diff --git a/Package.mk b/Package.mk
index 9d907b1..5647e9b 100644
--- a/Package.mk
+++ b/Package.mk
@@ -5,7 +5,7 @@ $(BUILD_DIR_ZIP)/chuni.zip:
 	$(V)cp $(BUILD_DIR_32)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_32)/chunihook/chunihook.dll \
 		$(DIST_DIR)/chuni/segatools.ini \
-		$(DIST_DIR)/chuni/start.bat \
+		$(DIST_DIR)/chuni/launch.bat \
 		$(BUILD_DIR_ZIP)/chuni
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -20,7 +20,7 @@ $(BUILD_DIR_ZIP)/cxb.zip:
 	$(V)cp $(BUILD_DIR_32)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_32)/cxbhook/cxbhook.dll \
 		$(DIST_DIR)/cxb/segatools.ini \
-		$(DIST_DIR)/cxb/start.bat \
+		$(DIST_DIR)/cxb/launch.bat \
 		$(BUILD_DIR_ZIP)/cxb
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -35,7 +35,7 @@ $(BUILD_DIR_ZIP)/diva.zip:
 	$(V)cp $(BUILD_DIR_64)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_64)/divahook/divahook.dll \
 		$(DIST_DIR)/diva/segatools.ini \
-		$(DIST_DIR)/diva/start.bat \
+		$(DIST_DIR)/diva/launch.bat \
 		$(BUILD_DIR_ZIP)/diva
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -50,7 +50,7 @@ $(BUILD_DIR_ZIP)/carol.zip:
 	$(V)cp $(BUILD_DIR_32)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_32)/carolhook/carolhook.dll \
 		$(DIST_DIR)/carol/segatools.ini \
-		$(DIST_DIR)/carol/start.bat \
+		$(DIST_DIR)/carol/launch.bat \
 		$(BUILD_DIR_ZIP)/carol
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -65,7 +65,7 @@ $(BUILD_DIR_ZIP)/idz.zip:
 	$(V)cp $(BUILD_DIR_64)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_64)/idzhook/idzhook.dll \
 		$(DIST_DIR)/idz/segatools.ini \
-		$(DIST_DIR)/idz/start.bat \
+		$(DIST_DIR)/idz/launch.bat \
     	$(BUILD_DIR_ZIP)/idz
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -80,7 +80,7 @@ $(BUILD_DIR_ZIP)/fgo.zip:
 	$(V)cp $(BUILD_DIR_64)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_64)/fgohook/fgohook.dll \
 		$(DIST_DIR)/fgo/segatools.ini \
-		$(DIST_DIR)/fgo/start.bat \
+		$(DIST_DIR)/fgo/launch.bat \
     	$(BUILD_DIR_ZIP)/fgo
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -96,7 +96,7 @@ $(BUILD_DIR_ZIP)/idac.zip:
 		$(BUILD_DIR_64)/idachook/idachook.dll \
 		$(DIST_DIR)/idac/segatools.ini \
 		$(DIST_DIR)/idac/config_hook.json \
-		$(DIST_DIR)/idac/start.bat \
+		$(DIST_DIR)/idac/launch.bat \
     	$(BUILD_DIR_ZIP)/idac
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -112,7 +112,7 @@ $(BUILD_DIR_ZIP)/swdc.zip:
 		$(BUILD_DIR_64)/swdchook/swdchook.dll \
 		$(DIST_DIR)/swdc/segatools.ini \
 		$(DIST_DIR)/swdc/config_hook.json \
-		$(DIST_DIR)/swdc/start.bat \
+		$(DIST_DIR)/swdc/launch.bat \
     	$(BUILD_DIR_ZIP)/swdc
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -127,7 +127,7 @@ $(BUILD_DIR_ZIP)/mercury.zip:
 	$(V)cp $(BUILD_DIR_64)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_64)/mercuryhook/mercuryhook.dll \
 		$(DIST_DIR)/mercury/segatools.ini \
-		$(DIST_DIR)/mercury/start.bat \
+		$(DIST_DIR)/mercury/launch.bat \
     	$(BUILD_DIR_ZIP)/mercury
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -141,7 +141,7 @@ $(BUILD_DIR_ZIP)/chusan.zip:
 	$(V)mkdir -p $(BUILD_DIR_ZIP)/chusan/DEVICE
 	$(V)cp $(DIST_DIR)/chusan/segatools.ini \
 		$(DIST_DIR)/chusan/config_hook.json \
-		$(DIST_DIR)/chusan/start.bat \
+		$(DIST_DIR)/chusan/launch.bat \
 		$(BUILD_DIR_ZIP)/chusan
 	$(V)cp $(BUILD_DIR_32)/chusanhook/chusanhook.dll \
 		$(BUILD_DIR_ZIP)/chusan/chusanhook_x86.dll
@@ -164,7 +164,7 @@ $(BUILD_DIR_ZIP)/mu3.zip:
 	$(V)cp $(BUILD_DIR_64)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_64)/mu3hook/mu3hook.dll \
 		$(DIST_DIR)/mu3/segatools.ini \
-		$(DIST_DIR)/mu3/start.bat \
+		$(DIST_DIR)/mu3/launch.bat \
     	$(BUILD_DIR_ZIP)/mu3
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -179,7 +179,7 @@ $(BUILD_DIR_ZIP)/mai2.zip:
 	$(V)cp $(BUILD_DIR_64)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_64)/mai2hook/mai2hook.dll \
 		$(DIST_DIR)/mai2/segatools.ini \
-		$(DIST_DIR)/mai2/start.bat \
+		$(DIST_DIR)/mai2/launch.bat \
     	$(BUILD_DIR_ZIP)/mai2
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -195,7 +195,7 @@ $(BUILD_DIR_ZIP)/cm.zip:
 		$(BUILD_DIR_64)/cmhook/cmhook.dll \
 		$(DIST_DIR)/cm/config_hook.json \
 		$(DIST_DIR)/cm/segatools.ini \
-		$(DIST_DIR)/cm/start.bat \
+		$(DIST_DIR)/cm/launch.bat \
     	$(BUILD_DIR_ZIP)/cm
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -211,7 +211,7 @@ $(BUILD_DIR_ZIP)/tokyo.zip:
 		$(BUILD_DIR_64)/tokyohook/tokyohook.dll \
 		$(DIST_DIR)/tokyo/config_hook.json \
 		$(DIST_DIR)/tokyo/segatools.ini \
-		$(DIST_DIR)/tokyo/start.bat \
+		$(DIST_DIR)/tokyo/launch.bat \
     	$(BUILD_DIR_ZIP)/tokyo
 	$(V)cp pki/billing.pub \
 		pki/ca.crt \
@@ -224,7 +224,7 @@ $(BUILD_DIR_ZIP)/kemono.zip:
 	$(V)mkdir -p $(BUILD_DIR_ZIP)/kemono
 	$(V)mkdir -p $(BUILD_DIR_ZIP)/kemono/DEVICE
 	$(V)cp $(DIST_DIR)/kemono/segatools.ini \
-		$(DIST_DIR)/kemono/start.bat \
+		$(DIST_DIR)/kemono/launch.bat \
 		$(BUILD_DIR_ZIP)/kemono
 	$(V)cp $(BUILD_DIR_32)/kemonohook/kemonohook.dll \
 		$(BUILD_DIR_ZIP)/kemono/kemonohook_x86.dll
diff --git a/board/led15070.c b/board/led15070.c
index c2d62a5..43a015d 100644
--- a/board/led15070.c
+++ b/board/led15070.c
@@ -103,19 +103,30 @@ HRESULT led15070_hook_init(
         io_led_set_fet_output_t _led_set_fet_output,
         io_led_dc_update_t _led_dc_update,
         io_led_gs_update_t _led_gs_update,
-        unsigned int first_port,
-        unsigned int num_boards)
+        unsigned int port_no[2])
 {
+    unsigned int num_boards = 0;
+
     assert(cfg != NULL);
+    assert(_led_init != NULL);
 
     if (!cfg->enable) {
         return S_FALSE;
     }
 
-    if (cfg->port_no != 0) {
-        first_port = cfg->port_no;
+    for (int i = 0; i < led15070_nboards; i++)
+    {  
+        if (cfg->port_no[i] != 0) {
+            port_no[i] = cfg->port_no[i];
+        }
+
+        if (port_no[i] != 0) {
+            num_boards++;
+        }
     }
 
+    assert(num_boards != 0);
+
     led_init = _led_init;
     led_set_fet_output = _led_set_fet_output;
     led_dc_update = _led_dc_update;
@@ -131,10 +142,7 @@ HRESULT led15070_hook_init(
 
         InitializeCriticalSection(&v->lock);
 
-        // TODO: IMPROVE!
-        first_port = i == 1 ? first_port + 2 : first_port;
-
-        uart_init(&v->boarduart, first_port);
+        uart_init(&v->boarduart, port_no[i]);
         v->boarduart.baud.BaudRate = 115200;
         v->boarduart.written.bytes = v->written_bytes;
         v->boarduart.written.nbytes = sizeof(v->written_bytes);
@@ -238,7 +246,7 @@ static HRESULT led15070_handle_irp_locked(int board, struct irp *irp)
     }
 
     for (;;) {
-#if 0
+#if defined(LOG_LED15070)
         dprintf("TX Buffer:\n");
         dump_iobuf(&boarduart->written);
 #endif
@@ -257,7 +265,7 @@ static HRESULT led15070_handle_irp_locked(int board, struct irp *irp)
             return hr;
         }
 
-#if 0
+#if defined(LOG_LED15070)
         dprintf("Deframe Buffer:\n");
         dump_iobuf(&req_iobuf);
 #endif
@@ -385,7 +393,9 @@ static HRESULT led15070_req_reset(int board, const struct led15070_req_any *req)
 
 static HRESULT led15070_req_set_input(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set input (board %u)\n", board);
+#endif
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -408,9 +418,10 @@ static HRESULT led15070_req_set_input(int board, const struct led15070_req_any *
 static HRESULT led15070_req_set_normal_12bit(int board, const struct led15070_req_any *req)
 {
     uint8_t idx = req->payload[0];
-
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set LED - Normal 12bit (board %u, index %u)\n",
            board, idx);
+#endif
 
     // TODO: Data for this command. Seen with Carol
 
@@ -435,9 +446,10 @@ static HRESULT led15070_req_set_normal_12bit(int board, const struct led15070_re
 static HRESULT led15070_req_set_normal_8bit(int board, const struct led15070_req_any *req)
 {
     uint8_t idx = req->payload[0];
-
-    // dprintf("LED 15070: Set LED - Normal 8bit (board %u, index %u)\n",
-    //        board, idx);
+#if defined(LOG_LED15070)
+    dprintf("LED 15070: Set LED - Normal 8bit (board %u, index %u)\n",
+           board, idx);
+#endif
 
     led15070_per_board_vars[board].gs[idx][0] = req->payload[1]; // R
     led15070_per_board_vars[board].gs[idx][1] = req->payload[2]; // G
@@ -468,8 +480,10 @@ static HRESULT led15070_req_set_multi_flash_8bit(int board, const struct led1507
     uint8_t idx_skip = req->payload[2];
 
     // TODO: useful?
-    // dprintf("LED 15070: Set LED - Multi flash 8bit (board %u, start %u, end %u, skip %u)\n",
-    //        board, idx_start, idx_end, idx_skip);
+#if defined(LOG_LED15070)
+    dprintf("LED 15070: Set LED - Multi flash 8bit (board %u, start %u, end %u, skip %u)\n",
+           board, idx_start, idx_end, idx_skip);
+#endif
 
     if (idx_skip > 0 && idx_skip <= (idx_end - idx_start + 1)) {
         idx_start += idx_skip;
@@ -508,9 +522,10 @@ static HRESULT led15070_req_set_multi_fade_8bit(int board, const struct led15070
     uint8_t idx_start = req->payload[0];
     uint8_t idx_end = req->payload[1];
     uint8_t idx_skip = req->payload[2];
-
-    // dprintf("LED 15070: Set LED - Multi fade 8bit (board %u, start %u, end %u, skip %u)\n",
-    //        board, idx_start, idx_end, idx_skip);
+#if defined(LOG_LED15070)
+    dprintf("LED 15070: Set LED - Multi fade 8bit (board %u, start %u, end %u, skip %u)\n",
+           board, idx_start, idx_end, idx_skip);
+#endif
 
     if (idx_skip > 0 && idx_skip <= (idx_end - idx_start + 1)) {
         idx_start += idx_skip;
@@ -545,7 +560,9 @@ static HRESULT led15070_req_set_multi_fade_8bit(int board, const struct led15070
 
 static HRESULT led15070_req_set_palette_7_normal_led(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set palette - 7 Normal LED (board %u)\n", board);
+#endif
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -567,7 +584,9 @@ static HRESULT led15070_req_set_palette_7_normal_led(int board, const struct led
 
 static HRESULT led15070_req_set_palette_6_flash_led(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set palette - 6 Flash LED (board %u)\n", board);
+#endif
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -589,7 +608,9 @@ static HRESULT led15070_req_set_palette_6_flash_led(int board, const struct led1
 
 static HRESULT led15070_req_set_15dc_out(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set 15DC out (board %u)\n", board);
+#endif
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -611,7 +632,9 @@ static HRESULT led15070_req_set_15dc_out(int board, const struct led15070_req_an
 
 static HRESULT led15070_req_set_15gs_out(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set 15GS out (board %u)\n", board);
+#endif
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -633,7 +656,9 @@ static HRESULT led15070_req_set_15gs_out(int board, const struct led15070_req_an
 
 static HRESULT led15070_req_set_psc_max(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set PSC max (board %u)\n", board);
+#endif
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -655,14 +680,16 @@ static HRESULT led15070_req_set_psc_max(int board, const struct led15070_req_any
 
 static HRESULT led15070_req_set_fet_output(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set FET output (board %u)\n", board);
+#endif
 
     led15070_per_board_vars[board].fet[0] = req->payload[0]; // R or FET0 intensity
     led15070_per_board_vars[board].fet[1] = req->payload[1]; // G or FET1 intensity
     led15070_per_board_vars[board].fet[2] = req->payload[2]; // B or FET2 intensity
 
     if (led_set_fet_output)
-        led_set_fet_output((const uint8_t*)led15070_per_board_vars[board].fet);
+        led_set_fet_output(board, (const uint8_t*)led15070_per_board_vars[board].fet);
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -685,8 +712,9 @@ static HRESULT led15070_req_set_fet_output(int board, const struct led15070_req_
 static HRESULT led15070_req_set_gs_palette(int board, const struct led15070_req_any *req)
 {
     uint8_t idx = req->payload[0];
-
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Set GS palette (board %u, index %u)\n", board, idx);
+#endif
 
     led15070_per_board_vars[board].gs_palette[idx][0] = req->payload[1]; // R
     led15070_per_board_vars[board].gs_palette[idx][1] = req->payload[2]; // G
@@ -712,10 +740,12 @@ static HRESULT led15070_req_set_gs_palette(int board, const struct led15070_req_
 
 static HRESULT led15070_req_dc_update(int board, const struct led15070_req_any *req)
 {
-    // dprintf("LED 15070: DC update (board %u)\n", board);
+#if defined(LOG_LED15070)
+    dprintf("LED 15070: DC update (board %u)\n", board);
+#endif
 
     if (led_dc_update)
-        led_dc_update((const uint8_t*)led15070_per_board_vars[board].dc);
+        led_dc_update(board, (const uint8_t*)led15070_per_board_vars[board].dc);
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -737,10 +767,12 @@ static HRESULT led15070_req_dc_update(int board, const struct led15070_req_any *
 
 static HRESULT led15070_req_gs_update(int board, const struct led15070_req_any *req)
 {
-    // dprintf("LED 15070: GS update (board %u)\n", board);
+#if defined(LOG_LED15070)
+    dprintf("LED 15070: GS update (board %u)\n", board);
+#endif
 
     if (led_gs_update)
-        led_gs_update((const uint8_t*)led15070_per_board_vars[board].gs);
+        led_gs_update(board, (const uint8_t*)led15070_per_board_vars[board].gs);
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -762,7 +794,9 @@ static HRESULT led15070_req_gs_update(int board, const struct led15070_req_any *
 
 static HRESULT led15070_req_rotate(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Rotate (board %u)\n", board);
+#endif
 
     if (!led15070_per_board_vars[board].enable_response)
         return S_OK;
@@ -787,9 +821,10 @@ static HRESULT led15070_req_set_dc_data(int board, const struct led15070_req_any
     uint8_t idx_start = req->payload[0];
     uint8_t idx_end = req->payload[1];
     uint8_t idx_skip = req->payload[2];
-
-    // dprintf("LED 15070: Set DC data (board %u, start %u, end %u, skip %u)\n",
-    //        board, idx_start, idx_end, idx_skip);
+#if defined(LOG_LED15070)
+    dprintf("LED 15070: Set DC data (board %u, start %u, end %u, skip %u)\n",
+           board, idx_start, idx_end, idx_skip);
+#endif
 
     if (idx_skip > 0 && idx_skip <= (idx_end - idx_start + 1)) {
         idx_start += idx_skip;
@@ -829,9 +864,10 @@ static HRESULT led15070_req_eeprom_write(int board, const struct led15070_req_an
 
     uint8_t addr = req->payload[0];
     uint8_t data = req->payload[1];
-
+#if defined(LOG_LED15070)
     dprintf("LED 15070: EEPROM write (board %u, address %02x, data %02x)\n",
             board, addr, data);
+#endif
 
     if (addr > 0x07) {
         dprintf("LED 15070: Error -- Invalid EEPROM write address %02x\n",
@@ -919,8 +955,9 @@ static HRESULT led15070_req_eeprom_read(int board, const struct led15070_req_any
 
     uint8_t addr = req->payload[0];
     uint8_t data = 0;
-
+#if defined(LOG_LED15070)
     dprintf("LED 15070: EEPROM read (board %u, address %02x)\n", board, addr);
+#endif
 
     if (addr > 0x07) {
         dprintf("LED 15070: Error -- Invalid EEPROM read address %02x\n",
@@ -1002,7 +1039,9 @@ static HRESULT led15070_req_eeprom_read(int board, const struct led15070_req_any
 
 static HRESULT led15070_req_ack_on(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Acknowledge commands ON (board %u)\n", board);
+#endif
 
     led15070_per_board_vars[board].enable_response = true;
 
@@ -1023,7 +1062,9 @@ static HRESULT led15070_req_ack_on(int board, const struct led15070_req_any *req
 
 static HRESULT led15070_req_ack_off(int board, const struct led15070_req_any *req)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Acknowledge commands OFF (board %u)\n", board);
+#endif
 
     led15070_per_board_vars[board].enable_response = false;
 
@@ -1044,7 +1085,9 @@ static HRESULT led15070_req_ack_off(int board, const struct led15070_req_any *re
 
 static HRESULT led15070_req_board_info(int board)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Get board info (board %u)\n", board);
+#endif
 
     struct led15070_resp_board_info resp;
 
@@ -1067,7 +1110,9 @@ static HRESULT led15070_req_board_info(int board)
 
 static HRESULT led15070_req_board_status(int board)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Get board status (board %u)\n", board);
+#endif
 
     struct led15070_resp_any resp;
 
@@ -1091,7 +1136,9 @@ static HRESULT led15070_req_board_status(int board)
 
 static HRESULT led15070_req_fw_sum(int board)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Get firmware checksum (board %u)\n", board);
+#endif
 
     struct led15070_resp_any resp;
 
@@ -1113,7 +1160,9 @@ static HRESULT led15070_req_fw_sum(int board)
 
 static HRESULT led15070_req_protocol_ver(int board)
 {
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Get protocol version (board %u)\n", board);
+#endif
 
     struct led15070_resp_any resp;
 
@@ -1187,7 +1236,7 @@ static HRESULT led15070_eeprom_open(int board, wchar_t *path, HANDLE *handle)
     HRESULT hr;
     BOOL ok;
 
-#if 0
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Opening EEPROM file '%S' handle (board %u)\n", path, board);
 #endif
 
@@ -1233,7 +1282,7 @@ static HRESULT led15070_eeprom_close(int board, wchar_t *path, HANDLE *handle)
     HRESULT hr;
     BOOL ok;
 
-#if 0
+#if defined(LOG_LED15070)
     dprintf("LED 15070: Closing EEPROM file '%S' handle (board %u)\n", path, board);
 #endif
 
diff --git a/board/led15070.h b/board/led15070.h
index a2ad863..ae237b4 100644
--- a/board/led15070.h
+++ b/board/led15070.h
@@ -7,7 +7,7 @@
 
 struct led15070_config {
     bool enable;
-    unsigned int port_no;
+    unsigned int port_no[2];
     char board_number[8];
     uint8_t fw_ver;
     uint16_t fw_sum;
@@ -15,9 +15,9 @@ struct led15070_config {
 };
 
 typedef HRESULT (*io_led_init_t)(void);
-typedef void (*io_led_set_fet_output_t)(const uint8_t *rgb);
-typedef void (*io_led_dc_update_t)(const uint8_t *rgb);
-typedef void (*io_led_gs_update_t)(const uint8_t *rgb);
+typedef void (*io_led_set_fet_output_t)(uint8_t board, const uint8_t *rgb);
+typedef void (*io_led_dc_update_t)(uint8_t board, const uint8_t *rgb);
+typedef void (*io_led_gs_update_t)(uint8_t board, const uint8_t *rgb);
 
 HRESULT led15070_hook_init(
         const struct led15070_config *cfg,
@@ -25,5 +25,4 @@ HRESULT led15070_hook_init(
         io_led_set_fet_output_t _led_set_fet_output,
         io_led_dc_update_t _led_dc_update,
         io_led_gs_update_t _led_gs_update,
-        unsigned int first_port,
-        unsigned int num_boards);
+        unsigned int port_no[2]);
diff --git a/board/led15093.c b/board/led15093.c
index a070a24..31ccb4e 100644
--- a/board/led15093.c
+++ b/board/led15093.c
@@ -107,9 +107,13 @@ static uint8_t led15093_host_adr = 1;
 static io_led_init_t led_init;
 static io_led_set_leds_t set_leds;
 
-HRESULT led15093_hook_init(const struct led15093_config *cfg, io_led_init_t _led_init,
-    io_led_set_leds_t _set_leds, unsigned int first_port, unsigned int num_boards, uint8_t board_adr, uint8_t host_adr)
+HRESULT led15093_hook_init(
+    const struct led15093_config *cfg,
+    io_led_init_t _led_init,
+    io_led_set_leds_t _set_leds,
+    unsigned int port_no[2])
 {
+    unsigned int num_boards = 0;
 
     assert(cfg != NULL);
     assert(_led_init != NULL);
@@ -119,14 +123,24 @@ HRESULT led15093_hook_init(const struct led15093_config *cfg, io_led_init_t _led
         return S_FALSE;
     }
 
-    if (cfg->port_no != 0) {
-        first_port = cfg->port_no;
+    for (int i = 0; i < led15093_nboards; i++)
+    {  
+        if (cfg->port_no[i] != 0) {
+            port_no[i] = cfg->port_no[i];
+        }
+
+        if (port_no[i] != 0) {
+            num_boards++;
+        }
     }
 
+    assert(num_boards != 0);
+
+    led15093_board_adr = num_boards;
+    led15093_host_adr = num_boards == 2 ? 1 : 2;
+
     led_init = _led_init;
     set_leds = _set_leds;
-    led15093_board_adr = board_adr;
-    led15093_host_adr = host_adr;
 
     memcpy(led15093_board_num, cfg->board_number, sizeof(led15093_board_num));
     memcpy(led15093_chip_num, cfg->chip_number, sizeof(led15093_chip_num));
@@ -140,7 +154,7 @@ HRESULT led15093_hook_init(const struct led15093_config *cfg, io_led_init_t _led
 
         InitializeCriticalSection(&vb->lock);
 
-        uart_init(&vb->boarduart, first_port + i);
+        uart_init(&vb->boarduart, port_no[i]);
         if (cfg->high_baudrate) {
             vb->boarduart.baud.BaudRate = 460800;
         } else {
@@ -209,7 +223,6 @@ static HRESULT led15093_handle_irp_locked(int board, struct irp *irp)
     _led15093_per_board_vars *v = &led15093_per_board_vars[board];
     struct uart *boarduart = &led15093_per_board_vars[board].boarduart;
 
-    /*
     if (irp->op == IRP_OP_OPEN) {
         // Unfortunately the LED board UART gets opened and closed repeatedly
 
@@ -236,30 +249,6 @@ static HRESULT led15093_handle_irp_locked(int board, struct irp *irp)
             }
         }
     }
-    */
-
-    if (irp->op == IRP_OP_OPEN) {
-        dprintf("LED 15093: Starting backend DLL\n");
-        // int res = led_init();
-        hr = led_init();
-
-        /*
-        if (res != 0) {
-            dprintf("LED 15093: Backend error, LED board disconnected: "
-                    "%d\n",
-                    res);
-
-            return E_FAIL;
-        }
-        */
-        if (FAILED(hr)) {
-            dprintf("LED 15093: Backend error, LED board disconnected: "
-                    "%x\n",
-                    (int) hr);
-
-            return hr;
-        }
-    }
 
     hr = uart_handle_irp(boarduart, irp);
 
@@ -688,16 +677,6 @@ static HRESULT led15093_req_set_imm_led(int board, const struct led15093_req_set
         return E_INVALIDARG;
     }
 
-    /*
-    if (board == 0) {
-        dprintf("board %d: red: %d, green: %d, blue: %d\n", board, req->data[0x96], req->data[0x97], req->data[0x98]);
-	}
-	else if (board == 1)
-	{
-		dprintf("board %d: red: %d, green: %d, blue: %d\n", board, req->data[0xb4], req->data[0xb5], req->data[0xb6]);
-    }
-    */
-
     // Return the current LED data, remove const qualifier
     set_leds(board, (uint8_t *) req->data);
 
diff --git a/board/led15093.h b/board/led15093.h
index 869a11b..5ff930b 100644
--- a/board/led15093.h
+++ b/board/led15093.h
@@ -8,7 +8,7 @@
 struct led15093_config {
     bool enable;
     bool high_baudrate;
-    unsigned int port_no;
+    unsigned int port_no[2];
     char board_number[8];
     char chip_number[5];
     char boot_chip_number[5];
@@ -20,5 +20,5 @@ typedef HRESULT (*io_led_init_t)(void);
 typedef void (*io_led_set_leds_t)(uint8_t board, uint8_t *rgb);
 
 HRESULT led15093_hook_init(const struct led15093_config *cfg, io_led_init_t _led_init, 
-    io_led_set_leds_t _set_leds, unsigned int first_port, unsigned int num_boards, uint8_t board_adr, uint8_t host_adr);
+    io_led_set_leds_t _set_leds, unsigned int port_no[2]);
 
diff --git a/carolhook/touch.c b/carolhook/touch.c
index 70c2e92..cf94355 100644
--- a/carolhook/touch.c
+++ b/carolhook/touch.c
@@ -196,7 +196,7 @@ static void touch_scan_auto(const bool is_pressed, const uint16_t mouse_x, const
 
         flg = resp.touches[0].x1 != last_x1 || resp.touches[0].x2 != last_x2 || resp.touches[0].y1 != last_y1 || resp.touches[0].y2 != last_y2;
 
-#if 1
+#if 0
         if (flg)
             dprintf("Touch: Mouse down! x %02X %02X y: %02X %02X\n", resp.touches[0].x1, resp.touches[0].x2, resp.touches[0].y1, resp.touches[0].y2);
 #endif
diff --git a/chunihook/config.c b/chunihook/config.c
index 2ad959e..d711fec 100644
--- a/chunihook/config.c
+++ b/chunihook/config.c
@@ -56,7 +56,8 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
     memset(cfg->boot_chip_number, ' ', sizeof(cfg->boot_chip_number));
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
-    cfg->port_no = 0;
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15093", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15093", L"portNo2", 0, filename);
     cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0x90, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xadf7, filename);
diff --git a/chunihook/dllmain.c b/chunihook/dllmain.c
index d421e23..a3fa8ab 100644
--- a/chunihook/dllmain.c
+++ b/chunihook/dllmain.c
@@ -114,8 +114,9 @@ static DWORD CALLBACK chuni_pre_startup(void)
     {
         dprintf("IO DLL doesn't support led_init/led_set_leds, cannot start LED15093 hook\n");
     } else {
+        unsigned int led_port_no[2] = {10, 11};
         hr = led15093_hook_init(&chuni_hook_cfg.led15093, 
-            chuni_dll.led_init, chuni_dll.led_set_leds, 10, 2, 2, 1);
+            chuni_dll.led_init, chuni_dll.led_set_leds, led_port_no);
 
         if (FAILED(hr)) {
             goto fail;
diff --git a/chuniio/chuniio.c b/chuniio/chuniio.c
index 614dc47..a2c0336 100644
--- a/chuniio/chuniio.c
+++ b/chuniio/chuniio.c
@@ -174,6 +174,20 @@ HRESULT chuni_io_led_init(void)
 }
 
 void chuni_io_led_set_colors(uint8_t board, uint8_t *rgb)
-{ 
+{
+#if 0
+    if (board == 0) {
+        dprintf("CHUNI LED: Left Air 1: red: %d, green: %d, blue: %d\n", rgb[0x96], rgb[0x97], rgb[0x98]);
+        dprintf("CHUNI LED: Left Air 2: red: %d, green: %d, blue: %d\n", rgb[0x99], rgb[0x9A], rgb[0x9B]);
+        dprintf("CHUNI LED: Left Air 3: red: %d, green: %d, blue: %d\n", rgb[0x9C], rgb[0x9D], rgb[0x9E]);
+	}
+	else if (board == 1)
+	{
+		dprintf("CHUNI LED: Right Air 1: red: %d, green: %d, blue: %d\n", rgb[0xB4], rgb[0xB5], rgb[0xB6]);
+        dprintf("CHUNI LED: Right Air 2: red: %d, green: %d, blue: %d\n", rgb[0xB7], rgb[0xB8], rgb[0xB9]);
+        dprintf("CHUNI LED: Right Air 3: red: %d, green: %d, blue: %d\n", rgb[0xBA], rgb[0xBB], rgb[0xBC]);
+    }
+#endif
+
     led_output_update(board, rgb);
 }
diff --git a/chusanhook/config.c b/chusanhook/config.c
index 0ec8c61..691e8f7 100644
--- a/chusanhook/config.c
+++ b/chusanhook/config.c
@@ -96,7 +96,8 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
     memset(cfg->boot_chip_number, ' ', sizeof(cfg->boot_chip_number));
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
-    cfg->port_no = 0;
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15093", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15093", L"portNo2", 0, filename);
     cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0x90, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xadf7, filename);
diff --git a/chusanhook/dllmain.c b/chusanhook/dllmain.c
index 9a2f5da..6ba4cd4 100644
--- a/chusanhook/dllmain.c
+++ b/chusanhook/dllmain.c
@@ -22,27 +22,23 @@
     COM4:   837-15396 "Gen 3" Aime Reader
 */
 
-#include <windows.h>
-
 #include <stddef.h>
 #include <stdlib.h>
-
-#include "amex/amex.h"
+#include <windows.h>
 
 #include "board/sg-reader.h"
 #include "board/vfd.h"
 
+#include "chuniio/chuniio.h"
 #include "chusanhook/config.h"
 #include "chusanhook/io4.h"
 #include "chusanhook/slider.h"
 
-#include "chuniio/chuniio.h"
-
-#include "hook/process.h"
-
 #include "gfxhook/d3d9.h"
 #include "gfxhook/gfx.h"
 
+#include "hook/process.h"
+
 #include "hooklib/serial.h"
 #include "hooklib/spike.h"
 
@@ -55,8 +51,7 @@ static HMODULE chusan_hook_mod;
 static process_entry_t chusan_startup;
 static struct chusan_hook_config chusan_hook_cfg;
 
-static DWORD CALLBACK chusan_pre_startup(void)
-{
+static DWORD CALLBACK chusan_pre_startup(void) {
     HMODULE d3dc;
     HMODULE dbghelp;
     HRESULT hr;
@@ -88,7 +83,7 @@ static DWORD CALLBACK chusan_pre_startup(void)
     chusan_hook_config_load(&chusan_hook_cfg, get_config_path());
 
     /* Hook Win32 APIs */
-    
+
     dvd_hook_init(&chusan_hook_cfg.dvd, chusan_hook_mod);
     gfx_hook_init(&chusan_hook_cfg.gfx);
     gfx_d3d9_hook_init(&chusan_hook_cfg.gfx, chusan_hook_mod);
@@ -96,6 +91,16 @@ static DWORD CALLBACK chusan_pre_startup(void)
 
     /* Initialize emulation hooks */
 
+    struct dipsw_config new_dipsw_config[8] = {
+        {L"Delivery Server", L"Server", L"Client"},
+        {L"Monitor Type", L"60FPS", L"120FPS"},
+        {L"Cabinet Type", L"CVT", L"SP"},
+    };
+
+    // Set the system dip switch configuration
+    memcpy(chusan_hook_cfg.platform.system.dipsw_config, new_dipsw_config,
+           sizeof(new_dipsw_config));
+
     hr = platform_hook_init(
         &chusan_hook_cfg.platform,
         "SDHD",
@@ -124,27 +129,7 @@ static DWORD CALLBACK chusan_pre_startup(void)
         goto fail;
     }
 
-    bool *dipsw = &chusan_hook_cfg.platform.system.dipsw[0];
-    bool is_cvt = dipsw[2];
-
-    for (int i = 0; i < 3; i++) {
-        switch (i) {
-        case 0:
-            dprintf("DipSw: NetInstall: %s\n", dipsw[0] ? "Server" : "Client");
-            break;
-
-        case 1:
-            dprintf("DipSw: Monitor Type: %dFPS\n", dipsw[1] ? 60 : 120);
-            break;
-
-        case 2:
-            dprintf("DipSw: Cab Type: %s\n", is_cvt ? "CVT" : "SP");
-
-            break;
-        }
-    }
-
-    unsigned int first_port = is_cvt ? 2 : 20;
+    bool is_cvt = chusan_hook_cfg.platform.system.dipsw[2];
 
     if (!is_cvt) {
         hr = vfd_hook_init(&chusan_hook_cfg.vfd, 2);
@@ -154,19 +139,31 @@ static DWORD CALLBACK chusan_pre_startup(void)
         }
     }
 
-    if ( chuni_dll.led_init == NULL || chuni_dll.led_set_leds == NULL )
-    {
-        dprintf("IO DLL doesn't support led_init/led_set_leds, cannot start LED15093 hook\n");
+    unsigned int led_port_no[2];
+
+    if (is_cvt) {
+        led_port_no[0] = 2;
+        led_port_no[1] = 3;
     } else {
-        hr = led15093_hook_init(&chusan_hook_cfg.led15093, 
-            chuni_dll.led_init, chuni_dll.led_set_leds, first_port, 2, 2, 1);
+        led_port_no[0] = 20;
+        led_port_no[1] = 21;
+    }
+
+    if (chuni_dll.led_init == NULL || chuni_dll.led_set_leds == NULL) {
+        dprintf(
+            "IO DLL doesn't support led_init/led_set_leds, cannot start "
+            "LED15093 hook\n");
+    } else {
+        hr = led15093_hook_init(&chusan_hook_cfg.led15093, chuni_dll.led_init,
+                                chuni_dll.led_set_leds, led_port_no);
 
         if (FAILED(hr)) {
             goto fail;
         }
     }
 
-    hr = sg_reader_hook_init(&chusan_hook_cfg.aime, 4, is_cvt ? 2: 3, chusan_hook_mod);
+    hr = sg_reader_hook_init(&chusan_hook_cfg.aime, 4, is_cvt ? 2 : 3,
+                             chusan_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
@@ -186,8 +183,7 @@ fail:
     ExitProcess(EXIT_FAILURE);
 }
 
-BOOL WINAPI DllMain(HMODULE mod, DWORD cause, void *ctx)
-{
+BOOL WINAPI DllMain(HMODULE mod, DWORD cause, void *ctx) {
     HRESULT hr;
 
     if (cause != DLL_PROCESS_ATTACH) {
@@ -199,7 +195,7 @@ BOOL WINAPI DllMain(HMODULE mod, DWORD cause, void *ctx)
     hr = process_hijack_startup(chusan_pre_startup, &chusan_startup);
 
     if (!SUCCEEDED(hr)) {
-        dprintf("Failed to hijack process startup: %x\n", (int) hr);
+        dprintf("Failed to hijack process startup: %x\n", (int)hr);
     }
 
     return SUCCEEDED(hr);
diff --git a/cmhook/dllmain.c b/cmhook/dllmain.c
index 03ace58..29d93af 100644
--- a/cmhook/dllmain.c
+++ b/cmhook/dllmain.c
@@ -63,6 +63,14 @@ static DWORD CALLBACK cm_pre_startup(void)
 
     /* Initialize emulation hooks */
 
+    struct dipsw_config new_dipsw_config[8] = {
+        {L"Delivery Server", L"Client", L"Server"},
+    };
+
+    // Set the system dip switch configuration
+    memcpy(cm_hook_cfg.platform.system.dipsw_config, new_dipsw_config,
+           sizeof(new_dipsw_config));
+
     hr = platform_hook_init(
             &cm_hook_cfg.platform,
             "SDED",
diff --git a/dist/carol/start.bat b/dist/carol/launch.bat
similarity index 80%
rename from dist/carol/start.bat
rename to dist/carol/launch.bat
index 0fab950..4e75aa0 100644
--- a/dist/carol/start.bat
+++ b/dist/carol/launch.bat
@@ -2,10 +2,10 @@
 
 pushd %~dp0
 
-taskkill /f /im aimeReaderHost.exe > nul 2>&1
-
 start /min inject -d -k carolhook.dll aimeReaderHost.exe -p 10
+
 inject -d -k carolhook.dll carol_nu.exe
+
 taskkill /f /im aimeReaderHost.exe > nul 2>&1
 
 echo.
diff --git a/dist/chuni/start.bat b/dist/chuni/launch.bat
similarity index 96%
rename from dist/chuni/start.bat
rename to dist/chuni/launch.bat
index 0c942e9..a1c54ef 100644
--- a/dist/chuni/start.bat
+++ b/dist/chuni/launch.bat
@@ -3,7 +3,9 @@
 pushd %~dp0
 
 start /min inject -d -k chunihook.dll aimeReaderHost.exe -p 12
+
 inject -d -k chunihook.dll chuniApp.exe
+
 taskkill /f /im aimeReaderHost.exe > nul 2>&1
 
 echo.
diff --git a/dist/chusan/start.bat b/dist/chusan/launch.bat
similarity index 100%
rename from dist/chusan/start.bat
rename to dist/chusan/launch.bat
diff --git a/dist/cm/start.bat b/dist/cm/launch.bat
similarity index 100%
rename from dist/cm/start.bat
rename to dist/cm/launch.bat
diff --git a/dist/cxb/start.bat b/dist/cxb/launch.bat
similarity index 100%
rename from dist/cxb/start.bat
rename to dist/cxb/launch.bat
diff --git a/dist/cxb/segatools.ini b/dist/cxb/segatools.ini
index 1fe70c8..40589de 100644
--- a/dist/cxb/segatools.ini
+++ b/dist/cxb/segatools.ini
@@ -60,7 +60,7 @@ enable=1
 subnet=192.168.150.0
 billingCa=../DEVICE/ca.crt
 billingPub=../DEVICE/billing.pub
-billingType=2
+billingType=0
 
 [eeprom]
 ; See above
diff --git a/dist/diva/start.bat b/dist/diva/launch.bat
similarity index 100%
rename from dist/diva/start.bat
rename to dist/diva/launch.bat
diff --git a/dist/fgo/start.bat b/dist/fgo/launch.bat
similarity index 100%
rename from dist/fgo/start.bat
rename to dist/fgo/launch.bat
diff --git a/dist/fgo/segatools.ini b/dist/fgo/segatools.ini
index e9c7c20..4e846ee 100644
--- a/dist/fgo/segatools.ini
+++ b/dist/fgo/segatools.ini
@@ -41,7 +41,7 @@ portNo=17
 ; 837-15093-06 LED board emulation setting.
 enable=1
 ; COM port number for the LED board. Has to be the same as the FTDI port.
-portNo=17
+portNo1=17
 
 ; -----------------------------------------------------------------------------
 ; Network settings
diff --git a/dist/idac/start.bat b/dist/idac/launch.bat
similarity index 100%
rename from dist/idac/start.bat
rename to dist/idac/launch.bat
diff --git a/dist/idz/start.bat b/dist/idz/launch.bat
similarity index 87%
rename from dist/idz/start.bat
rename to dist/idz/launch.bat
index d64aa9b..4f6ea5e 100644
--- a/dist/idz/start.bat
+++ b/dist/idz/launch.bat
@@ -2,7 +2,7 @@
 
 pushd %~dp0
 
-start /min "AM Daemon" inject -d -k idzhook.dll amdaemon.exe -c configDHCP_Final_Common.json configDHCP_Final_JP.json configDHCP_Final_JP_ST1.json configDHCP_Final_JP_ST2.json configDHCP_Final_EX.json configDHCP_Final_EX_ST1.json configDHCP_Final_EX_ST2.json
+start "AM Daemon" /min inject -d -k idzhook.dll amdaemon.exe -c configDHCP_Final_Common.json configDHCP_Final_JP.json configDHCP_Final_JP_ST1.json configDHCP_Final_JP_ST2.json configDHCP_Final_EX.json configDHCP_Final_EX_ST1.json configDHCP_Final_EX_ST2.json
 
 rem Set dipsw1=0 and uncomment the ServerBox for in store battle?
 rem inject -k idzhook.dll ServerBoxD8_Nu_x64.exe
diff --git a/dist/kemono/start.bat b/dist/kemono/launch.bat
similarity index 100%
rename from dist/kemono/start.bat
rename to dist/kemono/launch.bat
diff --git a/dist/mai2/start.bat b/dist/mai2/launch.bat
similarity index 100%
rename from dist/mai2/start.bat
rename to dist/mai2/launch.bat
diff --git a/dist/mai2/segatools.ini b/dist/mai2/segatools.ini
index c253334..dde853f 100644
--- a/dist/mai2/segatools.ini
+++ b/dist/mai2/segatools.ini
@@ -69,6 +69,15 @@ freeplay=0
 ; this to 1 on exactly one machine and set this to 0 on all others.
 dipsw1=1
 
+; -----------------------------------------------------------------------------
+; LED settings
+; -----------------------------------------------------------------------------
+
+[led15070]
+; Enable emulation of the 837-15070-04 controlled lights, which handle the
+; cabinet and button LEDs.
+enable=1
+
 ; -----------------------------------------------------------------------------
 ; Misc. hook settings
 ; -----------------------------------------------------------------------------
@@ -126,11 +135,22 @@ coin=0x72
 ; Uncomment and complete the following sequence of settings to configure a
 ; custom keybinding.
 [button]
-;1p_btn1=0x53
-;1p_btn2=0x53
-;1p_btn3=0x53
+enable=1
+;p1Btn1=0x53
+;p1Btn2=0x53
+;p1Btn3=0x53
 ; ... etc ...
-;2p_btn1=0x53
-;2p_btn2=0x53
-;2p_btn3=0x53
+;p2Btn1=0x53
+;p2Btn2=0x53
+;p2Btn3=0x53
 ; ... etc ...
+
+[touch]
+p1Enable=1
+;p1DebugInput=0
+p2Enable=1
+;p2DebugInput=0
+;p1TouchA1=0x53
+;p1TouchA2=0x53
+; ... etc ...
+;p1TouchE8=0x53
diff --git a/dist/mercury/start.bat b/dist/mercury/launch.bat
similarity index 55%
rename from dist/mercury/start.bat
rename to dist/mercury/launch.bat
index a9a3f22..4a64365 100644
--- a/dist/mercury/start.bat
+++ b/dist/mercury/launch.bat
@@ -1,10 +1,8 @@
 @echo off
 pushd %~dp0
 
-taskkill /f /im amdaemon.exe > nul 2>&1
-
 REM USA
-start "AM Daemon" /min inject -d -k mercuryhook.dll amdaemon.exe -f -c config.json config_lan_install_client.json config_lan_install_server.json config_video_clone.json config_video_dual.json config_video_clone_flip.json config_video_dual_flip.json config_region_exp.json config_region_chn.json config_region_usa.json
+REM start "AM Daemon" /min inject -d -k mercuryhook.dll amdaemon.exe -f -c config.json config_lan_install_client.json config_lan_install_server.json config_video_clone.json config_video_dual.json config_video_clone_flip.json config_video_dual_flip.json config_region_exp.json config_region_chn.json config_region_usa.json
 
 REM JP
 start "AM Daemon" /min inject -d -k mercuryhook.dll amdaemon.exe -f -c config.json config_lan_install_client.json config_lan_install_server.json config_video_clone.json config_video_dual.json config_video_clone_flip.json config_video_dual_flip.json config_region_exp.json config_region_chn.json config_region_jpn.json
diff --git a/dist/mercury/segatools.ini b/dist/mercury/segatools.ini
index 4e24489..5e10634 100644
--- a/dist/mercury/segatools.ini
+++ b/dist/mercury/segatools.ini
@@ -5,7 +5,7 @@
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
-; Insert the path to the game Option directory here (contains Axxx directories)
+; Insert the path to the game Option directory here (unused in Mercury)
 option=
 ; Create an empty directory somewhere and insert the path here.
 ; This directory may be shared between multiple SEGA games.
diff --git a/dist/mu3/start.bat b/dist/mu3/launch.bat
similarity index 100%
rename from dist/mu3/start.bat
rename to dist/mu3/launch.bat
diff --git a/dist/swdc/start.bat b/dist/swdc/launch.bat
similarity index 100%
rename from dist/swdc/start.bat
rename to dist/swdc/launch.bat
diff --git a/dist/tokyo/start.bat b/dist/tokyo/launch.bat
similarity index 100%
rename from dist/tokyo/start.bat
rename to dist/tokyo/launch.bat
diff --git a/doc/chunihook.md b/doc/chunihook.md
index 57e19b0..7b68a20 100644
--- a/doc/chunihook.md
+++ b/doc/chunihook.md
@@ -44,7 +44,7 @@ option=../../option
 1. In the `[dns]` section, set `default=` to your computer's hostname or LAN IP. Do not put
 `127.0.0.1` here, the game specifically checks for and rejects loopback addresses. This setting
 controls the address of the network services server
-1. Right click `start.bat` in `app/bin` and run it as Administrator. I think you need to run it as
+1. Right click `launch.bat` in `app/bin` and run it as Administrator. I think you need to run it as
 admin at least once, but once you have done that you can run the game as a regular user
 1. A sequence of several start-up screens will be displayed. You should also see a bunch of debug
 output in a command line window; if you're seeing hex dumps here then that's a good sign. There
diff --git a/doc/config/common.md b/doc/config/common.md
index 2796ded..89c48c6 100644
--- a/doc/config/common.md
+++ b/doc/config/common.md
@@ -11,7 +11,7 @@ The default file path for config file is `./segatools.ini`.
 
 You can modify environment variable `SEGATOOLS_CONFIG_PATH` to another path.
 
-For example, You can have another `start.bat` with following code in it,
+For example, You can have another `launch.bat` with following code in it,
 Then you can copy `segatools.ini` to `another_config.ini` but with different dns host in it
 ```bat
 set SEGATOOLS_CONFIG_PATH=.\another_config.ini
@@ -420,18 +420,22 @@ Default: (Varies depending on game)
 
 Override the game's four-character platform code (e.g. `AAV2` for Nu 2). This
 is actually supposed to be a separate three-character `platformId` and
-integer `modelType` setting, but they are combined here for convenience. Valid
-values include:
+integer `modelType` setting, but they are combined here for convenience.
 
-- `AAV0`: Nu 1 (Project DIVA)
-- `AAV1`: Nu 1.1 (Chunithm)
-- `AAV2`: Nu 2 (Initial D Zero)
-- `AAW0`: NuSX 1
-- `AAW1`: NuSX 1.1
-- `ACA0`: ALLS UX
-- `ACA1`: ALLS HX
-- `ACA2`: ALLS UX (without dedicated GPU)
-- `ACA4`: ALLS MX
+`platformId` is one of the following:
+- `AAV`: Nu 1/1.1/2
+- `AAW`: NuSX 1/1.1
+- `ACA`: ALLS UX/HX/MX
+
+`modelType` is one of the following:
+- `1`: Server (SV) 
+- `2`: Satalite (ST) 
+- `3`: Live (LV) 
+- `4`: Terminal (TN)
+
+It's safe to assume that every game you'll be playing with these tools will be a Satalite.
+Some games care, others don't. Some even change how they run based on this value (Wonderland Wars
+will boot into terminal mode if `modelType` is 4).
 
 ### `region`
 
@@ -468,15 +472,9 @@ the billing transactions.
 
 Default: `1`
 
-Set the billing "type" for the keychip. The type determins what kind of revenue share,
-if any, the game maker has with SEGA. Some games may be picky and require types other 
-then 1 (ex. crossbeats REV. requires billing type 2), so this option is provided if this
-is an issue. Billing types are:
-
-- 0: No billing?
-- 1: Billing type A
-- 2: Billing type B1
-- 3: Billing type B2
+Sets the billing type, a single bit value that flags the cabinet as a rental if set to `1`, or `0` otherwise.
+Certian games that were only sold officially as full purchases (that is, non-rentals) must have this value set to 0.
+NOTE: Crossbeats erroniously displays Billing modes A/B1/B2, but this value comes from the `modelType` and NOT this value!
 
 ### `systemFlag`
 
diff --git a/doc/idzhook.md b/doc/idzhook.md
index e23c18c..1686458 100644
--- a/doc/idzhook.md
+++ b/doc/idzhook.md
@@ -65,7 +65,7 @@ felicaGen=0
   and fill it with 20 digits, for example `01234567891234567890`. Make sure to
   save the file.
 
-1. Right click `start.bat` in `package` and run it as Administrator. After the
+1. Right click `launch.bat` in `package` and run it as Administrator. After the
    first run you may be able to run the game as a normal user.
 1. Once you're at the title screen, press 2 or 3 a few times to add some
    credits, then _hold_ the Enter key for a few seconds to scan a card and start
diff --git a/fgohook/config.c b/fgohook/config.c
index 30dbf86..766240c 100644
--- a/fgohook/config.c
+++ b/fgohook/config.c
@@ -48,7 +48,8 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
     memset(cfg->boot_chip_number, ' ', sizeof(cfg->boot_chip_number));
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
-    cfg->port_no = GetPrivateProfileIntW(L"led15093", L"portNo", 0, filename);
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15093", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15093", L"portNo2", 0, filename);
     cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0xA0, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xAA53, filename);
diff --git a/fgohook/dllmain.c b/fgohook/dllmain.c
index e82423f..a65cbcd 100644
--- a/fgohook/dllmain.c
+++ b/fgohook/dllmain.c
@@ -133,8 +133,9 @@ static DWORD CALLBACK fgo_pre_startup(void)
         goto fail;
     }
 
+    unsigned int led_port_no[2] = {17, 0};
     hr = led15093_hook_init(&fgo_hook_cfg.led15093, 
-        fgo_dll.led_init, fgo_dll.led_set_leds, 17, 1, 1, 2);
+        fgo_dll.led_init, fgo_dll.led_set_leds, led_port_no);
 
     if (FAILED(hr)) {
         goto fail;
diff --git a/hooklib/meson.build b/hooklib/meson.build
index e6908d6..b0ad6c2 100644
--- a/hooklib/meson.build
+++ b/hooklib/meson.build
@@ -4,7 +4,7 @@ hooklib_lib = static_library(
     implicit_include_directories : false,
     dependencies : [
         capnhook.get_variable('hook_dep'),
-        Ws2_32_lib
+        ws2_32_lib
     ],
     sources : [
         'cursor.c',
diff --git a/hooklib/reg.c b/hooklib/reg.c
index bc18dbb..d4a3bc3 100644
--- a/hooklib/reg.c
+++ b/hooklib/reg.c
@@ -308,7 +308,7 @@ static void reg_hook_init(void)
 
     reg_hook_initted = true;
     InitializeCriticalSection(&reg_hook_lock);
-    dprintf("Reg hook init\n");
+    dprintf("Reg: hook init.\n");
 
     reg_hook_insert_hooks(NULL);
 
diff --git a/idachook/config.c b/idachook/config.c
index 279aba7..0e8dc88 100644
--- a/idachook/config.c
+++ b/idachook/config.c
@@ -23,7 +23,8 @@ void led15070_config_load(struct led15070_config *cfg, const wchar_t *filename)
     wchar_t tmpstr[16];
 
     cfg->enable = GetPrivateProfileIntW(L"led15070", L"enable", 1, filename);
-    cfg->port_no = GetPrivateProfileIntW(L"led15070", L"portNo", 0, filename);
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15070", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15070", L"portNo2", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15070", L"fwVer", 0x90, filename);
     /* TODO: Unknown, no firmware file available */
     cfg->fw_sum = GetPrivateProfileIntW(L"led15070", L"fwSum", 0x0000, filename);
diff --git a/idachook/dllmain.c b/idachook/dllmain.c
index 0e955e8..448ea5b 100644
--- a/idachook/dllmain.c
+++ b/idachook/dllmain.c
@@ -60,6 +60,18 @@ static DWORD CALLBACK idac_pre_startup(void)
 
     /* Initialize emulation hooks */
 
+    struct dipsw_config new_dipsw_config[8] = {
+        {L"Delivery Server", L"Server", L"Client"},
+        {L"Cabinet Type", L"SWDC CVT", L"DZero CVT"},
+        {L"Single Seat", L"ON", L"OFF"},
+        {L"Seat Setting 1", L"ON", L"OFF"},
+        {L"Seat Setting 2", L"ON", L"OFF"},
+    };
+
+    // Set the system dip switch configuration
+    memcpy(idac_hook_cfg.platform.system.dipsw_config, new_dipsw_config,
+           sizeof(new_dipsw_config));
+
     hr = platform_hook_init(
             &idac_hook_cfg.platform,
             "SDGT",
@@ -70,13 +82,21 @@ static DWORD CALLBACK idac_pre_startup(void)
         goto fail;
     }
 
+    bool *dipsw = &idac_hook_cfg.platform.system.dipsw[0];
+    bool is_swdc_cvt = dipsw[1];
+
+    if (!dipsw[2]) {
+        // the next two bit are the seat number most significant bit first
+        dprintf("System: Seat Number: %d\n", ((dipsw[4] << 1) | dipsw[3]) + 1);
+    }
+
     hr = idac_dll_init(&idac_hook_cfg.dll, idac_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
     }
 
-    hr = sg_reader_hook_init(&idac_hook_cfg.aime, 3, 3, idac_hook_mod);
+    hr = sg_reader_hook_init(&idac_hook_cfg.aime, 3, is_swdc_cvt ? 3 : 2, idac_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
@@ -94,8 +114,9 @@ static DWORD CALLBACK idac_pre_startup(void)
         goto fail;
     }
 
+    unsigned int led_port_no[2] = {2, 0};
     hr = led15070_hook_init(&idac_hook_cfg.led15070, idac_dll.led_init, 
-        idac_dll.led_set_fet_output, NULL, idac_dll.led_gs_update, 2, 1);
+        idac_dll.led_set_fet_output, NULL, idac_dll.led_gs_update, led_port_no);
 
     if (FAILED(hr)) {
         goto fail;
diff --git a/idachook/idac-dll.h b/idachook/idac-dll.h
index 88ac299..92aa664 100644
--- a/idachook/idac-dll.h
+++ b/idachook/idac-dll.h
@@ -12,9 +12,9 @@ struct idac_dll {
     void (*get_shifter)(uint8_t *gear);
     void (*get_analogs)(struct idac_io_analog_state *out);
     HRESULT (*led_init)(void);
-    void (*led_set_fet_output)(const uint8_t *rgb);
-    void (*led_gs_update)(const uint8_t *rgb);
-    void (*led_set_leds)(const uint8_t *rgb);
+    void (*led_set_fet_output)(uint8_t board, const uint8_t *rgb);
+    void (*led_gs_update)(uint8_t board, const uint8_t *rgb);
+    void (*led_set_leds)(uint8_t board, const uint8_t *rgb);
     HRESULT (*ffb_init)(void);
     void (*ffb_toggle)(bool active);
     void (*ffb_constant_force)(uint8_t direction, uint8_t force);
diff --git a/idachook/io4.c b/idachook/io4.c
index 1e4d990..3861ef8 100644
--- a/idachook/io4.c
+++ b/idachook/io4.c
@@ -159,7 +159,7 @@ static HRESULT idac_io4_write_gpio(uint8_t* payload, size_t len)
         lights_data & IDAC_IO_LED_LEFT ? 0xFF : 0x00,
     };
 
-    idac_dll.led_set_leds(rgb_out);
+    idac_dll.led_set_leds(0, rgb_out);
 
     return S_OK;
 }
diff --git a/idacio/dllmain.c b/idacio/dllmain.c
index 6a5dba8..fe8246e 100644
--- a/idacio/dllmain.c
+++ b/idacio/dllmain.c
@@ -127,7 +127,7 @@ HRESULT idac_io_led_init(void)
     return S_OK;
 }
 
-void idac_io_led_set_fet_output(const uint8_t *rgb)
+void idac_io_led_set_fet_output(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     dprintf("IDAC LED: LEFT SEAT LED: %02X\n", rgb[0]);
@@ -137,7 +137,7 @@ void idac_io_led_set_fet_output(const uint8_t *rgb)
     return;
 }
 
-void idac_io_led_gs_update(const uint8_t *rgb)
+void idac_io_led_gs_update(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     for (int i = 0; i < 9; i++) {
@@ -149,7 +149,7 @@ void idac_io_led_gs_update(const uint8_t *rgb)
     return;
 }
 
-void idac_io_led_set_leds(const uint8_t *rgb)
+void idac_io_led_set_leds(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     dprintf("IDAC LED: START: %02X\n", rgb[0]);
diff --git a/idacio/idacio.h b/idacio/idacio.h
index 513c9d1..bc58a34 100644
--- a/idacio/idacio.h
+++ b/idacio/idacio.h
@@ -127,7 +127,7 @@ HRESULT idac_io_led_init(void);
 
    Minimum API version: 0x0101 */
 
-void idac_io_led_set_fet_output(const uint8_t *rgb);
+void idac_io_led_set_fet_output(uint8_t board, const uint8_t *rgb);
 
 /* Update the RGB LEDs. rgb is a pointer to an array up to 32 * 4 = 128 bytes. 
 
@@ -144,7 +144,7 @@ void idac_io_led_set_fet_output(const uint8_t *rgb);
 
    Minimum API version: 0x0101 */
 
-void idac_io_led_gs_update(const uint8_t *rgb);
+void idac_io_led_gs_update(uint8_t board, const uint8_t *rgb);
 
 /* Update the cabinet button LEDs. rgb is a pointer to an array up to 6 bytes.
 
@@ -160,7 +160,7 @@ void idac_io_led_gs_update(const uint8_t *rgb);
 
    Minimum API version: 0x0101 */
 
-void idac_io_led_set_leds(const uint8_t *rgb);
+void idac_io_led_set_leds(uint8_t board, const uint8_t *rgb);
 
 /* Initialize FFB emulation. This function will be called before any
    other idac_io_ffb_*() function calls.
diff --git a/idzhook/config.c b/idzhook/config.c
index 0378cbe..6bbc0ed 100644
--- a/idzhook/config.c
+++ b/idzhook/config.c
@@ -27,7 +27,8 @@ void led15070_config_load(struct led15070_config *cfg, const wchar_t *filename)
     wchar_t tmpstr[16];
 
     cfg->enable = GetPrivateProfileIntW(L"led15070", L"enable", 1, filename);
-    cfg->port_no = GetPrivateProfileIntW(L"led15070", L"portNo", 0, filename);
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15070", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15070", L"portNo2", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15070", L"fwVer", 0x90, filename);
     /* TODO: Unknown, no firmware file available */
     cfg->fw_sum = GetPrivateProfileIntW(L"led15070", L"fwSum", 0x0000, filename);
diff --git a/idzhook/dllmain.c b/idzhook/dllmain.c
index edf6cbb..534f4d0 100644
--- a/idzhook/dllmain.c
+++ b/idzhook/dllmain.c
@@ -128,8 +128,9 @@ static DWORD CALLBACK idz_pre_startup(void)
         goto fail;
     }
 
+    unsigned int led_port_no[2] = {11, 0};
     hr = led15070_hook_init(&idz_hook_cfg.led15070, idz_dll.led_init, 
-        idz_dll.led_set_fet_output, NULL, idz_dll.led_gs_update, 11, 1);
+        idz_dll.led_set_fet_output, NULL, idz_dll.led_gs_update, led_port_no);
 
     if (FAILED(hr)) {
         goto fail;
diff --git a/idzhook/idz-dll.h b/idzhook/idz-dll.h
index e827f8e..4084d84 100644
--- a/idzhook/idz-dll.h
+++ b/idzhook/idz-dll.h
@@ -12,9 +12,9 @@ struct idz_dll {
     void (*jvs_read_shifter)(uint8_t *gear);
     void (*jvs_read_coin_counter)(uint16_t *total);
     HRESULT (*led_init)(void);
-    void (*led_set_fet_output)(const uint8_t *rgb);
-    void (*led_gs_update)(const uint8_t *rgb);
-    void (*led_set_leds)(const uint8_t *rgb);
+    void (*led_set_fet_output)(uint8_t board, const uint8_t *rgb);
+    void (*led_gs_update)(uint8_t board, const uint8_t *rgb);
+    void (*led_set_leds)(uint8_t board, const uint8_t *rgb);
     HRESULT (*ffb_init)(void);
     void (*ffb_toggle)(bool active);
     void (*ffb_constant_force)(uint8_t direction, uint8_t force);
diff --git a/idzhook/jvs.c b/idzhook/jvs.c
index 3531d55..2ded71c 100644
--- a/idzhook/jvs.c
+++ b/idzhook/jvs.c
@@ -192,5 +192,5 @@ static void idz_jvs_write_gpio(void *ctx, uint32_t state)
         state & IDZ_IO_LED_LEFT ? 0xFF : 0x00,
     };
 
-    idz_dll.led_set_leds(rgb_out);
+    idz_dll.led_set_leds(0, rgb_out);
 }
diff --git a/idzio/dllmain.c b/idzio/dllmain.c
index 39d08fc..322d194 100644
--- a/idzio/dllmain.c
+++ b/idzio/dllmain.c
@@ -130,7 +130,7 @@ HRESULT idz_io_led_init(void)
     return S_OK;
 }
 
-void idz_io_led_set_fet_output(const uint8_t *rgb)
+void idz_io_led_set_fet_output(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     dprintf("IDZ LED: LEFT SEAT LED: %02X\n", rgb[0]);
@@ -140,7 +140,7 @@ void idz_io_led_set_fet_output(const uint8_t *rgb)
     return;
 }
 
-void idz_io_led_gs_update(const uint8_t *rgb)
+void idz_io_led_gs_update(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     for (int i = 0; i < 9; i++) {
@@ -152,7 +152,7 @@ void idz_io_led_gs_update(const uint8_t *rgb)
     return;
 }
 
-void idz_io_led_set_leds(const uint8_t *rgb)
+void idz_io_led_set_leds(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     dprintf("IDZ LED: START: %02X\n", rgb[0]);
diff --git a/idzio/idzio.h b/idzio/idzio.h
index 8fd01d8..db64c44 100644
--- a/idzio/idzio.h
+++ b/idzio/idzio.h
@@ -138,7 +138,7 @@ HRESULT idz_io_led_init(void);
 
    Minimum API version: 0x0101 */
 
-void idz_io_led_set_fet_output(const uint8_t *rgb);
+void idz_io_led_set_fet_output(uint8_t board, const uint8_t *rgb);
 
 /* Update the RGB LEDs. rgb is a pointer to an array up to 32 * 4 = 128 bytes. 
 
@@ -155,7 +155,7 @@ void idz_io_led_set_fet_output(const uint8_t *rgb);
 
    Minimum API version: 0x0101 */
 
-void idz_io_led_gs_update(const uint8_t *rgb);
+void idz_io_led_gs_update(uint8_t board, const uint8_t *rgb);
 
 /* Update the cabinet button LEDs. rgb is a pointer to an array up to 6 bytes.
 
@@ -171,7 +171,7 @@ void idz_io_led_gs_update(const uint8_t *rgb);
 
    Minimum API version: 0x0101 */
 
-void idz_io_led_set_leds(const uint8_t *rgb);
+void idz_io_led_set_leds(uint8_t board, const uint8_t *rgb);
 
 /* Initialize FFB emulation. This function will be called before any
    other idz_io_ffb_*() function calls.
diff --git a/kemonohook/config.c b/kemonohook/config.c
index ec00aa1..c008d88 100644
--- a/kemonohook/config.c
+++ b/kemonohook/config.c
@@ -65,7 +65,8 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
     memset(cfg->boot_chip_number, ' ', sizeof(cfg->boot_chip_number));
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
-    cfg->port_no = GetPrivateProfileIntW(L"led15093", L"portNo", 0, filename);
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15093", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15093", L"portNo2", 1, filename);
     cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0xA0, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xAA53, filename);
diff --git a/kemonohook/dllmain.c b/kemonohook/dllmain.c
index 83a4290..3373489 100644
--- a/kemonohook/dllmain.c
+++ b/kemonohook/dllmain.c
@@ -1,28 +1,21 @@
-#include <windows.h>
-
 #include <stdlib.h>
+#include <windows.h>
 
 #include "board/io4.h"
 #include "board/sg-reader.h"
 #include "board/vfd.h"
-
+#include "hook/iohook.h"
 #include "hook/process.h"
 #include "hook/table.h"
-#include "hook/iohook.h"
-
 #include "hooklib/printer.h"
 #include "hooklib/serial.h"
 #include "hooklib/spike.h"
-
 #include "kemonohook/config.h"
 #include "kemonohook/hooks.h"
 #include "kemonohook/jvs.h"
 #include "kemonohook/kemono-dll.h"
-
 #include "platform/platform.h"
-
 #include "unityhook/hook.h"
-
 #include "util/dprintf.h"
 #include "util/env.h"
 
@@ -47,29 +40,38 @@ static DWORD CALLBACK kemono_pre_startup(void) {
 
     // 2.02 does not call printer update functions
     uint16_t ret;
-    fwdlusb_updateFirmware_main(1, "UnityApp\\Parade_Data\\StreamingAssets\\Printer\\E0223100-014E-C300-MAINAPP.BIN", &ret);
-    if (ret != 0){
+    fwdlusb_updateFirmware_main(
+        1,
+        "UnityApp\\Parade_Data\\StreamingAssets\\Printer\\E0223100-014E-C300-"
+        "MAINAPP.BIN",
+        &ret);
+    if (ret != 0) {
         goto fail;
     }
-    fwdlusb_updateFirmware_dsp(2, "UnityApp\\Parade_Data\\StreamingAssets\\Printer\\E0223200-0101-C300-DSPAPP.BIN", &ret);
-    if (ret != 0){
+    fwdlusb_updateFirmware_dsp(
+        2,
+        "UnityApp\\Parade_Data\\StreamingAssets\\Printer\\E0223200-0101-C300-"
+        "DSPAPP.BIN",
+        &ret);
+    if (ret != 0) {
         goto fail;
     }
-    fwdlusb_updateFirmware_param(3, "UnityApp\\Parade_Data\\StreamingAssets\\Printer\\D0460700-0101-C300-PARAM.BIN", &ret);
-    if (ret != 0){
+    fwdlusb_updateFirmware_param(
+        3,
+        "UnityApp\\Parade_Data\\StreamingAssets\\Printer\\D0460700-0101-C300-"
+        "PARAM.BIN",
+        &ret);
+    if (ret != 0) {
         goto fail;
     }
 
     printer_hook_init(&kemono_hook_cfg.printer, 0, kemono_hook_mod);
-    printer_set_dimensions(720, 1028); // printer doesn't call setimageformat
+    printer_set_dimensions(720, 1028);  // printer doesn't call setimageformat
 
     /* Initialize emulation hooks */
 
-    hr = platform_hook_init(
-            &kemono_hook_cfg.platform,
-            "SDFL",
-            "AAW1",
-            kemono_hook_mod);
+    hr = platform_hook_init(&kemono_hook_cfg.platform, "SDFL", "AAW1",
+                            kemono_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
@@ -93,7 +95,9 @@ static DWORD CALLBACK kemono_pre_startup(void) {
         goto fail;
     }
 
-    hr = led15093_hook_init(&kemono_hook_cfg.led15093, kemono_dll.led_init, kemono_dll.led_set_leds, 10, 1, 1, 2);
+    unsigned int led_port_no[2] = {10, 0};
+    hr = led15093_hook_init(&kemono_hook_cfg.led15093, kemono_dll.led_init,
+                            kemono_dll.led_set_leds, led_port_no);
 
     if (FAILED(hr)) {
         goto fail;
@@ -106,7 +110,8 @@ static DWORD CALLBACK kemono_pre_startup(void) {
        There seems to be an issue with other DLL hooks if `LoadLibraryW` is
        hooked earlier in the `kemonohook` initialization. */
 
-    unity_hook_init(&kemono_hook_cfg.unity, kemono_hook_mod, kemono_extra_hooks_load);
+    unity_hook_init(&kemono_hook_cfg.unity, kemono_hook_mod,
+                    kemono_extra_hooks_load);
 
     /* Initialize debug helpers */
 
@@ -118,7 +123,7 @@ static DWORD CALLBACK kemono_pre_startup(void) {
 
     return kemono_startup();
 
-    fail:
+fail:
     ExitProcess(EXIT_FAILURE);
 }
 
@@ -134,7 +139,7 @@ BOOL WINAPI DllMain(HMODULE mod, DWORD cause, void *ctx) {
     hr = process_hijack_startup(kemono_pre_startup, &kemono_startup);
 
     if (!SUCCEEDED(hr)) {
-        dprintf("Failed to hijack process startup: %x\n", (int) hr);
+        dprintf("Failed to hijack process startup: %x\n", (int)hr);
     }
 
     return SUCCEEDED(hr);
diff --git a/mai2hook/config.c b/mai2hook/config.c
index 27e19ec..5435ada 100644
--- a/mai2hook/config.c
+++ b/mai2hook/config.c
@@ -12,24 +12,71 @@
 #include "platform/config.h"
 
 void mai2_dll_config_load(
-        struct mai2_dll_config *cfg,
-        const wchar_t *filename)
+    struct mai2_dll_config *cfg,
+    const wchar_t *filename)
 {
     assert(cfg != NULL);
     assert(filename != NULL);
 
     GetPrivateProfileStringW(
-            L"mai2io",
-            L"path",
-            L"",
-            cfg->path,
-            _countof(cfg->path),
-            filename);
+        L"mai2io",
+        L"path",
+        L"",
+        cfg->path,
+        _countof(cfg->path),
+        filename);
+}
+
+void touch_config_load(
+    struct touch_config *cfg,
+    const wchar_t *filename)
+{
+    assert(cfg != NULL);
+    assert(filename != NULL);
+
+    cfg->enable_1p = GetPrivateProfileIntW(L"touch", L"p1Enable", 1, filename);
+    cfg->enable_2p = GetPrivateProfileIntW(L"touch", L"p2Enable", 1, filename);
+}
+
+void led15070_config_load(struct led15070_config *cfg, const wchar_t *filename)
+{
+    assert(cfg != NULL);
+    assert(filename != NULL);
+
+    wchar_t tmpstr[16];
+
+    cfg->enable = GetPrivateProfileIntW(L"led15070", L"enable", 1, filename);
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15070", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15070", L"portNo2", 0, filename);
+    cfg->fw_ver = GetPrivateProfileIntW(L"led15070", L"fwVer", 0x90, filename);
+    cfg->fw_sum = GetPrivateProfileIntW(L"led15070", L"fwSum", 0x00, filename);
+
+    GetPrivateProfileStringW(
+        L"led15070",
+        L"boardNumber",
+        L"15070-04",
+        tmpstr,
+        _countof(tmpstr),
+        filename);
+
+    size_t n = wcstombs(cfg->board_number, tmpstr, sizeof(cfg->board_number));
+    for (int i = n; i < sizeof(cfg->board_number); i++)
+    {
+        cfg->board_number[i] = ' ';
+    }
+
+    GetPrivateProfileStringW(
+        L"led15070",
+        L"eepromPath",
+        L"DEVICE",
+        cfg->eeprom_path,
+        _countof(cfg->eeprom_path),
+        filename);
 }
 
 void mai2_hook_config_load(
-        struct mai2_hook_config *cfg,
-        const wchar_t *filename)
+    struct mai2_hook_config *cfg,
+    const wchar_t *filename)
 {
     assert(cfg != NULL);
     assert(filename != NULL);
@@ -40,5 +87,7 @@ void mai2_hook_config_load(
     io4_config_load(&cfg->io4, filename);
     vfd_config_load(&cfg->vfd, filename);
     mai2_dll_config_load(&cfg->dll, filename);
+    touch_config_load(&cfg->touch, filename);
+    led15070_config_load(&cfg->led15070, filename);
     unity_config_load(&cfg->unity, filename);
 }
diff --git a/mai2hook/config.h b/mai2hook/config.h
index 7e86822..1055b81 100644
--- a/mai2hook/config.h
+++ b/mai2hook/config.h
@@ -10,6 +10,10 @@
 
 #include "platform/config.h"
 
+#include "mai2hook/touch.h"
+
+#include "board/led15070.h"
+
 #include "unityhook/config.h"
 
 struct mai2_hook_config {
@@ -19,13 +23,23 @@ struct mai2_hook_config {
     struct io4_config io4;
     struct vfd_config vfd;
     struct mai2_dll_config dll;
+    struct touch_config touch;
+    struct led15070_config led15070;
     struct unity_config unity;
 };
 
 void mai2_dll_config_load(
-        struct mai2_dll_config *cfg,
-        const wchar_t *filename);
+    struct mai2_dll_config *cfg,
+    const wchar_t *filename);
+
+void touch_config_load(
+    struct touch_config *cfg,
+    const wchar_t *filename);
+
+void led15070_config_load(
+    struct led15070_config *cfg,
+    const wchar_t *filename);
 
 void mai2_hook_config_load(
-        struct mai2_hook_config *cfg,
-        const wchar_t *filename);
+    struct mai2_hook_config *cfg,
+    const wchar_t *filename);
diff --git a/mai2hook/dllmain.c b/mai2hook/dllmain.c
index 193467f..cecc01e 100644
--- a/mai2hook/dllmain.c
+++ b/mai2hook/dllmain.c
@@ -66,17 +66,54 @@ static DWORD CALLBACK mai2_pre_startup(void)
 
     /* Initialize emulation hooks */
 
+    struct dipsw_config new_dipsw_config[8] = {
+        {L"Delivery Server", L"Server", L"Client"},
+    };
+
+    // Set the system dip switch configuration
+    memcpy(mai2_hook_cfg.platform.system.dipsw_config, new_dipsw_config,
+           sizeof(new_dipsw_config));
+
     hr = platform_hook_init(
-            &mai2_hook_cfg.platform,
-            "SDEZ",
-            "ACA1",
-            mai2_hook_mod);
+        &mai2_hook_cfg.platform,
+        "SDEZ",
+        "ACA1",
+        mai2_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
     }
 
-    hr = sg_reader_hook_init(&mai2_hook_cfg.aime, 1, 1, mai2_hook_mod);
+    /* Initialize DLLs */
+
+    hr = mai2_dll_init(&mai2_hook_cfg.dll, mai2_hook_mod);
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
+    // Touch Panel uses COM3 and COM4
+
+    hr = touch_hook_init(&mai2_hook_cfg.touch);
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
+    // LED board uses COM21 and COM23
+    unsigned int led_port_no[2] = {21, 23};
+    hr = led15070_hook_init(&mai2_hook_cfg.led15070,
+        mai2_dll.led_init,
+        mai2_dll.led_set_fet_output,
+        mai2_dll.led_dc_update,
+        mai2_dll.led_gs_update,
+        led_port_no);
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
+    hr = sg_reader_hook_init(&mai2_hook_cfg.aime, 1, 3, mai2_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
@@ -88,12 +125,6 @@ static DWORD CALLBACK mai2_pre_startup(void)
         goto fail;
     }
 
-    hr = mai2_dll_init(&mai2_hook_cfg.dll, mai2_hook_mod);
-
-    if (FAILED(hr)) {
-        goto fail;
-    }
-
     hr = mai2_io4_hook_init(&mai2_hook_cfg.io4);
 
     if (FAILED(hr)) {
diff --git a/mai2hook/mai2-dll.c b/mai2hook/mai2-dll.c
index dd172c3..121750e 100644
--- a/mai2hook/mai2-dll.c
+++ b/mai2hook/mai2-dll.c
@@ -21,7 +21,28 @@ const struct dll_bind_sym mai2_dll_syms[] = {
     }, {
         .sym = "mai2_io_get_gamebtns",
         .off = offsetof(struct mai2_dll, get_gamebtns),
-    }
+    }, {
+        .sym = "mai2_io_touch_init",
+        .off = offsetof(struct mai2_dll, touch_init),
+    }, {
+        .sym = "mai2_io_touch_set_sens",
+        .off = offsetof(struct mai2_dll, touch_set_sens),
+    }, {
+        .sym = "mai2_io_touch_update",
+        .off = offsetof(struct mai2_dll, touch_update),
+    }, {
+        .sym = "mai2_io_led_init",
+        .off = offsetof(struct mai2_dll, led_init),
+    }, {
+        .sym = "mai2_io_led_set_fet_output",
+        .off = offsetof(struct mai2_dll, led_set_fet_output),
+    }, {
+        .sym = "mai2_io_led_dc_update",
+        .off = offsetof(struct mai2_dll, led_dc_update),
+    }, {
+        .sym = "mai2_io_led_gs_update",
+        .off = offsetof(struct mai2_dll, led_gs_update),
+    },
 };
 
 struct mai2_dll mai2_dll;
@@ -67,7 +88,7 @@ HRESULT mai2_dll_init(const struct mai2_dll_config *cfg, HINSTANCE self)
     if (get_api_version != NULL) {
         mai2_dll.api_version = get_api_version();
     } else {
-        mai2_dll.api_version = 0x0100;
+        mai2_dll.api_version = 0x0101;
         dprintf("Custom IO DLL does not expose mai2_io_get_api_version, "
                 "assuming API version 1.0.\n"
                 "Please ask the developer to update their DLL.\n");
diff --git a/mai2hook/mai2-dll.h b/mai2hook/mai2-dll.h
index 6e53454..599d44a 100644
--- a/mai2hook/mai2-dll.h
+++ b/mai2hook/mai2-dll.h
@@ -10,6 +10,13 @@ struct mai2_dll {
     HRESULT (*poll)(void);
     void (*get_opbtns)(uint8_t *opbtn);
     void (*get_gamebtns)(uint16_t *player1, uint16_t *player2);
+    HRESULT (*touch_init)(mai2_io_touch_callback_t callback);
+    void (*touch_set_sens)(uint8_t *bytes);
+    void (*touch_update)(bool player1, bool player2);
+    HRESULT (*led_init)(void);
+    void (*led_set_fet_output)(uint8_t board, const uint8_t *rgb);
+    void (*led_dc_update)(uint8_t board, const uint8_t *rgb);
+    void (*led_gs_update)(uint8_t board, const uint8_t *rgb);
 };
 
 struct mai2_dll_config {
diff --git a/mai2hook/mai2hook.def b/mai2hook/mai2hook.def
index 2d0ac8b..50e4058 100644
--- a/mai2hook/mai2hook.def
+++ b/mai2hook/mai2hook.def
@@ -15,4 +15,11 @@ EXPORTS
     mai2_io_get_gamebtns
     mai2_io_get_opbtns
     mai2_io_init
-    mai2_io_poll
\ No newline at end of file
+    mai2_io_poll
+    mai2_io_touch_init
+    mai2_io_touch_set_sens
+    mai2_io_touch_update
+    mai2_io_led_init
+    mai2_io_led_set_fet_output
+    mai2_io_led_dc_update
+    mai2_io_led_gs_update
diff --git a/mai2hook/meson.build b/mai2hook/meson.build
index eba0c19..ed47793 100644
--- a/mai2hook/meson.build
+++ b/mai2hook/meson.build
@@ -23,6 +23,8 @@ shared_library(
         'dllmain.c',
         'io4.c',
         'io4.h',
+        'touch.c',
+        'touch.h',
         'mai2-dll.c',
         'mai2-dll.h',
     ],
diff --git a/mai2hook/touch.c b/mai2hook/touch.c
new file mode 100644
index 0000000..305d005
--- /dev/null
+++ b/mai2hook/touch.c
@@ -0,0 +1,259 @@
+#include <assert.h>
+#include <stdlib.h>
+
+#include "hooklib/fdshark.h"
+#include "hooklib/reg.h"
+
+#include "mai2hook/mai2-dll.h"
+#include "mai2hook/touch.h"
+
+#include "util/dprintf.h"
+#include "util/dump.h"
+
+
+static HRESULT read_reg_touch_1p(void *bytes, uint32_t *nbytes)
+{
+    return reg_hook_read_wstr(bytes, nbytes, L"COM3");
+}
+
+static HRESULT read_reg_touch_2p(void *bytes, uint32_t *nbytes)
+{
+    return reg_hook_read_wstr(bytes, nbytes, L"COM4");
+}
+
+static const struct reg_hook_val touch_reg_key[] = {
+    {
+        .name = L"\\Device\\RealTouchBoard0",
+        .read = read_reg_touch_1p,
+        .type = REG_SZ,
+    },
+    {
+        .name = L"\\Device\\RealTouchBoard1",
+        .read = read_reg_touch_2p,
+        .type = REG_SZ,
+    },
+};
+
+const char *sensor_map[34] = {
+    "A1", "A2", "A3", "A4", "A5", "A6", "A7", "A8", // 0x41 - 0x48
+    "B1", "B2", "B3", "B4", "B5", "B6", "B7", "B8", // 0x49 - 0x50
+    "C1", "C2",                                     // 0x51 - 0x52
+    "D1", "D2", "D3", "D4", "D5", "D6", "D7", "D8", // 0x53 - 0x5A
+    "E1", "E2", "E3", "E4", "E5", "E6", "E7", "E8"  // 0x5B - 0x62
+};
+
+const char *sensor_to_str(uint8_t sensor)
+{
+    if (sensor < 0x41 || sensor > 0x62)
+    {
+        return "Invalid";
+    }
+
+    return sensor_map[sensor - 0x41];
+}
+
+static CRITICAL_SECTION touch_1p_lock;
+static struct uart touch_1p_uart;
+static uint8_t touch_1p_written_bytes[64];
+static uint8_t touch_1p_readable_bytes[64];
+static bool touch_1p_status = false;
+
+static CRITICAL_SECTION touch_2p_lock;
+static struct uart touch_2p_uart;
+static uint8_t touch_2p_written_bytes[64];
+static uint8_t touch_2p_readable_bytes[64];
+static bool touch_2p_status = false;
+
+HRESULT touch_hook_init(const struct touch_config *cfg)
+{
+    assert(cfg != NULL);
+
+    if (!cfg->enable_1p && !cfg->enable_2p)
+    {
+        return S_FALSE;
+    }
+
+    HRESULT hr = reg_hook_push_key(HKEY_LOCAL_MACHINE, L"HARDWARE\\DEVICEMAP\\SERIALCOMM", touch_reg_key, _countof(touch_reg_key));
+
+    if (FAILED(hr))
+    {
+        return hr;
+    }
+
+    if (cfg->enable_1p)
+    {
+        dprintf("Mai2 touch 1P: Init.\n");
+
+        InitializeCriticalSection(&touch_1p_lock);
+        uart_init(&touch_1p_uart, 3);
+        touch_1p_uart.written.bytes = touch_1p_written_bytes;
+        touch_1p_uart.written.nbytes = sizeof(touch_1p_written_bytes);
+        touch_1p_uart.readable.bytes = touch_1p_readable_bytes;
+        touch_1p_uart.readable.nbytes = sizeof(touch_1p_readable_bytes);
+    }
+
+    if (cfg->enable_2p)
+    {
+        dprintf("Mai2 touch 2P: Init.\n");
+
+        InitializeCriticalSection(&touch_2p_lock);
+        uart_init(&touch_2p_uart, 4);
+        touch_2p_uart.written.bytes = touch_2p_written_bytes;
+        touch_2p_uart.written.nbytes = sizeof(touch_2p_written_bytes);
+        touch_2p_uart.readable.bytes = touch_2p_readable_bytes;
+        touch_2p_uart.readable.nbytes = sizeof(touch_2p_readable_bytes);
+    }
+
+    return iohook_push_handler(touch_handle_irp);
+}
+
+static HRESULT touch_handle_irp(struct irp *irp)
+{
+    HRESULT hr;
+
+    assert(irp != NULL);
+
+    if (uart_match_irp(&touch_1p_uart, irp))
+    {
+        EnterCriticalSection(&touch_1p_lock);
+        hr = touch_handle_irp_locked(irp, &touch_1p_uart);
+        LeaveCriticalSection(&touch_1p_lock);
+    }
+    else if (uart_match_irp(&touch_2p_uart, irp))
+    {
+        EnterCriticalSection(&touch_2p_lock);
+        hr = touch_handle_irp_locked(irp, &touch_2p_uart);
+        LeaveCriticalSection(&touch_2p_lock);
+    }
+    else
+    {
+        return iohook_invoke_next(irp);
+    }
+
+    return hr;
+}
+
+static HRESULT touch_handle_irp_locked(struct irp *irp, struct uart *uart)
+{
+    HRESULT hr;
+
+    if (irp->op == IRP_OP_OPEN)
+    {
+        dprintf("Mai2 touch port %d: Starting backend\n", uart->port_no);
+        hr = mai2_dll.touch_init(touch_auto_scan);
+
+        if (FAILED(hr))
+        {
+            dprintf("Mai2 touch port %d: Backend error: %x\n", uart->port_no, (int)hr);
+            return hr;
+        }
+    }
+
+    hr = uart_handle_irp(uart, irp);
+
+    if (FAILED(hr) || irp->op != IRP_OP_WRITE)
+    {
+        return hr;
+    }
+
+#if defined(LOG_MAI2_TOUCH)
+    dprintf("Mai2 touch port %d WRITE:\n", uart->port_no);
+    dump_iobuf(&uart->written);
+#endif
+    uint8_t port_no = uart->port_no;
+    uint8_t *src = uart->written.bytes;
+    uint8_t *dest = uart->readable.bytes;
+
+    switch (src[3])
+    {
+    case commandRSET:
+        dprintf("Mai2 touch port %d: Reset\n", port_no);
+        break;
+
+    case commandHALT: // Enter Conditioning mode and stop sending touch data.
+        dprintf("Mai2 touch port %d: Halt\n", port_no);
+        assert(mai2_dll.touch_update != NULL);
+        if (port_no == 3)
+        {
+            EnterCriticalSection(&touch_1p_lock);
+            touch_1p_status = false;
+            mai2_dll.touch_update(touch_1p_status, touch_2p_status);
+            LeaveCriticalSection(&touch_1p_lock);
+        }
+        else
+        {
+            EnterCriticalSection(&touch_2p_lock);
+            touch_2p_status = false;
+            mai2_dll.touch_update(touch_1p_status, touch_2p_status);
+            LeaveCriticalSection(&touch_2p_lock);
+        }
+        break;
+
+    case commandSTAT: // Exit Conditioning mode and resume sending touch data.
+        dprintf("Mai2 touch port %d: Stat\n", port_no);
+        assert(mai2_dll.touch_update != NULL);
+        if (port_no == 3)
+        {
+            EnterCriticalSection(&touch_1p_lock);
+            touch_1p_status = true;
+            mai2_dll.touch_update(touch_1p_status, touch_2p_status);
+            LeaveCriticalSection(&touch_1p_lock);
+        }
+        else
+        {
+            EnterCriticalSection(&touch_2p_lock);
+            touch_2p_status = true;
+            mai2_dll.touch_update(touch_1p_status, touch_2p_status);
+            LeaveCriticalSection(&touch_2p_lock);
+        }
+        break;
+
+    case commandRatio:
+#if defined(LOG_MAI2_TOUCH)
+        dprintf("Mai2 touch side %c: set sensor %s ratio to %d\n", src[1], sensor_to_str(src[2]), src[4]);
+#endif
+        dest[0] = res_start;
+        dest[1] = src[1]; // L,R
+        dest[2] = src[2]; // sensor
+        dest[3] = commandRatio;
+        dest[4] = src[4]; // Ratio
+        dest[5] = res_end;
+        uart->readable.pos = 6;
+        // The Ratio is fixed at 0x72 and does not need to be sent to mai2io for processing.
+        break;
+
+    case commandSens:
+#if defined(LOG_MAI2_TOUCH)
+        dprintf("Mai2 touch side %c: set sensor %s sensitivity to %d\n", src[1], sensor_to_str(src[2]), src[4]);
+#endif
+        dest[0] = res_start;
+        dest[1] = src[1]; // L,R
+        dest[2] = src[2]; // sensor
+        dest[3] = commandSens;
+        dest[4] = src[4]; // Sensitivity
+        dest[5] = res_end;
+        uart->readable.pos = 6;
+        mai2_dll.touch_set_sens(dest);
+        break;
+
+    default:
+        dprintf("Mai2 touch port %d: Unknow %02x\n", port_no, src[3]);
+        break;
+    }
+#if defined(LOG_MAI2_TOUCH)
+    dprintf("Mai2 touch port %d READ:\n", uart->port_no);
+    dump_iobuf(&uart->readable);
+#endif
+    uart->written.pos = 0;
+
+    return hr;
+}
+
+static void touch_auto_scan(const uint8_t player, const uint8_t state[7])
+{
+    struct uart *touch_uart = player == 1 ? &touch_1p_uart : &touch_2p_uart;
+    touch_uart->readable.bytes[0] = res_start;
+    memcpy(&touch_uart->readable.bytes[1], state, 7);
+    touch_uart->readable.bytes[8] = res_end;
+    touch_uart->readable.pos = 9;
+}
diff --git a/mai2hook/touch.h b/mai2hook/touch.h
new file mode 100644
index 0000000..f6fc72a
--- /dev/null
+++ b/mai2hook/touch.h
@@ -0,0 +1,38 @@
+#pragma once
+
+#include <windows.h>
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "hooklib/uart.h"
+
+struct touch_config
+{
+    bool enable_1p;
+    bool enable_2p;
+};
+
+enum
+{
+    commandRSET = 0x45,  // E
+    commandHALT = 0x4C,  // L
+    commandSTAT = 0x41,  // A
+    commandRatio = 0x72, // r
+    commandSens = 0x6B,  // k
+    req_start = 0x7b,    // {
+    req_end = 0x7d,      // }
+    res_start = 0x28,    // (
+    res_end = 0x29,      // )
+};
+
+extern const char *sensor_map[34];
+const char *sensor_to_str(uint8_t sensor);
+
+HRESULT touch_hook_init(const struct touch_config *cfg);
+static HRESULT touch_handle_irp(struct irp *irp);
+static HRESULT touch_handle_irp_locked(struct irp *irp, struct uart *uart);
+
+/* Called in mai2io to send touch data.
+   Similar to chuni slider_res_auto_scan, but the host does not require periodic updates.
+   Touch data is sent only when there is a change. */
+static void touch_auto_scan(const uint8_t player, const uint8_t state[7]);
diff --git a/mai2io/config.c b/mai2io/config.c
index 3578338..c6c9913 100644
--- a/mai2io/config.c
+++ b/mai2io/config.c
@@ -6,6 +6,7 @@
 #include <stdlib.h>
 
 #include "mai2io/config.h"
+#include "mai2hook/touch.h"
 
 /*
 Maimai DX Default key binding
@@ -15,9 +16,24 @@ Maimai DX Default key binding
 static const int mai2_io_1p_default[] = {'W', 'E', 'D', 'C', 'X', 'Z', 'A', 'Q', '3'};
 static const int mai2_io_2p_default[] = {0x68, 0x69, 0x66, 0x63, 0x62, 0x61, 0x64, 0x67, 0x54};
 
+static const int mai2_io_1p_touch_default[] = {
+    'T', 'Y', 'H', 'N', 'B', 'V', 'F', 'R',
+    'T', 'Y', 'H', 'N', 'B', 'V', 'F', 'R',
+    'G', 'G',
+    'T', 'Y', 'H', 'N', 'B', 'V', 'F', 'R',
+    'T', 'Y', 'H', 'N', 'B', 'V', 'F', 'R',
+};
+static const int mai2_io_2p_touch_default[] = {
+    'I', 'O', 'L', VK_OEM_PERIOD, VK_OEM_COMMA, 'M', 'J', 'U',
+    'I', 'O', 'L', VK_OEM_PERIOD, VK_OEM_COMMA, 'M', 'J', 'U',
+    'K', 'K',
+    'I', 'O', 'L', VK_OEM_PERIOD, VK_OEM_COMMA, 'M', 'J', 'U',
+    'I', 'O', 'L', VK_OEM_PERIOD, VK_OEM_COMMA, 'M', 'J', 'U',
+};
+
 void mai2_io_config_load(
-        struct mai2_io_config *cfg,
-        const wchar_t *filename)
+    struct mai2_io_config *cfg,
+    const wchar_t *filename)
 {
     wchar_t key[16];
     int i;
@@ -28,22 +44,41 @@ void mai2_io_config_load(
     cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", VK_F1, filename);
     cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", VK_F2, filename);
     cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", VK_F3, filename);
+    cfg->vk_btn_enable = GetPrivateProfileIntW(L"button", L"enable", 1, filename);
 
-    for (i = 0 ; i < 9 ; i++) {
-        swprintf_s(key, _countof(key), L"1p_btn%i", i + 1);
+    for (i = 0; i < 9; i++)
+    {
+        swprintf_s(key, _countof(key), L"p1Btn%i", i + 1);
         cfg->vk_1p_btn[i] = GetPrivateProfileIntW(
-                L"button",
-                key,
-                mai2_io_1p_default[i],
-                filename);
+            L"button",
+            key,
+            mai2_io_1p_default[i],
+            filename);
+
+        swprintf_s(key, _countof(key), L"p2Btn%i", i + 1);
+        cfg->vk_2p_btn[i] = GetPrivateProfileIntW(
+            L"button",
+            key,
+            mai2_io_2p_default[i],
+            filename);
     }
 
-    for (i = 0 ; i < 9 ; i++) {
-        swprintf_s(key, _countof(key), L"2p_btn%i", i + 1);
-        cfg->vk_2p_btn[i] = GetPrivateProfileIntW(
-                L"button",
-                key,
-                mai2_io_2p_default[i],
-                filename);
+    cfg->debug_input_1p = GetPrivateProfileIntW(L"touch", L"p1DebugInput", 0, filename);
+    cfg->debug_input_2p = GetPrivateProfileIntW(L"touch", L"p2DebugInput", 0, filename);
+    for (i = 0; i < 34; i++)
+    {
+        swprintf_s(key, _countof(key), L"p1Touch%S", sensor_map[i]);
+        cfg->vk_1p_touch[i] = GetPrivateProfileIntW(
+            L"touch",
+            key,
+            mai2_io_1p_touch_default[i],
+            filename);
+
+        swprintf_s(key, _countof(key), L"p2Touch%S", sensor_map[i]);
+        cfg->vk_2p_touch[i] = GetPrivateProfileIntW(
+            L"touch",
+            key,
+            mai2_io_2p_touch_default[i],
+            filename);
     }
 }
diff --git a/mai2io/config.h b/mai2io/config.h
index 568b832..ce765ed 100644
--- a/mai2io/config.h
+++ b/mai2io/config.h
@@ -9,8 +9,13 @@ struct mai2_io_config {
     uint8_t vk_test;
     uint8_t vk_service;
     uint8_t vk_coin;
+    bool vk_btn_enable;
     uint8_t vk_1p_btn[9];
     uint8_t vk_2p_btn[9];
+    bool debug_input_1p;
+    bool debug_input_2p;
+    uint8_t vk_1p_touch[34];
+    uint8_t vk_2p_touch[34];
 };
 
 void mai2_io_config_load(
diff --git a/mai2io/mai2io.c b/mai2io/mai2io.c
index ffdbfcf..57404cb 100644
--- a/mai2io/mai2io.c
+++ b/mai2io/mai2io.c
@@ -1,10 +1,11 @@
-#include <windows.h>
+#include "mai2io/mai2io.h"
 
 #include <limits.h>
-#include <stdint.h>
+#include <process.h>
 
-#include "mai2io/mai2io.h"
+#include "mai2hook/touch.h"
 #include "mai2io/config.h"
+#include "util/dprintf.h"
 #include "util/env.h"
 
 static uint8_t mai2_opbtn;
@@ -12,21 +13,21 @@ static uint16_t mai2_player1_btn;
 static uint16_t mai2_player2_btn;
 static struct mai2_io_config mai2_io_cfg;
 static bool mai2_io_coin;
+mai2_io_touch_callback_t _callback;
+static HANDLE mai2_io_touch_1p_thread;
+static bool mai2_io_touch_1p_stop_flag;
+static HANDLE mai2_io_touch_2p_thread;
+static bool mai2_io_touch_2p_stop_flag;
 
-uint16_t mai2_io_get_api_version(void)
-{
-    return 0x0100;
-}
+uint16_t mai2_io_get_api_version(void) { return 0x0101; }
 
-HRESULT mai2_io_init(void)
-{
+HRESULT mai2_io_init(void) {
     mai2_io_config_load(&mai2_io_cfg, get_config_path());
 
     return S_OK;
 }
 
-HRESULT mai2_io_poll(void)
-{
+HRESULT mai2_io_poll(void) {
     mai2_opbtn = 0;
     mai2_player1_btn = 0;
     mai2_player2_btn = 0;
@@ -47,8 +48,13 @@ HRESULT mai2_io_poll(void)
     } else {
         mai2_io_coin = false;
     }
+    // If sinmai has enabled DebugInput, there is no need to input buttons
+    // through hook amdaemon.
+    if (!mai2_io_cfg.vk_btn_enable) {
+        return S_OK;
+    }
 
-    //Player 1
+    // Player 1
     if (GetAsyncKeyState(mai2_io_cfg.vk_1p_btn[0])) {
         mai2_player1_btn |= MAI2_IO_GAMEBTN_1;
     }
@@ -85,7 +91,7 @@ HRESULT mai2_io_poll(void)
         mai2_player1_btn |= MAI2_IO_GAMEBTN_SELECT;
     }
 
-    //Player 2
+    // Player 2
     if (GetAsyncKeyState(mai2_io_cfg.vk_2p_btn[0])) {
         mai2_player2_btn |= MAI2_IO_GAMEBTN_1;
     }
@@ -125,20 +131,137 @@ HRESULT mai2_io_poll(void)
     return S_OK;
 }
 
-void mai2_io_get_opbtns(uint8_t *opbtn)
-{
+void mai2_io_get_opbtns(uint8_t *opbtn) {
     if (opbtn != NULL) {
         *opbtn = mai2_opbtn;
     }
 }
 
-void mai2_io_get_gamebtns(uint16_t *player1, uint16_t *player2)
-{
+void mai2_io_get_gamebtns(uint16_t *player1, uint16_t *player2) {
     if (player1 != NULL) {
         *player1 = mai2_player1_btn;
     }
 
-    if (player2 != NULL ){
+    if (player2 != NULL) {
         *player2 = mai2_player2_btn;
     }
 }
+
+HRESULT mai2_io_touch_init(mai2_io_touch_callback_t callback) {
+    _callback = callback;
+    return S_OK;
+}
+
+void mai2_io_touch_set_sens(uint8_t *bytes) {
+#if 0
+    dprintf("Mai2 touch side %c: set sensor %s sensitivity to %d\n", bytes[1], sensor_to_str(bytes[2]), bytes[4]);
+#endif
+    return;
+}
+
+void mai2_io_touch_update(bool player1, bool player2) {
+    if (mai2_io_cfg.debug_input_1p) {
+        if (player1 && mai2_io_touch_1p_thread == NULL) {
+            mai2_io_touch_1p_thread = (HANDLE)_beginthreadex(
+                NULL, 0, mai2_io_touch_1p_thread_proc, _callback, 0, NULL);
+        } else if (!player1 && mai2_io_touch_1p_thread != NULL) {
+            mai2_io_touch_1p_stop_flag = true;
+
+            WaitForSingleObject(mai2_io_touch_1p_thread, INFINITE);
+            CloseHandle(mai2_io_touch_1p_thread);
+            mai2_io_touch_1p_thread = NULL;
+
+            mai2_io_touch_1p_stop_flag = false;
+        }
+    }
+
+    if (mai2_io_cfg.debug_input_2p) {
+        if (player2 && mai2_io_touch_2p_thread == NULL) {
+            mai2_io_touch_2p_thread = (HANDLE)_beginthreadex(
+                NULL, 0, mai2_io_touch_2p_thread_proc, _callback, 0, NULL);
+        } else if (!player2 && mai2_io_touch_2p_thread != NULL) {
+            mai2_io_touch_2p_stop_flag = true;
+
+            WaitForSingleObject(mai2_io_touch_2p_thread, INFINITE);
+            CloseHandle(mai2_io_touch_2p_thread);
+            mai2_io_touch_2p_thread = NULL;
+
+            mai2_io_touch_2p_stop_flag = false;
+        }
+    }
+}
+
+static unsigned int __stdcall mai2_io_touch_1p_thread_proc(void *ctx) {
+    mai2_io_touch_callback_t callback = ctx;
+
+    while (!mai2_io_touch_1p_stop_flag) {
+        uint8_t state[7] = {0, 0, 0, 0, 0, 0, 0};
+
+        for (int i = 0; i < 34; i++) {
+            if (GetAsyncKeyState(mai2_io_cfg.vk_1p_touch[i])) {
+                int byteIndex = i / 5;
+                int bitIndex = i % 5;
+                state[byteIndex] |= (1 << bitIndex);
+            }
+        }
+        callback(1, state);
+        Sleep(1);
+    }
+    return 0;
+}
+
+static unsigned int __stdcall mai2_io_touch_2p_thread_proc(void *ctx) {
+    mai2_io_touch_callback_t callback = ctx;
+
+    while (!mai2_io_touch_2p_stop_flag) {
+        uint8_t state[7] = {0, 0, 0, 0, 0, 0, 0};
+
+        for (int i = 0; i < 34; i++) {
+            if (GetAsyncKeyState(mai2_io_cfg.vk_2p_touch[i])) {
+                int byteIndex = i / 5;
+                int bitIndex = i % 5;
+                state[byteIndex] |= (1 << bitIndex);
+            }
+        }
+        callback(2, state);
+        Sleep(1);
+    }
+    return 0;
+}
+
+HRESULT mai2_io_led_init(void) { return S_OK; }
+
+void mai2_io_led_set_fet_output(uint8_t board, const uint8_t *rgb) {
+#if 0
+    uint8_t player = board + 1;
+    dprintf("MAI2 LED %dP: BodyLed brightness: %d%%\n", player,
+            (rgb[0] * 100) / 255);
+    dprintf("MAI2 LED %dP: ExtLed brightness: %d%%\n", player,
+            (rgb[1] * 100) / 255);
+    dprintf("MAI2 LED %dP: SideLed brightness: %d%%\n", player,
+            (rgb[2] * 100) / 255);
+#endif
+    return;
+}
+
+void mai2_io_led_dc_update(uint8_t board, const uint8_t *rgb) {
+#if 0
+    uint8_t player = board + 1;
+    for (int i = 0; i < 10; i++) {
+        dprintf("Mai2 LED %dP: LED %d: %02X %02X %02X Speed: %02X\n", player
+                i, rgb[i * 4], rgb[i * 4 + 1], rgb[i * 4 + 2], rgb[i * 4 + 3]);
+    }
+#endif
+    return;
+}
+
+void mai2_io_led_gs_update(uint8_t board, const uint8_t *rgb) {
+#if 0
+    uint8_t player = board + 1;
+    for (int i = 0; i < 8; i++) {
+        dprintf("Mai2 LED %dP: LED %d: %02X %02X %02X Speed: %02X\n", player, i,
+                rgb[i * 4], rgb[i * 4 + 1], rgb[i * 4 + 2], rgb[i * 4 + 3]);
+    }
+#endif
+    return;
+}
diff --git a/mai2io/mai2io.h b/mai2io/mai2io.h
index 084228c..9c0a7f0 100644
--- a/mai2io/mai2io.h
+++ b/mai2io/mai2io.h
@@ -3,6 +3,7 @@
 #include <windows.h>
 
 #include <stdint.h>
+#include <stdbool.h>
 
 enum {
     MAI2_IO_OPBTN_TEST = 0x01,
@@ -66,3 +67,126 @@ void mai2_io_get_opbtns(uint8_t *opbtn);
    Minimum API version: 0x0100 */
 
 void mai2_io_get_gamebtns(uint16_t *player1, uint16_t *player2);
+
+/* Callback function used by mai2_io_touch_1p/2p_thread_proc. 
+
+   The 'player'(1 or 2) parameter indicates which player the touch data is for.
+
+   The 'state' represents a complete response packet.
+   The format of the state array is as follows:
+   uint8_t state[7] = {
+      bytes[0] - bit(0 , 0 , 0 , A5, A4, A3, A2, A1)
+      bytes[1] - bit(0 , 0 , 0 , B2, B1, A8, A7, A6)
+      bytes[2] - bit(0 , 0 , 0 , B7, B6, B5, B4, B3)
+      bytes[3] - bit(0 , 0 , 0 , D2, D1, C2, C1, B8)
+      bytes[4] - bit(0 , 0 , 0 , D7, D6, D5, D4, D3)
+      bytes[5] - bit(0 , 0 , 0 , E4, E3, E2, E1, D8)
+      bytes[6] - bit(0 , 0 , 0 , 0 , E8, E7, E6, E5)
+   }
+   The 7 bytes are the touch data, with each byte storing the touch state in the lower 5 bits.
+   A value of 1 indicates that the corresponding touch area is pressed.
+   The touch areas are ordered from A1 to E8, and the binary values are stored from low to high. */
+
+typedef void (*mai2_io_touch_callback_t)(const uint8_t player, const uint8_t state[7]);
+
+/**
+ * @brief Initializes the touch input callback function
+ *
+ * This function accepts a callback function as a parameter and stores it in the global variable `_callback`
+ * for later handling of touch input events.
+ *
+ * @param callback The touch input callback function that takes two parameters: player number and the touch state array.
+ * @return HRESULT Returns the result of the operation, S_OK on success.
+ */
+
+HRESULT mai2_io_touch_init(mai2_io_touch_callback_t callback);
+
+/* Send sensitivity setting data to the touch device.
+   Format:
+   bytes[0] - Header
+   bytes[1] - Target device, ASCII characters 'L' or 'R'
+   bytes[2] - Target touch point
+   bytes[3] - commandRatio identifier
+   bytes[4] - Ratio value to be set, within a fixed range
+   bytes[5] - Footer
+
+   Example function, not actually used. The sensitivity range can be determined
+   based on the Ratio set within the game. */
+
+void mai2_io_touch_set_sens(uint8_t *bytes);
+
+/**
+ * @brief Updates the touch input acceptance state
+ *
+ * This function determines whether the game is ready to accept touch input based on the states of player 1 and player 2.
+ * If the game is ready, it creates or stops the corresponding threads to handle touch data for each player.
+ * Whether or not threads are created for each player is controlled by `mai2_io_cfg.debug_input_1p` and `mai2_io_cfg.debug_input_2p` configuration.
+ *
+ * @param player1 If `true`, indicates the game is ready to accept touch data from player 1, `false` means the game is not ready.
+ * @param player2 If `true`, indicates the game is ready to accept touch data from player 2, `false` means the game is not ready.
+ */
+
+void mai2_io_touch_update(bool player1, bool player2);
+
+/**
+ * @brief Player touch input handling thread
+ *
+ * This function runs in a separate thread, continuously monitoring player touch status and passing the state data
+ * to the main thread via a callback function. Each time a touch input is detected, it updates the `state` array and calls the callback.
+ * The thread stops when `mai2_io_touch_1p/2p_stop_flag` is `true`.
+ *
+ * @param ctx The callback function context, of type `mai2_io_touch_callback_t`, used to handle the touch input events.
+ * @return The thread's return value, typically `0`.
+ */
+
+static unsigned int __stdcall mai2_io_touch_1p_thread_proc(void *ctx);
+
+static unsigned int __stdcall mai2_io_touch_2p_thread_proc(void *ctx);
+
+/* Initialize LED emulation. This function will be called before any
+   other mai2_io_led_*() function calls.
+
+   All subsequent calls may originate from arbitrary threads and some may
+   overlap with each other. Ensuring synchronization inside your IO DLL is
+   your responsibility. 
+   
+   Minimum API version: 0x0101 */
+
+HRESULT mai2_io_led_init(void);
+
+/* Update the FET outputs. rgb is a pointer to an array up to 3 bytes.
+
+   maimai DX uses two boards. Board 0 is for the player 1 side (left) and board 1 
+   is for the player 2 side (right).
+
+   Set the brightness of the white light on the machine's outer shell.  
+   The program will continuously send changed values to request the blinking effect.
+
+   [0]: BodyLed
+   [1]: ExtLed
+   [2]: SideLed
+
+   The LED is truned on when the byte is 255 and turned off when the byte is 0.
+
+   Minimum API version: 0x0101 */
+
+void mai2_io_led_set_fet_output(uint8_t board, const uint8_t *rgb);
+
+/* The effect of this command is unknown, it is triggered after LED_15070_CMD_EEPROM_READ. */
+
+void mai2_io_led_dc_update(uint8_t board, const uint8_t *rgb);
+
+/* Update the RGB LEDs. rgb is a pointer to an array up to 8 * 4 = 32 bytes.
+
+   maimai DX uses two boards. Board 0 is for the player 1 side (left) and board 1
+   is for the player 2 side (right).
+
+   The LEDs are laid out as follows:
+   [0-7]: 8 button LED
+ 
+   Each rgb value is comprised for 4 bytes in the order of R, G, B, Speed.
+   Speed is a value from 0 to 255, where 0 is the fastest speed and 255 is the slowest.
+
+   Minimum API version: 0x0101 */
+
+void mai2_io_led_gs_update(uint8_t board, const uint8_t *rgb);
diff --git a/mai2io/meson.build b/mai2io/meson.build
index cdbfd35..3d06b9f 100644
--- a/mai2io/meson.build
+++ b/mai2io/meson.build
@@ -3,6 +3,9 @@ mai2io_lib = static_library(
     name_prefix : '',
     include_directories : inc,
     implicit_include_directories : false,
+    dependencies : [
+        capnhook.get_variable('hook_dep'),
+    ],
     sources : [
         'mai2io.c',
         'mai2io.h',
diff --git a/mercuryhook/dllmain.c b/mercuryhook/dllmain.c
index 64b5707..37030d3 100644
--- a/mercuryhook/dllmain.c
+++ b/mercuryhook/dllmain.c
@@ -64,6 +64,14 @@ static DWORD CALLBACK mercury_pre_startup(void)
 
     /* Initialize emulation hooks */
 
+    struct dipsw_config new_dipsw_config[8] = {
+        {L"Delivery Server", L"Server", L"Client"},
+    };
+
+    // Set the system dip switch configuration
+    memcpy(mercury_hook_cfg.platform.system.dipsw_config, new_dipsw_config,
+           sizeof(new_dipsw_config));
+
     hr = platform_hook_init(
             &mercury_hook_cfg.platform,
             "SDFE",
diff --git a/meson.build b/meson.build
index 40a99c4..aada974 100644
--- a/meson.build
+++ b/meson.build
@@ -46,6 +46,9 @@ endif
 if get_option('log_all') or get_option('log_io3')
     add_project_arguments('-DLOG_IO3', language: 'c')
 endif
+if get_option('log_all') or get_option('log_led15070')
+    add_project_arguments('-DLOG_LED15070', language: 'c')
+endif
 if get_option('log_all') or get_option('log_led15093')
     add_project_arguments('-DLOG_LED15093', language: 'c')
 endif
@@ -61,6 +64,9 @@ endif
 if get_option('log_all') or get_option('log_carol_touch')
     add_project_arguments('-DLOG_CAROL_TOUCH', language: 'c')
 endif
+if get_option('log_all') or get_option('log_mai2_touch')
+    add_project_arguments('-DLOG_MAI2_TOUCH', language: 'c')
+endif
 if get_option('log_all') or get_option('log_chuni_slider')
     add_project_arguments('-DLOG_CHUNI_SLIDER', language: 'c')
 endif
@@ -83,7 +89,7 @@ dxguid_lib = cc.find_library('dxguid')
 xinput_lib = cc.find_library('xinput')
 pathcch_lib = cc.find_library('pathcch')
 imagehlp_lib = cc.find_library('imagehlp')
-Ws2_32_lib = cc.find_library('Ws2_32')
+ws2_32_lib = cc.find_library('ws2_32')
 
 inc = include_directories('.')
 capnhook = subproject('capnhook')
diff --git a/meson_options.txt b/meson_options.txt
index fb39b10..de9aefc 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -13,6 +13,11 @@ option('log_io3',
     value : false,
     description : 'Enable debug logging for JVS'
 )
+option('log_led15070',
+    type : 'boolean',
+    value : false,
+    description : 'Enable debug logging for the 15070 LED board emulation'
+)
 option('log_led15093',
     type : 'boolean',
     value : false,
@@ -38,6 +43,11 @@ option('log_carol_touch',
     value : false,
     description : 'Enable debug logging for the Carlo Touchscreen'
 )
+option('log_mai2_touch',
+    type : 'boolean',
+    value : false,
+    description : 'Enable debug logging for the mai2 TouchPanel'
+)
 option('log_chuni_slider',
     type : 'boolean',
     value : false,
diff --git a/mu3hook/config.c b/mu3hook/config.c
index 93957ea..6c52446 100644
--- a/mu3hook/config.c
+++ b/mu3hook/config.c
@@ -41,7 +41,8 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
     memset(cfg->boot_chip_number, ' ', sizeof(cfg->boot_chip_number));
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
-    cfg->port_no = GetPrivateProfileIntW(L"led15093", L"portNo", 0, filename);
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15093", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15093", L"portNo2", 0, filename);
     cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0xA0, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xAA53, filename);
diff --git a/mu3hook/dllmain.c b/mu3hook/dllmain.c
index e4336e9..1b57e5d 100644
--- a/mu3hook/dllmain.c
+++ b/mu3hook/dllmain.c
@@ -65,6 +65,14 @@ static DWORD CALLBACK mu3_pre_startup(void)
 
     /* Initialize emulation hooks */
 
+    struct dipsw_config new_dipsw_config[8] = {
+        {L"Delivery Server", L"Server", L"Client"},
+    };
+
+    // Set the system dip switch configuration
+    memcpy(mu3_hook_cfg.platform.system.dipsw_config, new_dipsw_config,
+           sizeof(new_dipsw_config));
+
     hr = platform_hook_init(
             &mu3_hook_cfg.platform,
             "SDDT",
@@ -81,8 +89,9 @@ static DWORD CALLBACK mu3_pre_startup(void)
         goto fail;
     }
 
+    unsigned int led_port_no[2] = {3, 0};
     hr = led15093_hook_init(&mu3_hook_cfg.led15093, 
-        mu3_dll.led_init, mu3_dll.led_set_leds, 3, 1, 1, 2);
+        mu3_dll.led_init, mu3_dll.led_set_leds, led_port_no);
 
     if (FAILED(hr)) {
         return hr;
diff --git a/platform/epay.c b/platform/epay.c
index 0faf145..4a231c2 100644
--- a/platform/epay.c
+++ b/platform/epay.c
@@ -189,7 +189,7 @@ HRESULT epay_hook_init(const struct epay_config *cfg) {
     thinca_stub->impl1->unk220 = thinca_unk;
     thinca_stub->impl1->unk228 = thinca_unk;
     
-    dprintf("Epay: Init\n");
+    dprintf("Epay: Init.\n");
 
     return hr;
 }
diff --git a/platform/system.c b/platform/system.c
index dbc832f..5879032 100644
--- a/platform/system.c
+++ b/platform/system.c
@@ -1,40 +1,36 @@
-#include <windows.h>
+#include "platform/system.h"
 
+#include <windows.h>
 #include <assert.h>
-#include <stdlib.h>
 #include <stdio.h>
+#include <stdlib.h>
 #include <string.h>
 
-#include "platform/system.h"
 #include "platform/vfs.h"
-
+#include "util/crc.h"
 #include "util/dprintf.h"
 #include "util/str.h"
-#include "util/crc.h"
 
 #define DATA_SIZE 503
 #define BLOCK_SIZE (sizeof(uint32_t) + 4 + 1 + DATA_SIZE)
 
 #pragma pack(push, 1)
 
-typedef struct
-{
+typedef struct {
     uint32_t checksum;
     char padding[6];
     uint8_t freeplay;
     char data[DATA_SIZE - 2];
 } CreditBlock;
 
-typedef struct
-{
+typedef struct {
     uint32_t checksum;
     char padding[4];
     uint8_t dip_switches;
     char data[DATA_SIZE];
 } DipSwBlock;
 
-typedef struct
-{
+typedef struct {
     CreditBlock credit_block;
     DipSwBlock dip_switch_block;
     char *data;
@@ -50,16 +46,15 @@ static struct vfs_config vfs_config;
 static void system_read_sysfile(const wchar_t *sys_file);
 static void system_save_sysfile(const wchar_t *sys_file);
 
-HRESULT system_init(const struct system_config *cfg, const struct vfs_config *vfs_cfg)
-{
+HRESULT system_init(const struct system_config *cfg,
+                    const struct vfs_config *vfs_cfg) {
     HRESULT hr;
     wchar_t sys_file_path[MAX_PATH];
 
     assert(cfg != NULL);
     assert(vfs_cfg != NULL);
 
-    if (!cfg->enable)
-    {
+    if (!cfg->enable) {
         return S_FALSE;
     }
 
@@ -78,13 +73,13 @@ HRESULT system_init(const struct system_config *cfg, const struct vfs_config *vf
     return S_OK;
 }
 
-static void system_read_sysfile(const wchar_t *sys_file)
-{
+static void system_read_sysfile(const wchar_t *sys_file) {
     FILE *f = _wfopen(sys_file, L"r");
 
-    if (f == NULL)
-    {
-        dprintf("System: First run detected, system settings can only be applied AFTER the first run\n");
+    if (f == NULL) {
+        dprintf(
+            "System: First run detected, system settings can only be applied "
+            "AFTER the first run\n");
         return;
     }
 
@@ -92,8 +87,7 @@ static void system_read_sysfile(const wchar_t *sys_file)
     long file_size = ftell(f);
     fseek(f, 0, SEEK_SET);
 
-    if (file_size != 0x6000)
-    {
+    if (file_size != 0x6000) {
         dprintf("System: Invalid sysfile.dat file size\n");
         fclose(f);
 
@@ -106,11 +100,11 @@ static void system_read_sysfile(const wchar_t *sys_file)
 
     // copy the credit_block and dip_switch_block from the sysfile.dat
     memcpy(&system_info.credit_block, system_info.data, BLOCK_SIZE);
-    memcpy(&system_info.dip_switch_block, system_info.data + 0x2800, BLOCK_SIZE);
+    memcpy(&system_info.dip_switch_block, system_info.data + 0x2800,
+           BLOCK_SIZE);
 }
 
-static void system_save_sysfile(const wchar_t *sys_file)
-{
+static void system_save_sysfile(const wchar_t *sys_file) {
     char block[BLOCK_SIZE];
     uint8_t system = 0;
     uint8_t freeplay = 0;
@@ -118,24 +112,28 @@ static void system_save_sysfile(const wchar_t *sys_file)
     // open the sysfile.dat for writing in bytes mode
     FILE *f = _wfopen(sys_file, L"rb+");
 
-    if (f == NULL)
-    {
+    if (f == NULL) {
         return;
     }
 
     // write the system_config.system to the dip_switch_block
-    for (int i = 0; i < 8; i++)
-    {
-        if (system_config.dipsw[i])
-        {
-            // print which system is enabled
+    for (int i = 0; i < 8; i++) {
+        // print the dip switch configuration with labels if present
+        if (system_config.dipsw_config[i].label[0] != L'\0') {
+            dprintf("System: %ls: %ls\n", system_config.dipsw_config[i].label,
+                    system_config.dipsw[i] ? system_config.dipsw_config[i].on
+                                           : system_config.dipsw_config[i].off);
+        } else if (system_config.dipsw[i]) {
             dprintf("System: DipSw%d=1 set\n", i + 1);
+        }
+
+        // set the system variable to the dip switch configuration
+        if (system_config.dipsw[i]) {
             system |= (1 << i);
         }
     }
 
-    if (system_config.freeplay)
-    {
+    if (system_config.freeplay) {
         // print that freeplay is enabled
         dprintf("System: Freeplay enabled\n");
         freeplay = 1;
@@ -149,10 +147,10 @@ static void system_save_sysfile(const wchar_t *sys_file)
     // calculate the new checksum, skip the old crc32 value
     // which is at the beginning of the block, thats's why the +4
     // conver the struct to chars in order for the crc32 calculation to work
-    system_info.credit_block.checksum = crc32(
-        (char *)&system_info.credit_block + 4, BLOCK_SIZE - 4, 0);
-    system_info.dip_switch_block.checksum = crc32(
-        (char *)&system_info.dip_switch_block + 4, BLOCK_SIZE - 4, 0);
+    system_info.credit_block.checksum =
+        crc32((char *)&system_info.credit_block + 4, BLOCK_SIZE - 4, 0);
+    system_info.dip_switch_block.checksum =
+        crc32((char *)&system_info.dip_switch_block + 4, BLOCK_SIZE - 4, 0);
 
     // build the new credit block
     memcpy(block, (char *)&system_info.credit_block, BLOCK_SIZE);
diff --git a/platform/system.h b/platform/system.h
index ba0f2a6..e69ce90 100644
--- a/platform/system.h
+++ b/platform/system.h
@@ -7,10 +7,20 @@
 
 #include "platform/vfs.h"
 
+
+struct dipsw_config
+{
+    wchar_t label[MAX_PATH];
+    wchar_t on[MAX_PATH];
+    wchar_t off[MAX_PATH];
+};
+
+
 struct system_config {
     bool enable;
     bool freeplay;
     bool dipsw[8];
+    struct dipsw_config dipsw_config[8];
 };
 
 HRESULT system_init(const struct system_config *cfg, const struct vfs_config *vfs_cfg);
diff --git a/swdchook/config.c b/swdchook/config.c
index fcfa251..e64654e 100644
--- a/swdchook/config.c
+++ b/swdchook/config.c
@@ -23,7 +23,8 @@ void led15070_config_load(struct led15070_config *cfg, const wchar_t *filename)
     wchar_t tmpstr[16];
 
     cfg->enable = GetPrivateProfileIntW(L"led15070", L"enable", 1, filename);
-    cfg->port_no = GetPrivateProfileIntW(L"led15070", L"portNo", 0, filename);
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15070", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15070", L"portNo2", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15070", L"fwVer", 0x90, filename);
     /* TODO: Unknown, no firmware file available */
     cfg->fw_sum = GetPrivateProfileIntW(L"led15070", L"fwSum", 0xdead, filename);
diff --git a/swdchook/dllmain.c b/swdchook/dllmain.c
index d83798c..5932a69 100644
--- a/swdchook/dllmain.c
+++ b/swdchook/dllmain.c
@@ -100,8 +100,9 @@ static DWORD CALLBACK swdc_pre_startup(void)
     }
 
     /* Not working, different board -04 instead of -02? */
+    unsigned int led_port_no[2] = {2, 0};
     hr = led15070_hook_init(&swdc_hook_cfg.led15070, swdc_dll.led_init, 
-        swdc_dll.led_set_fet_output, NULL, swdc_dll.led_gs_update, 2, 1);
+        swdc_dll.led_set_fet_output, NULL, swdc_dll.led_gs_update, led_port_no);
 
     if (FAILED(hr)) {
         goto fail;
diff --git a/swdchook/io4.c b/swdchook/io4.c
index be1d4b9..679a646 100644
--- a/swdchook/io4.c
+++ b/swdchook/io4.c
@@ -203,7 +203,7 @@ static HRESULT swdc_io4_write_gpio(uint8_t* payload, size_t len)
         lights_data & SWDC_IO_LED_LEFT ? 0xFF : 0x00,
     };
 
-    swdc_dll.led_set_leds(rgb_out);
+    swdc_dll.led_set_leds(0, rgb_out);
 
     return S_OK;
 }
diff --git a/swdchook/swdc-dll.h b/swdchook/swdc-dll.h
index 1b81e26..7539d1c 100644
--- a/swdchook/swdc-dll.h
+++ b/swdchook/swdc-dll.h
@@ -11,9 +11,9 @@ struct swdc_dll {
     void (*get_gamebtns)(uint16_t *gamebtn);
     void (*get_analogs)(struct swdc_io_analog_state *out);
     HRESULT (*led_init)(void);
-    void (*led_set_fet_output)(const uint8_t *rgb);
-    void (*led_gs_update)(const uint8_t *rgb);
-    void (*led_set_leds)(const uint8_t *rgb);
+    void (*led_set_fet_output)(uint8_t board, const uint8_t *rgb);
+    void (*led_gs_update)(uint8_t board, const uint8_t *rgb);
+    void (*led_set_leds)(uint8_t board, const uint8_t *rgb);
     HRESULT (*ffb_init)(void);
     void (*ffb_toggle)(bool active);
     void (*ffb_constant_force)(uint8_t direction, uint8_t force);
diff --git a/swdcio/dllmain.c b/swdcio/dllmain.c
index 8057e23..a35b8e8 100644
--- a/swdcio/dllmain.c
+++ b/swdcio/dllmain.c
@@ -119,7 +119,7 @@ HRESULT swdc_io_led_init(void)
     return S_OK;
 }
 
-void swdc_io_led_set_fet_output(const uint8_t *rgb)
+void swdc_io_led_set_fet_output(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     dprintf("SWDC LED: LEFT SEAT LED: %02X\n", rgb[0]);
@@ -129,7 +129,7 @@ void swdc_io_led_set_fet_output(const uint8_t *rgb)
     return;
 }
 
-void swdc_io_led_gs_update(const uint8_t *rgb)
+void swdc_io_led_gs_update(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     for (int i = 0; i < 9; i++) {
@@ -141,7 +141,7 @@ void swdc_io_led_gs_update(const uint8_t *rgb)
     return;
 }
 
-void swdc_io_led_set_leds(const uint8_t *rgb)
+void swdc_io_led_set_leds(uint8_t board, const uint8_t *rgb)
 {
 #if 0
     dprintf("SWDC LED: START: %02X\n", rgb[0]);
diff --git a/swdcio/swdcio.h b/swdcio/swdcio.h
index 6843634..9d069f3 100644
--- a/swdcio/swdcio.h
+++ b/swdcio/swdcio.h
@@ -123,7 +123,7 @@ HRESULT swdc_io_led_init(void);
 
    Minimum API version: 0x0101 */
 
-void swdc_io_led_set_fet_output(const uint8_t *rgb);
+void swdc_io_led_set_fet_output(uint8_t board, const uint8_t *rgb);
 
 /* Update the RGB LEDs. rgb is a pointer to an array up to 32 * 4 = 128 bytes. 
 
@@ -140,7 +140,7 @@ void swdc_io_led_set_fet_output(const uint8_t *rgb);
 
    Minimum API version: 0x0101 */
 
-void swdc_io_led_gs_update(const uint8_t *rgb);
+void swdc_io_led_gs_update(uint8_t board, const uint8_t *rgb);
 
 /* Update the cabinet button LEDs. rgb is a pointer to an array up to 6 bytes.
 
@@ -156,7 +156,7 @@ void swdc_io_led_gs_update(const uint8_t *rgb);
 
    Minimum API version: 0x0101 */
 
-void swdc_io_led_set_leds(const uint8_t *rgb);
+void swdc_io_led_set_leds(uint8_t board, const uint8_t *rgb);
 
 /* Initialize FFB emulation. This function will be called before any
    other swdc_io_ffb_*() function calls.
diff --git a/tokyohook/config.c b/tokyohook/config.c
index 304cbc2..3ab387a 100644
--- a/tokyohook/config.c
+++ b/tokyohook/config.c
@@ -40,7 +40,8 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
     memset(cfg->boot_chip_number, ' ', sizeof(cfg->boot_chip_number));
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
-    cfg->port_no = GetPrivateProfileIntW(L"led15093", L"portNo", 0, filename);
+    cfg->port_no[0] = GetPrivateProfileIntW(L"led15093", L"portNo1", 0, filename);
+    cfg->port_no[1] = GetPrivateProfileIntW(L"led15093", L"portNo2", 0, filename);
     cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0x90, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xAED9, filename);
diff --git a/tokyohook/dllmain.c b/tokyohook/dllmain.c
index 19a1517..9c3a262 100644
--- a/tokyohook/dllmain.c
+++ b/tokyohook/dllmain.c
@@ -50,6 +50,16 @@ static DWORD CALLBACK tokyo_pre_startup(void)
 
     /* Initialize emulation hooks */
 
+    struct dipsw_config new_dipsw_config[8] = {
+        {L"Delivery Server", L"Server", L"Client"},
+        {L"Cabinet ID Setting", L"ON", L"OFF"},
+        {L"Cabinet ID Setting", L"ON", L"OFF"},
+    };
+
+    // Set the system dip switch configuration
+    memcpy(tokyo_hook_cfg.platform.system.dipsw_config, new_dipsw_config,
+           sizeof(new_dipsw_config));
+
     hr = platform_hook_init(
             &tokyo_hook_cfg.platform,
             "SDFV",
@@ -60,14 +70,35 @@ static DWORD CALLBACK tokyo_pre_startup(void)
         goto fail;
     }
 
+    bool *dipsw = &tokyo_hook_cfg.platform.system.dipsw[0];
+    unsigned int cabinet_id = 0;
+
+    if (dipsw[0] == 1 && dipsw[1] == 0 && dipsw[2] == 0) {
+        cabinet_id = 1; // Server 1
+    } else if (dipsw[0] == 0 && dipsw[1] == 1 && dipsw[2] == 0) {
+        cabinet_id = 2; // Client 2
+    } else if (dipsw[0] == 0 && dipsw[1] == 0 && dipsw[2] == 1) {
+        cabinet_id = 3; // Client 3
+    } else if (dipsw[0] == 0 && dipsw[1] == 1 && dipsw[2] == 1) {
+        cabinet_id = 4; // Client 4
+    } else {
+        dprintf("Error: Invalid dip switch configuration!\n");
+    }
+
+    // Print the correct Cabinet ID if valid
+    if (cabinet_id > 0) {
+        dprintf("System: Cabinet ID %d\n", cabinet_id);
+    }
+
     hr = tokyo_dll_init(&tokyo_hook_cfg.dll, tokyo_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
     }
 
+    unsigned int led_port_no[2] = {1, 0};
     hr = led15093_hook_init(&tokyo_hook_cfg.led15093, 
-        tokyo_dll.led_init, tokyo_dll.led_set_leds, 1, 1, 1, 2);
+        tokyo_dll.led_init, tokyo_dll.led_set_leds, led_port_no);
 
     if (FAILED(hr)) {
         return hr;