enable scripts for release tarball

Add support for changing start address in 3dsx linker script

README.TXT

@@ -23,6 +23,8 @@ http://gmplib.org/
 http://www.mpfr.org/
 http://www.multiprecision.org/
 
+sudo apt-get install libgmp-dev libmpfr-dev libmpc-dev
+
 Some of the tools for devkitARM and devkitPPC also require FreeImage, zlib,
 and libusb. Again these are built as static libraries for ease of packaging
 but you can probably use the versions supplied by your distro.
@@ -31,7 +33,10 @@ http://freeimage.sourceforge.net/
 http://www.zlib.net
 http://www.libusb.org
 
+sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev
+
 Building gxtexconv for cube/wii needs GL/gl.h which can be obtained with
+
 sudo apt-get install mesa-common-dev
 
 To avoid having to manually answer prompts during the build the script will
@@ -78,7 +83,7 @@ Using devkitPPC
 
 to use the built in crt0 and linkscript use powerpc-eabi-gcc to link your project,
 using the command line switch -mgcn for a bare bones system, -mogc to use libogc and
-the multi-threaded microkernel for gamecube, -mrvl for wii.
+the multi-threaded microkernel for gamecube, -mrvl for wii, -mwup for wii u.
 
 Using devkitPSP
 ---------------

build-devkit.sh

@@ -1,8 +1,7 @@
 #!/bin/bash
 #---------------------------------------------------------------------------------
-# Build scripts for
 #	devkitARM release 45
-#	devkitPPC release 27
+#	devkitPPC release 28
 #	devkitPSP release 17
 #---------------------------------------------------------------------------------
 
@@ -24,7 +23,7 @@ echo "Patches and improvements are of course welcome, please send these to the p
 echo "https://sourceforge.net/tracker/?group_id=114505&atid=668553"
 echo
 
-LIBOGC_VER=1.8.12
+LIBOGC_VER=1.8.15
 LIBGBA_VER=20150106
 LIBNDS_VER=1.5.12
 LIBCTRU_VER=0.6.0
@@ -42,7 +41,7 @@ GRIT_VER=0.8.13
 NDSTOOL_VER=1.50.3
 GENERAL_TOOLS_VER=1.0.0
 DLDITOOL_VER=1.24.0
-GAMECUBE_TOOLS_VER=1.0.0
+GAMECUBE_TOOLS_VER=1.0.1
 WIILOAD_VER=0.5.1
 MMUTIL_VER=1.8.6
 DFU_UTIL_VER=0.8.1
@@ -56,17 +55,7 @@ function extract_and_patch {
 #---------------------------------------------------------------------------------
 	if [ ! -f extracted-$1 ]; then
 		echo "extracting $1"
-		if [ $3 == "bz2" ]; then
-			extractflags="-xjf"
-			archivetype=".tar.bz2"
-		elif [ $3 == "gz" ]; then
-			extractflags="-xzf"
-			archivetype=".tar.gz"
-		else
-			echo "invalid archive type"
-			exit 1
-		fi
-		tar $extractflags "$SRCDIR/$1-$2$archivetype" || { echo "Error extracting "$1; exit 1; }
+		tar -xf "$SRCDIR/$1-$2.tar.$3" || { echo "Error extracting "$1; exit 1; }
 		touch extracted-$1
 	fi
 	if [[ ! -f patched-$1 && -f $patchdir/$1-$2.patch ]]; then
@@ -170,10 +159,8 @@ PLATFORM=`uname -s`
 
 case $PLATFORM in
 	Darwin )
-		cflags="-mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc"
-		ldflags="-mmacosx-version-min=10.4 -arch i386 -arch ppc -Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk"
-		export CC=gcc-4.0
-		export CXX=g++-4.0
+                cflags="-mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk -I/usr/local/include"
+                ldflags="-mmacosx-version-min=10.5 -Wl,-syslibroot,/Developer/SDKs/MacOSX10.5.sdk -L/usr/local/lib"
     ;;
 	MINGW32* )
 		cflags="-D__USE_MINGW_ACCESS"

dkarm-eabi/crtls/3dsx.ld

@@ -13,8 +13,8 @@ SECTIONS
 {
 	/* =========== CODE section =========== */
 
-	. = 0x100000;
-	__start__ = . ;
+	PROVIDE(__start__ = 0x100000);
+	. = __start__;
 
 	.text ALIGN(0x1000) :
 	{

dkppc/crtls/wup.ld

@@ -0,0 +1,257 @@
+/*
+ * Linkscript for Wii U
+ */
+
+OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc");
+OUTPUT_ARCH(powerpc:common);
+EXTERN(_start);
+ENTRY(_start);
+
+PHDRS
+{
+  stub PT_LOAD FLAGS(5);
+  text PT_LOAD FLAGS(5);
+  data PT_LOAD FLAGS(6);
+  bss1 PT_LOAD;
+  bss2 PT_LOAD;
+}
+
+SECTIONS
+{
+	/* default base address */
+	/* use -Wl,--section-start,.init=0xADDRESS to change */
+	. = 0x00802000;
+
+	/* Program */
+	.init          :
+	{
+		KEEP (*crt0.o(*.init))
+		KEEP (*(.init))
+	} :text = 0
+	.plt      : { *(.plt)	}
+	.interp			: { *(.interp) 	}
+	.hash			: { *(.hash) }
+	.dynsym			: { *(.dynsym) }
+	.dynstr			: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+	.rel.init		: { *(.rel.init) }
+	.rela.init		: { *(.rela.init) }
+	.rel.text		: { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+	.rela.text		: { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+	.rel.fini		: { *(.rel.fini) }
+	.rela.fini		: { *(.rela.fini) }
+	.rel.rodata		: { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+	.rela.rodata	: { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+	.rel.data		: { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+	.rela.data		: { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+	.rel.tdata		: { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+	.rela.tdata		: { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+	.rel.tbss		: { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+	.rela.tbss		: { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+	.rel.ctors		: { *(.rel.ctors) }
+	.rela.ctors		: { *(.rela.ctors) }
+	.rel.dtors		: { *(.rel.dtors) }
+	.rela.dtors		: { *(.rela.dtors) }
+	.rel.got		: { *(.rel.got)	}
+	.rela.got		: { *(.rela.got) }
+	.rela.got1		: { *(.rela.got1) }
+	.rela.got2		: { *(.rela.got2) }
+	.rel.sdata		: { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
+	.rela.sdata		: { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
+	.rel.sbss		: { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
+	.rela.sbss		: { *(.rela.sbss .rela.sbss.* .rel.gnu.linkonce.sb.*) }
+	.rel.sdata2		: { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
+	.rela.sdata2	: { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
+	.rel.sbss2		: { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
+	.rela.sbss2		: { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
+	.rel.bss		: { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+	.rela.bss		: { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+	.rel.plt		: { *(.rel.plt) }
+	.rela.plt		: { *(.rela.plt) }
+
+	.text      :
+	{
+		*(.text)
+		*(.text.*)
+		/* .gnu.warning sections are handled specially by elf32.em.  */
+		*(.gnu.warning)
+		*(.gnu.linkonce.t.*)
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	} = 0
+
+	.fini      :
+	{
+		KEEP (*(.fini))
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	} = 0
+	
+	PROVIDE (__etext = .);
+	PROVIDE (_etext = .);
+	PROVIDE (etext = .);
+
+	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
+	.rodata1   : { *(.rodata1) }
+	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
+	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  /* Ensure the __preinit_array_start label is properly aligned.  We
+     could instead move the label definition inside the section, but
+     the linker would then create the section even if it turns out to
+     be empty, which isn't pretty.  */
+	. = ALIGN(32 / 8);
+	PROVIDE (__preinit_array_start = .);
+	.preinit_array     : { *(.preinit_array) }
+	PROVIDE (__preinit_array_end = .);
+	PROVIDE (__init_array_start = .);
+	.init_array     : { *(.init_array) }
+	PROVIDE (__init_array_end = .);
+	PROVIDE (__fini_array_start = .);
+	.fini_array     : { *(.fini_array) }
+	PROVIDE (__fini_array_end = .);
+	.data    :
+	{
+		*(.data)
+		*(.data.*)
+		*(.gnu.linkonce.d.*)
+		SORT(CONSTRUCTORS)
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	}
+
+	.data1   : { *(.data1) }
+	.tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+	.tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+	.eh_frame : { KEEP (*(.eh_frame)) }
+	.gcc_except_table : { *(.gcc_except_table) }
+	.fixup          : { *(.fixup) }
+	.got1           : { *(.got1) }
+	.got2           : { *(.got2) }
+	.dynamic       : { *(.dynamic) }
+
+	.ctors   :
+	{
+	/*	gcc uses crtbegin.o to find the start of
+		the constructors, so we make sure it is
+		first.  Because this is a wildcard, it
+		doesn't matter if the user does not
+		actually link against crtbegin.o; the
+		linker won't look for a file to match a
+		wildcard.  The wildcard also means that it
+		doesn't matter which directory crtbegin.o
+		is in.  */
+
+		KEEP (*crtbegin.o(.ctors))
+
+    /*	We don't want to include the .ctor section from
+		from the crtend.o file until after the sorted ctors.
+		The .ctor section from the crtend file contains the
+		end of ctors marker and it must be last */
+
+		KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
+		KEEP (*(SORT(.ctors.*)))
+		KEEP (*(.ctors))
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	}
+
+	.dtors         :
+	{
+		KEEP (*crtbegin.o(.dtors))
+		KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
+		KEEP (*(SORT(.dtors.*)))
+		KEEP (*(.dtors))
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	}
+
+	.jcr            : { KEEP (*(.jcr)) }
+	.got		  : { *(.got.plt) *(.got) }
+
+
+	/*	We want the small data sections together, so single-instruction offsets
+		can access them all, and initialized data all before uninitialized, so
+		we can shorten the on-disk segment size.  */
+
+	.sdata     :
+	{
+		*(.sdata)
+		*(.sdata.*)
+		*(.gnu.linkonce.s.*)
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	}
+
+	_edata = .;
+	PROVIDE (edata = .);
+	
+	.sbss      :
+	{
+		__sbss_start = .;
+		PROVIDE (__sbss_start = .);
+		PROVIDE (___sbss_start = .);
+		*(.dynsbss)
+		*(.sbss)
+		*(.sbss.*)
+		*(.gnu.linkonce.sb.*)
+		*(.scommon)
+		PROVIDE (__sbss_end = .);
+		PROVIDE (___sbss_end = .);
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+		__sbss_end = .;
+	} :bss1
+
+	.bss       :
+	{
+		__bss_start = .;
+		PROVIDE (__bss_start = .);
+		*(.dynbss)
+		*(.bss)
+		*(.bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+	/*	Align here to ensure that the .bss section occupies space up to
+		_end.  Align after .bss to ensure correct alignment even if the
+		.bss section disappears because there are no input sections.  */
+
+		. = ALIGN(32);
+
+		PROVIDE (__bss_end = .);
+		__bss_end = .;
+	} :bss2
+
+	_end = .;
+	PROVIDE(end = .);
+	/* Stabs debugging sections.  */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	/*	DWARF debug sections.
+		Symbols in the DWARF debugging sections are relative to the beginning
+		of the section so we begin them at 0.  */
+	/* DWARF 1 */
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+	/* GNU DWARF 1 extensions */
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+	/* DWARF 1.1 and DWARF 2 */
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	/* DWARF 2 */
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+	/* SGI/MIPS DWARF 2 extensions */
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames  0 : { *(.debug_varnames) }
+	/* These must appear regardless of  .  */
+}

dkppc/patches/binutils-2.24.patch

@@ -1,12 +0,0 @@
-diff -Nbaur binutils-2.24/opcodes/ppc-opc.c binutils-2.24-ppc/opcodes/ppc-opc.c
---- binutils-2.24/opcodes/ppc-opc.c	2013-11-04 15:33:40.000000000 +0000
-+++ binutils-2.24-ppc/opcodes/ppc-opc.c	2014-04-01 14:22:06.000000000 +0100
-@@ -2735,7 +2735,7 @@
- #define MFDEC1	PPC_OPCODE_POWER
- #define MFDEC2	PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE | PPC_OPCODE_TITAN
- #define BOOKE	PPC_OPCODE_BOOKE
--#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS | PPC_OPCODE_VLE
-+#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS | PPC_OPCODE_VLE
- #define PPCE300 PPC_OPCODE_E300
- #define PPCSPE	PPC_OPCODE_SPE | PPC_OPCODE_VLE
- #define PPCISEL PPC_OPCODE_ISEL | PPC_OPCODE_VLE

dkppc/patches/binutils-2.27.patch

@@ -0,0 +1,12 @@
+diff -Nbaur binutils-2.27/opcodes/ppc-opc.c binutils-2.27-ppc/opcodes/ppc-opc.c
+--- binutils-2.27/opcodes/ppc-opc.c	2016-08-03 08:36:54.000000000 +0100
++++ binutils-2.27-ppc/opcodes/ppc-opc.c	2016-11-08 21:37:45.360000000 +0000
+@@ -3037,7 +3037,7 @@
+ #define MFDEC1	PPC_OPCODE_POWER
+ #define MFDEC2	PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE | PPC_OPCODE_TITAN
+ #define BOOKE	PPC_OPCODE_BOOKE
+-#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS
++#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS
+ #define PPCE300 PPC_OPCODE_E300
+ #define PPCSPE	PPC_OPCODE_SPE
+ #define PPCISEL PPC_OPCODE_ISEL

dkppc/patches/gcc-6.2.0.patch

@@ -1,7 +1,7 @@
-diff -Nbaur gcc-4.8.2/gcc/config/rs6000/rs6000.h gcc-4.8.2-ppc/gcc/config/rs6000/rs6000.h
---- gcc-4.8.2/gcc/config/rs6000/rs6000.h	2013-06-19 02:18:38.000000000 +0100
-+++ gcc-4.8.2-ppc/gcc/config/rs6000/rs6000.h	2014-04-01 14:13:11.000000000 +0100
-@@ -195,6 +195,7 @@
+diff -NBaur gcc-6.1.0/gcc/config/rs6000/rs6000.h gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h
+--- gcc-6.1.0/gcc/config/rs6000/rs6000.h	2016-01-20 20:30:24.000000000 +0000
++++ gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h	2016-05-20 12:10:24.645019640 +0100
+@@ -205,6 +205,7 @@
    { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
    SUBTARGET_EXTRA_SPECS
  
@@ -9,42 +9,44 @@ diff -Nbaur gcc-4.8.2/gcc/config/rs6000/rs6000.h gcc-4.8.2-ppc/gcc/config/rs6000
  /* -mcpu=native handling only makes sense with compiler running on
     an PowerPC chip.  If changing this condition, also change
     the condition in driver-rs6000.c.  */
-@@ -209,6 +210,8 @@
+@@ -219,6 +220,8 @@
  #else
  #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
  #endif
-+#endif 
++#endif
 +#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
  
  #ifndef CC1_CPU_SPEC
  #ifdef HAVE_LOCAL_CPU_DETECT
-diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.h gcc-4.8.2-ppc/gcc/config/rs6000/sysv4.h
---- gcc-4.8.2/gcc/config/rs6000/sysv4.h	2013-06-19 02:18:38.000000000 +0100
-+++ gcc-4.8.2-ppc/gcc/config/rs6000/sysv4.h	2014-04-01 14:13:11.000000000 +0100
-@@ -570,7 +570,11 @@
+diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.h gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h
+--- gcc-6.1.0/gcc/config/rs6000/sysv4.h	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h	2016-05-20 12:12:27.073019640 +0100
+@@ -559,7 +559,12 @@
  
  /* Default starting address if specified.  */
  #define LINK_START_SPEC "\
 -%{mads         : %(link_start_ads)         ; \
-+%{mgcn|mogc         : %(link_start_ogc)         ; \
++%{mgcn|mogc    : %(link_start_ogc)         ; \
 +  mvgc         : %(link_start_vgc)         ; \
-+  mgcbios         : %(link_start_gcb)         ; \
++  mgcbios      : %(link_start_gcb)         ; \
 +  mrvl         : %(link_start_rvl)         ; \
++  mwup         : %(link_start_wup)         ; \
 +  mads         : %(link_start_ads)         ; \
    myellowknife : %(link_start_yellowknife) ; \
    mmvme        : %(link_start_mvme)        ; \
    msim         : %(link_start_sim)         ; \
-@@ -604,7 +608,8 @@
+@@ -590,7 +594,9 @@
  
  /* Any specific OS flags.  */
  #define LINK_OS_SPEC "\
 -%{mads         : %(link_os_ads)         ; \
 +%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
++  mwup         : %(link_os_wup)         ; \
 +  mads         : %(link_os_ads)         ; \
    myellowknife : %(link_os_yellowknife) ; \
    mmvme        : %(link_os_mvme)        ; \
    msim         : %(link_os_sim)         ; \
-@@ -622,7 +627,10 @@
+@@ -608,7 +613,11 @@
  /* Override rs6000.h definition.  */
  #undef	CPP_SPEC
  #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
@@ -52,11 +54,12 @@ diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.h gcc-4.8.2-ppc/gcc/config/rs6000/
 +%{mgcn         : %(cpp_os_gcn)         ; \
 +  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
 +  mrvl         : %(cpp_os_rvl)         ; \
++  mwup         : %(cpp_os_wup)         ; \
 +  mads         : %(cpp_os_ads)         ; \
    myellowknife : %(cpp_os_yellowknife) ; \
    mmvme        : %(cpp_os_mvme)        ; \
    msim         : %(cpp_os_sim)         ; \
-@@ -636,7 +644,10 @@
+@@ -622,7 +630,11 @@
  
  #undef	STARTFILE_SPEC
  #define	STARTFILE_SPEC "\
@@ -64,11 +67,12 @@ diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.h gcc-4.8.2-ppc/gcc/config/rs6000/
 +%{mgcn         : %(startfile_gcn)         ; \
 +  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
 +  mrvl         : %(startfile_ogc)         ; \
++  mwup         : %(startfile_wup)         ; \
 +  mads         : %(startfile_ads)         ; \
    myellowknife : %(startfile_yellowknife) ; \
    mmvme        : %(startfile_mvme)        ; \
    msim         : %(startfile_sim)         ; \
-@@ -646,11 +657,12 @@
+@@ -632,11 +643,13 @@
    mcall-openbsd: %(startfile_openbsd)     ; \
                 : %(startfile_default)     }"
  
@@ -79,11 +83,12 @@ diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.h gcc-4.8.2-ppc/gcc/config/rs6000/
  #define	LIB_SPEC "\
 -%{mads         : %(lib_ads)         ; \
 +%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
++  mwup         : %(lib_wup)         ; \
 +  mads         : %(lib_ads)         ; \
    myellowknife : %(lib_yellowknife) ; \
    mmvme        : %(lib_mvme)        ; \
    msim         : %(lib_sim)         ; \
-@@ -660,11 +672,12 @@
+@@ -646,11 +658,13 @@
    mcall-openbsd: %(lib_openbsd)     ; \
                 : %(lib_default)     }"
  
@@ -94,98 +99,111 @@ diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.h gcc-4.8.2-ppc/gcc/config/rs6000/
  #define	ENDFILE_SPEC "\
 -%{mads         : %(endfile_ads)         ; \
 +%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
++  mwup         : %(endfile_wup)         ; \
 +  mads         : %(endfile_ads)         ; \
    myellowknife : %(endfile_yellowknife) ; \
    mmvme        : %(endfile_mvme)        ; \
    msim         : %(endfile_sim)         ; \
-@@ -680,16 +693,27 @@
+@@ -666,16 +679,33 @@
  
  /* Motorola ADS support.  */
  #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
 +#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
++#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
  
  #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
 +#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
++#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
  
  #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
 +#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
  
  #define LINK_START_ADS_SPEC "-T ads.ld%s"
 +#define LINK_START_OGC_SPEC "-T ogc.ld%s"
 +#define LINK_START_RVL_SPEC "-T rvl.ld%s"
++#define LINK_START_WUP_SPEC "-T wup.ld%s"
 +#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
 +#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
  
  #define LINK_OS_ADS_SPEC ""
 +#define LINK_OS_OGC_SPEC "--gc-sections"
++#define LINK_OS_WUP_SPEC "--gc-sections"
  
  #define CPP_OS_ADS_SPEC ""
 +#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
 +#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
 +#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
++#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
  
  /* Motorola Yellowknife support.  */
  #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -859,6 +883,7 @@
+@@ -855,6 +879,8 @@
  #undef	SUBTARGET_EXTRA_SPECS
  #define	SUBTARGET_EXTRA_SPECS						\
    { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
 +  { "lib_ogc",			LIB_OGC_SPEC },				\
++  { "lib_wup",			LIB_WUP_SPEC },	                        \
    { "lib_ads",			LIB_ADS_SPEC },				\
    { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
    { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -868,6 +893,7 @@
+@@ -864,6 +889,8 @@
    { "lib_netbsd",		LIB_NETBSD_SPEC },			\
    { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
    { "lib_default",		LIB_DEFAULT_SPEC },			\
 +  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
++  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
    { "startfile_ads",		STARTFILE_ADS_SPEC },			\
    { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
    { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -877,6 +903,7 @@
+@@ -873,6 +899,8 @@
    { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
    { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
    { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
 +  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
++  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
    { "endfile_ads",		ENDFILE_ADS_SPEC },			\
    { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
    { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -889,7 +916,11 @@
+@@ -884,7 +911,12 @@
+   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
    { "link_shlib",		LINK_SHLIB_SPEC },			\
-   { "link_target",		LINK_TARGET_SPEC },			\
    { "link_start",		LINK_START_SPEC },			\
 +  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
 +  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
 +  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
++  { "link_start_wup",		LINK_START_WUP_SPEC },			\
    { "link_start_ads",		LINK_START_ADS_SPEC },			\
 +  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
    { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
    { "link_start_mvme",		LINK_START_MVME_SPEC },			\
    { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -899,6 +930,7 @@
+@@ -894,6 +925,8 @@
    { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
    { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
    { "link_os",			LINK_OS_SPEC },				\
 +  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
++  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
    { "link_os_ads",		LINK_OS_ADS_SPEC },			\
    { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
    { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -912,6 +944,9 @@
-   { "cc1_endian_little",	CC1_ENDIAN_LITTLE_SPEC },		\
-   { "cc1_endian_default",	CC1_ENDIAN_DEFAULT_SPEC },		\
+@@ -905,6 +937,10 @@
+   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
    { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
+   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
 +  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
 +  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
 +  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
++  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
    { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
    { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
    { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.opt gcc-4.8.2-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-4.8.2/gcc/config/rs6000/sysv4.opt	2013-01-10 20:38:27.000000000 +0000
-+++ gcc-4.8.2-ppc/gcc/config/rs6000/sysv4.opt	2014-04-01 14:13:11.000000000 +0100
-@@ -120,6 +120,26 @@
+diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.opt gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt
+--- gcc-6.1.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt	2016-05-20 12:10:24.649019640 +0100
+@@ -120,6 +120,30 @@
  Target RejectNegative
- Link with libads.a, libc.a and crt0.o
+ Link with libads.a, libc.a and crt0.o.
  
 +mgcn
 +Target RejectNegative
@@ -206,14 +224,18 @@ diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.opt gcc-4.8.2-ppc/gcc/config/rs600
 +mrvl
 +Target RejectNegative
 +Link with libsysbase.a and libc.a, use rvl linker script 
++
++mwup
++Target RejectNegative
++Link with libsysbase.a and libc.a, use wup linker script 
 +
  myellowknife
  Target RejectNegative
- Link with libyk.a, libc.a and crt0.o
-diff -Nbaur gcc-4.8.2/gcc/config.gcc gcc-4.8.2-ppc/gcc/config.gcc
---- gcc-4.8.2/gcc/config.gcc	2013-10-03 01:47:24.000000000 +0100
-+++ gcc-4.8.2-ppc/gcc/config.gcc	2014-04-01 14:13:11.000000000 +0100
-@@ -2057,7 +2057,7 @@
+ Link with libyk.a, libc.a and crt0.o.
+diff -NBaur gcc-6.1.0/gcc/config.gcc gcc-6.1.0-ppc/gcc/config.gcc
+--- gcc-6.1.0/gcc/config.gcc	2016-04-11 11:14:59.000000000 +0100
++++ gcc-6.1.0-ppc/gcc/config.gcc	2016-05-20 12:10:24.661019640 +0100
+@@ -2381,7 +2381,7 @@
  	use_gcc_stdint=wrap
  	;;
  powerpc-*-eabi*)
@@ -222,10 +244,24 @@ diff -Nbaur gcc-4.8.2/gcc/config.gcc gcc-4.8.2-ppc/gcc/config.gcc
  	extra_options="${extra_options} rs6000/sysv4.opt"
  	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
  	use_gcc_stdint=wrap
-diff -Nbaur gcc-4.8.2/libcpp/Makefile.in gcc-4.8.2-ppc/libcpp/Makefile.in
---- gcc-4.8.2/libcpp/Makefile.in	2013-10-16 08:27:58.000000000 +0100
-+++ gcc-4.8.2-ppc/libcpp/Makefile.in	2014-04-01 14:13:11.000000000 +0100
-@@ -207,8 +207,7 @@
+diff -NBaur gcc-6.1.0/gcc/Makefile.in gcc-6.1.0-ppc/gcc/Makefile.in
+--- gcc-6.1.0/gcc/Makefile.in	2016-04-15 12:49:39.000000000 +0100
++++ gcc-6.1.0-ppc/gcc/Makefile.in	2016-05-20 12:10:24.641019640 +0100
+@@ -1073,8 +1073,8 @@
+ # things like the go/%.o rule work properly; but we use $(*F) for the
+ # file part, as we just want the file part of the stem, not the entire
+ # file name.
+-COMPILE = $(COMPILE.base) -MT $@ -MMD -MP -MF $(@D)/$(DEPDIR)/$(*F).TPo
+-POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(*F).TPo $(@D)/$(DEPDIR)/$(*F).Po
++COMPILE = $(COMPILE.base)
++POSTCOMPILE =
+ else
+ COMPILE = source='$<' object='$@' libtool=no \
+     DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
+diff -NBaur gcc-6.1.0/libcpp/Makefile.in gcc-6.1.0-ppc/libcpp/Makefile.in
+--- gcc-6.1.0/libcpp/Makefile.in	2016-04-27 09:22:11.000000000 +0100
++++ gcc-6.1.0-ppc/libcpp/Makefile.in	2016-05-20 12:10:24.661019640 +0100
+@@ -208,8 +208,7 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
  # not atomically write the dependency output file.
@@ -235,9 +271,9 @@ diff -Nbaur gcc-4.8.2/libcpp/Makefile.in gcc-4.8.2-ppc/libcpp/Makefile.in
  else
  COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
  	  $(depcomp) $(COMPILE.base)
-diff -Nbaur gcc-4.8.2/libgcc/config/rs6000/crtrestvr.S gcc-4.8.2-ppc/libgcc/config/rs6000/crtrestvr.S
---- gcc-4.8.2/libgcc/config/rs6000/crtrestvr.S	2013-02-04 19:06:20.000000000 +0000
-+++ gcc-4.8.2-ppc/libgcc/config/rs6000/crtrestvr.S	2014-04-01 14:13:11.000000000 +0100
+diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S
+--- gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S	2016-05-20 12:10:24.665019640 +0100
 @@ -24,7 +24,7 @@
  
  /* On PowerPC64 Linux, these functions are provided by the linker.  */
@@ -252,31 +288,43 @@ diff -Nbaur gcc-4.8.2/libgcc/config/rs6000/crtrestvr.S gcc-4.8.2-ppc/libgcc/conf
  
  #endif
 +#endif
-diff -Nbaur gcc-4.8.2/libgcc/config/rs6000/crtsavevr.S gcc-4.8.2-ppc/libgcc/config/rs6000/crtsavevr.S
---- gcc-4.8.2/libgcc/config/rs6000/crtsavevr.S	2013-02-04 19:06:20.000000000 +0000
-+++ gcc-4.8.2-ppc/libgcc/config/rs6000/crtsavevr.S	2014-04-01 14:13:11.000000000 +0100
-@@ -24,6 +24,7 @@
+diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S
+--- gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S	2016-05-20 12:10:24.665019640 +0100
+@@ -24,7 +24,7 @@
  
  /* On PowerPC64 Linux, these functions are provided by the linker.  */
  #ifndef __powerpc64__
+-
 +#if 0
- 
  #undef __ALTIVEC__
  #define __ALTIVEC__ 1
-@@ -85,3 +86,4 @@
+ 	#include "ppc-asm.h"
+@@ -85,3 +85,4 @@
  CFI_ENDPROC
  
  #endif
 +#endif
-diff -Nbaur gcc-4.8.2/libgcc/crtstuff.c gcc-4.8.2-ppc/libgcc/crtstuff.c
---- gcc-4.8.2/libgcc/crtstuff.c	2013-02-04 19:06:20.000000000 +0000
-+++ gcc-4.8.2-ppc/libgcc/crtstuff.c	2014-04-01 14:13:11.000000000 +0100
-@@ -47,7 +47,7 @@
+diff -NBaur gcc-6.1.0/libgcc/crtstuff.c gcc-6.1.0-ppc/libgcc/crtstuff.c
+--- gcc-6.1.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/libgcc/crtstuff.c	2016-05-20 12:10:24.669019640 +0100
+@@ -47,6 +47,7 @@
  
  /* Target machine header files require this define. */
  #define IN_LIBGCC2
--
 +#define USED_FOR_TARGET
+ 
  /* FIXME: Including auto-host is incorrect, but until we have
     identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
+diff -NBaur gcc-6.1.0/libstdc++-v3/include/std/type_traits gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits
+--- gcc-6.1.0/libstdc++-v3/include/std/type_traits	2016-01-12 21:19:58.000000000 +0000
++++ gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits	2016-05-20 12:10:24.669019640 +0100
+@@ -38,7 +38,7 @@
+ #include <bits/c++config.h>
+ 
+ #ifdef _GLIBCXX_USE_C99_STDINT_TR1
+-# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__)
++# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__) && 0
+ namespace std
+ {
+   typedef __UINT_LEAST16_TYPE__ uint_least16_t;

dkppc/patches/gdb-7.11.patch

@@ -1,7 +1,7 @@
-diff -Nbaur gdb-7.7/gdb/Makefile.in gdb-7.7-ppc/gdb/Makefile.in
---- gdb-7.7/gdb/Makefile.in	2014-02-06 02:21:29.000000000 +0000
-+++ gdb-7.7-ppc/gdb/Makefile.in	2014-04-01 14:01:24.000000000 +0100
-@@ -2307,10 +2307,10 @@
+diff -NBaur gdb-7.10/gdb/Makefile.in gdb-7.10-ppc/gdb/Makefile.in
+--- gdb-7.10/gdb/Makefile.in	2015-08-28 22:22:07.000000000 +0100
++++ gdb-7.10-ppc/gdb/Makefile.in	2015-11-09 09:21:13.228003995 +0000
+@@ -2676,10 +2676,10 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
  # not atomically write the dependency output file.
@@ -16,15 +16,3 @@ diff -Nbaur gdb-7.7/gdb/Makefile.in gdb-7.7-ppc/gdb/Makefile.in
  @GMAKE_TRUE@else
  @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
  @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.7/sim/ppc/Makefile.in gdb-7.7-ppc/sim/ppc/Makefile.in
---- gdb-7.7/sim/ppc/Makefile.in	2013-12-08 04:55:48.000000000 +0000
-+++ gdb-7.7-ppc/sim/ppc/Makefile.in	2014-04-01 14:01:24.000000000 +0100
-@@ -552,7 +552,7 @@
- PACKAGE_OBJ = @sim_pk_obj@
- 
- 
--psim: $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(LIBS) $(LIBINTL_DEP)
-+psim: $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(LIBINTL_DEP)
- 	$(CC) $(CFLAGS) $(SIM_CFLAGS) $(LDFLAGS) -o psim$(EXEEXT) main.o $(TARGETLIB) $(BFD_LIB) $(LIBINTL) $(LIBIBERTY_LIB) $(LIBS)
- 
- run: psim

dkppc/patches/newlib-2.0.0.patch

@@ -6630,29 +6630,6 @@ diff -Nbaur newlib-2.0.0/newlib/libc/include/pthread.h newlib-2.0.0-ppc/newlib/l
 -
 -#endif
 -/* end of include file */
-diff -Nbaur newlib-2.0.0/newlib/libc/include/stdint.h newlib-2.0.0-ppc/newlib/libc/include/stdint.h
---- newlib-2.0.0/newlib/libc/include/stdint.h	2012-10-16 19:45:23.000000000 +0100
-+++ newlib-2.0.0-ppc/newlib/libc/include/stdint.h	2013-09-06 22:13:38.000000000 +0100
-@@ -75,14 +75,14 @@
- #endif
- #endif
- 
--#if __have_long32
--typedef signed long int32_t;
--typedef unsigned long uint32_t;
--#define __int32_t_defined 1
--#elif __STDINT_EXP(INT_MAX) == 0x7fffffffL
-+#if __STDINT_EXP(INT_MAX) == 0x7fffffffL
- typedef signed int int32_t;
- typedef unsigned int uint32_t;
- #define __int32_t_defined 1
-+#elif __have_long32
-+typedef signed long int32_t;
-+typedef unsigned long uint32_t;
-+#define __int32_t_defined 1
- #elif __STDINT_EXP(SHRT_MAX) == 0x7fffffffL
- typedef signed short int32_t;
- typedef unsigned short uint32_t;
 diff -Nbaur newlib-2.0.0/newlib/libc/include/stdio.h newlib-2.0.0-ppc/newlib/libc/include/stdio.h
 --- newlib-2.0.0/newlib/libc/include/stdio.h	2012-11-01 11:51:11.000000000 +0000
 +++ newlib-2.0.0-ppc/newlib/libc/include/stdio.h	2013-09-06 22:13:38.000000000 +0100

dkppc/rules/wiiu_rules

@@ -0,0 +1,12 @@
+ifeq ($(strip $(DEVKITPPC)),)
+$(error "Please set DEVKITPPC in your environment. export DEVKITPPC=<path to>devkitPro/devkitPPC)
+endif
+
+MACHDEP = -DESPRESSO -mwup -mcpu=750 -meabi -mhard-float
+
+include $(DEVKITPPC)/base_rules
+
+#---------------------------------------------------------------------------------
+%.elf:
+	@echo linking ... $(notdir $@)
+	@$(LD)  $^ $(LDFLAGS) $(LIBPATHS) $(LIBS) -o $@

dkppc/scripts/build-gcc.sh

@@ -16,7 +16,7 @@ then
 	--prefix=$prefix --target=$target --disable-nls --disable-shared --disable-debug \
 	--disable-werror \
 	--enable-poison-system-directories \
-	--enable-plugins --enable-lto --disable-dependency-tracking \
+	--enable-plugins --enable-lto \
 	--disable-werror $CROSS_PARAMS \
 	|| { echo "Error configuing ppc binutils"; exit 1; }
 	touch configured-binutils
@@ -47,7 +47,6 @@ if [ ! -f configured-binutils ]
 then
 	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
 	--prefix=$prefix --target=mn10200 --disable-nls --disable-debug \
-	--disable-dependency-tracking \
 	--disable-werror $CROSS_PARAMS \
 	|| { echo "Error configuing mn10200 binutils"; exit 1; }
 	touch configured-binutils
@@ -82,12 +81,13 @@ then
 	--disable-nls --disable-shared --enable-threads --disable-multilib \
 	--disable-win32-registry \
 	--disable-libstdcxx-pch \
+	--disable-libstdcxx-verbose \
+	--enable-cxx-flags='-ffunction-sections -fdata-sections' \
 	--target=$target \
 	--with-newlib \
 	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 	--prefix=$prefix\
-	--disable-dependency-tracking \
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 27" \
+	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 28" \
 	$CROSS_PARAMS \
 	|| { echo "Error configuring gcc stage 1"; exit 1; }
 	touch configured-gcc
@@ -170,7 +170,7 @@ cd $target/gdb
 if [ ! -f configured-gdb ]
 then
 	CFLAGS="$cflags" LDFLAGS="$ldflags" ../../gdb-$GDB_VER/configure \
-	--disable-nls --prefix=$prefix --target=$target --disable-werror --disable-dependency-tracking\
+	--disable-nls --prefix=$prefix --target=$target --disable-werror \
 	$CROSS_PARAMS || { echo "Error configuring gdb"; exit 1; }
 	touch configured-gdb
 fi

select_toolchain.sh

@@ -40,10 +40,10 @@ case "$VERSION" in
     toolchain=DEVKITARM
   ;;
   "2" )
-    GCC_VER=4.8.2
-    BINUTILS_VER=2.24
+    GCC_VER=6.2.0
+    BINUTILS_VER=2.27
     NEWLIB_VER=2.0.0
-    GDB_VER=7.7
+    GDB_VER=7.11
     basedir='dkppc'
     package=devkitPPC
     target=powerpc-eabi