devkitA64: update gcc to 13.1.0

.gitignore

@@ -1,7 +1,8 @@
 config.sh
 .devkitARM*
 .devkitPPC*
-.devkitPSP*
+.devkitA64*
+*.xz
 *.gz
 *.bz2
 *~

README.TXT

@@ -1,9 +1,14 @@
 devkitPro build scripts
 --------------------------
 
-This readme will guide you through building devkitARM, devkitPPC or devkitPSP
+This readme will guide you through building devkitARM, devkitPPC or devkitA64
 from source using a set of scripts.
 
+Please note that we can't guarantee that what you build with these scripts
+will function in the same way as the binaries we distribute. Where possible
+you should use the binary distributions. We also offer no support for any
+problems you may encounter with these scripts.
+
 The windows versions of the toolchains are now cross compiled on linux using
 mingw-w64
 
@@ -19,9 +24,9 @@ For building gcc libgmp, libmpfr and libmpc are required - these are built as
 static libraries to make packaging simpler. If you're building the tools for
 personal use then the versions packaged by your chosen distro should suffice.
 
-http://gmplib.org/
+https://gmplib.org/
-http://www.mpfr.org/
+https://www.mpfr.org/
-http://www.multiprecision.org/
+https://www.multiprecision.org/
 
 sudo apt-get install libgmp-dev libmpfr-dev libmpc-dev
 
@@ -29,18 +34,27 @@ Some of the tools for devkitARM and devkitPPC also require FreeImage, zlib,
 expat, and libusb. Again these are built as static libraries for ease of
 packaging but you can probably use the versions supplied by your distro.
 
-http://freeimage.sourceforge.net/
+https://freeimage.sourceforge.net/
-http://www.zlib.net
+https://www.zlib.net
-http://www.libusb.org
+https://www.libusb.org
-http://expat.sourceforge.net/
+https://expat.sourceforge.net/
 
-sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev libexpat1-dev
+sudo apt-get install libfreeimage-dev zlib1g-dev libusb-dev libudev-dev libexpat1-dev
 
 
 Building gxtexconv for cube/wii needs GL/gl.h which can be obtained with
 
 sudo apt-get install mesa-common-dev
 
+Tools for devkitA64 require liblz4.
+
+http://lz4.github.io/lz4/
+
+sudo apt-get install liblz4-dev
+
+The liblz4 with Ubuntu 14.04 isn't new enough. Either upgrade to at least 16.04 or
+build this from source.
+
 For building the OSX versions we install the Xcode commandline tools and build
 pkg-config from source as well as static versions of the libraries listed above.
 This helps keep the dependencies to a minimum so end users can use the tools

build-devkit.sh

@@ -1,15 +1,15 @@
-#!/bin/bash
+#!/usr/bin/env bash
 #---------------------------------------------------------------------------------
-#	devkitARM release 47
+#	devkitARM release 61
-#	devkitPPC release 29-1
+#	devkitPPC release 43
+#	devkitA64 release 22
 #---------------------------------------------------------------------------------
 
 if [ 0 -eq 1 ] ; then
-	echo "Currently in release cycle, proceed with caution, do not report problems, do not ask for support."
 	echo "Please use the latest release buildscripts unless advised otherwise by devkitPro staff."
-	echo "http://sourceforge.net/projects/devkitpro/files/buildscripts/"
+	echo "https://github.com/devkitPro/buildscripts/releases/latest"
 	echo
-	echo "The scripts in the git repository are quite often dependent on things which currently only exist"
+	echo "The scripts in the git repository may be dependent on things which currently only exist"
 	echo "on developer machines. This is not a bug, use stable releases."
 	exit 1
 fi
@@ -18,43 +18,21 @@ echo "Please note, these scripts are provided as a courtesy, toolchains built wi
 echo "are for personal use only and may not be distributed by entities other than devkitPro."
 echo "See http://devkitpro.org/wiki/Trademarks"
 echo
-echo "Patches and improvements are of course welcome, please send these to the patch tracker"
+echo "Users should use devkitPro pacman to maintain toolchain installations where possible"
-echo "https://sourceforge.net/tracker/?group_id=114505&atid=668553"
+echo "See https://devkitpro.org/wiki/devkitPro_pacman"
+echo
+echo "Patches and improvements are of course welcome, please submit a PR"
+echo "https://github.com/devkitPro/buildscripts/pulls"
 echo
 
 
-GENERAL_TOOLS_VER=1.0.0
 
-LIBGBA_VER=0.5.0
+DKARM_RULES_VER=1.3.0
-GBATOOLS_VER=1.0.0
+DKARM_CRTLS_VER=1.2.1
 
-LIBNDS_VER=1.6.2
+DKPPC_RULES_VER=1.1.2
-DEFAULT_ARM7_VER=0.7.0
-DSWIFI_VER=0.4.1
-MAXMOD_VER=1.0.11
-FILESYSTEM_VER=0.9.13
-LIBFAT_VER=1.1.0
-DSTOOLS_VER=1.1.0
-GRIT_VER=0.8.14
-NDSTOOL_VER=2.0.3
-DLDITOOL_VER=1.24.0
-MMUTIL_VER=1.8.6
 
-DFU_UTIL_VER=0.9.1
+DKA64_RULES_VER=1.0.1
-STLINK_VER=1.2.2
-
-GAMECUBE_TOOLS_VER=1.0.1
-LIBOGC_VER=1.8.16
-WIILOAD_VER=0.5.1
-
-LIBCTRU_VER=1.3.0
-CITRO3D_VER=1.3.0
-TOOLS3DS_VER=1.1.4
-LINK3DS_VER=0.5.2
-PICASSO_VER=2.6.2
-
-GP32_TOOLS_VER=1.0.3
-LIBMIRKO_VER=0.9.7
 
 OSXMIN=${OSXMIN:-10.9}
 
@@ -80,13 +58,6 @@ if [ ! -z "$CROSSBUILD" ] ; then
 	fi
 fi
 
-#---------------------------------------------------------------------------------
-# Sane defaults for building toolchain
-#---------------------------------------------------------------------------------
-export CFLAGS="-O2 -pipe"
-export CXXFLAGS="$CFLAGS"
-unset LDFLAGS
-
 #---------------------------------------------------------------------------------
 # Look for automated configuration file to bypass prompts
 #---------------------------------------------------------------------------------
@@ -141,18 +112,22 @@ fi
 echo use $MAKE as make
 export MAKE
 
+CROSS_PARAMS="--build=`./config.guess`"
+
+if [ ! -z $CROSSBUILD ]; then
+	export PATH=/opt/devkitpro/$package/bin:$PATH
+	prefix=$INSTALLDIR/$CROSSBUILD/$package
+	CROSS_PARAMS="$CROSS_PARAMS --host=$CROSSBUILD"
+	CROSS_GCC_PARAMS="--with-gmp=$CROSSPATH --with-mpfr=$CROSSPATH --with-mpc=$CROSSPATH --with-isl=$CROSSPATH --with-zstd=$CROSSPATH"
+else
+	prefix=$INSTALLDIR/$package
+fi
+
 #---------------------------------------------------------------------------------
 # Add installed devkit to the path, adjusting path on minsys
 #---------------------------------------------------------------------------------
 TOOLPATH=$(echo $INSTALLDIR | sed -e 's/^\([a-zA-Z]\):/\/\1/')
-export PATH=$PATH:$TOOLPATH/$package/bin
+export PATH=$TOOLPATH/$package/bin:$PATH
-
-if [ ! -z $CROSSBUILD ]; then
-	prefix=$INSTALLDIR/$CROSSBUILD/$package
-	CROSS_PARAMS="--build=`./config.guess` --host=$CROSSBUILD"
-else
-	prefix=$INSTALLDIR/$package
-fi
 
 if [ "$BUILD_DKPRO_AUTOMATED" != "1" ] ; then
 
@@ -167,24 +142,26 @@ PLATFORM=`uname -s`
 
 case $PLATFORM in
 	Darwin )
-		cflags="-mmacosx-version-min=${OSXMIN} -I/usr/local/include"
+		cppflags="-mmacosx-version-min=${OSXMIN} -I/usr/local/include"
 		ldflags="-mmacosx-version-min=${OSXMIN} -L/usr/local/lib"
 		if [ "x${OSXSDKPATH}x" != "xx" ]; then
-			cflags="$cflags -isysroot ${OSXSDKPATH}"
+			cppflags="$cppflags -isysroot ${OSXSDKPATH}"
 			ldflags="$ldflags -Wl,-syslibroot,${OSXSDKPATH}"
 		fi
 		TESTCC=`cc -v 2>&1 | grep clang`
 		if [ "x${TESTCC}x" != "xx" ]; then
-			cflags="$cflags -fbracket-depth=512"
+			cppflags="$cppflags -fbracket-depth=512"
 		fi
     ;;
 	MINGW32* )
-		cflags="-D__USE_MINGW_ACCESS"
+		cppflags="-D__USE_MINGW_ACCESS -D__USE_MINGW_ANSI_STDIO=1"
-# horrid hack to get -flto to work on windows
-		plugin_ld="--with-plugin-ld=ld"
     ;;
 esac
 
+if [ ! -z $CROSSBUILD ] && grep -q "mingw" <<<"$CROSSBUILD" ; then
+	cppflags="-D__USE_MINGW_ACCESS -D__USE_MINGW_ANSI_STDIO=1"
+fi
+
 
 BUILDSCRIPTDIR=$(pwd)
 BUILDDIR=$(pwd)/.$package
@@ -196,31 +173,25 @@ fi
 patchdir=$(pwd)/$basedir/patches
 scriptdir=$(pwd)/$basedir/scripts
 
-archives="binutils-${BINUTILS_VER}.tar.bz2 gcc-${GCC_VER}.tar.bz2 newlib-${NEWLIB_VER}.tar.gz gdb-${GDB_VER}.tar.bz2"
+archives="binutils-${BINUTILS_VER}.tar.xz gcc-${GCC_VER}.tar.xz newlib-${NEWLIB_VER}.tar.gz"
-
-if [ $VERSION -eq 1 ]; then
-
-	targetarchives="libnds-src-${LIBNDS_VER}.tar.bz2 libgba-src-${LIBGBA_VER}.tar.bz2
-		libmirko-src-${LIBMIRKO_VER}.tar.bz2 dswifi-src-${DSWIFI_VER}.tar.bz2 maxmod-src-${MAXMOD_VER}.tar.bz2
-		default_arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
-		libfat-src-${LIBFAT_VER}.tar.bz2 libctru-src-${LIBCTRU_VER}.tar.bz2  citro3d-src-${CITRO3D_VER}.tar.bz2"
-
-	hostarchives="gbatools-$GBATOOLS_VER.tar.bz2 gp32tools-$GP32_TOOLS_VER.tar.bz2
-		dstools-$DSTOOLS_VER.tar.bz2 grit-$GRIT_VER.tar.bz2 ndstool-$NDSTOOL_VER.tar.bz2
-		general-tools-$GENERAL_TOOLS_VER.tar.bz2 dlditool-$DLDITOOL_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2
-		dfu-util-$DFU_UTIL_VER.tar.bz2 stlink-$STLINK_VER.tar.bz2 3dstools-$TOOLS3DS_VER.tar.bz2
-		picasso-$PICASSO_VER.tar.bz2 3dslink-$LINK3DS_VER.tar.bz2"
-fi
 
 if [ $VERSION -eq 2 ]; then
-
-	targetarchives="libogc-src-${LIBOGC_VER}.tar.bz2 libfat-src-${LIBFAT_VER}.tar.bz2"
-
-	hostarchives="gamecube-tools-$GAMECUBE_TOOLS_VER.tar.bz2 wiiload-$WIILOAD_VER.tar.bz2 general-tools-$GENERAL_TOOLS_VER.tar.bz2"
-
 	archives="binutils-${MN_BINUTILS_VER}.tar.bz2 $archives"
 fi
 
+if [ "$BUILD_DKPRO_SKIP_CRTLS" != "1" ]; then
+	if [ $VERSION -eq 1 ]; then
+		archives="devkitarm-rules-$DKARM_RULES_VER.tar.gz devkitarm-crtls-$DKARM_CRTLS_VER.tar.gz $archives"
+	fi
+
+	if [ $VERSION -eq 2 ]; then
+		archives="devkitppc-rules-$DKPPC_RULES_VER.tar.gz $archives"
+	fi
+
+	if [ $VERSION -eq 3 ]; then
+		archives="devkita64-rules-$DKA64_RULES_VER.tar.gz $archives"
+	fi
+fi
 
 if [ ! -z "$BUILD_DKPRO_SRCDIR" ] ; then
 	SRCDIR="$BUILD_DKPRO_SRCDIR"
@@ -229,11 +200,11 @@ else
 fi
 
 cd "$SRCDIR"
-for archive in $archives $targetarchives $hostarchives
+for archive in $archives
 do
 	echo $archive
 	if [ ! -f $archive ]; then
-		$FETCH https://github.com/devkitPro/buildscripts/releases/download/sources/$archive || { echo "Error: Failed to download $archive"; exit 1; }
+		$FETCH https://downloads.devkitpro.org/$archive || { echo "Error: Failed to download $archive"; exit 1; }
 	fi
 done
 
@@ -241,52 +212,28 @@ cd $BUILDSCRIPTDIR
 mkdir -p $BUILDDIR
 cd $BUILDDIR
 
-extract_and_patch binutils $BINUTILS_VER bz2
+extract_and_patch binutils $BINUTILS_VER xz
-extract_and_patch gcc $GCC_VER bz2
+extract_and_patch gcc $GCC_VER xz
 extract_and_patch newlib $NEWLIB_VER gz
-extract_and_patch gdb $GDB_VER bz2
 
-if [ $VERSION -eq 2 ]; then
+if [ $VERSION -eq 2 ]; then extract_and_patch binutils $MN_BINUTILS_VER bz2; fi
-	extract_and_patch binutils $MN_BINUTILS_VER bz2
-fi
-
-for archive in $targetarchives
-do
-	destdir=$(echo $archive | sed -e 's/\(.*\)-src-\(.*\)\.tar\.bz2/\1-\2/' )
-	echo $destdir
-	if [ ! -d $destdir ]; then
-		mkdir -p $destdir
-		bzip2 -cd "$SRCDIR/$archive" | tar -xf - -C $destdir || { echo "Error extracting "$archive; exit 1; }
-	fi
-done
-
-for archive in $hostarchives
-do
-	destdir=$(echo $archive | sed -e 's/\(.*\)-src-\(.*\)\.tar\.bz2/\1-\2/' )
-	if [ ! -d $destdir ]; then
-		tar -xjf "$SRCDIR/$archive"
-	fi
-done
 
 #---------------------------------------------------------------------------------
 # Build and install devkit components
 #---------------------------------------------------------------------------------
 if [ -f $scriptdir/build-gcc.sh ]; then . $scriptdir/build-gcc.sh || { echo "Error building toolchain"; exit 1; }; cd $BUILDSCRIPTDIR; fi
-if [ -f $scriptdir/build-tools.sh ]; then . $scriptdir/build-tools.sh || { echo "Error building tools"; exit 1; }; cd $BUILDSCRIPTDIR; fi
-if [ -f $scriptdir/build-crtls.sh ]; then . $scriptdir/build-crtls.sh || { echo "Error building crtls"; exit 1; }; cd $BUILDSCRIPTDIR; fi
 
-if [ ! -z $CROSSBUILD ]; then
+
-	if [ $VERSION -ne 3 ]; then
+if [ "$BUILD_DKPRO_SKIP_CRTLS" != "1" ] && [ -f $scriptdir/build-crtls.sh ]; then
-		cp -v $CROSSBINPATH/FreeImage.dll $prefix/bin
+  . $scriptdir/build-crtls.sh || { echo "Error building crtls & rules"; exit 1; }; cd $BUILDSCRIPTDIR;
-	fi
-	if [ $VERSION -eq 1 ]; then
-		cp -v $CROSSBINPATH/libusb-1.0.dll $prefix/bin
-	fi
-	cp -v	$CROSSLIBPATH/*.dll $prefix/bin
 fi
 
-echo "stripping installed binaries"
+cd $BUILDSCRIPTDIR
-. ./strip_bins.sh
+
+if [ "$BUILD_DKPRO_NO_STRIP_BINARIES" != "1" ]; then
+	echo "stripping installed binaries"
+	. ./strip_bins.sh
+fi
 
 #---------------------------------------------------------------------------------
 # Clean up temporary files and source directories
@@ -310,5 +257,13 @@ fi
 
 
 echo
-echo "note: Add the following to your environment;  DEVKITPRO=$TOOLPATH $toolchain=$TOOLPATH/$package"
+echo "note: Add the following to your environment;"
+echo
+echo "  DEVKITPRO=$TOOLPATH"
+if [ "$toolchain" != "DEVKITA64" ]; then
+echo "  $toolchain=$TOOLPATH/$package"
+fi
+echo
+echo "add $TOOLPATH/tools/bin to your PATH"
+echo
 echo

config.sh.sample

@@ -9,7 +9,7 @@
 #   0: User selects manually
 #   1: devkitARM
 #   2: devkitPPC
-#   3: devkitPSP
+#   3: devkitA64
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_PACKAGE=0
 
@@ -31,6 +31,10 @@ BUILD_DKPRO_PACKAGE=0
 #export MAKEFLAGS="$MAKEFLAGS -j${numcores}"
 
 #---------------------------------------------------------------------------------
+# Uncomment to skip building of crtls and rules files
+#---------------------------------------------------------------------------------
+#BUILD_DKPRO_SKIP_CRTLS=1
+
 # Automated script execution
 #---------------------------------------------------------------------------------
 #  0: Ask to delete build folders & patched sources
@@ -38,7 +42,6 @@ BUILD_DKPRO_PACKAGE=0
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_AUTOMATED=0
 
-
 #---------------------------------------------------------------------------------
 # set OSX SDK path if needed
 #---------------------------------------------------------------------------------

cross-build-i686-w64-mingw32.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-export CROSSBUILD=i686-w64-mingw32
-export CROSSLIBPATH=/opt/mingw32/mingw/lib
-export CROSSBINPATH=/opt/mingw32/mingw/bin
-export PATH=/opt/mingw32/bin:$PATH
-export PKG_CONFIG_PATH=
-export PKG_CONFIG_LIBDIR=$CROSSLIBPATH/pkgconfig

cross-build-x86_64-w64-mingw32.sh

@@ -1,9 +0,0 @@
-#!/bin/bash
-export CROSSBUILD=x86_64-w64-mingw32
-export CROSSPATH=/opt/mingw64/mingw
-export CROSSLIBPATH=$CROSSPATH/lib
-export CROSSBINPATH=$CROSSPATH/bin
-export PATH=/opt/mingw64/bin:$PATH
-export PKG_CONFIG_PATH=
-export PKG_CONFIG_LIBDIR=$CROSSLIBPATH/pkgconfig
-

dka64/patches/binutils-2.32.patch

@@ -0,0 +1,604 @@
+diff --git a/bfd/elf-bfd.h b/bfd/elf-bfd.h
+index 5741c60264..fb5d9d069c 100644
+--- a/bfd/elf-bfd.h
++++ b/bfd/elf-bfd.h
+@@ -1789,6 +1789,14 @@ struct output_elf_obj_tdata
+     asection *sec;
+   } build_id;
+ 
++  /* Data for .nx-module-name. */
++  struct
++  {
++    bfd_boolean (*after_write_object_contents) (bfd *);
++    const char *name;
++    asection *sec;
++  } nx_module_name;
++
+   /* Records the result of `get_program_header_size'.  */
+   bfd_size_type program_header_size;
+ 
+diff --git a/bfd/elf.c b/bfd/elf.c
+index eb3e1828e9..bc6bb48804 100644
+--- a/bfd/elf.c
++++ b/bfd/elf.c
+@@ -6514,6 +6514,14 @@ _bfd_elf_write_object_contents (bfd *abfd)
+   if (!bed->s->write_shdrs_and_ehdr (abfd))
+     return FALSE;
+ 
++  /* Write out the NX module name. */
++  if (t->o->nx_module_name.after_write_object_contents != NULL)
++    {
++      failed = !(*t->o->nx_module_name.after_write_object_contents) (abfd);
++      if (failed)
++        return FALSE;
++    }
++
+   /* This is last since write_shdrs_and_ehdr can touch i_shdrp[0].  */
+   if (t->o->build_id.after_write_object_contents != NULL)
+     return (*t->o->build_id.after_write_object_contents) (abfd);
+diff --git a/bfd/elfnn-aarch64.c b/bfd/elfnn-aarch64.c
+index faa27611d4..888af6bcd8 100644
+--- a/bfd/elfnn-aarch64.c
++++ b/bfd/elfnn-aarch64.c
+@@ -2341,6 +2341,12 @@ enum elf_aarch64_stub_type
+   aarch64_stub_erratum_843419_veneer,
+ };
+ 
++/* Is an undefined weak symbol resolved to 0 ? */
++#define UNDEFINED_WEAK_RESOLVED_TO_ZERO(INFO, EH)               \
++  ((EH)->root.root.type == bfd_link_hash_undefweak              \
++   && bfd_link_executable (INFO)                                \
++   && !(INFO)->dynamic_undefined_weak)
++
+ struct elf_aarch64_stub_hash_entry
+ {
+   /* Base hash table entry structure.  */
+@@ -6436,11 +6442,13 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+       Elf_Internal_Sym *sym;
+       asection *sec;
+       struct elf_link_hash_entry *h;
++      struct elf_aarch64_link_hash_entry *eh;
+       bfd_vma relocation;
+       bfd_reloc_status_type r;
+       arelent bfd_reloc;
+       char sym_type;
+       bfd_boolean unresolved_reloc = FALSE;
++      bfd_boolean resolved_to_zero = FALSE;
+       char *error_message = NULL;
+ 
+       r_symndx = ELFNN_R_SYM (rel->r_info);
+@@ -6576,6 +6584,10 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+ 					       h, &unresolved_reloc,
+ 					       save_addend, &addend, sym);
+ 
++      eh = (struct elf_aarch64_link_hash_entry *) h;
++      resolved_to_zero = (eh != NULL
++                          && UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh));
++
+       switch (elfNN_aarch64_bfd_reloc_from_type (input_bfd, r_type))
+ 	{
+ 	case BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC:
+@@ -6599,7 +6611,7 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+ 	      need_relocs =
+ 		(!bfd_link_executable (info) || indx != 0) &&
+ 		(h == NULL
+-		 || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++		 || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 		 || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6694,7 +6706,7 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+ 	      need_relocs =
+ 		(!bfd_link_executable (info) || indx != 0) &&
+ 		(h == NULL
+-		 || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++		 || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 		 || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6743,7 +6755,7 @@ elfNN_aarch64_relocate_section (bfd *output_bfd,
+ 	      bfd_vma off = symbol_tlsdesc_got_offset (input_bfd, h, r_symndx);
+ 
+ 	      need_relocs = (h == NULL
+-			     || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++			     || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 			     || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -7086,6 +7098,26 @@ need_copy_relocation_p (struct elf_aarch64_link_hash_entry *eh)
+   return FALSE;
+ }
+ 
++/* Remove undefined weak symbol from the dynamic symbol table if it
++   is resolved to 0.   */
++
++extern bfd_boolean
++elfNN_aarch64_elf_fixup_symbol (struct bfd_link_info *, struct elf_link_hash_entry *);
++
++bfd_boolean
++elfNN_aarch64_elf_fixup_symbol (struct bfd_link_info *info,
++                             struct elf_link_hash_entry *h)
++{
++  if (h->dynindx != -1
++      && UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, elf_aarch64_hash_entry (h)))
++    {
++      h->dynindx = -1;
++      _bfd_elf_strtab_delref (elf_hash_table (info)->dynstr,
++                              h->dynstr_index);
++    }
++  return TRUE;
++}
++
+ /* Adjust a symbol defined by a dynamic object and referenced by a
+    regular object.  The current definition is in some section of the
+    dynamic object, but we're not including those sections.  We have to
+@@ -8286,6 +8318,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+   struct elf_aarch64_link_hash_table *htab;
+   struct elf_aarch64_link_hash_entry *eh;
+   struct elf_dyn_relocs *p;
++  bfd_boolean resolved_to_zero;
+ 
+   /* An example of a bfd_link_hash_indirect symbol is versioned
+      symbol. For example: __gxx_personality_v0(bfd_link_hash_indirect)
+@@ -8305,6 +8338,10 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+   info = (struct bfd_link_info *) inf;
+   htab = elf_aarch64_hash_table (info);
+ 
++  eh = (struct elf_aarch64_link_hash_entry *) h;
++  eh->tlsdesc_got_jump_table_offset = (bfd_vma) - 1;
++  resolved_to_zero = UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh);
++
+   /* Since STT_GNU_IFUNC symbol must go through PLT, we handle it
+      here if it is defined and referenced in a non-shared object.  */
+   if (h->type == STT_GNU_IFUNC
+@@ -8314,7 +8351,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+     {
+       /* Make sure this symbol is output as a dynamic symbol.
+ 	 Undefined weak syms won't yet be marked as dynamic.  */
+-      if (h->dynindx == -1 && !h->forced_local
++      if (h->dynindx == -1 && !h->forced_local && !resolved_to_zero
+ 	  && h->root.type == bfd_link_hash_undefweak)
+ 	{
+ 	  if (!bfd_elf_link_record_dynamic_symbol (info, h))
+@@ -8348,6 +8385,11 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	     of relaxing into these from the large model PLT entries.  */
+ 	  s->size += PLT_SMALL_ENTRY_SIZE;
+ 
++          /* There should be no PLT relocations against resolved undefined
++             weak symbols in the executable.  */
++          if (!resolved_to_zero)
++            {
++
+ 	  /* We also need to make an entry in the .got.plt section, which
+ 	     will be placed in the .got section by the linker script.  */
+ 	  htab->root.sgotplt->size += GOT_ENTRY_SIZE;
+@@ -8370,6 +8412,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 
+ 	  htab->root.srelplt->reloc_count++;
+ 	}
++	}
+       else
+ 	{
+ 	  h->plt.offset = (bfd_vma) - 1;
+@@ -8382,9 +8425,6 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+       h->needs_plt = 0;
+     }
+ 
+-  eh = (struct elf_aarch64_link_hash_entry *) h;
+-  eh->tlsdesc_got_jump_table_offset = (bfd_vma) - 1;
+-
+   if (h->got.refcount > 0)
+     {
+       bfd_boolean dyn;
+@@ -8396,7 +8436,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 
+       /* Make sure this symbol is output as a dynamic symbol.
+ 	 Undefined weak syms won't yet be marked as dynamic.  */
+-      if (dyn && h->dynindx == -1 && !h->forced_local
++      if (dyn && h->dynindx == -1 && !h->forced_local && !resolved_to_zero
+ 	  && h->root.type == bfd_link_hash_undefweak)
+ 	{
+ 	  if (!bfd_elf_link_record_dynamic_symbol (info, h))
+@@ -8410,7 +8450,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	{
+ 	  h->got.offset = htab->root.sgot->size;
+ 	  htab->root.sgot->size += GOT_ENTRY_SIZE;
+-	  if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++	  if (((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 	       || h->root.type != bfd_link_hash_undefweak)
+ 	      && (bfd_link_pic (info)
+ 		  || WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, 0, h))
+@@ -8446,7 +8486,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	    }
+ 
+ 	  indx = h && h->dynindx != -1 ? h->dynindx : 0;
+-	  if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++	  if (((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 	       || h->root.type != bfd_link_hash_undefweak)
+ 	      && (!bfd_link_executable (info)
+ 		  || indx != 0
+@@ -8512,7 +8552,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	 visibility.  */
+       if (eh->dyn_relocs != NULL && h->root.type == bfd_link_hash_undefweak)
+ 	{
+-	  if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT
++	  if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT || resolved_to_zero
+ 	      || UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
+ 	    eh->dyn_relocs = NULL;
+ 
+@@ -8532,7 +8572,9 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	 symbols which turn out to need copy relocs or are not
+ 	 dynamic.  */
+ 
+-      if (!h->non_got_ref
++      if (!(h->non_got_ref
++           || (h->root.type == bfd_link_hash_undefweak
++               && !resolved_to_zero))
+ 	  && ((h->def_dynamic
+ 	       && !h->def_regular)
+ 	      || (htab->root.dynamic_sections_created
+@@ -8543,6 +8585,7 @@ elfNN_aarch64_allocate_dynrelocs (struct elf_link_hash_entry *h, void *inf)
+ 	     Undefined weak syms won't yet be marked as dynamic.  */
+ 	  if (h->dynindx == -1
+ 	      && !h->forced_local
++	      && !resolved_to_zero
+ 	      && h->root.type == bfd_link_hash_undefweak
+ 	      && !bfd_elf_link_record_dynamic_symbol (info, h))
+ 	    return FALSE;
+@@ -9163,8 +9206,17 @@ elfNN_aarch64_finish_dynamic_symbol (bfd *output_bfd,
+ 				     Elf_Internal_Sym *sym)
+ {
+   struct elf_aarch64_link_hash_table *htab;
++  struct elf_aarch64_link_hash_entry *eh;
++  bfd_boolean local_undefweak;
+   htab = elf_aarch64_hash_table (info);
+ 
++  eh = (struct elf_aarch64_link_hash_entry *) h;
++
++  /* We keep PLT/GOT entries without dynamic PLT/GOT relocations for
++     resolved undefined weak symbols in executable so that their
++     references have value 0 at run-time.  */
++  local_undefweak = UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh);
++
+   if (h->plt.offset != (bfd_vma) - 1)
+     {
+       asection *plt, *gotplt, *relplt;
+@@ -9199,7 +9251,7 @@ elfNN_aarch64_finish_dynamic_symbol (bfd *output_bfd,
+ 	return FALSE;
+ 
+       elfNN_aarch64_create_small_pltn_entry (h, htab, output_bfd, info);
+-      if (!h->def_regular)
++      if (!local_undefweak && !h->def_regular)
+ 	{
+ 	  /* Mark the symbol as undefined, rather than as defined in
+ 	     the .plt section.  */
+@@ -9218,10 +9270,11 @@ elfNN_aarch64_finish_dynamic_symbol (bfd *output_bfd,
+     }
+ 
+   if (h->got.offset != (bfd_vma) - 1
+-      && elf_aarch64_hash_entry (h)->got_type == GOT_NORMAL
++      && elf_aarch64_hash_entry (h)->got_type == GOT_NORMAL 
+       /* Undefined weak symbol in static PIE resolves to 0 without
+ 	 any dynamic relocations.  */
+-      && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
++      && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h)
++      && !local_undefweak)
+     {
+       Elf_Internal_Rela rela;
+       bfd_byte *loc;
+@@ -9715,6 +9768,9 @@ const struct elf_size_info elfNN_aarch64_size_info =
+ #define elf_backend_init_index_section		\
+   _bfd_elf_init_2_index_sections
+ 
++#define elf_backend_fixup_symbol		\
++  elfNN_aarch64_elf_fixup_symbol
++
+ #define elf_backend_finish_dynamic_sections	\
+   elfNN_aarch64_finish_dynamic_sections
+ 
+diff --git a/ld/Makefile.am b/ld/Makefile.am
+index c2c798b4fe..a0073d27fe 100644
+--- a/ld/Makefile.am
++++ b/ld/Makefile.am
+@@ -1509,19 +1509,23 @@ ens32knbsd.c:	$(srcdir)/emulparams/ns32knbsd.sh \
+   $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf.c: $(srcdir)/emulparams/aarch64elf.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32.c: $(srcdir)/emulparams/aarch64elf32.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elfb.c: $(srcdir)/emulparams/aarch64elfb.sh $(srcdir)/emulparams/aarch64elf.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32b.c: $(srcdir)/emulparams/aarch64elf32b.sh $(srcdir)/emulparams/aarch64elf32.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64cloudabi.c: $(srcdir)/emulparams/aarch64cloudabi.sh \
+diff --git a/ld/Makefile.in b/ld/Makefile.in
+index fc687fc516..7d85865d92 100644
+--- a/ld/Makefile.in
++++ b/ld/Makefile.in
+@@ -3114,18 +3114,22 @@ ens32knbsd.c:	$(srcdir)/emulparams/ns32knbsd.sh \
+ 
+ eaarch64elf.c: $(srcdir)/emulparams/aarch64elf.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32.c: $(srcdir)/emulparams/aarch64elf32.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elfb.c: $(srcdir)/emulparams/aarch64elfb.sh $(srcdir)/emulparams/aarch64elf.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32b.c: $(srcdir)/emulparams/aarch64elf32b.sh $(srcdir)/emulparams/aarch64elf32.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64cloudabi.c: $(srcdir)/emulparams/aarch64cloudabi.sh \
+diff --git a/ld/emulparams/aarch64elf.sh b/ld/emulparams/aarch64elf.sh
+index 4a59342722..2aa1ec7712 100644
+--- a/ld/emulparams/aarch64elf.sh
++++ b/ld/emulparams/aarch64elf.sh
+@@ -1,3 +1,5 @@
++. ${srcdir}/emulparams/dynamic_undefined_weak.sh
++
+ ARCH=aarch64
+ MACHINE=
+ NOP=0x1f2003d5
+diff --git a/ld/emulparams/aarch64elf32.sh b/ld/emulparams/aarch64elf32.sh
+index 38bcd4bbb0..da0f411feb 100644
+--- a/ld/emulparams/aarch64elf32.sh
++++ b/ld/emulparams/aarch64elf32.sh
+@@ -1,3 +1,5 @@
++. ${srcdir}/emulparams/dynamic_undefined_weak.sh
++
+ ARCH="aarch64:ilp32"
+ MACHINE=
+ NOP=0x1f2003d5
+diff --git a/ld/emultempl/aarch64elf.em b/ld/emultempl/aarch64elf.em
+index 45e40b510c..916ef2086a 100644
+--- a/ld/emultempl/aarch64elf.em
++++ b/ld/emultempl/aarch64elf.em
+@@ -380,7 +380,7 @@ PARSE_AND_LIST_LONGOPTS='
+   { "no-apply-dynamic-relocs", no_argument, NULL, OPTION_NO_APPLY_DYNAMIC_RELOCS},
+ '
+ 
+-PARSE_AND_LIST_OPTIONS='
++PARSE_AND_LIST_OPTIONS=${PARSE_AND_LIST_OPTIONS}'
+   fprintf (file, _("  --no-enum-size-warning      Don'\''t warn about objects with incompatible\n"
+ 		   "                                enum sizes\n"));
+   fprintf (file, _("  --no-wchar-size-warning     Don'\''t warn about objects with incompatible\n"
+diff --git a/ld/emultempl/elf32.em b/ld/emultempl/elf32.em
+index f4f7ad6b4e..8428a54697 100644
+--- a/ld/emultempl/elf32.em
++++ b/ld/emultempl/elf32.em
+@@ -192,6 +192,9 @@ static char *depaudit; /* colon (typically) separated list of libs */
+ /* Style of .note.gnu.build-id section.  */
+ static const char *emit_note_gnu_build_id;
+ 
++/* NX module name. */
++static const char *emit_nx_module_name;
++
+ /* On Linux, it's possible to have different versions of the same
+    shared library linked against different versions of libc.  The
+    dynamic linker somehow tags which libc version to use in
+@@ -1217,6 +1220,92 @@ setup_build_id (bfd *ibfd)
+   return FALSE;
+ }
+ 
++static bfd_boolean
++write_nx_module_name (bfd *abfd)
++{
++  struct elf_obj_tdata *t = elf_tdata (abfd);
++  const char *name;
++  asection *asec;
++  Elf_Internal_Shdr *i_shdr;
++  unsigned char *contents;
++  bfd_size_type size;
++  file_ptr position;
++
++  name = t->o->nx_module_name.name;
++  asec = t->o->nx_module_name.sec;
++  if (bfd_is_abs_section (asec->output_section))
++    {
++      einfo (_("%P: warning: .nx-module-name section discarded,"
++	       " --build-id ignored\n"));
++      return TRUE;
++    }
++  i_shdr = &elf_section_data (asec->output_section)->this_hdr;
++
++  if (i_shdr->contents == NULL)
++    {
++      if (asec->contents == NULL)
++	asec->contents = (unsigned char *) xmalloc (asec->size);
++      contents = asec->contents;
++    }
++  else
++    contents = i_shdr->contents + asec->output_offset;
++
++  size = asec->size;
++  bfd_h_put_32 (abfd, 0, &contents[0]);
++  bfd_h_put_32 (abfd, size - 9, &contents[4]);
++  memcpy (&contents[8], name, size - 9);
++  contents[size - 1] = 0; /* ensure null termination for AMS */
++
++  position = i_shdr->sh_offset + asec->output_offset;
++
++  return (bfd_seek (abfd, position, SEEK_SET) == 0
++	  && bfd_bwrite (contents, size, abfd) == size);
++}
++
++/* Make .nx-module-name section, and set up elf_tdata->nx_module_name.  */
++
++static bfd_boolean
++setup_nx_module_name (bfd *ibfd, bfd *obfd)
++{
++  asection *s;
++  bfd_size_type size;
++  flagword flags;
++
++  if (emit_nx_module_name[0] == '\0')
++    {
++      /* Extract the basename of the output bfd and use it as the module name. */
++      char *dot_pos;
++      free ((char *) emit_nx_module_name);
++      emit_nx_module_name = (char *) lbasename (bfd_get_filename (obfd));
++      emit_nx_module_name = xstrdup (emit_nx_module_name);
++      dot_pos = strrchr (emit_nx_module_name, '.');
++      if (dot_pos != NULL)
++        {
++          /* Remove extension. */
++          *dot_pos = 0;
++        }
++    }
++
++  size = 8 + strlen(emit_nx_module_name) + 1; /* extra null terminator for AMS */
++  flags = (SEC_ALLOC | SEC_LOAD | SEC_IN_MEMORY
++	   | SEC_LINKER_CREATED | SEC_READONLY | SEC_DATA);
++  s = bfd_make_section_with_flags (ibfd, ".nx-module-name", flags);
++  if (s != NULL && bfd_set_section_alignment (ibfd, s, 4))
++    {
++      struct elf_obj_tdata *t = elf_tdata (link_info.output_bfd);
++      t->o->nx_module_name.after_write_object_contents = &write_nx_module_name;
++      t->o->nx_module_name.name = emit_nx_module_name;
++      t->o->nx_module_name.sec = s;
++      elf_section_type (s) = SHT_PROGBITS;
++      s->size = size;
++      return TRUE;
++    }
++
++  einfo (_("%P: warning: cannot create .nx-module-name section,"
++	   " --nx-module-name ignored\n"));
++  return FALSE;
++}
++
+ /* This is called after all the input files have been opened.  */
+ 
+ static void
+@@ -1267,6 +1356,24 @@ gld${EMULATION_NAME}_after_open (void)
+ 	}
+     }
+ 
++  if (emit_nx_module_name != NULL)
++    {
++      /* Find an ELF input.  */
++      for (abfd = link_info.input_bfds;
++        abfd != (bfd *) NULL; abfd = abfd->link.next)
++        if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
++            && bfd_count_sections (abfd) != 0
++            && !((lang_input_statement_type *) abfd->usrdata)->flags.just_syms)
++          break;
++
++      /* If there are no ELF input files do not try to create a .nx-module-name section. */
++      if (abfd == NULL || !setup_nx_module_name (abfd, link_info.output_bfd))
++        {
++          free ((char *) emit_nx_module_name);
++          emit_nx_module_name = NULL;
++        }
++    }
++
+   get_elf_backend_data (link_info.output_bfd)->setup_gnu_properties (&link_info);
+ 
+   if (bfd_link_relocatable (&link_info))
+@@ -2720,6 +2827,7 @@ enum elf_options
+   OPTION_EXCLUDE_LIBS,
+   OPTION_HASH_STYLE,
+   OPTION_BUILD_ID,
++  OPTION_NX_MODULE_NAME,
+   OPTION_AUDIT,
+   OPTION_COMPRESS_DEBUG
+ };
+@@ -2750,6 +2858,7 @@ EOF
+ fi
+ fragment <<EOF
+     {"build-id", optional_argument, NULL, OPTION_BUILD_ID},
++    {"nx-module-name", optional_argument, NULL, OPTION_NX_MODULE_NAME},
+     {"compress-debug-sections", required_argument, NULL, OPTION_COMPRESS_DEBUG},
+ EOF
+ if test x"$GENERATE_SHLIB_SCRIPT" = xyes; then
+@@ -2814,6 +2923,16 @@ gld${EMULATION_NAME}_handle_option (int optc)
+ 	einfo (_("%F%P: invalid --compress-debug-sections option: \`%s'\n"),
+ 	       optarg);
+       break;
++    case OPTION_NX_MODULE_NAME:
++      if (emit_nx_module_name != NULL)
++        {
++          free ((char *) emit_nx_module_name);
++          emit_nx_module_name = NULL;
++        }
++      if (optarg == NULL)
++        optarg = "";
++      emit_nx_module_name = xstrdup (optarg);
++      break;
+ EOF
+ 
+ if test x"$GENERATE_SHLIB_SCRIPT" = xyes; then
+diff --git a/ld/ldgram.y b/ld/ldgram.y
+index c3eadeb392..59ab143526 100644
+--- a/ld/ldgram.y
++++ b/ld/ldgram.y
+@@ -819,6 +819,7 @@ origin_spec:
+ 	ORIGIN '=' mustbe_exp
+ 		{
+ 		  region->origin_exp = $3;
++		  region->current = region->origin;
+ 		}
+ 	;
+ 
+diff --git a/ld/ldlang.c b/ld/ldlang.c
+index 33f6bda292..7161f4210a 100644
+--- a/ld/ldlang.c
++++ b/ld/ldlang.c
+@@ -7381,9 +7381,6 @@ lang_process (void)
+   current_target = default_target;
+   lang_statement_iteration++;
+   open_input_bfds (statement_list.head, OPEN_BFD_NORMAL);
+-  /* open_input_bfds also handles assignments, so we can give values
+-     to symbolic origin/length now.  */
+-  lang_do_memory_regions ();
+ 
+ #ifdef ENABLE_PLUGINS
+   if (link_info.lto_plugin_active)
+@@ -7526,6 +7523,8 @@ lang_process (void)
+   /* PR 13683: We must rerun the assignments prior to running garbage
+      collection in order to make sure that all symbol aliases are resolved.  */
+   lang_do_assignments (lang_mark_phase_enum);
++
++  lang_do_memory_regions();
+   expld.phase = lang_first_phase_enum;
+ 
+   /* Size up the common data.  */
+@@ -7610,11 +7609,8 @@ lang_process (void)
+   /* Fix any __start, __stop, .startof. or .sizeof. symbols.  */
+   lang_finalize_start_stop ();
+ 
+-  /* Do all the assignments again, to report errors.  Assignment
+-     statements are processed multiple times, updating symbols; In
+-     open_input_bfds, lang_do_assignments, and lang_size_sections.
+-     Since lang_relax_sections calls lang_do_assignments, symbols are
+-     also updated in ldemul_after_allocation.  */
++  /* Do all the assignments, now that we know the final resting places
++     of all the symbols.  */
+   lang_do_assignments (lang_final_phase_enum);
+ 
+   ldemul_finish ();

dka64/patches/gcc-13.1.0.patch

@@ -0,0 +1,377 @@
+diff --git a/gcc/config.gcc b/gcc/config.gcc
+index 6fd1594480a..31deea1c63b 100644
+--- a/gcc/config.gcc
++++ b/gcc/config.gcc
+@@ -1132,7 +1132,14 @@ aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
+ 	tmake_file="${tmake_file} aarch64/t-aarch64"
+ 	case $target in
+ 	aarch64-*-elf*)
++		default_use_cxa_atexit=yes
+ 		use_gcc_stdint=wrap
++		tm_file="${tm_file} devkitpro.h"
++		tm_defines="${tm_defines}  TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
++		extra_options="${extra_options} devkitpro.opt"
++		case ${enable_threads} in
++			"" | yes | posix) thread_file='posix' ;;
++		esac
+ 		;;
+         aarch64-*-fuchsia*)
+                 tm_file="${tm_file} fuchsia.h"
+diff --git a/gcc/config/aarch64/aarch64-builtins.cc b/gcc/config/aarch64/aarch64-builtins.cc
+index cc6b7c01fd1..44d53659a2f 100644
+--- a/gcc/config/aarch64/aarch64-builtins.cc
++++ b/gcc/config/aarch64/aarch64-builtins.cc
+@@ -1547,7 +1547,7 @@ aarch64_scalar_builtin_type_p (aarch64_simd_type t)
+ 
+ /* Enable AARCH64_FL_* flags EXTRA_FLAGS on top of the base Advanced SIMD
+    set.  */
+-aarch64_simd_switcher::aarch64_simd_switcher (unsigned int extra_flags)
++aarch64_simd_switcher::aarch64_simd_switcher (uint64_t extra_flags)
+   : m_old_asm_isa_flags (aarch64_asm_isa_flags),
+     m_old_general_regs_only (TARGET_GENERAL_REGS_ONLY)
+ {
+diff --git a/gcc/config/aarch64/aarch64-elf-raw.h b/gcc/config/aarch64/aarch64-elf-raw.h
+index ec45f23fa41..a208eabd806 100644
+--- a/gcc/config/aarch64/aarch64-elf-raw.h
++++ b/gcc/config/aarch64/aarch64-elf-raw.h
+@@ -22,6 +22,7 @@
+ #ifndef GCC_AARCH64_ELF_RAW_H
+ #define GCC_AARCH64_ELF_RAW_H
+ 
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
+ #define STARTFILE_SPEC " crti%O%s crtbegin%O%s crt0%O%s"
+ #define ENDFILE_SPEC \
+   " crtend%O%s crtn%O%s " \
+diff --git a/gcc/config/aarch64/aarch64-opts.h b/gcc/config/aarch64/aarch64-opts.h
+index a9f3e2715ca..0c7304e1d81 100644
+--- a/gcc/config/aarch64/aarch64-opts.h
++++ b/gcc/config/aarch64/aarch64-opts.h
+@@ -52,6 +52,12 @@ enum aarch64_tls_type {
+   TLS_DESCRIPTORS
+ };
+ 
++/* Which thread pointer access sequence to use.  */
++enum aarch64_tp_type {
++  TP_HARD,
++  TP_SOFT
++};
++
+ /* The code model defines the address generation strategy.
+    Most have a PIC and non-PIC variant.  */
+ enum aarch64_code_model {
+diff --git a/gcc/config/aarch64/aarch64-protos.h b/gcc/config/aarch64/aarch64-protos.h
+index 63339fa47df..02b4d3cbb8f 100644
+--- a/gcc/config/aarch64/aarch64-protos.h
++++ b/gcc/config/aarch64/aarch64-protos.h
+@@ -733,11 +733,11 @@ const unsigned int AARCH64_BUILTIN_CLASS = (1 << AARCH64_BUILTIN_SHIFT) - 1;
+ class aarch64_simd_switcher
+ {
+ public:
+-  aarch64_simd_switcher (unsigned int extra_flags = 0);
++  aarch64_simd_switcher (uint64_t extra_flags = 0);
+   ~aarch64_simd_switcher ();
+ 
+ private:
+-  unsigned long m_old_asm_isa_flags;
++  uint64_t m_old_asm_isa_flags;
+   bool m_old_general_regs_only;
+ };
+ 
+diff --git a/gcc/config/aarch64/aarch64.cc b/gcc/config/aarch64/aarch64.cc
+index 0f04ab9fba0..c524a2f76ba 100644
+--- a/gcc/config/aarch64/aarch64.cc
++++ b/gcc/config/aarch64/aarch64.cc
+@@ -19555,8 +19555,24 @@ aarch64_load_tp (rtx target)
+       || !register_operand (target, Pmode))
+     target = gen_reg_rtx (Pmode);
+ 
+-  /* Can return in any reg.  */
+-  emit_insn (gen_aarch64_load_tp_hard (target));
++  if (TARGET_HARD_TP)
++    {
++      /* Can return in any reg.  */
++      emit_insn (gen_aarch64_load_tp_hard (target));
++    }
++  else
++    {
++      /* Always returned in r0.  Immediately copy the result into a pseudo,
++	 otherwise other uses of r0 (e.g. setting up function arguments) may
++	 clobber the value.  */
++
++      rtx tmp;
++
++      emit_insn (gen_aarch64_load_tp_soft ());
++
++      tmp = gen_rtx_REG (DImode, R0_REGNUM);
++      emit_move_insn (target, tmp);
++    }
+   return target;
+ }
+ 
+diff --git a/gcc/config/aarch64/aarch64.h b/gcc/config/aarch64/aarch64.h
+index 155cace6afe..93ff5264a2e 100644
+--- a/gcc/config/aarch64/aarch64.h
++++ b/gcc/config/aarch64/aarch64.h
+@@ -1154,6 +1154,10 @@ typedef struct
+ /* Check TLS Descriptors mechanism is selected.  */
+ #define TARGET_TLS_DESC (aarch64_tls_dialect == TLS_DESCRIPTORS)
+ 
++/* Check selected thread pointer access sequence to use.  */
++#define TARGET_HARD_TP (target_thread_pointer == TP_HARD)
++#define TARGET_SOFT_TP (target_thread_pointer == TP_SOFT)
++
+ extern enum aarch64_code_model aarch64_cmodel;
+ 
+ /* When using the tiny addressing model conditional and unconditional branches
+diff --git a/gcc/config/aarch64/aarch64.md b/gcc/config/aarch64/aarch64.md
+index 022eef80bc1..2024af16a17 100644
+--- a/gcc/config/aarch64/aarch64.md
++++ b/gcc/config/aarch64/aarch64.md
+@@ -7068,11 +7068,22 @@
+ (define_insn "aarch64_load_tp_hard"
+   [(set (match_operand:DI 0 "register_operand" "=r")
+ 	(unspec:DI [(const_int 0)] UNSPEC_TLS))]
+-  ""
+-  "mrs\\t%0, tpidr_el0"
++  "TARGET_HARD_TP"
++  "mrs\\t%0, tpidr_el0\\t// aarch64_load_tp_hard"
+   [(set_attr "type" "mrs")]
+ )
+ 
++(define_insn "aarch64_load_tp_soft"
++  [(set (reg:DI 0) (unspec:DI [(const_int 0)] UNSPEC_TLS))
++   (clobber (reg:DI IP0_REGNUM))
++   (clobber (reg:DI IP1_REGNUM))
++   (clobber (reg:DI LR_REGNUM))
++   (clobber (reg:CC CC_REGNUM))]
++  "TARGET_SOFT_TP"
++  "bl\\t__aarch64_read_tp\\t// aarch64_load_tp_soft"
++  [(set_attr "type" "branch")]
++)
++
+ ;; The TLS ABI specifically requires that the compiler does not schedule
+ ;; instructions in the TLS stubs, in order to enable linker relaxation.
+ ;; Therefore we treat the stubs as an atomic sequence.
+diff --git a/gcc/config/aarch64/aarch64.opt b/gcc/config/aarch64/aarch64.opt
+index 1d7967db9c0..17870f18b8b 100644
+--- a/gcc/config/aarch64/aarch64.opt
++++ b/gcc/config/aarch64/aarch64.opt
+@@ -128,6 +128,21 @@ Enum(aarch64_tls_size) String(32) Value(32)
+ EnumValue
+ Enum(aarch64_tls_size) String(48) Value(48)
+ 
++mtp=
++Target RejectNegative Joined Enum(aarch64_tp_type) Var(target_thread_pointer) Init(TP_HARD)
++Specify how to access the thread pointer.
++
++Enum
++Name(aarch64_tp_type) Type(enum aarch64_tp_type)
++Valid arguments to -mtp=:
++
++EnumValue
++Enum(aarch64_tp_type) String(hard) Value(TP_HARD)
++
++EnumValue
++Enum(aarch64_tp_type) String(soft) Value(TP_SOFT)
++
++
+ march=
+ Target RejectNegative Negative(march=) ToLower Joined Var(aarch64_arch_string)
+ Use features of architecture ARCH.
+@@ -266,7 +281,7 @@ TargetVariable
+ long aarch64_stack_protector_guard_offset = 0
+ 
+ moutline-atomics
+-Target Var(aarch64_flag_outline_atomics) Init(2) Save
++Target Var(aarch64_flag_outline_atomics) Save
+ Generate local calls to out-of-line atomic operations.
+ 
+ -param=aarch64-sve-compare-costs=
+diff --git a/gcc/config/aarch64/t-aarch64 b/gcc/config/aarch64/t-aarch64
+index a9a244ab6d6..a29f2772d63 100644
+--- a/gcc/config/aarch64/t-aarch64
++++ b/gcc/config/aarch64/t-aarch64
+@@ -177,8 +177,10 @@ aarch64-cc-fusion.o: $(srcdir)/config/aarch64/aarch64-cc-fusion.cc \
+ 		$(srcdir)/config/aarch64/aarch64-cc-fusion.cc
+ 
+ comma=,
+-MULTILIB_OPTIONS    = $(subst $(comma),/, $(patsubst %, mabi=%, $(subst $(comma),$(comma)mabi=,$(TM_MULTILIB_CONFIG))))
+-MULTILIB_DIRNAMES   = $(subst $(comma), ,$(TM_MULTILIB_CONFIG))
++MULTILIB_OPTIONS    = mcmodel=large fPIC
++MULTILIB_DIRNAMES   = large pic
++MULTILIB_REQUIRED   = mcmodel=large fPIC
++MULTILIB_MATCHES    = fPIC=fpic fPIC=fpie fPIC=fPIE
+ 
+ insn-conditions.md: s-check-sve-md
+ s-check-sve-md: $(srcdir)/config/aarch64/check-sve-md.awk \
+diff --git a/gcc/config/devkitpro.h b/gcc/config/devkitpro.h
+new file mode 100644
+index 00000000000..a25459e4352
+--- /dev/null
++++ b/gcc/config/devkitpro.h
+@@ -0,0 +1,32 @@
++/* Definitions for devkitPro toolchains.
++   Copyright (C) 2016-2018 Free Software Foundation, Inc.
++
++   This file is part of GCC.
++
++   GCC is free software; you can redistribute it and/or modify it
++   under the terms of the GNU General Public License as published
++   by the Free Software Foundation; either version 3, or (at your
++   option) any later version.
++
++   GCC is distributed in the hope that it will be useful, but WITHOUT
++   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
++   License for more details.
++
++   Under Section 7 of GPL version 3, you are granted additional
++   permissions described in the GCC Runtime Library Exception, version
++   3.1, as published by the Free Software Foundation.
++
++   You should have received a copy of the GNU General Public License and
++   a copy of the GCC Runtime Library Exception along with this program;
++   see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++   <http://www.gnu.org/licenses/>.  */
++
++#undef TARGET_OS_CPP_BUILTINS
++#define TARGET_OS_CPP_BUILTINS()                \
++    do {                                        \
++        builtin_define ("__DEVKITA64__");       \
++        builtin_define ("__DEVKITPRO__");       \
++    } while (0)
++
++
+diff --git a/gcc/config/devkitpro.opt b/gcc/config/devkitpro.opt
+new file mode 100644
+index 00000000000..9acbbf9d27c
+--- /dev/null
++++ b/gcc/config/devkitpro.opt
+@@ -0,0 +1,29 @@
++; Options for devkitPro toolchains.
++
++; Copyright (C) 2011-2018 Free Software Foundation, Inc.
++;
++; This file is part of GCC.
++;
++; GCC is free software; you can redistribute it and/or modify it under
++; the terms of the GNU General Public License as published by the Free
++; Software Foundation; either version 3, or (at your option) any later
++; version.
++;
++; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++; WARRANTY; without even the implied warranty of MERCHANTABILITY or
++; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++; for more details.
++;
++; You should have received a copy of the GNU General Public License
++; along with GCC; see the file COPYING3.  If not see
++; <http://www.gnu.org/licenses/>.
++
++; See the GCC internals manual (options.texi) for a description of
++; this file's format.
++
++; Please try to keep this file in ASCII collating order.
++
++pthread
++Driver
++
++; This comment is to ensure we retain the blank line above.
+diff --git a/gcc/config/i386/host-mingw32.cc b/gcc/config/i386/host-mingw32.cc
+index acff6138d63..8dc91b75f93 100644
+--- a/gcc/config/i386/host-mingw32.cc
++++ b/gcc/config/i386/host-mingw32.cc
+@@ -93,7 +93,10 @@ mingw32_gt_pch_get_address (size_t size, int)
+      for NT system dlls is in 0x70000000 to 0x78000000 range.
+      If we allocate at bottom we need to reserve the address as early
+      as possible and at the same point in each invocation. */
+- 
++
++#if __MINGW64__
++  size  = UINT64_C(64 * 1024 * 1024 * 1024);
++#endif
+   res = VirtualAlloc (NULL, size,
+ 		      MEM_RESERVE | MEM_TOP_DOWN,
+ 		      PAGE_NOACCESS);
+diff --git a/gcc/gcc.cc b/gcc/gcc.cc
+index 16bb07f2cdc..22a181a3a1c 100644
+--- a/gcc/gcc.cc
++++ b/gcc/gcc.cc
+@@ -868,6 +868,11 @@ proper position among the other output files.  */
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1191,6 +1196,7 @@ static const char *link_spec = LINK_SPEC;
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1701,6 +1707,7 @@ static struct spec_list static_specs[] =
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index 93ff5b81dc5..20c0fe89a28 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -326,7 +326,7 @@ register_tm_clones (void)
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance
+diff --git a/libgcc/gthr.h b/libgcc/gthr.h
+index 1989c0c86ed..f1c49b2d4b1 100644
+--- a/libgcc/gthr.h
++++ b/libgcc/gthr.h
+@@ -136,7 +136,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ /* The pe-coff weak support isn't fully compatible to ELF's weak.
+    For static libraries it might would work, but as we need to deal
+    with shared versions too, we disable it for mingw-targets.  */
+-#ifdef __MINGW32__
++#if defined(__MINGW32__) || defined(__DEVKITA64__)
+ #undef GTHREAD_USE_WEAK
+ #define GTHREAD_USE_WEAK 0
+ #endif
+diff --git a/libstdc++-v3/include/Makefile.am b/libstdc++-v3/include/Makefile.am
+index a880e8ee227..c58249f986c 100644
+--- a/libstdc++-v3/include/Makefile.am
++++ b/libstdc++-v3/include/Makefile.am
+@@ -1417,6 +1417,7 @@ ${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITA64_GLIBCXX___/__DEVKITA64__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 
+diff --git a/libstdc++-v3/include/Makefile.in b/libstdc++-v3/include/Makefile.in
+index 0ff875b280b..37820c57a0a 100644
+--- a/libstdc++-v3/include/Makefile.in
++++ b/libstdc++-v3/include/Makefile.in
+@@ -1891,6 +1891,7 @@ ${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITA64_GLIBCXX___/__DEVKITA64__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 

dka64/rules/base_rules

@@ -0,0 +1,40 @@
+include $(DEVKITPRO)/devkitA64/base_tools
+
+#---------------------------------------------------------------------------------
+%.a:
+#---------------------------------------------------------------------------------
+	@echo $(notdir $@)
+	@rm -f $@
+	$(AR) -rc $@ $^
+
+
+#---------------------------------------------------------------------------------
+%.o: %.cpp
+	@echo $(notdir $<)
+	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.c
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.s
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.S
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+# canned command sequence for binary data
+#---------------------------------------------------------------------------------
+define bin2o
+	bin2s $< | $(AS) -o $(@)
+	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' -e 's/[^A-Za-z0-9_]/_/g')`"_end[];" > `(echo $(<F) | tr . _)`.h
+	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' -e 's/[^A-Za-z0-9_]/_/g')`"[];" >> `(echo $(<F) | tr . _)`.h
+	echo "extern const u32" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' -e 's/[^A-Za-z0-9_]/_/g')`_size";" >> `(echo $(<F) | tr . _)`.h
+endef
+

dka64/rules/base_tools

@@ -7,15 +7,23 @@ UNAME_R	:=	$(shell uname -r)
 ifneq (,$(findstring Darwin,$(UNAME_S)))
 	export SHELL=/bin/bash
 endif
+
 #---------------------------------------------------------------------------------
 # path to tools
 #---------------------------------------------------------------------------------
-export PATH	:=	$(DEVKITARM)/bin:$(PATH)
+DEVKITPATH=$(shell echo "$(DEVKITPRO)" | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+export PATH	:=	$(DEVKITPATH)/tools/bin:$(DEVKITPATH)/devkitA64/bin:$(PATH)
+
+#---------------------------------------------------------------------------------
+# add portlibs path
+#---------------------------------------------------------------------------------
+export PORTLIBS_PATH	:=	$(DEVKITPATH)/portlibs
+
 
 #---------------------------------------------------------------------------------
 # the prefix on the compiler executables
 #---------------------------------------------------------------------------------
-PREFIX		:=	arm-none-eabi-
+PREFIX		:=	aarch64-none-elf-
 
 export CC	:=	$(PREFIX)gcc
 export CXX	:=	$(PREFIX)g++

dka64/scripts/build-crtls.sh

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+#---------------------------------------------------------------------------------
+# set env variables
+#---------------------------------------------------------------------------------
+export DEVKITPRO=$TOOLPATH
+
+#---------------------------------------------------------------------------------
+# Install the rules files
+#---------------------------------------------------------------------------------
+cd $BUILDDIR
+
+tar -xvf $SRCDIR/devkita64-rules-$DKA64_RULES_VER.tar.gz
+cd devkita64-rules-$DKA64_RULES_VER
+make install

dka64/scripts/build-gcc.sh

@@ -0,0 +1,149 @@
+#!/bin/sh
+#---------------------------------------------------------------------------------
+
+#---------------------------------------------------------------------------------
+# build and install binutils
+#---------------------------------------------------------------------------------
+
+mkdir -p $target/binutils
+cd $target/binutils
+
+if [ ! -f configured-binutils ]
+then
+	../../binutils-$BINUTILS_VER/configure \
+        --prefix=$prefix --target=$target --disable-nls --disable-werror \
+	--enable-lto --enable-plugins --enable-poison-system-directories \
+	$CROSS_PARAMS \
+        || { echo "Error configuring binutils"; exit 1; }
+	touch configured-binutils
+fi
+
+if [ ! -f built-binutils ]
+then
+  $MAKE || { echo "Error building binutils"; exit 1; }
+  touch built-binutils
+fi
+
+if [ ! -f installed-binutils ]
+then
+  $MAKE install || { echo "Error installing binutils"; exit 1; }
+  touch installed-binutils
+fi
+cd $BUILDDIR
+
+#---------------------------------------------------------------------------------
+# build and install just the c compiler
+#---------------------------------------------------------------------------------
+mkdir -p $target/gcc
+cd $target/gcc
+
+if [ ! -f configured-gcc ]
+then
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	LDFLAGS_FOR_TARGET="" \
+	../../gcc-$GCC_VER/configure \
+		--enable-languages=c,c++,objc,lto \
+		--with-gnu-as --with-gnu-ld --with-gcc \
+		--with-march=armv8\
+		--enable-cxx-flags='-ffunction-sections' \
+		--disable-libstdcxx-verbose \
+		--enable-poison-system-directories \
+		--enable-multilib \
+		--enable-threads --disable-win32-registry --disable-nls --disable-debug\
+		--disable-libmudflap --disable-libssp --disable-libgomp \
+		--disable-libstdcxx-pch \
+		--enable-libstdcxx-time \
+		--enable-libstdcxx-filesystem-ts \
+		--target=$target \
+		--with-newlib=yes \
+		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
+		--prefix=$prefix \
+		--enable-lto \
+		--disable-tm-clone-registry \
+		--disable-__cxa_atexit \
+		--with-bugurl="https://github.com/devkitPro/buildscripts/issues" --with-pkgversion="devkitA64 release 22" \
+		$CROSS_PARAMS \
+		$CROSS_GCC_PARAMS \
+		$EXTRA_GCC_PARAMS \
+		|| { echo "Error configuring gcc"; exit 1; }
+	touch configured-gcc
+fi
+
+if [ ! -f built-gcc ]
+then
+	$MAKE all-gcc || { echo "Error building gcc stage1"; exit 1; }
+	touch built-gcc
+fi
+
+if [ ! -f installed-gcc ]
+then
+	$MAKE install-gcc || { echo "Error installing gcc"; exit 1; }
+	touch installed-gcc
+fi
+
+
+unset CFLAGS
+cd $BUILDDIR
+
+OLD_CC=$CC
+OLDCXX=$CXX
+unset CC
+unset CXX
+
+#---------------------------------------------------------------------------------
+# build and install newlib
+#---------------------------------------------------------------------------------
+mkdir -p $target/newlib
+cd $target/newlib
+
+if [ ! -f configured-newlib ]
+then
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	../../newlib-$NEWLIB_VER/configure \
+	--disable-newlib-supplied-syscalls \
+	--enable-newlib-mb \
+	--disable-newlib-wide-orient \
+	--target=$target \
+	--prefix=$prefix \
+	|| { echo "Error configuring newlib"; exit 1; }
+	touch configured-newlib
+fi
+
+if [ ! -f built-newlib ]
+then
+	$MAKE || { echo "Error building newlib"; exit 1; }
+	touch built-newlib
+fi
+
+
+if [ ! -f installed-newlib ]
+then
+	$MAKE install -j1 || { echo "Error installing newlib"; exit 1; }
+	touch installed-newlib
+fi
+
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
+#---------------------------------------------------------------------------------
+# build and install the final compiler
+#---------------------------------------------------------------------------------
+
+cd $BUILDDIR
+
+cd $target/gcc
+
+if [ ! -f built-stage2 ]
+then
+	$MAKE all || { echo "Error building gcc stage2"; exit 1; }
+	touch built-stage2
+fi
+
+if [ ! -f installed-stage2 ]
+then
+	$MAKE install || { echo "Error installing gcc stage2"; exit 1; }
+	touch installed-stage2
+fi
+
+rm -fr $prefix/$target/sys-include

dkarm-eabi/crtls/3dsx.ld

@@ -1,190 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-PHDRS
-{
-	code   PT_LOAD FLAGS(5) /* Read | Execute */;
-	rodata PT_LOAD FLAGS(4) /* Read */;
-	data   PT_LOAD FLAGS(6) /* Read | Write */;
-}
-
-SECTIONS
-{
-	/* =========== CODE section =========== */
-
-	PROVIDE(__start__ = 0x100000);
-	. = __start__;
-
-	.text ALIGN(0x1000) :
-	{
-		/* .init */
-		KEEP( *(.crt0) )
-		KEEP( *(.init) )
-		. = ALIGN(4);
-
-		/* .text */
-		*(.text)
-		*(.text.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.stub)
-		*(.gnu.warning)
-		*(.gnu.linkonce.t*)
-		. = ALIGN(4);
-
-		/* .fini */
-		KEEP( *(.fini) )
-		. = ALIGN(4);
-	} : code
-
-	/* =========== RODATA section =========== */
-
-	. = ALIGN(0x1000);
-
-	.rodata :
-	{
-		*(.rodata)
-		*(.roda)
-		*(.rodata.*)
-		*all.rodata*(*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);
-	} : rodata
-
-	.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } : rodata
-	__exidx_start = .;
-	ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } : rodata
-	__exidx_end = .;
-
-	/* =========== DATA section =========== */
-
-	. = ALIGN(0x1000);
-
-	.data :
-	{
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-	} : data
-
-	.tdata ALIGN(4) :
-	{
-		__tdata_lma = .;
-		*(.tdata)
-		*(.tdata.*)
-		*(.gnu.linkonce.td.*)
-		. = ALIGN(4);
-		__tdata_lma_end = .;
-	} : data
-
-	.tbss ALIGN(4) :
-	{
-		*(.tbss)
-		*(.tbss.*)
-		*(.gnu.linkonce.tb.*)
-		*(.tcommon)
-		. = ALIGN(4);
-	} : data
-
-	.preinit_array ALIGN(4) :
-	{
-		PROVIDE (__preinit_array_start = .);
-		KEEP (*(.preinit_array))
-		PROVIDE (__preinit_array_end = .);
-	} : data
-
-	.init_array ALIGN(4) :
-	{
-		PROVIDE (__init_array_start = .);
-		KEEP (*(SORT(.init_array.*)))
-		KEEP (*(.init_array))
-		PROVIDE (__init_array_end = .);
-	} : data
-
-	.fini_array ALIGN(4) :
-	{
-		PROVIDE (__fini_array_start = .);
-		KEEP (*(.fini_array))
-		KEEP (*(SORT(.fini_array.*)))
-		PROVIDE (__fini_array_end = .);
-	} : data
-
-	.ctors ALIGN(4) :
-	{
-		KEEP (*crtbegin.o(.ctors)) /* MUST be first -- GCC requires it */
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-	} : data
-
-	.dtors ALIGN(4) :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-	} : data
-
-	__bss_start__ = .;
-	.bss ALIGN(4) :
-	{
-		*(.dynbss)
-		*(.bss)
-		*(.bss.*)
-		*(.gnu.linkonce.b*)
-		*(COMMON)
-		. = ALIGN(4);
-
-		/* Reserve space for the TLS segment of the main thread */
-		__tls_start = .;
-		. += + SIZEOF(.tdata) + SIZEOF(.tbss);
-		__tls_end = .;
-	} : data
-	__bss_end__ = .;
-
-	__end__ = ABSOLUTE(.) ;
-
-	/* ==================
-	   ==== Metadata ====
-	   ================== */
-
-	/* Discard sections that difficult post-processing */
-	/DISCARD/ : { *(.group .comment .note) }
-
-	/* Stabs debugging sections. */
-	.stab          0 : { *(.stab) }
-	.stabstr       0 : { *(.stabstr) }
-	.stab.excl     0 : { *(.stab.excl) }
-	.stab.exclstr  0 : { *(.stab.exclstr) }
-	.stab.index    0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-
-	/* DWARF debug sections.
-	   Symbols in the DWARF debugging sections are relative to the beginning
-	   of the section so we begin them at 0. */
-
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-}

dkarm-eabi/crtls/3dsx.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T 3dsx.ld%s -d --emit-relocs --use-blx --gc-sections
-
-*startfile:
-3dsx_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/3dsx_crt0.s

@@ -1,73 +0,0 @@
-@---------------------------------------------------------------------------------
-@ 3DS processor selection
-@---------------------------------------------------------------------------------
-	.cpu mpcore
-@---------------------------------------------------------------------------------
-
-@---------------------------------------------------------------------------------
-	.section ".crt0","ax"
-	.global _start, __service_ptr, __apt_appid, __heap_size, __linear_heap_size, __system_arglist, __system_runflags
-@---------------------------------------------------------------------------------
-	.align 2
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b startup
-	.ascii "_prm"
-__service_ptr:
-	.word 0 @ Pointer to service handle override list -- if non-NULL it is assumed that we have been launched from a homebrew launcher
-__apt_appid:
-	.word 0x300 @ Program APPID
-__heap_size:
-	.word 24*1024*1024 @ Default heap size (24 MiB)
-__linear_heap_size:
-	.word 32*1024*1024 @ Default linear heap size (32 MiB)
-__system_arglist:
-	.word 0 @ Pointer to argument list (argc (u32) followed by that many NULL terminated strings)
-__system_runflags:
-	.word 0 @ Flags to signal runtime restrictions to ctrulib
-startup:
-	@ Save return address
-	mov r4, lr
-
-	@ Clear the BSS section
-	ldr r0, =__bss_start__
-	ldr r1, =__bss_end__
-	sub r1, r1, r0
-	bl  ClearMem
-
-	@ System initialization
-	mov r0, r4
-	bl initSystem
-
-	@ Set up argc/argv arguments for main()
-	ldr r0, =__system_argc
-	ldr r1, =__system_argv
-	ldr r0, [r0]
-	ldr r1, [r1]
-
-	@ Jump to user code
-	ldr r3, =main
-	ldr lr, =__ctru_exit
-	bx  r3
-
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-@---------------------------------------------------------------------------------
-	mov  r2, #3     @ Round down to nearest word boundary
-	add  r1, r1, r2 @ Shouldn't be needed
-	bics r1, r1, r2	@ Clear 2 LSB (and set Z)
-	bxeq lr         @ Quit if copy size is 0
-
-	mov	r2, #0
-ClrLoop:
-	stmia r0!, {r2}
-	subs  r1, r1, #4
-	bne   ClrLoop
-
-	bx lr

dkarm-eabi/crtls/Makefile

@@ -1,13 +0,0 @@
-include $(DEVKITARM)/base_rules
-
-all:
-	$(CC)  -x assembler-with-cpp -marm -c $(CRT)_crt0.s -o$(CRT)_crt0.o
-	$(CC)  -x assembler-with-cpp -mthumb -c $(CRT)_crt0.s -o thumb/$(CRT)_crt0.o
-
-ds_arm7_vram_crt0:
-	$(CC)  -x assembler-with-cpp -marm -c -DVRAM ds_arm7_crt0.s -ods_arm7_vram_crt0.o
-	$(CC)  -x assembler-with-cpp -mthumb -c -DVRAM ds_arm7_crt0.s -othumb/ds_arm7_vram_crt0.o
-
-3dsx_crt0:
-	$(CC) -march=armv6k -mfloat-abi=hard -c 3dsx_crt0.s -o armv6k/fpu/3dsx_crt0.o
-

dkarm-eabi/crtls/dldi.ld

@@ -1,190 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-	/*	This base address is chosen to be a reserved instruction in THUMB mode,
-		and SWILT in ARM mode, with an impossible SWI value. This should allow
-		the patcher / linker to find all shifted addresses within each section.
-		Changed sections are: glue_7, got
-	*/
-	ddmem	: ORIGIN = 0xBF800000, LENGTH = 16K		
-}
-
-
-SECTIONS
-{
-	.crt0	:
-	{
-		__text_start = . ;
-		KEEP (*(.crt0))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.text :   /* ALIGN (4): */
-	{
-		*(.text.*)
-		*(.stub)
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.gnu.linkonce.t*)
-		__glue_start = ABSOLUTE(.);
-		*(.glue_7)
-		*(.glue_7t)
-		__glue_end = ABSOLUTE(.);
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ddmem
-	__exidx_start = .;
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ddmem
-	__exidx_end = .;
-
-/* Ensure the __preinit_array_start label is properly aligned.  We
-   could instead move the label definition inside the section, but
-   the linker would then create the section even if it turns out to
-   be empty, which isn't pretty.  */
-	. = ALIGN(32 / 8);
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >ddmem = 0xff
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     : { KEEP (*(.init_array)) } >ddmem = 0xff
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     : { KEEP (*(.fini_array)) } >ddmem = 0xff
-	PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ddmem = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >ddmem = 0
-
-
-	__got_start = . ;
-	.got            : 
-	{ 
-		*(.got.plt) 
-		*(.got) 
-		*(.rel.got)
-	} >ddmem = 0
-	__got_end = . ;
-
-	
-	.data ALIGN(4) : 	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >ddmem = 0xff
-
-	__data_end = . ;
-
-	.bss ALIGN(4) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-	} >ddmem
-
-	__bss_end = . ;
-	__bss_end__ = . ;
-
-	_end = . ;
-	__end__ = . ;
-	PROVIDE (end = _end);
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm7.ld

@@ -1,225 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-
-PHDRS {
-	crt0  PT_LOAD FLAGS(7);
-	arm7  PT_LOAD FLAGS(7);
-	arm7i PT_LOAD FLAGS(0x100007);
-}
-
-
-MEMORY {
-	ewram  : ORIGIN = 0x02380000, LENGTH = 12M - 512K
-	rom    : ORIGIN = 0x08000000, LENGTH = 32M
-	iwram  : ORIGIN = 0x037f8000, LENGTH = 96K
-
-	twl_ewram : ORIGIN = 0x02e80000, LENGTH = 512K - 64K
-	twl_iwram : ORIGIN = 0x03000000, LENGTH = 256K
-}
-
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram)+ LENGTH(iwram);
-
-__sp_irq	=	__iwram_top - 0x100;
-__sp_svc	=	__sp_irq - 0x100;
-__sp_usr	=	__sp_svc - 0x100;
-
-__irq_flags	=	0x04000000 - 8;
-__irq_flagsaux	=	0x04000000 - 0x40;
-__irq_vector	=	0x04000000 - 4;
-
-SECTIONS
-{
-
-	.twl :
-	{
-		__arm7i_lma__ = LOADADDR(.twl);
-		__arm7i_start__ = .;
-		*(.twl)
-		*.twl*(.text .stub .text.* .gnu.linkonce.t.*)
-		*.twl*(.rodata)
-		*.twl*(.roda)
-		*.twl*(.rodata.*)
-		*.twl*(.data)
-		*.twl*(.data.*)
-		*.twl*(.gnu.linkonce.d*)
-		__arm7i_end__ = .;
-	} >twl_iwram AT>twl_ewram :arm7i
-
-	.twl_bss ALIGN(4) (NOLOAD) :
-	{
-		__twl_bss_start__ = .;
-		*(.twl_bss)
-		*.twl.*(.dynbss)
-		*.twl.*(.gnu.linkonce.b*)
-		*.twl.*(.bss*)
-		*.twl.*(COMMON)
-		__twl_bss_end__ = .;
-	} >twl_iwram :NONE
-
-	.crt0	:
-	{
-		KEEP (*(.crt0))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram :crt0
-
-	.text :
-	{
-		__arm7_lma__ = LOADADDR(.text);
-		__arm7_start__ = .;
-		KEEP (*(SORT_NONE(.init)))
-		*(.plt)
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >iwram AT>ewram :arm7
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >iwram AT>ewram
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram AT>ewram
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >iwram AT>ewram
-
-	.ARM.exidx   : {
-		__exidx_start = .;
-		*(.ARM.exidx* .gnu.linkonce.armexidx.*)
-		__exidx_end = .;
-	 } >iwram AT>ewram
-
-/* Ensure the __preinit_array_start label is properly aligned.  We
-   could instead move the label definition inside the section, but
-   the linker would then create the section even if it turns out to
-   be empty, which isn't pretty.  */
-	.preinit_array     : {
-		. = ALIGN(32 / 8);
-		PROVIDE (__preinit_array_start = .);
-		KEEP (*(.preinit_array))
-		PROVIDE (__preinit_array_end = .);
-	} >iwram AT>ewram
-
-	.init_array     : {
-		PROVIDE (__init_array_start = .);
-		KEEP (*(.init_array))
-		PROVIDE (__init_array_end = .);
-	} >iwram AT>ewram
-
-	.fini_array     : {
-		PROVIDE (__fini_array_start = .);
-		KEEP (*(.fini_array))
-		PROVIDE (__fini_array_end = .);
-	} >iwram AT>ewram
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram AT>ewram
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram AT>ewram
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram AT>ewram
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram AT>ewram
-	.jcr            : { KEEP (*(.jcr)) } >iwram AT>ewram
-	.got            : { *(.got.plt) *(.got) } >iwram AT>ewram
-
-	.data ALIGN(4) : 	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >iwram AT>ewram
-
-	.bss ALIGN(4) (NOLOAD) :
-	{
-		__arm7_end__ = .;
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	} >iwram
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm7.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm7.ld%s --gc-sections
-
-*startfile:
-ds_arm7_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_arm7_crt0.s

@@ -1,179 +0,0 @@
-@---------------------------------------------------------------------------------
-	.section ".crt0","ax"
-	.global _start
-@---------------------------------------------------------------------------------
-	.align	4
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	mov	r0, #0x04000000		@ IME = 0;
-	mov	r1, #0
-	str	r1, [r0, #0x208]
-
-	mov	r0, #0x12		@ Switch to IRQ Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_irq		@ Set IRQ stack
-
-	mov	r0, #0x13		@ Switch to SVC Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_svc		@ Set SVC stack
-
-	mov	r0, #0x1F		@ Switch to System Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_usr		@ Set user stack
-
-#ifndef VRAM
-	adr	r1, __sync_start	@ Perform ARM7<->ARM9 sync code
-	ldr	r2, =__arm7_start__
-	mov	r3, #(__sync_end-__sync_start)
-	mov	r8, r2
-	bl	CopyMem
-	mov	r3, r8
-	bl	_blx_r3_stub
-
-@---------------------------------------------------------------------------------
-@ Copy arm7 binary from LMA to VMA (EWRAM to IWRAM)
-@---------------------------------------------------------------------------------
-	adr	r0, arm7lma		@ Calculate ARM7 LMA
-	ldr	r1, [r0]
-	add	r1, r1, r0
-	ldr	r2, =__arm7_start__
-	ldr	r4, =__arm7_end__
-	bl	CopyMemCheck
-
-#else
-	bl	__sync_start
-#endif
-
-	ldr	r0, =__bss_start__	@ Clear BSS section to 0x00
-	ldr	r1, =__bss_end__
-	sub	r1, r1, r0
-	bl	ClearMem
-
-#ifndef VRAM
-	cmp	r10, #1
-	bne	NotTWL
-	ldr	r1, =__dsimode		@ set DSi mode flag
-	strb	r10, [r1]
-
-	ldr	r1, =0x02ffe1d8		@ Get ARM7i LMA from header
-	ldr	r1, [r1]
-	ldr	r2, =__arm7i_start__
-	ldr	r4, =__arm7i_end__
-	bl	CopyMemCheck
-
-	ldr	r0, =__twl_bss_start__	@ Clear TWL BSS section to 0x00
-	ldr	r1, =__twl_bss_end__
-	sub	r1, r1, r0
-	bl	ClearMem
-#endif
-
-NotTWL:
-	ldr	r3, =__libc_init_array	@ global constructors
-	bl	_blx_r3_stub
-
-	mov	r0, #0			@ int argc
-	mov	r1, #0			@ char *argv[]
-	ldr	r3, =main
-	ldr	lr,=__libnds_exit
-	mov	r12, #0x4000000		@ tell arm9 we are ready
-	mov	r9, #0
-	str	r9, [r12, #0x180]
-_blx_r3_stub:
-	bx	r3
-
-#ifndef VRAM
-arm7lma:
-	.word	__arm7_lma__ - .
-#endif
-	.pool
-
-@---------------------------------------------------------------------------------
-@ ARM7<->ARM9 synchronization code
-@---------------------------------------------------------------------------------
-
-__sync_start:
-	push	{lr}
-	mov	r12, #0x4000000
-	mov	r9, #0x0
-	bl	IPCSync
-	mov	r9, #(0x9<<8)
-	str	r9, [r12, #0x180]
-	mov	r9, #0xA
-	bl	IPCSync
-	mov	r9, #(0xB<<8)
-	str	r9, [r12, #0x180]
-	mov	r9, #0xC
-	bl	IPCSync
-	mov	r9, #(0xD<<8)
-	str	r9, [r12, #0x180]
-IPCRecvFlag:
-	ldr	r10, [r12, #0x180]
-	and	r10, r10, #0xF
-	cmp	r10, #0xC
-	beq	IPCRecvFlag
-	pop	{pc}
-IPCSync:
-	ldr	r10, [r12, #0x180]
-	and	r10, r10, #0xF
-	cmp	r10, r9
-	bne	IPCSync
-	bx	lr
-__sync_end:
-
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-@---------------------------------------------------------------------------------
-	mov	r2, #3			@ Round down to nearest word boundary
-	add	r1, r1, r2		@ Shouldn't be needed
-	bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
-	bxeq	lr			@ Quit if copy size is 0
-
-	mov	r2, #0
-ClrLoop:
-	stmia	r0!, {r2}
-	subs	r1, r1, #4
-	bne	ClrLoop
-	bx	lr
-
-@---------------------------------------------------------------------------------
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@---------------------------------------------------------------------------------
-CopyMemCheck:
-@---------------------------------------------------------------------------------
-	cmp	r1, r2
-	bxeq	lr
-
-	sub	r3, r4, r2		@ Is there any data to copy?
-@---------------------------------------------------------------------------------
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@---------------------------------------------------------------------------------
-CopyMem:
-@---------------------------------------------------------------------------------
-	mov	r0, #3			@ These commands are used in cases where
-	add	r3, r3, r0		@ the length is not a multiple of 4,
-	bics	r3, r3, r0		@ even though it should be.
-	bxeq	lr			@ Length is zero, so exit
-CIDLoop:
-	ldmia	r1!, {r0}
-	stmia	r2!, {r0}
-	subs	r3, r3, #4
-	bne	CIDLoop
-	bx	lr
-
-@---------------------------------------------------------------------------------
-	.align
-	.pool
-	.end
-@---------------------------------------------------------------------------------

dkarm-eabi/crtls/ds_arm7_iwram.ld

@@ -1,187 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x037f8000, LENGTH = 96K	
-}
-
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram)+ LENGTH(iwram);
-
-__sp_irq	=	__iwram_top - 0x100;
-__sp_svc	=	__sp_irq - 0x100;
-__sp_usr	=	__sp_svc - 0x100;
-
-__irq_flags	=	0x04000000 - 8;
-__irq_flagsaux	=	0x04000000 - 0x40;
-__irq_vector	=	0x04000000 - 4;
-
-SECTIONS
-{
-	.crt0	:
-	{
-		__text_start = . ;
-		KEEP (*(.crt0))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.init           :
-	{
-		KEEP (*(SORT_NONE(.init)))
-	} >iwram = 0xff
-
-	.plt : { *(.plt) } >iwram = 0xff
-
-	.text :   /* ALIGN (4): */
-	{
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >iwram =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >iwram
-	__exidx_start = .;
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >iwram
-	__exidx_end = .;
-
-/* Ensure the __preinit_array_start label is properly aligned.  We
-   could instead move the label definition inside the section, but
-   the linker would then create the section even if it turns out to
-   be empty, which isn't pretty.  */
-	. = ALIGN(32 / 8);
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >iwram = 0xff
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     : { KEEP (*(.init_array)) } >iwram = 0xff
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     : { KEEP (*(.fini_array)) } >iwram = 0xff
-	PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >iwram = 0
-	.got            : { *(.got.plt) *(.got) } >iwram = 0
-
-
-	.data ALIGN(4) : 	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >iwram = 0xff
-
-
-	__arm7_end__ = .;
-
-
-	.bss ALIGN(4) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	} >iwram
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm7_iwram.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm7_iwram.ld%s
-
-*startfile:
-ds_arm7_vram_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_arm7_vram.ld

@@ -1,190 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x037f8000, LENGTH = 96K	
-	vram	: ORIGIN = 0x06000000, LENGTH = 256K
-}
-
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram)+ LENGTH(iwram);
-
-__sp_irq	=	__iwram_top - 0x100;
-__sp_svc	=	__sp_irq - 0x100;
-__sp_usr	=	__sp_svc - 0x100;
-
-__irq_flags	=	0x04000000 - 8;
-__irq_flagsaux	=	0x04000000 - 0x40;
-__irq_vector	=	0x04000000 - 4;
-
-SECTIONS
-{
-	.crt0	:
-	{
-		__text_start = . ;
-		KEEP (*(.crt0))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	__arm7_lma__ = .;
-	__arm7_start__ = .;
-	.init           :
-	{
-		KEEP (*(SORT_NONE(.init)))
-	} >vram = 0xff
-
-	.plt : { *(.plt) } >vram = 0xff
-
-	.text :   /* ALIGN (4): */
-	{
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >vram =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >vram
-	__exidx_start = .;
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >vram
-	__exidx_end = .;
-
-/* Ensure the __preinit_array_start label is properly aligned.  We
-   could instead move the label definition inside the section, but
-   the linker would then create the section even if it turns out to
-   be empty, which isn't pretty.  */
-	. = ALIGN(32 / 8);
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >vram = 0xff
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     : { KEEP (*(.init_array)) } >vram = 0xff
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     : { KEEP (*(.fini_array)) } >vram = 0xff
-	PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >vram = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >vram = 0
-	.got            : { *(.got.plt) *(.got) } >vram = 0
-
-
-	.data ALIGN(4) : 	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >vram = 0xff
-
-
-	__arm7_end__ = .;
-
-
-	.bss ALIGN(4) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	} >vram
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm7_vram.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm7_vram.ld%s
-
-*startfile:
-ds_arm7_vram_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_arm9.ld

@@ -1,280 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-__ewram_end	=	ORIGIN(ewram) + LENGTH(ewram);
-__eheap_end	=	ORIGIN(ewram) + LENGTH(ewram);
-
-__dtcm_top	=	ORIGIN(dtcm) + LENGTH(dtcm);
-__irq_flags	=	__dtcm_top - 0x08;
-__irq_vector	=	__dtcm_top - 0x04;
-
-__sp_svc	=	__dtcm_top - 0x100;
-__sp_irq	=	__sp_svc - 0x100;
-__sp_usr	=	__sp_irq - 0x100;
-
-PHDRS {
-	main    PT_LOAD FLAGS(7);
-	dtcm    PT_LOAD FLAGS(7);
-	itcm    PT_LOAD FLAGS(7);
-	vectors PT_LOAD FLAGS(7);
-	twl     PT_LOAD FLAGS(0x100007);
-}
-
-SECTIONS
-{
-	/* Secure area crap */
-	.secure : { *(.secure) } >ewram :main = 0
-
-	.crt0	:
-	{
-		__text_start = . ;
-		KEEP (*(.crt0))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram :main = 0x00
-
-	.plt : { *(.plt) } >ewram :main = 0xff
-
-	.init :
-	{
-		KEEP (*(SORT_NONE(.init)))
-	} >ewram :main
-
-	.text :   /* ALIGN (4): */
-	{
-		*(EXCLUDE_FILE(*.itcm* *.vectors* *.twl*) .text)
-		*(EXCLUDE_FILE(*.itcm* *.vectors* *.twl*) .stub)
-		*(EXCLUDE_FILE(*.itcm* *.vectors* *.twl*) .text.*)
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(EXCLUDE_FILE(*.twl*) .gnu.warning)
-		*(EXCLUDE_FILE(*.twl*) .gnu.linkonce.t*)
-		*(.glue_7)
-		*(.glue_7t)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram :main = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >ewram :main =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(EXCLUDE_FILE(*.twl*) .rodata)
-		*all.rodata*(*)
-		*(EXCLUDE_FILE(*.twl*) .roda)
-		*(EXCLUDE_FILE(*.twl*) .rodata.*)
-		*(EXCLUDE_FILE(*.twl*) .gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram :main = 0xff
-
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ewram :main
- 	__exidx_start = .;
-	ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ewram :main
- 	__exidx_end = .;
-
-	/*	Ensure the __preinit_array_start label is properly aligned.  We
-		could instead move the label definition inside the section, but
-		the linker would then create the section even if it turns out to
-		be empty, which isn't pretty.  */
-
-	. = ALIGN(32 / 8);
-
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >ewram :main = 0xff
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     :
-	{
-		KEEP (*(SORT(.init_array.*)))
-		KEEP (*(.init_array))
-	} >ewram :main = 0xff
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     :
-	{
-		KEEP (*(.fini_array))
-		KEEP (*(SORT(.fini_array.*)))
-	} >ewram :main = 0xff
-
-	PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/*	gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram :main = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram :main = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram :main = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram :main = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >ewram :main = 0
-	.got            : { *(.got.plt) *(.got) *(.rel.got) } >ewram :main = 0
-
-	.ewram ALIGN(4) : 
-	{
-		__ewram_start = ABSOLUTE(.) ;
-		*(.ewram)
-		*ewram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram :main = 0xff
-
-
-	.data ALIGN(4) :
-	{
-		__data_start = ABSOLUTE(.);
-		*(EXCLUDE_FILE(*.twl*) .data)
-		*(EXCLUDE_FILE(*.twl*) .data.*)
-		*(EXCLUDE_FILE(*.twl*) .gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-		__data_end = ABSOLUTE(.) ;
-	} >ewram :main = 0xff
-
-	__bss_vma = . ;
-
-	.dtcm :
-	{
-		__dtcm_lma = LOADADDR(.dtcm);
-		__dtcm_start = ABSOLUTE(.);
-		*(.dtcm)
-		*(.dtcm.*)
-		. = ALIGN(4);
-		__dtcm_end = ABSOLUTE(.);
-	} >dtcm AT>ewram :dtcm = 0xff
-
-	.itcm :
-	{
-		__itcm_lma = LOADADDR(.itcm);
-		__itcm_start = ABSOLUTE(.);
-		*(.itcm)
-		*.itcm*(.text .stub .text.*)
-		. = ALIGN(4);
-		__itcm_end = ABSOLUTE(.);
-	} >itcm AT>ewram :itcm = 0xff
-
-	.vectors :
-	{
-		__vectors_lma = LOADADDR(.vectors);
-		__vectors_start = ABSOLUTE(.);
-		*(.vectors)
-		*.vectors*(.text .stub .text.*)
-		. = ALIGN(4);
-		__vectors_end = ABSOLUTE(.);
-	} >vectors AT>ewram :vectors = 0xff
-	
-	.sbss __dtcm_end (NOLOAD): 
-	{
-		__sbss_start = ABSOLUTE(.);
-		__sbss_start__ = ABSOLUTE(.);
-		*(.sbss)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__sbss_end = ABSOLUTE(.);
-	} >dtcm :NONE
-
-	.bss __bss_vma (NOLOAD): 
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(EXCLUDE_FILE(*.twl*) .dynbss)
-		*(EXCLUDE_FILE(*.twl*) .gnu.linkonce.b*)
-		*(EXCLUDE_FILE(*.twl*) .bss*)
-		*(EXCLUDE_FILE(*.twl*) COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.) ;
-		__end__ = ABSOLUTE(.) ;
-	} >ewram :NONE
-
-	.twl __end__ : AT(MAX(0x2400000,MAX(__end__,LOADADDR(.vectors)+SIZEOF(.vectors))))
-	{
-		__arm9i_lma__ = LOADADDR(.twl);
-		__arm9i_start__ = ABSOLUTE(.);
-		*(.twl)
-		*.twl*(.text .stub .text.* .gnu.linkonce.t.*)
-		*.twl*(.rodata)
-		*.twl*(.roda)
-		*.twl*(.rodata.*)
-		*.twl*(.data)
-		*.twl*(.data.*)
-		*.twl*(.gnu.linkonce.d*)
-		__arm9i_end__ = ABSOLUTE(.);
-	} :twl
-
-	.twl_bss __arm9i_end__ (NOLOAD):
-	{
-		__twl_bss_start__ = ABSOLUTE(.);
-		*(.twl_bss)
-		*.twl*(.dynbss)
-		*.twl*(.gnu.linkonce.b*)
-		*.twl*(.bss*)
-		*.twl*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__twl_bss_end__ = ABSOLUTE(.);
-		__twl_end__ = ABSOLUTE(.);
-	} :NONE
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_arm9.mem

@@ -1,6 +0,0 @@
-MEMORY {
-	ewram	: ORIGIN = 0x02000000, LENGTH = 4M - 512k
-	dtcm	: ORIGIN = 0x0b000000, LENGTH = 16K
-	vectors	: ORIGIN = 0x01000000, LENGTH = 256
-	itcm	: ORIGIN = 0x01000100, LENGTH = 32K - 256
-}

dkarm-eabi/crtls/ds_arm9.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm9.mem%s -T ds_arm9.ld%s --gc-sections
-
-*startfile:
-ds_arm9_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_arm9_crt0.s

@@ -1,266 +0,0 @@
-@---------------------------------------------------------------------------------
-@ DS processor selection
-@---------------------------------------------------------------------------------
-	.arch	armv5te
-	.cpu	arm946e-s
-@---------------------------------------------------------------------------------
-
-	.equ	_libnds_argv,0x02FFFE70
-
-@---------------------------------------------------------------------------------
-	.section ".crt0","ax"
-	.global _start
-@---------------------------------------------------------------------------------
-	.align	4
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	mov	r0, #0x04000000		@ IME = 0;
-	str	r0, [r0, #0x208]
-	
-	@ set sensible stacks to allow bios call
-
-	mov	r0, #0x13		@ Switch to SVC Mode
-	msr	cpsr, r0
-	mov	r1,#0x03000000
-	sub	r1,r1,#0x1000
-	mov	sp,r1
-	mov	r0, #0x1F		@ Switch to System Mode
-	msr	cpsr, r0
-	sub	r1,r1,#0x100
-	mov	sp,r1
-
-	ldr	r3, =__libnds_mpu_setup
-	blx	r3
-
-	mov	r0, #0x12		@ Switch to IRQ Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_irq		@ Set IRQ stack
-
-	mov	r0, #0x13		@ Switch to SVC Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_svc		@ Set SVC stack
-
-	mov	r0, #0x1F		@ Switch to System Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_usr		@ Set user stack
-
-	mov	r12, #0x4000000		@ Read system ROM status (NTR/TWL)
-	ldrb	r11, [r12,r12,lsr #12]
-	and	r11, r11, #0x3
-
-	mov	r9, #(0x0<<8)		@ Synchronize with ARM7
-	str	r9, [r12, #0x180]
-	mov	r9, #0x9
-	bl	IPCSync
-	mov	r9, #(0xA<<8)
-	str	r9, [r12, #0x180]
-	mov	r9, #0xB
-	bl	IPCSync
-	mov	r9, #(0xC<<8)
-	str	r9, [r12, #0x180]
-	mov	r9, #0xD
-	bl	IPCSync
-	mov	r9, r11, lsl #8
-	str	r9, [r12, #0x180]
-	mov	r9, #0
-	bl	IPCSync
-	str	r9, [r12, #0x180]
-
-	ldr	r1, =__itcm_lma		@ Copy instruction tightly coupled memory (itcm section) from LMA to VMA
-	ldr	r2, =__itcm_start
-	ldr	r4, =__itcm_end
-	bl	CopyMemCheck
-
-	ldr	r1, =__vectors_lma	@ Copy reserved vectors area (itcm section) from LMA to VMA
-	ldr	r2, =__vectors_start
-	ldr	r4, =__vectors_end
-	bl	CopyMemCheck
-
-	ldr	r1, =__dtcm_lma		@ Copy data tightly coupled memory (dtcm section) from LMA to VMA
-	ldr	r2, =__dtcm_start
-	ldr	r4, =__dtcm_end
-	bl	CopyMemCheck
-
-	cmp	r11, #1
-	ldrne	r10, =__end__		@ (DS mode) heap start
-	ldreq	r10, =__twl_end__	@ (DSi mode) heap start
-	bl	checkARGV		@ check and process argv trickery
-
-	ldr	r0, =__bss_start__	@ Clear BSS section
-	ldr	r1, =__bss_end__
-	sub	r1, r1, r0
-	bl	ClearMem
-
-	ldr	r0, =__sbss_start	@ Clear SBSS section 
-	ldr	r1, =__sbss_end
-	sub	r1, r1, r0
-	bl	ClearMem
-
-	cmp	r11, #1
-	bne	NotTWL
-	ldr	r9, =__dsimode		@ set DSi mode flag
-	strb	r11, [r9]
-
-	@ Copy TWL area (arm9i section) from LMA to VMA
-	ldr	r1, =0x02ffe1c8		@ Get ARM9i LMA from header
-	ldr	r1, [r1]
-
-	ldr	r2, =__arm9i_start__
-	cmp	r1, r2			@ skip copy if LMA=VMA
-	ldrne	r4, =__arm9i_end__
-	blne	CopyMemCheck
-
-	ldr	r0, =__twl_bss_start__	@ Clear TWL BSS section
-	ldr	r1, =__twl_bss_end__
-	sub	r1, r1, r0
-	bl	ClearMem
-
-NotTWL:
-	ldr	r0, =_libnds_argv
-
-	@ reset heap base
-	ldr	r2, [r0,#20]		@ newheap base
-	cmp	r2, #0
-	moveq	r2, r10
-	ldr	r1, =fake_heap_start	@ set heap start
-	str	r2, [r1]
-
-	ldr	r1, =fake_heap_end	@ set heap end
-	sub	r8, r8,#0xc000
-	str	r8, [r1]
-
-	push	{r0}
-	ldr	r0, =__secure_area__
-	ldr	r3, =initSystem
-	blx	r3			@ system initialisation
-
-	ldr	r3, =__libc_init_array	@ global constructors
-	blx	r3
-
-	pop	{r0}
-
-	ldr	r1, [r0,#16]		@ argv
-	ldr	r0, [r0,#12]		@ argc
-
-	ldr	r3, =main
-	ldr	lr, =__libnds_exit
-	bx	r3			@ jump to user code
-
-@---------------------------------------------------------------------------------
-@ check for a commandline 
-@---------------------------------------------------------------------------------
-checkARGV:
-@---------------------------------------------------------------------------------
-	ldr	r0, =_libnds_argv	@ argv structure
-	mov	r1, #0
-	str	r1, [r0,#12]		@ clear argc
-	str	r1, [r0,#16]		@ clear argv
-	
-	ldr	r3, [r0]		@ argv magic number
-	ldr	r2, =0x5f617267		@ '_arg'
-	cmp	r3, r2
-	strne	r1, [r0,#20]
-	bxne	lr			@ bail out if no magic
-	
-	ldr	r1, [r0, #4]		@ command line address
-	ldr	r2, [r0, #8]		@ length of command line
-
-	@ copy to heap
-	mov	r3, r10			@ initial heap base
-	str	r3, [r0, #4]		@ set command line address
-
-	cmp	r2, #0
-	subnes	r4, r3, r1		@ dst-src
-	bxeq	lr			@ dst == src || len==0 : nothing to do.
-	
-	cmphi	r2, r4			@ len > (dst-src)
-	bhi	.copybackward
-
-.copyforward:		
-	ldrb	r4, [r1], #1
-	strb	r4, [r3], #1
-	subs	r2, r2, #1
-	bne	.copyforward
-	b	.copydone
-
-.copybackward:
-	subs	r2, r2, #1
-	ldrb	r4, [r1, r2]
-	strb	r4, [r3, r2]
-	bne	.copybackward
-
-.copydone:
-	push	{lr}
-	ldr	r3, =build_argv
-	blx	r3
-	pop	{lr}
-	bx	lr	
-
-
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-@---------------------------------------------------------------------------------
-	mov	r2, #3			@ Round down to nearest word boundary
-	add	r1, r1, r2		@ Shouldn't be needed
-	bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
-	bxeq	lr			@ Quit if copy size is 0
-
-	mov	r2, #0
-ClrLoop:
-	stmia	r0!, {r2}
-	subs	r1, r1, #4
-	bne	ClrLoop
-
-	bx	lr
-
-@---------------------------------------------------------------------------------
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@---------------------------------------------------------------------------------
-CopyMemCheck:
-@---------------------------------------------------------------------------------
-	sub	r3, r4, r2		@ Is there any data to copy?
-@---------------------------------------------------------------------------------
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@---------------------------------------------------------------------------------
-CopyMem:
-@---------------------------------------------------------------------------------
-	mov	r0, #3			@ These commands are used in cases where
-	add	r3, r3, r0		@ the length is not a multiple of 4,
-	bics	r3, r3, r0		@ even though it should be.
-	bxeq	lr			@ Length is zero, so exit
-CIDLoop:
-	ldmia	r1!, {r0}
-	stmia	r2!, {r0}
-	subs	r3, r3, #4
-	bne	CIDLoop
-
-	bx	lr
-
-@---------------------------------------------------------------------------------
-@ Synchronize with ARM7
-@---------------------------------------------------------------------------------
-IPCSync:
-@---------------------------------------------------------------------------------
-	ldr	r10, [r12, #0x180]
-	and	r10, r10, #0xF
-	cmp	r10, r9
-	bne	IPCSync
-	bx	lr
-
-@---------------------------------------------------------------------------------
-	.align
-	.pool
-	.end
-@---------------------------------------------------------------------------------

dkarm-eabi/crtls/ds_cart.ld

@@ -1,224 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x03800000, LENGTH = 64K	
-	ewram	: ORIGIN = 0x02000000, LENGTH = 4M
-}
-
-__ewram_start	=	ORIGIN(ewram);
-__eheap_end	=	ORIGIN(ewram)+ LENGTH(ewram);
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram)+ LENGTH(iwram);
-__sp_irq	=	__iwram_top - 0x60;
-__sp_svc	=	__sp_irq - 0x100;
-__sp_usr	=	__sp_svc - 0x100;
-
-__irq_flags	=	__iwram_top - 8;
-__irq_vector	=	__iwram_top - 4;
-
-SECTIONS
-{
-	.crt0	:
-	{
-		__text_start = . ;
-		KEEP (*(.crt0))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.init           :
-	{
-		KEEP (*(SORT_NONE(.init)))
-	} >rom = 0xff
-
-	.plt : { *(.plt) } >rom = 0xff
-
-	.init :
-	{
-		KEEP (*(SORT_NONE(.init)))
-	} >ewram
-
-	.text :   /* ALIGN (4): */
-	{
-		*(EXCLUDE_FILE (*.iwram*) .text)
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.fini           :
-	{
-		KEEP (*(.fini))
-	} >rom =0xff
-
-	__text_end = . ;
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) } >rom = 0xff
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) } >rom = 0xff
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) } >rom = 0xff
-  PROVIDE (__fini_array_end = .);
-
-	.ctors :
-	{
-	/* gcc uses crtbegin.o to find the start of the constructors, so
-		we make sure it is first.  Because this is a wildcard, it
-		doesn't matter if the user does not actually link against
-		crtbegin.o; the linker won't look for a file to match a
-		wildcard.  The wildcard also means that it doesn't matter which
-		directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >rom = 0
-	.got            : { *(.got.plt) *(.got) } >rom = 0
-
-	__ewram_lma = . ;
-
-	.ewram __ewram_start : AT (__ewram_lma) 
-	{
-		__ewram_start = ABSOLUTE(.) ;
-		*(.ewram)
-		*ewram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	.sbss ALIGN(4):
- 	{
-		__sbss_start = ABSOLUTE(.);
- 		*(.sbss)
- 		. = ALIGN(4);
- 	} >ewram
-	__sbss_end = . ;
-
-	_end = . ;
-	__end__ = . ;
-	PROVIDE (end = _end);
-
-	__iwram_lma = __ewram_lma + SIZEOF(.ewram) + SIZEOF(.sbss);
-	
-	.iwram __iwram_start : AT (__iwram_lma)
-	{
-		__iwram_start = ABSOLUTE(.) ;
-		*(.iwram)
-		*iwram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
-
-	__iwram_end = . ;
-	__data_lma = __iwram_lma + SIZEOF(.iwram) ;
-
-
-	.data ALIGN(4) : AT (__data_lma)
-	{
-		__data_start = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-	} >iwram = 0xff
-
-	__data_end = . ;
-	__appended_data = __data_lma + SIZEOF(.data) ;
-
-
-	.bss ALIGN(4) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	} >iwram
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/ds_cart.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_cart.ld%s --gc-sections
-
-*startfile:
-ds_cart_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/ds_cart_crt0.s

@@ -1,160 +0,0 @@
-@---------------------------------------------------------------------------------
-	.section ".crt0","ax"
-	.global _start
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b	rom_header_end
-
-@---------------------------------------------------------------------------------
-	.fill   156,1,0				@ Nintendo Logo Character Data (8000004h)
-	.fill	16,1,0				@ Game Title
-	.byte   0x30,0x31			@ Maker Code (80000B0h)
-	.byte   0x96				@ Fixed Value (80000B2h)
-	.byte   0x00				@ Main Unit Code (80000B3h)
-	.byte   0x00				@ Device Type (80000B4h)
-	.fill	7,1,0				@ unused
-	.byte	0x00				@ Software Version No (80000BCh)
-	.byte	0xf0				@ Complement Check (80000BDh)
-	.byte	0x00,0x00    			@ Checksum (80000BEh)
-
-rom_header_end:
-	b	start_vector			@ This branch must be here for proper
-						@ positioning of the following header.
-
-	.GLOBAL	__boot_method, __slave_number
-__boot_method:
-	.byte   0				@ boot method (0=ROM boot, 3=Multiplay boot)
-__slave_number:
-	.byte   0				@ slave # (1=slave#1, 2=slave#2, 3=slave#3)
-
-	.byte   0 				@ reserved
-	.byte   0 				@ reserved
-	.word   0    				@ reserved
-	.word   0				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-@---------------------------------------------------------------------------------
-	.align	4
-	.arm
-@---------------------------------------------------------------------------------
-start_vector:
-@---------------------------------------------------------------------------------
-	mov	r0, #0x04000000		@ IME = 0;
-	str	r0, [r0, #0x208]
-
-	mov	r0, #0x12		@ Switch to IRQ Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_irq		@ Set IRQ stack
-
-	mov	r0, #0x13		@ Switch to SVC Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_svc		@ Set SVC stack
-
-
-	mov	r0, #0x1F		@ Switch to System Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_usr		@ Set user stack
-
-	mov	r1, #0x42
-	strb	r1, [r7], #1
-	mov	r1, #0x35
-	strb	r1, [r7], #1
-	mov	r1, #0x2B
-	strb	r1, [r7], #1
-	mov	r1, #0x2B
-	strb	r1, [r7], #1
-
-	ldr	r1, =__data_lma		@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
-	ldr	r2, =__data_start
-	ldr	r4, =__data_end
-	bl	CopyMemChk
-
-	ldr	r1, =__iwram_lma	@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
-	ldr	r2, =__iwram_start
-	ldr	r4, =__iwram_end
-	bl	CopyMemChk
-
-	ldr	r0, =__bss_start	@ Clear BSS section to 0x00
-	ldr	r1, =__bss_end
-	sub	r1, r1, r0
-	bl	ClearMem
-
-	ldr	r0, =__sbss_start	@ Clear SBSS section to 0x00
-	ldr	r1, =__sbss_end
-	sub	r1, r1, r0
-	bl	ClearMem
-
-	ldr	r1, =fake_heap_end	@ set heap end
-	ldr	r0, =__eheap_end
-	str	r0, [r1]
-	
-	ldr	r3, =__libc_init_array	@ global constructors
-	bl	_call_via_r3
-
-	mov	r0, #0			@ int argc
-	mov	r1, #0			@ char *argv[]
-	ldr	r3, =main
-	bl	_call_via_r3		@ jump to user code
-
-
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-	mov	r2, #3			@ Round down to nearest word boundary
-	add	r1, r1, r2		@ Shouldn't be needed
-	bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
-	bxeq	lr			@ Quit if copy size is 0
-
-	mov	r2, #0
-@---------------------------------------------------------------------------------
-ClrLoop:
-@---------------------------------------------------------------------------------
-	stmia	r0!, {r2}
-	subs	r1, r1, #4
-	bne	ClrLoop
-	bx	lr
-
-@---------------------------------------------------------------------------------
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@---------------------------------------------------------------------------------
-CopyMemChk:
-@---------------------------------------------------------------------------------
-	sub	r3, r4, r2		@ Is there any data to copy?
-@---------------------------------------------------------------------------------
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@---------------------------------------------------------------------------------
-CopyMem:
-@---------------------------------------------------------------------------------
-	mov	r0, #3			@ These commands are used in cases where
-	add	r3, r3, r0		@ the length is not a multiple of 4,
-	bics	r3, r3, r0		@ even though it should be.
-	bxeq	lr			@ Length is zero so exit
-
-@---------------------------------------------------------------------------------
-CIDLoop:
-@---------------------------------------------------------------------------------
-	ldmia	r1!, {r0}
-	stmia	r2!, {r0}
-	subs	r3, r3, #4
-	bne	CIDLoop
-	bx	lr
-@---------------------------------------------------------------------------------
-	.align
-	.pool
-@---------------------------------------------------------------------------------
-	.end
-@---------------------------------------------------------------------------------
-

dkarm-eabi/crtls/dsi_arm9.mem

@@ -1,6 +0,0 @@
-MEMORY {
-	ewram	: ORIGIN = 0x02000000, LENGTH = 15M - 512k
-	dtcm	: ORIGIN = 0x0b000000, LENGTH = 16K
-	vectors	: ORIGIN = 0x01000000, LENGTH = 256
-	itcm	: ORIGIN = 0x01000100, LENGTH = 32K - 256
-}

dkarm-eabi/crtls/dsi_arm9.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T dsi_arm9.mem%s -T ds_arm9.ld%s --gc-sections
-
-*startfile:
-ds_arm9_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/er_crt0.s

@@ -1,56 +0,0 @@
-@---------------------------------------------------------------------------------
-@ nintendo e-reader startup code
-@---------------------------------------------------------------------------------
-@ author  : tim schuerewegen
-@ version : 1.0
-@---------------------------------------------------------------------------------
-	.section	".crt0","ax"
-	.global     _start
-	.align
-	.arm
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b	start_vector
-	.long 0
-	.long 0x02000000
-
-start_vector:
-	@ enter thumb mode
-	adr		r0, _start_thumb + 1
-	bx		r0
-
-	.thumb
-
-_start_thumb:
-
-	@ save return address (rom)
-	mov		r3, lr
-
-	@ clear bss section
-	ldr		r0, =__bss_start
-	ldr		r1, =__bss_end
-	mov		r2, #0
-_loop_bss_clear:
-	strb	r2, [r0]
-	add		r0, #1
-	cmp		r0, r1
-	blt		_loop_bss_clear
-
-	@ set return address (rom)
-	mov		lr, r3
-
-	@ jump to main
-	ldr		r3, =main
-	bx		r3
-
-	.align
-
-	.pool
-
-	.end
-
-	.align
-	.pool
-	.end
-

dkarm-eabi/crtls/gba.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T gba_cart.ld%s --gc-sections
-
-*startfile:
-gba_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/gba_cart.ld

@@ -1,318 +0,0 @@
-/* Linker Script Original v1.3 by Jeff Frohwein     */
-/*  v1.0 - Original release                         */
-/*  v1.1 - Added proper .data section support       */
-/*  v1.2 - Added support for c++ & iwram overlays   */
-/*       - Major contributions by Jason Wilkins.    */
-/*  v1.3 - .ewram section now can be used when      */
-/*         compiling for MULTIBOOT mode. This fixes */
-/*         malloc() in DevKitAdvance which depends  */
-/*         on __eheap_start instead of end to define*/
-/*         the starting location of heap space.     */
-/*         External global variable __gba_iwram_heap*/
-/*         support added to allow labels end, _end, */
-/*         & __end__ to point to end of iwram or    */
-/*         the end of ewram.                        */
-/*	Additions by WinterMute				*/
-/* v1.4 -	.sbss section added for unitialised	*/
-/*		    data in ewram 			*/
-/* v1.5 -	padding section added to stop EZF 	*/
-/*		    stripping important data		*/
-
-/* This file is released into the public domain		*/
-/* for commercial or non-commercial use with no		*/
-/* restrictions placed upon it.				*/
-
-/* NOTE!!!: This linker script defines the RAM &  */
-/*   ROM start addresses. In order for it to work */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-/* SEARCH_DIR(/bin/arm); */
-
-/* The linker script function "var1 += var2;" sometimes    */
-/* reports incorrect values in the *.map file but the      */
-/* actual value it calculates is usually, if not always,   */
-/* correct. If you leave out the ". = ALIGN(4);" at the    */
-/* end of each section then the return value of SIZEOF()   */
-/* is sometimes incorrect and "var1 += var2;" appears to   */
-/* not work as well. "var1 += var2" style functions are    */
-/* avoided below as a result.                              */
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x03000000, LENGTH = 32K
-	ewram	: ORIGIN = 0x02000000, LENGTH = 256K
-}
-
-__text_start	=	ORIGIN(rom);
-__eheap_end	=	ORIGIN(ewram) + LENGTH(ewram);
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram) + LENGTH(iwram);;
-__sp_irq	=	__iwram_top - 0x060;
-__sp_usr	=	__sp_irq - 0x0a0;
-__irq_flags	=	0x03007ff8;
-
-SECTIONS
-{
-	. = __text_start;
-	.crt0 :
-	{
-		KEEP (*(.crt0))
-		. = ALIGN(4);
-	} >rom =0xff
-
-
-	.init :
-	{
-		KEEP (*(SORT_NONE(.init)))
-	} >rom
-
-	.plt :
-	{
-		*(.plt)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom
-
-	.text  :   /* ALIGN (4): */
-	{
-		*(EXCLUDE_FILE (*.iwram*) .text)
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-
-	__text_end = .;
-	.fini           :
-	{
-		KEEP (*(.fini))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >rom =0
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0xff
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >rom
-	__exidx_start = .;
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >rom
-	__exidx_end = .;
-
-	.ctors :
-	{
-		/*	gcc uses crtbegin.o to find the start of the constructors, so
-			we make sure it is first.  Because this is a wildcard, it
-			doesn't matter if the user does not actually link against
-			crtbegin.o; the linker won't look for a file to match a
-			wildcard.  The wildcard also means that it doesn't matter which
-			directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0
-
-
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >rom = 0
-
-	__iwram_lma = .;
-
-	.iwram __iwram_start : AT (__iwram_lma)
-	{
-		__iwram_start__ = ABSOLUTE(.) ;
-		*(.iwram)
-		*iwram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-		__iwram_end__ = ABSOLUTE(.) ;
-	} >iwram = 0xff
-
-	__data_lma = __iwram_lma + SIZEOF(.iwram) ;
-
-	.bss ALIGN(4) (NOLOAD) :
-	{
-		__bss_start = ABSOLUTE(.);
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.);
-
-	} AT>iwram
-
-	.data ALIGN(4) : AT (__data_lma)
-	{
-		__data_start__ = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);
-	} >iwram = 0xff
-
-	__preinit_lma = __data_lma + SIZEOF(.data);
-
-	.preinit_array ALIGN(4)    : AT (__preinit_lma)
-	{
-		__preinit_array_start = ABSOLUTE(.);
-		KEEP (*(.preinit_array))
-		__preinit_array_end = ABSOLUTE(.);
-	} >iwram
-
-	__init_lma = __preinit_lma + SIZEOF(.preinit_array);
-
-	.init_array  ALIGN(4)   : AT (__init_lma)
-	{
-		__init_array_start = ABSOLUTE(.);
-		KEEP (*(SORT(.init_array.*)))
-		KEEP (*(.init_array))
-		__init_array_end = ABSOLUTE(.);
-	} >iwram
-
-	__fini_lma = __init_lma + SIZEOF(.init_array);
-
-	.fini_array  ALIGN(4)   : AT (__fini_lma)
-	{
-		__fini_array_start = ABSOLUTE(.);
-		KEEP (*(SORT(.fini_array.*)))
-		KEEP (*(.fini_array))
-  		__fini_array_end = ABSOLUTE(.);
-	} >iwram
-
-	__jcr_lma = __fini_lma + SIZEOF(.fini_array);
-	.jcr        ALIGN(4)    : AT (__jcr_lma) { KEEP (*(.jcr)) } >iwram
-
-	__data_end__  =  ABSOLUTE(.);
-	__iwram_overlay_lma = __jcr_lma + SIZEOF(.jcr);
-
-	__iwram_overlay_start = . ;
-
-	OVERLAY ALIGN(4) : NOCROSSREFS AT (__iwram_overlay_lma)
-	{
-		.iwram0 { *(.iwram0) . = ALIGN(4);}
-		.iwram1 { *(.iwram1) . = ALIGN(4);}
-		.iwram2 { *(.iwram2) . = ALIGN(4);}
-		.iwram3 { *(.iwram3) . = ALIGN(4);}
-		.iwram4 { *(.iwram4) . = ALIGN(4);}
-		.iwram5 { *(.iwram5) . = ALIGN(4);}
-		.iwram6 { *(.iwram6) . = ALIGN(4);}
-		.iwram7 { *(.iwram7) . = ALIGN(4);}
-		.iwram8 { *(.iwram8) . = ALIGN(4);}
-		.iwram9 { *(.iwram9) . = ALIGN(4);}
-	}>iwram = 0xff
-
-	__iwram_overlay_end = . ;
-	__ewram_lma = __iwram_overlay_lma + (__iwram_overlay_end - __iwram_overlay_start) ;
-
-	__iheap_start = . ;
-
-	__ewram_start = ORIGIN(ewram);
-	.ewram __ewram_start : AT (__ewram_lma)
-	{
-		*(.ewram)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		__ewram_end = ABSOLUTE(.);
-	}>ewram = 0xff
-
-	__pad_lma = __ewram_lma + SIZEOF(.ewram);
-
-	.sbss ALIGN(4)(NOLOAD):
- 	{
-		__sbss_start__ = ABSOLUTE(.);
- 		*(.sbss)
- 		. = ALIGN(4);
-		__sbss_end__  = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-		__eheap_start = ABSOLUTE(.);
- 	} AT>ewram
-
-	/* EZF Advance strips trailing 0xff bytes, add a pad section so nothing important is removed */
-	.pad ALIGN(4) : AT (__pad_lma)
-	{
-		LONG(0x52416b64)
-		LONG(0x4d)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} = 0xff
-	__rom_end__ = __pad_lma + SIZEOF(.pad);
-
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
-  .ARM.attributes 0 : { KEEP (*(.ARM.attributes)) }
-  /DISCARD/ : { *(.note.GNU-stack) }
-}

dkarm-eabi/crtls/gba_crt0.s

@@ -1,249 +0,0 @@
-	.section	".crt0","ax"
-	.global     _start
-	.align
-
-	.arm
-	.cpu arm7tdmi
-
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b	rom_header_end
-
-	.fill   156,1,0			@ Nintendo Logo Character Data (8000004h)
-	.fill	16,1,0			@ Game Title
-	.byte   0x30,0x31		@ Maker Code (80000B0h)
-	.byte   0x96			@ Fixed Value (80000B2h)
-	.byte   0x00			@ Main Unit Code (80000B3h)
-	.byte   0x00			@ Device Type (80000B4h)
-	.fill	7,1,0			@ unused
-	.byte	0x00			@ Software Version No (80000BCh)
-	.byte	0xf0			@ Complement Check (80000BDh)
-	.byte	0x00,0x00    		@ Checksum (80000BEh)
-
-@---------------------------------------------------------------------------------
-rom_header_end:
-@---------------------------------------------------------------------------------
-	b	start_vector			@ This branch must be here for proper
-						@ positioning of the following header.
-
-	.GLOBAL	__boot_method, __slave_number
-@---------------------------------------------------------------------------------
-__boot_method:
-@---------------------------------------------------------------------------------
-	.byte   0				@ boot method (0=ROM boot, 3=Multiplay boot)
-@---------------------------------------------------------------------------------
-__slave_number:
-@---------------------------------------------------------------------------------
-	.byte   0				@ slave # (1=slave#1, 2=slave#2, 3=slave#3)
-
-	.byte   0 				@ reserved
-	.byte   0 				@ reserved
-	.word   0    				@ reserved
-	.word   0				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-	.word   0    				@ reserved
-
-	.global     start_vector
-	.align
-@---------------------------------------------------------------------------------
-start_vector:
-@---------------------------------------------------------------------------------
-	mov	r0, #0x4000000			@ REG_BASE
-	str	r0, [r0, #0x208]
-
-	mov	r0, #0x12			@ Switch to IRQ Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_irq			@ Set IRQ stack
-	mov	r0, #0x1f			@ Switch to System Mode
-	msr	cpsr, r0
-	ldr	sp, =__sp_usr			@ Set user stack
-
-@---------------------------------------------------------------------------------
-@ Enter Thumb mode
-@---------------------------------------------------------------------------------
-	add	r0, pc, #1
-	bx	r0
-
-	.thumb
-
-	ldr	r0, =__text_start
-	lsl	r0, #5				@ Was code compiled at 0x08000000 or higher?
-	bcs     DoEWRAMClear			@ yes, you can not run it in external WRAM
-
-	mov     r0, pc
-	lsl     r0, #5				@ Are we running from ROM (0x8000000 or higher) ?
-	bcc     SkipEWRAMClear			@ No, so no need to do a copy.
-
-@---------------------------------------------------------------------------------
-@ We were started in ROM, silly emulators. :P
-@ So we need to copy to ExWRAM.
-@---------------------------------------------------------------------------------
-	mov	r2, #2
-	lsl	r2, r2, #24			@ r2= 0x02000000
-	ldr	r3, =__end__			@ last ewram address
-	sub	r3, r2				@ r3= actual binary size
-	mov	r6, r2				@ r6= 0x02000000
-	lsl	r1, r2, #2			@ r1= 0x08000000
-
-	bl	CopyMem
-
-	bx	r6				@ Jump to the code to execute
-
-@---------------------------------------------------------------------------------
-DoEWRAMClear:					@ Clear External WRAM to 0x00
-@---------------------------------------------------------------------------------
-	mov	r1, #0x40
-	lsl	r1, #12				@ r1 = 0x40000
-	lsl	r0, r1, #7			@ r0 = 0x2000000
-	bl	ClearMem
-
-@---------------------------------------------------------------------------------
-SkipEWRAMClear:					@ Clear Internal WRAM to 0x00
-@---------------------------------------------------------------------------------
-
-@---------------------------------------------------------------------------------
-@ Clear BSS section to 0x00
-@---------------------------------------------------------------------------------
-	ldr	r0, =__bss_start__
-	ldr	r1, =__bss_end__
-	sub	r1, r0
-	bl	ClearMem
-
-@---------------------------------------------------------------------------------
-@ Clear SBSS section to 0x00
-@---------------------------------------------------------------------------------
-	ldr	r0, =__sbss_start__
-	ldr	r1, =__sbss_end__
-	sub	r1, r0
-	bl	ClearMem
-
-@---------------------------------------------------------------------------------
-@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
-@---------------------------------------------------------------------------------
-	ldr	r1, =__data_lma
-	ldr	r2, =__data_start__
-	ldr	r4, =__data_end__
-	bl	CopyMemChk
-
-@---------------------------------------------------------------------------------
-@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
-@---------------------------------------------------------------------------------
-	ldr	r1,= __iwram_lma
-	ldr	r2,= __iwram_start__
-	ldr	r4,= __iwram_end__
-	bl	CopyMemChk
-
-@---------------------------------------------------------------------------------
-@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
-@---------------------------------------------------------------------------------
-	ldr	r2,= __load_stop_iwram0
-	ldr	r1,= __load_start_iwram0
-	sub	r3, r2, r1			@ Is there any data to copy?
-	beq	CIW0Skip			@ no
-
-	ldr	r2,= __iwram_overlay_start
-	bl	CopyMem
-@---------------------------------------------------------------------------------
-CIW0Skip:
-@---------------------------------------------------------------------------------
-@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
-@---------------------------------------------------------------------------------
-	ldr	r1, =__ewram_lma
-	ldr	r2, =__ewram_start
-	ldr	r4, =__ewram_end
-	bl	CopyMemChk
-
-@---------------------------------------------------------------------------------
-CEW0Skip:
-@---------------------------------------------------------------------------------
-@ set heap end
-@---------------------------------------------------------------------------------
-	ldr	r1, =fake_heap_end
-	ldr	r0, =__eheap_end
-	str	r0, [r1]
-@---------------------------------------------------------------------------------
-@ global constructors
-@---------------------------------------------------------------------------------
-	ldr	r3, =__libc_init_array
-	bl	_blx_r3_stub
-@---------------------------------------------------------------------------------
-@ Jump to user code
-@---------------------------------------------------------------------------------
-	mov	r0, #0				@ int argc
-	mov	r1, #0				@ char	*argv[]
-	ldr	r3, =main
-	bl	_blx_r3_stub
-@---------------------------------------------------------------------------------
-@ Clear memory to 0x00 if length != 0
-@---------------------------------------------------------------------------------
-@ r0 = Start Address
-@ r1 = Length
-@---------------------------------------------------------------------------------
-ClearMem:
-@---------------------------------------------------------------------------------
-	mov	r2,#3				@ These	commands are used in cases where
-	add	r1,r2				@ the length is	not a multiple of 4,
-	bic	r1,r2				@ even though it should be.
-
-	beq	ClearMX				@ Length is zero so exit
-
-	mov	r2,#0
-@---------------------------------------------------------------------------------
-ClrLoop:
-@---------------------------------------------------------------------------------
-	stmia	r0!, {r2}
-	sub	r1,#4
-	bne	ClrLoop
-@---------------------------------------------------------------------------------
-ClearMX:
-@---------------------------------------------------------------------------------
-	bx	lr
-
-@---------------------------------------------------------------------------------
-_blx_r3_stub:
-@---------------------------------------------------------------------------------
-	bx	r3
-
-@---------------------------------------------------------------------------------
-@ Copy memory if length	!= 0
-@---------------------------------------------------------------------------------
-@ r1 = Source Address
-@ r2 = Dest Address
-@ r4 = Dest Address + Length
-@---------------------------------------------------------------------------------
-CopyMemChk:
-@---------------------------------------------------------------------------------
-	sub	r3, r4, r2			@ Is there any data to copy?
-@---------------------------------------------------------------------------------
-@ Copy memory
-@---------------------------------------------------------------------------------
-@ r1 = Source Address
-@ r2 = Dest Address
-@ r3 = Length
-@---------------------------------------------------------------------------------
-CopyMem:
-@---------------------------------------------------------------------------------
-	mov	r0, #3				@ These commands are used in cases where
-	add	r3, r0				@ the length is not a multiple	of 4,
-	bic	r3, r0				@ even	though it should be.
-	beq	CIDExit				@ Length is zero so exit
-
-@---------------------------------------------------------------------------------
-CIDLoop:
-@---------------------------------------------------------------------------------
-	ldmia	r1!, {r0}
-	stmia	r2!, {r0}
-	sub	r3, #4
-	bne	CIDLoop
-@---------------------------------------------------------------------------------
-CIDExit:
-@---------------------------------------------------------------------------------
-	bx	lr
-
-	.align
-	.pool
-	.end
-

dkarm-eabi/crtls/gba_er.ld

@@ -1,49 +0,0 @@
-/***********************************/
-/* NINTENDO E-READER LINKER SCRIPT */
-/***********************************/
-/* Author  : Tim Schuerewegen      */
-/* Version : 1.0                   */
-/***********************************/
-
-OUTPUT_FORMAT( "elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH( arm)
-ENTRY( _start)
-
-SECTIONS
-{
-	.  = 0x02000000;
-
-	.crt0 :
-	{
-		*(.crt0)
-		. = ALIGN(4);
-	} = 0xff
-
-	.text :
-	{
-		*(.text)
-		. = ALIGN(4);
-	} = 0xff
-
-	.rodata :
-	{
-		*(.rodata)
-		. = ALIGN(4);
-	} = 0xff
-
-	.data :
-	{
-		*(.data)
-		. = ALIGN(4);
-	} = 0xff
-
-	.bss :
-	{
-		__bss_start = .;
-		*(.bss)
-		. = ALIGN(4);
-		__bss_end__ = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-	}
-}
-

dkarm-eabi/crtls/gba_er.specs

@@ -1,8 +0,0 @@
-%rename link		old_link
-%rename endfile		old_endfile
-
-*link:
--T gba_er.ld%s %(old_link) --gc-sections
-
-*startfile:
-er_crt0%O%s

dkarm-eabi/crtls/gba_mb.ld

@@ -1,303 +0,0 @@
-/* Linker Script Original v1.3 by Jeff Frohwein     */
-/*  v1.0 - Original release                         */
-/*  v1.1 - Added proper .data section support       */
-/*  v1.2 - Added support for c++ & iwram overlays   */
-/*       - Major contributions by Jason Wilkins.    */
-/*  v1.3 - .ewram section now can be used when      */
-/*         compiling for MULTIBOOT mode. This fixes */
-/*         malloc() in DevKitAdvance which depends  */
-/*         on __eheap_start instead of end to define*/
-/*         the starting location of heap space.     */
-/*         External global variable __gba_iwram_heap*/
-/*         support added to allow labels end, _end, */
-/*         & __end__ to point to end of iwram or    */
-/*         the end of ewram.                        */
-/*	Additions by WinterMute	               	*/
-/* v1.4 -	.sbss section added for unitialised		*/
-/*		    data in ewram 							*/
-/* v1.5 -	padding section added to stop EZF 		*/
-/*		    stripping important data				*/
-/* v1.6 -	added memory sections			 		*/
-
-/* This file is released into the public domain		*/
-/* for commercial or non-commercial use with no		*/
-/* restrictions placed upon it.						*/
-
-/* NOTE!!!: This linker script defines the RAM &  */
-/*   ROM start addresses. In order for it to work */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY {
-
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	iwram	: ORIGIN = 0x03000000, LENGTH = 32K
-	ewram	: ORIGIN = 0x02000000, LENGTH = 256K
-}
-
-
-
-__text_start	=	ORIGIN(ewram);
-__eheap_end	=	ORIGIN(ewram) + LENGTH(ewram);
-__iwram_start	=	ORIGIN(iwram);
-__iwram_top	=	ORIGIN(iwram) + LENGTH(iwram);;
-
-__sp_irq	=	__iwram_top - 0x060;
-__sp_usr	=	__sp_irq - 0x0a0;
-__irq_flags	=	0x03007ff8;
-
-SECTIONS
-{
-	. = __text_start;
-	. = __text_start;
-	.crt0 :
-	{
-		KEEP (*(.crt0))
-		. = ALIGN(4);
-	} >ewram =0xff
-
-	.init :
-	{
-		KEEP (*(SORT_NONE(.init)))
-	} >ewram
-
-	.plt :
-	{
-		*(.plt)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram
-
-
-	.text  ALIGN (4):
-	{
-		*(EXCLUDE_FILE (*.iwram*) .text)
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-	__text_end = .;
-	.fini           :
-	{
-		KEEP (*(.fini))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram =0
-
-	.rodata :
-	{
-		*(.rodata)
-		*all.rodata*(*)
-		*(.roda)
-		*(.rodata.*)
-		*(.gnu.linkonce.r*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
-
-  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ewram
-   __exidx_start = .;
-  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ewram
-   __exidx_end = .;
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) } >ewram = 0xff
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) } >ewram = 0xff
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) } >ewram = 0xff
-  PROVIDE (__fini_array_end = .);
-	.ctors :
-	{
-		/*	gcc uses crtbegin.o to find the start of the constructors, so
-			we make sure it is first.  Because this is a wildcard, it
-			doesn't matter if the user does not actually link against
-			crtbegin.o; the linker won't look for a file to match a
-			wildcard.  The wildcard also means that it doesn't matter which
-			directory crtbegin.o is in.  */
-		KEEP (*crtbegin.o(.ctors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0
-
-	.dtors :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0
-
-	.jcr            : { KEEP (*(.jcr)) } >ewram
-	.eh_frame :
-	{
-		KEEP (*(.eh_frame))
-	. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0
-
-	.gcc_except_table :
-	{
-		*(.gcc_except_table)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0
-
-	__iwram_lma = .;
-
-	.iwram __iwram_start : AT (__iwram_lma)
-	{
-		__iwram_start__ = ABSOLUTE(.) ;
-		*(.iwram)
-		*iwram.*(.text)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-		__iwram_end__ = ABSOLUTE(.) ;
-	} >iwram = 0xff
-
-	__data_lma = __iwram_lma + SIZEOF(.iwram) ;
-
-	.bss ALIGN(4) (NOLOAD):
-	{
-		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
-		*(.gnu.linkonce.b*)
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-		__bss_end__ = ABSOLUTE(.) ;
-	}
-
-	.data ALIGN(4) : AT (__data_lma)
-	{
-		__data_start__ = ABSOLUTE(.);
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d*)
-		CONSTRUCTORS
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		__data_end__  =  ABSOLUTE(.);
-	} >iwram = 0xff
-
-	__iwram_overlay_lma = __data_lma + SIZEOF(.data);
-
-	PROVIDE (edata = .);
-	__iwram_overlay_start = . ;
-
-	OVERLAY ALIGN(4) : NOCROSSREFS AT (__iwram_overlay_lma)
-	{
-	   .iwram0 { *(.iwram0) . = ALIGN(4);}
-	   .iwram1 { *(.iwram1) . = ALIGN(4);}
-	   .iwram2 { *(.iwram2) . = ALIGN(4);}
-	   .iwram3 { *(.iwram3) . = ALIGN(4);}
-	   .iwram4 { *(.iwram4) . = ALIGN(4);}
-	   .iwram5 { *(.iwram5) . = ALIGN(4);}
-	   .iwram6 { *(.iwram6) . = ALIGN(4);}
-	   .iwram7 { *(.iwram7) . = ALIGN(4);}
-	   .iwram8 { *(.iwram8) . = ALIGN(4);}
-	   .iwram9 { *(.iwram9) . = ALIGN(4);}
-	} >iwram = 0xff
-
-	__ewram_lma = LOADADDR(.iwram0) + SIZEOF(.iwram0)+SIZEOF(.iwram1)+SIZEOF(.iwram2)+SIZEOF(.iwram3)+SIZEOF(.iwram4)+SIZEOF(.iwram5)+SIZEOF(.iwram6)+SIZEOF(.iwram7)+SIZEOF(.iwram8)+SIZEOF(.iwram9);
-
-	__iwram_overlay_end = __ewram_lma ;
-
-	/* v1.3 */
-	__ewram_start =  __ewram_lma ;
-
-	.ewram __ewram_start : AT (__ewram_lma)
-	{
-		*(.ewram)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		__ewram_end = ABSOLUTE(.);
-	} >ewram = 0xff
-
-	__ewram_overlay_lma = __ewram_lma + SIZEOF(.ewram);
-
-	.sbss ALIGN(4)(NOLOAD):
- 	{
-		__sbss_start__ = ABSOLUTE(.);
-		*(.sbss)
-		. = ALIGN(4);
-		__sbss_end__  = ABSOLUTE(.);
-		__end__ = ABSOLUTE(.);
-		__eheap_start = ABSOLUTE(.);
-	}
-
-	OVERLAY ALIGN(4): NOCROSSREFS AT (__ewram_overlay_lma)
-	{
-		.ewram0 { *(.ewram0) . = ALIGN(4);}
-		.ewram1 { *(.ewram1) . = ALIGN(4);}
-		.ewram2 { *(.ewram2) . = ALIGN(4);}
-		.ewram3 { *(.ewram3) . = ALIGN(4);}
-		.ewram4 { *(.ewram4) . = ALIGN(4);}
-		.ewram5 { *(.ewram5) . = ALIGN(4);}
-		.ewram6 { *(.ewram6) . = ALIGN(4);}
-		.ewram7 { *(.ewram7) . = ALIGN(4);}
-		.ewram8 { *(.ewram8) . = ALIGN(4);}
-		.ewram9 { *(.ewram9) . = ALIGN(4);}
-	} >ewram = 0xff
-	__ewram_overlay_end  = ABSOLUTE(.);
-
-	__eheap_start = __ewram_overlay_end ;
-
-	_end = __ewram_overlay_end;
-	__end__ = __ewram_overlay_end;
-	__rom_end__ = __ewram_overlay_end;
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/* DWARF debug sections.
-	   Symbols in the DWARF debugging sections are relative to the beginning
-	   of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/gba_mb.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
--T gba_mb.ld%s %(old_link) --gc-sections
-
-*startfile:
-gba_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/gp32.ld

@@ -1,171 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-
-MEMORY
-  {
-  ram : ORIGIN = 0xc000000, LENGTH = 8M
-  }
-
-SECTIONS
-{
-  .crt0           :
-  {
-    __text_start = . ;
-    KEEP (*(.crt0))
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  .init :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >ram
-
-  .plt            : { *(.plt) } >ram = 0xff
-
- 
- 	.text :   /* ALIGN (4): */
-	{
-		*(.text .stub .text.* .gnu.linkonce.t.*)
-		KEEP (*(.text.*personality*))
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-  .fini           :
-  {
-    KEEP (*(.fini))
-  } >ram =0xff
-
-  __text_end = . ;
-
-  .rodata :
-  {
-    *(.rodata)
-    *all.rodata*(*)
-    *(.roda)
-    *(.rodata.*)
-    *(.gnu.linkonce.r*)
-    SORT(CONSTRUCTORS)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ram
-   __exidx_start = .;
-  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ram
-   __exidx_end = .;
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) } >ram = 0xff
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) } >ram = 0xff
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) } >ram = 0xff
-  PROVIDE (__fini_array_end = .);
-  .ctors :
-  {
-    /* gcc uses crtbegin.o to find the start of the constructors, so
-       we make sure it is first.  Because this is a wildcard, it
-       doesn't matter if the user does not actually link against
-       crtbegin.o; the linker won't look for a file to match a
-       wildcard.  The wildcard also means that it doesn't matter which
-       directory crtbegin.o is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .dtors :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .eh_frame :
-  {
-    KEEP (*(.eh_frame))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .gcc_except_table :
-  {
-    *(.gcc_except_table)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-  .jcr            : { KEEP (*(.jcr)) } >ram = 0
-  .got            : { *(.got.plt) *(.got) } >ram = 0
-  __ro_end = . ;
-
-  .data ALIGN(4) :
-  {
-    __data_start = ABSOLUTE(.);
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  __data_end  =  ABSOLUTE(.);
-  } >ram = 0xff
-
-
-  .bss ALIGN(4) :
-  {
-   __bss_start = ABSOLUTE(.);
-   /* __bss_start__ = ABSOLUTE(.); */
-   *(.dynbss)
-   *(.gnu.linkonce.b*)
-   *(.bss*)
-   *(COMMON)
-   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-  __bss_end = ABSOLUTE(.) ;
-  __end__ = ABSOLUTE(.) ;
-  } > ram
-
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  .stack 0x80000 : { _stack = .; *(.stack) }
-  /* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/gp32.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T gp32.ld%s --gc-sections
-
-*startfile:
-gp32_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/gp32_crt0.s

@@ -1,74 +0,0 @@
-    .section	".crt0","ax"
-	.code 32
-	.align
-	.global _start
-@---------------------------------------------------------------------------------
-_start:
-@---------------------------------------------------------------------------------
-	b		_start2
-
-@---------------------------------------------------------------------------------
-@ AXF addresses
-@---------------------------------------------------------------------------------
-_text_start:
-	.word   __text_start
-_ro_end:
-	.word   __ro_end
-_data_start:
-	.word   __data_start
-	.word   __bss_end
-_bss_start:
-	.word   __bss_start
-_bss_end:
-	.word   __bss_end
-
-@---------------------------------------------------------------------------------
-@ GamePark magic sequence
-@---------------------------------------------------------------------------------
-	.word   0x44450011
-	.word   0x44450011
-	.word   0x01234567
-	.word   0x12345678
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-
-@---------------------------------------------------------------------------------
-_start2:
-@---------------------------------------------------------------------------------
-	mrs		r0, CPSR
-	orr		r0, r0, #0xC0
-	msr		CPSR_ctl, r0
-
-	mrs		r0, CPSR
-	bic		r0, r0, #0xC0
-	orr		r0, r0, #0x40
-	msr		CPSR_ctl,r0
-
-@---------------------------------------------------------------------------------
-@ global constructors
-@---------------------------------------------------------------------------------
-	ldr		r3,=_call_main
-	mov		lr,r3
-	ldr		r3,=__libc_init_array
-	bx		r3
-@---------------------------------------------------------------------------------
-@ Jump to user code
-@---------------------------------------------------------------------------------
-_call_main:
-@---------------------------------------------------------------------------------
-	mov		lr, #0
-	ldr		r3, =main
-	bx		r3
-
-	.pool
-	.end

dkarm-eabi/crtls/gp32_gpsdk.ld

@@ -1,213 +0,0 @@
-/* GP32 Linker Script v1.2 by Jeff F              */
-/*  v1.0 - Original release                       */
-/*  v1.1 - Cleaned up and added MEMORY command    */
-/*	v1.2 - DJWillis - Added propper .init and     */
-/*         .fini for GCC 3.3.2 and above          */
-/*                                                */
-/* This file is released into the public domain   */
-/* for commercial or non-commercial use with no   */
-/* restrictions placed upon it.                   */
-/*                                                */
-/* NOTE!!!: This linker script defines the RAM    */
-/*   start addresses. In order for it to work     */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-/*                                                */
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/*                                                */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-/* SEARCH_DIR(/bin/arm); */
-
-/* Then use it like this: IWRAMHEAP                        */
-/* The linker script function "var1 += var2;" sometimes    */
-/* reports incorrect values in the *.map file but the      */
-/* actual value it calculates is usually, if not always,   */
-/* correct. If you leave out the ". = ALIGN(4);" at the    */
-/* end of each section then the return value of SIZEOF()   */
-/* is sometimes incorrect and "var1 += var2;" appears to   */
-/* not work as well. "var1 += var2" style functions are    */
-/* avoided below as a result.                              */
-
-/* The linker script MEMORY directive is not used here due    */
-/* to the fact that __text_start is not always a fixed value. */
-
-MEMORY
-  {
-  ram : ORIGIN = 0xc000000, LENGTH = 8M
-  }
-
-SECTIONS
-{
-  .text :   /* ALIGN (4): */
-  {
-    __text_start = . ;
-
-    *(EXCLUDE_FILE (*text.iwram*) .text)
-    *(.text.*)
-    *(.stub)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-    *(.glue_7)
-    *(.glue_7t)
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  __text_end = . ;
-
-
-  .init :
-  { 
-    *(.init) 
-  } > ram = 0xff
-
-  .jcr : 
-  { 
-    *(.jcr) 
-  } > ram = 0xff
-
-  .fini : 
-  { 
-    *(.fini) 
-  } > ram = 0xff
-
-  .rodata :
-  {
-    *(.rodata)
-    *all.rodata*(*)
-    *(.roda)
-    *(.rodata.*)
-    *(.gnu.linkonce.r*)
-    SORT(CONSTRUCTORS)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ram
-   __exidx_start = .;
-  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ram
-   __exidx_end = .;
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { KEEP (*(.preinit_array)) } >ram = 0xff
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { KEEP (*(.init_array)) } >ram = 0xff
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { KEEP (*(.fini_array)) } >ram = 0xff
-  PROVIDE (__fini_array_end = .);
-
-  .ctors :
-  {
-    /* gcc uses crtbegin.o to find the start of the constructors, so
-       we make sure it is first.  Because this is a wildcard, it
-       doesn't matter if the user does not actually link against
-       crtbegin.o; the linker won't look for a file to match a
-       wildcard.  The wildcard also means that it doesn't matter which
-       directory crtbegin.o is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .dtors :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .eh_frame :
-  {
-    KEEP (*(.eh_frame))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-
-  .gcc_except_table :
-  {
-    *(.gcc_except_table)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } >ram = 0
-  __ro_end = . ;
-
-  .data ALIGN(4) :
-  {
-    __data_start = ABSOLUTE(.);
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } >ram = 0xff
-
-  __data_end  =  . ;
-
-  .bss ALIGN(4) :
-  {
-   __bss_start = ABSOLUTE(.);
-   /* __bss_start__ = ABSOLUTE(.); */
-   *(.dynbss)
-   *(.gnu.linkonce.b*)
-   *(COMMON)
-   *(.bss*)
-   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-    __bss_end = ABSOLUTE(.);
-  __end__ = ABSOLUTE(.);
-  } > ram
-
-
-  __eheap_end = . ;
-
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  .stack 0x80000 : { _stack = .; *(.stack) }
-  /* These must appear regardless of  .  */
-}

dkarm-eabi/crtls/gp32_gpsdk.specs

@@ -1,8 +0,0 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T gp32_gpsdk.ld%s --gc-sections
-
-*startfile:
-gp32_gpsdk_crt0%O%s crti%O%s crtbegin%O%s
-

dkarm-eabi/crtls/gp32_gpsdk_crt0.s

@@ -1,246 +0,0 @@
-@****************************************************
-@*    gp32 crt0.S v1.0 by Jeff F                    *
-@****************************************************
-
-@ v1.0 - Original release
-@
-@ This file is released into the public domain for commercial
-@ or non-commercial usage with no restrictions placed upon it.
-
-    .TEXT
-
-@ Note: Normally it is the job of crt0.S to clear the BSS
-@ (Zero Initialized) section to 0x00, but in the case of
-@ the gp32 we do not have to do this because it is done
-@ by the gp32 bios after it loads the app.
-
-@ The official sdt dev kit uses 'Main ()' as the entry
-@ point. If you would rather use 'main ()' instead then
-@ comment out the next line.
-@
-@ You have to use 'main ()' at some point in your program
-@ if you want to do c++ code. GCC will do a call to constructor
-@ setup before executing 'main ()'. Using 'main ()' also increases
-@ your program size by ~5500 bytes.
-
-@ .equ __OfficialEntry, 1
-
-@ The official sdt dev kit initializes various things in init.o
-@ Crt0.S performs similar tasks for compatibility. If you don't
-@ wish to use the official libs, or those that are compatible,
-@ then you need to comment out the next line to prevent link errors.
-
- .equ __OfficialInits, 1
-
-
-    .GLOBAL     _start
-_start:
-        .ALIGN
-        .CODE 32
-
-    @ Start Vector
-
-        b       _GpInit
-
-        .word   __text_start    @ Start of text (Read Only) section
-_roe:   .word   __ro_end        @ End "
-_rws:   .word   __data_start    @ Start of data (Read/Write) section
-        .word   __bss_end       @ End of bss (this is the way sdt does it for some reason)
-_zis:   .word   __bss_start     @ Start of bss (Zero Initialized) section
-_zie:   .word   __bss_end       @ End "
-
-        .word   0x44450011
-        .word   0x44450011
-
-        .word   0x01234567
-        .word   0x12345678
-        .word   0x23456789
-        .word   0x34567890
-        .word   0x45678901
-        .word   0x56789012
-        .word   0x23456789
-        .word   0x34567890
-        .word   0x45678901
-        .word   0x56789012
-        .word   0x23456789
-        .word   0x34567890
-        .word   0x45678901
-        .word   0x56789012
-
-_GpInit:
-        mrs r0,CPSR
-        orr r0,r0,#0xc0
-        msr CPSR_fsxc,r0
-
-.ifdef __OfficialInits
-
-@ Call function in user_init.s
-@        bl  asm_user_entry
-
-@ Get pointer to GpSurfaceSet routine
-        mov r0,#0
-        swi 0xb
-        ldr r1,=GpSurfaceSet
-        ldr r2,=GpSurfaceFlip
-        str r0,[r1]
-        str r0,[r2]
-
-@ Get time passed
-        mov r0,#6
-        swi 0xb
-        ldr r1,=_timepassed
-        str r0,[r1]
-
-@ Get button stuff
-        mov r0,#0
-        swi 0x10
-        ldr r2,=_reg_io_key_a
-        ldr r3,=_reg_io_key_b
-        str r0,[r2]
-        str r1,[r3]
-
-@ Set heap start location
-        ldr r0,_zie
-        ldr r1,=HEAPSTART
-        str r0,[r1]
-
-@ Set heap end location
-        mov r0,#5
-        swi 0xb
-        ldr r1,=HEAPEND
-        sub r0,r0,#255
-        bic r0,r0,#3
-        str r0,[r1]
-
-@ Set App Argument
-        swi 0x15
-
-        mov r10,r0
-        mov r11,r1       @ possibly not needed but left in anyway
-
-        mrs r0,CPSR
-        bic r0,r0,#192
-        orr r0,r0,#64
-        msr CPSR_fsxc,r0
-
-        mov r0,r10
-        mov r1,r11       @ possibly not needed but left in anyway
-.endif
-
-@ Jump to Main ()
-
-.ifdef __OfficialEntry
-        ldr     r3,=Main
-.else
-        ldr     r3,=main
-.endif
-        bx  r3           @ Init.o uses 'mov pc,r3' but
-                         @ 'bx r3' is used here instead. This way
-                         @ the main function can be ARM or Thumb.
-
-.ifdef __OfficialInits
-
-    swi   0x12
-		orr		r1,r1,r2
-    and   r1,r1,r3
-		eor		r1,r1,r4
-		mov		r5,r1,lsr #4
-		add		r1,r1,r7
-    sub   r7,r7,r1
-		mov		r8,#0
-		mov		pc,r8
-    b   .
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		b		.
-		nop
-		nop
-		nop
-		nop
-		nop
-		nop
-
-        .GLOBAL _fw_init_for_dbg
-_fw_init_for_dbg:
-		stmdb	sp!,{r0-r12}
-
-		mov		r10,lr
-		mov		r11,sp
-
-    bic   r0,r0,#31      @ 0x1f
-    orr   r1,r0,#17      @ 0x11
-    orr   r2,r0,#19      @ 0x13
-		msr		cpsr_cxsf,r1
-		mov		r12,#4
-		add		r12,r12,pc
-		msr		cpsr_cxsf,r2
-    swi   0x1ff
-
-@		bl		asm_user_entry_path
-
-		mov		r0,r11
-		mov		r1,r10
-		add		r0,r0,#52
-		ldr		r2,[r0]
-		mov		lr,r1
-		stmdb	sp!,{r2}
-		stmdb	sp!,{r0-r12,lr}
-
-@ Copy RW Base - ZI Base
-    ldr   r0,=_roe         @ |Image$$RO$$Limit|
-    ldr   r3,=_zis         @ |Image$$ZI$$Base|
-    ldr   r2,=_rws         @ |Image$$RW$$Base|
-		sub	 	r3,r3,r2
-CopyRWData:
-		cmp	 	r3,#36
-    blt   CopyRWData2
-		ldmia	r0!,{r4-r12}
-		stmia	r2!,{r4-r12}
-		sub	 	r3,r3,#36
-		b		CopyRWData
-CopyRWData2:
-		cmp	 	r3,#0
-    ble   CopyRWData3
-		ldr	 	r4,[r0],#4
-		str	 	r4,[r2],#4
-		sub	 	r3,r3,#4
-    b   CopyRWData2
-CopyRWData3:
-
-@ Clear ZI section
-    ldr   r1,=_zie         @ |Image$$ZI$$Limit|
-    ldr   r0,=_zis         @ |Image$$ZI$$Base|
-		mov	 	r2,#0
-		mov	 	r3,r2
-		mov	 	r4,r2
-		mov	 	r5,r2
-		mov	 	r6,r2
-		mov	 	r7,r2
-		mov	 	r8,r2
-		mov	 	r9,r2
-		mov	 	r10,r2
-		mov	 	r11,r2
-		mov	 	r12,r2
-CopyZIData:
-		stmia	r0!,{r2-r12}
-		cmp	 	r0,r1
-		blt	 	CopyZIData
-
-		ldmia	sp!,{r0-r12,pc}
-
-.endif
-
-    .ALIGN
-    .POOL
-
-
-    .END
-

dkarm-eabi/patches/gcc-12.2.0.patch

@@ -0,0 +1,370 @@
+diff --git a/gcc/config.gcc b/gcc/config.gcc
+index c5064dd3766..b244608f001 100644
+--- a/gcc/config.gcc
++++ b/gcc/config.gcc
+@@ -1366,6 +1366,11 @@ arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
+ 	  tm_file="$tm_file newlib-stdint.h"
+ 	  tmake_file="${tmake_file} arm/t-bpabi"
+ 	  use_gcc_stdint=wrap
++	  tm_file="${tm_file} devkitpro.h"
++	  extra_options="${extra_options} devkitpro.opt"
++	  case ${enable_threads} in
++		"" | yes | posix) thread_file='posix' ;;
++	  esac
+ 	  ;;
+ 	arm*-*-fuchsia*)
+ 	  tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h"
+diff --git a/gcc/config/arm/arm-cpus.in b/gcc/config/arm/arm-cpus.in
+index 0d3082b569f..15be7fc47b3 100644
+--- a/gcc/config/arm/arm-cpus.in
++++ b/gcc/config/arm/arm-cpus.in
+@@ -412,7 +412,7 @@ begin arch armv6k
+  tune for mpcore
+  tune flags CO_PROC
+  base 6K
+- isa ARMv6k
++ isa ARMv6k VFPv2 FP_DBL
+  option fp add VFPv2 FP_DBL
+  optalias vfpv2 fp
+  option nofp remove ALL_FP
+diff --git a/gcc/config/arm/t-arm-elf b/gcc/config/arm/t-arm-elf
+index 1459afea921..72e1d20861d 100644
+--- a/gcc/config/arm/t-arm-elf
++++ b/gcc/config/arm/t-arm-elf
+@@ -16,120 +16,22 @@
+ # along with GCC; see the file COPYING3.  If not see
+ # <http://www.gnu.org/licenses/>.
+ 
+-# Build a very basic set of libraries that should cater for most cases.
+-
+-# Single-precision floating-point is NOT supported; we don't build a
+-# suitable library for that.  Use the rm-profile config in that case.
+-
+-# PART 1 - Useful groups of options
+-
+-dp_fpus		:= vfp vfpv2 vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16 \
+-		   neon neon-vfpv3 neon-fp16 vfpv4 neon-vfpv4 vfpv4-d16 \
+-		   fpv5-d16 fp-armv8 neon-fp-armv8 crypto-neon-fp-armv8 \
+-		   vfp3
+-
+-sp_fpus		:= vfpv3xd vfpv3xd-fp16  fpv4-sp-d16 fpv5-sp-d16
+-
+-v7a_fps		:= vfpv3 vfpv3-fp16 vfpv4 simd neon-fp16 neon-vfpv4
+-v7ve_fps	:= vfpv3-d16 vfpv3 vfpv3-d16-fp16 vfpv3-fp16 vfpv4 neon \
+-		   neon-fp16 simd
+-
+-# Not all these permutations exist for all architecture variants, but
+-# it seems to work ok.
+-v8_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-v9_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-# We don't do anything special with these.  Pre-v4t probably doesn't work.
+-all_early_nofp	:= armv4 armv4t armv5t
+-
+-all_early_arch	:= armv5tej armv6 armv6j armv6k armv6z armv6kz \
+-		   armv6zk armv6t2 iwmmxt iwmmxt2
+-
+-all_v7_a_r	:= armv7-a armv7ve armv7-r
+-
+-all_v8_archs	:= armv8-a armv8-a+crc armv8.1-a armv8.2-a armv8.3-a armv8.4-a \
+-		   armv8.5-a armv8.6-a
+-
+-all_v9_archs	:= armv9-a
+-
+-# No floating point variants, require thumb1 softfp
+-all_nofp_t	:= armv6-m armv6s-m armv8-m.base
+-
+-all_nofp_t2	:= armv7-m
+-
+-all_sp_only	:= armv7e-m armv8-m.main
+-
+-MULTILIB_OPTIONS     =
+-MULTILIB_DIRNAMES    =
++MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k march=armv6s-m mfloat-abi=hard mfloat-abi=soft
++MULTILIB_DIRNAMES    = thumb be armv6k v6-m fpu nofp
+ MULTILIB_EXCEPTIONS  = 
+ MULTILIB_MATCHES     =
+-MULTILIB_REUSE	     =
+-
+-# PART 2 - multilib build rules
+-
+-MULTILIB_OPTIONS     += marm/mthumb
+-MULTILIB_DIRNAMES    += arm thumb
+-
+-MULTILIB_OPTIONS     += mfpu=auto
+-MULTILIB_DIRNAMES    += autofp
+-
+-MULTILIB_OPTIONS     += march=armv5te+fp/march=armv7+fp
+-MULTILIB_DIRNAMES    += v5te v7
+-
+-MULTILIB_OPTIONS     += mfloat-abi=hard
+-MULTILIB_DIRNAMES    += fpu
+-
+-# Build a total of 4 library variants (base options plus the following):
+-MULTILIB_REQUIRED    += mthumb
+-MULTILIB_REQUIRED    += marm/mfpu=auto/march=armv5te+fp/mfloat-abi=hard
+-MULTILIB_REQUIRED    += mthumb/mfpu=auto/march=armv7+fp/mfloat-abi=hard
+-
+-# PART 3 - Match rules
+-
+-# Map all supported FPUs onto mfpu=auto
+-MULTILIB_MATCHES     += $(foreach FPU, $(dp_fpus), \
+-			  mfpu?auto=mfpu?$(FPU))
+-
+-MULTILIB_MATCHES     += march?armv5te+fp=march?armv5te
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_early_arch), \
+-		          march?armv5te+fp=march?$(ARCH) \
+-			  march?armv5te+fp=march?$(ARCH)+fp)
+-
+-MULTILIB_MATCHES     += march?armv7+fp=march?armv7
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7a_fps), \
+-		          march?armv7+fp=march?armv7-a+$(FPARCH))
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7ve_fps), \
+-		          march?armv7+fp=march?armv7ve+$(FPARCH))
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v7_a_r), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  march?armv7+fp=march?$(ARCH)+fp)
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v8_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v8_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
++MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard mthumb/march=armv6s-m/mfloat-abi=soft
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v9_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v9_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, armv7e-m armv8-m.mainline, \
+-			  march?armv7+fp=march?$(ARCH)+fp.dp)
++MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
++MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
+ 
+-# PART 4 - Reuse rules
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m0
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m0
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m0plus
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m0plus
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m1
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m1
+ 
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto/march.armv5te+fp
+-MULTILIB_REUSE	     += mthumb=mthumb/march.armv5te+fp
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=marm/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=mfpu.auto/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mthumb/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mfpu.auto/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=march.armv7+fp/mfloat-abi.hard
++MULTILIB_REUSE       = mthumb/march.armv6s-m/mfloat-abi.soft=mthumb/march.armv6s-m
+diff --git a/gcc/config/arm/unknown-elf.h b/gcc/config/arm/unknown-elf.h
+index bfb294beaa3..7e2e1c7bbbe 100644
+--- a/gcc/config/arm/unknown-elf.h
++++ b/gcc/config/arm/unknown-elf.h
+@@ -29,7 +29,7 @@
+ #endif
+ 
+ /* Now we define the strings used to build the spec file.  */
+-#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
++#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
+ 
+ #undef  STARTFILE_SPEC
+ #define STARTFILE_SPEC	\
+@@ -93,4 +93,5 @@
+    udivmoddi4, which will depend on the exception unwind routines,
+    which will depend on abort, which is defined in libc.  */ 
+ #undef LINK_GCC_C_SEQUENCE_SPEC
+-#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %{!nolibc:%L} --end-group"
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
++
+diff --git a/gcc/config/devkitpro.h b/gcc/config/devkitpro.h
+new file mode 100644
+index 00000000000..180a9ea8553
+--- /dev/null
++++ b/gcc/config/devkitpro.h
+@@ -0,0 +1,27 @@
++/* Definitions for devkitPro toolchains.
++   Copyright (C) 2016-2018 Free Software Foundation, Inc.
++   This file is part of GCC.
++   GCC is free software; you can redistribute it and/or modify it
++   under the terms of the GNU General Public License as published
++   by the Free Software Foundation; either version 3, or (at your
++   option) any later version.
++   GCC is distributed in the hope that it will be useful, but WITHOUT
++   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
++   License for more details.
++   Under Section 7 of GPL version 3, you are granted additional
++   permissions described in the GCC Runtime Library Exception, version
++   3.1, as published by the Free Software Foundation.
++   You should have received a copy of the GNU General Public License and
++   a copy of the GCC Runtime Library Exception along with this program;
++   see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++   <http://www.gnu.org/licenses/>.  */
++
++#undef TARGET_OS_CPP_BUILTINS
++#define TARGET_OS_CPP_BUILTINS()                \
++    do {                                        \
++        builtin_define ("__DEVKITPRO__");       \
++        builtin_define ("__DEVKITARM__");       \
++    } while (0)
++
++
+diff --git a/gcc/config/devkitpro.opt b/gcc/config/devkitpro.opt
+new file mode 100644
+index 00000000000..9acbbf9d27c
+--- /dev/null
++++ b/gcc/config/devkitpro.opt
+@@ -0,0 +1,29 @@
++; Options for devkitPro toolchains.
++
++; Copyright (C) 2011-2018 Free Software Foundation, Inc.
++;
++; This file is part of GCC.
++;
++; GCC is free software; you can redistribute it and/or modify it under
++; the terms of the GNU General Public License as published by the Free
++; Software Foundation; either version 3, or (at your option) any later
++; version.
++;
++; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++; WARRANTY; without even the implied warranty of MERCHANTABILITY or
++; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++; for more details.
++;
++; You should have received a copy of the GNU General Public License
++; along with GCC; see the file COPYING3.  If not see
++; <http://www.gnu.org/licenses/>.
++
++; See the GCC internals manual (options.texi) for a description of
++; this file's format.
++
++; Please try to keep this file in ASCII collating order.
++
++pthread
++Driver
++
++; This comment is to ensure we retain the blank line above.
+diff --git a/gcc/config/i386/host-mingw32.cc b/gcc/config/i386/host-mingw32.cc
+index 3b0d83ffc60..6e063b6ccd0 100644
+--- a/gcc/config/i386/host-mingw32.cc
++++ b/gcc/config/i386/host-mingw32.cc
+@@ -45,7 +45,11 @@ static size_t mingw32_gt_pch_alloc_granularity (void);
+ static inline void w32_error(const char*, const char*, int, const char*);
+ 
+ /* FIXME: Is this big enough?  */
++#if __MINGW64__
++static const size_t pch_VA_max_size  = UINT64_C(64 * 1024 * 1024 * 1024);
++#else
+ static const size_t pch_VA_max_size  = 128 * 1024 * 1024;
++#endif
+ 
+ /* Granularity for reserving address space.  */
+ static size_t va_granularity = 0x10000;
+diff --git a/gcc/gcc.cc b/gcc/gcc.cc
+index bb07cc244e3..eff31f5093d 100644
+--- a/gcc/gcc.cc
++++ b/gcc/gcc.cc
+@@ -860,6 +860,11 @@ proper position among the other output files.  */
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1204,6 +1209,7 @@ static const char *link_spec = LINK_SPEC;
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1709,6 +1715,7 @@ static struct spec_list static_specs[] =
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff --git a/libgcc/config/arm/t-bpabi b/libgcc/config/arm/t-bpabi
+index dddddc7c444..c2502597953 100644
+--- a/libgcc/config/arm/t-bpabi
++++ b/libgcc/config/arm/t-bpabi
+@@ -17,4 +17,4 @@ SHLIB_MAPFILES += $(srcdir)/config/arm/libgcc-bpabi.ver
+ # On ARM, specifying -fnon-call-exceptions will needlessly pull in
+ # the unwinder in simple programs which use 64-bit division.  Omitting
+ # the option is safe.
+-LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
++LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index b98b86a5a88..3f62b3616d2 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -325,7 +325,7 @@ register_tm_clones (void)
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance
+diff --git a/libgcc/gthr.h b/libgcc/gthr.h
+index 7943c94f6d1..1edc5360f6a 100644
+--- a/libgcc/gthr.h
++++ b/libgcc/gthr.h
+@@ -136,7 +136,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ /* The pe-coff weak support isn't fully compatible to ELF's weak.
+    For static libraries it might would work, but as we need to deal
+    with shared versions too, we disable it for mingw-targets.  */
+-#ifdef __MINGW32__
++#ifdef __MINGW32__ || defined(__DEVKITARM__)
+ #undef GTHREAD_USE_WEAK
+ #define GTHREAD_USE_WEAK 0
+ #endif
+diff --git a/libstdc++-v3/include/Makefile.am b/libstdc++-v3/include/Makefile.am
+index 7708f4cf6c5..01743392303 100644
+--- a/libstdc++-v3/include/Makefile.am
++++ b/libstdc++-v3/include/Makefile.am
+@@ -1366,6 +1366,7 @@ ${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITARM_GLIBCXX___/__DEVKITARM__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 
+diff --git a/libstdc++-v3/include/Makefile.in b/libstdc++-v3/include/Makefile.in
+index 7023c2de23e..33bec80c2ce 100644
+--- a/libstdc++-v3/include/Makefile.in
++++ b/libstdc++-v3/include/Makefile.in
+@@ -336,6 +336,7 @@ prefix = @prefix@
+ program_transform_name = @program_transform_name@
+ psdir = @psdir@
+ python_mod_dir = @python_mod_dir@
++runstatedir = @runstatedir@
+ sbindir = @sbindir@
+ sharedstatedir = @sharedstatedir@
+ srcdir = @srcdir@
+@@ -1857,6 +1858,7 @@ ${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITARM_GLIBCXX___/__DEVKITARM__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 

dkarm-eabi/patches/gcc-13.1.0-RC2-20230419.patch

@@ -0,0 +1,340 @@
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/gcc/config/arm/arm-cpus.in gcc-13.1.0-RC2-20230419/gcc/config/arm/arm-cpus.in
+--- gcc-13.1.0-RC2-20230419.orig/gcc/config/arm/arm-cpus.in	2023-04-19 13:53:45.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/gcc/config/arm/arm-cpus.in	2023-04-26 21:53:20.092320569 +0100
+@@ -416,7 +416,7 @@
+  tune for mpcore
+  tune flags CO_PROC
+  base 6K
+- isa ARMv6k
++ isa ARMv6k VFPv2 FP_DBL
+  option fp add VFPv2 FP_DBL
+  optalias vfpv2 fp
+  option nofp remove ALL_FP
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/gcc/config/arm/t-arm-elf gcc-13.1.0-RC2-20230419/gcc/config/arm/t-arm-elf
+--- gcc-13.1.0-RC2-20230419.orig/gcc/config/arm/t-arm-elf	2023-04-19 13:53:45.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/gcc/config/arm/t-arm-elf	2023-04-26 21:53:20.092320569 +0100
+@@ -16,120 +16,22 @@
+ # along with GCC; see the file COPYING3.  If not see
+ # <http://www.gnu.org/licenses/>.
+ 
+-# Build a very basic set of libraries that should cater for most cases.
+-
+-# Single-precision floating-point is NOT supported; we don't build a
+-# suitable library for that.  Use the rm-profile config in that case.
+-
+-# PART 1 - Useful groups of options
+-
+-dp_fpus		:= vfp vfpv2 vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16 \
+-		   neon neon-vfpv3 neon-fp16 vfpv4 neon-vfpv4 vfpv4-d16 \
+-		   fpv5-d16 fp-armv8 neon-fp-armv8 crypto-neon-fp-armv8 \
+-		   vfp3
+-
+-sp_fpus		:= vfpv3xd vfpv3xd-fp16  fpv4-sp-d16 fpv5-sp-d16
+-
+-v7a_fps		:= vfpv3 vfpv3-fp16 vfpv4 simd neon-fp16 neon-vfpv4
+-v7ve_fps	:= vfpv3-d16 vfpv3 vfpv3-d16-fp16 vfpv3-fp16 vfpv4 neon \
+-		   neon-fp16 simd
+-
+-# Not all these permutations exist for all architecture variants, but
+-# it seems to work ok.
+-v8_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-v9_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-# We don't do anything special with these.  Pre-v4t probably doesn't work.
+-all_early_nofp	:= armv4 armv4t armv5t
+-
+-all_early_arch	:= armv5tej armv6 armv6j armv6k armv6z armv6kz \
+-		   armv6zk armv6t2 iwmmxt iwmmxt2
+-
+-all_v7_a_r	:= armv7-a armv7ve armv7-r
+-
+-all_v8_archs	:= armv8-a armv8-a+crc armv8.1-a armv8.2-a armv8.3-a armv8.4-a \
+-		   armv8.5-a armv8.6-a
+-
+-all_v9_archs	:= armv9-a
+-
+-# No floating point variants, require thumb1 softfp
+-all_nofp_t	:= armv6-m armv6s-m armv8-m.base
+-
+-all_nofp_t2	:= armv7-m
+-
+-all_sp_only	:= armv7e-m armv8-m.main
+-
+-MULTILIB_OPTIONS     =
+-MULTILIB_DIRNAMES    =
++MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k march=armv6s-m mfloat-abi=hard mfloat-abi=soft
++MULTILIB_DIRNAMES    = thumb be armv6k v6-m fpu nofp
+ MULTILIB_EXCEPTIONS  = 
+ MULTILIB_MATCHES     =
+-MULTILIB_REUSE	     =
+-
+-# PART 2 - multilib build rules
+-
+-MULTILIB_OPTIONS     += marm/mthumb
+-MULTILIB_DIRNAMES    += arm thumb
+-
+-MULTILIB_OPTIONS     += mfpu=auto
+-MULTILIB_DIRNAMES    += autofp
+-
+-MULTILIB_OPTIONS     += march=armv5te+fp/march=armv7+fp
+-MULTILIB_DIRNAMES    += v5te v7
+-
+-MULTILIB_OPTIONS     += mfloat-abi=hard
+-MULTILIB_DIRNAMES    += fpu
+-
+-# Build a total of 4 library variants (base options plus the following):
+-MULTILIB_REQUIRED    += mthumb
+-MULTILIB_REQUIRED    += marm/mfpu=auto/march=armv5te+fp/mfloat-abi=hard
+-MULTILIB_REQUIRED    += mthumb/mfpu=auto/march=armv7+fp/mfloat-abi=hard
+-
+-# PART 3 - Match rules
+-
+-# Map all supported FPUs onto mfpu=auto
+-MULTILIB_MATCHES     += $(foreach FPU, $(dp_fpus), \
+-			  mfpu?auto=mfpu?$(FPU))
+-
+-MULTILIB_MATCHES     += march?armv5te+fp=march?armv5te
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_early_arch), \
+-		          march?armv5te+fp=march?$(ARCH) \
+-			  march?armv5te+fp=march?$(ARCH)+fp)
+-
+-MULTILIB_MATCHES     += march?armv7+fp=march?armv7
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7a_fps), \
+-		          march?armv7+fp=march?armv7-a+$(FPARCH))
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7ve_fps), \
+-		          march?armv7+fp=march?armv7ve+$(FPARCH))
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v7_a_r), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  march?armv7+fp=march?$(ARCH)+fp)
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v8_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v8_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
++MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard mthumb/march=armv6s-m/mfloat-abi=soft
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v9_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v9_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, armv7e-m armv8-m.mainline, \
+-			  march?armv7+fp=march?$(ARCH)+fp.dp)
++MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
++MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
+ 
+-# PART 4 - Reuse rules
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m0
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m0
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m0plus
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m0plus
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m1
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m1
+ 
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto/march.armv5te+fp
+-MULTILIB_REUSE	     += mthumb=mthumb/march.armv5te+fp
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=marm/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=mfpu.auto/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mthumb/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mfpu.auto/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=march.armv7+fp/mfloat-abi.hard
++MULTILIB_REUSE       = mthumb/march.armv6s-m/mfloat-abi.soft=mthumb/march.armv6s-m
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/gcc/config/arm/unknown-elf.h gcc-13.1.0-RC2-20230419/gcc/config/arm/unknown-elf.h
+--- gcc-13.1.0-RC2-20230419.orig/gcc/config/arm/unknown-elf.h	2023-04-19 13:53:45.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/gcc/config/arm/unknown-elf.h	2023-04-26 21:53:20.092320569 +0100
+@@ -29,7 +29,7 @@
+ #endif
+ 
+ /* Now we define the strings used to build the spec file.  */
+-#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
++#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
+ 
+ #undef  STARTFILE_SPEC
+ #define STARTFILE_SPEC	\
+@@ -93,4 +93,5 @@
+    udivmoddi4, which will depend on the exception unwind routines,
+    which will depend on abort, which is defined in libc.  */ 
+ #undef LINK_GCC_C_SEQUENCE_SPEC
+-#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %{!nolibc:%L} --end-group"
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
++
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/gcc/config/devkitpro.h gcc-13.1.0-RC2-20230419/gcc/config/devkitpro.h
+--- gcc-13.1.0-RC2-20230419.orig/gcc/config/devkitpro.h	1970-01-01 01:00:00.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/gcc/config/devkitpro.h	2023-04-26 21:53:20.092320569 +0100
+@@ -0,0 +1,27 @@
++/* Definitions for devkitPro toolchains.
++   Copyright (C) 2016-2018 Free Software Foundation, Inc.
++   This file is part of GCC.
++   GCC is free software; you can redistribute it and/or modify it
++   under the terms of the GNU General Public License as published
++   by the Free Software Foundation; either version 3, or (at your
++   option) any later version.
++   GCC is distributed in the hope that it will be useful, but WITHOUT
++   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
++   License for more details.
++   Under Section 7 of GPL version 3, you are granted additional
++   permissions described in the GCC Runtime Library Exception, version
++   3.1, as published by the Free Software Foundation.
++   You should have received a copy of the GNU General Public License and
++   a copy of the GCC Runtime Library Exception along with this program;
++   see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++   <http://www.gnu.org/licenses/>.  */
++
++#undef TARGET_OS_CPP_BUILTINS
++#define TARGET_OS_CPP_BUILTINS()                \
++    do {                                        \
++        builtin_define ("__DEVKITPRO__");       \
++        builtin_define ("__DEVKITARM__");       \
++    } while (0)
++
++
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/gcc/config/devkitpro.opt gcc-13.1.0-RC2-20230419/gcc/config/devkitpro.opt
+--- gcc-13.1.0-RC2-20230419.orig/gcc/config/devkitpro.opt	1970-01-01 01:00:00.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/gcc/config/devkitpro.opt	2023-04-26 21:53:20.092320569 +0100
+@@ -0,0 +1,29 @@
++; Options for devkitPro toolchains.
++
++; Copyright (C) 2011-2018 Free Software Foundation, Inc.
++;
++; This file is part of GCC.
++;
++; GCC is free software; you can redistribute it and/or modify it under
++; the terms of the GNU General Public License as published by the Free
++; Software Foundation; either version 3, or (at your option) any later
++; version.
++;
++; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++; WARRANTY; without even the implied warranty of MERCHANTABILITY or
++; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++; for more details.
++;
++; You should have received a copy of the GNU General Public License
++; along with GCC; see the file COPYING3.  If not see
++; <http://www.gnu.org/licenses/>.
++
++; See the GCC internals manual (options.texi) for a description of
++; this file's format.
++
++; Please try to keep this file in ASCII collating order.
++
++pthread
++Driver
++
++; This comment is to ensure we retain the blank line above.
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/gcc/config.gcc gcc-13.1.0-RC2-20230419/gcc/config.gcc
+--- gcc-13.1.0-RC2-20230419.orig/gcc/config.gcc	2023-04-19 13:53:45.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/gcc/config.gcc	2023-04-26 21:53:20.092320569 +0100
+@@ -1412,6 +1412,11 @@
+ 	  tm_file="$tm_file newlib-stdint.h"
+ 	  tmake_file="${tmake_file} arm/t-bpabi"
+ 	  use_gcc_stdint=wrap
++	  tm_file="${tm_file} devkitpro.h"
++	  extra_options="${extra_options} devkitpro.opt"
++	  case ${enable_threads} in
++		"" | yes | posix) thread_file='posix' ;;
++	  esac
+ 	  ;;
+ 	arm*-*-fuchsia*)
+ 	  tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h"
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/gcc/gcc.cc gcc-13.1.0-RC2-20230419/gcc/gcc.cc
+--- gcc-13.1.0-RC2-20230419.orig/gcc/gcc.cc	2023-04-19 13:53:46.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/gcc/gcc.cc	2023-04-26 21:53:20.092320569 +0100
+@@ -868,6 +868,11 @@
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1191,6 +1196,7 @@
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1701,6 +1707,7 @@
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/libgcc/config/arm/t-bpabi gcc-13.1.0-RC2-20230419/libgcc/config/arm/t-bpabi
+--- gcc-13.1.0-RC2-20230419.orig/libgcc/config/arm/t-bpabi	2023-04-19 13:53:49.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/libgcc/config/arm/t-bpabi	2023-04-26 21:53:20.092320569 +0100
+@@ -17,4 +17,4 @@
+ # On ARM, specifying -fnon-call-exceptions will needlessly pull in
+ # the unwinder in simple programs which use 64-bit division.  Omitting
+ # the option is safe.
+-LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
++LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/libgcc/crtstuff.c gcc-13.1.0-RC2-20230419/libgcc/crtstuff.c
+--- gcc-13.1.0-RC2-20230419.orig/libgcc/crtstuff.c	2023-04-19 13:53:49.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/libgcc/crtstuff.c	2023-04-26 21:53:20.092320569 +0100
+@@ -326,7 +326,7 @@
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/libgcc/gthr.h gcc-13.1.0-RC2-20230419/libgcc/gthr.h
+--- gcc-13.1.0-RC2-20230419.orig/libgcc/gthr.h	2023-04-19 13:53:49.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/libgcc/gthr.h	2023-04-26 21:53:20.092320569 +0100
+@@ -136,7 +136,7 @@
+ /* The pe-coff weak support isn't fully compatible to ELF's weak.
+    For static libraries it might would work, but as we need to deal
+    with shared versions too, we disable it for mingw-targets.  */
+-#ifdef __MINGW32__
++#ifdef __MINGW32__ || defined(__DEVKITARM__)
+ #undef GTHREAD_USE_WEAK
+ #define GTHREAD_USE_WEAK 0
+ #endif
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/libstdc++-v3/include/Makefile.am gcc-13.1.0-RC2-20230419/libstdc++-v3/include/Makefile.am
+--- gcc-13.1.0-RC2-20230419.orig/libstdc++-v3/include/Makefile.am	2023-04-19 13:53:50.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/libstdc++-v3/include/Makefile.am	2023-04-26 21:53:20.092320569 +0100
+@@ -1417,6 +1417,7 @@
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITARM_GLIBCXX___/__DEVKITARM__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 
+diff -NBaur gcc-13.1.0-RC2-20230419.orig/libstdc++-v3/include/Makefile.in gcc-13.1.0-RC2-20230419/libstdc++-v3/include/Makefile.in
+--- gcc-13.1.0-RC2-20230419.orig/libstdc++-v3/include/Makefile.in	2023-04-19 13:53:50.000000000 +0100
++++ gcc-13.1.0-RC2-20230419/libstdc++-v3/include/Makefile.in	2023-04-26 21:53:20.092320569 +0100
+@@ -336,6 +336,7 @@
+ program_transform_name = @program_transform_name@
+ psdir = @psdir@
+ python_mod_dir = @python_mod_dir@
++runstatedir = @runstatedir@
+ sbindir = @sbindir@
+ sharedstatedir = @sharedstatedir@
+ srcdir = @srcdir@
+@@ -1891,6 +1892,7 @@
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITARM_GLIBCXX___/__DEVKITARM__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 

dkarm-eabi/patches/gcc-13.1.0.patch

@@ -0,0 +1,354 @@
+diff --git a/gcc/config.gcc b/gcc/config.gcc
+index 6fd1594480a..92b82426f50 100644
+--- a/gcc/config.gcc
++++ b/gcc/config.gcc
+@@ -1412,6 +1412,11 @@ arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
+ 	  tm_file="$tm_file newlib-stdint.h"
+ 	  tmake_file="${tmake_file} arm/t-bpabi"
+ 	  use_gcc_stdint=wrap
++	  tm_file="${tm_file} devkitpro.h"
++	  extra_options="${extra_options} devkitpro.opt"
++	  case ${enable_threads} in
++		"" | yes | posix) thread_file='posix' ;;
++	  esac
+ 	  ;;
+ 	arm*-*-fuchsia*)
+ 	  tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h"
+diff --git a/gcc/config/arm/arm-cpus.in b/gcc/config/arm/arm-cpus.in
+index f1fa3fa174c..2bb894b5b2d 100644
+--- a/gcc/config/arm/arm-cpus.in
++++ b/gcc/config/arm/arm-cpus.in
+@@ -416,7 +416,7 @@ begin arch armv6k
+  tune for mpcore
+  tune flags CO_PROC
+  base 6K
+- isa ARMv6k
++ isa ARMv6k VFPv2 FP_DBL
+  option fp add VFPv2 FP_DBL
+  optalias vfpv2 fp
+  option nofp remove ALL_FP
+diff --git a/gcc/config/arm/t-arm-elf b/gcc/config/arm/t-arm-elf
+index f7fc1460d1c..055f9d62385 100644
+--- a/gcc/config/arm/t-arm-elf
++++ b/gcc/config/arm/t-arm-elf
+@@ -16,120 +16,22 @@
+ # along with GCC; see the file COPYING3.  If not see
+ # <http://www.gnu.org/licenses/>.
+ 
+-# Build a very basic set of libraries that should cater for most cases.
+-
+-# Single-precision floating-point is NOT supported; we don't build a
+-# suitable library for that.  Use the rm-profile config in that case.
+-
+-# PART 1 - Useful groups of options
+-
+-dp_fpus		:= vfp vfpv2 vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16 \
+-		   neon neon-vfpv3 neon-fp16 vfpv4 neon-vfpv4 vfpv4-d16 \
+-		   fpv5-d16 fp-armv8 neon-fp-armv8 crypto-neon-fp-armv8 \
+-		   vfp3
+-
+-sp_fpus		:= vfpv3xd vfpv3xd-fp16  fpv4-sp-d16 fpv5-sp-d16
+-
+-v7a_fps		:= vfpv3 vfpv3-fp16 vfpv4 simd neon-fp16 neon-vfpv4
+-v7ve_fps	:= vfpv3-d16 vfpv3 vfpv3-d16-fp16 vfpv3-fp16 vfpv4 neon \
+-		   neon-fp16 simd
+-
+-# Not all these permutations exist for all architecture variants, but
+-# it seems to work ok.
+-v8_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-v9_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-# We don't do anything special with these.  Pre-v4t probably doesn't work.
+-all_early_nofp	:= armv4 armv4t armv5t
+-
+-all_early_arch	:= armv5tej armv6 armv6j armv6k armv6z armv6kz \
+-		   armv6zk armv6t2 iwmmxt iwmmxt2
+-
+-all_v7_a_r	:= armv7-a armv7ve armv7-r
+-
+-all_v8_archs	:= armv8-a armv8-a+crc armv8.1-a armv8.2-a armv8.3-a armv8.4-a \
+-		   armv8.5-a armv8.6-a
+-
+-all_v9_archs	:= armv9-a
+-
+-# No floating point variants, require thumb1 softfp
+-all_nofp_t	:= armv6-m armv6s-m armv8-m.base
+-
+-all_nofp_t2	:= armv7-m
+-
+-all_sp_only	:= armv7e-m armv8-m.main
+-
+-MULTILIB_OPTIONS     =
+-MULTILIB_DIRNAMES    =
++MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k march=armv6s-m mfloat-abi=hard mfloat-abi=soft
++MULTILIB_DIRNAMES    = thumb be armv6k v6-m fpu nofp
+ MULTILIB_EXCEPTIONS  = 
+ MULTILIB_MATCHES     =
+-MULTILIB_REUSE	     =
+-
+-# PART 2 - multilib build rules
+-
+-MULTILIB_OPTIONS     += marm/mthumb
+-MULTILIB_DIRNAMES    += arm thumb
+-
+-MULTILIB_OPTIONS     += mfpu=auto
+-MULTILIB_DIRNAMES    += autofp
+-
+-MULTILIB_OPTIONS     += march=armv5te+fp/march=armv7+fp
+-MULTILIB_DIRNAMES    += v5te v7
+-
+-MULTILIB_OPTIONS     += mfloat-abi=hard
+-MULTILIB_DIRNAMES    += fpu
+-
+-# Build a total of 4 library variants (base options plus the following):
+-MULTILIB_REQUIRED    += mthumb
+-MULTILIB_REQUIRED    += marm/mfpu=auto/march=armv5te+fp/mfloat-abi=hard
+-MULTILIB_REQUIRED    += mthumb/mfpu=auto/march=armv7+fp/mfloat-abi=hard
+-
+-# PART 3 - Match rules
+-
+-# Map all supported FPUs onto mfpu=auto
+-MULTILIB_MATCHES     += $(foreach FPU, $(dp_fpus), \
+-			  mfpu?auto=mfpu?$(FPU))
+-
+-MULTILIB_MATCHES     += march?armv5te+fp=march?armv5te
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_early_arch), \
+-		          march?armv5te+fp=march?$(ARCH) \
+-			  march?armv5te+fp=march?$(ARCH)+fp)
+-
+-MULTILIB_MATCHES     += march?armv7+fp=march?armv7
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7a_fps), \
+-		          march?armv7+fp=march?armv7-a+$(FPARCH))
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7ve_fps), \
+-		          march?armv7+fp=march?armv7ve+$(FPARCH))
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v7_a_r), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  march?armv7+fp=march?$(ARCH)+fp)
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v8_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v8_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
++MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard mthumb/march=armv6s-m/mfloat-abi=soft
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v9_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v9_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, armv7e-m armv8-m.mainline, \
+-			  march?armv7+fp=march?$(ARCH)+fp.dp)
++MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
++MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
+ 
+-# PART 4 - Reuse rules
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m0
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m0
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m0plus
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m0plus
++MULTILIB_MATCHES    += march?armv6s-m=mcpu?cortex-m1
++MULTILIB_MATCHES    += march?armv6s-m=mtune?cortex-m1
+ 
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto/march.armv5te+fp
+-MULTILIB_REUSE	     += mthumb=mthumb/march.armv5te+fp
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=marm/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=mfpu.auto/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mthumb/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mfpu.auto/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=march.armv7+fp/mfloat-abi.hard
++MULTILIB_REUSE       = mthumb/march.armv6s-m/mfloat-abi.soft=mthumb/march.armv6s-m
+diff --git a/gcc/config/arm/unknown-elf.h b/gcc/config/arm/unknown-elf.h
+index 397ac3f68b9..b9a388f19be 100644
+--- a/gcc/config/arm/unknown-elf.h
++++ b/gcc/config/arm/unknown-elf.h
+@@ -29,7 +29,7 @@
+ #endif
+ 
+ /* Now we define the strings used to build the spec file.  */
+-#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
++#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
+ 
+ #undef  STARTFILE_SPEC
+ #define STARTFILE_SPEC	\
+@@ -93,4 +93,5 @@
+    udivmoddi4, which will depend on the exception unwind routines,
+    which will depend on abort, which is defined in libc.  */ 
+ #undef LINK_GCC_C_SEQUENCE_SPEC
+-#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %{!nolibc:%L} --end-group"
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
++
+diff --git a/gcc/config/devkitpro.h b/gcc/config/devkitpro.h
+new file mode 100644
+index 00000000000..180a9ea8553
+--- /dev/null
++++ b/gcc/config/devkitpro.h
+@@ -0,0 +1,27 @@
++/* Definitions for devkitPro toolchains.
++   Copyright (C) 2016-2018 Free Software Foundation, Inc.
++   This file is part of GCC.
++   GCC is free software; you can redistribute it and/or modify it
++   under the terms of the GNU General Public License as published
++   by the Free Software Foundation; either version 3, or (at your
++   option) any later version.
++   GCC is distributed in the hope that it will be useful, but WITHOUT
++   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
++   License for more details.
++   Under Section 7 of GPL version 3, you are granted additional
++   permissions described in the GCC Runtime Library Exception, version
++   3.1, as published by the Free Software Foundation.
++   You should have received a copy of the GNU General Public License and
++   a copy of the GCC Runtime Library Exception along with this program;
++   see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++   <http://www.gnu.org/licenses/>.  */
++
++#undef TARGET_OS_CPP_BUILTINS
++#define TARGET_OS_CPP_BUILTINS()                \
++    do {                                        \
++        builtin_define ("__DEVKITPRO__");       \
++        builtin_define ("__DEVKITARM__");       \
++    } while (0)
++
++
+diff --git a/gcc/config/devkitpro.opt b/gcc/config/devkitpro.opt
+new file mode 100644
+index 00000000000..9acbbf9d27c
+--- /dev/null
++++ b/gcc/config/devkitpro.opt
+@@ -0,0 +1,29 @@
++; Options for devkitPro toolchains.
++
++; Copyright (C) 2011-2018 Free Software Foundation, Inc.
++;
++; This file is part of GCC.
++;
++; GCC is free software; you can redistribute it and/or modify it under
++; the terms of the GNU General Public License as published by the Free
++; Software Foundation; either version 3, or (at your option) any later
++; version.
++;
++; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++; WARRANTY; without even the implied warranty of MERCHANTABILITY or
++; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++; for more details.
++;
++; You should have received a copy of the GNU General Public License
++; along with GCC; see the file COPYING3.  If not see
++; <http://www.gnu.org/licenses/>.
++
++; See the GCC internals manual (options.texi) for a description of
++; this file's format.
++
++; Please try to keep this file in ASCII collating order.
++
++pthread
++Driver
++
++; This comment is to ensure we retain the blank line above.
+diff --git a/gcc/gcc.cc b/gcc/gcc.cc
+index 16bb07f2cdc..22a181a3a1c 100644
+--- a/gcc/gcc.cc
++++ b/gcc/gcc.cc
+@@ -868,6 +868,11 @@ proper position among the other output files.  */
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1191,6 +1196,7 @@ static const char *link_spec = LINK_SPEC;
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1701,6 +1707,7 @@ static struct spec_list static_specs[] =
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff --git a/libgcc/config/arm/t-bpabi b/libgcc/config/arm/t-bpabi
+index dddddc7c444..c2502597953 100644
+--- a/libgcc/config/arm/t-bpabi
++++ b/libgcc/config/arm/t-bpabi
+@@ -17,4 +17,4 @@ SHLIB_MAPFILES += $(srcdir)/config/arm/libgcc-bpabi.ver
+ # On ARM, specifying -fnon-call-exceptions will needlessly pull in
+ # the unwinder in simple programs which use 64-bit division.  Omitting
+ # the option is safe.
+-LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
++LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index 93ff5b81dc5..20c0fe89a28 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -326,7 +326,7 @@ register_tm_clones (void)
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance
+diff --git a/libgcc/gthr.h b/libgcc/gthr.h
+index 1989c0c86ed..dc3220cdf3c 100644
+--- a/libgcc/gthr.h
++++ b/libgcc/gthr.h
+@@ -136,7 +136,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ /* The pe-coff weak support isn't fully compatible to ELF's weak.
+    For static libraries it might would work, but as we need to deal
+    with shared versions too, we disable it for mingw-targets.  */
+-#ifdef __MINGW32__
++#ifdef __MINGW32__ || defined(__DEVKITARM__)
+ #undef GTHREAD_USE_WEAK
+ #define GTHREAD_USE_WEAK 0
+ #endif
+diff --git a/libstdc++-v3/include/Makefile.am b/libstdc++-v3/include/Makefile.am
+index a880e8ee227..2050e2e4ccf 100644
+--- a/libstdc++-v3/include/Makefile.am
++++ b/libstdc++-v3/include/Makefile.am
+@@ -1417,6 +1417,7 @@ ${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITARM_GLIBCXX___/__DEVKITARM__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 
+diff --git a/libstdc++-v3/include/Makefile.in b/libstdc++-v3/include/Makefile.in
+index 0ff875b280b..7d270fc3a83 100644
+--- a/libstdc++-v3/include/Makefile.in
++++ b/libstdc++-v3/include/Makefile.in
+@@ -336,6 +336,7 @@ prefix = @prefix@
+ program_transform_name = @program_transform_name@
+ psdir = @psdir@
+ python_mod_dir = @python_mod_dir@
++runstatedir = @runstatedir@
+ sbindir = @sbindir@
+ sharedstatedir = @sharedstatedir@
+ srcdir = @srcdir@
+@@ -1891,6 +1892,7 @@ ${host_builddir}/gthr.h: ${toplevel_srcdir}/libgcc/gthr.h stamp-${host_alias}
+ 	    -e '/^#/s/\(${uppercase}${uppercase}*\)/_GLIBCXX_\1/g' \
+ 	    -e 's/_GLIBCXX_SUPPORTS_WEAK/__GXX_WEAK__/g' \
+ 	    -e 's/_GLIBCXX___MINGW32_GLIBCXX___/__MINGW32__/g' \
++	    -e 's/_GLIBCXX___DEVKITARM_GLIBCXX___/__DEVKITARM__/g' \
+ 	    -e 's,^#include "\(.*\)",#include <bits/\1>,g' \
+ 	    < $< > $@
+ 

dkarm-eabi/patches/gcc-7.1.0.patch

@@ -1,125 +0,0 @@
-diff -NBaur gcc-7.1.0/gcc/config/arm/t-arm-elf gcc-7.1.0-arm/gcc/config/arm/t-arm-elf
---- gcc-7.1.0/gcc/config/arm/t-arm-elf	2017-01-01 12:07:43.000000000 +0000
-+++ gcc-7.1.0-arm/gcc/config/arm/t-arm-elf	2017-05-03 12:58:45.387209969 +0100
-@@ -16,11 +16,19 @@
- # along with GCC; see the file COPYING3.  If not see
- # <http://www.gnu.org/licenses/>.
- 
--MULTILIB_OPTIONS     = marm/mthumb
--MULTILIB_DIRNAMES    = arm thumb
-+MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k mfloat-abi=hard
-+MULTILIB_DIRNAMES    = thumb be armv6k fpu
- MULTILIB_EXCEPTIONS  = 
- MULTILIB_MATCHES     =
- 
-+MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard 
-+
-+
-+MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
-+MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
-+
-+
-+
- #MULTILIB_OPTIONS     += mcpu=fa526/mcpu=fa626/mcpu=fa606te/mcpu=fa626te/mcpu=fmp626/mcpu=fa726te
- #MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
- #MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
-@@ -38,9 +46,9 @@
- # Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
- # express that here?  Also, we really need architecture v5e or later
- # (mcrr etc).
--MULTILIB_OPTIONS       += mfloat-abi=hard
--MULTILIB_DIRNAMES      += fpu
--MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
-+#MULTILIB_OPTIONS       += mfloat-abi=hard
-+#MULTILIB_DIRNAMES      += fpu
-+#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
- 
-diff -NBaur gcc-7.1.0/gcc/config/arm/unknown-elf.h gcc-7.1.0-arm/gcc/config/arm/unknown-elf.h
---- gcc-7.1.0/gcc/config/arm/unknown-elf.h	2017-01-01 12:07:43.000000000 +0000
-+++ gcc-7.1.0-arm/gcc/config/arm/unknown-elf.h	2017-06-08 12:22:17.868509897 +0100
-@@ -29,7 +29,7 @@
- #endif
- 
- /* Now we define the strings used to build the spec file.  */
--#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
-+#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
- 
- #undef  STARTFILE_SPEC
- #define STARTFILE_SPEC	\
-@@ -93,4 +93,9 @@
-    udivmoddi4, which will depend on the exception unwind routines,
-    which will depend on abort, which is defined in libc.  */ 
- #undef LINK_GCC_C_SEQUENCE_SPEC
--#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
-+#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
-+
-+/* The system headers under devkitARM are C++-aware.  */
-+#undef NO_IMPLICIT_EXTERN_C
-+#define NO_IMPLICIT_EXTERN_C
-+
-diff -NBaur gcc-7.1.0/gcc/gcc.c gcc-7.1.0-arm/gcc/gcc.c
---- gcc-7.1.0/gcc/gcc.c	2017-01-17 09:38:48.000000000 +0000
-+++ gcc-7.1.0-arm/gcc/gcc.c	2017-05-03 12:58:45.395210596 +0100
-@@ -779,6 +779,11 @@
- #endif
- #endif
- 
-+#ifndef LIBGLOSS_SPEC
-+# define LIBGLOSS_SPEC "-lsysbase"
-+#endif
-+
-+
- /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
- #ifndef STARTFILE_SPEC
- #define STARTFILE_SPEC  \
-@@ -1074,6 +1079,7 @@
- static const char *lib_spec = LIB_SPEC;
- static const char *link_gomp_spec = "";
- static const char *libgcc_spec = LIBGCC_SPEC;
-+static const char *libgloss_spec = LIBGLOSS_SPEC;
- static const char *endfile_spec = ENDFILE_SPEC;
- static const char *startfile_spec = STARTFILE_SPEC;
- static const char *linker_name_spec = LINKER_NAME;
-@@ -1579,6 +1585,7 @@
-   INIT_STATIC_SPEC ("lib",			&lib_spec),
-   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
-   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
-+  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
-   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
-   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
-   INIT_STATIC_SPEC ("version",			&compiler_version),
-diff -NBaur gcc-7.1.0/libgcc/config/arm/t-bpabi gcc-7.1.0-arm/libgcc/config/arm/t-bpabi
---- gcc-7.1.0/libgcc/config/arm/t-bpabi	2012-08-17 16:06:06.000000000 +0100
-+++ gcc-7.1.0-arm/libgcc/config/arm/t-bpabi	2017-05-03 12:58:45.395210596 +0100
-@@ -17,4 +17,4 @@
- # On ARM, specifying -fnon-call-exceptions will needlessly pull in
- # the unwinder in simple programs which use 64-bit division.  Omitting
- # the option is safe.
--LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
-+LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
-diff -NBaur gcc-7.1.0/libgcc/crtstuff.c gcc-7.1.0-arm/libgcc/crtstuff.c
---- gcc-7.1.0/libgcc/crtstuff.c	2017-01-01 12:07:43.000000000 +0000
-+++ gcc-7.1.0-arm/libgcc/crtstuff.c	2017-05-03 12:58:45.395210596 +0100
-@@ -47,7 +47,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
--
-+#define USED_FOR_TARGET
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
-diff -NBaur gcc-7.1.0/libgcc/Makefile.in gcc-7.1.0-arm/libgcc/Makefile.in
---- gcc-7.1.0/libgcc/Makefile.in	2017-04-19 09:08:44.000000000 +0100
-+++ gcc-7.1.0-arm/libgcc/Makefile.in	2017-05-03 12:58:45.399210922 +0100
-@@ -844,7 +844,7 @@
- # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
- # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
- 
--c_flags := -fexceptions
-+c_flags := -fno-exceptions
- 
- ifeq ($(enable_shared),yes)
- 

dkarm-eabi/patches/gdb-8.0.patch

@@ -1,441 +0,0 @@
-diff --git a/gdb/Makefile.in b/gdb/Makefile.in
-index 1d2dbaf3f7..2d24f09c1b 100644
---- a/gdb/Makefile.in
-+++ b/gdb/Makefile.in
-@@ -779,6 +779,7 @@ ALL_64_TARGET_OBS = \
- ALL_TARGET_OBS = \
- 	arc-tdep.o \
- 	arm.o \
-+	arm-3ds-tdep.o \
- 	arm-bsd-tdep.o \
- 	arm-get-next-pcs.o \
- 	arm-linux.o \
-@@ -2487,6 +2488,7 @@ ALLDEPFILES = \
- 	amd64-tdep.c \
- 	arc-tdep.c \
- 	arm.c \
-+	arm-3ds-tdep.c \
- 	arm-bsd-tdep.c \
- 	arm-get-next-pcs.c \
- 	arm-linux.c \
-diff --git a/gdb/arm-3ds-tdep.c b/gdb/arm-3ds-tdep.c
-new file mode 100644
-index 0000000000..ad014e28db
---- /dev/null
-+++ b/gdb/arm-3ds-tdep.c
-@@ -0,0 +1,197 @@
-+/* Target-dependent code for 3DS. */
-+
-+/* This uses code from GDB, which license is: */
-+
-+/*
-+   Copyright (C) 2002-2017 Free Software Foundation, Inc.
-+
-+   This file is part of GDB.
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 3 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
-+
-+#include "defs.h"
-+#include "gdbcore.h"
-+#include "target.h"
-+#include "osabi.h"
-+#include "xml-syscall.h"
-+
-+#include "arch/arm.h"
-+#include "arch/arm-get-next-pcs.h"
-+#include "arm-tdep.h"
-+
-+static const gdb_byte arm_3ds_arm_le_breakpoint[] = {0xff, 0x00, 0x00, 0xef};
-+static const gdb_byte arm_3ds_thumb_le_breakpoint[] = {0xff, 0xdf};
-+
-+static CORE_ADDR
-+  arm_3ds_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self);
-+
-+/* Operation function pointers for get_next_pcs.  */
-+static struct arm_get_next_pcs_ops arm_3ds_get_next_pcs_ops = {
-+  arm_get_next_pcs_read_memory_unsigned_integer,
-+  arm_3ds_get_next_pcs_syscall_next_pc,
-+  arm_get_next_pcs_addr_bits_remove,
-+  arm_get_next_pcs_is_thumb,
-+  NULL,
-+};
-+
-+static CORE_ADDR
-+arm_3ds_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self)
-+{
-+  CORE_ADDR next_pc = 0;
-+  CORE_ADDR pc = regcache_read_pc (self->regcache);
-+  int is_thumb = arm_is_thumb (self->regcache);
-+  ULONGEST svc_number = 0;
-+
-+  if (is_thumb)
-+    {
-+      next_pc = pc + 2;
-+    }
-+  else
-+    {
-+      next_pc = pc + 4;
-+    }
-+
-+  /* Addresses for calling Thumb functions have the bit 0 set.  */
-+  if (is_thumb)
-+    next_pc = MAKE_THUMB_ADDR (next_pc);
-+
-+  return next_pc;
-+}
-+
-+static VEC (CORE_ADDR) *
-+arm_3ds_software_single_step (struct regcache *regcache)
-+{
-+  struct gdbarch *gdbarch = get_regcache_arch (regcache);
-+  struct arm_get_next_pcs next_pcs_ctx;
-+  CORE_ADDR pc;
-+  int i;
-+  VEC (CORE_ADDR) *next_pcs = NULL;
-+  struct cleanup *old_chain;
-+
-+  /* If the target does have hardware single step, GDB doesn't have
-+     to bother software single step.  */
-+  if (target_can_do_single_step () == 1)
-+    return NULL;
-+
-+  old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
-+
-+  arm_get_next_pcs_ctor (&next_pcs_ctx,
-+			 &arm_3ds_get_next_pcs_ops,
-+			 gdbarch_byte_order (gdbarch),
-+			 gdbarch_byte_order_for_code (gdbarch),
-+			 1,
-+			 regcache);
-+
-+  next_pcs = arm_get_next_pcs (&next_pcs_ctx);
-+
-+  for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
-+    {
-+      pc = gdbarch_addr_bits_remove (gdbarch, pc);
-+      VEC_replace (CORE_ADDR, next_pcs, i, pc);
-+    }
-+
-+  discard_cleanups (old_chain);
-+
-+  return next_pcs;
-+}
-+
-+static LONGEST
-+arm_3ds_get_syscall_number (struct gdbarch *gdbarch,
-+			      ptid_t ptid)
-+{
-+  struct regcache *regs = get_thread_regcache (ptid);
-+
-+  ULONGEST pc;
-+  ULONGEST cpsr;
-+  ULONGEST t_bit = arm_psr_thumb_bit (gdbarch);
-+  int is_thumb;
-+  ULONGEST svc_number = -1;
-+
-+  regcache_cooked_read_unsigned (regs, ARM_PC_REGNUM, &pc);
-+  regcache_cooked_read_unsigned (regs, ARM_PS_REGNUM, &cpsr);
-+  is_thumb = (cpsr & t_bit) != 0;
-+
-+  if (is_thumb)
-+    {
-+      enum bfd_endian byte_order_for_code =
-+	gdbarch_byte_order_for_code (gdbarch);
-+
-+      /* PC gets incremented before the syscall-stop, so read the
-+	 previous instruction.  */
-+      unsigned long this_instr =
-+	read_memory_unsigned_integer (pc - 2, 2, byte_order_for_code);
-+
-+      unsigned long svc_operand = (0x00ff & this_instr);
-+      svc_number = svc_operand;
-+    }
-+  else
-+    {
-+      enum bfd_endian byte_order_for_code =
-+	gdbarch_byte_order_for_code (gdbarch);
-+
-+      /* PC gets incremented before the syscall-stop, so read the
-+	 previous instruction.  */
-+      unsigned long this_instr =
-+	read_memory_unsigned_integer (pc - 4, 4, byte_order_for_code);
-+
-+      unsigned long svc_operand = (0x000000ff & this_instr);
-+      svc_number = svc_operand;
-+    }
-+
-+  if (svc_number == 0xfe)
-+    {
-+      regcache_cooked_read_unsigned (regs, 12, &svc_number);
-+    }
-+
-+  return svc_number;
-+}
-+
-+static void
-+arm_3ds_init_abi (struct gdbarch_info info,
-+			    struct gdbarch *gdbarch)
-+{
-+  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
-+
-+  switch (info.byte_order)
-+    {
-+    case BFD_ENDIAN_LITTLE:
-+      tdep->arm_breakpoint = arm_3ds_arm_le_breakpoint;
-+      tdep->thumb_breakpoint = arm_3ds_thumb_le_breakpoint;
-+      tdep->arm_breakpoint_size = sizeof (arm_3ds_arm_le_breakpoint);
-+      tdep->thumb_breakpoint_size = sizeof (arm_3ds_thumb_le_breakpoint);
-+      break;
-+
-+    default:
-+      internal_error (__FILE__, __LINE__,
-+        _("arm_gdbarch_init: bad byte order"));
-+    }
-+  tdep->fp_model = ARM_FLOAT_VFP;
-+
-+  /* Single stepping.  */
-+  set_gdbarch_software_single_step (gdbarch, arm_3ds_software_single_step);
-+
-+  /* `catch syscall' */
-+  set_xml_syscall_file_name (gdbarch, "syscalls/arm-3ds.xml");
-+  set_gdbarch_get_syscall_number (gdbarch, arm_3ds_get_syscall_number);
-+}
-+
-+/* Provide a prototype to silence -Wmissing-prototypes.  */
-+extern initialize_file_ftype _initialize_arm_3ds_tdep;
-+
-+void
-+_initialize_arm_3ds_tdep (void)
-+{
-+  gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_3DS,
-+                          arm_3ds_init_abi);
-+}
-diff --git a/gdb/configure.tgt b/gdb/configure.tgt
-index fdcb7b1d69..d8fd1622b8 100644
---- a/gdb/configure.tgt
-+++ b/gdb/configure.tgt
-@@ -119,8 +119,8 @@ arm*-*-symbianelf*)
- 	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o arm-symbian-tdep.o"
- 	;;
- arm*-*-*)
--	# Target: ARM embedded system
--	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o"
-+	# Target: ARM embedded system (+ 3DS)
-+	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o arm-3ds-tdep.o"
- 	gdb_sim=../sim/arm/libsim.a
- 	;;
- 
-diff --git a/gdb/data-directory/Makefile.in b/gdb/data-directory/Makefile.in
-index 304d4b05c0..2cf8986d3a 100644
---- a/gdb/data-directory/Makefile.in
-+++ b/gdb/data-directory/Makefile.in
-@@ -63,7 +63,7 @@ GEN_SYSCALLS_FILES = \
- 	sparc-linux.xml \
- 	sparc64-linux.xml
- 
--SYSCALLS_FILES = gdb-syscalls.dtd freebsd.xml $(GEN_SYSCALLS_FILES)
-+SYSCALLS_FILES = gdb-syscalls.dtd freebsd.xml arm-3ds.xml $(GEN_SYSCALLS_FILES)
- 
- PYTHON_DIR = python
- PYTHON_INSTALL_DIR = $(DESTDIR)$(GDB_DATADIR)/$(PYTHON_DIR)
-diff --git a/gdb/defs.h b/gdb/defs.h
-index a0b586f401..a1508fd5b3 100644
---- a/gdb/defs.h
-+++ b/gdb/defs.h
-@@ -604,6 +604,7 @@ enum gdb_osabi
-   GDB_OSABI_LYNXOS178,
-   GDB_OSABI_NEWLIB,
-   GDB_OSABI_SDE,
-+  GDB_OSABI_3DS,
- 
-   GDB_OSABI_INVALID		/* keep this last */
- };
-diff --git a/gdb/osabi.c b/gdb/osabi.c
-index 84fa9c0273..c1c4bb1672 100644
---- a/gdb/osabi.c
-+++ b/gdb/osabi.c
-@@ -79,6 +79,7 @@ static const struct osabi_names gdb_osabi_names[] =
-   { "LynxOS178", NULL },
-   { "Newlib", NULL },
-   { "SDE", NULL },
-+  { "3DS", NULL },
- 
-   { "<invalid>", NULL }
- };
-diff --git a/gdb/syscalls/arm-3ds.xml b/gdb/syscalls/arm-3ds.xml
-new file mode 100644
-index 0000000000..48780b7bd5
---- /dev/null
-+++ b/gdb/syscalls/arm-3ds.xml
-@@ -0,0 +1,159 @@
-+<?xml version="1.0"?>
-+<!DOCTYPE syscalls_info SYSTEM "gdb-syscalls.dtd">
-+<!-- This file is located inside GDB and is based on files which license are: -->
-+<!-- Copyright (C) 2009-2017 Free Software Foundation, Inc.
-+
-+     Copying and distribution of this file, with or without modification,
-+     are permitted in any medium without royalty provided the copyright
-+     notice and this notice are preserved.  This file is offered as-is,
-+     without any warranty. -->
-+<syscalls_info>
-+  <syscall name="ControlMemory" number="1" groups="memory"/>
-+  <syscall name="QueryMemory" number="2" groups="memory"/>
-+
-+  <syscall name="ExitProcess" number="3" groups="process"/>
-+  <syscall name="GetProcessAffinityMask" number="4" groups="process"/>
-+  <syscall name="SetProcessAffinityMask" number="5" groups="process"/>
-+  <syscall name="GetProcessIdealProcessor" number="6" groups="process"/>
-+  <syscall name="SetProcessIdealProcessor" number="7" groups="process"/>
-+
-+  <syscall name="CreateThread" number="8" groups="thread"/>
-+  <syscall name="ExitThread" number="9" groups="thread"/>
-+  <syscall name="SleepThread" number="10" groups="thread"/>
-+  <syscall name="GetThreadPriority" number="11" groups="thread"/>
-+  <syscall name="SetThreadPriority" number="12" groups="thread"/>
-+  <syscall name="GetThreadAffinityMask" number="13" groups="thread"/>
-+  <syscall name="SetThreadAffinityMask" number="14" groups="thread"/> <!-- removed -->
-+  <syscall name="GetThreadIdealProcessor" number="15" groups="thread"/>
-+  <syscall name="SetThreadIdealProcessor" number="16" groups="thread"/> <!-- removed -->
-+  <syscall name="GetCurrentProcessorNumber" number="17" groups="thread"/>
-+  <syscall name="Run" number="18" groups="thread"/>
-+
-+  <syscall name="CreateMutex" number="19" groups="synchronization"/>
-+  <syscall name="ReleaseMutex" number="20" groups="synchronization"/>
-+  <syscall name="CreateSemaphore" number="21" groups="synchronization"/>
-+  <syscall name="ReleaseSemaphore" number="22" groups="synchronization"/>
-+  <syscall name="CreateEvent" number="23" groups="synchronization"/>
-+  <syscall name="SignalEvent" number="24" groups="synchronization"/>
-+  <syscall name="ClearEvent" number="25" groups="synchronization"/>
-+  <syscall name="CreateTimer" number="26" groups="synchronization"/>
-+  <syscall name="SetTimer" number="27" groups="synchronization"/>
-+  <syscall name="CancelTimer" number="28" groups="synchronization"/>
-+  <syscall name="ClearTimer" number="29" groups="synchronization"/>
-+
-+  <syscall name="CreateMemoryBlock" number="30" groups="memory,ipc"/>
-+  <syscall name="MapMemoryBlock" number="31" groups="memory,ipc"/>
-+  <syscall name="UnmapMemoryBlock" number="32" groups="memory,ipc"/>
-+
-+  <syscall name="CreateAddressArbiter" number="33" groups="memory,synchronization"/>
-+  <syscall name="ArbitrateAddress" number="34" groups="memory,synchronization"/>
-+
-+  <syscall name="CloseHandle" number="35" groups="synchronization,ipc,memory,thread,process,debug"/>
-+  <syscall name="WaitSynchronization" number="36" groups="synchronization,ipc,thread,process,debug"/>
-+  <syscall name="WaitSynchronizationN" number="37" groups="synchronization,ipc,thread,process,debug"/>
-+  <syscall name="SignalAndWait" number="38" groups="synchronization"/> <!-- removed -->
-+  <syscall name="DuplicateHandle" number="39" groups="synchronization,ipc,memory,thread,process,debug"/>
-+
-+  <syscall name="GetSystemTick" number="40" groups="information"/>
-+  <syscall name="GetHandleInfo" number="41" groups="information,synchronization,ipc,memory,thread,process,debug"/>
-+  <syscall name="GetSystemInfo" number="42" groups="information"/>
-+  <syscall name="GetProcessInfo" number="43" groups="information,process"/>
-+  <syscall name="GetThreadInfo" number="44" groups="information,thread"/>
-+
-+  <syscall name="ConnectToPort" number="45" groups="ipc"/>
-+  <syscall name="GetCFWInfo" number="46" groups="custom,information"/> <!-- deprecated -->
-+  <syscall name="SendSyncRequest2" number="47" groups="ipc"/> <!-- removed -->
-+  <syscall name="SendSyncRequest3" number="48" groups="ipc"/> <!-- removed -->
-+  <syscall name="SendSyncRequest4" number="49" groups="ipc"/> <!-- removed -->
-+  <syscall name="SendSyncRequest" number="50" groups="ipc"/> <!-- removed -->
-+
-+  <syscall name="OpenProcess" number="51" groups="process"/>
-+  <syscall name="OpenThread" number="52" groups="thread"/>
-+
-+  <syscall name="GetProcessId" number="53" groups="process"/>
-+  <syscall name="GetProcessIdOfThread" number="54" groups="process,thread"/>
-+  <syscall name="GetThreadId" number="55" groups="thread"/>
-+
-+  <syscall name="GetResourceLimit" number="56" groups="process"/>
-+  <syscall name="GetResourceLimitLimitValues" number="57" groups="process"/>
-+  <syscall name="GetResourceLimitCurrentValues" number="58" groups="process"/>
-+
-+  <syscall name="GetThreadContext" number="59" groups="debug,thread"/> <!-- removed -->
-+  <syscall name="Break" number="60" groups="debug"/>
-+  <syscall name="OutputDebugString" number="61" groups="debug"/>
-+  <syscall name="ControlPerformanceCounter" number="62" groups="debug"/>
-+
-+  <syscall name="CreatePort" number="71" groups="ipc"/>
-+  <syscall name="CreateSessionToPort" number="72" groups="ipc"/>
-+  <syscall name="CreateSession" number="73" groups="ipc"/>
-+  <syscall name="AcceptSession" number="74" groups="ipc"/>
-+  <syscall name="ReplyAndReceive1" number="75" groups="ipc"/>
-+  <syscall name="ReplyAndReceive2" number="76" groups="ipc"/>
-+  <syscall name="ReplyAndReceive3" number="77" groups="ipc"/>
-+  <syscall name="ReplyAndReceive4" number="78" groups="ipc"/>
-+  <syscall name="ReplyAndReceive" number="79" groups="ipc"/>
-+
-+  <syscall name="BindInterrupt" number="80" groups="io,synchronization"/>
-+  <syscall name="UnbindInterrupt" number="81" groups="io,synchronization"/>
-+  <syscall name="InvalidateProcessDataCache" number="82" groups="io,memory,process"/>
-+  <syscall name="StoreProcessDataCache" number="83" groups="io,memory,process"/>
-+  <syscall name="FlushProcessDataCache" number="84" groups="io,memory,process"/>
-+
-+  <syscall name="StartInterprocessDma" number="85" groups="io,memory,ipc"/>
-+  <syscall name="StopDma" number="86" groups="io,memory,ipc"/>
-+  <syscall name="GetDmaState" number="87" groups="io,memory,ipc"/>
-+  <syscall name="RestartDma" number="88" groups="io,memory,ipc"/>
-+
-+  <syscall name="SetGpuProt" number="89" groups="io"/>
-+  <syscall name="SetWifiEnabled" number="90" groups="io"/>
-+
-+  <syscall name="DebugActiveProcess" number="96" groups="debug,process"/>
-+  <syscall name="BreakDebugProcess" number="97" groups="debug,process"/>
-+  <syscall name="TerminateDebugProcess" number="98" groups="debug,process"/>
-+  <syscall name="GetProcessDebugEvent" number="99" groups="debug"/>
-+  <syscall name="ContinueDebugEvent" number="100" groups="debug"/>
-+  <syscall name="GetProcessList" number="101" groups="information,debug,process"/>
-+  <syscall name="GetThreadList" number="102" groups="information,debug,thread"/>
-+  <syscall name="GetDebugThreadContext" number="103" groups="debug,thread"/>
-+  <syscall name="SetDebugThreadContext" number="104" groups="debug,thread"/>
-+  <syscall name="QueryDebugProcessMemory" number="105" groups="debug,process,memory"/>
-+  <syscall name="ReadProcessMemory" number="106" groups="debug,process,memory"/>
-+  <syscall name="WriteProcessMemory" number="107" groups="debug,process,memory"/>
-+  <syscall name="SetHardwareBreakPoint" number="108" group="debug"/>
-+  <syscall name="GetDebugThreadParam" number="109" group="debug,thread"/>
-+
-+  <syscall name="ControlProcessMemory" number="112" group="process,memory"/>
-+  <syscall name="MapProcessMemory" number="113" group="process,memory"/>
-+  <syscall name="UnmapProcessMemory" number="114" group="process,memory"/>
-+
-+  <syscall name="CreateCodeSet" number="115" group="process,memory"/>
-+  <syscall name="RandomStub" number="116" group="process,memory"/> <!-- removed -->
-+  <syscall name="CreateProcess" number="117" group="process"/>
-+  <syscall name="TerminateProcess" number="118" group="process"/>
-+  <syscall name="SetProcessResourceLimits" number="119" group="process"/>
-+  <syscall name="CreateResourceLimit" number="120" group="process"/>
-+  <syscall name="SetResourceLimitValues" number="121" group="process"/>
-+  <syscall name="AddCodeSegment" number="122" group="process"/> <!-- removed -->
-+
-+  <syscall name="Backdoor" number="123" group="kernel"/>
-+  <syscall name="KernelSetState" number="124" group="kernel"/>
-+
-+  <syscall name="QueryProcessMemory" number="125" group="process,memory"/>
-+
-+  <syscall name="CustomBackdoor" number="128" group="custom,kernel"/>
-+
-+  <syscall name="ConvertVAToPA" number="144" group="custom,io,memory"/>
-+  <syscall name="FlushDataCacheRange" number="145" group="custom,io,memory"/>
-+  <syscall name="FlushEntireDataCache" number="146" group="custom,io,memory"/>
-+  <syscall name="InvalidateInstructionCacheRange" number="147" group="custom,io,memory"/>
-+  <syscall name="InvalidateEntireInstructionCache" number="148" group="custom,io,memory"/>
-+
-+  <syscall name="MapProcessMemoryEx" number="160" group="custom,process,memory"/>
-+  <syscall name="UnmapProcessMemoryEx" number="161" group="custom,process,memory"/>
-+  <syscall name="ControlMemoryEx" number="162" group="custom,memory"/>
-+
-+  <syscall name="ControlService" number="176" group="custom,ipc"/>
-+  <syscall name="CopyHandle" number="177" groups="custom,synchronization,ipc,thread,process,debug"/>
-+  <syscall name="TranslateHandle" number="178" groups="custom,synchronization,ipc,thread,process,debug"/>
-+
-+</syscalls_info>
-

dkarm-eabi/rules/3ds_rules

@@ -1,41 +0,0 @@
-ifeq ($(strip $(DEVKITPRO)),)
-$(error "Please set DEVKITPRO in your environment. export DEVKITPRO=<path to>devkitPro)
-endif
-
-include $(DEVKITARM)/base_rules
-
-PORTLIBS	:=	$(PORTLIBS_PATH)/armv6k $(PORTLIBS_PATH)/3ds
-
-CTRULIB	?=	$(DEVKITPRO)/libctru
-
-ifeq ($(strip $(APP_TITLE)),)
-APP_TITLE	:=	$(notdir $(OUTPUT))
-endif
-
-ifeq ($(strip $(APP_DESCRIPTION)),)
-APP_DESCRIPTION	:=	Built with devkitARM & libctru
-endif
-
-ifeq ($(strip $(APP_AUTHOR)),)
-APP_AUTHOR	:=	Unspecified Author
-endif
-
-ifeq ($(strip $(APP_ICON)),)
-APP_ICON	:=	$(CTRULIB)/default_icon.png
-endif
-
-#---------------------------------------------------------------------------------
-%.smdh: $(APP_ICON) $(MAKEFILE_LIST)
-	@smdhtool --create "$(APP_TITLE)" "$(APP_DESCRIPTION)" "$(APP_AUTHOR)" $(APP_ICON) $@
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.3dsx: %.elf
-	@3dsxtool $< $@ $(_3DSXFLAGS)
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking $(notdir $@)
-	@$(LD) $(LDFLAGS) $(OFILES) $(LIBPATHS) $(LIBS) -o $@
-	@$(NM) -CSn $@ > $(notdir $*.lst)

dkarm-eabi/rules/base_rules

@@ -1,111 +0,0 @@
-include $(DEVKITARM)/base_tools
-
-#---------------------------------------------------------------------------------
-# add portlibs path
-#---------------------------------------------------------------------------------
-export PORTLIBS_PATH	:=	$(DEVKITPRO)/portlibs
-
-
-#---------------------------------------------------------------------------------
-%.a:
-#---------------------------------------------------------------------------------
-	@echo $(notdir $@)
-	@rm -f $@
-	$(AR) -rc $@ $^
-
-#---------------------------------------------------------------------------------
-%.arm.o: %.arm.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.arm.d $(CXXFLAGS) -marm -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.arm.o: %.arm.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.arm.d $(CFLAGS) -marm -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.arm.o: %.arm.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.arm.d $(OBJCFLAGS) -marm -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.thumb.o: %.thumb.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.thumb.d $(CXXFLAGS) -mthumb -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.thumb.o: %.thumb.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.thumb.d $(CFLAGS) -mthumb -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.thumb.o: %.thumb.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.thumb.d $(OBJCFLAGS) -mthumb -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.iwram.o: %.iwram.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.iwram.d $(CXXFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.iwram.o: %.iwram.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.iwram.d $(CFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.iwram.o: %.iwram.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.iwram.d $(OBJCFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.itcm.o: %.itcm.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.itcm.d $(CXXFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.itcm.o: %.itcm.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.itcm.d $(CFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.itcm.o: %.itcm.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.itcm.d $(OBJCFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-
-
-#---------------------------------------------------------------------------------
-%.o: %.cpp
-	@echo $(notdir $<)
-	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.c
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.m
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(OBJCFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.s
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.S
-	@echo $(notdir $<)
-	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-# canned command sequence for binary data
-#---------------------------------------------------------------------------------
-define bin2o
-	bin2s $< | $(AS) -o $(@)
-	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo $(<F) | tr . _)`.h
-	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo $(<F) | tr . _)`.h
-	echo "extern const u32" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo $(<F) | tr . _)`.h
-endef
-

dkarm-eabi/rules/ds_rules

@@ -1,54 +0,0 @@
-ifeq ($(strip $(DEVKITPRO)),)
-$(error "Please set DEVKITPRO in your environment. export DEVKITPRO=<path to>devkitPro)
-endif
-
-include $(DEVKITARM)/base_rules
-
-PORTLIBS	:=	$(PORTLIBS_PATH)/nds $(PORTLIBS_PATH)/armv5te
-
-LIBNDS		:=	$(DEVKITPRO)/libnds
-
-ifeq ($(strip $(GAME_TITLE)),)
-GAME_TITLE	:=	$(notdir $(OUTPUT))
-endif
-
-ifeq ($(strip $(GAME_SUBTITLE1)),)
-GAME_SUBTITLE1	:=	built with devkitARM
-endif
-
-ifeq ($(strip $(GAME_SUBTITLE2)),)
-GAME_SUBTITLE2	:=	http://devkitpro.org
-endif
-
-ifeq ($(strip $(GAME_ICON)),)
-GAME_ICON      :=      $(DEVKITPRO)/libnds/icon.bmp
-endif
-
-ifneq ($(strip $(NITRO_FILES)),)
-_ADDFILES	:=	-d $(NITRO_FILES)
-endif
-
-#---------------------------------------------------------------------------------
-%.nds: %.arm9
-	@ndstool -c $@ -9 $< -b $(GAME_ICON) "$(GAME_TITLE);$(GAME_SUBTITLE1);$(GAME_SUBTITLE2)" $(_ADDFILES)
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.nds: %.elf
-	@ndstool -c $@ -9 $< -b $(GAME_ICON) "$(GAME_TITLE);$(GAME_SUBTITLE1);$(GAME_SUBTITLE2)" $(_ADDFILES)
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.arm9: %.elf
-	@$(OBJCOPY) -O binary $< $@
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.arm7: %.elf
-	@$(OBJCOPY) -O binary $< $@
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking $(notdir $@)
-	@$(LD)  $(LDFLAGS) $(OFILES) $(LIBPATHS) $(LIBS) -o $@

dkarm-eabi/rules/gba_rules

@@ -1,25 +0,0 @@
-ifeq ($(strip $(DEVKITPRO)),)
-$(error "Please set DEVKITPRO in your environment. export DEVKITPRO=<path to>devkitPro)
-endif
-
-include $(DEVKITARM)/base_rules
-
-PORTLIBS	:=	$(PORTLIBS_PATH)/gba $(PORTLIBS_PATH)/armv4
-
-LIBGBA	:=	$(DEVKITPRO)/libgba
-
-#---------------------------------------------------------------------------------
-%.gba: %.elf
-	@$(OBJCOPY) -O binary $< $@
-	@echo built ... $(notdir $@)
-	@gbafix $@
-
-#---------------------------------------------------------------------------------
-%_mb.elf:
-	@echo linking multiboot
-	@$(LD) -specs=gba_mb.specs $(LDFLAGS) $(OFILES) $(LIBPATHS) $(LIBS) -o $@
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking cartridge
-	@$(LD)  $(LDFLAGS) -specs=gba.specs $(OFILES) $(LIBPATHS) $(LIBS) -o $@

dkarm-eabi/rules/gp32_rules

@@ -1,20 +0,0 @@
--include $(DEVKITARM)/base_rules
-
-PORTLIBS	:=	$(PORTLIBS_PATH)/gp32 $(PORTLIBS_PATH)/armv4
-
-LIBMIRKO	:=	$(DEVKITPRO)/libmirko
-
-#---------------------------------------------------------------------------------
-%.fxe: %.bin
-	@b2fxec -a "$(AUTHOR)" -t "$(TITLE)" $< $@
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.bin: %.elf
-	@$(OBJCOPY) -O binary $< $@
-	@echo built ... $(notdir $@)
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking binary
-	@$(LD)  $(LDFLAGS) -specs=gp32.specs $(OFILES) $(LIBPATHS) $(LIBS) -o $@

dkarm-eabi/scripts/build-crtls.sh

@@ -1,66 +1,26 @@
 #!/bin/sh
 
+#---------------------------------------------------------------------------------
+# set env variables
+#---------------------------------------------------------------------------------
 export DEVKITPRO=$TOOLPATH
 export DEVKITARM=$DEVKITPRO/devkitARM
 
 #---------------------------------------------------------------------------------
-# copy base rulesets
+# Install the rules files
 #---------------------------------------------------------------------------------
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/rules/* $prefix
+cd $BUILDDIR
+
+tar -xvf $SRCDIR/devkitarm-rules-$DKARM_RULES_VER.tar.gz
+cd devkitarm-rules-$DKARM_RULES_VER
+make install
 
 #---------------------------------------------------------------------------------
-# Install and build the gba crt
+# Install and build the crt0 files
 #---------------------------------------------------------------------------------
+cd $BUILDDIR
 
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/$target/lib/
+tar -xvf $SRCDIR/devkitarm-crtls-$DKARM_CRTLS_VER.tar.gz
-cd $prefix/$target/lib/
+cd devkitarm-crtls-$DKARM_CRTLS_VER
-$MAKE CRT=gba
+make install
-$MAKE CRT=gp32
-$MAKE CRT=er
-$MAKE CRT=gp32_gpsdk
-$MAKE CRT=ds_arm7
-$MAKE CRT=ds_arm9
-$MAKE CRT=ds_cart
-$MAKE ds_arm7_vram_crt0
-$MAKE 3dsx_crt0
-
-cd $BUILDDIR/libgba-$LIBGBA_VER
-$MAKE || { echo "error building libgba"; exit 1; }
-$MAKE install || { echo "error installing libgba"; exit 1; }
-
-cd $BUILDDIR/libnds-$LIBNDS_VER
-$MAKE || { echo "error building libnds"; exit 1; }
-$MAKE install || { echo "error installing libnds"; exit 1; }
-
-cd $BUILDDIR/dswifi-$DSWIFI_VER
-$MAKE || { echo "error building dswifi"; exit 1; }
-$MAKE install || { echo "error installing dswifi"; exit 1; }
-
-cd $BUILDDIR/maxmod-$MAXMOD_VER
-$MAKE || { echo "error building maxmod"; exit 1; }
-$MAKE install || { echo "error installing maxmod"; exit 1; }
-
-cd $BUILDDIR/default_arm7-$DEFAULT_ARM7_VER
-$MAKE || { echo "error building default arm7"; exit 1; }
-$MAKE install || { echo "error installing default arm7"; exit 1; }
-
-cd $BUILDDIR/libfat-$LIBFAT_VER
-$MAKE nds-install || { echo "error building nds libfat"; exit 1; }
-$MAKE gba-install || { echo "error installing gba libfat"; exit 1; }
-
-#cd $BUILDDIR/libmirko-$LIBMIRKO_VER
-#$MAKE || { echo "error building libmirko"; exit 1; }
-#$MAKE install || { echo "error installing libmirko"; exit 1; }
-
-cd $BUILDDIR/libfilesystem-$FILESYSTEM_VER
-$MAKE || { echo "error building libfilesystem"; exit 1; }
-$MAKE install || { echo "error installing libfilesystem"; exit 1; }
-
-cd $BUILDDIR/libctru-$LIBCTRU_VER
-$MAKE || { echo "error building libctru"; exit 1; }
-$MAKE install || { echo "error installing libctru"; exit 1; }
-
-cd $BUILDDIR/citro3d-$CITRO3D_VER
-$MAKE || { echo "error building libctru"; exit 1; }
-$MAKE install || { echo "error installing libctru"; exit 1; }
 

dkarm-eabi/scripts/build-gcc.sh

@@ -10,9 +10,10 @@ cd $target/binutils
 
 if [ ! -f configured-binutils ]
 then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+	CPPFLAGS="$cppflags $CPPFLAGS" LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
         --prefix=$prefix --target=$target --disable-nls --disable-werror \
-	--enable-lto --enable-plugins --enable-poison-system-directories \
+	--enable-lto --enable-plugins \
+	--enable-poison-system-directories \
 	$CROSS_PARAMS \
         || { echo "Error configuring binutils"; exit 1; }
 	touch configured-binutils
@@ -39,14 +40,13 @@ cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" \
+	CPPFLAGS="$cppflags $CPPFLAGS" \
-	CXXFLAGS="$cflags" \
 	LDFLAGS="$ldflags" \
 	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	LDFLAGS_FOR_TARGET="" \
 	../../gcc-$GCC_VER/configure \
-		--enable-languages=c,c++ \
+		--enable-languages=c,c++,objc,lto \
 		--with-gnu-as --with-gnu-ld --with-gcc \
 		--with-march=armv4t\
 		--enable-cxx-flags='-ffunction-sections' \
@@ -56,14 +56,20 @@ then
 		--enable-threads --disable-win32-registry --disable-nls --disable-debug\
 		--disable-libmudflap --disable-libssp --disable-libgomp \
 		--disable-libstdcxx-pch \
+		--enable-libstdcxx-time=yes \
+		--enable-libstdcxx-filesystem-ts \
 		--target=$target \
 		--with-newlib \
 		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 		--prefix=$prefix \
-		--enable-lto $plugin_ld\
+		--enable-lto\
 		--with-system-zlib \
-		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 47" \
+		--disable-tm-clone-registry \
+		--disable-__cxa_atexit \
+		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 61" \
 		$CROSS_PARAMS \
+		$CROSS_GCC_PARAMS \
+                $EXTRA_GCC_PARAMS \
 		|| { echo "Error configuring gcc"; exit 1; }
 	touch configured-gcc
 fi
@@ -84,6 +90,11 @@ fi
 unset CFLAGS
 cd $BUILDDIR
 
+OLD_CC=$CC
+OLDCXX=$CXX
+unset CC
+unset CXX
+
 #---------------------------------------------------------------------------------
 # build and install newlib
 #---------------------------------------------------------------------------------
@@ -116,6 +127,9 @@ then
 	touch installed-newlib
 fi
 
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
 #---------------------------------------------------------------------------------
 # build and install the final compiler
 #---------------------------------------------------------------------------------
@@ -139,36 +153,3 @@ fi
 rm -fr $prefix/$target/sys-include
 
 cd $BUILDDIR
-
-#---------------------------------------------------------------------------------
-# build and install the debugger
-#---------------------------------------------------------------------------------
-mkdir -p $target/gdb
-cd $target/gdb
-
-PLATFORM=`uname -s`
-
-if [ ! -f configured-gdb ]
-then
-	CFLAGS="$cflags" \
-	CXXFLAGS="$cflags" \
-	LDFLAGS="$ldflags" \
-	../../gdb-$GDB_VER/configure \
-	--disable-nls --prefix=$prefix --target=$target --disable-werror \
-	$CROSS_PARAMS \
-	|| { echo "Error configuring gdb"; exit 1; }
-	touch configured-gdb
-fi
-
-if [ ! -f built-gdb ]
-then
-	$MAKE || { echo "Error building gdb"; exit 1; }
-	touch built-gdb
-fi
-
-if [ ! -f installed-gdb ]
-then
-	$MAKE install || { echo "Error installing gdb"; exit 1; }
-	touch installed-gdb
-fi
-

dkarm-eabi/scripts/build-tools.sh

@@ -1,20 +0,0 @@
-#!/bin/bash
-cd $BUILDDIR
-
-for archive in $hostarchives
-do
-	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
-	cd $BUILDDIR/$dir
-	if [ ! -f configured ]; then
-		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$prefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
-		touch configured
-	fi
-	if [ ! -f built ]; then
-		$MAKE || { echo "error building $dir"; exit 1; }
-		touch built
-	fi
-	if [ ! -f installed ]; then
-		$MAKE install || { echo "error installing $dir"; exit 1; }
-		touch installed
-	fi
-done

dkppc/crtls/ogc.ld

@@ -93,7 +93,11 @@ SECTIONS
 
 	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
 	.rodata1   : { *(.rodata1) }
-	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
+	.sdata2   : { 
+		PROVIDE(_SDA2_BASE_ = . );
+		*(.sdata2) *(.sdata2.*)
+		*(.gnu.linkonce.s2.*)
+	}
 	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  */
@@ -174,6 +178,7 @@ SECTIONS
 
 	.sdata     :
 	{
+		PROVIDE(_SDA_BASE_ = . );
 		*(.sdata)
 		*(.sdata.*)
 		*(.gnu.linkonce.s.*)

dkppc/crtls/rvl.ld

@@ -104,7 +104,12 @@ SECTIONS
 
 	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
 	.rodata1   : { *(.rodata1) }
-	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
+	.sdata2   : {
+		PROVIDE(_SDA2_BASE_ = .);
+		*(.sdata2)
+		*(.sdata2.*)
+		*(.gnu.linkonce.s2.*)
+	}
 	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  */
@@ -185,6 +190,7 @@ SECTIONS
 
 	.sdata     :
 	{
+		PROVIDE(_SDA_BASE_ = .);
 		*(.sdata)
 		*(.sdata.*)
 		*(.gnu.linkonce.s.*)

dkppc/crtls/wup.ld

@@ -1,257 +0,0 @@
-/*
- * Linkscript for Wii U
- */
-
-OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc");
-OUTPUT_ARCH(powerpc:common);
-EXTERN(_start);
-ENTRY(_start);
-
-PHDRS
-{
-  stub PT_LOAD FLAGS(5);
-  text PT_LOAD FLAGS(5);
-  data PT_LOAD FLAGS(6);
-  bss1 PT_LOAD;
-  bss2 PT_LOAD;
-}
-
-SECTIONS
-{
-	/* default base address */
-	/* use -Wl,--section-start,.init=0xADDRESS to change */
-	. = 0x00802000;
-
-	/* Program */
-	.init          :
-	{
-		KEEP (*crt0.o(*.init))
-		KEEP (*(.init))
-	} :text = 0
-	.plt      : { *(.plt)	}
-	.interp			: { *(.interp) 	}
-	.hash			: { *(.hash) }
-	.dynsym			: { *(.dynsym) }
-	.dynstr			: { *(.dynstr) }
-	.gnu.version	: { *(.gnu.version) }
-	.gnu.version_d	: { *(.gnu.version_d) }
-	.gnu.version_r	: { *(.gnu.version_r) }
-	.rel.init		: { *(.rel.init) }
-	.rela.init		: { *(.rela.init) }
-	.rel.text		: { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
-	.rela.text		: { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
-	.rel.fini		: { *(.rel.fini) }
-	.rela.fini		: { *(.rela.fini) }
-	.rel.rodata		: { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
-	.rela.rodata	: { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
-	.rel.data		: { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
-	.rela.data		: { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
-	.rel.tdata		: { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
-	.rela.tdata		: { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
-	.rel.tbss		: { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
-	.rela.tbss		: { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
-	.rel.ctors		: { *(.rel.ctors) }
-	.rela.ctors		: { *(.rela.ctors) }
-	.rel.dtors		: { *(.rel.dtors) }
-	.rela.dtors		: { *(.rela.dtors) }
-	.rel.got		: { *(.rel.got)	}
-	.rela.got		: { *(.rela.got) }
-	.rela.got1		: { *(.rela.got1) }
-	.rela.got2		: { *(.rela.got2) }
-	.rel.sdata		: { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
-	.rela.sdata		: { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
-	.rel.sbss		: { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
-	.rela.sbss		: { *(.rela.sbss .rela.sbss.* .rel.gnu.linkonce.sb.*) }
-	.rel.sdata2		: { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
-	.rela.sdata2	: { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
-	.rel.sbss2		: { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
-	.rela.sbss2		: { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
-	.rel.bss		: { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
-	.rela.bss		: { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
-	.rel.plt		: { *(.rel.plt) }
-	.rela.plt		: { *(.rela.plt) }
-
-	.text      :
-	{
-		*(.text)
-		*(.text.*)
-		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
-		*(.gnu.linkonce.t.*)
-		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
-	} = 0
-
-	.fini      :
-	{
-		KEEP (*(.fini))
-		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
-	} = 0
-	
-	PROVIDE (__etext = .);
-	PROVIDE (_etext = .);
-	PROVIDE (etext = .);
-
-	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
-	.rodata1   : { *(.rodata1) }
-	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
-	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-	. = ALIGN(32 / 8);
-	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { *(.preinit_array) }
-	PROVIDE (__preinit_array_end = .);
-	PROVIDE (__init_array_start = .);
-	.init_array     : { *(.init_array) }
-	PROVIDE (__init_array_end = .);
-	PROVIDE (__fini_array_start = .);
-	.fini_array     : { *(.fini_array) }
-	PROVIDE (__fini_array_end = .);
-	.data    :
-	{
-		*(.data)
-		*(.data.*)
-		*(.gnu.linkonce.d.*)
-		SORT(CONSTRUCTORS)
-		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
-	}
-
-	.data1   : { *(.data1) }
-	.tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
-	.tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
-	.eh_frame : { KEEP (*(.eh_frame)) }
-	.gcc_except_table : { *(.gcc_except_table) }
-	.fixup          : { *(.fixup) }
-	.got1           : { *(.got1) }
-	.got2           : { *(.got2) }
-	.dynamic       : { *(.dynamic) }
-
-	.ctors   :
-	{
-	/*	gcc uses crtbegin.o to find the start of
-		the constructors, so we make sure it is
-		first.  Because this is a wildcard, it
-		doesn't matter if the user does not
-		actually link against crtbegin.o; the
-		linker won't look for a file to match a
-		wildcard.  The wildcard also means that it
-		doesn't matter which directory crtbegin.o
-		is in.  */
-
-		KEEP (*crtbegin.o(.ctors))
-
-    /*	We don't want to include the .ctor section from
-		from the crtend.o file until after the sorted ctors.
-		The .ctor section from the crtend file contains the
-		end of ctors marker and it must be last */
-
-		KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
-		KEEP (*(SORT(.ctors.*)))
-		KEEP (*(.ctors))
-		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
-	}
-
-	.dtors         :
-	{
-		KEEP (*crtbegin.o(.dtors))
-		KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
-		KEEP (*(SORT(.dtors.*)))
-		KEEP (*(.dtors))
-		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
-	}
-
-	.jcr            : { KEEP (*(.jcr)) }
-	.got		  : { *(.got.plt) *(.got) }
-
-
-	/*	We want the small data sections together, so single-instruction offsets
-		can access them all, and initialized data all before uninitialized, so
-		we can shorten the on-disk segment size.  */
-
-	.sdata     :
-	{
-		*(.sdata)
-		*(.sdata.*)
-		*(.gnu.linkonce.s.*)
-		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
-	}
-
-	_edata = .;
-	PROVIDE (edata = .);
-	
-	.sbss      :
-	{
-		__sbss_start = .;
-		PROVIDE (__sbss_start = .);
-		PROVIDE (___sbss_start = .);
-		*(.dynsbss)
-		*(.sbss)
-		*(.sbss.*)
-		*(.gnu.linkonce.sb.*)
-		*(.scommon)
-		PROVIDE (__sbss_end = .);
-		PROVIDE (___sbss_end = .);
-		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
-		__sbss_end = .;
-	} :bss1
-
-	.bss       :
-	{
-		__bss_start = .;
-		PROVIDE (__bss_start = .);
-		*(.dynbss)
-		*(.bss)
-		*(.bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-	/*	Align here to ensure that the .bss section occupies space up to
-		_end.  Align after .bss to ensure correct alignment even if the
-		.bss section disappears because there are no input sections.  */
-
-		. = ALIGN(32);
-
-		PROVIDE (__bss_end = .);
-		__bss_end = .;
-	} :bss2
-
-	_end = .;
-	PROVIDE(end = .);
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	/* These must appear regardless of  .  */
-}

dkppc/patches/binutils-2.27.patch

@@ -1,12 +0,0 @@
-diff -Nbaur binutils-2.27/opcodes/ppc-opc.c binutils-2.27-ppc/opcodes/ppc-opc.c
---- binutils-2.27/opcodes/ppc-opc.c	2016-08-03 08:36:54.000000000 +0100
-+++ binutils-2.27-ppc/opcodes/ppc-opc.c	2016-11-08 21:37:45.360000000 +0000
-@@ -3037,7 +3037,7 @@
- #define MFDEC1	PPC_OPCODE_POWER
- #define MFDEC2	PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE | PPC_OPCODE_TITAN
- #define BOOKE	PPC_OPCODE_BOOKE
--#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS
-+#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS
- #define PPCE300 PPC_OPCODE_E300
- #define PPCSPE	PPC_OPCODE_SPE
- #define PPCISEL PPC_OPCODE_ISEL

dkppc/patches/binutils-2.40.patch

@@ -0,0 +1,26 @@
+diff --git a/ld/emulparams/elf32ppccommon.sh b/ld/emulparams/elf32ppccommon.sh
+index da892988f5d..6b8efb9bbdb 100644
+--- a/ld/emulparams/elf32ppccommon.sh
++++ b/ld/emulparams/elf32ppccommon.sh
+@@ -23,7 +23,7 @@ else
+   unset SBSS_START_SYMBOLS
+   unset SBSS_END_SYMBOLS
+ fi
+-OTHER_END_SYMBOLS="${CREATE_SHLIB+PROVIDE (}__end = .${CREATE_SHLIB+)};"
++OTHER_END_SYMBOLS="${CREATE_SHLIB+PROVIDE (}__end = .${CREATE_SHLIB+)};${CREATE_SHLIB+PROVIDE (}__end__ = .${CREATE_SHLIB+)};"
+ OTHER_RELRO_SECTIONS="
+   .fixup        ${RELOCATING-0} : { *(.fixup) }
+   .got1         ${RELOCATING-0} : { *(.got1) }
+diff --git a/opcodes/ppc-opc.c b/opcodes/ppc-opc.c
+index 37f1aeb780c..f8de8aacc44 100644
+--- a/opcodes/ppc-opc.c
++++ b/opcodes/ppc-opc.c
+@@ -4988,7 +4988,7 @@ const unsigned int num_powerpc_operands = ARRAY_SIZE (powerpc_operands);
+ #define MFDEC2	(PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE \
+ 		 | PPC_OPCODE_TITAN)
+ #define BOOKE	PPC_OPCODE_BOOKE
+-#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS
++#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS
+ #define PPCE300 PPC_OPCODE_E300
+ #define PPCSPE	PPC_OPCODE_SPE
+ #define PPCSPE2 PPC_OPCODE_SPE2

dkppc/patches/gcc-12.2.0.patch

@@ -0,0 +1,992 @@
+diff --git a/config/gthr.m4 b/config/gthr.m4
+index 4b937306ad0..bfd0375bd60 100644
+--- a/config/gthr.m4
++++ b/config/gthr.m4
+@@ -13,6 +13,7 @@ AC_DEFUN([GCC_AC_THREAD_HEADER],
+ case $1 in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/gcc/config/i386/host-mingw32.cc b/gcc/config/i386/host-mingw32.cc
+index 3b0d83ffc60..6e063b6ccd0 100644
+--- a/gcc/config/i386/host-mingw32.cc
++++ b/gcc/config/i386/host-mingw32.cc
+@@ -45,7 +45,11 @@ static size_t mingw32_gt_pch_alloc_granularity (void);
+ static inline void w32_error(const char*, const char*, int, const char*);
+ 
+ /* FIXME: Is this big enough?  */
++#if __MINGW64__
++static const size_t pch_VA_max_size  = UINT64_C(64 * 1024 * 1024 * 1024);
++#else
+ static const size_t pch_VA_max_size  = 128 * 1024 * 1024;
++#endif
+ 
+ /* Granularity for reserving address space.  */
+ static size_t va_granularity = 0x10000;
+diff --git a/gcc/config/newlib-stdint.h b/gcc/config/newlib-stdint.h
+index 098f658e74f..50c74877deb 100644
+--- a/gcc/config/newlib-stdint.h
++++ b/gcc/config/newlib-stdint.h
+@@ -25,7 +25,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ /* newlib uses 32-bit long in certain cases for all non-SPU
+    targets.  */
+ #ifndef STDINT_LONG32
+-#define STDINT_LONG32 (LONG_TYPE_SIZE == 32)
++#define STDINT_LONG32 0
+ #endif
+ 
+ #define SIG_ATOMIC_TYPE "int"
+diff --git a/gcc/config/rs6000/eabi.h b/gcc/config/rs6000/eabi.h
+index e58283fe5d4..161767b2b08 100644
+--- a/gcc/config/rs6000/eabi.h
++++ b/gcc/config/rs6000/eabi.h
+@@ -36,6 +36,8 @@
+       builtin_assert ("system=embedded"); \
+       builtin_assert ("cpu=powerpc");     \
+       builtin_assert ("machine=powerpc"); \
++      builtin_define ("__DEVKITPPC__");   \
++      builtin_define ("__DEVKITPRO__");   \
+       TARGET_OS_SYSV_CPP_BUILTINS ();     \
+     }                                     \
+   while (0)
+diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
+index bc48f450210..7ba76802670 100644
+--- a/gcc/config/rs6000/rs6000.h
++++ b/gcc/config/rs6000/rs6000.h
+@@ -199,6 +199,7 @@ ASM_OPT_ANY
+ /* -mcpu=native handling only makes sense with compiler running on
+    an PowerPC chip.  If changing this condition, also change
+    the condition in driver-rs6000.cc.  */
++#if 0
+ #if defined(__powerpc__) || defined(__POWERPC__) || defined(_AIX)
+ /* In driver-rs6000.cc.  */
+ extern const char *host_detect_local_cpu (int argc, const char **argv);
+@@ -210,6 +211,8 @@ extern const char *host_detect_local_cpu (int argc, const char **argv);
+ #else
+ #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ #endif
++#endif
++#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ 
+ #ifndef CC1_CPU_SPEC
+ #ifdef HAVE_LOCAL_CPU_DETECT
+diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
+index 7e2519de5d4..bedfaf31808 100644
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -589,7 +589,11 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Default starting address if specified.  */
+ #define LINK_START_SPEC "\
+-%{mads         : %(link_start_ads)         ; \
++%{mgcn|mogc    : %(link_start_ogc)         ; \
++  mvgc         : %(link_start_vgc)         ; \
++  mgcbios      : %(link_start_gcb)         ; \
++  mrvl         : %(link_start_rvl)         ; \
++  mads         : %(link_start_ads)         ; \
+   myellowknife : %(link_start_yellowknife) ; \
+   mmvme        : %(link_start_mvme)        ; \
+   msim         : %(link_start_sim)         ; \
+@@ -620,7 +624,8 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Any specific OS flags.  */
+ #define LINK_OS_SPEC "\
+-%{mads         : %(link_os_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
++  mads         : %(link_os_ads)         ; \
+   myellowknife : %(link_os_yellowknife) ; \
+   mmvme        : %(link_os_mvme)        ; \
+   msim         : %(link_os_sim)         ; \
+@@ -635,7 +640,10 @@ GNU_USER_TARGET_CC1_SPEC
+ /* Override rs6000.h definition.  */
+ #undef	CPP_SPEC
+ #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
+-%{mads         : %(cpp_os_ads)         ; \
++%{mgcn         : %(cpp_os_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
++  mrvl         : %(cpp_os_rvl)         ; \
++  mads         : %(cpp_os_ads)         ; \
+   myellowknife : %(cpp_os_yellowknife) ; \
+   mmvme        : %(cpp_os_mvme)        ; \
+   msim         : %(cpp_os_sim)         ; \
+@@ -649,7 +657,10 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ #undef	STARTFILE_SPEC
+ #define	STARTFILE_SPEC "\
+-%{mads         : %(startfile_ads)         ; \
++%{mgcn         : %(startfile_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
++  mrvl         : %(startfile_ogc)         ; \
++  mads         : %(startfile_ads)         ; \
+   myellowknife : %(startfile_yellowknife) ; \
+   mmvme        : %(startfile_mvme)        ; \
+   msim         : %(startfile_sim)         ; \
+@@ -663,7 +674,8 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ #undef	LIB_SPEC
+ #define	LIB_SPEC "\
+-%{mads         : %(lib_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
++  mads         : %(lib_ads)         ; \
+   myellowknife : %(lib_yellowknife) ; \
+   mmvme        : %(lib_mvme)        ; \
+   msim         : %(lib_sim)         ; \
+@@ -673,11 +685,12 @@ GNU_USER_TARGET_CC1_SPEC
+   mcall-openbsd: %(lib_openbsd)     ; \
+                : %(lib_default)     }"
+ 
+-#define LIB_DEFAULT_SPEC "-lc"
++#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #undef	ENDFILE_SPEC
+ #define	ENDFILE_SPEC "\
+-%{mads         : %(endfile_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
++  mads         : %(endfile_ads)         ; \
+   myellowknife : %(endfile_yellowknife) ; \
+   mmvme        : %(endfile_mvme)        ; \
+   msim         : %(endfile_sim)         ; \
+@@ -693,16 +706,27 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Motorola ADS support.  */
+ #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
++#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
++#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
+ 
+ #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
+ 
+ #define LINK_START_ADS_SPEC "-T ads.ld%s"
++#define LINK_START_OGC_SPEC "-T ogc.ld%s"
++#define LINK_START_RVL_SPEC "-T rvl.ld%s"
++#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
++#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
+ 
+ #define LINK_OS_ADS_SPEC ""
++#define LINK_OS_OGC_SPEC "--gc-sections"
+ 
+ #define CPP_OS_ADS_SPEC ""
++#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
++#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
++#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
+ 
+ /* Motorola Yellowknife support.  */
+ #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
+@@ -850,6 +874,7 @@ ncrtn.o%s"
+ #undef	SUBTARGET_EXTRA_SPECS
+ #define	SUBTARGET_EXTRA_SPECS						\
+   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
++  { "lib_ogc",			LIB_OGC_SPEC },				\
+   { "lib_ads",			LIB_ADS_SPEC },				\
+   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
+   { "lib_mvme",			LIB_MVME_SPEC },			\
+@@ -859,6 +884,7 @@ ncrtn.o%s"
+   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
+   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
+   { "lib_default",		LIB_DEFAULT_SPEC },			\
++  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
+   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
+   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
+   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
+@@ -868,6 +894,7 @@ ncrtn.o%s"
+   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
+   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
+   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
++  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
+   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
+   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
+   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
+@@ -879,7 +906,11 @@ ncrtn.o%s"
+   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
+   { "link_shlib",		LINK_SHLIB_SPEC },			\
+   { "link_start",		LINK_START_SPEC },			\
++  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
++  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
++  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
+   { "link_start_ads",		LINK_START_ADS_SPEC },			\
++  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
+   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
+   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
+   { "link_start_sim",		LINK_START_SIM_SPEC },			\
+@@ -889,6 +920,7 @@ ncrtn.o%s"
+   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
+   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
+   { "link_os",			LINK_OS_SPEC },				\
++  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
+   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
+   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
+   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
+@@ -900,6 +932,9 @@ ncrtn.o%s"
+   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
+   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
+   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
++  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
++  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
++  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
+   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
+   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
+   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
+diff --git a/gcc/config/rs6000/sysv4.opt b/gcc/config/rs6000/sysv4.opt
+index ac75d67b19a..bdee36872f8 100644
+--- a/gcc/config/rs6000/sysv4.opt
++++ b/gcc/config/rs6000/sysv4.opt
+@@ -124,6 +124,26 @@ mads
+ Target RejectNegative
+ Link with libads.a, libc.a and crt0.o.
+ 
++mgcn
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mogc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mgcbios
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mvgc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mrvl
++Target RejectNegative
++Link with libsysbase.a and libc.a, use rvl linker script 
++
+ myellowknife
+ Target RejectNegative
+ Link with libyk.a, libc.a and crt0.o.
+diff --git a/gcc/configure b/gcc/configure
+index 5ce0557719a..a1c59e87b83 100755
+--- a/gcc/configure
++++ b/gcc/configure
+@@ -12884,7 +12884,7 @@ case ${enable_threads} in
+     # default
+     target_thread_file='single'
+     ;;
+-  aix | dce | lynx | mipssde | posix | rtems | \
++  aix | dce | dkp | lynx | mipssde | posix | rtems | \
+   single | tpf | vxworks | win32)
+     target_thread_file=${enable_threads}
+     ;;
+diff --git a/gcc/configure.ac b/gcc/configure.ac
+index 23bee7010a3..4540b6d3aee 100644
+--- a/gcc/configure.ac
++++ b/gcc/configure.ac
+@@ -1994,7 +1994,7 @@ case ${enable_threads} in
+     # default
+     target_thread_file='single'
+     ;;
+-  aix | dce | lynx | mipssde | posix | rtems | \
++  aix | dce | dkp | lynx | mipssde | posix | rtems | \
+   single | tpf | vxworks | win32)
+     target_thread_file=${enable_threads}
+     ;;
+diff --git a/libgcc/config/rs6000/crtrestvr.S b/libgcc/config/rs6000/crtrestvr.S
+index cf224657260..38683e58cb3 100644
+--- a/libgcc/config/rs6000/crtrestvr.S
++++ b/libgcc/config/rs6000/crtrestvr.S
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -86,3 +86,4 @@ FUNC_END(_restvr_20)
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff --git a/libgcc/config/rs6000/crtsavevr.S b/libgcc/config/rs6000/crtsavevr.S
+index 65e791741f7..631be3ec5ba 100644
+--- a/libgcc/config/rs6000/crtsavevr.S
++++ b/libgcc/config/rs6000/crtsavevr.S
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -86,3 +86,4 @@ FUNC_END(_savevr_20)
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff --git a/libgcc/config/rs6000/gthr-dkp.c b/libgcc/config/rs6000/gthr-dkp.c
+new file mode 100644
+index 00000000000..26180aa7f36
+--- /dev/null
++++ b/libgcc/config/rs6000/gthr-dkp.c
+@@ -0,0 +1,319 @@
++/* Threads compatibility routines for libgcc2 and libobjc.  */
++/* Compile this one with gcc.  */
++/* Copyright (C) 1997-2016 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++Under Section 7 of GPL version 3, you are granted additional
++permissions described in the GCC Runtime Library Exception, version
++3.1, as published by the Free Software Foundation.
++
++You should have received a copy of the GNU General Public License and
++a copy of the GCC Runtime Library Exception along with this program;
++see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++<http://www.gnu.org/licenses/>.  */
++
++#define _BUILDING_LIBGCC
++#include "gthr-dkp.h"
++#include <stddef.h>
++
++
++int
++__gthread_active_p (void)
++{
++  if (!__has_gthr_impl(active)) {
++    return 0;
++  }
++
++  return __gthr_impl_active();
++}
++
++int
++__gthread_create (__gthread_t *__threadid, void *(*__func) (void*),
++                  void *__args)
++{
++  if (!__has_gthr_impl(create)) {
++    return -1;
++  }
++
++  return __gthr_impl_create(__threadid, __func, __args);
++}
++
++int
++__gthread_join (__gthread_t __threadid, void **__value_ptr)
++{
++  if (!__has_gthr_impl(join)) {
++    return -1;
++  }
++
++  return __gthr_impl_join(__threadid, __value_ptr);
++}
++
++int
++__gthread_detach (__gthread_t __threadid)
++{
++  if (!__has_gthr_impl(detach)) {
++    return -1;
++  }
++
++  return __gthr_impl_detach(__threadid);
++}
++
++int
++__gthread_equal (__gthread_t __t1, __gthread_t __t2)
++{
++  if (!__has_gthr_impl(equal)) {
++    return -1;
++  }
++
++  return __gthr_impl_equal(__t1, __t2);
++}
++
++__gthread_t
++__gthread_self (void)
++{
++  if (!__has_gthr_impl(self)) {
++    __gthread_t result = { 0 };
++    return result;
++  }
++
++  return __gthr_impl_self();
++}
++
++int
++__gthread_yield (void)
++{
++  if (!__has_gthr_impl(yield)) {
++    return -1;
++  }
++
++  return __gthr_impl_yield();
++}
++
++int
++__gthread_once (__gthread_once_t *__once, void (*__func) (void))
++{
++  if (!__has_gthr_impl(once)) {
++    return -1;
++  }
++
++  return __gthr_impl_once(__once, __func);
++}
++
++int
++__gthread_key_create (__gthread_key_t *__key, void (*__dtor) (void *))
++{
++  if (!__has_gthr_impl(key_create)) {
++    return -1;
++  }
++
++  return __gthr_impl_key_create(__key, __dtor);
++}
++
++int
++__gthread_key_delete (__gthread_key_t __key)
++{
++  if (!__has_gthr_impl(key_delete)) {
++    return -1;
++  }
++
++  return __gthr_impl_key_delete(__key);
++}
++
++void *
++__gthread_getspecific (__gthread_key_t __key)
++{
++  if (!__has_gthr_impl(getspecific)) {
++    return NULL;
++  }
++
++  return __gthr_impl_getspecific(__key);
++}
++
++int
++__gthread_setspecific (__gthread_key_t __key, const void *__ptr)
++{
++  if (!__has_gthr_impl(setspecific)) {
++    return -1;
++  }
++
++  return __gthr_impl_setspecific(__key, __ptr);
++}
++
++void
++__gthread_mutex_init_function (__gthread_mutex_t *__mutex)
++{
++  if (__has_gthr_impl(mutex_init_function)) {
++    __gthr_impl_mutex_init_function(__mutex);
++  }
++}
++
++int
++__gthread_mutex_destroy (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_destroy(__mutex);
++}
++
++int
++__gthread_mutex_lock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_lock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_lock(__mutex);
++}
++
++int
++__gthread_mutex_trylock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_trylock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_trylock(__mutex);
++}
++
++int
++__gthread_mutex_unlock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_unlock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_unlock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_init_function (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_init_function)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_init_function(__mutex);
++}
++
++int
++__gthread_recursive_mutex_lock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_lock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_lock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_trylock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_trylock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_trylock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_unlock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_unlock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_unlock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_destroy (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_destroy(__mutex);
++}
++
++void
++__gthread_cond_init_function (__gthread_cond_t *__cond)
++{
++  if (__has_gthr_impl(cond_init_function)) {
++    __gthr_impl_cond_init_function(__cond);
++  }
++}
++
++int
++__gthread_cond_broadcast (__gthread_cond_t *__cond)
++{
++  if (!__has_gthr_impl(cond_broadcast)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_broadcast(__cond);
++}
++
++int
++__gthread_cond_signal (__gthread_cond_t *__cond)
++{
++  if (!__has_gthr_impl(cond_signal)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_signal(__cond);
++}
++
++int
++__gthread_cond_wait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(cond_wait)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_wait(__cond, __mutex);
++}
++
++int
++__gthread_cond_timedwait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                          const __gthread_time_t *__abs_timeout)
++{
++  if (!__has_gthr_impl(cond_timedwait)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_timedwait(__cond, __mutex, __abs_timeout);
++}
++
++int
++__gthread_cond_wait_recursive (__gthread_cond_t *__cond,
++                               __gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(cond_wait_recursive)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_wait_recursive(__cond, __mutex);
++}
++
++int
++__gthread_cond_destroy (__gthread_cond_t* __cond)
++{
++  if (!__has_gthr_impl(cond_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_destroy(__cond);
++}
+diff --git a/libgcc/config/rs6000/gthr-dkp.h b/libgcc/config/rs6000/gthr-dkp.h
+new file mode 100644
+index 00000000000..72ecf82ab83
+--- /dev/null
++++ b/libgcc/config/rs6000/gthr-dkp.h
+@@ -0,0 +1,187 @@
++/* Threads compatibility routines for libgcc2 and libobjc.  */
++/* Compile this one with gcc.  */
++/* Copyright (C) 1997-2016 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++Under Section 7 of GPL version 3, you are granted additional
++permissions described in the GCC Runtime Library Exception, version
++3.1, as published by the Free Software Foundation.
++
++You should have received a copy of the GNU General Public License and
++a copy of the GCC Runtime Library Exception along with this program;
++see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++<http://www.gnu.org/licenses/>.  */
++
++#ifndef _GLIBCXX_GCC_GTHR_DKP_H
++#define _GLIBCXX_GCC_GTHR_DKP_H
++
++#define __GTHREADS 1
++#define __GTHREADS_CXX0X 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef void *                      __gthread_t;
++typedef struct { int padding[7]; }  __gthread_cond_t;
++typedef struct { int padding; }     __gthread_key_t;
++typedef struct { int padding[11]; } __gthread_mutex_t;
++typedef struct { int padding; }     __gthread_once_t;
++typedef struct { int padding[11]; } __gthread_recursive_mutex_t;
++typedef struct timespec             __gthread_time_t;
++
++#define __GTHREAD_HAS_COND 1
++#define _GTHREAD_USE_MUTEX_TIMEDLOCK 0
++
++#define __GTHREAD_ONCE_INIT { 0 }
++#define __GTHREAD_TIME_INIT { 0, 0 }
++
++#define __GTHREAD_COND_INIT_FUNCTION __gthread_cond_init_function
++#define __GTHREAD_MUTEX_INIT_FUNCTION __gthread_mutex_init_function
++#define __GTHREAD_RECURSIVE_MUTEX_INIT_FUNCTION __gthread_recursive_mutex_init_function
++
++#ifdef _BUILDING_LIBGCC
++#define __GTHR_IMPL(_name) __attribute__((weak)) __gthr_impl_##_name
++#define __has_gthr_impl(_name) (&__gthr_impl_##_name)
++#else
++#define __GTHR_IMPL(_name) __gthr_impl_##_name
++#endif
++
++int __GTHR_IMPL(active) (void);
++int __GTHR_IMPL(create) (__gthread_t *__threadid, void *(*__func) (void*), void *__args);
++int __GTHR_IMPL(join) (__gthread_t __threadid, void **__value_ptr);
++int __GTHR_IMPL(detach) (__gthread_t __threadid);
++int __GTHR_IMPL(equal) (__gthread_t __t1, __gthread_t __t2);
++__gthread_t __GTHR_IMPL(self) (void);
++int __GTHR_IMPL(yield) (void);
++int __GTHR_IMPL(once) (__gthread_once_t *__once, void (*__func) (void));
++int __GTHR_IMPL(key_create) (__gthread_key_t *__key, void (*__dtor) (void *));
++int __GTHR_IMPL(key_delete) (__gthread_key_t __key);
++void * __GTHR_IMPL(getspecific) (__gthread_key_t __key);
++int __GTHR_IMPL(setspecific) (__gthread_key_t __key, const void *__ptr);
++void __GTHR_IMPL(mutex_init_function) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_destroy) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_lock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_trylock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_unlock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_init_function) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_lock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_trylock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_unlock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_destroy) (__gthread_recursive_mutex_t *__mutex);
++void __GTHR_IMPL(cond_init_function) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_broadcast) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_signal) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_wait) (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex);
++int __GTHR_IMPL(cond_timedwait) (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                         const __gthread_time_t *__abs_timeout);
++int __GTHR_IMPL(cond_wait_recursive) (__gthread_cond_t *__cond,
++                              __gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(cond_destroy) (__gthread_cond_t* __cond);
++
++int
++__gthread_active_p (void);
++
++int
++__gthread_create (__gthread_t *__threadid, void *(*__func) (void*),
++                  void *__args);
++
++int
++__gthread_join (__gthread_t __threadid, void **__value_ptr);
++
++int
++__gthread_detach (__gthread_t __threadid);
++
++int
++__gthread_equal (__gthread_t __t1, __gthread_t __t2);
++
++__gthread_t
++__gthread_self (void);
++
++int
++__gthread_yield (void);
++
++int
++__gthread_once (__gthread_once_t *__once, void (*__func) (void));
++
++int
++__gthread_key_create (__gthread_key_t *__key, void (*__dtor) (void *));
++
++int
++__gthread_key_delete (__gthread_key_t __key);
++
++void *
++__gthread_getspecific (__gthread_key_t __key);
++
++int
++__gthread_setspecific (__gthread_key_t __key, const void *__ptr);
++
++void
++__gthread_mutex_init_function (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_destroy (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_lock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_trylock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_unlock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_init_function (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_lock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_trylock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_unlock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_destroy (__gthread_recursive_mutex_t *__mutex);
++
++void
++__gthread_cond_init_function (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_broadcast (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_signal (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_wait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex);
++
++int
++__gthread_cond_timedwait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                          const __gthread_time_t *__abs_timeout);
++
++int
++__gthread_cond_wait_recursive (__gthread_cond_t *__cond,
++                               __gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_cond_destroy (__gthread_cond_t* __cond);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* ! _GLIBCXX_GCC_GTHR_DKP_H */
+diff --git a/libgcc/config/rs6000/t-ppccomm b/libgcc/config/rs6000/t-ppccomm
+index fb812d3801f..7f6669d530f 100644
+--- a/libgcc/config/rs6000/t-ppccomm
++++ b/libgcc/config/rs6000/t-ppccomm
+@@ -1,4 +1,5 @@
+ LIB2ADD += $(srcdir)/config/rs6000/ibm-ldouble.c \
++	   $(srcdir)/config/rs6000/gthr-dkp.c \
+ 	   $(srcdir)/config/rs6000/tramp.S
+ 
+ # This can't end up in shared libgcc
+diff --git a/libgcc/configure b/libgcc/configure
+index 1f9b2ac578b..539fd961156 100755
+--- a/libgcc/configure
++++ b/libgcc/configure
+@@ -5689,6 +5689,7 @@ tm_file="${tm_file_}"
+ case $target_thread_file in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index b98b86a5a88..3f62b3616d2 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -325,7 +325,7 @@ register_tm_clones (void)
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance
+diff --git a/libstdc++-v3/configure b/libstdc++-v3/configure
+index eac60392121..d1c85de1e34 100755
+--- a/libstdc++-v3/configure
++++ b/libstdc++-v3/configure
+@@ -15765,6 +15765,7 @@ $as_echo "$target_thread_file" >&6; }
+ case $target_thread_file in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/libstdc++-v3/include/std/fstream b/libstdc++-v3/include/std/fstream
+index e62a1ade3c2..5f8ec3a1495 100644
+--- a/libstdc++-v3/include/std/fstream
++++ b/libstdc++-v3/include/std/fstream
+@@ -46,7 +46,7 @@
+ 
+ // This can be overridden by the target's os_defines.h
+ #ifndef _GLIBCXX_BUFSIZ
+-# define _GLIBCXX_BUFSIZ BUFSIZ
++# define _GLIBCXX_BUFSIZ (BUFSIZ+1)
+ #endif
+ 
+ namespace std _GLIBCXX_VISIBILITY(default)
+diff --git a/libstdc++-v3/libsupc++/eh_alloc.cc b/libstdc++-v3/libsupc++/eh_alloc.cc
+index c85b9aed40b..a8f3f4a50d2 100644
+--- a/libstdc++-v3/libsupc++/eh_alloc.cc
++++ b/libstdc++-v3/libsupc++/eh_alloc.cc
+@@ -85,6 +85,7 @@ namespace
+     {
+     public:
+       pool();
++      ~pool();
+ 
+       _GLIBCXX_NODISCARD void *allocate (std::size_t);
+       void free (void *);
+@@ -136,6 +137,15 @@ namespace
+       first_free_entry->next = NULL;
+     }
+ 
++  pool::~pool()
++    {
++      if (arena)
++        {
++          ::free(arena);
++          arena = 0;
++        }
++    }
++
+   void *pool::allocate (std::size_t size)
+     {
+       __gnu_cxx::__scoped_lock sentry(emergency_mutex);
+diff --git a/libstdc++-v3/src/c++17/fs_ops.cc b/libstdc++-v3/src/c++17/fs_ops.cc
+index 435368fa5c5..75b78c384b4 100644
+--- a/libstdc++-v3/src/c++17/fs_ops.cc
++++ b/libstdc++-v3/src/c++17/fs_ops.cc
+@@ -1123,6 +1123,7 @@ fs::permissions(const path& p, perms prms, perm_options opts,
+     }
+ 
+   int err = 0;
++#ifndef __DEVKITPPC__
+ #if _GLIBCXX_USE_FCHMODAT
+   const int flag = (nofollow && is_symlink(st)) ? AT_SYMLINK_NOFOLLOW : 0;
+   if (::fchmodat(AT_FDCWD, p.c_str(), static_cast<mode_t>(prms), flag))
+@@ -1132,6 +1133,7 @@ fs::permissions(const path& p, perms prms, perm_options opts,
+     ec = std::__unsupported();
+   else if (posix::chmod(p.c_str(), static_cast<posix::mode_t>(prms)))
+     err = errno;
++#endif
+ #endif
+ 
+   if (err)
+diff --git a/libstdc++-v3/src/filesystem/ops-common.h b/libstdc++-v3/src/filesystem/ops-common.h
+index 978e8724154..f773d3b9b62 100644
+--- a/libstdc++-v3/src/filesystem/ops-common.h
++++ b/libstdc++-v3/src/filesystem/ops-common.h
+@@ -481,6 +481,7 @@ _GLIBCXX_BEGIN_NAMESPACE_FILESYSTEM
+ 	return false;
+       }
+ 
++#ifndef __DEVKITPPC__
+ #if defined _GLIBCXX_USE_FCHMOD && ! defined _GLIBCXX_FILESYSTEM_IS_WINDOWS
+     if (::fchmod(out.fd, from_st->st_mode))
+ #elif defined _GLIBCXX_USE_FCHMODAT && ! defined _GLIBCXX_FILESYSTEM_IS_WINDOWS
+@@ -492,6 +493,7 @@ _GLIBCXX_BEGIN_NAMESPACE_FILESYSTEM
+ 	ec.assign(errno, std::generic_category());
+ 	return false;
+       }
++#endif
+ 
+     size_t count = from_st->st_size;
+ #if defined _GLIBCXX_USE_SENDFILE && ! defined _GLIBCXX_FILESYSTEM_IS_WINDOWS
+diff --git a/libstdc++-v3/src/filesystem/ops.cc b/libstdc++-v3/src/filesystem/ops.cc
+index 896a4918ace..59a155b840e 100644
+--- a/libstdc++-v3/src/filesystem/ops.cc
++++ b/libstdc++-v3/src/filesystem/ops.cc
+@@ -971,6 +971,7 @@ fs::permissions(const path& p, perms prms, error_code& ec) noexcept
+     }
+ 
+   int err = 0;
++#ifndef __DEVKITPPC__
+ #if _GLIBCXX_USE_FCHMODAT
+   const int flag = (nofollow && is_symlink(st)) ? AT_SYMLINK_NOFOLLOW : 0;
+   if (::fchmodat(AT_FDCWD, p.c_str(), static_cast<mode_t>(prms), flag))
+@@ -980,6 +981,7 @@ fs::permissions(const path& p, perms prms, error_code& ec) noexcept
+     ec = std::__unsupported();
+   else if (posix::chmod(p.c_str(), static_cast<mode_t>(prms)))
+     err = errno;
++#endif
+ #endif
+ 
+   if (err)

dkppc/patches/gcc-13.1.0.patch

@@ -0,0 +1,976 @@
+diff --git a/config/gthr.m4 b/config/gthr.m4
+index 11996247f15..f21b315ce8a 100644
+--- a/config/gthr.m4
++++ b/config/gthr.m4
+@@ -13,6 +13,7 @@ AC_DEFUN([GCC_AC_THREAD_HEADER],
+ case $1 in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/gcc/config/newlib-stdint.h b/gcc/config/newlib-stdint.h
+index 98bc77b46b8..4f1690d4f4d 100644
+--- a/gcc/config/newlib-stdint.h
++++ b/gcc/config/newlib-stdint.h
+@@ -25,7 +25,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ /* newlib uses 32-bit long in certain cases for all non-SPU
+    targets.  */
+ #ifndef STDINT_LONG32
+-#define STDINT_LONG32 (LONG_TYPE_SIZE == 32)
++#define STDINT_LONG32 0
+ #endif
+ 
+ #define SIG_ATOMIC_TYPE "int"
+diff --git a/gcc/config/rs6000/eabi.h b/gcc/config/rs6000/eabi.h
+index 5bfc377e0de..342ed1932b9 100644
+--- a/gcc/config/rs6000/eabi.h
++++ b/gcc/config/rs6000/eabi.h
+@@ -36,6 +36,8 @@
+       builtin_assert ("system=embedded"); \
+       builtin_assert ("cpu=powerpc");     \
+       builtin_assert ("machine=powerpc"); \
++      builtin_define ("__DEVKITPPC__");   \
++      builtin_define ("__DEVKITPRO__");   \
+       TARGET_OS_SYSV_CPP_BUILTINS ();     \
+     }                                     \
+   while (0)
+diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
+index 3503614efbd..b0a1b8e4ad7 100644
+--- a/gcc/config/rs6000/rs6000.h
++++ b/gcc/config/rs6000/rs6000.h
+@@ -199,6 +199,7 @@ ASM_OPT_ANY
+ /* -mcpu=native handling only makes sense with compiler running on
+    an PowerPC chip.  If changing this condition, also change
+    the condition in driver-rs6000.cc.  */
++#if 0
+ #if defined(__powerpc__) || defined(__POWERPC__) || defined(_AIX)
+ /* In driver-rs6000.cc.  */
+ extern const char *host_detect_local_cpu (int argc, const char **argv);
+@@ -210,6 +211,8 @@ extern const char *host_detect_local_cpu (int argc, const char **argv);
+ #else
+ #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ #endif
++#endif
++#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ 
+ #ifndef CC1_CPU_SPEC
+ #ifdef HAVE_LOCAL_CPU_DETECT
+diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
+index ae932fc22f0..527b48878b8 100644
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -581,7 +581,11 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Default starting address if specified.  */
+ #define LINK_START_SPEC "\
+-%{mads         : %(link_start_ads)         ; \
++%{mgcn|mogc    : %(link_start_ogc)         ; \
++  mvgc         : %(link_start_vgc)         ; \
++  mgcbios      : %(link_start_gcb)         ; \
++  mrvl         : %(link_start_rvl)         ; \
++  mads         : %(link_start_ads)         ; \
+   myellowknife : %(link_start_yellowknife) ; \
+   mmvme        : %(link_start_mvme)        ; \
+   msim         : %(link_start_sim)         ; \
+@@ -612,7 +616,8 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Any specific OS flags.  */
+ #define LINK_OS_SPEC "\
+-%{mads         : %(link_os_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
++  mads         : %(link_os_ads)         ; \
+   myellowknife : %(link_os_yellowknife) ; \
+   mmvme        : %(link_os_mvme)        ; \
+   msim         : %(link_os_sim)         ; \
+@@ -627,7 +632,10 @@ GNU_USER_TARGET_CC1_SPEC
+ /* Override rs6000.h definition.  */
+ #undef	CPP_SPEC
+ #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
+-%{mads         : %(cpp_os_ads)         ; \
++%{mgcn         : %(cpp_os_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
++  mrvl         : %(cpp_os_rvl)         ; \
++  mads         : %(cpp_os_ads)         ; \
+   myellowknife : %(cpp_os_yellowknife) ; \
+   mmvme        : %(cpp_os_mvme)        ; \
+   msim         : %(cpp_os_sim)         ; \
+@@ -641,7 +649,10 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ #undef	STARTFILE_SPEC
+ #define	STARTFILE_SPEC "\
+-%{mads         : %(startfile_ads)         ; \
++%{mgcn         : %(startfile_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
++  mrvl         : %(startfile_ogc)         ; \
++  mads         : %(startfile_ads)         ; \
+   myellowknife : %(startfile_yellowknife) ; \
+   mmvme        : %(startfile_mvme)        ; \
+   msim         : %(startfile_sim)         ; \
+@@ -655,7 +666,8 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ #undef	LIB_SPEC
+ #define	LIB_SPEC "\
+-%{mads         : %(lib_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
++  mads         : %(lib_ads)         ; \
+   myellowknife : %(lib_yellowknife) ; \
+   mmvme        : %(lib_mvme)        ; \
+   msim         : %(lib_sim)         ; \
+@@ -665,11 +677,12 @@ GNU_USER_TARGET_CC1_SPEC
+   mcall-openbsd: %(lib_openbsd)     ; \
+                : %(lib_default)     }"
+ 
+-#define LIB_DEFAULT_SPEC "-lc"
++#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #undef	ENDFILE_SPEC
+ #define	ENDFILE_SPEC "\
+-%{mads         : %(endfile_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
++  mads         : %(endfile_ads)         ; \
+   myellowknife : %(endfile_yellowknife) ; \
+   mmvme        : %(endfile_mvme)        ; \
+   msim         : %(endfile_sim)         ; \
+@@ -685,16 +698,27 @@ GNU_USER_TARGET_CC1_SPEC
+ 
+ /* Motorola ADS support.  */
+ #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
++#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
++#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
+ 
+ #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
+ 
+ #define LINK_START_ADS_SPEC "-T ads.ld%s"
++#define LINK_START_OGC_SPEC "-T ogc.ld%s"
++#define LINK_START_RVL_SPEC "-T rvl.ld%s"
++#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
++#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
+ 
+ #define LINK_OS_ADS_SPEC ""
++#define LINK_OS_OGC_SPEC "--gc-sections"
+ 
+ #define CPP_OS_ADS_SPEC ""
++#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
++#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
++#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
+ 
+ /* Motorola Yellowknife support.  */
+ #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
+@@ -842,6 +866,7 @@ ncrtn.o%s"
+ #undef	SUBTARGET_EXTRA_SPECS
+ #define	SUBTARGET_EXTRA_SPECS						\
+   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
++  { "lib_ogc",			LIB_OGC_SPEC },				\
+   { "lib_ads",			LIB_ADS_SPEC },				\
+   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
+   { "lib_mvme",			LIB_MVME_SPEC },			\
+@@ -851,6 +876,7 @@ ncrtn.o%s"
+   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
+   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
+   { "lib_default",		LIB_DEFAULT_SPEC },			\
++  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
+   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
+   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
+   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
+@@ -860,6 +886,7 @@ ncrtn.o%s"
+   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
+   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
+   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
++  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
+   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
+   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
+   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
+@@ -871,7 +898,11 @@ ncrtn.o%s"
+   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
+   { "link_shlib",		LINK_SHLIB_SPEC },			\
+   { "link_start",		LINK_START_SPEC },			\
++  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
++  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
++  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
+   { "link_start_ads",		LINK_START_ADS_SPEC },			\
++  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
+   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
+   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
+   { "link_start_sim",		LINK_START_SIM_SPEC },			\
+@@ -881,6 +912,7 @@ ncrtn.o%s"
+   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
+   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
+   { "link_os",			LINK_OS_SPEC },				\
++  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
+   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
+   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
+   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
+@@ -892,6 +924,9 @@ ncrtn.o%s"
+   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
+   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
+   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
++  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
++  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
++  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
+   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
+   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
+   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
+diff --git a/gcc/config/rs6000/sysv4.opt b/gcc/config/rs6000/sysv4.opt
+index 691e0d3d2e8..2eb60bc56b6 100644
+--- a/gcc/config/rs6000/sysv4.opt
++++ b/gcc/config/rs6000/sysv4.opt
+@@ -124,6 +124,26 @@ mads
+ Target RejectNegative
+ Link with libads.a, libc.a and crt0.o.
+ 
++mgcn
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mogc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mgcbios
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mvgc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mrvl
++Target RejectNegative
++Link with libsysbase.a and libc.a, use rvl linker script 
++
+ myellowknife
+ Target RejectNegative
+ Link with libyk.a, libc.a and crt0.o.
+diff --git a/gcc/configure b/gcc/configure
+index c7b26d1927d..d1e32ef9ec5 100755
+--- a/gcc/configure
++++ b/gcc/configure
+@@ -13011,7 +13011,7 @@ case ${enable_threads} in
+     # default
+     target_thread_file='single'
+     ;;
+-  aix | dce | lynx | mipssde | posix | rtems | \
++  aix | dce | dkp | lynx | mipssde | posix | rtems | \
+   single | tpf | vxworks | win32 | mcf)
+     target_thread_file=${enable_threads}
+     ;;
+diff --git a/gcc/configure.ac b/gcc/configure.ac
+index 09082e8ccae..f5700df9455 100644
+--- a/gcc/configure.ac
++++ b/gcc/configure.ac
+@@ -2020,7 +2020,7 @@ case ${enable_threads} in
+     # default
+     target_thread_file='single'
+     ;;
+-  aix | dce | lynx | mipssde | posix | rtems | \
++  aix | dce | dkp | lynx | mipssde | posix | rtems | \
+   single | tpf | vxworks | win32 | mcf)
+     target_thread_file=${enable_threads}
+     ;;
+diff --git a/libgcc/config/rs6000/crtrestvr.S b/libgcc/config/rs6000/crtrestvr.S
+index cf7f71ae123..7e0892a845f 100644
+--- a/libgcc/config/rs6000/crtrestvr.S
++++ b/libgcc/config/rs6000/crtrestvr.S
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -86,3 +86,4 @@ FUNC_END(_restvr_20)
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff --git a/libgcc/config/rs6000/crtsavevr.S b/libgcc/config/rs6000/crtsavevr.S
+index 19de2128714..d116593062d 100644
+--- a/libgcc/config/rs6000/crtsavevr.S
++++ b/libgcc/config/rs6000/crtsavevr.S
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -86,3 +86,4 @@ FUNC_END(_savevr_20)
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff --git a/libgcc/config/rs6000/gthr-dkp.c b/libgcc/config/rs6000/gthr-dkp.c
+new file mode 100644
+index 00000000000..26180aa7f36
+--- /dev/null
++++ b/libgcc/config/rs6000/gthr-dkp.c
+@@ -0,0 +1,319 @@
++/* Threads compatibility routines for libgcc2 and libobjc.  */
++/* Compile this one with gcc.  */
++/* Copyright (C) 1997-2016 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++Under Section 7 of GPL version 3, you are granted additional
++permissions described in the GCC Runtime Library Exception, version
++3.1, as published by the Free Software Foundation.
++
++You should have received a copy of the GNU General Public License and
++a copy of the GCC Runtime Library Exception along with this program;
++see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++<http://www.gnu.org/licenses/>.  */
++
++#define _BUILDING_LIBGCC
++#include "gthr-dkp.h"
++#include <stddef.h>
++
++
++int
++__gthread_active_p (void)
++{
++  if (!__has_gthr_impl(active)) {
++    return 0;
++  }
++
++  return __gthr_impl_active();
++}
++
++int
++__gthread_create (__gthread_t *__threadid, void *(*__func) (void*),
++                  void *__args)
++{
++  if (!__has_gthr_impl(create)) {
++    return -1;
++  }
++
++  return __gthr_impl_create(__threadid, __func, __args);
++}
++
++int
++__gthread_join (__gthread_t __threadid, void **__value_ptr)
++{
++  if (!__has_gthr_impl(join)) {
++    return -1;
++  }
++
++  return __gthr_impl_join(__threadid, __value_ptr);
++}
++
++int
++__gthread_detach (__gthread_t __threadid)
++{
++  if (!__has_gthr_impl(detach)) {
++    return -1;
++  }
++
++  return __gthr_impl_detach(__threadid);
++}
++
++int
++__gthread_equal (__gthread_t __t1, __gthread_t __t2)
++{
++  if (!__has_gthr_impl(equal)) {
++    return -1;
++  }
++
++  return __gthr_impl_equal(__t1, __t2);
++}
++
++__gthread_t
++__gthread_self (void)
++{
++  if (!__has_gthr_impl(self)) {
++    __gthread_t result = { 0 };
++    return result;
++  }
++
++  return __gthr_impl_self();
++}
++
++int
++__gthread_yield (void)
++{
++  if (!__has_gthr_impl(yield)) {
++    return -1;
++  }
++
++  return __gthr_impl_yield();
++}
++
++int
++__gthread_once (__gthread_once_t *__once, void (*__func) (void))
++{
++  if (!__has_gthr_impl(once)) {
++    return -1;
++  }
++
++  return __gthr_impl_once(__once, __func);
++}
++
++int
++__gthread_key_create (__gthread_key_t *__key, void (*__dtor) (void *))
++{
++  if (!__has_gthr_impl(key_create)) {
++    return -1;
++  }
++
++  return __gthr_impl_key_create(__key, __dtor);
++}
++
++int
++__gthread_key_delete (__gthread_key_t __key)
++{
++  if (!__has_gthr_impl(key_delete)) {
++    return -1;
++  }
++
++  return __gthr_impl_key_delete(__key);
++}
++
++void *
++__gthread_getspecific (__gthread_key_t __key)
++{
++  if (!__has_gthr_impl(getspecific)) {
++    return NULL;
++  }
++
++  return __gthr_impl_getspecific(__key);
++}
++
++int
++__gthread_setspecific (__gthread_key_t __key, const void *__ptr)
++{
++  if (!__has_gthr_impl(setspecific)) {
++    return -1;
++  }
++
++  return __gthr_impl_setspecific(__key, __ptr);
++}
++
++void
++__gthread_mutex_init_function (__gthread_mutex_t *__mutex)
++{
++  if (__has_gthr_impl(mutex_init_function)) {
++    __gthr_impl_mutex_init_function(__mutex);
++  }
++}
++
++int
++__gthread_mutex_destroy (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_destroy(__mutex);
++}
++
++int
++__gthread_mutex_lock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_lock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_lock(__mutex);
++}
++
++int
++__gthread_mutex_trylock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_trylock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_trylock(__mutex);
++}
++
++int
++__gthread_mutex_unlock (__gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(mutex_unlock)) {
++    return -1;
++  }
++
++  return __gthr_impl_mutex_unlock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_init_function (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_init_function)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_init_function(__mutex);
++}
++
++int
++__gthread_recursive_mutex_lock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_lock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_lock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_trylock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_trylock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_trylock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_unlock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_unlock)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_unlock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_destroy (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(recursive_mutex_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_recursive_mutex_destroy(__mutex);
++}
++
++void
++__gthread_cond_init_function (__gthread_cond_t *__cond)
++{
++  if (__has_gthr_impl(cond_init_function)) {
++    __gthr_impl_cond_init_function(__cond);
++  }
++}
++
++int
++__gthread_cond_broadcast (__gthread_cond_t *__cond)
++{
++  if (!__has_gthr_impl(cond_broadcast)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_broadcast(__cond);
++}
++
++int
++__gthread_cond_signal (__gthread_cond_t *__cond)
++{
++  if (!__has_gthr_impl(cond_signal)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_signal(__cond);
++}
++
++int
++__gthread_cond_wait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(cond_wait)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_wait(__cond, __mutex);
++}
++
++int
++__gthread_cond_timedwait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                          const __gthread_time_t *__abs_timeout)
++{
++  if (!__has_gthr_impl(cond_timedwait)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_timedwait(__cond, __mutex, __abs_timeout);
++}
++
++int
++__gthread_cond_wait_recursive (__gthread_cond_t *__cond,
++                               __gthread_recursive_mutex_t *__mutex)
++{
++  if (!__has_gthr_impl(cond_wait_recursive)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_wait_recursive(__cond, __mutex);
++}
++
++int
++__gthread_cond_destroy (__gthread_cond_t* __cond)
++{
++  if (!__has_gthr_impl(cond_destroy)) {
++    return -1;
++  }
++
++  return __gthr_impl_cond_destroy(__cond);
++}
+diff --git a/libgcc/config/rs6000/gthr-dkp.h b/libgcc/config/rs6000/gthr-dkp.h
+new file mode 100644
+index 00000000000..72ecf82ab83
+--- /dev/null
++++ b/libgcc/config/rs6000/gthr-dkp.h
+@@ -0,0 +1,187 @@
++/* Threads compatibility routines for libgcc2 and libobjc.  */
++/* Compile this one with gcc.  */
++/* Copyright (C) 1997-2016 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++Under Section 7 of GPL version 3, you are granted additional
++permissions described in the GCC Runtime Library Exception, version
++3.1, as published by the Free Software Foundation.
++
++You should have received a copy of the GNU General Public License and
++a copy of the GCC Runtime Library Exception along with this program;
++see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++<http://www.gnu.org/licenses/>.  */
++
++#ifndef _GLIBCXX_GCC_GTHR_DKP_H
++#define _GLIBCXX_GCC_GTHR_DKP_H
++
++#define __GTHREADS 1
++#define __GTHREADS_CXX0X 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef void *                      __gthread_t;
++typedef struct { int padding[7]; }  __gthread_cond_t;
++typedef struct { int padding; }     __gthread_key_t;
++typedef struct { int padding[11]; } __gthread_mutex_t;
++typedef struct { int padding; }     __gthread_once_t;
++typedef struct { int padding[11]; } __gthread_recursive_mutex_t;
++typedef struct timespec             __gthread_time_t;
++
++#define __GTHREAD_HAS_COND 1
++#define _GTHREAD_USE_MUTEX_TIMEDLOCK 0
++
++#define __GTHREAD_ONCE_INIT { 0 }
++#define __GTHREAD_TIME_INIT { 0, 0 }
++
++#define __GTHREAD_COND_INIT_FUNCTION __gthread_cond_init_function
++#define __GTHREAD_MUTEX_INIT_FUNCTION __gthread_mutex_init_function
++#define __GTHREAD_RECURSIVE_MUTEX_INIT_FUNCTION __gthread_recursive_mutex_init_function
++
++#ifdef _BUILDING_LIBGCC
++#define __GTHR_IMPL(_name) __attribute__((weak)) __gthr_impl_##_name
++#define __has_gthr_impl(_name) (&__gthr_impl_##_name)
++#else
++#define __GTHR_IMPL(_name) __gthr_impl_##_name
++#endif
++
++int __GTHR_IMPL(active) (void);
++int __GTHR_IMPL(create) (__gthread_t *__threadid, void *(*__func) (void*), void *__args);
++int __GTHR_IMPL(join) (__gthread_t __threadid, void **__value_ptr);
++int __GTHR_IMPL(detach) (__gthread_t __threadid);
++int __GTHR_IMPL(equal) (__gthread_t __t1, __gthread_t __t2);
++__gthread_t __GTHR_IMPL(self) (void);
++int __GTHR_IMPL(yield) (void);
++int __GTHR_IMPL(once) (__gthread_once_t *__once, void (*__func) (void));
++int __GTHR_IMPL(key_create) (__gthread_key_t *__key, void (*__dtor) (void *));
++int __GTHR_IMPL(key_delete) (__gthread_key_t __key);
++void * __GTHR_IMPL(getspecific) (__gthread_key_t __key);
++int __GTHR_IMPL(setspecific) (__gthread_key_t __key, const void *__ptr);
++void __GTHR_IMPL(mutex_init_function) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_destroy) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_lock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_trylock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(mutex_unlock) (__gthread_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_init_function) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_lock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_trylock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_unlock) (__gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(recursive_mutex_destroy) (__gthread_recursive_mutex_t *__mutex);
++void __GTHR_IMPL(cond_init_function) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_broadcast) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_signal) (__gthread_cond_t *__cond);
++int __GTHR_IMPL(cond_wait) (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex);
++int __GTHR_IMPL(cond_timedwait) (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                         const __gthread_time_t *__abs_timeout);
++int __GTHR_IMPL(cond_wait_recursive) (__gthread_cond_t *__cond,
++                              __gthread_recursive_mutex_t *__mutex);
++int __GTHR_IMPL(cond_destroy) (__gthread_cond_t* __cond);
++
++int
++__gthread_active_p (void);
++
++int
++__gthread_create (__gthread_t *__threadid, void *(*__func) (void*),
++                  void *__args);
++
++int
++__gthread_join (__gthread_t __threadid, void **__value_ptr);
++
++int
++__gthread_detach (__gthread_t __threadid);
++
++int
++__gthread_equal (__gthread_t __t1, __gthread_t __t2);
++
++__gthread_t
++__gthread_self (void);
++
++int
++__gthread_yield (void);
++
++int
++__gthread_once (__gthread_once_t *__once, void (*__func) (void));
++
++int
++__gthread_key_create (__gthread_key_t *__key, void (*__dtor) (void *));
++
++int
++__gthread_key_delete (__gthread_key_t __key);
++
++void *
++__gthread_getspecific (__gthread_key_t __key);
++
++int
++__gthread_setspecific (__gthread_key_t __key, const void *__ptr);
++
++void
++__gthread_mutex_init_function (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_destroy (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_lock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_trylock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_unlock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_init_function (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_lock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_trylock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_unlock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_destroy (__gthread_recursive_mutex_t *__mutex);
++
++void
++__gthread_cond_init_function (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_broadcast (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_signal (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_wait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex);
++
++int
++__gthread_cond_timedwait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                          const __gthread_time_t *__abs_timeout);
++
++int
++__gthread_cond_wait_recursive (__gthread_cond_t *__cond,
++                               __gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_cond_destroy (__gthread_cond_t* __cond);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* ! _GLIBCXX_GCC_GTHR_DKP_H */
+diff --git a/libgcc/config/rs6000/t-ppccomm b/libgcc/config/rs6000/t-ppccomm
+index fb812d3801f..7f6669d530f 100644
+--- a/libgcc/config/rs6000/t-ppccomm
++++ b/libgcc/config/rs6000/t-ppccomm
+@@ -1,4 +1,5 @@
+ LIB2ADD += $(srcdir)/config/rs6000/ibm-ldouble.c \
++	   $(srcdir)/config/rs6000/gthr-dkp.c \
+ 	   $(srcdir)/config/rs6000/tramp.S
+ 
+ # This can't end up in shared libgcc
+diff --git a/libgcc/configure b/libgcc/configure
+index be5d45f1755..5c5aa253655 100755
+--- a/libgcc/configure
++++ b/libgcc/configure
+@@ -5690,6 +5690,7 @@ tm_file="${tm_file_}"
+ case $target_thread_file in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index 93ff5b81dc5..20c0fe89a28 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -326,7 +326,7 @@ register_tm_clones (void)
+ 
+ #ifdef OBJECT_FORMAT_ELF
+ 
+-#if DEFAULT_USE_CXA_ATEXIT
++#if 1 /* DEFAULT_USE_CXA_ATEXIT */
+ /* Declare the __dso_handle variable.  It should have a unique value
+    in every shared-object; in a main program its value is zero.  The
+    object should in any case be protected.  This means the instance
+diff --git a/libstdc++-v3/configure b/libstdc++-v3/configure
+index 68ee94c9e28..1e17f789b89 100755
+--- a/libstdc++-v3/configure
++++ b/libstdc++-v3/configure
+@@ -15800,6 +15800,7 @@ $as_echo "$target_thread_file" >&6; }
+ case $target_thread_file in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
++    dkp)        thread_header=config/rs6000/gthr-dkp.h ;;
+     gcn)	thread_header=config/gcn/gthr-gcn.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/libstdc++-v3/include/std/fstream b/libstdc++-v3/include/std/fstream
+index 3dff4e5e74e..7835a727321 100644
+--- a/libstdc++-v3/include/std/fstream
++++ b/libstdc++-v3/include/std/fstream
+@@ -48,7 +48,7 @@
+ 
+ // This can be overridden by the target's os_defines.h
+ #ifndef _GLIBCXX_BUFSIZ
+-# define _GLIBCXX_BUFSIZ BUFSIZ
++# define _GLIBCXX_BUFSIZ (BUFSIZ+1)
+ #endif
+ 
+ namespace std _GLIBCXX_VISIBILITY(default)
+diff --git a/libstdc++-v3/libsupc++/eh_alloc.cc b/libstdc++-v3/libsupc++/eh_alloc.cc
+index 8380052c9f3..100de070f20 100644
+--- a/libstdc++-v3/libsupc++/eh_alloc.cc
++++ b/libstdc++-v3/libsupc++/eh_alloc.cc
+@@ -143,6 +143,7 @@ namespace
+     {
+     public:
+       pool() noexcept;
++      ~pool();
+ 
+       _GLIBCXX_NODISCARD void *allocate (std::size_t) noexcept;
+       void free (void *) noexcept;
+@@ -248,6 +249,15 @@ namespace
+       first_free_entry->next = NULL;
+     }
+ 
++  pool::~pool()
++    {
++      if (arena)
++        {
++          ::free(arena);
++          arena = 0;
++        }
++    }
++
+   void *pool::allocate (std::size_t size) noexcept
+     {
+       __scoped_lock sentry(emergency_mutex);
+diff --git a/libstdc++-v3/src/c++17/fs_ops.cc b/libstdc++-v3/src/c++17/fs_ops.cc
+index c94d260632f..74c7a06a90d 100644
+--- a/libstdc++-v3/src/c++17/fs_ops.cc
++++ b/libstdc++-v3/src/c++17/fs_ops.cc
+@@ -1124,6 +1124,7 @@ fs::permissions(const path& p, perms prms, perm_options opts,
+     }
+ 
+   int err = 0;
++#ifndef __DEVKITPPC__
+ #if _GLIBCXX_USE_FCHMODAT
+   const int flag = (nofollow && is_symlink(st)) ? AT_SYMLINK_NOFOLLOW : 0;
+   if (::fchmodat(AT_FDCWD, p.c_str(), static_cast<mode_t>(prms), flag))
+@@ -1133,6 +1134,7 @@ fs::permissions(const path& p, perms prms, perm_options opts,
+     ec = std::__unsupported();
+   else if (posix::chmod(p.c_str(), static_cast<posix::mode_t>(prms)))
+     err = errno;
++#endif
+ #endif
+ 
+   if (err)
+diff --git a/libstdc++-v3/src/filesystem/ops-common.h b/libstdc++-v3/src/filesystem/ops-common.h
+index c95511b5c95..f9be4529bb2 100644
+--- a/libstdc++-v3/src/filesystem/ops-common.h
++++ b/libstdc++-v3/src/filesystem/ops-common.h
+@@ -486,6 +486,7 @@ _GLIBCXX_BEGIN_NAMESPACE_FILESYSTEM
+ 	return false;
+       }
+ 
++#ifndef __DEVKITPPC__
+ #if defined _GLIBCXX_USE_FCHMOD && ! defined _GLIBCXX_FILESYSTEM_IS_WINDOWS
+     if (::fchmod(out.fd, from_st->st_mode))
+ #elif defined _GLIBCXX_USE_FCHMODAT && ! defined _GLIBCXX_FILESYSTEM_IS_WINDOWS
+@@ -497,6 +498,7 @@ _GLIBCXX_BEGIN_NAMESPACE_FILESYSTEM
+ 	ec.assign(errno, std::generic_category());
+ 	return false;
+       }
++#endif
+ 
+     size_t count = from_st->st_size;
+ #if defined _GLIBCXX_USE_SENDFILE && ! defined _GLIBCXX_FILESYSTEM_IS_WINDOWS
+diff --git a/libstdc++-v3/src/filesystem/ops.cc b/libstdc++-v3/src/filesystem/ops.cc
+index d33c13d7f15..7c343cdc30e 100644
+--- a/libstdc++-v3/src/filesystem/ops.cc
++++ b/libstdc++-v3/src/filesystem/ops.cc
+@@ -972,6 +972,7 @@ fs::permissions(const path& p, perms prms, error_code& ec) noexcept
+     }
+ 
+   int err = 0;
++#ifndef __DEVKITPPC__
+ #if _GLIBCXX_USE_FCHMODAT
+   const int flag = (nofollow && is_symlink(st)) ? AT_SYMLINK_NOFOLLOW : 0;
+   if (::fchmodat(AT_FDCWD, p.c_str(), static_cast<mode_t>(prms), flag))
+@@ -981,6 +982,7 @@ fs::permissions(const path& p, perms prms, error_code& ec) noexcept
+     ec = std::__unsupported();
+   else if (posix::chmod(p.c_str(), static_cast<mode_t>(prms)))
+     err = errno;
++#endif
+ #endif
+ 
+   if (err)

dkppc/patches/gcc-6.2.0.patch

@@ -1,330 +0,0 @@
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/rs6000.h gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h
---- gcc-6.1.0/gcc/config/rs6000/rs6000.h	2016-01-20 20:30:24.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h	2016-05-20 12:10:24.645019640 +0100
-@@ -205,6 +205,7 @@
-   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
-   SUBTARGET_EXTRA_SPECS
- 
-+#if 0
- /* -mcpu=native handling only makes sense with compiler running on
-    an PowerPC chip.  If changing this condition, also change
-    the condition in driver-rs6000.c.  */
-@@ -219,6 +220,8 @@
- #else
- #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- #endif
-+#endif
-+#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- 
- #ifndef CC1_CPU_SPEC
- #ifdef HAVE_LOCAL_CPU_DETECT
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.h gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h
---- gcc-6.1.0/gcc/config/rs6000/sysv4.h	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h	2016-05-20 12:12:27.073019640 +0100
-@@ -559,7 +559,12 @@
- 
- /* Default starting address if specified.  */
- #define LINK_START_SPEC "\
--%{mads         : %(link_start_ads)         ; \
-+%{mgcn|mogc    : %(link_start_ogc)         ; \
-+  mvgc         : %(link_start_vgc)         ; \
-+  mgcbios      : %(link_start_gcb)         ; \
-+  mrvl         : %(link_start_rvl)         ; \
-+  mwup         : %(link_start_wup)         ; \
-+  mads         : %(link_start_ads)         ; \
-   myellowknife : %(link_start_yellowknife) ; \
-   mmvme        : %(link_start_mvme)        ; \
-   msim         : %(link_start_sim)         ; \
-@@ -590,7 +594,9 @@
- 
- /* Any specific OS flags.  */
- #define LINK_OS_SPEC "\
--%{mads         : %(link_os_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
-+  mwup         : %(link_os_wup)         ; \
-+  mads         : %(link_os_ads)         ; \
-   myellowknife : %(link_os_yellowknife) ; \
-   mmvme        : %(link_os_mvme)        ; \
-   msim         : %(link_os_sim)         ; \
-@@ -608,7 +613,11 @@
- /* Override rs6000.h definition.  */
- #undef	CPP_SPEC
- #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
--%{mads         : %(cpp_os_ads)         ; \
-+%{mgcn         : %(cpp_os_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
-+  mrvl         : %(cpp_os_rvl)         ; \
-+  mwup         : %(cpp_os_wup)         ; \
-+  mads         : %(cpp_os_ads)         ; \
-   myellowknife : %(cpp_os_yellowknife) ; \
-   mmvme        : %(cpp_os_mvme)        ; \
-   msim         : %(cpp_os_sim)         ; \
-@@ -622,7 +630,11 @@
- 
- #undef	STARTFILE_SPEC
- #define	STARTFILE_SPEC "\
--%{mads         : %(startfile_ads)         ; \
-+%{mgcn         : %(startfile_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
-+  mrvl         : %(startfile_ogc)         ; \
-+  mwup         : %(startfile_wup)         ; \
-+  mads         : %(startfile_ads)         ; \
-   myellowknife : %(startfile_yellowknife) ; \
-   mmvme        : %(startfile_mvme)        ; \
-   msim         : %(startfile_sim)         ; \
-@@ -632,11 +643,13 @@
-   mcall-openbsd: %(startfile_openbsd)     ; \
-                : %(startfile_default)     }"
- 
--#define	STARTFILE_DEFAULT_SPEC "ecrti.o%s crtbegin.o%s"
-+#define	STARTFILE_DEFAULT_SPEC "crt0.o%s ecrti.o%s crtbegin.o%s"
- 
- #undef	LIB_SPEC
- #define	LIB_SPEC "\
--%{mads         : %(lib_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
-+  mwup         : %(lib_wup)         ; \
-+  mads         : %(lib_ads)         ; \
-   myellowknife : %(lib_yellowknife) ; \
-   mmvme        : %(lib_mvme)        ; \
-   msim         : %(lib_sim)         ; \
-@@ -646,11 +658,13 @@
-   mcall-openbsd: %(lib_openbsd)     ; \
-                : %(lib_default)     }"
- 
--#define LIB_DEFAULT_SPEC "-lc"
-+#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #undef	ENDFILE_SPEC
- #define	ENDFILE_SPEC "\
--%{mads         : %(endfile_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
-+  mwup         : %(endfile_wup)         ; \
-+  mads         : %(endfile_ads)         ; \
-   myellowknife : %(endfile_yellowknife) ; \
-   mmvme        : %(endfile_mvme)        ; \
-   msim         : %(endfile_sim)         ; \
-@@ -666,16 +679,33 @@
- 
- /* Motorola ADS support.  */
- #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
-+#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
-+#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
-+#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
-+#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
- 
- #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
- 
- #define LINK_START_ADS_SPEC "-T ads.ld%s"
-+#define LINK_START_OGC_SPEC "-T ogc.ld%s"
-+#define LINK_START_RVL_SPEC "-T rvl.ld%s"
-+#define LINK_START_WUP_SPEC "-T wup.ld%s"
-+#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
-+#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
- 
- #define LINK_OS_ADS_SPEC ""
-+#define LINK_OS_OGC_SPEC "--gc-sections"
-+#define LINK_OS_WUP_SPEC "--gc-sections"
- 
- #define CPP_OS_ADS_SPEC ""
-+#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
-+#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
-+#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
-+#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
- 
- /* Motorola Yellowknife support.  */
- #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -855,6 +879,8 @@
- #undef	SUBTARGET_EXTRA_SPECS
- #define	SUBTARGET_EXTRA_SPECS						\
-   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
-+  { "lib_ogc",			LIB_OGC_SPEC },				\
-+  { "lib_wup",			LIB_WUP_SPEC },	                        \
-   { "lib_ads",			LIB_ADS_SPEC },				\
-   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
-   { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -864,6 +889,8 @@
-   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
-   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
-   { "lib_default",		LIB_DEFAULT_SPEC },			\
-+  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
-+  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
-   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
-   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
-   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -873,6 +899,8 @@
-   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
-   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
-   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
-+  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
-+  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
-   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
-   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
-   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -884,7 +911,12 @@
-   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
-   { "link_shlib",		LINK_SHLIB_SPEC },			\
-   { "link_start",		LINK_START_SPEC },			\
-+  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
-+  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
-+  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
-+  { "link_start_wup",		LINK_START_WUP_SPEC },			\
-   { "link_start_ads",		LINK_START_ADS_SPEC },			\
-+  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
-   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
-   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
-   { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -894,6 +925,8 @@
-   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
-   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
-   { "link_os",			LINK_OS_SPEC },				\
-+  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
-+  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
-   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
-   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
-   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -905,6 +937,10 @@
-   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
-   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
-   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
-+  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
-+  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
-+  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
-+  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
-   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
-   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
-   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.opt gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-6.1.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt	2016-05-20 12:10:24.649019640 +0100
-@@ -120,6 +120,30 @@
- Target RejectNegative
- Link with libads.a, libc.a and crt0.o.
- 
-+mgcn
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mogc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mgcbios
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mvgc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mrvl
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use rvl linker script 
-+
-+mwup
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use wup linker script 
-+
- myellowknife
- Target RejectNegative
- Link with libyk.a, libc.a and crt0.o.
-diff -NBaur gcc-6.1.0/gcc/config.gcc gcc-6.1.0-ppc/gcc/config.gcc
---- gcc-6.1.0/gcc/config.gcc	2016-04-11 11:14:59.000000000 +0100
-+++ gcc-6.1.0-ppc/gcc/config.gcc	2016-05-20 12:10:24.661019640 +0100
-@@ -2381,7 +2381,7 @@
- 	use_gcc_stdint=wrap
- 	;;
- powerpc-*-eabi*)
--	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
-+	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
- 	extra_options="${extra_options} rs6000/sysv4.opt"
- 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- 	use_gcc_stdint=wrap
-diff -NBaur gcc-6.1.0/gcc/Makefile.in gcc-6.1.0-ppc/gcc/Makefile.in
---- gcc-6.1.0/gcc/Makefile.in	2016-04-15 12:49:39.000000000 +0100
-+++ gcc-6.1.0-ppc/gcc/Makefile.in	2016-05-20 12:10:24.641019640 +0100
-@@ -1073,8 +1073,8 @@
- # things like the go/%.o rule work properly; but we use $(*F) for the
- # file part, as we just want the file part of the stem, not the entire
- # file name.
--COMPILE = $(COMPILE.base) -MT $@ -MMD -MP -MF $(@D)/$(DEPDIR)/$(*F).TPo
--POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(*F).TPo $(@D)/$(DEPDIR)/$(*F).Po
-+COMPILE = $(COMPILE.base)
-+POSTCOMPILE =
- else
- COMPILE = source='$<' object='$@' libtool=no \
-     DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.1.0/libcpp/Makefile.in gcc-6.1.0-ppc/libcpp/Makefile.in
---- gcc-6.1.0/libcpp/Makefile.in	2016-04-27 09:22:11.000000000 +0100
-+++ gcc-6.1.0-ppc/libcpp/Makefile.in	2016-05-20 12:10:24.661019640 +0100
-@@ -208,8 +208,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S
---- gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S	2016-05-20 12:10:24.665019640 +0100
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S
---- gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S	2016-05-20 12:10:24.665019640 +0100
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.1.0/libgcc/crtstuff.c gcc-6.1.0-ppc/libgcc/crtstuff.c
---- gcc-6.1.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/crtstuff.c	2016-05-20 12:10:24.669019640 +0100
-@@ -47,6 +47,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
-+#define USED_FOR_TARGET
- 
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-diff -NBaur gcc-6.1.0/libstdc++-v3/include/std/type_traits gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits
---- gcc-6.1.0/libstdc++-v3/include/std/type_traits	2016-01-12 21:19:58.000000000 +0000
-+++ gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits	2016-05-20 12:10:24.669019640 +0100
-@@ -38,7 +38,7 @@
- #include <bits/c++config.h>
- 
- #ifdef _GLIBCXX_USE_C99_STDINT_TR1
--# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__)
-+# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__) && 0
- namespace std
- {
-   typedef __UINT_LEAST16_TYPE__ uint_least16_t;

dkppc/patches/gcc-6.3.0.patch

@@ -1,313 +0,0 @@
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/rs6000.h gcc-6.3.0-ppc/gcc/config/rs6000/rs6000.h
---- gcc-6.3.0/gcc/config/rs6000/rs6000.h	2016-07-07 20:42:07.000000000 +0100
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/rs6000.h	2017-01-05 02:42:41.980000000 +0000
-@@ -205,6 +205,7 @@
-   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
-   SUBTARGET_EXTRA_SPECS
- 
-+#if 0
- /* -mcpu=native handling only makes sense with compiler running on
-    an PowerPC chip.  If changing this condition, also change
-    the condition in driver-rs6000.c.  */
-@@ -219,6 +220,8 @@
- #else
- #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- #endif
-+#endif
-+#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- 
- #ifndef CC1_CPU_SPEC
- #ifdef HAVE_LOCAL_CPU_DETECT
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.h
---- gcc-6.3.0/gcc/config/rs6000/sysv4.h	2016-05-16 14:47:47.000000000 +0100
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.h	2017-01-05 02:46:27.020000000 +0000
-@@ -559,7 +559,12 @@
- 
- /* Default starting address if specified.  */
- #define LINK_START_SPEC "\
--%{mads         : %(link_start_ads)         ; \
-+%{mgcn|mogc    : %(link_start_ogc)         ; \
-+  mvgc         : %(link_start_vgc)         ; \
-+  mgcbios      : %(link_start_gcb)         ; \
-+  mrvl         : %(link_start_rvl)         ; \
-+  mwup         : %(link_start_wup)         ; \
-+  mads         : %(link_start_ads)         ; \
-   myellowknife : %(link_start_yellowknife) ; \
-   mmvme        : %(link_start_mvme)        ; \
-   msim         : %(link_start_sim)         ; \
-@@ -590,7 +595,9 @@
- 
- /* Any specific OS flags.  */
- #define LINK_OS_SPEC "\
--%{mads         : %(link_os_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
-+  mwup         : %(link_os_wup)         ; \
-+  mads         : %(link_os_ads)         ; \
-   myellowknife : %(link_os_yellowknife) ; \
-   mmvme        : %(link_os_mvme)        ; \
-   msim         : %(link_os_sim)         ; \
-@@ -608,7 +615,11 @@
- /* Override rs6000.h definition.  */
- #undef	CPP_SPEC
- #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
--%{mads         : %(cpp_os_ads)         ; \
-+%{mgcn         : %(cpp_os_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
-+  mrvl         : %(cpp_os_rvl)         ; \
-+  mwup         : %(cpp_os_wup)         ; \
-+  mads         : %(cpp_os_ads)         ; \
-   myellowknife : %(cpp_os_yellowknife) ; \
-   mmvme        : %(cpp_os_mvme)        ; \
-   msim         : %(cpp_os_sim)         ; \
-@@ -622,7 +633,11 @@
- 
- #undef	STARTFILE_SPEC
- #define	STARTFILE_SPEC "\
--%{mads         : %(startfile_ads)         ; \
-+%{mgcn         : %(startfile_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
-+  mrvl         : %(startfile_ogc)         ; \
-+  mwup         : %(startfile_wup)         ; \
-+  mads         : %(startfile_ads)         ; \
-   myellowknife : %(startfile_yellowknife) ; \
-   mmvme        : %(startfile_mvme)        ; \
-   msim         : %(startfile_sim)         ; \
-@@ -636,7 +651,9 @@
- 
- #undef	LIB_SPEC
- #define	LIB_SPEC "\
--%{mads         : %(lib_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
-+  mwup         : %(lib_wup)         ; \
-+  mads         : %(lib_ads)         ; \
-   myellowknife : %(lib_yellowknife) ; \
-   mmvme        : %(lib_mvme)        ; \
-   msim         : %(lib_sim)         ; \
-@@ -646,11 +663,13 @@
-   mcall-openbsd: %(lib_openbsd)     ; \
-                : %(lib_default)     }"
- 
--#define LIB_DEFAULT_SPEC "-lc"
-+#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #undef	ENDFILE_SPEC
- #define	ENDFILE_SPEC "\
--%{mads         : %(endfile_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
-+  mwup         : %(endfile_wup)         ; \
-+  mads         : %(endfile_ads)         ; \
-   myellowknife : %(endfile_yellowknife) ; \
-   mmvme        : %(endfile_mvme)        ; \
-   msim         : %(endfile_sim)         ; \
-@@ -666,16 +685,33 @@
- 
- /* Motorola ADS support.  */
- #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
-+#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
-+#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
-+#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
-+#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
- 
- #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
- 
- #define LINK_START_ADS_SPEC "-T ads.ld%s"
-+#define LINK_START_OGC_SPEC "-T ogc.ld%s"
-+#define LINK_START_RVL_SPEC "-T rvl.ld%s"
-+#define LINK_START_WUP_SPEC "-T wup.ld%s"
-+#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
-+#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
- 
- #define LINK_OS_ADS_SPEC ""
-+#define LINK_OS_OGC_SPEC "--gc-sections"
-+#define LINK_OS_WUP_SPEC "--gc-sections"
- 
- #define CPP_OS_ADS_SPEC ""
-+#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
-+#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
-+#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
-+#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
- 
- /* Motorola Yellowknife support.  */
- #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -866,6 +902,8 @@
- #undef	SUBTARGET_EXTRA_SPECS
- #define	SUBTARGET_EXTRA_SPECS						\
-   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
-+  { "lib_ogc",			LIB_OGC_SPEC },				\
-+  { "lib_wup",			LIB_WUP_SPEC },	                        \
-   { "lib_ads",			LIB_ADS_SPEC },				\
-   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
-   { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -875,6 +913,8 @@
-   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
-   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
-   { "lib_default",		LIB_DEFAULT_SPEC },			\
-+  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
-+  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
-   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
-   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
-   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -884,6 +924,8 @@
-   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
-   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
-   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
-+  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
-+  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
-   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
-   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
-   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -895,7 +937,12 @@
-   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
-   { "link_shlib",		LINK_SHLIB_SPEC },			\
-   { "link_start",		LINK_START_SPEC },			\
-+  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
-+  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
-+  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
-+  { "link_start_wup",		LINK_START_WUP_SPEC },			\
-   { "link_start_ads",		LINK_START_ADS_SPEC },			\
-+  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
-   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
-   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
-   { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -905,6 +952,8 @@
-   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
-   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
-   { "link_os",			LINK_OS_SPEC },				\
-+  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
-+  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
-   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
-   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
-   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -916,6 +965,10 @@
-   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
-   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
-   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
-+  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
-+  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
-+  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
-+  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
-   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
-   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
-   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.opt gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-6.3.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.opt	2017-01-05 02:42:41.984000000 +0000
-@@ -120,6 +120,30 @@
- Target RejectNegative
- Link with libads.a, libc.a and crt0.o.
- 
-+mgcn
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mogc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mgcbios
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mvgc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mrvl
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use rvl linker script 
-+
-+mwup
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use wup linker script 
-+
- myellowknife
- Target RejectNegative
- Link with libyk.a, libc.a and crt0.o.
-diff -NBaur gcc-6.3.0/gcc/config.gcc gcc-6.3.0-ppc/gcc/config.gcc
---- gcc-6.3.0/gcc/config.gcc	2016-11-07 21:38:43.000000000 +0000
-+++ gcc-6.3.0-ppc/gcc/config.gcc	2017-01-05 02:42:41.984000000 +0000
-@@ -2390,7 +2390,7 @@
- 	use_gcc_stdint=wrap
- 	;;
- powerpc-*-eabi*)
--	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
-+	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
- 	extra_options="${extra_options} rs6000/sysv4.opt"
- 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- 	use_gcc_stdint=wrap
-diff -NBaur gcc-6.3.0/gcc/Makefile.in gcc-6.3.0-ppc/gcc/Makefile.in
---- gcc-6.3.0/gcc/Makefile.in	2016-11-22 17:33:07.000000000 +0000
-+++ gcc-6.3.0-ppc/gcc/Makefile.in	2017-01-05 02:42:41.988000000 +0000
-@@ -1073,8 +1073,8 @@
- # things like the go/%.o rule work properly; but we use $(*F) for the
- # file part, as we just want the file part of the stem, not the entire
- # file name.
--COMPILE = $(COMPILE.base) -MT $@ -MMD -MP -MF $(@D)/$(DEPDIR)/$(*F).TPo
--POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(*F).TPo $(@D)/$(DEPDIR)/$(*F).Po
-+COMPILE = $(COMPILE.base)
-+POSTCOMPILE =
- else
- COMPILE = source='$<' object='$@' libtool=no \
-     DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.3.0/libcpp/Makefile.in gcc-6.3.0-ppc/libcpp/Makefile.in
---- gcc-6.3.0/libcpp/Makefile.in	2016-12-21 07:53:39.000000000 +0000
-+++ gcc-6.3.0-ppc/libcpp/Makefile.in	2017-01-05 02:42:41.988000000 +0000
-@@ -208,8 +208,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S gcc-6.3.0-ppc/libgcc/config/rs6000/crtrestvr.S
---- gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/config/rs6000/crtrestvr.S	2017-01-05 02:42:41.988000000 +0000
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S gcc-6.3.0-ppc/libgcc/config/rs6000/crtsavevr.S
---- gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/config/rs6000/crtsavevr.S	2017-01-05 02:42:41.988000000 +0000
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.3.0/libgcc/crtstuff.c gcc-6.3.0-ppc/libgcc/crtstuff.c
---- gcc-6.3.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/crtstuff.c	2017-01-05 02:42:41.988000000 +0000
-@@ -47,6 +47,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
-+#define USED_FOR_TARGET
- 
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,

dkppc/patches/gdb-7.11.patch

@@ -1,18 +0,0 @@
-diff -NBaur gdb-7.10/gdb/Makefile.in gdb-7.10-ppc/gdb/Makefile.in
---- gdb-7.10/gdb/Makefile.in	2015-08-28 22:22:07.000000000 +0100
-+++ gdb-7.10-ppc/gdb/Makefile.in	2015-11-09 09:21:13.228003995 +0000
-@@ -2676,10 +2676,10 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+#@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+#@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+#@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+#@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)

dkppc/rules/base_rules

@@ -1,79 +0,0 @@
-#---------------------------------------------------------------------------------
-# change shell on Snow Leopard
-#---------------------------------------------------------------------------------
-UNAME_S	:=	$(shell uname -s)
-UNAME_R	:=	$(shell uname -r)
-
-ifneq (,$(findstring Darwin,$(UNAME_S)))
-	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
-		export SHELL=/bin/bash
-	endif
-endif
-
-#---------------------------------------------------------------------------------
-# path to tools 
-#---------------------------------------------------------------------------------
-export PORTLIBS	:=	$(DEVKITPRO)/portlibs/ppc
-export PATH	:=	$(DEVKITPPC)/bin:$(PORTLIBS)/bin:$(PATH)
-
-#---------------------------------------------------------------------------------
-# the prefix on the compiler executables
-#---------------------------------------------------------------------------------
-PREFIX	:=	powerpc-eabi-
-
-export AS	:=	$(PREFIX)as
-export CC	:=	$(PREFIX)gcc
-export CXX	:=	$(PREFIX)g++
-export AR	:=	$(PREFIX)ar
-export OBJCOPY	:=	$(PREFIX)objcopy
-
-
-ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
-
-ifneq (,$(ISVC))
-	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
-endif
-
-#---------------------------------------------------------------------------------
-%.a:
-#---------------------------------------------------------------------------------
-	@echo $(notdir $@)
-	@rm -f $@
-	@$(AR) -rc $@ $^
-
-#---------------------------------------------------------------------------------
-%.o: %.cpp
-	@echo $(notdir $<)
-	@$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
-	
-#---------------------------------------------------------------------------------
-%.o: %.c
-	@echo $(notdir $<)
-	@$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.m
-	@echo $(notdir $<)
-	@$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(OBJCFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.s
-	@echo $(notdir $<)
-	@$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-%.o: %.S
-	@echo $(notdir $<)
-	@$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
-
-#---------------------------------------------------------------------------------
-# canned command sequence for binary data
-#---------------------------------------------------------------------------------
-define bin2o
-	bin2s -a 32 $< | $(AS) -o $(@)
-	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo $(<F) | tr . _)`.h
-	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo $(<F) | tr . _)`.h
-	echo "extern const u32" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo $(<F) | tr . _)`.h
-endef
-
-

dkppc/rules/gamecube_rules

@@ -1,25 +0,0 @@
-ifeq ($(strip $(DEVKITPPC)),)
-$(error "Please set DEVKITPPC in your environment. export DEVKITPPC=<path to>devkitPro/devkitPPC)
-endif
-
-export	LIBOGC_INC	:=	$(DEVKITPRO)/libogc/include
-export	LIBOGC_LIB	:=	$(DEVKITPRO)/libogc/lib/cube
-
-include $(DEVKITPPC)/base_rules
-
-MACHDEP =  -DGEKKO -mogc -mcpu=750 -meabi -mhard-float
-
-#---------------------------------------------------------------------------------
-%.dol: %.elf
-	@echo output ... $(notdir $@)
-	@elf2dol $< $@
-
-#---------------------------------------------------------------------------------
-%.tpl : %.scf
-	@echo $(notdir $<)
-	@gxtexconv -s $< -d $(DEPSDIR)/$*.d -o $@
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking ... $(notdir $@)
-	@$(LD)  $^ $(LDFLAGS) $(LIBPATHS) $(LIBS) -o $@

dkppc/rules/wii_rules

@@ -1,25 +0,0 @@
-ifeq ($(strip $(DEVKITPPC)),)
-$(error "Please set DEVKITPPC in your environment. export DEVKITPPC=<path to>devkitPro/devkitPPC)
-endif
-
-export	LIBOGC_INC	:=	$(DEVKITPRO)/libogc/include
-export	LIBOGC_LIB	:=	$(DEVKITPRO)/libogc/lib/wii
-
-MACHDEP =  -DGEKKO -mrvl -mcpu=750 -meabi -mhard-float
-
-include $(DEVKITPPC)/base_rules
-
-#---------------------------------------------------------------------------------
-%.dol: %.elf
-	@echo output ... $(notdir $@)
-	@elf2dol $< $@
-
-#---------------------------------------------------------------------------------
-%.tpl : %.scf
-	@echo $(notdir $<)
-	@gxtexconv -s $< -d $(DEPSDIR)/$*.d -o $@
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking ... $(notdir $@)
-	@$(LD)  $^ $(LDFLAGS) $(LIBPATHS) $(LIBS) -o $@

dkppc/rules/wiiu_rules

@@ -1,12 +0,0 @@
-ifeq ($(strip $(DEVKITPPC)),)
-$(error "Please set DEVKITPPC in your environment. export DEVKITPPC=<path to>devkitPro/devkitPPC)
-endif
-
-MACHDEP = -DESPRESSO -mwup -mcpu=750 -meabi -mhard-float
-
-include $(DEVKITPPC)/base_rules
-
-#---------------------------------------------------------------------------------
-%.elf:
-	@echo linking ... $(notdir $@)
-	@$(LD)  $^ $(LDFLAGS) $(LIBPATHS) $(LIBS) -o $@

dkppc/scripts/build-crtls.sh

@@ -1,32 +1,16 @@
-#!/bin/bash
+#!/bin/sh
 
-export DEVKITPPC=$TOOLPATH/devkitPPC
+#---------------------------------------------------------------------------------
+# set env variables
+#---------------------------------------------------------------------------------
 export DEVKITPRO=$TOOLPATH
+export DEVKITPPC=$DEVKITPRO/devkitPPC
 
 #---------------------------------------------------------------------------------
-# Install and build the gamecube crt and libogc
+# Install the rules files
 #---------------------------------------------------------------------------------
+cd $BUILDDIR
 
-echo "installing linkscripts ..."
+tar -xvf $SRCDIR/devkitppc-rules-$DKPPC_RULES_VER.tar.gz
-cp $BUILDSCRIPTDIR/dkppc/crtls/*.ld $prefix/$target/lib/
+cd devkitppc-rules-$DKPPC_RULES_VER
-#---------------------------------------------------------------------------------
+make install
-# copy base rulesets
-#---------------------------------------------------------------------------------
-cp $BUILDSCRIPTDIR/dkppc/rules/* $prefix
-
-cd $BUILDDIR/libogc-$LIBOGC_VER
-
-if [ ! -f installed ]; then
-	echo "Building & installing libogc"
-	$MAKE install || { echo "libogc install failed"; exit 1; }
-	touch installed
-fi
-
-cd $BUILDDIR/libfat-$LIBFAT_VER
-
-if [ ! -f installed ]; then
-	echo "Building & installing libfat"
-	$MAKE ogc-install || { echo "libfat install failed"; exit 1; }
-	touch installed
-fi
-

dkppc/scripts/build-gcc.sh

@@ -12,7 +12,7 @@ cd $target/binutils
 
 if [ ! -f configured-binutils ]
 then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+	../../binutils-$BINUTILS_VER/configure \
 	--prefix=$prefix --target=$target --disable-nls --disable-shared --disable-debug \
 	--disable-werror \
 	--enable-poison-system-directories \
@@ -40,12 +40,15 @@ cd $BUILDDIR
 # build and install mn10200 binutils
 #---------------------------------------------------------------------------------
 
+# Use modern config.sub for aarch64 host
+cp binutils-$BINUTILS_VER/config.sub binutils-$MN_BINUTILS_VER/config.sub
+
 mkdir -p mn10200/binutils
 cd mn10200/binutils
 
 if [ ! -f configured-binutils ]
 then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$MN_BINUTILS_VER/configure \
+	../../binutils-$MN_BINUTILS_VER/configure \
 	--prefix=$prefix --target=mn10200 --disable-nls --disable-debug \
 	--disable-multilib \
 	--disable-werror $CROSS_PARAMS \
@@ -73,30 +76,36 @@ cd $BUILDDIR
 mkdir -p $target/gcc
 cd $target/gcc
 
+export gcc_cv_libc_provides_ssp=yes
+
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" \
-	CXXFLAGS="$cflags" \
-	LDFLAGS="$ldflags" \
 	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	LDFLAGS_FOR_TARGET="" \
 	../../gcc-$GCC_VER/configure \
-	--enable-languages=c,c++,objc \
+	--enable-languages=c,c++,objc,lto \
-	--enable-lto $plugin_ld \
+	--enable-lto \
 	--with-cpu=750 \
-	--disable-nls --disable-shared --enable-threads --disable-multilib \
+	--disable-nls --disable-shared --enable-threads=dkp --disable-multilib \
 	--disable-win32-registry \
 	--disable-libstdcxx-pch \
 	--disable-libstdcxx-verbose \
+	--enable-libstdcxx-time=yes \
+	--enable-libstdcxx-filesystem-ts \
+	--disable-tm-clone-registry \
+	--disable-__cxa_atexit \
+	--disable-libssp \
 	--enable-cxx-flags='-ffunction-sections -fdata-sections' \
 	--target=$target \
 	--with-newlib \
 	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
-	--prefix=$prefix\
+	--prefix=$prefix \
-	--with-system-zlib\
+	--with-bugurl="https://github.com/devkitpro/buildscripts/issues" --with-pkgversion="devkitPPC release 43" \
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 29-1" \
 	$CROSS_PARAMS \
+	$CROSS_GCC_PARAMS \
+	$EXTRA_GCC_PARAMS \
+        CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	|| { echo "Error configuring gcc stage 1"; exit 1; }
 	touch configured-gcc
 fi
@@ -123,14 +132,18 @@ cd $target/newlib
 unset CFLAGS
 unset LDFLAGS
 
+OLD_CC=$CC
+OLD_CXX=$CXX
+unset CC
+unset CXX
+
 if [ ! -f configured-newlib ]
 then
-	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections -DCUSTOM_MALLOC_LOCK" \
 	../../newlib-$NEWLIB_VER/configure \
 	--target=$target \
 	--prefix=$prefix \
 	--enable-newlib-mb \
-	--enable-newlib-hw-fp \
 	|| { echo "Error configuring newlib"; exit 1; }
 	touch configured-newlib
 fi
@@ -146,6 +159,9 @@ then
 	touch installed-newlib
 fi
 
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
 #---------------------------------------------------------------------------------
 # build and install the final compiler
 #---------------------------------------------------------------------------------
@@ -168,31 +184,11 @@ fi
 
 rm -fr $prefix/$target/sys-include
 
+#---------------------------------------------------------------------------------
+# Install and build the gamecube crt and libogc
+#---------------------------------------------------------------------------------
+
+echo "installing linkscripts ..."
+cp $BUILDSCRIPTDIR/dkppc/crtls/*.ld $prefix/$target/lib/
+
 cd $BUILDDIR
-
-#---------------------------------------------------------------------------------
-# build and install the debugger
-#---------------------------------------------------------------------------------
-mkdir -p $target/gdb
-cd $target/gdb
-
-if [ ! -f configured-gdb ]
-then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" ../../gdb-$GDB_VER/configure \
-	--disable-nls --prefix=$prefix --target=$target --disable-werror \
-	$CROSS_PARAMS || { echo "Error configuring gdb"; exit 1; }
-	touch configured-gdb
-fi
-
-if [ ! -f built-gdb ]
-then
-	$MAKE || { echo "Error building gdb"; exit 1; }
-	touch built-gdb
-fi
-
-if [ ! -f installed-gdb ]
-then
-	$MAKE install || { echo "Error installing gdb"; exit 1; }
-	touch installed-gdb
-fi
-

dkppc/scripts/build-tools.sh

@@ -1,20 +0,0 @@
-#!/bin/bash
-cd $BUILDDIR
-
-for archive in $hostarchives
-do
-	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
-	cd $BUILDDIR/$dir
-	if [ ! -f configured ]; then
-		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$prefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
-		touch configured
-	fi
-	if [ ! -f built ]; then
-		$MAKE || { echo "error building $archive"; exit 1; }
-		touch built
-	fi
-	if [ ! -f installed ]; then
-		$MAKE install || { echo "error installing $archive"; exit 1; }
-		touch installed
-	fi
-done

makedist.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 DATESTRING=$(date +%Y)$(date +%m)$(date +%d)
 cd .. && tar	--exclude=*CVS* --exclude=.svn --exclude=.git --exclude=*.log --exclude=*.bz2 \
-				--exclude=*.gz --exclude=config.sh --exclude=.devkitARM --exclude=.devkitPPC \
+				--exclude=*.gz --exclude=config.sh --exclude=.devkitARM* --exclude=.devkitPPC* \
-				--exclude=.devkitPSP --exclude=.gitignore \
+				--exclude=.devkitA64* --exclude=.gitignore \
 				-cvjf buildscripts-$DATESTRING.tar.bz2 buildscripts

select_toolchain.sh

@@ -17,8 +17,9 @@ do
   echo
   echo "Please select the toolchain you require"
   echo
-  echo "1: devkitARM (gba gp32 ds)"
+  echo "1: devkitARM (gba gp32 ds 3ds)"
-  echo "2: devkitPPC (gamecube wii)"
+  echo "2: devkitPPC (gamecube wii wii-u)"
+  echo "3: devkitA64 (switch)"
   read VERSION
 
   if [ "$VERSION" -ne 1 -a "$VERSION" -ne 2 -a "$VERSION" -ne 3 ]
@@ -29,24 +30,31 @@ done
 
 case "$VERSION" in
   "1" )
-    GCC_VER=7.1.0
+    GCC_VER=13.1.0
-    BINUTILS_VER=2.28
+    BINUTILS_VER=2.40
-    NEWLIB_VER=2.5.0
+    NEWLIB_VER=4.3.0.20230120
-    GDB_VER=8.0
     basedir='dkarm-eabi'
     package=devkitARM
     target=arm-none-eabi
     toolchain=DEVKITARM
   ;;
   "2" )
-    GCC_VER=6.3.0
+    GCC_VER=13.1.0
-    BINUTILS_VER=2.27
+    BINUTILS_VER=2.40
-    MN_BINUTILS_VER=2.17
+    MN_BINUTILS_VER=2.24
-    NEWLIB_VER=2.5.0
+    NEWLIB_VER=4.3.0.20230120
-    GDB_VER=7.11
     basedir='dkppc'
     package=devkitPPC
     target=powerpc-eabi
     toolchain=DEVKITPPC
   ;;
+  "3" )
+    GCC_VER=13.1.0
+    BINUTILS_VER=2.32
+    NEWLIB_VER=4.3.0.20230120
+    basedir='dka64'
+    package=devkitA64
+    target=aarch64-none-elf
+    toolchain=DEVKITA64
+  ;;
 esac

strip_toolchain.sh

@@ -27,5 +27,5 @@ fi
 #---------------------------------------------------------------------------------
 TOOLPATH=$(echo $INSTALLDIR | sed -e 's/^\([a-zA-Z]\):/\/\1/')
 export PATH=$PATH:$TOOLPATH/$package/bin
-
+export prefix=$INSTALLDIR/$CROSSBUILD/$package
 . ./strip_bins.sh