diff --git a/share/wut.mk b/share/wut.mk
new file mode 100644
index 00000000..02a8b6dd
--- /dev/null
+++ b/share/wut.mk
@@ -0,0 +1,168 @@
+# wut makefile beta - let's just stick with cmake, yeah?
+# should work for out-of-tree builds
+# Scroll to the bottom for predefined/utility variables
+
+# If V isn't given as 1 on the commandline, prepend "@" onto all our commands
+# See uses of $(Q) later - this stops make echoing our commands
+ifneq ($(strip $(V)), 1)
+	Q ?= @
+endif
+
+# ------------------------------------------------------------------------------
+# Toolchain includes and path setup
+
+# Make sure we have devkitPPC
+ifeq ($(strip $(DEVKITPRO)),)
+	$(error "Please set DEVKITPRO in your environment.")
+endif
+
+# May as well have a guess. ?= means an existing DEVKITPPC value isn't touched.
+export DEVKITPPC ?= $(DEVKITPRO)/devkitPPC
+
+# Pull in devkitPPC bits - this gets $(CC) and friends set up
+include $(DEVKITPPC)/base_tools
+
+# Make sure we have wut
+ifeq ($(strip $(WUT_ROOT)),)
+	$(error "Please set WUT_ROOT in your environment.")
+endif
+
+# Grab wut tools we need.
+WUT_ELF2RPL := $(WUT_ROOT)/bin/elf2rpl
+WUT_RPLEXPORTGEN := $(WUT_ROOT)/bin/rplexportgen
+
+# If DEPSDIR isn't defined, assume this is an out-of-tree build and that we're
+# already running in the build folder - thus, put deps in CURDIR
+DEPSDIR ?= $(CURDIR)
+
+# Default to .d for depends
+DEPSEXT ?= d
+
+# ------------------------------------------------------------------------------
+# Get our flags in order
+# There's some default wut flags, they need to be added
+
+# cpu type and hardware flags, keep all relocations (for elf2rpl), wut includes
+WUT_CFLAGS  := -mcpu=750 -meabi -mhard-float  -isystem $(WUT_ROOT)/include
+# Defines to tell code about this environment
+WUT_CFLAGS  += -D__WIIU__ -D__WUT__ -D__WUT_MAKEFILE__
+# keep relocations, use wut linker script
+WUT_LDFLAGS := -Wl,-q -Wl,-z,nocopyreloc -T $(WUT_ROOT)/share/wut.ld
+# Path for wut libraries, Always link against coreinit
+WUT_LDFLAGS += -L$(WUT_ROOT)/lib -lcoreinit
+
+# Append that to user-provided cflags and others
+CFLAGS    += $(WUT_CFLAGS)
+CXXFLAGS  += $(WUT_CFLAGS)
+OBJCFLAGS += $(WUT_CFLAGS)
+# assembler-with-cpp allows using #defines and stuff in Assembly source
+# It's forced on devkitPPC, so it's forced here
+ASFLAGS   += $(WUT_CFLAGS) -x assembler-with-cpp
+LDFLAGS   += $(WUT_LDFLAGS)
+
+# Linking sucks... this make the ordering of libraries irrelevant, but the
+# manuals reckon it's not good for performance. Set WUT_NO_LDGROUPS=1 to disable
+# or DIY this bit (_PRE and _POST are included no matter what)
+ifneq ($(strip $(WUT_NO_LDGROUPS)), 1)
+	LDFLAGS_PRE += -Wl,--start-group
+	LDFLAGS_POST += -Wl,--end-group
+endif
+
+# RPX and RPL need slightly different crts (init code)
+%.rpx: LDFLAGS += -lwutcrt
+%.rpl: LDFLAGS += -lwutcrtrpl
+
+# ------------------------------------------------------------------------------
+# Linking bits
+
+# What should we call files that have been linked but not run through elf2rpl?
+WUT_RPLELF_SUFFIX := .elf
+
+# If we're making an rpl, pass --rpl into elf2rpl
+%.rpl: WUT_ELF2RPLFLAGS += --rpl
+
+# Main RPX/RPL linking rule. This process is basically identical for both types,
+# aside from a few flags (which we've already set)
+%.rpx %.rpl:
+# Use CXX to link our initial output file, ready for elf2rpl
+	@echo LD $(notdir $@)$(WUT_RPLELF_SUFFIX)
+	$(Q)$(CXX) $^ $(LDFLAGS_PRE) $(LDFLAGS) $(LDFLAGS_POST) -o $@$(WUT_RPLELF_SUFFIX)
+# Run elf2rpl on it
+	@echo ELF2RPL $(notdir $@)
+	$(Q)$(WUT_ELF2RPL) $(WUT_ELF2RPLFLAGS) $@$(WUT_RPLELF_SUFFIX) $@
+# Unless we're told not to, delete the initial output file
+	$(Q)if [ "$(WUT_KEEP_RPLELF)" == "" ]; then \
+		rm -f $@$(WUT_RPLELF_SUFFIX); \
+	fi
+
+# ------------------------------------------------------------------------------
+# Compilation rules
+# Bog-standard compilation rules. Only using these and not devkitPPC's
+# base_rules because the mkdir bits are needed
+
+%.o: %.cpp
+	@echo CXX $(notdir $<)
+	@mkdir -p $(dir $*)
+	$(Q)$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.$(DEPSEXT) $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+%.o: %.c
+	@echo CC $(notdir $<)
+	@mkdir -p $(dir $*)
+	$(Q)$(CC) -MMD -MP -MF $(DEPSDIR)/$*.$(DEPSEXT) $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+%.o: %.m
+	@echo CC $(notdir $<)
+	@mkdir -p $(dir $*)
+	$(Q)$(CC) -MMD -MP -MF $(DEPSDIR)/$*.$(DEPSEXT) $(OBJCFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+%.o: %.s
+	@echo CC $(notdir $<)
+	@mkdir -p $(dir $*)
+	$(Q)$(CC) -MMD -MP -MF $(DEPSDIR)/$*.$(DEPSEXT)  $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+%.o: %.S
+	@echo CC $(notdir $<)
+	@mkdir -p $(dir $*)
+	$(Q)$(CC) -MMD -MP -MF $(DEPSDIR)/$*.$(DEPSEXT) $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+%.a:
+	@echo AR $(notdir $@)
+	@mkdir -p $(dir $*)
+	@rm -f $@
+	$(Q)$(AR) -rc $@ $^
+
+# Add the dependency rules, if they exist
+include $(shell find $(DEPSDIR) -name "*.$(DEPSEXT)")
+
+# ------------------------------------------------------------------------------
+# Optional Extras
+# Maybe you want libc/newlib? or a devoptab? These contain the flags you need to
+# do it.
+
+# Enable newlib support, making more complex libc functions work. Basic stuff
+# like memset doesn't need this, but time functions and malloc do.
+# Unless you also use WUT_MALLOC_LDFLAGS, this will dedicate most of the default
+# Cafe heap to libc malloc.
+# To use:
+#  LDFLAGS += $(WUT_NEWLIB_LDFLAGS)
+WUT_NEWLIB_LDFLAGS := -Wl,--whole-archive -lwutnewlib -Wl,--no-whole-archive
+
+# Wrap calls to malloc and friends with calls to Cafe's MEMDefaultHeap
+# functions, effectivley bypassing the libc heap for most allocations. Forces
+# libc heap to be very small.
+# To use:
+#  LDFLAGS += $(WUT_MALLOC_LDFLAGS)
+WUT_MALLOC_LDFLAGS := -Wl,--whole-archive -lwutmalloc -Wl,--no-whole-archive
+
+# Enable libstdc++ support. Allows use of C++11 threads, along with other C++
+# functionality. Make sure to use WUT_NEWLIB_LDFLAGS too.
+# To use:
+#  LDFLAGS += $(WUT_STDCPP_LDFLAGS)
+WUT_STDCPP_LDFLAGS := -lstdc++
+WUT_STDCPP_LDFLAGS += -Wl,--whole-archive -lwutstdc++ -Wl,--no-whole-archive
+
+# Simple devoptab to allow filesystem access. Mounts the SD alongside the default
+# Cafe mounts (/vol/content etc.)
+# To use:
+#  LDFLAGS += $(WUT_DEVOPTAB_LDFLAGS)
+WUT_DEVOPTAB_LDFLAGS := -Wl,--whole-archive -lwutdevoptab -Wl,--no-whole-archive