.
Fixes bug: https://bugs.dolphin-emu.org/issues/12744
Before e1e3db13ba
the ControllerInterface m_devices_mutex was "wrongfully" locked for the whole Initialize() call, which included the first device population refresh,
this has the unwanted (accidental) consequence of often preventing the different pads (GC Pad, Wii Contollers, ...) input configs from loading
until that mutex was released (the input config defaults loading was blocked in EmulatedController::LoadDefaults()), which meant that the devices
population would often have the time to finish adding its first device, which would then be selected as default device (by design, the first device
added to the CI is the default default device, usually the "Keyboard and Mouse" device).
After the commit mentioned above removed the unnecessary m_devices_mutex calls, the default default device would fail to load (be found)
causing the default input mappings, which are specifically written for the default default device on every platform, to not be bound to any
physical device input, breaking input on new dolphin installations (until a user tried to customize the default device manually).
Default devices are now always added synchronously to avoid the problem, and so they should in the future (I added comments and warnings to help with that)
This fixes the bad rendering on the first frame when using the software renderer: the software renderer's Z buffer started out at 0, but most games clear it to 0xffffff instead; this means that things don't render correctly except for in the regions where the screen was cleared by an EFB copy earlier in the frame.
The system menu does clear the RTC flags, but we currently aren't updating the cache file, and since we clear them the system menu doesn't know to update the cache either. This means that launching a game via the system menu, and then launching a game directly and exiting via HOME will result in the system menu using an outdated cache and displaying the old game. This causes it to fail to launch the game on the disc channel (since it doesn't match the cache), resulting in it resetting (though it will ignore the cache after resetting). Not clearing the cache avoids this issue.
PNG_FORMAT_RGB and PNG_COLOR_TYPE_RGB both evaluate to 2, but PNG_FORMAT_RGBA evaluates to 3 while PNG_COLOR_TYPE_RGBA evaluates to 6; the bit indicating a palette is 1 while the bit indicating alpha is 4.
Fixes Bomberman Jetters in single core mode.
When single core mode pauses the CPU to execute the GPU
FIFO it greedily executes the whole thing. Before this commit,
Finish and Token interrupts would happen instantly, not even
taking into account how long the current FIFO window has
taken to execute. The interrupts would be effectively backdated
to the start of this execution window.
This commit does two things: It pipes the current FIFO window
execution time though to the interrupt scheduling and it enforces
a minimum delay of 500 cycles before an interrupt will be fired.
Being able to preserve the address register is useful for the
next commit, and W0 is the address register used for loads. Saving
the address register used for stores, W1, was already supported.
If a host register has been newly allocated for the destination
guest register, and the load triggers an exception, we must make
sure to not write the old value in the host register into ppcState.
This commit achieves this by not marking the register as dirty
until after the load is done.
This does this following things:
- Default to the runtime automatic number of threads for pre-compiling shaders
- Adds a distinct automatic thread count computation for pre-compilation (which has less other things going on
and should scale better beyond 4 cores)
- Removes the unused logical_core_count field from the CPU detection
- Changes the semantics of num_cores from maximaum addressable number of cores to actually available CPU cores
(which is also how it was actually used)
- Updates the computation of the HTT flag now that AMD no longer lies about it for its Zen processors
- Background shader compilation is *not* enabled by default
Removed useless locks to DeviceContainer::m_devices_mutex, as they were all already protected by m_devices_population_mutex.
We have no interest in blocking other threads that were potentially reading devices at the same time so this seems fine.
This simplifies the code, and I've adjusted a few comments which mentioned possible deadlock that should now be totally gone.
The deadlock could have happen if a thread directly called EmulatedController::UpdateReferences(), while another another thread also reached EmulatedController::UpdateReferences() within a call to ControllerInterface::UpdateDevices(), as the mentioned function locked both the DeviceContainer::m_devices_mutex and s_get_state_mutex at the same time.
The deadlock was frequent on game emulation startup on Android, due to the UpdateReferences() call in InputConfig::LoadConfig() and the UI thread triggering calls to ControllerInterface::UpdateDevices().
It could also have happened on Desktop if a user pressed "Refresh Devices" manually in the UI while the input config was loading.
Also brought some UpdateReferences() comments and thread safety fixes from https://github.com/dolphin-emu/dolphin/pull/9489
This commit changes the default value of Fast Texture Sampling to true, and also moves the setting that controls it to the experimental section of the advanced tab. This is its own commit so that it can be easily reverted when we want to default to Manual Texture Sampling.
Co-authored-by: JosJuice <josjuice@gmail.com>
Specifically, when using Manual Texture Sampling, if textures sizes don't match the size the game specifies, things previously broke. That can happen with custom textures, and also with scaled EFB copies at non-native IRs. It breaks most obviously by not scaling the texture coordinates (so only part of the texture shows up), but the hardware wrapping functionality also assumes texture sizes are a power of 2 (or else it will behave weirdly in a way that matches how hardware behaves weirdly). The fix is to provide alternative texture wrapping logic when custom texture sizes are possible.
Note that both GLSL and HLSL provide a fwidth (fragment width) function defined as `fwidth(p) = abs(dFdx(p)) + abs(dFdy(p))`. However, it's easy enough to implement this ourselves (and it makes the code a bit more obvious).
The benefit to exposing this over the raw BP state is that adjustments Dolphin makes, such as LOD biases from arbitrary mipmap detection, will work properly.
These messages apply to the User directory regardless of
whether it's global or local, so we shouldn't specify "global".
Also changing "directory" to "folder", just for consistency
with "GC folder" in the same sentence.
We implement this by first rounding to nearest integer using the current
rouding mode, then converting this value from floating point to an integral
value.
Prefer using eax to isolate the sign bit. This saves a byte when the
destination ends up as r8-15, because those require a REX prefix.
Before:
41 8B C5 mov eax,r13d
41 C1 ED 1F shr r13d,1Fh
44 03 E8 add r13d,eax
41 D1 FD sar r13d,1
After:
41 8B C5 mov eax,r13d
C1 E8 1F shr eax,1Fh
44 03 E8 add r13d,eax
41 D1 FD sar r13d,1
This function was deprecated in ffmpeg in January[1], while its
replacement got introduced in 2015[2], so now might be the time to start
using it in Dolphin. :)
[1] f7db77bd87
[2] a9a6010637
This moves the only direct call to zlib’s crc32() into its own
translation unit, but that operation is cold enough that this won’t
matter in the slightest. crc32_z() would be more appropriate, but
Android has an older zlib version…
This was originally intended to fix https://bugs.dolphin-emu.org/issues/12717 but this ended up not being the issue (instead it seems like files just weren't recompiled when imgui was updated due to MSVC weirdness). Still, using brackets instead of quotes is preferable as this is a library include.
The reload stub is at a fixed address (0x80001800) so its hook flag
should be HookFlag::Fixed.
Otherwise the hook is installed by HLE::PatchFixedFunctions but
immediately removed by HLE::PatchFunctions (which is called by
HLE::Reload right after PatchFixedFunctions).
Should fix https://bugs.dolphin-emu.org/issues/12716
This also may eventually allow loading patches from sources other than the 1:1 expected file structure host file system, such as memory or an archive file.
While trying to work on adding audiodump support for CLI, I was alerted that it was important to first try moving the DSP configs to the new config before continuing, as that makes it substantially easier to write clean code to add such a feature.
This commit aims to allow for Dolphin to only rely on the new config for DSP-related settings.
Frame Advance Speed hotkeys were swapped. This likely occurred because speed and delay are inverses (i.e. a speed increase should DECREASE the delay and vice versa).
This replaces the MAX_LOGLEVEL define with a constexpr variable
in order to fix self-comparison warnings in the logging macros
when compiling with Clang. (Without this change, the log level check
in the logging macros is expanded into something like this:
`if (LINFO <= LINFO)`, which triggers a tautological compare warning.)
GCC complains about float_emit being null when inlining
ByteswapAfterLoad into MMIOLoadToReg. ByteswapAfterLoad
does dereference float_emit, but only when passing FLAG_FLOAT,
which MMIOLoadToReg has an assert for and does not support.
Also cleaning up some unnecessarily specified namespaces while
I'm at it.
The compiler was loudly announcing each and every branch Tev was not checking in
a switch statement, but Tev has learned it's lesson and will produce that
warning no more.
Reusing the slowmem handlers of existing blocks meshes badly
with reusing the empty space left when destroying blocks.
I don't think reusing slowmem handlers was much of a gain anyway.
This is done entirely through interpreter fallbacks. It would
probably be possible to implement this using host exception
handlers instead, but I think it would be a lot of complexity
for a rarely used feature, so let's not do it for now.
For performance reasons, there are two settings for this feature:
One setting which does enables just what True Crime: New York City
needs and one setting which enables it all. The latter makes
almost all float instructions fall back to the interpreter.
Instead of having a single GUI checkbox for "Always Hide Mouse Cursor",
I have instead opted to use radio buttons so the user can swap between
different states of mouse visibility. "Movement" is the default
behavior, "Never" will hide the mouse cursor the entire time the game is
running, and "Always" will keep the mouse cursor always visible.
Previously the unhide of movement mouse_timer reset occurred within case MouseButtonPress.
Additionally, there was a redundant expression in the if statement for cursor locking.
Now works with games that deliberately avoid invalidating TMEM because
they know textures are too large to fit:
* Sonic Riders
* Metal Arms: Glitch in the System
* Godzilla: Destroy All Monsters Melee
* NHL Slapshot
* Tak and the Power of Juju
* Night at the Museum: Battle of the Smithsonian
* 428: Fūsa Sareta Shibuya de
There are two reasons for this.
1. Using Dolphin's logging system lets the user decide whether
the printout should go to the terminal, the GUI, or a file.
fmt::print always prints to stdout... unless you're on Android, in
which case it does nothing at all, because Android disables stdout.
2. The Windows version of Dolphin crashes when you use fmt::print.
Yes, really. The crash happens because a call to std::fprint in
fmt::v7::detail::fwrite_fully returns that less characters were
written than requested, which fmt handles by throwing an exception.
(As always, Dolphin does not use exception handling.)
I'm not sure why std::fprint is doing this, but since switching
away from using fmt::print is a good idea due to the previous point
anyway, I'd say it's best to just switch.
Previously, if you have "Hotkeys Require Window Focus" disabled, you could repeatedly use the "Open" hotkey, for example, to stack File Open windows over top of each other over and over.
This commit allows the hotkey manager to disable/enable on QFileDialog creation and destruction.
Currently the logic for addressing the individual TexUnits is splattered all
across dolphin's codebase, this commit attempts to consolidate it all into a
single place and formalise it using our new TexUnitAddress struct.
MappingWindow is modal, yet the user can use hotkeys while the window is active. I believe hotkeys should not be recognized while this window is active.
This string is extremely likely to be mistranslated without the
proper context. Actually, it's probably impossible to translate
this string in a good way to some languages, but I'm not sure how
to solve that. Let's at least add an i18 comment for now.
PR #10066 added functionality to call std::abort when a panic alert occurs; however, that PR only implemented it for MsgAlert and not MsgAlertFmtImpl, meaning that the functionality was not used with PanicAlertFmt (only PanicAlert, which is not used frequently).
Yes, that's right! It's time to add even more NKit warnings,
because users still don't understand what NKit is or how it works!
More specifically, some users seem to be under the impression that
converting an NKit file to for instance RVZ using Dolphin's convert
feature will result in a normal RVZ file, when it in fact results in
an NKit RVZ file (since NKit is not a container format in the sense
that GCZ/WIA/RVZ/WBFS/CISO is, but rather a kind of trimmed ISO).
I can hardly blame users for not knowing this, because it's not
intuitive unless you know the technical details of how NKit works.
Previously, s_temp_input was being used for BOTH the savestate's and the movie's input printout in the panic alert.
This commit simply performs memcpy from the correct vector for the movInput printout.
Previously, the file dialog window was ambiguous between saving or loading a .dtm. This commit simply gives a bit more context to differentiate the two windows.
Previously, when playing back a movie, you could not see the total frame count of a movie, only the total number of input polls.
This change simply shows the total frame count on movie playback.
Note that this change also results in the framecount and framecount total ALWAYS being displayed if show_movie_window is true, regardless of whether or not m_ShowFrameCount is true. I believe this is fine, as TASers are much more likely to reference the framecount than the input poll count.
Previously, only the number of total input polls would be shown in the window title when playing back a movie. This simply adds the VI / frame count total as well, which is a much more relevant number to look at while TASing.
If this commit is not applied, then the previous commit will cause hotkeys to be saved if there is a syntax error when hitting "OK" and the user presses the X to close the window.
This commit only applies changes to hotkey config if no syntax error occurs.
Previously you could type whatever gibberish you wanted into the formula bar, press OK, and receive a modal syntax error window. Closing the syntax error window would cause the hotkey config window to close as well, and your gibberish would be applied to the hotkey assignment.
This commit requires that a syntax error does not occur before accept() is called.
Previously, using TAS Input to activate the digital L and R buttons would not show these inputs in the Input Display. This commit adds the digital L and R presses to the Input Display, and also displays just "L" or "R" if the analog is set to 255.
There are certain hotkeys that we absolutely want to be able to use
without being in-game. Presently, no hotkeys are recognized unless we
are in-game.
I've identified and moved the following hotkeys to be checked before the
HotkeyScheduler checks to see if the Core is running:
- Open
- Exit
- Start Recording
- Refresh Game List
Note that Play Recording should also be implemented here, however it
looks like there is no signal for a PlayRecording() function, so this
will have to be handled in a later PR once that signal is created and
implemented.
Now that we have enum helpers for inserting values into packets and have
migrated all other enumerations over, there's no need to keep this alias
around any longer.
Previously, it was not clear where the boundary of the StickWidget was when interacting outside of the circle. This aims to restore the gray square present in the Wx-era.
Over time OnData() has become a huge function-long case statement that
attempts to manage numerous packet-related behaviors, which makes it a
little difficult to reliably ensure certain handling doesn't interfere
with another case's. It's also mildly annoying to navigate due to its
size.
To make it a little easier to read and find the specific behavior, we
can break the relevant pieces of code out into their own functions.
When RenderDoc is attached, wglShareLists fails for some reason (see baldurk/renderdoc#2361). wglCreateContextAttribsARB has a parameter for the share context, so there's no reason to use a separate wglShareLists call.
Co-authored-by: baldurk <baldurk@baldurk.org>
Previous code from #7950 only clamps correctly when the efb copies
left and top coordinates are (0, 0)
Now we should handle all situations.
Spyro: A hero's tail is an example of a game that does an oversized
EFB copy with a non-zero origin.
If W0 is locked when fpr.RW is called, the indirectly called
ConvertSingleToDoubleLower may need to emit a push+pop, so it's
better for fresx/frsqrtex to call RW before locking W0 than after.
This way the address check will take up less icache (since it's
only emitted once for each routine rather than once for each
psq_st instruction), and we also get address checking for psq_l.
Matches Jit64's approach.
The disadvantage: In the slowmem case, the routines have to
push *every* caller-saved register onto the stack, even though
most callers probably don't need it. But at long as the slowmem
case isn't hit frequently, this is fine.
In the case of the JitAsm routines, we can't actually use
backpatching. Still, I would like to gather all the load and
store instructions in one place to make future changes easier.
This adjusts the NaN replacement logic introduced in #9928 to work around the HLSL compiler optimizing away calls to isnan, which caused that functionality to not work with ubershaders on D3D11 and D3D12 (it did work with specialized shaders, despite a warning being logged for both; that warning is also now gone). Note that the `D3DCOMPILE_IEEE_STRICTNESS` flag did not solve this issue, despite the warning suggesting that it might.
Suggested by @kayru and @jamiehayes.
This is a proper fix for the issue that 3071a1d was a workaround for.
It wasn't some kind of bug in the register cache that had laid dormant,
it was a simple mistake made in b24b79e.
Fixes a regression from ecf86bb.
The GPR allocation_order is initialized with only 28 elements,
so the 29th element ends up getting zero initialized.
Very sneaky bug...
Previously in Read_U64 and Write_U64 the value that was read or written
would be truncated to a 32-bit value before being passed off to the
memcheck handler, which can result in incorrect values being logged out.
Lets us simplify SDRUpdated() a little bit.
This also fixes the layout of UReg_SDR1. Turns out this struct has been
incorrect (from a little-endian perspective) the entire time and went
unnoticed, since the union was never used.
These are trivial to resolve.
Converting the structure member into a u32 results in no increase in
structure size, as it's making use of the three extra padding bits in
the structure.
On a real Wii, these constants are normally written by the system menu
(maybe even as part of common SDK code?)
However, they're cleared by IOS whenever a PPC title is launched.
IOS memsets 0x0-0x3fff and then manually writes some constants
in low MEM1. PR #4723 added most of the writes in the 0x31xx region
but left out the four writes to the legacy constant region.
Previously Dolphin didn't actually clear 0-0x3fff so those constants
would stick around after a system menu execution.
011f7789e0 exposed those missing writes.
Prompted by https://dolphin.ci/#/builders/24/builds/985
A 1-character typo in a recent PR caused FifoCI builds to break
horribly and spew millions of panic alerts until buildbot crashed.
This PR adds a new config option -- defaulting to off -- that allows
Dolphin to abort early on when a panic alert occurs instead of
continuing forever.
Optimize division by a constant into multiplication. This method is
also used by GCC and LLVM.
We also add optimized paths for divisors 0, 1, and -1, because they
don't work using this method. They don't occur very often, but are
necessary for correctness.
Makes the enum strongly typed instead of interacting with a raw u32
value. While we're at it, we can add helpers to the NWC24Config to make
using code poke at the internals of the class a little bit less and also
make the querying a little nicer to read.
Currently we were using heap allocating maps that last for the entire
duration of the emulator running.
Given the size N of both of these maps are very small (< 20 elements),
we can just make use of an array of pairs and perform linear scans. This
is also fine, given this code isn't particularly "hot" either, so this
won't be run often.
It seems like we spend a lot of the game list scanning time in
updateAdditionalMetadata, which I suppose makes sense considering
how many different files that function attempts to open.
With the addition of just one little atomic operation, we can make
it safe to call updateAdditionalMetadata without holding a lock.
These functions don't touch any class state, so they can be turned into
internal helper functions.
While we're at it, we can move the enumerations as well.
Although it's not clear what the xA and xB conditions are intended to do, the pattern indicates that xB is the regular version and xA is the inverted version, so for consistency, IsConditionB should be the main function.
Since the merge of b24b79e, we've gotten reports that the
following games are broken on JitArm64:
* Sonic Heroes
* The SpongeBob SquarePants Movie
* Astérix & Obélix XXL
* The Incredibles: Rise of the Underminer
Disabling the register cache avoids the issue, so the cause
of the bug might not actually have anything to do with the
newly implemented instructions. Nevertheless, I don't want
to ship a beta with this problem present, so I would like to
disable these instructions for the time being.
HandleFastmemFault works correctly when faults only happen in
expected locations, but it does some things that are rather
dangerous for faults in unexpected locations, like decrementing
an iterator without checking whether it's equal to begin.
This change cleans up the logic by making m_fault_to_handler's
key be the end of the fastmem region instead of the start.
Hardware testing indicated that SRS uses a different list of registers than LRS (specifically, acS.h can be used with SRSH but not LRS, and SRS does not support AX registers, and there are 2 encodings that do nothing).
* DSP*Arithmetic: Fix grammar for ANDCF and ANDF
* DSP*Arithmetic: Fix registers used by MOVAX and MOV
* DSP*Branch: Fix documentation for JMPR
* DSP*Branch: Fix HALT encoding ("I think I saw a two")
* DSP*ExtOps: Fix 'LN encoding (The listed encoding was for 'L)
* DSP*ExtOps: Improve documentation for 'LD and 'LDAX
* DSPJitExtOps: Correct typo
* DSP*LoadStore: Remove obsolete comment about pc in SRS (This was fixed in 1419e7e5b2)
* DSP*LoadStore: Fix comments for LRR/SRR
* DSP*Misc: Improve documentation for SBCLR and SBSET
* DSP*Multiplier: Fix MULXAC encoding (The previous encoding was for MULXMVZ)
* DSP*Multiplier: Fix tabs in MULCAC and MULCMVZ (There are some other tabs in comments in the JIT, but these are the only ones that are in instruction comments instead of indicating the corresponding interpreter code. Those other comments can be corrected in a different PR, as they're not documentation related.)
* DSPJitMultiplier: Fix MULXMVZ typo
These instructions were already implememented by Dolphin, but never added to the manual. Extension instructions will be handled in a later commit, as wlil instructions that were not previously implememented by Dolphin.
We were using a "value" register to avoid clobbering physical_addr,
but this isn't actually needed anymore. The only bits we need from
physical_addr after we start clobbering it are bits 5-9, and
those bits are identical in effective_addr and physical_addr,
so we can read them from effective_addr instead.
Fixes https://bugs.dolphin-emu.org/issues/12620
The changed code did not match the corresponding code in VertexShaderGen. Some parts of the sky have 2 color channels in each vertex, while others only have 1, despite only color channel 0 being used and XFMEM_SETNUMCHAN being set to 1 for both of them. The old code (from #4601) caused channel 0 to be set to channel 1 if the vertex contained both color channels but the number of channels was set to 1, which is wrong.
Makes our conversions between the different signs explicit to indicate
that they're intentional and also silences compiler warnings when
compiling with sign conversion or stricter truncation warnings enabled.
The extension needs to happen in SetLongAcc, not GetLongAcc, as the extension needs to always be reflected in acS.h.
There is no functional difference with the write handler for acS.h, but it is more readable than 4 casts in a row.
`IsLess` would incorrectly return true if both `SR_OVERFLOW` and `SR_SIGN` are set, as `(sr & SR_OVERFLOW) != (sr & SR_SIGN)` becomes `SR_OVERFLOW != SR_SIGN` which is true as the two masks are different. This broke in e651592ef5.
This issue only affected the DSP LLE Interpreter, and not the DSP LLE JIT.
I've also included a simple test case for this. `ax0.l` (on the top left) is set to 0 if the instruction following `IFL` does not execute and to 1 if it is executed.
Retail-signed discs use the format: IOS56-64-v5661.wad
Debug-signed discs use the format: firmware.64.56.22.29.wad
Debug-signed discs usually have a 128 version of the firmware as well,
since some devkits have 128 MB MEM2. (Retail has 64 MB.)
I found it a little bit annoying that you can't start typing
the desired address immediately after opening the window.
Also getting rid of the window's ? button while I'm at it.
When you come across a cheat code in a place like the Dolphin
wiki, it's often posted like this:
$16:9 Widescreen
0441187C 3FE38E39
Sometimes users try to paste this in its entirety into the Code
field, which leads to Dolphin reporting an error on the first line.
I think it would be nice to make this a little smoother by having
Dolphin accept having a first line that starts with $.
For several reasons:
- It pegs the CPU at 95% for scanning even when Dolphin is idle
- WiimoteScannerHidapi works fine on macOS
- Less macOS code to maintain
When making 92d1d60, I checked whether the ~0x1f masking in dcbx
actually was necessary. I came to the conclusion that it wasn't,
so I removed it. However, I hadn't checked the second half of
InvalidateICache closely enough - the masking is actually needed.
This commit re-adds the masking, but this time in C++ code instead
of in jitted code in order to save icache. Though I suppose the
difference doesn't matter all that much, since this is in farcode
and all...
Hopefully fixes https://bugs.dolphin-emu.org/issues/12612.
This implements the behavior described in
https://bugs.dolphin-emu.org/issues/12565.
Thank you to eigenform, delroth, phire, marcan, segher, and Extrems
for all helping in one way or another with the efforts to reverse
engineer this behavior, and to Rylie for reporting the issue.
Write_U16_Swap leaves the upper 32 bits alone. Reimplementing this
correctly in the JIT would require more than one instruction,
so let's just call Write_U16_Swap instead, like Jit64 does.
One of the following commits will add emulation of a quirk
that only happens when writing to memory which is mapped as
write-through or cache-inhibited, so let's keep track of
which memory is mapped in this way.
This adds about a frame of latency, and since most games don't change
VI registers during scanout, we can get away with outputting the XFB at
the start of scanout. WWE Crush Hour is the (only currently known)
exception, which has flickering problems when doing it this way.
This adds a path to perform the output at the end of scanout, and gates
it behind an option which defaults to using the latency-reducing
pre-scanout path.
PR https://github.com/dolphin-emu/dolphin/pull/9700 removed spaces from within control names, which some user complained about, and their point of view is kind of understandable:
https://bugs.dolphin-emu.org/issues/12605
with this change, only spaces outside (between) control names are trimmed, which are the ones we wanted to trim in the first place.
This will still retain the major advantages from 9700.
Basically, "`Button 1` + `Button 2`" was showing as "`Button1`+`Button2`", while it will now show as "`Button 1`+`Button 2`".
Originally, 1479 (for example) would disassemble as `lsr $ACC0, #-7`. At some point (likely the conversion to fmt), this regressed to `lsr $ACC0, #4294967289`. Now, it disassembles as `lsr $ACC0, #7`.
The CPU-side AX library enables it by default and uses hardcoded parameters.
CMD_COMPRESSOR_TABLE_ADDR (0x0A) was incorrect. It's always a nop on the
GameCube and was probably confused with the Wii version.
It was believed that this only mattered when the rounding mode was
set to round to infinity, which games generally don't do, but it
can also affect the sign of the output when the inputs are all zero.
So it turns out you have to pass XMM0 as the clobber register
to HandleNaNs, because HandleNaNs uses BLENDVPD and BLENDVPD
implicitly uses XMM0, and nobody noticed when I broke this in
2c38d64 because nobody plays the one game that needs accurate NaNs.
This was added because YAGCD's info on MAXANISO (near TX_SETMODE0 in Section 5.11.1) claims it's the case, but Extrems says it does work. I haven't tested anything myself, and dolphin still does not actually implement anisotropic filtering based on this field.
This reverts commit 66b992cfe4.
A new (additional) correctness issue was revealed in the old
AArch64 code when applying it on top of modern JitArm64:
LSR was being used when LSRV was intended. This commit uses LSRV.
The workaround added in 30f9f31 caused a regression where Dolphin
incorrectly replaced runs of one byte with runs of another byte
when writing WIA and RVZ files. ReuseID::operator< was always
returning false unless the ReuseIDs being compared had different
partition keys, which caused std::map<ReuseID, GroupEntry>
to treat all ReuseIDs with the same partition key as equal.
This actually eliminates any setting pertaining to SD cards from the
NetPlay dialog, as it would effectively just be a duplicate of the
setting in the Wii pane, potentially causing confusion.
This also enables save data writing by default, as this is probably
what most players want, and should avoid them losing hours of progress
because they forgot to tick a checkbox.
This implementation is pretty efficient in my opinion. And "As
long as we aren't falling back to interpreter we're winning a lot"
applies to basically every instruction to some degree anyway.
The dcbz instruction needs to lock W30 so that the slowmem code will
push and pop it when calling into C++. Also, the slowmem code expects
that the address is present in W0, so replace the use of W0 as a scratch
register in the fastmem code with the now locked W30.
We currently have a bug when calling Arm64GPRCache::Flush with
FlushMode::MaintainState, zero free host registers, and at least
one guest register containing an immediate. We end up grabbing
a temporary register from the register cache in order to be
able to write the immediate to memory, but grabbing a temporary
register when there are zero free registers causes the least
recently used register to be flushed in a way which does not
maintain the state of the register cache.
To get around this, require callers to pass in a temporary
register in the GPR MaintainState case. In other cases,
passing in a temporary register is not required but can help
avoid spilling a register (if the caller already had a
temporary register at hand anyway, which in particular will
be the case in my upcoming memcheck pull request).
release-ubu-x64 currently fails with "sorry, unimplemented: non-trivial
designated initializers not supported". pr-ubu-x64 doesn't for some
reason, but we might as well remove the designated initializer.
This fixes various texture offsetting issues with negative texture coordinates (bringing the software renderer in line with the hardware renderers). It also handles the invalid wrap mode accurately (as was done for the hardware renderers in the previous commit). Lastly, it handles wrapping with non-power-of-2 texture sizes in a hardware-accurate way (which is somewhat broken looking, as games aren't supposed to use wrapping with non-power-of-2 sizes); this has not been done for the hardware renderers.
A voice is considered running if and only if `running` equals 1,
not if `running` is not equal to 0.
This fixes https://bugs.dolphin-emu.org/issues/12508 because for some
reason *The Sims 2 - Castaway* sets `running` to 8 when a stream
finishes playing; previously our AX HLE would just loop the voice
and eventually crash after accessing invalid memory addresses.
Thanks to JMC47 and delroth's help, I've verified that this is the
correct check for the following ucodes:
GC:
* 0x3ad3b7ac
* 0x3daf59b9
* 0x4e8a8b21
* 0x07f88145
* 0xe2136399
* 0x3389a79e
Wii:
* 0x347112ba
* 0xfa450138
* 0xadbc06bd
And while I was fixing the running check, I noticed that the is_stream
field was also being handled incorrectly, so I've fixed that as well.
Putting AX functions from AXVoice.h in an anonymous namespace does
successfully prevent compilers from merging those functions and
allows us to avoid ODR violations.
However, tools such as gdb still mix up AX GC and AX Wii functions
and variables because those have the exact same symbol names.
This can be fixed by using inline namespaces which are transparent
at the source code level but forces AX GC and AX Wii symbols to be
different.
The fast path of using CVTSD2SS/FCVTN rounds the significand if it
can't be exactly represented as a single, whereas the accurate path
instead truncates the significand. So we should only use the fast
path if we know that the lower bits of the significand are not set.
This is not known to affect any games.
Passing a width of 64 and registers encoded as double to
DUP resulted in an invalid instruction. The registers should
be encoded as quads in this situation.
Fixes https://bugs.dolphin-emu.org/issues/12575.
Manually encoding and decoding logical immediates is error-prone.
Using ORRI2R and friends lets us avoid doing the work manually,
but in exchange, there is a runtime performance penalty. It's
probably rather small, but still, it would be nice if we could
let the compiler do the work at compile-time. And that's exactly
what this commit does, so now I have no excuse for trying to
manually write logical immediates anymore.
If a branch is unconditional, its target should not be in farcode,
since that defeats the purpose of farcode (putting seldom executed
code in farcode to keep it out of the icache when possible).
Fixes a 58698b8380 regression. (The EXCEPTION_EXTERNAL_INT
immediate being wrong meant that we never took the branch,
masking the problem of the MSR.EE immediate being wrong...)
In cases where we already know that there is an exception,
either because we just checked for it or because we were
the ones that generated the exception to begin with,
we can skip the branch inside WriteExceptionExit.
Unlike most constants we emit in JitArm64, these constants are
*not* inherent to the CPU we're emulating, and can have whatever
values we want. Let's handle them more robustly, in case we
decide to change their values in the future.
Public domain does not have an internationally agreed upon definition,
As such it's generally preferred to use an extremely liberal license,
which can explicitly list the rights granted by the copyright holder.
The CC0 license is the usual choice here.
This "relicensing" is done without hunting down copyright holders, since
it is presumed that their release of this work into the public domain
authorizes us to redistribute this code under any other license of our
choosing.
This code was part of Dolphin's relicensing from v2 to v2+ a while back,
we just never updated these copyright headers. I double-checked that
segher gave us permission to relicense this code to v2+ on 2015-05-16.
SPDX standardizes how source code conveys its copyright and licensing
information. See https://spdx.github.io/spdx-spec/1-rationale/ . SPDX
tags are adopted in many large projects, including things like the Linux
kernel.
This broke ejecting Wii discs while the game is running, as the drive state was set to Ready even when no disc was present, but other code still reported the missing disc, which confused games as you can't be both ready to read and have no disc. That would cause games to show an unrecoverable error screen, instead of a "please insert the game disc" screen.
This only affected Wii games; the GameCube games used regular disc reads which worked fine.
Performance optimization, along with making the code a little
neater. Saves us from performing a single -> double -> single
conversion when calling UpdateFPRFSingle.
If we already have to use a GPR, we might as well take advantage
of the nice immediate encodings provided by GPR ORR. This is
faster, smaller, and saves a register.
Some of the code used when the carry flag is known to be a
constant value is really not much better than just setting
the carry flag and then using the normal code, and with how
rarely this code runs, it isn't well tested either.
Might as well get rid of some of this code and simplify things.
These optimizations were already present, but only when d == a. They
also make sense when this condition does not hold.
- imm == 0
Before:
41 BB 00 00 00 00 mov r11d,0
45 2B DF sub r11d,r15d
After:
45 8B DF mov r11d,r15d
41 F7 DB neg r11d
- imm == -1
Before:
41 BD FF FF FF FF mov r13d,0FFFFFFFFh
44 2B EE sub r13d,esi
0F 93 45 68 setae byte ptr [rbp+68h]
After:
44 8B EE mov r13d,esi
41 F7 D5 not r13d
C6 45 68 01 mov byte ptr [rbp+68h],1
Without this, the code added in ac28b89 misbehaves and considers
AArch64 netplay clients to not have hardware FMA support, telling
all clients to disable FMA support, which causes a desync between
x64 and AArch64 due to JitArm64 not being able to disable FMA support.
Fixes a regression from 5.0-12066, where setting the GFXBackend variable
to one other than the current global backend would crash Dolphin upon
launching the game.
fcmpX only updates the FPCC bits, not the C bit.
This was already correctly implemented in the interpreter.
Not known to affect any games, but affects a hardware test.
This fixes bounding box shaders failing to compile under Vulkan, due to
differences between GLSL and HLSL in the return value of vector
comparisons and what types these functions accept. I included all() for
the sake of completeness.
At higher resolutions, our bounding box dimensions end up being
slightly larger than original hardware in some cases. This is not
necessarily wrong, it's just an artifact of rendering at a higher
resolution, due to bringing out detail that wouldn't have appeared on
original hardware. It causes a texel to fall partially on what would
have been a single pixel at native resolution, resulting in the
coordinates getting bumped up to the next valid value. In many cases,
these slightly larger bounding boxes are perfectly fine, as games don't
hard-code expected dimensions. It is problematic in Paper Mario TTYD
though, for a somewhat complicated reason.
Paper Mario TTYD frequently uses EFB copies to pre-render a bunch of
animation frames for a character sprite (especially in Chapter 2), so
that it can then render 100 or more of them without bringing the
GameCube to its knees. Based on my observation, the game seems to set
aside a region of memory to store these EFB copies. This region is
obviously fairly small, as the GameCube only has 24MB of RAM. There are
2 rooms in Chapter 2 where you fight a horde of as many as 100 Jabbies,
which are also rendered using EFB copies, so in this room the game ends
up making 130(!) EFB copies just for Puni and Jabbi sprites. This seems
to nearly fill the region of memory it set aside for them.
Unfortunately, our slightly larger bounding boxes at higher resolutions
results in overflowing this memory, causing very strange behavior. Some
EFB copies partially overlap game state, resulting in reading it as a
garbage RGB5A3 texture that constantly changes. Others apparently
somehow trigger a corner case in our persistent buffer mapping, causing
them to partially overwrite earlier EFB copies.
What this change does is only include the screen coordinates that align
with the equivalent native resolution pixel centers, which generally
results in the bounding boxes being more in line with original
hardware. It isn't perfect, but it's enough to fix Paper Mario TTYD's
Jabbi rooms by avoiding the buffer overflow. Notably, it is more
accurate at odd resolutions than at even resolutions. Native resolution
is completely unaffected by this change, as should be the case. This
change may also have a small positive impact on shader performance at
higher resolutions, as there will be less atomic operations performed.
Not doing this can cause desyncs when TASing. (I don't know
how common such desyncs would be, though. For games that
don't change rounding modes, they shouldn't be a problem.)
When I added the software FMA path in 2c38d64 and made us use
it when determinism is enabled, I was assuming that either the
performance impact of software FMA wouldn't be too large or CPUs
that were too old to have FMA instructions were too slow to run
Dolphin well anyway. This was wrong. To give an example, the
netplay performance went from 60 FPS to 30 FPS in one case.
This change makes netplay clients negotiate whether FMA should
be used. If all clients use an x64 CPU that supports FMA, or
AArch64, then FMA is enabled, and otherwise FMA is disabled.
In other words, we sacrifice accuracy if needed to avoid massive
slowdown, but not otherwise. When not using netplay, whether to
enable FMA is simply based on whether the host CPU supports it.
The only remaining case where the software FMA path gets used
under normal circumstances is when an input recording is created
on a CPU with FMA support and then played back on a CPU without.
This is not an especially common scenario (though it can happen),
and TASers are generally less picky about performance and more
picky about accuracy than other users anyway.
With this change, FMA desyncs are avoided between AArch64 and
modern x64 CPUs (unlike before 2c38d64), but we do get FMA
desyncs between AArch64 and old x64 CPUs (like before 2c38d64).
This desync can be avoided by adding a non-FMA path to JitArm64 as
an option, which I will wait with for another pull request so that
we can get the performance regression fixed as quickly as possible.
https://bugs.dolphin-emu.org/issues/12542
Back when I wrote this code, I believe I set it to use a custom path
so that the cache would end up in a directory which Android considers
to be a cache directory. But nowadays the directory which Dolphin's
C++ code considers to be the cache directory is such a directory,
so there's no longer any reason to override the default path.
this prevented some devices from being recreated correctly, as they were exclusive (e.g. DInput Joysticks)
This is achieved by calling Settings::ReleaseDevices(), which releases all the UI devices shared ptrs.
If we are the host (Qt) thread, DevicesChanged() is now called in line, to avoid devices being hanged onto by the UI.
For this, I had to add a method to check whether we are the Host Thread to Qt.
Avoid calling ControllerInterface::RefreshDevices() from the CPU thread if the emulation is running
and we manually refresh devices from Qt, as that is not necessary anymore.
Refactored the way IOWindow lists devices to make it clearer and hold onto disconnected devices.
There were so many issues with the previous code:
-Devices changes would not be reflected until the window was re-opened
-If there was no default device, it would fail to select the device at index 0
-It could have crashed if we had 0 devices
-The default device was not highlighted as such
This helps us keeping the most important devices (e.g. Mouse and Keyboard) on the top
of the list of devices (they still are on all OSes supported by dolphin
and to make hotplug devices like DSU appear at the bottom.
-Fix Add/Remove/Refresh device safety, devices could be added and removed at the same time, causing missing or duplicated devices (rare but possible)
-Fix other devices population race conditions in ControllerInterface
-Avoid re-creating all devices when dolphin is being shut down
-Avoid re-creating devices when the render window handle has changed (just the relevantr ones now)
-Avoid sending Devices Changed events if devices haven't actually changed
-Made most devices populations will be made async, to increase performance and avoid hanging the host or CPU thread on manual devices refresh
A "devices changed" callback could have ended up waiting on another thread that was also populating devices
and waiting on the previous thread to release the callbacks mutex.
Running the min/max operation on the upside down, quad-rounded pixel
coordinates before inverting them to the standard upper-left origin
produces wrong results. Therefore, we need to do the inversion before
rounding to pixel quads.
Fragment coordinates always have a 0.5 offset from a whole integer, as
that's where the pixel center is on modern GPUs. Therefore, we want to
always round the fragment coordinates down for bounding box
calculations. This also renders the pixel center offset useless, as 0.5
vs ~0.5833333 makes no difference when rounding down.
The SDK seems to write "default" bounding box values before every draw
(1023 0 1023 0 are the only values encountered so far, which happen to
be the extents allowed by the BP registers) to reset the registers for
comparison in the pixel engine, and presumably to detect whether GX has
updated the registers with real values. Handling these writes and
returning them on read when bounding box emulation is disabled or
unsupported, even without computing real values from rendering, seems
to prevent games from corrupting memory or crashing.
This obviously does not fix any effects that rely on bounding box
emulation, but having the game not clobber its own code/data or just
outright crash is a definite improvement.
-Reworked thread waits to never hang the Host thread for more than a really small time
(e.g. when disabling DSU its thread now closes almost immediately)
-Improve robustness when a large amount of devices are connected
-Add devices disconnection detection (they'd stay there forever until manually refreshed)
We also need to ensure the the CPU does not receive stale values
which have been updated by the GPU. Apparently the buffer here
is not coherent on NVIDIA drivers. Not sure if this is a driver
bug/spec violation or not, one would think that
glGetBufferSubData() would invalidate any caches as needed, but
this path is only used on NVIDIA anyway, so it's fine. A point
to note is that according to ARB_debug_report, it's moved from
video to host memory, which would explain why it needs the
cache invalidate.
This fixes rendering issues in Viewtiful Joe (https://bugs.dolphin-emu.org/issues/12525), but it is not entirely hardware accurate, as hardware testing showed other, more complex behavior in this case. However, it should be good enough for our purposes.
Looks like the option was added to the Wx UI at commit 198d3b69, which
was a few months after the advancedWidget was originally ported from
Wx to Qt, but before anyone was actually using Qt.
When determinism is enabled, we either want all CPUs to use FMA or
we want no CPUs to use FMA. Until now, Jit64 has been been doing
the latter. However, this is inaccurate behavior, all CPUs since
Haswell support FMA, and getting JitArm64 to match the exact
inaccurate rounding used by Jit64 would be a bit annoying. This
commit switches us over to using FMA on all CPUs when determinism
is enabled, with older CPUs calling the std::fma function.
MAX_XFB_WIDTH/HEIGHT are the largest XFB sizes seen in practice, but do not make sense to use for the backbuffer size, which should be the size of the window. The old code created screenshots with a size of 720x540 on NTSC games when "Dump Frames at Internal Resolution" is unchecked; now, the window size is used.
Adds a new PlatformID for universal builds. This will allow single architecture
builds to be updated through the single architecture path, and universal builds
to be updated with universal builds.
-add a way to reset their value (from the mappings UI)
-fix "memory leak" where they would never be cleaned,
one would be created every time you wrote a character after a "$"
-fix ability to create variables with an empty string by just writing "$" (+added error for it)
-Add $ operator to the UI operators list, to expose this functionality even more
This fixes a nasty issue where you can change the Dual Core setting
during emulation, if it has been overridden by GameINI or NetPlay, by
simply changing any of the non-disabled settings. This is because
changing any of the settings will write all of them to the config.
This issue is particularly nasty because managing to disable Dual Core
during emulation, and then stopping it, results in the emulator core
being totally deadlocked. It's impossible to recover from this state,
and Dolphin will remain as a zombie process on the system, consuming
resources and holding locks, until forcibly killed.
Added RAII wrapper around the the JITPageWriteEnableExecuteDisable() and
JITPageWriteDisableExecuteEnable() to make it so that it is harder to forget to
pair the calls in all code branches as suggested by leoetlino.
Removed the unavailable CPU core dialog box that asked users to change their
selected CPU core to one that is available. Instead, Dolphin now just overrides
the core to the default, and logs that it performed the override.
In MacOS 11.2 mprotect can no longer change the access protection settings of
pages that were previously marked as executable to anything but PROT_NONE. This
commit works around this new restriction by bypassing the mprotect based write
protection and instead relying on the write protection provided by MAP_JIT.
Analytics:
- Incorporated fix to allow the full set of analytics that was recommended by
spotlightishere
BuildMacOSUniversalBinary:
- The x86_64 slice for a universal binary is now built for 10.12
- The universal binary build script now can be configured though command line
options instead of modifying the script itself.
- os.system calls were replaced with equivalent subprocess calls
- Formatting was reworked to be more PEP 8 compliant
- The script was refactored to make it more modular
- The com.apple.security.cs.disable-library-validation entitlement was removed
Memory Management:
- Changed the JITPageWrite*Execute*() functions to incorporate support for
nesting
Other:
- Fixed several small lint errors
- Fixed doc and formatting mistakes
- Several small refactors to make things clearer
This commit adds support for compiling Dolphin for ARM on MacOS so that it can
run natively on the M1 processors without running through Rosseta2 emulation
providing a 30-50% performance speedup and less hitches from Rosseta2.
It consists of several key changes:
- Adding support for W^X allocation(MAP_JIT) for the ARM JIT
- Adding the machine context and config info to identify the M1 processor
- Additions to the build system and docs to support building universal binaries
- Adding code signing entitlements to access the MAP_JIT functionality
- Updating the MoltenVK libvulkan.dylib to a newer version with M1 support
Shouldn't have any behaviour change for regular usage as both masks are 32MB
by default.
But fixes theoretical buffer overrun when memory size override is used.
The interpreter implementation of fctiwx was treating rounding
mode 0 as "round to nearest, ties towards zero", which is not
an actual IEEE-754 rounding mode. The IBM document mentioned
in a comment at the top of the function, on the other hand,
treats rounding mode 0 as "round to nearest, ties to even",
which makes more sense.
This fixes one of JMC's console-recorded F-Zero GX replays on
JitArm64. (JitArm64 uses an interpreter fallback for fctiwx.)
The GC/Wii GPU rasterizes in 2x2 pixel groups, so bounding box values
will be rounded to the extents of these groups, rather than the exact
pixel. To account for this, we'll round the top/left down to even and
the bottom/right up to odd. I have verified that the values resulting
from this change exactly match a real Wii.
Any file which includes scmrev.h must be rebuilt when scmrev.h
is regenerated. By not including scmrev.h from any file other
than Version.cpp, incremental builds become a little faster.
When trying to do a small optimization in 8a0f5ea, I failed to
take into account that WeakFlush and FlushOne update m_query_count.
Only D3D11 and OGL had this problem, not D3D12 and Vulkan.
Sorry, the fix I made to the empty string in a29660a was not
actually sufficient, as DolphinQt will call tr on the string
regardless of whether it's marked with _trans. The proper fix
is to use nullptr, which DolphinQt has a special check for.
Sending an empty string to the translation system will not
result in getting an empty string back, but rather a description
of the currently loaded translations file. So empty strings
should not be marked as translatable.
Also adding some i18n comments and rewording a string I thought
was hard to understand.
casting a value to a u32 when it's originally an int, and it's exposed as int to users,
could end up in cases where a negative number would result as a positive one.
This doesn't really affect the value range of the attachment enum,
still I think the code was wrong.
Heavily tested.
Settings.SECTION_INI_ANDROID and Settings.SECTION_BINDINGS
both have the value "Android", but we only want the former
to be marked as being handled by the new config system.
This change fixes a problem where controller settings were
not being properly saved to Dolphin.ini.
The STL has everything we need nowadays.
I have tried to not alter any behavior or semantics with this
change wherever possible. In particular, WriteLow and WriteHigh
in CommandProcessor retain the ability to accidentally undo
another thread's write to the upper half or lower half
respectively. If that should be fixed, it should be done in a
separate commit for clarity. One thing did change: The places
where we were using += on a volatile variable (not an atomic
operation) are now using fetch_add (actually an atomic operation).
Tested with single core and dual core on x86-64 and AArch64.
NumericSettings support a max, so let's use it.
It might not do much now, but the max and min values will be used to give visual feeback
in the UI in one of my upcoming input PRs
The control expression editor allows line breaks, but the serialization was
losing anything after the first line break (/r /n).
Instead of opting to encode them and decode them on serialization
(which I tried but was not safe, as it would lose /n written in the string by users),
I opted to replace them with a space.
and replacing it with a ":" prefix. Also remove white spaces and \n \t \r.
bugfix: fix EmulatedController::GetStateLock() not being aquired when reading the
expression reference
bugfix: MappingButton::UpdateIndicator() calling State(0) on outputs, breaking ongoing
rumbles if a game was running
Improvement: make expressions previews appear in Italic if they failed to parse correctly
Previously we set the texture coordinate to zero, now we set
the texture coordinate *index* to zero. This fixes the ripple
effect of the Mario painting in Luigi's Mansion.
This change should have no behavioral differences itself, but allows for changing the behavior of out of bounds tex coord indices more easily in the next commit. Without this change, returning tex0 for out of bounds cases and then applying the fixed-point logic would use the wrong tex dimension info (tex0 with I_TEXDIMS[1] or such), which is inaccurate.
Previously we set the texture coordinate to zero, now we set
the texture coordinate *index* to zero. This fixes the ripple
effect of the Mario painting in Luigi's Mansion.
Previously we set the texture coordinate to zero, now we set
the texture coordinate *index* to zero. This fixes the ripple
effect of the Mario painting in Luigi's Mansion.
Co-authored-by: Pokechu22 <Pokechu022@gmail.com>
Since the description updating is tied to the selection changing on the detail list, and the detail list is recreated on each object change, behavior was somewhat broken. Clearing the list changed the current row to zero, but nothing else (particularly m_object_data_offsets) had been updated, so the description was not necessarily correct (this is easier to observe now since the vertex data is at the end, so it's easier to get different lengths of register updates). Furthermore, subsequent clears did not update the current row since there was no visible selection, so it only changed the description once. The current row is now always set to zero, which forces an update (and also scrolls the list back to the top). The presence of FRAME_ROLE and OBJECT_ROLE are also checked so that the description is cleared if no object is selected.
- Only one search result is generated per command/line, even if there are multiple matches in that line.
- Pressing enter on the edit field begins a search, just like clicking the begin button.
- The next and previous buttons are disabled until a search is begun.
- The search results are cleared when changing objects or frames.
- The previous button once again works (a regression from the previous commit), and the register updates and graphics data for the correct object are searched.
- currentRow() never returns -1, so checking that is unnecessary (and misleading).
- The 'Invalid search parameters (no object selected)' previously never showed up before because FRAME_ROLE is present if and only if OBJECT_ROLE is present.
This way, it can be focused with the render window behind it, instead of having the main window show up and cover the render window. This is useful for adjusting the object range, among other things.
If the number of objects varied, this would result in either missing objects on some frames, or too many objects on some frames; the latter case could cause crashes. Since it used the current frame to get the count, if the FIFO is started before the FIFO analyzer is opened, then the current frame is effectively random, making it hard to reproduce consistently.
This issue has existed since the FIFO analyzer was implemented for Qt.
The 'zero frames in the range' check can be removed because now there is always at least 1 frame; of course that might be the same frame over and over again, but that's still useful for e.g. Free Look (and the 1 frame repeating effect already occurred when frame count was exclusive).
A single object can be selected instead of 2 (it was already inclusive internally), and the maximum value is the highest number of objects in any frame (minus 1) to reduce jank when multiple frames are being played back.
Now that this is only called when playback actually starts (and not on unpausing), this change makes the experience a bit better (no more missing objects from not having reset the from object after changing FIFOs).
It is no longer relevant for the current set of loaders after 7030542546. If it becomes relevant again, a static function named IsUsable or IsCompatibleWithCurrentMachine or something would be a better approach.
By taking advantage of three-operand IMUL, we can eliminate a MOV
instruction. This is a small code size win. However, due to IMUL sign
extending the immediate value to 64 bits, we can only apply this when
the magic number's most significant bit is zero.
To ensure this can actually happen, we also minimize the magic number by
checking for trailing zeroes.
Example (Unsigned division by 18)
Before:
41 BE E4 38 8E E3 mov r14d,0E38E38E4h
4D 0F AF F5 imul r14,r13
49 C1 EE 24 shr r14,24h
After:
4D 69 F5 39 8E E3 38 imul r14,r13,38E38E39h
49 C1 EE 22 shr r14,22h
This isn't entirely necessary, as they are interpreted as barewords expressions,
but it's still nicer to have by default. And my upcoming input changes will
always put `` around single letter inputs.
-Add pause state to FPSCounter.
-Add ability to have more than one "OnStateChanged" callback in core.
-Add GetActualEmulationSpeed() to Core. Returns 1 by default. It's used by my input PRs.
The SaveToSYSCONF call in BootManager.cpp was unintentionally
overriding the temporary NAND set by the preceding
InitializeWiiRoot call. Fixes
https://bugs.dolphin-emu.org/issues/12500.
Verifying a Wii game creates an instance of IOS, and Dolphin
can't handle more than one instance of IOS at the same time.
Properly supporting it is probably more effort than it's worth.
Fixes https://bugs.dolphin-emu.org/issues/12494.
Avoids the need to copy the *.mo files manually *and* more importantly
this ensures that the mo files are always recreated if the build
output directory is cleared.
Update references was failing to update the references, causing input to stay nullptr and crashing.
I fixed the case that triggered that, though also added checks against nullptrs for safety.
(cherry picked from commit 4bdcf707555a5568eddff957fa3604975ffb6ed7)
I think the AArch64 JIT has come far enough that it doesn't have to
be called experimental anymore.
I'm also labeling the x86-64 JIT as x86-64 for consistence with the
AArch64 JIT. This will especially be helpful if we start supporting
AArch64 on macOS, as AArch64 macOS can run both the x86-64 JIT and
the AArch64 JIT depending on whether you enable Rosetta 2.
I haven't observed this breaking any game, but it didn't match
the behavior of the interpreter as far as I could tell from
reading the code, in that denormals weren't being flushed.
If we can prove that FCVT will provide a correct conversion,
we can use FCVT. This makes the common case a bit faster
and the less likely cases (unfortunately including zero,
which FCVT actually can convert correctly) a bit slower.
Preparation for following commits.
This commit intentionally doesn't touch paired stores,
since paired stores are supposed to flush to zero.
(Consistent with Jit64.)
This simplifies some of the following commits. It does require
an extra register, but hey, we have 32 of them.
Something I think would be nice to add to the register cache
in the future is the ability to keep both the single and double
version of a guest register in two different host registers
when that is useful. That way, the extra register we write to
here can be read by a later instruction, saving us from
having to perform the same conversion again.
Fixes https://bugs.dolphin-emu.org/issues/12388. Might also fix
other games that have problems with float/paired instructions
in JitArm64, but I haven't tested any.
-They might have never drawn if DrawMessages wasn't called before they actually expired
-Their fade was wrong if the duration of the message was less than the fade time
This makes them much more useful for debugging, I know there might be other means
of debugging like logs and imgui, but this was the simplest so that's what I used.
If you want to print the same message every frame, but with a slightly different value
to see the changes, it now work.
To compensate for the fact that they are now always rendered once,
so on start up a lot of old messages (printed while the emulation was off) could show up,
I've added a "drop" time, which means if a msg isn't rendered for the first
time within that time, it will be dropped and never rendered.
When the interpreter writes to a discarded register, its type
must be changed so that it is no longer considered discarded.
Fixes a 62ce1c7 regression.
We normally check for division by zero to know if we should set the
destination register to zero with a XOR. However, when the divisor and
destination registers are the same the explicit zeroing can be omitted.
In addition, some of the surrounding branching can be simplified as
well.
Before:
45 85 FF test r15d,r15d
75 05 jne normal_path
45 33 FF xor r15d,r15d
EB 0C jmp done
normal_path:
B8 5A 00 00 00 mov eax,5Ah
99 cdq
41 F7 FF idiv eax,r15d
44 8B F8 mov r15d,eax
done:
After:
45 85 FF test r15d,r15d
74 0C je done
B8 5A 00 00 00 mov eax,5Ah
99 cdq
41 F7 FF idiv eax,r15d
44 8B F8 mov r15d,eax
done:
Division by a power of two can be slightly improved when the
destination and dividend registers are the same.
Before:
8B C6 mov eax,esi
85 C0 test eax,eax
8D 70 03 lea esi,[rax+3]
0F 49 F0 cmovns esi,eax
C1 FE 02 sar esi,2
After:
85 F6 test esi,esi
8D 46 03 lea eax,[rsi+3]
0F 48 F0 cmovs esi,eax
C1 FE 02 sar esi,2
Repeated erase() + iteration on a std::multimap is extremely slow.
Slow enough that it causes a 7 second long stutter during some
transitions in F-Zero X (a N64 VC game that triggers many, many icache
invalidations).
And slow enough that JitBaseBlockCache::DestroyBlock shows up on a
flame graph as taking >50% of total CPU time on the CPU-GPU thread:
https://i.imgur.com/vvqiFL6.png
This commit optimises those block link queries by replacing the
std::multimap (which is typically implemented with red-black trees)
with hash tables.
Master: https://i.imgur.com/vvqiFL6.png / 7s stutters
(starting from 5.0-2021 and with branch following disabled)
This commit: https://i.imgur.com/hAO74fy.png / ~0.7s stutters, which
is pretty close to 5.0 stable. (5.0-2021 introduced the performance
regression and it is especially noticeable when branch following
is disabled, which is the case for all N64 VC games since 5.0-8377.)
VideoCommon: Change the type of BPMemory.scissorOffset to 10bit signed: S32X10Y10
VideoBackends: Fix Software Clipper.PerspectiveDivide function, use BPMemory.scissorOffset instead of hard code 342
Oversight from #9545, which moved the "new game has been loaded" logic
to a separate OnNewTitleLoad function that has to be called explicitly
*after* a title has loaded.
Coupled with the commit that makes Dolphin not clobber 0x1800-0x3000
when using MIOS, this fixes Wind Waker and other MIOS-patched games
when they are launched from the System Menu.
MIOS puts patch data in low MEM1 (0x1800-0x3000) for its own use.
Overwriting data in this range can cause the IPL to crash when
launching games that get patched by MIOS.
See https://bugs.dolphin-emu.org/issues/11952 for more info.
Not applying the Gecko HLE patches means that Gecko codes will not work
under MIOS, but this is better than the alternative of having specific
games crash.
This particular range is kind of bizarre, and would only interpret
interleave mode 2 as a valid mode, while rejecting interleave mode 1 and
the extension byte mode.
As far as I know, based off the information on Wiibrew, we should be
considering all three values within this range as valid.
texture serialization and deserialization used to involve many memory
allocations and deallocations, along with many copies to and from
those allocations. avoid those by reserving a memory region inside the
output and writing there directly, skipping the allocation and copy to
an intermediate buffer entirely.
This adds a CMake option (DOLPHIN_DEFAULT_UPDATE_TRACK) to allow
configuring SCM_UPDATE_TRACK_STR. This is needed to enable auto-updates
in Windows CMake builds by default.
This adds a function to get the emulated or real Bluetooth device for
an active emulation instance. This lets us deduplicate all the
`ios->GetDeviceByName("/dev/usb/oh1/57e/305")` calls that are currently
scattered in the codebase and ensures Bluetooth passthrough is being
handled correctly.
This also fixes the broken check in WiimoteCommon::UpdateSource.
There was a confusion between "emulated Bluetooth" (as opposed to
"real Bluetooth" aka Bluetooth passthrough) and "emulated Wiimote".
Specifically, 'Scooby-Doo! Mystery Mayhem', 'Scooby-Doo! Unmasked', 'Ed, Edd n Eddy: The Mis-Edventures', and the Wii version of 'Happy Feet'.
The JIT cache causes problems with emulated icache invalidation in these games, resulting in areas failing to load.
This avoids some warnings, which were originally fixed by ignoring loads with a value of zero (see 636bedb207 / #3242).
Note that FifoCI will report some changes, but only on the first frame; these seem to be timing related as they don't happen if a different write is used to replace skipped ones.
They appear to relate to perf queries, and combining them with truely unknown commands would probably hide useful information. Furthermore, 0x20 is issued by every title, so without this every title would be recorded as using an unknown command, which is very unhelpful.
The swaps are confusing and don't accomplish much.
It was originally written like this:
u32 pte = bswap(*(u32*)&base_mem[pteg_addr]);
then bswap was changed to Common::swap32, and then the array access
was replaced with Memory::Read_U32, leading to the useless swaps.
While 6xx_pem.pdf §7.6.1.1 mentions that the number of trailing
zeros in HTABORG must be equal to the number of trailing ones
in the mask (i.e. HTABORG must be properly aligned), this is actually
not a hard requirement. Real hardware will just OR the base address
anyway. Ignoring SDR changes would lead to incorrect emulation.
Logging a warning instead of dropping the SDR update silently is a
saner behaviour.
debaf63fe8 moved the "Sonic epsilon hack"
to vertex shaders. However, it was only done for targets with depth
clamping. If this is not available, for example the target is OpenGL ES,
the Sonic problem appears (https://bugs.dolphin-emu.org/issues/11897).
A version of the "Sonic epsilon hack" is added for targets without
depth clamping.
This changes FileSystemProxy::Open to return a file descriptor wrapper
that will ensure the FD is closed when it goes out of scope.
By using such a wrapper we make it more difficult to forget to close
file descriptors.
This fixes a leak in ReadBootContent. I should have added such a class
from the beginning... In practice, I don't think this would have caused
any obvious issue because ReadBootContent is only called after an IOS
relaunch -- which clears all FDs -- and most titles do not get close
to the FD limit.
JitArm64::DoJit contains a check where it prints a warning and tries
to pause emulation if instructed to compile code at address 0. I'm
assuming this was done in order to provide a nicer error behavior
in cases where PC was accidentally set to null. Unfortunately, it
has started causing us problems recently, as 688bd61 writes and runs
some code at address 0 to simulate the PPC being held in reset.
What makes this worse is that calling Core::SetState from the CPU
thread is actually not allowed and will cause a deadlock instead of
the intended behavior. I don't believe there is anything on a real
console that would stop you from executing code at address 0 (as
long as the MMU has been set up to allow it), and Jit64::DoJit
doesn't contain any check like this, so let's remove the check.
This commit adds a new "discarded" state for registers.
Discarding a register is like flushing it, but without
actually writing its value back to memory. We can discard
a register only when it is guaranteed that no instruction
will read from the register before it is next written to.
Discarding reduces the register pressure a little, and can
also let us skip a few flushes on interpreter fallbacks.
The output of instructions like fabsx and ps_sel is store-safe
if and only if the relevant inputs are. The old code was always
marking the output as store-safe if the output was a single,
and never otherwise.
Also, the old code was treating the output of psq_l/psq_lu as
store-safe, which seems incorrect (if dequantization is disabled).
This improves the speed of verifying Wii WIA/RVZ files.
For me, the verification speed for LZMA2-compressed files
has gone from 11-12 MiB/s to 13-14 MiB/s.
One thing VolumeVerifier does to achieve parallelism is to
compute hashes for one chunk of data while reading the next
chunk of data. In master, when reading data from a Wii
partition, each such chunk is 32 KiB. This is normally fine,
but with WIA and RVZ it leads to rather lopsided read times
(without the compute times being lopsided): The first 32 KiB
of each 2 MiB takes a long time to read, and the remaining
part of the 2 MiB can be read nearly instantly. (The WIA/RVZ
code has to read the entire 2 MiB in order to compute hashes
which appear at the beginning of the 2 MiB, and then caches
the result afterwards.) This leads to us at times not doing
much reading and at other times not doing much computation.
To improve this, this change makes us use 2 MiB chunks
instead of 32 KiB chunks when reading from Wii partitions.
(block = 32 KiB, group = 2 MiB)
This can't actually happen in practice due to how WAD files work,
but it's very easy to add support for thanks to the last commit,
so we might as well add support for it.
The performance gains of doing this aren't too important since you
normally wouldn't run into any disc image that has overlapping blocks
(which by extension means overlapping partitions), but this change also
lets us get rid of things like VolumeVerifier's mutex that used to
exist just for the sake of handling overlapping blocks.
Panic alerts in DiscIO can potentially be very annoying since
large amounts of them can pop up when loading the game list
if you have some particularly weird files in your game list.
This was a much bigger problem back in 5.0 with its
"Tried to decrypt data from a non-Wii volume" panic alert, but
I figured I would take it all the way and remove the remaining
panic alerts that can show up when loading the game list.
I have exempted uses of ASSERT/ASSERT_MSG since they indicate
a bug in Dolphin rather than a malformed file.
If we know at compile time that the PPC carry flag definitely
has a certain value, we can bake that value into the emitted code
and skip having to read from PPCState.
When a save state is loaded, the IOS device serving bluetooth
is cast as BluetoothEmuDevice. If, however, a real Wiimote
with BT passthrough is used, this caused the game to crash.
Now the proper device class is used.
At a first glance it may look like a part of the code I added to
srawx in efeda3b has a bug when a == s. The code actually happens
to work correctly, but in the interest of making the code easier
to reason about, I'd like to change the way it's implemented. This
change should improve the pipelining a little in the a == s case too.
Fix Gamelist context menu item 'Open Containing Folder' opening wrong
target on Windows when game parent folder is [foobar] and grandparent
folder contains file [foobar].bat or [foobar].exe
Add trailing directory separator to parent folder path to force Windows
to interpret path as directory.
Fixes https://bugs.dolphin-emu.org/issues/12411
21c152f added a small hack to DVDInterface to keep WBFS and CISO
files working with Nintendo's "Error #001" anti-piracy check.
Unfortunately I don't think it's possible to support WBFS and
CISO without any kind of hack or heuristic, but what we can do
is replace the 21c152f hack (which applies regardless of file
format) with a hack that only is active when using WBFS or CISO.
This change is similar to 2a5a399, but the disc size is
calculated in a different way.
Add ! before unused variables to 'use' them.
Ubuntu-x64 emits warnings for unused variables because gcc decides
it should ignore the void cast around them. See thread for discussion:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66425
Loop index int i was being compared against GetControllerCount() which
returned a size_t. This was the only place GetControllerCount() was
called from so the change of return type doesn't disturb anything else.
Changing the loop index to size_t wouldn't work as well since it's
passed into GetController(), which takes an int and is called from many
places, so it would need a cast anyway on an already busy line.
...and let's optimize a divisor of 2 ever so slightly for good measure.
I wouldn't have bothered, but most GameCube games seem to hit this on
launch.
- Division by 2
Before:
41 BE 02 00 00 00 mov r14d,2
41 8B C2 mov eax,r10d
45 85 F6 test r14d,r14d
74 0D je overflow
3D 00 00 00 80 cmp eax,80000000h
75 0E jne normal_path
41 83 FE FF cmp r14d,0FFFFFFFFh
75 08 jne normal_path
overflow:
C1 F8 1F sar eax,1Fh
44 8B F0 mov r14d,eax
EB 07 jmp done
normal_path:
99 cdq
41 F7 FE idiv eax,r14d
44 8B F0 mov r14d,eax
done:
After:
45 8B F2 mov r14d,r10d
41 C1 EE 1F shr r14d,1Fh
45 03 F2 add r14d,r10d
41 D1 FE sar r14d,1
Add a function to calculate the magic constants required to optimize
signed 32-bit division.
Since this optimization is not exclusive to any particular architecture,
JitCommon seemed like a good place to put this.
Zero divided by any number is still zero. For whatever reason, this case
shows up frequently too.
Before:
B8 00 00 00 00 mov eax,0
85 F6 test esi,esi
74 0C je overflow
3D 00 00 00 80 cmp eax,80000000h
75 0C jne normal_path
83 FE FF cmp esi,0FFFFFFFFh
75 07 jne normal_path
overflow:
C1 F8 1F sar eax,1Fh
8B F8 mov edi,eax
EB 05 jmp done
normal_path:
99 cdq
F7 FE idiv eax,esi
8B F8 mov edi,eax
done:
After:
Nothing!
When the dividend is known at compile time, we can eliminate some of the
branching and precompute the result for the overflow case.
Before:
B8 54 D3 E6 02 mov eax,2E6D354h
85 FF test edi,edi
74 0C je overflow
3D 00 00 00 80 cmp eax,80000000h
75 0C jne normal_path
83 FF FF cmp edi,0FFFFFFFFh
75 07 jne normal_path
overflow:
C1 F8 1F sar eax,1Fh
8B F8 mov edi,eax
EB 05 jmp done
normal_path:
99 cdq
F7 FF idiv eax,edi
8B F8 mov edi,eax
done:
After:
85 FF test edi,edi
75 04 jne normal_path
33 FF xor edi,edi
EB 0A jmp done
normal_path:
B8 54 D3 E6 02 mov eax,2E6D354h
99 cdq
F7 FF idiv eax,edi
8B F8 mov edi,eax
done:
Fairly common with constant dividend of zero. Non-zero values occur
frequently in Ocarina of Time Master Quest.
Whether the custom RTC setting is enabled shouldn't in itself
affect determinism (as long as the actual RTC value is properly
synced). Alters the logic added in 4b2906c.
I'm not entirely certain that this is correct, but the current
code doesn't really make sense to me... If we need to force the
RTC bias to 0 when custom RTC is enabled, why don't we need to
do it when custom RTC is disabled? The code for getting the
host system's current time doesn't contain any special handling
for the guest's RTC bias as far as I can tell.
The loop in WIARVZFileReader::Chunk::Read could terminate
prematurely if the size argument was smaller than the size
of an exception list which had only been partially loaded.
Fixes issue 11393.
The problem is that left and top make no sense for a width by height array; they only make sense in a larger array where from which a smaller part is extracted. Thus, the overall size of the array is provided to CopyRegion in addition to the sub-region. EncodeXFB already handles the extraction, so CopyRegion's only use there is to resize the image (and thus no sub-region is provided).
BPMEM_TEV_COLOR_ENV + 6 (0xC6) was missing due to a typo. BPMEM_BP_MASK (0xFE) does not lend itself well to documentation with the current FIFO analyzer implementation (since it requires remembering the values in BP memory) but still shouldn't be treated as unknown. BPMEM_TX_SETMODE0_4 and BPMEM_TX_SETMODE1_4 (0xA4-0xAB) were missing entirely.
Additional changes:
- For TevStageCombiner's ColorCombiner and AlphaCombiner, op/comparison and scale/compare_mode have been split as there are different meanings and enums if bias is set to compare. (Shift has also been renamed to scale)
- In TexMode0, min_filter has been split into min_mip and min_filter.
- In TexImage1, image_type is now cache_manually_managed.
- The unused bit in GenMode is now exposed.
- LPSize's lineaspect is now named adjust_for_aspect_ratio.
Additionally, VCacheEnhance has been added to UVAT_group1. According to YAGCD, this field is always 1.
TVtxDesc also now has separate low and high fields whose hex values correspond with the proper registers, instead of having one 33-bit value. This change was made in a way that should be backwards-compatible.
The PPC is supposed to be held in reset when another version of IOS is
in the process of being launched for a PPC title launch.
Probably doesn't matter in practice, though the inaccuracy was
definitely observable from the PPC.
We should only try to load a symbol map for the new title *after* it
has been loaded into memory, not before. Likewise for applying HLE
patches and loading new custom textures.
In practice, loading/repatching too early was only a problem for
titles that are launched via ES_Launch. This commit fixes that.
The extra IPC ack is triggered by a syscall that is invoked in ES's
main function; the syscall literally just sets Y2, IX1 and IX2 in
HW_IPC_ARMCTRL -- there is no complicated ack queue or anything.
Low MEM1 is cleared by IOS before all the other constants are written.
This will overwrite the Gecko code handler but it should be fine
because HLE::Reload (which will set up the code handler hook again)
will be called after a title change is detected.
The Host constructor sets a callback on a lambda that in turn calls
Host_UpdateDisasmDialog. Since that function is not a member function
capturing this is unnecessary.
Fixes -Wunused-lambda-capture warning on freebsd-x64.
When reading a reply from a message sent to the data socket there is
the possibility that the other side gets sent multiple messages
before replying to any of them, which can lead to multiple replies
sent in a row. Though this only happens when things time out, it's
quite possible for these timeouts to happen or build up over time,
especially when initiating the connection.
This change makes sure to flush any pending bytes that have not been
read yet out of the socket after a successful POLL reply is received,
since that is the most common time when backups occur, and as well as
using the exact number of bytes in an expected reply, to ensure
the received data and the message it's replying to do not get out of
sync.
The result of calls to PPCSTATE_OFF_PS0/1 were being cast to u32 and
passed to functions expecting s32 parameters. This changes the casts
to s32 instead.
One location was missing a cast and generated a warning with VS which
is now fixed.
Added `ToggleBreakPoint` to both interface BreakPoints/MemChecks. this would allow us to toggle the state of the breakpoint.
Also the TMemCheck::is_ranged is not longer serialized to string, since can be deduce by comparing the TMemCheck::start_address and TMemCheck::end_address
DualShock UDP Client is the only place in the code that assumed OnConfigChanged()
is called at least once on startup or it won't load up the setting, so I took care of that
This was caused, because we were saving the `break_on_hit` flag with the letter `p`. Then while loading the breakpoints, we read the flag with the letter `b`, resulting in the `break_on_hit` flag being always false
Filesystem accesses aren't magically faster when they are done by ES,
so this commit changes our content wrapper IPC commands to take FS
access times and read operations into account.
This should make content read timings a lot more accurate and closer
to console. Note that the accuracy of the timings are limited to the
accuracy of the emulated FS timings, and currently performance
differences between IOS9-IOS28 and newer IOS versions are not emulated.
Part 1 of fixing https://bugs.dolphin-emu.org/issues/11346
(part 2 will involve emulating those differences)
This makes it more convenient to emulate timings for IPC commands that
perform internal IOS <-> IOS IPC, for example ES relying on FS
for filesystem access.
According to hwtests, older versions of IOS are slower at performing
various filesystem operations:
https://docs.google.com/spreadsheets/d/1OKo9IUuKCrniz4m0kYIaMP_qFtOCmAzHZ_zAmobvBcc/edit
(courtesy of JMC)
A quick glance at IOS9 reveals that older versions of IOS have a
simplistic implementation of memcpy that does not optimize large copies
by copying 16 bytes or 32 bytes per chunk, which makes cached reads
and writes noticeably slower -- the difference was significant enough
that the OoT speedrunning community noticed that IOS9 (the IOS that
is used for the OoT VC title) was slower.
More or less a complete rewrite of the function which aims
to be equally good or better for each given input, without
relying on special cases like the old implementation did.
In particular, we now have more extensive support for
MOVN, as mentioned in a TODO comment.
Instead of constructing IPCCommandResult with static member functions
in the Device class, we can just add the relevant constructors to the
reply struct itself. Makes more sense than putting it in Device
when the struct is used in the kernel code and doesn't use any Device
specific members...
This commit also changes the IPC command handlers to return an optional
IPCCommandResult rather than an IPCCommandResult. This removes the need
for a separate boolean that indicates whether the "result" is actually
a reply, and also avoids the need to set dummy result values and ticks.
It also makes it really obvious which commands can result in no reply
being generated.
Finally, this commit renames IPCCommandResult to IPCReply since the
struct is now only used for actual replies. This new name is less
verbose in my opinion.
The diff is quite large since this touches every command handler, but
the only functional change is that I fixed EnqueueIPCReply to
take a s64 for cycles_in_future to match IPCReply.
PrepareForState is now unnecessary with the new implementation of
HostFileSystem::DoState, which does what the old implementation
(CWII_IPC_HLE_Device_FileIO::PrepareForState) used to do.
I don't really see the use of this. (Maybe in the past it
was used for when we need a constant number of instructions
for backpatching? But we don't use MOVI2R for that now.)
Now that the ES class (now called ESDevice) and the ES namespace do
not conflict anymore, "IOS::" can be dropped in a lot of cases.
This also removes "IOS::HLE::" for code that is already in that
namespace. Some of those names used to be explicitly qualified
only for historical reasons.
There are no functional changes.
Some of the device names can be ambiguous and require fully or partly
qualifying the name (e.g. IOS::HLE::FS::) in a somewhat verbose way.
Additionally, insufficiently qualified names are prone to breaking.
Consider the example of IOS::HLE::FS:: (namespace) and
IOS::HLE::Device::FS (class). If we use FS::Foo in a file that doesn't
know about the class, everything will work fine. However, as soon as
Device::FS is declared via a header include or even just forward
declared, that code will cease to compile because FS:: now resolves
to Device::FS if FS::Foo was used in the Device namespace.
It also leads to having to write IOS::ES:: to access ES types and
utilities even for code that is already under the IOS namespace.
The fix for this is simple: rename the device classes and give them
a "device" suffix in their names if the existing ones may be ambiguous.
This makes it clear whether we're referring to the device class or to
something else.
This is not any longer to type, considering it lets us get rid of the
Device namespace, which is now wholly unnecessary.
There are no functional changes in this commit.
A future commit will fix unnecessarily qualified names.
According to the C standard, an offsetof expression must evaluate to an
address constant, otherwise it's undefined behavior.
Fixes https://bugs.dolphin-emu.org/issues/12409
See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95942
There are still improper uses of offsetof (mostly in JitArm64) but
fixing that will take more effort since there's a PPCSTATE_OFF wrapper
macro that is sometimes used with non-array members and sometimes used
with arrays and variable indices... Let's keep that for another PR.
Fixes the expression window being spammed with the first entry in the
Operators or Functions select menus when scrolling the mouse wheel while
hovering over them.
Fixes https://bugs.dolphin-emu.org/issues/12405
The dolphin-redirect.php script seems to have been present since 2012
at least, but we accidentally stopped using it when the "open wiki"
feature was reimplemented in DolphinQt2 in 2016.
<@delroth> dolphin-redirect.php is slightly smarter and tries to find gameid aliases for e.g. same region
<@delroth> uh, I mean different region
PR 9262 added a bunch of Jit64 optimizations, some of
which were already in JitArm64 and some which weren't.
This change ports the latter ones to JitArm64.
OR allows for a more compact representation for constants that can be
represented by a signed 8-bit integer, while MOV does not. By letting
MOV handle the larger constants we can occasionally save a byte.
Before:
45 8B F5 mov r14d,r13d
41 81 CE 00 80 01 00 or r14d,18000h
After:
41 BE 00 80 01 00 mov r14d,18000h
45 0B F5 or r14d,r13d
Bitwise or with zero is just a fancy MOV, really.
- Example 1
Before:
41 BA 00 00 00 00 mov r10d,0
45 0B D1 or r10d,r9d
After:
45 8B D1 mov r10d,r9d
- Example 2
Before:
41 83 CA 00 or r10d,0
After:
Nothing!
AND allows for a more compact representation for constants that can be
represented by a signed 8-bit integer, while MOV does not. By letting
MOV handle the larger constants we can occasionally save a byte.
Before:
41 8B FE mov edi,r14d
81 E7 FF FE FF FF and edi,0FFFFFEFFh
After:
BF FF FE FF FF mov edi,0FFFFFEFFh
41 23 FE and edi,r14d
XOR allows for a more compact representation for constants that can be
represented by a signed 8-bit integer, while MOV does not. By letting
MOV handle the larger constants we can occasionally save a byte.
Before:
44 89 F7 mov edi,r14d
81 F7 A0 52 57 01 xor edi,15752A0h
After:
BF A0 52 57 01 mov edi,15752A0h
41 33 FE xor edi,r14d
In the case of eqvx, the final complement can always be baked directly
into the immediate value.
Before:
45 8B EF mov r13d,r15d
41 F7 D5 not r13d
41 83 F5 04 xor r13d,4
After:
45 8B EF mov r13d,r15d
41 83 F5 FB xor r13d,0FFFFFFFBh
PowerPC instructions andcx and orcx complement the value of register b
before performing their respective bitwise operation. If this register
happens to contain a known value, we can precompute the complement,
allowing us to generate simpler code.
- andcx
Before:
BF 00 01 00 00 mov edi,100h
F7 D7 not edi
41 23 FE and edi,r14d
After:
41 8B FE mov edi,r14d
81 E7 FF FE FF FF and edi,0FFFFFEFFh
- orc
Before:
41 BE 04 00 00 00 mov r14d,4
41 F7 D6 not r14d
45 0B F5 or r14d,r13d
After:
45 8B F5 mov r14d,r13d
41 83 CE FB or r14d,0FFFFFFFBh
Let's reset m_last_used for each register that will be used
in an instruction before we start allocating any of them,
so that one of the earlier allocations doesn't spill a
register that we want in a later allocation. (We must still
also increment/reset m_last_used in R and RW, otherwise we
end up in trouble when emulating lmw/stmw since those access
more guest registers than there are available host registers.)
This should ensure that the asserts added earlier in this
pull request are never triggered.
If the register pressure is high when allocating registers,
Arm64FPRCache may spill a guest register which we are going to
allocate later during the current instruction, which has the
side effect of turning it into double precision. This will have
bad consequences if we are assuming that it is single precision,
so let's add some asserts to detect if that ever happens.
This doesn't really add any new optimizations, but fixes an issue that
prevented the optimizations introduced in #8551 and #8755 from being
applied in specific cases. A similar issue was solved for subfx as part
of #9425.
Consider the case where the destination register is also an input
register and happens to hold an immediate value. This results in a set
of constraints that forces the RegCache to allocate a register and move
the immediate value into it for us. By the time we check for immediate
values in the JIT, we're too late.
We solve this by refactoring the code in such a way that we can check
for immediates before involving the RegCache.
- Example 1
Before:
41 BF 00 68 00 CC mov r15d,0CC006800h
44 03 FF add r15d,edi
After:
44 8D BF 00 68 00 CC lea r15d,[rdi-33FF9800h]
- Example 2
Before:
41 BE 00 00 00 00 mov r14d,0
44 03 F7 add r14d,edi
After:
44 8B F7 mov r14d,edi
- Example 3
Before:
41 BD 03 00 00 00 mov r13d,3
44 03 6D 8C add r13d,dword ptr [rbp-74h]
After:
44 8B 6D 8C mov r13d,dword ptr [rbp-74h]
41 83 C5 03 add r13d,3
PR #2663 added a Jit64 implementation of dcbX and a fast path to skip JIT cache invalidation. Unfortunately, there is a mismatch between address spaces in this optimization. It tests the effective address (with the top 3 bits cleared) against the valid block bitset which is intended to be indexed by physical address. While this works in the common case, it fails (for example) when the effective address is in the 7E... region (a.k.a. "fake VMEM"). This may also fall apart under more complex memory mapping scenarios requiring full MMU emulation.
The good news is that even without this fast path, the underlying call to JitInterface::InvalidateICache() still does very little work in the common case. It correctly translates the effective address to a physical address which it tests against the valid block bitset, skipping invalidation if it is not necessary. As such, the cost of removing the fast path should not be too high.
The Jit64 implementation is retained, though all it does now is emit a call. This is marginally more efficient than simple interpreter fallback, which involves an extra call. The JitArm64 implementation has also been fixed.
The game Happy Feet is fixed by this change, as it loads code in the 7E... address region and depends upon JIT cache invalidation in reponse to dcbf.
https://bugs.dolphin-emu.org/issues/12133
At least on some CPUs (I found out about this from the
Arm Cortex-A76 Software Optimization Guide), using X30
with BLR is one cycle slower than using another register.
Previously, eaddr would only be partially initialized in the ipv6 case.
Even if there's no support for it, we may as well ensure that the
variable always has deterministic initialization.
While we're at it, we can make the parameter a const reference, given no
members are modified.
EmulationActivity has an instance of Settings. If you go to
SettingsActivity from EmulationActivity and change some settings,
the changes get saved to disk, but EmulationActivity's Settings
instance still contains the old settings in its map of all
settings (assuming the EmulationActivity was not killed by the
system to save memory). Then, once you're done playing your
game and exit EmulationActivity, EmulationActivity calls
Settings.saveSettings. This call to saveSettings first overwrites
the entire INI file with its map of all settings (which is
outdated) in order to save any legacy settings that have changed
(which they haven't, since the GUI doesn't let you change legacy
settings while a game is running). Then, it asks the new config
system to write the most up-to-date values available for non-legacy
settings, which should make all the settings be up-to-date again.
The problem here is that the new config system would skip writing
to disk if no settings changes had been made since the last time
we asked it to write to disk (i.e. since SettingsActivity exited).
NB: Calling Settings.loadSettings in EmulationActivity.onResume
is not a working solution. I assume this is because
SettingsActivity saves its settings in onStop and not onPause.
For certain occurrences of nandx/norx, we declare a ReadWrite constraint
on the destination register, even though the value of the destination
register is irrelevant. This false dependency would force the RegCache
to generate a redundant MOV when the destination register wasn't already
assigned to a host register.
Example 1:
BF 00 00 00 00 mov edi,0
8B FE mov edi,esi
F7 D7 not edi
Example 2:
8B 7D 80 mov edi,dword ptr [rbp-80h]
8B FE mov edi,esi
F7 D7 not edi
Also avoid files without a name before the extension (name: ".ini")
from being added to the list because then they wouldn't be saveable
and it would appear with an empty name anyway.
This function has been marked as obsolete. In Qt 6.0 it's removed
entirely, so we must use getContentsMargin() explicitly instead
(margin() would do this for us).
Ditto for setMargin(), in which case we use setContentsMargin instead.
setMargin() would just pass its argument to all four parameters of
setContentsMargin(), so we can do the same.
This literal was deprecated in 5.14.0. Not to mention it wasn't
documented as part of the API either: see the 5.14.0 changelog here:
https://code.qt.io/cgit/qt/qtbase.git/tree/dist/changes-5.14.0?h=v5.14.0
On Qt 6.0 this define is removed entirely. To stay forward compatible,
we can make use of QStringLiteral instead.
This skips a potentially costly loop if volume is 100% or 0%,
as for former there is no need for volume adjustment,
while latter can be solved by specifying a AUDCLNT_BUFFERFLAGS_SILENT flag
This fixes numerous resource leaks, as not every return path cleaned every created resource
Now they are all managed automatically and "commited" to WASAPIStream class fields only
after it's certain they initialized properly
When a game is selected, the option to add a shortcut of the game to the desktop is given. Uses native Windows API since Qt lacks support for adding shortcuts.
FinalizeCarryOverflow didn't maintain XER[OV/SO] properly due to an
oversight. Here's the code it would generate:
0: 9c pushf
1: 80 65 3b fe and BYTE PTR [rbp+0x3b],0xfe
5: 71 04 jno b <jno>
7: c6 45 3b 03 mov BYTE PTR [rbp+0x3b],0x3
000000000000000b <jno>:
b: 9d popf
At first glance it seems reasonable. The host flags are carefully
preserved with PUSHF. The AND instruction clears XER[OV]. Next, an
conditional branch checks the host's overflow flag and, if needed, skips
over a MOV that sets XER[OV/SO]. Finally, host flags are restored with
POPF.
However, the AND instruction also clears the host's overflow flag. As a
result, the branch that follows it is always taken and the MOV is always
skipped. The end result is that XER[OV] is always cleared while XER[SO]
is left unchanged.
Putting POPF immediately after the AND would fix this, but we already
have GenerateOverflow doing it correctly (and without the PUSHF/POPF
shenanigans too). So let's just use that instead.
Happens in Super Mario Sunshine. You could probably do something similar
for b == -1 (like we do for subfic), but I couldn't find any titles that
do this.
- Case 1: d == a
Before:
41 8B C7 mov eax,r15d
41 BF 00 00 00 00 mov r15d,0
44 2B F8 sub r15d,eax
After:
41 F7 DF neg r15d
- Case 2: d != a
Before:
BF 00 00 00 00 mov edi,0
41 2B FD sub edi,r13d
After:
41 8B FD mov edi,r13d
F7 DF neg edi
Consider the case where d and a refer to the same PowerPC register,
which is known to hold an immediate value by the RegCache. We place a
ReadWrite constraint on this register and bind it to an x86 register.
The RegCache then allocates a new register, initializes it with the
immediate, and returns a RCX64Reg for both d and a.
At this point information about the immediate value becomes unreachable.
In the case of subfx, this generates suboptimal code:
Before 1:
BF 1E 00 00 00 mov edi,1Eh <- done by RegCache
8B C7 mov eax,edi
8B FE mov edi,esi
2B F8 sub edi,eax
Before 2:
BE 00 AC 3F 80 mov esi,803FAC00h <- done by RegCache
8B C6 mov eax,esi
8B 75 EC mov esi,dword ptr [rbp-14h]
2B F0 sub esi,eax
The solution is to explicitly handle the constant a case before having
the RegCache allocate registers for us.
After 1:
8D 7E E2 lea edi,[rsi-1Eh]
After 2:
8B 75 EC mov esi,dword ptr [rbp-14h]
81 EE 00 AC 3F 80 sub esi,803FAC00h
The special case doesn't appear to make a significant difference in any games, and the current implementation has a (minor, fixable) issue that breaks Super Mario Sunshine (both with a failed assertion (https://bugs.dolphin-emu.org/issues/11742) and a rendering issue (https://bugs.dolphin-emu.org/issues/7476)). Hardware testing wasn't able to reproduce the special case, either, so it may just not exist.
PR #9315 contains a fixed implementation of the special case on all video backends, and can serve as a basis for it being reintroduced if it is found to exist under more specific circumstances. For now, I don't see a reason to keep it present.
-If adding 2 devices with the same name, they their unique id wouldn't be increased, causing a conflict.
-Removing a device wouldn't actually remove it from the internal devices list because the list of devices had already been updated when going through it.
-It was possible to remove devices belonging to other sources by adding a device with the same name and then removing it.
The name was confusing as changing it at runtime would not change the window to fullscreen, as it effectively only affects the start of the emulation.
Also blocked the ability to change it when the emulation is running, to be more inline with other similar settings, like "Render to main Window".
Also provides operator!= for logical symmetry.
We can also take the arguments by value, as the arguments are trivially
copyable enum values which fit nicely into registers already.
https://bugs.dolphin-emu.org/issues/6749
This change fixes the scratchy audio in Teenage Mutant Ninja Turtles (SX7E52/SX7P52). The game starts an audio interface DMA with an unaligned address, and because Dolphin was not masking off the low 5 bits of AUDIO_DMA_START_LO, all future AI DMAs were misaligned. To understand why, it is instructive to refer to AUDIO_InitDMA() in libogc, which behaves the same as the official SDK:
_dspReg[25] = (_dspReg[25]&~0xffe0)|(startaddr&0xffff);
The implementation does not mask off the low bits of the passed in value before it ORs them with low bits of the current register value. Therefore, if they are not masked off by the hardware itself, they become permanently stuck once set.
Adding a write mask for AUDIO_DMA_START_LO is enough to fix the bug in TMNT, but I decided to run some tests on GC and Wii to find the correct write masks for the surrounding registers, as only a couple were already being masked. Dolphin has gotten away with not masking the rest because many are already A) masked on read (or never read) by the SDK and/or B) masked on use (or never used) in Dolphin.
This leaves just three registers where the difference may be observable: AR_DMA_CNT_H and AUDIO_DMA_START_HI/LO.
operator[] performs a default construction if an object at the given key
doesn't exist before overwriting it with the one we provide in operator=
insert_or_assign performs optimal insertion by avoiding the default
construction if an entry doesn't exist.
Not a game changer, but it is essentially a "free" change.
Allows lookups to be done with std::string_view or any other string
type. This allows for non-allocating strings to be used with the name
lookup without needing to construct a std::string.
Cleans up some locks that explicitly specify the recursive mutex type in
it. Meant to be included with the previous commit that cleaned out
regular mutexes, but I forgot.
This code was storing references to patch entries which could move around in memory if a patch was erased from the middle of a vector or if the vector itself was reallocated. Instead, NewPatchDialog maintains a separate copy of the patch entries which are committed back to the patch if the user accepts the changes.
These games are erroneously zeroing buffers before they can be fully copied to ARAM by DMA. The responsible memset() calls are followed by a call to DVDRead() which issues dcbi instructions that effectively cancel the memset() on real hardware. Because Dolphin lacks dcache emulation, the effects of the memset() calls are observed, which causes missing audio.
In a comment on the original bug, phire noted that the issue can be corrected by simply nop'ing out the offending memset() calls. Because the games dynamically load different .rel executables based on the character and/or language, the addresses of these calls can vary.
To deal generally with the problem of code being dynamically loaded to fixed, known addresses, the patch engine is extended to support conditional patches which require a match against a known value. This sort of thing is already achievable with Action Replay/Gecko codes, but their use depends on enabling cheats globally in Dolphin, which is not a prerequisite shared by patches.
Patches are included for every region, character, and language combination. They are enabled by default.
The end result is an approximation of the games' behavior on real hardware without the associated complexity of proper dcache emulation.
https://bugs.dolphin-emu.org/issues/9840
The config version should always be incremented whenever config is
changed, regardless of callbacks being suppressed or not.
Otherwise, getters can return stale data until another config change
(with callbacks enabled) happens.
C++17 allows omitting the mutex type, which makes for both less reading
and more flexibility (e.g. The mutex type can change and all occurrences
don't need to be updated).
Allows the analyzer to exist independently of the DSP structure. This
allows for unit-tests to be created in a nicer manner.
SDSP is only necessary during the analysis phase, so we only need to
keep a reference around to it then as opposed to the entire lifecycle of
the analyzer.
This also allows the copy/move assignment operators to be defaulted, as
a reference member variable prevents that.
Now that we have the convenience functions around the flag
bit manipulations, there's no external usages of the flags, so we can
make these private to the analyzer implementation.
Now the Analyzer namespace is largely unnecessary and can be merged with
the DSP namespace in the next commit.
This commit implements the following commands:
* open
* close
* GetMode
* SetLinkState (used to actually trigger scanning)
* GetLinkState (used to check if the driver is in the expected state)
* GetInfo
* RecvFrame and RecvNotification (stubbed)
* Disassociate (stubbed)
GetInfo was already implemented, but the structure wasn't initialized
correctly so the info was being rejected by official titles.
That has also been fixed in this commit.
Some of the checks may seem unimportant but official titles actually
require WD to return error codes... Failing to do so can cause hangs
and softlocks when DS communications are shut down.
This minimal implementation is enough to satisfy the Mii channel
and all other DS games, except Tales of Graces (https://dolp.in/i11977)
which still softlocks because it probably requires us to actually
feed it frame data.
NCD returns an error if it receives a request to lock the driver
when it is already locked.
Emulating this may seem pointless, but it turns out PPC-side code
expects NCD to return an error and will immediately fail and stop
initialising wireless stuff if NCD succeeds.
Localizes code that modifies m_dsp into the struct itself. This reduces
the overal coupling between DSPCore and SDSP by reducing access to its
member variables.
This commit is only code movement and has no functional changes.
An unfortunately large single commit that deglobalizes the DSP code.
(which I'm very sorry about).
This would have otherwise been extremely difficult to separate due to
extensive use of the globals in very coupling ways that would result in
more scaffolding to work around than is worth it.
Aside from the video code, I believe only the DSP code is the hairiest
to deal with in terms of globals, so I guess it's best to get this dealt
with right off the bat.
A summary of what this commit does:
- Turns the DSPInterpreter into its own class
This is the most involved portion of this change.
The bulk of the changes are turning non-member functions into member
functions that would be situated into the Interpreter class.
- Eliminates all usages to globals within DSPCore.
This generally involves turning a lot of non-member functions into
member functions that are either situated within SDSP or DSPCore.
- Discards DSPDebugInterface (it wasn't hooked up to anything,
and for the sake of eliminating global state, I'd rather get rid of
it than think up ways for this class to be integrated with
everything else.
- Readjusts the DSP JIT to handle calling out to member functions.
In most cases, this just means wrapping respective member function
calles into thunk functions.
Surprisingly, this doesn't even make use of the introduced System class.
It was possible all along to do this without it. We can house everything
within the DSPLLE class, which is quite nice =)
Shifting zero by any amount always gives zero.
Before:
41 B9 00 00 00 00 mov r9d,0
41 8B CF mov ecx,r15d
49 C1 E1 20 shl r9,20h
49 D3 F9 sar r9,cl
49 C1 E9 20 shr r9,20h
After:
Nothing, register is set to constant zero.
Before:
41 B8 00 00 00 00 mov r8d,0
41 8B CF mov ecx,r15d
49 C1 E0 20 shl r8,20h
49 D3 F8 sar r8,cl
41 8B C0 mov eax,r8d
49 C1 E8 20 shr r8,20h
44 85 C0 test eax,r8d
0F 95 45 58 setne byte ptr [rbp+58h]
After:
C6 45 58 00 mov byte ptr [rbp+58h],0
Occurs a bunch of times in Super Mario Sunshine. Since this is an
arithmetic shift a similar optimization can be done for constant -1
(0xFFFFFFFF), but I couldn't find any game where this happens.
Shifting zero by any amount always gives zero.
Before:
41 BF 00 00 00 00 mov r15d,0
8B CF mov ecx,edi
49 D3 E7 shl r15,cl
45 8B FF mov r15d,r15d
After:
Nothing, register is set to constant zero.
All games I've tried hit this optimization on launch. In Soul Calibur II
it occurs very frequently during gameplay.
Much like we did for srawx. This was already implemented on JitArm64.
Before:
B8 00 00 00 00 mov eax,0
8B F0 mov esi,eax
C1 E8 1F shr eax,1Fh
23 C6 and eax,esi
D1 FE sar esi,1
88 45 58 mov byte ptr [rbp+58h],al
After:
C6 45 58 00 mov byte ptr [rbp+58h],0
If both input registers hold known values at compile time, we can just
calculate the result on the spot.
Code has mostly been copied from JitArm64 where it had already been implemented.
Before:
BF FF FF FF FF mov edi,0FFFFFFFFh
8B C7 mov eax,edi
C1 FF 10 sar edi,10h
C1 E0 10 shl eax,10h
85 F8 test eax,edi
0F 95 45 58 setne byte ptr [rbp+58h]
After:
C6 45 58 01 mov byte ptr [rbp+58h],1
More efficient code can be generated if the shift amount is known at
compile time. We can once again take advantage of shifts with the shift
amount in an 8-bit immediate to eliminate ECX as a scratch register,
reducing register pressure and removing the occasional spill. We can
also do 32-bit shifts instead of 64-bit operations.
We recognize four distinct cases:
- The special case where we're dealing with the PowerPC's quirky shift
amount masking. If the shift amount is a number from 32 to 63, all
bits are shifted out and the result it either all zeroes or all ones.
Before:
B9 F0 FF FF FF mov ecx,0FFFFFFF0h
8B F7 mov esi,edi
48 C1 E6 20 shl rsi,20h
48 D3 FE sar rsi,cl
8B C6 mov eax,esi
48 C1 EE 20 shr rsi,20h
85 F0 test eax,esi
0F 95 45 58 setne byte ptr [rbp+58h]
After:
8B F7 mov esi,edi
C1 FE 1F sar esi,1Fh
0F 95 45 58 setne byte ptr [rbp+58h]
- The shift amount is zero. Not calculation needs to be done, just clear
the carry flag.
Before:
B9 00 00 00 00 mov ecx,0
49 C1 E5 20 shl r13,20h
49 D3 FD sar r13,cl
41 8B C5 mov eax,r13d
49 C1 ED 20 shr r13,20h
44 85 E8 test eax,r13d
0F 95 45 58 setne byte ptr [rbp+58h]
After:
C6 45 58 00 mov byte ptr [rbp+58h],0
- The carry flag doesn't need to be computed. Just do the arithmetic
shift.
Before:
B9 02 00 00 00 mov ecx,2
48 C1 E7 20 shl rdi,20h
48 D3 FF sar rdi,cl
48 C1 EF 20 shr rdi,20h
After:
C1 FF 02 sar edi,2
- The carry flag must be computed. In addition to the arithmetic shift,
we do a shift to the left and and them together to know if any ones
were shifted out. It's still better than before, because we can do
32-bit shifts.
Before:
B9 02 00 00 00 mov ecx,2
49 C1 E5 20 shl r13,20h
49 D3 FD sar r13,cl
41 8B C5 mov eax,r13d
49 C1 ED 20 shr r13,20h
44 85 E8 test eax,r13d
0F 95 45 58 setne byte ptr [rbp+58h]
After:
41 8B C5 mov eax,r13d
41 C1 FD 02 sar r13d,2
C1 E0 1E shl eax,1Eh
44 85 E8 test eax,r13d
0F 95 45 58 setne byte ptr [rbp+58h]
More efficient code can be generated if the shift amount is known at
compile time. Similar optimizations were present in JitArm64 already,
but were missing in Jit64.
- By using an 8-bit immediate we can eliminate the need for ECX as a
scratch register, thereby reducing register pressure and occasionally
eliminating a spill.
Before:
B9 18 00 00 00 mov ecx,18h
41 8B F7 mov esi,r15d
48 D3 E6 shl rsi,cl
8B F6 mov esi,esi
After:
41 8B CF mov ecx,r15d
C1 E1 18 shl ecx,18h
- PowerPC has strange shift amount masking behavior which is emulated
using 64-bit shifts, even though we only care about a 32-bit result.
If the shift amount is known, we can handle this special case
separately, and use 32-bit shift instructions otherwise. We also no
longer need to clear the upper 32 bits of the register.
Before:
BE F8 FF FF FF mov esi,0FFFFFFF8h
8B CE mov ecx,esi
41 8B F4 mov esi,r12d
48 D3 E6 shl rsi,cl
8B F6 mov esi,esi
After:
Nothing, register is set to constant zero.
- A shift by zero becomes a simple MOV.
Before:
BE 00 00 00 00 mov esi,0
8B CE mov ecx,esi
41 8B F3 mov esi,r11d
48 D3 E6 shl rsi,cl
8B F6 mov esi,esi
After:
41 8B FB mov edi,r11d
More efficient code can be generated if the shift amount is known at
compile time. Similar optimizations were present in JitArm64 already,
but were missing in Jit64.
- By using an 8-bit immediate we can eliminate the need for ECX as a
scratch register, thereby reducing register pressure and occasionally
eliminating a spill.
Before:
B9 18 00 00 00 mov ecx,18h
45 8B C1 mov r8d,r9d
49 D3 E8 shr r8,cl
After:
45 8B C1 mov r8d,r9d
41 C1 E8 18 shr r8d,18h
- PowerPC has strange shift amount masking behavior which is emulated
using 64-bit shifts, even though we only care about a 32-bit result.
If the shift amount is known, we can handle this special case
separately, and use 32-bit shift instructions otherwise.
Before:
B9 F8 FF FF FF mov ecx,0FFFFFFF8h
45 8B C1 mov r8d,r9d
49 D3 E8 shr r8,cl
After:
Nothing, register is set to constant zero.
- A shift by zero becomes a simple MOV.
Before:
B9 00 00 00 00 mov ecx,0
45 8B C1 mov r8d,r9d
49 D3 E8 shr r8,cl
After:
45 8B C1 mov r8d,r9d
The enumerated LOG_TYPE "OSREPORT" is currently used in both EXI_DeviceIPL.cpp and HLE_OS.cpp. In many games, the multitude of game functions detected by HLE_OS.cpp for OSREPORT logging results in poor log readability. This Pull Request remedies that by adding a new enumerated LOG_TYPE "OSREPORT_HLE" for log usage in HLE_OS.cpp.
In the future, further changing how logging in HLE_OS.cpp works may be desirable. As it is, game functions are detected that send a single character to the log. This is a major source of poor readability.
Introduces the system class that will eventually contain all relevant
system state, as opposed to everything being distributed all over the
place as global variables.
Throughout the codebase we have code that from its interface-view, does
not actually require its dependencies to be described in the interface,
and we routinely run into issues with initialization where we sometimes
make use of a facility before it's been initialized, which leads to
annoying to debug cases, because the reader needs to run through the
codebase and see what order things get initialized in, and how they're
being used. This is particularly a frequent issue in the video code.
Further, we also have a lot of code that makes use of file-scope
variables (many of which are non-trivial), which must all be default
initialized before the application can actually enter main(). While this
may not be a huge issue in itself, some of these are allocating, which
means that the application may need to use memory that it otherwise
wouldn't need to (e.g. when a game isn't running, this excess memory is
being used).
Being able to wrap all these subsystems into objects would be nicer,
since they can be constructed when they're actually needed. Them being
objects also means we can better express dependencies on subsystems as
types directly in the interface, making them explicit to the reader
instead of a change randomly blowing up, said reader inspecting it, and finding
out that something needed to be initialized beforehand. With the global
turned into a function parameter, the dependency is explicit and they
know just by reading it, that the given subsystem needs to be in a valid
state before calling the function.
For a prior example of an emulator that has moved to this model, see
yuzu, which has been migrated off of global variables all over the place
and replaced with a system instance (which has now reached the stage,
where the singleton can be removed).
We want to clear/memset the padding bytes, not just each member,
so using assignment or {} initialization is not an option.
To silence the warnings, cast the object pointer to u8* (which is not
undefined behavior) to make it explicit to the compiler that we want
to fill the object representation.
TunTap has recently become unmaintained, and it seems Apple wants developers to move away from kexts in general. TunTap currently takes some finagling to work on Catalina, and it may not work at all on Big Sur, necessitating a non-kext-based solution. Fortunately, fake Ethernet devices were introduced in Sierra and can be used similarly to tap adapters. This commit adds a new type of BBA interface implementation which uses fake Ethernet devices via tapserver (https://github.com/fuzziqersoftware/tapserver) to communicate with the host. This implementation was tested with PSO Episodes I & II, which can successfully connect to a private server running locally.
This implementation is only available on macOS, since that's the only place it's needed - Windows/Linux/Unix are unaffected by TunTap being deprecated.
Make sure m_is_populating_devices is true when a WM_INPUT_DEVICE_CHANGE
event is received directly on the ciface thread, so that callbacks do
not occur while removing devices. This breaks a hold-and-wait deadlock
between the ciface thread and the CPU thread when using emulated
Wiimotes.
Co-authored-by: brainleq <brainleq@users.noreply.github.com>
Co-authored-by: oldmud0 <oldmud0@users.noreply.github.com>
If we want to enable codes in the default game INIs,
we should have some way for users to disable them.
This commit accomplishes that by adding a *_Disabled
section corresponding to each *_Enabled section.
In order to reach the middle guard (at m_stack_base + GUARD_OFFSET)
before the bottom guard (at m_stack_base), the stack pointer
must start at an address which is higher than the middle guard.
It also didn't make sense that we were allocating memory
and then not using the top part of it.
Nintendo's official title installation code and ES both only look at
content IDs but we should probably check for content hashes in addition
to checking for IDs for at least two reasons:
1. Some of the installed contents could be corrupted -- this cannot be
easily detected without checking hashes.
2. Some mod distributors do not bother to update content IDs, which
means that installing updates from the UI would not actually
update the installed game. This is confusing for users.
To keep the existing semantic (for IOS especially), the new content
hash checks are opt-in for callers of GetStoredContentsFromTMD.
This commit changes WiiUtils's WAD installation logic to enable
the content hash checks.
Adds a flag to File::Delete and File::DeleteDir functions to control
whether a console warning is emitted when the file or directory doesn't
exist. The flag is optional and true by default to match current behavior.
Makes File::DeleteDir return true when attempting to delete a
nonexistent path.
The purpose of DeleteDir is to ensure the path doesn't exist after the
call, which is better reflected by the new return value. Additionally,
none of the current callers actually check the return value so this
won't break any existing code.
Fixes https://bugs.dolphin-emu.org/issues/12327.
When we started using fmt in CheckExternalExceptions, JitArm64
mysteriously stopped working even though the code path where
fmt was used never was reached. This is because the compiler
added a function prologue and epilogue to set up the stack,
since the code path that used fmt required the use of the stack.
However, the breakage didn't actually have anything to do
with the usage of the stack in itself, but rather with the
compiler's insertion of a stack canary. In the function
epilogue, a cmp instruction was inserted to check that the
stack canary had not been overwritten during the execution
of the function. This cmp instruction overwriting the status
flags ended up having a disastrous side effect once execution
returned to code emitted by JitArm64::WriteExceptionExit.
JitArm64's dispatcher contains a branch to the "do_timing"
code which is intended to be taken if the PPC downcount is
negative. However, the dispatcher doesn't update the status
flags on its own before this conditional branch, but rather
expects the calling code to have set them as a side effect
of DoDownCount. The root cause of our bug was that
JitArm64::WriteExceptionExit was calling DoDownCount before
Check(External)Exceptions instead of after.
1. Comparing string_views does not behave the same as strncmp
in the case where SConfig's game ID is longer than 6 chars.
2. DTMHeader::GetGameID wasn't excluding null bytes for game IDs
shorter than 6 chars.
3. == was accidentally used instead of !=.
This issue is both severe and surprisingly difficult to find
the root cause of, so I think it would make sense to add a simple
hotfix for now. https://bugs.dolphin-emu.org/issues/12327
Fallback Region
A user-selected fallback to use instead of the default PAL
This is used for unknown region or region free titles to give them
the ability to force region to use. This replaces the current fallback region
of PAL. This can be useful if a user is trying to play a region free
tilte that is originally NTSC and expects to be run at NTSC speeds. This
may be done when a user attempts to dump a WAD of their own without
understanding the settings they have chosen, or could be an intentional
decision by a developer of a ROM hack that can be injected into a
Virtual Console WAD.
Remove using System Menu region being checked in GetFallbackRegion
Use DiscIO::Region instead of std::String for fallback
Add explanation text for Fallback Region
Unfortunately, adding a DEBUG_ASSERT_MSG_FMT isn't actually possible
right now because of compiler bugs:
https://github.com/dolphin-emu/dolphin/pull/9284
We could require a newer version of GCC (10) but that would require
updating GCC on the build machines.
For what it's worth, older versions of GCC (8, 9) are broken in
many ways: adding constexpr to some Matrix functions causes GCC 8
to generate bugged code that causes the Wii IR pointer to disappear,
which means that the generated builds are already unusable
(see https://dolp.in/i12324).
Additionally, we've already had to add workarounds for those versions
in the format macros to fix compilation bugs. This time, it looks like
workarounds won't cut it; even applying the workaround
described in https://github.com/fmtlib/fmt/pull/1580 does not help.
On Windows, when the Rename function fails to replace an existing file
it will now retry the operation multiple times with increasingly long
delays between attempts. This fixes transient rename failures.
I've been getting sporadic yet annoyingly frequent errors saying:
'IOS_FS: Failed to rename temporary FST file'
These typically appear on startup but I've also gotten them randomly.
Investigation shows this happens when the Windows ReplaceFile function
returns the error ERROR_UNABLE_TO_REMOVE_REPLACED. That happens in the
context of using ReplaceFile to perform an atomic file overwrite, which
is required when saving updates to a file to avoid corruption. The
error mainly happens with the /Wii/fst.bin file but I've seen it
happen with multiple other files as well.
I haven't been able to definitively pin down why the error occurs,
though online discussions suggest antivirus scanning may be a major
culprit. That said, I've excluded the Dolphin folder from Windows
Defender scans to no avail and don't have any other antivirus running,
so this is likely to be a problem others are experiencing as well.
The number and duration of retry delays is arbitrary but I feel like a
combined second or so in the worst case is an acceptable tradeoff for
the reduction (actually elimination in my experience) of those errors.
This is even more true when you consider the time it takes to read and
dismiss the error dialogs.
Converts the remaining PowerPC code over to fmt-capable logging.
Now, all that's left to convert over are the lingering remnants within
the frontend code.
The way Config::Get works in master, it first calls
Config::GetActiveLayerForConfig which searches for the
setting in all layers, and then calls Config::Layer::Get
which searches for the same setting again within the given
layer. We can remove this second search by combining the
logic of Config::GetActiveLayerForConfig and
Config::Layer::Get into one function.
gameID isn't null terminated since it is just an std::array<char, 6>
and .data() returns a char* so {fmt} would go way beyond the bounds of
the array when it attempts to determine the length of the string.
The fix is to pass a std::string_view to {fmt}. This commit adds
a GetGameID() function that can also be used to simplify
string comparisons.
Cel-damage depends on lighting being calculated for the first channel
even though there is no color in the vertex format (defaults to the
material color). If lighting for the channel is not enabled, the vertex
will use the default color as before.
The default value of the color is determined by the number of elements in
the vertex format. This fixes the grey cubes in Super Mario Sunshine.
If the color channel count is zero, we set the color to black before the
end of the vertex shader. It's possible that this would be undefined
behavior on hardware if a vertex color index that was greater than the
channel count was used within TEV.
PR #9260 made the MsgAlert macros use lambdas so that local
constexpr variables can be added while keeping the ability to
return a boolean from the macros.
Unfortunately, C++17 forbids referring to structured bindings in lambda
captures. This is fixed in P1091R3 but we cannot rely on C++20 yet...
In CreateDescriptorSetLayouts(), one less dynamic binding is created when
bSupportsGeometryShaders=false. Reduce the dynamicOffsetCount argument by
one in that case. Avoids this validation error:
Attempting to bind 3 descriptorSets with 2 dynamic descriptors, but
dynamicOffsetCount is 3. It should exactly match the number of dynamic
descriptors. The Vulkan spec states: dynamicOffsetCount must be equal to
the total number of dynamic descriptors in pDescriptorSets
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[Applied clang-format]
Signed-off-by: Léo Lam <leo@leolam.fr>
Unfortunately, {fmt} allows passing too many arguments to a format call
without raising any runtime or compile-time error [1].
As this is a common source of bugs since we started migrating to {fmt},
this commit adds some custom logic to validate the number of
replacement fields in format strings in addition to {fmt}'s own checks.
[1] https://github.com/fmtlib/fmt/issues/492
We want to use positional arguments in translatable strings
that have more than one argument so that translators can change
the order of them, but the question is: Should we also use
positional arguments in translatable strings with only one
argument? I think it makes most sense that way, partially
so that translators don't even have to be aware of the
non-positional syntax and partially because "translatable
strings use positional arguments" is an easier rule for us
to remember than "transitional strings which have more than
one argument use positional arguments". But let me know if
you have a different opinion.
tr calls with more than one argument would have a 0x04 byte
in the returned string when no translation was found
(which always is the case when using Dolphin in English).
They are unused, since there is no C++ code that touches
these settings. See the discussion in PR 9152, which is
a PR that adds a lot more Android-specific settings.
I moved it from the main settings screen to the in-game menu
in PR 8439 so that it could be changed while a game is running,
but now that the main settings can be accessed while a game is
running, there's no reason to not put it in the main settings.
https://bugs.dolphin-emu.org/issues/12067
Adds an interface that uses fmt under the hood, which is much more
flexible than printf, particularly for localization purposes, given fmt
supports positional formatters in a cross-platform manner out of the box
with no configuration necessary.
Time for yet another new iteration of working around the
"surface destruction during boot" problem...
This time, the strategy is to use a mutex in MainAndroid.cpp.
Now that we've converted all of the shader generators over to using fmt,
we can drop the old Write() member function and perform a rename
operation on the WriteFmt() to turn it into the new Write() function.
All changes within this are the removal of a <cstdarg> header, since the
previous printf-based Write() required it, and renaming. No functional
changes are made at all.
Noticed missing include as a build failure on gcc-11:
```
[ 15%] Building CXX object Source/Core/Common/CMakeFiles/common.dir/Config/Config.cpp.o
Source/Core/Common/Config/Config.cpp:23:24:
error: 'unique_lock' in namespace 'std' does not name a template type
23 | using WriteLock = std::unique_lock<std::shared_mutex>;
| ^~~~~~~~~~~
Source/Core/Common/Config/Config.cpp:11:1:
note: 'std::unique_lock' is defined in header '<mutex>';
did you forget to '#include <mutex>'?
```
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Completes the migration over to using the fmt-formatting WriteFmt
function. The next PR will rename all usages of WriteFmt, while
simultaneously getting rid of the old printf code.
Unfortunately, compilers will issue warnings when using offsetof with
non-standard layout types even when offsetof actually works fine here;
just having a virtual function is enough to trigger the warning...
Let's just stop the scan threads explicitly in destructors instead of
relying on member destruction order.
Much of these classes are operating on integral types and are pretty
standard behavior as far as vectors go. Some member functions can be
made constexpr to make them more flexible and allow them to be used in
constexpr contexts.
Replace it with a function-local static that is initialized on first
use. This gets rid of a global variable and removes the need for
manual initialization in UICommon.
This commit also replaces the weird find_if that looks for a non-null
unique_ptr with a simple "is vector empty" check considering that
none of the pointers can be null by construction.
As in the comment, the panning was denaturalizing the volume (when the panning was at 0).
Unless users actually want to use panning, their wii mote volume should not be reduced, it should come out at the same volume the samples were.
If users want to reduce the volume of the wii mote speakers, they can do so from the wii home menu.
I opted for this instead of adding another setting "Enable Panning" as it would have been confusing, and the changes in the panning formula are unlikely to have any negative effect, as it still works.
Provides a basic extension to the interface to begin migration off of
the printf-based logging system.
Everything will go through macros with the same style naming as the old
logging system, except the macros will have the _FMT suffix, while the
migration is in process.
This allows for peacemeal migration over time instead of pulling
everything out and replacing it all in a single pull request, which
makes for much easier reviewing.
Common shouldn't be depending on APIs in Core (in this, case depending
on the PowerPC namespace). Because of the poor separation here, this
moves OSThread functionality into core, so that it resolves the implicit
dependency on core.
Continues migration of the shader generators over to fmt.
With this, all that's left to move over are the pixel shaders (regular
and ubershader variants)
Fixes the following warning:
../../../../../../Core\DiscIO/DirectoryBlob.h:156:3: warning: explicitly defaulted move constructor is implicitly deleted [-Wdefaulted-function-deleted]
DirectoryBlobReader(DirectoryBlobReader&&) = default;
^
../../../../../../Core\DiscIO/DirectoryBlob.h:205:22: note: move constructor of 'DirectoryBlobReader' is implicitly deleted because field 'm_encryption_cache' has a deleted move constructor
WiiEncryptionCache m_encryption_cache;
^
In case someone wants to be very careful with how much bandwidth
they use or with what data GameTDB.com collects on you.
This is already an option in DolphinQt (though in DolphinQt it
will switch entirely from using covers to banners when turned off).
Once nice benefit of fmt is that we can use positional arguments
in localizable strings. This a feature which has been
requested for the Korean translation of strings like
"Errors were found in %zu blocks in the %s partition."
and which will no doubt be useful for other languages too.
Noticed missing include as a build failure on gcc-11:
```
[ 26%] Building CXX object Source/Core/DiscIO/CMakeFiles/discio.dir/WIACompression.cpp.o
../../../../Source/Core/DiscIO/WIACompression.cpp: In lambda function:
../../../../Source/Core/DiscIO/WIACompression.cpp:170:31: error: 'numeric_limits' is not a member of 'std'
170 | std::min<size_t>(std::numeric_limits<unsigned int>().max(), x));
| ^~~~~~~~~~~~~~
../../../../Source/Core/DiscIO/WIACompression.cpp:170:46: error: expected primary-expression before 'unsigned'
170 | std::min<size_t>(std::numeric_limits<unsigned int>().max(), x));
| ^~~~~~~~
```
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
By calling ZSTD_CCtx_setPledgedSrcSize, we can let zstd know
how large a chunk is going to be before which start compressing
it, which lets zstd avoid allocating more memory than needed
for various internal buffers. This greatly reduces the RAM usage
when using a high compression level with a small chunk size,
and doesn't have much of an effect in other circumstances.
A side effect of calling ZSTD_CCtx_setPledgedSrcSize is that
zstd by default will write the uncompressed size into the
compressed data stream as metadata. In order to save space,
and since the decompressed size can be figured out through
the structure of the RVZ format anyway, we disable writing
the uncompressed size by setting ZSTD_c_contentSizeFlag to 0.
Unlike Super Paper Mario, this game doesn't crash as soon as you
try to start it, but rather if you try to skip a certain cutscene.
Thanks to JMC for letting me know about this.
For the non-packed variant of this instruction, a MOVSD instruction was
generated to copy only the lower 64 bits of XMM1 to the destination
register. This was done in order to keep the destination register's
upper half intact.
However, when register c and the destination register are the same,
there is no need for this copy. Because the registers match and due to
the way the mask is generated, BLENDVPD will end up taking the upper
half from the destination register, as intended.
Additionally, the MOVAPS to copy Rc into XMM1 can also be skipped.
Before:
66 0F 57 C0 xorpd xmm0,xmm0
F2 41 0F C2 C6 06 cmpnlesd xmm0,xmm14
41 0F 28 CE movaps xmm1,xmm14
66 41 0F 38 15 CA blendvpd xmm1,xmm10,xmm0
F2 44 0F 10 F1 movsd xmm14,xmm1
After:
66 0F 57 C0 xorpd xmm0,xmm0
F2 41 0F C2 C6 06 cmpnlesd xmm0,xmm14
66 45 0F 38 15 F2 blendvpd xmm14,xmm10,xmm0
For the non-packed variant of this instruction, a MOVSD instruction was
generated to copy only the lower 64 bits of XMM1 to the destination
register. This was done in order to keep the destination register's
upper half intact.
However, when register c and the destination register are the same,
there is no need for this copy. Because the registers match and due to
the way the mask is generated, VBLENDVPD will end up taking the upper
half from the destination register, as intended.
Before:
66 0F 57 C0 xorpd xmm0,xmm0
F2 41 0F C2 C6 06 cmpnlesd xmm0,xmm14
C4 C3 09 4B CA 00 vblendvpd xmm1,xmm14,xmm10,xmm0
F2 44 0F 10 F1 movsd xmm14,xmm1
After:
66 0F 57 C0 xorpd xmm0,xmm0
F2 41 0F C2 C6 06 cmpnlesd xmm0,xmm14
C4 43 09 4B F2 00 vblendvpd xmm14,xmm14,xmm10,xmm0
CommandLineParse expects UTF-8 strings. (QApplication, on the
other hand, seems to be designed so that you can pass in the
char** argv untouched on Windows and get proper Unicode handling.)
Any call to Config::SetCurrent will cause the relevant setting
to show up as overridden in the Android GUI, which can be confusing,
so let's not do it when the new value is the same as the original.
SYSCONF very much is saveable. Whether it's in IsSettingSaveable
or not hasn't mattered until now since the SYSCONF settings use
separate config loader code that doesn't check IsSettingSaveable,
but the next commit will require SYSCONF to be marked as saveable.
Adding AmdPowerXpressRequestHighPerformance
This will allow AMD drivers to detect the request to use the dGPU instead of the iGPU on compatible hybrid graphics systems.
Reference: https://community.amd.com/thread/169965
Fixes https://bugs.dolphin-emu.org/issues/12245.
I considered making a change to DolphinQt instead of
the core, but then additional effort would've been
required to add the same fix to the Android GUI once
we start using the new config system there.
It's possible (but rare) for a WIA or RVZ file to support
this for some partitions but not all, and for the game and
the blob code to disagree on how large a partition is.
In particular, I wanted to do change this in
AudioInterface::Init so that dumped GC audio doesn't need
to have a file split (changing from 32000 Hz to 32029 Hz)
when the emulated software initializes the AI registers.
I've also made the same change to DI's DTK code.
The heuristic was not allocating enough space for Metroid: Other M,
at least when using the default settings. (This didn't break the
file, it just caused some headers to be placed at the end of the
file instead of at the start and wasted a few hundred kilobytes.)
The new hash check catches essentially all desync problems
that VolumeVerifier can catch, so from the user's perspective,
such problems will result in Dolphin refusing to start the
game on netplay rather than actually getting a desync.
This moves the scan thread logic and variables into a separate
ScanThread class. By turning ScanThread instances into members of the
most derived class, this ensures that the scan thread is always
properly stopped when the most derived class is destructed and fixes
a race condition that could cause the scan thread to call virtual
member functions from a derived class whose members have already
been destructed.
A drawback of this approach is that the scan thread must be the last
member variable, so this commit also adds static assertions to ensure
that the assumption stays valid.
The "FindLibLZMA.cmake" module in CMake versions prior to 3.14 do not
set an alias like how Externals/liblzma/CMakeLists.txt does, so builds
performed using one of those older CMake versions will fail if the
system LZMA library is detected. To fix this, we need to link against
"lzma" instead of "LibLZMA::LibLZMA".
Fixes: b59ef81a7e ("WIA: Implement bzip2, LZMA, and LZMA2 decompression")
When I first made VolumeVerifier, I figured that the distinction
between an unsigned ticket and an unsigned TMD was a technical
detail that users would have no reason to care about. However,
while this might be true for discs, it isn't equally true for
WADs, due to the widespread practice of fakesigning tickets to
set the console ID to 0. This practice does not require
fakesigning the TMD (though apparently people do it anyway,
at least sometimes...), and the presence of a correctly signed
TMD is a useful indicator that the contents have not been
tampered with, even if the ticket isn't correctly signed.
FCVT doesn't necessarily round to zero, so the result
might be inaccurate if we use it. To ensure correct
rounding, we use FCVTS from double FPR to 32-bit GPR.
Unfortunately, FCVTS can't do double FPR to single FPR.
This is now unused. Seems like it was an improper fix
(there would be a race if saving the screenshot took longer
than 2 seconds) back when it was used too.
The intent here is to generate a more compact instruction if a 32-bit
immediate can be zero-extended to the desired 64-bit immediate.
Nowadays the emitter is smart enough to do this for us, so this logic is
redundant.
There's no need to load the 64-bit immediate into a temporary register.
x64 will sign-extend 32-bit immediates to 64 bits, giving us the exact
value we need in this case.
48 C7 C0 00 00 FF FF mov rax,0FFFFFFFFFFFF0000h
48 21 C2 and rdx,rax
48 81 E2 00 00 FF FF and rdx,0FFFFFFFFFFFF0000h
- LEA is a bit silly when the source and the destination are the same. A
simple ADD or SHL will do in those cases.
66 8D 04 45 00 00 00 00 lea ax,[rax*2]
66 03 C0 add ax,ax
48 8D 04 00 lea rax,[rax+rax]
48 03 C0 add rax,rax
66 8D 14 D5 00 00 00 00 lea dx,[rdx*8]
66 C1 E2 03 shl dx,3
- When scaling by 2, consider summing the register with itself instead.
The former always needs a 32-bit displacement, so the sum is more
compact.
66 8D 14 45 00 00 00 00 lea dx,[rax*2]
66 8D 14 00 lea dx,[rax+rax]
Other than the controller settings and JIT debug settings,
these are the only settings which were defined in Java code
but not defined in the new config system in C++. (There are
still a lot of settings that are defined in the new config
system but not yet saveable in the new config system, though.)
Instead of comparing the game ID, revision, disc number and name,
we can compare a hash of important parts of the disc including
all the aforementioned data but also additional data such as the
FST. The primary reason why I'm making this change is to let us
catch more desyncs before they happen, but this should also fix
https://bugs.dolphin-emu.org/issues/12115. As a bonus, the UI can
now distinguish the case where a client doesn't have the game at
all from the case where a client has the wrong version of the game.
Turns out, Gamecube games actually do check DILENGTH, and if DILENGTH is at 0, they'll think the transfer completed successfully even if DEINT is used, since after all, surely that means everything was sent. That caused all sorts of issues, from audio looping when a disc is removed since it's re-using the same buffer to just flat-out crashing instead of showing the disc removed screen.
In particular:
- Trying to play audio in a non-ready state returns the state-specific error, not an audio buf error
- Audio status cannot be requested in non-ready states
- The audio buffer cannot be configured in states other than ReadyNoReadsMade
- Using the stop motor command while the motor is already stopped doesn't change states
Additionally, the internal state IDs are used (which distinguish ReadyNoReadsMade and Ready), instead of the state IDs exposed in request error. This makes some of the weird behavior a bit more obvious.
State and error behavior of the seek command was not implemented in this commit.
It is my opinion that nobody should use NKit disc images without
being aware of the drawbacks of them. Since it seems like almost
nobody who is using NKit disc images knows what NKit is (hmm, now
how could that have happened...?), I am adding a warning to Dolphin
so that you can't run NKit disc images without finding out about the
drawbacks. In case someone really does want to use NKit disc images,
the warning has a "Don't show this again" option. Unfortunately, I
can't retroactively add the warning where it's most needed:
in Dolphin 5.0, which does not support Wii NKit disc images.
Pretty much the same optimization we did for AVX, although slightly more
constrained because we're stuck with the two-operand instruction where
destination and source have to match.
We could also specialize the case where registers b, c, and d are all
distinct, but I decided against it since I couldn't find any game that
does this.
Before:
66 0F 57 C0 xorpd xmm0,xmm0
66 41 0F C2 C1 06 cmpnlepd xmm0,xmm9
41 0F 28 CE movaps xmm1,xmm14
66 41 0F 38 15 CC blendvpd xmm1,xmm12,xmm0
44 0F 28 F1 movaps xmm14,xmm1
After:
66 0F 57 C0 xorpd xmm0,xmm0
66 41 0F C2 C1 06 cmpnlepd xmm0,xmm9
66 45 0F 38 15 F4 blendvpd xmm14,xmm12,xmm0
AVX has a four-operand VBLENDVPD instruction, which allows for the first
input and the destination to be different. By taking advantage of this,
we no longer need to copy one of the inputs around and we can just
reference it directly, provided it's already in a register (I have yet
to see this not be the case).
Before:
66 0F 57 C0 xorpd xmm0,xmm0
F2 41 0F C2 C6 06 cmpnlesd xmm0,xmm14
41 0F 28 CE movaps xmm1,xmm14
66 41 0F 38 15 CA blendvpd xmm1,xmm10,xmm0
F2 44 0F 10 F1 movsd xmm14,xmm1
After:
66 0F 57 C0 xorpd xmm0,xmm0
F2 41 0F C2 C6 06 cmpnlesd xmm0,xmm14
C4 C3 09 4B CA 00 vblendvpd xmm1,xmm14,xmm10,xmm0
F2 44 0F 10 F1 movsd xmm14,xmm1
Fixes a critical regression where 95945a0 made us unable to
start emulation on Android 10 and newer. Android is restricting
direct access to /dev/ashmem starting with the new SDK version,
but we can use the new (and simpler) ASharedMemory API instead.
We have to keep using the /dev/ashmem approach on old versions
of Android, though.
On Linux, if shared zlib is present, zlib.h is always available and -lz
links to zlib, even if you don't run find_package(ZLIB).
For some reason I have zlib installed on Windows (possibly from vcpkg),
so find_package(ZLIB) succeeds and ZLIB_FOUND is true.
When Dolphin uses shared zlib on Windows, the problem is that zlib.h
is not in the default include path, and the CMake target is called
ZLIB::ZLIB and there's neither a target nor a library called z.
However, both find_package(ZLIB) and add_subdirectory(Externals/zlib)
create a target called ZLIB::ZLIB, so I'll switch to that instead.
Hopefully this change doesn't break anyone's build.
This modifies GCMemcard::TitlePresent() to match my findings of how the GC BIOS and various games behave when you alter the fields in the directory entry.
It looks like for a save to be recognized by a game, the following have to be true:
- Game code and maker code must exactly match what the game expects.
- Filename is only checked up to the first null byte. All bytes afterwards can be whatever.
The BIOS itself does a full compare of the filename when checking for whether it should allow copying a file from one card to another, but behaves oddly in some cases when there's non-null bytes after the first null. See the big comment in `HasSameIdentity()` for details.
This could cause read errors if chunks were laid out a certain
way in the file and the whole chunk wasn't being read at once.
Should fix https://bugs.dolphin-emu.org/issues/12184.
I believe the value returned by value() resets when we call
setValue() with the maximum (due to auto-reset). I have been
unable to test this because I can't reproduce the issue, which is
described at https://bugs.dolphin-emu.org/issues/12158#note-9.
The functions with "UTF" in the name use "modified UTF-8" rather
than the standard UTF-8 which Dolphin uses, at least according
to Oracle's documentation, so it is incorrect for us to use them.
This change fixes the problem by converting between UTF-8 and
UTF-16 manually instead of letting JNI do it for us.
This function does *not* always convert from UTF-16. It converts
from UTF-16 on Windows and UTF-32 on other operating systems.
Also renaming UTF8ToUTF16 for consistency, even though it
technically doesn't have the same problem since it only was
implemented on Windows.
As a side effect of 9c5c3c0, Dolphin's frame counter was changed
to run at 60/50 Hz even if the game is running at a lower framerate
such as 30 fps. Since the TAS input turbo button functionality
toggled the state of a button every other frame as reported by
the frame counter, this change made the turbo button functionality
not work with 30/25 fps games.
I believe it would be hard to change the frame counter back to
how it used to work without undermining the point of 9c5c3c0,
and I'm not sure if doing so would be desireable or not anyway,
so what I'm doing instead is letting the user determine how long
turbo button presses should last. This lets users avoid the 30/25
fps game problem while also granting additional flexibility.
Perhaps there is some game where it is useful to mash at a speed
which is slower than frame perfect.
Also added a IsRunning function as it was impossible to know whether it had been started or not (I will use it in later PRs but it should be there anyway)
Currently, the touch controller overlay uses a square gate for
sticks. This commit changes that so that it instead uses the
stick gate configured in the INI, which ensures that the values
sent to the core are appropriately scaled regardless of what
is configured in the INI and makes the overlay look nicer
if the INI is set to a stick gate that matches the graphics.
While manually capturing constexpr variables used in lambda
expressions does work, it's really easy to forget doing so since
we don't have a Windows CMake builder and the workaround isn't
necessary anywhere else. Fortunately, MSVC has a flag that fixes
the constexpr capture behavior, so let's use that instead.
Fixes https://bugs.dolphin-emu.org/issues/12066.
I must've only tested the frame counter with an earlier version
of the PR that broke this, not the final version...
HostIsInstructionRAMAddress uses XCheckTLBFlag::OpcodeNoException,
so we should also use XCheckTLBFlag::OpcodeNoException when reading,
to ensure that we use the IBAT (as opposed to the DBAT) for both.
Doesn't support triggering interrupts when the thermal threshold is
exceeded, but allows polling for temperature information.
The THRM[123] registers are documented in most PPC datasheets, see e.g.
this PPC750CX one: http://datasheets.chipdb.org/IBM/PowerPC/750/750cx_um3-17-05.pdf
PURGE isn't especially useful, while requiring some annoying
special handling in the file format. If you want no compression,
use NONE. If you want fast compression, use Zstandard.
Gets rid of the need to seek to the end of the file
when opening a file.
The downside of this is that we waste a little space,
since we can't know in advance exactly how much
space the compressed parts of the headers will need.
This is useful for the way Dolphin scrubs Wii discs.
The encrypted data is what gets zeroed out, but this
zeroed out data then gets decrypted before being stored,
and the resulting data does not compress well.
However, each block of decrypted scrubbed data is
identical given the same encryption key, and there's
nothing stopping us from making multiple group entries
point to the same offset in the file, so we only have
to store one copy of this data per partition.
For reference, wit zeroes out the decrypted data,
but Dolphin's WIA writer can't do this because it currently
doesn't know which parts of the disc are scrubbed.
This is also useful for things such as storing Datel discs
full of 0x55 blocks (repesenting unreadable blocks)
without compression enabled.
Fixes https://bugs.dolphin-emu.org/issues/10654.
To quote the documenation file included with the program tgctogcm:
"TGC's are miniaturized .gcm images with a 32kB header.
The embedded gcm contains some bogus data, namely:
-FST Location (0x424 in gcm)
-DOL Location (0x420 in gcm)
-FST File offsets (all files are offset/spoofed by a certain amount)"
Dolphin has been handling the values at 0x420 and 0x424 by simply
overwriting them with a working value (just like tgctogcm does),
but it has used a different approach for the file offsets in the FST.
Instead of changing the offsets that are stored in the FST, Dolphin
changed where the files actually are placed on the virtual disc.
My hope was that this would make the loading times more accurate to
how they are when running a TGC file as part of a larger disc.
However, there are TGC files where we would need to move files
backwards on the disc in order to do this (this is what issue
10654 is about), so the approach we have been using is flawed.
This change makes Dolphin overwrite offsets in the FST instead, like
tgctogcm does. Other than making Dolphin handle the affected TGC files
correctly, this change also makes it so that unnecessary padding data
isn't written if you use Dolphin to convert a TGC file to an ISO file.
This feature is not actually implemented in Dolphin as of now, but I'm
planning to add it in the near future as part of a larger feature.
This is intended to catch WIA files which have been created using
wit's default parameters (40 MiB block size), once the WIA PR is
merged. The check does however also work for GCZ files – not that
I think anyone has a GCZ file with a block size that large.
There was a race condition between two PRs incrementing the
array size. CI didn't catch it because the PR that was merged
last (PR #8824) wasn't rebuilt after the first PR was merged.
canonicalPath is orders of magnitude slower as it has to perform actual
disk I/O to resolve symlinks, which makes sorting by this column
ridiculously slow for large game lists, especially if the games are on
a NAS. We probably don't need that, simply resolving relative paths
should be sufficient.
std::result_of is deprecated in C++17, and removed in C++20. Microsoft
has gone ahead with the removal as of Visual Studio 16.6.0, so before
this change our code is broken there.
These are only ever used with ShaderCode instances and nothing else.
Given that, we can convert these helper functions to expect that type of
object as an argument and remove the need for templates, improving
compiler throughput a marginal amount, as the template instantiation
process doesn't need to be performed.
We can also move the definitions of these functions into the cpp file,
which allows us to remove a few inclusions from the ShaderGenCommon
header. This uncovered a few instances of indirect inclusions being
relied upon in other source files.
One other benefit is this allows changes to be made to the definitions
of the functions without needing to recompile all translation units that
make use of these functions, making change testing a little quicker.
Moving the definitions into the cpp file also allows us to completely
hide DefineOutputMember() from external view, given it's only ever used
inside of GenerateVSOutputMembers().
A very trivial conversion, this simply converts calls to Write over to
WriteFmt and adjusts the formatting specifiers as necessary.
This also allows the const char* parameters to become std::string_view
instances, allowing for ease of use with other string types.
The include for X11Utils.h (and by extension Xlib.h) is gated behind
HAVE_XRANDR, as well as the declaration for this function, but its
definition was mistakenly gated behind HAVE_X11. Therefore, if we have
X11 but not Xrandr, the build will fail due to declaration/definition
mismatch and the missing Window type.
CopyNandFile must not create empty files on the destination filesystem
if the source file doesn't exist.
Otherwise, this can lead to an empty Mii database being created in the
session Wii root if there's no database in the configured Wii root and
netplay or Movie is used -- that database would then be copied back to
the configured root, which causes games like MKW to complain about
corrupted Mii data even when the player has stopped using netplay.
This commit also simplifies CreateFullPath usage.
There's no need to manually extract the directory from the path,
FS::CreateFullPath does it automatically just like File::CreateFullPath
Remove the warning:
warning: offsetof within non-standard-layout type ‘JitBlock’ is conditionally-supported
JitBlock contains non-trival types now. Split the fields with trival
types that needs to be access from JIT code into JitBlockData structure.
`std::abs(x - y)` where x and y are unsigned integers fails to compile
with an "call of overloaded 'abs(unsigned int)' is ambiguous" error
on GCC, and even if it did compile, that expression still wouldn't
give the correct result since `x - y` is unsigned.
Lambda expressions with uncaptured constants were leading to errors,
and there were also some warnings about deprecated functions
(QFontMetrics::width and inet_ntoa).
Panic alerts don't use fixed width fonts, and translators are
unlikely to preserve the exact spacing unless they are given
specific instructions to do so and are willing to fight against
the Transifex interface a bit.
We must not provide the /Externals directory as global include directory.
Here, this yield a crash because of external minizip header and system library mismatch.
Soundtouch itself recormends to include it with <SoundTouch.h> and -I/usr/include/soundtouch, so this should fit better.
It actually maps to postMtxInfo, not posMtxInfo (which isn't a thing).
This is especially confusing because there *are* position matrices (as
opposed to post-transform matrices).
Changed several enums from Memmap.h to be static vars and implemented Get functions to query them. This seems to have boosted speed a bit in some titles? The new variables and some previously statically initialized items are now initialized via Memory::Init() and the new AddressSpace::Init(). s_ram_size_real and the new s_exram_size_real in particular are initialized from new OnionConfig values "MAIN_MEM1_SIZE" and "MAIN_MEM2_SIZE", only if "MAIN_RAM_OVERRIDE_ENABLE" is true.
GUI features have been added to Config > Advanced to adjust the new OnionConfig values.
A check has been added to State::doState to ensure savestates with memory configurations different from the current settings aren't loaded. The STATE_VERSION is now 115.
FIFO Files have been updated from version 4 to version 5, now including the MEM1 and MEM2 sizes from the time of DFF creation. FIFO Logs not using the new features (OnionConfig MAIN_RAM_OVERRIDE_ENABLE is false) are still backwards compatible. FIFO Logs that do use the new features have a MIN_LOADER_VERSION of 5. Thanks to the order of function calls, FIFO logs are able to automatically configure the new OnionConfig settings to match what is needed. This is a bit hacky, though, so I also threw in a failsafe for if the conditions that allow this to work ever go away.
I took the liberty of adding a log message to explain why the core fails to initialize if the MIN_LOADER_VERSION is too great.
Some IOS code has had the function "RAMOverrideForIOSMemoryValues" appended to it to recalculate IOS Memory Values from retail IOSes/apploaders to fit the extended memory sizes. Worry not, if MAIN_RAM_OVERRIDE_ENABLE is false, this function does absolutely nothing.
A hotfix in DolphinQt/MenuBar.cpp has been implemented for RAM Override.
Utilizing constexpr, we can eliminate the need to construct the tables
at runtime and just do all the work at compile-time. Making for less
moving parts overall.
The general structure is more or less the same, however rather than one
single initialization function, each table is built off an immediately
executed lambda function. This is nice, since it narrows the scope of
the table building logic down to the tables that actually need it.
While having motion control emulation of IR enabled by default
makes sense in situations like using a DualShock 4 on a PC,
Android has the additional option of touch emulation of IR
which seems to be better liked, and the default value which
was chosen with PC in mind was carried over to Android
without any particular consideration. This change disables
motion control emulation of IR by default on Android only.
The code was actually already rather well adapted for this.
We more or less just have to skip ParseDisc and run
ParsePartitionData directly. This required the PartitionHeader
struct to be removed (which wasn't that useful anyway).
If we start 31 KiB into a 32 KiB block and want to mark 2 KiB
of data as used, we need to mark 2 blocks as used, not just 1.
This problem is avoided when calling MarkAsUsed from
MarkAsUsedE, since MarkAsUsedE aligns to 32 KiB on its own.
Most calls to MarkAsUsed are from MarkAsUsedE, which is why
this hasn't been a noticeable problem in the past.
The constant DESIRED_BUFFER_SIZE was determined by multiplying the
old hardcoded value 32 with the default GCZ block size 16 KiB.
Not sure if it actually is the best value, but it seems fine.
Similar to what we do for addx. Since we're calculating b - a and
because subtraction is not communitative, we can only apply this when
source register a holds the constant.
Before:
45 8B EE mov r13d,r14d
41 83 ED 08 sub r13d,8
After:
45 8D 6E F8 lea r13d,[r14-8]
We can get away with skipping the addition when we know we're dealing
with a constant zero. Just a MOV will suffice in this case.
Once again, we don't bother to add separate handling for when overflow
is needed, because no titles would ever hit that path during my testing.
Before:
8B 7D F8 mov edi,dword ptr [rbp-8]
83 C7 00 add edi,0
After:
8B 7D F8 mov edi,dword ptr [rbp-8]
ADD has a smaller encoding for immediates that can be expressed as an
8-bit signed integer (in other words, between -128 and 127). MOV lacks
this compact representation.
Since addition allows us to swap the source registers, we can always get
the shortest sequence here by carefully checking if we're dealing with a
small immediate first. If we are, move the other source into the
destination and add the small immediate onto that. For large immediates
the reverse is preferrable.
Before:
41 BE 40 00 00 00 mov r14d,40h
44 03 75 A8 add r14d,dword ptr [rbp-58h]
After:
44 8B 75 A8 mov r14d,dword ptr [rbp-58h]
41 83 C6 40 add r14d,40h
Before:
44 8B 7D F8 mov r15d,dword ptr [rbp-8]
41 81 C7 00 68 00 CC add r15d,0CC006800h
After:
41 BF 00 68 00 CC mov r15d,0CC006800h
44 03 7D F8 add r15d,dword ptr [rbp-8]
When the source registers are a simple register and a constant zero and
overflow isn't needed, emitting LEA is kinda silly.
This will occasionally save a single byte for certain registers due to
how x86 encoding works. More importantly, LEA takes up execution
resources while MOV does not.
Before:
41 8D 7D 00 lea edi,[r13]
After:
41 8B FD mov edi,r13d
When the destination register matches a source register, the other
source register contains zero, and overflow isn't needed, the
instruction becomes a nop and we don't need to emit anything.
We could add specialized handling for the case where overflow is needed,
but none of the titles I tried would hit this path.
Before:
83 C7 00 add edi,0
After:
No functional change, just simplify some repeated logic in the case
where we're dealing with exactly one immediate and one simple register
when overflow isn't needed.
On some platforms (like Windows), the temporary file must be closed
before it can be renamed.
I guess nobody noticed this for so long because (1) the FS code has a
failsafe for missing FST entries (because existing users do not have
a FST), and most games do not care about file metadata;
(2) the write failures can only be seen in the logs.
Because we don't want this to break, I have turned the ERROR_LOGs into
PanicAlerts.
The threads can't actually be started when determinism is enabled, as
the behavior would not be deterministic, but Open() still tries to
start the threads and wait, resulting in a deadlock when booting
certain games and homebrew in NetPlay.
https://bugs.dolphin-emu.org/issues/11997
The problem seemed to be that s_DILENGTH would get set to 0
at times when it shouldn't. Simply not changing it in case
of NoReply or DTK seems to fix the problem. However, we can
actually go one step further in accuracy and use data.size()
to change s_DIMAR and s_DILENGTH as partial reads (NoReply
commands) complete, instead of jumping directly to 0 when
the whole read completes.
It used to be the case that frame advance skipped duplicate frames
(i.e. it would take 30 frame advances to get through one second
of emulated time in a 30 fps game), but this broke in 9c5c3c0.
Skipping duplicate frames making TASing less annoying.
Since we are calling this off the UI thread, we can't use anything which
accesses the underlying NSView object. We create and set the Metal layer
on the UI thread before the video backend is initialized. This extension
is both compatible with MoltenVK and gfx-portability for accepting a
layer at surface creation.
This fixes a bug where pressing Enter in the "Do you want to stop the
current emulation?" confirmation popup also triggers a KeyRelease in
GameList, which starts a new game.
Hardware tests have shown that if the number of texgens/channels do not
match, you get garbage rendering. Presumably because the output
registers from the XF stage are fed into the incorrect input registers
for TEV/BP.
Currently, this causes Dolphin to crash/generate invalid shaders with an
assertion failure in the hardware backends. Instead, we log an error.
Perhaps in the future we should just spit out all texgens/colors anyway
from both stages, and let cross-stage optimization take care of DCE'ing
it away. But doing so would require changing the UIDs and invalidating
everyone's shader caches.
ROM_BASE is 0, and address is unsigned. It is always
true that address >= 0. So just compare with ROM_SIZE
and don't use IN_RANGE macro to avoid the warning.
For some reason every button group was shoved into the same config
group called "Keys" which caused buggy behavior once someone tried to
have hotkeys with the same name in different groups. This fixes that,
and converts existing configs to the new group names so they don't get
reset.
When booting a Wii game, Dolphin can overwrite certain settings
in the SYSCONF file, such as turning off PAL60 for NTSC games.
Normally, these settings get reverted at the end of emulation, but
this does not happen if Dolphin crashes or force quits in some other
way. (Personally, I have a tendency to use Visual Studio's Stop
Debugging button, which kills the process...)
Dolphin also overwrites certain values in setting.txt when booting
a Wii game. Unlike with SYSCONF, we currently make no effort to
preserve the original values in this file.
This change fixes both of these problems by copying SYSCONF and
setting.txt to the Backup folder when booting a Wii game, and then
copying them back either when launching Dolphin (in case the
previous run of Dolphin crashed) or when ending emulation.
This commit attempts to improve error handling for device opening by
reducing panic alert spam when opening one or several devices fails.
Currently, Dolphin shows a panic alert for every device that we fail
to open, and another panic alert at the end if no usable device was
found. That is certainly a bit excessive -- we should only keep the
very last panic alert (the one that is shown if everything fails)
and we can just put the error for the last device open operation there.
This also changes the PanicAlert to a CriticalAlert to ensure the
message is visible even if the user has disabled regular panic alerts.
The message has also been reworded and should hopefully be clearer.
This is related to https://bugs.dolphin-emu.org/issues/10958 which
uses Qt to clear out the window so the game list isn't displayed
while the core is booting. Instead, we use the video backend to
render a black screen, which means Qt doesn't have to flip between
paint engines.
Without included header build fails on gcc-10 as:
```
[ 52%] Building CXX object Source/Core/Core/CMakeFiles/core.dir/DSP/DSPTables.cpp.o
../../../../Source/Core/Core/DSP/DSPTables.cpp: In function 'const char* DSP::pdname(u16)':
../../../../Source/Core/Core/DSP/DSPTables.cpp:492:3: error: 'sprintf' was not declared in this scope
492 | sprintf(tmpstr, "0x%04x", val);
| ^~~~~~~
```
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Without included header build fails on gcc-10 as:
```
[ 13%] Building CXX object Source/Core/AudioCommon/CMakeFiles/audiocommon.dir/CubebUtils.cpp.o
In file included from ../../../../Source/Core/AudioCommon/CubebUtils.cpp:13:
../../../../Source/Core/Common/StringUtil.h: In function 'bool TryParse(const string&, T*)':
../../../../Source/Core/Common/StringUtil.h:84:20: error: 'numeric_limits' is not a member of 'std'
84 | if (value < std::numeric_limits<LimitsType>::min() ||
| ^~~~~~~~~~~~~~
```
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
On Windows, Qt's default system font (MS Shell Dlg 2) is outdated.
Dolphin previously used over 15 lines of code to compute a font
closer to the proper font, but with an approximately correct font size.
Using the QMenu font directly is both more concise and more elegant
(in my opinion).
So far in all our uses of ScopeGuard, the type of the callable is
usually just a lambda or a function pointer, so there is no need
to rely on std::function's type erasure.
While the cost of using std::function is probably negligible, it still
causes some unnecessary overhead that can be avoided by making
ScopeGuard a templated class. Thanks to class template argument
deduction in C++17 most existing usages do not even need to be changed.
See https://godbolt.org/z/KcoPni for a comparison between
a ScopeGuard that uses std::function and one that doesn't
Some locales (e.g. fr_FR.UTF-8 on ArchLinux) don't split the string stream on a space. As such, when extracted formatted data from te stream, it will return the two numbers as one for the first call, effectively overflowing the u32 variable, then will do an out-of-bounds read for the second call. Forcing the use of the C locale on the streams where it would cause a problem allows to workaround this behavior.
It seems that the newer version of fmt gets tripped up by bitfields
within structs. However, we can just specify the intended type where
necessary to get around this.
This fixes CreateFullPath to not create directories when it is known
that they already exist, instead of calling CreateDirectory anyway
and checking if the error is AlreadyExists. (That doesn't work
now that we have an accurate implementation of CreateDirectory
that performs permission checks before checking for existence.)
I'm not sure what I was thinking when I wrote that function.
Also adds some tests for CreateFullPath.
Fixes a regression from #8539.
CreateDirectory was the correct function to use for creating
directories since parent directories already exist and are
not owned by the system menu.
This is only used on Apple and Unix-like machines, so we can enclose the
prototype with an ifdef like the implementation is. This prevents
false-positives about an unimplemented function prototype.
Now that all FS functions that create new inodes are properly
implemented, we can make GetMetadata actually return correct file
metadata rather than giving fixed information. The hack for the DQX
installer can also be removed now since our ES and FS keep track of
caller UID/GIDs now.
With the CreateFile/CreateDirectory fix and this commit, we can
finally return correct results in ReadDirectory and the sorting
hack -- whose purpose was to prevent certain versions of the
System Menu from crashing -- can be removed too.
CreateDirectory does not create missing parent directories. If that
behaviour is desired, CreateFullPath should be used instead.
(These small misuses went unnoticed since the previous implementation
of CreateDirectory automatically created parent directories.)
Previously, the FS root directory would get created as a side
effect of calling CreateDirectory during boot (since the
implementation was sloppy and used File::CreateFullDir).
Since CreateDirectory no longer does that, it is necessary to ensure
that the FS root directory does exist by creating it explicitly.
Some official titles rely on implementation details of Nintendo's
FS sysmodule and will not work properly if those are changed.
Notably, some games and older versions of the System Menu appear
to be relying on the order of files returned by FS::ReadDirectory
and will either fail to find their save data (for Bolt) or
outright crash (for the System Menu).
Some titles also actually expect filesystem metadata to be correct.
One title that has been confirmed to do this is DQX, which generates
paths based on the GID of files within its own title directory.
While it is easy to make workarounds for these issues -- and in fact
we already do have some for the sysmenu and DQX, having hacks
is obviously nonideal and adding yet another hack would be required
to fix Bolt -- one that would be even uglier.
Furthermore, while it is currently unknown whether any official
title cares about permissions, the lack of FS metadata means that
we are unable to implement them if that turns out to be desirable
or necessary.
By adding a FST, we can implement things correctly and solve all
those problems without hacks.
Apart from DQX, the sysmenu and Bolt, this changeset also fixes
the Photo Channel complaining about corrupted system files
on the initial launch.
This first commit adds the basic structures and functions that
are necessary to load, save, query and update our version of the FST.
For simplicity, a binary format that is inspired from Nintendo's FST
structure was chosen for serialization. It is not expected to ever
receive an update.
PS: an update on the NAND image backend:
A long time ago I had planned to add another FS backend which would
be using a NAND image/blob as the storage. While I have already
written an implementation that has been tested, solves all the
aforementioned issues and more, produces images that are fully
compatible with IOS's FS driver, I feel like NAND images raise too
many issues: savestate sizes, code complexity and maintenance cost.
Since many fixes and additions that are part of that implementation
(e.g. FS timings, utility structures, FST) have already been merged
or will be submitted as part of this changeset, I will likely not
submit the branch.
Migrates the shader generator off the use of a global array, eliminating
the use of some global state. This also allows us to move the shader
generation over to using fmt in a subsequent change.
Add a function that safely returns whether a character is printable
i.e. whether 0x20 <= c <= 0x7e is true.
This is done in several places in our codebase and it's easy to run
into undefined behaviour if the C version defined in <cctype>
is used instead of this one, since its behaviour is undefined
if the character is not representable as an unsigned char.
This fixes MemoryViewWidget.
Otherwise, a line that's too wide for the log widget will cause the horizontal scroll bar to appear, which reduces the vertical height, and causes the most recent line to be off screen. Since that line is off screen, the log widget no longer scrolls as new lines appear, unless it's manually scrolled to the very bottom again.
This is an alternative to PR 8557 and PR 8558. The way this PR solves
the problem is essentially the same as what we had before PR 8394
(except the code we had back then only worked because it was broken).
Currently, we do not display every second frame in 25fps/30fps games
which run to vsync. This improves performance as there's less rendering
for the GPU to perform, but when combined with vsync, could cause frame
pacing issues.
This commit adds an option to force every frame generated by the console
to be displayed to the host, which may improve pacing for these games.
This works around Linux drivers for DS4 (Playstation 4) controllers splitting the device into three separate event nodes which makes configuration difficult.
To prevent collisions of input names in combined devices more descriptive names are now used when possible.
Due to the way the ModRM encoding works on x86, memory addressing
combinations involving RBP or R13 need an additional byte for an 8-bit
displacement of zero.
However, this was also applied in cases where it is unnecessary,
effectively wasting a byte.
- MatR with RSP or R12
8B 44 24 00 mov eax,dword ptr [rsp]
8B 04 24 mov eax,dword ptr [rsp]
- MRegSum with base != RBP or R13
46 8D 7C 37 00 lea r15d,[rdi+r14]
46 8D 3C 37 lea r15d,[rdi+r14]
- MComplex without offset
8B 4C CA 00 mov ecx,dword ptr [rdx+rcx*8]
8B 0C CA mov ecx,dword ptr [rdx+rcx*8]
This updates the lint script to require clang-format 9 and reformats
existing source code. Since VS2019 ships with clang-format 9 this
should make auto reformats less painful.
This also updates the clang-format configuration to set
BraceWrapping.AfterCaseLabel to true to ensure consistent brace
style; otherwise clang-format 9+ defaults to putting braces on
the same line as switch case labels.
Was checking over this old code, and saw a comment calling me out for a lack of documentation.
It might be half a decade late, but better late then never.
The old logic would always emit LEA when both sources are in a register
and OE is disabled. However, ADD is still preferable when one of the
sources matches the destination.
Before:
45 8D 6C 35 00 lea r13d,[r13+rsi]
After:
44 03 EE add r13d,esi
The ES sysmodule in IOS62 (v6430) has an exception for the
Wii U Transfer Tool in the SetUid function.
If the active title is the Wii U Transfer Tool, then calling SetUid
is always allowed. (The UID is still checked first, though.)
Fixes https://bugs.dolphin-emu.org/issues/10985
Partitions are Wii-exclusive, and don't happen at the DVDInterface level in
IOS. This isn't quite the cleanest fix, but it gets rid of the assumption that
a partition is open on starting the game at least.
The various ioctls sometimes have different arguments than the DI command
registers, though they generally overlap. There are also a bunch of ioctls
that don't even normally go into DVDInterface, just returning various data.
Some of the implemented ioctls are new to Dolphin.
A small, nonexhaustive set of warning fixes. The DiscIO Volume change
is a workaround for a GCC bug [1] that causes returning an unengaged
std::optional to emit annoying -Wmaybe-uninitialized warnings.
This last change alone fixes pages upon pages of warnings since
Volume.h is included from several files.
-Wstringop-truncation is another irrelevant warning for us, but
unfortunately there seems to be no way to disable it without
adding ugly pragmas wherever the warning appears.
- Refactor the Config::System::Main check so we check system once,
then we check for the section.
- Use an std::array<> instead of std::vector<>.
- Use an array of pointers instead of an array of ConfigLocation.
The latter contains two std::string objects, whereas pointers
are only 8 bytes (on 64-bit).
Code size comparison: (64-bit Linux, gcc-9.2.0, release build)
text data bss dec hex filename
16136 0 40 16176 3f30 IsSettingSaveable.cpp.o [before]
3933 720 0 4653 122d IsSettingSaveable.cpp.o [after]
-12203 +720 -40 -11523 -2d03 Difference
NOTE: The explicit std::string() conversions later are needed. Otherwise,
gcc-9.2.0 throws all sorts of errors because it can't find a matching
operator+() function.
"ppcState{}" is stored in the .data segment, which means the full ~4 MB
is stored in the executable.
"ppcState" is stored in the .bss segment, which means it only stores a
note that tells it to allocate and zero ~4 MB at runtime.
string_view is a thin wrapper around C strings, so it's more efficient
for constant strings than C++ strings.
The unordered_set<> also adds extra runtime overhead. For small arrays,
a simple linear search works. For larger arrays, std::binary_search()
works better than linear but without the unordered_set<> overhead.
ShouldBeDualLayer(): Removed a duplicate "SK8X52" entry.
This was a huge speedup with disabled fastmem, but it still requires the fastmem arena.
So let's disable it for now, even if this commit has a huge performance hit with disabled fastmem.
This fixes Old AX Wii games having no audio when compiled under VS2019.
This also includes some minor code cleanup and moving a function to
avoid duplication.
Removed conditional use of std::mutex instead of std::shared_mutex on MacOS.
Because MacOS < 10.12 did not support std::shared_mutex, a previous commit
naïvely substituted std::mutex, which does not have the same behavior.
Reverses PR #8273, which substitues std::mutex for std::shared_mutex on
macOS, and results in several bugs that seem to only affect MacOS
- https://bugs.dolphin-emu.org/issues/11919
- https://bugs.dolphin-emu.org/issues/11842
- https://bugs.dolphin-emu.org/issues/11845
This change eliminates conditional code for MacOS in the core configuration
layer code and enables the use of modern language features that are more
secure and thread-safe.
The frame number is incremented before the first frame is swapped out.
Fixes ffmpeg creating invalid video files on output if the emulator only
runs for a single frame, e.g. FifoCI.
See the discussion in https://bugs.dolphin-emu.org/issues/11930.
(This probably doesn't really fix that issue, but it's something
I thought would make sense anyway.)
This was causing a race which was crashing the FifoCI runners. The main
thread called Stop() which in turn called ResetAllWiimotes() while the
emu thread was still exiting, also shutting down the Wiimote class.
By shifting the reset to the emu thread, all cleanup operations happen
on the same thread where they were initialized.
Now that we have an actual interface to manage things, we can stop
duplicating the calls to to the pixel shader manager and remove the
need to remember to actually do so when disabling or enabling the
bounding box.
Rather than expose the bounding box members directly, we can instead
provide an interface for code to use. This makes it nicer to transition
from global data, as the interface function names are already in
place.
Now that we've extracted all of the stateless functions that can be
hidden, it's time to make the index generator a regular class with
active data members.
This can just be a member that sits within the vertex manager base
class. By deglobalizing the state of the index generator we also get rid
of the wonky dual-initializing that was going on within the OpenGL
backend.
Since the renderer is always initialized before the vertex manager, we
now only call Init() once throughout the execution lifecycle.
We can use if constexpr with the template functions that pass in a
non-type template parameter, allowing the removal of branches that
aren't taken at compile time.
Compilers will generally do this by default, however, we now give a
gentle prodding to the compiler if this would otherwise not be the case.
These don't rely on any of the static members within the IndexGenerator
class, so we can make all of these functions fully internal to the
translation unit.
We can make use of if constexpr in several scenarios here to allow
compilers to exise the relevant code paths out.
Technically a decent compiler would do this already, but now we can give
compilers a little more nudging here in the event that isn't the case.
cmd2 is a u32, so any bitwise arithmetic on it with a type of the same
size or smaller will result in a u32 value. This is also implicitly
converted to an unsigned type in the if statement as well, given that
size_t * int -> size_t.
This is just more explicit about the operations occurring and also
likely silences a sign conversion warning.
We only use these string streams to output into a final std::string
instance, we don't read into types with them. Because of this, we can
just make use of std::ostringstream, rather than the fully-fledged
std::stringstream.
No behavioral change. This is intended to make the transition to fmt
less noisy in subsequent changes by combining insertions of multiple
string literals into one where applicable.
