updates for devkitPPC r32

.gitignore

@@ -1,7 +1,7 @@
 config.sh
 .devkitARM*
 .devkitPPC*
-.devkitPSP*
+.devkitA64*
 *.gz
 *.bz2
 *~

README.TXT

@@ -1,9 +1,14 @@
 devkitPro build scripts
 --------------------------
 
-This readme will guide you through building devkitARM, devkitPPC or devkitPSP
+This readme will guide you through building devkitARM, devkitPPC or devkitA64
 from source using a set of scripts.
 
+Please note that we can't guarantee that what you build with these scripts
+will function in the same way as the binaries we distribute. Where possible
+you should use the binary distributions. We also offer no support for any
+problems you may encounter with these scripts.
+
 The windows versions of the toolchains are now cross compiled on linux using
 mingw-w64
 
@@ -26,19 +31,35 @@ http://www.multiprecision.org/
 sudo apt-get install libgmp-dev libmpfr-dev libmpc-dev
 
 Some of the tools for devkitARM and devkitPPC also require FreeImage, zlib,
-and libusb. Again these are built as static libraries for ease of packaging
+expat, and libusb. Again these are built as static libraries for ease of
-but you can probably use the versions supplied by your distro.
+packaging but you can probably use the versions supplied by your distro.
 
 http://freeimage.sourceforge.net/
 http://www.zlib.net
 http://www.libusb.org
+http://expat.sourceforge.net/
+
+sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev libudev-dev libexpat1-dev
 
-sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev
 
 Building gxtexconv for cube/wii needs GL/gl.h which can be obtained with
 
 sudo apt-get install mesa-common-dev
 
+Tools for devkitA64 require liblz4.
+
+http://lz4.github.io/lz4/
+
+sudo apt-get install liblz4-dev
+
+The liblz4 with Ubuntu 14.04 isn't new enough. Either upgrade to at least 16.04 or
+build this from source.
+
+For building the OSX versions we install the Xcode commandline tools and build
+pkg-config from source as well as static versions of the libraries listed above.
+This helps keep the dependencies to a minimum so end users can use the tools
+with only Xcode command line tools to obtain make.
+
 To avoid having to manually answer prompts during the build the script will
 read variables from config.sh if it exists. Copy config.sh.sample to config.sh
 and set the variables as appropriate for your build.
@@ -85,16 +106,6 @@ to use the built in crt0 and linkscript use powerpc-eabi-gcc to link your projec
 using the command line switch -mgcn for a bare bones system, -mogc to use libogc and
 the multi-threaded microkernel for gamecube, -mrvl for wii, -mwup for wii u.
 
-Using devkitPSP
----------------
-
-All you need to do now to use devkitPSP is make sure that your freshly built tools
-are in your PATH, something like this;
-
-export PATH=$PATH:<path to devkitPSP>/bin
-
-(Obviously replace <path to devkitPSP> with the full path to the devkitPSP
-installation directory)
 
 Getting started
 ---------------

build-devkit.sh

@@ -1,15 +1,15 @@
 #!/bin/bash
 #---------------------------------------------------------------------------------
-#	devkitARM release 46
+#	devkitARM release 49
-#	devkitPPC release 29-1
+#	devkitPPC release 32
+#	devkitA64 release 10
 #---------------------------------------------------------------------------------
 
 if [ 0 -eq 1 ] ; then
-	echo "Currently in release cycle, proceed with caution, do not report problems, do not ask for support."
 	echo "Please use the latest release buildscripts unless advised otherwise by devkitPro staff."
-	echo "http://sourceforge.net/projects/devkitpro/files/buildscripts/"
+	echo "https://github.com/devkitPro/buildscripts/releases/latest"
 	echo
-	echo "The scripts in the git repository are quite often dependent on things which currently only exist"
+	echo "The scripts in the git repository may be dependent on things which currently only exist"
 	echo "on developer machines. This is not a bug, use stable releases."
 	exit 1
 fi
@@ -18,43 +18,49 @@ echo "Please note, these scripts are provided as a courtesy, toolchains built wi
 echo "are for personal use only and may not be distributed by entities other than devkitPro."
 echo "See http://devkitpro.org/wiki/Trademarks"
 echo
-echo "Patches and improvements are of course welcome, please send these to the patch tracker"
+echo "Patches and improvements are of course welcome, please submit a PR"
-echo "https://sourceforge.net/tracker/?group_id=114505&atid=668553"
+echo "https://github.com/devkitPro/buildscripts/pulls"
 echo
 
 
-GENERAL_TOOLS_VER=1.0.0
+GENERAL_TOOLS_VER=1.0.2
 
-LIBGBA_VER=0.5.0
+LIBGBA_VER=0.5.1
-GBATOOLS_VER=1.0.0
+GBATOOLS_VER=1.1.0
 
-LIBNDS_VER=1.6.2
+LIBNDS_VER=1.7.2
-DEFAULT_ARM7_VER=0.7.0
+DEFAULT_ARM7_VER=0.7.4
-DSWIFI_VER=0.4.0
+DSWIFI_VER=0.4.2
-MAXMOD_VER=1.0.10
+MAXMOD_VER=1.0.11
-FILESYSTEM_VER=0.9.13
+FILESYSTEM_VER=0.9.14
-LIBFAT_VER=1.1.0
+LIBFAT_VER=1.1.3
-DSTOOLS_VER=1.1.0
+DSTOOLS_VER=1.2.1
-GRIT_VER=0.8.14
+GRIT_VER=0.8.15
-NDSTOOL_VER=2.0.1
+NDSTOOL_VER=2.1.1
-DLDITOOL_VER=1.24.0
+MMUTIL_VER=1.8.7
-MMUTIL_VER=1.8.6
 
 DFU_UTIL_VER=0.9.1
-STLINK_VER=1.2.2
+STLINK_VER=1.2.3
 
-GAMECUBE_TOOLS_VER=1.0.1
+GAMECUBE_TOOLS_VER=1.0.2
-LIBOGC_VER=1.8.16
+LIBOGC_VER=1.8.20
 WIILOAD_VER=0.5.1
 
-LIBCTRU_VER=1.2.0
+LIBCTRU_VER=1.5.0
-CITRO3D_VER=1.2.0
+CITRO3D_VER=1.4.0
+CITRO2D_VER=1.0.0
 TOOLS3DS_VER=1.1.4
-LINK3DS_VER=0.5.1
+LINK3DS_VER=0.5.2
-PICASSO_VER=2.5.0
+PICASSO_VER=2.7.0
+TEX3DS_VER=1.0.0
 
-GP32_TOOLS_VER=1.0.2
+GP32_TOOLS_VER=1.0.3
-LIBMIRKO_VER=0.9.7
+LIBMIRKO_VER=0.9.8
+
+SWITCH_TOOLS_VER=1.4.0
+LIBNX_VER=1.2.1
+
+OSXMIN=${OSXMIN:-10.9}
 
 #---------------------------------------------------------------------------------
 function extract_and_patch {
@@ -146,9 +152,13 @@ TOOLPATH=$(echo $INSTALLDIR | sed -e 's/^\([a-zA-Z]\):/\/\1/')
 export PATH=$PATH:$TOOLPATH/$package/bin
 
 if [ ! -z $CROSSBUILD ]; then
+	toolsprefix=$INSTALLDIR/$CROSSBUILD/tools
 	prefix=$INSTALLDIR/$CROSSBUILD/$package
+	toolsprefix=$INSTALLDIR/$CROSSBUILD/tools
 	CROSS_PARAMS="--build=`./config.guess` --host=$CROSSBUILD"
+	CROSS_GCC_PARAMS="--with-gmp=$CROSSPATH --with-mpfr=$CROSSPATH --with-mpc=$CROSSPATH"
 else
+	toolsprefix=$INSTALLDIR/tools
 	prefix=$INSTALLDIR/$package
 fi
 
@@ -165,40 +175,52 @@ PLATFORM=`uname -s`
 
 case $PLATFORM in
 	Darwin )
-		cflags="-mmacosx-version-min=10.5 -isysroot /Developer/SDKs/MacOSX10.5.sdk -I/usr/local/include"
+		cppflags="-mmacosx-version-min=${OSXMIN} -I/usr/local/include"
-		ldflags="-mmacosx-version-min=10.5 -Wl,-syslibroot,/Developer/SDKs/MacOSX10.5.sdk -L/usr/local/lib"
+		ldflags="-mmacosx-version-min=${OSXMIN} -L/usr/local/lib"
+		if [ "x${OSXSDKPATH}x" != "xx" ]; then
+			cppflags="$cppflags -isysroot ${OSXSDKPATH}"
+			ldflags="$ldflags -Wl,-syslibroot,${OSXSDKPATH}"
+		fi
+		TESTCC=`cc -v 2>&1 | grep clang`
+		if [ "x${TESTCC}x" != "xx" ]; then
+			cppflags="$cppflags -fbracket-depth=512"
+		fi
     ;;
 	MINGW32* )
-		cflags="-D__USE_MINGW_ACCESS"
+		cppflags="-D__USE_MINGW_ACCESS"
-# horrid hack to get -flto to work on windows
-		plugin_ld="--with-plugin-ld=ld"
     ;;
 esac
 
+if [ ! -z $CROSSBUILD ] && grep -q "mingw" <<<"$CROSSBUILD" ; then
+	cppflags="-D__USE_MINGW_ACCESS -D__USE_MINGW_ANSI_STDIO=1"
+fi
+
+
 BUILDSCRIPTDIR=$(pwd)
 BUILDDIR=$(pwd)/.$package
+
 if [ ! -z $CROSSBUILD ]; then
 	BUILDDIR=$BUILDDIR-$CROSSBUILD
 fi
-DEVKITPRO_URL="http://downloads.sourceforge.net/devkitpro"
 
 patchdir=$(pwd)/$basedir/patches
 scriptdir=$(pwd)/$basedir/scripts
 
-archives="binutils-${BINUTILS_VER}.tar.bz2 gcc-${GCC_VER}.tar.bz2 newlib-${NEWLIB_VER}.tar.gz gdb-${GDB_VER}.tar.bz2"
+archives="binutils-${BINUTILS_VER}.tar.bz2 gcc-${GCC_VER}.tar.xz newlib-${NEWLIB_VER}.tar.gz gdb-${GDB_VER}.tar.xz"
 
 if [ $VERSION -eq 1 ]; then
 
 	targetarchives="libnds-src-${LIBNDS_VER}.tar.bz2 libgba-src-${LIBGBA_VER}.tar.bz2
 		libmirko-src-${LIBMIRKO_VER}.tar.bz2 dswifi-src-${DSWIFI_VER}.tar.bz2 maxmod-src-${MAXMOD_VER}.tar.bz2
-		default_arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
+		default-arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
-		libfat-src-${LIBFAT_VER}.tar.bz2 libctru-src-${LIBCTRU_VER}.tar.bz2  citro3d-src-${CITRO3D_VER}.tar.bz2"
+		libfat-src-${LIBFAT_VER}.tar.bz2 libctru-src-${LIBCTRU_VER}.tar.bz2  citro3d-src-${CITRO3D_VER}.tar.bz2
+		citro2d-src-${CITRO2D_VER}.tar.bz2"
 
-	hostarchives="gbatools-$GBATOOLS_VER.tar.bz2 gp32tools-$GP32_TOOLS_VER.tar.bz2
+	hostarchives="gba-tools-$GBATOOLS_VER.tar.bz2 gp32-tools-$GP32_TOOLS_VER.tar.bz2
 		dstools-$DSTOOLS_VER.tar.bz2 grit-$GRIT_VER.tar.bz2 ndstool-$NDSTOOL_VER.tar.bz2
-		general-tools-$GENERAL_TOOLS_VER.tar.bz2 dlditool-$DLDITOOL_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2
+		general-tools-$GENERAL_TOOLS_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2
 		dfu-util-$DFU_UTIL_VER.tar.bz2 stlink-$STLINK_VER.tar.bz2 3dstools-$TOOLS3DS_VER.tar.bz2
-		picasso-$PICASSO_VER.tar.bz2 3dslink-$LINK3DS_VER.tar.bz2"
+		picasso-$PICASSO_VER.tar.bz2 tex3ds-$TEX3DS_VER.tar.bz2 3dslink-$LINK3DS_VER.tar.bz2"
 fi
 
 if [ $VERSION -eq 2 ]; then
@@ -210,6 +232,14 @@ if [ $VERSION -eq 2 ]; then
 	archives="binutils-${MN_BINUTILS_VER}.tar.bz2 $archives"
 fi
 
+if [ $VERSION -eq 3 ]; then
+
+	targetarchives=" libnx-src-${LIBNX_VER}.tar.bz2"
+
+	hostarchives="general-tools-$GENERAL_TOOLS_VER.tar.bz2 switch-tools-$SWITCH_TOOLS_VER.tar.bz2"
+
+fi
+
 
 if [ ! -z "$BUILD_DKPRO_SRCDIR" ] ; then
 	SRCDIR="$BUILD_DKPRO_SRCDIR"
@@ -222,7 +252,7 @@ for archive in $archives $targetarchives $hostarchives
 do
 	echo $archive
 	if [ ! -f $archive ]; then
-		$FETCH http://downloads.sf.net/devkitpro/$archive || { echo "Error: Failed to download $archive"; exit 1; }
+		$FETCH https://downloads.devkitpro.org/$archive || { echo "Error: Failed to download $archive"; exit 1; }
 	fi
 done
 
@@ -231,9 +261,9 @@ mkdir -p $BUILDDIR
 cd $BUILDDIR
 
 extract_and_patch binutils $BINUTILS_VER bz2
-extract_and_patch gcc $GCC_VER bz2
+extract_and_patch gcc $GCC_VER xz
 extract_and_patch newlib $NEWLIB_VER gz
-extract_and_patch gdb $GDB_VER bz2
+extract_and_patch gdb $GDB_VER xz
 
 if [ $VERSION -eq 2 ]; then
 	extract_and_patch binutils $MN_BINUTILS_VER bz2
@@ -261,19 +291,17 @@ done
 # Build and install devkit components
 #---------------------------------------------------------------------------------
 if [ -f $scriptdir/build-gcc.sh ]; then . $scriptdir/build-gcc.sh || { echo "Error building toolchain"; exit 1; }; cd $BUILDSCRIPTDIR; fi
-if [ -f $scriptdir/build-tools.sh ]; then . $scriptdir/build-tools.sh || { echo "Error building tools"; exit 1; }; cd $BUILDSCRIPTDIR; fi
-if [ -f $scriptdir/build-crtls.sh ]; then . $scriptdir/build-crtls.sh || { echo "Error building crtls"; exit 1; }; cd $BUILDSCRIPTDIR; fi
 
-if [ ! -z $CROSSBUILD ]; then
+if [ "$BUILD_DKPRO_SKIP_TOOLS" != "1" ] && [ -f $scriptdir/build-tools.sh ]; then
-	if [ $VERSION -ne 3 ]; then
+ . $scriptdir/build-tools.sh || { echo "Error building tools"; exit 1; }; cd $BUILDSCRIPTDIR;
-		cp -v $CROSSBINPATH/FreeImage.dll $prefix/bin
+fi
-	fi
+
-	if [ $VERSION -eq 1 ]; then
+if [ "$BUILD_DKPRO_SKIP_LIBRARIES" != "1" ] && [ -f $scriptdir/build-libs.sh ]; then
-		cp -v $CROSSBINPATH/libusb-1.0.dll $prefix/bin
+  . $scriptdir/build-libs.sh || { echo "Error building libraries"; exit 1; }; cd $BUILDSCRIPTDIR;
-	fi
+fi
-	cp -v	$CROSSLIBPATH/libstdc++-6.dll \
+
-		$CROSSLIBPATH/libgcc_s_sjlj-1.dll \
+if [ ! -z $CROSSBUILD ] && grep -q "mingw" <<<"$CROSSBUILD" ; then
-		$prefix/bin
+	cp -v	$CROSSBINPATH//libwinpthread-1.dll $prefix/bin
 fi
 
 echo "stripping installed binaries"
@@ -301,5 +329,13 @@ fi
 
 
 echo
-echo "note: Add the following to your environment;  DEVKITPRO=$TOOLPATH $toolchain=$TOOLPATH/$package"
+echo "note: Add the following to your environment;"
+echo
+echo "  DEVKITPRO=$TOOLPATH"
+if [ "$toolchain" != "DEVKITA64" ]; then
+echo "  $toolchain=$TOOLPATH/$package"
+fi
+echo
+echo "add $TOOLPATH/tools/bin to your PATH"
+echo
 echo

config.sh.sample

@@ -9,7 +9,7 @@
 #   0: User selects manually
 #   1: devkitARM
 #   2: devkitPPC
-#   3: devkitPSP
+#   3: devkitA64
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_PACKAGE=0
 
@@ -22,7 +22,7 @@ BUILD_DKPRO_PACKAGE=0
 #---------------------------------------------------------------------------------
 # Path to previously downloaded source packages, comment if not specified
 #---------------------------------------------------------------------------------
-#BUILD_DKPRO_SRCDIR=/d/projects/archives
+#BUILD_DKPRO_SRCDIR=~/projects/archives
 
 #---------------------------------------------------------------------------------
 # MAKEFLAGS for building - use number of processors for jobs
@@ -31,6 +31,16 @@ BUILD_DKPRO_PACKAGE=0
 #export MAKEFLAGS="$MAKEFLAGS -j${numcores}"
 
 #---------------------------------------------------------------------------------
+# Uncomment to skip building of tools
+#---------------------------------------------------------------------------------
+#BUILD_DKPRO_SKIP_TOOLS=1
+
+#---------------------------------------------------------------------------------
+# Uncomment to skip building of libraries
+#---------------------------------------------------------------------------------
+#BUILD_DKPRO_SKIP_LIBRARIES=1
+
+
 # Automated script execution
 #---------------------------------------------------------------------------------
 #  0: Ask to delete build folders & patched sources
@@ -38,3 +48,8 @@ BUILD_DKPRO_PACKAGE=0
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_AUTOMATED=0
 
+#---------------------------------------------------------------------------------
+# set OSX SDK path if needed
+#---------------------------------------------------------------------------------
+#export OSXSDKPATH=/Library/Developer/CommandLineTools/SDKs/MacOSX10.12.sdk
+

cross-build-i686-w64-mingw32.sh

@@ -3,5 +3,3 @@ export CROSSBUILD=i686-w64-mingw32
 export CROSSLIBPATH=/opt/mingw32/mingw/lib
 export CROSSBINPATH=/opt/mingw32/mingw/bin
 export PATH=/opt/mingw32/bin:$PATH
-export PKG_CONFIG_PATH=
-export PKG_CONFIG_LIBDIR=$CROSSLIBPATH/pkgconfig

cross-build-x86_64-apple-darwin15.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+export CPPFLAGS=-I/opt/osx/x86_64-apple-darwin15/include
+export LDFLAGS=-L/opt/osx/x86_64-apple-darwin15/lib
+
+export OSXCROSS_PKG_CONFIG_USE_NATIVE_VARIABLES=1
+
+export CC=x86_64-apple-darwin15-clang
+export CXX=x86_64-apple-darwin15-clang++
+
+export CROSSBUILD=x86_64-apple-darwin15
+export CROSSPATH=/opt/osx/x86_64-apple-darwin15
+export CROSSLIBPATH=$CROSSPATH/lib
+export CROSSBINPATH=$CROSSPATH/bin
+export PATH=/opt/osx/bin:$PATH
+export PKG_CONFIG_PATH=
+export PKG_CONFIG_LIBDIR=$CROSSLIBPATH/pkgconfig
+

cross-build-x86_64-w64-mingw32.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 export CROSSBUILD=x86_64-w64-mingw32
-export CROSSLIBPATH=/opt/x86_64-mingw-w64/mingw/lib
+export CROSSPATH=/opt/mingw64/mingw
-export CROSSBINPATH=/opt/x86_64-mingw-w64/mingw/bin
+export CROSSLIBPATH=$CROSSPATH/lib
-export PATH=/opt/x86_64-mingw-w64/bin:$PATH
+export CROSSBINPATH=$CROSSPATH/bin
-export PKG_CONFIG_PATH=$CROSSLIBPATH/pkgconfig
+export PATH=/opt/mingw64/bin:$PATH
 

dka64/patches/binutils-2.30.patch

@@ -0,0 +1,346 @@
+diff -NBaur binutils-2.30/bfd/elfnn-aarch64.c binutils-2.30-dka64/bfd/elfnn-aarch64.c
+--- binutils-2.30/bfd/elfnn-aarch64.c	2018-01-17 11:29:21.000000000 +0000
++++ binutils-2.30-dka64/bfd/elfnn-aarch64.c	2018-02-11 19:54:08.141257544 +0000
+@@ -2097,6 +2097,12 @@
+   aarch64_stub_erratum_843419_veneer,
+ };
+ 
++/* Is an undefined weak symbol resolved to 0 ? */
++#define UNDEFINED_WEAK_RESOLVED_TO_ZERO(INFO, EH)               \
++  ((EH)->root.root.type == bfd_link_hash_undefweak              \
++   && bfd_link_executable (INFO)                                \
++   && !(INFO)->dynamic_undefined_weak)
++
+ struct elf_aarch64_stub_hash_entry
+ {
+   /* Base hash table entry structure.  */
+@@ -6088,11 +6094,13 @@
+       Elf_Internal_Sym *sym;
+       asection *sec;
+       struct elf_link_hash_entry *h;
++      struct elf_aarch64_link_hash_entry *eh;
+       bfd_vma relocation;
+       bfd_reloc_status_type r;
+       arelent bfd_reloc;
+       char sym_type;
+       bfd_boolean unresolved_reloc = FALSE;
++      bfd_boolean resolved_to_zero = FALSE;
+       char *error_message = NULL;
+ 
+       r_symndx = ELFNN_R_SYM (rel->r_info);
+@@ -6226,6 +6234,10 @@
+ 					       h, &unresolved_reloc,
+ 					       save_addend, &addend, sym);
+ 
++      eh = (struct elf_aarch64_link_hash_entry *) h;
++      resolved_to_zero = (eh != NULL
++                          && UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh));
++      
+       switch (elfNN_aarch64_bfd_reloc_from_type (r_type))
+ 	{
+ 	case BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC:
+@@ -6249,7 +6261,7 @@
+ 	      need_relocs =
+ 		(!bfd_link_executable (info) || indx != 0) &&
+ 		(h == NULL
+-		 || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++		 || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 		 || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6344,7 +6356,7 @@
+ 	      need_relocs =
+ 		(!bfd_link_executable (info) || indx != 0) &&
+ 		(h == NULL
+-		 || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++		 || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 		 || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6393,7 +6405,7 @@
+ 	      bfd_vma off = symbol_tlsdesc_got_offset (input_bfd, h, r_symndx);
+ 
+ 	      need_relocs = (h == NULL
+-			     || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++			     || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 			     || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6735,6 +6747,26 @@
+   return FALSE;
+ }
+ 
++/* Remove undefined weak symbol from the dynamic symbol table if it
++   is resolved to 0.   */
++
++extern bfd_boolean
++elfNN_aarch64_elf_fixup_symbol (struct bfd_link_info *, struct elf_link_hash_entry *);
++
++bfd_boolean
++elfNN_aarch64_elf_fixup_symbol (struct bfd_link_info *info,
++                             struct elf_link_hash_entry *h)
++{
++  if (h->dynindx != -1
++      && UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, elf_aarch64_hash_entry (h)))
++    {
++      h->dynindx = -1;
++      _bfd_elf_strtab_delref (elf_hash_table (info)->dynstr,
++                              h->dynstr_index);
++    }
++  return TRUE;
++}
++
+ /* Adjust a symbol defined by a dynamic object and referenced by a
+    regular object.  The current definition is in some section of the
+    dynamic object, but we're not including those sections.  We have to
+@@ -7928,6 +7960,7 @@
+   struct elf_aarch64_link_hash_table *htab;
+   struct elf_aarch64_link_hash_entry *eh;
+   struct elf_dyn_relocs *p;
++  bfd_boolean resolved_to_zero;
+ 
+   /* An example of a bfd_link_hash_indirect symbol is versioned
+      symbol. For example: __gxx_personality_v0(bfd_link_hash_indirect)
+@@ -7947,6 +7980,10 @@
+   info = (struct bfd_link_info *) inf;
+   htab = elf_aarch64_hash_table (info);
+ 
++  eh = (struct elf_aarch64_link_hash_entry *) h;
++  eh->tlsdesc_got_jump_table_offset = (bfd_vma) - 1;
++  resolved_to_zero = UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh);
++
+   /* Since STT_GNU_IFUNC symbol must go through PLT, we handle it
+      here if it is defined and referenced in a non-shared object.  */
+   if (h->type == STT_GNU_IFUNC
+@@ -7956,7 +7993,7 @@
+     {
+       /* Make sure this symbol is output as a dynamic symbol.
+ 	 Undefined weak syms won't yet be marked as dynamic.  */
+-      if (h->dynindx == -1 && !h->forced_local
++      if (h->dynindx == -1 && !h->forced_local && !resolved_to_zero
+ 	  && h->root.type == bfd_link_hash_undefweak)
+ 	{
+ 	  if (!bfd_elf_link_record_dynamic_symbol (info, h))
+@@ -7990,6 +8027,11 @@
+ 	     of relaxing into these from the large model PLT entries.  */
+ 	  s->size += PLT_SMALL_ENTRY_SIZE;
+ 
++          /* There should be no PLT relocations against resolved undefined
++             weak symbols in the executable.  */
++          if (!resolved_to_zero)
++            {
++
+ 	  /* We also need to make an entry in the .got.plt section, which
+ 	     will be placed in the .got section by the linker script.  */
+ 	  htab->root.sgotplt->size += GOT_ENTRY_SIZE;
+@@ -8012,6 +8054,7 @@
+ 
+ 	  htab->root.srelplt->reloc_count++;
+ 	}
++	}
+       else
+ 	{
+ 	  h->plt.offset = (bfd_vma) - 1;
+@@ -8024,9 +8067,6 @@
+       h->needs_plt = 0;
+     }
+ 
+-  eh = (struct elf_aarch64_link_hash_entry *) h;
+-  eh->tlsdesc_got_jump_table_offset = (bfd_vma) - 1;
+-
+   if (h->got.refcount > 0)
+     {
+       bfd_boolean dyn;
+@@ -8038,7 +8078,7 @@
+ 
+       /* Make sure this symbol is output as a dynamic symbol.
+ 	 Undefined weak syms won't yet be marked as dynamic.  */
+-      if (dyn && h->dynindx == -1 && !h->forced_local
++      if (dyn && h->dynindx == -1 && !h->forced_local && !resolved_to_zero
+ 	  && h->root.type == bfd_link_hash_undefweak)
+ 	{
+ 	  if (!bfd_elf_link_record_dynamic_symbol (info, h))
+@@ -8052,7 +8092,7 @@
+ 	{
+ 	  h->got.offset = htab->root.sgot->size;
+ 	  htab->root.sgot->size += GOT_ENTRY_SIZE;
+-	  if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++	  if (((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 	       || h->root.type != bfd_link_hash_undefweak)
+ 	      && (bfd_link_pic (info)
+ 		  || WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, 0, h))
+@@ -8088,7 +8128,7 @@
+ 	    }
+ 
+ 	  indx = h && h->dynindx != -1 ? h->dynindx : 0;
+-	  if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++	  if (((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 	       || h->root.type != bfd_link_hash_undefweak)
+ 	      && (!bfd_link_executable (info)
+ 		  || indx != 0
+@@ -8154,7 +8194,7 @@
+ 	 visibility.  */
+       if (eh->dyn_relocs != NULL && h->root.type == bfd_link_hash_undefweak)
+ 	{
+-	  if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT
++	  if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT || resolved_to_zero
+ 	      || UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
+ 	    eh->dyn_relocs = NULL;
+ 
+@@ -8174,7 +8214,9 @@
+ 	 symbols which turn out to need copy relocs or are not
+ 	 dynamic.  */
+ 
+-      if (!h->non_got_ref
++      if (!(h->non_got_ref
++           || (h->root.type == bfd_link_hash_undefweak
++               && !resolved_to_zero))
+ 	  && ((h->def_dynamic
+ 	       && !h->def_regular)
+ 	      || (htab->root.dynamic_sections_created
+@@ -8185,6 +8227,7 @@
+ 	     Undefined weak syms won't yet be marked as dynamic.  */
+ 	  if (h->dynindx == -1
+ 	      && !h->forced_local
++	      && !resolved_to_zero
+ 	      && h->root.type == bfd_link_hash_undefweak
+ 	      && !bfd_elf_link_record_dynamic_symbol (info, h))
+ 	    return FALSE;
+@@ -8805,8 +8848,17 @@
+ 				     Elf_Internal_Sym *sym)
+ {
+   struct elf_aarch64_link_hash_table *htab;
++  struct elf_aarch64_link_hash_entry *eh;
++  bfd_boolean local_undefweak;
+   htab = elf_aarch64_hash_table (info);
+ 
++  eh = (struct elf_aarch64_link_hash_entry *) h;
++
++  /* We keep PLT/GOT entries without dynamic PLT/GOT relocations for
++     resolved undefined weak symbols in executable so that their
++     references have value 0 at run-time.  */
++  local_undefweak = UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh);
++
+   if (h->plt.offset != (bfd_vma) - 1)
+     {
+       asection *plt, *gotplt, *relplt;
+@@ -8841,7 +8893,7 @@
+ 	return FALSE;
+ 
+       elfNN_aarch64_create_small_pltn_entry (h, htab, output_bfd, info);
+-      if (!h->def_regular)
++      if (!local_undefweak && !h->def_regular)
+ 	{
+ 	  /* Mark the symbol as undefined, rather than as defined in
+ 	     the .plt section.  */
+@@ -8860,10 +8912,11 @@
+     }
+ 
+   if (h->got.offset != (bfd_vma) - 1
+-      && elf_aarch64_hash_entry (h)->got_type == GOT_NORMAL
++      && elf_aarch64_hash_entry (h)->got_type == GOT_NORMAL 
+       /* Undefined weak symbol in static PIE resolves to 0 without
+ 	 any dynamic relocations.  */
+-      && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
++      && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h)
++      && !local_undefweak)
+     {
+       Elf_Internal_Rela rela;
+       bfd_byte *loc;
+@@ -9357,6 +9410,9 @@
+ #define elf_backend_init_index_section		\
+   _bfd_elf_init_2_index_sections
+ 
++#define elf_backend_fixup_symbol		\
++  elfNN_aarch64_elf_fixup_symbol
++
+ #define elf_backend_finish_dynamic_sections	\
+   elfNN_aarch64_finish_dynamic_sections
+ 
+diff -NBaur binutils-2.30/ld/emulparams/aarch64elf32.sh binutils-2.30-dka64/ld/emulparams/aarch64elf32.sh
+--- binutils-2.30/ld/emulparams/aarch64elf32.sh	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-dka64/ld/emulparams/aarch64elf32.sh	2018-02-11 19:48:08.997273556 +0000
+@@ -1,3 +1,5 @@
++. ${srcdir}/emulparams/dynamic_undefined_weak.sh
++
+ ARCH="aarch64:ilp32"
+ MACHINE=
+ NOP=0
+diff -NBaur binutils-2.30/ld/emulparams/aarch64elf.sh binutils-2.30-dka64/ld/emulparams/aarch64elf.sh
+--- binutils-2.30/ld/emulparams/aarch64elf.sh	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-dka64/ld/emulparams/aarch64elf.sh	2018-02-11 19:48:09.009273555 +0000
+@@ -1,3 +1,5 @@
++. ${srcdir}/emulparams/dynamic_undefined_weak.sh
++
+ ARCH=aarch64
+ MACHINE=
+ NOP=0
+diff -NBaur binutils-2.30/ld/emultempl/aarch64elf.em binutils-2.30-dka64/ld/emultempl/aarch64elf.em
+--- binutils-2.30/ld/emultempl/aarch64elf.em	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-dka64/ld/emultempl/aarch64elf.em	2018-02-11 19:48:09.009273555 +0000
+@@ -378,7 +378,7 @@
+   { "no-apply-dynamic-relocs", no_argument, NULL, OPTION_NO_APPLY_DYNAMIC_RELOCS},
+ '
+ 
+-PARSE_AND_LIST_OPTIONS='
++PARSE_AND_LIST_OPTIONS=${PARSE_AND_LIST_OPTIONS}'
+   fprintf (file, _("  --no-enum-size-warning      Don'\''t warn about objects with incompatible\n"
+ 		   "                                enum sizes\n"));
+   fprintf (file, _("  --no-wchar-size-warning     Don'\''t warn about objects with incompatible"
+diff -NBaur binutils-2.30/ld/Makefile.am binutils-2.30-dka64/ld/Makefile.am
+--- binutils-2.30/ld/Makefile.am	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-dka64/ld/Makefile.am	2018-02-11 19:48:09.021273555 +0000
+@@ -1654,19 +1654,23 @@
+   $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf.c: $(srcdir)/emulparams/aarch64elf.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32.c: $(srcdir)/emulparams/aarch64elf32.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elfb.c: $(srcdir)/emulparams/aarch64elfb.sh $(srcdir)/emulparams/aarch64elf.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32b.c: $(srcdir)/emulparams/aarch64elf32b.sh $(srcdir)/emulparams/aarch64elf32.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64cloudabi.c: $(srcdir)/emulparams/aarch64cloudabi.sh \
+diff -NBaur binutils-2.30/ld/Makefile.in binutils-2.30-dka64/ld/Makefile.in
+--- binutils-2.30/ld/Makefile.in	2018-01-27 15:03:10.000000000 +0000
++++ binutils-2.30-dka64/ld/Makefile.in	2018-02-11 19:48:09.037273554 +0000
+@@ -3219,18 +3219,22 @@
+ 
+ eaarch64elf.c: $(srcdir)/emulparams/aarch64elf.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32.c: $(srcdir)/emulparams/aarch64elf32.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elfb.c: $(srcdir)/emulparams/aarch64elfb.sh $(srcdir)/emulparams/aarch64elf.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32b.c: $(srcdir)/emulparams/aarch64elf32b.sh $(srcdir)/emulparams/aarch64elf32.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64cloudabi.c: $(srcdir)/emulparams/aarch64cloudabi.sh \

dka64/patches/gcc-8.1.0.patch

@@ -0,0 +1,190 @@
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64.c gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.c
+--- gcc-8.1.0/gcc/config/aarch64/aarch64.c	2018-03-15 08:55:04.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.c	2018-05-08 11:09:01.247467815 +0100
+@@ -11963,8 +11963,24 @@
+       || !register_operand (target, Pmode))
+     target = gen_reg_rtx (Pmode);
+ 
+-  /* Can return in any reg.  */
+-  emit_insn (gen_aarch64_load_tp_hard (target));
++  if (TARGET_HARD_TP)
++    {
++      /* Can return in any reg.  */
++      emit_insn (gen_aarch64_load_tp_hard (target));
++    }
++  else
++    {
++      /* Always returned in r0.  Immediately copy the result into a pseudo,
++	 otherwise other uses of r0 (e.g. setting up function arguments) may
++	 clobber the value.  */
++
++      rtx tmp;
++
++      emit_insn (gen_aarch64_load_tp_soft ());
++
++      tmp = gen_rtx_REG (DImode, R0_REGNUM);
++      emit_move_insn (target, tmp);
++    }
+   return target;
+ }
+ 
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64-elf-raw.h gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64-elf-raw.h
+--- gcc-8.1.0/gcc/config/aarch64/aarch64-elf-raw.h	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64-elf-raw.h	2018-05-08 11:09:01.247467815 +0100
+@@ -22,6 +22,7 @@
+ #ifndef GCC_AARCH64_ELF_RAW_H
+ #define GCC_AARCH64_ELF_RAW_H
+ 
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
+ #define STARTFILE_SPEC " crti%O%s crtbegin%O%s crt0%O%s"
+ #define ENDFILE_SPEC \
+   " crtend%O%s crtn%O%s " \
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64.h gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.h
+--- gcc-8.1.0/gcc/config/aarch64/aarch64.h	2018-02-21 14:05:45.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.h	2018-05-08 11:09:01.255467862 +0100
+@@ -957,6 +957,10 @@
+ /* Check TLS Descriptors mechanism is selected.  */
+ #define TARGET_TLS_DESC (aarch64_tls_dialect == TLS_DESCRIPTORS)
+ 
++/* Check selected thread pointer access sequence to use.  */
++#define TARGET_HARD_TP (target_thread_pointer == TP_HARD)
++#define TARGET_SOFT_TP (target_thread_pointer == TP_SOFT)
++
+ extern enum aarch64_code_model aarch64_cmodel;
+ 
+ /* When using the tiny addressing model conditional and unconditional branches
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64.md gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.md
+--- gcc-8.1.0/gcc/config/aarch64/aarch64.md	2018-04-24 17:58:49.000000000 +0100
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.md	2018-05-08 11:09:01.255467862 +0100
+@@ -5693,11 +5693,22 @@
+ (define_insn "aarch64_load_tp_hard"
+   [(set (match_operand:DI 0 "register_operand" "=r")
+ 	(unspec:DI [(const_int 0)] UNSPEC_TLS))]
+-  ""
+-  "mrs\\t%0, tpidr_el0"
++  "TARGET_HARD_TP"
++  "mrs\\t%0, tpidr_el0\\t// aarch64_load_tp_hard"
+   [(set_attr "type" "mrs")]
+ )
+ 
++(define_insn "aarch64_load_tp_soft"
++  [(set (reg:DI 0) (unspec:DI [(const_int 0)] UNSPEC_TLS))
++   (clobber (reg:DI IP0_REGNUM))
++   (clobber (reg:DI IP1_REGNUM))
++   (clobber (reg:DI LR_REGNUM))
++   (clobber (reg:CC CC_REGNUM))]
++  "TARGET_SOFT_TP"
++  "bl\\t__aarch64_read_tp\\t// aarch64_load_tp_soft"
++  [(set_attr "type" "branch")]
++)
++
+ ;; The TLS ABI specifically requires that the compiler does not schedule
+ ;; instructions in the TLS stubs, in order to enable linker relaxation.
+ ;; Therefore we treat the stubs as an atomic sequence.
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64.opt gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.opt
+--- gcc-8.1.0/gcc/config/aarch64/aarch64.opt	2018-01-13 17:50:35.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.opt	2018-05-08 11:09:01.255467862 +0100
+@@ -115,6 +115,20 @@
+ EnumValue
+ Enum(aarch64_tls_size) String(48) Value(48)
+ 
++mtp=
++Target RejectNegative Joined Enum(aarch64_tp_type) Var(target_thread_pointer) Init(TP_HARD)
++Specify how to access the thread pointer.
++
++Enum
++Name(aarch64_tp_type) Type(enum aarch64_tp_type)
++Valid arguments to -mtp=:
++
++EnumValue
++Enum(aarch64_tp_type) String(hard) Value(TP_HARD)
++
++EnumValue
++Enum(aarch64_tp_type) String(soft) Value(TP_SOFT)
++
+ march=
+ Target RejectNegative ToLower Joined Var(aarch64_arch_string)
+ -march=ARCH	Use features of architecture ARCH.
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64-opts.h gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64-opts.h
+--- gcc-8.1.0/gcc/config/aarch64/aarch64-opts.h	2018-01-13 17:50:35.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64-opts.h	2018-05-08 11:09:01.255467862 +0100
+@@ -48,6 +48,12 @@
+   TLS_DESCRIPTORS
+ };
+ 
++/* Which thread pointer access sequence to use.  */
++enum aarch64_tp_type {
++  TP_HARD,
++  TP_SOFT
++};
++
+ /* The code model defines the address generation strategy.
+    Most have a PIC and non-PIC variant.  */
+ enum aarch64_code_model {
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/t-aarch64 gcc-8.1.0-aarch64/gcc/config/aarch64/t-aarch64
+--- gcc-8.1.0/gcc/config/aarch64/t-aarch64	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/t-aarch64	2018-05-08 11:09:01.255467862 +0100
+@@ -68,5 +68,7 @@
+ 		$(srcdir)/config/aarch64/cortex-a57-fma-steering.c
+ 
+ comma=,
+-MULTILIB_OPTIONS    = $(subst $(comma),/, $(patsubst %, mabi=%, $(subst $(comma),$(comma)mabi=,$(TM_MULTILIB_CONFIG))))
+-MULTILIB_DIRNAMES   = $(subst $(comma), ,$(TM_MULTILIB_CONFIG))
++MULTILIB_OPTIONS    = mcmodel=large fPIC
++MULTILIB_DIRNAMES   = large pic
++MULTILIB_REQUIRED   = mcmodel=large fPIC
++MULTILIB_MATCHES    = fPIC=fpic fPIC=fpie fPIC=fPIE
+diff -NBaur gcc-8.1.0/gcc/gcc.c gcc-8.1.0-aarch64/gcc/gcc.c
+--- gcc-8.1.0/gcc/gcc.c	2018-02-09 06:44:06.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/gcc.c	2018-05-08 11:09:01.259467885 +0100
+@@ -786,6 +786,11 @@
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1081,6 +1086,7 @@
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1577,6 +1583,7 @@
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff -NBaur gcc-8.1.0/libgcc/crtstuff.c gcc-8.1.0-aarch64/libgcc/crtstuff.c
+--- gcc-8.1.0/libgcc/crtstuff.c	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-aarch64/libgcc/crtstuff.c	2018-05-08 11:09:01.259467885 +0100
+@@ -47,6 +47,7 @@
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
++#define USED_FOR_TARGET
+ 
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,
+diff -NBaur gcc-8.1.0/libgcc/Makefile.in gcc-8.1.0-aarch64/libgcc/Makefile.in
+--- gcc-8.1.0/libgcc/Makefile.in	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-aarch64/libgcc/Makefile.in	2018-05-08 11:09:01.259467885 +0100
+@@ -847,7 +847,7 @@
+ # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
+ # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
+ 
+-c_flags := -fexceptions
++c_flags := -fno-exceptions
+ 
+ ifeq ($(enable_shared),yes)
+ 

dka64/rules/base_rules

@@ -0,0 +1,40 @@
+include $(DEVKITPRO)/devkitA64/base_tools
+
+#---------------------------------------------------------------------------------
+%.a:
+#---------------------------------------------------------------------------------
+	@echo $(notdir $@)
+	@rm -f $@
+	$(AR) -rc $@ $^
+
+
+#---------------------------------------------------------------------------------
+%.o: %.cpp
+	@echo $(notdir $<)
+	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.c
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.s
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.S
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+# canned command sequence for binary data
+#---------------------------------------------------------------------------------
+define bin2o
+	bin2s $< | $(AS) -o $(@)
+	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo $(<F) | tr . _)`.h
+	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo $(<F) | tr . _)`.h
+	echo "extern const u32" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo $(<F) | tr . _)`.h
+endef
+

dka64/rules/base_tools

@@ -0,0 +1,41 @@
+#---------------------------------------------------------------------------------
+# make sure we have bash on OSX
+#---------------------------------------------------------------------------------
+UNAME_S	:=	$(shell uname -s)
+UNAME_R	:=	$(shell uname -r)
+
+ifneq (,$(findstring Darwin,$(UNAME_S)))
+	export SHELL=/bin/bash
+endif
+
+#---------------------------------------------------------------------------------
+# path to tools
+#---------------------------------------------------------------------------------
+DEVKITPATH=$(shell echo "$(DEVKITPRO)" | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+export PATH	:=	$(DEVKITPATH)/tools/bin:$(DEVKITPATH)/devkitA64/bin:$(PATH)
+
+#---------------------------------------------------------------------------------
+# add portlibs path
+#---------------------------------------------------------------------------------
+export PORTLIBS_PATH	:=	$(DEVKITPATH)/portlibs
+
+
+#---------------------------------------------------------------------------------
+# the prefix on the compiler executables
+#---------------------------------------------------------------------------------
+PREFIX		:=	aarch64-none-elf-
+
+export CC	:=	$(PREFIX)gcc
+export CXX	:=	$(PREFIX)g++
+export AS	:=	$(PREFIX)as
+export AR	:=	$(PREFIX)gcc-ar
+export OBJCOPY	:=	$(PREFIX)objcopy
+export STRIP	:=	$(PREFIX)strip
+export NM	:=	$(PREFIX)gcc-nm
+export RANLIB	:=	$(PREFIX)gcc-ranlib
+
+ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
+
+ifneq (,$(ISVC))
+	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
+endif

dka64/scripts/build-gcc.sh

@@ -0,0 +1,189 @@
+#!/bin/sh
+#---------------------------------------------------------------------------------
+
+#---------------------------------------------------------------------------------
+# build and install binutils
+#---------------------------------------------------------------------------------
+
+mkdir -p $target/binutils
+cd $target/binutils
+
+if [ ! -f configured-binutils ]
+then
+	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+        --prefix=$prefix --target=$target --disable-nls --disable-werror \
+	--enable-lto --enable-plugins --enable-poison-system-directories \
+	$CROSS_PARAMS \
+        || { echo "Error configuring binutils"; exit 1; }
+	touch configured-binutils
+fi
+
+if [ ! -f built-binutils ]
+then
+  $MAKE || { echo "Error building binutils"; exit 1; }
+  touch built-binutils
+fi
+
+if [ ! -f installed-binutils ]
+then
+  $MAKE install || { echo "Error installing binutils"; exit 1; }
+  touch installed-binutils
+fi
+cd $BUILDDIR
+
+#---------------------------------------------------------------------------------
+# build and install just the c compiler
+#---------------------------------------------------------------------------------
+mkdir -p $target/gcc
+cd $target/gcc
+
+if [ ! -f configured-gcc ]
+then
+	CFLAGS="$cflags" \
+	CXXFLAGS="$cflags" \
+	LDFLAGS="$ldflags" \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	LDFLAGS_FOR_TARGET="" \
+	../../gcc-$GCC_VER/configure \
+		--enable-languages=c,c++,objc,lto \
+		--with-gnu-as --with-gnu-ld --with-gcc \
+		--with-march=armv8\
+		--enable-cxx-flags='-ffunction-sections' \
+		--disable-libstdcxx-verbose \
+		--enable-poison-system-directories \
+		--enable-interwork --enable-multilib \
+		--enable-threads --disable-win32-registry --disable-nls --disable-debug\
+		--disable-libmudflap --disable-libssp --disable-libgomp \
+		--disable-libstdcxx-pch \
+		--enable-libstdcxx-time \
+		--enable-libstdcxx-filesystem-ts \
+		--target=$target \
+		--with-newlib \
+		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
+		--prefix=$prefix \
+		--enable-lto $plugin_ld\
+		--with-system-zlib \
+		--with-bugurl="https://github.com/devkitPro/buildscripts/issues" --with-pkgversion="devkitA64 release 10" \
+		$CROSS_PARAMS \
+		$CROSS_GCC_PARAMS \
+		|| { echo "Error configuring gcc"; exit 1; }
+	touch configured-gcc
+fi
+
+if [ ! -f built-gcc ]
+then
+	$MAKE all-gcc || { echo "Error building gcc stage1"; exit 1; }
+	touch built-gcc
+fi
+
+if [ ! -f installed-gcc ]
+then
+	$MAKE install-gcc || { echo "Error installing gcc"; exit 1; }
+	touch installed-gcc
+fi
+
+
+unset CFLAGS
+cd $BUILDDIR
+
+OLD_CC=$CC
+OLDCXX=$CXX
+unset CC
+unset CXX
+
+#---------------------------------------------------------------------------------
+# build and install newlib
+#---------------------------------------------------------------------------------
+mkdir -p $target/newlib
+cd $target/newlib
+
+if [ ! -f configured-newlib ]
+then
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	../../newlib-$NEWLIB_VER/configure \
+	--disable-newlib-supplied-syscalls \
+	--enable-newlib-mb \
+	--disable-newlib-wide-orient \
+	--target=$target \
+	--prefix=$prefix \
+	|| { echo "Error configuring newlib"; exit 1; }
+	touch configured-newlib
+fi
+
+if [ ! -f built-newlib ]
+then
+	$MAKE || { echo "Error building newlib"; exit 1; }
+	touch built-newlib
+fi
+
+
+if [ ! -f installed-newlib ]
+then
+	$MAKE install -j1 || { echo "Error installing newlib"; exit 1; }
+	touch installed-newlib
+fi
+
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
+#---------------------------------------------------------------------------------
+# build and install the final compiler
+#---------------------------------------------------------------------------------
+
+cd $BUILDDIR
+
+cd $target/gcc
+
+if [ ! -f built-stage2 ]
+then
+	$MAKE all || { echo "Error building gcc stage2"; exit 1; }
+	touch built-stage2
+fi
+
+if [ ! -f installed-stage2 ]
+then
+	$MAKE install || { echo "Error installing gcc stage2"; exit 1; }
+	touch installed-stage2
+fi
+
+rm -fr $prefix/$target/sys-include
+
+cd $BUILDDIR
+
+#---------------------------------------------------------------------------------
+# build and install the debugger
+#---------------------------------------------------------------------------------
+mkdir -p $target/gdb
+cd $target/gdb
+
+PLATFORM=`uname -s`
+
+if [ ! -f configured-gdb ]
+then
+	CFLAGS="$cflags" \
+	CXXFLAGS="$cflags" \
+	LDFLAGS="$ldflags" \
+	../../gdb-$GDB_VER/configure \
+	--disable-nls --prefix=$prefix --target=$target --disable-werror \
+	$CROSS_PARAMS \
+	|| { echo "Error configuring gdb"; exit 1; }
+	touch configured-gdb
+fi
+
+if [ ! -f built-gdb ]
+then
+	$MAKE || { echo "Error building gdb"; exit 1; }
+	touch built-gdb
+fi
+
+if [ ! -f installed-gdb ]
+then
+	$MAKE install || { echo "Error installing gdb"; exit 1; }
+	touch installed-gdb
+fi
+
+#---------------------------------------------------------------------------------
+# copy base rulesets
+#---------------------------------------------------------------------------------
+cp -v $BUILDSCRIPTDIR/dka64/rules/* $prefix

dka64/scripts/build-libs.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+export DEVKITPRO=$TOOLPATH
+
+cd $BUILDDIR/libnx-$LIBNX_VER
+$MAKE || { echo "error building libnx"; exit 1; }
+$MAKE install || { echo "error installing libnx"; exit 1; }

dka64/scripts/build-tools.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+cd $BUILDDIR
+
+for archive in $hostarchives
+do
+	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
+	cd $BUILDDIR/$dir
+	if [ ! -f configured ]; then
+		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$toolsprefix $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
+		touch configured
+	fi
+	if [ ! -f built ]; then
+		$MAKE || { echo "error building $dir"; exit 1; }
+		touch built
+	fi
+	if [ ! -f installed ]; then
+		$MAKE install || { echo "error installing $dir"; exit 1; }
+		touch installed
+	fi
+done

dkarm-eabi/crtls/3dsx.ld

@@ -40,7 +40,9 @@ SECTIONS
 
 	/* =========== RODATA section =========== */
 
-	.rodata ALIGN(0x1000) :
+	. = ALIGN(0x1000);
+
+	.rodata :
 	{
 		*(.rodata)
 		*(.roda)
@@ -58,7 +60,9 @@ SECTIONS
 
 	/* =========== DATA section =========== */
 
-	.data ALIGN(0x1000) :
+	. = ALIGN(0x1000);
+
+	.data :
 	{
 		*(.data)
 		*(.data.*)

dkarm-eabi/crtls/ds_arm7.ld

@@ -45,6 +45,7 @@ SECTIONS
 		*.twl*(.data)
 		*.twl*(.data.*)
 		*.twl*(.gnu.linkonce.d*)
+		. = ALIGN(4);
 		__arm7i_end__ = .;
 	} >twl_iwram AT>twl_ewram :arm7i
 
@@ -56,6 +57,7 @@ SECTIONS
 		*.twl.*(.gnu.linkonce.b*)
 		*.twl.*(.bss*)
 		*.twl.*(COMMON)
+		. = ALIGN(4);
 		__twl_bss_end__ = .;
 	} >twl_iwram :NONE
 

dkarm-eabi/crtls/ds_arm7_crt0.s

@@ -51,12 +51,12 @@ _start:
 	sub	r1, r1, r0
 	bl	ClearMem
 
-#ifndef VRAM
 	cmp	r10, #1
 	bne	NotTWL
 	ldr	r1, =__dsimode		@ set DSi mode flag
 	strb	r10, [r1]
 
+#ifndef VRAM
 	ldr	r1, =0x02ffe1d8		@ Get ARM7i LMA from header
 	ldr	r1, [r1]
 	ldr	r2, =__arm7i_start__

dkarm-eabi/crtls/ds_arm7_vram.ld

@@ -40,7 +40,7 @@ SECTIONS
 
 	.text :   /* ALIGN (4): */
 	{
-		*(.text .stub .text.* .gnu.linkonce.t.*)
+		*(.text .stub .text.* .twl .gnu.linkonce.t.*)
 		KEEP (*(.text.*personality*))
 		/* .gnu.warning sections are handled specially by elf32.em.  */
 		*(.gnu.warning)
@@ -139,13 +139,14 @@ SECTIONS
 	__arm7_end__ = .;
 
 
-	.bss ALIGN(4) :
+	.bss ALIGN(4) (NOLOAD) :
 	{
 		__bss_start = ABSOLUTE(.);
 		__bss_start__ = ABSOLUTE(.);
 		*(.dynbss)
 		*(.gnu.linkonce.b*)
 		*(.bss*)
+		*(.twl_bss)
 		*(COMMON)
 		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
 		__bss_end__ = ABSOLUTE(.);

dkarm-eabi/crtls/ds_arm9.ld

@@ -186,8 +186,7 @@ SECTIONS
 	{
 		__vectors_lma = LOADADDR(.vectors);
 		__vectors_start = ABSOLUTE(.);
-		*(.vectors)
+		KEEP(*(.vectors .vectors.*))
-		*.vectors*(.text .stub .text.*)
 		. = ALIGN(4);
 		__vectors_end = ABSOLUTE(.);
 	} >vectors AT>ewram :vectors = 0xff

dkarm-eabi/patches/gcc-6.3.0.patch

@@ -1,120 +0,0 @@
-diff -NBaur gcc-6.2.0/gcc/config/arm/t-arm-elf gcc-6.2.0-arm/gcc/config/arm/t-arm-elf
---- gcc-6.2.0/gcc/config/arm/t-arm-elf	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.2.0-arm/gcc/config/arm/t-arm-elf	2016-12-10 12:16:20.076000000 +0000
-@@ -16,11 +16,19 @@
- # along with GCC; see the file COPYING3.  If not see
- # <http://www.gnu.org/licenses/>.
- 
--MULTILIB_OPTIONS     = marm/mthumb
--MULTILIB_DIRNAMES    = arm thumb
-+MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k mfloat-abi=hard
-+MULTILIB_DIRNAMES    = thumb be armv6k fpu
- MULTILIB_EXCEPTIONS  = 
- MULTILIB_MATCHES     =
- 
-+MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard 
-+
-+
-+MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
-+MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
-+
-+
-+
- #MULTILIB_OPTIONS     += mcpu=fa526/mcpu=fa626/mcpu=fa606te/mcpu=fa626te/mcpu=fmp626/mcpu=fa726te
- #MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
- #MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
-@@ -38,9 +46,9 @@
- # Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
- # express that here?  Also, we really need architecture v5e or later
- # (mcrr etc).
--MULTILIB_OPTIONS       += mfloat-abi=hard
--MULTILIB_DIRNAMES      += fpu
--MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
-+#MULTILIB_OPTIONS       += mfloat-abi=hard
-+#MULTILIB_DIRNAMES      += fpu
-+#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
- 
-diff -NBaur gcc-6.2.0/gcc/config/arm/unknown-elf.h gcc-6.2.0-arm/gcc/config/arm/unknown-elf.h
---- gcc-6.2.0/gcc/config/arm/unknown-elf.h	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.2.0-arm/gcc/config/arm/unknown-elf.h	2016-09-07 08:58:29.977682360 +0100
-@@ -29,7 +29,7 @@
- #endif
- 
- /* Now we define the strings used to build the spec file.  */
--#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
-+#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
- 
- #undef  STARTFILE_SPEC
- #define STARTFILE_SPEC	\
-@@ -97,4 +97,4 @@
-    udivmoddi4, which will depend on the exception unwind routines,
-    which will depend on abort, which is defined in libc.  */ 
- #undef LINK_GCC_C_SEQUENCE_SPEC
--#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
-+#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
-diff -NBaur gcc-6.2.0/gcc/gcc.c gcc-6.2.0-arm/gcc/gcc.c
---- gcc-6.2.0/gcc/gcc.c	2016-08-15 12:19:34.000000000 +0100
-+++ gcc-6.2.0-arm/gcc/gcc.c	2016-09-07 08:58:29.981682360 +0100
-@@ -778,6 +778,11 @@
- #endif
- #endif
- 
-+#ifndef LIBGLOSS_SPEC
-+# define LIBGLOSS_SPEC "-lsysbase"
-+#endif
-+
-+
- /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
- #ifndef STARTFILE_SPEC
- #define STARTFILE_SPEC  \
-@@ -1062,6 +1067,7 @@
- static const char *lib_spec = LIB_SPEC;
- static const char *link_gomp_spec = "";
- static const char *libgcc_spec = LIBGCC_SPEC;
-+static const char *libgloss_spec = LIBGLOSS_SPEC;
- static const char *endfile_spec = ENDFILE_SPEC;
- static const char *startfile_spec = STARTFILE_SPEC;
- static const char *linker_name_spec = LINKER_NAME;
-@@ -1563,6 +1569,7 @@
-   INIT_STATIC_SPEC ("lib",			&lib_spec),
-   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
-   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
-+  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
-   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
-   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
-   INIT_STATIC_SPEC ("version",			&compiler_version),
-diff -NBaur gcc-6.2.0/libgcc/config/arm/t-bpabi gcc-6.2.0-arm/libgcc/config/arm/t-bpabi
---- gcc-6.2.0/libgcc/config/arm/t-bpabi	2012-08-17 16:06:06.000000000 +0100
-+++ gcc-6.2.0-arm/libgcc/config/arm/t-bpabi	2016-09-07 08:58:29.985682360 +0100
-@@ -17,4 +17,4 @@
- # On ARM, specifying -fnon-call-exceptions will needlessly pull in
- # the unwinder in simple programs which use 64-bit division.  Omitting
- # the option is safe.
--LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
-+LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
-diff -NBaur gcc-6.2.0/libgcc/crtstuff.c gcc-6.2.0-arm/libgcc/crtstuff.c
---- gcc-6.2.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.2.0-arm/libgcc/crtstuff.c	2016-09-07 08:58:29.985682360 +0100
-@@ -47,7 +47,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
--
-+#define USED_FOR_TARGET
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
-diff -NBaur gcc-6.2.0/libgcc/Makefile.in gcc-6.2.0-arm/libgcc/Makefile.in
---- gcc-6.2.0/libgcc/Makefile.in	2016-02-25 12:23:52.000000000 +0000
-+++ gcc-6.2.0-arm/libgcc/Makefile.in	2016-09-07 08:58:29.989682360 +0100
-@@ -820,7 +820,7 @@
- # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
- # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
- 
--c_flags := -fexceptions
-+c_flags := -fno-exceptions
- 
- ifeq ($(enable_shared),yes)
- 

dkarm-eabi/patches/gcc-8.1.0.patch

@@ -0,0 +1,291 @@
+diff -NBaur gcc-8.1.0/gcc/config/arm/arm-cpus.in gcc-8.1.0-arm/gcc/config/arm/arm-cpus.in
+--- gcc-8.1.0/gcc/config/arm/arm-cpus.in	2018-01-11 15:21:26.000000000 +0000
++++ gcc-8.1.0-arm/gcc/config/arm/arm-cpus.in	2018-05-11 01:05:33.648236777 +0000
+@@ -393,7 +393,7 @@
+  tune for mpcore
+  tune flags CO_PROC
+  base 6K
+- isa ARMv6k
++ isa ARMv6k VFPv2 FP_DBL
+  option fp add VFPv2 FP_DBL
+  optalias vfpv2 fp
+  option nofp remove ALL_FP
+diff -NBaur gcc-8.1.0/gcc/config/arm/t-arm-elf gcc-8.1.0-arm/gcc/config/arm/t-arm-elf
+--- gcc-8.1.0/gcc/config/arm/t-arm-elf	2018-01-11 15:21:26.000000000 +0000
++++ gcc-8.1.0-arm/gcc/config/arm/t-arm-elf	2018-05-10 23:15:13.124566279 +0000
+@@ -1,4 +1,4 @@
+-# Copyright (C) 1998-2018 Free Software Foundation, Inc.
++# Copyright (C) 1998-2017 Free Software Foundation, Inc.
+ #
+ # This file is part of GCC.
+ #
+@@ -16,110 +16,83 @@
+ # along with GCC; see the file COPYING3.  If not see
+ # <http://www.gnu.org/licenses/>.
+ 
+-# Build a very basic set of libraries that should cater for most cases.
+-
+-# Single-precision floating-point is NOT supported; we don't build a
+-# suitable library for that.  Use the rm-profile config in that case.
+-
+-# PART 1 - Useful groups of options
+-
+-dp_fpus		:= vfp vfpv2 vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16 \
+-		   neon neon-vfpv3 neon-fp16 vfpv4 neon-vfpv4 vfpv4-d16 \
+-		   fpv5-d16 fp-armv8 neon-fp-armv8 crypto-neon-fp-armv8 \
+-		   vfp3
+-
+-sp_fpus		:= vfpv3xd vfpv3xd-fp16  fpv4-sp-d16 fpv5-sp-d16
+-
+-v7a_fps		:= vfpv3 vfpv3-fp16 vfpv4 simd neon-fp16 neon-vfpv4
+-v7ve_fps	:= vfpv3-d16 vfpv3 vfpv3-d16-fp16 vfpv3-fp16 vfpv4 neon \
+-		   neon-fp16 simd
+-
+-# Not all these permutations exist for all architecture variants, but
+-# it seems to work ok.
+-v8_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-# We don't do anything special with these.  Pre-v4t probably doesn't work.
+-all_early_nofp	:= armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5t
+-
+-all_early_arch	:= armv5e armv5tej armv6 armv6j armv6k armv6z armv6kz \
+-		   armv6zk armv6t2 iwmmxt iwmmxt2
+-
+-all_v7_a_r	:= armv7-a armv7ve armv7-r
+-
+-all_v8_archs	:= armv8-a armv8-a+crc armv8.1-a armv8.2-a armv8.3-a armv8.4-a
+-
+-# No floating point variants, require thumb1 softfp
+-all_nofp_t	:= armv6-m armv6s-m armv8-m.base
+-
+-all_nofp_t2	:= armv7-m
+-
+-all_sp_only	:= armv7e-m armv8-m.main
+-
+-MULTILIB_OPTIONS     =
+-MULTILIB_DIRNAMES    =
++MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k mfloat-abi=hard
++MULTILIB_DIRNAMES    = thumb be armv6k fpu
+ MULTILIB_EXCEPTIONS  = 
+ MULTILIB_MATCHES     =
+-MULTILIB_REUSE	     =
+-
+-# PART 2 - multilib build rules
+-
+-MULTILIB_OPTIONS     += marm/mthumb
+-MULTILIB_DIRNAMES    += arm thumb
+-
+-MULTILIB_OPTIONS     += mfpu=auto
+-MULTILIB_DIRNAMES    += autofp
+-
+-MULTILIB_OPTIONS     += march=armv5te+fp/march=armv7+fp
+-MULTILIB_DIRNAMES    += v5te v7
+-
+-MULTILIB_OPTIONS     += mfloat-abi=hard
+-MULTILIB_DIRNAMES    += fpu
+-
+-# Build a total of 4 library variants (base options plus the following):
+-MULTILIB_REQUIRED    += mthumb
+-MULTILIB_REQUIRED    += marm/mfpu=auto/march=armv5te+fp/mfloat-abi=hard
+-MULTILIB_REQUIRED    += mthumb/mfpu=auto/march=armv7+fp/mfloat-abi=hard
+-
+-# PART 3 - Match rules
+-
+-# Map all supported FPUs onto mfpu=auto
+-MULTILIB_MATCHES     += $(foreach FPU, $(dp_fpus), \
+-			  mfpu?auto=mfpu?$(FPU))
+-
+-MULTILIB_MATCHES     += march?armv5te+fp=march?armv5te
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_early_arch), \
+-		          march?armv5te+fp=march?$(ARCH) \
+-			  march?armv5te+fp=march?$(ARCH)+fp)
+-
+-MULTILIB_MATCHES     += march?armv7+fp=march?armv7
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7a_fps), \
+-		          march?armv7+fp=march?armv7-a+$(FPARCH))
+ 
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7ve_fps), \
+-		          march?armv7+fp=march?armv7ve+$(FPARCH))
++MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard 
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v7_a_r), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  march?armv7+fp=march?$(ARCH)+fp)
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v8_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v8_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
++MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
++MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, armv7e-m armv8-m.mainline, \
+-			  march?armv7+fp=march?$(ARCH)+fp.dp)
+ 
+-# PART 4 - Reuse rules
+ 
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto/march.armv5te+fp
+-MULTILIB_REUSE	     += mthumb=mthumb/march.armv5te+fp
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=marm/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=mfpu.auto/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mthumb/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mfpu.auto/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=march.armv7+fp/mfloat-abi.hard
++#MULTILIB_OPTIONS     += mcpu=fa526/mcpu=fa626/mcpu=fa606te/mcpu=fa626te/mcpu=fmp626/mcpu=fa726te
++#MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
++#MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
++
++#MULTILIB_OPTIONS      += march=armv7
++#MULTILIB_DIRNAMES     += thumb2
++#MULTILIB_EXCEPTIONS   += march=armv7* marm/*march=armv7*
++#MULTILIB_MATCHES      += march?armv7=march?armv7-a
++#MULTILIB_MATCHES      += march?armv7=march?armv7-r
++#MULTILIB_MATCHES      += march?armv7=march?armv7-m
++#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-a8
++#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-r4
++#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-m3
++
++# Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
++# express that here?  Also, we really need architecture v5e or later
++# (mcrr etc).
++#MULTILIB_OPTIONS       += mfloat-abi=hard
++#MULTILIB_DIRNAMES      += fpu
++#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
++#MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
++#MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
++
++# MULTILIB_OPTIONS    += mcpu=ep9312
++# MULTILIB_DIRNAMES   += ep9312
++# MULTILIB_EXCEPTIONS += *mthumb/*mcpu=ep9312*
++#	
++# MULTILIB_OPTIONS     += mlittle-endian/mbig-endian
++# MULTILIB_DIRNAMES    += le be
++# MULTILIB_MATCHES     += mbig-endian=mbe mlittle-endian=mle
++# 
++# MULTILIB_OPTIONS    += mfloat-abi=hard/mfloat-abi=soft
++# MULTILIB_DIRNAMES   += fpu soft
++# MULTILIB_EXCEPTIONS += *mthumb/*mfloat-abi=hard*
++# 
++# MULTILIB_OPTIONS    += mno-thumb-interwork/mthumb-interwork
++# MULTILIB_DIRNAMES   += normal interwork
++# 
++# MULTILIB_OPTIONS    += fno-leading-underscore/fleading-underscore
++# MULTILIB_DIRNAMES   += elf under
++# 
++# MULTILIB_OPTIONS    += mcpu=arm7
++# MULTILIB_DIRNAMES   += nofmult
++# MULTILIB_EXCEPTIONS += *mthumb*/*mcpu=arm7*
++# # Note: the multilib_exceptions matches both -mthumb and
++# # -mthumb-interwork
++# #
++# # We have to match all the arm cpu variants which do not have the
++# # multiply instruction and treat them as if the user had specified
++# # -mcpu=arm7.  Note that in the following the ? is interpreted as
++# # an = for the purposes of matching command line options.
++# # FIXME: There ought to be a better way to do this.
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7d
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7di
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm70
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm700
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm700i
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm710
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm710c
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7100
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7500
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7500fe
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm6
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm60
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm600
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm610
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm620
+diff -NBaur gcc-8.1.0/gcc/config/arm/unknown-elf.h gcc-8.1.0-arm/gcc/config/arm/unknown-elf.h
+--- gcc-8.1.0/gcc/config/arm/unknown-elf.h	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-arm/gcc/config/arm/unknown-elf.h	2018-05-10 23:01:02.432676190 +0000
+@@ -29,7 +29,7 @@
+ #endif
+ 
+ /* Now we define the strings used to build the spec file.  */
+-#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
++#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
+ 
+ #undef  STARTFILE_SPEC
+ #define STARTFILE_SPEC	\
+@@ -93,4 +93,9 @@
+    udivmoddi4, which will depend on the exception unwind routines,
+    which will depend on abort, which is defined in libc.  */ 
+ #undef LINK_GCC_C_SEQUENCE_SPEC
+-#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
++
++/* The system headers under devkitARM are C++-aware.  */
++#undef NO_IMPLICIT_EXTERN_C
++#define NO_IMPLICIT_EXTERN_C
++
+diff -NBaur gcc-8.1.0/gcc/gcc.c gcc-8.1.0-arm/gcc/gcc.c
+--- gcc-8.1.0/gcc/gcc.c	2018-02-09 06:44:06.000000000 +0000
++++ gcc-8.1.0-arm/gcc/gcc.c	2018-05-10 23:01:02.440676328 +0000
+@@ -786,6 +786,11 @@
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1081,6 +1086,7 @@
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1577,6 +1583,7 @@
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff -NBaur gcc-8.1.0/libgcc/config/arm/t-bpabi gcc-8.1.0-arm/libgcc/config/arm/t-bpabi
+--- gcc-8.1.0/libgcc/config/arm/t-bpabi	2012-08-17 15:06:06.000000000 +0000
++++ gcc-8.1.0-arm/libgcc/config/arm/t-bpabi	2018-05-10 23:01:02.440676328 +0000
+@@ -17,4 +17,4 @@
+ # On ARM, specifying -fnon-call-exceptions will needlessly pull in
+ # the unwinder in simple programs which use 64-bit division.  Omitting
+ # the option is safe.
+-LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
++LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
+diff -NBaur gcc-8.1.0/libgcc/crtstuff.c gcc-8.1.0-arm/libgcc/crtstuff.c
+--- gcc-8.1.0/libgcc/crtstuff.c	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-arm/libgcc/crtstuff.c	2018-05-10 23:01:02.440676328 +0000
+@@ -47,7 +47,7 @@
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
+-
++#define USED_FOR_TARGET
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,
+    this will have to do.  */
+diff -NBaur gcc-8.1.0/libgcc/Makefile.in gcc-8.1.0-arm/libgcc/Makefile.in
+--- gcc-8.1.0/libgcc/Makefile.in	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-arm/libgcc/Makefile.in	2018-05-10 23:01:02.440676328 +0000
+@@ -847,7 +847,7 @@
+ # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
+ # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
+ 
+-c_flags := -fexceptions
++c_flags := -fno-exceptions
+ 
+ ifeq ($(enable_shared),yes)
+ 

dkarm-eabi/patches/gdb-7.11.patch

@@ -1,32 +0,0 @@
-diff -NBaur gdb-7.11/gdb/Makefile.in gdb-7.11-arm/gdb/Makefile.in
---- gdb-7.11/gdb/Makefile.in	2016-02-24 09:55:15.000000000 +0000
-+++ gdb-7.11-arm/gdb/Makefile.in	2016-05-13 15:06:03.629019640 +0100
-@@ -2726,10 +2726,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@
-+@GMAKE_TRUE@override POSTCOMPILE =
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -NBaur gdb-7.11/sim/common/Make-common.in gdb-7.11-arm/sim/common/Make-common.in
---- gdb-7.11/sim/common/Make-common.in	2016-02-10 03:19:39.000000000 +0000
-+++ gdb-7.11-arm/sim/common/Make-common.in	2016-05-13 15:06:03.633019640 +0100
-@@ -402,10 +402,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@
-+@GMAKE_TRUE@override POSTCOMPILE =
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)

dkarm-eabi/patches/gdb-8.0.patch

@@ -0,0 +1,441 @@
+diff --git a/gdb/Makefile.in b/gdb/Makefile.in
+index 1d2dbaf3f7..2d24f09c1b 100644
+--- a/gdb/Makefile.in
++++ b/gdb/Makefile.in
+@@ -779,6 +779,7 @@ ALL_64_TARGET_OBS = \
+ ALL_TARGET_OBS = \
+ 	arc-tdep.o \
+ 	arm.o \
++	arm-3ds-tdep.o \
+ 	arm-bsd-tdep.o \
+ 	arm-get-next-pcs.o \
+ 	arm-linux.o \
+@@ -2487,6 +2488,7 @@ ALLDEPFILES = \
+ 	amd64-tdep.c \
+ 	arc-tdep.c \
+ 	arm.c \
++	arm-3ds-tdep.c \
+ 	arm-bsd-tdep.c \
+ 	arm-get-next-pcs.c \
+ 	arm-linux.c \
+diff --git a/gdb/arm-3ds-tdep.c b/gdb/arm-3ds-tdep.c
+new file mode 100644
+index 0000000000..ad014e28db
+--- /dev/null
++++ b/gdb/arm-3ds-tdep.c
+@@ -0,0 +1,197 @@
++/* Target-dependent code for 3DS. */
++
++/* This uses code from GDB, which license is: */
++
++/*
++   Copyright (C) 2002-2017 Free Software Foundation, Inc.
++
++   This file is part of GDB.
++
++   This program is free software; you can redistribute it and/or modify
++   it under the terms of the GNU General Public License as published by
++   the Free Software Foundation; either version 3 of the License, or
++   (at your option) any later version.
++
++   This program is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++   GNU General Public License for more details.
++
++   You should have received a copy of the GNU General Public License
++   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
++
++#include "defs.h"
++#include "gdbcore.h"
++#include "target.h"
++#include "osabi.h"
++#include "xml-syscall.h"
++
++#include "arch/arm.h"
++#include "arch/arm-get-next-pcs.h"
++#include "arm-tdep.h"
++
++static const gdb_byte arm_3ds_arm_le_breakpoint[] = {0xff, 0x00, 0x00, 0xef};
++static const gdb_byte arm_3ds_thumb_le_breakpoint[] = {0xff, 0xdf};
++
++static CORE_ADDR
++  arm_3ds_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self);
++
++/* Operation function pointers for get_next_pcs.  */
++static struct arm_get_next_pcs_ops arm_3ds_get_next_pcs_ops = {
++  arm_get_next_pcs_read_memory_unsigned_integer,
++  arm_3ds_get_next_pcs_syscall_next_pc,
++  arm_get_next_pcs_addr_bits_remove,
++  arm_get_next_pcs_is_thumb,
++  NULL,
++};
++
++static CORE_ADDR
++arm_3ds_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self)
++{
++  CORE_ADDR next_pc = 0;
++  CORE_ADDR pc = regcache_read_pc (self->regcache);
++  int is_thumb = arm_is_thumb (self->regcache);
++  ULONGEST svc_number = 0;
++
++  if (is_thumb)
++    {
++      next_pc = pc + 2;
++    }
++  else
++    {
++      next_pc = pc + 4;
++    }
++
++  /* Addresses for calling Thumb functions have the bit 0 set.  */
++  if (is_thumb)
++    next_pc = MAKE_THUMB_ADDR (next_pc);
++
++  return next_pc;
++}
++
++static VEC (CORE_ADDR) *
++arm_3ds_software_single_step (struct regcache *regcache)
++{
++  struct gdbarch *gdbarch = get_regcache_arch (regcache);
++  struct arm_get_next_pcs next_pcs_ctx;
++  CORE_ADDR pc;
++  int i;
++  VEC (CORE_ADDR) *next_pcs = NULL;
++  struct cleanup *old_chain;
++
++  /* If the target does have hardware single step, GDB doesn't have
++     to bother software single step.  */
++  if (target_can_do_single_step () == 1)
++    return NULL;
++
++  old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
++
++  arm_get_next_pcs_ctor (&next_pcs_ctx,
++			 &arm_3ds_get_next_pcs_ops,
++			 gdbarch_byte_order (gdbarch),
++			 gdbarch_byte_order_for_code (gdbarch),
++			 1,
++			 regcache);
++
++  next_pcs = arm_get_next_pcs (&next_pcs_ctx);
++
++  for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
++    {
++      pc = gdbarch_addr_bits_remove (gdbarch, pc);
++      VEC_replace (CORE_ADDR, next_pcs, i, pc);
++    }
++
++  discard_cleanups (old_chain);
++
++  return next_pcs;
++}
++
++static LONGEST
++arm_3ds_get_syscall_number (struct gdbarch *gdbarch,
++			      ptid_t ptid)
++{
++  struct regcache *regs = get_thread_regcache (ptid);
++
++  ULONGEST pc;
++  ULONGEST cpsr;
++  ULONGEST t_bit = arm_psr_thumb_bit (gdbarch);
++  int is_thumb;
++  ULONGEST svc_number = -1;
++
++  regcache_cooked_read_unsigned (regs, ARM_PC_REGNUM, &pc);
++  regcache_cooked_read_unsigned (regs, ARM_PS_REGNUM, &cpsr);
++  is_thumb = (cpsr & t_bit) != 0;
++
++  if (is_thumb)
++    {
++      enum bfd_endian byte_order_for_code =
++	gdbarch_byte_order_for_code (gdbarch);
++
++      /* PC gets incremented before the syscall-stop, so read the
++	 previous instruction.  */
++      unsigned long this_instr =
++	read_memory_unsigned_integer (pc - 2, 2, byte_order_for_code);
++
++      unsigned long svc_operand = (0x00ff & this_instr);
++      svc_number = svc_operand;
++    }
++  else
++    {
++      enum bfd_endian byte_order_for_code =
++	gdbarch_byte_order_for_code (gdbarch);
++
++      /* PC gets incremented before the syscall-stop, so read the
++	 previous instruction.  */
++      unsigned long this_instr =
++	read_memory_unsigned_integer (pc - 4, 4, byte_order_for_code);
++
++      unsigned long svc_operand = (0x000000ff & this_instr);
++      svc_number = svc_operand;
++    }
++
++  if (svc_number == 0xfe)
++    {
++      regcache_cooked_read_unsigned (regs, 12, &svc_number);
++    }
++
++  return svc_number;
++}
++
++static void
++arm_3ds_init_abi (struct gdbarch_info info,
++			    struct gdbarch *gdbarch)
++{
++  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
++
++  switch (info.byte_order)
++    {
++    case BFD_ENDIAN_LITTLE:
++      tdep->arm_breakpoint = arm_3ds_arm_le_breakpoint;
++      tdep->thumb_breakpoint = arm_3ds_thumb_le_breakpoint;
++      tdep->arm_breakpoint_size = sizeof (arm_3ds_arm_le_breakpoint);
++      tdep->thumb_breakpoint_size = sizeof (arm_3ds_thumb_le_breakpoint);
++      break;
++
++    default:
++      internal_error (__FILE__, __LINE__,
++        _("arm_gdbarch_init: bad byte order"));
++    }
++  tdep->fp_model = ARM_FLOAT_VFP;
++
++  /* Single stepping.  */
++  set_gdbarch_software_single_step (gdbarch, arm_3ds_software_single_step);
++
++  /* `catch syscall' */
++  set_xml_syscall_file_name (gdbarch, "syscalls/arm-3ds.xml");
++  set_gdbarch_get_syscall_number (gdbarch, arm_3ds_get_syscall_number);
++}
++
++/* Provide a prototype to silence -Wmissing-prototypes.  */
++extern initialize_file_ftype _initialize_arm_3ds_tdep;
++
++void
++_initialize_arm_3ds_tdep (void)
++{
++  gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_3DS,
++                          arm_3ds_init_abi);
++}
+diff --git a/gdb/configure.tgt b/gdb/configure.tgt
+index fdcb7b1d69..d8fd1622b8 100644
+--- a/gdb/configure.tgt
++++ b/gdb/configure.tgt
+@@ -119,8 +119,8 @@ arm*-*-symbianelf*)
+ 	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o arm-symbian-tdep.o"
+ 	;;
+ arm*-*-*)
+-	# Target: ARM embedded system
+-	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o"
++	# Target: ARM embedded system (+ 3DS)
++	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o arm-3ds-tdep.o"
+ 	gdb_sim=../sim/arm/libsim.a
+ 	;;
+ 
+diff --git a/gdb/data-directory/Makefile.in b/gdb/data-directory/Makefile.in
+index 304d4b05c0..2cf8986d3a 100644
+--- a/gdb/data-directory/Makefile.in
++++ b/gdb/data-directory/Makefile.in
+@@ -63,7 +63,7 @@ GEN_SYSCALLS_FILES = \
+ 	sparc-linux.xml \
+ 	sparc64-linux.xml
+ 
+-SYSCALLS_FILES = gdb-syscalls.dtd freebsd.xml $(GEN_SYSCALLS_FILES)
++SYSCALLS_FILES = gdb-syscalls.dtd freebsd.xml arm-3ds.xml $(GEN_SYSCALLS_FILES)
+ 
+ PYTHON_DIR = python
+ PYTHON_INSTALL_DIR = $(DESTDIR)$(GDB_DATADIR)/$(PYTHON_DIR)
+diff --git a/gdb/defs.h b/gdb/defs.h
+index a0b586f401..a1508fd5b3 100644
+--- a/gdb/defs.h
++++ b/gdb/defs.h
+@@ -604,6 +604,7 @@ enum gdb_osabi
+   GDB_OSABI_LYNXOS178,
+   GDB_OSABI_NEWLIB,
+   GDB_OSABI_SDE,
++  GDB_OSABI_3DS,
+ 
+   GDB_OSABI_INVALID		/* keep this last */
+ };
+diff --git a/gdb/osabi.c b/gdb/osabi.c
+index 84fa9c0273..c1c4bb1672 100644
+--- a/gdb/osabi.c
++++ b/gdb/osabi.c
+@@ -79,6 +79,7 @@ static const struct osabi_names gdb_osabi_names[] =
+   { "LynxOS178", NULL },
+   { "Newlib", NULL },
+   { "SDE", NULL },
++  { "3DS", NULL },
+ 
+   { "<invalid>", NULL }
+ };
+diff --git a/gdb/syscalls/arm-3ds.xml b/gdb/syscalls/arm-3ds.xml
+new file mode 100644
+index 0000000000..48780b7bd5
+--- /dev/null
++++ b/gdb/syscalls/arm-3ds.xml
+@@ -0,0 +1,159 @@
++<?xml version="1.0"?>
++<!DOCTYPE syscalls_info SYSTEM "gdb-syscalls.dtd">
++<!-- This file is located inside GDB and is based on files which license are: -->
++<!-- Copyright (C) 2009-2017 Free Software Foundation, Inc.
++
++     Copying and distribution of this file, with or without modification,
++     are permitted in any medium without royalty provided the copyright
++     notice and this notice are preserved.  This file is offered as-is,
++     without any warranty. -->
++<syscalls_info>
++  <syscall name="ControlMemory" number="1" groups="memory"/>
++  <syscall name="QueryMemory" number="2" groups="memory"/>
++
++  <syscall name="ExitProcess" number="3" groups="process"/>
++  <syscall name="GetProcessAffinityMask" number="4" groups="process"/>
++  <syscall name="SetProcessAffinityMask" number="5" groups="process"/>
++  <syscall name="GetProcessIdealProcessor" number="6" groups="process"/>
++  <syscall name="SetProcessIdealProcessor" number="7" groups="process"/>
++
++  <syscall name="CreateThread" number="8" groups="thread"/>
++  <syscall name="ExitThread" number="9" groups="thread"/>
++  <syscall name="SleepThread" number="10" groups="thread"/>
++  <syscall name="GetThreadPriority" number="11" groups="thread"/>
++  <syscall name="SetThreadPriority" number="12" groups="thread"/>
++  <syscall name="GetThreadAffinityMask" number="13" groups="thread"/>
++  <syscall name="SetThreadAffinityMask" number="14" groups="thread"/> <!-- removed -->
++  <syscall name="GetThreadIdealProcessor" number="15" groups="thread"/>
++  <syscall name="SetThreadIdealProcessor" number="16" groups="thread"/> <!-- removed -->
++  <syscall name="GetCurrentProcessorNumber" number="17" groups="thread"/>
++  <syscall name="Run" number="18" groups="thread"/>
++
++  <syscall name="CreateMutex" number="19" groups="synchronization"/>
++  <syscall name="ReleaseMutex" number="20" groups="synchronization"/>
++  <syscall name="CreateSemaphore" number="21" groups="synchronization"/>
++  <syscall name="ReleaseSemaphore" number="22" groups="synchronization"/>
++  <syscall name="CreateEvent" number="23" groups="synchronization"/>
++  <syscall name="SignalEvent" number="24" groups="synchronization"/>
++  <syscall name="ClearEvent" number="25" groups="synchronization"/>
++  <syscall name="CreateTimer" number="26" groups="synchronization"/>
++  <syscall name="SetTimer" number="27" groups="synchronization"/>
++  <syscall name="CancelTimer" number="28" groups="synchronization"/>
++  <syscall name="ClearTimer" number="29" groups="synchronization"/>
++
++  <syscall name="CreateMemoryBlock" number="30" groups="memory,ipc"/>
++  <syscall name="MapMemoryBlock" number="31" groups="memory,ipc"/>
++  <syscall name="UnmapMemoryBlock" number="32" groups="memory,ipc"/>
++
++  <syscall name="CreateAddressArbiter" number="33" groups="memory,synchronization"/>
++  <syscall name="ArbitrateAddress" number="34" groups="memory,synchronization"/>
++
++  <syscall name="CloseHandle" number="35" groups="synchronization,ipc,memory,thread,process,debug"/>
++  <syscall name="WaitSynchronization" number="36" groups="synchronization,ipc,thread,process,debug"/>
++  <syscall name="WaitSynchronizationN" number="37" groups="synchronization,ipc,thread,process,debug"/>
++  <syscall name="SignalAndWait" number="38" groups="synchronization"/> <!-- removed -->
++  <syscall name="DuplicateHandle" number="39" groups="synchronization,ipc,memory,thread,process,debug"/>
++
++  <syscall name="GetSystemTick" number="40" groups="information"/>
++  <syscall name="GetHandleInfo" number="41" groups="information,synchronization,ipc,memory,thread,process,debug"/>
++  <syscall name="GetSystemInfo" number="42" groups="information"/>
++  <syscall name="GetProcessInfo" number="43" groups="information,process"/>
++  <syscall name="GetThreadInfo" number="44" groups="information,thread"/>
++
++  <syscall name="ConnectToPort" number="45" groups="ipc"/>
++  <syscall name="GetCFWInfo" number="46" groups="custom,information"/> <!-- deprecated -->
++  <syscall name="SendSyncRequest2" number="47" groups="ipc"/> <!-- removed -->
++  <syscall name="SendSyncRequest3" number="48" groups="ipc"/> <!-- removed -->
++  <syscall name="SendSyncRequest4" number="49" groups="ipc"/> <!-- removed -->
++  <syscall name="SendSyncRequest" number="50" groups="ipc"/> <!-- removed -->
++
++  <syscall name="OpenProcess" number="51" groups="process"/>
++  <syscall name="OpenThread" number="52" groups="thread"/>
++
++  <syscall name="GetProcessId" number="53" groups="process"/>
++  <syscall name="GetProcessIdOfThread" number="54" groups="process,thread"/>
++  <syscall name="GetThreadId" number="55" groups="thread"/>
++
++  <syscall name="GetResourceLimit" number="56" groups="process"/>
++  <syscall name="GetResourceLimitLimitValues" number="57" groups="process"/>
++  <syscall name="GetResourceLimitCurrentValues" number="58" groups="process"/>
++
++  <syscall name="GetThreadContext" number="59" groups="debug,thread"/> <!-- removed -->
++  <syscall name="Break" number="60" groups="debug"/>
++  <syscall name="OutputDebugString" number="61" groups="debug"/>
++  <syscall name="ControlPerformanceCounter" number="62" groups="debug"/>
++
++  <syscall name="CreatePort" number="71" groups="ipc"/>
++  <syscall name="CreateSessionToPort" number="72" groups="ipc"/>
++  <syscall name="CreateSession" number="73" groups="ipc"/>
++  <syscall name="AcceptSession" number="74" groups="ipc"/>
++  <syscall name="ReplyAndReceive1" number="75" groups="ipc"/>
++  <syscall name="ReplyAndReceive2" number="76" groups="ipc"/>
++  <syscall name="ReplyAndReceive3" number="77" groups="ipc"/>
++  <syscall name="ReplyAndReceive4" number="78" groups="ipc"/>
++  <syscall name="ReplyAndReceive" number="79" groups="ipc"/>
++
++  <syscall name="BindInterrupt" number="80" groups="io,synchronization"/>
++  <syscall name="UnbindInterrupt" number="81" groups="io,synchronization"/>
++  <syscall name="InvalidateProcessDataCache" number="82" groups="io,memory,process"/>
++  <syscall name="StoreProcessDataCache" number="83" groups="io,memory,process"/>
++  <syscall name="FlushProcessDataCache" number="84" groups="io,memory,process"/>
++
++  <syscall name="StartInterprocessDma" number="85" groups="io,memory,ipc"/>
++  <syscall name="StopDma" number="86" groups="io,memory,ipc"/>
++  <syscall name="GetDmaState" number="87" groups="io,memory,ipc"/>
++  <syscall name="RestartDma" number="88" groups="io,memory,ipc"/>
++
++  <syscall name="SetGpuProt" number="89" groups="io"/>
++  <syscall name="SetWifiEnabled" number="90" groups="io"/>
++
++  <syscall name="DebugActiveProcess" number="96" groups="debug,process"/>
++  <syscall name="BreakDebugProcess" number="97" groups="debug,process"/>
++  <syscall name="TerminateDebugProcess" number="98" groups="debug,process"/>
++  <syscall name="GetProcessDebugEvent" number="99" groups="debug"/>
++  <syscall name="ContinueDebugEvent" number="100" groups="debug"/>
++  <syscall name="GetProcessList" number="101" groups="information,debug,process"/>
++  <syscall name="GetThreadList" number="102" groups="information,debug,thread"/>
++  <syscall name="GetDebugThreadContext" number="103" groups="debug,thread"/>
++  <syscall name="SetDebugThreadContext" number="104" groups="debug,thread"/>
++  <syscall name="QueryDebugProcessMemory" number="105" groups="debug,process,memory"/>
++  <syscall name="ReadProcessMemory" number="106" groups="debug,process,memory"/>
++  <syscall name="WriteProcessMemory" number="107" groups="debug,process,memory"/>
++  <syscall name="SetHardwareBreakPoint" number="108" group="debug"/>
++  <syscall name="GetDebugThreadParam" number="109" group="debug,thread"/>
++
++  <syscall name="ControlProcessMemory" number="112" group="process,memory"/>
++  <syscall name="MapProcessMemory" number="113" group="process,memory"/>
++  <syscall name="UnmapProcessMemory" number="114" group="process,memory"/>
++
++  <syscall name="CreateCodeSet" number="115" group="process,memory"/>
++  <syscall name="RandomStub" number="116" group="process,memory"/> <!-- removed -->
++  <syscall name="CreateProcess" number="117" group="process"/>
++  <syscall name="TerminateProcess" number="118" group="process"/>
++  <syscall name="SetProcessResourceLimits" number="119" group="process"/>
++  <syscall name="CreateResourceLimit" number="120" group="process"/>
++  <syscall name="SetResourceLimitValues" number="121" group="process"/>
++  <syscall name="AddCodeSegment" number="122" group="process"/> <!-- removed -->
++
++  <syscall name="Backdoor" number="123" group="kernel"/>
++  <syscall name="KernelSetState" number="124" group="kernel"/>
++
++  <syscall name="QueryProcessMemory" number="125" group="process,memory"/>
++
++  <syscall name="CustomBackdoor" number="128" group="custom,kernel"/>
++
++  <syscall name="ConvertVAToPA" number="144" group="custom,io,memory"/>
++  <syscall name="FlushDataCacheRange" number="145" group="custom,io,memory"/>
++  <syscall name="FlushEntireDataCache" number="146" group="custom,io,memory"/>
++  <syscall name="InvalidateInstructionCacheRange" number="147" group="custom,io,memory"/>
++  <syscall name="InvalidateEntireInstructionCache" number="148" group="custom,io,memory"/>
++
++  <syscall name="MapProcessMemoryEx" number="160" group="custom,process,memory"/>
++  <syscall name="UnmapProcessMemoryEx" number="161" group="custom,process,memory"/>
++  <syscall name="ControlMemoryEx" number="162" group="custom,memory"/>
++
++  <syscall name="ControlService" number="176" group="custom,ipc"/>
++  <syscall name="CopyHandle" number="177" groups="custom,synchronization,ipc,thread,process,debug"/>
++  <syscall name="TranslateHandle" number="178" groups="custom,synchronization,ipc,thread,process,debug"/>
++
++</syscalls_info>
+

dkarm-eabi/rules/3ds_rules

@@ -4,7 +4,9 @@ endif
 
 include $(DEVKITARM)/base_rules
 
-PORTLIBS	:=	$(PORTLIBS_PATH)/armv6k $(PORTLIBS_PATH)/3ds
+PORTLIBS	:=	$(PORTLIBS_PATH)/3ds
+
+export PATH := $(PORTLIBS_PATH)/3ds/bin:$(PATH)
 
 CTRULIB	?=	$(DEVKITPRO)/libctru
 

dkarm-eabi/rules/base_tools

@@ -10,7 +10,8 @@ endif
 #---------------------------------------------------------------------------------
 # path to tools
 #---------------------------------------------------------------------------------
-export PATH	:=	$(DEVKITARM)/bin:$(PATH)
+DEVKITPATH=$(shell echo "$(DEVKITPRO)" | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+export PATH	:=	$(DEVKITPATH)/tools/bin:$(DEVKITPATH)/devkitARM/bin:$(PATH)
 
 #---------------------------------------------------------------------------------
 # the prefix on the compiler executables

dkarm-eabi/scripts/build-gcc.sh

@@ -10,9 +10,10 @@ cd $target/binutils
 
 if [ ! -f configured-binutils ]
 then
-	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+	CPPFLAGS="$cppflags $CPPFLAGS" LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
         --prefix=$prefix --target=$target --disable-nls --disable-werror \
-	--enable-lto --enable-plugins --enable-poison-system-directories \
+	--enable-lto --enable-plugins --enable-gold \
+	--enable-poison-system-directories \
 	$CROSS_PARAMS \
         || { echo "Error configuring binutils"; exit 1; }
 	touch configured-binutils
@@ -39,14 +40,13 @@ cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" \
+	CPPFLAGS="$cppflags $CPPFLAGS" \
-	CXXFLAGS="$cflags" \
 	LDFLAGS="$ldflags" \
 	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	LDFLAGS_FOR_TARGET="" \
 	../../gcc-$GCC_VER/configure \
-		--enable-languages=c,c++,objc,obj-c++ \
+		--enable-languages=c,c++,objc,lto \
 		--with-gnu-as --with-gnu-ld --with-gcc \
 		--with-march=armv4t\
 		--enable-cxx-flags='-ffunction-sections' \
@@ -56,14 +56,17 @@ then
 		--enable-threads --disable-win32-registry --disable-nls --disable-debug\
 		--disable-libmudflap --disable-libssp --disable-libgomp \
 		--disable-libstdcxx-pch \
+		--enable-libstdcxx-time=yes \
+		--enable-libstdcxx-filesystem-ts \
 		--target=$target \
 		--with-newlib \
 		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 		--prefix=$prefix \
-		--enable-lto $plugin_ld\
+		--enable-lto\
 		--with-system-zlib \
-		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 46" \
+		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 49" \
 		$CROSS_PARAMS \
+		$CROSS_GCC_PARAMS \
 		|| { echo "Error configuring gcc"; exit 1; }
 	touch configured-gcc
 fi
@@ -84,6 +87,11 @@ fi
 unset CFLAGS
 cd $BUILDDIR
 
+OLD_CC=$CC
+OLDCXX=$CXX
+unset CC
+unset CXX
+
 #---------------------------------------------------------------------------------
 # build and install newlib
 #---------------------------------------------------------------------------------
@@ -116,6 +124,9 @@ then
 	touch installed-newlib
 fi
 
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
 #---------------------------------------------------------------------------------
 # build and install the final compiler
 #---------------------------------------------------------------------------------
@@ -140,6 +151,39 @@ rm -fr $prefix/$target/sys-include
 
 cd $BUILDDIR
 
+
+#---------------------------------------------------------------------------------
+# copy base rulesets
+#---------------------------------------------------------------------------------
+cp -v $BUILDSCRIPTDIR/dkarm-eabi/rules/* $prefix
+
+
+#---------------------------------------------------------------------------------
+# set env variables
+#---------------------------------------------------------------------------------
+export DEVKITPRO=$TOOLPATH
+export DEVKITARM=$DEVKITPRO/devkitARM
+
+#---------------------------------------------------------------------------------
+# Install and build the crt0 files
+#---------------------------------------------------------------------------------
+
+cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/$target/lib/
+cd $prefix/$target/lib/
+
+
+$MAKE CRT=gba
+$MAKE CRT=gp32
+$MAKE CRT=er
+$MAKE CRT=gp32_gpsdk
+$MAKE CRT=ds_arm7
+$MAKE CRT=ds_arm9
+$MAKE CRT=ds_cart
+$MAKE ds_arm7_vram_crt0
+$MAKE 3dsx_crt0
+
+cd $BUILDDIR
+
 #---------------------------------------------------------------------------------
 # build and install the debugger
 #---------------------------------------------------------------------------------
@@ -150,8 +194,7 @@ PLATFORM=`uname -s`
 
 if [ ! -f configured-gdb ]
 then
-	CFLAGS="$cflags" \
+	CPPFLAGS="$cppflags $CPPFLAGS" \
-	CXXFLAGS="$cflags" \
 	LDFLAGS="$ldflags" \
 	../../gdb-$GDB_VER/configure \
 	--disable-nls --prefix=$prefix --target=$target --disable-werror \

dkarm-eabi/scripts/build-libs.sh

@@ -3,27 +3,6 @@
 export DEVKITPRO=$TOOLPATH
 export DEVKITARM=$DEVKITPRO/devkitARM
 
-#---------------------------------------------------------------------------------
-# copy base rulesets
-#---------------------------------------------------------------------------------
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/rules/* $prefix
-
-#---------------------------------------------------------------------------------
-# Install and build the gba crt
-#---------------------------------------------------------------------------------
-
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/$target/lib/
-cd $prefix/$target/lib/
-$MAKE CRT=gba
-$MAKE CRT=gp32
-$MAKE CRT=er
-$MAKE CRT=gp32_gpsdk
-$MAKE CRT=ds_arm7
-$MAKE CRT=ds_arm9
-$MAKE CRT=ds_cart
-$MAKE ds_arm7_vram_crt0
-$MAKE 3dsx_crt0
-
 cd $BUILDDIR/libgba-$LIBGBA_VER
 $MAKE || { echo "error building libgba"; exit 1; }
 $MAKE install || { echo "error installing libgba"; exit 1; }

dkarm-eabi/scripts/build-tools.sh

@@ -6,7 +6,7 @@ do
 	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
 	cd $BUILDDIR/$dir
 	if [ ! -f configured ]; then
-		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$prefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
+		CPPFLAGS="$cppflags $CPPFLAGS" ./configure --prefix=$toolsprefix $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
 		touch configured
 	fi
 	if [ ! -f built ]; then

dkppc/crtls/ogc.ld

@@ -93,7 +93,11 @@ SECTIONS
 
 	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
 	.rodata1   : { *(.rodata1) }
-	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
+	.sdata2   : { 
+		PROVIDE(_SDA2_BASE_ = . );
+		*(.sdata2) *(.sdata2.*)
+		*(.gnu.linkonce.s2.*)
+	}
 	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  */
@@ -174,6 +178,7 @@ SECTIONS
 
 	.sdata     :
 	{
+		PROVIDE(_SDA_BASE_ = . );
 		*(.sdata)
 		*(.sdata.*)
 		*(.gnu.linkonce.s.*)

dkppc/crtls/rvl.ld

@@ -104,7 +104,12 @@ SECTIONS
 
 	.rodata   : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } :data
 	.rodata1   : { *(.rodata1) }
-	.sdata2   : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) }
+	.sdata2   : {
+		PROVIDE(_SDA2_BASE_ = .);
+		*(.sdata2)
+		*(.sdata2.*)
+		*(.gnu.linkonce.s2.*)
+	}
 	.sbss2   : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) }
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  */
@@ -185,6 +190,7 @@ SECTIONS
 
 	.sdata     :
 	{
+		PROVIDE(_SDA_BASE_ = .);
 		*(.sdata)
 		*(.sdata.*)
 		*(.gnu.linkonce.s.*)

dkppc/patches/binutils-2.27.patch

@@ -1,12 +0,0 @@
-diff -Nbaur binutils-2.27/opcodes/ppc-opc.c binutils-2.27-ppc/opcodes/ppc-opc.c
---- binutils-2.27/opcodes/ppc-opc.c	2016-08-03 08:36:54.000000000 +0100
-+++ binutils-2.27-ppc/opcodes/ppc-opc.c	2016-11-08 21:37:45.360000000 +0000
-@@ -3037,7 +3037,7 @@
- #define MFDEC1	PPC_OPCODE_POWER
- #define MFDEC2	PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE | PPC_OPCODE_TITAN
- #define BOOKE	PPC_OPCODE_BOOKE
--#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS
-+#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS
- #define PPCE300 PPC_OPCODE_E300
- #define PPCSPE	PPC_OPCODE_SPE
- #define PPCISEL PPC_OPCODE_ISEL

dkppc/patches/binutils-2.30.patch

@@ -0,0 +1,12 @@
+diff -NBaur binutils-2.30/opcodes/ppc-opc.c binutils-2.30-ppc/opcodes/ppc-opc.c
+--- binutils-2.30/opcodes/ppc-opc.c	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-ppc/opcodes/ppc-opc.c	2018-05-27 22:33:42.302025484 +0100
+@@ -3488,7 +3488,7 @@
+ #define MFDEC2	(PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE \
+ 		 | PPC_OPCODE_TITAN)
+ #define BOOKE	PPC_OPCODE_BOOKE
+-#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS
++#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS
+ #define PPCE300 PPC_OPCODE_E300
+ #define PPCSPE	PPC_OPCODE_SPE
+ #define PPCSPE2 PPC_OPCODE_SPE2

dkppc/patches/gcc-6.2.0.patch

@@ -1,330 +0,0 @@
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/rs6000.h gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h
---- gcc-6.1.0/gcc/config/rs6000/rs6000.h	2016-01-20 20:30:24.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h	2016-05-20 12:10:24.645019640 +0100
-@@ -205,6 +205,7 @@
-   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
-   SUBTARGET_EXTRA_SPECS
- 
-+#if 0
- /* -mcpu=native handling only makes sense with compiler running on
-    an PowerPC chip.  If changing this condition, also change
-    the condition in driver-rs6000.c.  */
-@@ -219,6 +220,8 @@
- #else
- #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- #endif
-+#endif
-+#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- 
- #ifndef CC1_CPU_SPEC
- #ifdef HAVE_LOCAL_CPU_DETECT
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.h gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h
---- gcc-6.1.0/gcc/config/rs6000/sysv4.h	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h	2016-05-20 12:12:27.073019640 +0100
-@@ -559,7 +559,12 @@
- 
- /* Default starting address if specified.  */
- #define LINK_START_SPEC "\
--%{mads         : %(link_start_ads)         ; \
-+%{mgcn|mogc    : %(link_start_ogc)         ; \
-+  mvgc         : %(link_start_vgc)         ; \
-+  mgcbios      : %(link_start_gcb)         ; \
-+  mrvl         : %(link_start_rvl)         ; \
-+  mwup         : %(link_start_wup)         ; \
-+  mads         : %(link_start_ads)         ; \
-   myellowknife : %(link_start_yellowknife) ; \
-   mmvme        : %(link_start_mvme)        ; \
-   msim         : %(link_start_sim)         ; \
-@@ -590,7 +594,9 @@
- 
- /* Any specific OS flags.  */
- #define LINK_OS_SPEC "\
--%{mads         : %(link_os_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
-+  mwup         : %(link_os_wup)         ; \
-+  mads         : %(link_os_ads)         ; \
-   myellowknife : %(link_os_yellowknife) ; \
-   mmvme        : %(link_os_mvme)        ; \
-   msim         : %(link_os_sim)         ; \
-@@ -608,7 +613,11 @@
- /* Override rs6000.h definition.  */
- #undef	CPP_SPEC
- #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
--%{mads         : %(cpp_os_ads)         ; \
-+%{mgcn         : %(cpp_os_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
-+  mrvl         : %(cpp_os_rvl)         ; \
-+  mwup         : %(cpp_os_wup)         ; \
-+  mads         : %(cpp_os_ads)         ; \
-   myellowknife : %(cpp_os_yellowknife) ; \
-   mmvme        : %(cpp_os_mvme)        ; \
-   msim         : %(cpp_os_sim)         ; \
-@@ -622,7 +630,11 @@
- 
- #undef	STARTFILE_SPEC
- #define	STARTFILE_SPEC "\
--%{mads         : %(startfile_ads)         ; \
-+%{mgcn         : %(startfile_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
-+  mrvl         : %(startfile_ogc)         ; \
-+  mwup         : %(startfile_wup)         ; \
-+  mads         : %(startfile_ads)         ; \
-   myellowknife : %(startfile_yellowknife) ; \
-   mmvme        : %(startfile_mvme)        ; \
-   msim         : %(startfile_sim)         ; \
-@@ -632,11 +643,13 @@
-   mcall-openbsd: %(startfile_openbsd)     ; \
-                : %(startfile_default)     }"
- 
--#define	STARTFILE_DEFAULT_SPEC "ecrti.o%s crtbegin.o%s"
-+#define	STARTFILE_DEFAULT_SPEC "crt0.o%s ecrti.o%s crtbegin.o%s"
- 
- #undef	LIB_SPEC
- #define	LIB_SPEC "\
--%{mads         : %(lib_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
-+  mwup         : %(lib_wup)         ; \
-+  mads         : %(lib_ads)         ; \
-   myellowknife : %(lib_yellowknife) ; \
-   mmvme        : %(lib_mvme)        ; \
-   msim         : %(lib_sim)         ; \
-@@ -646,11 +658,13 @@
-   mcall-openbsd: %(lib_openbsd)     ; \
-                : %(lib_default)     }"
- 
--#define LIB_DEFAULT_SPEC "-lc"
-+#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #undef	ENDFILE_SPEC
- #define	ENDFILE_SPEC "\
--%{mads         : %(endfile_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
-+  mwup         : %(endfile_wup)         ; \
-+  mads         : %(endfile_ads)         ; \
-   myellowknife : %(endfile_yellowknife) ; \
-   mmvme        : %(endfile_mvme)        ; \
-   msim         : %(endfile_sim)         ; \
-@@ -666,16 +679,33 @@
- 
- /* Motorola ADS support.  */
- #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
-+#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
-+#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
-+#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
-+#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
- 
- #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
- 
- #define LINK_START_ADS_SPEC "-T ads.ld%s"
-+#define LINK_START_OGC_SPEC "-T ogc.ld%s"
-+#define LINK_START_RVL_SPEC "-T rvl.ld%s"
-+#define LINK_START_WUP_SPEC "-T wup.ld%s"
-+#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
-+#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
- 
- #define LINK_OS_ADS_SPEC ""
-+#define LINK_OS_OGC_SPEC "--gc-sections"
-+#define LINK_OS_WUP_SPEC "--gc-sections"
- 
- #define CPP_OS_ADS_SPEC ""
-+#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
-+#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
-+#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
-+#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
- 
- /* Motorola Yellowknife support.  */
- #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -855,6 +879,8 @@
- #undef	SUBTARGET_EXTRA_SPECS
- #define	SUBTARGET_EXTRA_SPECS						\
-   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
-+  { "lib_ogc",			LIB_OGC_SPEC },				\
-+  { "lib_wup",			LIB_WUP_SPEC },	                        \
-   { "lib_ads",			LIB_ADS_SPEC },				\
-   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
-   { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -864,6 +889,8 @@
-   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
-   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
-   { "lib_default",		LIB_DEFAULT_SPEC },			\
-+  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
-+  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
-   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
-   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
-   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -873,6 +899,8 @@
-   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
-   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
-   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
-+  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
-+  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
-   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
-   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
-   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -884,7 +911,12 @@
-   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
-   { "link_shlib",		LINK_SHLIB_SPEC },			\
-   { "link_start",		LINK_START_SPEC },			\
-+  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
-+  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
-+  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
-+  { "link_start_wup",		LINK_START_WUP_SPEC },			\
-   { "link_start_ads",		LINK_START_ADS_SPEC },			\
-+  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
-   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
-   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
-   { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -894,6 +925,8 @@
-   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
-   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
-   { "link_os",			LINK_OS_SPEC },				\
-+  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
-+  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
-   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
-   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
-   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -905,6 +937,10 @@
-   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
-   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
-   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
-+  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
-+  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
-+  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
-+  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
-   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
-   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
-   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.opt gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-6.1.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt	2016-05-20 12:10:24.649019640 +0100
-@@ -120,6 +120,30 @@
- Target RejectNegative
- Link with libads.a, libc.a and crt0.o.
- 
-+mgcn
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mogc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mgcbios
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mvgc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mrvl
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use rvl linker script 
-+
-+mwup
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use wup linker script 
-+
- myellowknife
- Target RejectNegative
- Link with libyk.a, libc.a and crt0.o.
-diff -NBaur gcc-6.1.0/gcc/config.gcc gcc-6.1.0-ppc/gcc/config.gcc
---- gcc-6.1.0/gcc/config.gcc	2016-04-11 11:14:59.000000000 +0100
-+++ gcc-6.1.0-ppc/gcc/config.gcc	2016-05-20 12:10:24.661019640 +0100
-@@ -2381,7 +2381,7 @@
- 	use_gcc_stdint=wrap
- 	;;
- powerpc-*-eabi*)
--	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
-+	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
- 	extra_options="${extra_options} rs6000/sysv4.opt"
- 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- 	use_gcc_stdint=wrap
-diff -NBaur gcc-6.1.0/gcc/Makefile.in gcc-6.1.0-ppc/gcc/Makefile.in
---- gcc-6.1.0/gcc/Makefile.in	2016-04-15 12:49:39.000000000 +0100
-+++ gcc-6.1.0-ppc/gcc/Makefile.in	2016-05-20 12:10:24.641019640 +0100
-@@ -1073,8 +1073,8 @@
- # things like the go/%.o rule work properly; but we use $(*F) for the
- # file part, as we just want the file part of the stem, not the entire
- # file name.
--COMPILE = $(COMPILE.base) -MT $@ -MMD -MP -MF $(@D)/$(DEPDIR)/$(*F).TPo
--POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(*F).TPo $(@D)/$(DEPDIR)/$(*F).Po
-+COMPILE = $(COMPILE.base)
-+POSTCOMPILE =
- else
- COMPILE = source='$<' object='$@' libtool=no \
-     DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.1.0/libcpp/Makefile.in gcc-6.1.0-ppc/libcpp/Makefile.in
---- gcc-6.1.0/libcpp/Makefile.in	2016-04-27 09:22:11.000000000 +0100
-+++ gcc-6.1.0-ppc/libcpp/Makefile.in	2016-05-20 12:10:24.661019640 +0100
-@@ -208,8 +208,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S
---- gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S	2016-05-20 12:10:24.665019640 +0100
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S
---- gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S	2016-05-20 12:10:24.665019640 +0100
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.1.0/libgcc/crtstuff.c gcc-6.1.0-ppc/libgcc/crtstuff.c
---- gcc-6.1.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/crtstuff.c	2016-05-20 12:10:24.669019640 +0100
-@@ -47,6 +47,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
-+#define USED_FOR_TARGET
- 
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-diff -NBaur gcc-6.1.0/libstdc++-v3/include/std/type_traits gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits
---- gcc-6.1.0/libstdc++-v3/include/std/type_traits	2016-01-12 21:19:58.000000000 +0000
-+++ gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits	2016-05-20 12:10:24.669019640 +0100
-@@ -38,7 +38,7 @@
- #include <bits/c++config.h>
- 
- #ifdef _GLIBCXX_USE_C99_STDINT_TR1
--# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__)
-+# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__) && 0
- namespace std
- {
-   typedef __UINT_LEAST16_TYPE__ uint_least16_t;

dkppc/patches/gcc-6.3.0.patch

@@ -1,313 +0,0 @@
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/rs6000.h gcc-6.3.0-ppc/gcc/config/rs6000/rs6000.h
---- gcc-6.3.0/gcc/config/rs6000/rs6000.h	2016-07-07 20:42:07.000000000 +0100
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/rs6000.h	2017-01-05 02:42:41.980000000 +0000
-@@ -205,6 +205,7 @@
-   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
-   SUBTARGET_EXTRA_SPECS
- 
-+#if 0
- /* -mcpu=native handling only makes sense with compiler running on
-    an PowerPC chip.  If changing this condition, also change
-    the condition in driver-rs6000.c.  */
-@@ -219,6 +220,8 @@
- #else
- #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- #endif
-+#endif
-+#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- 
- #ifndef CC1_CPU_SPEC
- #ifdef HAVE_LOCAL_CPU_DETECT
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.h
---- gcc-6.3.0/gcc/config/rs6000/sysv4.h	2016-05-16 14:47:47.000000000 +0100
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.h	2017-01-05 02:46:27.020000000 +0000
-@@ -559,7 +559,12 @@
- 
- /* Default starting address if specified.  */
- #define LINK_START_SPEC "\
--%{mads         : %(link_start_ads)         ; \
-+%{mgcn|mogc    : %(link_start_ogc)         ; \
-+  mvgc         : %(link_start_vgc)         ; \
-+  mgcbios      : %(link_start_gcb)         ; \
-+  mrvl         : %(link_start_rvl)         ; \
-+  mwup         : %(link_start_wup)         ; \
-+  mads         : %(link_start_ads)         ; \
-   myellowknife : %(link_start_yellowknife) ; \
-   mmvme        : %(link_start_mvme)        ; \
-   msim         : %(link_start_sim)         ; \
-@@ -590,7 +595,9 @@
- 
- /* Any specific OS flags.  */
- #define LINK_OS_SPEC "\
--%{mads         : %(link_os_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
-+  mwup         : %(link_os_wup)         ; \
-+  mads         : %(link_os_ads)         ; \
-   myellowknife : %(link_os_yellowknife) ; \
-   mmvme        : %(link_os_mvme)        ; \
-   msim         : %(link_os_sim)         ; \
-@@ -608,7 +615,11 @@
- /* Override rs6000.h definition.  */
- #undef	CPP_SPEC
- #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
--%{mads         : %(cpp_os_ads)         ; \
-+%{mgcn         : %(cpp_os_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
-+  mrvl         : %(cpp_os_rvl)         ; \
-+  mwup         : %(cpp_os_wup)         ; \
-+  mads         : %(cpp_os_ads)         ; \
-   myellowknife : %(cpp_os_yellowknife) ; \
-   mmvme        : %(cpp_os_mvme)        ; \
-   msim         : %(cpp_os_sim)         ; \
-@@ -622,7 +633,11 @@
- 
- #undef	STARTFILE_SPEC
- #define	STARTFILE_SPEC "\
--%{mads         : %(startfile_ads)         ; \
-+%{mgcn         : %(startfile_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
-+  mrvl         : %(startfile_ogc)         ; \
-+  mwup         : %(startfile_wup)         ; \
-+  mads         : %(startfile_ads)         ; \
-   myellowknife : %(startfile_yellowknife) ; \
-   mmvme        : %(startfile_mvme)        ; \
-   msim         : %(startfile_sim)         ; \
-@@ -636,7 +651,9 @@
- 
- #undef	LIB_SPEC
- #define	LIB_SPEC "\
--%{mads         : %(lib_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
-+  mwup         : %(lib_wup)         ; \
-+  mads         : %(lib_ads)         ; \
-   myellowknife : %(lib_yellowknife) ; \
-   mmvme        : %(lib_mvme)        ; \
-   msim         : %(lib_sim)         ; \
-@@ -646,11 +663,13 @@
-   mcall-openbsd: %(lib_openbsd)     ; \
-                : %(lib_default)     }"
- 
--#define LIB_DEFAULT_SPEC "-lc"
-+#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #undef	ENDFILE_SPEC
- #define	ENDFILE_SPEC "\
--%{mads         : %(endfile_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
-+  mwup         : %(endfile_wup)         ; \
-+  mads         : %(endfile_ads)         ; \
-   myellowknife : %(endfile_yellowknife) ; \
-   mmvme        : %(endfile_mvme)        ; \
-   msim         : %(endfile_sim)         ; \
-@@ -666,16 +685,33 @@
- 
- /* Motorola ADS support.  */
- #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
-+#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
-+#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
-+#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
-+#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
- 
- #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
- 
- #define LINK_START_ADS_SPEC "-T ads.ld%s"
-+#define LINK_START_OGC_SPEC "-T ogc.ld%s"
-+#define LINK_START_RVL_SPEC "-T rvl.ld%s"
-+#define LINK_START_WUP_SPEC "-T wup.ld%s"
-+#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
-+#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
- 
- #define LINK_OS_ADS_SPEC ""
-+#define LINK_OS_OGC_SPEC "--gc-sections"
-+#define LINK_OS_WUP_SPEC "--gc-sections"
- 
- #define CPP_OS_ADS_SPEC ""
-+#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
-+#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
-+#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
-+#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
- 
- /* Motorola Yellowknife support.  */
- #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -866,6 +902,8 @@
- #undef	SUBTARGET_EXTRA_SPECS
- #define	SUBTARGET_EXTRA_SPECS						\
-   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
-+  { "lib_ogc",			LIB_OGC_SPEC },				\
-+  { "lib_wup",			LIB_WUP_SPEC },	                        \
-   { "lib_ads",			LIB_ADS_SPEC },				\
-   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
-   { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -875,6 +913,8 @@
-   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
-   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
-   { "lib_default",		LIB_DEFAULT_SPEC },			\
-+  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
-+  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
-   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
-   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
-   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -884,6 +924,8 @@
-   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
-   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
-   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
-+  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
-+  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
-   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
-   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
-   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -895,7 +937,12 @@
-   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
-   { "link_shlib",		LINK_SHLIB_SPEC },			\
-   { "link_start",		LINK_START_SPEC },			\
-+  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
-+  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
-+  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
-+  { "link_start_wup",		LINK_START_WUP_SPEC },			\
-   { "link_start_ads",		LINK_START_ADS_SPEC },			\
-+  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
-   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
-   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
-   { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -905,6 +952,8 @@
-   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
-   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
-   { "link_os",			LINK_OS_SPEC },				\
-+  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
-+  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
-   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
-   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
-   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -916,6 +965,10 @@
-   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
-   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
-   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
-+  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
-+  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
-+  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
-+  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
-   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
-   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
-   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.opt gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-6.3.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.opt	2017-01-05 02:42:41.984000000 +0000
-@@ -120,6 +120,30 @@
- Target RejectNegative
- Link with libads.a, libc.a and crt0.o.
- 
-+mgcn
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mogc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mgcbios
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mvgc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mrvl
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use rvl linker script 
-+
-+mwup
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use wup linker script 
-+
- myellowknife
- Target RejectNegative
- Link with libyk.a, libc.a and crt0.o.
-diff -NBaur gcc-6.3.0/gcc/config.gcc gcc-6.3.0-ppc/gcc/config.gcc
---- gcc-6.3.0/gcc/config.gcc	2016-11-07 21:38:43.000000000 +0000
-+++ gcc-6.3.0-ppc/gcc/config.gcc	2017-01-05 02:42:41.984000000 +0000
-@@ -2390,7 +2390,7 @@
- 	use_gcc_stdint=wrap
- 	;;
- powerpc-*-eabi*)
--	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
-+	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
- 	extra_options="${extra_options} rs6000/sysv4.opt"
- 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- 	use_gcc_stdint=wrap
-diff -NBaur gcc-6.3.0/gcc/Makefile.in gcc-6.3.0-ppc/gcc/Makefile.in
---- gcc-6.3.0/gcc/Makefile.in	2016-11-22 17:33:07.000000000 +0000
-+++ gcc-6.3.0-ppc/gcc/Makefile.in	2017-01-05 02:42:41.988000000 +0000
-@@ -1073,8 +1073,8 @@
- # things like the go/%.o rule work properly; but we use $(*F) for the
- # file part, as we just want the file part of the stem, not the entire
- # file name.
--COMPILE = $(COMPILE.base) -MT $@ -MMD -MP -MF $(@D)/$(DEPDIR)/$(*F).TPo
--POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(*F).TPo $(@D)/$(DEPDIR)/$(*F).Po
-+COMPILE = $(COMPILE.base)
-+POSTCOMPILE =
- else
- COMPILE = source='$<' object='$@' libtool=no \
-     DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.3.0/libcpp/Makefile.in gcc-6.3.0-ppc/libcpp/Makefile.in
---- gcc-6.3.0/libcpp/Makefile.in	2016-12-21 07:53:39.000000000 +0000
-+++ gcc-6.3.0-ppc/libcpp/Makefile.in	2017-01-05 02:42:41.988000000 +0000
-@@ -208,8 +208,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S gcc-6.3.0-ppc/libgcc/config/rs6000/crtrestvr.S
---- gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/config/rs6000/crtrestvr.S	2017-01-05 02:42:41.988000000 +0000
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S gcc-6.3.0-ppc/libgcc/config/rs6000/crtsavevr.S
---- gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/config/rs6000/crtsavevr.S	2017-01-05 02:42:41.988000000 +0000
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.3.0/libgcc/crtstuff.c gcc-6.3.0-ppc/libgcc/crtstuff.c
---- gcc-6.3.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/crtstuff.c	2017-01-05 02:42:41.988000000 +0000
-@@ -47,6 +47,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
-+#define USED_FOR_TARGET
- 
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,

dkppc/patches/gcc-8.1.0.patch

@@ -0,0 +1,911 @@
+diff --git a/config/gthr.m4 b/config/gthr.m4
+index 7b29f1f..814104f 100644
+--- a/config/gthr.m4
++++ b/config/gthr.m4
+@@ -12,6 +12,7 @@ AC_DEFUN([GCC_AC_THREAD_HEADER],
+ [
+ case $1 in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
++    dkp)	thread_header=config/rs6000/gthr-dkp.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/gcc/config.gcc b/gcc/config.gcc
+index a5defb0..d714072 100644
+--- a/gcc/config.gcc
++++ b/gcc/config.gcc
+@@ -2459,7 +2459,7 @@ powerpc-xilinx-eabi*)
+ 	use_gcc_stdint=wrap
+ 	;;
+ powerpc-*-eabi*)
+-	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
++	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/750cl.h"
+ 	extra_options="${extra_options} rs6000/sysv4.opt"
+ 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ 	use_gcc_stdint=wrap
+diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
+index b9b58a8..7c86ac6 100644
+--- a/gcc/config/rs6000/rs6000.h
++++ b/gcc/config/rs6000/rs6000.h
+@@ -205,6 +205,7 @@
+   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
+   SUBTARGET_EXTRA_SPECS
+ 
++#if 0
+ /* -mcpu=native handling only makes sense with compiler running on
+    an PowerPC chip.  If changing this condition, also change
+    the condition in driver-rs6000.c.  */
+@@ -219,6 +220,8 @@ extern const char *host_detect_local_cpu (int argc, const char **argv);
+ #else
+ #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ #endif
++#endif
++#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
+ 
+ #ifndef CC1_CPU_SPEC
+ #ifdef HAVE_LOCAL_CPU_DETECT
+diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
+index bb19d0d..ff5f80b 100644
+--- a/gcc/config/rs6000/sysv4.h
++++ b/gcc/config/rs6000/sysv4.h
+@@ -565,7 +565,12 @@ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
+ 
+ /* Default starting address if specified.  */
+ #define LINK_START_SPEC "\
+-%{mads         : %(link_start_ads)         ; \
++%{mgcn|mogc    : %(link_start_ogc)         ; \
++  mvgc         : %(link_start_vgc)         ; \
++  mgcbios      : %(link_start_gcb)         ; \
++  mrvl         : %(link_start_rvl)         ; \
++  mwup         : %(link_start_wup)         ; \
++  mads         : %(link_start_ads)         ; \
+   myellowknife : %(link_start_yellowknife) ; \
+   mmvme        : %(link_start_mvme)        ; \
+   msim         : %(link_start_sim)         ; \
+@@ -596,7 +601,9 @@ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
+ 
+ /* Any specific OS flags.  */
+ #define LINK_OS_SPEC "\
+-%{mads         : %(link_os_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
++  mwup         : %(link_os_wup)         ; \
++  mads         : %(link_os_ads)         ; \
+   myellowknife : %(link_os_yellowknife) ; \
+   mmvme        : %(link_os_mvme)        ; \
+   msim         : %(link_os_sim)         ; \
+@@ -614,7 +621,11 @@ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
+ /* Override rs6000.h definition.  */
+ #undef	CPP_SPEC
+ #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
+-%{mads         : %(cpp_os_ads)         ; \
++%{mgcn         : %(cpp_os_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
++  mrvl         : %(cpp_os_rvl)         ; \
++  mwup         : %(cpp_os_wup)         ; \
++  mads         : %(cpp_os_ads)         ; \
+   myellowknife : %(cpp_os_yellowknife) ; \
+   mmvme        : %(cpp_os_mvme)        ; \
+   msim         : %(cpp_os_sim)         ; \
+@@ -628,7 +639,11 @@ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
+ 
+ #undef	STARTFILE_SPEC
+ #define	STARTFILE_SPEC "\
+-%{mads         : %(startfile_ads)         ; \
++%{mgcn         : %(startfile_gcn)         ; \
++  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
++  mrvl         : %(startfile_ogc)         ; \
++  mwup         : %(startfile_wup)         ; \
++  mads         : %(startfile_ads)         ; \
+   myellowknife : %(startfile_yellowknife) ; \
+   mmvme        : %(startfile_mvme)        ; \
+   msim         : %(startfile_sim)         ; \
+@@ -642,7 +657,9 @@ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
+ 
+ #undef	LIB_SPEC
+ #define	LIB_SPEC "\
+-%{mads         : %(lib_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
++  mwup         : %(lib_wup)         ; \
++  mads         : %(lib_ads)         ; \
+   myellowknife : %(lib_yellowknife) ; \
+   mmvme        : %(lib_mvme)        ; \
+   msim         : %(lib_sim)         ; \
+@@ -652,11 +669,13 @@ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
+   mcall-openbsd: %(lib_openbsd)     ; \
+                : %(lib_default)     }"
+ 
+-#define LIB_DEFAULT_SPEC "-lc"
++#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #undef	ENDFILE_SPEC
+ #define	ENDFILE_SPEC "\
+-%{mads         : %(endfile_ads)         ; \
++%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
++  mwup         : %(endfile_wup)         ; \
++  mads         : %(endfile_ads)         ; \
+   myellowknife : %(endfile_yellowknife) ; \
+   mmvme        : %(endfile_mvme)        ; \
+   msim         : %(endfile_sim)         ; \
+@@ -672,16 +691,33 @@ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
+ 
+ /* Motorola ADS support.  */
+ #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
++#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
++#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
+ 
+ #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
++#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
++#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
+ 
+ #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
++#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
+ 
+ #define LINK_START_ADS_SPEC "-T ads.ld%s"
++#define LINK_START_OGC_SPEC "-T ogc.ld%s"
++#define LINK_START_RVL_SPEC "-T rvl.ld%s"
++#define LINK_START_WUP_SPEC "-T wup.ld%s"
++#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
++#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
+ 
+ #define LINK_OS_ADS_SPEC ""
++#define LINK_OS_OGC_SPEC "--gc-sections"
++#define LINK_OS_WUP_SPEC "--gc-sections"
+ 
+ #define CPP_OS_ADS_SPEC ""
++#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
++#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
++#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
++#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
+ 
+ /* Motorola Yellowknife support.  */
+ #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
+@@ -882,6 +918,8 @@ ncrtn.o%s"
+ #undef	SUBTARGET_EXTRA_SPECS
+ #define	SUBTARGET_EXTRA_SPECS						\
+   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
++  { "lib_ogc",			LIB_OGC_SPEC },				\
++  { "lib_wup",			LIB_WUP_SPEC },	                        \
+   { "lib_ads",			LIB_ADS_SPEC },				\
+   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
+   { "lib_mvme",			LIB_MVME_SPEC },			\
+@@ -891,6 +929,8 @@ ncrtn.o%s"
+   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
+   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
+   { "lib_default",		LIB_DEFAULT_SPEC },			\
++  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
++  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
+   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
+   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
+   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
+@@ -900,6 +940,8 @@ ncrtn.o%s"
+   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
+   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
+   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
++  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
++  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
+   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
+   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
+   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
+@@ -911,7 +953,12 @@ ncrtn.o%s"
+   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
+   { "link_shlib",		LINK_SHLIB_SPEC },			\
+   { "link_start",		LINK_START_SPEC },			\
++  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
++  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
++  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
++  { "link_start_wup",		LINK_START_WUP_SPEC },			\
+   { "link_start_ads",		LINK_START_ADS_SPEC },			\
++  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
+   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
+   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
+   { "link_start_sim",		LINK_START_SIM_SPEC },			\
+@@ -921,6 +968,8 @@ ncrtn.o%s"
+   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
+   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
+   { "link_os",			LINK_OS_SPEC },				\
++  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
++  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
+   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
+   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
+   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
+@@ -932,6 +981,10 @@ ncrtn.o%s"
+   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
+   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
+   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
++  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
++  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
++  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
++  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
+   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
+   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
+   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
+diff --git a/gcc/config/rs6000/sysv4.opt b/gcc/config/rs6000/sysv4.opt
+index 34fea0d..9451447 100644
+--- a/gcc/config/rs6000/sysv4.opt
++++ b/gcc/config/rs6000/sysv4.opt
+@@ -124,6 +124,30 @@ mads
+ Target RejectNegative
+ Link with libads.a, libc.a and crt0.o.
+ 
++mgcn
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mogc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use ogc linker script 
++
++mgcbios
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mvgc
++Target RejectNegative
++Link with libsysbase.a and libc.a, use gcbogc linker script 
++
++mrvl
++Target RejectNegative
++Link with libsysbase.a and libc.a, use rvl linker script 
++
++mwup
++Target RejectNegative
++Link with libsysbase.a and libc.a, use wup linker script 
++
+ myellowknife
+ Target RejectNegative
+ Link with libyk.a, libc.a and crt0.o.
+diff --git a/gcc/configure b/gcc/configure
+index 6121e16..6584112 100755
+--- a/gcc/configure
++++ b/gcc/configure
+@@ -11692,7 +11692,7 @@ case ${enable_threads} in
+     # default
+     target_thread_file='single'
+     ;;
+-  aix | dce | lynx | mipssde | posix | rtems | \
++  aix | dce | dkp | lynx | mipssde | posix | rtems | \
+   single | tpf | vxworks | win32)
+     target_thread_file=${enable_threads}
+     ;;
+diff --git a/gcc/configure.ac b/gcc/configure.ac
+index b066cc6..c42b3ef 100644
+--- a/gcc/configure.ac
++++ b/gcc/configure.ac
+@@ -1611,7 +1611,7 @@ case ${enable_threads} in
+     # default
+     target_thread_file='single'
+     ;;
+-  aix | dce | lynx | mipssde | posix | rtems | \
++  aix | dce | dkp | lynx | mipssde | posix | rtems | \
+   single | tpf | vxworks | win32)
+     target_thread_file=${enable_threads}
+     ;;
+diff --git a/libgcc/config/rs6000/crtrestvr.S b/libgcc/config/rs6000/crtrestvr.S
+index ba2b262..8d86610 100644
+--- a/libgcc/config/rs6000/crtrestvr.S
++++ b/libgcc/config/rs6000/crtrestvr.S
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -86,3 +86,4 @@ FUNC_END(_restvr_20)
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff --git a/libgcc/config/rs6000/crtsavevr.S b/libgcc/config/rs6000/crtsavevr.S
+index 077e33f..b7be68b 100644
+--- a/libgcc/config/rs6000/crtsavevr.S
++++ b/libgcc/config/rs6000/crtsavevr.S
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -86,3 +86,4 @@ FUNC_END(_savevr_20)
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff --git a/libgcc/config/rs6000/gthr-dkp.c b/libgcc/config/rs6000/gthr-dkp.c
+new file mode 100644
+index 0000000..94d6ba9
+--- /dev/null
++++ b/libgcc/config/rs6000/gthr-dkp.c
+@@ -0,0 +1,349 @@
++/* Threads compatibility routines for libgcc2 and libobjc.  */
++/* Compile this one with gcc.  */
++/* Copyright (C) 1997-2016 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++Under Section 7 of GPL version 3, you are granted additional
++permissions described in the GCC Runtime Library Exception, version
++3.1, as published by the Free Software Foundation.
++
++You should have received a copy of the GNU General Public License and
++a copy of the GCC Runtime Library Exception along with this program;
++see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++<http://www.gnu.org/licenses/>.  */
++
++#include "gthr-dkp.h"
++#include <stddef.h>
++
++__gthread_impl_t __gthread_impl = {
++  NULL, // active
++  NULL, // create
++  NULL, // join
++  NULL, // detach
++  NULL, // equal
++  NULL, // self
++  NULL, // yield
++  NULL, // once
++  NULL, // key_create
++  NULL, // key_delete
++  NULL, // getspecific
++  NULL, // setspecific
++  NULL, // mutex_init_function
++  NULL, // mutex_destroy
++  NULL, // mutex_lock
++  NULL, // mutex_trylock
++  NULL, // mutex_unlock
++  NULL, // recursive_mutex_init_function
++  NULL, // recursive_mutex_lock
++  NULL, // recursive_mutex_trylock
++  NULL, // recursive_mutex_unlock
++  NULL, // recursive_mutex_destroy
++  NULL, // cond_init_function
++  NULL, // cond_broadcast
++  NULL, // cond_signal
++  NULL, // cond_wait
++  NULL, // cond_timedwait
++  NULL, // cond_wait_recursive
++  NULL, // cond_destroy
++};
++
++int
++__gthread_active_p (void)
++{
++  if (!__gthread_impl.active) {
++    return 0;
++  }
++
++  return __gthread_impl.active();
++}
++
++int
++__gthread_create (__gthread_t *__threadid, void *(*__func) (void*),
++                  void *__args)
++{
++  if (!__gthread_impl.create) {
++    return -1;
++  }
++
++  return __gthread_impl.create(__threadid, __func, __args);
++}
++
++int
++__gthread_join (__gthread_t __threadid, void **__value_ptr)
++{
++  if (!__gthread_impl.join) {
++    return -1;
++  }
++
++  return __gthread_impl.join(__threadid, __value_ptr);
++}
++
++int
++__gthread_detach (__gthread_t __threadid)
++{
++  if (!__gthread_impl.detach) {
++    return -1;
++  }
++
++  return __gthread_impl.detach(__threadid);
++}
++
++int
++__gthread_equal (__gthread_t __t1, __gthread_t __t2)
++{
++  if (!__gthread_impl.equal) {
++    return -1;
++  }
++
++  return __gthread_impl.equal(__t1, __t2);
++}
++
++__gthread_t
++__gthread_self (void)
++{
++  if (!__gthread_impl.self) {
++    __gthread_t result = { 0 };
++    return result;
++  }
++
++  return __gthread_impl.self();
++}
++
++int
++__gthread_yield (void)
++{
++  if (!__gthread_impl.yield) {
++    return -1;
++  }
++
++  return __gthread_impl.yield();
++}
++
++int
++__gthread_once (__gthread_once_t *__once, void (*__func) (void))
++{
++  if (!__gthread_impl.once) {
++    return -1;
++  }
++
++  return __gthread_impl.once(__once, __func);
++}
++
++int
++__gthread_key_create (__gthread_key_t *__key, void (*__dtor) (void *))
++{
++  if (!__gthread_impl.key_create) {
++    return -1;
++  }
++
++  return __gthread_impl.key_create(__key, __dtor);
++}
++
++int
++__gthread_key_delete (__gthread_key_t __key)
++{
++  if (!__gthread_impl.key_delete) {
++    return -1;
++  }
++
++  return __gthread_impl.key_delete(__key);
++}
++
++void *
++__gthread_getspecific (__gthread_key_t __key)
++{
++  if (!__gthread_impl.getspecific) {
++    return NULL;
++  }
++
++  return __gthread_impl.getspecific(__key);
++}
++
++int
++__gthread_setspecific (__gthread_key_t __key, const void *__ptr)
++{
++  if (!__gthread_impl.setspecific) {
++    return -1;
++  }
++
++  return __gthread_impl.setspecific(__key, __ptr);
++}
++
++void
++__gthread_mutex_init_function (__gthread_mutex_t *__mutex)
++{
++  if (__gthread_impl.mutex_init_function) {
++    __gthread_impl.mutex_init_function(__mutex);
++  }
++}
++
++int
++__gthread_mutex_destroy (__gthread_mutex_t *__mutex)
++{
++  if (!__gthread_impl.mutex_destroy) {
++    return -1;
++  }
++
++  return __gthread_impl.mutex_destroy(__mutex);
++}
++
++int
++__gthread_mutex_lock (__gthread_mutex_t *__mutex)
++{
++  if (!__gthread_impl.mutex_lock) {
++    return -1;
++  }
++
++  return __gthread_impl.mutex_lock(__mutex);
++}
++
++int
++__gthread_mutex_trylock (__gthread_mutex_t *__mutex)
++{
++  if (!__gthread_impl.mutex_trylock) {
++    return -1;
++  }
++
++  return __gthread_impl.mutex_trylock(__mutex);
++}
++
++int
++__gthread_mutex_unlock (__gthread_mutex_t *__mutex)
++{
++  if (!__gthread_impl.mutex_unlock) {
++    return -1;
++  }
++
++  return __gthread_impl.mutex_unlock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_init_function (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__gthread_impl.recursive_mutex_init_function) {
++    return -1;
++  }
++
++  return __gthread_impl.recursive_mutex_init_function(__mutex);
++}
++
++int
++__gthread_recursive_mutex_lock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__gthread_impl.recursive_mutex_lock) {
++    return -1;
++  }
++
++  return __gthread_impl.recursive_mutex_lock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_trylock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__gthread_impl.recursive_mutex_trylock) {
++    return -1;
++  }
++
++  return __gthread_impl.recursive_mutex_trylock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_unlock (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__gthread_impl.recursive_mutex_unlock) {
++    return -1;
++  }
++
++  return __gthread_impl.recursive_mutex_unlock(__mutex);
++}
++
++int
++__gthread_recursive_mutex_destroy (__gthread_recursive_mutex_t *__mutex)
++{
++  if (!__gthread_impl.recursive_mutex_destroy) {
++    return -1;
++  }
++
++  return __gthread_impl.recursive_mutex_destroy(__mutex);
++}
++
++void
++__gthread_cond_init_function (__gthread_cond_t *__cond)
++{
++  if (__gthread_impl.cond_init_function) {
++    __gthread_impl.cond_init_function(__cond);
++  }
++}
++
++int
++__gthread_cond_broadcast (__gthread_cond_t *__cond)
++{
++  if (!__gthread_impl.cond_broadcast) {
++    return -1;
++  }
++
++  return __gthread_impl.cond_broadcast(__cond);
++}
++
++int
++__gthread_cond_signal (__gthread_cond_t *__cond)
++{
++  if (!__gthread_impl.cond_signal) {
++    return -1;
++  }
++
++  return __gthread_impl.cond_signal(__cond);
++}
++
++int
++__gthread_cond_wait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex)
++{
++  if (!__gthread_impl.cond_wait) {
++    return -1;
++  }
++
++  return __gthread_impl.cond_wait(__cond, __mutex);
++}
++
++int
++__gthread_cond_timedwait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                          const __gthread_time_t *__abs_timeout)
++{
++  if (!__gthread_impl.cond_timedwait) {
++    return -1;
++  }
++
++  return __gthread_impl.cond_timedwait(__cond, __mutex, __abs_timeout);
++}
++
++int
++__gthread_cond_wait_recursive (__gthread_cond_t *__cond,
++                               __gthread_recursive_mutex_t *__mutex)
++{
++  if (!__gthread_impl.cond_wait_recursive) {
++    return -1;
++  }
++
++  return __gthread_impl.cond_wait_recursive(__cond, __mutex);
++}
++
++int
++__gthread_cond_destroy (__gthread_cond_t* __cond)
++{
++  if (!__gthread_impl.cond_destroy) {
++    return -1;
++  }
++
++  return __gthread_impl.cond_destroy(__cond);
++}
+diff --git a/libgcc/config/rs6000/gthr-dkp.h b/libgcc/config/rs6000/gthr-dkp.h
+new file mode 100644
+index 0000000..281c19d
+--- /dev/null
++++ b/libgcc/config/rs6000/gthr-dkp.h
+@@ -0,0 +1,185 @@
++/* Threads compatibility routines for libgcc2 and libobjc.  */
++/* Compile this one with gcc.  */
++/* Copyright (C) 1997-2016 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 3, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
++for more details.
++
++Under Section 7 of GPL version 3, you are granted additional
++permissions described in the GCC Runtime Library Exception, version
++3.1, as published by the Free Software Foundation.
++
++You should have received a copy of the GNU General Public License and
++a copy of the GCC Runtime Library Exception along with this program;
++see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
++<http://www.gnu.org/licenses/>.  */
++
++#ifndef _GLIBCXX_GCC_GTHR_DKP_H
++#define _GLIBCXX_GCC_GTHR_DKP_H
++
++#define __GTHREADS 1
++#define __GTHREADS_CXX0X 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef void *                      __gthread_t;
++typedef struct { int padding[7]; }  __gthread_cond_t;
++typedef struct { int padding; }     __gthread_key_t;
++typedef struct { int padding[11]; } __gthread_mutex_t;
++typedef struct { int padding; }     __gthread_once_t;
++typedef struct { int padding[11]; } __gthread_recursive_mutex_t;
++typedef struct timespec             __gthread_time_t;
++
++#define __GTHREAD_HAS_COND 1
++#define _GTHREAD_USE_MUTEX_TIMEDLOCK 0
++
++#define __GTHREAD_ONCE_INIT { 0 }
++#define __GTHREAD_TIME_INIT { 0, 0 }
++
++#define __GTHREAD_COND_INIT_FUNCTION __gthread_cond_init_function
++#define __GTHREAD_MUTEX_INIT_FUNCTION __gthread_mutex_init_function
++#define __GTHREAD_RECURSIVE_MUTEX_INIT_FUNCTION __gthread_recursive_mutex_init_function
++
++typedef struct {
++  int (*active) (void);
++  int (*create) (__gthread_t *__threadid, void *(*__func) (void*),
++                 void *__args);
++  int (*join) (__gthread_t __threadid, void **__value_ptr);
++  int (*detach) (__gthread_t __threadid);
++  int (*equal) (__gthread_t __t1, __gthread_t __t2);
++  __gthread_t (*self) (void);
++  int (*yield) (void);
++  int (*once) (__gthread_once_t *__once, void (*__func) (void));
++  int (*key_create) (__gthread_key_t *__key, void (*__dtor) (void *));
++  int (*key_delete) (__gthread_key_t __key);
++  void * (*getspecific) (__gthread_key_t __key);
++  int (*setspecific) (__gthread_key_t __key, const void *__ptr);
++  void (*mutex_init_function) (__gthread_mutex_t *__mutex);
++  int (*mutex_destroy) (__gthread_mutex_t *__mutex);
++  int (*mutex_lock) (__gthread_mutex_t *__mutex);
++  int (*mutex_trylock) (__gthread_mutex_t *__mutex);
++  int (*mutex_unlock) (__gthread_mutex_t *__mutex);
++  int (*recursive_mutex_init_function) (__gthread_recursive_mutex_t *__mutex);
++  int (*recursive_mutex_lock) (__gthread_recursive_mutex_t *__mutex);
++  int (*recursive_mutex_trylock) (__gthread_recursive_mutex_t *__mutex);
++  int (*recursive_mutex_unlock) (__gthread_recursive_mutex_t *__mutex);
++  int (*recursive_mutex_destroy) (__gthread_recursive_mutex_t *__mutex);
++  void (*cond_init_function) (__gthread_cond_t *__cond);
++  int (*cond_broadcast) (__gthread_cond_t *__cond);
++  int (*cond_signal) (__gthread_cond_t *__cond);
++  int (*cond_wait) (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex);
++  int (*cond_timedwait) (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                         const __gthread_time_t *__abs_timeout);
++  int (*cond_wait_recursive) (__gthread_cond_t *__cond,
++                              __gthread_recursive_mutex_t *__mutex);
++  int (*cond_destroy) (__gthread_cond_t* __cond);
++} __gthread_impl_t;
++
++extern __gthread_impl_t __gthread_impl;
++
++int
++__gthread_active_p (void);
++
++int
++__gthread_create (__gthread_t *__threadid, void *(*__func) (void*),
++                  void *__args);
++
++int
++__gthread_join (__gthread_t __threadid, void **__value_ptr);
++
++int
++__gthread_detach (__gthread_t __threadid);
++
++int
++__gthread_equal (__gthread_t __t1, __gthread_t __t2);
++
++__gthread_t
++__gthread_self (void);
++
++int
++__gthread_yield (void);
++
++int
++__gthread_once (__gthread_once_t *__once, void (*__func) (void));
++
++int
++__gthread_key_create (__gthread_key_t *__key, void (*__dtor) (void *));
++
++int
++__gthread_key_delete (__gthread_key_t __key);
++
++void *
++__gthread_getspecific (__gthread_key_t __key);
++
++int
++__gthread_setspecific (__gthread_key_t __key, const void *__ptr);
++
++void
++__gthread_mutex_init_function (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_destroy (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_lock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_trylock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_mutex_unlock (__gthread_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_init_function (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_lock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_trylock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_unlock (__gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_recursive_mutex_destroy (__gthread_recursive_mutex_t *__mutex);
++
++void
++__gthread_cond_init_function (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_broadcast (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_signal (__gthread_cond_t *__cond);
++
++int
++__gthread_cond_wait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex);
++
++int
++__gthread_cond_timedwait (__gthread_cond_t *__cond, __gthread_mutex_t *__mutex,
++                          const __gthread_time_t *__abs_timeout);
++
++int
++__gthread_cond_wait_recursive (__gthread_cond_t *__cond,
++                               __gthread_recursive_mutex_t *__mutex);
++
++int
++__gthread_cond_destroy (__gthread_cond_t* __cond);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* ! _GLIBCXX_GCC_GTHR_DKP_H */
+diff --git a/libgcc/config/rs6000/t-ppccomm b/libgcc/config/rs6000/t-ppccomm
+index fb812d3..7f6669d 100644
+--- a/libgcc/config/rs6000/t-ppccomm
++++ b/libgcc/config/rs6000/t-ppccomm
+@@ -1,4 +1,5 @@
+ LIB2ADD += $(srcdir)/config/rs6000/ibm-ldouble.c \
++	   $(srcdir)/config/rs6000/gthr-dkp.c \
+ 	   $(srcdir)/config/rs6000/tramp.S
+ 
+ # This can't end up in shared libgcc
+diff --git a/libgcc/configure b/libgcc/configure
+index b2f3f87..c6f93f8 100644
+--- a/libgcc/configure
++++ b/libgcc/configure
+@@ -5442,6 +5442,7 @@ tm_file="${tm_file_}"
+ 
+ case $target_thread_file in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
++    dkp)	thread_header=config/rs6000/gthr-dkp.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;
+diff --git a/libgcc/crtstuff.c b/libgcc/crtstuff.c
+index 5e89445..f234745 100644
+--- a/libgcc/crtstuff.c
++++ b/libgcc/crtstuff.c
+@@ -47,6 +47,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
++#define USED_FOR_TARGET
+ 
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,
+diff --git a/libstdc++-v3/configure b/libstdc++-v3/configure
+index ba094be..ac53ee6 100755
+--- a/libstdc++-v3/configure
++++ b/libstdc++-v3/configure
+@@ -15178,6 +15178,7 @@ $as_echo "$target_thread_file" >&6; }
+ 
+ case $target_thread_file in
+     aix)	thread_header=config/rs6000/gthr-aix.h ;;
++    dkp)	thread_header=config/rs6000/gthr-dkp.h ;;
+     dce)	thread_header=config/pa/gthr-dce.h ;;
+     lynx)	thread_header=config/gthr-lynx.h ;;
+     mipssde)	thread_header=config/mips/gthr-mipssde.h ;;

dkppc/patches/gdb-7.11.patch

@@ -1,18 +0,0 @@
-diff -NBaur gdb-7.10/gdb/Makefile.in gdb-7.10-ppc/gdb/Makefile.in
---- gdb-7.10/gdb/Makefile.in	2015-08-28 22:22:07.000000000 +0100
-+++ gdb-7.10-ppc/gdb/Makefile.in	2015-11-09 09:21:13.228003995 +0000
-@@ -2676,10 +2676,10 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+#@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+#@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+#@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+#@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)

dkppc/rules/base_rules

@@ -1,38 +1,4 @@
-#---------------------------------------------------------------------------------
+include $(DEVKITPPC)/base_tools
-# change shell on Snow Leopard
-#---------------------------------------------------------------------------------
-UNAME_S	:=	$(shell uname -s)
-UNAME_R	:=	$(shell uname -r)
-
-ifneq (,$(findstring Darwin,$(UNAME_S)))
-	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
-		export SHELL=/bin/bash
-	endif
-endif
-
-#---------------------------------------------------------------------------------
-# path to tools 
-#---------------------------------------------------------------------------------
-export PORTLIBS	:=	$(DEVKITPRO)/portlibs/ppc
-export PATH	:=	$(DEVKITPPC)/bin:$(PORTLIBS)/bin:$(PATH)
-
-#---------------------------------------------------------------------------------
-# the prefix on the compiler executables
-#---------------------------------------------------------------------------------
-PREFIX	:=	powerpc-eabi-
-
-export AS	:=	$(PREFIX)as
-export CC	:=	$(PREFIX)gcc
-export CXX	:=	$(PREFIX)g++
-export AR	:=	$(PREFIX)ar
-export OBJCOPY	:=	$(PREFIX)objcopy
-
-
-ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
-
-ifneq (,$(ISVC))
-	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
-endif
 
 #---------------------------------------------------------------------------------
 %.a:

dkppc/rules/base_tools

@@ -0,0 +1,37 @@
+#---------------------------------------------------------------------------------
+# change shell on Snow Leopard
+#---------------------------------------------------------------------------------
+UNAME_S	:=	$(shell uname -s)
+UNAME_R	:=	$(shell uname -r)
+
+ifneq (,$(findstring Darwin,$(UNAME_S)))
+	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
+		export SHELL=/bin/bash
+	endif
+endif
+
+#---------------------------------------------------------------------------------
+# path to tools
+#---------------------------------------------------------------------------------
+DEVKITPATH=$(shell echo "$(DEVKITPRO)" | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+
+export PORTLIBS	:=	$(DEVKITPATH)/portlibs/ppc
+export PATH	:=	$(DEVKITPATH)/tools/bin:$(DEVKITPATH)/devkitPPC/bin:$(PORTLIBS)/bin:$(PATH)
+
+#---------------------------------------------------------------------------------
+# the prefix on the compiler executables
+#---------------------------------------------------------------------------------
+PREFIX	:=	powerpc-eabi-
+
+export AS	:=	$(PREFIX)as
+export CC	:=	$(PREFIX)gcc
+export CXX	:=	$(PREFIX)g++
+export AR	:=	$(PREFIX)ar
+export OBJCOPY	:=	$(PREFIX)objcopy
+
+
+ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
+
+ifneq (,$(ISVC))
+	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
+endif

dkppc/scripts/build-crtls.sh

@@ -1,32 +0,0 @@
-#!/bin/bash
-
-export DEVKITPPC=$TOOLPATH/devkitPPC
-export DEVKITPRO=$TOOLPATH
-
-#---------------------------------------------------------------------------------
-# Install and build the gamecube crt and libogc
-#---------------------------------------------------------------------------------
-
-echo "installing linkscripts ..."
-cp $BUILDSCRIPTDIR/dkppc/crtls/*.ld $prefix/$target/lib/
-#---------------------------------------------------------------------------------
-# copy base rulesets
-#---------------------------------------------------------------------------------
-cp $BUILDSCRIPTDIR/dkppc/rules/* $prefix
-
-cd $BUILDDIR/libogc-$LIBOGC_VER
-
-if [ ! -f installed ]; then
-	echo "Building & installing libogc"
-	$MAKE install || { echo "libogc install failed"; exit 1; }
-	touch installed
-fi
-
-cd $BUILDDIR/libfat-$LIBFAT_VER
-
-if [ ! -f installed ]; then
-	echo "Building & installing libfat"
-	$MAKE ogc-install || { echo "libfat install failed"; exit 1; }
-	touch installed
-fi
-

dkppc/scripts/build-gcc.sh

@@ -82,21 +82,25 @@ then
 	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	LDFLAGS_FOR_TARGET="" \
 	../../gcc-$GCC_VER/configure \
-	--enable-languages=c,c++,objc \
+	--enable-languages=c,c++,objc,lto \
-	--enable-lto $plugin_ld \
+	--enable-lto \
 	--with-cpu=750 \
-	--disable-nls --disable-shared --enable-threads --disable-multilib \
+	--disable-nls --disable-shared --enable-threads=dkp --disable-multilib \
 	--disable-win32-registry \
 	--disable-libstdcxx-pch \
 	--disable-libstdcxx-verbose \
+	--enable-libstdcxx-time=yes \
+	--enable-libstdcxx-filesystem-ts \
 	--enable-cxx-flags='-ffunction-sections -fdata-sections' \
 	--target=$target \
 	--with-newlib \
 	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 	--prefix=$prefix\
 	--with-system-zlib\
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 29-1" \
+	--with-bugurl="https://github.com/devkitpro/buildscripts/issues" --with-pkgversion="devkitPPC release 32" \
 	$CROSS_PARAMS \
+	$CROSS_GCC_PARAMS \
+        CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	|| { echo "Error configuring gcc stage 1"; exit 1; }
 	touch configured-gcc
 fi
@@ -123,6 +127,11 @@ cd $target/newlib
 unset CFLAGS
 unset LDFLAGS
 
+OLD_CC=$CC
+OLD_CXX=$CXX
+unset CC
+unset CXX
+
 if [ ! -f configured-newlib ]
 then
 	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
@@ -130,7 +139,6 @@ then
 	--target=$target \
 	--prefix=$prefix \
 	--enable-newlib-mb \
-	--enable-newlib-hw-fp \
 	|| { echo "Error configuring newlib"; exit 1; }
 	touch configured-newlib
 fi
@@ -146,6 +154,9 @@ then
 	touch installed-newlib
 fi
 
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
 #---------------------------------------------------------------------------------
 # build and install the final compiler
 #---------------------------------------------------------------------------------
@@ -168,6 +179,17 @@ fi
 
 rm -fr $prefix/$target/sys-include
 
+#---------------------------------------------------------------------------------
+# Install and build the gamecube crt and libogc
+#---------------------------------------------------------------------------------
+
+echo "installing linkscripts ..."
+cp $BUILDSCRIPTDIR/dkppc/crtls/*.ld $prefix/$target/lib/
+#---------------------------------------------------------------------------------
+# copy base rulesets
+#---------------------------------------------------------------------------------
+cp $BUILDSCRIPTDIR/dkppc/rules/* $prefix
+
 cd $BUILDDIR
 
 #---------------------------------------------------------------------------------
@@ -180,7 +202,8 @@ if [ ! -f configured-gdb ]
 then
 	CFLAGS="$cflags" LDFLAGS="$ldflags" ../../gdb-$GDB_VER/configure \
 	--disable-nls --prefix=$prefix --target=$target --disable-werror \
-	$CROSS_PARAMS || { echo "Error configuring gdb"; exit 1; }
+	$CROSS_PARAMS \
+	$CROSS_GCC_PARAMS || { echo "Error configuring gdb"; exit 1; }
 	touch configured-gdb
 fi
 

dkppc/scripts/build-libs.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+export DEVKITPPC=$TOOLPATH/devkitPPC
+export DEVKITPRO=$TOOLPATH
+
+cd $BUILDDIR/libogc-$LIBOGC_VER
+
+if [ ! -f installed ]; then
+	echo "Building & installing libogc"
+	$MAKE install || { echo "libogc install failed"; exit 1; }
+	touch installed
+fi
+
+cd $BUILDDIR/libfat-$LIBFAT_VER
+
+if [ ! -f installed ]; then
+	echo "Building & installing libfat"
+	$MAKE ogc-install || { echo "libfat install failed"; exit 1; }
+	touch installed
+fi
+

dkppc/scripts/build-tools.sh

@@ -6,7 +6,7 @@ do
 	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
 	cd $BUILDDIR/$dir
 	if [ ! -f configured ]; then
-		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$prefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
+		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$toolsprefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
 		touch configured
 	fi
 	if [ ! -f built ]; then

makedist.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 DATESTRING=$(date +%Y)$(date +%m)$(date +%d)
 cd .. && tar	--exclude=*CVS* --exclude=.svn --exclude=.git --exclude=*.log --exclude=*.bz2 \
-				--exclude=*.gz --exclude=config.sh --exclude=.devkitARM --exclude=.devkitPPC \
+				--exclude=*.gz --exclude=config.sh --exclude=.devkitARM* --exclude=.devkitPPC* \
-				--exclude=.devkitPSP --exclude=.gitignore \
+				--exclude=.devkitA64* --exclude=.gitignore \
 				-cvjf buildscripts-$DATESTRING.tar.bz2 buildscripts

select_toolchain.sh

@@ -19,6 +19,7 @@ do
   echo
   echo "1: devkitARM (gba gp32 ds)"
   echo "2: devkitPPC (gamecube wii)"
+  echo "3: devkitA64 (switch)"
   read VERSION
 
   if [ "$VERSION" -ne 1 -a "$VERSION" -ne 2 -a "$VERSION" -ne 3 ]
@@ -29,24 +30,34 @@ done
 
 case "$VERSION" in
   "1" )
-    GCC_VER=6.3.0
+    GCC_VER=8.1.0
-    BINUTILS_VER=2.27
+    BINUTILS_VER=2.30
-    NEWLIB_VER=2.5.0
+    NEWLIB_VER=3.0.0
-    GDB_VER=7.12
+    GDB_VER=8.0
     basedir='dkarm-eabi'
     package=devkitARM
     target=arm-none-eabi
     toolchain=DEVKITARM
   ;;
   "2" )
-    GCC_VER=6.3.0
+    GCC_VER=8.1.0
-    BINUTILS_VER=2.27
+    BINUTILS_VER=2.30
     MN_BINUTILS_VER=2.17
-    NEWLIB_VER=2.5.0
+    NEWLIB_VER=3.0.0
-    GDB_VER=7.11
+    GDB_VER=8.0.1
     basedir='dkppc'
     package=devkitPPC
     target=powerpc-eabi
     toolchain=DEVKITPPC
   ;;
+  "3" )
+    GCC_VER=8.1.0
+    BINUTILS_VER=2.30
+    NEWLIB_VER=3.0.0
+    GDB_VER=8.0
+    basedir='dka64'
+    package=devkitA64
+    target=aarch64-none-elf
+    toolchain=DEVKITA64
+  ;;
 esac