build libraries when enabled

.gitignore

@@ -1,7 +1,7 @@
 config.sh
 .devkitARM*
 .devkitPPC*
-.devkitPSP*
+.devkitA64*
 *.gz
 *.bz2
 *~

README.TXT

@@ -1,9 +1,14 @@
 devkitPro build scripts
 --------------------------
 
-This readme will guide you through building devkitARM, devkitPPC or devkitPSP
+This readme will guide you through building devkitARM, devkitPPC or devkitA64
 from source using a set of scripts.
 
+Please note that we can't guarantee that what you build with these scripts
+will function in the same way as the binaries we distribute. Where possible
+you should use the binary distributions. We also offer no support for any
+problems you may encounter with these scripts.
+
 The windows versions of the toolchains are now cross compiled on linux using
 mingw-w64
 
@@ -34,13 +39,22 @@ http://www.zlib.net
 http://www.libusb.org
 http://expat.sourceforge.net/
 
-sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev libexpat1-dev
+sudo apt-get install  libfreeimage-dev zlib1g-dev libusb-dev libudev-dev libexpat1-dev
 
 
 Building gxtexconv for cube/wii needs GL/gl.h which can be obtained with
 
 sudo apt-get install mesa-common-dev
 
+Tools for devkitA64 require liblz4.
+
+http://lz4.github.io/lz4/
+
+sudo apt-get install liblz4-dev
+
+The liblz4 with Ubuntu 14.04 isn't new enough. Either upgrade to at least 16.04 or
+build this from source.
+
 For building the OSX versions we install the Xcode commandline tools and build
 pkg-config from source as well as static versions of the libraries listed above.
 This helps keep the dependencies to a minimum so end users can use the tools

build-devkit.sh

@@ -1,15 +1,15 @@
 #!/bin/bash
 #---------------------------------------------------------------------------------
-#	devkitARM release 46
+#	devkitARM release 48
-#	devkitPPC release 29-1
+#	devkitPPC release 30
+#	devkitA64 release 9
 #---------------------------------------------------------------------------------
 
-if [ 0 -eq 1 ] ; then
+if [ 1 -eq 1 ] ; then
-	echo "Currently in release cycle, proceed with caution, do not report problems, do not ask for support."
 	echo "Please use the latest release buildscripts unless advised otherwise by devkitPro staff."
-	echo "http://sourceforge.net/projects/devkitpro/files/buildscripts/"
+	echo "https://github.com/devkitPro/buildscripts/releases/latest"
 	echo
-	echo "The scripts in the git repository are quite often dependent on things which currently only exist"
+	echo "The scripts in the git repository may be dependent on things which currently only exist"
 	echo "on developer machines. This is not a bug, use stable releases."
 	exit 1
 fi
@@ -18,46 +18,49 @@ echo "Please note, these scripts are provided as a courtesy, toolchains built wi
 echo "are for personal use only and may not be distributed by entities other than devkitPro."
 echo "See http://devkitpro.org/wiki/Trademarks"
 echo
-echo "Patches and improvements are of course welcome, please send these to the patch tracker"
+echo "Patches and improvements are of course welcome, please submit a PR"
-echo "https://sourceforge.net/tracker/?group_id=114505&atid=668553"
+echo "https://github.com/devkitPro/buildscripts/pulls"
 echo
 
 
-GENERAL_TOOLS_VER=1.0.0
+GENERAL_TOOLS_VER=1.0.2
 
-LIBGBA_VER=0.5.0
+LIBGBA_VER=0.5.1
-GBATOOLS_VER=1.0.0
+GBATOOLS_VER=1.1.0
 
-LIBNDS_VER=1.6.2
+LIBNDS_VER=1.7.2
-DEFAULT_ARM7_VER=0.7.0
+DEFAULT_ARM7_VER=0.7.4
-DSWIFI_VER=0.4.0
+DSWIFI_VER=0.4.2
-MAXMOD_VER=1.0.10
+MAXMOD_VER=1.0.11
-FILESYSTEM_VER=0.9.13
+FILESYSTEM_VER=0.9.14
-LIBFAT_VER=1.1.0
+LIBFAT_VER=1.1.3
-DSTOOLS_VER=1.1.0
+DSTOOLS_VER=1.2.1
-GRIT_VER=0.8.14
+GRIT_VER=0.8.15
-NDSTOOL_VER=2.0.1
+NDSTOOL_VER=2.1.1
-DLDITOOL_VER=1.24.0
+MMUTIL_VER=1.8.7
-MMUTIL_VER=1.8.6
 
 DFU_UTIL_VER=0.9.1
-STLINK_VER=1.2.2
+STLINK_VER=1.2.3
 
-GAMECUBE_TOOLS_VER=1.0.1
+GAMECUBE_TOOLS_VER=1.0.2
-LIBOGC_VER=1.8.16
+LIBOGC_VER=1.8.17
 WIILOAD_VER=0.5.1
 
-LIBCTRU_VER=1.2.1
+LIBCTRU_VER=1.5.0
-CITRO3D_VER=1.2.0
+CITRO3D_VER=1.4.0
+CITRO2D_VER=1.0.0
 TOOLS3DS_VER=1.1.4
-LINK3DS_VER=0.5.1
+LINK3DS_VER=0.5.2
-PICASSO_VER=2.5.0
+PICASSO_VER=2.7.0
+TEX3DS_VER=1.0.0
 
-GP32_TOOLS_VER=1.0.2
+GP32_TOOLS_VER=1.0.3
-LIBMIRKO_VER=0.9.7
+LIBMIRKO_VER=0.9.8
 
-OSXMIN=${OSXMIN:-10.5}
+SWITCH_TOOLS_VER=1.4.0
-OSXSDKPATH=${OSXSDKPATH:-/Developer/SDKs/MacOSX10.5.sdk}
+LIBNX_VER=1.2.1
+
+OSXMIN=${OSXMIN:-10.9}
 
 #---------------------------------------------------------------------------------
 function extract_and_patch {
@@ -150,8 +153,11 @@ export PATH=$PATH:$TOOLPATH/$package/bin
 
 if [ ! -z $CROSSBUILD ]; then
 	prefix=$INSTALLDIR/$CROSSBUILD/$package
+	toolsprefix=$INSTALLDIR/$CROSSBUILD/tools
 	CROSS_PARAMS="--build=`./config.guess` --host=$CROSSBUILD"
+	CROSS_GCC_PARAMS="--with-gmp=$CROSSPATH --with-mpfr=$CROSSPATH --with-mpc=$CROSSPATH"
 else
+	toolsprefix=$INSTALLDIR/tools
 	prefix=$INSTALLDIR/$package
 fi
 
@@ -168,8 +174,12 @@ PLATFORM=`uname -s`
 
 case $PLATFORM in
 	Darwin )
-		cflags="-mmacosx-version-min=${OSXMIN} -isysroot ${OSXSDKPATH} -I/usr/local/include"
+		cflags="-mmacosx-version-min=${OSXMIN} -I/usr/local/include"
-		ldflags="-mmacosx-version-min=${OSXMIN} -Wl,-syslibroot,${OSXSDKPATH} -L/usr/local/lib"
+		ldflags="-mmacosx-version-min=${OSXMIN} -L/usr/local/lib"
+		if [ "x${OSXSDKPATH}x" != "xx" ]; then
+			cflags="$cflags -isysroot ${OSXSDKPATH}"
+			ldflags="$ldflags -Wl,-syslibroot,${OSXSDKPATH}"
+		fi
 		TESTCC=`cc -v 2>&1 | grep clang`
 		if [ "x${TESTCC}x" != "xx" ]; then
 			cflags="$cflags -fbracket-depth=512"
@@ -177,13 +187,13 @@ case $PLATFORM in
     ;;
 	MINGW32* )
 		cflags="-D__USE_MINGW_ACCESS"
-# horrid hack to get -flto to work on windows
-		plugin_ld="--with-plugin-ld=ld"
     ;;
 esac
 
+
 BUILDSCRIPTDIR=$(pwd)
 BUILDDIR=$(pwd)/.$package
+
 if [ ! -z $CROSSBUILD ]; then
 	BUILDDIR=$BUILDDIR-$CROSSBUILD
 fi
@@ -191,20 +201,21 @@ fi
 patchdir=$(pwd)/$basedir/patches
 scriptdir=$(pwd)/$basedir/scripts
 
-archives="binutils-${BINUTILS_VER}.tar.bz2 gcc-${GCC_VER}.tar.bz2 newlib-${NEWLIB_VER}.tar.gz gdb-${GDB_VER}.tar.bz2"
+archives="binutils-${BINUTILS_VER}.tar.bz2 gcc-${GCC_VER}.tar.xz newlib-${NEWLIB_VER}.tar.gz gdb-${GDB_VER}.tar.xz"
 
 if [ $VERSION -eq 1 ]; then
 
 	targetarchives="libnds-src-${LIBNDS_VER}.tar.bz2 libgba-src-${LIBGBA_VER}.tar.bz2
 		libmirko-src-${LIBMIRKO_VER}.tar.bz2 dswifi-src-${DSWIFI_VER}.tar.bz2 maxmod-src-${MAXMOD_VER}.tar.bz2
-		default_arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
+		default-arm7-src-${DEFAULT_ARM7_VER}.tar.bz2 libfilesystem-src-${FILESYSTEM_VER}.tar.bz2
-		libfat-src-${LIBFAT_VER}.tar.bz2 libctru-src-${LIBCTRU_VER}.tar.bz2  citro3d-src-${CITRO3D_VER}.tar.bz2"
+		libfat-src-${LIBFAT_VER}.tar.bz2 libctru-src-${LIBCTRU_VER}.tar.bz2  citro3d-src-${CITRO3D_VER}.tar.bz2
+		citro2d-src-${CITRO2D_VER}.tar.bz2"
 
-	hostarchives="gbatools-$GBATOOLS_VER.tar.bz2 gp32tools-$GP32_TOOLS_VER.tar.bz2
+	hostarchives="gba-tools-$GBATOOLS_VER.tar.bz2 gp32-tools-$GP32_TOOLS_VER.tar.bz2
 		dstools-$DSTOOLS_VER.tar.bz2 grit-$GRIT_VER.tar.bz2 ndstool-$NDSTOOL_VER.tar.bz2
-		general-tools-$GENERAL_TOOLS_VER.tar.bz2 dlditool-$DLDITOOL_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2
+		general-tools-$GENERAL_TOOLS_VER.tar.bz2 mmutil-$MMUTIL_VER.tar.bz2
 		dfu-util-$DFU_UTIL_VER.tar.bz2 stlink-$STLINK_VER.tar.bz2 3dstools-$TOOLS3DS_VER.tar.bz2
-		picasso-$PICASSO_VER.tar.bz2 3dslink-$LINK3DS_VER.tar.bz2"
+		picasso-$PICASSO_VER.tar.bz2 tex3ds-$TEX3DS_VER.tar.bz2 3dslink-$LINK3DS_VER.tar.bz2"
 fi
 
 if [ $VERSION -eq 2 ]; then
@@ -216,6 +227,14 @@ if [ $VERSION -eq 2 ]; then
 	archives="binutils-${MN_BINUTILS_VER}.tar.bz2 $archives"
 fi
 
+if [ $VERSION -eq 3 ]; then
+
+	targetarchives=" libnx-src-${LIBNX_VER}.tar.bz2"
+
+	hostarchives="general-tools-$GENERAL_TOOLS_VER.tar.bz2 switch-tools-$SWITCH_TOOLS_VER.tar.bz2"
+
+fi
+
 
 if [ ! -z "$BUILD_DKPRO_SRCDIR" ] ; then
 	SRCDIR="$BUILD_DKPRO_SRCDIR"
@@ -228,7 +247,7 @@ for archive in $archives $targetarchives $hostarchives
 do
 	echo $archive
 	if [ ! -f $archive ]; then
-		$FETCH https://github.com/devkitPro/buildscripts/releases/download/sources/$archive || { echo "Error: Failed to download $archive"; exit 1; }
+		$FETCH https://downloads.devkitpro.org/$archive || { echo "Error: Failed to download $archive"; exit 1; }
 	fi
 done
 
@@ -237,9 +256,9 @@ mkdir -p $BUILDDIR
 cd $BUILDDIR
 
 extract_and_patch binutils $BINUTILS_VER bz2
-extract_and_patch gcc $GCC_VER bz2
+extract_and_patch gcc $GCC_VER xz
 extract_and_patch newlib $NEWLIB_VER gz
-extract_and_patch gdb $GDB_VER bz2
+extract_and_patch gdb $GDB_VER xz
 
 if [ $VERSION -eq 2 ]; then
 	extract_and_patch binutils $MN_BINUTILS_VER bz2
@@ -267,19 +286,17 @@ done
 # Build and install devkit components
 #---------------------------------------------------------------------------------
 if [ -f $scriptdir/build-gcc.sh ]; then . $scriptdir/build-gcc.sh || { echo "Error building toolchain"; exit 1; }; cd $BUILDSCRIPTDIR; fi
-if [ -f $scriptdir/build-tools.sh ]; then . $scriptdir/build-tools.sh || { echo "Error building tools"; exit 1; }; cd $BUILDSCRIPTDIR; fi
-if [ -f $scriptdir/build-crtls.sh ]; then . $scriptdir/build-crtls.sh || { echo "Error building crtls"; exit 1; }; cd $BUILDSCRIPTDIR; fi
 
-if [ ! -z $CROSSBUILD ]; then
+if [ "$BUILD_DKPRO_SKIP_TOOLS" != "1" ] && [ -f $scriptdir/build-tools.sh ]; then
-	if [ $VERSION -ne 3 ]; then
+ . $scriptdir/build-tools.sh || { echo "Error building tools"; exit 1; }; cd $BUILDSCRIPTDIR;
-		cp -v $CROSSBINPATH/FreeImage.dll $prefix/bin
+fi
-	fi
+
-	if [ $VERSION -eq 1 ]; then
+if [ "$BUILD_DKPRO_SKIP_LIBRARIES" != "1" ] && [ -f $scriptdir/build-libs.sh ]; then
-		cp -v $CROSSBINPATH/libusb-1.0.dll $prefix/bin
+  . $scriptdir/build-libs.sh || { echo "Error building libraries"; exit 1; }; cd $BUILDSCRIPTDIR;
-	fi
+fi
-	cp -v	$CROSSLIBPATH/libstdc++-6.dll \
+
-		$CROSSLIBPATH/libgcc_s_sjlj-1.dll \
+if [ ! -z $CROSSBUILD ] && grep -q "mingw" <<<"$CROSSBUILD" ; then
-		$prefix/bin
+	cp -v	$CROSSBINPATH//libwinpthread-1.dll $prefix/bin
 fi
 
 echo "stripping installed binaries"
@@ -307,5 +324,13 @@ fi
 
 
 echo
-echo "note: Add the following to your environment;  DEVKITPRO=$TOOLPATH $toolchain=$TOOLPATH/$package"
+echo "note: Add the following to your environment;"
+echo
+echo "  DEVKITPRO=$TOOLPATH"
+if [ "$toolchain" != "DEVKITA64" ]; then
+echo "  $toolchain=$TOOLPATH/$package"
+fi
+echo
+echo "add $TOOLPATH/tools/bin to your PATH"
+echo
 echo

config.sh.sample

@@ -9,7 +9,7 @@
 #   0: User selects manually
 #   1: devkitARM
 #   2: devkitPPC
-#   3: devkitPSP
+#   3: devkitA64
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_PACKAGE=0
 
@@ -22,7 +22,13 @@ BUILD_DKPRO_PACKAGE=0
 #---------------------------------------------------------------------------------
 # Path to previously downloaded source packages, comment if not specified
 #---------------------------------------------------------------------------------
-#BUILD_DKPRO_SRCDIR=/d/projects/archives
+#BUILD_DKPRO_SRCDIR=~/projects/archives
+
+
+#---------------------------------------------------------------------------------
+# skip building the target libraries
+#---------------------------------------------------------------------------------
+BUILD_DKPRO_SKIP_LIBRARIES=0
 
 #---------------------------------------------------------------------------------
 # MAKEFLAGS for building - use number of processors for jobs
@@ -30,7 +36,18 @@ BUILD_DKPRO_PACKAGE=0
 #numcores=`getconf _NPROCESSORS_ONLN`
 #export MAKEFLAGS="$MAKEFLAGS -j${numcores}"
 
+
 #---------------------------------------------------------------------------------
+# Uncomment to skip building of tools
+#---------------------------------------------------------------------------------
+#BUILD_DKPRO_SKIP_TOOLS=1
+
+#---------------------------------------------------------------------------------
+# Uncomment to skip building of libraries
+#---------------------------------------------------------------------------------
+#BUILD_DKPRO_SKIP_LIBRARIES=1
+
+
 # Automated script execution
 #---------------------------------------------------------------------------------
 #  0: Ask to delete build folders & patched sources
@@ -38,3 +55,9 @@ BUILD_DKPRO_PACKAGE=0
 #---------------------------------------------------------------------------------
 BUILD_DKPRO_AUTOMATED=0
 
+
+#---------------------------------------------------------------------------------
+# set OSX SDK path if needed
+#---------------------------------------------------------------------------------
+#export OSXSDKPATH=/Library/Developer/CommandLineTools/SDKs/MacOSX10.12.sdk
+

cross-build-i686-w64-mingw32.sh

@@ -3,5 +3,3 @@ export CROSSBUILD=i686-w64-mingw32
 export CROSSLIBPATH=/opt/mingw32/mingw/lib
 export CROSSBINPATH=/opt/mingw32/mingw/bin
 export PATH=/opt/mingw32/bin:$PATH
-export PKG_CONFIG_PATH=
-export PKG_CONFIG_LIBDIR=$CROSSLIBPATH/pkgconfig

cross-build-x86_64-apple-darwin15.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+export CPPFLAGS=-I/opt/osx/x86_64-apple-darwin15/include
+export LDFLAGS=-L/opt/osx/x86_64-apple-darwin15/lib
+
+export OSXCROSS_PKG_CONFIG_USE_NATIVE_VARIABLES=1
+
+export CC=x86_64-apple-darwin15-clang
+export CXX=x86_64-apple-darwin15-clang++
+
+export CROSSBUILD=x86_64-apple-darwin15
+export CROSSPATH=/opt/osx/x86_64-apple-darwin15
+export CROSSLIBPATH=$CROSSPATH/lib
+export CROSSBINPATH=$CROSSPATH/bin
+export PATH=/opt/osx/bin:$PATH
+export PKG_CONFIG_PATH=
+export PKG_CONFIG_LIBDIR=$CROSSLIBPATH/pkgconfig
+

cross-build-x86_64-w64-mingw32.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 export CROSSBUILD=x86_64-w64-mingw32
-export CROSSLIBPATH=/opt/x86_64-mingw-w64/mingw/lib
+export CROSSPATH=/opt/mingw64/mingw
-export CROSSBINPATH=/opt/x86_64-mingw-w64/mingw/bin
+export CROSSLIBPATH=$CROSSPATH/lib
-export PATH=/opt/x86_64-mingw-w64/bin:$PATH
+export CROSSBINPATH=$CROSSPATH/bin
-export PKG_CONFIG_PATH=$CROSSLIBPATH/pkgconfig
+export PATH=/opt/mingw64/bin:$PATH
 

dka64/patches/binutils-2.30.patch

@@ -0,0 +1,346 @@
+diff -NBaur binutils-2.30/bfd/elfnn-aarch64.c binutils-2.30-dka64/bfd/elfnn-aarch64.c
+--- binutils-2.30/bfd/elfnn-aarch64.c	2018-01-17 11:29:21.000000000 +0000
++++ binutils-2.30-dka64/bfd/elfnn-aarch64.c	2018-02-11 19:54:08.141257544 +0000
+@@ -2097,6 +2097,12 @@
+   aarch64_stub_erratum_843419_veneer,
+ };
+ 
++/* Is an undefined weak symbol resolved to 0 ? */
++#define UNDEFINED_WEAK_RESOLVED_TO_ZERO(INFO, EH)               \
++  ((EH)->root.root.type == bfd_link_hash_undefweak              \
++   && bfd_link_executable (INFO)                                \
++   && !(INFO)->dynamic_undefined_weak)
++
+ struct elf_aarch64_stub_hash_entry
+ {
+   /* Base hash table entry structure.  */
+@@ -6088,11 +6094,13 @@
+       Elf_Internal_Sym *sym;
+       asection *sec;
+       struct elf_link_hash_entry *h;
++      struct elf_aarch64_link_hash_entry *eh;
+       bfd_vma relocation;
+       bfd_reloc_status_type r;
+       arelent bfd_reloc;
+       char sym_type;
+       bfd_boolean unresolved_reloc = FALSE;
++      bfd_boolean resolved_to_zero = FALSE;
+       char *error_message = NULL;
+ 
+       r_symndx = ELFNN_R_SYM (rel->r_info);
+@@ -6226,6 +6234,10 @@
+ 					       h, &unresolved_reloc,
+ 					       save_addend, &addend, sym);
+ 
++      eh = (struct elf_aarch64_link_hash_entry *) h;
++      resolved_to_zero = (eh != NULL
++                          && UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh));
++      
+       switch (elfNN_aarch64_bfd_reloc_from_type (r_type))
+ 	{
+ 	case BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC:
+@@ -6249,7 +6261,7 @@
+ 	      need_relocs =
+ 		(!bfd_link_executable (info) || indx != 0) &&
+ 		(h == NULL
+-		 || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++		 || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 		 || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6344,7 +6356,7 @@
+ 	      need_relocs =
+ 		(!bfd_link_executable (info) || indx != 0) &&
+ 		(h == NULL
+-		 || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++		 || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 		 || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6393,7 +6405,7 @@
+ 	      bfd_vma off = symbol_tlsdesc_got_offset (input_bfd, h, r_symndx);
+ 
+ 	      need_relocs = (h == NULL
+-			     || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++			     || (ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 			     || h->root.type != bfd_link_hash_undefweak);
+ 
+ 	      BFD_ASSERT (globals->root.srelgot != NULL);
+@@ -6735,6 +6747,26 @@
+   return FALSE;
+ }
+ 
++/* Remove undefined weak symbol from the dynamic symbol table if it
++   is resolved to 0.   */
++
++extern bfd_boolean
++elfNN_aarch64_elf_fixup_symbol (struct bfd_link_info *, struct elf_link_hash_entry *);
++
++bfd_boolean
++elfNN_aarch64_elf_fixup_symbol (struct bfd_link_info *info,
++                             struct elf_link_hash_entry *h)
++{
++  if (h->dynindx != -1
++      && UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, elf_aarch64_hash_entry (h)))
++    {
++      h->dynindx = -1;
++      _bfd_elf_strtab_delref (elf_hash_table (info)->dynstr,
++                              h->dynstr_index);
++    }
++  return TRUE;
++}
++
+ /* Adjust a symbol defined by a dynamic object and referenced by a
+    regular object.  The current definition is in some section of the
+    dynamic object, but we're not including those sections.  We have to
+@@ -7928,6 +7960,7 @@
+   struct elf_aarch64_link_hash_table *htab;
+   struct elf_aarch64_link_hash_entry *eh;
+   struct elf_dyn_relocs *p;
++  bfd_boolean resolved_to_zero;
+ 
+   /* An example of a bfd_link_hash_indirect symbol is versioned
+      symbol. For example: __gxx_personality_v0(bfd_link_hash_indirect)
+@@ -7947,6 +7980,10 @@
+   info = (struct bfd_link_info *) inf;
+   htab = elf_aarch64_hash_table (info);
+ 
++  eh = (struct elf_aarch64_link_hash_entry *) h;
++  eh->tlsdesc_got_jump_table_offset = (bfd_vma) - 1;
++  resolved_to_zero = UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh);
++
+   /* Since STT_GNU_IFUNC symbol must go through PLT, we handle it
+      here if it is defined and referenced in a non-shared object.  */
+   if (h->type == STT_GNU_IFUNC
+@@ -7956,7 +7993,7 @@
+     {
+       /* Make sure this symbol is output as a dynamic symbol.
+ 	 Undefined weak syms won't yet be marked as dynamic.  */
+-      if (h->dynindx == -1 && !h->forced_local
++      if (h->dynindx == -1 && !h->forced_local && !resolved_to_zero
+ 	  && h->root.type == bfd_link_hash_undefweak)
+ 	{
+ 	  if (!bfd_elf_link_record_dynamic_symbol (info, h))
+@@ -7990,6 +8027,11 @@
+ 	     of relaxing into these from the large model PLT entries.  */
+ 	  s->size += PLT_SMALL_ENTRY_SIZE;
+ 
++          /* There should be no PLT relocations against resolved undefined
++             weak symbols in the executable.  */
++          if (!resolved_to_zero)
++            {
++
+ 	  /* We also need to make an entry in the .got.plt section, which
+ 	     will be placed in the .got section by the linker script.  */
+ 	  htab->root.sgotplt->size += GOT_ENTRY_SIZE;
+@@ -8012,6 +8054,7 @@
+ 
+ 	  htab->root.srelplt->reloc_count++;
+ 	}
++	}
+       else
+ 	{
+ 	  h->plt.offset = (bfd_vma) - 1;
+@@ -8024,9 +8067,6 @@
+       h->needs_plt = 0;
+     }
+ 
+-  eh = (struct elf_aarch64_link_hash_entry *) h;
+-  eh->tlsdesc_got_jump_table_offset = (bfd_vma) - 1;
+-
+   if (h->got.refcount > 0)
+     {
+       bfd_boolean dyn;
+@@ -8038,7 +8078,7 @@
+ 
+       /* Make sure this symbol is output as a dynamic symbol.
+ 	 Undefined weak syms won't yet be marked as dynamic.  */
+-      if (dyn && h->dynindx == -1 && !h->forced_local
++      if (dyn && h->dynindx == -1 && !h->forced_local && !resolved_to_zero
+ 	  && h->root.type == bfd_link_hash_undefweak)
+ 	{
+ 	  if (!bfd_elf_link_record_dynamic_symbol (info, h))
+@@ -8052,7 +8092,7 @@
+ 	{
+ 	  h->got.offset = htab->root.sgot->size;
+ 	  htab->root.sgot->size += GOT_ENTRY_SIZE;
+-	  if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++	  if (((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 	       || h->root.type != bfd_link_hash_undefweak)
+ 	      && (bfd_link_pic (info)
+ 		  || WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, 0, h))
+@@ -8088,7 +8128,7 @@
+ 	    }
+ 
+ 	  indx = h && h->dynindx != -1 ? h->dynindx : 0;
+-	  if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
++	  if (((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT && !resolved_to_zero)
+ 	       || h->root.type != bfd_link_hash_undefweak)
+ 	      && (!bfd_link_executable (info)
+ 		  || indx != 0
+@@ -8154,7 +8194,7 @@
+ 	 visibility.  */
+       if (eh->dyn_relocs != NULL && h->root.type == bfd_link_hash_undefweak)
+ 	{
+-	  if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT
++	  if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT || resolved_to_zero
+ 	      || UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
+ 	    eh->dyn_relocs = NULL;
+ 
+@@ -8174,7 +8214,9 @@
+ 	 symbols which turn out to need copy relocs or are not
+ 	 dynamic.  */
+ 
+-      if (!h->non_got_ref
++      if (!(h->non_got_ref
++           || (h->root.type == bfd_link_hash_undefweak
++               && !resolved_to_zero))
+ 	  && ((h->def_dynamic
+ 	       && !h->def_regular)
+ 	      || (htab->root.dynamic_sections_created
+@@ -8185,6 +8227,7 @@
+ 	     Undefined weak syms won't yet be marked as dynamic.  */
+ 	  if (h->dynindx == -1
+ 	      && !h->forced_local
++	      && !resolved_to_zero
+ 	      && h->root.type == bfd_link_hash_undefweak
+ 	      && !bfd_elf_link_record_dynamic_symbol (info, h))
+ 	    return FALSE;
+@@ -8805,8 +8848,17 @@
+ 				     Elf_Internal_Sym *sym)
+ {
+   struct elf_aarch64_link_hash_table *htab;
++  struct elf_aarch64_link_hash_entry *eh;
++  bfd_boolean local_undefweak;
+   htab = elf_aarch64_hash_table (info);
+ 
++  eh = (struct elf_aarch64_link_hash_entry *) h;
++
++  /* We keep PLT/GOT entries without dynamic PLT/GOT relocations for
++     resolved undefined weak symbols in executable so that their
++     references have value 0 at run-time.  */
++  local_undefweak = UNDEFINED_WEAK_RESOLVED_TO_ZERO (info, eh);
++
+   if (h->plt.offset != (bfd_vma) - 1)
+     {
+       asection *plt, *gotplt, *relplt;
+@@ -8841,7 +8893,7 @@
+ 	return FALSE;
+ 
+       elfNN_aarch64_create_small_pltn_entry (h, htab, output_bfd, info);
+-      if (!h->def_regular)
++      if (!local_undefweak && !h->def_regular)
+ 	{
+ 	  /* Mark the symbol as undefined, rather than as defined in
+ 	     the .plt section.  */
+@@ -8860,10 +8912,11 @@
+     }
+ 
+   if (h->got.offset != (bfd_vma) - 1
+-      && elf_aarch64_hash_entry (h)->got_type == GOT_NORMAL
++      && elf_aarch64_hash_entry (h)->got_type == GOT_NORMAL 
+       /* Undefined weak symbol in static PIE resolves to 0 without
+ 	 any dynamic relocations.  */
+-      && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h))
++      && !UNDEFWEAK_NO_DYNAMIC_RELOC (info, h)
++      && !local_undefweak)
+     {
+       Elf_Internal_Rela rela;
+       bfd_byte *loc;
+@@ -9357,6 +9410,9 @@
+ #define elf_backend_init_index_section		\
+   _bfd_elf_init_2_index_sections
+ 
++#define elf_backend_fixup_symbol		\
++  elfNN_aarch64_elf_fixup_symbol
++
+ #define elf_backend_finish_dynamic_sections	\
+   elfNN_aarch64_finish_dynamic_sections
+ 
+diff -NBaur binutils-2.30/ld/emulparams/aarch64elf32.sh binutils-2.30-dka64/ld/emulparams/aarch64elf32.sh
+--- binutils-2.30/ld/emulparams/aarch64elf32.sh	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-dka64/ld/emulparams/aarch64elf32.sh	2018-02-11 19:48:08.997273556 +0000
+@@ -1,3 +1,5 @@
++. ${srcdir}/emulparams/dynamic_undefined_weak.sh
++
+ ARCH="aarch64:ilp32"
+ MACHINE=
+ NOP=0
+diff -NBaur binutils-2.30/ld/emulparams/aarch64elf.sh binutils-2.30-dka64/ld/emulparams/aarch64elf.sh
+--- binutils-2.30/ld/emulparams/aarch64elf.sh	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-dka64/ld/emulparams/aarch64elf.sh	2018-02-11 19:48:09.009273555 +0000
+@@ -1,3 +1,5 @@
++. ${srcdir}/emulparams/dynamic_undefined_weak.sh
++
+ ARCH=aarch64
+ MACHINE=
+ NOP=0
+diff -NBaur binutils-2.30/ld/emultempl/aarch64elf.em binutils-2.30-dka64/ld/emultempl/aarch64elf.em
+--- binutils-2.30/ld/emultempl/aarch64elf.em	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-dka64/ld/emultempl/aarch64elf.em	2018-02-11 19:48:09.009273555 +0000
+@@ -378,7 +378,7 @@
+   { "no-apply-dynamic-relocs", no_argument, NULL, OPTION_NO_APPLY_DYNAMIC_RELOCS},
+ '
+ 
+-PARSE_AND_LIST_OPTIONS='
++PARSE_AND_LIST_OPTIONS=${PARSE_AND_LIST_OPTIONS}'
+   fprintf (file, _("  --no-enum-size-warning      Don'\''t warn about objects with incompatible\n"
+ 		   "                                enum sizes\n"));
+   fprintf (file, _("  --no-wchar-size-warning     Don'\''t warn about objects with incompatible"
+diff -NBaur binutils-2.30/ld/Makefile.am binutils-2.30-dka64/ld/Makefile.am
+--- binutils-2.30/ld/Makefile.am	2018-01-13 13:31:16.000000000 +0000
++++ binutils-2.30-dka64/ld/Makefile.am	2018-02-11 19:48:09.021273555 +0000
+@@ -1654,19 +1654,23 @@
+   $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf.c: $(srcdir)/emulparams/aarch64elf.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32.c: $(srcdir)/emulparams/aarch64elf32.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elfb.c: $(srcdir)/emulparams/aarch64elfb.sh $(srcdir)/emulparams/aarch64elf.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32b.c: $(srcdir)/emulparams/aarch64elf32b.sh $(srcdir)/emulparams/aarch64elf32.sh \
+-  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
++  $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em ldemul-list.h \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64cloudabi.c: $(srcdir)/emulparams/aarch64cloudabi.sh \
+diff -NBaur binutils-2.30/ld/Makefile.in binutils-2.30-dka64/ld/Makefile.in
+--- binutils-2.30/ld/Makefile.in	2018-01-27 15:03:10.000000000 +0000
++++ binutils-2.30-dka64/ld/Makefile.in	2018-02-11 19:48:09.037273554 +0000
+@@ -3219,18 +3219,22 @@
+ 
+ eaarch64elf.c: $(srcdir)/emulparams/aarch64elf.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32.c: $(srcdir)/emulparams/aarch64elf32.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elfb.c: $(srcdir)/emulparams/aarch64elfb.sh $(srcdir)/emulparams/aarch64elf.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64elf32b.c: $(srcdir)/emulparams/aarch64elf32b.sh $(srcdir)/emulparams/aarch64elf32.sh \
+   $(ELF_DEPS) $(srcdir)/emultempl/aarch64elf.em \
++  $(srcdir)/emulparams/dynamic_undefined_weak.sh \
+   $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ 
+ eaarch64cloudabi.c: $(srcdir)/emulparams/aarch64cloudabi.sh \

dka64/patches/gcc-8.1.0.patch

@@ -0,0 +1,190 @@
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64.c gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.c
+--- gcc-8.1.0/gcc/config/aarch64/aarch64.c	2018-03-15 08:55:04.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.c	2018-05-08 11:09:01.247467815 +0100
+@@ -11963,8 +11963,24 @@
+       || !register_operand (target, Pmode))
+     target = gen_reg_rtx (Pmode);
+ 
+-  /* Can return in any reg.  */
+-  emit_insn (gen_aarch64_load_tp_hard (target));
++  if (TARGET_HARD_TP)
++    {
++      /* Can return in any reg.  */
++      emit_insn (gen_aarch64_load_tp_hard (target));
++    }
++  else
++    {
++      /* Always returned in r0.  Immediately copy the result into a pseudo,
++	 otherwise other uses of r0 (e.g. setting up function arguments) may
++	 clobber the value.  */
++
++      rtx tmp;
++
++      emit_insn (gen_aarch64_load_tp_soft ());
++
++      tmp = gen_rtx_REG (DImode, R0_REGNUM);
++      emit_move_insn (target, tmp);
++    }
+   return target;
+ }
+ 
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64-elf-raw.h gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64-elf-raw.h
+--- gcc-8.1.0/gcc/config/aarch64/aarch64-elf-raw.h	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64-elf-raw.h	2018-05-08 11:09:01.247467815 +0100
+@@ -22,6 +22,7 @@
+ #ifndef GCC_AARCH64_ELF_RAW_H
+ #define GCC_AARCH64_ELF_RAW_H
+ 
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
+ #define STARTFILE_SPEC " crti%O%s crtbegin%O%s crt0%O%s"
+ #define ENDFILE_SPEC \
+   " crtend%O%s crtn%O%s " \
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64.h gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.h
+--- gcc-8.1.0/gcc/config/aarch64/aarch64.h	2018-02-21 14:05:45.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.h	2018-05-08 11:09:01.255467862 +0100
+@@ -957,6 +957,10 @@
+ /* Check TLS Descriptors mechanism is selected.  */
+ #define TARGET_TLS_DESC (aarch64_tls_dialect == TLS_DESCRIPTORS)
+ 
++/* Check selected thread pointer access sequence to use.  */
++#define TARGET_HARD_TP (target_thread_pointer == TP_HARD)
++#define TARGET_SOFT_TP (target_thread_pointer == TP_SOFT)
++
+ extern enum aarch64_code_model aarch64_cmodel;
+ 
+ /* When using the tiny addressing model conditional and unconditional branches
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64.md gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.md
+--- gcc-8.1.0/gcc/config/aarch64/aarch64.md	2018-04-24 17:58:49.000000000 +0100
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.md	2018-05-08 11:09:01.255467862 +0100
+@@ -5693,11 +5693,22 @@
+ (define_insn "aarch64_load_tp_hard"
+   [(set (match_operand:DI 0 "register_operand" "=r")
+ 	(unspec:DI [(const_int 0)] UNSPEC_TLS))]
+-  ""
+-  "mrs\\t%0, tpidr_el0"
++  "TARGET_HARD_TP"
++  "mrs\\t%0, tpidr_el0\\t// aarch64_load_tp_hard"
+   [(set_attr "type" "mrs")]
+ )
+ 
++(define_insn "aarch64_load_tp_soft"
++  [(set (reg:DI 0) (unspec:DI [(const_int 0)] UNSPEC_TLS))
++   (clobber (reg:DI IP0_REGNUM))
++   (clobber (reg:DI IP1_REGNUM))
++   (clobber (reg:DI LR_REGNUM))
++   (clobber (reg:CC CC_REGNUM))]
++  "TARGET_SOFT_TP"
++  "bl\\t__aarch64_read_tp\\t// aarch64_load_tp_soft"
++  [(set_attr "type" "branch")]
++)
++
+ ;; The TLS ABI specifically requires that the compiler does not schedule
+ ;; instructions in the TLS stubs, in order to enable linker relaxation.
+ ;; Therefore we treat the stubs as an atomic sequence.
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64.opt gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.opt
+--- gcc-8.1.0/gcc/config/aarch64/aarch64.opt	2018-01-13 17:50:35.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64.opt	2018-05-08 11:09:01.255467862 +0100
+@@ -115,6 +115,20 @@
+ EnumValue
+ Enum(aarch64_tls_size) String(48) Value(48)
+ 
++mtp=
++Target RejectNegative Joined Enum(aarch64_tp_type) Var(target_thread_pointer) Init(TP_HARD)
++Specify how to access the thread pointer.
++
++Enum
++Name(aarch64_tp_type) Type(enum aarch64_tp_type)
++Valid arguments to -mtp=:
++
++EnumValue
++Enum(aarch64_tp_type) String(hard) Value(TP_HARD)
++
++EnumValue
++Enum(aarch64_tp_type) String(soft) Value(TP_SOFT)
++
+ march=
+ Target RejectNegative ToLower Joined Var(aarch64_arch_string)
+ -march=ARCH	Use features of architecture ARCH.
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/aarch64-opts.h gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64-opts.h
+--- gcc-8.1.0/gcc/config/aarch64/aarch64-opts.h	2018-01-13 17:50:35.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/aarch64-opts.h	2018-05-08 11:09:01.255467862 +0100
+@@ -48,6 +48,12 @@
+   TLS_DESCRIPTORS
+ };
+ 
++/* Which thread pointer access sequence to use.  */
++enum aarch64_tp_type {
++  TP_HARD,
++  TP_SOFT
++};
++
+ /* The code model defines the address generation strategy.
+    Most have a PIC and non-PIC variant.  */
+ enum aarch64_code_model {
+diff -NBaur gcc-8.1.0/gcc/config/aarch64/t-aarch64 gcc-8.1.0-aarch64/gcc/config/aarch64/t-aarch64
+--- gcc-8.1.0/gcc/config/aarch64/t-aarch64	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/config/aarch64/t-aarch64	2018-05-08 11:09:01.255467862 +0100
+@@ -68,5 +68,7 @@
+ 		$(srcdir)/config/aarch64/cortex-a57-fma-steering.c
+ 
+ comma=,
+-MULTILIB_OPTIONS    = $(subst $(comma),/, $(patsubst %, mabi=%, $(subst $(comma),$(comma)mabi=,$(TM_MULTILIB_CONFIG))))
+-MULTILIB_DIRNAMES   = $(subst $(comma), ,$(TM_MULTILIB_CONFIG))
++MULTILIB_OPTIONS    = mcmodel=large fPIC
++MULTILIB_DIRNAMES   = large pic
++MULTILIB_REQUIRED   = mcmodel=large fPIC
++MULTILIB_MATCHES    = fPIC=fpic fPIC=fpie fPIC=fPIE
+diff -NBaur gcc-8.1.0/gcc/gcc.c gcc-8.1.0-aarch64/gcc/gcc.c
+--- gcc-8.1.0/gcc/gcc.c	2018-02-09 06:44:06.000000000 +0000
++++ gcc-8.1.0-aarch64/gcc/gcc.c	2018-05-08 11:09:01.259467885 +0100
+@@ -786,6 +786,11 @@
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1081,6 +1086,7 @@
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1577,6 +1583,7 @@
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff -NBaur gcc-8.1.0/libgcc/crtstuff.c gcc-8.1.0-aarch64/libgcc/crtstuff.c
+--- gcc-8.1.0/libgcc/crtstuff.c	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-aarch64/libgcc/crtstuff.c	2018-05-08 11:09:01.259467885 +0100
+@@ -47,6 +47,7 @@
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
++#define USED_FOR_TARGET
+ 
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,
+diff -NBaur gcc-8.1.0/libgcc/Makefile.in gcc-8.1.0-aarch64/libgcc/Makefile.in
+--- gcc-8.1.0/libgcc/Makefile.in	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-aarch64/libgcc/Makefile.in	2018-05-08 11:09:01.259467885 +0100
+@@ -847,7 +847,7 @@
+ # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
+ # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
+ 
+-c_flags := -fexceptions
++c_flags := -fno-exceptions
+ 
+ ifeq ($(enable_shared),yes)
+ 

dka64/rules/base_rules

@@ -0,0 +1,40 @@
+include $(DEVKITPRO)/devkitA64/base_tools
+
+#---------------------------------------------------------------------------------
+%.a:
+#---------------------------------------------------------------------------------
+	@echo $(notdir $@)
+	@rm -f $@
+	$(AR) -rc $@ $^
+
+
+#---------------------------------------------------------------------------------
+%.o: %.cpp
+	@echo $(notdir $<)
+	$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.c
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d $(CFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.s
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+%.o: %.S
+	@echo $(notdir $<)
+	$(CC) -MMD -MP -MF $(DEPSDIR)/$*.d -x assembler-with-cpp $(ASFLAGS) -c $< -o $@ $(ERROR_FILTER)
+
+#---------------------------------------------------------------------------------
+# canned command sequence for binary data
+#---------------------------------------------------------------------------------
+define bin2o
+	bin2s $< | $(AS) -o $(@)
+	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"_end[];" > `(echo $(<F) | tr . _)`.h
+	echo "extern const u8" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`"[];" >> `(echo $(<F) | tr . _)`.h
+	echo "extern const u32" `(echo $(<F) | sed -e 's/^\([0-9]\)/_\1/' | tr . _)`_size";" >> `(echo $(<F) | tr . _)`.h
+endef
+

dka64/rules/base_tools

@@ -0,0 +1,41 @@
+#---------------------------------------------------------------------------------
+# make sure we have bash on OSX
+#---------------------------------------------------------------------------------
+UNAME_S	:=	$(shell uname -s)
+UNAME_R	:=	$(shell uname -r)
+
+ifneq (,$(findstring Darwin,$(UNAME_S)))
+	export SHELL=/bin/bash
+endif
+
+#---------------------------------------------------------------------------------
+# path to tools
+#---------------------------------------------------------------------------------
+DEVKITPATH=$(shell echo "$(DEVKITPRO)" | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+export PATH	:=	$(DEVKITPATH)/tools/bin:$(DEVKITPATH)/devkitA64/bin:$(PATH)
+
+#---------------------------------------------------------------------------------
+# add portlibs path
+#---------------------------------------------------------------------------------
+export PORTLIBS_PATH	:=	$(DEVKITPATH)/portlibs
+
+
+#---------------------------------------------------------------------------------
+# the prefix on the compiler executables
+#---------------------------------------------------------------------------------
+PREFIX		:=	aarch64-none-elf-
+
+export CC	:=	$(PREFIX)gcc
+export CXX	:=	$(PREFIX)g++
+export AS	:=	$(PREFIX)as
+export AR	:=	$(PREFIX)gcc-ar
+export OBJCOPY	:=	$(PREFIX)objcopy
+export STRIP	:=	$(PREFIX)strip
+export NM	:=	$(PREFIX)gcc-nm
+export RANLIB	:=	$(PREFIX)gcc-ranlib
+
+ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
+
+ifneq (,$(ISVC))
+	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
+endif

dka64/scripts/build-gcc.sh

@@ -0,0 +1,188 @@
+#!/bin/sh
+#---------------------------------------------------------------------------------
+
+#---------------------------------------------------------------------------------
+# build and install binutils
+#---------------------------------------------------------------------------------
+
+mkdir -p $target/binutils
+cd $target/binutils
+
+if [ ! -f configured-binutils ]
+then
+	CFLAGS=$cflags LDFLAGS=$ldflags ../../binutils-$BINUTILS_VER/configure \
+        --prefix=$prefix --target=$target --disable-nls --disable-werror \
+	--enable-lto --enable-plugins --enable-poison-system-directories \
+	$CROSS_PARAMS \
+        || { echo "Error configuring binutils"; exit 1; }
+	touch configured-binutils
+fi
+
+if [ ! -f built-binutils ]
+then
+  $MAKE || { echo "Error building binutils"; exit 1; }
+  touch built-binutils
+fi
+
+if [ ! -f installed-binutils ]
+then
+  $MAKE install || { echo "Error installing binutils"; exit 1; }
+  touch installed-binutils
+fi
+cd $BUILDDIR
+
+#---------------------------------------------------------------------------------
+# build and install just the c compiler
+#---------------------------------------------------------------------------------
+mkdir -p $target/gcc
+cd $target/gcc
+
+if [ ! -f configured-gcc ]
+then
+	CFLAGS="$cflags" \
+	CXXFLAGS="$cflags" \
+	LDFLAGS="$ldflags" \
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	CXXFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	LDFLAGS_FOR_TARGET="" \
+	../../gcc-$GCC_VER/configure \
+		--enable-languages=c,c++ \
+		--with-gnu-as --with-gnu-ld --with-gcc \
+		--with-march=armv8\
+		--enable-cxx-flags='-ffunction-sections' \
+		--disable-libstdcxx-verbose \
+		--enable-poison-system-directories \
+		--enable-interwork --enable-multilib \
+		--enable-threads --disable-win32-registry --disable-nls --disable-debug\
+		--disable-libmudflap --disable-libssp --disable-libgomp \
+		--disable-libstdcxx-pch \
+		--enable-libstdcxx-time \
+		--target=$target \
+		--with-newlib \
+		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
+		--prefix=$prefix \
+		--enable-lto $plugin_ld\
+		--with-system-zlib \
+		--with-bugurl="https://github.com/devkitPro/buildscripts/issues" --with-pkgversion="devkitA64 release 9" \
+		$CROSS_PARAMS \
+		$CROSS_GCC_PARAMS \
+		|| { echo "Error configuring gcc"; exit 1; }
+	touch configured-gcc
+fi
+
+if [ ! -f built-gcc ]
+then
+	$MAKE all-gcc || { echo "Error building gcc stage1"; exit 1; }
+	touch built-gcc
+fi
+
+if [ ! -f installed-gcc ]
+then
+	$MAKE install-gcc || { echo "Error installing gcc"; exit 1; }
+	touch installed-gcc
+fi
+
+
+unset CFLAGS
+cd $BUILDDIR
+
+OLD_CC=$CC
+OLDCXX=$CXX
+unset CC
+unset CXX
+
+#---------------------------------------------------------------------------------
+# build and install newlib
+#---------------------------------------------------------------------------------
+mkdir -p $target/newlib
+cd $target/newlib
+
+if [ ! -f configured-newlib ]
+then
+	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
+	../../newlib-$NEWLIB_VER/configure \
+	--disable-newlib-supplied-syscalls \
+	--enable-newlib-mb \
+	--disable-newlib-wide-orient \
+	--target=$target \
+	--prefix=$prefix \
+	|| { echo "Error configuring newlib"; exit 1; }
+	touch configured-newlib
+fi
+
+if [ ! -f built-newlib ]
+then
+	$MAKE || { echo "Error building newlib"; exit 1; }
+	touch built-newlib
+fi
+
+
+if [ ! -f installed-newlib ]
+then
+	$MAKE install -j1 || { echo "Error installing newlib"; exit 1; }
+	touch installed-newlib
+fi
+
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
+#---------------------------------------------------------------------------------
+# build and install the final compiler
+#---------------------------------------------------------------------------------
+
+cd $BUILDDIR
+
+cd $target/gcc
+
+if [ ! -f built-stage2 ]
+then
+	$MAKE all || { echo "Error building gcc stage2"; exit 1; }
+	touch built-stage2
+fi
+
+if [ ! -f installed-stage2 ]
+then
+	$MAKE install || { echo "Error installing gcc stage2"; exit 1; }
+	touch installed-stage2
+fi
+
+rm -fr $prefix/$target/sys-include
+
+cd $BUILDDIR
+
+#---------------------------------------------------------------------------------
+# build and install the debugger
+#---------------------------------------------------------------------------------
+mkdir -p $target/gdb
+cd $target/gdb
+
+PLATFORM=`uname -s`
+
+if [ ! -f configured-gdb ]
+then
+	CFLAGS="$cflags" \
+	CXXFLAGS="$cflags" \
+	LDFLAGS="$ldflags" \
+	../../gdb-$GDB_VER/configure \
+	--disable-nls --prefix=$prefix --target=$target --disable-werror \
+	$CROSS_PARAMS \
+	|| { echo "Error configuring gdb"; exit 1; }
+	touch configured-gdb
+fi
+
+if [ ! -f built-gdb ]
+then
+	$MAKE || { echo "Error building gdb"; exit 1; }
+	touch built-gdb
+fi
+
+if [ ! -f installed-gdb ]
+then
+	$MAKE install || { echo "Error installing gdb"; exit 1; }
+	touch installed-gdb
+fi
+
+#---------------------------------------------------------------------------------
+# copy base rulesets
+#---------------------------------------------------------------------------------
+cp -v $BUILDSCRIPTDIR/dka64/rules/* $prefix

dka64/scripts/build-libs.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+export DEVKITPRO=$TOOLPATH
+
+cd $BUILDDIR/libnx-$LIBNX_VER
+$MAKE || { echo "error building libnx"; exit 1; }
+$MAKE install || { echo "error installing libnx"; exit 1; }

dka64/scripts/build-tools.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+cd $BUILDDIR
+
+for archive in $hostarchives
+do
+	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
+	cd $BUILDDIR/$dir
+	if [ ! -f configured ]; then
+		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$toolsprefix $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
+		touch configured
+	fi
+	if [ ! -f built ]; then
+		$MAKE || { echo "error building $dir"; exit 1; }
+		touch built
+	fi
+	if [ ! -f installed ]; then
+		$MAKE install || { echo "error installing $dir"; exit 1; }
+		touch installed
+	fi
+done

dkarm-eabi/crtls/3dsx.ld

@@ -40,7 +40,9 @@ SECTIONS
 
 	/* =========== RODATA section =========== */
 
-	.rodata ALIGN(0x1000) :
+	. = ALIGN(0x1000);
+
+	.rodata :
 	{
 		*(.rodata)
 		*(.roda)
@@ -58,7 +60,9 @@ SECTIONS
 
 	/* =========== DATA section =========== */
 
-	.data ALIGN(0x1000) :
+	. = ALIGN(0x1000);
+
+	.data :
 	{
 		*(.data)
 		*(.data.*)

dkarm-eabi/crtls/ds_arm7.ld

@@ -45,6 +45,7 @@ SECTIONS
 		*.twl*(.data)
 		*.twl*(.data.*)
 		*.twl*(.gnu.linkonce.d*)
+		. = ALIGN(4);
 		__arm7i_end__ = .;
 	} >twl_iwram AT>twl_ewram :arm7i
 
@@ -56,6 +57,7 @@ SECTIONS
 		*.twl.*(.gnu.linkonce.b*)
 		*.twl.*(.bss*)
 		*.twl.*(COMMON)
+		. = ALIGN(4);
 		__twl_bss_end__ = .;
 	} >twl_iwram :NONE
 

dkarm-eabi/crtls/ds_arm7_crt0.s

@@ -51,12 +51,12 @@ _start:
 	sub	r1, r1, r0
 	bl	ClearMem
 
-#ifndef VRAM
 	cmp	r10, #1
 	bne	NotTWL
 	ldr	r1, =__dsimode		@ set DSi mode flag
 	strb	r10, [r1]
 
+#ifndef VRAM
 	ldr	r1, =0x02ffe1d8		@ Get ARM7i LMA from header
 	ldr	r1, [r1]
 	ldr	r2, =__arm7i_start__

dkarm-eabi/crtls/ds_arm7_vram.ld

@@ -40,7 +40,7 @@ SECTIONS
 
 	.text :   /* ALIGN (4): */
 	{
-		*(.text .stub .text.* .gnu.linkonce.t.*)
+		*(.text .stub .text.* .twl .gnu.linkonce.t.*)
 		KEEP (*(.text.*personality*))
 		/* .gnu.warning sections are handled specially by elf32.em.  */
 		*(.gnu.warning)
@@ -139,13 +139,14 @@ SECTIONS
 	__arm7_end__ = .;
 
 
-	.bss ALIGN(4) :
+	.bss ALIGN(4) (NOLOAD) :
 	{
 		__bss_start = ABSOLUTE(.);
 		__bss_start__ = ABSOLUTE(.);
 		*(.dynbss)
 		*(.gnu.linkonce.b*)
 		*(.bss*)
+		*(.twl_bss)
 		*(COMMON)
 		. = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
 		__bss_end__ = ABSOLUTE(.);

dkarm-eabi/crtls/ds_arm9.ld

@@ -186,8 +186,7 @@ SECTIONS
 	{
 		__vectors_lma = LOADADDR(.vectors);
 		__vectors_start = ABSOLUTE(.);
-		*(.vectors)
+		KEEP(*(.vectors .vectors.*))
-		*.vectors*(.text .stub .text.*)
 		. = ALIGN(4);
 		__vectors_end = ABSOLUTE(.);
 	} >vectors AT>ewram :vectors = 0xff

dkarm-eabi/patches/gcc-6.3.0.patch

@@ -1,120 +0,0 @@
-diff -NBaur gcc-6.2.0/gcc/config/arm/t-arm-elf gcc-6.2.0-arm/gcc/config/arm/t-arm-elf
---- gcc-6.2.0/gcc/config/arm/t-arm-elf	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.2.0-arm/gcc/config/arm/t-arm-elf	2016-12-10 12:16:20.076000000 +0000
-@@ -16,11 +16,19 @@
- # along with GCC; see the file COPYING3.  If not see
- # <http://www.gnu.org/licenses/>.
- 
--MULTILIB_OPTIONS     = marm/mthumb
--MULTILIB_DIRNAMES    = arm thumb
-+MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k mfloat-abi=hard
-+MULTILIB_DIRNAMES    = thumb be armv6k fpu
- MULTILIB_EXCEPTIONS  = 
- MULTILIB_MATCHES     =
- 
-+MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard 
-+
-+
-+MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
-+MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
-+
-+
-+
- #MULTILIB_OPTIONS     += mcpu=fa526/mcpu=fa626/mcpu=fa606te/mcpu=fa626te/mcpu=fmp626/mcpu=fa726te
- #MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
- #MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
-@@ -38,9 +46,9 @@
- # Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
- # express that here?  Also, we really need architecture v5e or later
- # (mcrr etc).
--MULTILIB_OPTIONS       += mfloat-abi=hard
--MULTILIB_DIRNAMES      += fpu
--MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
-+#MULTILIB_OPTIONS       += mfloat-abi=hard
-+#MULTILIB_DIRNAMES      += fpu
-+#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
- #MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
- 
-diff -NBaur gcc-6.2.0/gcc/config/arm/unknown-elf.h gcc-6.2.0-arm/gcc/config/arm/unknown-elf.h
---- gcc-6.2.0/gcc/config/arm/unknown-elf.h	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.2.0-arm/gcc/config/arm/unknown-elf.h	2016-09-07 08:58:29.977682360 +0100
-@@ -29,7 +29,7 @@
- #endif
- 
- /* Now we define the strings used to build the spec file.  */
--#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
-+#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
- 
- #undef  STARTFILE_SPEC
- #define STARTFILE_SPEC	\
-@@ -97,4 +97,4 @@
-    udivmoddi4, which will depend on the exception unwind routines,
-    which will depend on abort, which is defined in libc.  */ 
- #undef LINK_GCC_C_SEQUENCE_SPEC
--#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
-+#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
-diff -NBaur gcc-6.2.0/gcc/gcc.c gcc-6.2.0-arm/gcc/gcc.c
---- gcc-6.2.0/gcc/gcc.c	2016-08-15 12:19:34.000000000 +0100
-+++ gcc-6.2.0-arm/gcc/gcc.c	2016-09-07 08:58:29.981682360 +0100
-@@ -778,6 +778,11 @@
- #endif
- #endif
- 
-+#ifndef LIBGLOSS_SPEC
-+# define LIBGLOSS_SPEC "-lsysbase"
-+#endif
-+
-+
- /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
- #ifndef STARTFILE_SPEC
- #define STARTFILE_SPEC  \
-@@ -1062,6 +1067,7 @@
- static const char *lib_spec = LIB_SPEC;
- static const char *link_gomp_spec = "";
- static const char *libgcc_spec = LIBGCC_SPEC;
-+static const char *libgloss_spec = LIBGLOSS_SPEC;
- static const char *endfile_spec = ENDFILE_SPEC;
- static const char *startfile_spec = STARTFILE_SPEC;
- static const char *linker_name_spec = LINKER_NAME;
-@@ -1563,6 +1569,7 @@
-   INIT_STATIC_SPEC ("lib",			&lib_spec),
-   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
-   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
-+  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
-   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
-   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
-   INIT_STATIC_SPEC ("version",			&compiler_version),
-diff -NBaur gcc-6.2.0/libgcc/config/arm/t-bpabi gcc-6.2.0-arm/libgcc/config/arm/t-bpabi
---- gcc-6.2.0/libgcc/config/arm/t-bpabi	2012-08-17 16:06:06.000000000 +0100
-+++ gcc-6.2.0-arm/libgcc/config/arm/t-bpabi	2016-09-07 08:58:29.985682360 +0100
-@@ -17,4 +17,4 @@
- # On ARM, specifying -fnon-call-exceptions will needlessly pull in
- # the unwinder in simple programs which use 64-bit division.  Omitting
- # the option is safe.
--LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
-+LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
-diff -NBaur gcc-6.2.0/libgcc/crtstuff.c gcc-6.2.0-arm/libgcc/crtstuff.c
---- gcc-6.2.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.2.0-arm/libgcc/crtstuff.c	2016-09-07 08:58:29.985682360 +0100
-@@ -47,7 +47,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
--
-+#define USED_FOR_TARGET
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-    this will have to do.  */
-diff -NBaur gcc-6.2.0/libgcc/Makefile.in gcc-6.2.0-arm/libgcc/Makefile.in
---- gcc-6.2.0/libgcc/Makefile.in	2016-02-25 12:23:52.000000000 +0000
-+++ gcc-6.2.0-arm/libgcc/Makefile.in	2016-09-07 08:58:29.989682360 +0100
-@@ -820,7 +820,7 @@
- # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
- # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
- 
--c_flags := -fexceptions
-+c_flags := -fno-exceptions
- 
- ifeq ($(enable_shared),yes)
- 

dkarm-eabi/patches/gcc-8.1.0.patch

@@ -0,0 +1,291 @@
+diff -NBaur gcc-8.1.0/gcc/config/arm/arm-cpus.in gcc-8.1.0-arm/gcc/config/arm/arm-cpus.in
+--- gcc-8.1.0/gcc/config/arm/arm-cpus.in	2018-01-11 15:21:26.000000000 +0000
++++ gcc-8.1.0-arm/gcc/config/arm/arm-cpus.in	2018-05-11 01:05:33.648236777 +0000
+@@ -393,7 +393,7 @@
+  tune for mpcore
+  tune flags CO_PROC
+  base 6K
+- isa ARMv6k
++ isa ARMv6k VFPv2 FP_DBL
+  option fp add VFPv2 FP_DBL
+  optalias vfpv2 fp
+  option nofp remove ALL_FP
+diff -NBaur gcc-8.1.0/gcc/config/arm/t-arm-elf gcc-8.1.0-arm/gcc/config/arm/t-arm-elf
+--- gcc-8.1.0/gcc/config/arm/t-arm-elf	2018-01-11 15:21:26.000000000 +0000
++++ gcc-8.1.0-arm/gcc/config/arm/t-arm-elf	2018-05-10 23:15:13.124566279 +0000
+@@ -1,4 +1,4 @@
+-# Copyright (C) 1998-2018 Free Software Foundation, Inc.
++# Copyright (C) 1998-2017 Free Software Foundation, Inc.
+ #
+ # This file is part of GCC.
+ #
+@@ -16,110 +16,83 @@
+ # along with GCC; see the file COPYING3.  If not see
+ # <http://www.gnu.org/licenses/>.
+ 
+-# Build a very basic set of libraries that should cater for most cases.
+-
+-# Single-precision floating-point is NOT supported; we don't build a
+-# suitable library for that.  Use the rm-profile config in that case.
+-
+-# PART 1 - Useful groups of options
+-
+-dp_fpus		:= vfp vfpv2 vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16 \
+-		   neon neon-vfpv3 neon-fp16 vfpv4 neon-vfpv4 vfpv4-d16 \
+-		   fpv5-d16 fp-armv8 neon-fp-armv8 crypto-neon-fp-armv8 \
+-		   vfp3
+-
+-sp_fpus		:= vfpv3xd vfpv3xd-fp16  fpv4-sp-d16 fpv5-sp-d16
+-
+-v7a_fps		:= vfpv3 vfpv3-fp16 vfpv4 simd neon-fp16 neon-vfpv4
+-v7ve_fps	:= vfpv3-d16 vfpv3 vfpv3-d16-fp16 vfpv3-fp16 vfpv4 neon \
+-		   neon-fp16 simd
+-
+-# Not all these permutations exist for all architecture variants, but
+-# it seems to work ok.
+-v8_fps		:= simd fp16 crypto fp16+crypto dotprod fp16fml
+-
+-# We don't do anything special with these.  Pre-v4t probably doesn't work.
+-all_early_nofp	:= armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5t
+-
+-all_early_arch	:= armv5e armv5tej armv6 armv6j armv6k armv6z armv6kz \
+-		   armv6zk armv6t2 iwmmxt iwmmxt2
+-
+-all_v7_a_r	:= armv7-a armv7ve armv7-r
+-
+-all_v8_archs	:= armv8-a armv8-a+crc armv8.1-a armv8.2-a armv8.3-a armv8.4-a
+-
+-# No floating point variants, require thumb1 softfp
+-all_nofp_t	:= armv6-m armv6s-m armv8-m.base
+-
+-all_nofp_t2	:= armv7-m
+-
+-all_sp_only	:= armv7e-m armv8-m.main
+-
+-MULTILIB_OPTIONS     =
+-MULTILIB_DIRNAMES    =
++MULTILIB_OPTIONS     = mthumb mbig-endian march=armv6k mfloat-abi=hard
++MULTILIB_DIRNAMES    = thumb be armv6k fpu
+ MULTILIB_EXCEPTIONS  = 
+ MULTILIB_MATCHES     =
+-MULTILIB_REUSE	     =
+-
+-# PART 2 - multilib build rules
+-
+-MULTILIB_OPTIONS     += marm/mthumb
+-MULTILIB_DIRNAMES    += arm thumb
+-
+-MULTILIB_OPTIONS     += mfpu=auto
+-MULTILIB_DIRNAMES    += autofp
+-
+-MULTILIB_OPTIONS     += march=armv5te+fp/march=armv7+fp
+-MULTILIB_DIRNAMES    += v5te v7
+-
+-MULTILIB_OPTIONS     += mfloat-abi=hard
+-MULTILIB_DIRNAMES    += fpu
+-
+-# Build a total of 4 library variants (base options plus the following):
+-MULTILIB_REQUIRED    += mthumb
+-MULTILIB_REQUIRED    += marm/mfpu=auto/march=armv5te+fp/mfloat-abi=hard
+-MULTILIB_REQUIRED    += mthumb/mfpu=auto/march=armv7+fp/mfloat-abi=hard
+-
+-# PART 3 - Match rules
+-
+-# Map all supported FPUs onto mfpu=auto
+-MULTILIB_MATCHES     += $(foreach FPU, $(dp_fpus), \
+-			  mfpu?auto=mfpu?$(FPU))
+-
+-MULTILIB_MATCHES     += march?armv5te+fp=march?armv5te
+-
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_early_arch), \
+-		          march?armv5te+fp=march?$(ARCH) \
+-			  march?armv5te+fp=march?$(ARCH)+fp)
+-
+-MULTILIB_MATCHES     += march?armv7+fp=march?armv7
+-
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7a_fps), \
+-		          march?armv7+fp=march?armv7-a+$(FPARCH))
+ 
+-MULTILIB_MATCHES     += $(foreach FPARCH, $(v7ve_fps), \
+-		          march?armv7+fp=march?armv7ve+$(FPARCH))
++MULTILIB_REQUIRED    = mthumb mbig-endian mthumb/mbig-endian march=armv6k/mfloat-abi=hard 
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v7_a_r), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  march?armv7+fp=march?$(ARCH)+fp)
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, $(all_v8_archs), \
+-			  march?armv7+fp=march?$(ARCH) \
+-			  $(foreach FPARCH, $(v8_fps), \
+-			    march?armv7+fp=march?$(ARCH)+$(FPARCH)))
++MULTILIB_MATCHES    += march?armv6k=mtune?mpcore
++MULTILIB_MATCHES    += march?armv6k=mcpu?mpcore
+ 
+-MULTILIB_MATCHES     += $(foreach ARCH, armv7e-m armv8-m.mainline, \
+-			  march?armv7+fp=march?$(ARCH)+fp.dp)
+ 
+-# PART 4 - Reuse rules
+ 
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto
+-MULTILIB_REUSE	     += mthumb=mthumb/mfpu.auto/march.armv5te+fp
+-MULTILIB_REUSE	     += mthumb=mthumb/march.armv5te+fp
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=marm/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += marm/mfpu.auto/march.armv5te+fp/mfloat-abi.hard=mfpu.auto/march.armv5te+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mthumb/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=mfpu.auto/march.armv7+fp/mfloat-abi.hard
+-MULTILIB_REUSE	     += mthumb/mfpu.auto/march.armv7+fp/mfloat-abi.hard=march.armv7+fp/mfloat-abi.hard
++#MULTILIB_OPTIONS     += mcpu=fa526/mcpu=fa626/mcpu=fa606te/mcpu=fa626te/mcpu=fmp626/mcpu=fa726te
++#MULTILIB_DIRNAMES    += fa526 fa626 fa606te fa626te fmp626 fa726te
++#MULTILIB_EXCEPTIONS  += *mthumb*/*mcpu=fa526 *mthumb*/*mcpu=fa626
++
++#MULTILIB_OPTIONS      += march=armv7
++#MULTILIB_DIRNAMES     += thumb2
++#MULTILIB_EXCEPTIONS   += march=armv7* marm/*march=armv7*
++#MULTILIB_MATCHES      += march?armv7=march?armv7-a
++#MULTILIB_MATCHES      += march?armv7=march?armv7-r
++#MULTILIB_MATCHES      += march?armv7=march?armv7-m
++#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-a8
++#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-r4
++#MULTILIB_MATCHES      += march?armv7=mcpu?cortex-m3
++
++# Not quite true.  We can support hard-vfp calling in Thumb2, but how do we
++# express that here?  Also, we really need architecture v5e or later
++# (mcrr etc).
++#MULTILIB_OPTIONS       += mfloat-abi=hard
++#MULTILIB_DIRNAMES      += fpu
++#MULTILIB_EXCEPTIONS    += *mthumb/*mfloat-abi=hard*
++#MULTILIB_EXCEPTIONS    += *mcpu=fa526/*mfloat-abi=hard*
++#MULTILIB_EXCEPTIONS    += *mcpu=fa626/*mfloat-abi=hard*
++
++# MULTILIB_OPTIONS    += mcpu=ep9312
++# MULTILIB_DIRNAMES   += ep9312
++# MULTILIB_EXCEPTIONS += *mthumb/*mcpu=ep9312*
++#	
++# MULTILIB_OPTIONS     += mlittle-endian/mbig-endian
++# MULTILIB_DIRNAMES    += le be
++# MULTILIB_MATCHES     += mbig-endian=mbe mlittle-endian=mle
++# 
++# MULTILIB_OPTIONS    += mfloat-abi=hard/mfloat-abi=soft
++# MULTILIB_DIRNAMES   += fpu soft
++# MULTILIB_EXCEPTIONS += *mthumb/*mfloat-abi=hard*
++# 
++# MULTILIB_OPTIONS    += mno-thumb-interwork/mthumb-interwork
++# MULTILIB_DIRNAMES   += normal interwork
++# 
++# MULTILIB_OPTIONS    += fno-leading-underscore/fleading-underscore
++# MULTILIB_DIRNAMES   += elf under
++# 
++# MULTILIB_OPTIONS    += mcpu=arm7
++# MULTILIB_DIRNAMES   += nofmult
++# MULTILIB_EXCEPTIONS += *mthumb*/*mcpu=arm7*
++# # Note: the multilib_exceptions matches both -mthumb and
++# # -mthumb-interwork
++# #
++# # We have to match all the arm cpu variants which do not have the
++# # multiply instruction and treat them as if the user had specified
++# # -mcpu=arm7.  Note that in the following the ? is interpreted as
++# # an = for the purposes of matching command line options.
++# # FIXME: There ought to be a better way to do this.
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7d
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7di
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm70
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm700
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm700i
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm710
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm710c
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7100
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7500
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm7500fe
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm6
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm60
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm600
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm610
++# MULTILIB_MATCHES    += mcpu?arm7=mcpu?arm620
+diff -NBaur gcc-8.1.0/gcc/config/arm/unknown-elf.h gcc-8.1.0-arm/gcc/config/arm/unknown-elf.h
+--- gcc-8.1.0/gcc/config/arm/unknown-elf.h	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-arm/gcc/config/arm/unknown-elf.h	2018-05-10 23:01:02.432676190 +0000
+@@ -29,7 +29,7 @@
+ #endif
+ 
+ /* Now we define the strings used to build the spec file.  */
+-#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s crt0%O%s"
++#define UNKNOWN_ELF_STARTFILE_SPEC	" crti%O%s crtbegin%O%s"
+ 
+ #undef  STARTFILE_SPEC
+ #define STARTFILE_SPEC	\
+@@ -93,4 +93,9 @@
+    udivmoddi4, which will depend on the exception unwind routines,
+    which will depend on abort, which is defined in libc.  */ 
+ #undef LINK_GCC_C_SEQUENCE_SPEC
+-#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
++#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
++
++/* The system headers under devkitARM are C++-aware.  */
++#undef NO_IMPLICIT_EXTERN_C
++#define NO_IMPLICIT_EXTERN_C
++
+diff -NBaur gcc-8.1.0/gcc/gcc.c gcc-8.1.0-arm/gcc/gcc.c
+--- gcc-8.1.0/gcc/gcc.c	2018-02-09 06:44:06.000000000 +0000
++++ gcc-8.1.0-arm/gcc/gcc.c	2018-05-10 23:01:02.440676328 +0000
+@@ -786,6 +786,11 @@
+ #endif
+ #endif
+ 
++#ifndef LIBGLOSS_SPEC
++# define LIBGLOSS_SPEC "-lsysbase"
++#endif
++
++
+ /* config.h can define STARTFILE_SPEC to override the default crt0 files.  */
+ #ifndef STARTFILE_SPEC
+ #define STARTFILE_SPEC  \
+@@ -1081,6 +1086,7 @@
+ static const char *lib_spec = LIB_SPEC;
+ static const char *link_gomp_spec = "";
+ static const char *libgcc_spec = LIBGCC_SPEC;
++static const char *libgloss_spec = LIBGLOSS_SPEC;
+ static const char *endfile_spec = ENDFILE_SPEC;
+ static const char *startfile_spec = STARTFILE_SPEC;
+ static const char *linker_name_spec = LINKER_NAME;
+@@ -1577,6 +1583,7 @@
+   INIT_STATIC_SPEC ("lib",			&lib_spec),
+   INIT_STATIC_SPEC ("link_gomp",		&link_gomp_spec),
+   INIT_STATIC_SPEC ("libgcc",			&libgcc_spec),
++  INIT_STATIC_SPEC ("libgloss",			&libgloss_spec),
+   INIT_STATIC_SPEC ("startfile",		&startfile_spec),
+   INIT_STATIC_SPEC ("cross_compile",		&cross_compile),
+   INIT_STATIC_SPEC ("version",			&compiler_version),
+diff -NBaur gcc-8.1.0/libgcc/config/arm/t-bpabi gcc-8.1.0-arm/libgcc/config/arm/t-bpabi
+--- gcc-8.1.0/libgcc/config/arm/t-bpabi	2012-08-17 15:06:06.000000000 +0000
++++ gcc-8.1.0-arm/libgcc/config/arm/t-bpabi	2018-05-10 23:01:02.440676328 +0000
+@@ -17,4 +17,4 @@
+ # On ARM, specifying -fnon-call-exceptions will needlessly pull in
+ # the unwinder in simple programs which use 64-bit division.  Omitting
+ # the option is safe.
+-LIB2_DIVMOD_EXCEPTION_FLAGS := -fexceptions
++LIB2_DIVMOD_EXCEPTION_FLAGS := -fno-exceptions
+diff -NBaur gcc-8.1.0/libgcc/crtstuff.c gcc-8.1.0-arm/libgcc/crtstuff.c
+--- gcc-8.1.0/libgcc/crtstuff.c	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-arm/libgcc/crtstuff.c	2018-05-10 23:01:02.440676328 +0000
+@@ -47,7 +47,7 @@
+ 
+ /* Target machine header files require this define. */
+ #define IN_LIBGCC2
+-
++#define USED_FOR_TARGET
+ /* FIXME: Including auto-host is incorrect, but until we have
+    identified the set of defines that need to go into auto-target.h,
+    this will have to do.  */
+diff -NBaur gcc-8.1.0/libgcc/Makefile.in gcc-8.1.0-arm/libgcc/Makefile.in
+--- gcc-8.1.0/libgcc/Makefile.in	2018-01-03 10:03:58.000000000 +0000
++++ gcc-8.1.0-arm/libgcc/Makefile.in	2018-05-10 23:01:02.440676328 +0000
+@@ -847,7 +847,7 @@
+ # libgcc_eh.a, only LIB2ADDEH matters.  If we do, only LIB2ADDEHSTATIC and
+ # LIB2ADDEHSHARED matter.  (Usually all three are identical.)
+ 
+-c_flags := -fexceptions
++c_flags := -fno-exceptions
+ 
+ ifeq ($(enable_shared),yes)
+ 

dkarm-eabi/patches/gdb-7.11.patch

@@ -1,32 +0,0 @@
-diff -NBaur gdb-7.11/gdb/Makefile.in gdb-7.11-arm/gdb/Makefile.in
---- gdb-7.11/gdb/Makefile.in	2016-02-24 09:55:15.000000000 +0000
-+++ gdb-7.11-arm/gdb/Makefile.in	2016-05-13 15:06:03.629019640 +0100
-@@ -2726,10 +2726,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@
-+@GMAKE_TRUE@override POSTCOMPILE =
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -NBaur gdb-7.11/sim/common/Make-common.in gdb-7.11-arm/sim/common/Make-common.in
---- gdb-7.11/sim/common/Make-common.in	2016-02-10 03:19:39.000000000 +0000
-+++ gdb-7.11-arm/sim/common/Make-common.in	2016-05-13 15:06:03.633019640 +0100
-@@ -402,10 +402,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@
-+@GMAKE_TRUE@override POSTCOMPILE =
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)

dkarm-eabi/patches/gdb-8.0.patch

@@ -0,0 +1,441 @@
+diff --git a/gdb/Makefile.in b/gdb/Makefile.in
+index 1d2dbaf3f7..2d24f09c1b 100644
+--- a/gdb/Makefile.in
++++ b/gdb/Makefile.in
+@@ -779,6 +779,7 @@ ALL_64_TARGET_OBS = \
+ ALL_TARGET_OBS = \
+ 	arc-tdep.o \
+ 	arm.o \
++	arm-3ds-tdep.o \
+ 	arm-bsd-tdep.o \
+ 	arm-get-next-pcs.o \
+ 	arm-linux.o \
+@@ -2487,6 +2488,7 @@ ALLDEPFILES = \
+ 	amd64-tdep.c \
+ 	arc-tdep.c \
+ 	arm.c \
++	arm-3ds-tdep.c \
+ 	arm-bsd-tdep.c \
+ 	arm-get-next-pcs.c \
+ 	arm-linux.c \
+diff --git a/gdb/arm-3ds-tdep.c b/gdb/arm-3ds-tdep.c
+new file mode 100644
+index 0000000000..ad014e28db
+--- /dev/null
++++ b/gdb/arm-3ds-tdep.c
+@@ -0,0 +1,197 @@
++/* Target-dependent code for 3DS. */
++
++/* This uses code from GDB, which license is: */
++
++/*
++   Copyright (C) 2002-2017 Free Software Foundation, Inc.
++
++   This file is part of GDB.
++
++   This program is free software; you can redistribute it and/or modify
++   it under the terms of the GNU General Public License as published by
++   the Free Software Foundation; either version 3 of the License, or
++   (at your option) any later version.
++
++   This program is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++   GNU General Public License for more details.
++
++   You should have received a copy of the GNU General Public License
++   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
++
++#include "defs.h"
++#include "gdbcore.h"
++#include "target.h"
++#include "osabi.h"
++#include "xml-syscall.h"
++
++#include "arch/arm.h"
++#include "arch/arm-get-next-pcs.h"
++#include "arm-tdep.h"
++
++static const gdb_byte arm_3ds_arm_le_breakpoint[] = {0xff, 0x00, 0x00, 0xef};
++static const gdb_byte arm_3ds_thumb_le_breakpoint[] = {0xff, 0xdf};
++
++static CORE_ADDR
++  arm_3ds_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self);
++
++/* Operation function pointers for get_next_pcs.  */
++static struct arm_get_next_pcs_ops arm_3ds_get_next_pcs_ops = {
++  arm_get_next_pcs_read_memory_unsigned_integer,
++  arm_3ds_get_next_pcs_syscall_next_pc,
++  arm_get_next_pcs_addr_bits_remove,
++  arm_get_next_pcs_is_thumb,
++  NULL,
++};
++
++static CORE_ADDR
++arm_3ds_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self)
++{
++  CORE_ADDR next_pc = 0;
++  CORE_ADDR pc = regcache_read_pc (self->regcache);
++  int is_thumb = arm_is_thumb (self->regcache);
++  ULONGEST svc_number = 0;
++
++  if (is_thumb)
++    {
++      next_pc = pc + 2;
++    }
++  else
++    {
++      next_pc = pc + 4;
++    }
++
++  /* Addresses for calling Thumb functions have the bit 0 set.  */
++  if (is_thumb)
++    next_pc = MAKE_THUMB_ADDR (next_pc);
++
++  return next_pc;
++}
++
++static VEC (CORE_ADDR) *
++arm_3ds_software_single_step (struct regcache *regcache)
++{
++  struct gdbarch *gdbarch = get_regcache_arch (regcache);
++  struct arm_get_next_pcs next_pcs_ctx;
++  CORE_ADDR pc;
++  int i;
++  VEC (CORE_ADDR) *next_pcs = NULL;
++  struct cleanup *old_chain;
++
++  /* If the target does have hardware single step, GDB doesn't have
++     to bother software single step.  */
++  if (target_can_do_single_step () == 1)
++    return NULL;
++
++  old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
++
++  arm_get_next_pcs_ctor (&next_pcs_ctx,
++			 &arm_3ds_get_next_pcs_ops,
++			 gdbarch_byte_order (gdbarch),
++			 gdbarch_byte_order_for_code (gdbarch),
++			 1,
++			 regcache);
++
++  next_pcs = arm_get_next_pcs (&next_pcs_ctx);
++
++  for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
++    {
++      pc = gdbarch_addr_bits_remove (gdbarch, pc);
++      VEC_replace (CORE_ADDR, next_pcs, i, pc);
++    }
++
++  discard_cleanups (old_chain);
++
++  return next_pcs;
++}
++
++static LONGEST
++arm_3ds_get_syscall_number (struct gdbarch *gdbarch,
++			      ptid_t ptid)
++{
++  struct regcache *regs = get_thread_regcache (ptid);
++
++  ULONGEST pc;
++  ULONGEST cpsr;
++  ULONGEST t_bit = arm_psr_thumb_bit (gdbarch);
++  int is_thumb;
++  ULONGEST svc_number = -1;
++
++  regcache_cooked_read_unsigned (regs, ARM_PC_REGNUM, &pc);
++  regcache_cooked_read_unsigned (regs, ARM_PS_REGNUM, &cpsr);
++  is_thumb = (cpsr & t_bit) != 0;
++
++  if (is_thumb)
++    {
++      enum bfd_endian byte_order_for_code =
++	gdbarch_byte_order_for_code (gdbarch);
++
++      /* PC gets incremented before the syscall-stop, so read the
++	 previous instruction.  */
++      unsigned long this_instr =
++	read_memory_unsigned_integer (pc - 2, 2, byte_order_for_code);
++
++      unsigned long svc_operand = (0x00ff & this_instr);
++      svc_number = svc_operand;
++    }
++  else
++    {
++      enum bfd_endian byte_order_for_code =
++	gdbarch_byte_order_for_code (gdbarch);
++
++      /* PC gets incremented before the syscall-stop, so read the
++	 previous instruction.  */
++      unsigned long this_instr =
++	read_memory_unsigned_integer (pc - 4, 4, byte_order_for_code);
++
++      unsigned long svc_operand = (0x000000ff & this_instr);
++      svc_number = svc_operand;
++    }
++
++  if (svc_number == 0xfe)
++    {
++      regcache_cooked_read_unsigned (regs, 12, &svc_number);
++    }
++
++  return svc_number;
++}
++
++static void
++arm_3ds_init_abi (struct gdbarch_info info,
++			    struct gdbarch *gdbarch)
++{
++  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
++
++  switch (info.byte_order)
++    {
++    case BFD_ENDIAN_LITTLE:
++      tdep->arm_breakpoint = arm_3ds_arm_le_breakpoint;
++      tdep->thumb_breakpoint = arm_3ds_thumb_le_breakpoint;
++      tdep->arm_breakpoint_size = sizeof (arm_3ds_arm_le_breakpoint);
++      tdep->thumb_breakpoint_size = sizeof (arm_3ds_thumb_le_breakpoint);
++      break;
++
++    default:
++      internal_error (__FILE__, __LINE__,
++        _("arm_gdbarch_init: bad byte order"));
++    }
++  tdep->fp_model = ARM_FLOAT_VFP;
++
++  /* Single stepping.  */
++  set_gdbarch_software_single_step (gdbarch, arm_3ds_software_single_step);
++
++  /* `catch syscall' */
++  set_xml_syscall_file_name (gdbarch, "syscalls/arm-3ds.xml");
++  set_gdbarch_get_syscall_number (gdbarch, arm_3ds_get_syscall_number);
++}
++
++/* Provide a prototype to silence -Wmissing-prototypes.  */
++extern initialize_file_ftype _initialize_arm_3ds_tdep;
++
++void
++_initialize_arm_3ds_tdep (void)
++{
++  gdbarch_register_osabi (bfd_arch_arm, 0, GDB_OSABI_3DS,
++                          arm_3ds_init_abi);
++}
+diff --git a/gdb/configure.tgt b/gdb/configure.tgt
+index fdcb7b1d69..d8fd1622b8 100644
+--- a/gdb/configure.tgt
++++ b/gdb/configure.tgt
+@@ -119,8 +119,8 @@ arm*-*-symbianelf*)
+ 	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o arm-symbian-tdep.o"
+ 	;;
+ arm*-*-*)
+-	# Target: ARM embedded system
+-	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o"
++	# Target: ARM embedded system (+ 3DS)
++	gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o arm-3ds-tdep.o"
+ 	gdb_sim=../sim/arm/libsim.a
+ 	;;
+ 
+diff --git a/gdb/data-directory/Makefile.in b/gdb/data-directory/Makefile.in
+index 304d4b05c0..2cf8986d3a 100644
+--- a/gdb/data-directory/Makefile.in
++++ b/gdb/data-directory/Makefile.in
+@@ -63,7 +63,7 @@ GEN_SYSCALLS_FILES = \
+ 	sparc-linux.xml \
+ 	sparc64-linux.xml
+ 
+-SYSCALLS_FILES = gdb-syscalls.dtd freebsd.xml $(GEN_SYSCALLS_FILES)
++SYSCALLS_FILES = gdb-syscalls.dtd freebsd.xml arm-3ds.xml $(GEN_SYSCALLS_FILES)
+ 
+ PYTHON_DIR = python
+ PYTHON_INSTALL_DIR = $(DESTDIR)$(GDB_DATADIR)/$(PYTHON_DIR)
+diff --git a/gdb/defs.h b/gdb/defs.h
+index a0b586f401..a1508fd5b3 100644
+--- a/gdb/defs.h
++++ b/gdb/defs.h
+@@ -604,6 +604,7 @@ enum gdb_osabi
+   GDB_OSABI_LYNXOS178,
+   GDB_OSABI_NEWLIB,
+   GDB_OSABI_SDE,
++  GDB_OSABI_3DS,
+ 
+   GDB_OSABI_INVALID		/* keep this last */
+ };
+diff --git a/gdb/osabi.c b/gdb/osabi.c
+index 84fa9c0273..c1c4bb1672 100644
+--- a/gdb/osabi.c
++++ b/gdb/osabi.c
+@@ -79,6 +79,7 @@ static const struct osabi_names gdb_osabi_names[] =
+   { "LynxOS178", NULL },
+   { "Newlib", NULL },
+   { "SDE", NULL },
++  { "3DS", NULL },
+ 
+   { "<invalid>", NULL }
+ };
+diff --git a/gdb/syscalls/arm-3ds.xml b/gdb/syscalls/arm-3ds.xml
+new file mode 100644
+index 0000000000..48780b7bd5
+--- /dev/null
++++ b/gdb/syscalls/arm-3ds.xml
+@@ -0,0 +1,159 @@
++<?xml version="1.0"?>
++<!DOCTYPE syscalls_info SYSTEM "gdb-syscalls.dtd">
++<!-- This file is located inside GDB and is based on files which license are: -->
++<!-- Copyright (C) 2009-2017 Free Software Foundation, Inc.
++
++     Copying and distribution of this file, with or without modification,
++     are permitted in any medium without royalty provided the copyright
++     notice and this notice are preserved.  This file is offered as-is,
++     without any warranty. -->
++<syscalls_info>
++  <syscall name="ControlMemory" number="1" groups="memory"/>
++  <syscall name="QueryMemory" number="2" groups="memory"/>
++
++  <syscall name="ExitProcess" number="3" groups="process"/>
++  <syscall name="GetProcessAffinityMask" number="4" groups="process"/>
++  <syscall name="SetProcessAffinityMask" number="5" groups="process"/>
++  <syscall name="GetProcessIdealProcessor" number="6" groups="process"/>
++  <syscall name="SetProcessIdealProcessor" number="7" groups="process"/>
++
++  <syscall name="CreateThread" number="8" groups="thread"/>
++  <syscall name="ExitThread" number="9" groups="thread"/>
++  <syscall name="SleepThread" number="10" groups="thread"/>
++  <syscall name="GetThreadPriority" number="11" groups="thread"/>
++  <syscall name="SetThreadPriority" number="12" groups="thread"/>
++  <syscall name="GetThreadAffinityMask" number="13" groups="thread"/>
++  <syscall name="SetThreadAffinityMask" number="14" groups="thread"/> <!-- removed -->
++  <syscall name="GetThreadIdealProcessor" number="15" groups="thread"/>
++  <syscall name="SetThreadIdealProcessor" number="16" groups="thread"/> <!-- removed -->
++  <syscall name="GetCurrentProcessorNumber" number="17" groups="thread"/>
++  <syscall name="Run" number="18" groups="thread"/>
++
++  <syscall name="CreateMutex" number="19" groups="synchronization"/>
++  <syscall name="ReleaseMutex" number="20" groups="synchronization"/>
++  <syscall name="CreateSemaphore" number="21" groups="synchronization"/>
++  <syscall name="ReleaseSemaphore" number="22" groups="synchronization"/>
++  <syscall name="CreateEvent" number="23" groups="synchronization"/>
++  <syscall name="SignalEvent" number="24" groups="synchronization"/>
++  <syscall name="ClearEvent" number="25" groups="synchronization"/>
++  <syscall name="CreateTimer" number="26" groups="synchronization"/>
++  <syscall name="SetTimer" number="27" groups="synchronization"/>
++  <syscall name="CancelTimer" number="28" groups="synchronization"/>
++  <syscall name="ClearTimer" number="29" groups="synchronization"/>
++
++  <syscall name="CreateMemoryBlock" number="30" groups="memory,ipc"/>
++  <syscall name="MapMemoryBlock" number="31" groups="memory,ipc"/>
++  <syscall name="UnmapMemoryBlock" number="32" groups="memory,ipc"/>
++
++  <syscall name="CreateAddressArbiter" number="33" groups="memory,synchronization"/>
++  <syscall name="ArbitrateAddress" number="34" groups="memory,synchronization"/>
++
++  <syscall name="CloseHandle" number="35" groups="synchronization,ipc,memory,thread,process,debug"/>
++  <syscall name="WaitSynchronization" number="36" groups="synchronization,ipc,thread,process,debug"/>
++  <syscall name="WaitSynchronizationN" number="37" groups="synchronization,ipc,thread,process,debug"/>
++  <syscall name="SignalAndWait" number="38" groups="synchronization"/> <!-- removed -->
++  <syscall name="DuplicateHandle" number="39" groups="synchronization,ipc,memory,thread,process,debug"/>
++
++  <syscall name="GetSystemTick" number="40" groups="information"/>
++  <syscall name="GetHandleInfo" number="41" groups="information,synchronization,ipc,memory,thread,process,debug"/>
++  <syscall name="GetSystemInfo" number="42" groups="information"/>
++  <syscall name="GetProcessInfo" number="43" groups="information,process"/>
++  <syscall name="GetThreadInfo" number="44" groups="information,thread"/>
++
++  <syscall name="ConnectToPort" number="45" groups="ipc"/>
++  <syscall name="GetCFWInfo" number="46" groups="custom,information"/> <!-- deprecated -->
++  <syscall name="SendSyncRequest2" number="47" groups="ipc"/> <!-- removed -->
++  <syscall name="SendSyncRequest3" number="48" groups="ipc"/> <!-- removed -->
++  <syscall name="SendSyncRequest4" number="49" groups="ipc"/> <!-- removed -->
++  <syscall name="SendSyncRequest" number="50" groups="ipc"/> <!-- removed -->
++
++  <syscall name="OpenProcess" number="51" groups="process"/>
++  <syscall name="OpenThread" number="52" groups="thread"/>
++
++  <syscall name="GetProcessId" number="53" groups="process"/>
++  <syscall name="GetProcessIdOfThread" number="54" groups="process,thread"/>
++  <syscall name="GetThreadId" number="55" groups="thread"/>
++
++  <syscall name="GetResourceLimit" number="56" groups="process"/>
++  <syscall name="GetResourceLimitLimitValues" number="57" groups="process"/>
++  <syscall name="GetResourceLimitCurrentValues" number="58" groups="process"/>
++
++  <syscall name="GetThreadContext" number="59" groups="debug,thread"/> <!-- removed -->
++  <syscall name="Break" number="60" groups="debug"/>
++  <syscall name="OutputDebugString" number="61" groups="debug"/>
++  <syscall name="ControlPerformanceCounter" number="62" groups="debug"/>
++
++  <syscall name="CreatePort" number="71" groups="ipc"/>
++  <syscall name="CreateSessionToPort" number="72" groups="ipc"/>
++  <syscall name="CreateSession" number="73" groups="ipc"/>
++  <syscall name="AcceptSession" number="74" groups="ipc"/>
++  <syscall name="ReplyAndReceive1" number="75" groups="ipc"/>
++  <syscall name="ReplyAndReceive2" number="76" groups="ipc"/>
++  <syscall name="ReplyAndReceive3" number="77" groups="ipc"/>
++  <syscall name="ReplyAndReceive4" number="78" groups="ipc"/>
++  <syscall name="ReplyAndReceive" number="79" groups="ipc"/>
++
++  <syscall name="BindInterrupt" number="80" groups="io,synchronization"/>
++  <syscall name="UnbindInterrupt" number="81" groups="io,synchronization"/>
++  <syscall name="InvalidateProcessDataCache" number="82" groups="io,memory,process"/>
++  <syscall name="StoreProcessDataCache" number="83" groups="io,memory,process"/>
++  <syscall name="FlushProcessDataCache" number="84" groups="io,memory,process"/>
++
++  <syscall name="StartInterprocessDma" number="85" groups="io,memory,ipc"/>
++  <syscall name="StopDma" number="86" groups="io,memory,ipc"/>
++  <syscall name="GetDmaState" number="87" groups="io,memory,ipc"/>
++  <syscall name="RestartDma" number="88" groups="io,memory,ipc"/>
++
++  <syscall name="SetGpuProt" number="89" groups="io"/>
++  <syscall name="SetWifiEnabled" number="90" groups="io"/>
++
++  <syscall name="DebugActiveProcess" number="96" groups="debug,process"/>
++  <syscall name="BreakDebugProcess" number="97" groups="debug,process"/>
++  <syscall name="TerminateDebugProcess" number="98" groups="debug,process"/>
++  <syscall name="GetProcessDebugEvent" number="99" groups="debug"/>
++  <syscall name="ContinueDebugEvent" number="100" groups="debug"/>
++  <syscall name="GetProcessList" number="101" groups="information,debug,process"/>
++  <syscall name="GetThreadList" number="102" groups="information,debug,thread"/>
++  <syscall name="GetDebugThreadContext" number="103" groups="debug,thread"/>
++  <syscall name="SetDebugThreadContext" number="104" groups="debug,thread"/>
++  <syscall name="QueryDebugProcessMemory" number="105" groups="debug,process,memory"/>
++  <syscall name="ReadProcessMemory" number="106" groups="debug,process,memory"/>
++  <syscall name="WriteProcessMemory" number="107" groups="debug,process,memory"/>
++  <syscall name="SetHardwareBreakPoint" number="108" group="debug"/>
++  <syscall name="GetDebugThreadParam" number="109" group="debug,thread"/>
++
++  <syscall name="ControlProcessMemory" number="112" group="process,memory"/>
++  <syscall name="MapProcessMemory" number="113" group="process,memory"/>
++  <syscall name="UnmapProcessMemory" number="114" group="process,memory"/>
++
++  <syscall name="CreateCodeSet" number="115" group="process,memory"/>
++  <syscall name="RandomStub" number="116" group="process,memory"/> <!-- removed -->
++  <syscall name="CreateProcess" number="117" group="process"/>
++  <syscall name="TerminateProcess" number="118" group="process"/>
++  <syscall name="SetProcessResourceLimits" number="119" group="process"/>
++  <syscall name="CreateResourceLimit" number="120" group="process"/>
++  <syscall name="SetResourceLimitValues" number="121" group="process"/>
++  <syscall name="AddCodeSegment" number="122" group="process"/> <!-- removed -->
++
++  <syscall name="Backdoor" number="123" group="kernel"/>
++  <syscall name="KernelSetState" number="124" group="kernel"/>
++
++  <syscall name="QueryProcessMemory" number="125" group="process,memory"/>
++
++  <syscall name="CustomBackdoor" number="128" group="custom,kernel"/>
++
++  <syscall name="ConvertVAToPA" number="144" group="custom,io,memory"/>
++  <syscall name="FlushDataCacheRange" number="145" group="custom,io,memory"/>
++  <syscall name="FlushEntireDataCache" number="146" group="custom,io,memory"/>
++  <syscall name="InvalidateInstructionCacheRange" number="147" group="custom,io,memory"/>
++  <syscall name="InvalidateEntireInstructionCache" number="148" group="custom,io,memory"/>
++
++  <syscall name="MapProcessMemoryEx" number="160" group="custom,process,memory"/>
++  <syscall name="UnmapProcessMemoryEx" number="161" group="custom,process,memory"/>
++  <syscall name="ControlMemoryEx" number="162" group="custom,memory"/>
++
++  <syscall name="ControlService" number="176" group="custom,ipc"/>
++  <syscall name="CopyHandle" number="177" groups="custom,synchronization,ipc,thread,process,debug"/>
++  <syscall name="TranslateHandle" number="178" groups="custom,synchronization,ipc,thread,process,debug"/>
++
++</syscalls_info>
+

dkarm-eabi/rules/3ds_rules

@@ -4,7 +4,9 @@ endif
 
 include $(DEVKITARM)/base_rules
 
-PORTLIBS	:=	$(PORTLIBS_PATH)/armv6k $(PORTLIBS_PATH)/3ds
+PORTLIBS	:=	$(PORTLIBS_PATH)/3ds
+
+export PATH := $(PORTLIBS_PATH)/3ds/bin:$(PATH)
 
 CTRULIB	?=	$(DEVKITPRO)/libctru
 

dkarm-eabi/rules/base_tools

@@ -10,7 +10,8 @@ endif
 #---------------------------------------------------------------------------------
 # path to tools
 #---------------------------------------------------------------------------------
-export PATH	:=	$(DEVKITARM)/bin:$(PATH)
+DEVKITPATH=$(shell echo "$(DEVKITPRO)" | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+export PATH	:=	$(DEVKITPATH)/tools/bin:$(DEVKITPATH)/devkitARM/bin:$(PATH)
 
 #---------------------------------------------------------------------------------
 # the prefix on the compiler executables

dkarm-eabi/scripts/build-gcc.sh

@@ -60,10 +60,11 @@ then
 		--with-newlib \
 		--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 		--prefix=$prefix \
-		--enable-lto $plugin_ld\
+		--enable-lto\
 		--with-system-zlib \
-		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 46" \
+		--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitARM release 48" \
 		$CROSS_PARAMS \
+		$CROSS_GCC_PARAMS \
 		|| { echo "Error configuring gcc"; exit 1; }
 	touch configured-gcc
 fi
@@ -84,6 +85,11 @@ fi
 unset CFLAGS
 cd $BUILDDIR
 
+OLD_CC=$CC
+OLDCXX=$CXX
+unset CC
+unset CXX
+
 #---------------------------------------------------------------------------------
 # build and install newlib
 #---------------------------------------------------------------------------------
@@ -116,6 +122,9 @@ then
 	touch installed-newlib
 fi
 
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
 #---------------------------------------------------------------------------------
 # build and install the final compiler
 #---------------------------------------------------------------------------------
@@ -140,6 +149,39 @@ rm -fr $prefix/$target/sys-include
 
 cd $BUILDDIR
 
+
+#---------------------------------------------------------------------------------
+# copy base rulesets
+#---------------------------------------------------------------------------------
+cp -v $BUILDSCRIPTDIR/dkarm-eabi/rules/* $prefix
+
+
+#---------------------------------------------------------------------------------
+# set env variables
+#---------------------------------------------------------------------------------
+export DEVKITPRO=$TOOLPATH
+export DEVKITARM=$DEVKITPRO/devkitARM
+
+#---------------------------------------------------------------------------------
+# Install and build the crt0 files
+#---------------------------------------------------------------------------------
+
+cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/$target/lib/
+cd $prefix/$target/lib/
+
+
+$MAKE CRT=gba
+$MAKE CRT=gp32
+$MAKE CRT=er
+$MAKE CRT=gp32_gpsdk
+$MAKE CRT=ds_arm7
+$MAKE CRT=ds_arm9
+$MAKE CRT=ds_cart
+$MAKE ds_arm7_vram_crt0
+$MAKE 3dsx_crt0
+
+cd $BUILDDIR
+
 #---------------------------------------------------------------------------------
 # build and install the debugger
 #---------------------------------------------------------------------------------

dkarm-eabi/scripts/build-libs.sh

@@ -3,27 +3,6 @@
 export DEVKITPRO=$TOOLPATH
 export DEVKITARM=$DEVKITPRO/devkitARM
 
-#---------------------------------------------------------------------------------
-# copy base rulesets
-#---------------------------------------------------------------------------------
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/rules/* $prefix
-
-#---------------------------------------------------------------------------------
-# Install and build the gba crt
-#---------------------------------------------------------------------------------
-
-cp -v $BUILDSCRIPTDIR/dkarm-eabi/crtls/* $prefix/$target/lib/
-cd $prefix/$target/lib/
-$MAKE CRT=gba
-$MAKE CRT=gp32
-$MAKE CRT=er
-$MAKE CRT=gp32_gpsdk
-$MAKE CRT=ds_arm7
-$MAKE CRT=ds_arm9
-$MAKE CRT=ds_cart
-$MAKE ds_arm7_vram_crt0
-$MAKE 3dsx_crt0
-
 cd $BUILDDIR/libgba-$LIBGBA_VER
 $MAKE || { echo "error building libgba"; exit 1; }
 $MAKE install || { echo "error installing libgba"; exit 1; }

dkarm-eabi/scripts/build-tools.sh

@@ -6,7 +6,7 @@ do
 	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
 	cd $BUILDDIR/$dir
 	if [ ! -f configured ]; then
-		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$prefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
+		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$toolsprefix $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
 		touch configured
 	fi
 	if [ ! -f built ]; then

dkppc/patches/gcc-6.2.0.patch

@@ -1,330 +0,0 @@
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/rs6000.h gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h
---- gcc-6.1.0/gcc/config/rs6000/rs6000.h	2016-01-20 20:30:24.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/rs6000.h	2016-05-20 12:10:24.645019640 +0100
-@@ -205,6 +205,7 @@
-   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
-   SUBTARGET_EXTRA_SPECS
- 
-+#if 0
- /* -mcpu=native handling only makes sense with compiler running on
-    an PowerPC chip.  If changing this condition, also change
-    the condition in driver-rs6000.c.  */
-@@ -219,6 +220,8 @@
- #else
- #define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- #endif
-+#endif
-+#define ASM_CPU_NATIVE_SPEC "%(asm_default)"
- 
- #ifndef CC1_CPU_SPEC
- #ifdef HAVE_LOCAL_CPU_DETECT
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.h gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h
---- gcc-6.1.0/gcc/config/rs6000/sysv4.h	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.h	2016-05-20 12:12:27.073019640 +0100
-@@ -559,7 +559,12 @@
- 
- /* Default starting address if specified.  */
- #define LINK_START_SPEC "\
--%{mads         : %(link_start_ads)         ; \
-+%{mgcn|mogc    : %(link_start_ogc)         ; \
-+  mvgc         : %(link_start_vgc)         ; \
-+  mgcbios      : %(link_start_gcb)         ; \
-+  mrvl         : %(link_start_rvl)         ; \
-+  mwup         : %(link_start_wup)         ; \
-+  mads         : %(link_start_ads)         ; \
-   myellowknife : %(link_start_yellowknife) ; \
-   mmvme        : %(link_start_mvme)        ; \
-   msim         : %(link_start_sim)         ; \
-@@ -590,7 +594,9 @@
- 
- /* Any specific OS flags.  */
- #define LINK_OS_SPEC "\
--%{mads         : %(link_os_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(link_os_ogc)         ; \
-+  mwup         : %(link_os_wup)         ; \
-+  mads         : %(link_os_ads)         ; \
-   myellowknife : %(link_os_yellowknife) ; \
-   mmvme        : %(link_os_mvme)        ; \
-   msim         : %(link_os_sim)         ; \
-@@ -608,7 +613,11 @@
- /* Override rs6000.h definition.  */
- #undef	CPP_SPEC
- #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
--%{mads         : %(cpp_os_ads)         ; \
-+%{mgcn         : %(cpp_os_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(cpp_os_ogc)         ; \
-+  mrvl         : %(cpp_os_rvl)         ; \
-+  mwup         : %(cpp_os_wup)         ; \
-+  mads         : %(cpp_os_ads)         ; \
-   myellowknife : %(cpp_os_yellowknife) ; \
-   mmvme        : %(cpp_os_mvme)        ; \
-   msim         : %(cpp_os_sim)         ; \
-@@ -622,7 +630,11 @@
- 
- #undef	STARTFILE_SPEC
- #define	STARTFILE_SPEC "\
--%{mads         : %(startfile_ads)         ; \
-+%{mgcn         : %(startfile_gcn)         ; \
-+  mogc|mvgc|mgcbios         : %(startfile_ogc)         ; \
-+  mrvl         : %(startfile_ogc)         ; \
-+  mwup         : %(startfile_wup)         ; \
-+  mads         : %(startfile_ads)         ; \
-   myellowknife : %(startfile_yellowknife) ; \
-   mmvme        : %(startfile_mvme)        ; \
-   msim         : %(startfile_sim)         ; \
-@@ -632,11 +643,13 @@
-   mcall-openbsd: %(startfile_openbsd)     ; \
-                : %(startfile_default)     }"
- 
--#define	STARTFILE_DEFAULT_SPEC "ecrti.o%s crtbegin.o%s"
-+#define	STARTFILE_DEFAULT_SPEC "crt0.o%s ecrti.o%s crtbegin.o%s"
- 
- #undef	LIB_SPEC
- #define	LIB_SPEC "\
--%{mads         : %(lib_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl        : %(lib_ogc)         ; \
-+  mwup         : %(lib_wup)         ; \
-+  mads         : %(lib_ads)         ; \
-   myellowknife : %(lib_yellowknife) ; \
-   mmvme        : %(lib_mvme)        ; \
-   msim         : %(lib_sim)         ; \
-@@ -646,11 +658,13 @@
-   mcall-openbsd: %(lib_openbsd)     ; \
-                : %(lib_default)     }"
- 
--#define LIB_DEFAULT_SPEC "-lc"
-+#define LIB_DEFAULT_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #undef	ENDFILE_SPEC
- #define	ENDFILE_SPEC "\
--%{mads         : %(endfile_ads)         ; \
-+%{mgcn|mogc|mvgc|mgcbios|mrvl         : %(endfile_ogc)         ; \
-+  mwup         : %(endfile_wup)         ; \
-+  mads         : %(endfile_ads)         ; \
-   myellowknife : %(endfile_yellowknife) ; \
-   mmvme        : %(endfile_mvme)        ; \
-   msim         : %(endfile_sim)         ; \
-@@ -666,16 +679,33 @@
- 
- /* Motorola ADS support.  */
- #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
-+#define LIB_OGC_SPEC "--start-group -lsysbase -lc --end-group"
-+#define LIB_WUP_SPEC "--start-group -lsysbase -lc --end-group"
- 
- #define	STARTFILE_ADS_SPEC "ecrti.o%s crt0.o%s crtbegin.o%s"
-+#define	STARTFILE_OGC_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
-+#define	STARTFILE_WUP_SPEC "ecrti.o%s crtbegin.o%s crtmain.o%s"
- 
- #define	ENDFILE_ADS_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_OGC_SPEC "crtend.o%s ecrtn.o%s"
-+#define	ENDFILE_WUP_SPEC "crtend.o%s ecrtn.o%s"
- 
- #define LINK_START_ADS_SPEC "-T ads.ld%s"
-+#define LINK_START_OGC_SPEC "-T ogc.ld%s"
-+#define LINK_START_RVL_SPEC "-T rvl.ld%s"
-+#define LINK_START_WUP_SPEC "-T wup.ld%s"
-+#define LINK_START_VGC_SPEC "-T vgcogc.ld%s"
-+#define LINK_START_GCB_SPEC "-T gcbogc.ld%s"
- 
- #define LINK_OS_ADS_SPEC ""
-+#define LINK_OS_OGC_SPEC "--gc-sections"
-+#define LINK_OS_WUP_SPEC "--gc-sections"
- 
- #define CPP_OS_ADS_SPEC ""
-+#define CPP_OS_GCN_SPEC "-D__gamecube__ -ffunction-sections -fdata-sections"
-+#define CPP_OS_OGC_SPEC "-D__gamecube__ -DHW_DOL -ffunction-sections -fdata-sections"
-+#define CPP_OS_RVL_SPEC "-D__wii__ -DHW_RVL -ffunction-sections -fdata-sections"
-+#define CPP_OS_WUP_SPEC "-D__wiiu__ -DHW_WUP -ffunction-sections -fdata-sections"
- 
- /* Motorola Yellowknife support.  */
- #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -855,6 +879,8 @@
- #undef	SUBTARGET_EXTRA_SPECS
- #define	SUBTARGET_EXTRA_SPECS						\
-   { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
-+  { "lib_ogc",			LIB_OGC_SPEC },				\
-+  { "lib_wup",			LIB_WUP_SPEC },	                        \
-   { "lib_ads",			LIB_ADS_SPEC },				\
-   { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
-   { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -864,6 +889,8 @@
-   { "lib_netbsd",		LIB_NETBSD_SPEC },			\
-   { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
-   { "lib_default",		LIB_DEFAULT_SPEC },			\
-+  { "startfile_ogc",		STARTFILE_OGC_SPEC },			\
-+  { "startfile_wup",		STARTFILE_WUP_SPEC },			\
-   { "startfile_ads",		STARTFILE_ADS_SPEC },			\
-   { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
-   { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -873,6 +899,8 @@
-   { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
-   { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
-   { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
-+  { "endfile_ogc",		ENDFILE_OGC_SPEC },			\
-+  { "endfile_wup",		ENDFILE_WUP_SPEC },			\
-   { "endfile_ads",		ENDFILE_ADS_SPEC },			\
-   { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
-   { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -884,7 +911,12 @@
-   { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
-   { "link_shlib",		LINK_SHLIB_SPEC },			\
-   { "link_start",		LINK_START_SPEC },			\
-+  { "link_start_vgc",		LINK_START_VGC_SPEC },			\
-+  { "link_start_gcb",		LINK_START_GCB_SPEC },			\
-+  { "link_start_rvl",		LINK_START_RVL_SPEC },			\
-+  { "link_start_wup",		LINK_START_WUP_SPEC },			\
-   { "link_start_ads",		LINK_START_ADS_SPEC },			\
-+  { "link_start_ogc",		LINK_START_OGC_SPEC },			\
-   { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
-   { "link_start_mvme",		LINK_START_MVME_SPEC },			\
-   { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -894,6 +925,8 @@
-   { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
-   { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
-   { "link_os",			LINK_OS_SPEC },				\
-+  { "link_os_ogc",		LINK_OS_OGC_SPEC },			\
-+  { "link_os_wup",		LINK_OS_WUP_SPEC },			\
-   { "link_os_ads",		LINK_OS_ADS_SPEC },			\
-   { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
-   { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -905,6 +937,10 @@
-   { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
-   { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
-   { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
-+  { "cpp_os_gcn",		CPP_OS_GCN_SPEC },			\
-+  { "cpp_os_ogc",		CPP_OS_OGC_SPEC },			\
-+  { "cpp_os_rvl",		CPP_OS_RVL_SPEC },			\
-+  { "cpp_os_wup",		CPP_OS_WUP_SPEC },			\
-   { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
-   { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
-   { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -NBaur gcc-6.1.0/gcc/config/rs6000/sysv4.opt gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-6.1.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/gcc/config/rs6000/sysv4.opt	2016-05-20 12:10:24.649019640 +0100
-@@ -120,6 +120,30 @@
- Target RejectNegative
- Link with libads.a, libc.a and crt0.o.
- 
-+mgcn
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mogc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use ogc linker script 
-+
-+mgcbios
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mvgc
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use gcbogc linker script 
-+
-+mrvl
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use rvl linker script 
-+
-+mwup
-+Target RejectNegative
-+Link with libsysbase.a and libc.a, use wup linker script 
-+
- myellowknife
- Target RejectNegative
- Link with libyk.a, libc.a and crt0.o.
-diff -NBaur gcc-6.1.0/gcc/config.gcc gcc-6.1.0-ppc/gcc/config.gcc
---- gcc-6.1.0/gcc/config.gcc	2016-04-11 11:14:59.000000000 +0100
-+++ gcc-6.1.0-ppc/gcc/config.gcc	2016-05-20 12:10:24.661019640 +0100
-@@ -2381,7 +2381,7 @@
- 	use_gcc_stdint=wrap
- 	;;
- powerpc-*-eabi*)
--	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
-+	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
- 	extra_options="${extra_options} rs6000/sysv4.opt"
- 	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- 	use_gcc_stdint=wrap
-diff -NBaur gcc-6.1.0/gcc/Makefile.in gcc-6.1.0-ppc/gcc/Makefile.in
---- gcc-6.1.0/gcc/Makefile.in	2016-04-15 12:49:39.000000000 +0100
-+++ gcc-6.1.0-ppc/gcc/Makefile.in	2016-05-20 12:10:24.641019640 +0100
-@@ -1073,8 +1073,8 @@
- # things like the go/%.o rule work properly; but we use $(*F) for the
- # file part, as we just want the file part of the stem, not the entire
- # file name.
--COMPILE = $(COMPILE.base) -MT $@ -MMD -MP -MF $(@D)/$(DEPDIR)/$(*F).TPo
--POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(*F).TPo $(@D)/$(DEPDIR)/$(*F).Po
-+COMPILE = $(COMPILE.base)
-+POSTCOMPILE =
- else
- COMPILE = source='$<' object='$@' libtool=no \
-     DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.1.0/libcpp/Makefile.in gcc-6.1.0-ppc/libcpp/Makefile.in
---- gcc-6.1.0/libcpp/Makefile.in	2016-04-27 09:22:11.000000000 +0100
-+++ gcc-6.1.0-ppc/libcpp/Makefile.in	2016-05-20 12:10:24.661019640 +0100
-@@ -208,8 +208,7 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--COMPILE = $(COMPILE.base) -o $@ -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Tpo
--POSTCOMPILE = @mv $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-+COMPILE = $(COMPILE.base) -o $@
- else
- COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
- 	  $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S
---- gcc-6.1.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtrestvr.S	2016-05-20 12:10:24.665019640 +0100
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S
---- gcc-6.1.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/config/rs6000/crtsavevr.S	2016-05-20 12:10:24.665019640 +0100
-@@ -24,7 +24,7 @@
- 
- /* On PowerPC64 Linux, these functions are provided by the linker.  */
- #ifndef __powerpc64__
--
-+#if 0
- #undef __ALTIVEC__
- #define __ALTIVEC__ 1
- 	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
- CFI_ENDPROC
- 
- #endif
-+#endif
-diff -NBaur gcc-6.1.0/libgcc/crtstuff.c gcc-6.1.0-ppc/libgcc/crtstuff.c
---- gcc-6.1.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
-+++ gcc-6.1.0-ppc/libgcc/crtstuff.c	2016-05-20 12:10:24.669019640 +0100
-@@ -47,6 +47,7 @@
- 
- /* Target machine header files require this define. */
- #define IN_LIBGCC2
-+#define USED_FOR_TARGET
- 
- /* FIXME: Including auto-host is incorrect, but until we have
-    identified the set of defines that need to go into auto-target.h,
-diff -NBaur gcc-6.1.0/libstdc++-v3/include/std/type_traits gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits
---- gcc-6.1.0/libstdc++-v3/include/std/type_traits	2016-01-12 21:19:58.000000000 +0000
-+++ gcc-6.1.0-ppc/libstdc++-v3/include/std/type_traits	2016-05-20 12:10:24.669019640 +0100
-@@ -38,7 +38,7 @@
- #include <bits/c++config.h>
- 
- #ifdef _GLIBCXX_USE_C99_STDINT_TR1
--# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__)
-+# if defined (__UINT_LEAST16_TYPE__) && defined(__UINT_LEAST32_TYPE__) && 0
- namespace std
- {
-   typedef __UINT_LEAST16_TYPE__ uint_least16_t;

dkppc/patches/gcc-8.1.0.patch

@@ -1,6 +1,6 @@
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/rs6000.h gcc-6.3.0-ppc/gcc/config/rs6000/rs6000.h
+diff -NBaur gcc-8.1.0/gcc/config/rs6000/rs6000.h gcc-8.1.0-ppc/gcc/config/rs6000/rs6000.h
---- gcc-6.3.0/gcc/config/rs6000/rs6000.h	2016-07-07 20:42:07.000000000 +0100
+--- gcc-8.1.0/gcc/config/rs6000/rs6000.h	2018-04-10 18:59:52.000000000 +0100
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/rs6000.h	2017-01-05 02:42:41.980000000 +0000
++++ gcc-8.1.0-ppc/gcc/config/rs6000/rs6000.h	2018-05-14 03:54:39.523821687 +0100
 @@ -205,6 +205,7 @@
    { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
    SUBTARGET_EXTRA_SPECS
@@ -18,10 +18,10 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/rs6000.h gcc-6.3.0-ppc/gcc/config/rs6000
  
  #ifndef CC1_CPU_SPEC
  #ifdef HAVE_LOCAL_CPU_DETECT
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.h
+diff -NBaur gcc-8.1.0/gcc/config/rs6000/sysv4.h gcc-8.1.0-ppc/gcc/config/rs6000/sysv4.h
---- gcc-6.3.0/gcc/config/rs6000/sysv4.h	2016-05-16 14:47:47.000000000 +0100
+--- gcc-8.1.0/gcc/config/rs6000/sysv4.h	2018-01-03 10:03:58.000000000 +0000
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.h	2017-01-05 02:46:27.020000000 +0000
++++ gcc-8.1.0-ppc/gcc/config/rs6000/sysv4.h	2018-05-14 03:54:39.539914747 +0100
-@@ -559,7 +559,12 @@
+@@ -565,7 +565,12 @@
  
  /* Default starting address if specified.  */
  #define LINK_START_SPEC "\
@@ -35,7 +35,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    myellowknife : %(link_start_yellowknife) ; \
    mmvme        : %(link_start_mvme)        ; \
    msim         : %(link_start_sim)         ; \
-@@ -590,7 +595,9 @@
+@@ -596,7 +601,9 @@
  
  /* Any specific OS flags.  */
  #define LINK_OS_SPEC "\
@@ -46,7 +46,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    myellowknife : %(link_os_yellowknife) ; \
    mmvme        : %(link_os_mvme)        ; \
    msim         : %(link_os_sim)         ; \
-@@ -608,7 +615,11 @@
+@@ -614,7 +621,11 @@
  /* Override rs6000.h definition.  */
  #undef	CPP_SPEC
  #define	CPP_SPEC "%{posix: -D_POSIX_SOURCE} \
@@ -59,7 +59,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    myellowknife : %(cpp_os_yellowknife) ; \
    mmvme        : %(cpp_os_mvme)        ; \
    msim         : %(cpp_os_sim)         ; \
-@@ -622,7 +633,11 @@
+@@ -628,7 +639,11 @@
  
  #undef	STARTFILE_SPEC
  #define	STARTFILE_SPEC "\
@@ -72,7 +72,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    myellowknife : %(startfile_yellowknife) ; \
    mmvme        : %(startfile_mvme)        ; \
    msim         : %(startfile_sim)         ; \
-@@ -636,7 +651,9 @@
+@@ -642,7 +657,9 @@
  
  #undef	LIB_SPEC
  #define	LIB_SPEC "\
@@ -83,7 +83,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    myellowknife : %(lib_yellowknife) ; \
    mmvme        : %(lib_mvme)        ; \
    msim         : %(lib_sim)         ; \
-@@ -646,11 +663,13 @@
+@@ -652,11 +669,13 @@
    mcall-openbsd: %(lib_openbsd)     ; \
                 : %(lib_default)     }"
  
@@ -99,7 +99,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    myellowknife : %(endfile_yellowknife) ; \
    mmvme        : %(endfile_mvme)        ; \
    msim         : %(endfile_sim)         ; \
-@@ -666,16 +685,33 @@
+@@ -672,16 +691,33 @@
  
  /* Motorola ADS support.  */
  #define LIB_ADS_SPEC "--start-group -lads -lc --end-group"
@@ -133,7 +133,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
  
  /* Motorola Yellowknife support.  */
  #define LIB_YELLOWKNIFE_SPEC "--start-group -lyk -lc --end-group"
-@@ -866,6 +902,8 @@
+@@ -882,6 +918,8 @@
  #undef	SUBTARGET_EXTRA_SPECS
  #define	SUBTARGET_EXTRA_SPECS						\
    { "crtsavres_default",	CRTSAVRES_DEFAULT_SPEC },		\
@@ -142,7 +142,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    { "lib_ads",			LIB_ADS_SPEC },				\
    { "lib_yellowknife",		LIB_YELLOWKNIFE_SPEC },			\
    { "lib_mvme",			LIB_MVME_SPEC },			\
-@@ -875,6 +913,8 @@
+@@ -891,6 +929,8 @@
    { "lib_netbsd",		LIB_NETBSD_SPEC },			\
    { "lib_openbsd",		LIB_OPENBSD_SPEC },			\
    { "lib_default",		LIB_DEFAULT_SPEC },			\
@@ -151,7 +151,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    { "startfile_ads",		STARTFILE_ADS_SPEC },			\
    { "startfile_yellowknife",	STARTFILE_YELLOWKNIFE_SPEC },		\
    { "startfile_mvme",		STARTFILE_MVME_SPEC },			\
-@@ -884,6 +924,8 @@
+@@ -900,6 +940,8 @@
    { "startfile_netbsd",		STARTFILE_NETBSD_SPEC },		\
    { "startfile_openbsd",	STARTFILE_OPENBSD_SPEC },		\
    { "startfile_default",	STARTFILE_DEFAULT_SPEC },		\
@@ -160,7 +160,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    { "endfile_ads",		ENDFILE_ADS_SPEC },			\
    { "endfile_yellowknife",	ENDFILE_YELLOWKNIFE_SPEC },		\
    { "endfile_mvme",		ENDFILE_MVME_SPEC },			\
-@@ -895,7 +937,12 @@
+@@ -911,7 +953,12 @@
    { "endfile_default",		ENDFILE_DEFAULT_SPEC },			\
    { "link_shlib",		LINK_SHLIB_SPEC },			\
    { "link_start",		LINK_START_SPEC },			\
@@ -173,7 +173,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    { "link_start_yellowknife",	LINK_START_YELLOWKNIFE_SPEC },		\
    { "link_start_mvme",		LINK_START_MVME_SPEC },			\
    { "link_start_sim",		LINK_START_SIM_SPEC },			\
-@@ -905,6 +952,8 @@
+@@ -921,6 +968,8 @@
    { "link_start_openbsd",	LINK_START_OPENBSD_SPEC },		\
    { "link_start_default",	LINK_START_DEFAULT_SPEC },		\
    { "link_os",			LINK_OS_SPEC },				\
@@ -182,7 +182,7 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    { "link_os_ads",		LINK_OS_ADS_SPEC },			\
    { "link_os_yellowknife",	LINK_OS_YELLOWKNIFE_SPEC },		\
    { "link_os_mvme",		LINK_OS_MVME_SPEC },			\
-@@ -916,6 +965,10 @@
+@@ -932,6 +981,10 @@
    { "link_os_default",		LINK_OS_DEFAULT_SPEC },			\
    { "cc1_secure_plt_default",	CC1_SECURE_PLT_DEFAULT_SPEC },		\
    { "link_secure_plt",		LINK_SECURE_PLT_SPEC },			\
@@ -193,10 +193,10 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.h gcc-6.3.0-ppc/gcc/config/rs6000/
    { "cpp_os_ads",		CPP_OS_ADS_SPEC },			\
    { "cpp_os_yellowknife",	CPP_OS_YELLOWKNIFE_SPEC },		\
    { "cpp_os_mvme",		CPP_OS_MVME_SPEC },			\
-diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.opt gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.opt
+diff -NBaur gcc-8.1.0/gcc/config/rs6000/sysv4.opt gcc-8.1.0-ppc/gcc/config/rs6000/sysv4.opt
---- gcc-6.3.0/gcc/config/rs6000/sysv4.opt	2016-01-04 14:30:50.000000000 +0000
+--- gcc-8.1.0/gcc/config/rs6000/sysv4.opt	2018-04-11 16:25:42.000000000 +0100
-+++ gcc-6.3.0-ppc/gcc/config/rs6000/sysv4.opt	2017-01-05 02:42:41.984000000 +0000
++++ gcc-8.1.0-ppc/gcc/config/rs6000/sysv4.opt	2018-05-14 03:54:39.539914747 +0100
-@@ -120,6 +120,30 @@
+@@ -124,6 +124,30 @@
  Target RejectNegative
  Link with libads.a, libc.a and crt0.o.
  
@@ -227,22 +227,22 @@ diff -NBaur gcc-6.3.0/gcc/config/rs6000/sysv4.opt gcc-6.3.0-ppc/gcc/config/rs600
  myellowknife
  Target RejectNegative
  Link with libyk.a, libc.a and crt0.o.
-diff -NBaur gcc-6.3.0/gcc/config.gcc gcc-6.3.0-ppc/gcc/config.gcc
+diff -NBaur gcc-8.1.0/gcc/config.gcc gcc-8.1.0-ppc/gcc/config.gcc
---- gcc-6.3.0/gcc/config.gcc	2016-11-07 21:38:43.000000000 +0000
+--- gcc-8.1.0/gcc/config.gcc	2018-04-27 20:31:35.000000000 +0100
-+++ gcc-6.3.0-ppc/gcc/config.gcc	2017-01-05 02:42:41.984000000 +0000
++++ gcc-8.1.0-ppc/gcc/config.gcc	2018-05-14 03:58:47.902895652 +0100
-@@ -2390,7 +2390,7 @@
+@@ -2459,7 +2459,7 @@
  	use_gcc_stdint=wrap
  	;;
  powerpc-*-eabi*)
--	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
+-	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
-+	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/750cl.h"
++	tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/750cl.h"
  	extra_options="${extra_options} rs6000/sysv4.opt"
  	tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
  	use_gcc_stdint=wrap
-diff -NBaur gcc-6.3.0/gcc/Makefile.in gcc-6.3.0-ppc/gcc/Makefile.in
+diff -NBaur gcc-8.1.0/gcc/Makefile.in gcc-8.1.0-ppc/gcc/Makefile.in
---- gcc-6.3.0/gcc/Makefile.in	2016-11-22 17:33:07.000000000 +0000
+--- gcc-8.1.0/gcc/Makefile.in	2018-03-09 15:24:44.000000000 +0000
-+++ gcc-6.3.0-ppc/gcc/Makefile.in	2017-01-05 02:42:41.988000000 +0000
++++ gcc-8.1.0-ppc/gcc/Makefile.in	2018-05-14 03:54:39.539914747 +0100
-@@ -1073,8 +1073,8 @@
+@@ -1098,8 +1098,8 @@
  # things like the go/%.o rule work properly; but we use $(*F) for the
  # file part, as we just want the file part of the stem, not the entire
  # file name.
@@ -253,9 +253,9 @@ diff -NBaur gcc-6.3.0/gcc/Makefile.in gcc-6.3.0-ppc/gcc/Makefile.in
  else
  COMPILE = source='$<' object='$@' libtool=no \
      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.3.0/libcpp/Makefile.in gcc-6.3.0-ppc/libcpp/Makefile.in
+diff -NBaur gcc-8.1.0/libcpp/Makefile.in gcc-8.1.0-ppc/libcpp/Makefile.in
---- gcc-6.3.0/libcpp/Makefile.in	2016-12-21 07:53:39.000000000 +0000
+--- gcc-8.1.0/libcpp/Makefile.in	2018-05-02 09:19:58.000000000 +0100
-+++ gcc-6.3.0-ppc/libcpp/Makefile.in	2017-01-05 02:42:41.988000000 +0000
++++ gcc-8.1.0-ppc/libcpp/Makefile.in	2018-05-14 03:54:39.543938012 +0100
 @@ -208,8 +208,7 @@
  # Note that we put the dependencies into a .Tpo file, then move them
  # into place if the compile succeeds.  We need this because gcc does
@@ -266,9 +266,9 @@ diff -NBaur gcc-6.3.0/libcpp/Makefile.in gcc-6.3.0-ppc/libcpp/Makefile.in
  else
  COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
  	  $(depcomp) $(COMPILE.base)
-diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S gcc-6.3.0-ppc/libgcc/config/rs6000/crtrestvr.S
+diff -NBaur gcc-8.1.0/libgcc/config/rs6000/crtrestvr.S gcc-8.1.0-ppc/libgcc/config/rs6000/crtrestvr.S
---- gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S	2016-01-04 14:30:50.000000000 +0000
+--- gcc-8.1.0/libgcc/config/rs6000/crtrestvr.S	2018-01-03 10:03:58.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/config/rs6000/crtrestvr.S	2017-01-05 02:42:41.988000000 +0000
++++ gcc-8.1.0-ppc/libgcc/config/rs6000/crtrestvr.S	2018-05-14 03:54:39.543938012 +0100
 @@ -24,7 +24,7 @@
  
  /* On PowerPC64 Linux, these functions are provided by the linker.  */
@@ -278,14 +278,14 @@ diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtrestvr.S gcc-6.3.0-ppc/libgcc/conf
  #undef __ALTIVEC__
  #define __ALTIVEC__ 1
  	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
+@@ -86,3 +86,4 @@
  CFI_ENDPROC
  
  #endif
 +#endif
-diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S gcc-6.3.0-ppc/libgcc/config/rs6000/crtsavevr.S
+diff -NBaur gcc-8.1.0/libgcc/config/rs6000/crtsavevr.S gcc-8.1.0-ppc/libgcc/config/rs6000/crtsavevr.S
---- gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S	2016-01-04 14:30:50.000000000 +0000
+--- gcc-8.1.0/libgcc/config/rs6000/crtsavevr.S	2018-01-03 10:03:58.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/config/rs6000/crtsavevr.S	2017-01-05 02:42:41.988000000 +0000
++++ gcc-8.1.0-ppc/libgcc/config/rs6000/crtsavevr.S	2018-05-14 03:54:39.543938012 +0100
 @@ -24,7 +24,7 @@
  
  /* On PowerPC64 Linux, these functions are provided by the linker.  */
@@ -295,14 +295,14 @@ diff -NBaur gcc-6.3.0/libgcc/config/rs6000/crtsavevr.S gcc-6.3.0-ppc/libgcc/conf
  #undef __ALTIVEC__
  #define __ALTIVEC__ 1
  	#include "ppc-asm.h"
-@@ -85,3 +85,4 @@
+@@ -86,3 +86,4 @@
  CFI_ENDPROC
  
  #endif
 +#endif
-diff -NBaur gcc-6.3.0/libgcc/crtstuff.c gcc-6.3.0-ppc/libgcc/crtstuff.c
+diff -NBaur gcc-8.1.0/libgcc/crtstuff.c gcc-8.1.0-ppc/libgcc/crtstuff.c
---- gcc-6.3.0/libgcc/crtstuff.c	2016-01-04 14:30:50.000000000 +0000
+--- gcc-8.1.0/libgcc/crtstuff.c	2018-01-03 10:03:58.000000000 +0000
-+++ gcc-6.3.0-ppc/libgcc/crtstuff.c	2017-01-05 02:42:41.988000000 +0000
++++ gcc-8.1.0-ppc/libgcc/crtstuff.c	2018-05-14 03:54:39.543938012 +0100
 @@ -47,6 +47,7 @@
  
  /* Target machine header files require this define. */

dkppc/patches/gdb-7.11.patch

@@ -1,18 +0,0 @@
-diff -NBaur gdb-7.10/gdb/Makefile.in gdb-7.10-ppc/gdb/Makefile.in
---- gdb-7.10/gdb/Makefile.in	2015-08-28 22:22:07.000000000 +0100
-+++ gdb-7.10-ppc/gdb/Makefile.in	2015-11-09 09:21:13.228003995 +0000
-@@ -2676,10 +2676,10 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+#@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+#@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+#@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+#@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)

dkppc/patches/newlib-2.5.0.patch

@@ -624,7 +624,7 @@ index 0000000..b6cdfae
 +m4_include([../acinclude.m4])
 diff --git a/libgloss/libsysbase/build_argv.c b/libgloss/libsysbase/build_argv.c
 new file mode 100644
-index 0000000..79d2006
+index 0000000..3ca95d5
 --- /dev/null
 +++ b/libgloss/libsysbase/build_argv.c
 @@ -0,0 +1,31 @@
@@ -646,13 +646,13 @@ index 0000000..79d2006
 +	char** argv = (char**)(((int)data + len + sizeof(char **)) & ~(sizeof(char **)-1));
 +	char* end = data + len - 1;
 +	int argCount = 0;
-+	
++
 +	do {
 +		argv[argCount++] = data;			// Add next arg to argv list
 +		while (*(data) && data < end) data++;		// Move to next NULL delimiter
 +		data++;						// Move to one after the NULL delimiter
 +	} while (data < end);
-+	
++
 +	*end = '\0';						// Force NULL terminator for last arg
 +
 +	argstruct->argv = argv;
@@ -661,7 +661,7 @@ index 0000000..79d2006
 +}
 diff --git a/libgloss/libsysbase/chdir.c b/libgloss/libsysbase/chdir.c
 new file mode 100644
-index 0000000..2a0fa03
+index 0000000..90d2dc5
 --- /dev/null
 +++ b/libgloss/libsysbase/chdir.c
 @@ -0,0 +1,201 @@
@@ -716,7 +716,7 @@ index 0000000..2a0fa03
 +		}
 +
 +		/* Grab the next directory name from extra */
-+		extraEnd = strchr (extra, DIRECTORY_SEPARATOR_CHAR); 
++		extraEnd = strchr (extra, DIRECTORY_SEPARATOR_CHAR);
 +		if (extraEnd == NULL) {
 +			extraEnd = strrchr (extra, '\0');
 +		} else {
@@ -728,12 +728,12 @@ index 0000000..2a0fa03
 +			break;
 +		}
 +
-+		if ((strncmp (extra, DIRECTORY_THIS, sizeof(DIRECTORY_THIS) - 1) == 0) 
++		if ((strncmp (extra, DIRECTORY_THIS, sizeof(DIRECTORY_THIS) - 1) == 0)
 +			&& ((extra[sizeof(DIRECTORY_THIS)-1] == DIRECTORY_SEPARATOR_CHAR)
 +				||(extra[sizeof(DIRECTORY_THIS)-1] == '\0')))
 +		{
 +			/* Don't copy anything */
-+		} else 	if ((strncmp (extra, DIRECTORY_PARENT, sizeof(DIRECTORY_PARENT) - 1) == 0) 
++		} else 	if ((strncmp (extra, DIRECTORY_PARENT, sizeof(DIRECTORY_PARENT) - 1) == 0)
 +			&& ((extra[sizeof(DIRECTORY_PARENT)-1] == DIRECTORY_SEPARATOR_CHAR)
 +				||(extra[sizeof(DIRECTORY_PARENT)-1] == '\0')))
 +		{
@@ -868,7 +868,7 @@ index 0000000..2a0fa03
 +}
 diff --git a/libgloss/libsysbase/chmod.c b/libgloss/libsysbase/chmod.c
 new file mode 100644
-index 0000000..ce79a2c
+index 0000000..3668b58
 --- /dev/null
 +++ b/libgloss/libsysbase/chmod.c
 @@ -0,0 +1,30 @@
@@ -886,7 +886,7 @@ index 0000000..ce79a2c
 +
 +	/* Get device from path name */
 +	dev = FindDevice(path);
-+	
++
 +	if (dev < 0) {
 +		r->_errno = ENODEV;
 +		ret = -1;
@@ -904,7 +904,7 @@ index 0000000..ce79a2c
 +
 diff --git a/libgloss/libsysbase/close.c b/libgloss/libsysbase/close.c
 new file mode 100644
-index 0000000..d3563fb
+index 0000000..a251e5b
 --- /dev/null
 +++ b/libgloss/libsysbase/close.c
 @@ -0,0 +1,49 @@
@@ -940,7 +940,7 @@ index 0000000..d3563fb
 +			dev = handle->device;
 +			handle->refcount--;
 +			if (handle->refcount == 0 ) {
-+				
++
 +				if(devoptab_list[dev]->close_r) {
 +					ptr->deviceData = devoptab_list[dev]->deviceData;
 +					ret = devoptab_list[dev]->close_r(ptr,handle->fileStruct);
@@ -989,7 +989,7 @@ index 0000000..48ce950
 +/* symbol prefix */
 +#undef __SYMBOL_PREFIX
 diff --git a/libgloss/libsysbase/configure b/libgloss/libsysbase/configure
-new file mode 100755
+new file mode 100644
 index 0000000..874eec1
 --- /dev/null
 +++ b/libgloss/libsysbase/configure
@@ -5154,7 +5154,7 @@ index 0000000..874eec1
 +
 diff --git a/libgloss/libsysbase/configure.in b/libgloss/libsysbase/configure.in
 new file mode 100644
-index 0000000..c127df0
+index 0000000..f3b8380
 --- /dev/null
 +++ b/libgloss/libsysbase/configure.in
 @@ -0,0 +1,199 @@
@@ -5214,9 +5214,9 @@ index 0000000..c127df0
 +  d10v*)
 +	;;
 +  h8300*-*-*)
-+	;;	
++	;;
 +  h8500-*-*)
-+	;;	
++	;;
 +  i[3456]86-*-sco*)
 +	;;
 +  lm32-*-*)
@@ -5239,7 +5239,7 @@ index 0000000..c127df0
 +  v850*-*-*)
 +	;;
 +  w65-*-*)
-+	;;	
++	;;
 +  xstormy16-*-*)
 +	;;
 +  z8k-*-*)
@@ -5734,7 +5734,7 @@ index 0000000..c6b8c92
 +}
 diff --git a/libgloss/libsysbase/fork.c b/libgloss/libsysbase/fork.c
 new file mode 100644
-index 0000000..712b13e
+index 0000000..3aa75a3
 --- /dev/null
 +++ b/libgloss/libsysbase/fork.c
 @@ -0,0 +1,25 @@
@@ -5753,7 +5753,7 @@ index 0000000..712b13e
 +	   struct _reent * r) {
 +//---------------------------------------------------------------------------------
 +#else
-+//---------------------------------------------------------------------------------	
++//---------------------------------------------------------------------------------
 +int
 +_DEFUN (_fork, (),
 +        _NOARGS) {
@@ -6470,7 +6470,7 @@ index 0000000..4565909
 +char *fake_heap_start = (char*)0;
 diff --git a/libgloss/libsysbase/mkdir.c b/libgloss/libsysbase/mkdir.c
 new file mode 100644
-index 0000000..4175cf8
+index 0000000..b4fcbd3
 --- /dev/null
 +++ b/libgloss/libsysbase/mkdir.c
 @@ -0,0 +1,19 @@
@@ -6490,7 +6490,7 @@ index 0000000..4175cf8
 +	} else {
 +		r->_errno = ENOSYS;
 +	}
-+	
++
 +	return ret;
 +}
 diff --git a/libgloss/libsysbase/open.c b/libgloss/libsysbase/open.c
@@ -6613,7 +6613,7 @@ index 0000000..7f3f7f2
 +
 diff --git a/libgloss/libsysbase/rename.c b/libgloss/libsysbase/rename.c
 new file mode 100644
-index 0000000..7520d1d
+index 0000000..f8a0aa9
 --- /dev/null
 +++ b/libgloss/libsysbase/rename.c
 @@ -0,0 +1,41 @@
@@ -6655,7 +6655,7 @@ index 0000000..7520d1d
 +	} else {
 +		r->_errno = EXDEV;
 +	}
-+	
++
 +	return ret;
 +}
 diff --git a/libgloss/libsysbase/rmdir.c b/libgloss/libsysbase/rmdir.c
@@ -6774,7 +6774,7 @@ index 0000000..e474c47
 +
 diff --git a/libgloss/libsysbase/statvfs.c b/libgloss/libsysbase/statvfs.c
 new file mode 100644
-index 0000000..b3dec22
+index 0000000..84e2213
 --- /dev/null
 +++ b/libgloss/libsysbase/statvfs.c
 @@ -0,0 +1,24 @@
@@ -6799,12 +6799,12 @@ index 0000000..b3dec22
 +	} else {
 +		r->_errno = ENOSYS;
 +	}
-+	
++
 +	return ret;
 +}
 diff --git a/libgloss/libsysbase/syscall_support.c b/libgloss/libsysbase/syscall_support.c
 new file mode 100644
-index 0000000..70d717a
+index 0000000..939ec25
 --- /dev/null
 +++ b/libgloss/libsysbase/syscall_support.c
 @@ -0,0 +1,63 @@
@@ -6824,7 +6824,7 @@ index 0000000..70d717a
 +	NULL	// gettod_r
 +};
 +
-+int __libc_lock_init(int *lock,int recursive) { 
++int __libc_lock_init(int *lock,int recursive) {
 +
 +	if ( __syscalls.lock_init ) {
 +		return __syscalls.lock_init(lock, recursive);
@@ -6856,7 +6856,7 @@ index 0000000..70d717a
 +	if ( __syscalls.lock_acquire) {
 +		return __syscalls.lock_acquire(lock);
 +	}
-+	
++
 +	return 0;
 +}
 +
@@ -6873,7 +6873,7 @@ index 0000000..70d717a
 +}
 diff --git a/libgloss/libsysbase/times.c b/libgloss/libsysbase/times.c
 new file mode 100644
-index 0000000..67db6c7
+index 0000000..45e9781
 --- /dev/null
 +++ b/libgloss/libsysbase/times.c
 @@ -0,0 +1,21 @@
@@ -6890,7 +6890,7 @@ index 0000000..67db6c7
 +	struct tms *ptms) {
 +#else
 +clock_t _DEFUN (_times, (buf),
-+		struct tms *buf) { 
++		struct tms *buf) {
 +
 +	struct _reent *r = _REENT;
 +#endif
@@ -7007,7 +7007,7 @@ index 0000000..9a61639
 +
 diff --git a/libgloss/libsysbase/wait.c b/libgloss/libsysbase/wait.c
 new file mode 100644
-index 0000000..322c847
+index 0000000..f64bf13
 --- /dev/null
 +++ b/libgloss/libsysbase/wait.c
 @@ -0,0 +1,29 @@
@@ -7020,22 +7020,22 @@ index 0000000..322c847
 +#include <_syslist.h>
 +#include <errno.h>
 +
-+//---------------------------------------------------------------------------------	
++//---------------------------------------------------------------------------------
 +#ifdef REENTRANT_SYSCALLS_PROVIDED
-+//---------------------------------------------------------------------------------	
++//---------------------------------------------------------------------------------
 +int
 +_DEFUN (_wait_r, (r, status),
 +		struct _reent *r _AND
 +		int  *status) {
 +
 +#else
-+//---------------------------------------------------------------------------------	
++//---------------------------------------------------------------------------------
 +int
 +_DEFUN (_wait, (status),
 +	int  *status) {
 +	struct _reent *r = _REENT;
 +#endif
-+//---------------------------------------------------------------------------------	
++//---------------------------------------------------------------------------------
 +	r->_errno = ENOSYS;
 +	return -1;
 +}
@@ -7622,6 +7622,93 @@ index 8572821..57dee54 100644
  {
    return __get_current_locale ()->ctype_ptr;
  }
+diff --git a/newlib/libc/machine/powerpc/Makefile.am b/newlib/libc/machine/powerpc/Makefile.am
+index e86afdf..007bd15 100644
+--- a/newlib/libc/machine/powerpc/Makefile.am
++++ b/newlib/libc/machine/powerpc/Makefile.am
+@@ -10,7 +10,7 @@ noinst_LIBRARIES = lib.a
+ 
+ AM_CFLAGS = -I $(srcdir)/../../stdio -I $(srcdir)/../../stdlib
+ 
+-lib_a_SOURCES = setjmp.S
++lib_a_SOURCES = setjmp.S access.c
+ lib_a_CCASFLAGS=$(AM_CCASFLAGS)
+ lib_a_CFLAGS=$(AM_CFLAGS)
+ lib_a_LIBADD = @extra_objs@
+diff --git a/newlib/libc/machine/powerpc/Makefile.in b/newlib/libc/machine/powerpc/Makefile.in
+index 73b0cc4..12044cb 100644
+--- a/newlib/libc/machine/powerpc/Makefile.in
++++ b/newlib/libc/machine/powerpc/Makefile.in
+@@ -68,7 +68,7 @@ CONFIG_CLEAN_VPATH_FILES =
+ LIBRARIES = $(noinst_LIBRARIES)
+ ARFLAGS = cru
+ lib_a_AR = $(AR) $(ARFLAGS)
+-am_lib_a_OBJECTS = lib_a-setjmp.$(OBJEXT)
++am_lib_a_OBJECTS = lib_a-setjmp.$(OBJEXT) lib_a-access.$(OBJEXT)
+ lib_a_OBJECTS = $(am_lib_a_OBJECTS)
+ DEFAULT_INCLUDES = -I.@am__isrc@
+ depcomp =
+@@ -196,7 +196,7 @@ INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+ AM_CCASFLAGS = $(INCLUDES)
+ noinst_LIBRARIES = lib.a
+ AM_CFLAGS = -I $(srcdir)/../../stdio -I $(srcdir)/../../stdlib
+-lib_a_SOURCES = setjmp.S
++lib_a_SOURCES = setjmp.S access.c
+ lib_a_CCASFLAGS = $(AM_CCASFLAGS)
+ lib_a_CFLAGS = $(AM_CFLAGS)
+ lib_a_LIBADD = @extra_objs@
+@@ -280,6 +280,12 @@ lib_a-setjmp.obj: setjmp.S
+ .c.obj:
+ 	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+ 
++lib_a-access.o: access.c
++	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-access.o `test -f 'access.c' || echo '$(srcdir)/'`access.c
++
++lib_a-access.obj: access.c
++	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-access.obj `if test -f 'access.c'; then $(CYGPATH_W) 'access.c'; else $(CYGPATH_W) '$(srcdir)/access.c'; fi`
++
+ lib_a-vfprintf.o: vfprintf.c
+ 	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CFLAGS) $(CFLAGS) -c -o lib_a-vfprintf.o `test -f 'vfprintf.c' || echo '$(srcdir)/'`vfprintf.c
+ 
+diff --git a/newlib/libc/machine/powerpc/access.c b/newlib/libc/machine/powerpc/access.c
+new file mode 100644
+index 0000000..980682e
+--- /dev/null
++++ b/newlib/libc/machine/powerpc/access.c
+@@ -0,0 +1,33 @@
++/* This is file ACCESS.C */
++/*
++ * Copyright (C) 1993 DJ Delorie
++ * All rights reserved.
++ *
++ * Redistribution, modification, and use in source and binary forms is permitted
++ * provided that the above copyright notice and following paragraph are
++ * duplicated in all such forms.
++ *
++ * This file is distributed WITHOUT ANY WARRANTY; without even the implied
++ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
++ */
++
++#include <fcntl.h>
++#include <sys/stat.h>
++#include <unistd.h>
++
++int access(const char *fn, int flags)
++{
++  struct stat s;
++  if (stat(fn, &s))
++    return -1;
++  if (s.st_mode & S_IFDIR)
++    return 0;
++  if (flags & W_OK)
++  {
++    if (s.st_mode & S_IWRITE)
++      return 0;
++    return -1;
++  }
++  return 0;
++}
++	
 diff --git a/newlib/libc/machine/powerpc/machine/_types.h b/newlib/libc/machine/powerpc/machine/_types.h
 new file mode 100644
 index 0000000..a7d63da

dkppc/rules/base_rules

@@ -1,38 +1,4 @@
-#---------------------------------------------------------------------------------
+include $(DEVKITPPC)/base_tools
-# change shell on Snow Leopard
-#---------------------------------------------------------------------------------
-UNAME_S	:=	$(shell uname -s)
-UNAME_R	:=	$(shell uname -r)
-
-ifneq (,$(findstring Darwin,$(UNAME_S)))
-	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
-		export SHELL=/bin/bash
-	endif
-endif
-
-#---------------------------------------------------------------------------------
-# path to tools 
-#---------------------------------------------------------------------------------
-export PORTLIBS	:=	$(DEVKITPRO)/portlibs/ppc
-export PATH	:=	$(DEVKITPPC)/bin:$(PORTLIBS)/bin:$(PATH)
-
-#---------------------------------------------------------------------------------
-# the prefix on the compiler executables
-#---------------------------------------------------------------------------------
-PREFIX	:=	powerpc-eabi-
-
-export AS	:=	$(PREFIX)as
-export CC	:=	$(PREFIX)gcc
-export CXX	:=	$(PREFIX)g++
-export AR	:=	$(PREFIX)ar
-export OBJCOPY	:=	$(PREFIX)objcopy
-
-
-ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
-
-ifneq (,$(ISVC))
-	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
-endif
 
 #---------------------------------------------------------------------------------
 %.a:
@@ -45,7 +11,7 @@ endif
 %.o: %.cpp
 	@echo $(notdir $<)
 	@$(CXX) -MMD -MP -MF $(DEPSDIR)/$*.d $(CXXFLAGS) -c $< -o $@ $(ERROR_FILTER)
-	
+
 #---------------------------------------------------------------------------------
 %.o: %.c
 	@echo $(notdir $<)

dkppc/rules/base_tools

@@ -0,0 +1,37 @@
+#---------------------------------------------------------------------------------
+# change shell on Snow Leopard
+#---------------------------------------------------------------------------------
+UNAME_S	:=	$(shell uname -s)
+UNAME_R	:=	$(shell uname -r)
+
+ifneq (,$(findstring Darwin,$(UNAME_S)))
+	ifneq (,$(findstring 10.8.0,$(UNAME_R)))
+		export SHELL=/bin/bash
+	endif
+endif
+
+#---------------------------------------------------------------------------------
+# path to tools
+#---------------------------------------------------------------------------------
+DEVKITPATH=$(shell echo "$(DEVKITPRO)" | sed -e 's/^\([a-zA-Z]\):/\/\1/')
+
+export PORTLIBS	:=	$(DEVKITPATH)/portlibs/ppc
+export PATH	:=	$(DEVKITPATH)/tools/bin:$(DEVKITPATH)/devkitPPC/bin:$(PORTLIBS)/bin:$(PATH)
+
+#---------------------------------------------------------------------------------
+# the prefix on the compiler executables
+#---------------------------------------------------------------------------------
+PREFIX	:=	powerpc-eabi-
+
+export AS	:=	$(PREFIX)as
+export CC	:=	$(PREFIX)gcc
+export CXX	:=	$(PREFIX)g++
+export AR	:=	$(PREFIX)ar
+export OBJCOPY	:=	$(PREFIX)objcopy
+
+
+ISVC=$(or $(VCBUILDHELPER_COMMAND),$(MSBUILDEXTENSIONSPATH32),$(MSBUILDEXTENSIONSPATH))
+
+ifneq (,$(ISVC))
+	ERROR_FILTER	:=	2>&1 | sed -e 's/\(.[a-zA-Z]\+\):\([0-9]\+\):/\1(\2):/g'
+endif

dkppc/scripts/build-crtls.sh

@@ -1,32 +0,0 @@
-#!/bin/bash
-
-export DEVKITPPC=$TOOLPATH/devkitPPC
-export DEVKITPRO=$TOOLPATH
-
-#---------------------------------------------------------------------------------
-# Install and build the gamecube crt and libogc
-#---------------------------------------------------------------------------------
-
-echo "installing linkscripts ..."
-cp $BUILDSCRIPTDIR/dkppc/crtls/*.ld $prefix/$target/lib/
-#---------------------------------------------------------------------------------
-# copy base rulesets
-#---------------------------------------------------------------------------------
-cp $BUILDSCRIPTDIR/dkppc/rules/* $prefix
-
-cd $BUILDDIR/libogc-$LIBOGC_VER
-
-if [ ! -f installed ]; then
-	echo "Building & installing libogc"
-	$MAKE install || { echo "libogc install failed"; exit 1; }
-	touch installed
-fi
-
-cd $BUILDDIR/libfat-$LIBFAT_VER
-
-if [ ! -f installed ]; then
-	echo "Building & installing libfat"
-	$MAKE ogc-install || { echo "libfat install failed"; exit 1; }
-	touch installed
-fi
-

dkppc/scripts/build-gcc.sh

@@ -95,8 +95,10 @@ then
 	--with-headers=../../newlib-$NEWLIB_VER/newlib/libc/include \
 	--prefix=$prefix\
 	--with-system-zlib\
-	--with-bugurl="http://wiki.devkitpro.org/index.php/Bug_Reports" --with-pkgversion="devkitPPC release 29-1" \
+	--with-bugurl="https://github.com/devkitpro/buildscripts/issues" --with-pkgversion="devkitPPC release 30" \
 	$CROSS_PARAMS \
+	$CROSS_GCC_PARAMS \
+        CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
 	|| { echo "Error configuring gcc stage 1"; exit 1; }
 	touch configured-gcc
 fi
@@ -123,6 +125,11 @@ cd $target/newlib
 unset CFLAGS
 unset LDFLAGS
 
+OLD_CC=$CC
+OLD_CXX=$CXX
+unset CC
+unset CXX
+
 if [ ! -f configured-newlib ]
 then
 	CFLAGS_FOR_TARGET="-O2 -ffunction-sections -fdata-sections" \
@@ -146,6 +153,9 @@ then
 	touch installed-newlib
 fi
 
+export CC=$OLD_CC
+export CXX=$OLD_CXX
+
 #---------------------------------------------------------------------------------
 # build and install the final compiler
 #---------------------------------------------------------------------------------
@@ -168,6 +178,17 @@ fi
 
 rm -fr $prefix/$target/sys-include
 
+#---------------------------------------------------------------------------------
+# Install and build the gamecube crt and libogc
+#---------------------------------------------------------------------------------
+
+echo "installing linkscripts ..."
+cp $BUILDSCRIPTDIR/dkppc/crtls/*.ld $prefix/$target/lib/
+#---------------------------------------------------------------------------------
+# copy base rulesets
+#---------------------------------------------------------------------------------
+cp $BUILDSCRIPTDIR/dkppc/rules/* $prefix
+
 cd $BUILDDIR
 
 #---------------------------------------------------------------------------------

dkppc/scripts/build-libs.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+export DEVKITPPC=$TOOLPATH/devkitPPC
+export DEVKITPRO=$TOOLPATH
+
+cd $BUILDDIR/libogc-$LIBOGC_VER
+
+if [ ! -f installed ]; then
+	echo "Building & installing libogc"
+	$MAKE install || { echo "libogc install failed"; exit 1; }
+	touch installed
+fi
+
+cd $BUILDDIR/libfat-$LIBFAT_VER
+
+if [ ! -f installed ]; then
+	echo "Building & installing libfat"
+	$MAKE ogc-install || { echo "libfat install failed"; exit 1; }
+	touch installed
+fi
+

dkppc/scripts/build-tools.sh

@@ -6,7 +6,7 @@ do
 	dir=$(echo $archive | sed -e 's/\(.*\)\.tar\.bz2/\1/' )
 	cd $BUILDDIR/$dir
 	if [ ! -f configured ]; then
-		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$prefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
+		CXXFLAGS=$cflags CFLAGS=$cflags LDFLAGS=$ldflags ./configure --prefix=$toolsprefix --disable-dependency-tracking $CROSS_PARAMS || { echo "error configuring $archive"; exit 1; }
 		touch configured
 	fi
 	if [ ! -f built ]; then

makedist.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 DATESTRING=$(date +%Y)$(date +%m)$(date +%d)
 cd .. && tar	--exclude=*CVS* --exclude=.svn --exclude=.git --exclude=*.log --exclude=*.bz2 \
-				--exclude=*.gz --exclude=config.sh --exclude=.devkitARM --exclude=.devkitPPC \
+				--exclude=*.gz --exclude=config.sh --exclude=.devkitARM* --exclude=.devkitPPC* \
-				--exclude=.devkitPSP --exclude=.gitignore \
+				--exclude=.devkitA64* --exclude=.gitignore \
 				-cvjf buildscripts-$DATESTRING.tar.bz2 buildscripts

select_toolchain.sh

@@ -19,6 +19,7 @@ do
   echo
   echo "1: devkitARM (gba gp32 ds)"
   echo "2: devkitPPC (gamecube wii)"
+  echo "3: devkitA64 (switch)"
   read VERSION
 
   if [ "$VERSION" -ne 1 -a "$VERSION" -ne 2 -a "$VERSION" -ne 3 ]
@@ -29,24 +30,34 @@ done
 
 case "$VERSION" in
   "1" )
-    GCC_VER=6.3.0
+    GCC_VER=8.1.0
-    BINUTILS_VER=2.27
+    BINUTILS_VER=2.30
-    NEWLIB_VER=2.5.0
+    NEWLIB_VER=3.0.0
-    GDB_VER=7.12
+    GDB_VER=8.0
     basedir='dkarm-eabi'
     package=devkitARM
     target=arm-none-eabi
     toolchain=DEVKITARM
   ;;
   "2" )
-    GCC_VER=6.3.0
+    GCC_VER=8.1.0
-    BINUTILS_VER=2.27
+    BINUTILS_VER=2.28
     MN_BINUTILS_VER=2.17
     NEWLIB_VER=2.5.0
-    GDB_VER=7.11
+    GDB_VER=8.0.1
     basedir='dkppc'
     package=devkitPPC
     target=powerpc-eabi
     toolchain=DEVKITPPC
   ;;
+  "3" )
+    GCC_VER=8.1.0
+    BINUTILS_VER=2.30
+    NEWLIB_VER=3.0.0
+    GDB_VER=8.0
+    basedir='dka64'
+    package=devkitA64
+    target=aarch64-none-elf
+    toolchain=DEVKITA64
+  ;;
 esac