enable buildscripts for release

DSi firmware requires arm7 code to start in ewram

.gitignore

@@ -2,3 +2,6 @@ config.sh
 .devkitARM*
 .devkitPPC*
 .devkitPSP*
+*.gz
+*.bz2
+*~

README.TXT

@@ -1,59 +1,70 @@
 devkitPro build scripts
 --------------------------
 
-This readme will guide you through building devkitARM, devkitPPC or devkitPSP from source using a set of scripts.
+This readme will guide you through building devkitARM, devkitPPC or devkitPSP
+from source using a set of scripts.
 
-To use these scripts under minsys and MinGW you will need some additional packages over and above the base install.
+The windows versions of the toolchains are now cross compiled on linux using
+mingw-w64
 
-The minsys developer toolkit
+Preparing to build
-
+--------------------------
-http://prdownloads.sourceforge.net/mingw/msysDTK-1.0.1.exe?download
-
-Bison, Flex and Wget from the gnuwin32 project
-
-http://sourceforge.net/projects/gnuwin32/
-
-For devkitPSP a command line subversion client is required to get the PSP SDK http://www.tigris.org
 
 required packages for building on debian/*buntu
 
-sudo apt-get install build-essential autoconf automake bison flex libncurses5-dev libreadline-dev texinfo
+sudo apt-get install build-essential autoconf automake bison flex libncurses5-dev
+libreadline-dev texinfo pkg-config
 
-for building gcc libgmp, libmpfr and libmpc are required
+For building gcc libgmp, libmpfr and libmpc are required - these are built as
+static libraries to make packaging simpler. If you're building the tools for
+personal use then the versions packaged by your chosen distro should suffice.
 
 http://gmplib.org/
 http://www.mpfr.org/
 http://www.multiprecision.org/
 
-Some of the tools for devkitARM and devkitPPC also require FreeImage and zlib
+sudo apt-get install libgmp-dev libmpfr-dev libmpc-dev
+
+Some of the tools for devkitARM and devkitPPC also require FreeImage, zlib,
+and libusb. Again these are built as static libraries for ease of packaging
+but you can probably use the versions supplied by your distro.
 
 http://freeimage.sourceforge.net/
 http://www.zlib.net
- 
+http://www.libusb.org
-Downloading the source packages
--------------------------------
 
-When you run the build script it will ask you to choose from one of two options, one for if you have already downloaded the source packages and another for if you want it to download them for you (using wget or curl).
+sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev
+
+Building gxtexconv for cube/wii needs GL/gl.h which can be obtained with
+
+sudo apt-get install mesa-common-dev
+
+To avoid having to manually answer prompts during the build the script will
+read variables from config.sh if it exists. Copy config.sh.sample to config.sh
+and set the variables as appropriate for your build.
+
+The script will download the source packages it needs. These will be downloaded
+to the script directory by default but you can set BUILD_DKPRO_SRCDIR if you want
+to put them somewhere else.  When its finished you have the option to delete
+all temporary files, sources and their source packages.
 
-The top level shell script has now been unified and offers the option of devkitARM, devkitPPC or devkitPSP.
 
 Building the devkits
 --------------------
 
-Simply run the "build-devkit.sh" script in the same directory as this text file as shown below, then follow the prompts;
+Simply run the "build-devkit.sh" script in the same directory as this text file
+as shown below, then follow the prompts;
 
 ./build-devkit.sh
 
-Once the script finds the source packages they will be decompressed and the build process will begin.  When its finished you have the option to delete all temporary files, sources and their source packages.
+Several examples tarballs are provided for the platforms supported by devkitARM &
-
+devkitPPC, these include basic templates for starting your own projects.
-To avoid having to manually answer prompts during the build the script will read variables from config.sh if it exists. Copy config.sh.sample to config.sh and set the variables as appropriate for your build.
+See http://wiki.devkitpro.org/index.php/Getting_Started for links.
-
-Several examples tarballs are provided for the platforms supported by devkitARM & devkitPPC, these include basic templates for starting your own projects. See http://wiki.devkitpro.org/index.php/Getting_Started for links.
 
 Using devkitARM
 ---------------
 
-to use the built in crt0 and linkscript use arm-eabi-gcc to link your project
+to use the built in crt0 and linkscript use arm-none-eabi-gcc to link your project
 
 Several specs files are built in for the various platforms
 
@@ -65,25 +76,31 @@ Several specs files are built in for the various platforms
 	-specs=ds_cart for a DS arm7 binary which runs from GBA cart.
 	-specs=gp32.specs for standard GP32 app.
 	-specs=gp32_gpsdk.specs for official gamepark SDK GP32 app.
+	-specs=3dsx.specs for a 3DS homebrew binary.
 
 Using devkitPPC
 ---------------
 
-to use the built in crt0 and linkscript use powerpc-gekko-gcc to link your project, using the command line switch -mgcn for a bare bones system, -mogc to use libogc and the multi-threaded microkernel for gamecube, -mrvl for wii.
+to use the built in crt0 and linkscript use powerpc-eabi-gcc to link your project,
+using the command line switch -mgcn for a bare bones system, -mogc to use libogc and
+the multi-threaded microkernel for gamecube, -mrvl for wii, -mwup for wii u.
 
 Using devkitPSP
 ---------------
 
-All you need to do now to use devkitPSP is make sure that your freshly built tools are in your PATH, something like this;
+All you need to do now to use devkitPSP is make sure that your freshly built tools
+are in your PATH, something like this;
 
 export PATH=$PATH:<path to devkitPSP>/bin
 
-(Obviously replace <path to devkitPSP> with the full path to the devkitPSP installation directory)
+(Obviously replace <path to devkitPSP> with the full path to the devkitPSP
+installation directory)
 
 Getting started
 ---------------
 
-The best thing to do next is test the compiler, so grab an examples tarball from sourceforge & run make in the top level.
+The best thing to do next is test the compiler, so grab an examples tarball
+from sourceforge & run make in the top level.
 
 Credits
 -------
@@ -91,6 +108,7 @@ Credits
 * Thanks to WinterMute for bringing us devkitPro, the website is http://www.devkitpro.org
 * Build scripts written by WinterMute and tied together by GreenGianT
 * Thanks to Mr Spiv, Honkey Kong, Raleigh and JoostP for OS X testing
+* libctru by Smealum, YellowS8, fincs, mtheall & WinterMute with contributions from many others.
 * libogc written and supplied by Shagkur. Additional code by WinterMute, Bushing, Marcan & Tybor
 * libgba by WinterMute
 * libnds by Joat, Dovoto and WinterMute with contributions from many others.

build-devkit.sh

@@ -1,18 +1,16 @@
 #!/bin/bash
 #---------------------------------------------------------------------------------
-# Build scripts for
+#	devkitARM release 46
-#	devkitARM release 38
+#	devkitPPC release 29
-#	devkitPPC release 26
-#	devkitPSP release 17
 #---------------------------------------------------------------------------------
 
-if [ 1 -eq 1 ] ; then
+if [ 0 -eq 1 ] ; then
 	echo "Currently in release cycle, proceed with caution, do not report problems, do not ask for support."
 	echo "Please use the latest release buildscripts unless advised otherwise by devkitPro staff."
 	echo "http://sourceforge.net/projects/devkitpro/files/buildscripts/"
 	echo
-	echo "The scripts in svn are quite often dependent on things which currently only exist on developer"
+	echo "The scripts in the git repository are quite often dependent on things which currently only exist"
-	echo "machines. This is not a bug, use stable releases."
+	echo "on developer machines. This is not a bug, use stable releases."
 	exit 1
 fi
 
@@ -24,49 +22,52 @@ echo "Patches and improvements are of course welcome, please send these to the p
 echo "https://sourceforge.net/tracker/?group_id=114505&atid=668553"
 echo
 
-LIBOGC_VER=1.8.10
+
-LIBGBA_VER=20090222
-LIBNDS_VER=1.5.5
-DEFAULT_ARM7_VER=0.5.24
-DSWIFI_VER=0.3.13
-LIBMIRKO_VER=0.9.7
-MAXMOD_VER=1.0.7
-FILESYSTEM_VER=0.9.9
-LIBFAT_VER=1.0.11
-PSPSDK_VER=20120404
-GBATOOLS_VER=1.0.0
-GRIT_VER=0.8.10
-NDSTOOL_VER=1.50.1
 GENERAL_TOOLS_VER=1.0.0
+
+LIBGBA_VER=0.5.0
+GBATOOLS_VER=1.0.0
+
+LIBNDS_VER=1.6.0
+DEFAULT_ARM7_VER=0.7.0
+DSWIFI_VER=0.4.0
+MAXMOD_VER=1.0.10
+FILESYSTEM_VER=0.9.13
+LIBFAT_VER=1.1.0
+DSTOOLS_VER=1.1.0
+GRIT_VER=0.8.14
+NDSTOOL_VER=2.0.1
 DLDITOOL_VER=1.24.0
-GXTEXCONV_VER=0.1.9
-GCDSPSUITE_VER=1.4.0
-ELF2DOL_VER=1.0.0
-WIILOAD_VER=0.5.1
 MMUTIL_VER=1.8.6
 
+DFU_UTIL_VER=0.9.1
+STLINK_VER=1.2.1
+
+GAMECUBE_TOOLS_VER=1.0.1
+LIBOGC_VER=1.8.16
+WIILOAD_VER=0.5.1
+
+LIBCTRU_VER=1.2.0
+CITRO3D_VER=1.2.0
+TOOLS3DS_VER=1.1.4
+LINK3DS_VER=0.5.1
+PICASSO_VER=2.5.0
+
+GP32_TOOLS_VER=1.0.1
+LIBMIRKO_VER=0.9.7
+
 #---------------------------------------------------------------------------------
 function extract_and_patch {
 #---------------------------------------------------------------------------------
-	if [ ! -f extracted-$1 ]; then
+	if [ ! -f extracted-$1-$2 ]; then
-		echo "extracting $1"
+		echo "extracting $1-$2"
-		if [ $3 == "bz2" ]; then
+		tar -xf "$SRCDIR/$1-$2.tar.$3" || { echo "Error extracting "$1; exit 1; }
-			extractflags="-xjf"
+		touch extracted-$1-$2
-			archivetype=".tar.bz2"
-		elif [ $3 == "gz" ]; then
-			extractflags="-xzf"
-			archivetype=".tar.gz"
-		else
-			echo "invalid archive type"
-			exit 1
-		fi
-		tar $extractflags $SRCDIR/$1-$2$archivetype || { echo "Error extracting "$1; exit 1; }
-		touch extracted-$1
 	fi
-	if [[ ! -f patched-$1 && -f $patchdir/$1-$2.patch ]]; then
+	if [[ ! -f patched-$1-$2 && -f $patchdir/$1-$2.patch ]]; then
-		echo "patching $1"
+		echo "patching $1-$2"
 		patch -p1 -d $1-$2 -i $patchdir/$1-$2.patch || { echo "Error patching $1"; exit 1; }
-		touch patched-$1
+		touch patched-$1-$2
 	fi
 }
 
@@ -87,7 +88,7 @@ unset LDFLAGS
 #---------------------------------------------------------------------------------
 # Look for automated configuration file to bypass prompts
 #---------------------------------------------------------------------------------
- 
+
 echo -n "Looking for configuration file... "
 if [ -f ./config.sh ]; then
   echo "Found."
@@ -109,7 +110,7 @@ else
 	echo "for mingw/msys you must use <drive>:/<install path> or you will have include path problems"
 	echo "this is the top level directory for devkitpro, i.e. e:/devkitPro"
 
-	read INSTALLDIR
+	read -e INSTALLDIR
 	echo
 fi
 
@@ -154,7 +155,7 @@ fi
 if [ "$BUILD_DKPRO_AUTOMATED" != "1" ] ; then
 
 	echo
-	echo 'Ready to install '$package' in '$INSTALLDIR
+	echo 'Ready to install '$package' in '$prefix
 	echo
 	echo 'press return to continue'
 
@@ -164,10 +165,8 @@ PLATFORM=`uname -s`
 
 case $PLATFORM in
 	Darwin )
-		cflags="-mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc"
+		cflags="-mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk -I/usr/local/include"
-		ldflags="-mmacosx-version-min=10.4 -arch i386 -arch ppc -Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk"
+		ldflags="-mmacosx-version-min=10.5 -Wl,-syslibroot,/Developer/SDKs/MacOSX10.5.sdk -L/usr/local/lib"
-		export CC=gcc-4.0
-		export CXX=g++-4.0
     ;;
 	MINGW32* )
 		cflags="-D__USE_MINGW_ACCESS"
@@ -189,23 +188,28 @@ scriptdir=$(pwd)/$basedir/scripts
 archives="binutils-${BINUTILS_VER}.tar.bz2 gcc-${GCC_VER}.tar.bz2 newlib-${NEWLIB_VER}.tar.gz gdb-${GDB_VER}.tar.bz2"
 
 if [ $VERSION -eq 1 ]; then
+
 	targetarchives="libnds-src-${LIBNDS_VER}.tar.bz2 libgba-src-${LIBGBA_VER}.tar.bz2
 		libmirko-src-${LIBMIRKO_VER}.tar.bz2 dswifi-src-${DSWIFI_VER}.tar.bz2 maxmod-src-${MAXMOD_VER}.tar.bz2
-		default-arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
+		default_arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
-		libfat-src-${LIBFAT_VER}.tar.bz2"
+		libfat-src-${LIBFAT_VER}.tar.bz2 libctru-src-${LIBCTRU_VER}.tar.bz2  citro3d-src-${CITRO3D_VER}.tar.bz2"
-	hostarchives="gbatools-$GBATOOLS_VER.tar.bz2 grit-$GRIT_VER.tar.bz2 ndstool-$NDSTOOL_VER.tar.bz2
+
-		general-tools-$GENERAL_TOOLS_VER.tar.bz2 dlditool-$DLDITOOL_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2"
+	hostarchives="gbatools-$GBATOOLS_VER.tar.bz2 gp32tools-$GP32_TOOLS_VER.tar.bz2
+		dstools-$DSTOOLS_VER.tar.bz2 grit-$GRIT_VER.tar.bz2 ndstool-$NDSTOOL_VER.tar.bz2
+		general-tools-$GENERAL_TOOLS_VER.tar.bz2 dlditool-$DLDITOOL_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2
+		dfu-util-$DFU_UTIL_VER.tar.bz2 stlink-$STLINK_VER.tar.bz2 3dstools-$TOOLS3DS_VER.tar.bz2
+		picasso-$PICASSO_VER.tar.bz2 3dslink-$LINK3DS_VER.tar.bz2"
 fi
 
 if [ $VERSION -eq 2 ]; then
+
 	targetarchives="libogc-src-${LIBOGC_VER}.tar.bz2 libfat-src-${LIBFAT_VER}.tar.bz2"
-	hostarchives="gxtexconv-$GXTEXCONV_VER.tar.bz2 gcdspsuite-$GCDSPSUITE_VER.tar.bz2
+
-			wiiload-$WIILOAD_VER.tar.bz2 elf2dol-$ELF2DOL_VER.tar.bz2 general-tools-$GENERAL_TOOLS_VER.tar.bz2"
+	hostarchives="gamecube-tools-$GAMECUBE_TOOLS_VER.tar.bz2 wiiload-$WIILOAD_VER.tar.bz2 general-tools-$GENERAL_TOOLS_VER.tar.bz2"
+
+	archives="binutils-${MN_BINUTILS_VER}.tar.bz2 $archives"
 fi
 
-if [ $VERSION -eq 3 ]; then
-	targetarchives="pspsdk-src-${PSPSDK_VER}.tar.bz2"
-fi
 
 if [ ! -z "$BUILD_DKPRO_SRCDIR" ] ; then
 	SRCDIR="$BUILD_DKPRO_SRCDIR"
@@ -213,7 +217,7 @@ else
 	SRCDIR=`pwd`
 fi
 
-cd $SRCDIR
+cd "$SRCDIR"
 for archive in $archives $targetarchives $hostarchives
 do
 	echo $archive
@@ -228,23 +232,29 @@ cd $BUILDDIR
 
 extract_and_patch binutils $BINUTILS_VER bz2
 extract_and_patch gcc $GCC_VER bz2
-rm -fr gcc-$GCC_VER/zlib
 extract_and_patch newlib $NEWLIB_VER gz
 extract_and_patch gdb $GDB_VER bz2
 
+if [ $VERSION -eq 2 ]; then
+	extract_and_patch binutils $MN_BINUTILS_VER bz2
+fi
+
 for archive in $targetarchives
 do
 	destdir=$(echo $archive | sed -e 's/\(.*\)-src-\(.*\)\.tar\.bz2/\1-\2/' )
 	echo $destdir
 	if [ ! -d $destdir ]; then
 		mkdir -p $destdir
-		bzip2 -cd $SRCDIR/$archive | tar -xf - -C $destdir || { echo "Error extracting "$archive; exit 1; }
+		bzip2 -cd "$SRCDIR/$archive" | tar -xf - -C $destdir || { echo "Error extracting "$archive; exit 1; }
 	fi
 done
 
 for archive in $hostarchives
 do
-	tar -xjf $SRCDIR/$archive
+	destdir=$(echo $archive | sed -e 's/\(.*\)-src-\(.*\)\.tar\.bz2/\1-\2/' )
+	if [ ! -d $destdir ]; then
+		tar -xjf "$SRCDIR/$archive"
+	fi
 done
 
 #---------------------------------------------------------------------------------
@@ -254,12 +264,15 @@ if [ -f $scriptdir/build-gcc.sh ]; then . $scriptdir/build-gcc.sh || { echo "Err
 if [ -f $scriptdir/build-tools.sh ]; then . $scriptdir/build-tools.sh || { echo "Error building tools"; exit 1; }; cd $BUILDSCRIPTDIR; fi
 if [ -f $scriptdir/build-crtls.sh ]; then . $scriptdir/build-crtls.sh || { echo "Error building crtls"; exit 1; }; cd $BUILDSCRIPTDIR; fi
 
-if [ "$CROSSBUILD" = "i686-w64-mingw32" ]; then
+if [ ! -z $CROSSBUILD ]; then
 	if [ $VERSION -ne 3 ]; then
-		cp -v 	/opt/i686-w64-mingw32/mingw/lib/FreeImage.dll $prefix/bin
+		cp -v $CROSSBINPATH/FreeImage.dll $prefix/bin
 	fi
-	cp -v	/opt/i686-w64-mingw32/mingw/lib/libstdc++-6.dll \
+	if [ $VERSION -eq 1 ]; then
-		/opt/i686-w64-mingw32/mingw/lib/libgcc_s_sjlj-1.dll \
+		cp -v $CROSSBINPATH/libusb-1.0.dll $prefix/bin
+	fi
+	cp -v	$CROSSLIBPATH/libstdc++-6.dll \
+		$CROSSLIBPATH/libgcc_s_sjlj-1.dll \
 		$prefix/bin
 fi
 

config.sh.sample

@@ -13,15 +13,6 @@
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_PACKAGE=0
 
-#---------------------------------------------------------------------------------
-# Download source packages
-#---------------------------------------------------------------------------------
-#   0: User selects manually
-#   1: already downloaded
-#   2: download packages
-#---------------------------------------------------------------------------------
-BUILD_DKPRO_DOWNLOAD=0
-
 #---------------------------------------------------------------------------------
 # Toolchain installation directory, comment if not specified
 #---------------------------------------------------------------------------------
@@ -36,7 +27,7 @@ BUILD_DKPRO_DOWNLOAD=0
 #---------------------------------------------------------------------------------
 # Automated script execution
 #---------------------------------------------------------------------------------
-#  0: Ask to delete build folders & patched sources 
+#  0: Ask to delete build folders & patched sources
-#  1: Use defaults, don't pause for answers 
+#  1: Use defaults, don't pause for answers
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_AUTOMATED=0

cross-build-i686-w64-mingw32.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
 export CROSSBUILD=i686-w64-mingw32
-export PATH=/opt/i686-w64-mingw32/bin:$PATH
+export CROSSLIBPATH=/opt/mingw32/mingw/lib
+export CROSSBINPATH=/opt/mingw32/mingw/bin
+export PATH=/opt/mingw32/bin:$PATH
+export PKG_CONFIG_PATH=
+export PKG_CONFIG_LIBDIR=$CROSSLIBPATH/pkgconfig

cross-build-x86_64-w64-mingw32.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+export CROSSBUILD=x86_64-w64-mingw32
+export CROSSLIBPATH=/opt/x86_64-mingw-w64/mingw/lib
+export CROSSBINPATH=/opt/x86_64-mingw-w64/mingw/bin
+export PATH=/opt/x86_64-mingw-w64/bin:$PATH
+export PKG_CONFIG_PATH=$CROSSLIBPATH/pkgconfig
+

dkarm-eabi/crtls/3dsx.ld

@@ -0,0 +1,186 @@
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+
+PHDRS
+{
+	code   PT_LOAD FLAGS(5) /* Read | Execute */;
+	rodata PT_LOAD FLAGS(4) /* Read */;
+	data   PT_LOAD FLAGS(6) /* Read | Write */;
+}
+
+SECTIONS
+{
+	/* =========== CODE section =========== */
+
+	PROVIDE(__start__ = 0x100000);
+	. = __start__;
+
+	.text ALIGN(0x1000) :
+	{
+		/* .init */
+		KEEP( *(.crt0) )
+		KEEP( *(.init) )
+		. = ALIGN(4);
+
+		/* .text */
+		*(.text)
+		*(.text.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.stub)
+		*(.gnu.warning)
+		*(.gnu.linkonce.t*)
+		. = ALIGN(4);
+
+		/* .fini */
+		KEEP( *(.fini) )
+		. = ALIGN(4);
+	} : code
+
+	/* =========== RODATA section =========== */
+
+	.rodata ALIGN(0x1000) :
+	{
+		*(.rodata)
+		*(.roda)
+		*(.rodata.*)
+		*all.rodata*(*)
+		*(.gnu.linkonce.r*)
+		SORT(CONSTRUCTORS)
+		. = ALIGN(4);
+	} : rodata
+
+	.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } : rodata
+	__exidx_start = .;
+	ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } : rodata
+	__exidx_end = .;
+
+	/* =========== DATA section =========== */
+
+	.data ALIGN(0x1000) :
+	{
+		*(.data)
+		*(.data.*)
+		*(.gnu.linkonce.d*)
+		CONSTRUCTORS
+		. = ALIGN(4);
+	} : data
+
+	.tdata ALIGN(4) :
+	{
+		__tdata_lma = .;
+		*(.tdata)
+		*(.tdata.*)
+		*(.gnu.linkonce.td.*)
+		. = ALIGN(4);
+		__tdata_lma_end = .;
+	} : data
+
+	.tbss ALIGN(4) :
+	{
+		*(.tbss)
+		*(.tbss.*)
+		*(.gnu.linkonce.tb.*)
+		*(.tcommon)
+		. = ALIGN(4);
+	} : data
+
+	.preinit_array ALIGN(4) :
+	{
+		PROVIDE (__preinit_array_start = .);
+		KEEP (*(.preinit_array))
+		PROVIDE (__preinit_array_end = .);
+	} : data
+
+	.init_array ALIGN(4) :
+	{
+		PROVIDE (__init_array_start = .);
+		KEEP (*(SORT(.init_array.*)))
+		KEEP (*(.init_array))
+		PROVIDE (__init_array_end = .);
+	} : data
+
+	.fini_array ALIGN(4) :
+	{
+		PROVIDE (__fini_array_start = .);
+		KEEP (*(.fini_array))
+		KEEP (*(SORT(.fini_array.*)))
+		PROVIDE (__fini_array_end = .);
+	} : data
+
+	.ctors ALIGN(4) :
+	{
+		KEEP (*crtbegin.o(.ctors)) /* MUST be first -- GCC requires it */
+		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+		KEEP (*(SORT(.ctors.*)))
+		KEEP (*(.ctors))
+	} : data
+
+	.dtors ALIGN(4) :
+	{
+		KEEP (*crtbegin.o(.dtors))
+		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+		KEEP (*(SORT(.dtors.*)))
+		KEEP (*(.dtors))
+	} : data
+
+	__bss_start__ = .;
+	.bss ALIGN(4) :
+	{
+		*(.dynbss)
+		*(.bss)
+		*(.bss.*)
+		*(.gnu.linkonce.b*)
+		*(COMMON)
+		. = ALIGN(4);
+
+		/* Reserve space for the TLS segment of the main thread */
+		__tls_start = .;
+		. += + SIZEOF(.tdata) + SIZEOF(.tbss);
+		__tls_end = .;
+	} : data
+	__bss_end__ = .;
+
+	__end__ = ABSOLUTE(.) ;
+
+	/* ==================
+	   ==== Metadata ====
+	   ================== */
+
+	/* Discard sections that difficult post-processing */
+	/DISCARD/ : { *(.group .comment .note) }
+
+	/* Stabs debugging sections. */
+	.stab          0 : { *(.stab) }
+	.stabstr       0 : { *(.stabstr) }
+	.stab.excl     0 : { *(.stab.excl) }
+	.stab.exclstr  0 : { *(.stab.exclstr) }
+	.stab.index    0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+
+	/* DWARF debug sections.
+	   Symbols in the DWARF debugging sections are relative to the beginning
+	   of the section so we begin them at 0. */
+
+	/* DWARF 1 */
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+
+	/* GNU DWARF 1 extensions */
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+
+	/* DWARF 1.1 and DWARF 2 */
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+
+	/* DWARF 2 */
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+}

dkarm-eabi/crtls/3dsx.specs

@@ -0,0 +1,8 @@
+%rename link                old_link
+
+*link:
+%(old_link) -T 3dsx.ld%s -d --emit-relocs --use-blx --gc-sections
+
+*startfile:
+3dsx_crt0%O%s crti%O%s crtbegin%O%s
+

dkarm-eabi/crtls/3dsx_crt0.s

@@ -0,0 +1,73 @@
+@---------------------------------------------------------------------------------
+@ 3DS processor selection
+@---------------------------------------------------------------------------------
+	.cpu mpcore
+@---------------------------------------------------------------------------------
+
+@---------------------------------------------------------------------------------
+	.section ".crt0","ax"
+	.global _start, __service_ptr, __apt_appid, __heap_size, __linear_heap_size, __system_arglist, __system_runflags
+@---------------------------------------------------------------------------------
+	.align 2
+	.arm
+@---------------------------------------------------------------------------------
+_start:
+@---------------------------------------------------------------------------------
+	b startup
+	.ascii "_prm"
+__service_ptr:
+	.word 0 @ Pointer to service handle override list -- if non-NULL it is assumed that we have been launched from a homebrew launcher
+__apt_appid:
+	.word 0x300 @ Program APPID
+__heap_size:
+	.word 24*1024*1024 @ Default heap size (24 MiB)
+__linear_heap_size:
+	.word 32*1024*1024 @ Default linear heap size (32 MiB)
+__system_arglist:
+	.word 0 @ Pointer to argument list (argc (u32) followed by that many NULL terminated strings)
+__system_runflags:
+	.word 0 @ Flags to signal runtime restrictions to ctrulib
+startup:
+	@ Save return address
+	mov r4, lr
+
+	@ Clear the BSS section
+	ldr r0, =__bss_start__
+	ldr r1, =__bss_end__
+	sub r1, r1, r0
+	bl  ClearMem
+
+	@ System initialization
+	mov r0, r4
+	bl initSystem
+
+	@ Set up argc/argv arguments for main()
+	ldr r0, =__system_argc
+	ldr r1, =__system_argv
+	ldr r0, [r0]
+	ldr r1, [r1]
+
+	@ Jump to user code
+	ldr r3, =main
+	ldr lr, =__ctru_exit
+	bx  r3
+
+@---------------------------------------------------------------------------------
+@ Clear memory to 0x00 if length != 0
+@  r0 = Start Address
+@  r1 = Length
+@---------------------------------------------------------------------------------
+ClearMem:
+@---------------------------------------------------------------------------------
+	mov  r2, #3     @ Round down to nearest word boundary
+	add  r1, r1, r2 @ Shouldn't be needed
+	bics r1, r1, r2	@ Clear 2 LSB (and set Z)
+	bxeq lr         @ Quit if copy size is 0
+
+	mov	r2, #0
+ClrLoop:
+	stmia r0!, {r2}
+	subs  r1, r1, #4
+	bne   ClrLoop
+
+	bx lr

dkarm-eabi/crtls/Makefile

@@ -3,3 +3,11 @@ include $(DEVKITARM)/base_rules
 all:
 	$(CC)  -x assembler-with-cpp -marm -c $(CRT)_crt0.s -o$(CRT)_crt0.o
 	$(CC)  -x assembler-with-cpp -mthumb -c $(CRT)_crt0.s -o thumb/$(CRT)_crt0.o
+
+ds_arm7_vram_crt0:
+	$(CC)  -x assembler-with-cpp -marm -c -DVRAM ds_arm7_crt0.s -ods_arm7_vram_crt0.o
+	$(CC)  -x assembler-with-cpp -mthumb -c -DVRAM ds_arm7_crt0.s -othumb/ds_arm7_vram_crt0.o
+
+3dsx_crt0:
+	$(CC) -march=armv6k -mfloat-abi=hard -c 3dsx_crt0.s -o armv6k/fpu/3dsx_crt0.o
+

dkarm-eabi/crtls/dldi.ld

@@ -14,10 +14,10 @@ MEMORY {
 
 SECTIONS
 {
-	.init	:
+	.crt0	:
 	{
 		__text_start = . ;
-		KEEP (*(.init))
+		KEEP (*(.crt0))
 		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
 	} >ddmem = 0xff
 

dkarm-eabi/crtls/ds_arm7.ld

@@ -2,10 +2,21 @@ OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
 ENTRY(_start)
 
-MEMORY {
 
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
+PHDRS {
-	iwram	: ORIGIN = 0x037f8000, LENGTH = 96K	
+	crt0  PT_LOAD FLAGS(7);
+	arm7  PT_LOAD FLAGS(7);
+	arm7i PT_LOAD FLAGS(0x100007);
+}
+
+
+MEMORY {
+	ewram  : ORIGIN = 0x02380000, LENGTH = 12M - 512K
+	rom    : ORIGIN = 0x08000000, LENGTH = 32M
+	iwram  : ORIGIN = 0x037f8000, LENGTH = 96K
+
+	twl_ewram : ORIGIN = 0x02e80000, LENGTH = 512K - 64K
+	twl_iwram : ORIGIN = 0x03000000, LENGTH = 256K
 }
 
 __iwram_start	=	ORIGIN(iwram);
@@ -21,30 +32,57 @@ __irq_vector	=	0x04000000 - 4;
 
 SECTIONS
 {
-	.init	:
-	{
-		__text_start = . ;
-		KEEP (*(.init))
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		} >iwram = 0xff
-	.plt : { *(.plt) } >iwram = 0xff
 
-	.text :   /* ALIGN (4): */
+	.twl :
 	{
+		__arm7i_lma__ = LOADADDR(.twl);
+		__arm7i_start__ = .;
+		*(.twl)
+		*.twl*(.text .stub .text.* .gnu.linkonce.t.*)
+		*.twl*(.rodata)
+		*.twl*(.roda)
+		*.twl*(.rodata.*)
+		*.twl*(.data)
+		*.twl*(.data.*)
+		*.twl*(.gnu.linkonce.d*)
+		__arm7i_end__ = .;
+	} >twl_iwram AT>twl_ewram :arm7i
+
+	.twl_bss ALIGN(4) (NOLOAD) :
+	{
+		__twl_bss_start__ = .;
+		*(.twl_bss)
+		*.twl.*(.dynbss)
+		*.twl.*(.gnu.linkonce.b*)
+		*.twl.*(.bss*)
+		*.twl.*(COMMON)
+		__twl_bss_end__ = .;
+	} >twl_iwram :NONE
+
+	.crt0	:
+	{
+		KEEP (*(.crt0))
+		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+	} >ewram :crt0
+
+	.text :
+	{
+		__arm7_lma__ = LOADADDR(.text);
+		__arm7_start__ = .;
+		KEEP (*(SORT_NONE(.init)))
+		*(.plt)
 		*(.text .stub .text.* .gnu.linkonce.t.*)
 		KEEP (*(.text.*personality*))
 		/* .gnu.warning sections are handled specially by elf32.em.  */
 		*(.gnu.warning)
 		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
 		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
+	} >iwram AT>ewram :arm7
 
 	.fini           :
 	{
 		KEEP (*(.fini))
-	} >iwram =0xff
+	} >iwram AT>ewram
-
-	__text_end = . ;
 
 	.rodata :
 	{
@@ -55,27 +93,38 @@ SECTIONS
 		*(.gnu.linkonce.r*)
 		SORT(CONSTRUCTORS)
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
+	} >iwram AT>ewram
 
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >iwram
+	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >iwram AT>ewram
-	__exidx_start = .;
+
-	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >iwram
+	.ARM.exidx   : {
-	__exidx_end = .;
+		__exidx_start = .;
+		*(.ARM.exidx* .gnu.linkonce.armexidx.*)
+		__exidx_end = .;
+	 } >iwram AT>ewram
 
 /* Ensure the __preinit_array_start label is properly aligned.  We
    could instead move the label definition inside the section, but
    the linker would then create the section even if it turns out to
    be empty, which isn't pretty.  */
-	. = ALIGN(32 / 8);
+	.preinit_array     : {
-	PROVIDE (__preinit_array_start = .);
+		. = ALIGN(32 / 8);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >iwram = 0xff
+		PROVIDE (__preinit_array_start = .);
-	PROVIDE (__preinit_array_end = .);
+		KEEP (*(.preinit_array))
-	PROVIDE (__init_array_start = .);
+		PROVIDE (__preinit_array_end = .);
-	.init_array     : { KEEP (*(.init_array)) } >iwram = 0xff
+	} >iwram AT>ewram
-	PROVIDE (__init_array_end = .);
+
-	PROVIDE (__fini_array_start = .);
+	.init_array     : {
-	.fini_array     : { KEEP (*(.fini_array)) } >iwram = 0xff
+		PROVIDE (__init_array_start = .);
-	PROVIDE (__fini_array_end = .);
+		KEEP (*(.init_array))
+		PROVIDE (__init_array_end = .);
+	} >iwram AT>ewram
+
+	.fini_array     : {
+		PROVIDE (__fini_array_start = .);
+		KEEP (*(.fini_array))
+		PROVIDE (__fini_array_end = .);
+	} >iwram AT>ewram
 
 	.ctors :
 	{
@@ -90,7 +139,7 @@ SECTIONS
 		KEEP (*(SORT(.ctors.*)))
 		KEEP (*(.ctors))
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
+	} >iwram AT>ewram
 
 	.dtors :
 	{
@@ -99,21 +148,21 @@ SECTIONS
 		KEEP (*(SORT(.dtors.*)))
 		KEEP (*(.dtors))
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
+	} >iwram AT>ewram
 
 	.eh_frame :
 	{
 		KEEP (*(.eh_frame))
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
+	} >iwram AT>ewram
 
 	.gcc_except_table :
 	{
 		*(.gcc_except_table)
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >iwram = 0xff
+	} >iwram AT>ewram
-	.jcr            : { KEEP (*(.jcr)) } >iwram = 0
+	.jcr            : { KEEP (*(.jcr)) } >iwram AT>ewram
-	.got            : { *(.got.plt) *(.got) } >iwram = 0
+	.got            : { *(.got.plt) *(.got) } >iwram AT>ewram
 
 	.data ALIGN(4) : 	{
 		__data_start = ABSOLUTE(.);
@@ -123,10 +172,11 @@ SECTIONS
 		CONSTRUCTORS
 		. = ALIGN(4);
 		__data_end = ABSOLUTE(.) ;
-	} >iwram = 0xff
+	} >iwram AT>ewram
 
-	.bss ALIGN(4) :
+	.bss ALIGN(4) (NOLOAD) :
 	{
+		__arm7_end__ = .;
 		__bss_start = ABSOLUTE(.);
 		__bss_start__ = ABSOLUTE(.);
 		*(.dynbss)
@@ -171,6 +221,5 @@ SECTIONS
 	.debug_funcnames 0 : { *(.debug_funcnames) }
 	.debug_typenames 0 : { *(.debug_typenames) }
 	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
 	/* These must appear regardless of  .  */
-}
+}

dkarm-eabi/crtls/ds_arm7.specs

@@ -1,7 +1,7 @@
 %rename link                old_link
 
 *link:
-%(old_link) -T ds_arm7.ld%s
+%(old_link) -T ds_arm7.ld%s --gc-sections
 
 *startfile:
 ds_arm7_crt0%O%s crti%O%s crtbegin%O%s

dkarm-eabi/crtls/ds_arm7_crt0.s

@@ -1,5 +1,5 @@
 @---------------------------------------------------------------------------------
-	.section ".init"
+	.section ".crt0","ax"
 	.global _start
 @---------------------------------------------------------------------------------
 	.align	4
@@ -23,11 +23,53 @@ _start:
 	msr	cpsr, r0
 	ldr	sp, =__sp_usr		@ Set user stack
 
+#ifndef VRAM
+	adr	r1, __sync_start	@ Perform ARM7<->ARM9 sync code
+	ldr	r2, =__arm7_start__
+	mov	r3, #(__sync_end-__sync_start)
+	mov	r8, r2
+	bl	CopyMem
+	mov	r3, r8
+	bl	_blx_r3_stub
+
+@---------------------------------------------------------------------------------
+@ Copy arm7 binary from LMA to VMA (EWRAM to IWRAM)
+@---------------------------------------------------------------------------------
+	adr	r0, arm7lma		@ Calculate ARM7 LMA
+	ldr	r1, [r0]
+	add	r1, r1, r0
+	ldr	r2, =__arm7_start__
+	ldr	r4, =__arm7_end__
+	bl	CopyMemCheck
+
+#else
+	bl	__sync_start
+#endif
+
 	ldr	r0, =__bss_start__	@ Clear BSS section to 0x00
 	ldr	r1, =__bss_end__
 	sub	r1, r1, r0
 	bl	ClearMem
 
+#ifndef VRAM
+	cmp	r10, #1
+	bne	NotTWL
+	ldr	r1, =__dsimode		@ set DSi mode flag
+	strb	r10, [r1]
+
+	ldr	r1, =0x02ffe1d8		@ Get ARM7i LMA from header
+	ldr	r1, [r1]
+	ldr	r2, =__arm7i_start__
+	ldr	r4, =__arm7i_end__
+	bl	CopyMemCheck
+
+	ldr	r0, =__twl_bss_start__	@ Clear TWL BSS section to 0x00
+	ldr	r1, =__twl_bss_end__
+	sub	r1, r1, r0
+	bl	ClearMem
+#endif
+
+NotTWL:
 	ldr	r3, =__libc_init_array	@ global constructors
 	bl	_blx_r3_stub
 
@@ -35,14 +77,51 @@ _start:
 	mov	r1, #0			@ char *argv[]
 	ldr	r3, =main
 	ldr	lr,=__libnds_exit
-	bx	r3
+	mov	r12, #0x4000000		@ tell arm9 we are ready
-
+	mov	r9, #0
-
+	str	r9, [r12, #0x180]
-@---------------------------------------------------------------------------------
 _blx_r3_stub:
-@---------------------------------------------------------------------------------
 	bx	r3
 
+#ifndef VRAM
+arm7lma:
+	.word	__arm7_lma__ - .
+#endif
+	.pool
+
+@---------------------------------------------------------------------------------
+@ ARM7<->ARM9 synchronization code
+@---------------------------------------------------------------------------------
+
+__sync_start:
+	push	{lr}
+	mov	r12, #0x4000000
+	mov	r9, #0x0
+	bl	IPCSync
+	mov	r9, #(0x9<<8)
+	str	r9, [r12, #0x180]
+	mov	r9, #0xA
+	bl	IPCSync
+	mov	r9, #(0xB<<8)
+	str	r9, [r12, #0x180]
+	mov	r9, #0xC
+	bl	IPCSync
+	mov	r9, #(0xD<<8)
+	str	r9, [r12, #0x180]
+IPCRecvFlag:
+	ldr	r10, [r12, #0x180]
+	and	r10, r10, #0xF
+	cmp	r10, #0xC
+	beq	IPCRecvFlag
+	pop	{pc}
+IPCSync:
+	ldr	r10, [r12, #0x180]
+	and	r10, r10, #0xF
+	cmp	r10, r9
+	bne	IPCSync
+	bx	lr
+__sync_end:
+
 @---------------------------------------------------------------------------------
 @ Clear memory to 0x00 if length != 0
 @  r0 = Start Address
@@ -70,6 +149,9 @@ ClrLoop:
 @---------------------------------------------------------------------------------
 CopyMemCheck:
 @---------------------------------------------------------------------------------
+	cmp	r1, r2
+	bxeq	lr
+
 	sub	r3, r4, r2		@ Is there any data to copy?
 @---------------------------------------------------------------------------------
 @ Copy memory

dkarm-eabi/crtls/ds_arm7_iwram.ld

@@ -0,0 +1,187 @@
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+
+MEMORY {
+
+	rom	: ORIGIN = 0x08000000, LENGTH = 32M
+	iwram	: ORIGIN = 0x037f8000, LENGTH = 96K	
+}
+
+__iwram_start	=	ORIGIN(iwram);
+__iwram_top	=	ORIGIN(iwram)+ LENGTH(iwram);
+
+__sp_irq	=	__iwram_top - 0x100;
+__sp_svc	=	__sp_irq - 0x100;
+__sp_usr	=	__sp_svc - 0x100;
+
+__irq_flags	=	0x04000000 - 8;
+__irq_flagsaux	=	0x04000000 - 0x40;
+__irq_vector	=	0x04000000 - 4;
+
+SECTIONS
+{
+	.crt0	:
+	{
+		__text_start = . ;
+		KEEP (*(.crt0))
+		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+	} >iwram = 0xff
+
+	.init           :
+	{
+		KEEP (*(SORT_NONE(.init)))
+	} >iwram = 0xff
+
+	.plt : { *(.plt) } >iwram = 0xff
+
+	.text :   /* ALIGN (4): */
+	{
+		*(.text .stub .text.* .gnu.linkonce.t.*)
+		KEEP (*(.text.*personality*))
+		/* .gnu.warning sections are handled specially by elf32.em.  */
+		*(.gnu.warning)
+		*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
+		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+	} >iwram = 0xff
+
+	.fini           :
+	{
+		KEEP (*(.fini))
+	} >iwram =0xff
+
+	__text_end = . ;
+
+	.rodata :
+	{
+		*(.rodata)
+		*all.rodata*(*)
+		*(.roda)
+		*(.rodata.*)
+		*(.gnu.linkonce.r*)
+		SORT(CONSTRUCTORS)
+		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+	} >iwram = 0xff
+
+	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >iwram
+	__exidx_start = .;
+	.ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >iwram
+	__exidx_end = .;
+
+/* Ensure the __preinit_array_start label is properly aligned.  We
+   could instead move the label definition inside the section, but
+   the linker would then create the section even if it turns out to
+   be empty, which isn't pretty.  */
+	. = ALIGN(32 / 8);
+	PROVIDE (__preinit_array_start = .);
+	.preinit_array     : { KEEP (*(.preinit_array)) } >iwram = 0xff
+	PROVIDE (__preinit_array_end = .);
+	PROVIDE (__init_array_start = .);
+	.init_array     : { KEEP (*(.init_array)) } >iwram = 0xff
+	PROVIDE (__init_array_end = .);
+	PROVIDE (__fini_array_start = .);
+	.fini_array     : { KEEP (*(.fini_array)) } >iwram = 0xff
+	PROVIDE (__fini_array_end = .);
+
+	.ctors :
+	{
+	/* gcc uses crtbegin.o to find the start of the constructors, so
+		we make sure it is first.  Because this is a wildcard, it
+		doesn't matter if the user does not actually link against
+		crtbegin.o; the linker won't look for a file to match a
+		wildcard.  The wildcard also means that it doesn't matter which
+		directory crtbegin.o is in.  */
+		KEEP (*crtbegin.o(.ctors))
+		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+		KEEP (*(SORT(.ctors.*)))
+		KEEP (*(.ctors))
+		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+	} >iwram = 0xff
+
+	.dtors :
+	{
+		KEEP (*crtbegin.o(.dtors))
+		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+		KEEP (*(SORT(.dtors.*)))
+		KEEP (*(.dtors))
+		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+	} >iwram = 0xff
+
+	.eh_frame :
+	{
+		KEEP (*(.eh_frame))
+		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+	} >iwram = 0xff
+
+	.gcc_except_table :
+	{
+		*(.gcc_except_table)
+		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+	} >iwram = 0xff
+	.jcr            : { KEEP (*(.jcr)) } >iwram = 0
+	.got            : { *(.got.plt) *(.got) } >iwram = 0
+
+
+	.data ALIGN(4) : 	{
+		__data_start = ABSOLUTE(.);
+		*(.data)
+		*(.data.*)
+		*(.gnu.linkonce.d*)
+		CONSTRUCTORS
+		. = ALIGN(4);
+		__data_end = ABSOLUTE(.) ;
+	} >iwram = 0xff
+
+
+	__arm7_end__ = .;
+
+
+	.bss ALIGN(4) :
+	{
+		__bss_start = ABSOLUTE(.);
+		__bss_start__ = ABSOLUTE(.);
+		*(.dynbss)
+		*(.gnu.linkonce.b*)
+		*(.bss*)
+		*(COMMON)
+		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
+		__bss_end__ = ABSOLUTE(.);
+		__end__ = ABSOLUTE(.);
+	} >iwram
+
+	/* Stabs debugging sections.  */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	/*	DWARF debug sections.
+		Symbols in the DWARF debugging sections are relative to the beginning
+		of the section so we begin them at 0.  */
+	/* DWARF 1 */
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+	/* GNU DWARF 1 extensions */
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+	/* DWARF 1.1 and DWARF 2 */
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	/* DWARF 2 */
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+	/* SGI/MIPS DWARF 2 extensions */
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames  0 : { *(.debug_varnames) }
+	.stack 0x80000 : { _stack = .; *(.stack) }
+	/* These must appear regardless of  .  */
+}

dkarm-eabi/crtls/ds_arm7_iwram.specs

@@ -0,0 +1,8 @@
+%rename link                old_link
+
+*link:
+%(old_link) -T ds_arm7_iwram.ld%s
+
+*startfile:
+ds_arm7_vram_crt0%O%s crti%O%s crtbegin%O%s
+

dkarm-eabi/crtls/ds_arm7_vram.ld

@@ -6,7 +6,7 @@ MEMORY {
 
 	rom	: ORIGIN = 0x08000000, LENGTH = 32M
 	iwram	: ORIGIN = 0x037f8000, LENGTH = 96K	
-	vram	: ORIGIN = 0x06000000, LENGTH = 128K
+	vram	: ORIGIN = 0x06000000, LENGTH = 256K
 }
 
 __iwram_start	=	ORIGIN(iwram);
@@ -22,12 +22,20 @@ __irq_vector	=	0x04000000 - 4;
 
 SECTIONS
 {
-	.init	:
+	.crt0	:
 	{
 		__text_start = . ;
-		KEEP (*(.init))
+		KEEP (*(.crt0))
 		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		} >vram = 0xff
+	} >vram = 0xff
+
+	__arm7_lma__ = .;
+	__arm7_start__ = .;
+	.init           :
+	{
+		KEEP (*(SORT_NONE(.init)))
+	} >vram = 0xff
+
 	.plt : { *(.plt) } >vram = 0xff
 
 	.text :   /* ALIGN (4): */
@@ -128,6 +136,8 @@ SECTIONS
 	} >vram = 0xff
 
 
+	__arm7_end__ = .;
+
 
 	.bss ALIGN(4) :
 	{

dkarm-eabi/crtls/ds_arm7_vram.specs

@@ -4,5 +4,5 @@
 %(old_link) -T ds_arm7_vram.ld%s
 
 *startfile:
-ds_arm7_crt0%O%s crti%O%s crtbegin%O%s
+ds_arm7_vram_crt0%O%s crti%O%s crtbegin%O%s
 

dkarm-eabi/crtls/ds_arm9.ld

@@ -2,11 +2,9 @@ OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
 ENTRY(_start)
 
-__vectors_start	=	ORIGIN(vectors);
-__itcm_start	=	ORIGIN(itcm);
 __ewram_end	=	ORIGIN(ewram) + LENGTH(ewram);
 __eheap_end	=	ORIGIN(ewram) + LENGTH(ewram);
-__dtcm_start	=	ORIGIN(dtcm);
+
 __dtcm_top	=	ORIGIN(dtcm) + LENGTH(dtcm);
 __irq_flags	=	__dtcm_top - 0x08;
 __irq_vector	=	__dtcm_top - 0x04;
@@ -15,52 +13,67 @@ __sp_svc	=	__dtcm_top - 0x100;
 __sp_irq	=	__sp_svc - 0x100;
 __sp_usr	=	__sp_irq - 0x100;
 
+PHDRS {
+	main    PT_LOAD FLAGS(7);
+	dtcm    PT_LOAD FLAGS(7);
+	itcm    PT_LOAD FLAGS(7);
+	vectors PT_LOAD FLAGS(7);
+	twl     PT_LOAD FLAGS(0x100007);
+}
+
 SECTIONS
 {
-	.init	:
+	/* Secure area crap */
+	.secure : { *(.secure) } >ewram :main = 0
+
+	.crt0	:
 	{
 		__text_start = . ;
-		KEEP (*(.init))
+		KEEP (*(.crt0))
 		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
+	} >ewram :main = 0x00
 
-	.plt : { *(.plt) } >ewram = 0xff
+	.plt : { *(.plt) } >ewram :main = 0xff
+
+	.init :
+	{
+		KEEP (*(SORT_NONE(.init)))
+	} >ewram :main
 
 	.text :   /* ALIGN (4): */
 	{
-		*(EXCLUDE_FILE (*.itcm*) .text)
+		*(EXCLUDE_FILE(*.itcm* *.vectors* *.twl*) .text)
-
+		*(EXCLUDE_FILE(*.itcm* *.vectors* *.twl*) .stub)
-		*(.text.*)
+		*(EXCLUDE_FILE(*.itcm* *.vectors* *.twl*) .text.*)
-		*(.stub)
 		/* .gnu.warning sections are handled specially by elf32.em.  */
-		*(.gnu.warning)
+		*(EXCLUDE_FILE(*.twl*) .gnu.warning)
-		*(.gnu.linkonce.t*)
+		*(EXCLUDE_FILE(*.twl*) .gnu.linkonce.t*)
 		*(.glue_7)
 		*(.glue_7t)
 		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 
 	.fini           :
 	{
 		KEEP (*(.fini))
-	} >ewram =0xff
+	} >ewram :main =0xff
 
 	__text_end = . ;
 
 	.rodata :
 	{
-		*(.rodata)
+		*(EXCLUDE_FILE(*.twl*) .rodata)
 		*all.rodata*(*)
-		*(.roda)
+		*(EXCLUDE_FILE(*.twl*) .roda)
-		*(.rodata.*)
+		*(EXCLUDE_FILE(*.twl*) .rodata.*)
-		*(.gnu.linkonce.r*)
+		*(EXCLUDE_FILE(*.twl*) .gnu.linkonce.r*)
 		SORT(CONSTRUCTORS)
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 
-	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ewram
+	.ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >ewram :main
  	__exidx_start = .;
-	ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ewram
+	ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } >ewram :main
  	__exidx_end = .;
 
 	/*	Ensure the __preinit_array_start label is properly aligned.  We
@@ -71,21 +84,21 @@ SECTIONS
 	. = ALIGN(32 / 8);
 
 	PROVIDE (__preinit_array_start = .);
-	.preinit_array     : { KEEP (*(.preinit_array)) } >ewram = 0xff
+	.preinit_array     : { KEEP (*(.preinit_array)) } >ewram :main = 0xff
 	PROVIDE (__preinit_array_end = .);
 	PROVIDE (__init_array_start = .);
 	.init_array     :
 	{
 		KEEP (*(SORT(.init_array.*)))
 		KEEP (*(.init_array))
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 	PROVIDE (__init_array_end = .);
 	PROVIDE (__fini_array_start = .);
 	.fini_array     :
 	{
 		KEEP (*(.fini_array))
 		KEEP (*(SORT(.fini_array.*)))
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 
 	PROVIDE (__fini_array_end = .);
 
@@ -102,7 +115,7 @@ SECTIONS
 		KEEP (*(SORT(.ctors.*)))
 		KEEP (*(.ctors))
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 
 	.dtors :
 	{
@@ -111,21 +124,21 @@ SECTIONS
 		KEEP (*(SORT(.dtors.*)))
 		KEEP (*(.dtors))
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 
 	.eh_frame :
 	{
 		KEEP (*(.eh_frame))
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 
 	.gcc_except_table :
 	{
 		*(.gcc_except_table)
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
+	} >ewram :main = 0xff
-	.jcr            : { KEEP (*(.jcr)) } >ewram = 0
+	.jcr            : { KEEP (*(.jcr)) } >ewram :main = 0
-	.got            : { *(.got.plt) *(.got) *(.rel.got) } >ewram = 0
+	.got            : { *(.got.plt) *(.got) *(.rel.got) } >ewram :main = 0
 
 	.ewram ALIGN(4) : 
 	{
@@ -133,52 +146,51 @@ SECTIONS
 		*(.ewram)
 		*ewram.*(.text)
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 
 
 	.data ALIGN(4) :
 	{
 		__data_start = ABSOLUTE(.);
-		*(.data)
+		*(EXCLUDE_FILE(*.twl*) .data)
-		*(.data.*)
+		*(EXCLUDE_FILE(*.twl*) .data.*)
-		*(.gnu.linkonce.d*)
+		*(EXCLUDE_FILE(*.twl*) .gnu.linkonce.d*)
 		CONSTRUCTORS
 		. = ALIGN(4);
 		__data_end = ABSOLUTE(.) ;
-	} >ewram = 0xff
+	} >ewram :main = 0xff
 
-
-	__dtcm_lma = . ;
 	__bss_vma = . ;
 
-	.dtcm __dtcm_start : AT (__dtcm_lma)
+	.dtcm :
 	{
+		__dtcm_lma = LOADADDR(.dtcm);
+		__dtcm_start = ABSOLUTE(.);
 		*(.dtcm)
 		*(.dtcm.*)
 		. = ALIGN(4);
 		__dtcm_end = ABSOLUTE(.);
-	} >dtcm  = 0xff
+	} >dtcm AT>ewram :dtcm = 0xff
 
-
+	.itcm :
-	__itcm_lma = __dtcm_lma + SIZEOF(.dtcm);
-
-	.itcm __itcm_start : AT (__itcm_lma)
 	{
+		__itcm_lma = LOADADDR(.itcm);
+		__itcm_start = ABSOLUTE(.);
 		*(.itcm)
-		*itcm.*(.text)
+		*.itcm*(.text .stub .text.*)
 		. = ALIGN(4);
 		__itcm_end = ABSOLUTE(.);
-	} >itcm = 0xff
+	} >itcm AT>ewram :itcm = 0xff
-	
-	__vectors_lma = __itcm_lma + SIZEOF(.itcm);
 
-	.vectors __vectors_start : AT (__vectors_lma)
+	.vectors :
 	{
+		__vectors_lma = LOADADDR(.vectors);
+		__vectors_start = ABSOLUTE(.);
 		*(.vectors)
-		*vectors.*(.text)
+		*.vectors*(.text .stub .text.*)
 		. = ALIGN(4);
 		__vectors_end = ABSOLUTE(.);
-	} >vectors = 0xff
+	} >vectors AT>ewram :vectors = 0xff
 	
 	.sbss __dtcm_end (NOLOAD): 
 	{
@@ -187,22 +199,48 @@ SECTIONS
 		*(.sbss)
 		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
 		__sbss_end = ABSOLUTE(.);
-	} >dtcm 
+	} >dtcm :NONE
 
 	.bss __bss_vma (NOLOAD): 
 	{
 		__bss_start = ABSOLUTE(.);
 		__bss_start__ = ABSOLUTE(.);
-		*(.dynbss)
+		*(EXCLUDE_FILE(*.twl*) .dynbss)
-		*(.gnu.linkonce.b*)
+		*(EXCLUDE_FILE(*.twl*) .gnu.linkonce.b*)
-		*(.bss*)
+		*(EXCLUDE_FILE(*.twl*) .bss*)
-		*(COMMON)
+		*(EXCLUDE_FILE(*.twl*) COMMON)
 		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
 		__bss_end__ = ABSOLUTE(.) ;
 		__end__ = ABSOLUTE(.) ;
-	} AT>ewram 
+	} >ewram :NONE
 
+	.twl __end__ : AT(MAX(0x2400000,MAX(__end__,LOADADDR(.vectors)+SIZEOF(.vectors))))
+	{
+		__arm9i_lma__ = LOADADDR(.twl);
+		__arm9i_start__ = ABSOLUTE(.);
+		*(.twl)
+		*.twl*(.text .stub .text.* .gnu.linkonce.t.*)
+		*.twl*(.rodata)
+		*.twl*(.roda)
+		*.twl*(.rodata.*)
+		*.twl*(.data)
+		*.twl*(.data.*)
+		*.twl*(.gnu.linkonce.d*)
+		__arm9i_end__ = ABSOLUTE(.);
+	} :twl
 
+	.twl_bss __arm9i_end__ (NOLOAD):
+	{
+		__twl_bss_start__ = ABSOLUTE(.);
+		*(.twl_bss)
+		*.twl*(.dynbss)
+		*.twl*(.gnu.linkonce.b*)
+		*.twl*(.bss*)
+		*.twl*(COMMON)
+		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
+		__twl_bss_end__ = ABSOLUTE(.);
+		__twl_end__ = ABSOLUTE(.);
+	} :NONE
 
 	/* Stabs debugging sections.  */
 	.stab 0 : { *(.stab) }

dkarm-eabi/crtls/ds_arm9.mem

@@ -1,7 +1,5 @@
 MEMORY {
-
+	ewram	: ORIGIN = 0x02000000, LENGTH = 4M - 512k
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	ewram	: ORIGIN = 0x02000000, LENGTH = 4M - 4k
 	dtcm	: ORIGIN = 0x0b000000, LENGTH = 16K
 	vectors	: ORIGIN = 0x01000000, LENGTH = 256
 	itcm	: ORIGIN = 0x01000100, LENGTH = 32K - 256

dkarm-eabi/crtls/ds_arm9.specs

@@ -1,7 +1,7 @@
 %rename link                old_link
 
 *link:
-%(old_link) -T ds_arm9.mem%s -T ds_arm9.ld%s
+%(old_link) -T ds_arm9.mem%s -T ds_arm9.ld%s --gc-sections
 
 *startfile:
 ds_arm9_crt0%O%s crti%O%s crtbegin%O%s

dkarm-eabi/crtls/ds_arm9_crt0.s

@@ -8,7 +8,7 @@
 	.equ	_libnds_argv,0x02FFFE70
 
 @---------------------------------------------------------------------------------
-	.section ".init"
+	.section ".crt0","ax"
 	.global _start
 @---------------------------------------------------------------------------------
 	.align	4
@@ -16,7 +16,7 @@
 @---------------------------------------------------------------------------------
 _start:
 @---------------------------------------------------------------------------------
-	mov	r0, #0x04000000			@ IME = 0;
+	mov	r0, #0x04000000		@ IME = 0;
 	str	r0, [r0, #0x208]
 	
 	@ set sensible stacks to allow bios call
@@ -46,12 +46,34 @@ _start:
 	msr	cpsr, r0
 	ldr	sp, =__sp_usr		@ Set user stack
 
+	mov	r12, #0x4000000		@ Read system ROM status (NTR/TWL)
+	ldrb	r11, [r12,r12,lsr #12]
+	and	r11, r11, #0x3
+
+	mov	r9, #(0x0<<8)		@ Synchronize with ARM7
+	str	r9, [r12, #0x180]
+	mov	r9, #0x9
+	bl	IPCSync
+	mov	r9, #(0xA<<8)
+	str	r9, [r12, #0x180]
+	mov	r9, #0xB
+	bl	IPCSync
+	mov	r9, #(0xC<<8)
+	str	r9, [r12, #0x180]
+	mov	r9, #0xD
+	bl	IPCSync
+	mov	r9, r11, lsl #8
+	str	r9, [r12, #0x180]
+	mov	r9, #0
+	bl	IPCSync
+	str	r9, [r12, #0x180]
+
 	ldr	r1, =__itcm_lma		@ Copy instruction tightly coupled memory (itcm section) from LMA to VMA
 	ldr	r2, =__itcm_start
 	ldr	r4, =__itcm_end
 	bl	CopyMemCheck
 
-	ldr	r1, =__vectors_lma		@ Copy reserved vectors area (itcm section) from LMA to VMA
+	ldr	r1, =__vectors_lma	@ Copy reserved vectors area (itcm section) from LMA to VMA
 	ldr	r2, =__vectors_start
 	ldr	r4, =__vectors_end
 	bl	CopyMemCheck
@@ -61,6 +83,9 @@ _start:
 	ldr	r4, =__dtcm_end
 	bl	CopyMemCheck
 
+	cmp	r11, #1
+	ldrne	r10, =__end__		@ (DS mode) heap start
+	ldreq	r10, =__twl_end__	@ (DSi mode) heap start
 	bl	checkARGV		@ check and process argv trickery
 
 	ldr	r0, =__bss_start__	@ Clear BSS section
@@ -72,20 +97,42 @@ _start:
 	ldr	r1, =__sbss_end
 	sub	r1, r1, r0
 	bl	ClearMem
-	
 
+	cmp	r11, #1
+	bne	NotTWL
+	ldr	r9, =__dsimode		@ set DSi mode flag
+	strb	r11, [r9]
+
+	@ Copy TWL area (arm9i section) from LMA to VMA
+	ldr	r1, =0x02ffe1c8		@ Get ARM9i LMA from header
+	ldr	r1, [r1]
+
+	ldr	r2, =__arm9i_start__
+	cmp	r1, r2			@ skip copy if LMA=VMA
+	ldrne	r4, =__arm9i_end__
+	blne	CopyMemCheck
+
+	ldr	r0, =__twl_bss_start__	@ Clear TWL BSS section
+	ldr	r1, =__twl_bss_end__
+	sub	r1, r1, r0
+	bl	ClearMem
+
+NotTWL:
 	ldr	r0, =_libnds_argv
 
 	@ reset heap base
 	ldr	r2, [r0,#20]		@ newheap base
-	ldr	r1,=fake_heap_start
+	cmp	r2, #0
-	str	r2,[r1]
+	moveq	r2, r10
+	ldr	r1, =fake_heap_start	@ set heap start
+	str	r2, [r1]
 
 	ldr	r1, =fake_heap_end	@ set heap end
 	sub	r8, r8,#0xc000
 	str	r8, [r1]
 
 	push	{r0}
+	ldr	r0, =__secure_area__
 	ldr	r3, =initSystem
 	blx	r3			@ system initialisation
 
@@ -121,7 +168,7 @@ checkARGV:
 	ldr	r2, [r0, #8]		@ length of command line
 
 	@ copy to heap
-	ldr	r3, =__end__		@ initial heap base
+	mov	r3, r10			@ initial heap base
 	str	r3, [r0, #4]		@ set command line address
 
 	cmp	r2, #0
@@ -161,7 +208,7 @@ ClearMem:
 @---------------------------------------------------------------------------------
 	mov	r2, #3			@ Round down to nearest word boundary
 	add	r1, r1, r2		@ Shouldn't be needed
-	bics	r1, r1, r2	@ Clear 2 LSB (and set Z)
+	bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
 	bxeq	lr			@ Quit if copy size is 0
 
 	mov	r2, #0
@@ -191,7 +238,7 @@ CopyMem:
 @---------------------------------------------------------------------------------
 	mov	r0, #3			@ These commands are used in cases where
 	add	r3, r3, r0		@ the length is not a multiple of 4,
-	bics	r3, r3, r0	@ even though it should be.
+	bics	r3, r3, r0		@ even though it should be.
 	bxeq	lr			@ Length is zero, so exit
 CIDLoop:
 	ldmia	r1!, {r0}
@@ -201,6 +248,17 @@ CIDLoop:
 
 	bx	lr
 
+@---------------------------------------------------------------------------------
+@ Synchronize with ARM7
+@---------------------------------------------------------------------------------
+IPCSync:
+@---------------------------------------------------------------------------------
+	ldr	r10, [r12, #0x180]
+	and	r10, r10, #0xF
+	cmp	r10, r9
+	bne	IPCSync
+	bx	lr
+
 @---------------------------------------------------------------------------------
 	.align
 	.pool

dkarm-eabi/crtls/ds_cart.ld

@@ -22,14 +22,25 @@ __irq_vector	=	__iwram_top - 4;
 
 SECTIONS
 {
-	.init	:
+	.crt0	:
 	{
 		__text_start = . ;
-		KEEP (*(.init))
+		KEEP (*(.crt0))
 		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-		} >rom = 0xff
+	} >rom = 0xff
+
+	.init           :
+	{
+		KEEP (*(SORT_NONE(.init)))
+	} >rom = 0xff
+
 	.plt : { *(.plt) } >rom = 0xff
 
+	.init :
+	{
+		KEEP (*(SORT_NONE(.init)))
+	} >ewram
+
 	.text :   /* ALIGN (4): */
 	{
 		*(EXCLUDE_FILE (*.iwram*) .text)

dkarm-eabi/crtls/ds_cart.specs

@@ -1,7 +1,7 @@
 %rename link                old_link
 
 *link:
-%(old_link) -T ds_cart.ld%s
+%(old_link) -T ds_cart.ld%s --gc-sections
 
 *startfile:
 ds_cart_crt0%O%s crti%O%s crtbegin%O%s

dkarm-eabi/crtls/ds_cart_crt0.s

@@ -1,5 +1,5 @@
 @---------------------------------------------------------------------------------
-	.section ".init"
+	.section ".crt0","ax"
 	.global _start
 	.arm
 @---------------------------------------------------------------------------------

dkarm-eabi/crtls/dsi_arm9.mem

@@ -1,7 +1,5 @@
 MEMORY {
-
+	ewram	: ORIGIN = 0x02000000, LENGTH = 15M - 512k
-	rom	: ORIGIN = 0x08000000, LENGTH = 32M
-	ewram	: ORIGIN = 0x02000000, LENGTH = 16M - 4k
 	dtcm	: ORIGIN = 0x0b000000, LENGTH = 16K
 	vectors	: ORIGIN = 0x01000000, LENGTH = 256
 	itcm	: ORIGIN = 0x01000100, LENGTH = 32K - 256

dkarm-eabi/crtls/dsi_arm9.specs

@@ -1,7 +1,7 @@
 %rename link                old_link
 
 *link:
-%(old_link) -T dsi_arm9.mem%s -T ds_arm9.ld%s
+%(old_link) -T dsi_arm9.mem%s -T ds_arm9.ld%s --gc-sections
 
 *startfile:
 ds_arm9_crt0%O%s crti%O%s crtbegin%O%s

dkarm-eabi/crtls/er_crt0.s

@@ -4,7 +4,7 @@
 @ author  : tim schuerewegen
 @ version : 1.0
 @---------------------------------------------------------------------------------
-	.section	".init"
+	.section	".crt0","ax"
 	.global     _start
 	.align
 	.arm

dkarm-eabi/crtls/gba.specs

@@ -1,7 +1,7 @@
 %rename link                old_link
 
 *link:
-%(old_link) -T gba_cart.ld%s
+%(old_link) -T gba_cart.ld%s --gc-sections
 
 *startfile:
 gba_crt0%O%s crti%O%s crtbegin%O%s

dkarm-eabi/crtls/gba_cart.ld

@@ -67,12 +67,18 @@ __irq_flags	=	0x03007ff8;
 SECTIONS
 {
 	. = __text_start;
-	.init :
+	.crt0 :
 	{
-		KEEP (*(.init))
+		KEEP (*(.crt0))
 		. = ALIGN(4);
 	} >rom =0xff
 
+
+	.init :
+	{
+		KEEP (*(SORT_NONE(.init)))
+	} >rom
+
 	.plt :
 	{
 		*(.plt)

dkarm-eabi/crtls/gba_crt0.s

@@ -1,7 +1,10 @@
-	.section	".init"
+	.section	".crt0","ax"
 	.global     _start
 	.align
+
 	.arm
+	.cpu arm7tdmi
+
 @---------------------------------------------------------------------------------
 _start:
 @---------------------------------------------------------------------------------
@@ -43,8 +46,8 @@ __slave_number:
 	.word   0    				@ reserved
 	.word   0    				@ reserved
 
-    .global     start_vector
+	.global     start_vector
-    .align
+	.align
 @---------------------------------------------------------------------------------
 start_vector:
 @---------------------------------------------------------------------------------

dkarm-eabi/crtls/gba_er.ld

@@ -13,9 +13,9 @@ SECTIONS
 {
 	.  = 0x02000000;
 
-	.init :
+	.crt0 :
 	{
-		*(.init)
+		*(.crt0)
 		. = ALIGN(4);
 	} = 0xff
 

dkarm-eabi/crtls/gba_er.specs

@@ -2,7 +2,7 @@
 %rename endfile		old_endfile
 
 *link:
--T gba_er.ld%s %(old_link)
+-T gba_er.ld%s %(old_link) --gc-sections
 
 *startfile:
 er_crt0%O%s

dkarm-eabi/crtls/gba_mb.ld

@@ -61,18 +61,25 @@ __irq_flags	=	0x03007ff8;
 SECTIONS
 {
 	. = __text_start;
-	.init :
+	. = __text_start;
+	.crt0 :
 	{
-		KEEP (*(.init))
+		KEEP (*(.crt0))
 		. = ALIGN(4);
 	} >ewram =0xff
 
+	.init :
+	{
+		KEEP (*(SORT_NONE(.init)))
+	} >ewram
+
 	.plt :
- 	{
+	{
 		*(.plt)
 		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
 	} >ewram
 
+
 	.text  ALIGN (4):
 	{
 		*(EXCLUDE_FILE (*.iwram*) .text)

dkarm-eabi/crtls/gba_mb.specs

@@ -1,7 +1,7 @@
 %rename link                old_link
 
 *link:
--T gba_mb.ld%s %(old_link)
+-T gba_mb.ld%s %(old_link) --gc-sections
 
 *startfile:
 gba_crt0%O%s crti%O%s crtbegin%O%s

dkarm-eabi/crtls/gp32.ld

@@ -9,12 +9,18 @@ MEMORY
 
 SECTIONS
 {
-  .init           :
+  .crt0           :
   {
     __text_start = . ;
-    KEEP (*(.init))
+    KEEP (*(.crt0))
     . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
   } >ram = 0xff
+
+  .init :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >ram
+
   .plt            : { *(.plt) } >ram = 0xff
 
  

dkarm-eabi/crtls/gp32.specs

@@ -1,7 +1,7 @@
 %rename link                old_link
 
 *link:
-%(old_link) -T gp32.ld%s
+%(old_link) -T gp32.ld%s --gc-sections
 
 *startfile:
 gp32_crt0%O%s crti%O%s crtbegin%O%s

dkarm-eabi/crtls/gp32_crt0.s

@@ -1,4 +1,4 @@
-    .section	".init"
+    .section	".crt0","ax"
 	.code 32
 	.align
 	.global _start

dkarm-eabi/crtls/gp32_gpsdk.specs

@@ -1,7 +1,7 @@
 %rename link                old_link
 
 *link:
-%(old_link) -T gp32_gpsdk.ld%s
+%(old_link) -T gp32_gpsdk.ld%s --gc-sections
 
 *startfile:
 gp32_gpsdk_crt0%O%s crti%O%s crtbegin%O%s

dkarm-eabi/patches/binutils-2.22.patch

@@ -1,162 +0,0 @@
-diff -Nbaur binutils-2.22/bfd/bfd-in2.h binutils-2.22-arm/bfd/bfd-in2.h
---- binutils-2.22/bfd/bfd-in2.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-arm/bfd/bfd-in2.h	2012-04-01 12:58:20.000000000 +0100
-@@ -38,6 +38,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -308,8 +310,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/bfd-in.h binutils-2.22-arm/bfd/bfd-in.h
---- binutils-2.22/bfd/bfd-in.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-arm/bfd/bfd-in.h	2012-04-01 12:58:20.000000000 +0100
-@@ -31,6 +31,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -301,8 +303,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/config.in binutils-2.22-arm/bfd/config.in
---- binutils-2.22/bfd/config.in	2011-05-12 08:41:40.000000000 +0100
-+++ binutils-2.22-arm/bfd/config.in	2012-04-03 17:35:45.000000000 +0100
-@@ -245,6 +245,9 @@
- /* Define if <sys/procfs.h> has win32_pstatus_t. */
- #undef HAVE_WIN32_PSTATUS_T
- 
-+/* Define to 1 if you have the <windows.h> header file. */
-+#undef HAVE_WINDOWS_H
-+
- /* Define to 1 if you have the <zlib.h> header file. */
- #undef HAVE_ZLIB_H
- 
-diff -Nbaur binutils-2.22/bfd/configure binutils-2.22-arm/bfd/configure
---- binutils-2.22/bfd/configure	2011-11-21 11:55:48.000000000 +0000
-+++ binutils-2.22-arm/bfd/configure	2012-04-03 17:35:45.000000000 +0100
-@@ -13508,6 +13508,22 @@
- 
- fi
- 
-+
-+for ac_header in windows.h dlfcn.h
-+do :
-+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-+eval as_val=\$$as_ac_Header
-+   if test "x$as_val" = x""yes; then :
-+  cat >>confdefs.h <<_ACEOF
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
- $as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
- if test "${gcc_cv_header_string+set}" = set; then :
-diff -Nbaur binutils-2.22/bfd/configure.in binutils-2.22-arm/bfd/configure.in
---- binutils-2.22/bfd/configure.in	2011-11-21 11:55:46.000000000 +0000
-+++ binutils-2.22-arm/bfd/configure.in	2012-04-03 17:35:45.000000000 +0100
-@@ -190,6 +190,9 @@
- GCC_HEADER_STDINT(bfd_stdint.h)
- AC_HEADER_TIME
- AC_HEADER_DIRENT
-+
-+AC_CHECK_HEADERS(windows.h dlfcn.h)
-+
- ACX_HEADER_STRING
- AC_CHECK_FUNCS(fcntl getpagesize setitimer sysconf fdopen getuid getgid fileno)
- AC_CHECK_FUNCS(strtoull)
-diff -Nbaur binutils-2.22/bfd/plugin.c binutils-2.22-arm/bfd/plugin.c
---- binutils-2.22/bfd/plugin.c	2011-07-11 16:03:07.000000000 +0100
-+++ binutils-2.22-arm/bfd/plugin.c	2012-04-03 17:35:45.000000000 +0100
-@@ -25,7 +25,13 @@
- #if BFD_SUPPORTS_PLUGINS
- 
- #include <assert.h>
-+#ifdef HAVE_DLFCN_H
- #include <dlfcn.h>
-+#elif defined (HAVE_WINDOWS_H)
-+#include <windows.h>
-+#else
-+#error Unknown how to handle dynamic-load-libraries.
-+#endif
- #include <stdarg.h>
- #include "plugin-api.h"
- #include "sysdep.h"
-@@ -34,6 +40,37 @@
- #include "libiberty.h"
- #include <dirent.h>
- 
-+#if !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)
-+
-+#define RTLD_NOW 0      /* Dummy value.  */
-+
-+static void *
-+dlopen (const char *file, int mode ATTRIBUTE_UNUSED)
-+{
-+  return LoadLibrary (file);
-+}
-+
-+static void *
-+dlsym (void *handle, const char *name)
-+{
-+  return GetProcAddress (handle, name);
-+}
-+
-+static int ATTRIBUTE_UNUSED
-+dlclose (void *handle)
-+{
-+  FreeLibrary (handle);
-+  return 0;
-+}
-+
-+static const char *
-+dlerror (void)
-+{
-+  return "Unable to load DLL.";
-+}
-+
-+#endif /* !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)  */
-+
- #define bfd_plugin_close_and_cleanup                  _bfd_generic_close_and_cleanup
- #define bfd_plugin_bfd_free_cached_info               _bfd_generic_bfd_free_cached_info
- #define bfd_plugin_new_section_hook                   _bfd_generic_new_section_hook
-diff -Nbaur binutils-2.22/include/opcode/arm.h binutils-2.22-arm/include/opcode/arm.h
---- binutils-2.22/include/opcode/arm.h	2011-05-31 15:12:55.000000000 +0100
-+++ binutils-2.22-arm/include/opcode/arm.h	2012-04-01 12:58:20.000000000 +0100
-@@ -109,7 +109,8 @@
- #define ARM_AEXT_V6KT2  (ARM_AEXT_V6T2 | ARM_EXT_V6K)
- #define ARM_AEXT_V6ZT2  (ARM_AEXT_V6T2 | ARM_EXT_SEC)
- #define ARM_AEXT_V6ZKT2 (ARM_AEXT_V6T2 | ARM_EXT_V6K | ARM_EXT_SEC)
--#define ARM_AEXT_V7_ARM	(ARM_AEXT_V6KT2 | ARM_EXT_V7 | ARM_EXT_BARRIER)
-+#define ARM_AEXT_V7_ARM	(ARM_AEXT_V6KT2 | ARM_EXT_V7 | ARM_EXT_BARRIER \
-+    | ARM_EXT_OS )
- #define ARM_AEXT_V7A	(ARM_AEXT_V7_ARM | ARM_EXT_V7A)
- #define ARM_AEXT_V7R	(ARM_AEXT_V7_ARM | ARM_EXT_V7R | ARM_EXT_DIV)
- #define ARM_AEXT_NOTM \

dkarm-eabi/patches/gcc-4.7.0.patch

@@ -1,167 +0,0 @@
-diff -Nbaur gcc-4.7.0/gcc/config/arm/t-arm-elf gcc-4.7.0-arm/gcc/config/arm/t-arm-elf
---- gcc-4.7.0/gcc/config/arm/t-arm-elf	2011-11-02 15:23:48.000000000 +0000
-+++ gcc-4.7.0-arm/gcc/config/arm/t-arm-elf	2012-04-05 20:36:17.000000000 +0100
-@@ -26,22 +26,44 @@
- #MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
- #MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
- 
--#MULTILIB_OPTIONS      += march=armv7
--#MULTILIB_DIRNAMES     += thumb2
--#MULTILIB_EXCEPTIONS   += march=armv7* marm/*march=armv7*
--#MULTILIB_MATCHES      += march?armv7=march?armv7-a
--#MULTILIB_MATCHES      += march?armv7=march?armv7-r
--#MULTILIB_MATCHES      += march?armv7=march?armv7-m
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-a8
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-r4
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-m3
-+#mfloat-abi=hard|mfpu=fpv4-sp-d16
-+
-+MULTILIB_OPTIONS      += march=armv7/march=armv6-m/mcpu=cortex-m4
-+MULTILIB_DIRNAMES     += thumb2 armv6-m cortex-m4
-+MULTILIB_EXCEPTIONS   += march=armv7* marm/*march=armv7*
-+MULTILIB_EXCEPTIONS   += march=armv6-m* marm/*march=armv6-m*
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* marm/*mcpu=cortex-m4*
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* mthumb/mcpu=cortex-m4
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* mthumb/mcpu=cortex-m4/mbig-endian
-+MULTILIB_MATCHES      += march?armv7=march?armv7-a
-+MULTILIB_MATCHES      += march?armv7=march?armv7-r
-+MULTILIB_MATCHES      += march?armv7=march?armv7-m
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-a8
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-r4
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-m3
-+MULTILIB_MATCHES      += march?armv6-m=mcpu?cortex-m0
-+MULTILIB_MATCHES      += march?armv6-m=mcpu?cortex-m1
-+
-+MULTILIB_OPTIONS      += mfloat-abi=hard mfpu=fpv4-sp-d16
-+MULTILIB_DIRNAMES     += float-abi-hard fpuv4-sp-d16
-+MULTILIB_EXCEPTIONS   += mfloat* marm/mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb*march=armv6-m*mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb*march=armv7*mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mcpu=cortex-m4/mfloat-abi=hard
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mcpu=cortex-m4/mfloat-abi=hard/mbig-endian
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb*march=armv6-m*mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb*march=armv7*mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb/mcpu=cortex-m4/mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb/mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* marm/mfpu*
- 
- # Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
- # express that here?  Also, we really need architecture v5e or later
- # (mcrr etc).
--MULTILIB_OPTIONS       += mfloat-abi=hard
--MULTILIB_DIRNAMES      += fpu
--MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
-+#MULTILIB_OPTIONS       += mfloat-abi=hard
-+#MULTILIB_DIRNAMES      += fpu
-+#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
- 
-@@ -49,9 +71,9 @@
- # MULTILIB_DIRNAMES   += ep9312
- # MULTILIB_EXCEPTIONS += *mthumb/*mcpu=ep9312*
- # 	
--# MULTILIB_OPTIONS     += mlittle-endian/mbig-endian
--# MULTILIB_DIRNAMES    += le be
--# MULTILIB_MATCHES     += mbig-endian=mbe mlittle-endian=mle
-+MULTILIB_OPTIONS     += mlittle-endian/mbig-endian
-+MULTILIB_DIRNAMES    += le be
-+MULTILIB_MATCHES     += mbig-endian=mbe mlittle-endian=mle
- # 
- # MULTILIB_OPTIONS    += mfloat-abi=hard/mfloat-abi=soft
- # MULTILIB_DIRNAMES   += fpu soft
-diff -Nbaur gcc-4.7.0/gcc/config/arm/unknown-elf.h gcc-4.7.0-arm/gcc/config/arm/unknown-elf.h
---- gcc-4.7.0/gcc/config/arm/unknown-elf.h	2011-03-31 13:13:13.000000000 +0100
-+++ gcc-4.7.0-arm/gcc/config/arm/unknown-elf.h	2012-04-05 20:36:17.000000000 +0100
-@@ -94,4 +94,4 @@
-    udivmoddi4, which will depend on the exception unwind routines,
-    which will depend on abort, which is defined in libc.  */ 
- #undef LINK_GCC_C_SEQUENCE_SPEC
--#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
-+#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
-diff -Nbaur gcc-4.7.0/gcc/gcc.c gcc-4.7.0-arm/gcc/gcc.c
---- gcc-4.7.0/gcc/gcc.c	2012-02-28 17:31:38.000000000 +0000
-+++ gcc-4.7.0-arm/gcc/gcc.c	2012-04-05 20:36:17.000000000 +0100
-@@ -548,6 +548,11 @@
- #endif
- #endif
- 
-+#ifndef LIBGLOSS_SPEC
-+# define LIBGLOSS_SPEC "-lsysbase"
-+#endif
-+
-+
- /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
- #ifndef STARTFILE_SPEC
- #define STARTFILE_SPEC  \
-@@ -717,6 +722,7 @@
- static const char *mflib_spec = MFLIB_SPEC;
- static const char *link_gomp_spec = "";
- static const char *libgcc_spec = LIBGCC_SPEC;
-+static const char *libgloss_spec = LIBGLOSS_SPEC;
- static const char *endfile_spec = ENDFILE_SPEC;
- static const char *startfile_spec = STARTFILE_SPEC;
- static const char *linker_name_spec = LINKER_NAME;
-@@ -1201,6 +1207,7 @@
-   INIT_STATIC_SPEC ("mflib",			&mflib_spec),
-   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
-   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
-+  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
-   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
-   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
-   INIT_STATIC_SPEC ("version",			&compiler_version),
-diff -Nbaur gcc-4.7.0/libcpp/Makefile.in gcc-4.7.0-arm/libcpp/Makefile.in
---- gcc-4.7.0/libcpp/Makefile.in	2012-03-22 07:37:39.000000000 +0000
-+++ gcc-4.7.0-arm/libcpp/Makefile.in	2012-04-05 20:36:17.000000000 +0100
-@@ -214,8 +214,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -Nbaur gcc-4.7.0/libgcc/crtstuff.c gcc-4.7.0-arm/libgcc/crtstuff.c
---- gcc-4.7.0/libgcc/crtstuff.c	2011-12-06 21:35:41.000000000 +0000
-+++ gcc-4.7.0-arm/libgcc/crtstuff.c	2012-04-05 20:36:50.000000000 +0100
-@@ -49,7 +49,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
--
-+#define USED_FOR_TARGET
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
-diff -Nbaur gcc-4.7.0/libgcc/Makefile.in gcc-4.7.0-arm/libgcc/Makefile.in
---- gcc-4.7.0/libgcc/Makefile.in	2011-11-22 03:01:02.000000000 +0000
-+++ gcc-4.7.0-arm/libgcc/Makefile.in	2012-04-05 20:36:17.000000000 +0100
-@@ -500,14 +500,14 @@
- lib2-divmod-o = $(patsubst %,%$(objext),$(LIB2_DIVMOD_FUNCS))
- $(lib2-divmod-o): %$(objext): $(srcdir)/libgcc2.c
- 	$(gcc_compile) -DL$* -c $< \
--	  -fexceptions -fnon-call-exceptions $(vis_hide)
-+	  -fno-exceptions -fnon-call-exceptions $(vis_hide)
- libgcc-objects += $(lib2-divmod-o)
- 
- ifeq ($(enable_shared),yes)
- lib2-divmod-s-o = $(patsubst %,%_s$(objext),$(LIB2_DIVMOD_FUNCS))
- $(lib2-divmod-s-o): %_s$(objext): $(srcdir)/libgcc2.c
- 	$(gcc_s_compile) -DL$* -c $< \
--	  -fexceptions -fnon-call-exceptions
-+	  -fno-exceptions -fnon-call-exceptions
- libgcc-s-objects += $(lib2-divmod-s-o)
- endif
- 
-@@ -810,7 +810,7 @@
- # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
- # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
- 
--c_flags := -fexceptions
-+c_flags := -fno-exceptions
- 
- ifeq ($(enable_shared),yes)
- 

dkarm-eabi/patches/gcc-6.3.0.patch

@@ -0,0 +1,120 @@
+diff -NBaur gcc-6.2.0/gcc/config/arm/t-arm-elf gcc-6.2.0-arm/gcc/config/arm/t-arm-elf
+--- gcc-6.2.0/gcc/config/arm/t-arm-elf	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.2.0-arm/gcc/config/arm/t-arm-elf	2016-12-10 12:16:20.076000000 +0000
+@@ -16,11 +16,19 @@
+ # along with GCC; see the file COPYING3.  If not see
+ # <http://www.gnu.org/licenses/>.
+ 
+-MULTILIB_OPTIONS     = marm/mthumb
+-MULTILIB_DIRNAMES    = arm thumb
++MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k mfloat-abi=hard
++MULTILIB_DIRNAMES    = thumb be armv6k fpu
+ MULTILIB_EXCEPTIONS  = 
+ MULTILIB_MATCHES     =
+ 
++MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard 
++
++
++MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
++MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
++
++
++
+ #MULTILIB_OPTIONS     += mcpu=fa526/mcpu=fa626/mcpu=fa606te/mcpu=fa626te/mcpu=fmp626/mcpu=fa726te
+ #MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
+ #MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
+@@ -38,9 +46,9 @@
+ # Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
+ # express that here?  Also, we really need architecture v5e or later
+ # (mcrr etc).
+-MULTILIB_OPTIONS       += mfloat-abi=hard
+-MULTILIB_DIRNAMES      += fpu
+-MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
++#MULTILIB_OPTIONS       += mfloat-abi=hard
++#MULTILIB_DIRNAMES      += fpu
++#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
+ #MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
+ #MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
+ 
+diff -NBaur gcc-6.2.0/gcc/config/arm/unknown-elf.h gcc-6.2.0-arm/gcc/config/arm/unknown-elf.h
+--- gcc-6.2.0/gcc/config/arm/unknown-elf.h	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.2.0-arm/gcc/config/arm/unknown-elf.h	2016-09-07 08:58:29.977682360 +0100
+@@ -29,7 +29,7 @@
+ #endif
+ 
+ /* Now we define the strings used to build the spec file.  */
+-#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
++#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
+ 
+ #undef  STARTFILE_SPEC
+ #define STARTFILE_SPEC	\
+@@ -97,4 +97,4 @@
+    udivmoddi4, which will depend on the exception unwind routines,
+    which will depend on abort, which is defined in libc.  */ 
+ #undef LINK_GCC_C_SEQUENCE_SPEC
+-#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
+diff -NBaur gcc-6.2.0/gcc/gcc.c gcc-6.2.0-arm/gcc/gcc.c
+--- gcc-6.2.0/gcc/gcc.c	2016-08-15 12:19:34.000000000 +0100
++++ gcc-6.2.0-arm/gcc/gcc.c	2016-09-07 08:58:29.981682360 +0100
+@@ -778,6 +778,11 @@
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1062,6 +1067,7 @@
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1563,6 +1569,7 @@
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff -NBaur gcc-6.2.0/libgcc/config/arm/t-bpabi gcc-6.2.0-arm/libgcc/config/arm/t-bpabi
+--- gcc-6.2.0/libgcc/config/arm/t-bpabi	2012-08-17 16:06:06.000000000 +0100
++++ gcc-6.2.0-arm/libgcc/config/arm/t-bpabi	2016-09-07 08:58:29.985682360 +0100
+@@ -17,4 +17,4 @@
+ # On ARM, specifying -fnon-call-exceptions will needlessly pull in
+ # the unwinder in simple programs which use 64-bit division.  Omitting
+ # the option is safe.
+-LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
++LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
+diff -NBaur gcc-6.2.0/libgcc/crtstuff.c gcc-6.2.0-arm/libgcc/crtstuff.c
+--- gcc-6.2.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.2.0-arm/libgcc/crtstuff.c	2016-09-07 08:58:29.985682360 +0100
+@@ -47,7 +47,7 @@
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
+-
++#define USED_FOR_TARGET
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,
+    this will have to do.  */
+diff -NBaur gcc-6.2.0/libgcc/Makefile.in gcc-6.2.0-arm/libgcc/Makefile.in
+--- gcc-6.2.0/libgcc/Makefile.in	2016-02-25 12:23:52.000000000 +0000
++++ gcc-6.2.0-arm/libgcc/Makefile.in	2016-09-07 08:58:29.989682360 +0100
+@@ -820,7 +820,7 @@
+ # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
+ # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
+ 
+-c_flags := -fexceptions
++c_flags := -fno-exceptions
+ 
+ ifeq ($(enable_shared),yes)
+ 

dkarm-eabi/patches/gdb-7.11.patch

@@ -1,25 +1,7 @@
-diff -Nbaur gdb-7.4/gdb/Makefile.in gdb-7.4-arm/gdb/Makefile.in
+diff -NBaur gdb-7.11/gdb/Makefile.in gdb-7.11-arm/gdb/Makefile.in
---- gdb-7.4/gdb/Makefile.in	2012-01-06 04:43:01.000000000 +0000
+--- gdb-7.11/gdb/Makefile.in	2016-02-24 09:55:15.000000000 +0000
-+++ gdb-7.4-arm/gdb/Makefile.in	2012-02-28 03:07:12.000000000 +0000
++++ gdb-7.11-arm/gdb/Makefile.in	2016-05-13 15:06:03.629019640 +0100
-@@ -2195,10 +2195,10 @@
+@@ -2726,10 +2726,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+#@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+#@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+#@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+#@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.4/sim/common/Make-common.in gdb-7.4-arm/sim/common/Make-common.in
---- gdb-7.4/sim/common/Make-common.in	2012-01-06 04:54:38.000000000 +0000
-+++ gdb-7.4-arm/sim/common/Make-common.in	2012-02-28 03:07:41.000000000 +0000
-@@ -417,10 +417,7 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
  # not atomically write the dependency output file.
@@ -28,6 +10,23 @@ diff -Nbaur gdb-7.4/sim/common/Make-common.in gdb-7.4-arm/sim/common/Make-common
 -@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
 -@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
 +@GMAKE_TRUE@override COMPILE.post = -c -o $@
++@GMAKE_TRUE@override POSTCOMPILE =
+ @GMAKE_TRUE@else
+ @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
+ @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
+diff -NBaur gdb-7.11/sim/common/Make-common.in gdb-7.11-arm/sim/common/Make-common.in
+--- gdb-7.11/sim/common/Make-common.in	2016-02-10 03:19:39.000000000 +0000
++++ gdb-7.11-arm/sim/common/Make-common.in	2016-05-13 15:06:03.633019640 +0100
+@@ -402,10 +402,8 @@
+ # Note that we put the dependencies into a .Tpo file, then move them
+ # into place if the compile succeeds.  We need this because gcc does
+ # not atomically write the dependency output file.
+-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
+-@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
+-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
+-@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
++@GMAKE_TRUE@override COMPILE.post = -c -o $@
++@GMAKE_TRUE@override POSTCOMPILE =
  @GMAKE_TRUE@else
  @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
  @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)

dkarm-eabi/rules/3ds_rules

@@ -0,0 +1,41 @@
+ifeq ($(strip $(DEVKITPRO)),)
+$(error "Please set DEVKITPRO in your environment. export DEVKITPRO=<path to>devkitPro)
+endif
+
+include $(DEVKITARM)/base_rules
+
+PORTLIBS	:=	$(PORTLIBS_PATH)/armv6k $(PORTLIBS_PATH)/3ds
+
+CTRULIB	?=	$(DEVKITPRO)/libctru
+
+ifeq ($(strip $(APP_TITLE)),)
+APP_TITLE	:=	$(notdir $(OUTPUT))
+endif
+
+ifeq ($(strip $(APP_DESCRIPTION)),)
+APP_DESCRIPTION	:=	Built with devkitARM & libctru
+endif
+
+ifeq ($(strip $(APP_AUTHOR)),)
+APP_AUTHOR	:=	Unspecified Author
+endif
+
+ifeq ($(strip $(APP_ICON)),)
+APP_ICON	:=	$(CTRULIB)/default_icon.png
+endif
+
+#---------------------------------------------------------------------------------
+%.smdh: $(APP_ICON) $(MAKEFILE_LIST)
+	@smdhtool --create "$(APP_TITLE)" "$(APP_DESCRIPTION)" "$(APP_AUTHOR)" $(APP_ICON) $@
+	@echo built ... $(notdir $@)
+
+#---------------------------------------------------------------------------------
+%.3dsx: %.elf
+	@3dsxtool $< $@ $(_3DSXFLAGS)
+	@echo built ... $(notdir $@)
+
+#---------------------------------------------------------------------------------
+%.elf:
+	@echo linking $(notdir $@)
+	@$(LD) $(LDFLAGS) $(OFILES) $(LIBPATHS) $(LIBS) -o $@
+	@$(NM) -CSn $@ > $(notdir $*.lst)

dkarm-eabi/rules/base_rules

@@ -1,36 +1,10 @@
-#---------------------------------------------------------------------------------
+include $(DEVKITARM)/base_tools
-# change shell on Snow Leopard
-#---------------------------------------------------------------------------------
-UNAME_S	:=	$(shell uname -s)
-UNAME_R	:=	$(shell uname -r)
-
-ifneq (,$(findstring Darwin,$(UNAME_S)))
-	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
-		export SHELL=/bin/bash
-	endif
-endif
-#---------------------------------------------------------------------------------
-# path to tools
-#---------------------------------------------------------------------------------
-export PORTLIBS	:=	$(DEVKITPRO)/portlibs/arm
-export PATH	:=	$(DEVKITARM)/bin:$(PORTLIBS)/bin:$(PATH)
 
 #---------------------------------------------------------------------------------
-# the prefix on the compiler executables
+# add portlibs path
 #---------------------------------------------------------------------------------
-PREFIX		:=	arm-eabi-
+export PORTLIBS_PATH	:=	$(DEVKITPRO)/portlibs
 
-export CC	:=	$(PREFIX)gcc
-export CXX	:=	$(PREFIX)g++
-export AS	:=	$(PREFIX)as
-export AR	:=	$(PREFIX)ar
-export OBJCOPY	:=	$(PREFIX)objcopy
-
-ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
-
-ifneq (,$(ISVC))
-	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
-endif
 
 #---------------------------------------------------------------------------------
 %.a:
@@ -43,7 +17,7 @@ endif
 %.arm.o: %.arm.cpp
 	@echo $(notdir $<)
 	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.arm.d $(CXXFLAGS) -marm -c $< -o $@ $(ERROR_FILTER)
-	
+
 #---------------------------------------------------------------------------------
 %.arm.o: %.arm.c
 	@echo $(notdir $<)
@@ -58,7 +32,7 @@ endif
 %.thumb.o: %.thumb.cpp
 	@echo $(notdir $<)
 	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.thumb.d $(CXXFLAGS) -mthumb -c $< -o $@ $(ERROR_FILTER)
-	
+
 #---------------------------------------------------------------------------------
 %.thumb.o: %.thumb.c
 	@echo $(notdir $<)
@@ -73,7 +47,7 @@ endif
 %.iwram.o: %.iwram.cpp
 	@echo $(notdir $<)
 	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.iwram.d $(CXXFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-	
+
 #---------------------------------------------------------------------------------
 %.iwram.o: %.iwram.c
 	@echo $(notdir $<)
@@ -88,7 +62,7 @@ endif
 %.itcm.o: %.itcm.cpp
 	@echo $(notdir $<)
 	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.itcm.d $(CXXFLAGS) -marm -mlong-calls -c $< -o $@ $(ERROR_FILTER)
-	
+
 #---------------------------------------------------------------------------------
 %.itcm.o: %.itcm.c
 	@echo $(notdir $<)
@@ -104,7 +78,7 @@ endif
 %.o: %.cpp
 	@echo $(notdir $<)
 	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
-	
+
 #---------------------------------------------------------------------------------
 %.o: %.c
 	@echo $(notdir $<)

dkarm-eabi/rules/base_tools

@@ -0,0 +1,33 @@
+#---------------------------------------------------------------------------------
+# make sure we have bash on OSX
+#---------------------------------------------------------------------------------
+UNAME_S	:=	$(shell uname -s)
+UNAME_R	:=	$(shell uname -r)
+
+ifneq (,$(findstring Darwin,$(UNAME_S)))
+	export SHELL=/bin/bash
+endif
+#---------------------------------------------------------------------------------
+# path to tools
+#---------------------------------------------------------------------------------
+export PATH	:=	$(DEVKITARM)/bin:$(PATH)
+
+#---------------------------------------------------------------------------------
+# the prefix on the compiler executables
+#---------------------------------------------------------------------------------
+PREFIX		:=	arm-none-eabi-
+
+export CC	:=	$(PREFIX)gcc
+export CXX	:=	$(PREFIX)g++
+export AS	:=	$(PREFIX)as
+export AR	:=	$(PREFIX)gcc-ar
+export OBJCOPY	:=	$(PREFIX)objcopy
+export STRIP	:=	$(PREFIX)strip
+export NM	:=	$(PREFIX)gcc-nm
+export RANLIB	:=	$(PREFIX)gcc-ranlib
+
+ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
+
+ifneq (,$(ISVC))
+	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
+endif

dkarm-eabi/rules/ds_rules

@@ -4,18 +4,20 @@ endif
 
 include $(DEVKITARM)/base_rules
 
-LIBNDS	:=	$(DEVKITPRO)/libnds
+PORTLIBS	:=	$(PORTLIBS_PATH)/nds $(PORTLIBS_PATH)/armv5te
+
+LIBNDS		:=	$(DEVKITPRO)/libnds
 
 ifeq ($(strip $(GAME_TITLE)),)
 GAME_TITLE	:=	$(notdir $(OUTPUT))
 endif
 
 ifeq ($(strip $(GAME_SUBTITLE1)),)
-GAME_SUBTITLE1	:=	www.devkitpro.org
+GAME_SUBTITLE1	:=	built with devkitARM
 endif
 
 ifeq ($(strip $(GAME_SUBTITLE2)),)
-GAME_SUBTITLE2	:=	www.drunkencoders.com
+GAME_SUBTITLE2	:=	http://devkitpro.org
 endif
 
 ifeq ($(strip $(GAME_ICON)),)
@@ -40,7 +42,7 @@ endif
 %.arm9: %.elf
 	@$(OBJCOPY) -O binary $< $@
 	@echo built ... $(notdir $@)
- 
+
 #---------------------------------------------------------------------------------
 %.arm7: %.elf
 	@$(OBJCOPY) -O binary $< $@

dkarm-eabi/rules/gba_rules

@@ -4,6 +4,8 @@ endif
 
 include $(DEVKITARM)/base_rules
 
+PORTLIBS	:=	$(PORTLIBS_PATH)/gba $(PORTLIBS_PATH)/armv4
+
 LIBGBA	:=	$(DEVKITPRO)/libgba
 
 #---------------------------------------------------------------------------------

dkarm-eabi/rules/gp32_rules

@@ -1,5 +1,7 @@
 -include $(DEVKITARM)/base_rules
 
+PORTLIBS	:=	$(PORTLIBS_PATH)/gp32 $(PORTLIBS_PATH)/armv4
+
 LIBMIRKO	:=	$(DEVKITPRO)/libmirko
 
 #---------------------------------------------------------------------------------

dkarm-eabi/scripts/build-crtls.sh

@@ -12,8 +12,8 @@ cp -v $BUILDSCRIPTDIR/dkarm-eabi/rules/* $prefix
 # Install and build the gba crt
 #---------------------------------------------------------------------------------
 
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/arm-eabi/lib/
+cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/$target/lib/
-cd $prefix/arm-eabi/lib/
+cd $prefix/$target/lib/
 $MAKE CRT=gba
 $MAKE CRT=gp32
 $MAKE CRT=er
@@ -21,12 +21,26 @@ $MAKE CRT=gp32_gpsdk
 $MAKE CRT=ds_arm7
 $MAKE CRT=ds_arm9
 $MAKE CRT=ds_cart
+$MAKE ds_arm7_vram_crt0
+$MAKE 3dsx_crt0
+
+cd $BUILDDIR/libgba-$LIBGBA_VER
+$MAKE || { echo "error building libgba"; exit 1; }
+$MAKE install || { echo "error installing libgba"; exit 1; }
 
 cd $BUILDDIR/libnds-$LIBNDS_VER
 $MAKE || { echo "error building libnds"; exit 1; }
 $MAKE install || { echo "error installing libnds"; exit 1; }
 
-cd $BUILDDIR/default-arm7-$DEFAULT_ARM7_VER
+cd $BUILDDIR/dswifi-$DSWIFI_VER
+$MAKE || { echo "error building dswifi"; exit 1; }
+$MAKE install || { echo "error installing dswifi"; exit 1; }
+
+cd $BUILDDIR/maxmod-$MAXMOD_VER
+$MAKE || { echo "error building maxmod"; exit 1; }
+$MAKE install || { echo "error installing maxmod"; exit 1; }
+
+cd $BUILDDIR/default_arm7-$DEFAULT_ARM7_VER
 $MAKE || { echo "error building default arm7"; exit 1; }
 $MAKE install || { echo "error installing default arm7"; exit 1; }
 
@@ -34,14 +48,19 @@ cd $BUILDDIR/libfat-$LIBFAT_VER
 $MAKE nds-install || { echo "error building nds libfat"; exit 1; }
 $MAKE gba-install || { echo "error installing gba libfat"; exit 1; }
 
-cd $BUILDDIR/maxmod-$MAXMOD_VER
+#cd $BUILDDIR/libmirko-$LIBMIRKO_VER
-$MAKE || { echo "error building maxmod"; exit 1; }
+#$MAKE || { echo "error building libmirko"; exit 1; }
-$MAKE install || { echo "error installing maxmod"; exit 1; }
+#$MAKE install || { echo "error installing libmirko"; exit 1; }
-
-cd $BUILDDIR/libmirko-$LIBMIRKO_VER
-$MAKE || { echo "error building libmirko"; exit 1; }
-$MAKE install || { echo "error installing libmirko"; exit 1; }
 
 cd $BUILDDIR/libfilesystem-$FILESYSTEM_VER
 $MAKE || { echo "error building libfilesystem"; exit 1; }
 $MAKE install || { echo "error installing libfilesystem"; exit 1; }
+
+cd $BUILDDIR/libctru-$LIBCTRU_VER
+$MAKE || { echo "error building libctru"; exit 1; }
+$MAKE install || { echo "error installing libctru"; exit 1; }
+
+cd $BUILDDIR/citro3d-$CITRO3D_VER
+$MAKE || { echo "error building libctru"; exit 1; }
+$MAKE install || { echo "error installing libctru"; exit 1; }
+

dkarm-eabi/scripts/build-gcc.sh

@@ -1,6 +1,10 @@
 #!/bin/sh
 #---------------------------------------------------------------------------------
 
+numcores=`getconf _NPROCESSORS_ONLN`
+
+numjobs=$(($numcores * 2 + 1))
+
 #---------------------------------------------------------------------------------
 # build and install binutils
 #---------------------------------------------------------------------------------
@@ -11,7 +15,7 @@ cd $target/binutils
 if [ ! -f configured-binutils ]
 then
 	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
-        --prefix=$prefix --target=$target --disable-nls --disable-dependency-tracking --disable-werror \
+        --prefix=$prefix --target=$target --disable-nls --disable-werror \
 	--enable-lto --enable-plugins --enable-poison-system-directories \
 	$CROSS_PARAMS \
         || { echo "Error configuring binutils"; exit 1; }
@@ -20,7 +24,7 @@ fi
 
 if [ ! -f built-binutils ]
 then
-  $MAKE || { echo "Error building binutils"; exit 1; }
+  $MAKE -j$numjobs || { echo "Error building binutils"; exit 1; }
   touch built-binutils
 fi
 
@@ -34,18 +38,26 @@ cd $BUILDDIR
 #---------------------------------------------------------------------------------
 # build and install just the c compiler
 #---------------------------------------------------------------------------------
-mkdir -p $target/gcc-stage1
+mkdir -p $target/gcc
-cd $target/gcc-stage1
+cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
+	CFLAGS="$cflags" \
+	CXXFLAGS="$cflags" \
+	LDFLAGS="$ldflags" \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	LDFLAGS_FOR_TARGET="" \
+	../../gcc-$GCC_VER/configure \
 		--enable-languages=c,c++,objc,obj-c++ \
+		--with-gnu-as --with-gnu-ld --with-gcc \
 		--with-march=armv4t\
+		--enable-cxx-flags='-ffunction-sections' \
+		--disable-libstdcxx-verbose \
 		--enable-poison-system-directories \
 		--enable-interwork --enable-multilib \
-		--disable-dependency-tracking \
+		--enable-threads --disable-win32-registry --disable-nls --disable-debug\
-		--disable-threads --disable-win32-registry --disable-nls --disable-debug\
 		--disable-libmudflap --disable-libssp --disable-libgomp \
 		--disable-libstdcxx-pch \
 		--target=$target \
@@ -53,7 +65,8 @@ then
 		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 		--prefix=$prefix \
 		--enable-lto $plugin_ld\
-		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 39" \
+		--with-system-zlib \
+		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 46" \
 		$CROSS_PARAMS \
 		|| { echo "Error configuring gcc"; exit 1; }
 	touch configured-gcc
@@ -61,7 +74,7 @@ fi
 
 if [ ! -f built-gcc ]
 then
-	$MAKE all-gcc || { echo "Error building gcc stage1"; exit 1; }
+	$MAKE all-gcc -j$numjobs || { echo "Error building gcc stage1"; exit 1; }
 	touch built-gcc
 fi
 
@@ -83,10 +96,11 @@ cd $target/newlib
 
 if [ ! -f configured-newlib ]
 then
-	CFLAGS_FOR_TARGET="-DREENTRANT_SYSCALLS_PROVIDED -D__DEFAULT_UTF8__ -O2" ../../newlib-$NEWLIB_VER/configure \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	../../newlib-$NEWLIB_VER/configure \
 	--disable-newlib-supplied-syscalls \
 	--enable-newlib-mb \
-	--enable-newlib-io-long-long \
+	--disable-newlib-wide-orient \
 	--target=$target \
 	--prefix=$prefix \
 	|| { echo "Error configuring newlib"; exit 1; }
@@ -95,7 +109,7 @@ fi
 
 if [ ! -f built-newlib ]
 then
-	$MAKE || { echo "Error building newlib"; exit 1; }
+	$MAKE -j$numjobs || { echo "Error building newlib"; exit 1; }
 	touch built-newlib
 fi
 
@@ -116,7 +130,7 @@ cd $target/gcc
 
 if [ ! -f built-stage2 ]
 then
-	$MAKE all || { echo "Error building gcc stage2"; exit 1; }
+	$MAKE all -j$numjobs || { echo "Error building gcc stage2"; exit 1; }
 	touch built-stage2
 fi
 
@@ -140,9 +154,11 @@ PLATFORM=`uname -s`
 
 if [ ! -f configured-gdb ]
 then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" ../../gdb-$GDB_VER/configure \
+	CFLAGS="$cflags" \
+	CXXFLAGS="$cflags" \
+	LDFLAGS="$ldflags" \
+	../../gdb-$GDB_VER/configure \
 	--disable-nls --prefix=$prefix --target=$target --disable-werror \
-	--disable-dependency-tracking \
 	$CROSS_PARAMS \
 	|| { echo "Error configuring gdb"; exit 1; }
 	touch configured-gdb
@@ -150,7 +166,7 @@ fi
 
 if [ ! -f built-gdb ]
 then
-	$MAKE || { echo "Error building gdb"; exit 1; }
+	$MAKE -j$numjobs || { echo "Error building gdb"; exit 1; }
 	touch built-gdb
 fi
 

dkarm-eabi/scripts/build-tools.sh

@@ -10,11 +10,11 @@ do
 		touch configured
 	fi
 	if [ ! -f built ]; then
-		$MAKE || { echo "error building $archive"; exit 1; }
+		$MAKE || { echo "error building $dir"; exit 1; }
 		touch built
 	fi
 	if [ ! -f installed ]; then
-		$MAKE install || { echo "error installing $archive"; exit 1; }
+		$MAKE install || { echo "error installing $dir"; exit 1; }
 		touch installed
 	fi
 done

dkppc/crtls/wup.ld

@@ -0,0 +1,257 @@
+/*
+ * Linkscript for Wii U
+ */
+
+OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc");
+OUTPUT_ARCH(powerpc:common);
+EXTERN(_start);
+ENTRY(_start);
+
+PHDRS
+{
+  stub PT_LOAD FLAGS(5);
+  text PT_LOAD FLAGS(5);
+  data PT_LOAD FLAGS(6);
+  bss1 PT_LOAD;
+  bss2 PT_LOAD;
+}
+
+SECTIONS
+{
+	/* default base address */
+	/* use -Wl,--section-start,.init=0xADDRESS to change */
+	. = 0x00802000;
+
+	/* Program */
+	.init          :
+	{
+		KEEP (*crt0.o(*.init))
+		KEEP (*(.init))
+	} :text = 0
+	.plt      : { *(.plt)	}
+	.interp			: { *(.interp) 	}
+	.hash			: { *(.hash) }
+	.dynsym			: { *(.dynsym) }
+	.dynstr			: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+	.rel.init		: { *(.rel.init) }
+	.rela.init		: { *(.rela.init) }
+	.rel.text		: { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
+	.rela.text		: { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
+	.rel.fini		: { *(.rel.fini) }
+	.rela.fini		: { *(.rela.fini) }
+	.rel.rodata		: { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
+	.rela.rodata	: { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
+	.rel.data		: { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
+	.rela.data		: { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
+	.rel.tdata		: { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
+	.rela.tdata		: { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
+	.rel.tbss		: { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
+	.rela.tbss		: { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
+	.rel.ctors		: { *(.rel.ctors) }
+	.rela.ctors		: { *(.rela.ctors) }
+	.rel.dtors		: { *(.rel.dtors) }
+	.rela.dtors		: { *(.rela.dtors) }
+	.rel.got		: { *(.rel.got)	}
+	.rela.got		: { *(.rela.got) }
+	.rela.got1		: { *(.rela.got1) }
+	.rela.got2		: { *(.rela.got2) }
+	.rel.sdata		: { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
+	.rela.sdata		: { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
+	.rel.sbss		: { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
+	.rela.sbss		: { *(.rela.sbss .rela.sbss.* .rel.gnu.linkonce.sb.*) }
+	.rel.sdata2		: { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
+	.rela.sdata2	: { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
+	.rel.sbss2		: { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
+	.rela.sbss2		: { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
+	.rel.bss		: { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
+	.rela.bss		: { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
+	.rel.plt		: { *(.rel.plt) }
+	.rela.plt		: { *(.rela.plt) }
+
+	.text      :
+	{
+		*(.text)
+		*(.text.*)
+		/* .gnu.warning sections are handled specially by elf32.em.  */
+		*(.gnu.warning)
+		*(.gnu.linkonce.t.*)
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	} = 0
+
+	.fini      :
+	{
+		KEEP (*(.fini))
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	} = 0
+	
+	PROVIDE (__etext = .);
+	PROVIDE (_etext = .);
+	PROVIDE (etext = .);
+
+	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
+	.rodata1   : { *(.rodata1) }
+	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
+	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  /* Ensure the __preinit_array_start label is properly aligned.  We
+     could instead move the label definition inside the section, but
+     the linker would then create the section even if it turns out to
+     be empty, which isn't pretty.  */
+	. = ALIGN(32 / 8);
+	PROVIDE (__preinit_array_start = .);
+	.preinit_array     : { *(.preinit_array) }
+	PROVIDE (__preinit_array_end = .);
+	PROVIDE (__init_array_start = .);
+	.init_array     : { *(.init_array) }
+	PROVIDE (__init_array_end = .);
+	PROVIDE (__fini_array_start = .);
+	.fini_array     : { *(.fini_array) }
+	PROVIDE (__fini_array_end = .);
+	.data    :
+	{
+		*(.data)
+		*(.data.*)
+		*(.gnu.linkonce.d.*)
+		SORT(CONSTRUCTORS)
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	}
+
+	.data1   : { *(.data1) }
+	.tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+	.tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
+	.eh_frame : { KEEP (*(.eh_frame)) }
+	.gcc_except_table : { *(.gcc_except_table) }
+	.fixup          : { *(.fixup) }
+	.got1           : { *(.got1) }
+	.got2           : { *(.got2) }
+	.dynamic       : { *(.dynamic) }
+
+	.ctors   :
+	{
+	/*	gcc uses crtbegin.o to find the start of
+		the constructors, so we make sure it is
+		first.  Because this is a wildcard, it
+		doesn't matter if the user does not
+		actually link against crtbegin.o; the
+		linker won't look for a file to match a
+		wildcard.  The wildcard also means that it
+		doesn't matter which directory crtbegin.o
+		is in.  */
+
+		KEEP (*crtbegin.o(.ctors))
+
+    /*	We don't want to include the .ctor section from
+		from the crtend.o file until after the sorted ctors.
+		The .ctor section from the crtend file contains the
+		end of ctors marker and it must be last */
+
+		KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
+		KEEP (*(SORT(.ctors.*)))
+		KEEP (*(.ctors))
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	}
+
+	.dtors         :
+	{
+		KEEP (*crtbegin.o(.dtors))
+		KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
+		KEEP (*(SORT(.dtors.*)))
+		KEEP (*(.dtors))
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	}
+
+	.jcr            : { KEEP (*(.jcr)) }
+	.got		  : { *(.got.plt) *(.got) }
+
+
+	/*	We want the small data sections together, so single-instruction offsets
+		can access them all, and initialized data all before uninitialized, so
+		we can shorten the on-disk segment size.  */
+
+	.sdata     :
+	{
+		*(.sdata)
+		*(.sdata.*)
+		*(.gnu.linkonce.s.*)
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+	}
+
+	_edata = .;
+	PROVIDE (edata = .);
+	
+	.sbss      :
+	{
+		__sbss_start = .;
+		PROVIDE (__sbss_start = .);
+		PROVIDE (___sbss_start = .);
+		*(.dynsbss)
+		*(.sbss)
+		*(.sbss.*)
+		*(.gnu.linkonce.sb.*)
+		*(.scommon)
+		PROVIDE (__sbss_end = .);
+		PROVIDE (___sbss_end = .);
+		. = ALIGN(32);   /* REQUIRED. LD is flaky without it. */
+		__sbss_end = .;
+	} :bss1
+
+	.bss       :
+	{
+		__bss_start = .;
+		PROVIDE (__bss_start = .);
+		*(.dynbss)
+		*(.bss)
+		*(.bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+	/*	Align here to ensure that the .bss section occupies space up to
+		_end.  Align after .bss to ensure correct alignment even if the
+		.bss section disappears because there are no input sections.  */
+
+		. = ALIGN(32);
+
+		PROVIDE (__bss_end = .);
+		__bss_end = .;
+	} :bss2
+
+	_end = .;
+	PROVIDE(end = .);
+	/* Stabs debugging sections.  */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	/*	DWARF debug sections.
+		Symbols in the DWARF debugging sections are relative to the beginning
+		of the section so we begin them at 0.  */
+	/* DWARF 1 */
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+	/* GNU DWARF 1 extensions */
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+	/* DWARF 1.1 and DWARF 2 */
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	/* DWARF 2 */
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+	/* SGI/MIPS DWARF 2 extensions */
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames  0 : { *(.debug_varnames) }
+	/* These must appear regardless of  .  */
+}

dkppc/patches/binutils-2.22.patch

@@ -1,149 +0,0 @@
-diff -Nbaur binutils-2.22/bfd/bfd-in2.h binutils-2.22-ppc/bfd/bfd-in2.h
---- binutils-2.22/bfd/bfd-in2.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-ppc/bfd/bfd-in2.h	2012-04-03 15:06:10.000000000 +0100
-@@ -38,6 +38,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -308,8 +310,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/bfd-in.h binutils-2.22-ppc/bfd/bfd-in.h
---- binutils-2.22/bfd/bfd-in.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-ppc/bfd/bfd-in.h	2012-04-03 15:06:10.000000000 +0100
-@@ -31,6 +31,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -301,8 +303,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/config.in binutils-2.22-ppc/bfd/config.in
---- binutils-2.22/bfd/config.in	2011-05-12 08:41:40.000000000 +0100
-+++ binutils-2.22-ppc/bfd/config.in	2012-04-03 14:50:51.000000000 +0100
-@@ -245,6 +245,9 @@
- /* Define if <sys/procfs.h> has win32_pstatus_t. */
- #undef HAVE_WIN32_PSTATUS_T
- 
-+/* Define to 1 if you have the <windows.h> header file. */
-+#undef HAVE_WINDOWS_H
-+
- /* Define to 1 if you have the <zlib.h> header file. */
- #undef HAVE_ZLIB_H
- 
-diff -Nbaur binutils-2.22/bfd/configure binutils-2.22-ppc/bfd/configure
---- binutils-2.22/bfd/configure	2011-11-21 11:55:48.000000000 +0000
-+++ binutils-2.22-ppc/bfd/configure	2012-04-03 14:50:59.000000000 +0100
-@@ -13508,6 +13508,22 @@
- 
- fi
- 
-+
-+for ac_header in windows.h dlfcn.h
-+do :
-+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-+eval as_val=\$$as_ac_Header
-+   if test "x$as_val" = x""yes; then :
-+  cat >>confdefs.h <<_ACEOF
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
- $as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
- if test "${gcc_cv_header_string+set}" = set; then :
-diff -Nbaur binutils-2.22/bfd/configure.in binutils-2.22-ppc/bfd/configure.in
---- binutils-2.22/bfd/configure.in	2011-11-21 11:55:46.000000000 +0000
-+++ binutils-2.22-ppc/bfd/configure.in	2012-04-03 14:51:23.000000000 +0100
-@@ -190,6 +190,9 @@
- GCC_HEADER_STDINT(bfd_stdint.h)
- AC_HEADER_TIME
- AC_HEADER_DIRENT
-+
-+AC_CHECK_HEADERS(windows.h dlfcn.h)
-+
- ACX_HEADER_STRING
- AC_CHECK_FUNCS(fcntl getpagesize setitimer sysconf fdopen getuid getgid fileno)
- AC_CHECK_FUNCS(strtoull)
-diff -Nbaur binutils-2.22/bfd/plugin.c binutils-2.22-ppc/bfd/plugin.c
---- binutils-2.22/bfd/plugin.c	2011-07-11 16:03:07.000000000 +0100
-+++ binutils-2.22-ppc/bfd/plugin.c	2012-04-03 14:51:32.000000000 +0100
-@@ -25,7 +25,13 @@
- #if BFD_SUPPORTS_PLUGINS
- 
- #include <assert.h>
-+#ifdef HAVE_DLFCN_H
- #include <dlfcn.h>
-+#elif defined (HAVE_WINDOWS_H)
-+#include <windows.h>
-+#else
-+#error Unknown how to handle dynamic-load-libraries.
-+#endif
- #include <stdarg.h>
- #include "plugin-api.h"
- #include "sysdep.h"
-@@ -34,6 +40,37 @@
- #include "libiberty.h"
- #include <dirent.h>
- 
-+#if !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)
-+
-+#define RTLD_NOW 0      /* Dummy value.  */
-+
-+static void *
-+dlopen (const char *file, int mode ATTRIBUTE_UNUSED)
-+{
-+  return LoadLibrary (file);
-+}
-+
-+static void *
-+dlsym (void *handle, const char *name)
-+{
-+  return GetProcAddress (handle, name);
-+}
-+
-+static int ATTRIBUTE_UNUSED
-+dlclose (void *handle)
-+{
-+  FreeLibrary (handle);
-+  return 0;
-+}
-+
-+static const char *
-+dlerror (void)
-+{
-+  return "Unable to load DLL.";
-+}
-+
-+#endif /* !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)  */
-+
- #define bfd_plugin_close_and_cleanup                  _bfd_generic_close_and_cleanup
- #define bfd_plugin_bfd_free_cached_info               _bfd_generic_bfd_free_cached_info
- #define bfd_plugin_new_section_hook                   _bfd_generic_new_section_hook

dkppc/patches/binutils-2.27.patch

@@ -0,0 +1,12 @@
+diff -Nbaur binutils-2.27/opcodes/ppc-opc.c binutils-2.27-ppc/opcodes/ppc-opc.c
+--- binutils-2.27/opcodes/ppc-opc.c	2016-08-03 08:36:54.000000000 +0100
++++ binutils-2.27-ppc/opcodes/ppc-opc.c	2016-11-08 21:37:45.360000000 +0000
+@@ -3037,7 +3037,7 @@
+ #define MFDEC1	PPC_OPCODE_POWER
+ #define MFDEC2	PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE | PPC_OPCODE_TITAN
+ #define BOOKE	PPC_OPCODE_BOOKE
+-#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS
++#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS
+ #define PPCE300 PPC_OPCODE_E300
+ #define PPCSPE	PPC_OPCODE_SPE
+ #define PPCISEL PPC_OPCODE_ISEL

dkppc/patches/gcc-6.2.0.patch

@@ -0,0 +1,330 @@
+diff -NBaur gcc-6.1.0/gcc/config/rs6000/rs6000.h gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h
+--- gcc-6.1.0/gcc/config/rs6000/rs6000.h	2016-01-20 20:30:24.000000000 +0000
++++ gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h	2016-05-20 12:10:24.645019640 +0100
+@@ -205,6 +205,7 @@
+   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
+   SUBTARGET_EXTRA_SPECS
+ 
++#if 0
+ /* -mcpu=native handling only makes sense with compiler running on
+    an PowerPC chip.  If changing this condition, also change
+    the condition in driver-rs6000.c.  */
+@@ -219,6 +220,8 @@
+ #else
+ #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ #endif
++#endif
++#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ 
+ #ifndef CC1_CPU_SPEC
+ #ifdef HAVE_LOCAL_CPU_DETECT
+diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.h gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h
+--- gcc-6.1.0/gcc/config/rs6000/sysv4.h	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h	2016-05-20 12:12:27.073019640 +0100
+@@ -559,7 +559,12 @@
+ 
+ /* Default starting address if specified.  */
+ #define LINK_START_SPEC "\
+-%{mads         : %(link_start_ads)         ; \
++%{mgcn|mogc    : %(link_start_ogc)         ; \
++  mvgc         : %(link_start_vgc)         ; \
++  mgcbios      : %(link_start_gcb)         ; \
++  mrvl         : %(link_start_rvl)         ; \
++  mwup         : %(link_start_wup)         ; \
++  mads         : %(link_start_ads)         ; \
+   myellowknife : %(link_start_yellowknife) ; \
+   mmvme        : %(link_start_mvme)        ; \
+   msim         : %(link_start_sim)         ; \
+@@ -590,7 +594,9 @@
+ 
+ /* Any specific OS flags.  */
+ #define LINK_OS_SPEC "\
+-%{mads         : %(link_os_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
++  mwup         : %(link_os_wup)         ; \
++  mads         : %(link_os_ads)         ; \
+   myellowknife : %(link_os_yellowknife) ; \
+   mmvme        : %(link_os_mvme)        ; \
+   msim         : %(link_os_sim)         ; \
+@@ -608,7 +613,11 @@
+ /* Override rs6000.h definition.  */
+ #undef	CPP_SPEC
+ #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
+-%{mads         : %(cpp_os_ads)         ; \
++%{mgcn         : %(cpp_os_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
++  mrvl         : %(cpp_os_rvl)         ; \
++  mwup         : %(cpp_os_wup)         ; \
++  mads         : %(cpp_os_ads)         ; \
+   myellowknife : %(cpp_os_yellowknife) ; \
+   mmvme        : %(cpp_os_mvme)        ; \
+   msim         : %(cpp_os_sim)         ; \
+@@ -622,7 +630,11 @@
+ 
+ #undef	STARTFILE_SPEC
+ #define	STARTFILE_SPEC "\
+-%{mads         : %(startfile_ads)         ; \
++%{mgcn         : %(startfile_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
++  mrvl         : %(startfile_ogc)         ; \
++  mwup         : %(startfile_wup)         ; \
++  mads         : %(startfile_ads)         ; \
+   myellowknife : %(startfile_yellowknife) ; \
+   mmvme        : %(startfile_mvme)        ; \
+   msim         : %(startfile_sim)         ; \
+@@ -632,11 +643,13 @@
+   mcall-openbsd: %(startfile_openbsd)     ; \
+                : %(startfile_default)     }"
+ 
+-#define	STARTFILE_DEFAULT_SPEC "ecrti.o%s crtbegin.o%s"
++#define	STARTFILE_DEFAULT_SPEC "crt0.o%s ecrti.o%s crtbegin.o%s"
+ 
+ #undef	LIB_SPEC
+ #define	LIB_SPEC "\
+-%{mads         : %(lib_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
++  mwup         : %(lib_wup)         ; \
++  mads         : %(lib_ads)         ; \
+   myellowknife : %(lib_yellowknife) ; \
+   mmvme        : %(lib_mvme)        ; \
+   msim         : %(lib_sim)         ; \
+@@ -646,11 +658,13 @@
+   mcall-openbsd: %(lib_openbsd)     ; \
+                : %(lib_default)     }"
+ 
+-#define LIB_DEFAULT_SPEC "-lc"
++#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #undef	ENDFILE_SPEC
+ #define	ENDFILE_SPEC "\
+-%{mads         : %(endfile_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
++  mwup         : %(endfile_wup)         ; \
++  mads         : %(endfile_ads)         ; \
+   myellowknife : %(endfile_yellowknife) ; \
+   mmvme        : %(endfile_mvme)        ; \
+   msim         : %(endfile_sim)         ; \
+@@ -666,16 +679,33 @@
+ 
+ /* Motorola ADS support.  */
+ #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
++#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
++#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
++#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
++#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
+ 
+ #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
+ 
+ #define LINK_START_ADS_SPEC "-T ads.ld%s"
++#define LINK_START_OGC_SPEC "-T ogc.ld%s"
++#define LINK_START_RVL_SPEC "-T rvl.ld%s"
++#define LINK_START_WUP_SPEC "-T wup.ld%s"
++#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
++#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
+ 
+ #define LINK_OS_ADS_SPEC ""
++#define LINK_OS_OGC_SPEC "--gc-sections"
++#define LINK_OS_WUP_SPEC "--gc-sections"
+ 
+ #define CPP_OS_ADS_SPEC ""
++#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
++#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
++#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
++#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
+ 
+ /* Motorola Yellowknife support.  */
+ #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
+@@ -855,6 +879,8 @@
+ #undef	SUBTARGET_EXTRA_SPECS
+ #define	SUBTARGET_EXTRA_SPECS						\
+   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
++  { "lib_ogc",			LIB_OGC_SPEC },				\
++  { "lib_wup",			LIB_WUP_SPEC },	                        \
+   { "lib_ads",			LIB_ADS_SPEC },				\
+   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
+   { "lib_mvme",			LIB_MVME_SPEC },			\
+@@ -864,6 +889,8 @@
+   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
+   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
+   { "lib_default",		LIB_DEFAULT_SPEC },			\
++  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
++  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
+   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
+   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
+   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
+@@ -873,6 +899,8 @@
+   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
+   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
+   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
++  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
++  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
+   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
+   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
+   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
+@@ -884,7 +911,12 @@
+   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
+   { "link_shlib",		LINK_SHLIB_SPEC },			\
+   { "link_start",		LINK_START_SPEC },			\
++  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
++  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
++  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
++  { "link_start_wup",		LINK_START_WUP_SPEC },			\
+   { "link_start_ads",		LINK_START_ADS_SPEC },			\
++  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
+   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
+   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
+   { "link_start_sim",		LINK_START_SIM_SPEC },			\
+@@ -894,6 +925,8 @@
+   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
+   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
+   { "link_os",			LINK_OS_SPEC },				\
++  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
++  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
+   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
+   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
+   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
+@@ -905,6 +937,10 @@
+   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
+   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
+   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
++  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
++  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
++  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
++  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
+   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
+   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
+   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
+diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.opt gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt
+--- gcc-6.1.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt	2016-05-20 12:10:24.649019640 +0100
+@@ -120,6 +120,30 @@
+ Target RejectNegative
+ Link with libads.a, libc.a and crt0.o.
+ 
++mgcn
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mogc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mgcbios
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mvgc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mrvl
++Target RejectNegative
++Link with libsysbase.a and libc.a, use rvl linker script 
++
++mwup
++Target RejectNegative
++Link with libsysbase.a and libc.a, use wup linker script 
++
+ myellowknife
+ Target RejectNegative
+ Link with libyk.a, libc.a and crt0.o.
+diff -NBaur gcc-6.1.0/gcc/config.gcc gcc-6.1.0-ppc/gcc/config.gcc
+--- gcc-6.1.0/gcc/config.gcc	2016-04-11 11:14:59.000000000 +0100
++++ gcc-6.1.0-ppc/gcc/config.gcc	2016-05-20 12:10:24.661019640 +0100
+@@ -2381,7 +2381,7 @@
+ 	use_gcc_stdint=wrap
+ 	;;
+ powerpc-*-eabi*)
+-	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
++	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
+ 	extra_options="${extra_options} rs6000/sysv4.opt"
+ 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ 	use_gcc_stdint=wrap
+diff -NBaur gcc-6.1.0/gcc/Makefile.in gcc-6.1.0-ppc/gcc/Makefile.in
+--- gcc-6.1.0/gcc/Makefile.in	2016-04-15 12:49:39.000000000 +0100
++++ gcc-6.1.0-ppc/gcc/Makefile.in	2016-05-20 12:10:24.641019640 +0100
+@@ -1073,8 +1073,8 @@
+ # things like the go/%.o rule work properly; but we use $(*F) for the
+ # file part, as we just want the file part of the stem, not the entire
+ # file name.
+-COMPILE = $(COMPILE.base) -MT $@ -MMD -MP -MF $(@D)/$(DEPDIR)/$(*F).TPo
+-POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(*F).TPo $(@D)/$(DEPDIR)/$(*F).Po
++COMPILE = $(COMPILE.base)
++POSTCOMPILE =
+ else
+ COMPILE = source='$<' object='$@' libtool=no \
+     DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
+diff -NBaur gcc-6.1.0/libcpp/Makefile.in gcc-6.1.0-ppc/libcpp/Makefile.in
+--- gcc-6.1.0/libcpp/Makefile.in	2016-04-27 09:22:11.000000000 +0100
++++ gcc-6.1.0-ppc/libcpp/Makefile.in	2016-05-20 12:10:24.661019640 +0100
+@@ -208,8 +208,7 @@
+ # Note that we put the dependencies into a .Tpo file, then move them
+ # into place if the compile succeeds.  We need this because gcc does
+ # not atomically write the dependency output file.
+-COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
+-POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++COMPILE = $(COMPILE.base) -o $@
+ else
+ COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
+ 	  $(depcomp) $(COMPILE.base)
+diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S
+--- gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S	2016-05-20 12:10:24.665019640 +0100
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -85,3 +85,4 @@
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S
+--- gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S	2016-05-20 12:10:24.665019640 +0100
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -85,3 +85,4 @@
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff -NBaur gcc-6.1.0/libgcc/crtstuff.c gcc-6.1.0-ppc/libgcc/crtstuff.c
+--- gcc-6.1.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.1.0-ppc/libgcc/crtstuff.c	2016-05-20 12:10:24.669019640 +0100
+@@ -47,6 +47,7 @@
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
++#define USED_FOR_TARGET
+ 
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,
+diff -NBaur gcc-6.1.0/libstdc++-v3/include/std/type_traits gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits
+--- gcc-6.1.0/libstdc++-v3/include/std/type_traits	2016-01-12 21:19:58.000000000 +0000
++++ gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits	2016-05-20 12:10:24.669019640 +0100
+@@ -38,7 +38,7 @@
+ #include <bits/c++config.h>
+ 
+ #ifdef _GLIBCXX_USE_C99_STDINT_TR1
+-# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__)
++# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__) && 0
+ namespace std
+ {
+   typedef __UINT_LEAST16_TYPE__ uint_least16_t;

dkppc/patches/gcc-6.3.0.patch

@@ -1,7 +1,7 @@
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/rs6000.h gcc-4.6.3-ppc/gcc/config/rs6000/rs6000.h
+diff -NBaur gcc-6.3.0/gcc/config/rs6000/rs6000.h gcc-6.3.0-ppc/gcc/config/rs6000/rs6000.h
---- gcc-4.6.3/gcc/config/rs6000/rs6000.h	2011-07-27 19:17:15.000000000 +0100
+--- gcc-6.3.0/gcc/config/rs6000/rs6000.h	2016-07-07 20:42:07.000000000 +0100
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/rs6000.h	2012-04-21 22:54:04.000000000 +0100
++++ gcc-6.3.0-ppc/gcc/config/rs6000/rs6000.h	2017-01-05 02:42:41.980000000 +0000
-@@ -200,6 +200,7 @@
+@@ -205,6 +205,7 @@
    { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
    SUBTARGET_EXTRA_SPECS
  
@@ -9,42 +9,44 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/rs6000.h gcc-4.6.3-ppc/gcc/config/rs6000
  /* -mcpu=native handling only makes sense with compiler running on
     an PowerPC chip.  If changing this condition, also change
     the condition in driver-rs6000.c.  */
-@@ -214,6 +215,8 @@
+@@ -219,6 +220,8 @@
  #else
  #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
  #endif
-+#endif 
++#endif
 +#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
  
  #ifndef CC1_CPU_SPEC
  #ifdef HAVE_LOCAL_CPU_DETECT
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.h
+diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.h
---- gcc-4.6.3/gcc/config/rs6000/sysv4.h	2011-03-07 07:50:23.000000000 +0000
+--- gcc-6.3.0/gcc/config/rs6000/sysv4.h	2016-05-16 14:47:47.000000000 +0100
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.h	2012-04-21 22:54:04.000000000 +0100
++++ gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.h	2017-01-05 02:46:27.020000000 +0000
-@@ -603,7 +603,11 @@
+@@ -559,7 +559,12 @@
  
  /* Default starting address if specified.  */
  #define LINK_START_SPEC "\
 -%{mads         : %(link_start_ads)         ; \
-+%{mgcn|mogc         : %(link_start_ogc)         ; \
++%{mgcn|mogc    : %(link_start_ogc)         ; \
 +  mvgc         : %(link_start_vgc)         ; \
-+  mgcbios         : %(link_start_gcb)         ; \
++  mgcbios      : %(link_start_gcb)         ; \
 +  mrvl         : %(link_start_rvl)         ; \
++  mwup         : %(link_start_wup)         ; \
 +  mads         : %(link_start_ads)         ; \
    myellowknife : %(link_start_yellowknife) ; \
    mmvme        : %(link_start_mvme)        ; \
    msim         : %(link_start_sim)         ; \
-@@ -641,7 +645,8 @@
+@@ -590,7 +595,9 @@
  
  /* Any specific OS flags.  */
  #define LINK_OS_SPEC "\
 -%{mads         : %(link_os_ads)         ; \
 +%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
++  mwup         : %(link_os_wup)         ; \
 +  mads         : %(link_os_ads)         ; \
    myellowknife : %(link_os_yellowknife) ; \
    mmvme        : %(link_os_mvme)        ; \
    msim         : %(link_os_sim)         ; \
-@@ -660,7 +665,10 @@
+@@ -608,7 +615,11 @@
  /* Override rs6000.h definition.  */
  #undef	CPP_SPEC
  #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
@@ -52,11 +54,12 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
 +%{mgcn         : %(cpp_os_gcn)         ; \
 +  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
 +  mrvl         : %(cpp_os_rvl)         ; \
++  mwup         : %(cpp_os_wup)         ; \
 +  mads         : %(cpp_os_ads)         ; \
    myellowknife : %(cpp_os_yellowknife) ; \
    mmvme        : %(cpp_os_mvme)        ; \
    msim         : %(cpp_os_sim)         ; \
-@@ -675,7 +683,10 @@
+@@ -622,7 +633,11 @@
  
  #undef	STARTFILE_SPEC
  #define	STARTFILE_SPEC "\
@@ -64,26 +67,23 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
 +%{mgcn         : %(startfile_gcn)         ; \
 +  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
 +  mrvl         : %(startfile_ogc)         ; \
++  mwup         : %(startfile_wup)         ; \
 +  mads         : %(startfile_ads)         ; \
    myellowknife : %(startfile_yellowknife) ; \
    mmvme        : %(startfile_mvme)        ; \
    msim         : %(startfile_sim)         ; \
-@@ -686,11 +697,12 @@
+@@ -636,7 +651,9 @@
-   mcall-openbsd: %(startfile_openbsd)     ; \
-                : %(startfile_default)     }"
- 
--#define	STARTFILE_DEFAULT_SPEC "ecrti.o%s crtbegin.o%s"
-+#define	STARTFILE_DEFAULT_SPEC "crt0.o%s ecrti.o%s crtbegin.o%s"
  
  #undef	LIB_SPEC
  #define	LIB_SPEC "\
 -%{mads         : %(lib_ads)         ; \
 +%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
++  mwup         : %(lib_wup)         ; \
 +  mads         : %(lib_ads)         ; \
    myellowknife : %(lib_yellowknife) ; \
    mmvme        : %(lib_mvme)        ; \
    msim         : %(lib_sim)         ; \
-@@ -701,11 +713,12 @@
+@@ -646,11 +663,13 @@
    mcall-openbsd: %(lib_openbsd)     ; \
                 : %(lib_default)     }"
  
@@ -94,98 +94,111 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
  #define	ENDFILE_SPEC "\
 -%{mads         : %(endfile_ads)         ; \
 +%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
++  mwup         : %(endfile_wup)         ; \
 +  mads         : %(endfile_ads)         ; \
    myellowknife : %(endfile_yellowknife) ; \
    mmvme        : %(endfile_mvme)        ; \
    msim         : %(endfile_sim)         ; \
-@@ -722,16 +735,27 @@
+@@ -666,16 +685,33 @@
  
  /* Motorola ADS support.  */
  #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
 +#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
++#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
  
  #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
 +#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
++#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
  
  #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
 +#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
  
  #define LINK_START_ADS_SPEC "-T ads.ld%s"
 +#define LINK_START_OGC_SPEC "-T ogc.ld%s"
 +#define LINK_START_RVL_SPEC "-T rvl.ld%s"
++#define LINK_START_WUP_SPEC "-T wup.ld%s"
 +#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
 +#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
  
  #define LINK_OS_ADS_SPEC ""
 +#define LINK_OS_OGC_SPEC "--gc-sections"
++#define LINK_OS_WUP_SPEC "--gc-sections"
  
  #define CPP_OS_ADS_SPEC ""
 +#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
 +#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
 +#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
++#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
  
  /* Motorola Yellowknife support.  */
  #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -926,6 +950,7 @@
+@@ -866,6 +902,8 @@
  #undef	SUBTARGET_EXTRA_SPECS
  #define	SUBTARGET_EXTRA_SPECS						\
    { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
 +  { "lib_ogc",			LIB_OGC_SPEC },				\
++  { "lib_wup",			LIB_WUP_SPEC },	                        \
    { "lib_ads",			LIB_ADS_SPEC },				\
    { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
    { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -936,6 +961,7 @@
+@@ -875,6 +913,8 @@
    { "lib_netbsd",		LIB_NETBSD_SPEC },			\
    { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
    { "lib_default",		LIB_DEFAULT_SPEC },			\
 +  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
++  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
    { "startfile_ads",		STARTFILE_ADS_SPEC },			\
    { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
    { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -946,6 +972,7 @@
+@@ -884,6 +924,8 @@
    { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
    { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
    { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
 +  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
++  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
    { "endfile_ads",		ENDFILE_ADS_SPEC },			\
    { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
    { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -959,7 +986,11 @@
+@@ -895,7 +937,12 @@
+   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
    { "link_shlib",		LINK_SHLIB_SPEC },			\
-   { "link_target",		LINK_TARGET_SPEC },			\
    { "link_start",		LINK_START_SPEC },			\
 +  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
 +  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
 +  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
++  { "link_start_wup",		LINK_START_WUP_SPEC },			\
    { "link_start_ads",		LINK_START_ADS_SPEC },			\
 +  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
    { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
    { "link_start_mvme",		LINK_START_MVME_SPEC },			\
    { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -970,6 +1001,7 @@
+@@ -905,6 +952,8 @@
    { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
    { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
    { "link_os",			LINK_OS_SPEC },				\
 +  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
++  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
    { "link_os_ads",		LINK_OS_ADS_SPEC },			\
    { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
    { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -984,6 +1016,9 @@
+@@ -916,6 +965,10 @@
-   { "cc1_endian_little",	CC1_ENDIAN_LITTLE_SPEC },		\
+   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
-   { "cc1_endian_default",	CC1_ENDIAN_DEFAULT_SPEC },		\
    { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
+   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
 +  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
 +  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
 +  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
++  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
    { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
    { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
    { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.opt gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.opt
+diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.opt gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-4.6.3/gcc/config/rs6000/sysv4.opt	2011-01-03 20:52:22.000000000 +0000
+--- gcc-6.3.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.opt	2012-04-21 22:54:04.000000000 +0100
++++ gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.opt	2017-01-05 02:42:41.984000000 +0000
-@@ -108,6 +108,26 @@
+@@ -120,6 +120,30 @@
  Target RejectNegative
- Link with libads.a, libc.a and crt0.o
+ Link with libads.a, libc.a and crt0.o.
  
 +mgcn
 +Target RejectNegative
@@ -206,26 +219,44 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.opt gcc-4.6.3-ppc/gcc/config/rs600
 +mrvl
 +Target RejectNegative
 +Link with libsysbase.a and libc.a, use rvl linker script 
++
++mwup
++Target RejectNegative
++Link with libsysbase.a and libc.a, use wup linker script 
 +
  myellowknife
  Target RejectNegative
- Link with libyk.a, libc.a and crt0.o
+ Link with libyk.a, libc.a and crt0.o.
-diff -Nbaur gcc-4.6.3/gcc/config.gcc gcc-4.6.3-ppc/gcc/config.gcc
+diff -NBaur gcc-6.3.0/gcc/config.gcc gcc-6.3.0-ppc/gcc/config.gcc
---- gcc-4.6.3/gcc/config.gcc	2011-07-22 17:44:50.000000000 +0100
+--- gcc-6.3.0/gcc/config.gcc	2016-11-07 21:38:43.000000000 +0000
-+++ gcc-4.6.3-ppc/gcc/config.gcc	2012-04-21 22:54:04.000000000 +0100
++++ gcc-6.3.0-ppc/gcc/config.gcc	2017-01-05 02:42:41.984000000 +0000
-@@ -2133,7 +2133,7 @@
+@@ -2390,7 +2390,7 @@
  	use_gcc_stdint=wrap
  	;;
  powerpc-*-eabi*)
 -	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
 +	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
  	extra_options="${extra_options} rs6000/sysv4.opt"
- 	tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
+ 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
  	use_gcc_stdint=wrap
-diff -Nbaur gcc-4.6.3/libcpp/Makefile.in gcc-4.6.3-ppc/libcpp/Makefile.in
+diff -NBaur gcc-6.3.0/gcc/Makefile.in gcc-6.3.0-ppc/gcc/Makefile.in
---- gcc-4.6.3/libcpp/Makefile.in	2012-03-01 12:03:46.000000000 +0000
+--- gcc-6.3.0/gcc/Makefile.in	2016-11-22 17:33:07.000000000 +0000
-+++ gcc-4.6.3-ppc/libcpp/Makefile.in	2012-04-21 22:54:04.000000000 +0100
++++ gcc-6.3.0-ppc/gcc/Makefile.in	2017-01-05 02:42:41.988000000 +0000
-@@ -212,8 +212,7 @@
+@@ -1073,8 +1073,8 @@
+ # things like the go/%.o rule work properly; but we use $(*F) for the
+ # file part, as we just want the file part of the stem, not the entire
+ # file name.
+-COMPILE = $(COMPILE.base) -MT $@ -MMD -MP -MF $(@D)/$(DEPDIR)/$(*F).TPo
+-POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(*F).TPo $(@D)/$(DEPDIR)/$(*F).Po
++COMPILE = $(COMPILE.base)
++POSTCOMPILE =
+ else
+ COMPILE = source='$<' object='$@' libtool=no \
+     DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
+diff -NBaur gcc-6.3.0/libcpp/Makefile.in gcc-6.3.0-ppc/libcpp/Makefile.in
+--- gcc-6.3.0/libcpp/Makefile.in	2016-12-21 07:53:39.000000000 +0000
++++ gcc-6.3.0-ppc/libcpp/Makefile.in	2017-01-05 02:42:41.988000000 +0000
+@@ -208,8 +208,7 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
  # not atomically write the dependency output file.
@@ -235,3 +266,48 @@ diff -Nbaur gcc-4.6.3/libcpp/Makefile.in gcc-4.6.3-ppc/libcpp/Makefile.in
  else
  COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
  	  $(depcomp) $(COMPILE.base)
+diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S gcc-6.3.0-ppc/libgcc/config/rs6000/crtrestvr.S
+--- gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.3.0-ppc/libgcc/config/rs6000/crtrestvr.S	2017-01-05 02:42:41.988000000 +0000
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -85,3 +85,4 @@
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S gcc-6.3.0-ppc/libgcc/config/rs6000/crtsavevr.S
+--- gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.3.0-ppc/libgcc/config/rs6000/crtsavevr.S	2017-01-05 02:42:41.988000000 +0000
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -85,3 +85,4 @@
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff -NBaur gcc-6.3.0/libgcc/crtstuff.c gcc-6.3.0-ppc/libgcc/crtstuff.c
+--- gcc-6.3.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
++++ gcc-6.3.0-ppc/libgcc/crtstuff.c	2017-01-05 02:42:41.988000000 +0000
+@@ -47,6 +47,7 @@
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
++#define USED_FOR_TARGET
+ 
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,

dkppc/patches/gdb-7.11.patch

@@ -1,7 +1,7 @@
-diff -Nbaur gdb-7.4/gdb/Makefile.in gdb-7.4-ppc/gdb/Makefile.in
+diff -NBaur gdb-7.10/gdb/Makefile.in gdb-7.10-ppc/gdb/Makefile.in
---- gdb-7.4/gdb/Makefile.in	2012-01-06 04:43:01.000000000 +0000
+--- gdb-7.10/gdb/Makefile.in	2015-08-28 22:22:07.000000000 +0100
-+++ gdb-7.4-ppc/gdb/Makefile.in	2012-01-28 15:56:00.000000000 +0000
++++ gdb-7.10-ppc/gdb/Makefile.in	2015-11-09 09:21:13.228003995 +0000
-@@ -2195,10 +2195,10 @@
+@@ -2676,10 +2676,10 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
  # not atomically write the dependency output file.
@@ -16,15 +16,3 @@ diff -Nbaur gdb-7.4/gdb/Makefile.in gdb-7.4-ppc/gdb/Makefile.in
  @GMAKE_TRUE@else
  @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
  @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.4/sim/ppc/Makefile.in gdb-7.4-ppc/sim/ppc/Makefile.in
---- gdb-7.4/sim/ppc/Makefile.in	2009-09-16 00:26:44.000000000 +0100
-+++ gdb-7.4-ppc/sim/ppc/Makefile.in	2012-02-25 13:30:02.000000000 +0000
-@@ -551,7 +551,7 @@
- PACKAGE_OBJ = @sim_pk_obj@
- 
- 
--psim: $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(LIBS) $(LIBINTL_DEP)
-+psim: $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(LIBINTL_DEP)
- 	$(CC) $(CFLAGS) $(SIM_CFLAGS) $(LDFLAGS) -o psim$(EXEEXT) main.o $(TARGETLIB) $(BFD_LIB) $(LIBINTL) $(LIBIBERTY_LIB) $(LIBS)
- 
- run: psim

dkppc/rules/wiiu_rules

@@ -0,0 +1,12 @@
+ifeq ($(strip $(DEVKITPPC)),)
+$(error "Please set DEVKITPPC in your environment. export DEVKITPPC=<path to>devkitPro/devkitPPC)
+endif
+
+MACHDEP = -DESPRESSO -mwup -mcpu=750 -meabi -mhard-float
+
+include $(DEVKITPPC)/base_rules
+
+#---------------------------------------------------------------------------------
+%.elf:
+	@echo linking ... $(notdir $@)
+	@$(LD)  $^ $(LDFLAGS) $(LIBPATHS) $(LIBS) -o $@

dkppc/scripts/build-gcc.sh

@@ -16,7 +16,7 @@ then
 	--prefix=$prefix --target=$target --disable-nls --disable-shared --disable-debug \
 	--disable-werror \
 	--enable-poison-system-directories \
-	--enable-plugins --enable-lto --disable-dependency-tracking \
+	--enable-plugins --enable-lto \
 	--disable-werror $CROSS_PARAMS \
 	|| { echo "Error configuing ppc binutils"; exit 1; }
 	touch configured-binutils
@@ -45,9 +45,9 @@ cd mn10200/binutils
 
 if [ ! -f configured-binutils ]
 then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$MN_BINUTILS_VER/configure \
 	--prefix=$prefix --target=mn10200 --disable-nls --disable-debug \
-	--disable-dependency-tracking \
+	--disable-multilib \
 	--disable-werror $CROSS_PARAMS \
 	|| { echo "Error configuing mn10200 binutils"; exit 1; }
 	touch configured-binutils
@@ -75,19 +75,21 @@ cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
+	CFLAGS="$cflags" CXXFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" CXXFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
 	--enable-languages=c,c++,objc \
 	--enable-lto $plugin_ld \
 	--with-cpu=750 \
 	--disable-nls --disable-shared --enable-threads --disable-multilib \
 	--disable-win32-registry \
 	--disable-libstdcxx-pch \
+	--disable-libstdcxx-verbose \
+	--enable-cxx-flags='-ffunction-sections -fdata-sections' \
 	--target=$target \
 	--with-newlib \
 	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 	--prefix=$prefix\
-	--disable-dependency-tracking \
+	--with-system-zlib\
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 26" \
+	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 29" \
 	$CROSS_PARAMS \
 	|| { echo "Error configuring gcc stage 1"; exit 1; }
 	touch configured-gcc
@@ -170,7 +172,7 @@ cd $target/gdb
 if [ ! -f configured-gdb ]
 then
 	CFLAGS="$cflags" LDFLAGS="$ldflags" ../../gdb-$GDB_VER/configure \
-	--disable-nls --prefix=$prefix --target=$target --disable-werror --disable-dependency-tracking\
+	--disable-nls --prefix=$prefix --target=$target --disable-werror \
 	$CROSS_PARAMS || { echo "Error configuring gdb"; exit 1; }
 	touch configured-gdb
 fi

dkpsp/patches/gcc-4.6.3.patch

@@ -1,843 +0,0 @@
-diff -Nbaur gcc-4.6.3/config.sub gcc-4.6.3-psp/config.sub
---- gcc-4.6.3/config.sub	2010-05-25 14:22:07.000000000 +0100
-+++ gcc-4.6.3-psp/config.sub	2012-04-04 22:37:30.000000000 +0100
-@@ -279,6 +279,7 @@
- 	| mipsisa64sb1 | mipsisa64sb1el \
- 	| mipsisa64sr71k | mipsisa64sr71kel \
- 	| mipstx39 | mipstx39el \
-+	| mipsallegrex | mipsallegrexel \
- 	| mn10200 | mn10300 \
- 	| moxie \
- 	| mt \
-@@ -375,6 +376,7 @@
- 	| mipsisa64sb1-* | mipsisa64sb1el-* \
- 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
- 	| mipstx39-* | mipstx39el-* \
-+	| mipsallegrex-* | mipsallegrexel-* \
- 	| mmix-* \
- 	| mt-* \
- 	| msp430-* \
-@@ -771,6 +773,10 @@
- 		basic_machine=m68k-atari
- 		os=-mint
- 		;;
-+	psp)
-+		basic_machine=mipsallegrexel-psp
-+		os=-elf
-+		;;
- 	mips3*-*)
- 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- 		;;
-diff -Nbaur gcc-4.6.3/gcc/config/mips/allegrex.md gcc-4.6.3-psp/gcc/config/mips/allegrex.md
---- gcc-4.6.3/gcc/config/mips/allegrex.md	1970-01-01 01:00:00.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config/mips/allegrex.md	2012-04-04 22:37:30.000000000 +0100
-@@ -0,0 +1,191 @@
-+;; Sony ALLEGREX instructions.
-+;; Copyright (C) 2005 Free Software Foundation, Inc.
-+;;
-+;; This file is part of GCC.
-+;;
-+;; GCC is free software; you can redistribute it and/or modify
-+;; it under the terms of the GNU General Public License as published by
-+;; the Free Software Foundation; either version 2, or (at your option)
-+;; any later version.
-+;;
-+;; GCC is distributed in the hope that it will be useful,
-+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+;; GNU General Public License for more details.
-+;;
-+;; You should have received a copy of the GNU General Public License
-+;; along with GCC; see the file COPYING.  If not, write to
-+;; the Free Software Foundation, 59 Temple Place - Suite 330,
-+;; Boston, MA 02111-1307, USA.
-+
-+(define_c_enum "unspec" [
-+  UNSPEC_WSBH
-+  UNSPEC_CLO
-+  UNSPEC_CTO
-+  UNSPEC_CACHE
-+  UNSPEC_CEIL_W_S
-+  UNSPEC_FLOOR_W_S
-+  UNSPEC_ROUND_W_S
-+])
-+
-+;; Multiply Add and Subtract.
-+;; Note: removed clobbering for madd and msub (testing needed)
-+
-+(define_insn "allegrex_madd"
-+  [(set (match_operand:SI 0 "register_operand" "+l")
-+       (plus:SI (mult:SI (match_operand:SI 1 "register_operand" "d")
-+             (match_operand:SI 2 "register_operand" "d"))
-+        (match_dup 0)))]
-+  "TARGET_ALLEGREX"
-+  "madd\t%1,%2"
-+  [(set_attr "type"    "imadd")
-+   (set_attr "mode"    "SI")])
-+
-+(define_insn "allegrex_msub"
-+  [(set (match_operand:SI 0 "register_operand" "+l")
-+       (minus:SI (match_dup 0)
-+         (mult:SI (match_operand:SI 1 "register_operand" "d")
-+              (match_operand:SI 2 "register_operand" "d"))))]
-+  "TARGET_ALLEGREX"
-+  "msub\t%1,%2"
-+  [(set_attr "type"    "imadd")
-+   (set_attr "mode"    "SI")])
-+
-+
-+;; Min and max.
-+
-+(define_insn "sminsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+        (smin:SI (match_operand:SI 1 "register_operand" "d")
-+                 (match_operand:SI 2 "register_operand" "d")))]
-+  "TARGET_ALLEGREX"
-+  "min\t%0,%1,%2"
-+  [(set_attr "type"    "arith")
-+   (set_attr "mode"    "SI")])
-+
-+(define_insn "smaxsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+        (smax:SI (match_operand:SI 1 "register_operand" "d")
-+                 (match_operand:SI 2 "register_operand" "d")))]
-+  "TARGET_ALLEGREX"
-+  "max\t%0,%1,%2"
-+  [(set_attr "type"    "arith")
-+   (set_attr "mode"    "SI")])
-+
-+
-+;; Extended shift instructions.
-+
-+(define_insn "allegrex_bitrev"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+   (unspec:SI [(match_operand:SI 1 "register_operand" "d")]
-+          UNSPEC_BITREV))]
-+  "TARGET_ALLEGREX"
-+  "bitrev\t%0,%1"
-+  [(set_attr "type"    "arith")
-+   (set_attr "mode"    "SI")])
-+
-+(define_insn "allegrex_wsbh"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+   (unspec:SI [(match_operand:SI 1 "register_operand" "d")]
-+          UNSPEC_WSBH))]
-+  "TARGET_ALLEGREX"
-+  "wsbh\t%0,%1"
-+  [(set_attr "type"    "arith")
-+   (set_attr "mode"    "SI")])
-+
-+(define_insn "bswapsi2"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+   (bswap:SI (match_operand:SI 1 "register_operand" "d")))]
-+  "TARGET_ALLEGREX"
-+  "wsbw\t%0,%1"
-+  [(set_attr "type"    "shift")
-+   (set_attr "mode"    "SI")])
-+
-+
-+;; Count leading ones, count trailing zeros, and count trailing ones (clz is
-+;; already defined).
-+
-+(define_insn "allegrex_clo"
-+  [(set (match_operand:SI 0 "register_operand" "=d")
-+       (unspec:SI [(match_operand:SI 1 "register_operand" "d")]
-+          UNSPEC_CLO))]
-+  "TARGET_ALLEGREX"
-+  "clo\t%0,%1"
-+  [(set_attr "type"    "clz")
-+   (set_attr "mode"    "SI")])
-+
-+(define_expand "ctzsi2"
-+  [(set (match_operand:SI 0 "register_operand")
-+       (ctz:SI (match_operand:SI 1 "register_operand")))]
-+  "TARGET_ALLEGREX"
-+{
-+  rtx r1;
-+
-+  r1 = gen_reg_rtx (SImode);
-+  emit_insn (gen_allegrex_bitrev (r1, operands[1]));
-+  emit_insn (gen_clzsi2 (operands[0], r1));
-+  DONE;
-+})
-+
-+(define_expand "allegrex_cto"
-+  [(set (match_operand:SI 0 "register_operand")
-+       (unspec:SI [(match_operand:SI 1 "register_operand")]
-+          UNSPEC_CTO))]
-+  "TARGET_ALLEGREX"
-+{
-+  rtx r1;
-+
-+  r1 = gen_reg_rtx (SImode);
-+  emit_insn (gen_allegrex_bitrev (r1, operands[1]));
-+  emit_insn (gen_allegrex_clo (operands[0], r1));
-+  DONE;
-+})
-+
-+
-+;; Misc.
-+
-+(define_insn "allegrex_sync"
-+  [(unspec_volatile [(const_int 0)] UNSPEC_SYNC)]
-+  "TARGET_ALLEGREX"
-+  "sync"
-+  [(set_attr "type"    "unknown")
-+   (set_attr "mode"    "none")])
-+
-+(define_insn "allegrex_cache"
-+  [(unspec_volatile [(match_operand:SI 0 "const_int_operand" "")
-+            (match_operand:SI 1 "register_operand" "d")]
-+           UNSPEC_CACHE)]
-+  "TARGET_ALLEGREX"
-+  "cache\t%0,0(%1)"
-+  [(set_attr "type"    "unknown")
-+   (set_attr "mode"    "none")])
-+
-+
-+;; Floating-point builtins.
-+
-+(define_insn "allegrex_ceil_w_s"
-+  [(set (match_operand:SI 0 "register_operand" "=f")
-+       (unspec:SI [(match_operand:SF 1 "register_operand" "f")]
-+          UNSPEC_CEIL_W_S))]
-+  "TARGET_ALLEGREX"
-+  "ceil.w.s\t%0,%1"
-+  [(set_attr "type"    "fcvt")
-+   (set_attr "mode"    "SF")])
-+
-+(define_insn "allegrex_floor_w_s"
-+  [(set (match_operand:SI 0 "register_operand" "=f")
-+       (unspec:SI [(match_operand:SF 1 "register_operand" "f")]
-+          UNSPEC_FLOOR_W_S))]
-+  "TARGET_ALLEGREX"
-+  "floor.w.s\t%0,%1"
-+  [(set_attr "type"    "fcvt")
-+   (set_attr "mode"    "SF")])
-+
-+(define_insn "allegrex_round_w_s"
-+  [(set (match_operand:SI 0 "register_operand" "=f")
-+       (unspec:SI [(match_operand:SF 1 "register_operand" "f")]
-+          UNSPEC_ROUND_W_S))]
-+  "TARGET_ALLEGREX"
-+  "round.w.s\t%0,%1"
-+  [(set_attr "type"    "fcvt")
-+   (set_attr "mode"    "SF")])
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips-ftypes.def gcc-4.6.3-psp/gcc/config/mips/mips-ftypes.def
---- gcc-4.6.3/gcc/config/mips/mips-ftypes.def	2009-02-20 15:20:38.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/config/mips/mips-ftypes.def	2012-04-04 22:37:31.000000000 +0100
-@@ -53,9 +53,12 @@
- 
- DEF_MIPS_FTYPE (2, (SI, DI, SI))
- DEF_MIPS_FTYPE (2, (SI, POINTER, SI))
-+DEF_MIPS_FTYPE (1, (SI, HI))
-+DEF_MIPS_FTYPE (1, (SI, SF))
- DEF_MIPS_FTYPE (1, (SI, SI))
- DEF_MIPS_FTYPE (2, (SI, SI, SI))
- DEF_MIPS_FTYPE (3, (SI, SI, SI, SI))
-+DEF_MIPS_FTYPE (1, (SI, QI))
- DEF_MIPS_FTYPE (1, (SI, V2HI))
- DEF_MIPS_FTYPE (2, (SI, V2HI, V2HI))
- DEF_MIPS_FTYPE (1, (SI, V4QI))
-@@ -124,3 +127,4 @@
- DEF_MIPS_FTYPE (2, (VOID, SI, SI))
- DEF_MIPS_FTYPE (2, (VOID, V2HI, V2HI))
- DEF_MIPS_FTYPE (2, (VOID, V4QI, V4QI))
-+DEF_MIPS_FTYPE (1, (VOID, VOID))
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips.c gcc-4.6.3-psp/gcc/config/mips/mips.c
---- gcc-4.6.3/gcc/config/mips/mips.c	2011-05-29 18:48:14.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config/mips/mips.c	2012-04-04 22:37:31.000000000 +0100
-@@ -239,7 +239,12 @@
-   MIPS_BUILTIN_CMP_SINGLE,
- 
-   /* For generating bposge32 branch instructions in MIPS32 DSP ASE.  */
--  MIPS_BUILTIN_BPOSGE32
-+  MIPS_BUILTIN_BPOSGE32,
-+
-+  /* The builtin corresponds to the ALLEGREX cache instruction.  Operand 0
-+     is the function code (must be less than 32) and operand 1 is the base
-+     address.  */
-+  MIPS_BUILTIN_CACHE
- };
- 
- /* Invoke MACRO (COND) for each C.cond.fmt condition.  */
-@@ -516,6 +521,10 @@
-    normal branch.  */
- static bool mips_branch_likely;
- 
-+/* Preferred stack boundary for proper stack vars alignment */
-+unsigned int mips_preferred_stack_boundary;
-+unsigned int mips_preferred_stack_align;
-+
- /* The current instruction-set architecture.  */
- enum processor mips_arch;
- const struct mips_cpu_info *mips_arch_info;
-@@ -691,6 +700,7 @@
- 
-   /* MIPS II processors.  */
-   { "r6000", PROCESSOR_R6000, 2, 0 },
-+  { "allegrex", PROCESSOR_ALLEGREX, 2, 0 },
- 
-   /* MIPS III processors.  */
-   { "r4000", PROCESSOR_R4000, 3, 0 },
-@@ -969,6 +979,9 @@
- 		     1,           /* branch_cost */
- 		     4            /* memory_latency */
-   },
-+  { /* Allegrex */
-+    DEFAULT_COSTS
-+  },
-   { /* Loongson-2E */
-     DEFAULT_COSTS
-   },
-@@ -12605,6 +12618,7 @@
- AVAIL_NON_MIPS16 (dspr2_32, !TARGET_64BIT && TARGET_DSPR2)
- AVAIL_NON_MIPS16 (loongson, TARGET_LOONGSON_VECTORS)
- AVAIL_NON_MIPS16 (cache, TARGET_CACHE_BUILTIN)
-+AVAIL_NON_MIPS16 (allegrex, TARGET_ALLEGREX)
- 
- /* Construct a mips_builtin_description from the given arguments.
- 
-@@ -12701,6 +12715,30 @@
-   MIPS_BUILTIN (bposge, f, "bposge" #VALUE,				\
- 		MIPS_BUILTIN_BPOSGE ## VALUE, MIPS_SI_FTYPE_VOID, AVAIL)
- 
-+/* Define a MIPS_BUILTIN_DIRECT function for instruction CODE_FOR_allegrex_<INSN>.
-+   FUNCTION_TYPE and TARGET_FLAGS are builtin_description fields.  */
-+#define DIRECT_ALLEGREX_BUILTIN(INSN, FUNCTION_TYPE, TARGET_FLAGS) \
-+  { CODE_FOR_allegrex_ ## INSN, MIPS_FP_COND_f, "__builtin_allegrex_" #INSN,        \
-+    MIPS_BUILTIN_DIRECT, FUNCTION_TYPE, mips_builtin_avail_allegrex }
-+
-+/* Same as the above, but mapped to an instruction that doesn't share the
-+   NAME.  NAME is the name of the builtin without the builtin prefix.  */
-+#define DIRECT_ALLEGREX_NAMED_BUILTIN(NAME, INSN, FUNCTION_TYPE, TARGET_FLAGS) \
-+  { CODE_FOR_ ## INSN, MIPS_FP_COND_f, "__builtin_allegrex_" #NAME,             \
-+    MIPS_BUILTIN_DIRECT, FUNCTION_TYPE, mips_builtin_avail_allegrex }
-+
-+/* Define a MIPS_BUILTIN_DIRECT_NO_TARGET function for instruction
-+   CODE_FOR_allegrex_<INSN>.  FUNCTION_TYPE and TARGET_FLAGS are
-+   builtin_description fields.  */
-+#define DIRECT_ALLEGREX_NO_TARGET_BUILTIN(INSN, FUNCTION_TYPE, TARGET_FLAGS)   \
-+  { CODE_FOR_allegrex_ ## INSN, MIPS_FP_COND_f, "__builtin_allegrex_" #INSN,            \
-+    MIPS_BUILTIN_DIRECT_NO_TARGET, FUNCTION_TYPE, mips_builtin_avail_allegrex }
-+
-+/* Define a builtin with a specific function TYPE.  */
-+#define SPECIAL_ALLEGREX_BUILTIN(TYPE, INSN, FUNCTION_TYPE, TARGET_FLAGS)  \
-+  { CODE_FOR_allegrex_ ## INSN, MIPS_FP_COND_f, "__builtin_allegrex_" #INSN,            \
-+    MIPS_BUILTIN_ ## TYPE, FUNCTION_TYPE, mips_builtin_avail_allegrex }
-+
- /* Define a Loongson MIPS_BUILTIN_DIRECT function __builtin_loongson_<FN_NAME>
-    for instruction CODE_FOR_loongson_<INSN>.  FUNCTION_TYPE is a
-    builtin_description field.  */
-@@ -12945,6 +12983,40 @@
-   DIRECT_BUILTIN (dpsqx_s_w_ph, MIPS_DI_FTYPE_DI_V2HI_V2HI, dspr2_32),
-   DIRECT_BUILTIN (dpsqx_sa_w_ph, MIPS_DI_FTYPE_DI_V2HI_V2HI, dspr2_32),
- 
-+/* Builtin functions for the Sony ALLEGREX processor.
-+
-+   These have the `__builtin_allegrex_' prefix instead of `__builtin_mips_'
-+   to maintain compatibility with Sony's ALLEGREX GCC port.
-+
-+   Some of the builtins may seem redundant, but they are the same as the
-+   builtins defined in the Sony compiler.  I chose to map redundant and
-+   trivial builtins to the original instruction instead of creating
-+   duplicate patterns specifically for the ALLEGREX (as Sony does).  */
-+
-+  DIRECT_ALLEGREX_BUILTIN(bitrev, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_BUILTIN(wsbh, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(wsbw, bswapsi2, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(clz, clzsi2, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_BUILTIN(clo, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(ctz, ctzsi2, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_BUILTIN(cto, MIPS_SI_FTYPE_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(rotr, rotrsi3, MIPS_SI_FTYPE_SI_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(rotl, rotlsi3, MIPS_SI_FTYPE_SI_SI, 0),
-+
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(seb, extendqisi2, MIPS_SI_FTYPE_QI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(seh, extendhisi2, MIPS_SI_FTYPE_HI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(max, smaxsi3, MIPS_SI_FTYPE_SI_SI, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(min, sminsi3, MIPS_SI_FTYPE_SI_SI, 0),
-+
-+  DIRECT_ALLEGREX_NO_TARGET_BUILTIN(sync, MIPS_VOID_FTYPE_VOID, 0),
-+  SPECIAL_ALLEGREX_BUILTIN(CACHE, cache, MIPS_VOID_FTYPE_SI_SI, 0),
-+
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(sqrt_s, sqrtsf2, MIPS_SF_FTYPE_SF, 0),
-+  DIRECT_ALLEGREX_BUILTIN(ceil_w_s, MIPS_SI_FTYPE_SF, 0),
-+  DIRECT_ALLEGREX_BUILTIN(floor_w_s, MIPS_SI_FTYPE_SF, 0),
-+  DIRECT_ALLEGREX_BUILTIN(round_w_s, MIPS_SI_FTYPE_SF, 0),
-+  DIRECT_ALLEGREX_NAMED_BUILTIN(trunc_w_s, fix_truncsfsi2_insn, MIPS_SI_FTYPE_SF, 0),
-+
-   /* Builtin functions for ST Microelectronics Loongson-2E/2F cores.  */
-   LOONGSON_BUILTIN (packsswh, MIPS_V4HI_FTYPE_V2SI_V2SI),
-   LOONGSON_BUILTIN (packsshb, MIPS_V8QI_FTYPE_V4HI_V4HI),
-@@ -13096,6 +13168,8 @@
- /* Standard mode-based argument types.  */
- #define MIPS_ATYPE_UQI unsigned_intQI_type_node
- #define MIPS_ATYPE_SI intSI_type_node
-+#define MIPS_ATYPE_HI intHI_type_node
-+#define MIPS_ATYPE_QI intQI_type_node
- #define MIPS_ATYPE_USI unsigned_intSI_type_node
- #define MIPS_ATYPE_DI intDI_type_node
- #define MIPS_ATYPE_UDI unsigned_intDI_type_node
-@@ -13270,6 +13344,9 @@
- 
-   switch (opno)
-     {
-+    case 0:
-+      emit_insn (GEN_FCN (icode) (0));
-+      break;
-     case 2:
-       emit_insn (GEN_FCN (icode) (ops[0], ops[1]));
-       break;
-@@ -13439,6 +13516,28 @@
- 				       const1_rtx, const0_rtx);
- }
- 
-+/* Expand a __builtin_allegrex_cache() function.  Make sure the passed
-+   cache function code is less than 32.  */
-+
-+static rtx
-+mips_expand_builtin_cache (enum insn_code icode, rtx target, tree exp)
-+{
-+  rtx op0, op1;
-+
-+  op0 = mips_prepare_builtin_arg (icode, 0, exp, 0);
-+  op1 = mips_prepare_builtin_arg (icode, 1, exp, 1);
-+
-+  if (GET_CODE (op0) == CONST_INT)
-+    if (INTVAL (op0) < 0 || INTVAL (op0) > 0x1f)
-+      {
-+   error ("invalid function code '%d'", INTVAL (op0));
-+   return const0_rtx;
-+      }
-+
-+  emit_insn (GEN_FCN (icode) (op0, op1));
-+  return target;
-+}
-+
- /* Implement TARGET_EXPAND_BUILTIN.  */
- 
- static rtx
-@@ -13484,6 +13583,9 @@
- 
-     case MIPS_BUILTIN_BPOSGE32:
-       return mips_expand_builtin_bposge (d->builtin_type, target);
-+
-+    case MIPS_BUILTIN_CACHE:
-+      return mips_expand_builtin_cache (d->icode, target, exp);
-     }
-   gcc_unreachable ();
- }
-@@ -15918,6 +16020,22 @@
-      Do all CPP-sensitive stuff in non-MIPS16 mode; we'll switch to
-      MIPS16 mode afterwards if need be.  */
-   mips_set_mips16_mode (false);
-+
-+  /* Validate -mpreferred-stack-boundary= value, or provide default.
-+     The default of 128-bit is for newABI else 64-bit.  */
-+  mips_preferred_stack_boundary = (TARGET_NEWABI ? 128 : 64);
-+  mips_preferred_stack_align = (TARGET_NEWABI ? 16 : 8);
-+  if (mips_preferred_stack_boundary_string)
-+    {
-+      i = atoi (mips_preferred_stack_boundary_string);
-+      if (i < 2 || i > 12)
-+       error ("-mpreferred-stack-boundary=%d is not between 2 and 12", i);
-+      else
-+        {
-+          mips_preferred_stack_align = (1 << i);
-+          mips_preferred_stack_boundary = mips_preferred_stack_align * 8;
-+        }
-+    }
- }
- 
- /* Implement TARGET_OPTION_OPTIMIZATION_TABLE.  */
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips.h gcc-4.6.3-psp/gcc/config/mips/mips.h
---- gcc-4.6.3/gcc/config/mips/mips.h	2011-03-08 20:51:11.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/config/mips/mips.h	2012-04-04 22:37:31.000000000 +0100
-@@ -231,6 +231,7 @@
- #define TARGET_SB1                  (mips_arch == PROCESSOR_SB1		\
- 				     || mips_arch == PROCESSOR_SB1A)
- #define TARGET_SR71K                (mips_arch == PROCESSOR_SR71000)
-+#define TARGET_ALLEGREX             (mips_arch == PROCESSOR_ALLEGREX)
- 
- /* Scheduling target defines.  */
- #define TUNE_20KC		    (mips_tune == PROCESSOR_20KC)
-@@ -258,6 +259,7 @@
- #define TUNE_OCTEON		    (mips_tune == PROCESSOR_OCTEON)
- #define TUNE_SB1                    (mips_tune == PROCESSOR_SB1		\
- 				     || mips_tune == PROCESSOR_SB1A)
-+#define TUNE_ALLEGREX               (mips_tune == PROCESSOR_ALLEGREX)
- 
- /* Whether vector modes and intrinsics for ST Microelectronics
-    Loongson-2E/2F processors should be enabled.  In o32 pairs of
-@@ -852,6 +854,9 @@
- /* ISA has LDC1 and SDC1.  */
- #define ISA_HAS_LDC1_SDC1	(!ISA_MIPS1 && !TARGET_MIPS16)
- 
-+/* ISA has just the integer condition move instructions (movn,movz) */
-+#define ISA_HAS_INT_CONDMOVE   (TARGET_ALLEGREX)
-+
- /* ISA has the mips4 FP condition code instructions: FP-compare to CC,
-    branch on CC, and move (both FP and non-FP) on CC.  */
- #define ISA_HAS_8CC		(ISA_MIPS4				\
-@@ -874,6 +879,7 @@
- 
- /* ISA has conditional trap instructions.  */
- #define ISA_HAS_COND_TRAP	(!ISA_MIPS1				\
-+				 && !TARGET_ALLEGREX				\
- 				 && !TARGET_MIPS16)
- 
- /* ISA has integer multiply-accumulate instructions, madd and msub.  */
-@@ -910,6 +916,7 @@
- /* ISA has count leading zeroes/ones instruction (not implemented).  */
- #define ISA_HAS_CLZ_CLO		((ISA_MIPS32				\
- 				  || ISA_MIPS32R2			\
-+				  || TARGET_ALLEGREX		\
- 				  || ISA_MIPS64				\
- 				  || ISA_MIPS64R2)			\
- 				 && !TARGET_MIPS16)
-@@ -955,6 +962,7 @@
- 				  || TARGET_MIPS5400			\
- 				  || TARGET_MIPS5500			\
- 				  || TARGET_SR71K			\
-+				  || TARGET_ALLEGREX			\
- 				  || TARGET_SMARTMIPS)			\
- 				 && !TARGET_MIPS16)
- 
-@@ -984,11 +992,13 @@
- 
- /* ISA includes the MIPS32r2 seb and seh instructions.  */
- #define ISA_HAS_SEB_SEH		((ISA_MIPS32R2		\
-+				  || TARGET_ALLEGREX	\
- 				  || ISA_MIPS64R2)	\
- 				 && !TARGET_MIPS16)
- 
- /* ISA includes the MIPS32/64 rev 2 ext and ins instructions.  */
- #define ISA_HAS_EXT_INS		((ISA_MIPS32R2		\
-+				  || TARGET_ALLEGREX	\
- 				  || ISA_MIPS64R2)	\
- 				 && !TARGET_MIPS16)
- 
-@@ -1038,7 +1048,8 @@
- 				 || ISA_MIPS64				\
- 				 || ISA_MIPS64R2			\
- 				 || TARGET_MIPS5500			\
--				 || TARGET_LOONGSON_2EF)
-+				 || TARGET_LOONGSON_2EF		\
-+				 || TARGET_ALLEGREX)
- 
- /* ISA includes synci, jr.hb and jalr.hb.  */
- #define ISA_HAS_SYNCI ((ISA_MIPS32R2		\
-@@ -2133,7 +2144,7 @@
-    `crtl->outgoing_args_size'.  */
- #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1
- 
--#define STACK_BOUNDARY (TARGET_NEWABI ? 128 : 64)
-+#define STACK_BOUNDARY (mips_preferred_stack_boundary)
- 
- /* Symbolic macros for the registers used to return integer and floating
-    point values.  */
-@@ -2259,7 +2270,7 @@
- /* Treat LOC as a byte offset from the stack pointer and round it up
-    to the next fully-aligned offset.  */
- #define MIPS_STACK_ALIGN(LOC) \
--  (TARGET_NEWABI ? ((LOC) + 15) & -16 : ((LOC) + 7) & -8)
-+  (((LOC) + (mips_preferred_stack_align - 1)) & -(mips_preferred_stack_align))
- 
- 
- /* Output assembler code to FILE to increment profiler label # LABELNO
-@@ -2911,6 +2922,9 @@
- #endif
- #endif
- 
-+extern unsigned int mips_preferred_stack_boundary;
-+extern unsigned int mips_preferred_stack_align;
-+
- #ifndef HAVE_AS_TLS
- #define HAVE_AS_TLS 0
- #endif
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips.md gcc-4.6.3-psp/gcc/config/mips/mips.md
---- gcc-4.6.3/gcc/config/mips/mips.md	2012-01-09 22:09:53.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/config/mips/mips.md	2012-04-04 22:37:31.000000000 +0100
-@@ -37,6 +37,7 @@
-   74kf2_1
-   74kf1_1
-   74kf3_2
-+  allegrex
-   loongson_2e
-   loongson_2f
-   loongson_3a
-@@ -598,7 +599,7 @@
- ;; This mode iterator allows :MOVECC to be used anywhere that a
- ;; conditional-move-type condition is needed.
- (define_mode_iterator MOVECC [SI (DI "TARGET_64BIT")
--                              (CC "TARGET_HARD_FLOAT && !TARGET_LOONGSON_2EF")])
-+                              (CC "TARGET_HARD_FLOAT && !TARGET_LOONGSON_2EF && !TARGET_ALLEGREX")])
- 
- ;; 32-bit integer moves for which we provide move patterns.
- (define_mode_iterator IMOVE32
-@@ -1885,11 +1886,11 @@
- 	   (mult:DI
- 	      (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
- 	      (any_extend:DI (match_operand:SI 2 "register_operand" "d")))))]
--  "!TARGET_64BIT && (ISA_HAS_MSAC || GENERATE_MADD_MSUB || ISA_HAS_DSP)"
-+  "!TARGET_64BIT && (ISA_HAS_MSAC || GENERATE_MADD_MSUB || ISA_HAS_DSP || TARGET_ALLEGREX)"
- {
-   if (ISA_HAS_DSP_MULT)
-     return "msub<u>\t%q0,%1,%2";
--  else if (TARGET_MIPS5500 || GENERATE_MADD_MSUB)
-+  else if (TARGET_MIPS5500 || GENERATE_MADD_MSUB || TARGET_ALLEGREX)
-     return "msub<u>\t%1,%2";
-   else
-     return "msac<u>\t$0,%1,%2";
-@@ -2066,14 +2067,14 @@
- 	 (mult:DI (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
- 		  (any_extend:DI (match_operand:SI 2 "register_operand" "d")))
- 	 (match_operand:DI 3 "register_operand" "0")))]
--  "(TARGET_MAD || ISA_HAS_MACC || GENERATE_MADD_MSUB || ISA_HAS_DSP)
-+  "(TARGET_MAD || ISA_HAS_MACC || GENERATE_MADD_MSUB || ISA_HAS_DSP || TARGET_ALLEGREX)
-    && !TARGET_64BIT"
- {
-   if (TARGET_MAD)
-     return "mad<u>\t%1,%2";
-   else if (ISA_HAS_DSP_MULT)
-     return "madd<u>\t%q0,%1,%2";
--  else if (GENERATE_MADD_MSUB || TARGET_MIPS5500)
-+  else if (GENERATE_MADD_MSUB || TARGET_MIPS5500 || TARGET_ALLEGREX)
-     return "madd<u>\t%1,%2";
-   else
-     /* See comment in *macc.  */
-@@ -2500,6 +2501,33 @@
- ;;
- ;;  ....................
- ;;
-+;; FIND FIRST BIT INSTRUCTION
-+;;
-+;;  ....................
-+;;
-+
-+(define_expand "ffs<mode>2"
-+  [(set (match_operand:GPR 0 "register_operand" "")
-+   (ffs:GPR (match_operand:GPR 1 "register_operand" "")))]
-+  "ISA_HAS_CLZ_CLO"
-+{
-+  rtx r1, r2, r3, r4;
-+  
-+  r1 = gen_reg_rtx (<MODE>mode);
-+  r2 = gen_reg_rtx (<MODE>mode);
-+  r3 = gen_reg_rtx (<MODE>mode);
-+  r4 = gen_reg_rtx (<MODE>mode);
-+  emit_insn (gen_neg<mode>2 (r1, operands[1]));
-+  emit_insn (gen_and<mode>3 (r2, operands[1], r1));
-+  emit_insn (gen_clz<mode>2 (r3, r2));
-+  emit_move_insn (r4, GEN_INT (GET_MODE_BITSIZE (<MODE>mode)));
-+  emit_insn (gen_sub<mode>3 (operands[0], r4, r3));
-+  DONE;
-+})
-+
-+;;
-+;;  ....................
-+;;
- ;;	NEGATION and ONE'S COMPLEMENT
- ;;
- ;;  ....................
-@@ -2550,6 +2578,25 @@
-   [(set_attr "alu_type" "not")
-    (set_attr "mode" "<MODE>")])
- 
-+(define_expand "rotl<mode>3"
-+  [(set (match_operand:GPR 0 "register_operand")
-+       (rotate:GPR (match_operand:GPR 1 "register_operand")
-+           (match_operand:SI 2 "arith_operand")))]
-+  "ISA_HAS_ROR"
-+{
-+  rtx temp;
-+
-+  if (GET_CODE (operands[2]) == CONST_INT)
-+    temp = GEN_INT (GET_MODE_BITSIZE (<MODE>mode) - INTVAL (operands[2]));
-+  else
-+    {
-+      temp = gen_reg_rtx (<MODE>mode);
-+      emit_insn (gen_neg<mode>2 (temp, operands[2]));
-+    }
-+  emit_insn (gen_rotr<mode>3 (operands[0], operands[1], temp));
-+  DONE;
-+})
-+
- ;;
- ;;  ....................
- ;;
-@@ -6301,7 +6348,7 @@
- 		 (const_int 0)])
- 	 (match_operand:GPR 2 "reg_or_0_operand" "dJ,0")
- 	 (match_operand:GPR 3 "reg_or_0_operand" "0,dJ")))]
--  "ISA_HAS_CONDMOVE"
-+  "ISA_HAS_CONDMOVE || ISA_HAS_INT_CONDMOVE"
-   "@
-     mov%T4\t%0,%z2,%1
-     mov%t4\t%0,%z3,%1"
-@@ -6331,8 +6378,12 @@
- 	(if_then_else:GPR (match_dup 5)
- 			  (match_operand:GPR 2 "reg_or_0_operand")
- 			  (match_operand:GPR 3 "reg_or_0_operand")))]
--  "ISA_HAS_CONDMOVE"
-+  "ISA_HAS_CONDMOVE || ISA_HAS_INT_CONDMOVE"
- {
-+  if (ISA_HAS_INT_CONDMOVE
-+      && GET_MODE_CLASS (GET_MODE (operands[0])) == MODE_FLOAT)
-+    FAIL;
-+
-   mips_expand_conditional_move (operands);
-   DONE;
- })
-@@ -6481,6 +6532,9 @@
- ; ST-Microelectronics Loongson-2E/2F-specific patterns.
- (include "loongson.md")
- 
-+; Sony ALLEGREX instructions.
-+(include "allegrex.md")
-+
- (define_c_enum "unspec" [
-   UNSPEC_ADDRESS_FIRST
- ])
-diff -Nbaur gcc-4.6.3/gcc/config/mips/mips.opt gcc-4.6.3-psp/gcc/config/mips/mips.opt
---- gcc-4.6.3/gcc/config/mips/mips.opt	2011-02-17 01:59:04.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/config/mips/mips.opt	2012-04-04 22:37:31.000000000 +0100
-@@ -306,5 +306,9 @@
- Target Report Var(TARGET_XGOT)
- Lift restrictions on GOT size
- 
-+mpreferred-stack-boundary=
-+Target RejectNegative Joined Var(mips_preferred_stack_boundary_string)
-+Attempt to keep stack aligned to this power of 2
-+
- noasmopt
- Driver
-diff -Nbaur gcc-4.6.3/gcc/config/mips/psp.h gcc-4.6.3-psp/gcc/config/mips/psp.h
---- gcc-4.6.3/gcc/config/mips/psp.h	1970-01-01 01:00:00.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config/mips/psp.h	2012-04-04 22:37:31.000000000 +0100
-@@ -0,0 +1,31 @@
-+/* Support for Sony's Playstation Portable (PSP).
-+   Copyright (C) 2005 Free Software Foundation, Inc.
-+   Contributed by Marcus R. Brown <mrbrown@ocgnet.org>
-+
-+This file is part of GCC.
-+
-+GCC is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+GCC is distributed in the hope that it will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with GCC; see the file COPYING.  If not, write to
-+the Free Software Foundation, 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA.  */
-+
-+/* Override the startfile spec to include crt0.o. */
-+#undef STARTFILE_SPEC
-+#define STARTFILE_SPEC "crt0%O%s crti%O%s crtbegin%O%s"
-+
-+#undef SUBTARGET_CPP_SPEC
-+#define SUBTARGET_CPP_SPEC "-DPSP=1 -D__psp__=1 -D_PSP=1"
-+
-+/* Get rid of the .pdr section. */
-+#undef SUBTARGET_ASM_SPEC
-+#define SUBTARGET_ASM_SPEC "-mno-pdr"
-diff -Nbaur gcc-4.6.3/gcc/config/mips/t-allegrex gcc-4.6.3-psp/gcc/config/mips/t-allegrex
---- gcc-4.6.3/gcc/config/mips/t-allegrex	1970-01-01 01:00:00.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config/mips/t-allegrex	2012-04-04 22:37:31.000000000 +0100
-@@ -0,0 +1,29 @@
-+# Suppress building libgcc1.a, since the MIPS compiler port is complete
-+# and does not need anything from libgcc1.a.
-+LIBGCC1 =
-+CROSS_LIBGCC1 =
-+
-+EXTRA_MULTILIB_PARTS = crtbegin.o crtend.o crti.o crtn.o
-+# Don't let CTOR_LIST end up in sdata section.
-+CRTSTUFF_T_CFLAGS = -G 0
-+
-+# Assemble startup files.
-+$(T)crti.o: $(srcdir)/config/mips/crti.asm $(GCC_PASSES)
-+	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(MULTILIB_CFLAGS) $(INCLUDES) \
-+	-c -o $(T)crti.o -x assembler-with-cpp $(srcdir)/config/mips/crti.asm
-+
-+$(T)crtn.o: $(srcdir)/config/mips/crtn.asm $(GCC_PASSES)
-+	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(MULTILIB_CFLAGS) $(INCLUDES) \
-+	-c -o $(T)crtn.o -x assembler-with-cpp $(srcdir)/config/mips/crtn.asm
-+
-+# We must build libgcc2.a with -G 0, in case the user wants to link
-+# without the $gp register.
-+TARGET_LIBGCC2_CFLAGS = -G 0
-+
-+# Build the libraries for both hard and soft floating point
-+
-+MULTILIB_OPTIONS = 
-+MULTILIB_DIRNAMES = 
-+
-+LIBGCC = stmp-multilib
-+INSTALL_LIBGCC = install-multilib
-diff -Nbaur gcc-4.6.3/gcc/config.gcc gcc-4.6.3-psp/gcc/config.gcc
---- gcc-4.6.3/gcc/config.gcc	2011-07-22 17:44:50.000000000 +0100
-+++ gcc-4.6.3-psp/gcc/config.gcc	2012-04-04 22:37:31.000000000 +0100
-@@ -2033,6 +2033,18 @@
- 	tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
- 	tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
- 	;;
-+mipsallegrex-*-elf* | mipsallegrexel-*-elf*)
-+   tm_file="elfos.h ${tm_file} mips/elf.h"
-+   tmake_file=mips/t-allegrex
-+   target_cpu_default="MASK_SINGLE_FLOAT|MASK_DIVIDE_BREAKS"
-+   tm_defines="MIPS_ISA_DEFAULT=2 MIPS_CPU_STRING_DEFAULT=\\\"allegrex\\\" MIPS_ABI_DEFAULT=ABI_EABI"
-+   case ${target} in
-+   mipsallegrex*-psp-elf*) 
-+       tm_file="${tm_file} mips/psp.h"
-+       ;;
-+   esac
-+   use_fixproto=yes
-+   ;;
- mmix-knuth-mmixware)
- 	tm_file="${tm_file} newlib-stdint.h"
- 	need_64bit_hwint=yes
-diff -Nbaur gcc-4.6.3/gcc/crtstuff.c gcc-4.6.3-psp/gcc/crtstuff.c
---- gcc-4.6.3/gcc/crtstuff.c	2010-12-23 12:08:21.000000000 +0000
-+++ gcc-4.6.3-psp/gcc/crtstuff.c	2012-04-04 22:37:31.000000000 +0100
-@@ -48,7 +48,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
--
-+#define USED_FOR_TARGET
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
-diff -Nbaur gcc-4.6.3/libcpp/Makefile.in gcc-4.6.3-psp/libcpp/Makefile.in
---- gcc-4.6.3/libcpp/Makefile.in	2012-03-01 12:03:46.000000000 +0000
-+++ gcc-4.6.3-psp/libcpp/Makefile.in	2012-04-05 09:32:31.000000000 +0100
-@@ -212,8 +212,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
-+POSTCOMPILE =
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -Nbaur gcc-4.6.3/libgcc/config.host gcc-4.6.3-psp/libgcc/config.host
---- gcc-4.6.3/libgcc/config.host	2011-11-23 22:15:54.000000000 +0000
-+++ gcc-4.6.3-psp/libgcc/config.host	2012-04-04 22:37:31.000000000 +0100
-@@ -436,6 +436,8 @@
- 	;;
- mipstx39-*-elf* | mipstx39el-*-elf*)
- 	;;
-+mips*-psp-elf*)
-+	;;
- mmix-knuth-mmixware)
- 	extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- 	tmake_file="${tmake_file} ${cpu_type}/t-${cpu_type}"

dkpsp/scripts/build-gcc.sh

@@ -1,201 +0,0 @@
-#!/bin/sh
-
-#---------------------------------------------------------------------------------
-# build and install binutils
-#---------------------------------------------------------------------------------
-
-mkdir -p $target/binutils
-cd $target/binutils
-
-if [ ! -f configured-binutils ]
-then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
-	--prefix=$prefix --target=$target --disable-nls --disable-debug \
-	--enable-lto --enable-plugins \
-	--enable-poison-system-directories \
-	--disable-dependency-tracking  --disable-werror \
-	$CROSS_PARAMS \
-	|| { echo "Error configuring binutils"; exit 1; }
-	touch configured-binutils
-fi
-
-if [ ! -f built-binutils ]
-then
-	$MAKE || { echo "Error building binutils"; exit 1; }
-	touch built-binutils
-fi
-
-
-if [ ! -f installed-binutils ]
-then
-	$MAKE install || { echo "Error installing binutils"; exit 1; }
-	touch installed-binutils
-fi
-cd $BUILDDIR
-
-#---------------------------------------------------------------------------------
-# build and install just the c compiler
-#---------------------------------------------------------------------------------
-mkdir -p $target/gcc
-cd $target/gcc
-
-
-if [ ! -f configured-gcc ]
-then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
-	--enable-languages=c,c++,objc,obj-c++ \
-	--disable-multilib\
-	--disable-shared --disable-win32-registry --disable-nls\
-	--enable-cxx-flags="-G0" \
-	--disable-libstdcxx-pch \
-	--target=$target \
-	--with-newlib \
-	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
-	--enable-lto $plugin_ld \
-	--prefix=$prefix \
-	--disable-dependency-tracking \
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPSP release 17" \
-	$CROSS_PARAMS \
-	|| { echo "Error configuring gcc"; exit 1; }
-	touch configured-gcc
-fi
-
-
-if [ ! -f built-gcc ]
-then
-	$MAKE all-gcc || { echo "Error building gcc"; exit 1; }
-	touch built-gcc
-fi
-
-
-if [ ! -f installed-gcc ]
-then
-	$MAKE install-gcc || { echo "Error installing gcc"; exit 1; }
-	touch installed-gcc
-fi
-
-unset CFLAGS
-cd $BUILDDIR/pspsdk-$PSPSDK_VER
-
-if [ ! -f bootstrap-sdk ]
-then
-	./bootstrap || { echo "ERROR RUNNING PSPSDK BOOTSTRAP"; exit 1; }
-	touch bootstrap-sdk
-fi
-
-if [ ! -f configured-sdk ]
-then
-	CFLAGS_FOR_HOST=$cflags LDFLAGS=$ldflags ./configure --with-pspdev="$prefix" --disable-dependency-tracking $CROSS_PARAMS || { echo "ERROR RUNNING PSPSDK CONFIGURE"; exit 1; }
-	touch configured-sdk
-fi
-
-if [ ! -f install-sdk-data ]
-then
-	$MAKE install-data || { echo "ERROR INSTALLING PSPSDK HEADERS"; exit 1; }
-	touch install-sdk-data
-fi
-
-cd $BUILDDIR
-
-unset CFLAGS
-unset CFLAGS_FOR_HOST
-unset LDFLAGS
-
-#---------------------------------------------------------------------------------
-# build and install newlib
-#---------------------------------------------------------------------------------
-mkdir -p $target/newlib
-cd $target/newlib
-
-if [ ! -f configured-newlib ]
-then
-	../../newlib-$NEWLIB_VER/configure \
-	--target=$target \
-	--prefix=$prefix \
-	--disable-dependency-tracking \
-	|| { echo "Error configuring newlib"; exit 1; }
-	touch configured-newlib
-fi
-
-if [ ! -f built-newlib ]
-then
-	$MAKE || { echo "Error building newlib"; exit 1; }
-	touch built-newlib
-fi
-
-if [ ! -f installed-newlib ]
-then
-	$MAKE install || { echo "Error installing newlib"; exit 1; }
-	touch installed-newlib
-fi
-
-#---------------------------------------------------------------------------------
-# build and install the final compiler
-#---------------------------------------------------------------------------------
-
-cd $BUILDDIR
-
-cd $target/gcc
-
-if [ ! -f built-stage2 ]
-then
-	$MAKE all || { echo "Error building gcc stage2"; exit 1; }
-	touch built-stage2
-fi
-
-if [ ! -f installed-stage2 ]
-then
-	$MAKE install || { echo "Error installing gcc stage2"; exit 1; }
-	touch installed-stage2
-fi
-
-rm -fr $prefix/$target/sys-include
-cd $BUILDDIR/pspsdk-$PSPSDK_VER
-
-#---------------------------------------------------------------------------------
-# build and install the psp sdk
-#---------------------------------------------------------------------------------
-echo "building pspsdk ..."
-
-if [ ! -f built-sdk ]
-then
-	$MAKE || { echo "ERROR BUILDING PSPSDK"; exit 1; }
-	touch built-sdk
-fi
-
-if [ ! -f installed-sdk ]
-then
-	$MAKE install || { echo "ERROR INSTALLING PSPSDK"; exit 1; }
-	touch installed-sdk
-fi
-
-cd $BUILDDIR
-
-#---------------------------------------------------------------------------------
-# build and install the debugger
-#---------------------------------------------------------------------------------
-mkdir -p $target/gdb
-cd $target/gdb
-
-if [ ! -f configured-gdb ]
-then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../gdb-$GDB_VER/configure \
-	--disable-nls --prefix=$prefix --target=$target --disable-werror \
-	--disable-dependency-tracking \
-	$CROSS_PARAMS \
-	|| { echo "Error configuring gdb"; exit 1; }
-	touch configured-gdb
-fi
-
-if [ ! -f built-gdb ]
-then
-	$MAKE || { echo "Error building gdb"; exit 1; }
-	touch built-gdb
-fi
-
-if [ ! -f installed-gdb ]
-then
-	$MAKE install || { echo "Error installing gdb"; exit 1; }
-	touch installed-gdb
-fi
-

select_toolchain.sh

@@ -1,5 +1,17 @@
 #!/bin/bash
 VERSION=0
+case "$BUILD_DKPRO_PACKAGE" in
+  "1" )
+    VERSION=1
+  ;;
+  "2" )
+    VERSION=2
+  ;;
+  "3" )
+    VERSION=3
+  ;;
+esac
+
 while [ $VERSION -eq 0 ]
 do
   echo
@@ -7,7 +19,6 @@ do
   echo
   echo "1: devkitARM (gba gp32 ds)"
   echo "2: devkitPPC (gamecube wii)"
-  echo "3: devkitPSP (PSP)"
   read VERSION
 
   if [ "$VERSION" -ne 1 -a "$VERSION" -ne 2 -a "$VERSION" -ne 3 ]
@@ -18,33 +29,24 @@ done
 
 case "$VERSION" in
   "1" )
-    GCC_VER=4.7.0
+    GCC_VER=6.3.0
-    BINUTILS_VER=2.22
+    BINUTILS_VER=2.27
-    NEWLIB_VER=1.20.0
+    NEWLIB_VER=2.5.0
-    GDB_VER=7.4
+    GDB_VER=7.12
     basedir='dkarm-eabi'
     package=devkitARM
-    target=arm-eabi
+    target=arm-none-eabi
     toolchain=DEVKITARM
   ;;
   "2" )
-    GCC_VER=4.6.3
+    GCC_VER=6.3.0
-    BINUTILS_VER=2.22
+    BINUTILS_VER=2.27
-    NEWLIB_VER=1.20.0
+    MN_BINUTILS_VER=2.17
-    GDB_VER=7.4
+    NEWLIB_VER=2.5.0
+    GDB_VER=7.11
     basedir='dkppc'
     package=devkitPPC
     target=powerpc-eabi
     toolchain=DEVKITPPC
   ;;
-  "3" )
+esac
-    GCC_VER=4.6.3
-    BINUTILS_VER=2.22
-    NEWLIB_VER=1.20.0
-    GDB_VER=7.4
-    basedir='dkpsp'
-    package=devkitPSP
-    target=psp
-    toolchain=DEVKITPSP
-  ;;
-esac

strip_bins.sh

@@ -19,6 +19,10 @@ do
 	then
 		$HOST_STRIP $f
 	fi
+	if [[ "$f" == *.dll ]]
+	then
+		$HOST_STRIP -d $f
+	fi
 done
 
 if [ $VERSION -eq 2 ]; then