Default values for settings need to be the same in Kotlin and C++,
otherwise settings that haven't been changed by the user will be shown
as having one value in the Android GUI but treated as having a different
value in the core.
This lets users select Triforce Baseboard for SI and SP1. Limitations:
* The test, service and coin buttons can be bound to gamepads and other
physical inputs, but aren't available in the touch input overlay.
* The IP redirections are exposed to the user as a raw string rather than
a table like in DolphinQt.
The functions SaveToSYSCONF and LoadFromSYSCONF contain checks for
whether emulation is running. The intent of this is that when we're
emulating a Wii, the emulated system may write to SYSCONF whenever it
likes and does not expect anything else to write to SYSCONF, so the
host code shouldn't access SYSCONF while emulation is ongoing. However,
Core::IsRunning is an imperfect proxy for whether we've handed over
control of SYSCONF to the emulated system yet, as the actual handover
happens at a slightly different point in time than when the emulation
state is changed. This usually isn't a problem, but in theory it could
be a determinism problem if a setting is changed right as emulation is
starting, or it could cause the emulated software to briefly misbehave
if a setting is changed right as emulation is stopping.
Things got worse in 72cf2bdb87 when I
replaced the Core::IsRunning calls with !Core::IsUninitialized. With
IsRunning, there was be a period of time where SYSCONF should have been
protected but wasn't. With !IsUninitialized, there was a period of time
where SYSCONF shouldn't have been protected but was, and crucially, this
period of time included the moments where we do setup and teardown of
the emulated NAND, which broke transferring SYSCONF settings between the
host and the guest. 72cf2bdb87 was
reverted because of this.
This commit adds a flag that we explicitly flip when control is handed
over to or from the emulated system. This protects the SYSCONF file
for exactly as long as is needed.
Previously, when an input device was connected or disconnected, we would
recreate all devices. This commit makes it so we only touch the relevant
device instead. This matters because recreating a device causes us to
drop all held buttons for that device. Due to Android only delivering
inputs as events, we're unable to poll for currently held buttons when
recreating a device.
This recently became a problem for users of Ayn devices due to a
firmware update. Every now and then, something about the display
viewports changes, triggering an update to an input device that I assume
is a touch input device. This input device isn't something users
normally map in Dolphin's controller settings, but it changing was
causing Dolphin to drop all held buttons for the device's built-in
gamepad as well as any other connected gamepads.
* This fixes some UI elements (3-dot menu background, status bar when scrolling down in settings) not following Material You colors.
* It doesn't cause any issues on Android versions without dynamic colors (tested on Android 9, 11, 16)
Signed-off-by: Leonardo Ledda <leonardoledda@gmail.com>
This is an Android port of 7ed61c50a1. It looks like we don't have
descriptions for any of the RetroAchievements settings in the Android
GUI, so I haven't added descriptions for these two new settings either.
LoginDialog sets these to gone when a login starts or fails. Whether we
use gone or invisible needs to be consistent between LoginDialog and the
XML file, otherwise we'll blank space that shows up or disappears when
login starts or fails.
We only use this class in one in one single function since its introduction with 12aa1071cb in 2021. If we do need it elsewhere we can always bring it back.
These settings were recently changed with 113c86f1b4 to be floats instead of ints.
This commit also changes the Android UI to use the direct convergence value instead of the percentage to match the Qt UI.
We were previously excluding this folder from Android builds because it
didn't contain any files that were used on Android. However, we now have
an OSD font file that we do want to use on Android, and there's also a
few PNG files that will be needed by the RetroAchievements integration.
In terms of file size, this is what gets added:
OSD font: 48.1 KiB
RetroAchievements graphics: 3.5 KiB
Unused graphics: 116.8 KiB
We're still excluding Sys/Themes/, which is 1.1 MiB and entirely unused.
Sliders can trigger change listeners very rapidly, so let's add some
rate limiting so dragging a slider doesn't cause the whole UI to lag.
(Now the input overlay looks laggy when dragging a slider, though.)
In the dialog where you can choose what controller the input overlay
should be controlling, there's an OK button. If you change controller
but don't press OK, your selection will be saved, but the input overlay
won't refresh to show the new controller unless you perform some other
action that would cause it to refresh. This is not good UX.
This commit changes the behavior not only of this dialog but also other
dialogs spawned by EmulationActivity so that everything is properly
updated when dismissing a dialog, as if you had pressed OK.
extractNativeLibs is deprecated. Native lib packaging is already controlled by
packaging.jniLibs.useLegacyPackaging (which we already have), so the manifest override is unnecessary.
The core no longer cares which thread is the host thread.
Cleaning up Android's HostThreadLock is left for another PR, in part
because the HostThreadLock in NativeConfig.cpp still serves a purpose,
and in part to make any issues easier to bisect.
Tapping outside the System Update dialog would previously close it and leave the update in a partially canceled, inconsistent state. This change disables outside-touch dismissal to avoid accidental interruptions and ensure the process completes cleanly.
If bind was called more than once for a SwitchSettingViewHolder, the
line `binding.settingSwitch.isChecked = setting.isChecked` would
accidentally trigger the listener registered during the previous bind
call.
We can now route Android analytics through Common::HttpAnalyticsBackend, drop the Volley sender, and keep the JNI layer limited to only transfer metadata since https://bugs.dolphin-emu.org/issues/11772 has been fixed.
In a few places in Dolphin, we're using BottomSheetDialogFragments.
These unhelpfully tend to start out in a "collapsed" state when in
landscape mode (presumably depending on factors like screen size). The
user then has to manually expand them before they can meaningfully
interact with them.
We've been automatically setting BottomSheetDialogFragments to the
expanded state if the device Dolphin is running on doesn't support
touch, since with d-pad navigation it's impossible to expand these
sheets. But I think we should set them to expanded on devices that
support touch too. I haven't encountered a single case where you can do
anything useful with any of Dolphin's BottomSheetDialogFragments while
they're collapsed, so the user always has to expand sheets manually if
they start out collapsed. And just because a device supports touch
doesn't necessarily mean you're interacting with it through the touch
screen right now - you could be using a gamepad, for instance.
Remove "env, " from "return env, GetControlPointer..." since the left
side of a comma operator has no effect.
This was presumably a copy/paste error from the function above it.
Preserve the configured logging verbosity unless the user actually
changes it, rather than capping it to LINFO on release builds.
Rename LogManager::m_level to m_effective_level and distinguish between
the config and effective level in various function/variable names.
Make m_effective_level atomic to prevent data races when setting the
effective log level from the config changed callback.
Adds `DocumentsContract.Root.FLAG_SUPPORTS_IS_CHILD` to the list of the flags in order to show up for third-party apps for easier file syncing with local/cloud file server providers
Adds `DocumentsContract.Root.FLAG_LOCAL_ONLY` to the list of the flags in order to show up for third-party apps for easier file syncing with local/cloud file server providers
Remove Host_RefreshDSPDebuggerWindow (which hasn't done anything since
DolphinWX was removed in 44b22c90) and DSP::Host::UpdateDebugger (which
only called Host_RefreshDSPDebuggerWindow).
Remove Host_UpdateMainFrame(). The only non-empty call happened in
DolphinNoGUI which called s_update_main_frame_event.Set(), but
DolphinNoGUI never waits on that event.
When 9d9b6d8 changed our target SDK version to Android 16, it made
Android 16 stop calling onBackPressed and stop delivering KEYCODE_BACK
events. Dolphin's code isn't ready for that yet.
Android lets us opt out of this new behavior for now, so let's do so.
But the opt-out will presumably stop working once we start targeting
Android 17, so we're going to have to update Dolphin's code within the
next one or two years to support the replacement API.
We can register a BroadcastReceiver to have Android tell us when a GC
adapter gets connected instead of having a loop where we continuously
call SleepCurrentThread(1000) and poll the current status. When waiting
for a GC adapter to connect, this both reduces power usage and improves
responsiveness.
Note that I made openAdapter get the UsbDevice that's been stored by the
hotplug code instead of having openAdapter find the UsbDevice on its own
like before. This is only because I want to ensure that the UsbDevice
being tracked for disconnection is the same as the UsbDevice actually
being used, in case the user has multiple adapters connected.
When Android sends Dolphin to the background, emulation *must* pause,
otherwise emulation continues running and continues outputting audio to
the user. RetroAchievements mustn't be allowed to override it.
