From ae0148294220bb4a8ac51405d8a711742b228158 Mon Sep 17 00:00:00 2001 From: Dave Murphy Date: Sat, 24 May 2014 00:00:32 +0100 Subject: [PATCH] upgrade gdb to 7.7.1 --- dkarm-eabi/patches/gdb-7.7.1.patch | 32 + dkarm-eabi/patches/gdb-7.7.patch | 3004 ---------------------------- select_toolchain.sh | 2 +- 3 files changed, 33 insertions(+), 3005 deletions(-) create mode 100644 dkarm-eabi/patches/gdb-7.7.1.patch delete mode 100644 dkarm-eabi/patches/gdb-7.7.patch diff --git a/dkarm-eabi/patches/gdb-7.7.1.patch b/dkarm-eabi/patches/gdb-7.7.1.patch new file mode 100644 index 0000000..06ea8f1 --- /dev/null +++ b/dkarm-eabi/patches/gdb-7.7.1.patch @@ -0,0 +1,32 @@ +diff -Nbaur gdb-7.7.1/gdb/Makefile.in gdb-7.7.1-arm/gdb/Makefile.in +--- gdb-7.7.1/gdb/Makefile.in 2014-05-05 22:51:24.000000000 +0100 ++++ gdb-7.7.1-arm/gdb/Makefile.in 2014-05-18 17:05:16.105567001 +0100 +@@ -2307,10 +2307,8 @@ + # Note that we put the dependencies into a .Tpo file, then move them + # into place if the compile succeeds. We need this because gcc does + # not atomically write the dependency output file. +-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \ +-@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo +-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \ +-@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po ++@GMAKE_TRUE@override COMPILE.post = -c -o $@ ++@GMAKE_TRUE@override POSTCOMPILE = + @GMAKE_TRUE@else + @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \ + @GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC) +diff -Nbaur gdb-7.7.1/sim/common/Make-common.in gdb-7.7.1-arm/sim/common/Make-common.in +--- gdb-7.7.1/sim/common/Make-common.in 2014-01-08 09:23:36.000000000 +0000 ++++ gdb-7.7.1-arm/sim/common/Make-common.in 2014-05-18 17:05:16.105567001 +0100 +@@ -415,10 +415,8 @@ + # Note that we put the dependencies into a .Tpo file, then move them + # into place if the compile succeeds. We need this because gcc does + # not atomically write the dependency output file. +-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \ +-@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo +-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \ +-@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po ++@GMAKE_TRUE@override COMPILE.post = -c -o $@ ++@GMAKE_TRUE@override POSTCOMPILE = + @GMAKE_TRUE@else + @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \ + @GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC) diff --git a/dkarm-eabi/patches/gdb-7.7.patch b/dkarm-eabi/patches/gdb-7.7.patch deleted file mode 100644 index 63f9ca5..0000000 --- a/dkarm-eabi/patches/gdb-7.7.patch +++ /dev/null @@ -1,3004 +0,0 @@ -diff -Nbaur gdb-7.7/gdb/Makefile.in gdb-7.7-arm/gdb/Makefile.in ---- gdb-7.7/gdb/Makefile.in 2014-02-06 02:21:29.000000000 +0000 -+++ gdb-7.7-arm/gdb/Makefile.in 2014-02-16 19:43:34.000000000 +0000 -@@ -2307,10 +2307,8 @@ - # Note that we put the dependencies into a .Tpo file, then move them - # into place if the compile succeeds. We need this because gcc does - # not atomically write the dependency output file. --@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \ --@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo --@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \ --@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po -+@GMAKE_TRUE@override COMPILE.post = -c -o $@ -+@GMAKE_TRUE@override POSTCOMPILE = - @GMAKE_TRUE@else - @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \ - @GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC) -diff -Nbaur gdb-7.7/gdb/Makefile.in.orig gdb-7.7-arm/gdb/Makefile.in.orig ---- gdb-7.7/gdb/Makefile.in.orig 1970-01-01 01:00:00.000000000 +0100 -+++ gdb-7.7-arm/gdb/Makefile.in.orig 2014-02-06 02:21:29.000000000 +0000 -@@ -0,0 +1,2339 @@ -+# Copyright (C) 1989-2014 Free Software Foundation, Inc. -+ -+# This file is part of GDB. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 3 of the License, or -+# (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program. If not, see . -+ -+prefix = @prefix@ -+exec_prefix = @exec_prefix@ -+ -+host_alias = @host_alias@ -+target_alias = @target_alias@ -+program_transform_name = @program_transform_name@ -+bindir = @bindir@ -+libdir = @libdir@ -+tooldir = $(libdir)/$(target_alias) -+ -+datadir = @datadir@ -+localedir = @localedir@ -+mandir = @mandir@ -+man1dir = $(mandir)/man1 -+man2dir = $(mandir)/man2 -+man3dir = $(mandir)/man3 -+man4dir = $(mandir)/man4 -+man5dir = $(mandir)/man5 -+man6dir = $(mandir)/man6 -+man7dir = $(mandir)/man7 -+man8dir = $(mandir)/man8 -+man9dir = $(mandir)/man9 -+infodir = @infodir@ -+datarootdir = @datarootdir@ -+docdir = @docdir@ -+htmldir = @htmldir@ -+pdfdir = @pdfdir@ -+includedir = @includedir@ -+ -+install_sh = @install_sh@ -+ -+# This can be referenced by `LIBINTL' as computed by -+# ZW_GNU_GETTEXT_SISTER_DIR. -+top_builddir = . -+ -+SHELL = @SHELL@ -+EXEEXT = @EXEEXT@ -+ -+AWK = @AWK@ -+LN_S = @LN_S@ -+ -+INSTALL = @INSTALL@ -+INSTALL_PROGRAM = @INSTALL_PROGRAM@ -+INSTALL_SCRIPT = @INSTALL_SCRIPT@ -+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -+INSTALL_DATA = @INSTALL_DATA@ -+ -+DESTDIR = -+ -+AR = @AR@ -+AR_FLAGS = qv -+RANLIB = @RANLIB@ -+DLLTOOL = @DLLTOOL@ -+WINDRES = @WINDRES@ -+MIG = @MIG@ -+STRIP = @STRIP@ -+ -+XGETTEXT = @XGETTEXT@ -+GMSGFMT = @GMSGFMT@ -+MSGMERGE = msgmerge -+ -+PACKAGE = @PACKAGE@ -+CATALOGS = @CATALOGS@ -+ -+# If you are compiling with GCC, make sure that either 1) You have the -+# fixed include files where GCC can reach them, or 2) You use the -+# -traditional flag. Otherwise the ioctl calls in inflow.c -+# will be incorrectly compiled. The "fixincludes" script in the gcc -+# distribution will fix your include files up. -+CC=@CC@ -+ -+# Dependency tracking information. -+DEPMODE = @CCDEPMODE@ -+DEPDIR = @DEPDIR@ -+depcomp = $(SHELL) $(srcdir)/../depcomp -+ -+# Note that these are overridden by GNU make-specific code below if -+# GNU make is used. The overrides implement dependency tracking. -+COMPILE.pre = $(CC) -+COMPILE.post = -c -o $@ -+COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post) -+POSTCOMPILE = @true -+ -+# Directory containing source files. -+srcdir = @srcdir@ -+VPATH = @srcdir@ -+ -+YACC=@YACC@ -+ -+# This is used to rebuild ada-lex.c from ada-lex.l. If the program is -+# not defined, but ada-lex.c is present, compilation will continue, -+# possibly with a warning. -+FLEX = flex -+ -+YLWRAP = $(srcdir)/../ylwrap -+ -+# where to find makeinfo, preferably one designed for texinfo-2 -+MAKEINFO = @MAKEINFO@ -+MAKEINFOFLAGS = @MAKEINFOFLAGS@ -+MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@ -+MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS) -+ -+MAKEHTML = $(MAKEINFO_CMD) --html -+MAKEHTMLFLAGS = -+ -+# Set this up with gcc if you have gnu ld and the loader will print out -+# line numbers for undefined references. -+#CC_LD=gcc -static -+CC_LD=$(CC) -+ -+# Where is our "include" directory? Typically $(srcdir)/../include. -+# This is essentially the header file directory for the library -+# routines in libiberty. -+INCLUDE_DIR = $(srcdir)/../include -+INCLUDE_CFLAGS = -I$(INCLUDE_DIR) -+ -+# Where is the "-liberty" library? Typically in ../libiberty. -+LIBIBERTY = ../libiberty/libiberty.a -+ -+# Where is the BFD library? Typically in ../bfd. -+BFD_DIR = ../bfd -+BFD = $(BFD_DIR)/libbfd.a -+BFD_SRC = $(srcdir)/$(BFD_DIR) -+BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC) -+ -+# Where is the decnumber library? Typically in ../libdecnumber. -+LIBDECNUMBER_DIR = ../libdecnumber -+LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a -+LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR) -+LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC) -+ -+# Where is the READLINE library? Typically in ../readline. -+READLINE_DIR = ../readline -+READLINE_SRC = $(srcdir)/$(READLINE_DIR) -+READLINE = @READLINE@ -+READLINE_DEPS = @READLINE_DEPS@ -+READLINE_CFLAGS = @READLINE_CFLAGS@ -+ -+# Where is expat? This will be empty if expat was not available. -+LIBEXPAT = @LIBEXPAT@ -+ -+# Where is lzma? This will be empty if lzma was not available. -+LIBLZMA = @LIBLZMA@ -+ -+# Where is libbabeltrace? This will be empty if lbabeltrace was not -+# available. -+LIBBABELTRACE = @LIBBABELTRACE@ -+ -+WARN_CFLAGS = @WARN_CFLAGS@ -+WERROR_CFLAGS = @WERROR_CFLAGS@ -+GDB_WARN_CFLAGS = $(WARN_CFLAGS) -+GDB_WERROR_CFLAGS = $(WERROR_CFLAGS) -+ -+GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " \ -+ | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"` -+GDB_WARN_CFLAGS_NO_DEFS = `echo " $(GDB_WARN_CFLAGS) " \ -+ | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"` -+ -+RDYNAMIC = @RDYNAMIC@ -+ -+# Where is the INTL library? Typically in ../intl. -+INTL = @LIBINTL@ -+INTL_DEPS = @LIBINTL_DEP@ -+INTL_CFLAGS = @INCINTL@ -+ -+# Did the user give us a --with-gdb-datadir option? -+GDB_DATADIR = @GDB_DATADIR@ -+ -+# Flags to pass to gdb when invoked with "make run". -+GDBFLAGS = -+ -+# Helper code from gnulib. -+GNULIB_BUILDDIR = build-gnulib -+LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a -+INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import -+ -+# Generated headers in the gnulib directory. These must be listed -+# so that they are generated before other files are compiled. -+GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@ -+ -+# -+# CLI sub directory definitons -+# -+SUBDIR_CLI_OBS = \ -+ cli-dump.o \ -+ cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \ -+ cli-logging.o \ -+ cli-interp.o cli-utils.o -+SUBDIR_CLI_SRCS = \ -+ cli/cli-dump.c \ -+ cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \ -+ cli/cli-logging.c \ -+ cli/cli-interp.c cli/cli-utils.c -+SUBDIR_CLI_DEPS = -+SUBDIR_CLI_LDFLAGS= -+SUBDIR_CLI_CFLAGS= -+ -+# -+# MI sub directory definitons -+# -+SUBDIR_MI_OBS = \ -+ mi-out.o mi-console.o \ -+ mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \ -+ mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \ -+ mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \ -+ mi-cmd-info.o mi-interp.o \ -+ mi-main.o mi-parse.o mi-getopt.o -+SUBDIR_MI_SRCS = \ -+ mi/mi-out.c mi/mi-console.c \ -+ mi/mi-cmds.c mi/mi-cmd-catch.c mi/mi-cmd-env.c \ -+ mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \ -+ mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \ -+ mi/mi-cmd-target.c mi/mi-cmd-info.c mi/mi-interp.c \ -+ mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c -+SUBDIR_MI_DEPS = -+SUBDIR_MI_LDFLAGS= -+SUBDIR_MI_CFLAGS= -+ -+# -+# TUI sub directory definitions -+# -+ -+SUBDIR_TUI_OBS = \ -+ tui-command.o \ -+ tui-data.o \ -+ tui-disasm.o \ -+ tui-file.o \ -+ tui-hooks.o \ -+ tui-interp.o \ -+ tui-io.o \ -+ tui-layout.o \ -+ tui-out.o \ -+ tui-regs.o \ -+ tui-source.o \ -+ tui-stack.o \ -+ tui-win.o \ -+ tui-windata.o \ -+ tui-wingeneral.o \ -+ tui-winsource.o \ -+ tui.o -+ -+SUBDIR_TUI_SRCS = \ -+ tui/tui-command.c \ -+ tui/tui-data.c \ -+ tui/tui-disasm.c \ -+ tui/tui-file.c \ -+ tui/tui-hooks.c \ -+ tui/tui-interp.c \ -+ tui/tui-io.c \ -+ tui/tui-layout.c \ -+ tui/tui-out.c \ -+ tui/tui-regs.c \ -+ tui/tui-source.c \ -+ tui/tui-stack.c \ -+ tui/tui-win.c \ -+ tui/tui-windata.c \ -+ tui/tui-wingeneral.c \ -+ tui/tui-winsource.c \ -+ tui/tui.c -+ -+SUBDIR_TUI_DEPS = -+SUBDIR_TUI_LDFLAGS= -+SUBDIR_TUI_CFLAGS= \ -+ -DTUI=1 -+ -+# -+# python sub directory definitons -+# -+SUBDIR_PYTHON_OBS = \ -+ python.o \ -+ py-arch.o \ -+ py-auto-load.o \ -+ py-block.o \ -+ py-bpevent.o \ -+ py-breakpoint.o \ -+ py-cmd.o \ -+ py-continueevent.o \ -+ py-event.o \ -+ py-evtregistry.o \ -+ py-evts.o \ -+ py-exitedevent.o \ -+ py-finishbreakpoint.o \ -+ py-frame.o \ -+ py-framefilter.o \ -+ py-function.o \ -+ py-gdb-readline.o \ -+ py-inferior.o \ -+ py-infthread.o \ -+ py-lazy-string.o \ -+ py-linetable.o \ -+ py-newobjfileevent.o \ -+ py-objfile.o \ -+ py-param.o \ -+ py-prettyprint.o \ -+ py-progspace.o \ -+ py-signalevent.o \ -+ py-stopevent.o \ -+ py-symbol.o \ -+ py-symtab.o \ -+ py-threadevent.o \ -+ py-type.o \ -+ py-utils.o \ -+ py-value.o -+ -+SUBDIR_PYTHON_SRCS = \ -+ python/python.c \ -+ python/py-arch.c \ -+ python/py-auto-load.c \ -+ python/py-block.c \ -+ python/py-bpevent.c \ -+ python/py-breakpoint.c \ -+ python/py-cmd.c \ -+ python/py-continueevent.c \ -+ python/py-event.c \ -+ python/py-evtregistry.c \ -+ python/py-evts.c \ -+ python/py-exitedevent.c \ -+ python/py-finishbreakpoint.c \ -+ python/py-frame.c \ -+ python/py-framefilter.c \ -+ python/py-function.c \ -+ python/py-gdb-readline.c \ -+ python/py-inferior.c \ -+ python/py-infthread.c \ -+ python/py-lazy-string.c \ -+ python/py-linetable.c \ -+ python/py-newobjfileevent.c \ -+ python/py-objfile.c \ -+ python/py-param.c \ -+ python/py-prettyprint.c \ -+ python/py-progspace.c \ -+ python/py-signalevent.c \ -+ python/py-stopevent.c \ -+ python/py-symbol.c \ -+ python/py-symtab.c \ -+ python/py-threadevent.c \ -+ python/py-type.c \ -+ python/py-utils.c \ -+ python/py-value.c -+SUBDIR_PYTHON_DEPS = -+SUBDIR_PYTHON_LDFLAGS= -+SUBDIR_PYTHON_CFLAGS= -+ -+# Opcodes currently live in one of two places. Either they are in the -+# opcode library, typically ../opcodes, or they are in a header file -+# in INCLUDE_DIR. -+# Where is the "-lopcodes" library, with (some of) the opcode tables and -+# disassemblers? -+OPCODES_DIR = ../opcodes -+OPCODES_SRC = $(srcdir)/$(OPCODES_DIR) -+OPCODES = $(OPCODES_DIR)/libopcodes.a -+# Where are the other opcode tables which only have header file -+# versions? -+OP_INCLUDE = $(INCLUDE_DIR)/opcode -+# Some source files like to use #include "opcodes/file.h" -+OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/.. -+ -+# The simulator is usually nonexistent; targets that include one -+# should set this to list all the .o or .a files to be linked in. -+SIM = @SIM@ -+ -+WIN32LIBS = @WIN32LIBS@ -+ -+# Tcl et al cflags and libraries -+TCL = @TCL_LIBRARY@ -+TCL_CFLAGS = @TCL_INCLUDE@ -+GDBTKLIBS = @GDBTKLIBS@ -+# Extra flags that the GDBTK files need: -+GDBTK_CFLAGS = @GDBTK_CFLAGS@ -+ -+TK = @TK_LIBRARY@ -+TK_CFLAGS = @TK_INCLUDE@ -+ -+X11_CFLAGS = @TK_XINCLUDES@ -+X11_LDFLAGS = -+X11_LIBS = -+ -+WIN32LDAPP = @WIN32LDAPP@ -+ -+LIBGUI = @LIBGUI@ -+GUI_CFLAGS_X = @GUI_CFLAGS_X@ -+IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X) -+ -+ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS) -+ -+# The version of gdbtk we're building. This should be kept -+# in sync with GDBTK_VERSION and friends in gdbtk.h. -+GDBTK_VERSION = 1.0 -+GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION) -+ -+# Gdbtk requires an absolute path to the source directory or -+# the testsuite won't run properly. -+GDBTK_SRC_DIR = @GDBTK_SRC_DIR@ -+ -+SUBDIR_GDBTK_OBS = \ -+ gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \ -+ gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o -+SUBDIR_GDBTK_SRCS = \ -+ gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \ -+ gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \ -+ gdbtk/generic/gdbtk-interp.c \ -+ gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \ -+ gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \ -+ gdbtk/generic/gdbtk-main.c -+SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS) -+SUBDIR_GDBTK_LDFLAGS= -+SUBDIR_GDBTK_CFLAGS= -DGDBTK -+ -+CONFIG_OBS= @CONFIG_OBS@ -+CONFIG_SRCS= @CONFIG_SRCS@ -+CONFIG_DEPS= @CONFIG_DEPS@ -+CONFIG_LDFLAGS = @CONFIG_LDFLAGS@ -+ENABLE_CFLAGS= @ENABLE_CFLAGS@ -+CONFIG_ALL= @CONFIG_ALL@ -+CONFIG_CLEAN= @CONFIG_CLEAN@ -+CONFIG_INSTALL = @CONFIG_INSTALL@ -+CONFIG_UNINSTALL = @CONFIG_UNINSTALL@ -+HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@ -+ -+# -I. for config files. -+# -I$(srcdir) for gdb internal headers. -+# -I$(srcdir)/config for more generic config files. -+ -+# It is also possible that you will need to add -I/usr/include/sys if -+# your system doesn't have fcntl.h in /usr/include (which is where it -+# should be according to Posix). -+DEFS = @DEFS@ -+GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \ -+ -DLOCALEDIR="\"$(localedir)\"" $(DEFS) -+ -+# MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory. -+GLOBAL_CFLAGS = $(MH_CFLAGS) -+ -+PROFILE_CFLAGS = @PROFILE_CFLAGS@ -+ -+# CFLAGS is specifically reserved for setting from the command line -+# when running make. I.E. "make CFLAGS=-Wmissing-prototypes". -+CFLAGS = @CFLAGS@ -+ -+# Set by configure, for e.g. expat. Python installations are such that -+# C headers are included using their basename (for example, we #include -+# rather than, say, ). Since the file names -+# are sometimes a little generic, we think that the risk of collision -+# with other header files is high. If that happens, we try to mitigate -+# a bit the consequences by putting the Python includes last in the list. -+INTERNAL_CPPFLAGS = @CPPFLAGS@ @PYTHON_CPPFLAGS@ -+ -+# Need to pass this to testsuite for "make check". Probably should be -+# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in -+# so "make check" has the same result no matter where it is run. -+CXXFLAGS = -g -O -+ -+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. -+INTERNAL_CFLAGS_BASE = \ -+ $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \ -+ $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \ -+ $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \ -+ $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS) -+INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS) -+INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS) -+ -+# LDFLAGS is specifically reserved for setting from the command line -+# when running make. -+LDFLAGS = @LDFLAGS@ -+ -+# Profiling options need to go here to work. -+# I think it's perfectly reasonable for a user to set -pg in CFLAGS -+# and have it work; that's why CFLAGS is here. -+# PROFILE_CFLAGS is _not_ included, however, because we use monstartup. -+INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS) -+ -+# If your system is missing alloca(), or, more likely, it's there but -+# it doesn't work, then refer to libiberty. -+ -+# Libraries and corresponding dependencies for compiling gdb. -+# XM_CLIBS, defined in *config files, have host-dependent libs. -+# LIBIBERTY appears twice on purpose. -+CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \ -+ $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \ -+ $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) \ -+ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) -+CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \ -+ $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) -+ -+ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES) -+ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES) -+ -+DIST=gdb -+ -+LINT=/usr/5bin/lint -+LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \ -+ $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \ -+ $(INTL_CFLAGS) -+ -+RUNTEST = runtest -+RUNTESTFLAGS= -+ -+# XML files to build in to GDB. -+XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \ -+ $(srcdir)/features/library-list.dtd \ -+ $(srcdir)/features/library-list-aix.dtd \ -+ $(srcdir)/features/library-list-svr4.dtd $(srcdir)/features/osdata.dtd \ -+ $(srcdir)/features/threads.dtd $(srcdir)/features/traceframe-info.dtd \ -+ $(srcdir)/features/btrace.dtd -+ -+# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX -+# interface to the serial port. Hopefully if get ported to OS/2, VMS, -+# etc., then there will be (as part of the C library or perhaps as -+# part of libiberty) a POSIX interface. But at least for now the -+# host-dependent makefile fragment might need to use something else -+# besides ser-unix.o -+SER_HARDWIRE = @SER_HARDWIRE@ -+ -+# The `remote' debugging target is supported for most architectures, -+# but not all (e.g. 960) -+REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \ -+ remote-notif.o ctf.o -+ -+# This is remote-sim.o if a simulator is to be linked in. -+SIM_OBS = @SIM_OBS@ -+ -+# Target-dependent object files. -+TARGET_OBS = @TARGET_OBS@ -+ -+# All target-dependent objects files that require 64-bit CORE_ADDR -+# (used with --enable-targets=all --enable-64-bit-bfd). -+ALL_64_TARGET_OBS = \ -+ aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \ -+ alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \ -+ alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \ -+ amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \ -+ amd64-linux-tdep.o amd64nbsd-tdep.o \ -+ amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \ -+ ia64-hpux-tdep.o ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \ -+ mips64obsd-tdep.o \ -+ sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \ -+ sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o -+ -+# All other target-dependent objects files (used with --enable-targets=all). -+ALL_TARGET_OBS = \ -+ armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \ -+ armnbsd-tdep.o armobsd-tdep.o \ -+ arm-tdep.o arm-wince-tdep.o \ -+ avr-tdep.o \ -+ bfin-linux-tdep.o bfin-tdep.o \ -+ cris-linux-tdep.o cris-tdep.o \ -+ dicos-tdep.o \ -+ frv-linux-tdep.o frv-tdep.o \ -+ h8300-tdep.o \ -+ hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \ -+ hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \ -+ i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \ -+ i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \ -+ i386-sol2-tdep.o i386-tdep.o i387-tdep.o \ -+ i386-dicos-tdep.o i386-darwin-tdep.o \ -+ iq2000-tdep.o \ -+ linux-tdep.o \ -+ lm32-tdep.o \ -+ m32c-tdep.o \ -+ m32r-linux-tdep.o m32r-tdep.o \ -+ m68hc11-tdep.o \ -+ m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \ -+ m88k-tdep.o \ -+ mep-tdep.o \ -+ microblaze-tdep.o microblaze-linux-tdep.o \ -+ mips-irix-tdep.o mips-linux-tdep.o \ -+ mipsnbsd-tdep.o mips-tdep.o \ -+ mn10300-linux-tdep.o mn10300-tdep.o \ -+ moxie-tdep.o \ -+ msp430-tdep.o \ -+ mt-tdep.o \ -+ nios2-tdep.o nios2-linux-tdep.o \ -+ nto-tdep.o \ -+ ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \ -+ ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \ -+ rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \ -+ rs6000-lynx178-tdep.o \ -+ rx-tdep.o \ -+ s390-linux-tdep.o \ -+ score-tdep.o \ -+ sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \ -+ sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \ -+ sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \ -+ spu-tdep.o spu-multiarch.o solib-spu.o \ -+ tic6x-tdep.o tic6x-linux-tdep.o \ -+ tilegx-tdep.o tilegx-linux-tdep.o \ -+ v850-tdep.o \ -+ vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \ -+ xstormy16-tdep.o \ -+ xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \ -+ glibc-tdep.o \ -+ bsd-uthread.o \ -+ nbsd-tdep.o obsd-tdep.o \ -+ sol2-tdep.o \ -+ solib-frv.o solib-irix.o solib-svr4.o \ -+ solib-som.o solib-pa64.o solib-darwin.o solib-dsbt.o \ -+ dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \ -+ remote-m32r-sdi.o remote-mips.o \ -+ xcoffread.o \ -+ symfile-mem.o \ -+ windows-tdep.o \ -+ linux-record.o \ -+ ravenscar-thread.o -+ -+# Host-dependent makefile fragment comes in here. -+@host_makefile_frag@ -+# End of host-dependent makefile fragment -+ -+FLAGS_TO_PASS = \ -+ "prefix=$(prefix)" \ -+ "exec_prefix=$(exec_prefix)" \ -+ "infodir=$(infodir)" \ -+ "datarootdir=$(datarootdir)" \ -+ "docdir=$(docdir)" \ -+ "htmldir=$(htmldir)" \ -+ "pdfdir=$(pdfdir)" \ -+ "libdir=$(libdir)" \ -+ "mandir=$(mandir)" \ -+ "datadir=$(datadir)" \ -+ "includedir=$(includedir)" \ -+ "against=$(against)" \ -+ "DESTDIR=$(DESTDIR)" \ -+ "AR=$(AR)" \ -+ "AR_FLAGS=$(AR_FLAGS)" \ -+ "CC=$(CC)" \ -+ "CFLAGS=$(CFLAGS)" \ -+ "CXX=$(CXX)" \ -+ "CXXFLAGS=$(CXXFLAGS)" \ -+ "DLLTOOL=$(DLLTOOL)" \ -+ "LDFLAGS=$(LDFLAGS)" \ -+ "RANLIB=$(RANLIB)" \ -+ "MAKEINFO=$(MAKEINFO)" \ -+ "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \ -+ "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \ -+ "MAKEHTML=$(MAKEHTML)" \ -+ "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \ -+ "INSTALL=$(INSTALL)" \ -+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ -+ "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \ -+ "INSTALL_DATA=$(INSTALL_DATA)" \ -+ "RUNTEST=$(RUNTEST)" \ -+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" -+ -+# Flags that we pass when building the testsuite. -+ -+# empty for native, $(target_alias)/ for cross -+target_subdir = @target_subdir@ -+ -+CC_FOR_TARGET = ` \ -+ if [ -f $${rootme}/../gcc/xgcc ] ; then \ -+ if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \ -+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \ -+ else \ -+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \ -+ fi; \ -+ else \ -+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ -+ echo $(CC); \ -+ else \ -+ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ -+ fi; \ -+ fi` -+ -+CXX = gcc -+CXX_FOR_TARGET = ` \ -+ if [ -f $${rootme}/../gcc/xgcc ] ; then \ -+ if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \ -+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \ -+ else \ -+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \ -+ fi; \ -+ else \ -+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ -+ echo $(CXX); \ -+ else \ -+ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ -+ fi; \ -+ fi` -+ -+# The use of $$(x_FOR_TARGET) reduces the command line length by not -+# duplicating the lengthy definition. -+TARGET_FLAGS_TO_PASS = \ -+ "prefix=$(prefix)" \ -+ "exec_prefix=$(exec_prefix)" \ -+ "against=$(against)" \ -+ 'CC=$$(CC_FOR_TARGET)' \ -+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ -+ "CFLAGS=$(CFLAGS)" \ -+ 'CXX=$$(CXX_FOR_TARGET)' \ -+ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \ -+ "CXXFLAGS=$(CXXFLAGS)" \ -+ "INSTALL=$(INSTALL)" \ -+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ -+ "INSTALL_DATA=$(INSTALL_DATA)" \ -+ "MAKEINFO=$(MAKEINFO)" \ -+ "MAKEHTML=$(MAKEHTML)" \ -+ "RUNTEST=$(RUNTEST)" \ -+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ -+ "FORCE_PARALLEL=$(FORCE_PARALLEL)" -+ -+# All source files that go into linking GDB. -+# Links made at configuration time should not be specified here, since -+# SFILES is used in building the distribution archive. -+ -+SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \ -+ ada-varobj.c \ -+ addrmap.c auto-load.c \ -+ auxv.c ax-general.c ax-gdb.c \ -+ agent.c \ -+ bcache.c \ -+ bfd-target.c \ -+ block.c blockframe.c \ -+ breakpoint.c break-catch-sig.c break-catch-throw.c \ -+ build-id.c buildsym.c \ -+ c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \ -+ charset.c cleanups.c cli-out.c coffread.c coff-pe-read.c \ -+ complaints.c completer.c continuations.c corefile.c corelow.c \ -+ cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \ -+ d-lang.c d-valprint.c \ -+ cp-name-parser.y \ -+ dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \ -+ dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \ -+ dwarf2-frame-tailcall.c \ -+ elfread.c environ.c eval.c event-loop.c event-top.c \ -+ exceptions.c expprint.c \ -+ f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \ -+ findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \ -+ gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \ -+ gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \ -+ go-exp.y go-lang.c go-typeprint.c go-valprint.c \ -+ inf-loop.c \ -+ infcall.c \ -+ infcmd.c inflow.c infrun.c \ -+ inline-frame.c \ -+ interps.c \ -+ jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \ -+ language.c linespec.c minidebug.c \ -+ m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \ -+ macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \ -+ mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \ -+ memrange.c mi/mi-common.c \ -+ objc-lang.c \ -+ objfiles.c osabi.c observer.c osdata.c \ -+ opencl-lang.c \ -+ p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \ -+ proc-service.list progspace.c \ -+ prologue-value.c psymtab.c \ -+ regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \ -+ sentinel-frame.c \ -+ serial.c ser-base.c ser-unix.c skip.c \ -+ solib.c solib-target.c source.c \ -+ stabsread.c stack.c probe.c stap-probe.c std-regs.c \ -+ symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \ -+ target.c target-dcache.c target-descriptions.c target-memory.c \ -+ thread.c top.c tracepoint.c \ -+ trad-frame.c \ -+ tramp-frame.c \ -+ typeprint.c \ -+ ui-out.c utils.c ui-file.h ui-file.c \ -+ user-regs.c \ -+ valarith.c valops.c valprint.c value.c varobj.c common/vec.c \ -+ xml-tdesc.c xml-support.c \ -+ inferior.c gdb_usleep.c \ -+ record.c record-full.c gcore.c \ -+ jit.c \ -+ xml-syscall.c \ -+ annotate.c common/signals.c copying.c dfp.c gdb.c inf-child.c \ -+ regset.c sol-thread.c windows-termcap.c \ -+ common/gdb_vecs.c common/common-utils.c common/xml-utils.c \ -+ common/ptid.c common/buffer.c gdb-dlfcn.c common/agent.c \ -+ common/format.c common/filestuff.c btrace.c record-btrace.c ctf.c \ -+ target/waitstatus.c -+ -+LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c -+ -+# Header files that need to have srcdir added. Note that in the cases -+# where we use a macro like $(gdbcmd_h), things are carefully arranged -+# so that each .h file is listed exactly once (M-x tags-search works -+# wrong if TAGS has files twice). Because this is tricky to get -+# right, it is probably easiest just to list .h files here directly. -+ -+HFILES_NO_SRCDIR = \ -+common/gdb_signals.h common/gdb_thread_db.h common/gdb_vecs.h \ -+common/i386-xstate.h common/linux-ptrace.h common/mips-linux-watch.h \ -+proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \ -+ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \ -+exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \ -+i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \ -+ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \ -+c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \ -+cli/cli-decode.h cli/cli-cmds.h cli/cli-utils.h \ -+cli/cli-script.h macrotab.h symtab.h common/version.h \ -+gnulib/import/string.in.h gnulib/import/str-two-way.h \ -+gnulib/import/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \ -+gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \ -+amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \ -+gdbarch.h bsd-uthread.h memory-map.h memrange.h \ -+mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \ -+ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \ -+f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \ -+objfiles.h common/vec.h disasm.h mips-tdep.h ser-base.h \ -+gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \ -+inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h inf-ttrace.h \ -+solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \ -+m2-lang.h stack.h charset.h cleanups.h addrmap.h command.h solist.h source.h \ -+target.h target-dcache.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \ -+tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \ -+tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \ -+tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \ -+tui/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \ -+expression.h score-tdep.h gdb_select.h ser-tcp.h \ -+build-id.h buildsym.h valprint.h \ -+typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \ -+mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \ -+complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \ -+common/gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \ -+interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \ -+amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \ -+sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \ -+coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \ -+m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \ -+doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \ -+rs6000-tdep.h rs6000-aix-tdep.h \ -+common/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \ -+language.h nbsd-tdep.h solib-svr4.h \ -+macroexp.h ui-file.h regcache.h tracepoint.h i386-tdep.h \ -+inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \ -+regformats/regdef.h config/alpha/nm-osf3.h config/i386/nm-i386gnu.h \ -+config/i386/nm-fbsd.h \ -+config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \ -+top.h bsd-kvm.h gdb-stabs.h reggroups.h \ -+annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \ -+remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \ -+sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \ -+gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \ -+psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \ -+amd64-darwin-tdep.h charset-list.h \ -+config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \ -+dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \ -+i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \ -+osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \ -+python/python-internal.h python/python.h ravenscar-thread.h record.h \ -+record-full.h solib-aix.h \ -+solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \ -+gnulib/import/extra/snippet/arg-nonnull.h gnulib/import/extra/snippet/c++defs.h \ -+gnulib/import/extra/snippet/warn-on-use.h \ -+gnulib/import/stddef.in.h gnulib/import/inttypes.in.h inline-frame.h skip.h \ -+common/common-utils.h common/xml-utils.h common/buffer.h common/ptid.h \ -+common/format.h common/host-defs.h utils.h common/queue.h \ -+common/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \ -+gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h common/linux-btrace.h \ -+ctf.h common/i386-cpuid.h common/i386-gcc-cpuid.h target/resume.h \ -+target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h -+ -+# Header files that already have srcdir in them, or which are in objdir. -+ -+HFILES_WITH_SRCDIR = ../bfd/bfd.h jit-reader.h -+ -+ -+# GDB "info" files, which should be included in their entirety -+INFOFILES = gdb.info* -+ -+REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar -+ -+# {X,T,NAT}DEPFILES are something of a pain in that it's hard to -+# default their values the way we do for SER_HARDWIRE; in the future -+# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other -+# variables analogous to SER_HARDWIRE which get defaulted in this -+# Makefile.in -+ -+DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \ -+ $(REMOTE_OBS) $(SIM_OBS) -+ -+SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS) -+# Don't include YYFILES (*.c) because we already include *.y in SFILES, -+# and it's more useful to see it in the .y file. -+TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \ -+ $(CONFIG_SRCS) -+TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR) -+ -+COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \ -+ version.o \ -+ annotate.o \ -+ addrmap.o \ -+ auto-load.o auxv.o \ -+ agent.o \ -+ bfd-target.o \ -+ blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \ -+ findvar.o regcache.o cleanups.o \ -+ charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \ -+ source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \ -+ block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \ -+ linespec.o dictionary.o \ -+ infcall.o \ -+ infcmd.o infrun.o \ -+ expprint.o environ.o stack.o thread.o \ -+ exceptions.o \ -+ filesystem.o \ -+ filestuff.o \ -+ inf-child.o \ -+ interps.o \ -+ minidebug.o \ -+ main.o \ -+ macrotab.o macrocmd.o macroexp.o macroscope.o \ -+ mi-common.o \ -+ event-loop.o event-top.o inf-loop.o completer.o \ -+ gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \ -+ osabi.o copying.o \ -+ memattr.o mem-break.o target.o target-dcache.o parse.o language.o \ -+ build-id.o buildsym.o \ -+ findcmd.o \ -+ std-regs.o \ -+ signals.o \ -+ exec.o reverse.o \ -+ bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \ -+ dbxread.o coffread.o coff-pe-read.o \ -+ dwarf2read.o mipsread.o stabsread.o corefile.o \ -+ dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \ -+ ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \ -+ ada-tasks.o ada-varobj.o c-varobj.o \ -+ ui-out.o cli-out.o \ -+ varobj.o vec.o \ -+ go-lang.o go-valprint.o go-typeprint.o \ -+ jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \ -+ m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \ -+ sentinel-frame.o \ -+ complaints.o typeprint.o \ -+ ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \ -+ ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \ -+ m2-valprint.o \ -+ serial.o mdebugread.o top.o utils.o \ -+ ui-file.o \ -+ user-regs.o \ -+ frame.o frame-unwind.o doublest.o \ -+ frame-base.o \ -+ inline-frame.o \ -+ gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \ -+ cp-namespace.o \ -+ reggroups.o regset.o \ -+ trad-frame.o \ -+ tramp-frame.o \ -+ solib.o solib-target.o \ -+ prologue-value.o memory-map.o memrange.o \ -+ xml-support.o xml-syscall.o xml-utils.o \ -+ target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \ -+ inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \ -+ gdb_vecs.o jit.o progspace.o skip.o probe.o \ -+ common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \ -+ format.o registry.o btrace.o record-btrace.o waitstatus.o -+ -+TSOBS = inflow.o -+ -+SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR) -+CLEANDIRS = $(SUBDIRS) -+ -+# List of subdirectories in the build tree that must exist. -+# This is used to force build failures in existing trees when -+# a new directory is added. -+# The format here is for the `case' shell command. -+REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory -+ -+# For now, shortcut the "configure GDB for fewer languages" stuff. -+YYFILES = c-exp.c \ -+ cp-name-parser.c \ -+ ada-lex.c \ -+ ada-exp.c \ -+ jv-exp.c \ -+ f-exp.c go-exp.c m2-exp.c p-exp.c -+YYOBJ = c-exp.o \ -+ cp-name-parser.o \ -+ ada-exp.o \ -+ jv-exp.o \ -+ f-exp.o go-exp.o m2-exp.o p-exp.o -+ -+# Things which need to be built when making a distribution. -+ -+DISTSTUFF = $(YYFILES) -+ -+ -+# All generated files which can be included by another file. -+generated_files = config.h observer.h observer.inc ada-lex.c jit-reader.h \ -+ $(GNULIB_H) $(NAT_GENERATED_FILES) gcore -+ -+.c.o: -+ $(COMPILE) $< -+ $(POSTCOMPILE) -+ -+all: gdb$(EXEEXT) $(CONFIG_ALL) -+ @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do -+ -+installcheck: -+ -+# The check target can not use subdir_do, because subdir_do does not -+# use TARGET_FLAGS_TO_PASS. -+check: force -+ @if [ -f testsuite/Makefile ]; then \ -+ rootme=`pwd`; export rootme; \ -+ rootsrc=`cd $(srcdir); pwd`; export rootsrc; \ -+ cd testsuite; \ -+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \ -+ else true; fi -+ -+check-perf: force -+ @if [ -f testsuite/Makefile ]; then \ -+ rootme=`pwd`; export rootme; \ -+ rootsrc=`cd $(srcdir); pwd`; export rootsrc; \ -+ cd testsuite; \ -+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \ -+ else true; fi -+ -+# The idea is to parallelize testing of multilibs, for example: -+# make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu} -+# will run 3 concurrent sessions of check, eventually testing all 10 -+# combinations. GNU make is required for the % pattern to work, as is -+# a shell that expands alternations within braces. If GNU make is not -+# used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to -+# prevent serialized checking due to the passed RUNTESTFLAGS. -+# FIXME: use config.status --config not --version, when available. -+check//%: force -+ @if [ -f testsuite/config.status ]; then \ -+ rootme=`pwd`; export rootme; \ -+ rootsrc=`cd $(srcdir); pwd`; export rootsrc; \ -+ target=`echo "$@" | sed 's,//.*,,'`; \ -+ variant=`echo "$@" | sed 's,^[^/]*//,,'`; \ -+ vardots=`echo "$$variant" | sed 's,/,.,g'`; \ -+ testdir=testsuite.$$vardots; \ -+ if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \ -+ configargs=`cd testsuite && ./config.status --version | \ -+ sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \ -+ (cd $$testdir && \ -+ eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \ -+ "\"--srcdir=\$$rootsrc/testsuite\"" \ -+ ); \ -+ else :; fi && cd $$testdir && \ -+ $(MAKE) $(TARGET_FLAGS_TO_PASS) \ -+ RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \ -+ FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \ -+ "$$target"; \ -+ else true; fi -+ -+info install-info clean-info dvi pdf install-pdf html install-html: force -+ @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do -+ -+# Traditionally "install" depends on "all". But it may be useful -+# not to; for example, if the user has made some trivial change to a -+# source file and doesn't care about rebuilding or just wants to save the -+# time it takes for make to check that all is up to date. -+# install-only is intended to address that need. -+install: all -+ @$(MAKE) $(FLAGS_TO_PASS) install-only -+ -+install-only: $(CONFIG_INSTALL) -+ transformed_name=`t='$(program_transform_name)'; \ -+ echo gdb | sed -e "$$t"` ; \ -+ if test "x$$transformed_name" = x; then \ -+ transformed_name=gdb ; \ -+ else \ -+ true ; \ -+ fi ; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \ -+ $(INSTALL_PROGRAM) gdb$(EXEEXT) \ -+ $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \ -+ $(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h -+ if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \ -+ then \ -+ transformed_name=`t='$(program_transform_name)'; \ -+ echo gcore | sed -e "$$t"` ; \ -+ if test "x$$transformed_name" = x; then \ -+ transformed_name=gcore ; \ -+ else \ -+ true ; \ -+ fi ; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \ -+ $(INSTALL_SCRIPT) gcore \ -+ $(DESTDIR)$(bindir)/$$transformed_name; \ -+ fi -+ @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do -+ -+install-strip: -+ $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ -+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ -+ `test -z '$(STRIP)' || \ -+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only -+ -+install-python: -+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb -+ -+uninstall: force $(CONFIG_UNINSTALL) -+ transformed_name=`t='$(program_transform_name)'; \ -+ echo gdb | sed -e $$t` ; \ -+ if test "x$$transformed_name" = x; then \ -+ transformed_name=gdb ; \ -+ else \ -+ true ; \ -+ fi ; \ -+ rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \ -+ $(DESTDIR)$(man1dir)/$$transformed_name.1 -+ if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \ -+ then \ -+ transformed_name=`t='$(program_transform_name)'; \ -+ echo gcore | sed -e "$$t"` ; \ -+ if test "x$$transformed_name" = x; then \ -+ transformed_name=gcore ; \ -+ else \ -+ true ; \ -+ fi ; \ -+ rm -f $(DESTDIR)$(bindir)/$$transformed_name; \ -+ fi -+ @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do -+ -+# The C++ name parser can be built standalone for testing. -+test-cp-name-parser.o: cp-name-parser.c -+ $(COMPILE) -DTEST_CPNAMES cp-name-parser.c -+ $(POSTCOMPILE) -+ -+test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY) -+ $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \ -+ test-cp-name-parser.o $(LIBIBERTY) -+ -+# We do this by grepping through sources. If that turns out to be too slow, -+# maybe we could just require every .o file to have an initialization routine -+# of a given name (top.o -> _initialize_top, etc.). -+# -+# Formatting conventions: The name of the _initialize_* routines must start -+# in column zero, and must not be inside #if. -+# -+# Note that the set of files with init functions might change, or the names -+# of the functions might change, so this files needs to depend on all the -+# object files that will be linked into gdb. -+ -+# FIXME: There is a problem with this approach - init.c may force -+# unnecessary files to be linked in. -+ -+# FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that -+# the first call is to _initialize_gdbtypes (implemented by explicitly -+# putting that function's name first in the init.l-tmp file). This is -+# a hack to ensure that all the architecture dependant global -+# builtin_type_* variables are initialized before anything else -+# (per-architecture code is called in the same order that it is -+# registered). The ``correct fix'' is to have all the builtin types -+# made part of the architecture and initialize them on-demand (using -+# gdbarch_data) just like everything else. The catch is that other -+# modules still take the address of these builtin types forcing them -+# to be variables, sigh! -+ -+# NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is -+# anchored on the first column and excludes the ``/'' character so -+# that it doesn't add the $(srcdir) prefix to any file that already -+# has an absolute path. It turns out that $(DEC)'s True64 make -+# automatically adds the $(srcdir) prefixes when it encounters files -+# in sub-directories such as cli/ and mi/. -+ -+# NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates -+# duplicates. Files in the gdb/ directory can end up appearing in -+# COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file). -+ -+INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS) -+init.c: $(INIT_FILES) -+ @echo Making init.c -+ @rm -f init.c-tmp init.l-tmp -+ @touch init.c-tmp -+ @echo gdbtypes > init.l-tmp -+ @-LANG=C ; export LANG ; \ -+ LC_ALL=C ; export LC_ALL ; \ -+ echo $(INIT_FILES) | \ -+ tr ' ' '\012' | \ -+ sed \ -+ -e '/^gdbtypes.[co]$$/d' \ -+ -e '/^init.[co]$$/d' \ -+ -e '/xdr_ld.[co]$$/d' \ -+ -e '/xdr_ptrace.[co]$$/d' \ -+ -e '/xdr_rdb.[co]$$/d' \ -+ -e '/udr.[co]$$/d' \ -+ -e '/udip2soc.[co]$$/d' \ -+ -e '/udi2go32.[co]$$/d' \ -+ -e '/version.[co]$$/d' \ -+ -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \ -+ -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \ -+ -e 's/\.[co]$$/.c/' \ -+ -e 's,signals\.c,common/signals\.c,' \ -+ -e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \ -+ while read f; do \ -+ sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \ -+ done | \ -+ while read f; do \ -+ case " $$fs " in \ -+ *" $$f "* ) ;; \ -+ * ) echo $$f ; fs="$$fs $$f";; \ -+ esac; \ -+ done >> init.l-tmp -+ @echo '/* Do not modify this file. */' >>init.c-tmp -+ @echo '/* It is created automatically by the Makefile. */'>>init.c-tmp -+ @echo '#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp -+ @echo 'extern void initialize_all_files(void);' >>init.c-tmp -+ @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' >init.c-tmp -+ @echo 'void' >>init.c-tmp -+ @echo 'initialize_all_files (void)' >>init.c-tmp -+ @echo '{' >>init.c-tmp -+ @sed -e 's/\(.*\)/ _initialize_\1 ();/' >init.c-tmp -+ @echo '}' >>init.c-tmp -+ @rm init.l-tmp -+ @mv init.c-tmp init.c -+ -+.PRECIOUS: init.c -+ -+# Create a library of the gdb object files and build GDB by linking -+# against that. -+# -+# init.o is very important. It pulls in the rest of GDB. -+LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o -+libgdb.a: $(LIBGDB_OBS) -+ -rm -f libgdb.a -+ $(AR) q libgdb.a $(LIBGDB_OBS) -+ $(RANLIB) libgdb.a -+ -+# Removing the old gdb first works better if it is running, at least on SunOS. -+gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(ADD_DEPS) $(CDEPS) $(TDEPLIBS) -+ rm -f gdb$(EXEEXT) -+ $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \ -+ -o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \ -+ $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES) -+ -+# Convenience rule to handle recursion. -+$(LIBGNU) $(GNULIB_H): all-lib -+all-lib: $(GNULIB_BUILDDIR)/Makefile -+ @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do -+.PHONY: all-lib -+ -+# Convenience rule to handle recursion. -+.PHONY: all-data-directory -+all-data-directory: data-directory/Makefile -+ @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do -+ -+# This is useful when debugging GDB, because some Unix's don't let you run GDB -+# on itself without copying the executable. So "make gdb1" will make -+# gdb and put a copy in gdb1, and you can run it with "gdb gdb1". -+# Removing gdb1 before the copy is the right thing if gdb1 is open -+# in another process. -+gdb1$(EXEEXT): gdb$(EXEEXT) -+ rm -f gdb1$(EXEEXT) -+ cp gdb$(EXEEXT) gdb1$(EXEEXT) -+ -+# Put the proper machine-specific files first, so M-. on a machine -+# specific routine gets the one for the correct machine. (FIXME: those -+# files go in twice; we should be removing them from the main list). -+ -+# TAGS depends on all the files that go into it so you can rebuild TAGS -+# with `make TAGS' and not have to say `rm TAGS' first. -+ -+GDB_NM_FILE = @GDB_NM_FILE@ -+TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR) -+ @echo Making TAGS -+ etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \ -+ `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \ -+ echo $(srcdir)/$$i ; \ -+ done ; for i in $(TAGFILES_WITH_SRCDIR); do \ -+ echo $$i ; \ -+ done) | sed -e 's/\.o$$/\.c/'` \ -+ `find $(srcdir)/config -name '*.h' -print` -+ -+tags: TAGS -+ -+clean mostlyclean: $(CONFIG_CLEAN) -+ @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do -+ rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp -+ rm -f init.c version.c observer.h observer.inc -+ rm -f gdb$(EXEEXT) core make.log -+ rm -f gdb[0-9]$(EXEEXT) -+ rm -f test-cp-name-parser$(EXEEXT) -+ rm -f xml-builtin.c stamp-xml -+ rm -f $(DEPDIR)/* -+ -+# This used to depend on c-exp.c m2-exp.c TAGS -+# I believe this is wrong; the makefile standards for distclean just -+# describe removing files; the only sort of "re-create a distribution" -+# functionality described is if the distributed files are unmodified. -+# NB: While GDBSERVER might be configured on native systems, it isn't -+# always included in SUBDIRS. Remove the gdbserver files explicitly. -+distclean: clean -+ @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do -+ rm -rf $(GNULIB_BUILDDIR) -+ rm -f gdbserver/config.status gdbserver/config.log -+ rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h -+ rm -f gdbserver/Makefile gdbserver/config.cache -+ rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h -+ rm -f y.output yacc.acts yacc.tmp y.tab.h -+ rm -f config.log config.cache -+ rm -f Makefile -+ rm -rf $(DEPDIR) -+ -+maintainer-clean: local-maintainer-clean do-maintainer-clean distclean -+realclean: maintainer-clean -+ -+local-maintainer-clean: -+ @echo "This command is intended for maintainers to use;" -+ @echo "it deletes files that may require special tools to rebuild." -+ rm -f c-exp.c \ -+ cp-name-parser.c \ -+ ada-lex.c ada-exp.c \ -+ jv-exp.tab \ -+ f-exp.c go-exp.c m2-exp.c p-exp.c -+ rm -f TAGS $(INFOFILES) -+ rm -f $(YYFILES) -+ rm -f nm.h config.status -+ -+do-maintainer-clean: -+ @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \ -+ subdir_do -+ -+diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS) -+ cd doc; $(MAKE) $(MFLAGS) diststuff -+ -+subdir_do: force -+ @for i in $(DODIRS); do \ -+ case $$i in \ -+ $(REQUIRED_SUBDIRS)) \ -+ if [ ! -f ./$$i/Makefile ] ; then \ -+ echo "Missing $$i/Makefile" >&2 ; \ -+ exit 1 ; \ -+ fi ;; \ -+ esac ; \ -+ if [ -f ./$$i/Makefile ] ; then \ -+ if (cd ./$$i; \ -+ $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \ -+ else exit 1 ; fi ; \ -+ else true ; fi ; \ -+ done -+ -+Makefile: Makefile.in config.status @frags@ -+ # Regenerate the Makefile and the tm.h / nm.h links. -+ CONFIG_FILES="Makefile" \ -+ CONFIG_COMMANDS= \ -+ CONFIG_HEADERS= \ -+ $(SHELL) config.status -+ -+$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status @frags@ -+ @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \ -+ CONFIG_COMMANDS="depfiles" \ -+ CONFIG_HEADERS= \ -+ CONFIG_LINKS= \ -+ $(SHELL) config.status -+ -+data-directory/Makefile: data-directory/Makefile.in config.status @frags@ -+ CONFIG_FILES="data-directory/Makefile" \ -+ CONFIG_COMMANDS="depfiles" \ -+ CONFIG_HEADERS= \ -+ CONFIG_LINKS= \ -+ $(SHELL) config.status -+ -+.PHONY: run -+run: Makefile -+ ./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS) -+ -+jit-reader.h: $(srcdir)/jit-reader.in -+ $(SHELL) config.status $@ -+ -+gcore: $(srcdir)/gcore.in -+ $(SHELL) config.status $@ -+ -+config.h: stamp-h ; @true -+stamp-h: $(srcdir)/config.in config.status -+ CONFIG_HEADERS=config.h:config.in \ -+ CONFIG_COMMANDS="default depdir" \ -+ CONFIG_FILES= \ -+ CONFIG_LINKS= \ -+ $(SHELL) config.status -+ -+config.status: $(srcdir)/configure configure.tgt configure.host development.sh -+ $(SHELL) config.status --recheck -+ -+ACLOCAL = aclocal -+ACLOCAL_AMFLAGS = -I ../config -+ -+# Keep these in sync with the includes in acinclude.m4. -+aclocal_m4_deps = \ -+ configure.ac \ -+ acx_configure_dir.m4 \ -+ libmcheck.m4 \ -+ ../bfd/bfd.m4 \ -+ ../config/acinclude.m4 \ -+ ../config/plugins.m4 \ -+ ../config/lead-dot.m4 \ -+ ../config/override.m4 \ -+ ../config/largefile.m4 \ -+ ../config/gettext-sister.m4 \ -+ ../config/lib-ld.m4 \ -+ ../config/lib-prefix.m4 \ -+ ../config/lib-link.m4 \ -+ ../config/acx.m4 \ -+ ../config/tcl.m4 \ -+ ../config/depstand.m4 \ -+ ../config/lcmessage.m4 \ -+ ../config/codeset.m4 \ -+ ../config/zlib.m4 -+ -+$(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps) -+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -+ -+AUTOCONF = autoconf -+configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4 -+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps) -+ cd $(srcdir) && $(AUTOCONF) -+ -+AUTOHEADER = autoheader -+$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps) -+ cd $(srcdir) && $(AUTOHEADER) -+ rm -f stamp-h -+ touch $@ -+ -+# automatic rebuilding in automake-generated Makefiles requires -+# this rule in the toplevel Makefile, which, with GNU make, causes -+# the desired updates through the implicit regeneration of the Makefile -+# and all of its prerequisites. -+am--refresh: -+ @: -+ -+force: -+ -+# Documentation! -+# GDB QUICK REFERENCE (TeX dvi file, CM fonts) -+doc/refcard.dvi: -+ cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) -+ -+# GDB QUICK REFERENCE (PostScript output, common PS fonts) -+doc/refcard.ps: -+ cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) -+ -+# GDB MANUAL: TeX dvi file -+doc/gdb.dvi: -+ cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS) -+ -+# GDB MANUAL: info file -+doc/gdb.info: -+ cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS) -+ -+# Make copying.c from COPYING -+$(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk -+ awk -f $(srcdir)/copying.awk \ -+ < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp -+ mv $(srcdir)/copying.tmp $(srcdir)/copying.c -+ -+version.c: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh -+ $(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \ -+ $(host_alias) $(target_alias) version.c -+ -+observer.h: observer.sh doc/observer.texi -+ ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h -+ -+observer.inc: observer.sh doc/observer.texi -+ ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc -+ -+lint: $(LINTFILES) -+ $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \ -+ `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'` -+ -+gdb.cxref: $(SFILES) -+ cxref -I. $(SFILES) >gdb.cxref -+ -+force_update: -+ -+# GNU Make has an annoying habit of putting *all* the Makefile variables -+# into the environment, unless you include this target as a circumvention. -+# Rumor is that this will be fixed (and this target can be removed) -+# in GNU Make 4.0. -+.NOEXPORT: -+ -+# GNU Make 3.63 has a different problem: it keeps tacking command line -+# overrides onto the definition of $(MAKE). This variable setting -+# will remove them. -+MAKEOVERRIDES= -+ -+ALLDEPFILES = \ -+ aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \ -+ aarch64-linux-nat.c \ -+ aix-thread.c \ -+ alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \ -+ alpha-tdep.c alpha-mdebug-tdep.c \ -+ alpha-linux-tdep.c alpha-osf1-tdep.c \ -+ alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \ -+ amd64-nat.c amd64-tdep.c \ -+ amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \ -+ amd64nbsd-nat.c amd64nbsd-tdep.c \ -+ amd64obsd-nat.c amd64obsd-tdep.c \ -+ amd64-darwin-tdep.c \ -+ amd64-dicos-tdep.c \ -+ amd64-linux-nat.c amd64-linux-tdep.c \ -+ amd64-sol2-tdep.c \ -+ arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \ -+ armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \ -+ avr-tdep.c \ -+ bfin-linux-tdep.c bfin-tdep.c \ -+ bsd-uthread.c bsd-kvm.c \ -+ core-regset.c \ -+ dcache.c dicos-tdep.c darwin-nat.c \ -+ exec.c \ -+ fbsd-nat.c \ -+ fork-child.c \ -+ glibc-tdep.c \ -+ go32-nat.c h8300-tdep.c \ -+ hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \ -+ hppa-linux-tdep.c hppa-linux-nat.c \ -+ hppabsd-nat.c hppabsd-tdep.c \ -+ hppaobsd-tdep.c \ -+ hppanbsd-nat.c hppanbsd-tdep.c \ -+ i386-tdep.c i386-linux-nat.c \ -+ i386v4-nat.c i386-cygwin-tdep.c \ -+ i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \ -+ i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \ -+ i387-tdep.c \ -+ i386-darwin-tdep.c i386-darwin-nat.c \ -+ i386-dicos-tdep.c \ -+ i386-linux-tdep.c i386-nat.c \ -+ i386-sol2-nat.c i386-sol2-tdep.c \ -+ i386gnu-nat.c i386gnu-tdep.c \ -+ ia64-hpux-nat.c ia64-hpux-tdep.c \ -+ ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \ -+ inf-ptrace.c inf-ttrace.c \ -+ irix5-nat.c \ -+ ia64-libunwind-tdep.c \ -+ linux-fork.c \ -+ linux-tdep.c \ -+ linux-record.c \ -+ lm32-tdep.c \ -+ m68hc11-tdep.c \ -+ m32r-tdep.c \ -+ m32r-linux-nat.c m32r-linux-tdep.c \ -+ m68k-tdep.c \ -+ m68kbsd-nat.c m68kbsd-tdep.c \ -+ m68klinux-nat.c m68klinux-tdep.c \ -+ m88k-tdep.c m88kbsd-nat.c \ -+ microblaze-tdep.c microblaze-linux-tdep.c \ -+ mingw-hdep.c \ -+ mips-linux-nat.c mips-linux-tdep.c \ -+ mips-irix-tdep.c \ -+ mips-tdep.c \ -+ mipsnbsd-nat.c mipsnbsd-tdep.c \ -+ mips64obsd-nat.c mips64obsd-tdep.c \ -+ msp430-tdep.c \ -+ nios2-tdep.c nios2-linux-tdep.c \ -+ nbsd-nat.c nbsd-tdep.c obsd-tdep.c \ -+ solib-osf.c \ -+ somread.c solib-som.c \ -+ posix-hdep.c \ -+ ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \ -+ ppcfbsd-nat.c ppcfbsd-tdep.c \ -+ ppcnbsd-nat.c ppcnbsd-tdep.c \ -+ ppcobsd-nat.c ppcobsd-tdep.c \ -+ procfs.c \ -+ ravenscar-thread.c \ -+ remote-m32r-sdi.c remote-mips.c \ -+ remote-sim.c \ -+ dcache.c \ -+ rl78-tdep.c \ -+ rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \ -+ rs6000-lynx178-tdep.c \ -+ rx-tdep.c \ -+ s390-linux-tdep.c s390-linux-nat.c \ -+ score-tdep.c \ -+ ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \ -+ sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \ -+ sol2-tdep.c \ -+ solib-irix.c solib-svr4.c \ -+ sparc-linux-nat.c sparc-linux-tdep.c \ -+ sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \ -+ sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \ -+ sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \ -+ sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \ -+ sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \ -+ sparc-ravenscar-thread.c \ -+ spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \ -+ tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \ -+ v850-tdep.c \ -+ vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \ -+ windows-nat.c windows-tdep.c \ -+ xcoffread.c \ -+ xstormy16-tdep.c \ -+ xtensa-tdep.c xtensa-config.c \ -+ xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c -+ -+# Some files need explicit build rules (due to -Werror problems) or due -+# to sub-directory fun 'n' games. -+ -+# FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral -+# errors. It turns out that that is the least of monitor.c's -+# problems. The function print_vsprintf appears to be using -+# va_arg(long) to extract CORE_ADDR parameters - something that -+# definitly will not work. "monitor.c" needs to be rewritten so that -+# it doesn't use format strings and instead uses callbacks. -+monitor.o: $(srcdir)/monitor.c -+ $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \ -+ $(COMPILE.post) $(srcdir)/monitor.c -+ $(POSTCOMPILE) -+ -+# Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually -+# checks format strings. -+printcmd.o: $(srcdir)/printcmd.c -+ $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \ -+ $(COMPILE.post) $(srcdir)/printcmd.c -+ $(POSTCOMPILE) -+ -+# ada-exp.c can appear in srcdir, for releases; or in ., for -+# development builds. -+ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi` -+ -+# Some versions of flex give output that triggers -+# -Wold-style-definition. -+ada-exp.o: ada-exp.c -+ $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_DEFS) \ -+ $(COMPILE.post) $(ADA_EXP_C) -+ $(POSTCOMPILE) -+ -+# Message files. Based on code in gcc/Makefile.in. -+ -+# Rules for generating translated message descriptions. Disabled by -+# autoconf if the tools are not available. -+ -+.SUFFIXES: .po .gmo .pox .pot -+.PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot -+ -+all-po: $(CATALOGS) -+ -+# This notation should be acceptable to all Make implementations used -+# by people who are interested in updating .po files. -+update-po: $(CATALOGS:.gmo=.pox) -+ -+# N.B. We do not attempt to copy these into $(srcdir). The snapshot -+# script does that. -+.po.gmo: -+ -test -d po || mkdir po -+ $(GMSGFMT) --statistics -o $@ $< -+ -+# The new .po has to be gone over by hand, so we deposit it into -+# build/po with a different extension. If build/po/$(PACKAGE).pot -+# exists, use it (it was just created), else use the one in srcdir. -+.po.pox: -+ -test -d po || mkdir po -+ $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \ -+ then echo po/$(PACKAGE).pot; \ -+ else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@ -+ -+# This rule has to look for .gmo modules in both srcdir and the cwd, -+# and has to check that we actually have a catalog for each language, -+# in case they weren't built or included with the distribution. -+install-po: -+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir) -+ cats="$(CATALOGS)"; for cat in $$cats; do \ -+ lang=`basename $$cat | sed 's/\.gmo$$//'`; \ -+ if [ -f $$cat ]; then :; \ -+ elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \ -+ else continue; \ -+ fi; \ -+ dir=$(localedir)/$$lang/LC_MESSAGES; \ -+ echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \ -+ echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \ -+ $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \ -+ done -+uninstall-po: -+ cats="$(CATALOGS)"; for cat in $$cats; do \ -+ lang=`basename $$cat | sed 's/\.gmo$$//'`; \ -+ if [ -f $$cat ]; then :; \ -+ elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \ -+ else continue; \ -+ fi; \ -+ dir=$(localedir)/$$lang/LC_MESSAGES; \ -+ rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \ -+ done -+# Delete po/*.gmo only if we are not building in the source directory. -+clean-po: -+ -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi -+ -+# Rule for regenerating the message template (gdb.pot). Instead of -+# forcing everyone to edit POTFILES.in, which proved impractical, this -+# rule has no dependencies and always regenerates gdb.pot. This is -+# relatively harmless since the .po files do not directly depend on -+# it. The .pot file is left in the build directory. Since GDB's -+# Makefile lacks a cannonical list of sources (missing xm, tm and nm -+# files) force this rule. -+$(PACKAGE).pot: po/$(PACKAGE).pot -+po/$(PACKAGE).pot: force -+ -test -d po || mkdir po -+ sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir) -+ -+ -+# -+# YACC/LEX dependencies -+# -+# LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't -+# exist in srcdir, then compiled in objdir to LANG-exp.o. If we -+# said LANG-exp.c rather than ./c-exp.c some makes would -+# sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus -+# decls for malloc/realloc/free which conflict with everything else. -+# Strictly speaking c-exp.c should therefore depend on -+# Makefile.in, but that was a pretty big annoyance. -+ -+.SUFFIXES: .y .l -+.y.c: -+ rm -f $@ $@.tmp -+ $(SHELL) $(YLWRAP) $< y.tab.c $@ -- $(YACC) $(YFLAGS) && mv $@ $@.tmp \ -+ || (rm -f $@; false) -+ sed -e '/extern.*malloc/d' \ -+ -e '/extern.*realloc/d' \ -+ -e '/extern.*free/d' \ -+ -e '/include.*malloc.h/d' \ -+ -e 's/\([^x]\)malloc/\1xmalloc/g' \ -+ -e 's/\([^x]\)realloc/\1xrealloc/g' \ -+ -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \ -+ -e 's/\([ \t;,(]\)free$$/\1xfree/g' \ -+ -e '/^#line.*y.tab.c/d' \ -+ -e "s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \ -+ < $@.tmp > $@ -+ rm -f $@.tmp -+.l.c: -+ if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \ -+ $(FLEX) -o$@ $< && \ -+ rm -f $@.new && \ -+ sed -e '/extern.*malloc/d' \ -+ -e '/extern.*realloc/d' \ -+ -e '/extern.*free/d' \ -+ -e '/include.*malloc.h/d' \ -+ -e 's/\([^x]\)malloc/\1xmalloc/g' \ -+ -e 's/\([^x]\)realloc/\1xrealloc/g' \ -+ -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \ -+ -e 's/\([ \t;,(]\)free$$/\1xfree/g' \ -+ -e 's/yy_flex_xrealloc/yyxrealloc/g' \ -+ < $@ > $@.new && \ -+ rm -f $@ && \ -+ mv $@.new $@; \ -+ elif [ -f $@ ]; then \ -+ echo "Warning: $*.c older than $*.l and flex not available."; \ -+ else \ -+ echo "$@ missing and flex not available."; \ -+ false; \ -+ fi -+ -+.PRECIOUS: ada-lex.c -+ -+# XML rules -+ -+xml-builtin.c: stamp-xml; @true -+stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES) -+ rm -f xml-builtin.tmp -+ AWK="$(AWK)" \ -+ $(SHELL) $(srcdir)/features/feature_to_c.sh \ -+ xml-builtin.tmp $(XMLFILES) -+ $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c -+ echo stamp > stamp-xml -+ -+.PRECIOUS: xml-builtin.c -+ -+# -+# gdb/cli/ dependencies -+# -+# Need to explicitly specify the compile rule as make will do nothing -+# or try to compile the object file into the sub-directory. -+ -+cli-cmds.o: $(srcdir)/cli/cli-cmds.c -+ $(COMPILE) $(srcdir)/cli/cli-cmds.c -+ $(POSTCOMPILE) -+ -+cli-decode.o: $(srcdir)/cli/cli-decode.c -+ $(COMPILE) $(srcdir)/cli/cli-decode.c -+ $(POSTCOMPILE) -+ -+cli-dump.o: $(srcdir)/cli/cli-dump.c -+ $(COMPILE) $(srcdir)/cli/cli-dump.c -+ $(POSTCOMPILE) -+ -+cli-interp.o: $(srcdir)/cli/cli-interp.c -+ $(COMPILE) $(srcdir)/cli/cli-interp.c -+ $(POSTCOMPILE) -+ -+cli-logging.o: $(srcdir)/cli/cli-logging.c -+ $(COMPILE) $(srcdir)/cli/cli-logging.c -+ $(POSTCOMPILE) -+ -+cli-script.o: $(srcdir)/cli/cli-script.c -+ $(COMPILE) $(srcdir)/cli/cli-script.c -+ $(POSTCOMPILE) -+ -+cli-setshow.o: $(srcdir)/cli/cli-setshow.c -+ $(COMPILE) $(srcdir)/cli/cli-setshow.c -+ $(POSTCOMPILE) -+ -+cli-utils.o: $(srcdir)/cli/cli-utils.c -+ $(COMPILE) $(srcdir)/cli/cli-utils.c -+ $(POSTCOMPILE) -+ -+ -+# -+# GDBTK sub-directory -+# -+# Need to explicitly specify the compile rule as make will do nothing -+# or try to compile the object file into the mi directory. -+ -+all-gdbtk: insight$(EXEEXT) -+ -+install-gdbtk: -+ transformed_name=`t='$(program_transform_name)'; \ -+ echo insight | sed -e $$t` ; \ -+ if test "x$$transformed_name" = x; then \ -+ transformed_name=insight ; \ -+ else \ -+ true ; \ -+ fi ; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \ -+ $(INSTALL_PROGRAM) insight$(EXEEXT) \ -+ $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs \ -+ $(DESTDIR)$(GDBTK_LIBRARY) ; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs \ -+ $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \ -+ $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \ -+ $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs \ -+ $(DESTDIR)$(GDBTK_LIBRARY)/images \ -+ $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \ -+ $(SHELL) $(srcdir)/../mkinstalldirs \ -+ $(DESTDIR)$(GDBTK_LIBRARY)/help \ -+ $(DESTDIR)$(GDBTK_LIBRARY)/help/images \ -+ $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \ -+ cd $(srcdir)/gdbtk/library ; \ -+ for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \ -+ do \ -+ $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \ -+ done ; -+ -+uninstall-gdbtk: -+ transformed_name=`t='$(program_transform_name)'; \ -+ echo insight | sed -e $$t` ; \ -+ if test "x$$transformed_name" = x; then \ -+ transformed_name=insight ; \ -+ else \ -+ true ; \ -+ fi ; \ -+ rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \ -+ rm -rf $(DESTDIR)$(GDBTK_LIBRARY) -+ -+clean-gdbtk: -+ rm -f insight$(EXEEXT) -+ -+# Removing the old gdb first works better if it is running, at least on SunOS. -+insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \ -+ $(CDEPS) $(TDEPLIBS) -+ rm -f insight$(EXEEXT) -+ $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \ -+ -o insight$(EXEEXT) gdbtk-main.o libgdb.a \ -+ $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES) -+ -+gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico -+ $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o -+ -+all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \ -+ $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \ -+ $(GDBTK_CFLAGS) \ -+ -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \ -+ -DSRC_DIR=\"$(GDBTK_SRC_DIR)\" -+ -+gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c -+ $(POSTCOMPILE) -+ -+gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c -+ $(POSTCOMPILE) -+ -+gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c -+ $(POSTCOMPILE) -+ -+gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c -+ $(POSTCOMPILE) -+ -+gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c -+ $(POSTCOMPILE) -+ -+gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c -+ $(POSTCOMPILE) -+ -+gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c -+ $(POSTCOMPILE) -+ -+gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c -+ $(POSTCOMPILE) -+ -+gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c -+ $(POSTCOMPILE) -+ -+gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c -+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c -+ $(POSTCOMPILE) -+ -+ -+# -+# gdb/mi/ dependencies -+# -+# Need to explicitly specify the compile rule as make will do nothing -+# or try to compile the object file into the sub-directory. -+ -+mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-break.c -+ $(POSTCOMPILE) -+ -+mi-cmd-catch.o: $(srcdir)/mi/mi-cmd-catch.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-catch.c -+ $(POSTCOMPILE) -+ -+mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c -+ $(POSTCOMPILE) -+ -+mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-env.c -+ $(POSTCOMPILE) -+ -+mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-file.c -+ $(POSTCOMPILE) -+ -+mi-cmd-info.o: $(srcdir)/mi/mi-cmd-info.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-info.c -+ $(POSTCOMPILE) -+ -+mi-cmds.o: $(srcdir)/mi/mi-cmds.c -+ $(COMPILE) $(srcdir)/mi/mi-cmds.c -+ $(POSTCOMPILE) -+ -+mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c -+ $(POSTCOMPILE) -+ -+mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-target.c -+ $(POSTCOMPILE) -+ -+mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c -+ $(COMPILE) $(srcdir)/mi/mi-cmd-var.c -+ $(POSTCOMPILE) -+ -+mi-console.o: $(srcdir)/mi/mi-console.c -+ $(COMPILE) $(srcdir)/mi/mi-console.c -+ $(POSTCOMPILE) -+ -+mi-getopt.o: $(srcdir)/mi/mi-getopt.c -+ $(COMPILE) $(srcdir)/mi/mi-getopt.c -+ $(POSTCOMPILE) -+ -+mi-interp.o: $(srcdir)/mi/mi-interp.c -+ $(COMPILE) $(srcdir)/mi/mi-interp.c -+ $(POSTCOMPILE) -+ -+mi-main.o: $(srcdir)/mi/mi-main.c -+ $(COMPILE) $(srcdir)/mi/mi-main.c -+ $(POSTCOMPILE) -+ -+mi-out.o: $(srcdir)/mi/mi-out.c -+ $(COMPILE) $(srcdir)/mi/mi-out.c -+ $(POSTCOMPILE) -+ -+mi-parse.o: $(srcdir)/mi/mi-parse.c -+ $(COMPILE) $(srcdir)/mi/mi-parse.c -+ $(POSTCOMPILE) -+ -+mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c -+ $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c -+ $(POSTCOMPILE) -+ -+mi-common.o: $(srcdir)/mi/mi-common.c -+ $(COMPILE) $(srcdir)/mi/mi-common.c -+ $(POSTCOMPILE) -+ -+# gdb/common/ dependencies -+# -+# Need to explicitly specify the compile rule as make will do nothing -+# or try to compile the object file into the sub-directory. -+ -+signals.o: $(srcdir)/common/signals.c -+ $(COMPILE) $(srcdir)/common/signals.c -+ $(POSTCOMPILE) -+ -+common-utils.o: ${srcdir}/common/common-utils.c -+ $(COMPILE) $(srcdir)/common/common-utils.c -+ $(POSTCOMPILE) -+ -+gdb_vecs.o: ${srcdir}/common/gdb_vecs.c -+ $(COMPILE) $(srcdir)/common/gdb_vecs.c -+ $(POSTCOMPILE) -+ -+xml-utils.o: ${srcdir}/common/xml-utils.c -+ $(COMPILE) $(srcdir)/common/xml-utils.c -+ $(POSTCOMPILE) -+ -+ptid.o: ${srcdir}/common/ptid.c -+ $(COMPILE) $(srcdir)/common/ptid.c -+ $(POSTCOMPILE) -+ -+buffer.o: ${srcdir}/common/buffer.c -+ $(COMPILE) $(srcdir)/common/buffer.c -+ $(POSTCOMPILE) -+ -+filestuff.o: $(srcdir)/common/filestuff.c -+ $(COMPILE) $(srcdir)/common/filestuff.c -+ $(POSTCOMPILE) -+ -+format.o: ${srcdir}/common/format.c -+ $(COMPILE) $(srcdir)/common/format.c -+ $(POSTCOMPILE) -+ -+linux-osdata.o: ${srcdir}/common/linux-osdata.c -+ $(COMPILE) $(srcdir)/common/linux-osdata.c -+ $(POSTCOMPILE) -+ -+linux-procfs.o: $(srcdir)/common/linux-procfs.c -+ $(COMPILE) $(srcdir)/common/linux-procfs.c -+ $(POSTCOMPILE) -+ -+linux-ptrace.o: $(srcdir)/common/linux-ptrace.c -+ $(COMPILE) $(srcdir)/common/linux-ptrace.c -+ $(POSTCOMPILE) -+ -+common-agent.o: $(srcdir)/common/agent.c -+ $(COMPILE) $(srcdir)/common/agent.c -+ $(POSTCOMPILE) -+ -+vec.o: ${srcdir}/common/vec.c -+ $(COMPILE) $(srcdir)/common/vec.c -+ $(POSTCOMPILE) -+ -+linux-btrace.o: ${srcdir}/common/linux-btrace.c -+ $(COMPILE) $(srcdir)/common/linux-btrace.c -+ $(POSTCOMPILE) -+ -+mips-linux-watch.o: ${srcdir}/common/mips-linux-watch.c -+ $(COMPILE) $(srcdir)/common/mips-linux-watch.c -+ $(POSTCOMPILE) -+ -+# -+# gdb/target/ dependencies -+# -+# Need to explicitly specify the compile rule as make will do nothing -+# or try to compile the object file into the sub-directory. -+ -+waitstatus.o: ${srcdir}/target/waitstatus.c -+ $(COMPILE) $(srcdir)/target/waitstatus.c -+ $(POSTCOMPILE) -+ -+# gdb/nat/ dependencies -+# -+# Need to explicitly specify the compile rule as make will do nothing -+# or try to compile the object file into the sub-directory. -+ -+linux-waitpid.o: ${srcdir}/nat/linux-waitpid.c -+ $(COMPILE) $(srcdir)/nat/linux-waitpid.c -+ $(POSTCOMPILE) -+ -+# -+# gdb/tui/ dependencies -+# -+# Need to explicitly specify the compile rule as make will do nothing -+# or try to compile the object file into the sub-directory. -+ -+tui.o: $(srcdir)/tui/tui.c -+ $(COMPILE) $(srcdir)/tui/tui.c -+ $(POSTCOMPILE) -+ -+tui-command.o: $(srcdir)/tui/tui-command.c -+ $(COMPILE) $(srcdir)/tui/tui-command.c -+ $(POSTCOMPILE) -+ -+tui-data.o: $(srcdir)/tui/tui-data.c -+ $(COMPILE) $(srcdir)/tui/tui-data.c -+ $(POSTCOMPILE) -+ -+tui-disasm.o: $(srcdir)/tui/tui-disasm.c -+ $(COMPILE) $(srcdir)/tui/tui-disasm.c -+ $(POSTCOMPILE) -+ -+tui-file.o: $(srcdir)/tui/tui-file.c -+ $(COMPILE) $(srcdir)/tui/tui-file.c -+ $(POSTCOMPILE) -+ -+tui-hooks.o: $(srcdir)/tui/tui-hooks.c -+ $(COMPILE) $(srcdir)/tui/tui-hooks.c -+ $(POSTCOMPILE) -+ -+tui-interp.o: $(srcdir)/tui/tui-interp.c -+ $(COMPILE) $(srcdir)/tui/tui-interp.c -+ $(POSTCOMPILE) -+ -+tui-io.o: $(srcdir)/tui/tui-io.c -+ $(COMPILE) $(srcdir)/tui/tui-io.c -+ $(POSTCOMPILE) -+ -+tui-layout.o: $(srcdir)/tui/tui-layout.c -+ $(COMPILE) $(srcdir)/tui/tui-layout.c -+ $(POSTCOMPILE) -+ -+tui-out.o: $(srcdir)/tui/tui-out.c -+ $(COMPILE) $(srcdir)/tui/tui-out.c -+ $(POSTCOMPILE) -+ -+tui-regs.o: $(srcdir)/tui/tui-regs.c -+ $(COMPILE) $(srcdir)/tui/tui-regs.c -+ $(POSTCOMPILE) -+ -+tui-source.o: $(srcdir)/tui/tui-source.c -+ $(COMPILE) $(srcdir)/tui/tui-source.c -+ $(POSTCOMPILE) -+ -+tui-stack.o: $(srcdir)/tui/tui-stack.c -+ $(COMPILE) $(srcdir)/tui/tui-stack.c -+ $(POSTCOMPILE) -+ -+tui-win.o: $(srcdir)/tui/tui-win.c -+ $(COMPILE) $(srcdir)/tui/tui-win.c -+ $(POSTCOMPILE) -+ -+tui-windata.o: $(srcdir)/tui/tui-windata.c -+ $(COMPILE) $(srcdir)/tui/tui-windata.c -+ $(POSTCOMPILE) -+ -+tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c -+ $(COMPILE) $(srcdir)/tui/tui-wingeneral.c -+ $(POSTCOMPILE) -+ -+tui-winsource.o: $(srcdir)/tui/tui-winsource.c -+ $(COMPILE) $(srcdir)/tui/tui-winsource.c -+ $(POSTCOMPILE) -+ -+# -+# gdb/python/ dependencies -+# -+# Need to explicitly specify the compile rule as make will do nothing -+# or try to compile the object file into the sub-directory. -+ -+# Flags needed to compile Python code -+PYTHON_CFLAGS=@PYTHON_CFLAGS@ -+ -+python.o: $(srcdir)/python/python.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c -+ $(POSTCOMPILE) -+ -+py-arch.o: $(srcdir)/python/py-arch.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-arch.c -+ $(POSTCOMPILE) -+ -+py-auto-load.o: $(srcdir)/python/py-auto-load.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-auto-load.c -+ $(POSTCOMPILE) -+ -+py-block.o: $(srcdir)/python/py-block.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c -+ $(POSTCOMPILE) -+ -+py-bpevent.o: $(srcdir)/python/py-bpevent.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-bpevent.c -+ $(POSTCOMPILE) -+ -+py-breakpoint.o: $(srcdir)/python/py-breakpoint.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c -+ $(POSTCOMPILE) -+ -+py-cmd.o: $(srcdir)/python/py-cmd.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c -+ $(POSTCOMPILE) -+ -+py-continueevent.o: $(srcdir)/python/py-continueevent.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-continueevent.c -+ $(POSTCOMPILE) -+ -+py-event.o: $(srcdir)/python/py-event.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-event.c -+ $(POSTCOMPILE) -+ -+py-evtregistry.o: $(srcdir)/python/py-evtregistry.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evtregistry.c -+ $(POSTCOMPILE) -+ -+py-evts.o: $(srcdir)/python/py-evts.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evts.c -+ $(POSTCOMPILE) -+ -+py-exitedevent.o: $(srcdir)/python/py-exitedevent.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-exitedevent.c -+ $(POSTCOMPILE) -+ -+py-finishbreakpoint.o: $(srcdir)/python/py-finishbreakpoint.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-finishbreakpoint.c -+ $(POSTCOMPILE) -+ -+py-frame.o: $(srcdir)/python/py-frame.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c -+ $(POSTCOMPILE) -+ -+py-framefilter.o: $(srcdir)/python/py-framefilter.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-framefilter.c -+ $(POSTCOMPILE) -+ -+py-function.o: $(srcdir)/python/py-function.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c -+ $(POSTCOMPILE) -+ -+py-gdb-readline.o: $(srcdir)/python/py-gdb-readline.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-gdb-readline.c -+ $(POSTCOMPILE) -+ -+py-inferior.o: $(srcdir)/python/py-inferior.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-inferior.c -+ $(POSTCOMPILE) -+ -+py-infthread.o: $(srcdir)/python/py-infthread.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infthread.c -+ $(POSTCOMPILE) -+ -+py-lazy-string.o: $(srcdir)/python/py-lazy-string.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c -+ $(POSTCOMPILE) -+ -+py-linetable.o: $(srcdir)/python/py-linetable.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-linetable.c -+ $(POSTCOMPILE) -+ -+py-newobjfileevent.o: $(srcdir)/python/py-newobjfileevent.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-newobjfileevent.c -+ $(POSTCOMPILE) -+ -+py-objfile.o: $(srcdir)/python/py-objfile.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c -+ $(POSTCOMPILE) -+ -+py-param.o: $(srcdir)/python/py-param.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-param.c -+ $(POSTCOMPILE) -+ -+py-prettyprint.o: $(srcdir)/python/py-prettyprint.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c -+ $(POSTCOMPILE) -+ -+py-progspace.o: $(srcdir)/python/py-progspace.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-progspace.c -+ $(POSTCOMPILE) -+ -+py-signalevent.o: $(srcdir)/python/py-signalevent.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-signalevent.c -+ $(POSTCOMPILE) -+ -+py-stopevent.o: $(srcdir)/python/py-stopevent.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-stopevent.c -+ $(POSTCOMPILE) -+ -+py-symbol.o: $(srcdir)/python/py-symbol.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c -+ $(POSTCOMPILE) -+ -+py-symtab.o: $(srcdir)/python/py-symtab.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c -+ $(POSTCOMPILE) -+ -+py-threadevent.o: $(srcdir)/python/py-threadevent.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-threadevent.c -+ $(POSTCOMPILE) -+ -+py-type.o: $(srcdir)/python/py-type.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c -+ $(POSTCOMPILE) -+ -+py-utils.o: $(srcdir)/python/py-utils.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c -+ $(POSTCOMPILE) -+ -+py-value.o: $(srcdir)/python/py-value.c -+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c -+ $(POSTCOMPILE) -+ -+# -+# Dependency tracking. Most of this is conditional on GNU Make being -+# found by configure; if GNU Make is not found, we fall back to a -+# simpler scheme. -+# -+ -+@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3) -+# Note that we put the dependencies into a .Tpo file, then move them -+# into place if the compile succeeds. We need this because gcc does -+# not atomically write the dependency output file. -+@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \ -+@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo -+@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \ -+@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po -+@GMAKE_TRUE@else -+@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \ -+@GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC) -+# depcomp handles atomicity for us, so we don't need a postcompile -+# step. -+@GMAKE_TRUE@override POSTCOMPILE = -+@GMAKE_TRUE@endif -+ -+# A list of all the objects we might care about in this build, for -+# dependency tracking. -+all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \ -+ test-cp-name-parser.o -+ -+# Ensure that generated files are created early. Use order-only -+# dependencies if available. They require GNU make 3.80 or newer, -+# and the .VARIABLES variable was introduced at the same time. -+@GMAKE_TRUE@ifdef .VARIABLES -+@GMAKE_TRUE@$(all_object_files): | $(generated_files) -+@GMAKE_TRUE@else -+$(all_object_files) : $(generated_files) -+@GMAKE_TRUE@endif -+ -+# Dependencies. -+@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files)) -+ -+### end of the gdb Makefile.in. -diff -Nbaur gdb-7.7/sim/common/Make-common.in gdb-7.7-arm/sim/common/Make-common.in ---- gdb-7.7/sim/common/Make-common.in 2014-01-08 09:23:36.000000000 +0000 -+++ gdb-7.7-arm/sim/common/Make-common.in 2014-02-16 19:43:34.000000000 +0000 -@@ -415,10 +415,8 @@ - # Note that we put the dependencies into a .Tpo file, then move them - # into place if the compile succeeds. We need this because gcc does - # not atomically write the dependency output file. --@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \ --@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo --@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \ --@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po -+@GMAKE_TRUE@override COMPILE.post = -c -o $@ -+@GMAKE_TRUE@override POSTCOMPILE = - @GMAKE_TRUE@else - @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \ - @GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC) -diff -Nbaur gdb-7.7/sim/common/Make-common.in.orig gdb-7.7-arm/sim/common/Make-common.in.orig ---- gdb-7.7/sim/common/Make-common.in.orig 1970-01-01 01:00:00.000000000 +0100 -+++ gdb-7.7-arm/sim/common/Make-common.in.orig 2014-01-08 09:23:36.000000000 +0000 -@@ -0,0 +1,625 @@ -+# Makefile fragment for common parts of all simulators. -+# Copyright 1997-2014 Free Software Foundation, Inc. -+# Contributed by Cygnus Support. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 3 of the License, or -+# (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program. If not, see . -+ -+# This Makefile fragment consists of two separate parts. -+# They are merged into the final Makefile at points denoted by -+# "## COMMON_PRE_CONFIG_FRAG" and "## COMMON_POST_CONFIG_FRAG". -+# -+# The target Makefile should look like: -+# -+#># Copyright blah blah -+#> -+#>## COMMON_PRE_CONFIG_FRAG -+#> -+#># Any overrides necessary for the SIM_FOO config vars. -+#>SIM_FOO = ... -+#> -+#>## COMMON_POST_CONFIG_FRAG -+#> -+#># Rules to build target specific .o's. -+ -+## COMMON_PRE_CONFIG_FRAG -+ -+VPATH = @srcdir@:$(srccom) -+srcdir = @srcdir@ -+srccom = $(srcdir)/../common -+srcroot = $(srcdir)/../.. -+srcsim = $(srcdir)/.. -+ -+prefix = @prefix@ -+exec_prefix = @exec_prefix@ -+ -+host_alias = @host_alias@ -+target_alias = @target_alias@ -+program_transform_name = @program_transform_name@ -+bindir = @bindir@ -+ -+libdir = @libdir@ -+tooldir = $(libdir)/$(target_alias) -+ -+datadir = @datadir@ -+datarootdir = @datarootdir@ -+mandir = @mandir@ -+man1dir = $(mandir)/man1 -+infodir = @infodir@ -+includedir = @includedir@ -+ -+lt_cv_dlopen_libs = @lt_cv_dlopen_libs@ -+# This can be referenced by the gettext configuration code. -+top_builddir = .. -+ -+EXEEXT = @EXEEXT@ -+SHELL = @SHELL@ -+ -+INSTALL = @INSTALL@ -+INSTALL_PROGRAM = @INSTALL_PROGRAM@ -+INSTALL_DATA = @INSTALL_DATA@ -+ -+CC = @CC@ -+CC_FOR_BUILD = @CC_FOR_BUILD@ -+CFLAGS = @CFLAGS@ -+SIM_BSWAP = @sim_bswap@ -+SIM_CFLAGS = @sim_cflags@ -+SIM_DEBUG = @sim_debug@ -+SIM_TRACE = @sim_trace@ -+SIM_PROFILE = @sim_profile@ -+ -+SIM_ASSERT = @sim_assert@ -+SIM_ALIGNMENT = @sim_alignment@ -+SIM_BITSIZE = @sim_bitsize@ -+SIM_DEFAULT_MODEL = @sim_default_model@ -+SIM_ENDIAN = @sim_endian@ -+SIM_ENVIRONMENT = @sim_environment@ -+SIM_FLOAT = @sim_float@ -+SIM_HW_CFLAGS = @sim_hw_cflags@ -+SIM_HW_OBJS = @sim_hw_objs@ -+SIM_HW = @sim_hw@ -+SIM_HOSTENDIAN = @sim_hostendian@ -+SIM_INLINE = @sim_inline@ -+SIM_PACKAGES = @sim_packages@ -+SIM_REGPARM = @sim_regparm@ -+SIM_RESERVED_BITS = @sim_reserved_bits@ -+SIM_SCACHE = @sim_scache@ -+SIM_SMP = @sim_smp@ -+SIM_STDCALL = @sim_stdcall@ -+SIM_XOR_ENDIAN = @sim_xor_endian@ -+WARN_CFLAGS = @WARN_CFLAGS@ -+WERROR_CFLAGS = @WERROR_CFLAGS@ -+SIM_WARN_CFLAGS = $(WARN_CFLAGS) -+SIM_WERROR_CFLAGS = $(WERROR_CFLAGS) -+ -+HDEFINES = @HDEFINES@ -+TDEFINES = -+ -+AR = @AR@ -+AR_FLAGS = rc -+RANLIB = @RANLIB@ -+MAKEINFO = makeinfo -+ -+# Dependency tracking information. -+DEPMODE = @CCDEPMODE@ -+DEPDIR = @DEPDIR@ -+depcomp = $(SHELL) $(srcroot)/depcomp -+ -+# Note that these are overridden by GNU make-specific code below if -+# GNU make is used. The overrides implement dependency tracking. -+COMPILE.pre = $(CC) -+COMPILE.post = -c -o $@ -+COMPILE = $(COMPILE.pre) $(ALL_CFLAGS) $(COMPILE.post) -+POSTCOMPILE = @true -+ -+# Each simulator's Makefile.in defines one or more of these variables -+# to override our settings as necessary. There is no need to define these -+# in the simulator's Makefile.in if one is using the default value. In fact -+# it's preferable not to. -+ -+# List of object files, less common parts. -+SIM_OBJS = -+# List of extra dependencies. -+# Generally this consists of simulator specific files included by sim-main.h. -+SIM_EXTRA_DEPS = -+# List of flags to always pass to $(CC). -+SIM_EXTRA_CFLAGS = -+# List of extra libraries to link with. -+SIM_EXTRA_LIBS = -+# List of extra program dependencies. -+SIM_EXTRA_LIBDEPS = -+# List of main object files for `run'. -+SIM_RUN_OBJS = run.o -+# Dependency of `all' to build any extra files. -+SIM_EXTRA_ALL = -+# Dependency of `install' to install any extra files. -+SIM_EXTRA_INSTALL = -+# Dependency of `clean' to clean any extra files. -+SIM_EXTRA_CLEAN = -+# Likewise `distclean' -+SIM_EXTRA_DISTCLEAN = -+ -+# Every time a new general purpose source file was added every target's -+# Makefile.in needed to be updated to include the file in SIM_OBJS. -+# This doesn't scale. -+# This variable specifies all the generic stuff common to the newer simulators. -+# Things like sim-reason.o can't go here as the cpu may provide its own -+# (though hopefully in time that won't be so). Things like sim-bits.o can go -+# here. Some files are used by all simulators (e.g. callback.o). -+# Those files are specified in LIB_OBJS below. -+ -+SIM_COMMON_HW_OBJS = \ -+ hw-alloc.o \ -+ hw-base.o \ -+ hw-device.o \ -+ hw-events.o \ -+ hw-handles.o \ -+ hw-instances.o \ -+ hw-ports.o \ -+ hw-properties.o \ -+ hw-tree.o \ -+ sim-hw.o \ -+ -+SIM_NEW_COMMON_OBJS = \ -+ sim-arange.o \ -+ sim-bits.o \ -+ sim-command.o \ -+ sim-config.o \ -+ sim-core.o \ -+ sim-endian.o \ -+ sim-events.o \ -+ sim-fpu.o \ -+ sim-io.o \ -+ sim-info.o \ -+ sim-load.o \ -+ sim-memopt.o \ -+ sim-module.o \ -+ sim-options.o \ -+ sim-profile.o \ -+ sim-signal.o \ -+ sim-trace.o \ -+ sim-utils.o \ -+ sim-watch.o \ -+ \ -+ $(SIM_HW_OBJS) \ -+ -+# cgen-sim.h and the headers it includes -+CGEN_SIM_DEPS = \ -+ $(srccom)/cgen-sim.h \ -+ $(srccom)/cgen-defs.h \ -+ $(srccom)/cgen-scache.h \ -+ $(srccom)/cgen-fpu.h \ -+ $(srccom)/cgen-par.h \ -+ $(srccom)/cgen-cpu.h \ -+ $(srccom)/cgen-trace.h \ -+ cpuall.h -+ -+# Add this to SIM_EXTRA_DEPS. -+CGEN_INCLUDE_DEPS = \ -+ $(CGEN_SIM_DEPS) \ -+ $(srccom)/cgen-engine.h \ -+ $(srccom)/cgen-types.h \ -+ $(srcdir)/../../include/opcode/cgen.h -+ -+## End COMMON_PRE_CONFIG_FRAG -+ -+## COMMON_POST_CONFIG_FRAG -+ -+CONFIG_CFLAGS = \ -+ @DEFS@ \ -+ $(SIM_CFLAGS) \ -+ $(SIM_DEBUG) \ -+ $(SIM_DEFAULT_MODEL) \ -+ $(SIM_TRACE) \ -+ $(SIM_PROFILE) \ -+ $(SIM_BSWAP) \ -+ $(SIM_ASSERT) \ -+ $(SIM_ALIGNMENT) \ -+ $(SIM_BITSIZE) \ -+ $(SIM_ENDIAN) \ -+ $(SIM_ENVIRONMENT) \ -+ $(SIM_FLOAT) \ -+ $(SIM_HW_CFLAGS) \ -+ $(SIM_HOSTENDIAN) \ -+ $(SIM_INLINE) \ -+ $(SIM_PACKAGES) \ -+ $(SIM_REGPARM) \ -+ $(SIM_RESERVED_BITS) \ -+ $(SIM_SCACHE) \ -+ $(SIM_SMP) \ -+ $(SIM_STDCALL) \ -+ $(SIM_WARN_CFLAGS) \ -+ $(SIM_WERROR_CFLAGS) \ -+ $(SIM_XOR_ENDIAN) \ -+ $(SIM_HARDWARE) \ -+ $(SIM_EXTRA_CFLAGS) \ -+ $(HDEFINES) $(TDEFINES) -+CSEARCH = -I. -I$(srcdir) -I../common -I$(srccom) \ -+ -I../../include -I$(srcroot)/include \ -+ -I../../bfd -I$(srcroot)/bfd \ -+ -I../../opcodes -I$(srcroot)/opcodes \ -+ @INCINTL@ -+ALL_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH) $(CFLAGS) -+BUILD_CFLAGS = -g -O $(CSEARCH) -+ -+COMMON_DEP_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH) -+ -+LIBIBERTY_LIB = ../../libiberty/libiberty.a -+BFD_LIB = ../../bfd/libbfd.a -+@PLUGINS_TRUE@LIBDL = @lt_cv_dlopen_libs@ -+OPCODES_LIB = ../../opcodes/libopcodes.a -+LIBINTL = @LIBINTL@ -+LIBINTL_DEP = @LIBINTL_DEP@ -+CONFIG_LIBS = @LIBS@ -+LIBDEPS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL_DEP) $(LIBIBERTY_LIB) \ -+ $(SIM_EXTRA_LIBDEPS) -+EXTRA_LIBS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL) $(LIBIBERTY_LIB) \ -+ $(CONFIG_LIBS) $(SIM_EXTRA_LIBS) $(LIBDL) -+ -+LIB_OBJS = callback.o syscall.o targ-map.o version.o $(SIM_OBJS) -+ -+RUNTESTFLAGS = -+ -+callback_h = $(srcroot)/include/gdb/callback.h -+remote_sim_h = $(srcroot)/include/gdb/remote-sim.h -+ -+all: $(SIM_EXTRA_ALL) libsim.a run$(EXEEXT) .gdbinit -+ -+libsim.a: $(LIB_OBJS) -+ rm -f libsim.a -+ $(AR) $(AR_FLAGS) libsim.a $(LIB_OBJS) -+ $(RANLIB) libsim.a -+ -+run$(EXEEXT): $(SIM_RUN_OBJS) libsim.a $(LIBDEPS) -+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o run$(EXEEXT) \ -+ $(SIM_RUN_OBJS) libsim.a $(EXTRA_LIBS) -+ -+# FIXME: Ideally, callback.o and friends live in a library outside of -+# both the gdb and simulator source trees (e.g. devo/remote. Not -+# devo/libremote because this directory would contain more than just -+# a library). -+ -+gentmap: Makefile $(srccom)/gentmap.c targ-vals.def -+ $(CC_FOR_BUILD) $(srccom)/gentmap.c -o gentmap $(BUILD_CFLAGS) $(NL_TARGET) -+ -+targ-vals.h targ-map.c: stamp-tvals -+stamp-tvals: gentmap -+ rm -f tmp-tvals.h tmp-tmap.c -+ ./gentmap -h >tmp-tvals.h -+ $(SHELL) $(srcroot)/move-if-change tmp-tvals.h targ-vals.h -+ ./gentmap -c >tmp-tmap.c -+ $(SHELL) $(srcroot)/move-if-change tmp-tmap.c targ-map.c -+ touch stamp-tvals -+ -+version.c: Makefile $(srccom)/create-version.sh ../../bfd/version.h ../../gdb/version.in -+ $(SHELL) $(srccom)/create-version.sh $(srcsim) $(host_alias) $(target_alias) version.c -+ -+# -+# Rules for building sim-* components. Triggered by listing the corresponding -+# .o file in the list of simulator targets. -+# -+ -+sim_main_headers = \ -+ sim-main.h \ -+ $(sim-assert_h) \ -+ $(sim-base_h) \ -+ $(sim-cpu_h) \ -+ $(sim-engine_h) \ -+ $(sim-events_h) \ -+ $(sim-memopt_h) \ -+ $(sim-model_h) \ -+ $(sim-module_h) \ -+ $(sim-profile_h) \ -+ $(sim-trace_h) \ -+ $(sim-watch_h) \ -+ $(sim-basics_h) \ -+ $(SIM_EXTRA_DEPS) -+ -+# Exported version of sim_main_headers. -+SIM_MAIN_DEPS = \ -+ $(sim_main_headers) -+ -+sim-alu_h = $(srccom)/sim-alu.h -+sim-arange_h = $(srccom)/sim-arange.h \ -+ $(srccom)/sim-arange.c -+sim-assert_h = $(srccom)/sim-assert.h -+sim-base_h = $(srccom)/sim-base.h \ -+ $(sim-module_h) \ -+ $(sim-trace_h) \ -+ $(sim-core_h) \ -+ $(sim-events_h) \ -+ $(sim-profile_h) \ -+ $(sim-model_h) \ -+ $(sim-io_h) \ -+ $(sim-engine_h) \ -+ $(sim-watch_h) \ -+ $(sim-memopt_h) \ -+ $(sim-cpu_h) -+sim-basics_h = $(srccom)/sim-basics.h \ -+ ../common/cconfig.h \ -+ tconfig.h \ -+ $(sim-config_h) \ -+ $(callback_h) \ -+ $(sim-inline_h) \ -+ $(sim-types_h) \ -+ $(sim-bits_h) \ -+ $(sim-endian_h) \ -+ $(sim-signal_h) \ -+ $(sim-arange_h) \ -+ $(sim-utils_h) -+sim-bits_h = $(srccom)/sim-bits.h \ -+ $(srccom)/sim-bits.c -+sim-config_h = $(srccom)/sim-config.h -+sim-core_h = $(srccom)/sim-core.h -+sim-cpu_h = $(srccom)/sim-cpu.h -+sim-endian_h = $(srccom)/sim-endian.h \ -+ $(srccom)/sim-endian.c -+sim-engine_h = $(srccom)/sim-engine.h -+sim-events_h = $(srccom)/sim-events.h -+sim-fpu_h = $(srccom)/sim-fpu.h -+sim-hw_h = $(srccom)/sim-hw.h -+sim-inline_h = $(srccom)/sim-inline.h -+sim-io_h = $(srccom)/sim-io.h -+sim-memopt_h = $(srccom)/sim-memopt.h -+sim-model_h = $(srccom)/sim-model.h -+sim-module_h = $(srccom)/sim-module.h -+sim-n-bits_h = $(srccom)/sim-n-bits.h -+sim-n-core_h = $(srccom)/sim-n-core.h -+sim-n-endian_h = $(srccom)/sim-n-endian.h -+sim-options_h = $(srccom)/sim-options.h -+sim-profile_h = $(srccom)/sim-profile.h -+sim-signal_h = $(srccom)/sim-signal.h -+sim-trace_h = $(srccom)/sim-trace.h -+sim-types_h = $(srccom)/sim-types.h -+sim-utils_h = $(srccom)/sim-utils.h -+sim-watch_h = $(srccom)/sim-watch.h -+ -+hw-alloc_h = $(srccom)/hw-alloc.h -+hw-base_h = $(srccom)/hw-base.h -+hw-device_h = $(srccom)/hw-device.h -+hw-events_h = $(srccom)/hw-events.h -+hw-handles_h = $(srccom)/hw-handles.h -+hw-instances_h = $(srccom)/hw-instances.h -+hw-ports_h = $(srccom)/hw-ports.h -+hw-properties_h = $(srccom)/hw-properties.h -+hw-tree_h = $(srccom)/hw-tree.h -+ -+hw_main_headers = \ -+ $(srccom)/hw-main.h \ -+ $(hw-alloc_h) \ -+ $(hw-base_h) \ -+ $(hw-device_h) \ -+ $(hw-events_h) \ -+ $(hw-instances_h) \ -+ $(hw-handles_h) \ -+ $(hw-ports_h) \ -+ $(hw-properties_h) \ -+ -+# -+# Dependency tracking. Most of this is conditional on GNU Make being -+# found by configure; if GNU Make is not found, we fall back to a -+# simpler scheme. -+# -+ -+@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3) -+# Note that we put the dependencies into a .Tpo file, then move them -+# into place if the compile succeeds. We need this because gcc does -+# not atomically write the dependency output file. -+@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \ -+@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo -+@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \ -+@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po -+@GMAKE_TRUE@else -+@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \ -+@GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC) -+# depcomp handles atomicity for us, so we don't need a postcompile -+# step. -+@GMAKE_TRUE@override POSTCOMPILE = -+@GMAKE_TRUE@endif -+ -+all_object_files = $(LIB_OBJS) $(SIM_RUN_OBJS) -+generated_files = \ -+ $(SIM_EXTRA_DEPS) \ -+ hw-config.h \ -+ targ-map.c \ -+ targ-vals.h \ -+ version.c -+ -+# Ensure that generated files are created early. Use order-only -+# dependencies if available. They require GNU make 3.80 or newer, -+# and the .VARIABLES variable was introduced at the same time. -+@GMAKE_TRUE@ifdef .VARIABLES -+@GMAKE_TRUE@$(all_object_files): | $(generated_files) -+@GMAKE_TRUE@else -+$(all_object_files) : $(generated_files) -+@GMAKE_TRUE@endif -+ -+# Dependencies. -+@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files)) -+ -+BUILT_SRC_FROM_COMMON= \ -+ sim-inline.c -+ -+sim-inline.c: $(srccom)/sim-inline.c -+ rm -f $@ tmp-$@ -+ echo "# 1 \"$(srccom)/$@\"" > tmp-$@ -+ cat $(srccom)/$@ >> tmp-$@ -+ $(SHELL) $(srcdir)/../../move-if-change tmp-$@ $@ -+ -+# FIXME This is one very simple-minded way of generating the file hw-config.h -+hw-config.h: Makefile.in $(srccom)/Make-common.in config.status Makefile -+ rm -f tmp-hw.h -+ echo "/* generated by Makefile */" > tmp-hw.h -+ sim_hw="$(SIM_HW)"; \ -+ for hw in $$sim_hw ; do \ -+ echo "extern const struct hw_descriptor dv_$${hw}_descriptor[];" ; \ -+ done >> tmp-hw.h -+ echo "const struct hw_descriptor *hw_descriptors[] = {" >> tmp-hw.h -+ sim_hw="$(SIM_HW)"; \ -+ for hw in $$sim_hw ; do \ -+ echo " dv_$${hw}_descriptor," ; \ -+ done >> tmp-hw.h -+ echo " NULL," >> tmp-hw.h -+ echo "};" >> tmp-hw.h -+ mv tmp-hw.h hw-config.h -+ -+test-hw-events: $(srccom)/hw-events.c libsim.a -+ $(CC) $(ALL_CFLAGS) -DMAIN -o test-hw-events$(EXEEXT) \ -+ $(srccom)/hw-events.c libsim.a $(EXTRA_LIBS) -+ -+# CGEN support. -+ -+# For use in Makefile.in for cpu-specific files. -+CGEN_MAIN_CPU_DEPS = \ -+ $(SIM_MAIN_DEPS) \ -+ $(srccom)/cgen-ops.h \ -+ $(srccom)/cgen-mem.h -+ -+# Support targets. -+ -+install: install-common $(SIM_EXTRA_INSTALL) -+ -+install-common: installdirs -+ n=`echo run | sed '$(program_transform_name)'`; \ -+ $(INSTALL_PROGRAM) run$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT) -+ n=`echo libsim.a | sed s/libsim.a/lib$(target_alias)-sim.a/`; \ -+ $(INSTALL_DATA) libsim.a $(DESTDIR)$(libdir)/$$n ; \ -+ ( cd $(DESTDIR)$(libdir) ; $(RANLIB) $$n ) -+ -+installdirs: -+ $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(bindir) -+ $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(libdir) -+ -+check: -+ cd ../testsuite && $(MAKE) check RUNTESTFLAGS="$(RUNTESTFLAGS)" -+ -+info: -+clean-info: -+install-info: -+ -+.NOEXPORT: -+MAKEOVERRIDES= -+ -+tags etags: TAGS -+ -+# Macros like EXTERN_SIM_CORE confuse tags. -+# And the sim-n-foo.h files create functions that can't be found either. -+TAGS: force -+ cd $(srcdir) && \ -+ etags --regex '/^\([[:lower:]_]+\) (/\1/' --regex '/^\/[*] TAGS: .*/' \ -+ *.[ch] ../common/*.[ch] -+ -+clean: $(SIM_EXTRA_CLEAN) -+ rm -f *.[oa] *~ core -+ rm -f run$(EXEEXT) libsim.a -+ rm -f gentmap targ-map.c targ-vals.h stamp-tvals -+ if [ ! -f Make-common.in ] ; then \ -+ rm -f $(BUILT_SRC_FROM_COMMON) ; \ -+ fi -+ rm -f tmp-mloop.hin tmp-mloop.h tmp-mloop.cin tmp-mloop.c -+ -+distclean mostlyclean maintainer-clean realclean: clean $(SIM_EXTRA_DISTCLEAN) -+ rm -f TAGS -+ rm -f Makefile config.cache config.log config.status .gdbinit -+ rm -f tconfig.h config.h stamp-h -+ rm -f targ-vals.def -+ -+.c.o: -+ $(COMPILE) $< -+ $(POSTCOMPILE) -+ -+# Dummy target to force execution of dependent targets. -+force: -+ -+Makefile: Makefile.in $(srccom)/Make-common.in config.status -+ CONFIG_HEADERS= $(SHELL) ./config.status -+ -+config.status: configure -+ $(SHELL) ./config.status --recheck -+ -+config.h: stamp-h ; @true -+stamp-h: config.in config.status -+ CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status -+ -+.gdbinit: # config.status $(srccom)/gdbinit.in -+ CONFIG_FILES=$@:../common/gdbinit.in CONFIG_HEADERS= $(SHELL) ./config.status -+ -+ -+# CGEN support -+ -+CGENDIR = @cgendir@ -+CGEN = "`if [ -f ../../guile/libguile/guile ]; then echo ../../guile/libguile/guile; else echo guile ; fi` -l $(CGENDIR)/guile.scm -s" -+CGENFLAGS = -v -+CGEN_CPU_DIR = $(CGENDIR)/cpu -+ -+# Most ports use the files here instead of cgen/cpu. -+CPU_DIR = $(srcroot)/cpu -+ -+CGEN_READ_SCM = $(CGENDIR)/sim.scm -+CGEN_ARCH_SCM = $(CGENDIR)/sim-arch.scm -+CGEN_CPU_SCM = $(CGENDIR)/sim-cpu.scm $(CGENDIR)/sim-model.scm -+CGEN_DECODE_SCM = $(CGENDIR)/sim-decode.scm -+CGEN_DESC_SCM = $(CGENDIR)/desc.scm $(CGENDIR)/desc-cpu.scm -+ -+# Various choices for which cpu specific files to generate. -+# These are passed to cgen.sh in the "extrafiles" argument. -+CGEN_CPU_EXTR = /extr/ -+CGEN_CPU_READ = /read/ -+CGEN_CPU_WRITE = /write/ -+CGEN_CPU_SEM = /sem/ -+CGEN_CPU_SEMSW = /semsw/ -+ -+CGEN_FLAGS_TO_PASS = \ -+ CGEN='$(CGEN)' \ -+ CGENFLAGS="$(CGENFLAGS)" -+ -+# We store the generated files in the source directory until we decide to -+# ship a Scheme interpreter with gdb/binutils. Maybe we never will. -+ -+cgen-arch: force -+ $(SHELL) $(srccom)/cgen.sh arch $(srcdir) \ -+ $(CGEN) $(CGENDIR) "$(CGENFLAGS)" \ -+ $(arch) "$(FLAGS)" ignored "$(isa)" $(mach) ignored \ -+ $(archfile) ignored -+ -+cgen-cpu: force -+ $(SHELL) $(srccom)/cgen.sh cpu $(srcdir) \ -+ $(CGEN) $(CGENDIR) "$(CGENFLAGS)" \ -+ $(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \ -+ $(archfile) "$(EXTRAFILES)" -+ -+cgen-defs: force -+ $(SHELL) $(srccom)/cgen.sh defs $(srcdir) \ -+ $(CGEN) $(CGENDIR) "$(CGENFLAGS)" \ -+ $(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \ -+ $(archfile) ignored -+ -+cgen-decode: force -+ $(SHELL) $(srccom)/cgen.sh decode $(srcdir) \ -+ $(CGEN) $(CGENDIR) "$(CGENFLAGS)" \ -+ $(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \ -+ $(archfile) "$(EXTRAFILES)" -+ -+cgen-cpu-decode: force -+ $(SHELL) $(srccom)/cgen.sh cpu-decode $(srcdir) \ -+ $(CGEN) $(CGENDIR) "$(CGENFLAGS)" \ -+ $(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \ -+ $(archfile) "$(EXTRAFILES)" -+ -+cgen-desc: force -+ $(SHELL) $(srccom)/cgen.sh desc $(srcdir) \ -+ $(CGEN) $(CGENDIR) "$(CGENFLAGS)" \ -+ $(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \ -+ $(archfile) ignored $(opcfile) -+ -+## End COMMON_POST_CONFIG_FRAG diff --git a/select_toolchain.sh b/select_toolchain.sh index 2180584..14a8765 100755 --- a/select_toolchain.sh +++ b/select_toolchain.sh @@ -33,7 +33,7 @@ case "$VERSION" in GCC_VER=4.9.0 BINUTILS_VER=2.24 NEWLIB_VER=2.1.0 - GDB_VER=7.7 + GDB_VER=7.7.1 basedir='dkarm-eabi' package=devkitARM target=arm-none-eabi