diff --git a/.github/calcrom/calcrom.pl b/.github/calcrom/calcrom.pl
deleted file mode 100755
index ef0bf4149..000000000
--- a/.github/calcrom/calcrom.pl
+++ /dev/null
@@ -1,197 +0,0 @@
-#!/usr/bin/perl
-
-# Usage:
-#   calcrom.pl <mapfile> [--verbose][--data]
-#
-#   mapfile: path to .map file output by LD
-#   verbose: set to get more detailed output
-#   data: set to output % breakdown of data
-
-use IPC::Cmd qw[ run ];
-use Getopt::Long;
-
-my $usage = "Usage: calcrom.pl file.map [--verbose][--data]\n";
-my $verbose = "";
-my $showData;
-
-GetOptions("verbose" => \$verbose, "data" => \$showData) or die $usage;
-(@ARGV == 1)
-    or die $usage;
-open(my $file, $ARGV[0])
-    or die "ERROR: could not open file '$ARGV[0]'.\n";
-
-my $src = 0;
-my $asm = 0;
-my $srcdata = 0;
-my $data = 0;
-my @pairs = ();
-while (my $line = <$file>)
-{
-    if ($line =~ /^ \.(\w+)\s+0x[0-9a-f]+\s+(0x[0-9a-f]+) (\w+)\/(.+)\.o/)
-    {
-        my $section = $1;
-        my $size = hex($2);
-        my $dir = $3;
-        my $basename = $4;
-        if ($size & 3)
-        {
-            $size += 4 - ($size % 3);
-        }
-
-        if ($section =~ /text/)
-        {
-            if ($dir eq 'src')
-            {
-                $src += $size;
-            }
-            elsif ($dir eq 'asm')
-            {
-                if (!($basename =~ /(crt0|libagbsyscall|libgcnmultiboot|m4a_1)/))
-                {
-                    push @pairs, [$basename, $size];
-                }
-                $asm += $size;
-            }
-        }
-        elsif ($section =~ /rodata/)
-        {
-            if ($dir eq 'src')
-            {
-                $srcdata += $size;
-            }
-            elsif ($dir eq 'data')
-            {
-                $data += $size;
-            }
-        }
-    }
-}
-
-my @sorted = sort { $a->[1] <=> $b->[1] } @pairs;
-(my $elffname = $ARGV[0]) =~ s/\.map/.elf/;
-
-# Note that the grep filters out all branch labels. It also requires a minimum
-# line length of 5, to filter out a ton of generated symbols (like AcCn). No
-# settings to nm seem to remove these symbols. Finally, nm prints out a separate
-# entry for whenever a name appears in a file, not just where it's defined. uniq
-# removes all the duplicate entries.
-#
-#
-# You'd expect this to take a while, because of uniq. It runs in under a second,
-# though. Uniq is pretty fast!
-my $base_cmd = "nm $elffname | awk '{print \$3}' | grep '^[^_].\\{4\\}' | uniq";
-
-# This looks for Unknown_, Unknown_, or sub_, followed by an address. Note that
-# it matches even if stuff precedes the unknown, like sUnknown/gUnknown.
-my $undoc_regex = "'[Uu]nknown_[0-9a-fA-F]\\{5,7\\}\\|sub_[0-9a-fA-F]\\{5,7\\}'";
-
-# This looks for every symbol with an address at the end of it. Some things are
-# given a name based on their type / location, but still have an unknown purpose.
-# For example, FooMap_EventScript_FFFFFFF.
-# The above may be double counted here, and will need to be filtered out.
-my $partial_doc_regex = "'_[0-28][0-9a-fA-F]\\{5,7\\}'";
-
-my $count_cmd = "wc -l";
-
-# It sucks that we have to run this three times, but I can't figure out how to get
-# stdin working for subcommands in perl while still having a timeout. It's decently
-# fast anyway.
-my $total_syms_as_string;
-(run (
-    command => "$base_cmd | $count_cmd",
-    buffer => \$total_syms_as_string,
-    timeout => 60
-))
-    or die "ERROR: Error while getting all symbols: $?";
-
-my $undocumented_as_string;
-(run (
-    command => "$base_cmd | grep $undoc_regex | $count_cmd",
-    buffer => \$undocumented_as_string,
-    timeout => 60
-))
-    or die "ERROR: Error while filtering for undocumented symbols: $?";
-
-my $partial_documented_as_string;
-(run (
-    command => "$base_cmd | grep $partial_doc_regex | grep -v $undoc_regex | $count_cmd",
-    buffer => \$partial_documented_as_string,
-    timeout => 60
-))
-    or die "ERROR: Error while filtering for partial symbols: $?";
-
-# Performing addition on a string converts it to a number. Any string that fails
-# to convert to a number becomes 0. So if our converted number is 0, but our string
-# is nonzero, then the conversion was an error.
-$undocumented_as_string =~ s/^\s+|\s+$//g;
-my $undocumented = $undocumented_as_string + 0;
-(($undocumented != 0) or (($undocumented == 0) and ($undocumented_as_string eq "0")))
-    or die "ERROR: Cannot convert string to num: '$undocumented_as_string'";
-
-$partial_documented_as_string =~ s/^\s+|\s+$//g;
-my $partial_documented = $partial_documented_as_string + 0;
-(($partial_documented != 0) or (($partial_documented == 0) and ($partial_documented_as_string eq "0")))
-    or die "ERROR: Cannot convert string to num: '$partial_documented_as_string'";
-
-$total_syms_as_string =~ s/^\s+|\s+$//g;
-my $total_syms = $total_syms_as_string + 0;
-(($total_syms != 0) or (($total_syms == 0) and ($total_syms_as_string eq "0")))
-    or die "ERROR: Cannot convert string to num: '$total_syms_as_string'";
-
-($total_syms != 0)
-    or die "ERROR: No symbols found.";
-
-my $total = $src + $asm;
-my $srcPct = sprintf("%.4f", 100 * $src / $total);
-my $asmPct = sprintf("%.4f", 100 * $asm / $total);
-
-my $documented = $total_syms - ($undocumented + $partial_documented);
-my $docPct = sprintf("%.4f", 100 * $documented / $total_syms);
-my $partialPct = sprintf("%.4f", 100 * $partial_documented / $total_syms);
-my $undocPct = sprintf("%.4f", 100 * $undocumented / $total_syms);
-
-if ($asm == 0)
-{
-    print "Code decompilation is 100% complete\n"
-}
-else
-{
-    print "$total total bytes of code\n";
-    print "$src bytes of code in src ($srcPct%)\n";
-    print "$asm bytes of code in asm ($asmPct%)\n";
-}
-print "\n";
-
-if ($verbose != 0)
-{
-    print "BREAKDOWN\n";
-    foreach my $item (@sorted)
-    {
-        print "    $item->[1] bytes in asm/$item->[0].s\n"
-    }
-    print "\n";
-}
-
-if ($partial_documented == 0 && $undocumented == 0)
-{
-    print "Documentation is 100% complete\n"
-}
-else
-{
-    print "$total_syms total symbols\n";
-    print "$documented symbols documented ($docPct%)\n";
-    print "$partial_documented symbols partially documented ($partialPct%)\n";
-    print "$undocumented symbols undocumented ($undocPct%)\n";
-}
-
-if ($showData)
-{
-    print "\n";
-
-    my $dataTotal = $srcdata + $data;
-    my $srcDataPct = sprintf("%.4f", 100 * $srcdata / $dataTotal);
-    my $dataPct = sprintf("%.4f", 100 * $data / $dataTotal);
-    print "$dataTotal total bytes of data\n";
-    print "$srcdata bytes of data in src ($srcDataPct%)\n";
-    print "$data bytes of data in data ($dataPct%)\n";
-}
diff --git a/.github/calcrom/webhook.sh b/.github/calcrom/webhook.sh
deleted file mode 100755
index fd54b660b..000000000
--- a/.github/calcrom/webhook.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash -ex
-
-build_name=$1
-map_file=$build_name.map
-if [ ! -f $map_file ]; then
-  echo "$map_file does not exist!"
-  exit 1
-fi
-
-output=$(perl $(dirname "$0")/calcrom.pl $build_name.map | sed -E ':a;N;$!ba;s/\r{0,1}\n/\\n/g')
-curl -d "{\"username\": \"$CALCROM_DISCORD_WEBHOOK_USERNAME\", \"avatar_url\": \"$CALCROM_DISCORD_WEBHOOK_AVATAR_URL\", \"content\":\"\`\`\`\\n$build_name progress:\\n$output\\n\`\`\`\"}" -H "Content-Type: application/json" -X POST "$CALCROM_DISCORD_WEBHOOK_URL"
diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml
deleted file mode 100644
index 7ae5c5844..000000000
--- a/.github/workflows/build.yml
+++ /dev/null
@@ -1,89 +0,0 @@
-name: CI
-
-on:
-  push:
-    branches: [ master ]
-  pull_request:
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    env:
-      GAME_VERSION: FIRERED
-      GAME_LANGUAGE: ENGLISH
-      GAME_REVISION: 0
-      MODERN: 0
-      COMPARE: 1
-    steps:
-      - name: Checkout
-        uses: actions/checkout@master
-
-      - name: Checkout agbcc
-        uses: actions/checkout@master
-        with:
-          path: 'agbcc'
-          repository: 'pret/agbcc'
-
-      - name: Checkout symbols
-        if: ${{ github.event_name == 'push' }}
-        uses: actions/checkout@master
-        with:
-          path: 'symbols'
-          ref: 'symbols'
-
-      - name: Install binutils
-        run: sudo apt install gcc-arm-none-eabi binutils-arm-none-eabi
-        # build-essential, git, and libpng-dev are already installed
-        # gcc-arm-none-eabi is only needed for the modern build
-        # as an alternative to dkP
-
-      - name: Install agbcc
-        run: |
-          ./build.sh
-          ./install.sh ../
-        working-directory: ./agbcc
-
-      - name: Compare FireRed
-        run: |
-          make -j${nproc} all syms
-
-      - name: Compare FireRed rev1
-        env:
-          GAME_REVISION: 1
-        run: |
-          make -j${nproc} all syms
-
-      - name: Compare LeafGreen
-        env:
-          GAME_VERSION: LEAFGREEN
-        run: |
-          make -j${nproc} all syms
-
-      - name: Compare LeafGreen rev1
-        env:
-          GAME_VERSION: LEAFGREEN
-          GAME_REVISION: 1
-        run: |
-          make -j${nproc} all syms
-
-      - name: Build Modern
-        env:
-          MODERN: 1
-          COMPARE: 0
-        run: |
-          make -j${nproc} all
-
-      - name: Move symfiles
-        if: ${{ github.event_name == 'push' }}
-        run: |
-          cp *.sym symbols/
-          echo "SYMBOLS_COMMIT_MSG=$( git log --format=%s ${GITHUB_SHA} )" >> $GITHUB_ENV
-
-      - name: Update symfiles
-        if: ${{ github.event_name == 'push' }}
-        uses: EndBug/add-and-commit@v7
-        with:
-          branch: symbols
-          cwd: "./symbols"
-          add: "*.sym"
-          message: ${{ env.SYMBOLS_COMMIT_MSG }}