use latest libctru version

Properly default to UTF-8, expose (f)truncate, remove old malloc lock/unlock stubs

README.TXT

@@ -26,19 +26,26 @@ http://www.multiprecision.org/
 sudo apt-get install libgmp-dev libmpfr-dev libmpc-dev
 
 Some of the tools for devkitARM and devkitPPC also require FreeImage, zlib,
-and libusb. Again these are built as static libraries for ease of packaging
-but you can probably use the versions supplied by your distro.
+expat, and libusb. Again these are built as static libraries for ease of
+packaging but you can probably use the versions supplied by your distro.
 
 http://freeimage.sourceforge.net/
 http://www.zlib.net
 http://www.libusb.org
+http://expat.sourceforge.net/
+
+sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev libexpat1-dev
 
-sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev
 
 Building gxtexconv for cube/wii needs GL/gl.h which can be obtained with
 
 sudo apt-get install mesa-common-dev
 
+For building the OSX versions we install the Xcode commandline tools and build
+pkg-config from source as well as static versions of the libraries listed above.
+This helps keep the dependencies to a minimum so end users can use the tools
+with only Xcode command line tools to obtain make.
+
 To avoid having to manually answer prompts during the build the script will
 read variables from config.sh if it exists. Copy config.sh.sample to config.sh
 and set the variables as appropriate for your build.
@@ -85,16 +92,6 @@ to use the built in crt0 and linkscript use powerpc-eabi-gcc to link your projec
 using the command line switch -mgcn for a bare bones system, -mogc to use libogc and
 the multi-threaded microkernel for gamecube, -mrvl for wii, -mwup for wii u.
 
-Using devkitPSP
----------------
-
-All you need to do now to use devkitPSP is make sure that your freshly built tools
-are in your PATH, something like this;
-
-export PATH=$PATH:<path to devkitPSP>/bin
-
-(Obviously replace <path to devkitPSP> with the full path to the devkitPSP
-installation directory)
 
 Getting started
 ---------------

build-devkit.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 #---------------------------------------------------------------------------------
 #	devkitARM release 46
-#	devkitPPC release 29
+#	devkitPPC release 29-1
 #---------------------------------------------------------------------------------
 
 if [ 0 -eq 1 ] ; then
@@ -28,7 +28,7 @@ GENERAL_TOOLS_VER=1.0.0
 LIBGBA_VER=0.5.0
 GBATOOLS_VER=1.0.0
 
-LIBNDS_VER=1.6.0
+LIBNDS_VER=1.6.2
 DEFAULT_ARM7_VER=0.7.0
 DSWIFI_VER=0.4.0
 MAXMOD_VER=1.0.10
@@ -41,21 +41,24 @@ DLDITOOL_VER=1.24.0
 MMUTIL_VER=1.8.6
 
 DFU_UTIL_VER=0.9.1
-STLINK_VER=1.2.1
+STLINK_VER=1.2.2
 
 GAMECUBE_TOOLS_VER=1.0.1
 LIBOGC_VER=1.8.16
 WIILOAD_VER=0.5.1
 
-LIBCTRU_VER=1.2.0
+LIBCTRU_VER=1.2.1
 CITRO3D_VER=1.2.0
 TOOLS3DS_VER=1.1.4
 LINK3DS_VER=0.5.1
 PICASSO_VER=2.5.0
 
-GP32_TOOLS_VER=1.0.1
+GP32_TOOLS_VER=1.0.2
 LIBMIRKO_VER=0.9.7
 
+OSXMIN=${OSXMIN:-10.5}
+OSXSDKPATH=${OSXSDKPATH:-/Developer/SDKs/MacOSX10.5.sdk}
+
 #---------------------------------------------------------------------------------
 function extract_and_patch {
 #---------------------------------------------------------------------------------
@@ -165,8 +168,12 @@ PLATFORM=`uname -s`
 
 case $PLATFORM in
 	Darwin )
-		cflags="-mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk -I/usr/local/include"
-		ldflags="-mmacosx-version-min=10.5 -Wl,-syslibroot,/Developer/SDKs/MacOSX10.5.sdk -L/usr/local/lib"
+		cflags="-mmacosx-version-min=${OSXMIN} -isysroot ${OSXSDKPATH} -I/usr/local/include"
+		ldflags="-mmacosx-version-min=${OSXMIN} -Wl,-syslibroot,${OSXSDKPATH} -L/usr/local/lib"
+		TESTCC=`cc -v 2>&1 | grep clang`
+		if [ "x${TESTCC}x" != "xx" ]; then
+			cflags="$cflags -fbracket-depth=512"
+		fi
     ;;
 	MINGW32* )
 		cflags="-D__USE_MINGW_ACCESS"
@@ -180,7 +187,6 @@ BUILDDIR=$(pwd)/.$package
 if [ ! -z $CROSSBUILD ]; then
 	BUILDDIR=$BUILDDIR-$CROSSBUILD
 fi
-DEVKITPRO_URL="http://downloads.sourceforge.net/devkitpro"
 
 patchdir=$(pwd)/$basedir/patches
 scriptdir=$(pwd)/$basedir/scripts
@@ -222,7 +228,7 @@ for archive in $archives $targetarchives $hostarchives
 do
 	echo $archive
 	if [ ! -f $archive ]; then
-		$FETCH http://downloads.sf.net/devkitpro/$archive || { echo "Error: Failed to download $archive"; exit 1; }
+		$FETCH https://github.com/devkitPro/buildscripts/releases/download/sources/$archive || { echo "Error: Failed to download $archive"; exit 1; }
 	fi
 done
 

config.sh.sample

@@ -24,6 +24,12 @@ BUILD_DKPRO_PACKAGE=0
 #---------------------------------------------------------------------------------
 #BUILD_DKPRO_SRCDIR=/d/projects/archives
 
+#---------------------------------------------------------------------------------
+# MAKEFLAGS for building - use number of processors for jobs
+#---------------------------------------------------------------------------------
+#numcores=`getconf _NPROCESSORS_ONLN`
+#export MAKEFLAGS="$MAKEFLAGS -j${numcores}"
+
 #---------------------------------------------------------------------------------
 # Automated script execution
 #---------------------------------------------------------------------------------
@@ -31,3 +37,4 @@ BUILD_DKPRO_PACKAGE=0
 #  1: Use defaults, don't pause for answers
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_AUTOMATED=0
+

dkarm-eabi/crtls/dldi.ld

@@ -8,7 +8,7 @@ MEMORY {
 		the patcher / linker to find all shifted addresses within each section.
 		Changed sections are: glue_7, got
 	*/
-	ddmem	: ORIGIN = 0xBF800000, LENGTH = 32K		
+	ddmem	: ORIGIN = 0xBF800000, LENGTH = 16K		
 }
 
 

dkarm-eabi/scripts/build-gcc.sh

@@ -1,10 +1,6 @@
 #!/bin/sh
 #---------------------------------------------------------------------------------
 
-numcores=`getconf _NPROCESSORS_ONLN`
-
-numjobs=$(($numcores * 2 + 1))
-
 #---------------------------------------------------------------------------------
 # build and install binutils
 #---------------------------------------------------------------------------------
@@ -24,7 +20,7 @@ fi
 
 if [ ! -f built-binutils ]
 then
-  $MAKE -j$numjobs || { echo "Error building binutils"; exit 1; }
+  $MAKE || { echo "Error building binutils"; exit 1; }
   touch built-binutils
 fi
 
@@ -50,7 +46,7 @@ then
 	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	LDFLAGS_FOR_TARGET="" \
 	../../gcc-$GCC_VER/configure \
-		--enable-languages=c,c++,objc,obj-c++ \
+		--enable-languages=c,c++ \
 		--with-gnu-as --with-gnu-ld --with-gcc \
 		--with-march=armv4t\
 		--enable-cxx-flags='-ffunction-sections' \
@@ -74,7 +70,7 @@ fi
 
 if [ ! -f built-gcc ]
 then
-	$MAKE all-gcc -j$numjobs || { echo "Error building gcc stage1"; exit 1; }
+	$MAKE all-gcc || { echo "Error building gcc stage1"; exit 1; }
 	touch built-gcc
 fi
 
@@ -109,14 +105,14 @@ fi
 
 if [ ! -f built-newlib ]
 then
-	$MAKE -j$numjobs || { echo "Error building newlib"; exit 1; }
+	$MAKE || { echo "Error building newlib"; exit 1; }
 	touch built-newlib
 fi
 
 
 if [ ! -f installed-newlib ]
 then
-	$MAKE install || { echo "Error installing newlib"; exit 1; }
+	$MAKE install -j1 || { echo "Error installing newlib"; exit 1; }
 	touch installed-newlib
 fi
 
@@ -130,7 +126,7 @@ cd $target/gcc
 
 if [ ! -f built-stage2 ]
 then
-	$MAKE all -j$numjobs || { echo "Error building gcc stage2"; exit 1; }
+	$MAKE all || { echo "Error building gcc stage2"; exit 1; }
 	touch built-stage2
 fi
 
@@ -166,7 +162,7 @@ fi
 
 if [ ! -f built-gdb ]
 then
-	$MAKE -j$numjobs || { echo "Error building gdb"; exit 1; }
+	$MAKE || { echo "Error building gdb"; exit 1; }
 	touch built-gdb
 fi
 

dkppc/scripts/build-gcc.sh

@@ -75,7 +75,13 @@ cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" CXXFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" CXXFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
+	CFLAGS="$cflags" \
+	CXXFLAGS="$cflags" \
+	LDFLAGS="$ldflags" \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	LDFLAGS_FOR_TARGET="" \
+	../../gcc-$GCC_VER/configure \
 	--enable-languages=c,c++,objc \
 	--enable-lto $plugin_ld \
 	--with-cpu=750 \
@@ -89,7 +95,7 @@ then
 	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 	--prefix=$prefix\
 	--with-system-zlib\
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 29" \
+	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 29-1" \
 	$CROSS_PARAMS \
 	|| { echo "Error configuring gcc stage 1"; exit 1; }
 	touch configured-gcc
@@ -119,6 +125,7 @@ unset LDFLAGS
 
 if [ ! -f configured-newlib ]
 then
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	../../newlib-$NEWLIB_VER/configure \
 	--target=$target \
 	--prefix=$prefix \
@@ -135,7 +142,7 @@ then
 fi
 if [ ! -f installed-newlib ]
 then
-	$MAKE install || { echo "Error installing newlib"; exit 1; }
+	$MAKE install -j1 || { echo "Error installing newlib"; exit 1; }
 	touch installed-newlib
 fi