diff -Nbaur newlib-2.0.0/libgloss/configure newlib-2.0.0-ppc/libgloss/configure --- newlib-2.0.0/libgloss/configure 2012-09-26 21:11:53.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/configure 2013-09-06 22:13:38.000000000 +0100 @@ -1802,6 +1802,7 @@ + if test "${enable_shared}" = "yes" ; then echo "Shared libraries not supported for cross compiling, ignored" fi @@ -2557,6 +2558,8 @@ fi +subdirs="$subdirs libsysbase" + DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" diff -Nbaur newlib-2.0.0/libgloss/configure.in newlib-2.0.0-ppc/libgloss/configure.in --- newlib-2.0.0/libgloss/configure.in 2012-09-26 21:11:54.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/configure.in 2013-09-06 22:13:38.000000000 +0100 @@ -2,6 +2,7 @@ AC_PREREQ(2.59) AC_INIT([libgloss],[LIBGLOSS_VERSION]) AC_CONFIG_SRCDIR([libnosys]) +AC_CONFIG_SRCDIR([libsysbase]) if test "${enable_shared}" = "yes" ; then echo "Shared libraries not supported for cross compiling, ignored" @@ -33,6 +34,9 @@ dnl indicates whether to run configure within the libnosys subdirectory config_libnosys=true +dnl indicates whether to run configure within the libsysbase subdirectory +config_libsysbase=true + case "${target}" in aarch64*-*-*) AC_CONFIG_SUBDIRS(aarch64) @@ -165,6 +169,10 @@ AC_CONFIG_SUBDIRS([libnosys]) fi +if test "${config_libsysbase}" = "true"; then + AC_CONFIG_SUBDIRS([libsysbase]) +fi + LIB_AC_PROG_CC AS=${AS-as} AC_SUBST(AS) diff -Nbaur newlib-2.0.0/libgloss/libsysbase/abort.c newlib-2.0.0-ppc/libgloss/libsysbase/abort.c --- newlib-2.0.0/libgloss/libsysbase/abort.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/abort.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,8 @@ +#include +#include + +void abort(void) { + write (2, "Abort called.\n", sizeof("Abort called.\n")-1); + _exit (1); +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/acconfig.h newlib-2.0.0-ppc/libgloss/libsysbase/acconfig.h --- newlib-2.0.0/libgloss/libsysbase/acconfig.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/acconfig.h 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,29 @@ +/* Name of package. */ +#undef PACKAGE + +/* Version of package. */ +#undef VERSION + +/* Missing syscall names */ +#undef MISSING_SYSCALL_NAMES + +/* Reentrant syscalls */ +#undef REENTRANT_SYSCALLS_PROVIDED + +/* Using ELF format */ +#undef HAVE_ELF + +/* Using GNU LD */ +#undef HAVE_GNU_LD + +/* .previous directive allowed */ +#undef HAVE_ASM_PREVIOUS_DIRECTIVE + +/* .pushsection/.popsection directives allowed */ +#undef HAVE_ASM_POPSECTION_DIRECTIVE + +/* support for section attributes */ +#undef HAVE_SECTION_ATTRIBUTES + +/* symbol prefix */ +#undef __SYMBOL_PREFIX diff -Nbaur newlib-2.0.0/libgloss/libsysbase/aclocal.m4 newlib-2.0.0-ppc/libgloss/libsysbase/aclocal.m4 --- newlib-2.0.0/libgloss/libsysbase/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/aclocal.m4 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,344 @@ +# generated automatically by aclocal 1.9.5 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 7 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH]) +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 3 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +m4_include([../acinclude.m4]) diff -Nbaur newlib-2.0.0/libgloss/libsysbase/build_argv.c newlib-2.0.0-ppc/libgloss/libsysbase/build_argv.c --- newlib-2.0.0/libgloss/libsysbase/build_argv.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/build_argv.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,31 @@ +struct __argv { + int argvMagic; + char *commandLine; + int length; + int argc; + char **argv; + char **endARGV; +}; + + +void build_argv (struct __argv* argstruct ) { + + char *data = argstruct->commandLine; + int len = argstruct->length; + + char** argv = (char**)(((int)data + len + sizeof(char **)) & ~(sizeof(char **)-1)); + char* end = data + len - 1; + int argCount = 0; + + do { + argv[argCount++] = data; // Add next arg to argv list + while (*(data) && data < end) data++; // Move to next NULL delimiter + data++; // Move to one after the NULL delimiter + } while (data < end); + + *end = '\0'; // Force NULL terminator for last arg + + argstruct->argv = argv; + argstruct->argc = argCount; + argstruct->endARGV = &argv[argCount]; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/chdir.c newlib-2.0.0-ppc/libgloss/libsysbase/chdir.c --- newlib-2.0.0/libgloss/libsysbase/chdir.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/chdir.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,176 @@ +#include +#include +#include +#include +#include + +/* CWD always start with "/" */ +static char _current_working_directory [MAXPATHLEN] = "/"; + +#define DIRECTORY_SEPARATOR_CHAR '/' +const char DIRECTORY_SEPARATOR[] = "/"; +const char DIRECTORY_THIS[] = "."; +const char DIRECTORY_PARENT[] = ".."; + +int _concatenate_path (struct _reent *r, char *path, const char *extra, int maxLength) { + char *pathEnd; + int pathLength; + const char *extraEnd; + int extraSize; + + pathLength = strnlen (path, maxLength); + + /* assumes path ends in a directory separator */ + if (pathLength >= maxLength) { + r->_errno = ENAMETOOLONG; + return -1; + } + pathEnd = path + pathLength; + if (pathEnd[-1] != DIRECTORY_SEPARATOR_CHAR) { + pathEnd[0] = DIRECTORY_SEPARATOR_CHAR; + pathEnd += 1; + } + + extraEnd = extra; + + /* If the extra bit starts with a slash, start at root */ + if (extra[0] == DIRECTORY_SEPARATOR_CHAR) { + pathEnd = strchr (path, DIRECTORY_SEPARATOR_CHAR) + 1; + pathEnd[0] = '\0'; + } + do { + /* Advance past any separators in extra */ + while (extra[0] == DIRECTORY_SEPARATOR_CHAR) { + extra += 1; + } + + /* Grab the next directory name from extra */ + extraEnd = strchr (extra, DIRECTORY_SEPARATOR_CHAR); + if (extraEnd == NULL) { + extraEnd = strrchr (extra, '\0'); + } else { + extraEnd += 1; + } + + extraSize = (extraEnd - extra); + if (extraSize == 0) { + break; + } + + if ((strncmp (extra, DIRECTORY_THIS, sizeof(DIRECTORY_THIS) - 1) == 0) + && ((extra[sizeof(DIRECTORY_THIS)-1] == DIRECTORY_SEPARATOR_CHAR) + ||(extra[sizeof(DIRECTORY_THIS)-1] == '\0'))) + { + /* Don't copy anything */ + } else if ((strncmp (extra, DIRECTORY_PARENT, sizeof(DIRECTORY_PARENT) - 1) == 0) + && ((extra[sizeof(DIRECTORY_PARENT)-1] == DIRECTORY_SEPARATOR_CHAR) + ||(extra[sizeof(DIRECTORY_PARENT)-1] == '\0'))) + { + /* Go up one level of in the path */ + if (pathEnd[-1] == DIRECTORY_SEPARATOR_CHAR) { + // Remove trailing separator + pathEnd[-1] = '\0'; + } + pathEnd = strrchr (path, DIRECTORY_SEPARATOR_CHAR); + if (pathEnd == NULL) { + /* Can't go up any higher, return false */ + r->_errno = ENOENT; + return -1; + } + pathLength = pathEnd - path; + pathEnd += 1; + } else { + pathLength += extraSize; + if (pathLength >= maxLength) { + r->_errno = ENAMETOOLONG; + return -1; + } + /* Copy the next part over */ + strncpy (pathEnd, extra, extraSize); + pathEnd += extraSize; + } + pathEnd[0] = '\0'; + extra += extraSize; + } while (extraSize != 0); + + if (pathEnd[-1] != DIRECTORY_SEPARATOR_CHAR) { + pathEnd[0] = DIRECTORY_SEPARATOR_CHAR; + pathEnd[1] = 0; + pathEnd += 1; + } + + return 0; +} + +int chdir (const char *path) { + struct _reent *r = _REENT; + + int dev; + const char *pathPosition; + char temp_cwd [MAXPATHLEN]; + + /* Make sure the path is short enough */ + if (strnlen (path, MAXPATHLEN + 1) >= MAXPATHLEN) { + r->_errno = ENAMETOOLONG; + return -1; + } + + if (strchr (path, ':') != NULL) { + strncpy (temp_cwd, path, MAXPATHLEN); + /* Move path past device name */ + path = strchr (path, ':') + 1; + } else { + strncpy (temp_cwd, _current_working_directory, MAXPATHLEN); + } + + pathPosition = strchr (temp_cwd , ':') + 1; + + /* Make sure the path starts in the root directory */ + if (pathPosition[0] != DIRECTORY_SEPARATOR_CHAR) { + r->_errno = ENOENT; + return -1; + } + + /* Concatenate the path to the CWD */ + if (_concatenate_path (r, temp_cwd, path, MAXPATHLEN) == -1) { + return -1; + } + + /* Get device from path name */ + dev = FindDevice(temp_cwd); + + if ((dev < 0) || (devoptab_list[dev]->chdir_r == NULL)) { + r->_errno = ENODEV; + return -1; + } + + /* Try changing directories on the device */ + if (devoptab_list[dev]->chdir_r (r, temp_cwd) == -1) { + return -1; + } + + /* Since it worked, set the new CWD and default device */ + setDefaultDevice(dev); + strncpy (_current_working_directory, temp_cwd, MAXPATHLEN); + + return 0; +} + +char *getcwd(char *buf, size_t size) { + + struct _reent *r = _REENT; + + if (size == 0) { + r->_errno = EINVAL; + return NULL; + } + + if ( size < (strnlen (_current_working_directory, MAXPATHLEN) + 1)) { + r->_errno = ERANGE; + return NULL; + } + + strncpy (buf, _current_working_directory, size); + + return buf; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/chmod.c newlib-2.0.0-ppc/libgloss/libsysbase/chmod.c --- newlib-2.0.0/libgloss/libsysbase/chmod.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/chmod.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,25 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include +#include + +int chmod(const char *path, mode_t mode) { + int ret,dev; + struct _reent *r = _REENT; + + /* Get device from path name */ + dev = FindDevice(path); + + if ((dev < 0) || (devoptab_list[dev]->chmod_r == NULL)) { + r->_errno = ENODEV; + ret = -1; + } else { + ret = devoptab_list[dev]->chmod_r(r,path,mode); + } + + return ret; +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/close.c newlib-2.0.0-ppc/libgloss/libsysbase/close.c --- newlib-2.0.0/libgloss/libsysbase/close.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/close.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,42 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include + +#include "handle_manager.h" + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +int +_DEFUN(_close_r,(ptr,fileDesc), + struct _reent *ptr _AND + int fileDesc) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int _DEFUN(_close,(fileDesc), + int fileDesc) { +//--------------------------------------------------------------------------------- + struct _reent *ptr = _REENT; +#endif + int ret = -1; + unsigned int dev = 0; + unsigned int fd = -1; + + if(fileDesc!=-1) { + + __handle *handle = __get_handle(fileDesc); + + if ( handle != NULL) { + dev = handle->device; + fd = (unsigned int)handle->fileStruct; + + if(devoptab_list[dev]->close_r) + ret = devoptab_list[dev]->close_r(ptr,fd); + + __release_handle(fileDesc); + } + } + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/config.h.in newlib-2.0.0-ppc/libgloss/libsysbase/config.h.in --- newlib-2.0.0/libgloss/libsysbase/config.h.in 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/config.h.in 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,25 @@ +/* config.h.in. Generated automatically from configure.in by autoheader. */ + +/* Missing syscall names */ +#undef MISSING_SYSCALL_NAMES + +/* Reentrant syscalls */ +#undef REENTRANT_SYSCALLS_PROVIDED + +/* Using ELF format */ +#undef HAVE_ELF + +/* Using GNU LD */ +#undef HAVE_GNU_LD + +/* .previous directive allowed */ +#undef HAVE_ASM_PREVIOUS_DIRECTIVE + +/* .pushsection/.popsection directives allowed */ +#undef HAVE_ASM_POPSECTION_DIRECTIVE + +/* support for section attributes */ +#undef HAVE_SECTION_ATTRIBUTES + +/* symbol prefix */ +#undef __SYMBOL_PREFIX diff -Nbaur newlib-2.0.0/libgloss/libsysbase/configure newlib-2.0.0-ppc/libgloss/libsysbase/configure --- newlib-2.0.0/libgloss/libsysbase/configure 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/configure 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,3549 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="close.c" +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CC am__leading_dot DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS AR LD RANLIB ac_ct_RANLIB CCAS CCASFLAGS host_makefile_frag_path LIBOBJS LTLIBOBJS' +ac_subst_files='host_makefile_frag' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CCAS_set=${CCAS+set} +ac_env_CCAS_value=$CCAS +ac_cv_env_CCAS_set=${CCAS+set} +ac_cv_env_CCAS_value=$CCAS +ac_env_CCASFLAGS_set=${CCASFLAGS+set} +ac_env_CCASFLAGS_value=$CCASFLAGS +ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set} +ac_cv_env_CCASFLAGS_value=$CCASFLAGS + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + +Some influential environment variables: + CCAS assembler compiler command (defaults to CC) + CCASFLAGS assembler compiler flags (defaults to CFLAGS) + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + ac_config_headers="$ac_config_headers config.h" + + +if test "${enable_shared}" = "yes" ; then + echo "Shared libraries not supported for cross compiling, ignored" +fi + +if test "$srcdir" = "." ; then + if test "${with_target_subdir}" != "." ; then + libgloss_topdir="${srcdir}/${with_multisrctop}../../.." + else + libgloss_topdir="${srcdir}/${with_multisrctop}../.." + fi +else + libgloss_topdir="${srcdir}/../.." +fi +ac_aux_dir= +for ac_dir in $libgloss_topdir $srcdir/$libgloss_topdir; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $libgloss_topdir $srcdir/$libgloss_topdir" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $libgloss_topdir $srcdir/$libgloss_topdir" >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking target system type" >&5 +echo $ECHO_N "checking target system type... $ECHO_C" >&6 +if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_target_alias=$target_alias +test "x$ac_cv_target_alias" = "x" && + ac_cv_target_alias=$ac_cv_host_alias +ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +echo "${ECHO_T}$ac_cv_target" >&6 +target=$ac_cv_target +target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- +test "$program_prefix" != NONE && + program_transform_name="s,^,$program_prefix,;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$,$program_suffix,;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm conftest.sed + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi +fi +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_GNU_LD 1 +_ACEOF + +case "${target}" in + *-*-cygwin*) + ;; + a29k-amd-udi) + ;; + arc-*-*) + ;; + arm-*-pe) + ;; + arm-*-*) + ;; + strongarm-*-*) + ;; + cris-*-* | crisv32-*-*) + ;; + d10v*) + ;; + h8300*-*-*) + ;; + h8500-*-*) + ;; + i345686-*-sco*) + ;; + m32r-*-*) + ;; + mn10?00-*-*) + ;; + powerpc-*-eabi) + cat >>confdefs.h <<\_ACEOF +#define REENTRANT_SYSCALLS_PROVIDED 1 +_ACEOF + + ;; + powerpcle-*-pe) + ;; + sh*-*-*) + ;; + sparc-sun-sunos*) + ;; + sparc64-*-*) + ;; + thumb-*-pe) + ;; + thumb-*-*) + ;; + v850-*-*) + ;; + v850e-*-*) + ;; + v850ea-*-*) + ;; + w65-*-*) + ;; + xstormy16-*-*) + ;; + z8k-*-*) + ;; + *) + cat >>confdefs.h <<\_ACEOF +#define MISSING_SYSCALL_NAMES 1 +_ACEOF + + ;; +esac + +case "${target}" in + *-*-elf) + cat >>confdefs.h <<\_ACEOF +#define HAVE_ELF 1 +_ACEOF + + + echo "$as_me:$LINENO: checking for .previous assembler directive" >&5 +echo $ECHO_N "checking for .previous assembler directive... $ECHO_C" >&6 +if test "${libc_cv_asm_previous_directive+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + libc_cv_asm_previous_directive=no + cat > conftest.s <&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + libc_cv_asm_previous_directive=yes + fi + rm -f conftest* +fi +echo "$as_me:$LINENO: result: $libc_cv_asm_previous_directive" >&5 +echo "${ECHO_T}$libc_cv_asm_previous_directive" >&6 + + if test "x${libc_cv_asm_previous_directive}" = "xyes"; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_ASM_PREVIOUS_DIRECTIVE 1 +_ACEOF + + fi + + echo "$as_me:$LINENO: checking for .popsection assembler directive" >&5 +echo $ECHO_N "checking for .popsection assembler directive... $ECHO_C" >&6 +if test "${libc_cv_asm_popsection_directive+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + libc_cv_asm_popsection_directive=no + cat > conftest.s <&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + libc_cv_asm_popsection_directive=yes + fi + rm -f conftest* +fi +echo "$as_me:$LINENO: result: $libc_cv_asm_popsection_directive" >&5 +echo "${ECHO_T}$libc_cv_asm_popsection_directive" >&6 + + if test "x${libc_cv_asm_popsection_directive}" = "xyes"; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_ASM_POPSECTION_DIRECTIVE 1 +_ACEOF + + fi + + echo "$as_me:$LINENO: checking for section attributes" >&5 +echo $ECHO_N "checking for section attributes... $ECHO_C" >&6 +if test "${libc_cv_section_attributes+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + libc_cv_section_attributes=no + cat > conftest.c <&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + libc_cv_section_attributes=yes + fi + rm -f conftest* +fi +echo "$as_me:$LINENO: result: $libc_cv_section_attributes" >&5 +echo "${ECHO_T}$libc_cv_section_attributes" >&6 + if test "x${libc_cv_section_attributes}" = "xyes"; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_SECTION_ATTRIBUTES 1 +_ACEOF + + fi + ;; +esac + +echo "$as_me:$LINENO: checking for symbol prefix" >&5 +echo $ECHO_N "checking for symbol prefix... $ECHO_C" >&6 +if test "${libc_symbol_prefix+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat > conftest.c <<\EOF +foo () { } +EOF +libc_symbol_prefix=none +if { ac_try='${CC-cc} -S conftest.c -o - | fgrep "\$foo" > /dev/null' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; +then + libc_symbol_prefix='$' +else + if { ac_try='${CC-cc} -S conftest.c -o - | fgrep "_foo" > /dev/null' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; + then + libc_symbol_prefix=_ + fi +fi +rm -f conftest* +fi +echo "$as_me:$LINENO: result: $libc_symbol_prefix" >&5 +echo "${ECHO_T}$libc_symbol_prefix" >&6 +if test $libc_symbol_prefix != none; then + cat >>confdefs.h <<_ACEOF +#define __SYMBOL_PREFIX "$libc_symbol_prefix" +_ACEOF + +else + cat >>confdefs.h <<\_ACEOF +#define __SYMBOL_PREFIX "" +_ACEOF + +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +DEPDIR="${am__leading_dot}deps" + + ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6 +rm -f confinc confmf + +# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval="$enable_dependency_tracking" + +fi; +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + + +if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + +depcc="$CC" am_compiler_list= + +echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + + +if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 +echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +fi + +echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 +echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat > conftest.c <&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } | egrep yes >/dev/null 2>&1; then + ac_cv_c_compiler_gnu=yes +else + ac_cv_c_compiler_gnu=no +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 + +if test $ac_cv_c_compiler_gnu = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + +AS=${AS-as} + +AR=${AR-ar} + +LD=${LD-ld} + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +# By default we simply use the C compiler to build assembly code. + +test "${CCAS+set}" = set || CCAS=$CC +test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS + + + + +host_makefile_frag=${srcdir}/../config/default.mh + +host_makefile_frag_path=$host_makefile_frag + + + + ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +# +# INIT-COMMANDS section. +# + +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +srcdir=${srcdir} +target=${target} +with_multisubdir=${with_multisubdir} +ac_configure_args="${ac_configure_args} --enable-multilib" +CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +libgloss_topdir=${libgloss_topdir} + + +_ACEOF + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@target@,$target,;t t +s,@target_cpu@,$target_cpu,;t t +s,@target_vendor@,$target_vendor,;t t +s,@target_os@,$target_os,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@CC@,$CC,;t t +s,@am__leading_dot@,$am__leading_dot,;t t +s,@DEPDIR@,$DEPDIR,;t t +s,@am__include@,$am__include,;t t +s,@am__quote@,$am__quote,;t t +s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t +s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t +s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t +s,@CCDEPMODE@,$CCDEPMODE,;t t +s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t +s,@AS@,$AS,;t t +s,@AR@,$AR,;t t +s,@LD@,$LD,;t t +s,@RANLIB@,$RANLIB,;t t +s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@CCAS@,$CCAS,;t t +s,@CCASFLAGS@,$CCASFLAGS,;t t +s,@host_makefile_frag_path@,$host_makefile_frag_path,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +/@host_makefile_frag@/r $host_makefile_frag +s,@host_makefile_frag@,,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + esac + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + + # Run the commands associated with the file. + case $ac_file in + Makefile ) ac_file=Makefile . ${libgloss_topdir}/config-ml.in ;; + esac +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_HEADER section. +# + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='[ ].*$,\1#\2' +ac_dC=' ' +ac_dD=',;t' +# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='$,\1#\2define\3' +ac_uC=' ' +ac_uD=',;t' + +for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + # Do quote $f, to prevent DOS paths from being IFS'd. + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + # Remove the trailing spaces. + sed 's/[ ]*$//' $ac_file_inputs >$tmp/in + +_ACEOF + +# Transform confdefs.h into two sed scripts, `conftest.defines' and +# `conftest.undefs', that substitutes the proper values into +# config.h.in to produce config.h. The first handles `#define' +# templates, and the second `#undef' templates. +# And first: Protect against being on the right side of a sed subst in +# config.status. Protect against being in an unquoted here document +# in config.status. +rm -f conftest.defines conftest.undefs +# Using a here document instead of a string reduces the quoting nightmare. +# Putting comments in sed scripts is not portable. +# +# `end' is used to avoid that the second main sed command (meant for +# 0-ary CPP macros) applies to n-ary macro definitions. +# See the Autoconf documentation for `clear'. +cat >confdef2sed.sed <<\_ACEOF +s/[\\&,]/\\&/g +s,[\\$`],\\&,g +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +t end +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +: end +_ACEOF +# If some macros were called several times there might be several times +# the same #defines, which is useless. Nevertheless, we may not want to +# sort them, since we want the *last* AC-DEFINE to be honored. +uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +rm -f confdef2sed.sed + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >>conftest.undefs <<\_ACEOF +s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +_ACEOF + +# Break up conftest.defines because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +echo ' :' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.defines >/dev/null +do + # Write a limited-size here document to $tmp/defines.sed. + echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#define' lines. + echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/defines.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail + rm -f conftest.defines + mv conftest.tail conftest.defines +done +rm -f conftest.defines +echo ' fi # grep' >>$CONFIG_STATUS +echo >>$CONFIG_STATUS + +# Break up conftest.undefs because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.undefs >/dev/null +do + # Write a limited-size here document to $tmp/undefs.sed. + echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#undef' + echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/undefs.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail + rm -f conftest.undefs + mv conftest.tail conftest.undefs +done +rm -f conftest.undefs + +cat >>$CONFIG_STATUS <<\_ACEOF + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + echo "/* Generated by configure. */" >$tmp/config.h + else + echo "/* $ac_file. Generated by configure. */" >$tmp/config.h + fi + cat $tmp/in >>$tmp/config.h + rm -f $tmp/in + if test x"$ac_file" != x-; then + if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +echo "$as_me: $ac_file is unchanged" >&6;} + else + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + rm -f $ac_file + mv $tmp/config.h $ac_file + fi + else + cat $tmp/config.h + rm -f $tmp/config.h + fi +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_COMMANDS section. +# +for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue + ac_dest=`echo "$ac_file" | sed 's,:.*,,'` + ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_dir=`(dirname "$ac_dest") 2>/dev/null || +$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_dest" : 'X\(//\)[^/]' \| \ + X"$ac_dest" : 'X\(//\)$' \| \ + X"$ac_dest" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_dest" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +echo "$as_me: executing $ac_dest commands" >&6;} + case $ac_dest in + depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`(dirname "$mf") 2>/dev/null || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`(dirname "$file") 2>/dev/null || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p $dirpart/$fdir + else + as_dir=$dirpart/$fdir + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 +echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} + { (exit 1); exit 1; }; }; } + + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done + ;; + esac +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + + + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/configure.in newlib-2.0.0-ppc/libgloss/libsysbase/configure.in --- newlib-2.0.0/libgloss/libsysbase/configure.in 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/configure.in 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,207 @@ +# Copyright (c) 1995, 1996 Cygnus Support +# +# The authors hereby grant permission to use, copy, modify, distribute, +# and license this software and its documentation for any purpose, provided +# that existing copyright notices are retained in all copies and that this +# notice is included verbatim in any distributions. No written agreement, +# license, or royalty fee is required for any of the authorized uses. +# Modifications to this software may be copyrighted by their authors +# and need not follow the licensing terms described here, provided that +# the new terms are clearly indicated on the first page of each file where +# they apply. +# +# Process this file with autoconf to produce a configure script. +# +AC_PREREQ(2.59) +AC_INIT(close.c) +AC_CONFIG_HEADER(config.h) + +if test "${enable_shared}" = "yes" ; then + echo "Shared libraries not supported for cross compiling, ignored" +fi + +if test "$srcdir" = "." ; then + if test "${with_target_subdir}" != "." ; then + libgloss_topdir="${srcdir}/${with_multisrctop}../../.." + else + libgloss_topdir="${srcdir}/${with_multisrctop}../.." + fi +else + libgloss_topdir="${srcdir}/../.." +fi +AC_CONFIG_AUX_DIR($libgloss_topdir) + +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM + +AC_PROG_INSTALL + +AC_DEFINE(HAVE_GNU_LD) +dnl Make sure syscall names match those being used by newlib +case "${target}" in + *-*-cygwin*) + ;; + a29k-amd-udi) + ;; + arc-*-*) + ;; + arm-*-pe) + ;; + arm-*-*) + ;; + strongarm-*-*) + ;; + cris-*-* | crisv32-*-*) + ;; + d10v*) + ;; + h8300*-*-*) + ;; + h8500-*-*) + ;; + i[3456]86-*-sco*) + ;; + m32r-*-*) + ;; + mn10?00-*-*) + ;; + powerpc-*-eabi) + AC_DEFINE(REENTRANT_SYSCALLS_PROVIDED) + ;; + powerpcle-*-pe) + ;; + sh*-*-*) + ;; + sparc-sun-sunos*) + ;; + sparc64-*-*) + ;; + thumb-*-pe) + ;; + thumb-*-*) + ;; + v850-*-*) + ;; + v850e-*-*) + ;; + v850ea-*-*) + ;; + w65-*-*) + ;; + xstormy16-*-*) + ;; + z8k-*-*) + ;; + *) + AC_DEFINE(MISSING_SYSCALL_NAMES) + ;; +esac + +dnl Make sure we know if elf format used +case "${target}" in + *-*-elf) + AC_DEFINE(HAVE_ELF) + + AC_CACHE_CHECK([for .previous assembler directive], + libc_cv_asm_previous_directive, [dnl + libc_cv_asm_previous_directive=no + cat > conftest.s <&AC_FD_CC); then + libc_cv_asm_previous_directive=yes + fi + rm -f conftest*]) + + if test "x${libc_cv_asm_previous_directive}" = "xyes"; then + AC_DEFINE(HAVE_ASM_PREVIOUS_DIRECTIVE) + fi + + AC_CACHE_CHECK([for .popsection assembler directive], + libc_cv_asm_popsection_directive, [dnl + libc_cv_asm_popsection_directive=no + cat > conftest.s <&AC_FD_CC); then + libc_cv_asm_popsection_directive=yes + fi + rm -f conftest*]) + + if test "x${libc_cv_asm_popsection_directive}" = "xyes"; then + AC_DEFINE(HAVE_ASM_POPSECTION_DIRECTIVE) + fi + + AC_CACHE_CHECK([for section attributes], + libc_cv_section_attributes, [dnl + libc_cv_section_attributes=no + cat > conftest.c <&AC_FD_CC); then + libc_cv_section_attributes=yes + fi + rm -f conftest*]) + if test "x${libc_cv_section_attributes}" = "xyes"; then + AC_DEFINE(HAVE_SECTION_ATTRIBUTES) + fi + ;; +esac + +AC_CACHE_CHECK([for symbol prefix], libc_symbol_prefix, [dnl +cat > conftest.c <<\EOF +foo () { } +EOF +dnl +libc_symbol_prefix=none +if AC_TRY_COMMAND([${CC-cc} -S conftest.c -o - | fgrep "\$foo" > /dev/null]); +then + libc_symbol_prefix='$' +else + if AC_TRY_COMMAND([${CC-cc} -S conftest.c -o - | fgrep "_foo" > /dev/null]); + then + libc_symbol_prefix=_ + fi +fi +rm -f conftest* ]) +if test $libc_symbol_prefix != none; then + AC_DEFINE_UNQUOTED(__SYMBOL_PREFIX, "$libc_symbol_prefix") +else + AC_DEFINE(__SYMBOL_PREFIX, "") +fi + +LIB_AC_PROG_CC +AS=${AS-as} +AC_SUBST(AS) +AR=${AR-ar} +AC_SUBST(AR) +LD=${LD-ld} +AC_SUBST(LD) +AC_PROG_RANLIB +LIB_AM_PROG_AS + +host_makefile_frag=${srcdir}/../config/default.mh + +dnl We have to assign the same value to other variables because autoconf +dnl doesn't provide a mechanism to substitute a replacement keyword with +dnl arbitrary data or pathnames. +dnl +host_makefile_frag_path=$host_makefile_frag +AC_SUBST(host_makefile_frag_path) +AC_SUBST_FILE(host_makefile_frag) + +AC_CONFIG_FILES(Makefile, +ac_file=Makefile . ${libgloss_topdir}/config-ml.in, +srcdir=${srcdir} +target=${target} +with_multisubdir=${with_multisubdir} +ac_configure_args="${ac_configure_args} --enable-multilib" +CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +libgloss_topdir=${libgloss_topdir} +) +AC_OUTPUT + + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/dirent.c newlib-2.0.0-ppc/libgloss/libsysbase/dirent.c --- newlib-2.0.0/libgloss/libsysbase/dirent.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/dirent.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,200 @@ +#include +#include +#include +#include +#include +#include + +static DIR_ITER * __diropen (const char *path) { + struct _reent *r = _REENT; + DIR_ITER *handle = NULL; + DIR_ITER *dir = NULL; + int dev; + + dev = FindDevice(path); + + if(dev!=-1 && devoptab_list[dev]->diropen_r) { + + handle = (DIR_ITER *)malloc( sizeof(DIR_ITER) + devoptab_list[dev]->dirStateSize ); + + if ( NULL != handle ) { + handle->device = dev; + handle->dirStruct = ((void *)handle) + sizeof(DIR_ITER); + + dir = devoptab_list[dev]->diropen_r(r, handle, path); + + if ( dir == NULL ) { + free (handle); + handle = NULL; + } + } else { + r->_errno = ENOSR; + handle = NULL; + } + } else { + r->_errno = ENOSYS; + } + + return handle; +} + +static int __dirreset (DIR_ITER *dirState) { + struct _reent *r = _REENT; + int ret = -1; + int dev = 0; + + if (dirState != NULL) { + dev = dirState->device; + + if(devoptab_list[dev]->dirreset_r) { + ret = devoptab_list[dev]->dirreset_r(r, dirState); + } else { + r->_errno = ENOSYS; + } + } + return ret; +} + +static int __dirnext (DIR_ITER *dirState, char *filename, struct stat *filestat) { + struct _reent *r = _REENT; + int ret = -1; + int dev = 0; + + if (dirState != NULL) { + dev = dirState->device; + + if(devoptab_list[dev]->dirnext_r) { + ret = devoptab_list[dev]->dirnext_r(r, dirState, filename, filestat); + } else { + r->_errno = ENOSYS; + } + } + return ret; +} + +static int __dirclose (DIR_ITER *dirState) { + struct _reent *r = _REENT; + int ret = -1; + int dev = 0; + + if (dirState != NULL) { + dev = dirState->device; + + if (devoptab_list[dev]->dirclose_r) { + ret = devoptab_list[dev]->dirclose_r (r, dirState); + } else { + r->_errno = ENOSYS; + } + + free (dirState); + } + return ret; +} + +DIR* opendir (const char *dirname) { + DIR* dirp = malloc (sizeof(DIR)); + if (!dirp) { + errno = ENOMEM; + return NULL; + } + + dirp->dirData = __diropen (dirname); + if (!dirp->dirData) { + free (dirp); + return NULL; + } + + dirp->position = 0; // 0th position means no file name has been returned yet + dirp->fileData.d_ino = -1; + dirp->fileData.d_name[0] = '\0'; + + return dirp; +} + +int closedir (DIR *dirp) { + int res; + + if (!dirp) { + errno = EBADF; + return -1; + } + + res = __dirclose (dirp->dirData); + free (dirp); + return res; +} + +struct dirent* readdir (DIR *dirp) { + struct stat st; + char filename[MAXPATHLEN]; + int res; + int olderrno = errno; + + if (!dirp) { + errno = EBADF; + return NULL; + } + + res = __dirnext (dirp->dirData, filename, &st); + + if (res < 0) { + if (errno == ENOENT) { + // errno == ENONENT set by dirnext means it's end of directory + // But readdir should not touch errno in case of dir end + errno = olderrno; + } + return NULL; + } + + // We've moved forward in the directory + dirp->position += 1; + + if (strnlen(filename, MAXPATHLEN) >= sizeof(dirp->fileData.d_name)) { + errno = EOVERFLOW; + return NULL; + } + + strncpy (dirp->fileData.d_name, filename, sizeof(dirp->fileData.d_name)); + dirp->fileData.d_ino = st.st_ino; + dirp->fileData.d_type = S_ISDIR(st.st_mode)?DT_DIR:DT_REG; + return &(dirp->fileData); +} + +void rewinddir (DIR *dirp) { + if (!dirp) { + return; + } + + __dirreset (dirp->dirData); + dirp->position = 0; +} + +void seekdir(DIR *dirp, long int loc) { + char filename[MAXPATHLEN]; + + if (!dirp || loc < 0) { + return; + } + + if (dirp->position > loc) { + // The entry we want is before the one we have, + // so we have to start again from the begining + __dirreset (dirp->dirData); + dirp->position = 0; + } + + // Keep reading entries until we reach the one we want + while ((dirp->position < loc) && + (__dirnext (dirp->dirData, filename, NULL) >= 0)) + { + dirp->position += 1; + } +} + +long int telldir(DIR *dirp) { + if (!dirp) { + return -1; + } + + return dirp->position; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/environ.c newlib-2.0.0-ppc/libgloss/libsysbase/environ.c --- newlib-2.0.0/libgloss/libsysbase/environ.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/environ.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,6 @@ +/* + * Version of environ for no OS. + */ + +char *__env[1] = { 0 }; +char **environ = __env; diff -Nbaur newlib-2.0.0/libgloss/libsysbase/execve.c newlib-2.0.0-ppc/libgloss/libsysbase/execve.c --- newlib-2.0.0/libgloss/libsysbase/execve.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/execve.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,31 @@ +/* + * Stub version of execve. + */ + +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +_DEFUN (_execve_r, (r, name, argv, env), + struct _reent * r _AND + char *name _AND + char **argv _AND + char **env) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int +_DEFUN (_execve, (name, argv, env), + char *name _AND + char **argv _AND + char **env) { +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +#endif + r->_errno = ENOSYS; + return -1; +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/_exit.c newlib-2.0.0-ppc/libgloss/libsysbase/_exit.c --- newlib-2.0.0/libgloss/libsysbase/_exit.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/_exit.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,19 @@ +/* Stub version of _exit. */ + +#include +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include + +_VOID +_DEFUN (_exit, (rc), + int rc) +{ + + if ( __syscalls.exit ) { + __syscalls.exit(rc); + } + + while(1); +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/fchmod.c newlib-2.0.0-ppc/libgloss/libsysbase/fchmod.c --- newlib-2.0.0/libgloss/libsysbase/fchmod.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/fchmod.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,30 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include +#include + +#include "handle_manager.h" + +int fchmod(int fd, mode_t mode) { + int ret = -1, dev; + struct _reent *r = _REENT; + + if(fd!=-1) { + + __handle *handle = __get_handle(fd); + + if ( handle != NULL) { + + dev = handle->device; + fd = (unsigned int)handle->fileStruct; + + if(devoptab_list[dev]->fchmod_r) + ret = devoptab_list[dev]->fchmod_r(r,fd,mode); + + } + } + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/flock.c newlib-2.0.0-ppc/libgloss/libsysbase/flock.c --- newlib-2.0.0/libgloss/libsysbase/flock.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/flock.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,21 @@ +#include +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include +#ifndef REENTRANT_SYSCALLS_PROVIDED +#include +#endif +#include +#include + +void __flockfile(FILE *fp) +{ + __lock_acquire_recursive(*(_LOCK_RECURSIVE_T*)&fp->_lock); +} + +void __funlockfile(FILE *fp) +{ + __lock_release_recursive(*(_LOCK_RECURSIVE_T*)&fp->_lock); +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/fork.c newlib-2.0.0-ppc/libgloss/libsysbase/fork.c --- newlib-2.0.0/libgloss/libsysbase/fork.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/fork.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,25 @@ +/* + * Stub version of fork. + */ + +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +int +_DEFUN(_fork_r,(r), + struct _reent * r) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int +_DEFUN (_fork, (), + _NOARGS) { +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +#endif + r->_errno = ENOSYS; + return -1; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/fstat.c newlib-2.0.0-ppc/libgloss/libsysbase/fstat.c --- newlib-2.0.0/libgloss/libsysbase/fstat.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/fstat.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,50 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include +#include + +#include "handle_manager.h" + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +int _DEFUN (_fstat_r,(r,fileDesc, st), + struct _reent * r _AND + int fileDesc _AND + struct stat *st) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int _DEFUN (_fstat,(fileDesc, st), + int fileDesc _AND + struct stat *st) { +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +#endif + int ret = -1; + unsigned int dev = 0; + unsigned int fd = -1; + + __handle * handle = NULL; + + if(fileDesc!=-1) { + if ( fileDesc < 3) { + dev = fileDesc; + } else { + handle = __get_handle(fileDesc); + + if ( NULL == handle ) return ret; + + dev = handle->device; + fd = (int)handle->fileStruct; + } + if(devoptab_list[dev]->fstat_r) { + ret = devoptab_list[dev]->fstat_r(r,fd,st); + } else { + r->_errno = ENOSYS; + } + } + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/fsync.c newlib-2.0.0-ppc/libgloss/libsysbase/fsync.c --- newlib-2.0.0/libgloss/libsysbase/fsync.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/fsync.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,36 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include + +#include "handle_manager.h" + +int _DEFUN (fsync,(fileDesc), + int fileDesc ) { + int ret = -1; + unsigned int dev = 0; + unsigned int fd = -1; + + __handle * handle; + + if ( fileDesc < 3) { + errno = EINVAL; + } else { + handle = __get_handle(fileDesc); + + if ( NULL == handle ) { + errno = EINVAL; + return ret; + } + + dev = handle->device; + fd = (int)handle->fileStruct; + + if(devoptab_list[dev]->fsync_r) + ret = devoptab_list[dev]->fsync_r( _REENT, fd); + } + + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/ftruncate.c newlib-2.0.0-ppc/libgloss/libsysbase/ftruncate.c --- newlib-2.0.0/libgloss/libsysbase/ftruncate.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/ftruncate.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,37 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include + +#include "handle_manager.h" + +int _DEFUN (ftruncate,(fileDesc, len), + int fileDesc _AND + off_t len) { + int ret = -1; + unsigned int dev = 0; + unsigned int fd = -1; + + __handle * handle; + + if ( fileDesc < 3) { + errno = EINVAL; + } else { + handle = __get_handle(fileDesc); + + if ( NULL == handle ) { + errno = EINVAL; + return ret; + } + + dev = handle->device; + fd = (int)handle->fileStruct; + + if(devoptab_list[dev]->ftruncate_r) + ret = devoptab_list[dev]->ftruncate_r( _REENT, fd, len); + } + + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/getpid.c newlib-2.0.0-ppc/libgloss/libsysbase/getpid.c --- newlib-2.0.0/libgloss/libsysbase/getpid.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/getpid.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,21 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +int _DEFUN( _getpid_r,(ptr), + struct _reent *ptr) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int _DEFUN (_getpid, (), + _NOARGS) { +//--------------------------------------------------------------------------------- + struct _reent *ptr = _REENT; +#endif + ptr->_errno = ENOSYS; + return -1; +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/gettod.c newlib-2.0.0-ppc/libgloss/libsysbase/gettod.c --- newlib-2.0.0/libgloss/libsysbase/gettod.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/gettod.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,39 @@ +/* + * Stub version of gettimeofday. + */ + +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +int +_DEFUN(_gettimeofday_r,(ptr,ptimeval,ptimezone), + struct _reent *ptr _AND + struct timeval *ptimeval _AND + void *ptimezone) +{ +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int +_DEFUN (_gettimeofday, (ptimeval, ptimezone), + struct timeval *ptimeval _AND + void *ptimezone) +{ +//--------------------------------------------------------------------------------- + struct _reent *ptr = _REENT; +#endif + + if ( __syscalls.gettod_r ) return __syscalls.gettod_r(ptr, ptimeval, ptimezone); + + ptr->_errno = ENOSYS; + return -1; + +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/handle_manager.c newlib-2.0.0-ppc/libgloss/libsysbase/handle_manager.c --- newlib-2.0.0/libgloss/libsysbase/handle_manager.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/handle_manager.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,49 @@ +#include +#include + +#include "handle_manager.h" + +#define MAX_HANDLES 1024 + +static __handle* handles[MAX_HANDLES]; + +__LOCK_INIT_RECURSIVE(static, __hndl_lock); + +void __release_handle(int fd) { + + if ( fd < 3 || fd >= MAX_HANDLES + 3 ) return; + + fd -= 3; + __handle* handle = handles[fd]; + if ( NULL != handle ) { + free(handle); + handles[fd] = NULL; + } + +} + +int __alloc_handle(int size) { + + int i, ret = -1; + + __lock_acquire_recursive (__hndl_lock); + for ( i = 0; i < MAX_HANDLES; i++ ) { + if ( handles[i] == NULL ) break; + } + + if ( i < MAX_HANDLES ) { + handles[i] = malloc(size); + if ( NULL != handles[i] ) ret = i+3; + } + __lock_release_recursive (__hndl_lock); + + return ret; +} + +__handle *__get_handle(int fd) { + + if ( fd < 3 || fd > MAX_HANDLES + 3 ) return NULL; + + return handles[fd-3]; + +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/handle_manager.h newlib-2.0.0-ppc/libgloss/libsysbase/handle_manager.h --- newlib-2.0.0/libgloss/libsysbase/handle_manager.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/handle_manager.h 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,10 @@ +#ifndef __HANDLE_MANAGER_H__ +#define __HANDLE_MANAGER_H__ + +#include + +void __release_handle(int fd); +int __alloc_handle(int size); +__handle *__get_handle(int fd); + +#endif diff -Nbaur newlib-2.0.0/libgloss/libsysbase/iosupport.c newlib-2.0.0-ppc/libgloss/libsysbase/iosupport.c --- newlib-2.0.0/libgloss/libsysbase/iosupport.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/iosupport.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,122 @@ +#include +#include +#include + +static int defaultDevice = -1; + +//--------------------------------------------------------------------------------- +void setDefaultDevice( int device ) { +//--------------------------------------------------------------------------------- + + if ( device >2 && device <= STD_MAX) + defaultDevice = device; +} + +//--------------------------------------------------------------------------------- +const devoptab_t dotab_stdnull = { +//--------------------------------------------------------------------------------- + "stdnull", // device name + 0, // size of file structure + NULL, // device open + NULL, // device close + NULL, // device write + NULL, // device read + NULL, // device seek + NULL, // device fstat + NULL, // device stat + NULL, // device link + NULL, // device unlink + NULL, // device chdir + NULL, // device rename + NULL, // device mkdir + 0, // dirStateSize + NULL, // device diropen_r + NULL, // device dirreset_r + NULL, // device dirnext_r + NULL, // device dirclose_r + NULL, // device statvfs_r + NULL, // device ftruncate_r + NULL, // device fsync_r + NULL // deviceData +}; + +//--------------------------------------------------------------------------------- +const devoptab_t *devoptab_list[STD_MAX] = { +//--------------------------------------------------------------------------------- + &dotab_stdnull, &dotab_stdnull, &dotab_stdnull, &dotab_stdnull, + &dotab_stdnull, &dotab_stdnull, &dotab_stdnull, &dotab_stdnull, + &dotab_stdnull, &dotab_stdnull, &dotab_stdnull, &dotab_stdnull, + &dotab_stdnull, &dotab_stdnull, &dotab_stdnull, &dotab_stdnull +}; + +//--------------------------------------------------------------------------------- +int FindDevice(const char* name) { +//--------------------------------------------------------------------------------- + int i = 0, namelen, dev = -1; + + if (strchr(name, ':') == NULL) return defaultDevice; + + while(iname); + if(strncmp(devoptab_list[i]->name,name,namelen)==0 ) { + if ( name[namelen] == ':' || (isdigit(name[namelen]) && name[namelen+1] ==':' )) { + dev = i; + break; + } + } + } + i++; + } + + return dev; +} + +//--------------------------------------------------------------------------------- +int RemoveDevice( const char* name) { +//--------------------------------------------------------------------------------- + int dev = FindDevice(name); + + if ( -1 != dev ) { + devoptab_list[dev] = &dotab_stdnull; + return 0; + } + + return -1; + +} + +//--------------------------------------------------------------------------------- +int AddDevice( const devoptab_t* device) { +//--------------------------------------------------------------------------------- + + int devnum; + + for ( devnum = 3;devnum name, device->name) && + strlen(devoptab_list[devnum]->name) == strlen(device->name) ) || + !strcmp(devoptab_list[devnum]->name, "stdnull") + ) + break; + } + + if ( devnum == STD_MAX ) { + devnum = -1; + } else { + devoptab_list[devnum] = device; + } + return devnum; +} + +//--------------------------------------------------------------------------------- +const devoptab_t* GetDeviceOpTab (const char *name) { +//--------------------------------------------------------------------------------- + int dev = FindDevice(name); + if (dev >= 0 && dev < STD_MAX) { + return devoptab_list[dev]; + } else { + return NULL; + } +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/isatty.c newlib-2.0.0-ppc/libgloss/libsysbase/isatty.c --- newlib-2.0.0/libgloss/libsysbase/isatty.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/isatty.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,15 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +int _DEFUN(_isatty_r,(ptr,file), + struct _reent *ptr _AND + int file) { +#else +int _DEFUN(isatty,(file), + int file) { +#endif + return 0; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/kill.c newlib-2.0.0-ppc/libgloss/libsysbase/kill.c --- newlib-2.0.0/libgloss/libsysbase/kill.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/kill.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,23 @@ +/* + * Stub version of kill. + */ + +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +int _DEFUN(_kill_r,(ptr,pid,sig), + struct _reent *ptr _AND + int pid _AND + int sig) { +#else +int _DEFUN(_kill,(pid,sig), + int pid _AND + int sig) { + struct _reent *ptr = _REENT; +#endif + ptr->_errno = ENOSYS; + return -1; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/link.c newlib-2.0.0-ppc/libgloss/libsysbase/link.c --- newlib-2.0.0/libgloss/libsysbase/link.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/link.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,37 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +int _DEFUN (_link_r, (r, existing, new), + struct _reent *r _AND + const char *existing _AND + const char *new) { +#else +int _DEFUN (_link, (existing, new), + const char *existing _AND + const char *new) { + struct _reent *r = _REENT; +#endif + int ret; + int sourceDev = FindDevice(existing); + int destDev = FindDevice(new); + + ret = -1; + + if ( sourceDev == destDev) { + if (devoptab_list[destDev]->link_r) { + ret = devoptab_list[destDev]->link_r( r, existing, new); + } else { + r->_errno = ENOSYS; + } + } else { + r->_errno = EXDEV; + } + + return ret; +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/lseek.c newlib-2.0.0-ppc/libgloss/libsysbase/lseek.c --- newlib-2.0.0/libgloss/libsysbase/lseek.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/lseek.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,55 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include + +#include + +#include "handle_manager.h" + +//--------------------------------------------------------------------------------- +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +_off_t _DEFUN (_lseek_r, (r, fileDesc, pos, dir), + struct _reent * r _AND + int fileDesc _AND + _off_t pos _AND + int dir) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +_off_t _DEFUN (_lseek,(fileDesc, pos, dir), + int fileDesc _AND + _off_t pos _AND + int dir) { +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +//--------------------------------------------------------------------------------- +#endif +//--------------------------------------------------------------------------------- + _off_t ret = -1; + unsigned int dev = 0; + unsigned int fd = -1; + + __handle * handle; + + if(fileDesc!=-1) { + + if ( fileDesc < 3) { + dev = fileDesc; + } else { + handle = __get_handle(fileDesc); + + if ( NULL == handle ) return ret; + + dev = handle->device; + fd = (int)handle->fileStruct; + } + + if(devoptab_list[dev]->seek_r) + ret = devoptab_list[dev]->seek_r( r, fd, pos, dir); + + } + return ret; + +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/Makefile.in newlib-2.0.0-ppc/libgloss/libsysbase/Makefile.in --- newlib-2.0.0/libgloss/libsysbase/Makefile.in 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/Makefile.in 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,148 @@ +# Copyright (c) 1998 Cygnus Support +# +# The authors hereby grant permission to use, copy, modify, distribute, +# and license this software and its documentation for any purpose, provided +# that existing copyright notices are retained in all copies and that this +# notice is included verbatim in any distributions. No written agreement, +# license, or royalty fee is required for any of the authorized uses. +# Modifications to this software may be copyrighted by their authors +# and need not follow the licensing terms described here, provided that +# the new terms are clearly indicated on the first page of each file where +# they apply. + +DESTDIR = +VPATH = @srcdir@ +srcdir = @srcdir@ +objdir = . +srcroot = $(srcdir)/../.. +objroot = $(objdir)/../.. + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +host_alias = @host_alias@ +target_alias = @target_alias@ +program_transform_name = @program_transform_name@ + +bindir = @bindir@ +libdir = @libdir@ +tooldir = $(exec_prefix)/$(target_alias) + +# Multilib support variables. +# TOP is used instead of MULTI{BUILD,SRC}TOP. +MULTIDIRS = +MULTISUBDIR = +MULTIDO = true +MULTICLEAN = true + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +SHELL = /bin/sh + +CC = @CC@ + +#AS = @AS@ +AS = `if [ -f ${objroot}/../gas/as.new ] ; \ + then echo ${objroot}/../gas/as.new ; \ + else echo as ; fi` + +AR = @AR@ + +#LD = @LD@ +LD = `if [ -f ${objroot}/../ld/ld.new ] ; \ + then echo ${objroot}/../ld/ld.new ; \ + else echo ld ; fi` + +RANLIB = @RANLIB@ + +OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \ + then echo ${objroot}/../binutils/objdump ; \ + else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi` +OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \ + then echo ${objroot}/../binutils/objcopy ; \ + else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi` + +# object files needed +OBJS = abort.o iosupport.o close.o environ.o execve.o fork.o fstat.o getpid.o gettod.o \ + isatty.o kill.o link.o lseek.o open.o read.o sbrk.o stat.o \ + unlink.o wait.o write.o _exit.o malloc_vars.o \ + chdir.o mkdir.o rename.o build_argv.o statvfs.o \ + flock.o syscall_support.o handle_manager.o truncate.o ftruncate.o dirent.o fsync.o \ + fchmod.o chmod.o + +# Object files specific to particular targets. +EVALOBJS = ${OBJS} + +GCC_LDFLAGS = `if [ -d ${objroot}/../gcc ] ; \ + then echo -L${objroot}/../gcc ; fi` + +OUTPUTS = libsysbase.a + +NEWLIB_CFLAGS = `if [ -d ${objroot}/newlib ]; then echo -I${objroot}/newlib/targ-include -I${srcroot}/newlib/libc/include; fi` +NEWLIB_LDFLAGS = `if [ -d ${objroot}/newlib ]; then echo -B${objroot}/newlib/ -L${objroot}/newlib/; fi` + +INCLUDES = -I. -I$(srcdir)/.. +# Note that when building the library, ${MULTILIB} is not the way multilib +# options are passed; they're passed in $(CFLAGS). +CFLAGS_FOR_TARGET = ${MULTILIB} ${INCLUDES} ${NEWLIB_CFLAGS} +LDFLAGS_FOR_TARGET = ${MULTILIB} ${NEWLIB_LDFLAGS} +AR_FLAGS = qc + +.c.o: + $(CC) $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) -c $(CFLAGS) $< + +.C.o: + $(CC) $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) -c $(CFLAGS) $< +.s.o: + $(AS) $(ASFLAGS_FOR_TARGET) $(INCLUDES) $(ASFLAGS) -o $*.o $< + +# +# GCC knows to run the preprocessor on .S files before it assembles them. +# +.S.o: + $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -c $< + +# +# this is a bogus target that'll produce an assembler from the +# C source with the right compiler options. this is so we can +# track down code generation or debug symbol bugs. +# +.c.s: + $(CC) $(CFLAGS_FOR_TARGET) -S $(INCLUDES) $(CFLAGS) $< + +all: ${OUTPUTS} + +# +# here's where we build the library for each target +# + +libsysbase.a: $(EVALOBJS) + ${AR} ${ARFLAGS} $@ $(EVALOBJS) + ${RANLIB} $@ + +doc: + +clean mostlyclean: + rm -f $(OUTPUTS) *.i *~ *.o *-test *.srec *.dis *.map *.x + +distclean maintainer-clean realclean: clean + rm -f Makefile config.status $(OUTPUTS) + +.PHONY: install info install-info clean-info +install: + @for outputs in ${OUTPUTS}; do\ + mkdir -p $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \ + $(INSTALL_PROGRAM) $${outputs} $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \ + done + +info: +install-info: +clean-info: + +Makefile: Makefile.in config.status @host_makefile_frag_path@ + $(SHELL) config.status + +config.status: configure + $(SHELL) config.status --recheck diff -Nbaur newlib-2.0.0/libgloss/libsysbase/malloc_vars.c newlib-2.0.0-ppc/libgloss/libsysbase/malloc_vars.c --- newlib-2.0.0/libgloss/libsysbase/malloc_vars.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/malloc_vars.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,2 @@ +char *fake_heap_end = (char*)0; +char *fake_heap_start = (char*)0; diff -Nbaur newlib-2.0.0/libgloss/libsysbase/mkdir.c newlib-2.0.0-ppc/libgloss/libsysbase/mkdir.c --- newlib-2.0.0/libgloss/libsysbase/mkdir.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/mkdir.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,18 @@ +#include +#include +#include + +int mkdir (const char *path, mode_t mode) { + struct _reent *r = _REENT; + int ret; + int dev = FindDevice(path); + ret = -1; + + if (devoptab_list[dev]->mkdir_r) { + ret = devoptab_list[dev]->mkdir_r(r, path, mode); + } else { + r->_errno = ENOSYS; + } + + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/open.c newlib-2.0.0-ppc/libgloss/libsysbase/open.c --- newlib-2.0.0/libgloss/libsysbase/open.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/open.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,57 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include +#include + +#include "handle_manager.h" + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +int _DEFUN (_open_r, (r, file, flags, mode), + struct _reent * r _AND + const char *file _AND + int flags _AND + int mode) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int _DEFUN (_open, (file, flags, mode), + const char *file _AND + int flags _AND + int mode) { +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +#endif + __handle *handle; + int dev, fd, ret; + + dev = FindDevice(file); + + fd = -1; + if(dev!=-1 && devoptab_list[dev]->open_r) { + + fd = __alloc_handle(sizeof(__handle) + devoptab_list[dev]->structSize ); + + if ( -1 != fd ) { + handle = __get_handle(fd); + handle->device = dev; + handle->fileStruct = ((void *)handle) + sizeof(__handle); + + ret = devoptab_list[dev]->open_r(r, handle->fileStruct, file, flags, mode); + + if ( ret == -1 ) { + __release_handle(fd); + fd = -1; + } + } else { + r->_errno = ENOSR; + } + } else { + r->_errno = ENOSYS; + } + + return fd; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/read.c newlib-2.0.0-ppc/libgloss/libsysbase/read.c --- newlib-2.0.0/libgloss/libsysbase/read.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/read.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,48 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include + +#include "handle_manager.h" + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +_ssize_t _DEFUN(_read_r,(r, fileDesc, ptr, len), + struct _reent * r _AND + int fileDesc _AND + void *ptr _AND + size_t len) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +_ssize_t _DEFUN(_read,(fileDesc, ptr, len), + int fileDesc _AND + char *ptr _AND + size_t len) { +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +#endif + int ret = -1; + unsigned int dev = 0; + unsigned int fd = -1; + + __handle * handle = NULL; + + if(fileDesc!=-1) { + if ( fileDesc < 3) { + dev = fileDesc; + } else { + handle = __get_handle(fileDesc); + + if ( NULL == handle ) return ret; + + dev = handle->device; + fd = (int)handle->fileStruct; + } + if(devoptab_list[dev]->read_r) + ret = devoptab_list[dev]->read_r(r,fd,ptr,len); + } + return ret; +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/rename.c newlib-2.0.0-ppc/libgloss/libsysbase/rename.c --- newlib-2.0.0/libgloss/libsysbase/rename.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/rename.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,39 @@ +#include +#include +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +int +_DEFUN (_rename_r, (ptr, existing, newName), + struct _reent *ptr _AND + _CONST char *existing _AND + _CONST char *newName) +{ +#else +int +_DEFUN(rename, (existing, newName), + _CONST char *existing _AND + _CONST char *newName) +{ + struct _reent *ptr = _REENT; +#endif + struct _reent *r = _REENT; + + int ret; + int sourceDev = FindDevice(existing); + int destDev = FindDevice(newName); + + ret = -1; + + if ( sourceDev == destDev) { + if (devoptab_list[destDev]->rename_r) { + ret = devoptab_list[destDev]->rename_r( r, existing, newName); + } else { + r->_errno = ENOSYS; + } + } else { + r->_errno = EXDEV; + } + + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/sbrk.c newlib-2.0.0-ppc/libgloss/libsysbase/sbrk.c --- newlib-2.0.0/libgloss/libsysbase/sbrk.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/sbrk.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,26 @@ +#include "config.h" +#include +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +void * _sbrk_r (struct _reent *ptr, ptrdiff_t incr) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +caddr_t _sbrk (int incr) { +//--------------------------------------------------------------------------------- + struct _reent *ptr = _REENT; +#endif + + + if ( __syscalls.sbrk_r ) { + return __syscalls.sbrk_r(ptr, incr); + } else { + + ptr->_errno = ENOMEM; + return (caddr_t) -1; + + } + +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/stat.c newlib-2.0.0-ppc/libgloss/libsysbase/stat.c --- newlib-2.0.0/libgloss/libsysbase/stat.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/stat.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,39 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include +#include + + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +int _DEFUN (_stat_r,(r,file, st), + struct _reent * r _AND + const char *file _AND + struct stat *st) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int +_DEFUN (_stat, (file, st), + const char *file _AND + struct stat *st) +{ +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +#endif + int dev,ret; + + dev = FindDevice(file); + + if(dev!=-1 && devoptab_list[dev]->stat_r) { + ret = devoptab_list[dev]->stat_r(r,file,st); + } else { + ret = -1; + r->_errno = ENODEV; + } + return ret; +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/statvfs.c newlib-2.0.0-ppc/libgloss/libsysbase/statvfs.c --- newlib-2.0.0/libgloss/libsysbase/statvfs.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/statvfs.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,23 @@ +#include +#include +#include + + +int statvfs(const char *path, struct statvfs *buf) { + struct _reent *r = _REENT; + + int ret; + int device = FindDevice(path); + + ret = -1; + + if ( device != -1 && devoptab_list[device]->statvfs_r) { + + ret = devoptab_list[device]->statvfs_r(r, path, buf ); + + } else { + r->_errno = ENOSYS; + } + + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/syscall_support.c newlib-2.0.0-ppc/libgloss/libsysbase/syscall_support.c --- newlib-2.0.0/libgloss/libsysbase/syscall_support.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/syscall_support.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,66 @@ +#include + +//--------------------------------------------------------------------------------- +__syscalls_t __syscalls = { +//--------------------------------------------------------------------------------- + NULL, // sbrk + NULL, // lock_init + NULL, // lock_close + NULL, // lock_release + NULL, // lock_acquire + NULL, // malloc_lock + NULL, // malloc_unlock + NULL, // exit + NULL // gettod_r +}; + +int __libc_lock_init(int *lock,int recursive) { + + if ( __syscalls.lock_init ) { + return __syscalls.lock_init(lock, recursive); + } + + return 0; +} + +int __libc_lock_close( int *lock ) { + + if ( __syscalls.lock_close) { + return __syscalls.lock_close(lock); + } + + return 0; +} + +int __libc_lock_release( int *lock ) { + + if ( __syscalls.lock_release) { + return __syscalls.lock_release(lock); + } + + return 0; +} + +int __libc_lock_acquire( int *lock ) { + + if ( __syscalls.lock_acquire) { + return __syscalls.lock_acquire(lock); + } + + return 0; +} + +void __malloc_lock( struct _reent *ptr ) { + + if ( __syscalls.malloc_lock) { + __syscalls.malloc_lock(ptr); + } +} + +void __malloc_unlock( struct _reent *ptr ) { + + if ( __syscalls.malloc_unlock) { + __syscalls.malloc_unlock(ptr); + } +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/truncate.c newlib-2.0.0-ppc/libgloss/libsysbase/truncate.c --- newlib-2.0.0/libgloss/libsysbase/truncate.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/truncate.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,59 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include + +#include "handle_manager.h" + +int _DEFUN (truncate, (file, len), + const char *file _AND + off_t len) +{ + + __handle *handle; + int dev, fd, ret; + + struct _reent * r = _REENT; + + dev = FindDevice(file); + + fd = -1; + if(dev!=-1 && devoptab_list[dev]->open_r && devoptab_list[dev]->close_r && + devoptab_list[dev]->ftruncate_r) + { + + fd = __alloc_handle(sizeof(__handle) + devoptab_list[dev]->structSize ); + + if ( -1 != fd ) { + handle = __get_handle(fd); + handle->device = dev; + handle->fileStruct = ((void *)handle) + sizeof(__handle); + + ret = devoptab_list[dev]->open_r(r, handle->fileStruct, file, O_WRONLY, 0); + + if ( ret < 0 ) { + __release_handle(fd); + return ret; + } + + ret = devoptab_list[dev]->ftruncate_r(r, fd, len); + + devoptab_list[dev]->close_r(r, fd); + + if (ret >= 0) { + ret = devoptab_list[dev]->close_r(r, fd); + } else { + // Close it anyway, we don't want to leak memory + devoptab_list[dev]->close_r(r, fd); + } + } else { + r->_errno = ENOSR; + } + } else { + r->_errno = ENOSYS; + } + + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/libsysbase/unlink.c newlib-2.0.0-ppc/libgloss/libsysbase/unlink.c --- newlib-2.0.0/libgloss/libsysbase/unlink.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/unlink.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,33 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include +#include + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +int _DEFUN (_unlink_r, (r, name), + struct _reent * r _AND + const char *name ) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +int _DEFUN (_unlink, (name), + const char *name) { +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +#endif + int dev,ret; + + dev = FindDevice(name); + if(dev!=-1 && devoptab_list[dev]->unlink_r) { + ret = devoptab_list[dev]->unlink_r(r,name); + } else { + ret = -1; + r->_errno = ENODEV; + } + + return ret; +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/wait.c newlib-2.0.0-ppc/libgloss/libsysbase/wait.c --- newlib-2.0.0/libgloss/libsysbase/wait.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/wait.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,28 @@ +/* + * Stub version of wait. + */ + +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include + +//--------------------------------------------------------------------------------- +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +_DEFUN (_wait_r, (r, status), + struct _reent *r _AND + int *status) { + +#else +//--------------------------------------------------------------------------------- +int +_DEFUN (_wait, (status), + int *status) { + struct _reent *r = _REENT; +#endif +//--------------------------------------------------------------------------------- + r->_errno = ENOSYS; + return -1; +} + diff -Nbaur newlib-2.0.0/libgloss/libsysbase/warning.h newlib-2.0.0-ppc/libgloss/libsysbase/warning.h --- newlib-2.0.0/libgloss/libsysbase/warning.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/warning.h 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,43 @@ +#ifndef __WARNING_H__ +#define __WARNING_H__ + +#ifdef HAVE_GNU_LD +# ifdef HAVE_ELF + +/* We want the .gnu.warning.SYMBOL section to be unallocated. */ +# ifdef HAVE_ASM_PREVIOUS_DIRECTIVE +# define __make_section_unallocated(section_string) \ + asm(".section " section_string "; .previous"); +# elif defined (HAVE_ASM_POPSECTION_DIRECTIVE) +# define __make_section_unallocated(section_string) \ + asm(".pushsection " section_string "; .popsection"); +# else +# define __make_section_unallocated(section_string) +# endif + +# ifdef HAVE_SECTION_ATTRIBUTES +# define link_warning(symbol, msg) \ + __make_section_unallocated (".gnu.warning." #symbol) \ + static const char __evoke_link_warning_##symbol[] \ + __attribute__ ((section (".gnu.warning." #symbol))) = msg; +# else +# define link_warning(symbol, msg) +# endif + +#else /* !ELF */ + +# define link_warning(symbol, msg) \ + asm(".stabs \"" msg "\",30,0,0,0\n" \ + ".stabs \"" __SYMBOL_PREFIX #symbol "\",1,0,0,0\n"); +# endif +#else /* !GNULD */ +/* We will never be heard; they will all die horribly. */ +# define link_warning(symbol, msg) +#endif + +/* A canned warning for sysdeps/stub functions. */ +#define stub_warning(name) \ + link_warning (name, \ + "warning: " #name " is not implemented and will always fail") + +#endif /* __WARNING_H__ */ diff -Nbaur newlib-2.0.0/libgloss/libsysbase/write.c newlib-2.0.0-ppc/libgloss/libsysbase/write.c --- newlib-2.0.0/libgloss/libsysbase/write.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/libsysbase/write.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,49 @@ +#include "config.h" +#include <_ansi.h> +#include <_syslist.h> +#include +#include + +#include "handle_manager.h" + +#ifdef REENTRANT_SYSCALLS_PROVIDED +//--------------------------------------------------------------------------------- +_ssize_t _DEFUN(_write_r,(r, fileDesc, ptr, len), + struct _reent * r _AND + int fileDesc _AND + const void *ptr _AND + size_t len) { +//--------------------------------------------------------------------------------- +#else +//--------------------------------------------------------------------------------- +_ssize_t _DEFUN (_write, (fileDesc, ptr, len), + int fileDesc _AND + const char *ptr _AND + int len) { +//--------------------------------------------------------------------------------- + struct _reent *r = _REENT; +#endif + int ret = -1; + unsigned int dev = 0; + unsigned int fd = -1; + + __handle * handle = NULL; + + + if(fileDesc!=-1) { + if ( fileDesc < 3) { + dev = fileDesc; + ret = len; + } else { + handle = __get_handle(fileDesc); + + if ( NULL == handle ) return ret; + + dev = handle->device; + fd = (int)handle->fileStruct; + } + if(devoptab_list[dev]->write_r) + ret = devoptab_list[dev]->write_r(r,fd,ptr,len); + } + return ret; +} diff -Nbaur newlib-2.0.0/libgloss/rs6000/crtmain.c newlib-2.0.0-ppc/libgloss/rs6000/crtmain.c --- newlib-2.0.0/libgloss/rs6000/crtmain.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/rs6000/crtmain.c 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,18 @@ +#include + +struct __argv { + int argvMagic; //!< argv magic number, set to 0x5f617267 ('_arg') if valid + char *commandLine; //!< base address of command line, set of null terminated strings + int length;//!< total length of command line + int argc; + char **argv; +}; + +extern struct __argv *__system_argv; +void __init(); +void SYS_PreMain(); + +void __crtmain() { + SYS_PreMain(); + exit ( main(__system_argv->argc,__system_argv->argv) ); +} diff -Nbaur newlib-2.0.0/libgloss/rs6000/Makefile.in newlib-2.0.0-ppc/libgloss/rs6000/Makefile.in --- newlib-2.0.0/libgloss/rs6000/Makefile.in 2010-05-03 16:15:53.000000000 +0100 +++ newlib-2.0.0-ppc/libgloss/rs6000/Makefile.in 2013-09-06 22:13:38.000000000 +0100 @@ -129,6 +129,9 @@ XIL_TEST = xil-test XIL_INSTALL = install-xil +OGC_CRTMAIN = crtmain.o +OGC_INSTALL = install-ogc + # Host specific makefile fragment comes in here. @host_makefile_frag@ @@ -143,7 +146,7 @@ ${LINUX_CRT0} ${LINUX_BSP} \ ${YELLOWKNIFE_CRT0} ${YELLOWKNIFE_BSP} \ ${ADS_CRT0} ${ADS_BSP} \ - ${MBX_CRT0} ${MBX_BSP} \ + ${MBX_CRT0} ${MBX_BSP} ${OGC_CRTMAIN} \ ${XIL_CRT0} ${XIL_BSP} # @@ -295,6 +298,8 @@ crt0.o: crt0.S +crtmain.o: crtmain.c + simulator.o: simulator.S sim-getrusage.o: sim-getrusage.S sim-crt0.o: sim-crt0.S @@ -352,7 +357,7 @@ rm -f Makefile config.status *~ .PHONY: install info install-info clean-info -install: ${SIM_INSTALL} ${MVME_INSTALL} ${SOLARIS_INSTALL} ${LINUX_INSTALL} ${YELLOWKNIFE_INSTALL} ${ADS_INSTALL} ${MBX_INSTALL} ${XIL_INSTALL} +install: ${SIM_INSTALL} ${MVME_INSTALL} ${SOLARIS_INSTALL} ${LINUX_INSTALL} ${YELLOWKNIFE_INSTALL} ${ADS_INSTALL} ${MBX_INSTALL} ${OGC_INSTALL} ${XIL_INSTALL} install-sim: set -e; for x in ${SIM_CRT0} ${SIM_BSP} ${SIM_SCRIPTS}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done @@ -382,6 +387,9 @@ set -e; for x in ${XIL_CRT0} ${XIL_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib/$$x; done set -e; for x in ${XIL_SCRIPTS} ${XIL_SPECS}; do ${INSTALL_DATA} $(srcdir)/$$x $(DESTDIR)${tooldir}/lib/$$x; done +install-ogc: + set -e; for x in ${OGC_CRTMAIN}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done + doc: info: install-info: diff -Nbaur newlib-2.0.0/newlib/configure.host newlib-2.0.0-ppc/newlib/configure.host --- newlib-2.0.0/newlib/configure.host 2012-12-04 21:43:20.000000000 +0000 +++ newlib-2.0.0-ppc/newlib/configure.host 2013-09-06 22:13:38.000000000 +0100 @@ -711,7 +711,12 @@ default_newlib_io_long_long="yes" newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES" ;; - powerpc*-*-eabi* | \ + powerpc*-*-eabi*) + default_newlib_io_long_long="yes" + newlib_cflags="${newlib_cflags} -DREENTRANT_SYSCALLS_PROVIDED -D__DEFAULT_UTF8__" + newlib_cflags="${newlib_cflags} -ffunction-sections -fdata-sections" + syscall_dir=syscalls + ;; powerpc*-*-elf* | \ powerpc*-*-linux* | \ powerpc*-*-rtem* | \ diff -Nbaur newlib-2.0.0/newlib/libc/include/dirent.h newlib-2.0.0-ppc/newlib/libc/include/dirent.h --- newlib-2.0.0/newlib/libc/include/dirent.h 2001-11-30 17:26:47.000000000 +0000 +++ newlib-2.0.0-ppc/newlib/libc/include/dirent.h 2013-09-06 22:13:38.000000000 +0100 @@ -6,7 +6,7 @@ #include #if !defined(MAXNAMLEN) && !defined(_POSIX_SOURCE) -#define MAXNAMLEN 1024 +#define MAXNAMLEN 4096 #endif #ifdef __cplusplus diff -Nbaur newlib-2.0.0/newlib/libc/include/pthread.h newlib-2.0.0-ppc/newlib/libc/include/pthread.h --- newlib-2.0.0/newlib/libc/include/pthread.h 2010-12-08 14:44:06.000000000 +0000 +++ newlib-2.0.0-ppc/newlib/libc/include/pthread.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,359 +0,0 @@ -/* pthread.h - * - * Written by Joel Sherrill . - * - * COPYRIGHT (c) 1989-2010. - * On-Line Applications Research Corporation (OAR). - * - * Permission to use, copy, modify, and distribute this software for any - * purpose without fee is hereby granted, provided that this entire notice - * is included in all copies of any software which is or includes a copy - * or modification of this software. - * - * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED - * WARRANTY. IN PARTICULAR, THE AUTHOR MAKES NO REPRESENTATION - * OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS - * SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. - * - * $Id: pthread.h,v 1.9 2010/12/08 14:44:06 corinna Exp $ - */ - -#ifndef __PTHREAD_h -#define __PTHREAD_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include - -#if defined(_POSIX_THREADS) - -#include -#include -#include - -/* Register Fork Handlers */ -int _EXFUN(pthread_atfork,(void (*prepare)(void), void (*parent)(void), - void (*child)(void))); - -/* Mutex Initialization Attributes, P1003.1c/Draft 10, p. 81 */ - -int _EXFUN(pthread_mutexattr_init, (pthread_mutexattr_t *__attr)); -int _EXFUN(pthread_mutexattr_destroy, (pthread_mutexattr_t *__attr)); -int _EXFUN(pthread_mutexattr_getpshared, - (_CONST pthread_mutexattr_t *__attr, int *__pshared)); -int _EXFUN(pthread_mutexattr_setpshared, - (pthread_mutexattr_t *__attr, int __pshared)); - -#if defined(_UNIX98_THREAD_MUTEX_ATTRIBUTES) - -/* Single UNIX Specification 2 Mutex Attributes types */ - -int _EXFUN(pthread_mutexattr_gettype, - (_CONST pthread_mutexattr_t *__attr, int *__kind)); -int _EXFUN(pthread_mutexattr_settype, - (pthread_mutexattr_t *__attr, int __kind)); - -#endif - -/* Initializing and Destroying a Mutex, P1003.1c/Draft 10, p. 87 */ - -int _EXFUN(pthread_mutex_init, - (pthread_mutex_t *__mutex, _CONST pthread_mutexattr_t *__attr)); -int _EXFUN(pthread_mutex_destroy, (pthread_mutex_t *__mutex)); - -/* This is used to statically initialize a pthread_mutex_t. Example: - - pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; - */ - -#define PTHREAD_MUTEX_INITIALIZER ((pthread_mutex_t) 0xFFFFFFFF) - -/* Locking and Unlocking a Mutex, P1003.1c/Draft 10, p. 93 - NOTE: P1003.4b/D8 adds pthread_mutex_timedlock(), p. 29 */ - -int _EXFUN(pthread_mutex_lock, (pthread_mutex_t *__mutex)); -int _EXFUN(pthread_mutex_trylock, (pthread_mutex_t *__mutex)); -int _EXFUN(pthread_mutex_unlock, (pthread_mutex_t *__mutex)); - -#if defined(_POSIX_TIMEOUTS) - -int _EXFUN(pthread_mutex_timedlock, - (pthread_mutex_t *__mutex, _CONST struct timespec *__timeout)); - -#endif /* _POSIX_TIMEOUTS */ - -/* Condition Variable Initialization Attributes, P1003.1c/Draft 10, p. 96 */ - -int _EXFUN(pthread_condattr_init, (pthread_condattr_t *__attr)); -int _EXFUN(pthread_condattr_destroy, (pthread_condattr_t *__attr)); -int _EXFUN(pthread_condattr_getpshared, - (_CONST pthread_condattr_t *__attr, int *__pshared)); -int _EXFUN(pthread_condattr_setpshared, - (pthread_condattr_t *__attr, int __pshared)); - -/* Initializing and Destroying a Condition Variable, P1003.1c/Draft 10, p. 87 */ - -int _EXFUN(pthread_cond_init, - (pthread_cond_t *__cond, _CONST pthread_condattr_t *__attr)); -int _EXFUN(pthread_cond_destroy, (pthread_cond_t *__mutex)); - -/* This is used to statically initialize a pthread_cond_t. Example: - - pthread_cond_t cond = PTHREAD_COND_INITIALIZER; - */ - -#define PTHREAD_COND_INITIALIZER ((pthread_mutex_t) 0xFFFFFFFF) - -/* Broadcasting and Signaling a Condition, P1003.1c/Draft 10, p. 101 */ - -int _EXFUN(pthread_cond_signal, (pthread_cond_t *__cond)); -int _EXFUN(pthread_cond_broadcast, (pthread_cond_t *__cond)); - -/* Waiting on a Condition, P1003.1c/Draft 10, p. 105 */ - -int _EXFUN(pthread_cond_wait, - (pthread_cond_t *__cond, pthread_mutex_t *__mutex)); - -int _EXFUN(pthread_cond_timedwait, - (pthread_cond_t *__cond, pthread_mutex_t *__mutex, - _CONST struct timespec *__abstime)); - -#if defined(_POSIX_THREAD_PRIORITY_SCHEDULING) - -/* Thread Creation Scheduling Attributes, P1003.1c/Draft 10, p. 120 */ - -int _EXFUN(pthread_attr_setscope, - (pthread_attr_t *__attr, int __contentionscope)); -int _EXFUN(pthread_attr_getscope, - (_CONST pthread_attr_t *__attr, int *__contentionscope)); -int _EXFUN(pthread_attr_setinheritsched, - (pthread_attr_t *__attr, int __inheritsched)); -int _EXFUN(pthread_attr_getinheritsched, - (_CONST pthread_attr_t *__attr, int *__inheritsched)); -int _EXFUN(pthread_attr_setschedpolicy, - (pthread_attr_t *__attr, int __policy)); -int _EXFUN(pthread_attr_getschedpolicy, - (_CONST pthread_attr_t *__attr, int *__policy)); - -#endif /* defined(_POSIX_THREAD_PRIORITY_SCHEDULING) */ - -int _EXFUN(pthread_attr_setschedparam, - (pthread_attr_t *__attr, _CONST struct sched_param *__param)); -int _EXFUN(pthread_attr_getschedparam, - (_CONST pthread_attr_t *__attr, struct sched_param *__param)); - -#if defined(_POSIX_THREAD_PRIORITY_SCHEDULING) - -/* Dynamic Thread Scheduling Parameters Access, P1003.1c/Draft 10, p. 124 */ - -int _EXFUN(pthread_getschedparam, - (pthread_t __pthread, int *__policy, struct sched_param *__param)); -int _EXFUN(pthread_setschedparam, - (pthread_t __pthread, int __policy, struct sched_param *__param)); - -#endif /* defined(_POSIX_THREAD_PRIORITY_SCHEDULING) */ - -#if defined(_POSIX_THREAD_PRIO_INHERIT) || defined(_POSIX_THREAD_PRIO_PROTECT) - -/* Mutex Initialization Scheduling Attributes, P1003.1c/Draft 10, p. 128 */ - -int _EXFUN(pthread_mutexattr_setprotocol, - (pthread_mutexattr_t *__attr, int __protocol)); -int _EXFUN(pthread_mutexattr_getprotocol, - (_CONST pthread_mutexattr_t *__attr, int *__protocol)); -int _EXFUN(pthread_mutexattr_setprioceiling, - (pthread_mutexattr_t *__attr, int __prioceiling)); -int _EXFUN(pthread_mutexattr_getprioceiling, - (_CONST pthread_mutexattr_t *__attr, int *__prioceiling)); - -#endif /* _POSIX_THREAD_PRIO_INHERIT || _POSIX_THREAD_PRIO_PROTECT */ - -#if defined(_POSIX_THREAD_PRIO_PROTECT) - -/* Change the Priority Ceiling of a Mutex, P1003.1c/Draft 10, p. 131 */ - -int _EXFUN(pthread_mutex_setprioceiling, - (pthread_mutex_t *__mutex, int __prioceiling, int *__old_ceiling)); -int _EXFUN(pthread_mutex_getprioceiling, - (pthread_mutex_t *__mutex, int *__prioceiling)); - -#endif /* _POSIX_THREAD_PRIO_PROTECT */ - -/* Thread Creation Attributes, P1003.1c/Draft 10, p, 140 */ - -int _EXFUN(pthread_attr_init, (pthread_attr_t *__attr)); -int _EXFUN(pthread_attr_destroy, (pthread_attr_t *__attr)); -int _EXFUN(pthread_attr_setstack, (pthread_attr_t *attr, - void *__stackaddr, size_t __stacksize)); -int _EXFUN(pthread_attr_getstack, (_CONST pthread_attr_t *attr, - void **__stackaddr, size_t *__stacksize)); -int _EXFUN(pthread_attr_getstacksize, - (_CONST pthread_attr_t *__attr, size_t *__stacksize)); -int _EXFUN(pthread_attr_setstacksize, - (pthread_attr_t *__attr, size_t __stacksize)); -int _EXFUN(pthread_attr_getstackaddr, - (_CONST pthread_attr_t *__attr, void **__stackaddr)); -int _EXFUN(pthread_attr_setstackaddr, - (pthread_attr_t *__attr, void *__stackaddr)); -int _EXFUN(pthread_attr_getdetachstate, - (_CONST pthread_attr_t *__attr, int *__detachstate)); -int _EXFUN(pthread_attr_setdetachstate, - (pthread_attr_t *__attr, int __detachstate)); -int _EXFUN(pthread_attr_getguardsize, - (_CONST pthread_attr_t *__attr, size_t *__guardsize)); -int _EXFUN(pthread_attr_setguardsize, - (pthread_attr_t *__attr, size_t __guardsize)); - -/* Thread Creation, P1003.1c/Draft 10, p. 144 */ - -int _EXFUN(pthread_create, - (pthread_t *__pthread, _CONST pthread_attr_t *__attr, - void *(*__start_routine)( void * ), void *__arg)); - -/* Wait for Thread Termination, P1003.1c/Draft 10, p. 147 */ - -int _EXFUN(pthread_join, (pthread_t __pthread, void **__value_ptr)); - -/* Detaching a Thread, P1003.1c/Draft 10, p. 149 */ - -int _EXFUN(pthread_detach, (pthread_t __pthread)); - -/* Thread Termination, p1003.1c/Draft 10, p. 150 */ - -void _EXFUN(pthread_exit, (void *__value_ptr)); - -/* Get Calling Thread's ID, p1003.1c/Draft 10, p. XXX */ - -pthread_t _EXFUN(pthread_self, (void)); - -/* Compare Thread IDs, p1003.1c/Draft 10, p. 153 */ - -int _EXFUN(pthread_equal, (pthread_t __t1, pthread_t __t2)); - -/* Dynamic Package Initialization */ - -/* This is used to statically initialize a pthread_once_t. Example: - - pthread_once_t once = PTHREAD_ONCE_INIT; - - NOTE: This is named inconsistently -- it should be INITIALIZER. */ - -#define PTHREAD_ONCE_INIT { 1, 0 } /* is initialized and not run */ - -int _EXFUN(pthread_once, - (pthread_once_t *__once_control, void (*__init_routine)(void))); - -/* Thread-Specific Data Key Create, P1003.1c/Draft 10, p. 163 */ - -int _EXFUN(pthread_key_create, - (pthread_key_t *__key, void (*__destructor)( void * ))); - -/* Thread-Specific Data Management, P1003.1c/Draft 10, p. 165 */ - -int _EXFUN(pthread_setspecific, - (pthread_key_t __key, _CONST void *__value)); -void * _EXFUN(pthread_getspecific, (pthread_key_t __key)); - -/* Thread-Specific Data Key Deletion, P1003.1c/Draft 10, p. 167 */ - -int _EXFUN(pthread_key_delete, (pthread_key_t __key)); - -/* Execution of a Thread, P1003.1c/Draft 10, p. 181 */ - -#define PTHREAD_CANCEL_ENABLE 0 -#define PTHREAD_CANCEL_DISABLE 1 - -#define PTHREAD_CANCEL_DEFERRED 0 -#define PTHREAD_CANCEL_ASYNCHRONOUS 1 - -#define PTHREAD_CANCELED ((void *) -1) - -int _EXFUN(pthread_cancel, (pthread_t __pthread)); - -/* Setting Cancelability State, P1003.1c/Draft 10, p. 183 */ - -int _EXFUN(pthread_setcancelstate, (int __state, int *__oldstate)); -int _EXFUN(pthread_setcanceltype, (int __type, int *__oldtype)); -void _EXFUN(pthread_testcancel, (void)); - -/* Establishing Cancellation Handlers, P1003.1c/Draft 10, p. 184 */ - -void _EXFUN(pthread_cleanup_push, - (void (*__routine)( void * ), void *__arg)); -void _EXFUN(pthread_cleanup_pop, (int __execute)); - -#if defined(_POSIX_THREAD_CPUTIME) - -/* Accessing a Thread CPU-time Clock, P1003.4b/D8, p. 58 */ - -int _EXFUN(pthread_getcpuclockid, - (pthread_t __pthread_id, clockid_t *__clock_id)); - -#endif /* defined(_POSIX_THREAD_CPUTIME) */ - - -#endif /* defined(_POSIX_THREADS) */ - -#if defined(_POSIX_BARRIERS) - -int _EXFUN(pthread_barrierattr_init, (pthread_barrierattr_t *__attr)); -int _EXFUN(pthread_barrierattr_destroy, (pthread_barrierattr_t *__attr)); -int _EXFUN(pthread_barrierattr_getpshared, - (_CONST pthread_barrierattr_t *__attr, int *__pshared)); -int _EXFUN(pthread_barrierattr_setpshared, - (pthread_barrierattr_t *__attr, int __pshared)); - -#define PTHREAD_BARRIER_SERIAL_THREAD -1 - -int _EXFUN(pthread_barrier_init, - (pthread_barrier_t *__barrier, - _CONST pthread_barrierattr_t *__attr, unsigned __count)); -int _EXFUN(pthread_barrier_destroy, (pthread_barrier_t *__barrier)); -int _EXFUN(pthread_barrier_wait,(pthread_barrier_t *__barrier)); - -#endif /* defined(_POSIX_BARRIERS) */ - -#if defined(_POSIX_SPIN_LOCKS) - -int _EXFUN(pthread_spin_init, - (pthread_spinlock_t *__spinlock, int __pshared)); -int _EXFUN(pthread_spin_destroy, (pthread_spinlock_t *__spinlock)); -int _EXFUN(pthread_spin_lock, (pthread_spinlock_t *__spinlock)); -int _EXFUN(pthread_spin_trylock, (pthread_spinlock_t *__spinlock)); -int _EXFUN(pthread_spin_unlock, (pthread_spinlock_t *__spinlock)); - -#endif /* defined(_POSIX_SPIN_LOCKS) */ - -#if defined(_POSIX_READER_WRITER_LOCKS) - -int _EXFUN(pthread_rwlockattr_init, (pthread_rwlockattr_t *__attr)); -int _EXFUN(pthread_rwlockattr_destroy, (pthread_rwlockattr_t *__attr)); -int _EXFUN(pthread_rwlockattr_getpshared, - (_CONST pthread_rwlockattr_t *__attr, int *__pshared)); -int _EXFUN(pthread_rwlockattr_setpshared, - (pthread_rwlockattr_t *__attr, int __pshared)); - -int _EXFUN(pthread_rwlock_init, - (pthread_rwlock_t *__rwlock, _CONST pthread_rwlockattr_t *__attr)); -int _EXFUN(pthread_rwlock_destroy, (pthread_rwlock_t *__rwlock)); -int _EXFUN(pthread_rwlock_rdlock,(pthread_rwlock_t *__rwlock)); -int _EXFUN(pthread_rwlock_tryrdlock,(pthread_rwlock_t *__rwlock)); -int _EXFUN(pthread_rwlock_timedrdlock, - (pthread_rwlock_t *__rwlock, _CONST struct timespec *__abstime)); -int _EXFUN(pthread_rwlock_unlock,(pthread_rwlock_t *__rwlock)); -int _EXFUN(pthread_rwlock_wrlock,(pthread_rwlock_t *__rwlock)); -int _EXFUN(pthread_rwlock_trywrlock,(pthread_rwlock_t *__rwlock)); -int _EXFUN(pthread_rwlock_timedwrlock, - (pthread_rwlock_t *__rwlock, _CONST struct timespec *__abstime)); - -#endif /* defined(_POSIX_READER_WRITER_LOCKS) */ - - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff -Nbaur newlib-2.0.0/newlib/libc/include/stdint.h newlib-2.0.0-ppc/newlib/libc/include/stdint.h --- newlib-2.0.0/newlib/libc/include/stdint.h 2012-10-16 19:45:23.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/include/stdint.h 2013-09-06 22:13:38.000000000 +0100 @@ -75,14 +75,14 @@ #endif #endif -#if __have_long32 -typedef signed long int32_t; -typedef unsigned long uint32_t; -#define __int32_t_defined 1 -#elif __STDINT_EXP(INT_MAX) == 0x7fffffffL +#if __STDINT_EXP(INT_MAX) == 0x7fffffffL typedef signed int int32_t; typedef unsigned int uint32_t; #define __int32_t_defined 1 +#elif __have_long32 +typedef signed long int32_t; +typedef unsigned long uint32_t; +#define __int32_t_defined 1 #elif __STDINT_EXP(SHRT_MAX) == 0x7fffffffL typedef signed short int32_t; typedef unsigned short uint32_t; diff -Nbaur newlib-2.0.0/newlib/libc/include/stdio.h newlib-2.0.0-ppc/newlib/libc/include/stdio.h --- newlib-2.0.0/newlib/libc/include/stdio.h 2012-11-01 11:51:11.000000000 +0000 +++ newlib-2.0.0-ppc/newlib/libc/include/stdio.h 2013-09-06 22:13:38.000000000 +0100 @@ -206,7 +206,7 @@ #else int _EXFUN(fgetpos, (FILE *, fpos_t *)); #endif -int _EXFUN(fseek, (FILE *, long, int)); +int _EXFUN(fseek, (FILE *, off_t, int)); #ifdef _COMPILING_NEWLIB int _EXFUN(fsetpos, (FILE *, const _fpos_t *)); #else @@ -394,7 +394,7 @@ size_t _EXFUN(_fread_r, (struct _reent *, _PTR, size_t _size, size_t _n, FILE *)); int _EXFUN(_fscanf_r, (struct _reent *, FILE *, const char *, ...) _ATTRIBUTE ((__format__ (__scanf__, 3, 4)))); -int _EXFUN(_fseek_r, (struct _reent *, FILE *, long, int)); +int _EXFUN(_fseek_r, (struct _reent *, FILE *, off_t, int)); int _EXFUN(_fseeko_r,(struct _reent *, FILE *, _off_t, int)); long _EXFUN(_ftell_r, (struct _reent *, FILE *)); _off_t _EXFUN(_ftello_r,(struct _reent *, FILE *)); diff -Nbaur newlib-2.0.0/newlib/libc/include/sys/dirent.h newlib-2.0.0-ppc/newlib/libc/include/sys/dirent.h --- newlib-2.0.0/newlib/libc/include/sys/dirent.h 2005-10-04 21:47:39.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/include/sys/dirent.h 2013-09-06 22:13:38.000000000 +0100 @@ -4,10 +4,51 @@ not support , we will get this file which uses #error to force an error. */ +#ifndef _dirent_h_ +#define _dirent_h_ + +#include +#include +#include + +#define _DIRENT_HAVE_D_TYPE + +#define DT_UNKNOWN 0 +#define DT_FIFO 1 +#define DT_CHR 2 +#define DT_DIR 4 +#define DT_BLK 6 +#define DT_REG 8 +#define DT_LNK 10 +#define DT_SOCK 12 +#define DT_WHT 14 + #ifdef __cplusplus extern "C" { #endif -#error " not supported" + + struct dirent { + ino_t d_ino; + unsigned char d_type; + char d_name[NAME_MAX+1]; + }; + + typedef struct { + long int position; + DIR_ITER* dirData; + struct dirent fileData; + } DIR; + + int closedir(DIR *dirp); + DIR *opendir(const char *dirname); + struct dirent *readdir(DIR *dirp); + int readdir_r(DIR *dirp, struct dirent *entry, struct dirent **result); + void rewinddir(DIR *dirp); + void seekdir(DIR *dirp, long int loc); + long int telldir(DIR *dirp); + #ifdef __cplusplus } #endif + +#endif // _dirent_h_ \ No newline at end of file diff -Nbaur newlib-2.0.0/newlib/libc/include/sys/iosupport.h newlib-2.0.0-ppc/newlib/libc/include/sys/iosupport.h --- newlib-2.0.0/newlib/libc/include/sys/iosupport.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/include/sys/iosupport.h 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,94 @@ +//--------------------------------------------------------------------------------- +#ifndef __iosupp_h__ +#define __iosupp_h__ +//--------------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include +#include + +enum { + STD_IN, + STD_OUT, + STD_ERR, + STD_MAX = 16 +}; + + +typedef struct { + int device; + void *fileStruct; +} __handle; + +/* Directory iterator for mantaining state between dir* calls */ +typedef struct { + int device; + void *dirStruct; +} DIR_ITER; + +typedef struct { + const char *name; + int structSize; + int (*open_r)(struct _reent *r, void *fileStruct, const char *path, int flags, int mode); + int (*close_r)(struct _reent *r, int fd); + ssize_t (*write_r)(struct _reent *r, int fd, const char *ptr, size_t len); + ssize_t (*read_r)(struct _reent *r, int fd, char *ptr, size_t len); + off_t (*seek_r)(struct _reent *r, int fd, off_t pos, int dir); + int (*fstat_r)(struct _reent *r, int fd, struct stat *st); + int (*stat_r)(struct _reent *r, const char *file, struct stat *st); + int (*link_r)(struct _reent *r, const char *existing, const char *newLink); + int (*unlink_r)(struct _reent *r, const char *name); + int (*chdir_r)(struct _reent *r, const char *name); + int (*rename_r) (struct _reent *r, const char *oldName, const char *newName); + int (*mkdir_r) (struct _reent *r, const char *path, int mode); + + int dirStateSize; + + DIR_ITER* (*diropen_r)(struct _reent *r, DIR_ITER *dirState, const char *path); + int (*dirreset_r)(struct _reent *r, DIR_ITER *dirState); + int (*dirnext_r)(struct _reent *r, DIR_ITER *dirState, char *filename, struct stat *filestat); + int (*dirclose_r)(struct _reent *r, DIR_ITER *dirState); + int (*statvfs_r)(struct _reent *r, const char *path, struct statvfs *buf); + int (*ftruncate_r)(struct _reent *r, int fd, off_t len); + int (*fsync_r)(struct _reent *r, int fd); + + void *deviceData; + + int (*chmod_r)(struct _reent *r, const char *path, mode_t mode); + int (*fchmod_r)(struct _reent *r, int fd, mode_t mode); + +} devoptab_t; + +extern const devoptab_t *devoptab_list[]; + +typedef struct { + void *(*sbrk_r) (struct _reent *ptr, ptrdiff_t incr); + int (*lock_init) (int *lock,int recursive); + int (*lock_close) (int *lock); + int (*lock_release) (int *lock); + int (*lock_acquire) (int *lock); + void (*malloc_lock) (struct _reent *ptr); + void (*malloc_unlock) (struct _reent *ptr); + void (*exit) ( int rc ); + int (*gettod_r) (struct _reent *ptr, struct timeval *tp, struct timezone *tz); +} __syscalls_t; + +extern __syscalls_t __syscalls; + +int AddDevice( const devoptab_t* device); +int FindDevice(const char* name); +int RemoveDevice(const char* name); +void setDefaultDevice( int device ); +const devoptab_t* GetDeviceOpTab (const char *name); + +#ifdef __cplusplus +} +#endif + +//--------------------------------------------------------------------------------- +#endif // __iosupp_h__ +//--------------------------------------------------------------------------------- diff -Nbaur newlib-2.0.0/newlib/libc/include/sys/statvfs.h newlib-2.0.0-ppc/newlib/libc/include/sys/statvfs.h --- newlib-2.0.0/newlib/libc/include/sys/statvfs.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/include/sys/statvfs.h 2013-09-06 22:13:38.000000000 +0100 @@ -0,0 +1,35 @@ +#ifndef _SYS_STATVFS_H +#define _SYS_STATVFS_H + + +#define ST_RDONLY 0x0001 +#define ST_NOSUID 0x0002 + +#ifdef __cplusplus +extern "C" { +#endif + +#include + +struct statvfs { + unsigned long f_bsize; + unsigned long f_frsize; + fsblkcnt_t f_blocks; + fsblkcnt_t f_bfree; + fsblkcnt_t f_bavail; + fsfilcnt_t f_files; + fsfilcnt_t f_ffree; + fsfilcnt_t f_favail; + unsigned long f_fsid; + unsigned long f_flag; + unsigned long f_namemax; +}; + +int statvfs(const char *path, struct statvfs *buf); + +#ifdef __cplusplus +} +#endif + + +#endif // _SYS_STATVFS_H \ No newline at end of file diff -Nbaur newlib-2.0.0/newlib/libc/include/sys/syslimits.h newlib-2.0.0-ppc/newlib/libc/include/sys/syslimits.h --- newlib-2.0.0/newlib/libc/include/sys/syslimits.h 2002-08-23 02:56:03.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/include/sys/syslimits.h 2013-09-06 22:13:38.000000000 +0100 @@ -44,12 +44,12 @@ #define LINK_MAX 32767 /* max file link count */ #define MAX_CANON 255 /* max bytes in term canon input line */ #define MAX_INPUT 255 /* max bytes in terminal input */ -#define NAME_MAX 255 /* max bytes in a file name */ +#define NAME_MAX 767 /* max bytes in a file name */ #define NGROUPS_MAX 16 /* max supplemental group id's */ #ifndef OPEN_MAX #define OPEN_MAX 64 /* max open files per process */ #endif -#define PATH_MAX 1024 /* max bytes in pathname */ +#define PATH_MAX 4096 /* max bytes in pathname */ #define PIPE_BUF 512 /* max bytes for atomic pipe writes */ #define IOV_MAX 1024 /* max elements in i/o vector */ diff -Nbaur newlib-2.0.0/newlib/libc/include/sys/types.h newlib-2.0.0-ppc/newlib/libc/include/sys/types.h --- newlib-2.0.0/newlib/libc/include/sys/types.h 2012-07-06 11:41:21.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/include/sys/types.h 2013-09-06 22:13:38.000000000 +0100 @@ -134,7 +134,7 @@ defined(__sparc__) || defined(__SPU__) typedef unsigned long ino_t; #else -typedef unsigned short ino_t; +typedef unsigned int ino_t; #endif #endif /*__CYGWIN__*/ @@ -266,6 +266,9 @@ typedef unsigned long useconds_t; typedef long suseconds_t; +typedef __uint32_t fsblkcnt_t; +typedef __uint32_t fsfilcnt_t; + #include diff -Nbaur newlib-2.0.0/newlib/libc/include/sys/unistd.h newlib-2.0.0-ppc/newlib/libc/include/sys/unistd.h --- newlib-2.0.0/newlib/libc/include/sys/unistd.h 2012-07-06 11:41:21.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/include/sys/unistd.h 2013-09-06 22:13:38.000000000 +0100 @@ -222,12 +222,10 @@ int _EXFUN(_execve, (const char *__path, char * const __argv[], char * const __envp[] )); #endif -#if defined(__CYGWIN__) || defined(__rtems__) || defined(__sh__) || defined(__SPU__) #if !defined(__INSIDE_CYGWIN__) int _EXFUN(ftruncate, (int __fd, off_t __length)); int _EXFUN(truncate, (const char *, off_t __length)); #endif -#endif #if defined(__CYGWIN__) || defined(__rtems__) int _EXFUN(getdtablesize, (void)); diff -Nbaur newlib-2.0.0/newlib/libc/locale/locale.c newlib-2.0.0-ppc/newlib/libc/locale/locale.c --- newlib-2.0.0/newlib/libc/locale/locale.c 2012-03-29 21:27:15.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/locale/locale.c 2013-09-06 22:23:21.000000000 +0100 @@ -188,7 +188,7 @@ #define _LC_LAST 7 #define ENCODING_LEN 31 -#ifdef __CYGWIN__ /* Cygwin starts with LC_CTYPE set to "C.UTF-8". */ +#ifdef __DEFAULT_UTF8__ /* Cygwin starts with LC_CTYPE set to "C.UTF-8". */ int __EXPORT __mb_cur_max = 6; #else int __EXPORT __mb_cur_max = 1; @@ -240,7 +240,7 @@ static char current_categories[_LC_LAST][ENCODING_LEN + 1] = { "C", "C", -#ifdef __CYGWIN__ /* Cygwin starts with LC_CTYPE set to "C.UTF-8". */ +#ifdef __DEFAULT_UTF8__ /* Cygwin starts with LC_CTYPE set to "C.UTF-8". */ "C.UTF-8", #else "C", @@ -264,7 +264,7 @@ #endif /* _MB_CAPABLE */ -#ifdef __CYGWIN__ +#ifdef __DEFAULT_UTF8__ static char lc_ctype_charset[ENCODING_LEN + 1] = "UTF-8"; #else static char lc_ctype_charset[ENCODING_LEN + 1] = "ASCII"; diff -Nbaur newlib-2.0.0/newlib/libc/machine/powerpc/machine/_types.h newlib-2.0.0-ppc/newlib/libc/machine/powerpc/machine/_types.h --- newlib-2.0.0/newlib/libc/machine/powerpc/machine/_types.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/machine/powerpc/machine/_types.h 2013-09-06 22:13:47.000000000 +0100 @@ -0,0 +1,15 @@ +/* + * $Id: newlib-1.16.0.patch,v 1.8 2008-11-29 12:08:00 wntrmute Exp $ + */ + +#ifndef _MACHINE__TYPES_H +#define _MACHINE__TYPES_H +#include + +#define __fpos_t_defined +typedef long long _fpos_t; + +#define __off_t_defined +typedef long long _off_t; + +#endif // _MACHINE__TYPES_H diff -Nbaur newlib-2.0.0/newlib/libc/machine/powerpc/sys/lock.h newlib-2.0.0-ppc/newlib/libc/machine/powerpc/sys/lock.h --- newlib-2.0.0/newlib/libc/machine/powerpc/sys/lock.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/machine/powerpc/sys/lock.h 2013-09-06 22:13:47.000000000 +0100 @@ -0,0 +1,53 @@ +#ifndef __SYS_LOCK_H__ +#define __SYS_LOCK_H__ + +/* dummy lock routines for single-threaded aps */ + +typedef int _LOCK_T; +typedef int _LOCK_RECURSIVE_T; + +#define __LOCK_INIT(CLASS,NAME) CLASS _LOCK_T NAME = 0 +#define __LOCK_INIT_RECURSIVE(CLASS,NAME) CLASS _LOCK_RECURSIVE_T NAME = 0 + +#define __lock_init(NAME) \ + __libc_lock_init(&(NAME),0) + +#define __lock_init_recursive(NAME) \ + __libc_lock_init(&(NAME),1) + +#define __lock_close(NAME) \ + __libc_lock_close(&(NAME)) + +#define __lock_close_recursive(NAME) \ + __libc_lock_close(&(NAME)) + +#define __lock_acquire(NAME) \ + if(!(NAME)) __libc_lock_init(&(NAME),0); \ + __libc_lock_acquire(&(NAME)) + +#define __lock_acquire_recursive(NAME) \ + if(!(NAME)) __libc_lock_init(&(NAME),1); \ + __libc_lock_acquire(&(NAME)) + +#define __lock_try_acquire(NAME) \ + if(!(NAME)) __libc_lock_init(&(NAME),0); \ + __libc_lock_try_acquire(&(NAME)) + +#define __lock_try_acquire_recursive(NAME) \ + if(!(NAME)) __libc_lock_init(&(NAME),1); \ + __libc_lock_try_acquire(&(NAME)) + +#define __lock_release(NAME) \ + __libc_lock_release(&(NAME)) + +#define __lock_release_recursive(NAME) \ + __libc_lock_release(&(NAME)) + + +extern int __libc_lock_init(int*,int); +extern int __libc_lock_close(int*); +extern int __libc_lock_acquire(int*); +extern int __libc_lock_try_acquire(int*); +extern int __libc_lock_release(int*); + +#endif /* __SYS_LOCK_H__ */ diff -Nbaur newlib-2.0.0/newlib/libc/machine/powerpc/sys/stdio.h newlib-2.0.0-ppc/newlib/libc/machine/powerpc/sys/stdio.h --- newlib-2.0.0/newlib/libc/machine/powerpc/sys/stdio.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/machine/powerpc/sys/stdio.h 2013-09-06 22:13:47.000000000 +0100 @@ -0,0 +1,25 @@ +#ifndef _NEWLIB_STDIO_H +#define _NEWLIB_STDIO_H + +/* Internal locking macros, used to protect stdio functions. In the + general case, expand to nothing. */ +#if !defined(_flockfile) +# if !defined(__SINGLE_THREAD__) +# define _flockfile(fp) { ((fp)->_flags&__SSTR) ? 0 : __flockfile(fp); } + extern void __flockfile(FILE *fp); +# else +# define _flockfile(fp) +# endif +#endif /* __SINGLE_THREAD__ */ + +#if !defined(_funlockfile) +# if !defined(__SINGLE_THREAD__) +# define _funlockfile(fp) { ((fp)->_flags&__SSTR) ? 0 : __funlockfile(fp); } + extern void __funlockfile(FILE *fp); +# else +# define _funlockfile(fp) +# endif +#endif /* __SINGLE_THREAD__ */ + +#endif /* _NEWLIB_STDIO_H */ + diff -Nbaur newlib-2.0.0/newlib/libc/misc/init.c newlib-2.0.0-ppc/newlib/libc/misc/init.c --- newlib-2.0.0/newlib/libc/misc/init.c 2010-06-04 16:30:40.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/misc/init.c 2013-09-06 22:13:47.000000000 +0100 @@ -40,4 +40,8 @@ for (i = 0; i < count; i++) __init_array_start[i] (); } +#else + +#error why am I not defined + #endif diff -Nbaur newlib-2.0.0/newlib/libc/stdio/findfp.c newlib-2.0.0-ppc/newlib/libc/stdio/findfp.c --- newlib-2.0.0/newlib/libc/stdio/findfp.c 2012-06-05 17:17:16.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/stdio/findfp.c 2013-09-06 22:13:47.000000000 +0100 @@ -226,7 +226,8 @@ /* POSIX requires stderr to be opened for reading and writing, even when the underlying fd 2 is write-only. */ - std (s->_stderr, __SRW | __SNBF, 2, s); + //std (s->_stderr, __SRW | __SNBF, 2, s); + std (s->_stderr, __SWR | __SLBF, 2, s); s->__sdidinit = 1; diff -Nbaur newlib-2.0.0/newlib/libc/stdio/fopen.c newlib-2.0.0-ppc/newlib/libc/stdio/fopen.c --- newlib-2.0.0/newlib/libc/stdio/fopen.c 2012-05-30 09:58:42.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/stdio/fopen.c 2013-09-06 22:13:47.000000000 +0100 @@ -151,6 +151,9 @@ _newlib_flockfile_start (fp); + flags &= ~(__SLBF | __SNBF | __SMBF); + flags |= __SNBF; + fp->_file = f; fp->_flags = flags; fp->_cookie = (_PTR) fp; diff -Nbaur newlib-2.0.0/newlib/libc/stdio/fseek.c newlib-2.0.0-ppc/newlib/libc/stdio/fseek.c --- newlib-2.0.0/newlib/libc/stdio/fseek.c 2012-11-29 16:28:30.000000000 +0000 +++ newlib-2.0.0-ppc/newlib/libc/stdio/fseek.c 2013-09-06 22:13:47.000000000 +0100 @@ -108,7 +108,7 @@ _DEFUN(_fseek_r, (ptr, fp, offset, whence), struct _reent *ptr _AND register FILE *fp _AND - long offset _AND + off_t offset _AND int whence) { return _fseeko_r (ptr, fp, offset, whence); @@ -119,7 +119,7 @@ int _DEFUN(fseek, (fp, offset, whence), register FILE *fp _AND - long offset _AND + off_t offset _AND int whence) { return _fseek_r (_REENT, fp, offset, whence); diff -Nbaur newlib-2.0.0/newlib/libc/stdio/fvwrite.c newlib-2.0.0-ppc/newlib/libc/stdio/fvwrite.c --- newlib-2.0.0/newlib/libc/stdio/fvwrite.c 2011-12-20 09:06:58.000000000 +0000 +++ newlib-2.0.0-ppc/newlib/libc/stdio/fvwrite.c 2013-09-06 22:13:47.000000000 +0100 @@ -94,7 +94,8 @@ do { GETIOV (;); - w = fp->_write (ptr, fp->_cookie, p, MIN (len, BUFSIZ)); + //w = fp->_write (ptr, fp->_cookie, p, MIN (len, BUFSIZ)); + w = fp->_write (ptr, fp->_cookie, p, len); if (w <= 0) goto err; p += w; diff -Nbaur newlib-2.0.0/newlib/libc/stdio/Makefile.am newlib-2.0.0-ppc/newlib/libc/stdio/Makefile.am --- newlib-2.0.0/newlib/libc/stdio/Makefile.am 2009-07-03 12:58:04.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/stdio/Makefile.am 2013-09-06 22:13:47.000000000 +0100 @@ -54,6 +54,7 @@ rename.c \ rewind.c \ rget.c \ + rmdir.c \ scanf.c \ sccl.c \ setbuf.c \ diff -Nbaur newlib-2.0.0/newlib/libc/stdio/Makefile.in newlib-2.0.0-ppc/newlib/libc/stdio/Makefile.in --- newlib-2.0.0/newlib/libc/stdio/Makefile.in 2012-12-20 21:10:06.000000000 +0000 +++ newlib-2.0.0-ppc/newlib/libc/stdio/Makefile.in 2013-09-06 22:13:47.000000000 +0100 @@ -96,6 +96,7 @@ lib_a-refill.$(OBJEXT) lib_a-remove.$(OBJEXT) \ lib_a-rename.$(OBJEXT) lib_a-rewind.$(OBJEXT) \ lib_a-rget.$(OBJEXT) lib_a-scanf.$(OBJEXT) \ + lib_a-rmdir.$(OBJEXT) \ lib_a-sccl.$(OBJEXT) lib_a-setbuf.$(OBJEXT) \ lib_a-setbuffer.$(OBJEXT) lib_a-setlinebuf.$(OBJEXT) \ lib_a-setvbuf.$(OBJEXT) lib_a-siprintf.$(OBJEXT) \ @@ -165,7 +166,7 @@ getc_u.lo getchar_u.lo getdelim.lo getline.lo gets.lo \ iprintf.lo iscanf.lo makebuf.lo perror.lo printf.lo putc.lo \ putchar.lo putc_u.lo putchar_u.lo puts.lo refill.lo remove.lo \ - rename.lo rewind.lo rget.lo scanf.lo sccl.lo setbuf.lo \ + rename.lo rewind.lo rget.lo rmdir.lo scanf.lo sccl.lo setbuf.lo \ setbuffer.lo setlinebuf.lo setvbuf.lo siprintf.lo siscanf.lo \ sniprintf.lo snprintf.lo sprintf.lo sscanf.lo stdio.lo \ tmpfile.lo tmpnam.lo ungetc.lo vdiprintf.lo vdprintf.lo \ @@ -432,6 +433,7 @@ rename.c \ rewind.c \ rget.c \ + rmdir.c \ scanf.c \ sccl.c \ setbuf.c \ @@ -981,6 +983,12 @@ lib_a-rget.obj: rget.c $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-rget.obj `if test -f 'rget.c'; then $(CYGPATH_W) 'rget.c'; else $(CYGPATH_W) '$(srcdir)/rget.c'; fi` +lib_a-rmdir.o: rmdir.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-rmdir.o `test -f 'rmdir.c' || echo '$(srcdir)/'`rmdir.c + +lib_a-rmdir.obj: rmdir.c + $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-rmdir.obj `if test -f 'rmdir.c'; then $(CYGPATH_W) 'rmdir.c'; else $(CYGPATH_W) '$(srcdir)/rmdir.c'; fi` + lib_a-scanf.o: scanf.c $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-scanf.o `test -f 'scanf.c' || echo '$(srcdir)/'`scanf.c diff -Nbaur newlib-2.0.0/newlib/libc/stdio/rmdir.c newlib-2.0.0-ppc/newlib/libc/stdio/rmdir.c --- newlib-2.0.0/newlib/libc/stdio/rmdir.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/stdio/rmdir.c 2013-09-06 22:13:47.000000000 +0100 @@ -0,0 +1,90 @@ +/* + * Copyright (c) 1990 The Regents of the University of California. + * All rights reserved. + * + * Redistribution and use in source and binary forms are permitted + * provided that the above copyright notice and this paragraph are + * duplicated in all such forms and that any documentation, + * advertising materials, and other materials related to such + * distribution and use acknowledge that the software was developed + * by the University of California, Berkeley. The name of the + * University may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ + +/* +FUNCTION +<>---delete a directory + +INDEX + rmdir +INDEX + _rmdir_r + +ANSI_SYNOPSIS + #include + int rmdir(char *<[filename]>); + + int _rmdir_r(struct _reent *<[reent]>, char *<[filename]>); + +TRAD_SYNOPSIS + #include + int rmdir(<[filename]>) + char *<[filename]>; + + int _rmdir_r(<[reent]>, <[filename]>) + struct _reent *<[reent]>; + char *<[filename]>; + +DESCRIPTION +Use <> to dissolve the association between a particular +filename (the string at <[filename]>) and the file it represents. +After calling <> with a particular filename, you will no +longer be able to open the file by that name. + +In this implementation, you may use <> on an open file without +error; existing file descriptors for the file will continue to access +the file's data until the program using them closes the file. + +The alternate function <<_rmdir_r>> is a reentrant version. The +extra argument <[reent]> is a pointer to a reentrancy structure. + +RETURNS +<> returns <<0>> if it succeeds, <<-1>> if it fails. + +PORTABILITY +ANSI C requires <>, but only specifies that the result on +failure be nonzero. The behavior of <> when you call it on an +open file may vary among implementations. + +Supporting OS subroutine required: <>. +*/ + +#include <_ansi.h> +#include +#include + +int +_DEFUN(_rmdir_r, (ptr, filename), + struct _reent *ptr _AND + _CONST char *filename) +{ + if (_unlink_r (ptr, filename) == -1) + return -1; + + return 0; +} + +#ifndef _REENT_ONLY + +int +_DEFUN(rmdir, (filename), + _CONST char *filename) +{ + return _rmdir_r (_REENT, filename); +} + +#endif diff -Nbaur newlib-2.0.0/newlib/libc/stdlib/mbtowc_r.c newlib-2.0.0-ppc/newlib/libc/stdlib/mbtowc_r.c --- newlib-2.0.0/newlib/libc/stdlib/mbtowc_r.c 2012-08-08 12:04:18.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/stdlib/mbtowc_r.c 2013-09-06 22:13:47.000000000 +0100 @@ -9,7 +9,7 @@ int (*__mbtowc) (struct _reent *, wchar_t *, const char *, size_t, const char *, mbstate_t *) -#ifdef __CYGWIN__ +#ifdef __DEFAULT_UTF8__ /* Cygwin starts up in UTF-8 mode. */ = __utf8_mbtowc; #else diff -Nbaur newlib-2.0.0/newlib/libc/stdlib/mlock.c newlib-2.0.0-ppc/newlib/libc/stdlib/mlock.c --- newlib-2.0.0/newlib/libc/stdlib/mlock.c 2005-10-28 22:21:07.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/stdlib/mlock.c 2013-09-06 22:13:47.000000000 +0100 @@ -39,6 +39,7 @@ #include #include +/* #ifndef __SINGLE_THREAD__ __LOCK_INIT_RECURSIVE(static, __malloc_lock_object); #endif @@ -60,5 +61,5 @@ __lock_release_recursive (__malloc_lock_object); #endif } - +*/ #endif diff -Nbaur newlib-2.0.0/newlib/libc/stdlib/wctomb_r.c newlib-2.0.0-ppc/newlib/libc/stdlib/wctomb_r.c --- newlib-2.0.0/newlib/libc/stdlib/wctomb_r.c 2012-08-08 12:04:18.000000000 +0100 +++ newlib-2.0.0-ppc/newlib/libc/stdlib/wctomb_r.c 2013-09-06 22:13:47.000000000 +0100 @@ -8,7 +8,7 @@ int (*__wctomb) (struct _reent *, char *, wchar_t, const char *charset, mbstate_t *) -#ifdef __CYGWIN__ +#ifdef __DEFAULT_UTF8__ /* Cygwin starts up in UTF-8 mode. */ = __utf8_wctomb; #else diff -Nbaur newlib-2.0.0/newlib/libc/syscalls/Makefile.am newlib-2.0.0-ppc/newlib/libc/syscalls/Makefile.am --- newlib-2.0.0/newlib/libc/syscalls/Makefile.am 2008-01-03 22:33:37.000000000 +0000 +++ newlib-2.0.0-ppc/newlib/libc/syscalls/Makefile.am 2013-09-06 22:13:47.000000000 +0100 @@ -22,7 +22,6 @@ sysunlink.c \ syswrite.c - ## Weed out EL/IX level 3 interfaces if necessary if ELIX_LEVEL_1 ELIX_SOURCES =