diff --git a/.travis/calcrom/calcrom/calcrom.pl b/.travis/calcrom/calcrom/calcrom.pl
deleted file mode 100755
index 5fe966eca..000000000
--- a/.travis/calcrom/calcrom/calcrom.pl
+++ /dev/null
@@ -1,204 +0,0 @@
-#!/usr/bin/perl
-
-use IPC::Cmd qw[ run ];
-
-(@ARGV == 1)
-    or die "ERROR: no map file specified.\n";
-open(my $file, $ARGV[0])
-    or die "ERROR: could not open file '$ARGV[0]'.\n";
-
-my $src = 0;
-my $asm = 0;
-my $srcdata = 0;
-my $data = 0;
-while (my $line = <$file>)
-{
-    if ($line =~ /^ \.(\w+)\s+0x[0-9a-f]+\s+(0x[0-9a-f]+) (\w+)\/.+\.o/)
-    {
-        my $section = $1;
-        my $size = hex($2);
-        my $dir = $3;
-
-        if ($section =~ /text/)
-        {
-            if ($dir eq 'src')
-            {
-                $src += $size;
-            }
-            elsif ($dir eq 'asm')
-            {
-                $asm += $size;
-            }
-        }
-        elsif ($section =~ /rodata/)
-        {
-            if ($dir eq 'src')
-            {
-                $srcdata += $size;
-            }
-            elsif ($dir eq 'data')
-            {
-                $data += $size;
-            }
-        }
-    }
-}
-
-(my $elffname = $ARGV[0]) =~ s/\.map/.elf/;
-
-# Note that the grep filters out all branch labels. It also requires a minimum
-# line length of 5, to filter out a ton of generated symbols (like AcCn). No
-# settings to nm seem to remove these symbols. Finally, nm prints out a separate
-# entry for whenever a name appears in a file, not just where it's defined. uniq
-# removes all the duplicate entries.
-#
-#
-# You'd expect this to take a while, because of uniq. It runs in under a second,
-# though. Uniq is pretty fast!
-my $base_cmd = "nm $elffname | awk '{print \$3}' | grep '^[^_].\\{4\\}' | uniq";
-
-# This looks for Unknown_, Unknown_, or sub_, followed by just numbers. Note that
-# it matches even if stuff precedes the unknown, like sUnknown/gUnknown.
-# 'sub_' anchors to the start so it does not consider symbols like 'nullsub_12' undocumented.
-my $undoc_cmd = "grep -E '[Uu]nknown_[0-9a-fA-F]*|^sub_[0-9a-fA-F]*'";
-
-# This looks for every symbol with an address at the end of it. Some things are
-# given a name based on their type / location, but still have an unknown purpose.
-# For example, FooMap_EventScript_FFFFFFF.
-my $partial_doc_cmd = "grep '_[0-38-9][0-9a-fA-F]\\{5,6\\}'";
-
-my $count_cmd = "wc -l";
-
-my $incbin_cmd = "find \"\$(dirname $elffname)\" \\( -name '*.s' -o -name '*.inc' \\) -exec cat {} ';' | grep -oE '^\\s*\\.incbin\\s*\"[^\"]+\"\s*,\\s*(0x)?[0-9a-fA-F]+\\s*,\\s*(0x)?[0-9a-fA-F]+' -";
-
-# It sucks that we have to run this three times, but I can't figure out how to get
-# stdin working for subcommands in perl while still having a timeout. It's decently
-# fast anyway.
-my $total_syms_as_string;
-(run (
-    command => "$base_cmd | $count_cmd",
-    buffer => \$total_syms_as_string,
-    timeout => 60
-))
-    or die "ERROR: Error while getting all symbols: $?";
-
-my $undocumented_as_string;
-(run (
-    command => "$base_cmd | $undoc_cmd | $count_cmd",
-    buffer => \$undocumented_as_string,
-    timeout => 60
-))
-    or die "ERROR: Error while filtering for undocumented symbols: $?";
-
-my $partial_documented_as_string;
-(run (
-    command => "$base_cmd | $partial_doc_cmd | $count_cmd",
-    buffer => \$partial_documented_as_string,
-    timeout => 60
-))
-    or die "ERROR: Error while filtering for partial symbols: $?";
-
-my $incbin_count_as_string;
-(run (
-    command => "$incbin_cmd | $count_cmd",
-    buffer => \$incbin_count_as_string,
-    timeout => 60
-))
-    or die "ERROR: Error while counting incbins: $?";
-
-my $incbin_bytes_as_string;
-(run (
-    command => "(echo -n 'ibase=16;' ; $incbin_cmd | sed -E 's/.*,\\s*0x([0-9a-fA-F]+)/\\1/' | tr '\\n' '+'; echo '0' ) | bc",
-    buffer => \$incbin_bytes_as_string,
-    timeout => 60
-))
-    or die "ERROR: Error while calculating incbin totals: $?";
-
-# Performing addition on a string converts it to a number. Any string that fails
-# to convert to a number becomes 0. So if our converted number is 0, but our string
-# is nonzero, then the conversion was an error.
-my $undocumented = $undocumented_as_string + 0;
-(($undocumented != 0) and ($undocumented_as_string ne "0"))
-    or die "ERROR: Cannot convert string to num: '$undocumented_as_string'";
-
-my $partial_documented = $partial_documented_as_string + 0;
-(($partial_documented != 0) and ($partial_documented_as_string ne "0"))
-	or die "ERROR: Cannot convert string to num: '$partial_documented_as_string'";
-
-my $total_syms = $total_syms_as_string + 0;
-(($total_syms != 0) and ($total_syms_as_string ne "0"))
-    or die "ERROR: Cannot convert string to num: '$total_syms_as_string'";
-
-($total_syms != 0)
-    or die "ERROR: No symbols found.";
-
-my $incbin_count = $incbin_count_as_string + 0;
-(($incbin_count != 0) and ($incbin_count_as_string ne "0"))
-    or die "ERROR: Cannot convert string to num: '$incbin_count_as_string'";
-
-my $incbin_bytes = $incbin_bytes_as_string + 0;
-(($incbin_bytes != 0) and ($incbin_bytes_as_string ne "0"))
-    or die "ERROR: Cannot convert string to num: '$incbin_bytes_as_string'";
-
-
-my $total = $src + $asm;
-my $srcPct = sprintf("%.4f", 100 * $src / $total);
-my $asmPct = sprintf("%.4f", 100 * $asm / $total);
-
-# partial_documented is double-counting the unknown_* and sub_* symbols.
-$partial_documented = $partial_documented - $undocumented;
-
-my $documented = $total_syms - ($undocumented + $partial_documented);
-my $docPct = sprintf("%.4f", 100 * $documented / $total_syms);
-my $partialPct = sprintf("%.4f", 100 * $partial_documented / $total_syms);
-my $undocPct = sprintf("%.4f", 100 * $undocumented / $total_syms);
-
-if ($asm == 0)
-{
-    print "Code decompilation is 100% complete\n"
-}
-else
-{
-    print "$total total bytes of code\n";
-    print "$src bytes of code in src ($srcPct%)\n";
-    print "$asm bytes of code in asm ($asmPct%)\n";
-}
-print "\n";
-
-if ($partial_documented == 0 && $undocumented == 0)
-{
-    print "Documentation is 100% complete\n"
-}
-else
-{
-    print "$total_syms total symbols\n";
-    print "$documented symbols documented ($docPct%)\n";
-    print "$partial_documented symbols partially documented ($partialPct%)\n";
-    print "$undocumented symbols undocumented ($undocPct%)\n";
-}
-
-print "\n";
-my $dataTotal = $srcdata + $data;
-my $srcDataPct = sprintf("%.4f", 100 * $srcdata / $dataTotal);
-my $dataPct = sprintf("%.4f", 100 * $data / $dataTotal);
-
-my $incPct = sprintf("%.4f", 100 * $incbin_bytes / $dataTotal);
-
-if ($data == 0)
-{
-    print "Data porting to C is 100% complete\n"
-}
-else
-{
-    print "$dataTotal total bytes of data\n";
-    print "$srcdata bytes of data in src ($srcDataPct%)\n";
-    print "$data bytes of data in data ($dataPct%)\n";
-}
-
-print "\n";
-
-if ($incbin_count == 0) {
-    print "All incbins have been eliminated\n"
-} else {
-    print "$incbin_bytes bytes of data in $incbin_count incbins ($incPct%)\n"
-}
diff --git a/.travis/calcrom/calcrom/webhook.sh b/.travis/calcrom/calcrom/webhook.sh
deleted file mode 100755
index 86da74c87..000000000
--- a/.travis/calcrom/calcrom/webhook.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash -ex
-
-# Only run this script if it's the master branch build.
-if [[ "$TRAVIS_BRANCH" != "master" || "$TRAVIS_PULL_REQUEST" != "false" ]]; then
-  exit 0
-fi
-
-build_name=$1
-map_file=$build_name.map
-if [ ! -f $map_file ]; then
-  echo "$map_file does not exist!"
-  exit 1
-fi
-
-output=$(perl $(dirname "$0")/calcrom.pl $build_name.map | sed -E ':a;N;$!ba;s/\r{0,1}\n/\\n/g')
-curl -d "{\"username\": \"$CALCROM_DISCORD_WEBHOOK_USERNAME\", \"avatar_url\": \"$CALCROM_DISCORD_WEBHOOK_AVATAR_URL\", \"content\":\"\`\`\`$build_name progress:\\n$output\`\`\`\"}" -H "Content-Type: application/json" -X POST $CALCROM_DISCORD_WEBHOOK_URL