3dsx.ld: add missing .fini section

Signed-off-by: Dave Murphy <wntrmute@users.sourceforge.net>

.gitignore

@@ -2,3 +2,6 @@ config.sh
 .devkitARM*
 .devkitPPC*
 .devkitPSP*
+*.gz
+*.bz2
+*~

README.TXT

@@ -3,32 +3,25 @@ devkitPro build scripts
 
 This readme will guide you through building devkitARM, devkitPPC or devkitPSP from source using a set of scripts.
 
-To use these scripts under minsys and MinGW you will need some additional packages over and above the base install.
+The windows versions of the toolchains are now cross compiled on linux using mingw-w64
-
-The minsys developer toolkit
-
-http://prdownloads.sourceforge.net/mingw/msysDTK-1.0.1.exe?download
-
-Bison, Flex and Wget from the gnuwin32 project
-
-http://sourceforge.net/projects/gnuwin32/
-
-For devkitPSP a command line subversion client is required to get the PSP SDK http://www.tigris.org
-
 required packages for building on debian/*buntu
 
-sudo apt-get install build-essential autoconf automake bison flex libncurses5-dev libreadline-dev texinfo
+sudo apt-get install build-essential autoconf automake bison flex libncurses5-dev libreadline-dev texinfo pkg-config
 
-for building gcc libgmp, libmpfr and libmpc are required
+For building gcc libgmp, libmpfr and libmpc are required - these are built as static libraries to make packaging simpler.
+If you're building the tools for personal use then the versions packaged by your chosen distro should suffice.
 
 http://gmplib.org/
 http://www.mpfr.org/
 http://www.multiprecision.org/
 
-Some of the tools for devkitARM and devkitPPC also require FreeImage and zlib
+Some of the tools for devkitARM and devkitPPC also require FreeImage, zlib, and libusb. Again these are built as static
+libraries for ease of packaging but you can probably use the versions supplied by your distro.
 
 http://freeimage.sourceforge.net/
 http://www.zlib.net
+http://www.libusb.org
+
  
 Downloading the source packages
 -------------------------------

build-devkit.sh

@@ -1,8 +1,8 @@
 #!/bin/bash
 #---------------------------------------------------------------------------------
 # Build scripts for
-#	devkitARM release 38
+#	devkitARM release 43
-#	devkitPPC release 26
+#	devkitPPC release 27
 #	devkitPSP release 17
 #---------------------------------------------------------------------------------
 
@@ -11,8 +11,8 @@ if [ 1 -eq 1 ] ; then
 	echo "Please use the latest release buildscripts unless advised otherwise by devkitPro staff."
 	echo "http://sourceforge.net/projects/devkitpro/files/buildscripts/"
 	echo
-	echo "The scripts in svn are quite often dependent on things which currently only exist on developer"
+	echo "The scripts in the git repository are quite often dependent on things which currently only exist"
-	echo "machines. This is not a bug, use stable releases."
+	echo "on developer machines. This is not a bug, use stable releases."
 	exit 1
 fi
 
@@ -24,18 +24,20 @@ echo "Patches and improvements are of course welcome, please send these to the p
 echo "https://sourceforge.net/tracker/?group_id=114505&atid=668553"
 echo
 
-LIBOGC_VER=1.8.10
+LIBOGC_VER=1.8.12
 LIBGBA_VER=20090222
-LIBNDS_VER=1.5.5
+LIBNDS_VER=1.5.8
+LIBCTRU_VER=0.1.0
 DEFAULT_ARM7_VER=0.5.24
-DSWIFI_VER=0.3.13
+DSWIFI_VER=0.3.16
 LIBMIRKO_VER=0.9.7
-MAXMOD_VER=1.0.7
+MAXMOD_VER=1.0.9
-FILESYSTEM_VER=0.9.9
+FILESYSTEM_VER=0.9.11
-LIBFAT_VER=1.0.11
+LIBFAT_VER=1.0.12
 PSPSDK_VER=20120404
 GBATOOLS_VER=1.0.0
-GRIT_VER=0.8.10
+DSTOOLS_VER=1.0.0
+GRIT_VER=0.8.12
 NDSTOOL_VER=1.50.1
 GENERAL_TOOLS_VER=1.0.0
 DLDITOOL_VER=1.24.0
@@ -44,6 +46,9 @@ GCDSPSUITE_VER=1.4.0
 ELF2DOL_VER=1.0.0
 WIILOAD_VER=0.5.1
 MMUTIL_VER=1.8.6
+DFU_UTIL_VER=0.7.1
+STLINK_VER=0.5.8
+TOOLS3DS_VER=1.0.0
 
 #---------------------------------------------------------------------------------
 function extract_and_patch {
@@ -60,7 +65,7 @@ function extract_and_patch {
 			echo "invalid archive type"
 			exit 1
 		fi
-		tar $extractflags $SRCDIR/$1-$2$archivetype || { echo "Error extracting "$1; exit 1; }
+		tar $extractflags "$SRCDIR/$1-$2$archivetype" || { echo "Error extracting "$1; exit 1; }
 		touch extracted-$1
 	fi
 	if [[ ! -f patched-$1 && -f $patchdir/$1-$2.patch ]]; then
@@ -109,7 +114,7 @@ else
 	echo "for mingw/msys you must use <drive>:/<install path> or you will have include path problems"
 	echo "this is the top level directory for devkitpro, i.e. e:/devkitPro"
 
-	read INSTALLDIR
+	read -e INSTALLDIR
 	echo
 fi
 
@@ -154,7 +159,7 @@ fi
 if [ "$BUILD_DKPRO_AUTOMATED" != "1" ] ; then
 
 	echo
-	echo 'Ready to install '$package' in '$INSTALLDIR
+	echo 'Ready to install '$package' in '$prefix
 	echo
 	echo 'press return to continue'
 
@@ -191,10 +196,11 @@ archives="binutils-${BINUTILS_VER}.tar.bz2 gcc-${GCC_VER}.tar.bz2 newlib-${NEWLI
 if [ $VERSION -eq 1 ]; then
 	targetarchives="libnds-src-${LIBNDS_VER}.tar.bz2 libgba-src-${LIBGBA_VER}.tar.bz2
 		libmirko-src-${LIBMIRKO_VER}.tar.bz2 dswifi-src-${DSWIFI_VER}.tar.bz2 maxmod-src-${MAXMOD_VER}.tar.bz2
-		default-arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
+		default_arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
-		libfat-src-${LIBFAT_VER}.tar.bz2"
+		libfat-src-${LIBFAT_VER}.tar.bz2 libctru-src-${LIBCTRU_VER}.tar.bz2"
-	hostarchives="gbatools-$GBATOOLS_VER.tar.bz2 grit-$GRIT_VER.tar.bz2 ndstool-$NDSTOOL_VER.tar.bz2
+	hostarchives="gbatools-$GBATOOLS_VER.tar.bz2 dstools-$DSTOOLS_VER.tar.bz2 grit-$GRIT_VER.tar.bz2 ndstool-$NDSTOOL_VER.tar.bz2
-		general-tools-$GENERAL_TOOLS_VER.tar.bz2 dlditool-$DLDITOOL_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2"
+		general-tools-$GENERAL_TOOLS_VER.tar.bz2 dlditool-$DLDITOOL_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2
+		dfu-util-$DFU_UTIL_VER.tar.bz2 stlink-$STLINK_VER.tar.bz2 3dstools-$TOOLS3DS_VER.tar.bz2"
 fi
 
 if [ $VERSION -eq 2 ]; then
@@ -213,7 +219,7 @@ else
 	SRCDIR=`pwd`
 fi
 
-cd $SRCDIR
+cd "$SRCDIR"
 for archive in $archives $targetarchives $hostarchives
 do
 	echo $archive
@@ -238,13 +244,13 @@ do
 	echo $destdir
 	if [ ! -d $destdir ]; then
 		mkdir -p $destdir
-		bzip2 -cd $SRCDIR/$archive | tar -xf - -C $destdir || { echo "Error extracting "$archive; exit 1; }
+		bzip2 -cd "$SRCDIR/$archive" | tar -xf - -C $destdir || { echo "Error extracting "$archive; exit 1; }
 	fi
 done
 
 for archive in $hostarchives
 do
-	tar -xjf $SRCDIR/$archive
+	tar -xjf "$SRCDIR/$archive"
 done
 
 #---------------------------------------------------------------------------------
@@ -254,12 +260,15 @@ if [ -f $scriptdir/build-gcc.sh ]; then . $scriptdir/build-gcc.sh || { echo "Err
 if [ -f $scriptdir/build-tools.sh ]; then . $scriptdir/build-tools.sh || { echo "Error building tools"; exit 1; }; cd $BUILDSCRIPTDIR; fi
 if [ -f $scriptdir/build-crtls.sh ]; then . $scriptdir/build-crtls.sh || { echo "Error building crtls"; exit 1; }; cd $BUILDSCRIPTDIR; fi
 
-if [ "$CROSSBUILD" = "i686-w64-mingw32" ]; then
+if [ ! -z $CROSSBUILD ]; then
 	if [ $VERSION -ne 3 ]; then
-		cp -v 	/opt/i686-w64-mingw32/mingw/lib/FreeImage.dll $prefix/bin
+		cp -v 	$CROSSLIBPATH/FreeImage.dll $prefix/bin
 	fi
-	cp -v	/opt/i686-w64-mingw32/mingw/lib/libstdc++-6.dll \
+	if [ $VERSION -eq 1 ]; then
-		/opt/i686-w64-mingw32/mingw/lib/libgcc_s_sjlj-1.dll \
+		cp -v $CROSSBINPATH/libusb-1.0.dll $prefix/bin
+	fi
+	cp -v	$CROSSLIBPATH/libstdc++-6.dll \
+		$CROSSLIBPATH/libgcc_s_sjlj-1.dll \
 		$prefix/bin
 fi
 

cross-build-i686-w64-mingw32.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
 export CROSSBUILD=i686-w64-mingw32
+export CROSSLIBPATH=/opt/i686-w64-mingw32/mingw/lib
+export CROSSBINPATH=/opt/i686-w64-mingw32/mingw/bin
 export PATH=/opt/i686-w64-mingw32/bin:$PATH
+export PKG_CONFIG_PATH=$CROSSLIBPATH/pkgconfig
+

cross-build-x86_64-w64-mingw32.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+export CROSSBUILD=x86_64-w64-mingw32
+export CROSSLIBPATH=/opt/x86_64-mingw-w64/mingw/lib
+export CROSSBINPATH=/opt/x86_64-mingw-w64/mingw/bin
+export PATH=/opt/x86_64-mingw-w64/bin:$PATH
+export PKG_CONFIG_PATH=$CROSSLIBPATH/pkgconfig
+

dkarm-eabi/crtls/3dsx.ld

@@ -0,0 +1,162 @@
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+
+PHDRS
+{
+	code   PT_LOAD FLAGS(5) /* Read | Execute */;
+	rodata PT_LOAD FLAGS(4) /* Read */;
+	data   PT_LOAD FLAGS(6) /* Read | Write */;
+}
+
+SECTIONS
+{
+	/* =========== CODE section =========== */
+
+	. = 0x100000;
+	__start__ = . ;
+
+	.text ALIGN(0x1000) :
+	{
+		/* .init */
+		KEEP( *(.crt0) )
+		KEEP( *(.init) )
+		. = ALIGN(4);
+
+		/* .text */
+		*(.text)
+		*(.text.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.stub)
+		*(.gnu.warning)
+		*(.gnu.linkonce.t*)
+		. = ALIGN(4);
+
+		/* .fini */
+		KEEP( *(.fini) )
+		. = ALIGN(4);
+	} : code
+
+	/* =========== RODATA section =========== */
+
+	.rodata ALIGN(0x1000) :
+	{
+		*(.rodata)
+		*(.roda)
+		*(.rodata.*)
+		*all.rodata*(*)
+		*(.gnu.linkonce.r*)
+		SORT(CONSTRUCTORS)
+		. = ALIGN(4);
+	} : rodata
+
+	.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } : rodata
+	__exidx_start = .;
+	ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } : rodata
+	__exidx_end = .;
+
+	/* =========== DATA section =========== */
+
+	.data ALIGN(0x1000) :
+	{
+		*(.data)
+		*(.data.*)
+		*(.gnu.linkonce.d*)
+		CONSTRUCTORS
+		. = ALIGN(4);
+	} : data
+
+	.preinit_array ALIGN(4) :
+	{
+		PROVIDE (__preinit_array_start = .);
+		KEEP (*(.preinit_array))
+		PROVIDE (__preinit_array_end = .);
+	} : data
+
+	.init_array ALIGN(4) :
+	{
+		PROVIDE (__init_array_start = .);
+		KEEP (*(SORT(.init_array.*)))
+		KEEP (*(.init_array))
+		PROVIDE (__init_array_end = .);
+	} : data
+
+	.fini_array ALIGN(4) :
+	{
+		PROVIDE (__fini_array_start = .);
+		KEEP (*(.fini_array))
+		KEEP (*(SORT(.fini_array.*)))
+		PROVIDE (__fini_array_end = .);
+	} : data
+
+	.ctors ALIGN(4) :
+	{
+		KEEP (*crtbegin.o(.ctors)) /* MUST be first -- GCC requires it */
+		KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+		KEEP (*(SORT(.ctors.*)))
+		KEEP (*(.ctors))
+	} : data
+
+	.dtors ALIGN(4) :
+	{
+		KEEP (*crtbegin.o(.dtors))
+		KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+		KEEP (*(SORT(.dtors.*)))
+		KEEP (*(.dtors))
+	} : data
+
+	__bss_start__ = .;
+	.bss ALIGN(4) :
+	{
+		*(.dynbss)
+		*(.bss)
+		*(.bss.*)
+		*(.gnu.linkonce.b*)
+		*(COMMON)
+		. = ALIGN(4);
+	} : data
+	__bss_end__ = .;
+
+	__end__ = ABSOLUTE(.) ;
+
+	/* ==================
+	   ==== Metadata ====
+	   ================== */
+
+	/* Discard sections that difficult post-processing */
+	/DISCARD/ : { *(.group .comment .note) }
+
+	/* Stabs debugging sections. */
+	.stab          0 : { *(.stab) }
+	.stabstr       0 : { *(.stabstr) }
+	.stab.excl     0 : { *(.stab.excl) }
+	.stab.exclstr  0 : { *(.stab.exclstr) }
+	.stab.index    0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+
+	/* DWARF debug sections.
+	   Symbols in the DWARF debugging sections are relative to the beginning
+	   of the section so we begin them at 0. */
+
+	/* DWARF 1 */
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+
+	/* GNU DWARF 1 extensions */
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+
+	/* DWARF 1.1 and DWARF 2 */
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+
+	/* DWARF 2 */
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+}

dkarm-eabi/crtls/3dsx.specs

@@ -0,0 +1,8 @@
+%rename link                old_link
+
+*link:
+%(old_link) -T 3dsx.ld%s -d --emit-relocs --use-blx
+
+*startfile:
+3dsx_crt0%O%s crti%O%s crtbegin%O%s
+

dkarm-eabi/crtls/3dsx_crt0.s

@@ -0,0 +1,73 @@
+@---------------------------------------------------------------------------------
+@ 3DS processor selection
+@---------------------------------------------------------------------------------
+	.cpu mpcore
+@---------------------------------------------------------------------------------
+
+@---------------------------------------------------------------------------------
+	.section ".crt0"
+	.global _start, __service_ptr, __apt_appid, __heap_size, __linear_heap_size, __system_arglist, __system_runflags
+@---------------------------------------------------------------------------------
+	.align 2
+	.arm
+@---------------------------------------------------------------------------------
+_start:
+@---------------------------------------------------------------------------------
+	b startup
+	.ascii "_prm"
+__service_ptr:
+	.word 0 @ Pointer to service handle override list -- if non-NULL it is assumed that we have been launched from a homebrew launcher
+__apt_appid:
+	.word 0x300 @ Program APPID
+__heap_size:
+	.word 24*1024*1024 @ Default heap size (24 MiB)
+__linear_heap_size:
+	.word 32*1024*1024 @ Default linear heap size (32 MiB)
+__system_arglist:
+	.word 0 @ Pointer to argument list (argc (u32) followed by that many NULL terminated strings)
+__system_runflags:
+	.word 0 @ Flags to signal runtime restrictions to ctrulib
+startup:
+	@ Save return address
+	mov r4, lr
+
+	@ Clear the BSS section
+	ldr r0, =__bss_start__
+	ldr r1, =__bss_end__
+	sub r1, r1, r0
+	bl  ClearMem
+
+	@ System initialization
+	mov r0, r4
+	bl initSystem
+
+	@ Set up argc/argv arguments for main()
+	ldr r0, =__system_argc
+	ldr r1, =__system_argv
+	ldr r0, [r0]
+	ldr r1, [r1]
+
+	@ Jump to user code
+	ldr r3, =main
+	ldr lr, =__ctru_exit
+	bx  r3
+
+@---------------------------------------------------------------------------------
+@ Clear memory to 0x00 if length != 0
+@  r0 = Start Address
+@  r1 = Length
+@---------------------------------------------------------------------------------
+ClearMem:
+@---------------------------------------------------------------------------------
+	mov  r2, #3     @ Round down to nearest word boundary
+	add  r1, r1, r2 @ Shouldn't be needed
+	bics r1, r1, r2	@ Clear 2 LSB (and set Z)
+	bxeq lr         @ Quit if copy size is 0
+
+	mov	r2, #0
+ClrLoop:
+	stmia r0!, {r2}
+	subs  r1, r1, #4
+	bne   ClrLoop
+
+	bx lr

dkarm-eabi/patches/binutils-2.22.patch

@@ -1,162 +0,0 @@
-diff -Nbaur binutils-2.22/bfd/bfd-in2.h binutils-2.22-arm/bfd/bfd-in2.h
---- binutils-2.22/bfd/bfd-in2.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-arm/bfd/bfd-in2.h	2012-04-01 12:58:20.000000000 +0100
-@@ -38,6 +38,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -308,8 +310,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/bfd-in.h binutils-2.22-arm/bfd/bfd-in.h
---- binutils-2.22/bfd/bfd-in.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-arm/bfd/bfd-in.h	2012-04-01 12:58:20.000000000 +0100
-@@ -31,6 +31,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -301,8 +303,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/config.in binutils-2.22-arm/bfd/config.in
---- binutils-2.22/bfd/config.in	2011-05-12 08:41:40.000000000 +0100
-+++ binutils-2.22-arm/bfd/config.in	2012-04-03 17:35:45.000000000 +0100
-@@ -245,6 +245,9 @@
- /* Define if <sys/procfs.h> has win32_pstatus_t. */
- #undef HAVE_WIN32_PSTATUS_T
- 
-+/* Define to 1 if you have the <windows.h> header file. */
-+#undef HAVE_WINDOWS_H
-+
- /* Define to 1 if you have the <zlib.h> header file. */
- #undef HAVE_ZLIB_H
- 
-diff -Nbaur binutils-2.22/bfd/configure binutils-2.22-arm/bfd/configure
---- binutils-2.22/bfd/configure	2011-11-21 11:55:48.000000000 +0000
-+++ binutils-2.22-arm/bfd/configure	2012-04-03 17:35:45.000000000 +0100
-@@ -13508,6 +13508,22 @@
- 
- fi
- 
-+
-+for ac_header in windows.h dlfcn.h
-+do :
-+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-+eval as_val=\$$as_ac_Header
-+   if test "x$as_val" = x""yes; then :
-+  cat >>confdefs.h <<_ACEOF
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
- $as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
- if test "${gcc_cv_header_string+set}" = set; then :
-diff -Nbaur binutils-2.22/bfd/configure.in binutils-2.22-arm/bfd/configure.in
---- binutils-2.22/bfd/configure.in	2011-11-21 11:55:46.000000000 +0000
-+++ binutils-2.22-arm/bfd/configure.in	2012-04-03 17:35:45.000000000 +0100
-@@ -190,6 +190,9 @@
- GCC_HEADER_STDINT(bfd_stdint.h)
- AC_HEADER_TIME
- AC_HEADER_DIRENT
-+
-+AC_CHECK_HEADERS(windows.h dlfcn.h)
-+
- ACX_HEADER_STRING
- AC_CHECK_FUNCS(fcntl getpagesize setitimer sysconf fdopen getuid getgid fileno)
- AC_CHECK_FUNCS(strtoull)
-diff -Nbaur binutils-2.22/bfd/plugin.c binutils-2.22-arm/bfd/plugin.c
---- binutils-2.22/bfd/plugin.c	2011-07-11 16:03:07.000000000 +0100
-+++ binutils-2.22-arm/bfd/plugin.c	2012-04-03 17:35:45.000000000 +0100
-@@ -25,7 +25,13 @@
- #if BFD_SUPPORTS_PLUGINS
- 
- #include <assert.h>
-+#ifdef HAVE_DLFCN_H
- #include <dlfcn.h>
-+#elif defined (HAVE_WINDOWS_H)
-+#include <windows.h>
-+#else
-+#error Unknown how to handle dynamic-load-libraries.
-+#endif
- #include <stdarg.h>
- #include "plugin-api.h"
- #include "sysdep.h"
-@@ -34,6 +40,37 @@
- #include "libiberty.h"
- #include <dirent.h>
- 
-+#if !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)
-+
-+#define RTLD_NOW 0      /* Dummy value.  */
-+
-+static void *
-+dlopen (const char *file, int mode ATTRIBUTE_UNUSED)
-+{
-+  return LoadLibrary (file);
-+}
-+
-+static void *
-+dlsym (void *handle, const char *name)
-+{
-+  return GetProcAddress (handle, name);
-+}
-+
-+static int ATTRIBUTE_UNUSED
-+dlclose (void *handle)
-+{
-+  FreeLibrary (handle);
-+  return 0;
-+}
-+
-+static const char *
-+dlerror (void)
-+{
-+  return "Unable to load DLL.";
-+}
-+
-+#endif /* !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)  */
-+
- #define bfd_plugin_close_and_cleanup                  _bfd_generic_close_and_cleanup
- #define bfd_plugin_bfd_free_cached_info               _bfd_generic_bfd_free_cached_info
- #define bfd_plugin_new_section_hook                   _bfd_generic_new_section_hook
-diff -Nbaur binutils-2.22/include/opcode/arm.h binutils-2.22-arm/include/opcode/arm.h
---- binutils-2.22/include/opcode/arm.h	2011-05-31 15:12:55.000000000 +0100
-+++ binutils-2.22-arm/include/opcode/arm.h	2012-04-01 12:58:20.000000000 +0100
-@@ -109,7 +109,8 @@
- #define ARM_AEXT_V6KT2  (ARM_AEXT_V6T2 | ARM_EXT_V6K)
- #define ARM_AEXT_V6ZT2  (ARM_AEXT_V6T2 | ARM_EXT_SEC)
- #define ARM_AEXT_V6ZKT2 (ARM_AEXT_V6T2 | ARM_EXT_V6K | ARM_EXT_SEC)
--#define ARM_AEXT_V7_ARM	(ARM_AEXT_V6KT2 | ARM_EXT_V7 | ARM_EXT_BARRIER)
-+#define ARM_AEXT_V7_ARM	(ARM_AEXT_V6KT2 | ARM_EXT_V7 | ARM_EXT_BARRIER \
-+    | ARM_EXT_OS )
- #define ARM_AEXT_V7A	(ARM_AEXT_V7_ARM | ARM_EXT_V7A)
- #define ARM_AEXT_V7R	(ARM_AEXT_V7_ARM | ARM_EXT_V7R | ARM_EXT_DIV)
- #define ARM_AEXT_NOTM \

dkarm-eabi/patches/binutils-2.24.patch

@@ -0,0 +1,13 @@
+diff -Nbaur binutils-2.24/include/opcode/arm.h binutils-2.24-arm/include/opcode/arm.h
+--- binutils-2.24/include/opcode/arm.h	2013-11-26 11:37:33.000000000 +0000
++++ binutils-2.24-arm/include/opcode/arm.h	2014-02-16 19:32:33.000000000 +0000
+@@ -114,7 +114,8 @@
+ #define ARM_AEXT_V6KT2  (ARM_AEXT_V6T2 | ARM_EXT_V6K)
+ #define ARM_AEXT_V6ZT2  (ARM_AEXT_V6T2 | ARM_EXT_SEC)
+ #define ARM_AEXT_V6ZKT2 (ARM_AEXT_V6T2 | ARM_EXT_V6K | ARM_EXT_SEC)
+-#define ARM_AEXT_V7_ARM	(ARM_AEXT_V6KT2 | ARM_EXT_V7 | ARM_EXT_BARRIER)
++#define ARM_AEXT_V7_ARM	(ARM_AEXT_V6KT2 | ARM_EXT_V7 | ARM_EXT_BARRIER \
++    | ARM_EXT_OS )
+ #define ARM_AEXT_V7A	(ARM_AEXT_V7_ARM | ARM_EXT_V7A)
+ #define ARM_AEXT_V7VE	(ARM_AEXT_V7A  | ARM_EXT_DIV | ARM_EXT_ADIV \
+     | ARM_EXT_VIRT | ARM_EXT_SEC | ARM_EXT_MP)

dkarm-eabi/patches/gcc-4.7.0.patch

@@ -1,167 +0,0 @@
-diff -Nbaur gcc-4.7.0/gcc/config/arm/t-arm-elf gcc-4.7.0-arm/gcc/config/arm/t-arm-elf
---- gcc-4.7.0/gcc/config/arm/t-arm-elf	2011-11-02 15:23:48.000000000 +0000
-+++ gcc-4.7.0-arm/gcc/config/arm/t-arm-elf	2012-04-05 20:36:17.000000000 +0100
-@@ -26,22 +26,44 @@
- #MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
- #MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
- 
--#MULTILIB_OPTIONS      += march=armv7
--#MULTILIB_DIRNAMES     += thumb2
--#MULTILIB_EXCEPTIONS   += march=armv7* marm/*march=armv7*
--#MULTILIB_MATCHES      += march?armv7=march?armv7-a
--#MULTILIB_MATCHES      += march?armv7=march?armv7-r
--#MULTILIB_MATCHES      += march?armv7=march?armv7-m
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-a8
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-r4
--#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-m3
-+#mfloat-abi=hard|mfpu=fpv4-sp-d16
-+
-+MULTILIB_OPTIONS      += march=armv7/march=armv6-m/mcpu=cortex-m4
-+MULTILIB_DIRNAMES     += thumb2 armv6-m cortex-m4
-+MULTILIB_EXCEPTIONS   += march=armv7* marm/*march=armv7*
-+MULTILIB_EXCEPTIONS   += march=armv6-m* marm/*march=armv6-m*
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* marm/*mcpu=cortex-m4*
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* mthumb/mcpu=cortex-m4
-+MULTILIB_EXCEPTIONS   += mcpu=cortex-m4* mthumb/mcpu=cortex-m4/mbig-endian
-+MULTILIB_MATCHES      += march?armv7=march?armv7-a
-+MULTILIB_MATCHES      += march?armv7=march?armv7-r
-+MULTILIB_MATCHES      += march?armv7=march?armv7-m
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-a8
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-r4
-+MULTILIB_MATCHES      += march?armv7=mcpu?cortex-m3
-+MULTILIB_MATCHES      += march?armv6-m=mcpu?cortex-m0
-+MULTILIB_MATCHES      += march?armv6-m=mcpu?cortex-m1
-+
-+MULTILIB_OPTIONS      += mfloat-abi=hard mfpu=fpv4-sp-d16
-+MULTILIB_DIRNAMES     += float-abi-hard fpuv4-sp-d16
-+MULTILIB_EXCEPTIONS   += mfloat* marm/mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb*march=armv6-m*mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb*march=armv7*mfloat*
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mcpu=cortex-m4/mfloat-abi=hard
-+MULTILIB_EXCEPTIONS   += mfloat* mthumb/mcpu=cortex-m4/mfloat-abi=hard/mbig-endian
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb*march=armv6-m*mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb*march=armv7*mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb/mcpu=cortex-m4/mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* mthumb/mfpu*
-+MULTILIB_EXCEPTIONS   += mfpu* marm/mfpu*
- 
- # Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
- # express that here?  Also, we really need architecture v5e or later
- # (mcrr etc).
--MULTILIB_OPTIONS       += mfloat-abi=hard
--MULTILIB_DIRNAMES      += fpu
--MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
-+#MULTILIB_OPTIONS       += mfloat-abi=hard
-+#MULTILIB_DIRNAMES      += fpu
-+#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
- 
-@@ -49,9 +71,9 @@
- # MULTILIB_DIRNAMES   += ep9312
- # MULTILIB_EXCEPTIONS += *mthumb/*mcpu=ep9312*
- # 	
--# MULTILIB_OPTIONS     += mlittle-endian/mbig-endian
--# MULTILIB_DIRNAMES    += le be
--# MULTILIB_MATCHES     += mbig-endian=mbe mlittle-endian=mle
-+MULTILIB_OPTIONS     += mlittle-endian/mbig-endian
-+MULTILIB_DIRNAMES    += le be
-+MULTILIB_MATCHES     += mbig-endian=mbe mlittle-endian=mle
- # 
- # MULTILIB_OPTIONS    += mfloat-abi=hard/mfloat-abi=soft
- # MULTILIB_DIRNAMES   += fpu soft
-diff -Nbaur gcc-4.7.0/gcc/config/arm/unknown-elf.h gcc-4.7.0-arm/gcc/config/arm/unknown-elf.h
---- gcc-4.7.0/gcc/config/arm/unknown-elf.h	2011-03-31 13:13:13.000000000 +0100
-+++ gcc-4.7.0-arm/gcc/config/arm/unknown-elf.h	2012-04-05 20:36:17.000000000 +0100
-@@ -94,4 +94,4 @@
-    udivmoddi4, which will depend on the exception unwind routines,
-    which will depend on abort, which is defined in libc.  */ 
- #undef LINK_GCC_C_SEQUENCE_SPEC
--#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
-+#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
-diff -Nbaur gcc-4.7.0/gcc/gcc.c gcc-4.7.0-arm/gcc/gcc.c
---- gcc-4.7.0/gcc/gcc.c	2012-02-28 17:31:38.000000000 +0000
-+++ gcc-4.7.0-arm/gcc/gcc.c	2012-04-05 20:36:17.000000000 +0100
-@@ -548,6 +548,11 @@
- #endif
- #endif
- 
-+#ifndef LIBGLOSS_SPEC
-+# define LIBGLOSS_SPEC "-lsysbase"
-+#endif
-+
-+
- /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
- #ifndef STARTFILE_SPEC
- #define STARTFILE_SPEC  \
-@@ -717,6 +722,7 @@
- static const char *mflib_spec = MFLIB_SPEC;
- static const char *link_gomp_spec = "";
- static const char *libgcc_spec = LIBGCC_SPEC;
-+static const char *libgloss_spec = LIBGLOSS_SPEC;
- static const char *endfile_spec = ENDFILE_SPEC;
- static const char *startfile_spec = STARTFILE_SPEC;
- static const char *linker_name_spec = LINKER_NAME;
-@@ -1201,6 +1207,7 @@
-   INIT_STATIC_SPEC ("mflib",			&mflib_spec),
-   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
-   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
-+  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
-   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
-   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
-   INIT_STATIC_SPEC ("version",			&compiler_version),
-diff -Nbaur gcc-4.7.0/libcpp/Makefile.in gcc-4.7.0-arm/libcpp/Makefile.in
---- gcc-4.7.0/libcpp/Makefile.in	2012-03-22 07:37:39.000000000 +0000
-+++ gcc-4.7.0-arm/libcpp/Makefile.in	2012-04-05 20:36:17.000000000 +0100
-@@ -214,8 +214,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -Nbaur gcc-4.7.0/libgcc/crtstuff.c gcc-4.7.0-arm/libgcc/crtstuff.c
---- gcc-4.7.0/libgcc/crtstuff.c	2011-12-06 21:35:41.000000000 +0000
-+++ gcc-4.7.0-arm/libgcc/crtstuff.c	2012-04-05 20:36:50.000000000 +0100
-@@ -49,7 +49,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
--
-+#define USED_FOR_TARGET
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
-diff -Nbaur gcc-4.7.0/libgcc/Makefile.in gcc-4.7.0-arm/libgcc/Makefile.in
---- gcc-4.7.0/libgcc/Makefile.in	2011-11-22 03:01:02.000000000 +0000
-+++ gcc-4.7.0-arm/libgcc/Makefile.in	2012-04-05 20:36:17.000000000 +0100
-@@ -500,14 +500,14 @@
- lib2-divmod-o = $(patsubst %,%$(objext),$(LIB2_DIVMOD_FUNCS))
- $(lib2-divmod-o): %$(objext): $(srcdir)/libgcc2.c
- 	$(gcc_compile) -DL$* -c $< \
--	  -fexceptions -fnon-call-exceptions $(vis_hide)
-+	  -fno-exceptions -fnon-call-exceptions $(vis_hide)
- libgcc-objects += $(lib2-divmod-o)
- 
- ifeq ($(enable_shared),yes)
- lib2-divmod-s-o = $(patsubst %,%_s$(objext),$(LIB2_DIVMOD_FUNCS))
- $(lib2-divmod-s-o): %_s$(objext): $(srcdir)/libgcc2.c
- 	$(gcc_s_compile) -DL$* -c $< \
--	  -fexceptions -fnon-call-exceptions
-+	  -fno-exceptions -fnon-call-exceptions
- libgcc-s-objects += $(lib2-divmod-s-o)
- endif
- 
-@@ -810,7 +810,7 @@
- # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
- # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
- 
--c_flags := -fexceptions
-+c_flags := -fno-exceptions
- 
- ifeq ($(enable_shared),yes)
- 

dkarm-eabi/patches/gdb-7.7.1.patch

@@ -1,25 +1,7 @@
-diff -Nbaur gdb-7.4/gdb/Makefile.in gdb-7.4-arm/gdb/Makefile.in
+diff -Nbaur gdb-7.7.1/gdb/Makefile.in gdb-7.7.1-arm/gdb/Makefile.in
---- gdb-7.4/gdb/Makefile.in	2012-01-06 04:43:01.000000000 +0000
+--- gdb-7.7.1/gdb/Makefile.in	2014-05-05 22:51:24.000000000 +0100
-+++ gdb-7.4-arm/gdb/Makefile.in	2012-02-28 03:07:12.000000000 +0000
++++ gdb-7.7.1-arm/gdb/Makefile.in	2014-05-18 17:05:16.105567001 +0100
-@@ -2195,10 +2195,10 @@
+@@ -2307,10 +2307,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+#@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+#@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+#@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+#@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.4/sim/common/Make-common.in gdb-7.4-arm/sim/common/Make-common.in
---- gdb-7.4/sim/common/Make-common.in	2012-01-06 04:54:38.000000000 +0000
-+++ gdb-7.4-arm/sim/common/Make-common.in	2012-02-28 03:07:41.000000000 +0000
-@@ -417,10 +417,7 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
  # not atomically write the dependency output file.
@@ -28,6 +10,23 @@ diff -Nbaur gdb-7.4/sim/common/Make-common.in gdb-7.4-arm/sim/common/Make-common
 -@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
 -@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
 +@GMAKE_TRUE@override COMPILE.post = -c -o $@
++@GMAKE_TRUE@override POSTCOMPILE =
+ @GMAKE_TRUE@else
+ @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
+ @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
+diff -Nbaur gdb-7.7.1/sim/common/Make-common.in gdb-7.7.1-arm/sim/common/Make-common.in
+--- gdb-7.7.1/sim/common/Make-common.in	2014-01-08 09:23:36.000000000 +0000
++++ gdb-7.7.1-arm/sim/common/Make-common.in	2014-05-18 17:05:16.105567001 +0100
+@@ -415,10 +415,8 @@
+ # Note that we put the dependencies into a .Tpo file, then move them
+ # into place if the compile succeeds.  We need this because gcc does
+ # not atomically write the dependency output file.
+-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
+-@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
+-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
+-@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
++@GMAKE_TRUE@override COMPILE.post = -c -o $@
++@GMAKE_TRUE@override POSTCOMPILE =
  @GMAKE_TRUE@else
  @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
  @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)

dkarm-eabi/rules/3ds_rules

@@ -0,0 +1,39 @@
+ifeq ($(strip $(DEVKITPRO)),)
+$(error "Please set DEVKITPRO in your environment. export DEVKITPRO=<path to>devkitPro)
+endif
+
+include $(DEVKITARM)/base_rules
+
+CTRULIB	:=	$(DEVKITPRO)/libctru
+
+ifeq ($(strip $(APP_TITLE)),)
+APP_TITLE	:=	$(notdir $(OUTPUT))
+endif
+
+ifeq ($(strip $(APP_DESCRIPTION)),)
+APP_DESCRIPTION	:=	Built with devkitARM & ctrulib
+endif
+
+ifeq ($(strip $(APP_AUTHOR)),)
+APP_AUTHOR	:=	Unspecified Author
+endif
+
+ifeq ($(strip $(APP_ICON)),)
+APP_ICON	:=	$(CTRULIB)/default_icon.png
+endif
+
+#---------------------------------------------------------------------------------
+%.smdh: $(APP_ICON) $(MAKEFILE_LIST)
+	@smdhtool --create "$(APP_TITLE)" "$(APP_DESCRIPTION)" "$(APP_AUTHOR)" $(APP_ICON) $@
+	@echo built ... $(notdir $@)
+
+#---------------------------------------------------------------------------------
+%.3dsx: %.elf
+	@3dsxtool $< $@
+	@echo built ... $(notdir $@)
+
+#---------------------------------------------------------------------------------
+%.elf:
+	@echo linking $(notdir $@)
+	@$(LD) $(LDFLAGS) $(OFILES) $(LIBPATHS) $(LIBS) -o $@
+	@$(NM) -CSn $@ > $(notdir $*.lst)

dkarm-eabi/rules/base_rules

@@ -1,36 +1,11 @@
-#---------------------------------------------------------------------------------
+include $(DEVKITARM)/base_tools
-# change shell on Snow Leopard
-#---------------------------------------------------------------------------------
-UNAME_S	:=	$(shell uname -s)
-UNAME_R	:=	$(shell uname -r)
 
-ifneq (,$(findstring Darwin,$(UNAME_S)))
-	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
-		export SHELL=/bin/bash
-	endif
-endif
 #---------------------------------------------------------------------------------
-# path to tools
+# add portlibs path
 #---------------------------------------------------------------------------------
 export PORTLIBS	:=	$(DEVKITPRO)/portlibs/arm
-export PATH	:=	$(DEVKITARM)/bin:$(PORTLIBS)/bin:$(PATH)
+export PATH	:=	$(PORTLIBS)/bin:$(PATH)
 
-#---------------------------------------------------------------------------------
-# the prefix on the compiler executables
-#---------------------------------------------------------------------------------
-PREFIX		:=	arm-eabi-
-
-export CC	:=	$(PREFIX)gcc
-export CXX	:=	$(PREFIX)g++
-export AS	:=	$(PREFIX)as
-export AR	:=	$(PREFIX)ar
-export OBJCOPY	:=	$(PREFIX)objcopy
-
-ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
-
-ifneq (,$(ISVC))
-	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
-endif
 
 #---------------------------------------------------------------------------------
 %.a:

dkarm-eabi/rules/base_tools

@@ -0,0 +1,34 @@
+#---------------------------------------------------------------------------------
+# change shell on Snow Leopard
+#---------------------------------------------------------------------------------
+UNAME_S	:=	$(shell uname -s)
+UNAME_R	:=	$(shell uname -r)
+
+ifneq (,$(findstring Darwin,$(UNAME_S)))
+	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
+		export SHELL=/bin/bash
+	endif
+endif
+#---------------------------------------------------------------------------------
+# path to tools
+#---------------------------------------------------------------------------------
+export PATH	:=	$(DEVKITARM)/bin:$(PATH)
+
+#---------------------------------------------------------------------------------
+# the prefix on the compiler executables
+#---------------------------------------------------------------------------------
+PREFIX		:=	arm-none-eabi-
+
+export CC	:=	$(PREFIX)gcc
+export CXX	:=	$(PREFIX)g++
+export AS	:=	$(PREFIX)as
+export AR	:=	$(PREFIX)ar
+export OBJCOPY	:=	$(PREFIX)objcopy
+export STRIP	:=	$(PREFIX)strip
+export NM	:=	$(PREFIX)nm
+
+ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
+
+ifneq (,$(ISVC))
+	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
+endif

dkarm-eabi/rules/ds_rules

@@ -11,11 +11,11 @@ GAME_TITLE	:=	$(notdir $(OUTPUT))
 endif
 
 ifeq ($(strip $(GAME_SUBTITLE1)),)
-GAME_SUBTITLE1	:=	www.devkitpro.org
+GAME_SUBTITLE1	:=	built with devkitARM
 endif
 
 ifeq ($(strip $(GAME_SUBTITLE2)),)
-GAME_SUBTITLE2	:=	www.drunkencoders.com
+GAME_SUBTITLE2	:=	http://devkitpro.org
 endif
 
 ifeq ($(strip $(GAME_ICON)),)

dkarm-eabi/scripts/build-crtls.sh

@@ -12,8 +12,8 @@ cp -v $BUILDSCRIPTDIR/dkarm-eabi/rules/* $prefix
 # Install and build the gba crt
 #---------------------------------------------------------------------------------
 
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/arm-eabi/lib/
+cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/$target/lib/
-cd $prefix/arm-eabi/lib/
+cd $prefix/$target/lib/
 $MAKE CRT=gba
 $MAKE CRT=gp32
 $MAKE CRT=er
@@ -21,12 +21,25 @@ $MAKE CRT=gp32_gpsdk
 $MAKE CRT=ds_arm7
 $MAKE CRT=ds_arm9
 $MAKE CRT=ds_cart
+$MAKE CRT=3dsx
+
+cd $BUILDDIR/libgba-$LIBGBA_VER
+$MAKE || { echo "error building libgba"; exit 1; }
+$MAKE install || { echo "error installing libgba"; exit 1; }
 
 cd $BUILDDIR/libnds-$LIBNDS_VER
 $MAKE || { echo "error building libnds"; exit 1; }
 $MAKE install || { echo "error installing libnds"; exit 1; }
 
-cd $BUILDDIR/default-arm7-$DEFAULT_ARM7_VER
+cd $BUILDDIR/dswifi-$DSWIFI_VER
+$MAKE || { echo "error building dswifi"; exit 1; }
+$MAKE install || { echo "error installing dswifi"; exit 1; }
+
+cd $BUILDDIR/maxmod-$MAXMOD_VER
+$MAKE || { echo "error building maxmod"; exit 1; }
+$MAKE install || { echo "error installing maxmod"; exit 1; }
+
+cd $BUILDDIR/default_arm7-$DEFAULT_ARM7_VER
 $MAKE || { echo "error building default arm7"; exit 1; }
 $MAKE install || { echo "error installing default arm7"; exit 1; }
 
@@ -34,10 +47,6 @@ cd $BUILDDIR/libfat-$LIBFAT_VER
 $MAKE nds-install || { echo "error building nds libfat"; exit 1; }
 $MAKE gba-install || { echo "error installing gba libfat"; exit 1; }
 
-cd $BUILDDIR/maxmod-$MAXMOD_VER
-$MAKE || { echo "error building maxmod"; exit 1; }
-$MAKE install || { echo "error installing maxmod"; exit 1; }
-
 cd $BUILDDIR/libmirko-$LIBMIRKO_VER
 $MAKE || { echo "error building libmirko"; exit 1; }
 $MAKE install || { echo "error installing libmirko"; exit 1; }
@@ -45,3 +54,8 @@ $MAKE install || { echo "error installing libmirko"; exit 1; }
 cd $BUILDDIR/libfilesystem-$FILESYSTEM_VER
 $MAKE || { echo "error building libfilesystem"; exit 1; }
 $MAKE install || { echo "error installing libfilesystem"; exit 1; }
+
+cd $BUILDDIR/libctru-$LIBCTRU_VER
+$MAKE || { echo "error building libctru"; exit 1; }
+$MAKE install || { echo "error installing libctru"; exit 1; }
+

dkarm-eabi/scripts/build-gcc.sh

@@ -34,13 +34,14 @@ cd $BUILDDIR
 #---------------------------------------------------------------------------------
 # build and install just the c compiler
 #---------------------------------------------------------------------------------
-mkdir -p $target/gcc-stage1
+mkdir -p $target/gcc
-cd $target/gcc-stage1
+cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
+	CFLAGS="$cflags" CXXFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" CXXFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
 		--enable-languages=c,c++,objc,obj-c++ \
+		--with-gnu-as --with-gnu-ld --with-gcc \
 		--with-march=armv4t\
 		--enable-poison-system-directories \
 		--enable-interwork --enable-multilib \
@@ -53,7 +54,7 @@ then
 		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 		--prefix=$prefix \
 		--enable-lto $plugin_ld\
-		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 39" \
+		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 43" \
 		$CROSS_PARAMS \
 		|| { echo "Error configuring gcc"; exit 1; }
 	touch configured-gcc
@@ -87,6 +88,8 @@ then
 	--disable-newlib-supplied-syscalls \
 	--enable-newlib-mb \
 	--enable-newlib-io-long-long \
+	--enable-newlib-io-c99-formats \
+	--enable-newlib-io-pos-args \
 	--target=$target \
 	--prefix=$prefix \
 	|| { echo "Error configuring newlib"; exit 1; }

dkppc/patches/binutils-2.22.patch

@@ -1,149 +0,0 @@
-diff -Nbaur binutils-2.22/bfd/bfd-in2.h binutils-2.22-ppc/bfd/bfd-in2.h
---- binutils-2.22/bfd/bfd-in2.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-ppc/bfd/bfd-in2.h	2012-04-03 15:06:10.000000000 +0100
-@@ -38,6 +38,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -308,8 +310,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/bfd-in.h binutils-2.22-ppc/bfd/bfd-in.h
---- binutils-2.22/bfd/bfd-in.h	2011-09-16 02:15:18.000000000 +0100
-+++ binutils-2.22-ppc/bfd/bfd-in.h	2012-04-03 15:06:10.000000000 +0100
-@@ -31,6 +31,8 @@
- 
- #include "ansidecl.h"
- #include "symcat.h"
-+#include <sys/stat.h>
-+
- #if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
- #ifndef SABER
- /* This hack is to avoid a problem with some strict ANSI C preprocessors.
-@@ -301,8 +303,6 @@
-    && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE		\
-    && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
- 
--/* Forward define.  */
--struct stat;
- 
- typedef enum bfd_print_symbol
- {
-diff -Nbaur binutils-2.22/bfd/config.in binutils-2.22-ppc/bfd/config.in
---- binutils-2.22/bfd/config.in	2011-05-12 08:41:40.000000000 +0100
-+++ binutils-2.22-ppc/bfd/config.in	2012-04-03 14:50:51.000000000 +0100
-@@ -245,6 +245,9 @@
- /* Define if <sys/procfs.h> has win32_pstatus_t. */
- #undef HAVE_WIN32_PSTATUS_T
- 
-+/* Define to 1 if you have the <windows.h> header file. */
-+#undef HAVE_WINDOWS_H
-+
- /* Define to 1 if you have the <zlib.h> header file. */
- #undef HAVE_ZLIB_H
- 
-diff -Nbaur binutils-2.22/bfd/configure binutils-2.22-ppc/bfd/configure
---- binutils-2.22/bfd/configure	2011-11-21 11:55:48.000000000 +0000
-+++ binutils-2.22-ppc/bfd/configure	2012-04-03 14:50:59.000000000 +0100
-@@ -13508,6 +13508,22 @@
- 
- fi
- 
-+
-+for ac_header in windows.h dlfcn.h
-+do :
-+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-+eval as_val=\$$as_ac_Header
-+   if test "x$as_val" = x""yes; then :
-+  cat >>confdefs.h <<_ACEOF
-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
- $as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
- if test "${gcc_cv_header_string+set}" = set; then :
-diff -Nbaur binutils-2.22/bfd/configure.in binutils-2.22-ppc/bfd/configure.in
---- binutils-2.22/bfd/configure.in	2011-11-21 11:55:46.000000000 +0000
-+++ binutils-2.22-ppc/bfd/configure.in	2012-04-03 14:51:23.000000000 +0100
-@@ -190,6 +190,9 @@
- GCC_HEADER_STDINT(bfd_stdint.h)
- AC_HEADER_TIME
- AC_HEADER_DIRENT
-+
-+AC_CHECK_HEADERS(windows.h dlfcn.h)
-+
- ACX_HEADER_STRING
- AC_CHECK_FUNCS(fcntl getpagesize setitimer sysconf fdopen getuid getgid fileno)
- AC_CHECK_FUNCS(strtoull)
-diff -Nbaur binutils-2.22/bfd/plugin.c binutils-2.22-ppc/bfd/plugin.c
---- binutils-2.22/bfd/plugin.c	2011-07-11 16:03:07.000000000 +0100
-+++ binutils-2.22-ppc/bfd/plugin.c	2012-04-03 14:51:32.000000000 +0100
-@@ -25,7 +25,13 @@
- #if BFD_SUPPORTS_PLUGINS
- 
- #include <assert.h>
-+#ifdef HAVE_DLFCN_H
- #include <dlfcn.h>
-+#elif defined (HAVE_WINDOWS_H)
-+#include <windows.h>
-+#else
-+#error Unknown how to handle dynamic-load-libraries.
-+#endif
- #include <stdarg.h>
- #include "plugin-api.h"
- #include "sysdep.h"
-@@ -34,6 +40,37 @@
- #include "libiberty.h"
- #include <dirent.h>
- 
-+#if !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)
-+
-+#define RTLD_NOW 0      /* Dummy value.  */
-+
-+static void *
-+dlopen (const char *file, int mode ATTRIBUTE_UNUSED)
-+{
-+  return LoadLibrary (file);
-+}
-+
-+static void *
-+dlsym (void *handle, const char *name)
-+{
-+  return GetProcAddress (handle, name);
-+}
-+
-+static int ATTRIBUTE_UNUSED
-+dlclose (void *handle)
-+{
-+  FreeLibrary (handle);
-+  return 0;
-+}
-+
-+static const char *
-+dlerror (void)
-+{
-+  return "Unable to load DLL.";
-+}
-+
-+#endif /* !defined (HAVE_DLFCN_H) && defined (HAVE_WINDOWS_H)  */
-+
- #define bfd_plugin_close_and_cleanup                  _bfd_generic_close_and_cleanup
- #define bfd_plugin_bfd_free_cached_info               _bfd_generic_bfd_free_cached_info
- #define bfd_plugin_new_section_hook                   _bfd_generic_new_section_hook

dkppc/patches/binutils-2.24.patch

@@ -0,0 +1,12 @@
+diff -Nbaur binutils-2.24/opcodes/ppc-opc.c binutils-2.24-ppc/opcodes/ppc-opc.c
+--- binutils-2.24/opcodes/ppc-opc.c	2013-11-04 15:33:40.000000000 +0000
++++ binutils-2.24-ppc/opcodes/ppc-opc.c	2014-04-01 14:22:06.000000000 +0100
+@@ -2735,7 +2735,7 @@
+ #define MFDEC1	PPC_OPCODE_POWER
+ #define MFDEC2	PPC_OPCODE_PPC | PPC_OPCODE_601 | PPC_OPCODE_BOOKE | PPC_OPCODE_TITAN
+ #define BOOKE	PPC_OPCODE_BOOKE
+-#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_PPCPS | PPC_OPCODE_EFS | PPC_OPCODE_VLE
++#define NO371	PPC_OPCODE_BOOKE | PPC_OPCODE_EFS | PPC_OPCODE_VLE
+ #define PPCE300 PPC_OPCODE_E300
+ #define PPCSPE	PPC_OPCODE_SPE | PPC_OPCODE_VLE
+ #define PPCISEL PPC_OPCODE_ISEL | PPC_OPCODE_VLE

dkppc/patches/gcc-4.8.2.patch

@@ -1,7 +1,7 @@
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/rs6000.h gcc-4.6.3-ppc/gcc/config/rs6000/rs6000.h
+diff -Nbaur gcc-4.8.2/gcc/config/rs6000/rs6000.h gcc-4.8.2-ppc/gcc/config/rs6000/rs6000.h
---- gcc-4.6.3/gcc/config/rs6000/rs6000.h	2011-07-27 19:17:15.000000000 +0100
+--- gcc-4.8.2/gcc/config/rs6000/rs6000.h	2013-06-19 02:18:38.000000000 +0100
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/rs6000.h	2012-04-21 22:54:04.000000000 +0100
++++ gcc-4.8.2-ppc/gcc/config/rs6000/rs6000.h	2014-04-01 14:13:11.000000000 +0100
-@@ -200,6 +200,7 @@
+@@ -195,6 +195,7 @@
    { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
    SUBTARGET_EXTRA_SPECS
  
@@ -9,7 +9,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/rs6000.h gcc-4.6.3-ppc/gcc/config/rs6000
  /* -mcpu=native handling only makes sense with compiler running on
     an PowerPC chip.  If changing this condition, also change
     the condition in driver-rs6000.c.  */
-@@ -214,6 +215,8 @@
+@@ -209,6 +210,8 @@
  #else
  #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
  #endif
@@ -18,10 +18,10 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/rs6000.h gcc-4.6.3-ppc/gcc/config/rs6000
  
  #ifndef CC1_CPU_SPEC
  #ifdef HAVE_LOCAL_CPU_DETECT
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.h
+diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.h gcc-4.8.2-ppc/gcc/config/rs6000/sysv4.h
---- gcc-4.6.3/gcc/config/rs6000/sysv4.h	2011-03-07 07:50:23.000000000 +0000
+--- gcc-4.8.2/gcc/config/rs6000/sysv4.h	2013-06-19 02:18:38.000000000 +0100
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.h	2012-04-21 22:54:04.000000000 +0100
++++ gcc-4.8.2-ppc/gcc/config/rs6000/sysv4.h	2014-04-01 14:13:11.000000000 +0100
-@@ -603,7 +603,11 @@
+@@ -570,7 +570,11 @@
  
  /* Default starting address if specified.  */
  #define LINK_START_SPEC "\
@@ -34,7 +34,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    myellowknife : %(link_start_yellowknife) ; \
    mmvme        : %(link_start_mvme)        ; \
    msim         : %(link_start_sim)         ; \
-@@ -641,7 +645,8 @@
+@@ -604,7 +608,8 @@
  
  /* Any specific OS flags.  */
  #define LINK_OS_SPEC "\
@@ -44,7 +44,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    myellowknife : %(link_os_yellowknife) ; \
    mmvme        : %(link_os_mvme)        ; \
    msim         : %(link_os_sim)         ; \
-@@ -660,7 +665,10 @@
+@@ -622,7 +627,10 @@
  /* Override rs6000.h definition.  */
  #undef	CPP_SPEC
  #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
@@ -56,7 +56,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    myellowknife : %(cpp_os_yellowknife) ; \
    mmvme        : %(cpp_os_mvme)        ; \
    msim         : %(cpp_os_sim)         ; \
-@@ -675,7 +683,10 @@
+@@ -636,7 +644,10 @@
  
  #undef	STARTFILE_SPEC
  #define	STARTFILE_SPEC "\
@@ -68,7 +68,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    myellowknife : %(startfile_yellowknife) ; \
    mmvme        : %(startfile_mvme)        ; \
    msim         : %(startfile_sim)         ; \
-@@ -686,11 +697,12 @@
+@@ -646,11 +657,12 @@
    mcall-openbsd: %(startfile_openbsd)     ; \
                 : %(startfile_default)     }"
  
@@ -83,7 +83,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    myellowknife : %(lib_yellowknife) ; \
    mmvme        : %(lib_mvme)        ; \
    msim         : %(lib_sim)         ; \
-@@ -701,11 +713,12 @@
+@@ -660,11 +672,12 @@
    mcall-openbsd: %(lib_openbsd)     ; \
                 : %(lib_default)     }"
  
@@ -98,7 +98,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    myellowknife : %(endfile_yellowknife) ; \
    mmvme        : %(endfile_mvme)        ; \
    msim         : %(endfile_sim)         ; \
-@@ -722,16 +735,27 @@
+@@ -680,16 +693,27 @@
  
  /* Motorola ADS support.  */
  #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
@@ -126,7 +126,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
  
  /* Motorola Yellowknife support.  */
  #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -926,6 +950,7 @@
+@@ -859,6 +883,7 @@
  #undef	SUBTARGET_EXTRA_SPECS
  #define	SUBTARGET_EXTRA_SPECS						\
    { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
@@ -134,7 +134,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    { "lib_ads",			LIB_ADS_SPEC },				\
    { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
    { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -936,6 +961,7 @@
+@@ -868,6 +893,7 @@
    { "lib_netbsd",		LIB_NETBSD_SPEC },			\
    { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
    { "lib_default",		LIB_DEFAULT_SPEC },			\
@@ -142,7 +142,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    { "startfile_ads",		STARTFILE_ADS_SPEC },			\
    { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
    { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -946,6 +972,7 @@
+@@ -877,6 +903,7 @@
    { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
    { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
    { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
@@ -150,7 +150,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    { "endfile_ads",		ENDFILE_ADS_SPEC },			\
    { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
    { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -959,7 +986,11 @@
+@@ -889,7 +916,11 @@
    { "link_shlib",		LINK_SHLIB_SPEC },			\
    { "link_target",		LINK_TARGET_SPEC },			\
    { "link_start",		LINK_START_SPEC },			\
@@ -162,7 +162,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
    { "link_start_mvme",		LINK_START_MVME_SPEC },			\
    { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -970,6 +1001,7 @@
+@@ -899,6 +930,7 @@
    { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
    { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
    { "link_os",			LINK_OS_SPEC },				\
@@ -170,7 +170,7 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    { "link_os_ads",		LINK_OS_ADS_SPEC },			\
    { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
    { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -984,6 +1016,9 @@
+@@ -912,6 +944,9 @@
    { "cc1_endian_little",	CC1_ENDIAN_LITTLE_SPEC },		\
    { "cc1_endian_default",	CC1_ENDIAN_DEFAULT_SPEC },		\
    { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
@@ -180,10 +180,10 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.h gcc-4.6.3-ppc/gcc/config/rs6000/
    { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
    { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
    { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.opt gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.opt
+diff -Nbaur gcc-4.8.2/gcc/config/rs6000/sysv4.opt gcc-4.8.2-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-4.6.3/gcc/config/rs6000/sysv4.opt	2011-01-03 20:52:22.000000000 +0000
+--- gcc-4.8.2/gcc/config/rs6000/sysv4.opt	2013-01-10 20:38:27.000000000 +0000
-+++ gcc-4.6.3-ppc/gcc/config/rs6000/sysv4.opt	2012-04-21 22:54:04.000000000 +0100
++++ gcc-4.8.2-ppc/gcc/config/rs6000/sysv4.opt	2014-04-01 14:13:11.000000000 +0100
-@@ -108,6 +108,26 @@
+@@ -120,6 +120,26 @@
  Target RejectNegative
  Link with libads.a, libc.a and crt0.o
  
@@ -210,22 +210,22 @@ diff -Nbaur gcc-4.6.3/gcc/config/rs6000/sysv4.opt gcc-4.6.3-ppc/gcc/config/rs600
  myellowknife
  Target RejectNegative
  Link with libyk.a, libc.a and crt0.o
-diff -Nbaur gcc-4.6.3/gcc/config.gcc gcc-4.6.3-ppc/gcc/config.gcc
+diff -Nbaur gcc-4.8.2/gcc/config.gcc gcc-4.8.2-ppc/gcc/config.gcc
---- gcc-4.6.3/gcc/config.gcc	2011-07-22 17:44:50.000000000 +0100
+--- gcc-4.8.2/gcc/config.gcc	2013-10-03 01:47:24.000000000 +0100
-+++ gcc-4.6.3-ppc/gcc/config.gcc	2012-04-21 22:54:04.000000000 +0100
++++ gcc-4.8.2-ppc/gcc/config.gcc	2014-04-01 14:13:11.000000000 +0100
-@@ -2133,7 +2133,7 @@
+@@ -2057,7 +2057,7 @@
  	use_gcc_stdint=wrap
  	;;
  powerpc-*-eabi*)
 -	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
 +	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
  	extra_options="${extra_options} rs6000/sysv4.opt"
- 	tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
+ 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
  	use_gcc_stdint=wrap
-diff -Nbaur gcc-4.6.3/libcpp/Makefile.in gcc-4.6.3-ppc/libcpp/Makefile.in
+diff -Nbaur gcc-4.8.2/libcpp/Makefile.in gcc-4.8.2-ppc/libcpp/Makefile.in
---- gcc-4.6.3/libcpp/Makefile.in	2012-03-01 12:03:46.000000000 +0000
+--- gcc-4.8.2/libcpp/Makefile.in	2013-10-16 08:27:58.000000000 +0100
-+++ gcc-4.6.3-ppc/libcpp/Makefile.in	2012-04-21 22:54:04.000000000 +0100
++++ gcc-4.8.2-ppc/libcpp/Makefile.in	2014-04-01 14:13:11.000000000 +0100
-@@ -212,8 +212,7 @@
+@@ -207,8 +207,7 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
  # not atomically write the dependency output file.
@@ -235,3 +235,48 @@ diff -Nbaur gcc-4.6.3/libcpp/Makefile.in gcc-4.6.3-ppc/libcpp/Makefile.in
  else
  COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
  	  $(depcomp) $(COMPILE.base)
+diff -Nbaur gcc-4.8.2/libgcc/config/rs6000/crtrestvr.S gcc-4.8.2-ppc/libgcc/config/rs6000/crtrestvr.S
+--- gcc-4.8.2/libgcc/config/rs6000/crtrestvr.S	2013-02-04 19:06:20.000000000 +0000
++++ gcc-4.8.2-ppc/libgcc/config/rs6000/crtrestvr.S	2014-04-01 14:13:11.000000000 +0100
+@@ -24,7 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
+-
++#if 0
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+ 	#include "ppc-asm.h"
+@@ -85,3 +85,4 @@
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff -Nbaur gcc-4.8.2/libgcc/config/rs6000/crtsavevr.S gcc-4.8.2-ppc/libgcc/config/rs6000/crtsavevr.S
+--- gcc-4.8.2/libgcc/config/rs6000/crtsavevr.S	2013-02-04 19:06:20.000000000 +0000
++++ gcc-4.8.2-ppc/libgcc/config/rs6000/crtsavevr.S	2014-04-01 14:13:11.000000000 +0100
+@@ -24,6 +24,7 @@
+ 
+ /* On PowerPC64 Linux, these functions are provided by the linker.  */
+ #ifndef __powerpc64__
++#if 0
+ 
+ #undef __ALTIVEC__
+ #define __ALTIVEC__ 1
+@@ -85,3 +86,4 @@
+ CFI_ENDPROC
+ 
+ #endif
++#endif
+diff -Nbaur gcc-4.8.2/libgcc/crtstuff.c gcc-4.8.2-ppc/libgcc/crtstuff.c
+--- gcc-4.8.2/libgcc/crtstuff.c	2013-02-04 19:06:20.000000000 +0000
++++ gcc-4.8.2-ppc/libgcc/crtstuff.c	2014-04-01 14:13:11.000000000 +0100
+@@ -47,7 +47,7 @@
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
+-
++#define USED_FOR_TARGET
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,
+    this will have to do.  */

dkppc/patches/gdb-7.7.patch

@@ -1,7 +1,7 @@
-diff -Nbaur gdb-7.4/gdb/Makefile.in gdb-7.4-ppc/gdb/Makefile.in
+diff -Nbaur gdb-7.7/gdb/Makefile.in gdb-7.7-ppc/gdb/Makefile.in
---- gdb-7.4/gdb/Makefile.in	2012-01-06 04:43:01.000000000 +0000
+--- gdb-7.7/gdb/Makefile.in	2014-02-06 02:21:29.000000000 +0000
-+++ gdb-7.4-ppc/gdb/Makefile.in	2012-01-28 15:56:00.000000000 +0000
++++ gdb-7.7-ppc/gdb/Makefile.in	2014-04-01 14:01:24.000000000 +0100
-@@ -2195,10 +2195,10 @@
+@@ -2307,10 +2307,10 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
  # not atomically write the dependency output file.
@@ -16,10 +16,10 @@ diff -Nbaur gdb-7.4/gdb/Makefile.in gdb-7.4-ppc/gdb/Makefile.in
  @GMAKE_TRUE@else
  @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
  @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.4/sim/ppc/Makefile.in gdb-7.4-ppc/sim/ppc/Makefile.in
+diff -Nbaur gdb-7.7/sim/ppc/Makefile.in gdb-7.7-ppc/sim/ppc/Makefile.in
---- gdb-7.4/sim/ppc/Makefile.in	2009-09-16 00:26:44.000000000 +0100
+--- gdb-7.7/sim/ppc/Makefile.in	2013-12-08 04:55:48.000000000 +0000
-+++ gdb-7.4-ppc/sim/ppc/Makefile.in	2012-02-25 13:30:02.000000000 +0000
++++ gdb-7.7-ppc/sim/ppc/Makefile.in	2014-04-01 14:01:24.000000000 +0100
-@@ -551,7 +551,7 @@
+@@ -552,7 +552,7 @@
  PACKAGE_OBJ = @sim_pk_obj@
  
  

dkppc/scripts/build-gcc.sh

@@ -75,7 +75,7 @@ cd $target/gcc
 
 if [ ! -f configured-gcc ]
 then
-	CFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
+	CFLAGS="$cflags" CXXFLAGS="$cflags" LDFLAGS="$ldflags" CFLAGS_FOR_TARGET="-O2" CXXFLAGS_FOR_TARGET="-O2" LDFLAGS_FOR_TARGET="" ../../gcc-$GCC_VER/configure \
 	--enable-languages=c,c++,objc \
 	--enable-lto $plugin_ld \
 	--with-cpu=750 \
@@ -87,7 +87,7 @@ then
 	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 	--prefix=$prefix\
 	--disable-dependency-tracking \
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 26" \
+	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 27" \
 	$CROSS_PARAMS \
 	|| { echo "Error configuring gcc stage 1"; exit 1; }
 	touch configured-gcc

select_toolchain.sh

@@ -1,5 +1,17 @@
 #!/bin/bash
 VERSION=0
+case "$BUILD_DKPRO_PACKAGE" in
+  "1" )
+    VERSION=1
+  ;;
+  "2" )
+    VERSION=2
+  ;;
+  "3" )
+    VERSION=3
+  ;;
+esac
+
 while [ $VERSION -eq 0 ]
 do
   echo
@@ -18,20 +30,20 @@ done
 
 case "$VERSION" in
   "1" )
-    GCC_VER=4.7.0
+    GCC_VER=4.9.2
-    BINUTILS_VER=2.22
+    BINUTILS_VER=2.24
-    NEWLIB_VER=1.20.0
+    NEWLIB_VER=2.1.0
-    GDB_VER=7.4
+    GDB_VER=7.7.1
     basedir='dkarm-eabi'
     package=devkitARM
-    target=arm-eabi
+    target=arm-none-eabi
     toolchain=DEVKITARM
   ;;
   "2" )
-    GCC_VER=4.6.3
+    GCC_VER=4.8.2
-    BINUTILS_VER=2.22
+    BINUTILS_VER=2.24
-    NEWLIB_VER=1.20.0
+    NEWLIB_VER=2.0.0
-    GDB_VER=7.4
+    GDB_VER=7.7
     basedir='dkppc'
     package=devkitPPC
     target=powerpc-eabi
@@ -47,4 +59,4 @@ case "$VERSION" in
     target=psp
     toolchain=DEVKITPSP
   ;;
-esac
+esac

strip_bins.sh

@@ -19,6 +19,10 @@ do
 	then
 		$HOST_STRIP $f
 	fi
+	if [[ "$f" == *.dll ]]
+	then
+		$HOST_STRIP -d $f
+	fi
 done
 
 if [ $VERSION -eq 2 ]; then