diff --git a/dkarm-eabi/patches/gdb-7.7.1.patch b/dkarm-eabi/patches/gdb-7.7.1.patch
new file mode 100644
index 0000000..06ea8f1
--- /dev/null
+++ b/dkarm-eabi/patches/gdb-7.7.1.patch
@@ -0,0 +1,32 @@
+diff -Nbaur gdb-7.7.1/gdb/Makefile.in gdb-7.7.1-arm/gdb/Makefile.in
+--- gdb-7.7.1/gdb/Makefile.in	2014-05-05 22:51:24.000000000 +0100
++++ gdb-7.7.1-arm/gdb/Makefile.in	2014-05-18 17:05:16.105567001 +0100
+@@ -2307,10 +2307,8 @@
+ # Note that we put the dependencies into a .Tpo file, then move them
+ # into place if the compile succeeds.  We need this because gcc does
+ # not atomically write the dependency output file.
+-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
+-@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
+-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
+-@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
++@GMAKE_TRUE@override COMPILE.post = -c -o $@
++@GMAKE_TRUE@override POSTCOMPILE =
+ @GMAKE_TRUE@else
+ @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
+ @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
+diff -Nbaur gdb-7.7.1/sim/common/Make-common.in gdb-7.7.1-arm/sim/common/Make-common.in
+--- gdb-7.7.1/sim/common/Make-common.in	2014-01-08 09:23:36.000000000 +0000
++++ gdb-7.7.1-arm/sim/common/Make-common.in	2014-05-18 17:05:16.105567001 +0100
+@@ -415,10 +415,8 @@
+ # Note that we put the dependencies into a .Tpo file, then move them
+ # into place if the compile succeeds.  We need this because gcc does
+ # not atomically write the dependency output file.
+-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
+-@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
+-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
+-@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
++@GMAKE_TRUE@override COMPILE.post = -c -o $@
++@GMAKE_TRUE@override POSTCOMPILE =
+ @GMAKE_TRUE@else
+ @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
+ @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
diff --git a/dkarm-eabi/patches/gdb-7.7.patch b/dkarm-eabi/patches/gdb-7.7.patch
deleted file mode 100644
index 63f9ca5..0000000
--- a/dkarm-eabi/patches/gdb-7.7.patch
+++ /dev/null
@@ -1,3004 +0,0 @@
-diff -Nbaur gdb-7.7/gdb/Makefile.in gdb-7.7-arm/gdb/Makefile.in
---- gdb-7.7/gdb/Makefile.in	2014-02-06 02:21:29.000000000 +0000
-+++ gdb-7.7-arm/gdb/Makefile.in	2014-02-16 19:43:34.000000000 +0000
-@@ -2307,10 +2307,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@
-+@GMAKE_TRUE@override POSTCOMPILE =
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.7/gdb/Makefile.in.orig gdb-7.7-arm/gdb/Makefile.in.orig
---- gdb-7.7/gdb/Makefile.in.orig	1970-01-01 01:00:00.000000000 +0100
-+++ gdb-7.7-arm/gdb/Makefile.in.orig	2014-02-06 02:21:29.000000000 +0000
-@@ -0,0 +1,2339 @@
-+# Copyright (C) 1989-2014 Free Software Foundation, Inc.
-+
-+# This file is part of GDB.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 3 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+
-+prefix = @prefix@
-+exec_prefix = @exec_prefix@
-+
-+host_alias = @host_alias@
-+target_alias = @target_alias@
-+program_transform_name = @program_transform_name@
-+bindir = @bindir@
-+libdir = @libdir@
-+tooldir = $(libdir)/$(target_alias)
-+
-+datadir = @datadir@
-+localedir = @localedir@
-+mandir = @mandir@
-+man1dir = $(mandir)/man1
-+man2dir = $(mandir)/man2
-+man3dir = $(mandir)/man3
-+man4dir = $(mandir)/man4
-+man5dir = $(mandir)/man5
-+man6dir = $(mandir)/man6
-+man7dir = $(mandir)/man7
-+man8dir = $(mandir)/man8
-+man9dir = $(mandir)/man9
-+infodir = @infodir@
-+datarootdir = @datarootdir@
-+docdir = @docdir@
-+htmldir = @htmldir@
-+pdfdir = @pdfdir@
-+includedir = @includedir@
-+
-+install_sh = @install_sh@
-+
-+# This can be referenced by `LIBINTL' as computed by
-+# ZW_GNU_GETTEXT_SISTER_DIR.
-+top_builddir = .
-+
-+SHELL = @SHELL@
-+EXEEXT = @EXEEXT@
-+
-+AWK = @AWK@
-+LN_S = @LN_S@
-+
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+INSTALL_SCRIPT = @INSTALL_SCRIPT@
-+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-+INSTALL_DATA = @INSTALL_DATA@
-+
-+DESTDIR =
-+
-+AR = @AR@
-+AR_FLAGS = qv
-+RANLIB = @RANLIB@
-+DLLTOOL = @DLLTOOL@
-+WINDRES = @WINDRES@
-+MIG = @MIG@
-+STRIP = @STRIP@
-+
-+XGETTEXT = @XGETTEXT@
-+GMSGFMT = @GMSGFMT@
-+MSGMERGE = msgmerge
-+
-+PACKAGE = @PACKAGE@
-+CATALOGS = @CATALOGS@
-+
-+# If you are compiling with GCC, make sure that either 1) You have the
-+# fixed include files where GCC can reach them, or 2) You use the
-+# -traditional flag.  Otherwise the ioctl calls in inflow.c
-+# will be incorrectly compiled.  The "fixincludes" script in the gcc
-+# distribution will fix your include files up.
-+CC=@CC@
-+
-+# Dependency tracking information.
-+DEPMODE = @CCDEPMODE@
-+DEPDIR = @DEPDIR@
-+depcomp = $(SHELL) $(srcdir)/../depcomp
-+
-+# Note that these are overridden by GNU make-specific code below if
-+# GNU make is used.  The overrides implement dependency tracking.
-+COMPILE.pre = $(CC)
-+COMPILE.post = -c -o $@
-+COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
-+POSTCOMPILE = @true
-+
-+# Directory containing source files.
-+srcdir = @srcdir@
-+VPATH = @srcdir@
-+
-+YACC=@YACC@
-+
-+# This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
-+# not defined, but ada-lex.c is present, compilation will continue,
-+# possibly with a warning.
-+FLEX = flex
-+
-+YLWRAP = $(srcdir)/../ylwrap
-+
-+# where to find makeinfo, preferably one designed for texinfo-2
-+MAKEINFO = @MAKEINFO@
-+MAKEINFOFLAGS = @MAKEINFOFLAGS@
-+MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
-+MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
-+
-+MAKEHTML = $(MAKEINFO_CMD) --html
-+MAKEHTMLFLAGS =
-+
-+# Set this up with gcc if you have gnu ld and the loader will print out
-+# line numbers for undefined references.
-+#CC_LD=gcc -static
-+CC_LD=$(CC)
-+
-+# Where is our "include" directory?  Typically $(srcdir)/../include.
-+# This is essentially the header file directory for the library
-+# routines in libiberty.
-+INCLUDE_DIR =  $(srcdir)/../include
-+INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
-+
-+# Where is the "-liberty" library?  Typically in ../libiberty.
-+LIBIBERTY = ../libiberty/libiberty.a
-+
-+# Where is the BFD library?  Typically in ../bfd.
-+BFD_DIR = ../bfd
-+BFD = $(BFD_DIR)/libbfd.a
-+BFD_SRC = $(srcdir)/$(BFD_DIR)
-+BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
-+
-+# Where is the decnumber library?  Typically in ../libdecnumber.
-+LIBDECNUMBER_DIR = ../libdecnumber
-+LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
-+LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
-+LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
-+
-+# Where is the READLINE library?  Typically in ../readline.
-+READLINE_DIR = ../readline
-+READLINE_SRC = $(srcdir)/$(READLINE_DIR)
-+READLINE = @READLINE@
-+READLINE_DEPS = @READLINE_DEPS@
-+READLINE_CFLAGS = @READLINE_CFLAGS@
-+
-+# Where is expat?  This will be empty if expat was not available.
-+LIBEXPAT = @LIBEXPAT@
-+
-+# Where is lzma?  This will be empty if lzma was not available.
-+LIBLZMA = @LIBLZMA@
-+
-+# Where is libbabeltrace? This will be empty if lbabeltrace was not
-+# available.
-+LIBBABELTRACE = @LIBBABELTRACE@
-+
-+WARN_CFLAGS = @WARN_CFLAGS@
-+WERROR_CFLAGS = @WERROR_CFLAGS@
-+GDB_WARN_CFLAGS = $(WARN_CFLAGS)
-+GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
-+
-+GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " \
-+		   | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
-+GDB_WARN_CFLAGS_NO_DEFS = `echo " $(GDB_WARN_CFLAGS) " \
-+		   | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
-+
-+RDYNAMIC = @RDYNAMIC@
-+
-+# Where is the INTL library?  Typically in ../intl.
-+INTL = @LIBINTL@
-+INTL_DEPS = @LIBINTL_DEP@
-+INTL_CFLAGS = @INCINTL@
-+
-+# Did the user give us a --with-gdb-datadir option?
-+GDB_DATADIR = @GDB_DATADIR@
-+
-+# Flags to pass to gdb when invoked with "make run".
-+GDBFLAGS =
-+
-+# Helper code from gnulib.
-+GNULIB_BUILDDIR = build-gnulib
-+LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
-+INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
-+
-+# Generated headers in the gnulib directory.  These must be listed
-+# so that they are generated before other files are compiled.
-+GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
-+
-+#
-+# CLI sub directory definitons
-+#
-+SUBDIR_CLI_OBS = \
-+	cli-dump.o \
-+	cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
-+	cli-logging.o \
-+	cli-interp.o cli-utils.o
-+SUBDIR_CLI_SRCS = \
-+	cli/cli-dump.c \
-+	cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
-+	cli/cli-logging.c \
-+	cli/cli-interp.c cli/cli-utils.c
-+SUBDIR_CLI_DEPS =
-+SUBDIR_CLI_LDFLAGS=
-+SUBDIR_CLI_CFLAGS=
-+
-+#
-+# MI sub directory definitons
-+#
-+SUBDIR_MI_OBS = \
-+	mi-out.o mi-console.o \
-+	mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
-+	mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
-+	mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
-+	mi-cmd-info.o mi-interp.o \
-+	mi-main.o mi-parse.o mi-getopt.o
-+SUBDIR_MI_SRCS = \
-+	mi/mi-out.c mi/mi-console.c \
-+	mi/mi-cmds.c mi/mi-cmd-catch.c mi/mi-cmd-env.c \
-+	mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
-+	mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
-+	mi/mi-cmd-target.c mi/mi-cmd-info.c mi/mi-interp.c \
-+	mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c
-+SUBDIR_MI_DEPS =
-+SUBDIR_MI_LDFLAGS=
-+SUBDIR_MI_CFLAGS=
-+
-+#
-+# TUI sub directory definitions
-+#
-+
-+SUBDIR_TUI_OBS = \
-+	tui-command.o \
-+	tui-data.o \
-+	tui-disasm.o \
-+	tui-file.o \
-+	tui-hooks.o \
-+	tui-interp.o \
-+	tui-io.o \
-+	tui-layout.o \
-+	tui-out.o \
-+	tui-regs.o \
-+	tui-source.o \
-+	tui-stack.o \
-+	tui-win.o \
-+	tui-windata.o \
-+	tui-wingeneral.o \
-+	tui-winsource.o \
-+	tui.o
-+
-+SUBDIR_TUI_SRCS = \
-+	tui/tui-command.c \
-+	tui/tui-data.c \
-+	tui/tui-disasm.c \
-+	tui/tui-file.c \
-+	tui/tui-hooks.c \
-+	tui/tui-interp.c \
-+	tui/tui-io.c \
-+	tui/tui-layout.c \
-+	tui/tui-out.c \
-+	tui/tui-regs.c \
-+	tui/tui-source.c \
-+	tui/tui-stack.c \
-+	tui/tui-win.c \
-+	tui/tui-windata.c \
-+	tui/tui-wingeneral.c \
-+	tui/tui-winsource.c \
-+	tui/tui.c
-+
-+SUBDIR_TUI_DEPS =
-+SUBDIR_TUI_LDFLAGS=
-+SUBDIR_TUI_CFLAGS= \
-+	-DTUI=1
-+
-+#
-+# python sub directory definitons
-+#
-+SUBDIR_PYTHON_OBS = \
-+	python.o \
-+	py-arch.o \
-+	py-auto-load.o \
-+	py-block.o \
-+	py-bpevent.o \
-+	py-breakpoint.o \
-+	py-cmd.o \
-+	py-continueevent.o \
-+	py-event.o \
-+	py-evtregistry.o \
-+	py-evts.o \
-+	py-exitedevent.o \
-+	py-finishbreakpoint.o \
-+	py-frame.o \
-+	py-framefilter.o \
-+	py-function.o \
-+	py-gdb-readline.o \
-+	py-inferior.o \
-+	py-infthread.o \
-+	py-lazy-string.o \
-+	py-linetable.o \
-+	py-newobjfileevent.o \
-+	py-objfile.o \
-+	py-param.o \
-+	py-prettyprint.o \
-+	py-progspace.o \
-+	py-signalevent.o \
-+	py-stopevent.o \
-+	py-symbol.o \
-+	py-symtab.o \
-+	py-threadevent.o \
-+	py-type.o \
-+	py-utils.o \
-+	py-value.o
-+
-+SUBDIR_PYTHON_SRCS = \
-+	python/python.c \
-+	python/py-arch.c \
-+	python/py-auto-load.c \
-+	python/py-block.c \
-+	python/py-bpevent.c \
-+	python/py-breakpoint.c \
-+	python/py-cmd.c \
-+	python/py-continueevent.c \
-+	python/py-event.c \
-+	python/py-evtregistry.c \
-+	python/py-evts.c \
-+	python/py-exitedevent.c \
-+	python/py-finishbreakpoint.c \
-+	python/py-frame.c \
-+	python/py-framefilter.c \
-+	python/py-function.c \
-+	python/py-gdb-readline.c \
-+	python/py-inferior.c \
-+	python/py-infthread.c \
-+	python/py-lazy-string.c \
-+	python/py-linetable.c \
-+	python/py-newobjfileevent.c \
-+	python/py-objfile.c \
-+	python/py-param.c \
-+	python/py-prettyprint.c \
-+	python/py-progspace.c \
-+	python/py-signalevent.c \
-+	python/py-stopevent.c \
-+	python/py-symbol.c \
-+	python/py-symtab.c \
-+	python/py-threadevent.c \
-+	python/py-type.c \
-+	python/py-utils.c \
-+	python/py-value.c
-+SUBDIR_PYTHON_DEPS =
-+SUBDIR_PYTHON_LDFLAGS=
-+SUBDIR_PYTHON_CFLAGS=
-+
-+# Opcodes currently live in one of two places.  Either they are in the
-+# opcode library, typically ../opcodes, or they are in a header file
-+# in INCLUDE_DIR.
-+# Where is the "-lopcodes" library, with (some of) the opcode tables and
-+# disassemblers?
-+OPCODES_DIR = ../opcodes
-+OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
-+OPCODES = $(OPCODES_DIR)/libopcodes.a
-+# Where are the other opcode tables which only have header file
-+# versions?
-+OP_INCLUDE = $(INCLUDE_DIR)/opcode
-+# Some source files like to use #include "opcodes/file.h"
-+OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
-+
-+# The simulator is usually nonexistent; targets that include one
-+# should set this to list all the .o or .a files to be linked in.
-+SIM = @SIM@
-+
-+WIN32LIBS = @WIN32LIBS@
-+
-+# Tcl et al cflags and libraries
-+TCL = @TCL_LIBRARY@
-+TCL_CFLAGS = @TCL_INCLUDE@
-+GDBTKLIBS = @GDBTKLIBS@
-+# Extra flags that the GDBTK files need:
-+GDBTK_CFLAGS = @GDBTK_CFLAGS@
-+
-+TK = @TK_LIBRARY@
-+TK_CFLAGS = @TK_INCLUDE@
-+
-+X11_CFLAGS = @TK_XINCLUDES@
-+X11_LDFLAGS =
-+X11_LIBS =
-+
-+WIN32LDAPP = @WIN32LDAPP@
-+
-+LIBGUI = @LIBGUI@
-+GUI_CFLAGS_X = @GUI_CFLAGS_X@
-+IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
-+
-+ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
-+
-+# The version of gdbtk we're building. This should be kept
-+# in sync with GDBTK_VERSION and friends in gdbtk.h.
-+GDBTK_VERSION = 1.0
-+GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
-+
-+# Gdbtk requires an absolute path to the source directory or
-+# the testsuite won't run properly.
-+GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
-+
-+SUBDIR_GDBTK_OBS = \
-+	gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
-+	gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
-+SUBDIR_GDBTK_SRCS = \
-+	gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
-+	gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
-+	gdbtk/generic/gdbtk-interp.c \
-+	gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
-+	gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
-+	gdbtk/generic/gdbtk-main.c
-+SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
-+SUBDIR_GDBTK_LDFLAGS=
-+SUBDIR_GDBTK_CFLAGS= -DGDBTK
-+
-+CONFIG_OBS= @CONFIG_OBS@
-+CONFIG_SRCS= @CONFIG_SRCS@
-+CONFIG_DEPS= @CONFIG_DEPS@
-+CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
-+ENABLE_CFLAGS= @ENABLE_CFLAGS@
-+CONFIG_ALL= @CONFIG_ALL@
-+CONFIG_CLEAN= @CONFIG_CLEAN@
-+CONFIG_INSTALL = @CONFIG_INSTALL@
-+CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
-+HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
-+
-+# -I. for config files.
-+# -I$(srcdir) for gdb internal headers.
-+# -I$(srcdir)/config for more generic config files.
-+
-+# It is also possible that you will need to add -I/usr/include/sys if
-+# your system doesn't have fcntl.h in /usr/include (which is where it
-+# should be according to Posix).
-+DEFS = @DEFS@
-+GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
-+	-DLOCALEDIR="\"$(localedir)\"" $(DEFS)
-+
-+# MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
-+GLOBAL_CFLAGS = $(MH_CFLAGS)
-+
-+PROFILE_CFLAGS = @PROFILE_CFLAGS@
-+
-+# CFLAGS is specifically reserved for setting from the command line
-+# when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
-+CFLAGS = @CFLAGS@
-+
-+# Set by configure, for e.g. expat.  Python installations are such that
-+# C headers are included using their basename (for example, we #include
-+# <Python.h> rather than, say, <python/Python.h>).  Since the file names
-+# are sometimes a little generic, we think that the risk of collision
-+# with other header files is high.  If that happens, we try to mitigate
-+# a bit the consequences by putting the Python includes last in the list.
-+INTERNAL_CPPFLAGS = @CPPFLAGS@ @PYTHON_CPPFLAGS@
-+
-+# Need to pass this to testsuite for "make check".  Probably should be
-+# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
-+# so "make check" has the same result no matter where it is run.
-+CXXFLAGS = -g -O
-+
-+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
-+INTERNAL_CFLAGS_BASE = \
-+	$(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
-+	$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
-+	$(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
-+	$(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
-+INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
-+INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
-+
-+# LDFLAGS is specifically reserved for setting from the command line
-+# when running make.
-+LDFLAGS = @LDFLAGS@
-+
-+# Profiling options need to go here to work.
-+# I think it's perfectly reasonable for a user to set -pg in CFLAGS
-+# and have it work; that's why CFLAGS is here.
-+# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
-+INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
-+
-+# If your system is missing alloca(), or, more likely, it's there but
-+# it doesn't work, then refer to libiberty.
-+
-+# Libraries and corresponding dependencies for compiling gdb.
-+# XM_CLIBS, defined in *config files, have host-dependent libs.
-+# LIBIBERTY appears twice on purpose.
-+CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
-+	$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
-+	$(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) \
-+	$(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
-+CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
-+	$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
-+
-+ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-+ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-+
-+DIST=gdb
-+
-+LINT=/usr/5bin/lint
-+LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
-+	$(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
-+	$(INTL_CFLAGS)
-+
-+RUNTEST = runtest
-+RUNTESTFLAGS=
-+
-+# XML files to build in to GDB.
-+XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
-+	$(srcdir)/features/library-list.dtd \
-+	$(srcdir)/features/library-list-aix.dtd \
-+	$(srcdir)/features/library-list-svr4.dtd $(srcdir)/features/osdata.dtd \
-+	$(srcdir)/features/threads.dtd $(srcdir)/features/traceframe-info.dtd \
-+	$(srcdir)/features/btrace.dtd
-+
-+# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
-+# interface to the serial port.  Hopefully if get ported to OS/2, VMS,
-+# etc., then there will be (as part of the C library or perhaps as
-+# part of libiberty) a POSIX interface.  But at least for now the
-+# host-dependent makefile fragment might need to use something else
-+# besides ser-unix.o
-+SER_HARDWIRE = @SER_HARDWIRE@
-+
-+# The `remote' debugging target is supported for most architectures,
-+# but not all (e.g. 960)
-+REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
-+	remote-notif.o ctf.o
-+
-+# This is remote-sim.o if a simulator is to be linked in.
-+SIM_OBS = @SIM_OBS@
-+
-+# Target-dependent object files.
-+TARGET_OBS = @TARGET_OBS@
-+
-+# All target-dependent objects files that require 64-bit CORE_ADDR
-+# (used with --enable-targets=all --enable-64-bit-bfd).
-+ALL_64_TARGET_OBS = \
-+	aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
-+	alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
-+	alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
-+	amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
-+	amd64-linux-tdep.o amd64nbsd-tdep.o \
-+	amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
-+	ia64-hpux-tdep.o ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
-+	mips64obsd-tdep.o \
-+	sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
-+	sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
-+
-+# All other target-dependent objects files (used with --enable-targets=all).
-+ALL_TARGET_OBS = \
-+	armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
-+	armnbsd-tdep.o armobsd-tdep.o \
-+	arm-tdep.o arm-wince-tdep.o \
-+	avr-tdep.o \
-+	bfin-linux-tdep.o bfin-tdep.o \
-+	cris-linux-tdep.o cris-tdep.o \
-+	dicos-tdep.o \
-+	frv-linux-tdep.o frv-tdep.o \
-+	h8300-tdep.o \
-+	hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
-+	hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
-+	i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
-+	i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
-+	i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
-+	i386-dicos-tdep.o i386-darwin-tdep.o \
-+	iq2000-tdep.o \
-+	linux-tdep.o \
-+	lm32-tdep.o \
-+	m32c-tdep.o \
-+	m32r-linux-tdep.o m32r-tdep.o \
-+	m68hc11-tdep.o \
-+	m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
-+	m88k-tdep.o \
-+	mep-tdep.o \
-+	microblaze-tdep.o microblaze-linux-tdep.o \
-+	mips-irix-tdep.o mips-linux-tdep.o \
-+	mipsnbsd-tdep.o mips-tdep.o \
-+	mn10300-linux-tdep.o mn10300-tdep.o \
-+	moxie-tdep.o \
-+	msp430-tdep.o \
-+	mt-tdep.o \
-+	nios2-tdep.o nios2-linux-tdep.o \
-+	nto-tdep.o \
-+	ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o  \
-+	ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
-+	rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
-+	rs6000-lynx178-tdep.o \
-+	rx-tdep.o \
-+	s390-linux-tdep.o \
-+	score-tdep.o \
-+	sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
-+	sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
-+	sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
-+	spu-tdep.o spu-multiarch.o solib-spu.o \
-+	tic6x-tdep.o tic6x-linux-tdep.o \
-+	tilegx-tdep.o tilegx-linux-tdep.o \
-+	v850-tdep.o \
-+	vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
-+	xstormy16-tdep.o \
-+	xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
-+	glibc-tdep.o \
-+	bsd-uthread.o \
-+	nbsd-tdep.o obsd-tdep.o \
-+	sol2-tdep.o \
-+	solib-frv.o solib-irix.o solib-svr4.o \
-+	solib-som.o solib-pa64.o solib-darwin.o solib-dsbt.o \
-+	dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
-+	remote-m32r-sdi.o remote-mips.o \
-+	xcoffread.o \
-+	symfile-mem.o \
-+	windows-tdep.o \
-+	linux-record.o \
-+	ravenscar-thread.o
-+
-+# Host-dependent makefile fragment comes in here.
-+@host_makefile_frag@
-+# End of host-dependent makefile fragment
-+
-+FLAGS_TO_PASS = \
-+	"prefix=$(prefix)" \
-+	"exec_prefix=$(exec_prefix)" \
-+	"infodir=$(infodir)" \
-+	"datarootdir=$(datarootdir)" \
-+	"docdir=$(docdir)" \
-+	"htmldir=$(htmldir)" \
-+	"pdfdir=$(pdfdir)" \
-+	"libdir=$(libdir)" \
-+	"mandir=$(mandir)" \
-+	"datadir=$(datadir)" \
-+	"includedir=$(includedir)" \
-+	"against=$(against)" \
-+	"DESTDIR=$(DESTDIR)" \
-+	"AR=$(AR)" \
-+	"AR_FLAGS=$(AR_FLAGS)" \
-+	"CC=$(CC)" \
-+	"CFLAGS=$(CFLAGS)" \
-+	"CXX=$(CXX)" \
-+	"CXXFLAGS=$(CXXFLAGS)" \
-+	"DLLTOOL=$(DLLTOOL)" \
-+	"LDFLAGS=$(LDFLAGS)" \
-+	"RANLIB=$(RANLIB)" \
-+	"MAKEINFO=$(MAKEINFO)" \
-+	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
-+	"MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
-+	"MAKEHTML=$(MAKEHTML)" \
-+	"MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
-+	"INSTALL=$(INSTALL)" \
-+	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-+	"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
-+	"INSTALL_DATA=$(INSTALL_DATA)" \
-+	"RUNTEST=$(RUNTEST)" \
-+	"RUNTESTFLAGS=$(RUNTESTFLAGS)"
-+
-+# Flags that we pass when building the testsuite.
-+
-+# empty for native, $(target_alias)/ for cross
-+target_subdir = @target_subdir@
-+
-+CC_FOR_TARGET = ` \
-+  if [ -f $${rootme}/../gcc/xgcc ] ; then \
-+    if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
-+      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
-+    else \
-+      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
-+    fi; \
-+  else \
-+    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
-+      echo $(CC); \
-+    else \
-+      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
-+    fi; \
-+  fi`
-+
-+CXX = gcc
-+CXX_FOR_TARGET = ` \
-+  if [ -f $${rootme}/../gcc/xgcc ] ; then \
-+    if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
-+      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
-+    else \
-+      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
-+    fi; \
-+  else \
-+    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
-+      echo $(CXX); \
-+    else \
-+      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
-+    fi; \
-+  fi`
-+
-+# The use of $$(x_FOR_TARGET) reduces the command line length by not
-+# duplicating the lengthy definition.
-+TARGET_FLAGS_TO_PASS = \
-+	"prefix=$(prefix)" \
-+	"exec_prefix=$(exec_prefix)" \
-+	"against=$(against)" \
-+	'CC=$$(CC_FOR_TARGET)' \
-+	"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
-+	"CFLAGS=$(CFLAGS)" \
-+	'CXX=$$(CXX_FOR_TARGET)' \
-+	"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
-+	"CXXFLAGS=$(CXXFLAGS)" \
-+	"INSTALL=$(INSTALL)" \
-+	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-+	"INSTALL_DATA=$(INSTALL_DATA)" \
-+	"MAKEINFO=$(MAKEINFO)" \
-+	"MAKEHTML=$(MAKEHTML)" \
-+	"RUNTEST=$(RUNTEST)" \
-+	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
-+	"FORCE_PARALLEL=$(FORCE_PARALLEL)"
-+
-+# All source files that go into linking GDB.
-+# Links made at configuration time should not be specified here, since
-+# SFILES is used in building the distribution archive.
-+
-+SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
-+	ada-varobj.c \
-+	addrmap.c auto-load.c \
-+	auxv.c ax-general.c ax-gdb.c \
-+	agent.c \
-+	bcache.c \
-+	bfd-target.c \
-+	block.c blockframe.c \
-+	breakpoint.c break-catch-sig.c break-catch-throw.c \
-+	build-id.c buildsym.c \
-+	c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
-+	charset.c cleanups.c cli-out.c coffread.c coff-pe-read.c \
-+	complaints.c completer.c continuations.c corefile.c corelow.c \
-+	cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
-+	d-lang.c d-valprint.c \
-+	cp-name-parser.y \
-+	dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
-+	dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
-+	dwarf2-frame-tailcall.c \
-+	elfread.c environ.c eval.c event-loop.c event-top.c \
-+	exceptions.c expprint.c \
-+	f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
-+	findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
-+	gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
-+	gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
-+	go-exp.y go-lang.c go-typeprint.c go-valprint.c \
-+	inf-loop.c \
-+	infcall.c \
-+	infcmd.c inflow.c infrun.c \
-+	inline-frame.c \
-+	interps.c \
-+	jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
-+	language.c linespec.c minidebug.c \
-+	m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
-+	macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
-+	mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
-+	memrange.c mi/mi-common.c \
-+	objc-lang.c \
-+	objfiles.c osabi.c observer.c osdata.c \
-+	opencl-lang.c \
-+	p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
-+	proc-service.list progspace.c \
-+	prologue-value.c psymtab.c \
-+	regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
-+	sentinel-frame.c \
-+	serial.c ser-base.c ser-unix.c skip.c \
-+	solib.c solib-target.c source.c \
-+	stabsread.c stack.c probe.c stap-probe.c std-regs.c \
-+	symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
-+	target.c target-dcache.c target-descriptions.c target-memory.c \
-+	thread.c top.c tracepoint.c \
-+	trad-frame.c \
-+	tramp-frame.c \
-+	typeprint.c \
-+	ui-out.c utils.c ui-file.h ui-file.c \
-+	user-regs.c \
-+	valarith.c valops.c valprint.c value.c varobj.c common/vec.c \
-+	xml-tdesc.c xml-support.c \
-+	inferior.c gdb_usleep.c \
-+	record.c record-full.c gcore.c \
-+	jit.c \
-+	xml-syscall.c \
-+	annotate.c common/signals.c copying.c dfp.c gdb.c inf-child.c \
-+	regset.c sol-thread.c windows-termcap.c \
-+	common/gdb_vecs.c common/common-utils.c common/xml-utils.c \
-+	common/ptid.c common/buffer.c gdb-dlfcn.c common/agent.c \
-+	common/format.c common/filestuff.c btrace.c record-btrace.c ctf.c \
-+	target/waitstatus.c
-+
-+LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
-+
-+# Header files that need to have srcdir added.  Note that in the cases
-+# where we use a macro like $(gdbcmd_h), things are carefully arranged
-+# so that each .h file is listed exactly once (M-x tags-search works
-+# wrong if TAGS has files twice).  Because this is tricky to get
-+# right, it is probably easiest just to list .h files here directly.
-+
-+HFILES_NO_SRCDIR = \
-+common/gdb_signals.h common/gdb_thread_db.h common/gdb_vecs.h \
-+common/i386-xstate.h common/linux-ptrace.h common/mips-linux-watch.h \
-+proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
-+ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
-+exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \
-+i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
-+ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
-+c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
-+cli/cli-decode.h cli/cli-cmds.h cli/cli-utils.h \
-+cli/cli-script.h macrotab.h symtab.h common/version.h \
-+gnulib/import/string.in.h gnulib/import/str-two-way.h \
-+gnulib/import/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
-+gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
-+amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
-+gdbarch.h bsd-uthread.h memory-map.h memrange.h \
-+mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
-+ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
-+f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
-+objfiles.h common/vec.h disasm.h mips-tdep.h ser-base.h \
-+gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
-+inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h inf-ttrace.h \
-+solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
-+m2-lang.h stack.h charset.h cleanups.h addrmap.h command.h solist.h source.h \
-+target.h target-dcache.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
-+tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
-+tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
-+tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
-+tui/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
-+expression.h score-tdep.h gdb_select.h ser-tcp.h \
-+build-id.h buildsym.h valprint.h \
-+typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
-+mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
-+complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
-+common/gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
-+interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h	\
-+amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
-+sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
-+coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
-+m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
-+doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
-+rs6000-tdep.h rs6000-aix-tdep.h \
-+common/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
-+language.h nbsd-tdep.h solib-svr4.h \
-+macroexp.h ui-file.h regcache.h tracepoint.h i386-tdep.h \
-+inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
-+regformats/regdef.h config/alpha/nm-osf3.h  config/i386/nm-i386gnu.h \
-+config/i386/nm-fbsd.h \
-+config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
-+top.h bsd-kvm.h gdb-stabs.h reggroups.h \
-+annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h	\
-+remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
-+sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
-+gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
-+psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
-+amd64-darwin-tdep.h charset-list.h \
-+config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
-+dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
-+i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
-+osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
-+python/python-internal.h python/python.h ravenscar-thread.h record.h \
-+record-full.h solib-aix.h \
-+solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \
-+gnulib/import/extra/snippet/arg-nonnull.h gnulib/import/extra/snippet/c++defs.h \
-+gnulib/import/extra/snippet/warn-on-use.h \
-+gnulib/import/stddef.in.h gnulib/import/inttypes.in.h inline-frame.h skip.h \
-+common/common-utils.h common/xml-utils.h common/buffer.h common/ptid.h \
-+common/format.h common/host-defs.h utils.h common/queue.h \
-+common/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
-+gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h common/linux-btrace.h \
-+ctf.h common/i386-cpuid.h common/i386-gcc-cpuid.h target/resume.h \
-+target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h
-+
-+# Header files that already have srcdir in them, or which are in objdir.
-+
-+HFILES_WITH_SRCDIR = ../bfd/bfd.h jit-reader.h
-+
-+
-+# GDB "info" files, which should be included in their entirety
-+INFOFILES = gdb.info*
-+
-+REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
-+
-+# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
-+# default their values the way we do for SER_HARDWIRE; in the future
-+# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
-+# variables analogous to SER_HARDWIRE which get defaulted in this
-+# Makefile.in
-+
-+DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
-+	   $(REMOTE_OBS) $(SIM_OBS)
-+
-+SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
-+# Don't include YYFILES (*.c) because we already include *.y in SFILES,
-+# and it's more useful to see it in the .y file.
-+TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
-+	$(CONFIG_SRCS)
-+TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
-+
-+COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
-+	version.o \
-+	annotate.o \
-+	addrmap.o \
-+	auto-load.o auxv.o \
-+	agent.o \
-+	bfd-target.o \
-+	blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
-+	findvar.o regcache.o cleanups.o \
-+	charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
-+	source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
-+	block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
-+	linespec.o dictionary.o \
-+	infcall.o \
-+	infcmd.o infrun.o \
-+	expprint.o environ.o stack.o thread.o \
-+	exceptions.o \
-+	filesystem.o \
-+	filestuff.o \
-+	inf-child.o \
-+	interps.o \
-+	minidebug.o \
-+	main.o \
-+	macrotab.o macrocmd.o macroexp.o macroscope.o \
-+	mi-common.o \
-+	event-loop.o event-top.o inf-loop.o completer.o \
-+	gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
-+	osabi.o copying.o \
-+	memattr.o mem-break.o target.o target-dcache.o parse.o language.o \
-+	build-id.o buildsym.o \
-+	findcmd.o \
-+	std-regs.o \
-+	signals.o \
-+	exec.o reverse.o \
-+	bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
-+	dbxread.o coffread.o coff-pe-read.o \
-+	dwarf2read.o mipsread.o stabsread.o corefile.o \
-+	dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
-+	ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
-+	ada-tasks.o ada-varobj.o c-varobj.o \
-+	ui-out.o cli-out.o \
-+	varobj.o vec.o \
-+	go-lang.o go-valprint.o go-typeprint.o \
-+	jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \
-+	m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
-+	sentinel-frame.o \
-+	complaints.o typeprint.o \
-+	ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
-+	ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
-+	m2-valprint.o \
-+	serial.o mdebugread.o top.o utils.o \
-+	ui-file.o \
-+	user-regs.o \
-+	frame.o frame-unwind.o doublest.o \
-+	frame-base.o \
-+	inline-frame.o \
-+	gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
-+	cp-namespace.o \
-+	reggroups.o regset.o \
-+	trad-frame.o \
-+	tramp-frame.o \
-+	solib.o solib-target.o \
-+	prologue-value.o memory-map.o memrange.o \
-+	xml-support.o xml-syscall.o xml-utils.o \
-+	target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
-+	inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
-+	gdb_vecs.o jit.o progspace.o skip.o probe.o \
-+	common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
-+	format.o registry.o btrace.o record-btrace.o waitstatus.o
-+
-+TSOBS = inflow.o
-+
-+SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
-+CLEANDIRS = $(SUBDIRS)
-+
-+# List of subdirectories in the build tree that must exist.
-+# This is used to force build failures in existing trees when
-+# a new directory is added.
-+# The format here is for the `case' shell command.
-+REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
-+
-+# For now, shortcut the "configure GDB for fewer languages" stuff.
-+YYFILES = c-exp.c \
-+	cp-name-parser.c \
-+	ada-lex.c \
-+	ada-exp.c \
-+	jv-exp.c \
-+	f-exp.c go-exp.c m2-exp.c p-exp.c
-+YYOBJ = c-exp.o \
-+	cp-name-parser.o \
-+	ada-exp.o \
-+	jv-exp.o \
-+	f-exp.o go-exp.o m2-exp.o p-exp.o
-+
-+# Things which need to be built when making a distribution.
-+
-+DISTSTUFF = $(YYFILES)
-+
-+
-+# All generated files which can be included by another file.
-+generated_files = config.h observer.h observer.inc ada-lex.c jit-reader.h \
-+	$(GNULIB_H) $(NAT_GENERATED_FILES) gcore
-+
-+.c.o:
-+	$(COMPILE) $<
-+	$(POSTCOMPILE)
-+
-+all: gdb$(EXEEXT) $(CONFIG_ALL)
-+	@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
-+
-+installcheck:
-+
-+# The check target can not use subdir_do, because subdir_do does not
-+# use TARGET_FLAGS_TO_PASS.
-+check: force
-+	@if [ -f testsuite/Makefile ]; then \
-+	  rootme=`pwd`; export rootme; \
-+	  rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
-+	  cd testsuite; \
-+	  $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
-+	else true; fi
-+
-+check-perf: force
-+	@if [ -f testsuite/Makefile ]; then \
-+	  rootme=`pwd`; export rootme; \
-+	  rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
-+	  cd testsuite; \
-+	  $(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
-+	else true; fi
-+
-+# The idea is to parallelize testing of multilibs, for example:
-+#   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
-+# will run 3 concurrent sessions of check, eventually testing all 10
-+# combinations.  GNU make is required for the % pattern to work, as is
-+# a shell that expands alternations within braces.  If GNU make is not
-+# used, this rule will harmlessly fail to match.  Used FORCE_PARALLEL to
-+# prevent serialized checking due to the passed RUNTESTFLAGS.
-+# FIXME: use config.status --config not --version, when available.
-+check//%: force
-+	@if [ -f testsuite/config.status ]; then \
-+	  rootme=`pwd`; export rootme; \
-+	  rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
-+	  target=`echo "$@" | sed 's,//.*,,'`; \
-+	  variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
-+	  vardots=`echo "$$variant" | sed 's,/,.,g'`; \
-+	  testdir=testsuite.$$vardots; \
-+	  if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
-+	    configargs=`cd testsuite && ./config.status --version | \
-+	      sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
-+	    $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
-+	    (cd $$testdir && \
-+	     eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
-+			   "\"--srcdir=\$$rootsrc/testsuite\"" \
-+	     ); \
-+	  else :; fi && cd $$testdir && \
-+	  $(MAKE) $(TARGET_FLAGS_TO_PASS) \
-+	    RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
-+	    FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
-+	    "$$target"; \
-+	else true; fi
-+
-+info install-info clean-info dvi pdf install-pdf html install-html: force
-+	@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
-+
-+# Traditionally "install" depends on "all".  But it may be useful
-+# not to; for example, if the user has made some trivial change to a
-+# source file and doesn't care about rebuilding or just wants to save the
-+# time it takes for make to check that all is up to date.
-+# install-only is intended to address that need.
-+install: all
-+	@$(MAKE) $(FLAGS_TO_PASS) install-only
-+
-+install-only: $(CONFIG_INSTALL)
-+	transformed_name=`t='$(program_transform_name)'; \
-+			  echo gdb | sed -e "$$t"` ; \
-+		if test "x$$transformed_name" = x; then \
-+		  transformed_name=gdb ; \
-+		else \
-+		  true ; \
-+		fi ; \
-+		$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
-+		$(INSTALL_PROGRAM) gdb$(EXEEXT) \
-+			$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
-+		$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
-+		$(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
-+	if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
-+	then \
-+	  transformed_name=`t='$(program_transform_name)'; \
-+			    echo gcore | sed -e "$$t"` ; \
-+		  if test "x$$transformed_name" = x; then \
-+		    transformed_name=gcore ; \
-+		  else \
-+		    true ; \
-+		  fi ; \
-+		  $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
-+		  $(INSTALL_SCRIPT) gcore \
-+			  $(DESTDIR)$(bindir)/$$transformed_name; \
-+	fi
-+	@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
-+
-+install-strip:
-+	$(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-+	  `test -z '$(STRIP)' || \
-+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
-+
-+install-python:
-+	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
-+
-+uninstall: force $(CONFIG_UNINSTALL)
-+	transformed_name=`t='$(program_transform_name)'; \
-+			  echo gdb | sed -e $$t` ; \
-+		if test "x$$transformed_name" = x; then \
-+		  transformed_name=gdb ; \
-+		else \
-+		  true ; \
-+		fi ; \
-+		rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
-+		      $(DESTDIR)$(man1dir)/$$transformed_name.1
-+	if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
-+	then \
-+	  transformed_name=`t='$(program_transform_name)'; \
-+			    echo gcore | sed -e "$$t"` ; \
-+		  if test "x$$transformed_name" = x; then \
-+		    transformed_name=gcore ; \
-+		  else \
-+		    true ; \
-+		  fi ; \
-+		  rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
-+	fi
-+	@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
-+
-+# The C++ name parser can be built standalone for testing.
-+test-cp-name-parser.o: cp-name-parser.c
-+	$(COMPILE) -DTEST_CPNAMES cp-name-parser.c
-+	$(POSTCOMPILE)
-+
-+test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
-+	$(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
-+		test-cp-name-parser.o $(LIBIBERTY)
-+
-+# We do this by grepping through sources.  If that turns out to be too slow,
-+# maybe we could just require every .o file to have an initialization routine
-+# of a given name (top.o -> _initialize_top, etc.).
-+#
-+# Formatting conventions:  The name of the _initialize_* routines must start
-+# in column zero, and must not be inside #if.
-+#
-+# Note that the set of files with init functions might change, or the names
-+# of the functions might change, so this files needs to depend on all the
-+# object files that will be linked into gdb.
-+
-+# FIXME: There is a problem with this approach - init.c may force
-+# unnecessary files to be linked in.
-+
-+# FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
-+# the first call is to _initialize_gdbtypes (implemented by explicitly
-+# putting that function's name first in the init.l-tmp file).  This is
-+# a hack to ensure that all the architecture dependant global
-+# builtin_type_* variables are initialized before anything else
-+# (per-architecture code is called in the same order that it is
-+# registered).  The ``correct fix'' is to have all the builtin types
-+# made part of the architecture and initialize them on-demand (using
-+# gdbarch_data) just like everything else.  The catch is that other
-+# modules still take the address of these builtin types forcing them
-+# to be variables, sigh!
-+
-+# NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
-+# anchored on the first column and excludes the ``/'' character so
-+# that it doesn't add the $(srcdir) prefix to any file that already
-+# has an absolute path.  It turns out that $(DEC)'s True64 make
-+# automatically adds the $(srcdir) prefixes when it encounters files
-+# in sub-directories such as cli/ and mi/.
-+
-+# NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
-+# duplicates.  Files in the gdb/ directory can end up appearing in
-+# COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
-+
-+INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
-+init.c: $(INIT_FILES)
-+	@echo Making init.c
-+	@rm -f init.c-tmp init.l-tmp
-+	@touch init.c-tmp
-+	@echo gdbtypes > init.l-tmp
-+	@-LANG=C ; export LANG ; \
-+	LC_ALL=C ; export LC_ALL ; \
-+	echo $(INIT_FILES) | \
-+	tr ' ' '\012' | \
-+	sed \
-+	    -e '/^gdbtypes.[co]$$/d' \
-+	    -e '/^init.[co]$$/d' \
-+	    -e '/xdr_ld.[co]$$/d' \
-+	    -e '/xdr_ptrace.[co]$$/d' \
-+	    -e '/xdr_rdb.[co]$$/d' \
-+	    -e '/udr.[co]$$/d' \
-+	    -e '/udip2soc.[co]$$/d' \
-+	    -e '/udi2go32.[co]$$/d' \
-+	    -e '/version.[co]$$/d' \
-+	    -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
-+	    -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
-+	    -e 's/\.[co]$$/.c/' \
-+	    -e 's,signals\.c,common/signals\.c,' \
-+	    -e 's|^\([^  /][^     ]*\)|$(srcdir)/\1|g' | \
-+	while read f; do \
-+	    sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
-+	done | \
-+	while read f; do \
-+	    case " $$fs " in \
-+	        *" $$f "* ) ;; \
-+	        * ) echo $$f ; fs="$$fs $$f";; \
-+            esac; \
-+	done >> init.l-tmp
-+	@echo '/* Do not modify this file.  */' >>init.c-tmp
-+	@echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
-+	@echo '#include "defs.h"      /* For initialize_file_ftype.  */' >>init.c-tmp
-+	@echo 'extern void initialize_all_files(void);' >>init.c-tmp
-+	@sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
-+	@echo 'void' >>init.c-tmp
-+	@echo 'initialize_all_files (void)' >>init.c-tmp
-+	@echo '{' >>init.c-tmp
-+	@sed -e 's/\(.*\)/  _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
-+	@echo '}' >>init.c-tmp
-+	@rm init.l-tmp
-+	@mv init.c-tmp init.c
-+
-+.PRECIOUS: init.c
-+
-+# Create a library of the gdb object files and build GDB by linking
-+# against that.
-+#
-+# init.o is very important.  It pulls in the rest of GDB.
-+LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
-+libgdb.a: $(LIBGDB_OBS)
-+	-rm -f libgdb.a
-+	$(AR) q libgdb.a $(LIBGDB_OBS)
-+	$(RANLIB) libgdb.a
-+
-+# Removing the old gdb first works better if it is running, at least on SunOS.
-+gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
-+	rm -f gdb$(EXEEXT)
-+	$(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-+		-o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
-+		$(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
-+
-+# Convenience rule to handle recursion.
-+$(LIBGNU) $(GNULIB_H): all-lib
-+all-lib: $(GNULIB_BUILDDIR)/Makefile
-+	@$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
-+.PHONY: all-lib
-+
-+# Convenience rule to handle recursion.
-+.PHONY: all-data-directory
-+all-data-directory: data-directory/Makefile
-+	@$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do
-+
-+# This is useful when debugging GDB, because some Unix's don't let you run GDB
-+# on itself without copying the executable.  So "make gdb1" will make
-+# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
-+# Removing gdb1 before the copy is the right thing if gdb1 is open
-+# in another process.
-+gdb1$(EXEEXT): gdb$(EXEEXT)
-+	rm -f gdb1$(EXEEXT)
-+	cp gdb$(EXEEXT) gdb1$(EXEEXT)
-+
-+# Put the proper machine-specific files first, so M-. on a machine
-+# specific routine gets the one for the correct machine.  (FIXME: those
-+# files go in twice; we should be removing them from the main list).
-+
-+# TAGS depends on all the files that go into it so you can rebuild TAGS
-+# with `make TAGS' and not have to say `rm TAGS' first.
-+
-+GDB_NM_FILE = @GDB_NM_FILE@
-+TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
-+	@echo Making TAGS
-+	etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
-+	`(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
-+		echo $(srcdir)/$$i ; \
-+	done ; for i in $(TAGFILES_WITH_SRCDIR); do \
-+		echo $$i ; \
-+	done) | sed -e 's/\.o$$/\.c/'` \
-+	`find $(srcdir)/config -name '*.h' -print`
-+
-+tags: TAGS
-+
-+clean mostlyclean: $(CONFIG_CLEAN)
-+	@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
-+	rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
-+	rm -f init.c version.c observer.h observer.inc
-+	rm -f gdb$(EXEEXT) core make.log
-+	rm -f gdb[0-9]$(EXEEXT)
-+	rm -f test-cp-name-parser$(EXEEXT)
-+	rm -f xml-builtin.c stamp-xml
-+	rm -f $(DEPDIR)/*
-+
-+# This used to depend on c-exp.c m2-exp.c TAGS
-+# I believe this is wrong; the makefile standards for distclean just
-+# describe removing files; the only sort of "re-create a distribution"
-+# functionality described is if the distributed files are unmodified.
-+# NB: While GDBSERVER might be configured on native systems, it isn't
-+# always included in SUBDIRS.  Remove the gdbserver files explicitly.
-+distclean: clean
-+	@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
-+	rm -rf $(GNULIB_BUILDDIR)
-+	rm -f gdbserver/config.status gdbserver/config.log
-+	rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
-+	rm -f gdbserver/Makefile gdbserver/config.cache
-+	rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
-+	rm -f y.output yacc.acts yacc.tmp y.tab.h
-+	rm -f config.log config.cache
-+	rm -f Makefile
-+	rm -rf $(DEPDIR)
-+
-+maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
-+realclean: maintainer-clean
-+
-+local-maintainer-clean:
-+	@echo "This command is intended for maintainers to use;"
-+	@echo "it deletes files that may require special tools to rebuild."
-+	rm -f c-exp.c \
-+		cp-name-parser.c \
-+		ada-lex.c ada-exp.c \
-+		jv-exp.tab \
-+		f-exp.c go-exp.c m2-exp.c p-exp.c
-+	rm -f TAGS $(INFOFILES)
-+	rm -f $(YYFILES)
-+	rm -f nm.h config.status
-+
-+do-maintainer-clean:
-+	@$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
-+		subdir_do
-+
-+diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
-+	cd doc; $(MAKE) $(MFLAGS) diststuff
-+
-+subdir_do: force
-+	@for i in $(DODIRS); do \
-+		case $$i in \
-+		$(REQUIRED_SUBDIRS)) \
-+			if [ ! -f ./$$i/Makefile ] ; then \
-+				echo "Missing $$i/Makefile" >&2 ; \
-+				exit 1 ; \
-+			fi ;; \
-+		esac ; \
-+		if [ -f ./$$i/Makefile ] ; then \
-+			if (cd ./$$i; \
-+				$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
-+			else exit 1 ; fi ; \
-+		else true ; fi ; \
-+	done
-+
-+Makefile: Makefile.in config.status @frags@
-+	# Regenerate the Makefile and the tm.h / nm.h links.
-+	CONFIG_FILES="Makefile" \
-+	  CONFIG_COMMANDS= \
-+	  CONFIG_HEADERS= \
-+	  $(SHELL) config.status
-+
-+$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status @frags@
-+	@cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
-+	  CONFIG_COMMANDS="depfiles" \
-+	  CONFIG_HEADERS= \
-+	  CONFIG_LINKS= \
-+	  $(SHELL) config.status
-+
-+data-directory/Makefile: data-directory/Makefile.in config.status @frags@
-+	CONFIG_FILES="data-directory/Makefile" \
-+	  CONFIG_COMMANDS="depfiles" \
-+	  CONFIG_HEADERS= \
-+	  CONFIG_LINKS= \
-+	  $(SHELL) config.status
-+
-+.PHONY: run
-+run: Makefile
-+	./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
-+
-+jit-reader.h: $(srcdir)/jit-reader.in
-+	$(SHELL) config.status $@
-+
-+gcore: $(srcdir)/gcore.in
-+	$(SHELL) config.status $@
-+
-+config.h: stamp-h ; @true
-+stamp-h: $(srcdir)/config.in config.status
-+	CONFIG_HEADERS=config.h:config.in \
-+	  CONFIG_COMMANDS="default depdir" \
-+	  CONFIG_FILES= \
-+	  CONFIG_LINKS= \
-+	  $(SHELL) config.status
-+
-+config.status: $(srcdir)/configure configure.tgt configure.host development.sh
-+	$(SHELL) config.status --recheck
-+
-+ACLOCAL = aclocal
-+ACLOCAL_AMFLAGS = -I ../config
-+
-+# Keep these in sync with the includes in acinclude.m4.
-+aclocal_m4_deps = \
-+	configure.ac \
-+	acx_configure_dir.m4 \
-+	libmcheck.m4 \
-+	../bfd/bfd.m4 \
-+	../config/acinclude.m4 \
-+	../config/plugins.m4 \
-+	../config/lead-dot.m4 \
-+	../config/override.m4 \
-+	../config/largefile.m4 \
-+	../config/gettext-sister.m4 \
-+	../config/lib-ld.m4 \
-+	../config/lib-prefix.m4 \
-+	../config/lib-link.m4 \
-+	../config/acx.m4 \
-+	../config/tcl.m4 \
-+	../config/depstand.m4 \
-+	../config/lcmessage.m4 \
-+	../config/codeset.m4 \
-+	../config/zlib.m4
-+
-+$(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
-+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-+
-+AUTOCONF = autoconf
-+configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
-+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
-+	cd $(srcdir) && $(AUTOCONF)
-+
-+AUTOHEADER = autoheader
-+$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
-+	cd $(srcdir) && $(AUTOHEADER)
-+	rm -f stamp-h
-+	touch $@
-+
-+# automatic rebuilding in automake-generated Makefiles requires
-+# this rule in the toplevel Makefile, which, with GNU make, causes
-+# the desired updates through the implicit regeneration of the Makefile
-+# and all of its prerequisites.
-+am--refresh:
-+	@:
-+
-+force:
-+
-+# Documentation!
-+# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
-+doc/refcard.dvi:
-+	cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
-+
-+# GDB QUICK REFERENCE (PostScript output, common PS fonts)
-+doc/refcard.ps:
-+	cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
-+
-+# GDB MANUAL: TeX dvi file
-+doc/gdb.dvi:
-+	cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
-+
-+# GDB MANUAL: info file
-+doc/gdb.info:
-+	cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
-+
-+# Make copying.c from COPYING
-+$(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
-+	awk -f $(srcdir)/copying.awk \
-+		< $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
-+	mv $(srcdir)/copying.tmp $(srcdir)/copying.c
-+
-+version.c: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
-+	$(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
-+	    $(host_alias) $(target_alias) version.c
-+
-+observer.h: observer.sh doc/observer.texi
-+	${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
-+
-+observer.inc: observer.sh doc/observer.texi
-+	${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
-+
-+lint: $(LINTFILES)
-+	$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
-+	   `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
-+
-+gdb.cxref: $(SFILES)
-+	cxref -I. $(SFILES) >gdb.cxref
-+
-+force_update:
-+
-+# GNU Make has an annoying habit of putting *all* the Makefile variables
-+# into the environment, unless you include this target as a circumvention.
-+# Rumor is that this will be fixed (and this target can be removed)
-+# in GNU Make 4.0.
-+.NOEXPORT:
-+
-+# GNU Make 3.63 has a different problem: it keeps tacking command line
-+# overrides onto the definition of $(MAKE).  This variable setting
-+# will remove them.
-+MAKEOVERRIDES=
-+
-+ALLDEPFILES = \
-+	aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
-+	aarch64-linux-nat.c \
-+	aix-thread.c \
-+	alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
-+	alpha-tdep.c alpha-mdebug-tdep.c \
-+	alpha-linux-tdep.c alpha-osf1-tdep.c \
-+	alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
-+	amd64-nat.c amd64-tdep.c \
-+	amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
-+	amd64nbsd-nat.c amd64nbsd-tdep.c \
-+	amd64obsd-nat.c amd64obsd-tdep.c \
-+	amd64-darwin-tdep.c \
-+	amd64-dicos-tdep.c \
-+	amd64-linux-nat.c amd64-linux-tdep.c \
-+	amd64-sol2-tdep.c \
-+	arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
-+	armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
-+	avr-tdep.c \
-+	bfin-linux-tdep.c bfin-tdep.c \
-+	bsd-uthread.c bsd-kvm.c \
-+	core-regset.c \
-+	dcache.c dicos-tdep.c darwin-nat.c \
-+	exec.c \
-+	fbsd-nat.c \
-+	fork-child.c \
-+	glibc-tdep.c \
-+	go32-nat.c h8300-tdep.c \
-+	hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
-+	hppa-linux-tdep.c hppa-linux-nat.c \
-+	hppabsd-nat.c hppabsd-tdep.c \
-+	hppaobsd-tdep.c \
-+	hppanbsd-nat.c hppanbsd-tdep.c \
-+	i386-tdep.c i386-linux-nat.c \
-+	i386v4-nat.c i386-cygwin-tdep.c \
-+	i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
-+	i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
-+	i387-tdep.c \
-+	i386-darwin-tdep.c i386-darwin-nat.c \
-+	i386-dicos-tdep.c \
-+	i386-linux-tdep.c i386-nat.c \
-+	i386-sol2-nat.c i386-sol2-tdep.c \
-+	i386gnu-nat.c i386gnu-tdep.c \
-+	ia64-hpux-nat.c ia64-hpux-tdep.c \
-+	ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
-+	inf-ptrace.c inf-ttrace.c \
-+	irix5-nat.c \
-+	ia64-libunwind-tdep.c \
-+	linux-fork.c \
-+	linux-tdep.c \
-+	linux-record.c \
-+	lm32-tdep.c \
-+	m68hc11-tdep.c \
-+	m32r-tdep.c \
-+	m32r-linux-nat.c m32r-linux-tdep.c \
-+	m68k-tdep.c \
-+	m68kbsd-nat.c m68kbsd-tdep.c \
-+	m68klinux-nat.c m68klinux-tdep.c \
-+	m88k-tdep.c m88kbsd-nat.c \
-+	microblaze-tdep.c microblaze-linux-tdep.c \
-+	mingw-hdep.c \
-+	mips-linux-nat.c mips-linux-tdep.c \
-+	mips-irix-tdep.c \
-+	mips-tdep.c \
-+	mipsnbsd-nat.c mipsnbsd-tdep.c \
-+	mips64obsd-nat.c mips64obsd-tdep.c \
-+	msp430-tdep.c \
-+	nios2-tdep.c nios2-linux-tdep.c \
-+	nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
-+	solib-osf.c \
-+	somread.c solib-som.c \
-+	posix-hdep.c \
-+	ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
-+	ppcfbsd-nat.c ppcfbsd-tdep.c \
-+	ppcnbsd-nat.c ppcnbsd-tdep.c \
-+	ppcobsd-nat.c ppcobsd-tdep.c \
-+	procfs.c \
-+	ravenscar-thread.c \
-+	remote-m32r-sdi.c remote-mips.c \
-+	remote-sim.c \
-+	dcache.c \
-+	rl78-tdep.c \
-+	rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
-+	rs6000-lynx178-tdep.c \
-+	rx-tdep.c \
-+	s390-linux-tdep.c s390-linux-nat.c \
-+	score-tdep.c \
-+	ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
-+	sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
-+	sol2-tdep.c \
-+	solib-irix.c solib-svr4.c \
-+	sparc-linux-nat.c sparc-linux-tdep.c \
-+	sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
-+	sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
-+	sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
-+	sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
-+	sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
-+	sparc-ravenscar-thread.c \
-+	spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
-+	tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
-+	v850-tdep.c \
-+	vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
-+	windows-nat.c windows-tdep.c \
-+	xcoffread.c \
-+	xstormy16-tdep.c \
-+	xtensa-tdep.c xtensa-config.c \
-+	xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
-+
-+# Some files need explicit build rules (due to -Werror problems) or due
-+# to sub-directory fun 'n' games.
-+
-+# FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
-+# errors.  It turns out that that is the least of monitor.c's
-+# problems.  The function print_vsprintf appears to be using
-+# va_arg(long) to extract CORE_ADDR parameters - something that
-+# definitly will not work.  "monitor.c" needs to be rewritten so that
-+# it doesn't use format strings and instead uses callbacks.
-+monitor.o: $(srcdir)/monitor.c
-+	$(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
-+		$(COMPILE.post) $(srcdir)/monitor.c
-+	$(POSTCOMPILE)
-+
-+# Do not try to build "printcmd.c" with -Wformat-nonliteral.  It manually
-+# checks format strings.
-+printcmd.o: $(srcdir)/printcmd.c
-+	$(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
-+		$(COMPILE.post) $(srcdir)/printcmd.c
-+	$(POSTCOMPILE)
-+
-+# ada-exp.c can appear in srcdir, for releases; or in ., for
-+# development builds.
-+ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
-+
-+# Some versions of flex give output that triggers
-+# -Wold-style-definition.
-+ada-exp.o: ada-exp.c
-+	$(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_DEFS) \
-+		$(COMPILE.post) $(ADA_EXP_C)
-+	$(POSTCOMPILE)
-+
-+# Message files.  Based on code in gcc/Makefile.in.
-+
-+# Rules for generating translated message descriptions.  Disabled by
-+# autoconf if the tools are not available.
-+
-+.SUFFIXES: .po .gmo .pox .pot
-+.PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
-+
-+all-po: $(CATALOGS)
-+
-+# This notation should be acceptable to all Make implementations used
-+# by people who are interested in updating .po files.
-+update-po: $(CATALOGS:.gmo=.pox)
-+
-+# N.B. We do not attempt to copy these into $(srcdir).  The snapshot
-+# script does that.
-+.po.gmo:
-+	-test -d po || mkdir po
-+	$(GMSGFMT) --statistics -o $@ $<
-+
-+# The new .po has to be gone over by hand, so we deposit it into
-+# build/po with a different extension.  If build/po/$(PACKAGE).pot
-+# exists, use it (it was just created), else use the one in srcdir.
-+.po.pox:
-+	-test -d po || mkdir po
-+	$(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
-+			then echo po/$(PACKAGE).pot; \
-+			else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
-+
-+# This rule has to look for .gmo modules in both srcdir and the cwd,
-+# and has to check that we actually have a catalog for each language,
-+# in case they weren't built or included with the distribution.
-+install-po:
-+	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
-+	cats="$(CATALOGS)"; for cat in $$cats; do \
-+	  lang=`basename $$cat | sed 's/\.gmo$$//'`; \
-+	  if [ -f $$cat ]; then :; \
-+	  elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
-+	  else continue; \
-+	  fi; \
-+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-+	  echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
-+	  $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
-+	  echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
-+	  $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
-+	done
-+uninstall-po:
-+	cats="$(CATALOGS)"; for cat in $$cats; do \
-+	  lang=`basename $$cat | sed 's/\.gmo$$//'`; \
-+	  if [ -f $$cat ]; then :; \
-+	  elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
-+	  else continue; \
-+	  fi; \
-+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-+	  rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
-+	done
-+# Delete po/*.gmo only if we are not building in the source directory.
-+clean-po:
-+	-if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
-+
-+# Rule for regenerating the message template (gdb.pot).  Instead of
-+# forcing everyone to edit POTFILES.in, which proved impractical, this
-+# rule has no dependencies and always regenerates gdb.pot.  This is
-+# relatively harmless since the .po files do not directly depend on
-+# it.  The .pot file is left in the build directory.  Since GDB's
-+# Makefile lacks a cannonical list of sources (missing xm, tm and nm
-+# files) force this rule.
-+$(PACKAGE).pot: po/$(PACKAGE).pot
-+po/$(PACKAGE).pot: force
-+	-test -d po || mkdir po
-+	sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
-+
-+
-+#
-+# YACC/LEX dependencies
-+#
-+# LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
-+# exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
-+# said LANG-exp.c rather than ./c-exp.c some makes would
-+# sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
-+# decls for malloc/realloc/free which conflict with everything else.
-+# Strictly speaking c-exp.c should therefore depend on
-+# Makefile.in, but that was a pretty big annoyance.
-+
-+.SUFFIXES: .y .l
-+.y.c:
-+	rm -f $@ $@.tmp
-+	$(SHELL) $(YLWRAP) $< y.tab.c $@ -- $(YACC) $(YFLAGS) && mv $@ $@.tmp \
-+		|| (rm -f $@; false)
-+	sed -e '/extern.*malloc/d' \
-+	     -e '/extern.*realloc/d' \
-+	     -e '/extern.*free/d' \
-+	     -e '/include.*malloc.h/d' \
-+	     -e 's/\([^x]\)malloc/\1xmalloc/g' \
-+	     -e 's/\([^x]\)realloc/\1xrealloc/g' \
-+	     -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-+	     -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-+	     -e '/^#line.*y.tab.c/d' \
-+	     -e "s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \
-+	  < $@.tmp > $@
-+	rm -f $@.tmp
-+.l.c:
-+	if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
-+	    $(FLEX) -o$@ $< && \
-+	    rm -f $@.new && \
-+	    sed -e '/extern.*malloc/d' \
-+	        -e '/extern.*realloc/d' \
-+	        -e '/extern.*free/d' \
-+	        -e '/include.*malloc.h/d' \
-+	        -e 's/\([^x]\)malloc/\1xmalloc/g' \
-+	        -e 's/\([^x]\)realloc/\1xrealloc/g' \
-+	        -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-+	        -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-+		-e 's/yy_flex_xrealloc/yyxrealloc/g' \
-+	      < $@ > $@.new && \
-+	    rm -f $@ && \
-+	    mv $@.new $@; \
-+	elif [ -f $@ ]; then \
-+	    echo "Warning: $*.c older than $*.l and flex not available."; \
-+	else \
-+	    echo "$@ missing and flex not available."; \
-+	    false; \
-+	fi
-+
-+.PRECIOUS: ada-lex.c
-+
-+# XML rules
-+
-+xml-builtin.c: stamp-xml; @true
-+stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
-+	rm -f xml-builtin.tmp
-+	AWK="$(AWK)" \
-+	  $(SHELL) $(srcdir)/features/feature_to_c.sh \
-+	  xml-builtin.tmp $(XMLFILES)
-+	$(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
-+	echo stamp > stamp-xml
-+
-+.PRECIOUS: xml-builtin.c
-+
-+#
-+# gdb/cli/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+cli-cmds.o: $(srcdir)/cli/cli-cmds.c
-+	$(COMPILE) $(srcdir)/cli/cli-cmds.c
-+	$(POSTCOMPILE)
-+
-+cli-decode.o: $(srcdir)/cli/cli-decode.c
-+	$(COMPILE) $(srcdir)/cli/cli-decode.c
-+	$(POSTCOMPILE)
-+
-+cli-dump.o: $(srcdir)/cli/cli-dump.c
-+	$(COMPILE) $(srcdir)/cli/cli-dump.c
-+	$(POSTCOMPILE)
-+
-+cli-interp.o: $(srcdir)/cli/cli-interp.c
-+	$(COMPILE) $(srcdir)/cli/cli-interp.c
-+	$(POSTCOMPILE)
-+
-+cli-logging.o: $(srcdir)/cli/cli-logging.c
-+	$(COMPILE) $(srcdir)/cli/cli-logging.c
-+	$(POSTCOMPILE)
-+
-+cli-script.o: $(srcdir)/cli/cli-script.c
-+	$(COMPILE) $(srcdir)/cli/cli-script.c
-+	$(POSTCOMPILE)
-+
-+cli-setshow.o: $(srcdir)/cli/cli-setshow.c
-+	$(COMPILE) $(srcdir)/cli/cli-setshow.c
-+	$(POSTCOMPILE)
-+
-+cli-utils.o: $(srcdir)/cli/cli-utils.c
-+	$(COMPILE) $(srcdir)/cli/cli-utils.c
-+	$(POSTCOMPILE)
-+
-+
-+#
-+# GDBTK sub-directory
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the mi directory.
-+
-+all-gdbtk: insight$(EXEEXT)
-+
-+install-gdbtk:
-+	transformed_name=`t='$(program_transform_name)'; \
-+		  echo insight | sed -e $$t` ; \
-+	if test "x$$transformed_name" = x; then \
-+	  transformed_name=insight ; \
-+	else \
-+	  true ; \
-+	fi ; \
-+	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
-+	$(INSTALL_PROGRAM) insight$(EXEEXT) \
-+		$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
-+	$(SHELL) $(srcdir)/../mkinstalldirs \
-+		$(DESTDIR)$(GDBTK_LIBRARY) ; \
-+	$(SHELL) $(srcdir)/../mkinstalldirs \
-+		$(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
-+	$(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
-+		$(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
-+	$(SHELL) $(srcdir)/../mkinstalldirs \
-+		$(DESTDIR)$(GDBTK_LIBRARY)/images \
-+		$(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
-+	$(SHELL) $(srcdir)/../mkinstalldirs \
-+		$(DESTDIR)$(GDBTK_LIBRARY)/help \
-+		$(DESTDIR)$(GDBTK_LIBRARY)/help/images \
-+		$(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
-+	cd $(srcdir)/gdbtk/library ; \
-+	for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
-+	  do \
-+		$(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
-+	  done ;
-+
-+uninstall-gdbtk:
-+	transformed_name=`t='$(program_transform_name)'; \
-+		  echo insight | sed -e $$t` ; \
-+	if test "x$$transformed_name" = x; then \
-+		transformed_name=insight ; \
-+	else \
-+		true ; \
-+	fi ; \
-+	rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
-+	rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
-+
-+clean-gdbtk:
-+	rm -f insight$(EXEEXT)
-+
-+# Removing the old gdb first works better if it is running, at least on SunOS.
-+insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
-+		$(CDEPS) $(TDEPLIBS)
-+	rm -f insight$(EXEEXT)
-+	$(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-+		-o insight$(EXEEXT) gdbtk-main.o libgdb.a \
-+		$(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
-+
-+gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
-+	$(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
-+
-+all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
-+		$(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
-+		$(GDBTK_CFLAGS) \
-+		-DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
-+		-DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
-+
-+gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
-+	$(POSTCOMPILE)
-+
-+gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
-+	$(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
-+	$(POSTCOMPILE)
-+
-+
-+#
-+# gdb/mi/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-break.c
-+	$(POSTCOMPILE)
-+
-+mi-cmd-catch.o: $(srcdir)/mi/mi-cmd-catch.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-catch.c
-+	$(POSTCOMPILE)
-+
-+mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
-+	$(POSTCOMPILE)
-+
-+mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-env.c
-+	$(POSTCOMPILE)
-+
-+mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-file.c
-+	$(POSTCOMPILE)
-+
-+mi-cmd-info.o: $(srcdir)/mi/mi-cmd-info.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-info.c
-+	$(POSTCOMPILE)
-+
-+mi-cmds.o: $(srcdir)/mi/mi-cmds.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmds.c
-+	$(POSTCOMPILE)
-+
-+mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
-+	$(POSTCOMPILE)
-+
-+mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-target.c
-+	$(POSTCOMPILE)
-+
-+mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
-+	$(COMPILE) $(srcdir)/mi/mi-cmd-var.c
-+	$(POSTCOMPILE)
-+
-+mi-console.o: $(srcdir)/mi/mi-console.c
-+	$(COMPILE) $(srcdir)/mi/mi-console.c
-+	$(POSTCOMPILE)
-+
-+mi-getopt.o: $(srcdir)/mi/mi-getopt.c
-+	$(COMPILE) $(srcdir)/mi/mi-getopt.c
-+	$(POSTCOMPILE)
-+
-+mi-interp.o: $(srcdir)/mi/mi-interp.c
-+	$(COMPILE) $(srcdir)/mi/mi-interp.c
-+	$(POSTCOMPILE)
-+
-+mi-main.o: $(srcdir)/mi/mi-main.c
-+	$(COMPILE) $(srcdir)/mi/mi-main.c
-+	$(POSTCOMPILE)
-+
-+mi-out.o: $(srcdir)/mi/mi-out.c
-+	$(COMPILE) $(srcdir)/mi/mi-out.c
-+	$(POSTCOMPILE)
-+
-+mi-parse.o: $(srcdir)/mi/mi-parse.c
-+	$(COMPILE) $(srcdir)/mi/mi-parse.c
-+	$(POSTCOMPILE)
-+
-+mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
-+	$(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
-+	$(POSTCOMPILE)
-+
-+mi-common.o: $(srcdir)/mi/mi-common.c
-+	$(COMPILE) $(srcdir)/mi/mi-common.c
-+	$(POSTCOMPILE)
-+
-+# gdb/common/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+signals.o: $(srcdir)/common/signals.c
-+	$(COMPILE) $(srcdir)/common/signals.c
-+	$(POSTCOMPILE)
-+
-+common-utils.o: ${srcdir}/common/common-utils.c
-+	$(COMPILE) $(srcdir)/common/common-utils.c
-+	$(POSTCOMPILE)
-+
-+gdb_vecs.o: ${srcdir}/common/gdb_vecs.c
-+	$(COMPILE) $(srcdir)/common/gdb_vecs.c
-+	$(POSTCOMPILE)
-+
-+xml-utils.o: ${srcdir}/common/xml-utils.c
-+	$(COMPILE) $(srcdir)/common/xml-utils.c
-+	$(POSTCOMPILE)
-+
-+ptid.o: ${srcdir}/common/ptid.c
-+	$(COMPILE) $(srcdir)/common/ptid.c
-+	$(POSTCOMPILE)
-+
-+buffer.o: ${srcdir}/common/buffer.c
-+	$(COMPILE) $(srcdir)/common/buffer.c
-+	$(POSTCOMPILE)
-+
-+filestuff.o: $(srcdir)/common/filestuff.c
-+	$(COMPILE) $(srcdir)/common/filestuff.c
-+	$(POSTCOMPILE)
-+
-+format.o: ${srcdir}/common/format.c
-+	$(COMPILE) $(srcdir)/common/format.c
-+	$(POSTCOMPILE)
-+
-+linux-osdata.o: ${srcdir}/common/linux-osdata.c
-+	$(COMPILE) $(srcdir)/common/linux-osdata.c
-+	$(POSTCOMPILE)
-+
-+linux-procfs.o: $(srcdir)/common/linux-procfs.c
-+	$(COMPILE) $(srcdir)/common/linux-procfs.c
-+	$(POSTCOMPILE)
-+
-+linux-ptrace.o: $(srcdir)/common/linux-ptrace.c
-+	$(COMPILE) $(srcdir)/common/linux-ptrace.c
-+	$(POSTCOMPILE)
-+
-+common-agent.o: $(srcdir)/common/agent.c
-+	$(COMPILE) $(srcdir)/common/agent.c
-+	$(POSTCOMPILE)
-+
-+vec.o: ${srcdir}/common/vec.c
-+	$(COMPILE) $(srcdir)/common/vec.c
-+	$(POSTCOMPILE)
-+
-+linux-btrace.o: ${srcdir}/common/linux-btrace.c
-+	$(COMPILE) $(srcdir)/common/linux-btrace.c
-+	$(POSTCOMPILE)
-+
-+mips-linux-watch.o: ${srcdir}/common/mips-linux-watch.c
-+	$(COMPILE) $(srcdir)/common/mips-linux-watch.c
-+	$(POSTCOMPILE)
-+
-+#
-+# gdb/target/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+waitstatus.o: ${srcdir}/target/waitstatus.c
-+	$(COMPILE) $(srcdir)/target/waitstatus.c
-+	$(POSTCOMPILE)
-+
-+# gdb/nat/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+linux-waitpid.o: ${srcdir}/nat/linux-waitpid.c
-+	$(COMPILE) $(srcdir)/nat/linux-waitpid.c
-+	$(POSTCOMPILE)
-+
-+#
-+# gdb/tui/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+tui.o: $(srcdir)/tui/tui.c
-+	$(COMPILE) $(srcdir)/tui/tui.c
-+	$(POSTCOMPILE)
-+
-+tui-command.o: $(srcdir)/tui/tui-command.c
-+	$(COMPILE) $(srcdir)/tui/tui-command.c
-+	$(POSTCOMPILE)
-+
-+tui-data.o: $(srcdir)/tui/tui-data.c
-+	$(COMPILE) $(srcdir)/tui/tui-data.c
-+	$(POSTCOMPILE)
-+
-+tui-disasm.o: $(srcdir)/tui/tui-disasm.c
-+	$(COMPILE) $(srcdir)/tui/tui-disasm.c
-+	$(POSTCOMPILE)
-+
-+tui-file.o: $(srcdir)/tui/tui-file.c
-+	$(COMPILE) $(srcdir)/tui/tui-file.c
-+	$(POSTCOMPILE)
-+
-+tui-hooks.o: $(srcdir)/tui/tui-hooks.c
-+	$(COMPILE) $(srcdir)/tui/tui-hooks.c
-+	$(POSTCOMPILE)
-+
-+tui-interp.o: $(srcdir)/tui/tui-interp.c
-+	$(COMPILE) $(srcdir)/tui/tui-interp.c
-+	$(POSTCOMPILE)
-+
-+tui-io.o: $(srcdir)/tui/tui-io.c
-+	$(COMPILE) $(srcdir)/tui/tui-io.c
-+	$(POSTCOMPILE)
-+
-+tui-layout.o: $(srcdir)/tui/tui-layout.c
-+	$(COMPILE) $(srcdir)/tui/tui-layout.c
-+	$(POSTCOMPILE)
-+
-+tui-out.o: $(srcdir)/tui/tui-out.c
-+	$(COMPILE) $(srcdir)/tui/tui-out.c
-+	$(POSTCOMPILE)
-+
-+tui-regs.o: $(srcdir)/tui/tui-regs.c
-+	$(COMPILE) $(srcdir)/tui/tui-regs.c
-+	$(POSTCOMPILE)
-+
-+tui-source.o: $(srcdir)/tui/tui-source.c
-+	$(COMPILE) $(srcdir)/tui/tui-source.c
-+	$(POSTCOMPILE)
-+
-+tui-stack.o: $(srcdir)/tui/tui-stack.c
-+	$(COMPILE) $(srcdir)/tui/tui-stack.c
-+	$(POSTCOMPILE)
-+
-+tui-win.o: $(srcdir)/tui/tui-win.c
-+	$(COMPILE) $(srcdir)/tui/tui-win.c
-+	$(POSTCOMPILE)
-+
-+tui-windata.o: $(srcdir)/tui/tui-windata.c
-+	$(COMPILE) $(srcdir)/tui/tui-windata.c
-+	$(POSTCOMPILE)
-+
-+tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
-+	$(COMPILE) $(srcdir)/tui/tui-wingeneral.c
-+	$(POSTCOMPILE)
-+
-+tui-winsource.o: $(srcdir)/tui/tui-winsource.c
-+	$(COMPILE) $(srcdir)/tui/tui-winsource.c
-+	$(POSTCOMPILE)
-+
-+#
-+# gdb/python/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+# Flags needed to compile Python code
-+PYTHON_CFLAGS=@PYTHON_CFLAGS@
-+
-+python.o: $(srcdir)/python/python.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
-+	$(POSTCOMPILE)
-+
-+py-arch.o: $(srcdir)/python/py-arch.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-arch.c
-+	$(POSTCOMPILE)
-+
-+py-auto-load.o: $(srcdir)/python/py-auto-load.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-auto-load.c
-+	$(POSTCOMPILE)
-+
-+py-block.o: $(srcdir)/python/py-block.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
-+	$(POSTCOMPILE)
-+
-+py-bpevent.o: $(srcdir)/python/py-bpevent.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-bpevent.c
-+	$(POSTCOMPILE)
-+
-+py-breakpoint.o: $(srcdir)/python/py-breakpoint.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c
-+	$(POSTCOMPILE)
-+
-+py-cmd.o: $(srcdir)/python/py-cmd.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
-+	$(POSTCOMPILE)
-+
-+py-continueevent.o: $(srcdir)/python/py-continueevent.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-continueevent.c
-+	$(POSTCOMPILE)
-+
-+py-event.o: $(srcdir)/python/py-event.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-event.c
-+	$(POSTCOMPILE)
-+
-+py-evtregistry.o: $(srcdir)/python/py-evtregistry.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evtregistry.c
-+	$(POSTCOMPILE)
-+
-+py-evts.o: $(srcdir)/python/py-evts.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evts.c
-+	$(POSTCOMPILE)
-+
-+py-exitedevent.o: $(srcdir)/python/py-exitedevent.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-exitedevent.c
-+	$(POSTCOMPILE)
-+
-+py-finishbreakpoint.o: $(srcdir)/python/py-finishbreakpoint.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-finishbreakpoint.c
-+	$(POSTCOMPILE)
-+
-+py-frame.o: $(srcdir)/python/py-frame.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
-+	$(POSTCOMPILE)
-+
-+py-framefilter.o: $(srcdir)/python/py-framefilter.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-framefilter.c
-+	$(POSTCOMPILE)
-+
-+py-function.o: $(srcdir)/python/py-function.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c
-+	$(POSTCOMPILE)
-+
-+py-gdb-readline.o: $(srcdir)/python/py-gdb-readline.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-gdb-readline.c
-+	$(POSTCOMPILE)
-+
-+py-inferior.o: $(srcdir)/python/py-inferior.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-inferior.c
-+	$(POSTCOMPILE)
-+
-+py-infthread.o: $(srcdir)/python/py-infthread.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infthread.c
-+	$(POSTCOMPILE)
-+
-+py-lazy-string.o: $(srcdir)/python/py-lazy-string.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c
-+	$(POSTCOMPILE)
-+
-+py-linetable.o: $(srcdir)/python/py-linetable.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-linetable.c
-+	$(POSTCOMPILE)
-+
-+py-newobjfileevent.o: $(srcdir)/python/py-newobjfileevent.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-newobjfileevent.c
-+	$(POSTCOMPILE)
-+
-+py-objfile.o: $(srcdir)/python/py-objfile.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c
-+	$(POSTCOMPILE)
-+
-+py-param.o: $(srcdir)/python/py-param.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-param.c
-+	$(POSTCOMPILE)
-+
-+py-prettyprint.o: $(srcdir)/python/py-prettyprint.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c
-+	$(POSTCOMPILE)
-+
-+py-progspace.o: $(srcdir)/python/py-progspace.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-progspace.c
-+	$(POSTCOMPILE)
-+
-+py-signalevent.o: $(srcdir)/python/py-signalevent.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-signalevent.c
-+	$(POSTCOMPILE)
-+
-+py-stopevent.o: $(srcdir)/python/py-stopevent.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-stopevent.c
-+	$(POSTCOMPILE)
-+
-+py-symbol.o: $(srcdir)/python/py-symbol.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
-+	$(POSTCOMPILE)
-+
-+py-symtab.o: $(srcdir)/python/py-symtab.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
-+	$(POSTCOMPILE)
-+
-+py-threadevent.o: $(srcdir)/python/py-threadevent.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-threadevent.c
-+	$(POSTCOMPILE)
-+
-+py-type.o: $(srcdir)/python/py-type.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
-+	$(POSTCOMPILE)
-+
-+py-utils.o: $(srcdir)/python/py-utils.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
-+	$(POSTCOMPILE)
-+
-+py-value.o: $(srcdir)/python/py-value.c
-+	$(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
-+	$(POSTCOMPILE)
-+
-+#
-+# Dependency tracking.  Most of this is conditional on GNU Make being
-+# found by configure; if GNU Make is not found, we fall back to a
-+# simpler scheme.
-+#
-+
-+@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
-+# Note that we put the dependencies into a .Tpo file, then move them
-+# into place if the compile succeeds.  We need this because gcc does
-+# not atomically write the dependency output file.
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@else
-+@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
-+@GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-+# depcomp handles atomicity for us, so we don't need a postcompile
-+# step.
-+@GMAKE_TRUE@override POSTCOMPILE =
-+@GMAKE_TRUE@endif
-+
-+# A list of all the objects we might care about in this build, for
-+# dependency tracking.
-+all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
-+	test-cp-name-parser.o
-+
-+# Ensure that generated files are created early.  Use order-only
-+# dependencies if available.  They require GNU make 3.80 or newer,
-+# and the .VARIABLES variable was introduced at the same time.
-+@GMAKE_TRUE@ifdef .VARIABLES
-+@GMAKE_TRUE@$(all_object_files): | $(generated_files)
-+@GMAKE_TRUE@else
-+$(all_object_files) : $(generated_files)
-+@GMAKE_TRUE@endif
-+
-+# Dependencies.
-+@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
-+
-+### end of the gdb Makefile.in.
-diff -Nbaur gdb-7.7/sim/common/Make-common.in gdb-7.7-arm/sim/common/Make-common.in
---- gdb-7.7/sim/common/Make-common.in	2014-01-08 09:23:36.000000000 +0000
-+++ gdb-7.7-arm/sim/common/Make-common.in	2014-02-16 19:43:34.000000000 +0000
-@@ -415,10 +415,8 @@
- # Note that we put the dependencies into a .Tpo file, then move them
- # into place if the compile succeeds.  We need this because gcc does
- # not atomically write the dependency output file.
--@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
--@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
--@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
--@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@
-+@GMAKE_TRUE@override POSTCOMPILE =
- @GMAKE_TRUE@else
- @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
- @GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.7/sim/common/Make-common.in.orig gdb-7.7-arm/sim/common/Make-common.in.orig
---- gdb-7.7/sim/common/Make-common.in.orig	1970-01-01 01:00:00.000000000 +0100
-+++ gdb-7.7-arm/sim/common/Make-common.in.orig	2014-01-08 09:23:36.000000000 +0000
-@@ -0,0 +1,625 @@
-+# Makefile fragment for common parts of all simulators.
-+# Copyright 1997-2014 Free Software Foundation, Inc.
-+# Contributed by Cygnus Support.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 3 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+
-+# This Makefile fragment consists of two separate parts.
-+# They are merged into the final Makefile at points denoted by
-+# "## COMMON_PRE_CONFIG_FRAG" and "## COMMON_POST_CONFIG_FRAG".
-+#
-+# The target Makefile should look like:
-+#
-+#># Copyright blah blah
-+#>
-+#>## COMMON_PRE_CONFIG_FRAG
-+#>
-+#># Any overrides necessary for the SIM_FOO config vars.
-+#>SIM_FOO = ...
-+#>
-+#>## COMMON_POST_CONFIG_FRAG
-+#>
-+#># Rules to build target specific .o's.
-+
-+## COMMON_PRE_CONFIG_FRAG
-+
-+VPATH = @srcdir@:$(srccom)
-+srcdir = @srcdir@
-+srccom = $(srcdir)/../common
-+srcroot = $(srcdir)/../..
-+srcsim = $(srcdir)/..
-+
-+prefix = @prefix@
-+exec_prefix = @exec_prefix@
-+
-+host_alias = @host_alias@
-+target_alias = @target_alias@
-+program_transform_name = @program_transform_name@
-+bindir = @bindir@
-+
-+libdir = @libdir@
-+tooldir = $(libdir)/$(target_alias)
-+
-+datadir = @datadir@
-+datarootdir = @datarootdir@
-+mandir = @mandir@
-+man1dir = $(mandir)/man1
-+infodir = @infodir@
-+includedir = @includedir@
-+
-+lt_cv_dlopen_libs = @lt_cv_dlopen_libs@
-+# This can be referenced by the gettext configuration code.
-+top_builddir = ..
-+
-+EXEEXT = @EXEEXT@
-+SHELL = @SHELL@
-+
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+INSTALL_DATA = @INSTALL_DATA@
-+
-+CC = @CC@
-+CC_FOR_BUILD = @CC_FOR_BUILD@
-+CFLAGS = @CFLAGS@
-+SIM_BSWAP = @sim_bswap@
-+SIM_CFLAGS = @sim_cflags@
-+SIM_DEBUG = @sim_debug@
-+SIM_TRACE = @sim_trace@
-+SIM_PROFILE = @sim_profile@
-+
-+SIM_ASSERT = @sim_assert@
-+SIM_ALIGNMENT = @sim_alignment@
-+SIM_BITSIZE = @sim_bitsize@
-+SIM_DEFAULT_MODEL = @sim_default_model@
-+SIM_ENDIAN = @sim_endian@
-+SIM_ENVIRONMENT = @sim_environment@
-+SIM_FLOAT = @sim_float@
-+SIM_HW_CFLAGS = @sim_hw_cflags@
-+SIM_HW_OBJS = @sim_hw_objs@
-+SIM_HW = @sim_hw@
-+SIM_HOSTENDIAN = @sim_hostendian@
-+SIM_INLINE = @sim_inline@
-+SIM_PACKAGES = @sim_packages@
-+SIM_REGPARM = @sim_regparm@
-+SIM_RESERVED_BITS = @sim_reserved_bits@
-+SIM_SCACHE = @sim_scache@
-+SIM_SMP = @sim_smp@
-+SIM_STDCALL = @sim_stdcall@
-+SIM_XOR_ENDIAN = @sim_xor_endian@
-+WARN_CFLAGS = @WARN_CFLAGS@
-+WERROR_CFLAGS = @WERROR_CFLAGS@
-+SIM_WARN_CFLAGS = $(WARN_CFLAGS)
-+SIM_WERROR_CFLAGS = $(WERROR_CFLAGS)
-+
-+HDEFINES = @HDEFINES@
-+TDEFINES =
-+
-+AR = @AR@
-+AR_FLAGS = rc
-+RANLIB = @RANLIB@
-+MAKEINFO = makeinfo
-+
-+# Dependency tracking information.
-+DEPMODE = @CCDEPMODE@
-+DEPDIR = @DEPDIR@
-+depcomp = $(SHELL) $(srcroot)/depcomp
-+
-+# Note that these are overridden by GNU make-specific code below if
-+# GNU make is used.  The overrides implement dependency tracking.
-+COMPILE.pre = $(CC)
-+COMPILE.post = -c -o $@
-+COMPILE = $(COMPILE.pre) $(ALL_CFLAGS) $(COMPILE.post)
-+POSTCOMPILE = @true
-+
-+# Each simulator's Makefile.in defines one or more of these variables
-+# to override our settings as necessary.  There is no need to define these
-+# in the simulator's Makefile.in if one is using the default value.  In fact
-+# it's preferable not to.
-+
-+# List of object files, less common parts.
-+SIM_OBJS =
-+# List of extra dependencies.
-+# Generally this consists of simulator specific files included by sim-main.h.
-+SIM_EXTRA_DEPS =
-+# List of flags to always pass to $(CC).
-+SIM_EXTRA_CFLAGS =
-+# List of extra libraries to link with.
-+SIM_EXTRA_LIBS =
-+# List of extra program dependencies.
-+SIM_EXTRA_LIBDEPS =
-+# List of main object files for `run'.
-+SIM_RUN_OBJS = run.o
-+# Dependency of `all' to build any extra files.
-+SIM_EXTRA_ALL =
-+# Dependency of `install' to install any extra files.
-+SIM_EXTRA_INSTALL =
-+# Dependency of `clean' to clean any extra files.
-+SIM_EXTRA_CLEAN =
-+# Likewise `distclean'
-+SIM_EXTRA_DISTCLEAN =
-+
-+# Every time a new general purpose source file was added every target's
-+# Makefile.in needed to be updated to include the file in SIM_OBJS.
-+# This doesn't scale.
-+# This variable specifies all the generic stuff common to the newer simulators.
-+# Things like sim-reason.o can't go here as the cpu may provide its own
-+# (though hopefully in time that won't be so).  Things like sim-bits.o can go
-+# here.  Some files are used by all simulators (e.g. callback.o).
-+# Those files are specified in LIB_OBJS below.
-+
-+SIM_COMMON_HW_OBJS = \
-+	hw-alloc.o \
-+	hw-base.o \
-+	hw-device.o \
-+	hw-events.o \
-+	hw-handles.o \
-+	hw-instances.o \
-+	hw-ports.o \
-+	hw-properties.o \
-+	hw-tree.o \
-+	sim-hw.o \
-+
-+SIM_NEW_COMMON_OBJS = \
-+	sim-arange.o \
-+	sim-bits.o \
-+	sim-command.o \
-+	sim-config.o \
-+	sim-core.o \
-+	sim-endian.o \
-+	sim-events.o \
-+	sim-fpu.o \
-+	sim-io.o \
-+	sim-info.o \
-+	sim-load.o \
-+	sim-memopt.o \
-+	sim-module.o \
-+	sim-options.o \
-+	sim-profile.o \
-+	sim-signal.o \
-+	sim-trace.o \
-+	sim-utils.o \
-+	sim-watch.o \
-+	\
-+	$(SIM_HW_OBJS) \
-+
-+# cgen-sim.h and the headers it includes
-+CGEN_SIM_DEPS = \
-+	$(srccom)/cgen-sim.h \
-+	$(srccom)/cgen-defs.h \
-+	$(srccom)/cgen-scache.h \
-+	$(srccom)/cgen-fpu.h \
-+	$(srccom)/cgen-par.h \
-+	$(srccom)/cgen-cpu.h \
-+	$(srccom)/cgen-trace.h \
-+	cpuall.h
-+
-+# Add this to SIM_EXTRA_DEPS.
-+CGEN_INCLUDE_DEPS = \
-+	$(CGEN_SIM_DEPS) \
-+	$(srccom)/cgen-engine.h \
-+	$(srccom)/cgen-types.h \
-+	$(srcdir)/../../include/opcode/cgen.h
-+
-+## End COMMON_PRE_CONFIG_FRAG
-+
-+## COMMON_POST_CONFIG_FRAG
-+
-+CONFIG_CFLAGS = \
-+	@DEFS@ \
-+	$(SIM_CFLAGS) \
-+	$(SIM_DEBUG) \
-+	$(SIM_DEFAULT_MODEL) \
-+	$(SIM_TRACE) \
-+	$(SIM_PROFILE) \
-+	$(SIM_BSWAP) \
-+	$(SIM_ASSERT) \
-+	$(SIM_ALIGNMENT) \
-+	$(SIM_BITSIZE) \
-+	$(SIM_ENDIAN) \
-+	$(SIM_ENVIRONMENT) \
-+	$(SIM_FLOAT) \
-+	$(SIM_HW_CFLAGS) \
-+	$(SIM_HOSTENDIAN) \
-+	$(SIM_INLINE) \
-+	$(SIM_PACKAGES) \
-+	$(SIM_REGPARM) \
-+	$(SIM_RESERVED_BITS) \
-+	$(SIM_SCACHE) \
-+	$(SIM_SMP) \
-+	$(SIM_STDCALL) \
-+	$(SIM_WARN_CFLAGS) \
-+	$(SIM_WERROR_CFLAGS) \
-+	$(SIM_XOR_ENDIAN) \
-+	$(SIM_HARDWARE) \
-+	$(SIM_EXTRA_CFLAGS) \
-+	$(HDEFINES) $(TDEFINES)
-+CSEARCH = -I. -I$(srcdir) -I../common -I$(srccom) \
-+  -I../../include -I$(srcroot)/include \
-+  -I../../bfd -I$(srcroot)/bfd \
-+  -I../../opcodes -I$(srcroot)/opcodes \
-+  @INCINTL@
-+ALL_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH) $(CFLAGS)
-+BUILD_CFLAGS = -g -O $(CSEARCH)
-+
-+COMMON_DEP_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH)
-+
-+LIBIBERTY_LIB = ../../libiberty/libiberty.a
-+BFD_LIB = ../../bfd/libbfd.a
-+@PLUGINS_TRUE@LIBDL = @lt_cv_dlopen_libs@
-+OPCODES_LIB = ../../opcodes/libopcodes.a
-+LIBINTL = @LIBINTL@
-+LIBINTL_DEP = @LIBINTL_DEP@
-+CONFIG_LIBS = @LIBS@
-+LIBDEPS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL_DEP) $(LIBIBERTY_LIB) \
-+	$(SIM_EXTRA_LIBDEPS)
-+EXTRA_LIBS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL) $(LIBIBERTY_LIB) \
-+	$(CONFIG_LIBS) $(SIM_EXTRA_LIBS) $(LIBDL)
-+
-+LIB_OBJS = callback.o syscall.o targ-map.o version.o $(SIM_OBJS)
-+
-+RUNTESTFLAGS =
-+
-+callback_h = $(srcroot)/include/gdb/callback.h
-+remote_sim_h = $(srcroot)/include/gdb/remote-sim.h
-+
-+all: $(SIM_EXTRA_ALL) libsim.a run$(EXEEXT) .gdbinit
-+
-+libsim.a: $(LIB_OBJS)
-+	rm -f libsim.a
-+	$(AR) $(AR_FLAGS) libsim.a $(LIB_OBJS)
-+	$(RANLIB) libsim.a
-+
-+run$(EXEEXT): $(SIM_RUN_OBJS) libsim.a $(LIBDEPS)
-+	$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o run$(EXEEXT) \
-+	  $(SIM_RUN_OBJS) libsim.a $(EXTRA_LIBS)
-+
-+# FIXME: Ideally, callback.o and friends live in a library outside of
-+# both the gdb and simulator source trees (e.g. devo/remote.  Not
-+# devo/libremote because this directory would contain more than just
-+# a library).
-+
-+gentmap: Makefile $(srccom)/gentmap.c targ-vals.def
-+	$(CC_FOR_BUILD) $(srccom)/gentmap.c -o gentmap $(BUILD_CFLAGS) $(NL_TARGET)
-+
-+targ-vals.h targ-map.c: stamp-tvals
-+stamp-tvals: gentmap
-+	rm -f tmp-tvals.h tmp-tmap.c
-+	./gentmap -h >tmp-tvals.h
-+	$(SHELL) $(srcroot)/move-if-change tmp-tvals.h targ-vals.h
-+	./gentmap -c >tmp-tmap.c
-+	$(SHELL) $(srcroot)/move-if-change tmp-tmap.c targ-map.c
-+	touch stamp-tvals
-+
-+version.c: Makefile $(srccom)/create-version.sh ../../bfd/version.h ../../gdb/version.in
-+	$(SHELL) $(srccom)/create-version.sh $(srcsim) $(host_alias) $(target_alias) version.c
-+
-+#
-+# Rules for building sim-* components.  Triggered by listing the corresponding
-+# .o file in the list of simulator targets.
-+#
-+
-+sim_main_headers = \
-+	sim-main.h \
-+	$(sim-assert_h) \
-+	$(sim-base_h) \
-+	$(sim-cpu_h) \
-+	$(sim-engine_h) \
-+	$(sim-events_h) \
-+	$(sim-memopt_h) \
-+	$(sim-model_h) \
-+	$(sim-module_h) \
-+	$(sim-profile_h) \
-+	$(sim-trace_h) \
-+	$(sim-watch_h) \
-+	$(sim-basics_h) \
-+	$(SIM_EXTRA_DEPS)
-+
-+# Exported version of sim_main_headers.
-+SIM_MAIN_DEPS = \
-+	$(sim_main_headers)
-+
-+sim-alu_h = $(srccom)/sim-alu.h
-+sim-arange_h = $(srccom)/sim-arange.h \
-+		$(srccom)/sim-arange.c
-+sim-assert_h = $(srccom)/sim-assert.h
-+sim-base_h = $(srccom)/sim-base.h \
-+		$(sim-module_h) \
-+		$(sim-trace_h) \
-+		$(sim-core_h) \
-+		$(sim-events_h) \
-+		$(sim-profile_h) \
-+		$(sim-model_h) \
-+		$(sim-io_h) \
-+		$(sim-engine_h) \
-+		$(sim-watch_h) \
-+		$(sim-memopt_h) \
-+		$(sim-cpu_h)
-+sim-basics_h = $(srccom)/sim-basics.h \
-+		../common/cconfig.h \
-+		tconfig.h \
-+		$(sim-config_h) \
-+		$(callback_h) \
-+		$(sim-inline_h) \
-+		$(sim-types_h) \
-+		$(sim-bits_h) \
-+		$(sim-endian_h) \
-+		$(sim-signal_h) \
-+		$(sim-arange_h) \
-+		$(sim-utils_h)
-+sim-bits_h = $(srccom)/sim-bits.h \
-+		$(srccom)/sim-bits.c
-+sim-config_h = $(srccom)/sim-config.h
-+sim-core_h = $(srccom)/sim-core.h
-+sim-cpu_h = $(srccom)/sim-cpu.h
-+sim-endian_h = $(srccom)/sim-endian.h \
-+		$(srccom)/sim-endian.c
-+sim-engine_h = $(srccom)/sim-engine.h
-+sim-events_h = $(srccom)/sim-events.h
-+sim-fpu_h = $(srccom)/sim-fpu.h
-+sim-hw_h = $(srccom)/sim-hw.h
-+sim-inline_h = $(srccom)/sim-inline.h
-+sim-io_h = $(srccom)/sim-io.h
-+sim-memopt_h = $(srccom)/sim-memopt.h
-+sim-model_h = $(srccom)/sim-model.h
-+sim-module_h = $(srccom)/sim-module.h
-+sim-n-bits_h = $(srccom)/sim-n-bits.h
-+sim-n-core_h = $(srccom)/sim-n-core.h
-+sim-n-endian_h = $(srccom)/sim-n-endian.h
-+sim-options_h = $(srccom)/sim-options.h
-+sim-profile_h = $(srccom)/sim-profile.h
-+sim-signal_h = $(srccom)/sim-signal.h
-+sim-trace_h = $(srccom)/sim-trace.h
-+sim-types_h = $(srccom)/sim-types.h
-+sim-utils_h = $(srccom)/sim-utils.h
-+sim-watch_h = $(srccom)/sim-watch.h
-+
-+hw-alloc_h = $(srccom)/hw-alloc.h
-+hw-base_h = $(srccom)/hw-base.h
-+hw-device_h = $(srccom)/hw-device.h
-+hw-events_h = $(srccom)/hw-events.h
-+hw-handles_h = $(srccom)/hw-handles.h
-+hw-instances_h = $(srccom)/hw-instances.h
-+hw-ports_h = $(srccom)/hw-ports.h
-+hw-properties_h = $(srccom)/hw-properties.h
-+hw-tree_h = $(srccom)/hw-tree.h
-+
-+hw_main_headers = \
-+	$(srccom)/hw-main.h \
-+	$(hw-alloc_h) \
-+	$(hw-base_h) \
-+	$(hw-device_h) \
-+	$(hw-events_h) \
-+	$(hw-instances_h) \
-+	$(hw-handles_h) \
-+	$(hw-ports_h) \
-+	$(hw-properties_h) \
-+
-+#
-+# Dependency tracking.  Most of this is conditional on GNU Make being
-+# found by configure; if GNU Make is not found, we fall back to a
-+# simpler scheme.
-+#
-+
-+@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
-+# Note that we put the dependencies into a .Tpo file, then move them
-+# into place if the compile succeeds.  We need this because gcc does
-+# not atomically write the dependency output file.
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+@GMAKE_TRUE@	-MF $(DEPDIR)/$(basename $(@F)).Tpo
-+@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+@GMAKE_TRUE@	$(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@else
-+@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
-+@GMAKE_TRUE@	DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-+# depcomp handles atomicity for us, so we don't need a postcompile
-+# step.
-+@GMAKE_TRUE@override POSTCOMPILE =
-+@GMAKE_TRUE@endif
-+
-+all_object_files = $(LIB_OBJS) $(SIM_RUN_OBJS)
-+generated_files = \
-+	$(SIM_EXTRA_DEPS) \
-+	hw-config.h \
-+	targ-map.c \
-+	targ-vals.h \
-+	version.c
-+
-+# Ensure that generated files are created early.  Use order-only
-+# dependencies if available.  They require GNU make 3.80 or newer,
-+# and the .VARIABLES variable was introduced at the same time.
-+@GMAKE_TRUE@ifdef .VARIABLES
-+@GMAKE_TRUE@$(all_object_files): | $(generated_files)
-+@GMAKE_TRUE@else
-+$(all_object_files) : $(generated_files)
-+@GMAKE_TRUE@endif
-+
-+# Dependencies.
-+@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
-+
-+BUILT_SRC_FROM_COMMON= \
-+	sim-inline.c
-+
-+sim-inline.c: $(srccom)/sim-inline.c
-+	rm -f $@ tmp-$@
-+	echo "# 1 \"$(srccom)/$@\"" > tmp-$@
-+	cat $(srccom)/$@ >> tmp-$@
-+	$(SHELL) $(srcdir)/../../move-if-change tmp-$@ $@
-+
-+# FIXME This is one very simple-minded way of generating the file hw-config.h
-+hw-config.h: Makefile.in $(srccom)/Make-common.in config.status Makefile
-+	rm -f tmp-hw.h
-+	echo "/* generated by Makefile */" > tmp-hw.h
-+	sim_hw="$(SIM_HW)"; \
-+	for hw in $$sim_hw ; do \
-+	  echo "extern const struct hw_descriptor dv_$${hw}_descriptor[];" ; \
-+	done >> tmp-hw.h
-+	echo "const struct hw_descriptor *hw_descriptors[] = {" >> tmp-hw.h
-+	sim_hw="$(SIM_HW)"; \
-+	for hw in $$sim_hw ; do \
-+	  echo "  dv_$${hw}_descriptor," ; \
-+	done >> tmp-hw.h
-+	echo "  NULL," >> tmp-hw.h
-+	echo "};" >> tmp-hw.h
-+	mv tmp-hw.h hw-config.h
-+
-+test-hw-events: $(srccom)/hw-events.c libsim.a
-+	$(CC) $(ALL_CFLAGS) -DMAIN -o test-hw-events$(EXEEXT) \
-+		$(srccom)/hw-events.c libsim.a $(EXTRA_LIBS)
-+
-+# CGEN support.
-+
-+# For use in Makefile.in for cpu-specific files.
-+CGEN_MAIN_CPU_DEPS = \
-+	$(SIM_MAIN_DEPS) \
-+	$(srccom)/cgen-ops.h \
-+	$(srccom)/cgen-mem.h
-+
-+# Support targets.
-+
-+install: install-common $(SIM_EXTRA_INSTALL)
-+
-+install-common: installdirs
-+	n=`echo run | sed '$(program_transform_name)'`; \
-+	$(INSTALL_PROGRAM) run$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT)
-+	n=`echo libsim.a | sed s/libsim.a/lib$(target_alias)-sim.a/`; \
-+	$(INSTALL_DATA) libsim.a $(DESTDIR)$(libdir)/$$n ; \
-+	( cd $(DESTDIR)$(libdir) ; $(RANLIB) $$n )
-+
-+installdirs:
-+	$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(bindir)
-+	$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(libdir)
-+
-+check:
-+	cd ../testsuite && $(MAKE) check RUNTESTFLAGS="$(RUNTESTFLAGS)"
-+
-+info:
-+clean-info:
-+install-info:
-+
-+.NOEXPORT:
-+MAKEOVERRIDES=
-+
-+tags etags: TAGS
-+
-+# Macros like EXTERN_SIM_CORE confuse tags.
-+# And the sim-n-foo.h files create functions that can't be found either.
-+TAGS: force
-+	cd $(srcdir) && \
-+	etags --regex '/^\([[:lower:]_]+\) (/\1/' --regex '/^\/[*] TAGS: .*/' \
-+		*.[ch] ../common/*.[ch]
-+
-+clean: $(SIM_EXTRA_CLEAN)
-+	rm -f *.[oa] *~ core
-+	rm -f run$(EXEEXT) libsim.a
-+	rm -f gentmap targ-map.c targ-vals.h stamp-tvals
-+	if [ ! -f Make-common.in ] ; then \
-+		rm -f $(BUILT_SRC_FROM_COMMON) ; \
-+	fi
-+	rm -f tmp-mloop.hin tmp-mloop.h tmp-mloop.cin tmp-mloop.c
-+
-+distclean mostlyclean maintainer-clean realclean: clean $(SIM_EXTRA_DISTCLEAN)
-+	rm -f TAGS
-+	rm -f Makefile config.cache config.log config.status .gdbinit
-+	rm -f tconfig.h config.h stamp-h
-+	rm -f targ-vals.def
-+
-+.c.o:
-+	$(COMPILE) $<
-+	$(POSTCOMPILE)
-+
-+# Dummy target to force execution of dependent targets.
-+force:
-+
-+Makefile: Makefile.in $(srccom)/Make-common.in config.status
-+	CONFIG_HEADERS= $(SHELL) ./config.status
-+
-+config.status: configure
-+	$(SHELL) ./config.status --recheck
-+
-+config.h: stamp-h ; @true
-+stamp-h: config.in config.status
-+	CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status
-+
-+.gdbinit: # config.status $(srccom)/gdbinit.in
-+	CONFIG_FILES=$@:../common/gdbinit.in CONFIG_HEADERS= $(SHELL) ./config.status
-+
-+
-+# CGEN support
-+
-+CGENDIR = @cgendir@
-+CGEN = "`if [ -f ../../guile/libguile/guile ]; then echo ../../guile/libguile/guile; else echo guile ; fi` -l $(CGENDIR)/guile.scm -s"
-+CGENFLAGS = -v
-+CGEN_CPU_DIR = $(CGENDIR)/cpu
-+
-+# Most ports use the files here instead of cgen/cpu.
-+CPU_DIR = $(srcroot)/cpu
-+
-+CGEN_READ_SCM = $(CGENDIR)/sim.scm
-+CGEN_ARCH_SCM = $(CGENDIR)/sim-arch.scm
-+CGEN_CPU_SCM = $(CGENDIR)/sim-cpu.scm $(CGENDIR)/sim-model.scm
-+CGEN_DECODE_SCM = $(CGENDIR)/sim-decode.scm
-+CGEN_DESC_SCM = $(CGENDIR)/desc.scm $(CGENDIR)/desc-cpu.scm
-+
-+# Various choices for which cpu specific files to generate.
-+# These are passed to cgen.sh in the "extrafiles" argument.
-+CGEN_CPU_EXTR = /extr/
-+CGEN_CPU_READ = /read/
-+CGEN_CPU_WRITE = /write/
-+CGEN_CPU_SEM = /sem/
-+CGEN_CPU_SEMSW = /semsw/
-+
-+CGEN_FLAGS_TO_PASS = \
-+	CGEN='$(CGEN)' \
-+	CGENFLAGS="$(CGENFLAGS)"
-+
-+# We store the generated files in the source directory until we decide to
-+# ship a Scheme interpreter with gdb/binutils.  Maybe we never will.
-+
-+cgen-arch: force
-+	$(SHELL) $(srccom)/cgen.sh arch $(srcdir) \
-+		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
-+		$(arch) "$(FLAGS)" ignored "$(isa)" $(mach) ignored \
-+		$(archfile) ignored
-+
-+cgen-cpu: force
-+	$(SHELL) $(srccom)/cgen.sh cpu $(srcdir) \
-+		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
-+		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
-+		$(archfile) "$(EXTRAFILES)"
-+
-+cgen-defs: force
-+	$(SHELL) $(srccom)/cgen.sh defs $(srcdir) \
-+		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
-+		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
-+		$(archfile) ignored
-+
-+cgen-decode: force
-+	$(SHELL) $(srccom)/cgen.sh decode $(srcdir) \
-+		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
-+		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
-+		$(archfile) "$(EXTRAFILES)"
-+
-+cgen-cpu-decode: force
-+	$(SHELL) $(srccom)/cgen.sh cpu-decode $(srcdir) \
-+		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
-+		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
-+		$(archfile) "$(EXTRAFILES)"
-+
-+cgen-desc: force
-+	$(SHELL) $(srccom)/cgen.sh desc $(srcdir) \
-+		$(CGEN) $(CGENDIR) "$(CGENFLAGS)" \
-+		$(arch) "$(FLAGS)" $(cpu) "$(isa)" $(mach) "$(SUFFIX)" \
-+		$(archfile) ignored $(opcfile)
-+
-+## End COMMON_POST_CONFIG_FRAG
diff --git a/select_toolchain.sh b/select_toolchain.sh
index 2180584..14a8765 100755
--- a/select_toolchain.sh
+++ b/select_toolchain.sh
@@ -33,7 +33,7 @@ case "$VERSION" in
     GCC_VER=4.9.0
     BINUTILS_VER=2.24
     NEWLIB_VER=2.1.0
-    GDB_VER=7.7
+    GDB_VER=7.7.1
     basedir='dkarm-eabi'
     package=devkitARM
     target=arm-none-eabi