felix
Compiling even a simple SDL2 'hello world' program with gcc -Wstrict-prototypes (GCC 6.2.1) results in warnings like:
/usr/include/SDL2/SDL_gamecontroller.h:143:1: attention : function declaration isn't a prototype [-Wstrict-prototypes]
extern DECLSPEC int SDLCALL SDL_GameControllerNumMappings();
^~~~~~
It seems there is a missing 'void' between the parentheses.
This currently doesn't affect absolute motion, which would need to be implemented on each windowing system so the cursor matches the reported mouse coordinates.
realitix
SDL2 allows to create widow and to get information through SDL_SysWMinfo.
But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system.
Sadly, SDL2 provides only HWND but not HINSTANCE.
In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me.
I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)
Kai Sterker
SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings.
As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
Albert Casals
On a RaspberryPI, it might become convenient to specify the Dispmanx layer SDL uses.
Currently, it is hardcoded to be 10000 to sit above most applications.
This can be specially useful when integrating other graphical apps and frameworks like OMXplayer, QT5 etc.. in order to have more flexibility on their Z-order.
Sylvain
After a long time, I found out more clearly what was going wrong.
The native libraries should be built with a "APP_PLATFORM" as low as possible.
Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml
So that the application never runs on a lower APP_PLATFORM than it has been built for.
An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10
(If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10.
And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".)
to precise what happened in the initial reported test-case:
Let say the "c" code contains a call to "srand()".
with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()".
with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()".
but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()).
So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10.
That was the issue. The path tried to fix this by in fact always calling srand48().
SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform.
It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions.
Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
Daniel Gibson
Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR.
SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
Weitian Leung
Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too),
enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
Daniel Gibson
Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface.
Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing.
I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that:
SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value.
Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as
surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
Ryan C. Gordon
We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.
C.W. Betts
Swift is very strict with types, so much that those of different signedness/size must be cast. Most of the defines are imported as 32-bit signed integers, while the corresponding field in a struct is a 32-bit unsigned integer. Appending a "u" would cause the defined types to be imported as 32-bit unsigned integers.
joe.gsoc16
I recently looked into Unicode support in SDL2 and realized that
SDL_TEXTEDITING doesn't get triggered at all (Japanese IME).
According to others on IRC it works fine on Windows/Mac but not
for me on (arch)Linux.
When compiling SDL with autotools, IBus support is enabled by
default but not so with CMake.
I never used CMake before but got it working and also included
that pkg-config determines flags for dbus (FIXME in CMakeLists).
Simon Hug
The description of the SDL_RenderClear function in the SDL_render.h header says the following:
"This function clears the entire rendering target, ignoring the viewport."
The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do.
The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */
Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers.
An exception is direct3d11 which uses a clear function that ignores the scissor test.
Simon Hug
The current SDL_SaveBMP_RW function that saves surfaces to a BMP uses an old bitmap header which doesn't officially support alpha channels. Applications just ignore the byte where the alpha is stored. This can easily be extended by using a newer header version and setting the alpha mask.
The attached patch has these changes:
- Extending the description of the function in the SDL_surface.h header with the supported formats.
- Refining when surfaces get stored to a 32-bit BMP. (Must have bit depth of 8 or higher and must have an alpha mask or colorkey.)
- Fixing a small bug that saves 24-bit BGR surfaces with a colorkey in a 24-bit BMP.
- Adding code that switches to the bitmap header version 4 if the surface has an alpha mask or colorkey. (I chose version 4 because Microsoft didn't lose its documentation behind a file cabinet like they did with version 3.)
- Adding a hint that can disable the use of the version 4 header. This is for people that need the legacy header or like the old behavior better. (I'm not sure about the hint name, though. May need changing if there are any rules to that.)
Kai Sterker
There are already patches available from mingw64 that fix the issue
https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-SDL2
With those applied, I could compile SDL2 without problems. But of course, it would be preferable if SDL built cleanly from source.
The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used.
A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
This is for corner cases where a multi-window app is activated and wants to
make a decision about where focus should go.
This patch came from Unreal Engine 4's fork of SDL, compliments of Epic Games.
Sylvain
When using API 21 and running on an old device (android < 5.0 ?) some function are missing.
functions are (at least) : signal, sigemptyset, atof, stpcpy (strcat and strcpy), srand, rand.
Very few modifications on SDL to get this working :
on SDL
======
Undefine android configuration :
HAVE_SIGNAL
HAVE_SIGACTION
HAVE_ATOF
In "SDL_systrhead.c", comment out the few block of lines with "sigemptyset".
Android.mk:
remove the compilation of "test" directory because it contains a few rand/srand calls
Also, there are more discussions about this in internet :
https://groups.google.com/forum/#!topic/android-ndk/RjO9WmG9pfEhttp://stackoverflow.com/questions/25475055/android-ndk-load-library-cannot-locate-srand
This was the only thing that made SDL_config.h generate differently between
32 and 64-bit versions of Linux, so instead we force a function cast in our
X11 code to match our dynamic loader version, which removes the compile error
on some machines that prompted this test in the first place.
Xlib never wrote to this data, so if you're on an older Xlib where this param
wasn't const, your data should still be intact when we force the caller to
think it was actually const after all.
Fixes Bugzilla #1893.
Otherwise, SDL_PIXELFORMAT_BGR24 is reported as having alpha, because
its SDL_ARRAYORDER_BGR pixel order uses the same integer value as
SDL_PACKEDORDER_RGBA, since we weren't checking the pixel type to
differentiate.
Fixes Bugzilla #2977.
This lets windows know when they are dropping a mouse event because their
hit test reported something other than SDL_HITTEST_NORMAL. It lets them know
exactly where in the event queue this happened.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This is currently implemented for X11, Cocoa, Windows, and DirectFB.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This allows an app to know when a set of drops are coming in a grouping of
some sort (for example, a user selected multiple files and dropped them all
on the window with a single drag), and when that set is complete.
This also adds a window ID to the drop events, so the app can determine to
which window a given drop was delivered. For application-level drops (for
example, you launched an app by dropping a file on its icon), the window ID
will be zero.
Specifically: always on top, skip taskbar, tooltip, utility, and popup menu.
This is currently only implemented for X11.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
"UWP" appears to be Microsoft's new name for WinRT/Windows-Store APIs.
This set of changes updates SDL's WinRT backends to support the Win10 flavor
of WinRT. It has been tested on Win10 on a desktop. In theory, it should
also support Win10 on other devices (phone, Xbox One, etc.), however further
patches may be necessary.
This adds:
- a set of MSVC 2015 project files, for use in creating UWP apps
- modifications to various pieces of SDL, in order to compile via MSVC 2015 +
the Win10 API set
- enables SDL_Window resizing and programmatic-fullscreen toggling, when using
the WinRT backend
- WinRT README updates
WinRT 8.0 (Phone and non-Phone) didn't offer an API to set an already-created
thread's priority. WinRT 8.1 offered this API, along with several other
Win32 thread functions that were previously unavailable (in WinRT).
This change makes WinRT 8.1+ platforms use SDL's Win32 backend.
This change-set fixes a lot of windowing related bugs, especially with
regards to Windows 8.x apps running on Windows 10 (which was the driver for
this work). The primary fixes include:
* listed display modes were wrong, especially when launching apps into a
non-fullscreen space
* reported window flags were often wrong, especially on Windows 10
* fullscreen/windowed mode switches weren't failing (they are not
programmatically possible in Win 8.x apps).
Note that extra steps must be taken when using glReadPixels to read the contents of the main OpenGL ES framebuffer on iOS, if multisampling is used. See the OpenGL ES section of README-ios.md for details.
There are platforms it isn't implemented on (and currently can't be
implemented on!), and there's currently no way for an app to know this.
This shouldn't break ABI on apps that moved to a revision between 2.0.3 and
2.0.4.
Clarify that grabbing the mouse only works with one window at a time; this was
always true at the system level, though SDL could previously get confused
by multiple simultaneous grabs, so now we explicitly break any existing
grab before starting a new one and document it as such.
Also track the window that is currently grabbed, and provide an API to query
for that window. This makes it easy to automate mouse ungrabbing at
breakpoints with gdb7's scripting, since the scripts can now know which window
to ungrab.
In 2.1, we should probably change this API to SDL_GrabInput(win) and
SDL_UngrabInput(void), or something.
This extension allows the user to specify whether a full flush is performed when making a context not current.
The only way to set this currently is at context creation, so this patch provides that functionality.
Defualt behaviour is set at FLUSH, as per the spec.
This patch does not contain the changes to WGL, appleGL or other platforms as I do not have access to GL 4.5 hardware on those platforms.
Full details on the use of KHR_context_flush_control can be found here:
https://www.opengl.org/registry/specs/KHR/context_flush_control.txt
This fills in the core pieces and fully implements it for Mac OS X.
Most other platforms, at the moment, will report a disconnected device if
it fails to write audio, but don't notice if the system's device list changed
at all.
64-bit Linux uses a "long" instead of "long long" for 64-bit ints.
Added a special-case this so SDL_PRI?64 doesn't trigger compiler warnings
when used with SDL's 64-bit datatypes on 64-bit Linux.
- Added new custom launch screen code. It uses the launch screen nib when available on iOS 8+, the launch images dictionary if the launch screen nib isn't available, and the old standard image names if the launch image dictionary isn't in the plist.
The launch screen is now hidden during the first call to SDL_PumpEvents rather than SDL_CreateWindow so apps can have the launch screen still visible if they do time-consuming loading after creating their window. It also fades out in roughly the same way as the system launch screen behavior.
It can be disabled by setting the SDL_IPHONE_LAUNCHSCREEN define in SDL_config_iphoneos.h to 0.
- A blank UIView is now created and displayed when the window is first created. The old behavior was to defer creating any view until SDL_GL_CreateContext, which prevented rotation, touch events, and other windowing-related things from working until then. This also makes it easier to use SDL_GetWindowWMInfo after creating a window.
- Moved the keyboard and animation callback code from SDL's UIView subclasses to its UIViewController subclass, which lets them work properly in all cases when a SDL window is valid, even before SDL_GL_CreateContext is called and after SDL_GL_DeleteContext is called.
- SDL_GL_CreateContext, SDL_GL_SwapWindow, SDL_GL_MakeCurrent, and SDL_GL_DeleteContext are more robust.
- Fixed some edge cases where SDL windows weren't rotating properly or their reported sizes were out of sync with their actual sizes.
- Removed all calls to [UIApplication setStatusBarOrientation:]. It doesn't seem to work as expected in all cases in recent iOS versions.
- Some code style cleanup.
--HG--
branch : iOS-improvements
Jonas Kulla
The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c.
I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
This is a little macro magic to use malloc() directly instead of SDL_malloc(),
etc, so static analysis tests that know about the C runtime can function
properly, and understand that we are dealing with heap allocations, etc.
This changed our static analysis report from 5 outstanding bugs to 30.
5x as many bugs were hidden by SDL_malloc() not being recognized as malloc()
by the static analyzer!
SDL_WinRTRunApp() is used on WinRT to launch a main(int, char **)-style
function. It has optional, and experimental support for launching content
inside a XAML control, backed by a main() function running on a separate thread.
This is provided via it's 2nd parameter, which can be a pointer to a XAML
control. (If NULL, XAML support will not be used.)
This change renames the experimental feature's parameter (to SDL_WinRTRunApp())
as "reserved", until such time as the functionality is ready for use. It will
likely be renamed again in the future, when running SDL on top of a XAML control
via a separate thread, becomes reasonably usable.
With this commit, you can compile SDL2 with Emscripten
( http://emscripten.org/ ), and make your SDL-based C/C++ program
into a web app.
This port was due to the efforts of several people, including: Charlie Birks,
Sathyanarayanan Gunasekaran, Jukka Jylänki, Alon Zakai, Edward Rudd,
Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)
The expected use case is for games that are designed with multiple aspect ratios already in mind and leave optional margins on the edges of the game which won't hurt if they are cut off.
An example use case is a game is designed for wide-screen/16:9, but then wants to deploy on an iPad which is 4:3. Normally, SDL will letterbox, which will shrink things and result in wasted space. But the designer already thought about 4:3 and designed the edges of the game so they could be cut off without any functional loss. So rather than wasting space with letterboxing, "overscan" mode will zoom the rendering to fill up the entire screen. Parts on the edges will be drawn offscreen, but since the game was already designed with this in mind, it is fine. The end result is the iPad (4:3) experience is much better since it feels like a game designed for that screen aspect ratio.
This patch introduces a new SDL_hint: SDL_HINT_RENDER_LOGICAL_SIZE_MODE.
Valid values are "letterbox" or "0" for letterboxing and "overscan" or "1" for overscan.
The default mode is letterbox to preserve existing behavior.
// Example usage:
SDL_SetHint(SDL_HINT_RENDER_LOGICAL_SIZE_MODE, "overscan");
SDL_RenderSetLogicalSize(renderer, SCREEN_WIDTH, SCREEN_HEIGHT);
Elias Vanderstuyft
"Horizontal" is not very precise, use "Positive phase" instead.
"Positive" because it's actually waveform(2*pi*t + phase) instead of waveform(2*pi*t - phase).
Elias Vanderstuyft
It's not obvious from the general "haptic direction" description what the SDL direction actually means in terms of force magnitude sign,
currently its meaning is only reflected by the example.
This change does a few things, all with regards to the WinRT implementation of
SDL_GetPrefPath():
1. it fixes a bug whereby SDL_GetPrefPath() did not create the directory it
returned. On other SDL platforms, SDL_GetPrefPath() will create separate
directories for its 'org' and 'app' folders. Without this, attempts to create
files in the pref-path would fail, unless those directories were first created
by the app, or by some other library the app used. This change makes sure
that these directories get created, before SDL_GetPrefPath() returns to its
caller(s).
2. it defaults to having SDL_GetPrefPath() return a WinRT 'Local' folder
on all platforms. Previously, for Windows Store apps, it would have used a
different, 'Roaming' folder. Files in Roaming folders can be automatically,
and synchronized across multiple devices by Windows. This synchronization can
happen while the app runs, with new files being copied into a running app's
pref-path. Unless an app is specifically designed to handle this scenario,
there is a chance that save-data could be overwritten in unwanted or
unexpected ways.
The default is now to use a Local folder, which does not get synchronized, and
which is arguably a bit safer to use. Apps that wish to use Roaming folders
can do so by setting SDL_HINT_WINRT_PREF_PATH_ROOT to "roaming", however it
is recommended that one first read Microsoft's documentation for Roaming
files, a link to which is provided in README-winrt.md.
To preserve older pref-path selection behavior (found in SDL 2.0.3, as well as
many pre-2.0.4 versions of SDL from hg.libsdl.org), which uses a Roaming path
in Windows Store apps, and a Local path in Windows Phone, set
SDL_HINT_WINRT_PREF_PATH_ROOT to "old".
Please note that Roaming paths are not supported on Windows Phone 8.0, due to
limitations in the OS itself. Attempts to use this will fail.
(Windows Phone 8.1 does not have this limitation, however.)
3. It makes SDL_GetPrefPath(), when on Windows Phone 8.0, and when
SDL_HINT_WINRT_PREF_PATH_ROOT is set to "roaming", return NULL, rather than
silently defaulting to a Local path (then switching to a Roaming path if and
when the user upgraded to Windows Phone 8.1).
SDL_HINT_WINRT_PREF_PATH_ROOT allows WinRT apps to alter the path that
SDL_GetPrefPath() returns. Setting it to "local" uses the app's
OS-defined Local folder, setting it to "roaming" uses the app's OS-defined
Roaming folder.
Roaming folder support is not available in Windows Phone 8.0. Attempts to
make SDL_GetPrefPath() return a Roaming folder on this OS will be ignored.
Various bits of documentation on this were added to SDL_hints.h, and to
README-winrt.md
The "future-dev" branch of MSOpenTech's ANGLE/WinRT repository (at
https://github.com/msopentech/angle) includes support for Windows Phone 8.1.
This change allows it to be used in conjunction with SDL's OpenGL functions.
A negative periodic magnitude doesn't exist in Windows' and MacOS' FF APIs
The periodic magnitude parameter of the SDL Haptic API is based on the Linux
FF API, so it means they are not directly compatible:
'dwMagnitude' is a 'DWORD', which is unsigned.
Fixes Bugzilla #2701.
skaller
using gcc 4.2 (the default) on Mac OSX 10.6.8
CC build/SDL_dynapi.lo
In file included from /Users/johnskaller/SDL/src/dynapi/SDL_dynapi.c:31:
include/SDL_syswm.h:211:39: error: missing binary operator before token "("
The fault appears to be here:
#if defined(__OBJC__) && __has_feature(objc_arc)
that the __has_feature macro is not supported by gcc 4.2.
The code works fine with my clang 3.3svn.
Tobias Himmer
this patch adds a check to the CMake build script to detect whether the VideoCore API is available.
If it is found, it enables SDL_VIDEO_DRIVER_RPI and will also add the needed include/library directory flags to CMAKE_C_FLAGS so the subsequent check for GLES succeeds in picking up the headers.
Seems to work fine on Raspbian.
There was a misconception that Linux's saturation and deadband parameters -
on which the corresponding SDL parameters were based - use only half of the
possible range.
Thanks, Elias!
Partially fixes Bugzilla #2686.
1) Moves all READMEs to docs/
2) Renames them to *.md, adds some Markdown with the idea to add a lot more
3) Moves the doxyfile config to doc/ and makes it parse the headers at ../include as well as the md files in docs.
4) Skips SDL_opengl*.h headers from the docs
5) Minor fixes to doxyfile
binarycrusader
Since changeset 358696c354a8, SDL 2.0 has been broken on Solaris when compiling with the Solaris Studio compiler (which uses the pthread implementation of SDL_AtomicLock).
Notably, it gets stuck at the MemoryBarrierRelease in SDL_GetErrBuf:
6585 # 218
6586 if (!tls_errbuf && !tls_being_created) {
6587 SDL_AtomicLock_REAL ( & tls_lock );
6588 if (!tls_errbuf) {
6589 SDL_TLSID slot;
6590 tls_being_created = SDL_TRUE;
6591 slot = SDL_TLSCreate_REAL ( );
6592 tls_being_created = SDL_FALSE;
6593 { SDL_SpinLock _tmp = 0 ; SDL_AtomicLock_REAL ( & _tmp ) ; SDL_AtomicUnlock_REAL ( & _tmp ) ; };
^^^ loops forever above
6594 tls_errbuf = slot;
6595 }
6596 SDL_AtomicUnlock_REAL ( & tls_lock );
6597 }
Running: testthread
(process id 28926)
^Cdbx: warning: Interrupt ignored but forwarded to child.
signal INT (Interrupt) in __nanosleep at 0xfe52a875
0xfe52a875: __nanosleep+0x0015: jae __nanosleep+0x23 [ 0xfe52a883, .+0xe ]
Current function is SDL_Delay_REAL
204 was_error = nanosleep(&tv, &elapsed);
(dbx) where
[1] __nanosleep(0xfeffe848, 0xfeffe850, 0xfe75a5ac, 0xfe5169d8), at 0xfe52a875
[2] nanosleep(0xfeffe848, 0xfeffe850), at 0xfe516a3b
=>[3] SDL_Delay_REAL(ms = 0), line 204 in "SDL_systimer.c"
[4] SDL_AtomicLock_REAL(lock = 0xfeffe88c), line 104 in "SDL_spinlock.c"
[5] SDL_GetErrBuf(), line 225 in "SDL_thread.c"
[6] SDL_ClearError_REAL(), line 216 in "SDL_error.c"
[7] SDL_InitSubSystem_REAL(flags = 0), line 116 in "SDL.c"
[8] SDL_Init_REAL(flags = 0), line 244 in "SDL.c"
[9] SDL_Init(a = 0), line 89 in "SDL_dynapi_procs.h"
[10] main(argc = 1, argv = 0xfeffe948), line 65 in "testthread.c"
As far as I can tell, this is because pthread_spin_trylock() always returns EBUSY for this particular lock; since it works in other places, I'm suspicious.
Different Solaris Studio compiler versions seem to make no difference.
I've verified this is broken on Linux as well if SDL_spinlock.c is modified to use the pthread implementation.
This appears to be because pthread_spin_init() and pthread_spin_destroy() are not used with the locks as required.
Notes:
- Support for the 'Guide' button does not seem to be possible, as
XInputGetStateEx is not available on WinRT.
- Haptic support appears to be working on WinRT now!
- SDL/WinRT does not allow calls to LoadLibrary or LoadLibraryEx. The calls
to those were removed by this change, but only when compiling for WinRT.
Non-WinRT Windows will continue to detect and load XInput via LoadLibrary and
GetProcAddress calls.
If the EGL extension EGL_KHR_create_context is available, we can use it to
set the core/compatability profile and the minimum OpenGL version.
Use this if it is available to get the context requested by the GL attributes.
Alex Szpakowski
SDL's code for exposing the accelerometer as a joystick on iOS currently uses UIAccelerometer, which was superseded by the CoreMotion framework and deprecated since iOS 5.
The UIAccelerometer code still works (for now), but it also throws deprecation warnings whenever SDL is built for iOS, since SDL's deployment target is no longer below iOS 5.
I've created a patch which replaces the old UIAccelerometer code with a replacement based on the CoreMotion framework. It has identical functionality (to SDL users), however iOS apps are now required to link to the CoreMotion framework when using SDL.
This adds support for all XInput devices, exposed through the SDL joystick API.
The button and axis reporting for XInput devices has been changed to match DirectInput and other platforms.
The game controller xinput mapping has been updated so this change is seamless.
There is a new hint, SDL_HINT_XINPUT_USE_OLD_JOYSTICK_MAPPING, for any applications that have hardcoded the old xinput button and axis set. This hint will be removed in SDL 2.1.
Alex Szpakowski
Now that SDL for iOS requires at least iOS 5.1 at runtime, there are several old codepaths in the UIKit backend which can be removed. I've attached a patch which does so.
Author: Sam Clegg <sbc@chromium.org>
Date: Fri Jun 20 12:52:11 2014
Fix win32 build which was failing due to missing PRIs64.
This change adds definitions for the C99 PRIs16 and PRIu64
which are missing from <stdint.h> on at last win32 and
possibly other platforms.
These already existed in testgesture.c so I removed them
from there also.
Jørgen Tjernø
If you #define NO_SDL_GLEXT before including SDL_opengl.h, it still includes the platform-provided glext.h. The comments indicate that this define is intended to be used when you provide your own glext.h (quote from SDL_opengl.h: "Define this if you have your own version of glext.h and want to disable the version included in SDL_opengl.h.")
This is a problem because glext.h depends on the contents of gl.h, and it's practical to let SDL_opengl.h pick the right #include for gl.h for our platform.
