These settings were recently changed with 113c86f1b4 to be floats instead of ints.
This commit also changes the Android UI to use the direct convergence value instead of the percentage to match the Qt UI.
We were previously excluding this folder from Android builds because it
didn't contain any files that were used on Android. However, we now have
an OSD font file that we do want to use on Android, and there's also a
few PNG files that will be needed by the RetroAchievements integration.
In terms of file size, this is what gets added:
OSD font: 48.1 KiB
RetroAchievements graphics: 3.5 KiB
Unused graphics: 116.8 KiB
We're still excluding Sys/Themes/, which is 1.1 MiB and entirely unused.
Sliders can trigger change listeners very rapidly, so let's add some
rate limiting so dragging a slider doesn't cause the whole UI to lag.
(Now the input overlay looks laggy when dragging a slider, though.)
In the dialog where you can choose what controller the input overlay
should be controlling, there's an OK button. If you change controller
but don't press OK, your selection will be saved, but the input overlay
won't refresh to show the new controller unless you perform some other
action that would cause it to refresh. This is not good UX.
This commit changes the behavior not only of this dialog but also other
dialogs spawned by EmulationActivity so that everything is properly
updated when dismissing a dialog, as if you had pressed OK.
extractNativeLibs is deprecated. Native lib packaging is already controlled by
packaging.jniLibs.useLegacyPackaging (which we already have), so the manifest override is unnecessary.
The core no longer cares which thread is the host thread.
Cleaning up Android's HostThreadLock is left for another PR, in part
because the HostThreadLock in NativeConfig.cpp still serves a purpose,
and in part to make any issues easier to bisect.
Tapping outside the System Update dialog would previously close it and leave the update in a partially canceled, inconsistent state. This change disables outside-touch dismissal to avoid accidental interruptions and ensure the process completes cleanly.
If bind was called more than once for a SwitchSettingViewHolder, the
line `binding.settingSwitch.isChecked = setting.isChecked` would
accidentally trigger the listener registered during the previous bind
call.
We can now route Android analytics through Common::HttpAnalyticsBackend, drop the Volley sender, and keep the JNI layer limited to only transfer metadata since https://bugs.dolphin-emu.org/issues/11772 has been fixed.
In a few places in Dolphin, we're using BottomSheetDialogFragments.
These unhelpfully tend to start out in a "collapsed" state when in
landscape mode (presumably depending on factors like screen size). The
user then has to manually expand them before they can meaningfully
interact with them.
We've been automatically setting BottomSheetDialogFragments to the
expanded state if the device Dolphin is running on doesn't support
touch, since with d-pad navigation it's impossible to expand these
sheets. But I think we should set them to expanded on devices that
support touch too. I haven't encountered a single case where you can do
anything useful with any of Dolphin's BottomSheetDialogFragments while
they're collapsed, so the user always has to expand sheets manually if
they start out collapsed. And just because a device supports touch
doesn't necessarily mean you're interacting with it through the touch
screen right now - you could be using a gamepad, for instance.
Remove "env, " from "return env, GetControlPointer..." since the left
side of a comma operator has no effect.
This was presumably a copy/paste error from the function above it.
Preserve the configured logging verbosity unless the user actually
changes it, rather than capping it to LINFO on release builds.
Rename LogManager::m_level to m_effective_level and distinguish between
the config and effective level in various function/variable names.
Make m_effective_level atomic to prevent data races when setting the
effective log level from the config changed callback.
Adds `DocumentsContract.Root.FLAG_SUPPORTS_IS_CHILD` to the list of the flags in order to show up for third-party apps for easier file syncing with local/cloud file server providers
Adds `DocumentsContract.Root.FLAG_LOCAL_ONLY` to the list of the flags in order to show up for third-party apps for easier file syncing with local/cloud file server providers
Remove Host_RefreshDSPDebuggerWindow (which hasn't done anything since
DolphinWX was removed in 44b22c90) and DSP::Host::UpdateDebugger (which
only called Host_RefreshDSPDebuggerWindow).
Remove Host_UpdateMainFrame(). The only non-empty call happened in
DolphinNoGUI which called s_update_main_frame_event.Set(), but
DolphinNoGUI never waits on that event.
When 9d9b6d8 changed our target SDK version to Android 16, it made
Android 16 stop calling onBackPressed and stop delivering KEYCODE_BACK
events. Dolphin's code isn't ready for that yet.
Android lets us opt out of this new behavior for now, so let's do so.
But the opt-out will presumably stop working once we start targeting
Android 17, so we're going to have to update Dolphin's code within the
next one or two years to support the replacement API.
We can register a BroadcastReceiver to have Android tell us when a GC
adapter gets connected instead of having a loop where we continuously
call SleepCurrentThread(1000) and poll the current status. When waiting
for a GC adapter to connect, this both reduces power usage and improves
responsiveness.
Note that I made openAdapter get the UsbDevice that's been stored by the
hotplug code instead of having openAdapter find the UsbDevice on its own
like before. This is only because I want to ensure that the UsbDevice
being tracked for disconnection is the same as the UsbDevice actually
being used, in case the user has multiple adapters connected.
When Android sends Dolphin to the background, emulation *must* pause,
otherwise emulation continues running and continues outputting audio to
the user. RetroAchievements mustn't be allowed to override it.
Without this, there was a bug where if you turned the device's screen
off and on again while in the advanced mapping dialog, the input
indicators would stop updating. This is because turning the screen on
again causes devices to refresh, which causes all devices to be
recreated, leaving the AdvancedMappingControlViewHolders stuck
referencing controls belonging to devices that are no longer being
updated.
This makes sure view holders get proper widths when they use
layout_width="match_parent". This becomes quite noticeable for
AdvancedMappingControlAdapter in the next commit, but I'm also
making the change for other adapters while I'm at it.
Google Play is now blocking distribution for Android TV unless we
explicitly set the android.hardware.microphone hardware feature as
android:required="false", because it's inferring
android.hardware.microphone from the android.permission.RECORD_AUDIO we
added for Wii Speak emulation, with android:required defaulting to true.
I was under the belief that setting android:required="false" on
android.permission.RECORD_AUDIO would solve this, but looking closer at
the definition of <uses-permission>, it doesn't actually support
android:required attributes, so that presumably has no effect.
This can reduce audio latency according to
https://developer.android.com/ndk/guides/audio/opensl/opensl-prog-notes#perform.
Previously we were using the hardcoded values of 48000 Hz and 256 frames
per buffer. The sample rate we use with this change is 48000 Hz on all
devices I'm aware of, but the buffer size does vary across devices.
Terminology note: The old code used the term "sample" to refer to what
Android refers to as a "frame". "Frame" is a clearer term to use for
this, so I've changed OpenSLESStream's terminology. One frame consists
of one sample per channel.
If you already have a mapping set in the advanced mapping dialog and
want to change it, the easiest way to do it is to press Clear and then
select the new mapping from the list. But pressing Clear causes the
dialog to close, forcing you to open it again, which is inconvenient.
This commit makes it so the Clear button doesn't close the dialog.
This feature allows overriding the frequency of the Vertical Blank Interrupt. For many games, this means that their gameplay speed will change without affecting audio, which would be useful by itself (e.g. grinding in RPGs).
However, there are games that use delta time for their game logic, which allows them to be played at >60 FPS at the same gameplay speed!
Some games aren't dynamic though, and require a patch to adjust their game speed variable.
Old cruft from when the Android code was loading INI files manually.
We don't have any handling for failing to load settings anymore.
This change also updates related comments to reflect how things actually
work nowadays.
Probably a copy-paste error from layout-ldrtl/list_item_setting.xml.
This error made it so a long setting name could overlap with the
checkbox next to it if Dolphin was running with right-to-left layout.
The incorrect ID was apparently also causing the app:lintVitalRelease
build task to fail. I guess we're not running that build task, because I
only heard of this from someone building Dolphin locally.
There's no guarantee that directory initialization has completed by this
point, so we can't safely use NativeLibrary.
I'm making this change because of a crash being reported in Google Play
Console. The exact way it's crashing is mysterious to me, so I'm not
sure if this commit fixes the crash, but I think this commit is
a reasonable change to make even if it doesn't fix the crash. Backtrace
from Google Play Console:
#00 pc 0x0000000000469074 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (std::__ndk1::pair<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>> const, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>::pair[abi:nn180000]<char const* const&, char const* const&, 0>(char const* const&, char const* const&)) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#01 pc 0x0000000000468e9c /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (std::__ndk1::pair<std::__ndk1::__tree_iterator<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::__tree_node<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, void*>*, long>, bool> std::__ndk1::__tree<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::__map_value_compare<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::less<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, true>, std::__ndk1::allocator<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>>>::__emplace_unique_impl<char const* const&, char const* const&>(char const* const&, char const* const&)) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#02 pc 0x0000000000462f08 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (Common::Log::LogManager::GetLogTypes()) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#03 pc 0x000000000044339c /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (Java_org_dolphinemu_dolphinemu_NativeLibrary_GetLogTypeNames+56) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#04 pc 0x000000000031456c /data/misc/apexdata/com.android.art/dalvik-cache/arm64/boot.oat (art_jni_trampoline+108)
#05 pc 0x0000000000781508 /apex/com.android.art/lib64/libart.so (nterp_helper+152)
#06 pc 0x00000000002d94d4 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/base.apk (org.dolphinemu.dolphinemu.features.settings.ui.SettingsFragmentPresenter.<clinit>+16)
[...]
a1691a4 made it so analytics start events can only be generated when
starting the main activity. However, some users launch Dolphin's
emulation activity from a separate frontend application, bypassing
Dolphin's main activity. This change adjusts the logic so that start
events can be generated if any activity is started after 6 hours of
inactivity. This more closely matches the behavior we had before
a1691a4, while still ensuring duplicate start events aren't generated.
I've also fixed the inconsistent indentation in ActivityTracker.kt.
71f654c added a new platform in the middle of the C++ platform enum
without updating the corresponding Android code, making the Android code
incorrectly treat Wii discs as WAD files, WAD files as DOL/ELF files,
and so on. This commit fixes the problem.
To be able to add the new Triforce entry into the Platform enum without
it leading to the UI getting an additional tab, I'm splitting the enum
into Platform and PlatformTab. Platform now exactly matches the C++
enum (previously it excluded ELFOrDOL), and PlatformTab has the same
content as the old Platform.
dolphin-start event was being generated twice for the normal
end-user case, as can be seen in analytics data for some years.
The problem occured when:
* Android reaped the process hosting the dolphin activity
(e.g. for power/memory saving).
and
* Dolphin activity was in "stopped" state for > 6 hours before
being switched back to.
Under above conditions, both calls to ReportStartToAnalytics
would be performed, as dolphin thought it was being launched anew,
and also thought it had been asleep for > 6 hours.
fixes https://bugs.dolphin-emu.org/issues/13675
This is an Android continuation of bc95c00. We now call
InputDetector::Update immediately after receiving an input event from
Android instead of periodically calling it in a sleep loop. This
improves detection of very short inputs, which are especially likely to
occur for volume buttons on phones (or at least on my phone) if you
don't intentionally keep them held down.
