diff --git a/dkarm-eabi/patches/gcc-4.7.2.patch b/dkarm-eabi/patches/gcc-4.7.2.patch
index a701083..073aaad 100644
--- a/dkarm-eabi/patches/gcc-4.7.2.patch
+++ b/dkarm-eabi/patches/gcc-4.7.2.patch
@@ -1,4 +1,4 @@
-diff -NBaur gcc-4.7.2/gcc/config/arm/t-arm-elf gcc-4.7.2-arm/gcc/config/arm/t-arm-elf
+diff -Nbaur gcc-4.7.2/gcc/config/arm/t-arm-elf gcc-4.7.2-arm/gcc/config/arm/t-arm-elf
--- gcc-4.7.2/gcc/config/arm/t-arm-elf 2012-08-06 15:34:27.000000000 +0100
+++ gcc-4.7.2-arm/gcc/config/arm/t-arm-elf 2012-12-16 00:47:39.000000000 +0000
@@ -26,22 +26,44 @@
@@ -71,7 +71,7 @@ diff -NBaur gcc-4.7.2/gcc/config/arm/t-arm-elf gcc-4.7.2-arm/gcc/config/arm/t-ar
#
# MULTILIB_OPTIONS += mfloat-abi=hard/mfloat-abi=soft
# MULTILIB_DIRNAMES += fpu soft
-diff -NBaur gcc-4.7.2/gcc/config/arm/unknown-elf.h gcc-4.7.2-arm/gcc/config/arm/unknown-elf.h
+diff -Nbaur gcc-4.7.2/gcc/config/arm/unknown-elf.h gcc-4.7.2-arm/gcc/config/arm/unknown-elf.h
--- gcc-4.7.2/gcc/config/arm/unknown-elf.h 2011-03-31 13:13:13.000000000 +0100
+++ gcc-4.7.2-arm/gcc/config/arm/unknown-elf.h 2012-12-16 00:47:39.000000000 +0000
@@ -94,4 +94,4 @@
@@ -80,7 +80,7 @@ diff -NBaur gcc-4.7.2/gcc/config/arm/unknown-elf.h gcc-4.7.2-arm/gcc/config/arm/
#undef LINK_GCC_C_SEQUENCE_SPEC
-#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L --end-group"
+#define LINK_GCC_C_SEQUENCE_SPEC "--start-group %G %L %(libgloss) --end-group"
-diff -NBaur gcc-4.7.2/gcc/gcc.c gcc-4.7.2-arm/gcc/gcc.c
+diff -Nbaur gcc-4.7.2/gcc/gcc.c gcc-4.7.2-arm/gcc/gcc.c
--- gcc-4.7.2/gcc/gcc.c 2012-08-06 15:34:27.000000000 +0100
+++ gcc-4.7.2-arm/gcc/gcc.c 2012-12-16 00:47:39.000000000 +0000
@@ -548,6 +548,11 @@
@@ -111,7 +111,7 @@ diff -NBaur gcc-4.7.2/gcc/gcc.c gcc-4.7.2-arm/gcc/gcc.c
INIT_STATIC_SPEC ("startfile", &startfile_spec),
INIT_STATIC_SPEC ("cross_compile", &cross_compile),
INIT_STATIC_SPEC ("version", &compiler_version),
-diff -NBaur gcc-4.7.2/libcpp/Makefile.in gcc-4.7.2-arm/libcpp/Makefile.in
+diff -Nbaur gcc-4.7.2/libcpp/Makefile.in gcc-4.7.2-arm/libcpp/Makefile.in
--- gcc-4.7.2/libcpp/Makefile.in 2012-09-20 08:23:55.000000000 +0100
+++ gcc-4.7.2-arm/libcpp/Makefile.in 2012-12-16 00:47:39.000000000 +0000
@@ -214,8 +214,7 @@
@@ -124,7 +124,7 @@ diff -NBaur gcc-4.7.2/libcpp/Makefile.in gcc-4.7.2-arm/libcpp/Makefile.in
else
COMPILE = source='$<' object='$@' libtool=no DEPDIR=$(DEPDIR) $(DEPMODE) \
$(depcomp) $(COMPILE.base)
-diff -NBaur gcc-4.7.2/libgcc/Makefile.in gcc-4.7.2-arm/libgcc/Makefile.in
+diff -Nbaur gcc-4.7.2/libgcc/Makefile.in gcc-4.7.2-arm/libgcc/Makefile.in
--- gcc-4.7.2/libgcc/Makefile.in 2012-09-05 13:19:47.000000000 +0100
+++ gcc-4.7.2-arm/libgcc/Makefile.in 2012-12-16 00:47:39.000000000 +0000
@@ -500,14 +500,14 @@
@@ -153,1109 +153,7 @@ diff -NBaur gcc-4.7.2/libgcc/Makefile.in gcc-4.7.2-arm/libgcc/Makefile.in
ifeq ($(enable_shared),yes)
-diff -NBaur gcc-4.7.2/libgcc/Makefile.in.orig gcc-4.7.2-arm/libgcc/Makefile.in.orig
---- gcc-4.7.2/libgcc/Makefile.in.orig 1970-01-01 01:00:00.000000000 +0100
-+++ gcc-4.7.2-arm/libgcc/Makefile.in.orig 2012-09-05 13:19:47.000000000 +0100
-@@ -0,0 +1,1098 @@
-+# Makefile.in
-+
-+# Copyright (C) 2005, 2006, 2009, 2010, 2011 Free Software Foundation
-+#
-+# This file is part of GCC.
-+#
-+# GCC is free software; you can redistribute it and/or modify it under the
-+# terms of the GNU Library General Public License as published by the Free
-+# Software Foundation; either version 3 of the License, or (at your option)
-+# any later version.
-+#
-+# GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-+# FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+# more details.
-+#
-+# You should have received a copy of the GNU General Public License along
-+# with GCC; see the file COPYING3. If not see
-+# .
-+#
-+
-+libgcc_topdir = @libgcc_topdir@
-+host_subdir = @host_subdir@
-+
-+gcc_objdir = $(MULTIBUILDTOP)../../$(host_subdir)/gcc
-+
-+srcdir = @srcdir@
-+
-+prefix = @prefix@
-+
-+exec_prefix = @exec_prefix@
-+libdir = @libdir@
-+shlib_slibdir = @slibdir@
-+
-+SHELL = @SHELL@
-+
-+cpu_type = @cpu_type@
-+enable_shared = @enable_shared@
-+double_type_size = @double_type_size@
-+long_double_type_size = @long_double_type_size@
-+decimal_float = @decimal_float@
-+enable_decimal_float = @enable_decimal_float@
-+fixed_point = @fixed_point@
-+
-+host_noncanonical = @host_noncanonical@
-+target_noncanonical = @target_noncanonical@
-+
-+# List of extra object files that should be compiled for this target machine.
-+# The rules for compiling them should be in the t-* file for the machine.
-+EXTRA_PARTS = @extra_parts@
-+
-+extra-parts = libgcc-extra-parts
-+
-+# Multilib support variables.
-+MULTISRCTOP =
-+MULTIBUILDTOP =
-+MULTIDIRS =
-+MULTISUBDIR =
-+MULTIDO = true
-+MULTICLEAN = true
-+
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+INSTALL_DATA = @INSTALL_DATA@
-+mkinstalldirs = $(SHELL) $(libgcc_topdir)/mkinstalldirs
-+INSTALL_PARTS = $(EXTRA_PARTS)
-+
-+objext = .o
-+
-+AR = @AR@
-+AR_FLAGS = rc
-+
-+CC = @CC@
-+CFLAGS = @CFLAGS@
-+RANLIB = @RANLIB@
-+LN_S = @LN_S@
-+
-+PWD_COMMAND = $${PWDCMD-pwd}
-+
-+# Flags to pass to a recursive make.
-+FLAGS_TO_PASS = \
-+ "AR=$(AR)" \
-+ "AR_FLAGS=$(AR_FLAGS)" \
-+ "CC=$(CC)" \
-+ "CFLAGS=$(CFLAGS)" \
-+ "DESTDIR=$(DESTDIR)" \
-+ "EXTRA_OFILES=$(EXTRA_OFILES)" \
-+ "HDEFINES=$(HDEFINES)" \
-+ "INSTALL=$(INSTALL)" \
-+ "INSTALL_DATA=$(INSTALL_DATA)" \
-+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-+ "LDFLAGS=$(LDFLAGS)" \
-+ "LOADLIBES=$(LOADLIBES)" \
-+ "RANLIB=$(RANLIB)" \
-+ "SHELL=$(SHELL)" \
-+ "prefix=$(prefix)" \
-+ "exec_prefix=$(exec_prefix)" \
-+ "libdir=$(libdir)" \
-+ "libsubdir=$(libsubdir)" \
-+ "tooldir=$(tooldir)"
-+
-+# Dependencies for "all" are set later in the file.
-+all: all-multi
-+ # Now that we have built all the objects, we need to copy
-+ # them back to the GCC directory. Too many things (other
-+ # in-tree libraries, and DejaGNU) know about the layout
-+ # of the build tree, for now.
-+ $(MAKE) install-leaf DESTDIR=$(gcc_objdir) \
-+ slibdir= libsubdir= MULTIOSDIR=$(MULTIDIR)
-+
-+.PHONY: all-multi
-+all-multi:
-+ # If this is the top-level multilib, build all the other
-+ # multilibs.
-+ @: $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
-+
-+.PHONY: check installcheck
-+check:
-+installcheck:
-+
-+.PHONY: all clean
-+
-+clean:
-+ -rm -f config.h libgcc_tm.h stamp-h stmp-ldirs libgcc.map
-+ -rm -f *$(objext)
-+ -rm -f *.dep
-+ -rm -f *.a
-+ -rm -f libunwind$(SHLIB_EXT)
-+ -rm -f libgcc_s*
-+ @$(MULTICLEAN) multi-clean DO=clean
-+distclean: clean
-+ @$(MULTICLEAN) multi-clean DO=distclean
-+ -rm -f *~ Makefile config.cache config.status multilib.out
-+ -rm -f config.log
-+maintainer-clean realclean: distclean
-+
-+Makefile: $(srcdir)/Makefile.in config.status
-+ CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status
-+
-+# Depending on Makefile makes sure that config.status has been re-run
-+# if needed. This prevents problems with parallel builds.
-+config.h: stamp-h ; @true
-+stamp-h: $(srcdir)/config.in config.status Makefile
-+ CONFIG_FILES= CONFIG_HEADERS=config.h:$(srcdir)/config.in $(SHELL) ./config.status
-+
-+config.status: $(srcdir)/configure $(srcdir)/config.host
-+ $(SHELL) ./config.status --recheck
-+
-+AUTOCONF = autoconf
-+configure_deps = \
-+ $(srcdir)/../config/enable.m4 \
-+ $(srcdir)/../config/tls.m4 \
-+ $(srcdir)/../config/acx.m4 \
-+ $(srcdir)/../config/no-executables.m4 \
-+ $(srcdir)/../config/override.m4 \
-+ $(srcdir)/../config/dfp.m4 \
-+
-+$(srcdir)/configure: @MAINT@ $(srcdir)/configure.ac $(configure_deps)
-+ cd $(srcdir) && $(AUTOCONF)
-+
-+include $(gcc_objdir)/libgcc.mvars
-+
-+# Flags to pass to recursive makes.
-+
-+AR_FOR_TARGET = $(AR)
-+AR_FLAGS_FOR_TARGET =
-+AR_CREATE_FOR_TARGET = $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) rc
-+AR_EXTRACT_FOR_TARGET = $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) x
-+AWK = @AWK@
-+GCC_FOR_TARGET = $(CC)
-+LIPO = @LIPO@
-+LIPO_FOR_TARGET = $(LIPO)
-+MACHMODE_H = machmode.h mode-classes.def insn-modes.h
-+NM = @NM@
-+NM_FOR_TARGET = $(NM)
-+RANLIB_FOR_TARGET = $(RANLIB)
-+STRIP = @STRIP@
-+STRIP_FOR_TARGET = $(STRIP)
-+
-+# Directory in which the compiler finds libraries etc.
-+libsubdir = $(libdir)/gcc/$(host_noncanonical)/$(version)
-+# Used to install the shared libgcc.
-+slibdir = @slibdir@
-+# Maybe used for DLLs on Windows targets.
-+toolexecdir = @toolexecdir@
-+toolexeclibdir = @toolexeclibdir@
-+
-+export AR_FOR_TARGET
-+export AR_CREATE_FOR_TARGET
-+export AR_FLAGS_FOR_TARGET
-+export AR_EXTRACT_FOR_TARGET
-+export AWK
-+export DESTDIR
-+export GCC_FOR_TARGET
-+export INCLUDES
-+export INSTALL_DATA
-+export LIB1ASMSRC
-+export LIBGCC2_CFLAGS
-+export LIPO_FOR_TARGET
-+export MACHMODE_H
-+export NM_FOR_TARGET
-+export STRIP_FOR_TARGET
-+export RANLIB_FOR_TARGET
-+export libsubdir
-+export slibdir
-+export toolexecdir
-+export toolexeclibdir
-+
-+version := $(shell $(CC) -dumpversion)
-+
-+ifeq ($(decimal_float),yes)
-+ifeq ($(enable_decimal_float),bid)
-+DECNUMINC = -I$(srcdir)/config/libbid -DENABLE_DECIMAL_BID_FORMAT
-+else
-+DECNUMINC = -I$(srcdir)/../libdecnumber/$(enable_decimal_float) \
-+ -I$(srcdir)/../libdecnumber
-+endif
-+else
-+DECNUMINC =
-+endif
-+
-+# Options to use when compiling libgcc2.a.
-+#
-+LIBGCC2_DEBUG_CFLAGS = -g
-+LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(HOST_LIBGCC2_CFLAGS) \
-+ $(LIBGCC2_DEBUG_CFLAGS) -DIN_LIBGCC2 \
-+ -fbuilding-libgcc -fno-stack-protector \
-+ $(INHIBIT_LIBC_CFLAGS)
-+
-+# Additional options to use when compiling libgcc2.a.
-+# Some targets override this to -isystem include
-+LIBGCC2_INCLUDES =
-+
-+# Additional target-dependent options for compiling libgcc2.a.
-+HOST_LIBGCC2_CFLAGS =
-+
-+PICFLAG = @PICFLAG@
-+
-+# Defined in libgcc2.c, included only in the static library.
-+LIB2FUNCS_ST = _eprintf __gcc_bcmp
-+
-+# List of functions not to build from libgcc2.c.
-+LIB2FUNCS_EXCLUDE =
-+
-+# These might cause a divide overflow trap and so are compiled with
-+# unwinder info.
-+LIB2_DIVMOD_FUNCS = _divdi3 _moddi3 _udivdi3 _umoddi3 _udiv_w_sdiv _udivmoddi4
-+
-+# List of extra C and assembler files to add to static and shared libgcc2.
-+# Assembler files should have names ending in `.S'.
-+LIB2ADD =
-+
-+# List of extra C and assembler files to add to static libgcc2.
-+# Assembler files should have names ending in `.S'.
-+LIB2ADD_ST =
-+
-+# Specify the directories to be searched for header files.
-+# Both . and srcdir are used, in that order,
-+# so that *config.h will be found in the compilation
-+# subdirectory rather than in the source directory.
-+# -I$(@D) and -I$(srcdir)/$(@D) cause the subdirectory of the file
-+# currently being compiled, in both source trees, to be examined as well.
-+INCLUDES = -I. -I$(@D) -I$(gcc_objdir) \
-+ -I$(srcdir) -I$(srcdir)/$(@D) -I$(srcdir)/../gcc \
-+ -I$(srcdir)/../include $(DECNUMINC)
-+
-+# Forcibly remove any profiling-related flags. There is no point
-+# in supporting profiled bootstrap in this library.
-+override CFLAGS := $(filter-out -fprofile-generate -fprofile-use,$(CFLAGS))
-+
-+# CFLAGS first is not perfect; normally setting CFLAGS should override any
-+# options in LIBGCC2_CFLAGS. But LIBGCC2_CFLAGS may contain -g0, and CFLAGS
-+# will usually contain -g, so for the moment CFLAGS goes first. We must
-+# include CFLAGS - that's where multilib options live.
-+INTERNAL_CFLAGS = $(CFLAGS) $(LIBGCC2_CFLAGS) $(HOST_LIBGCC2_CFLAGS) \
-+ $(INCLUDES) @set_have_cc_tls@ @set_use_emutls@
-+
-+# Options to use when compiling crtbegin/end.
-+CRTSTUFF_CFLAGS = -O2 $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
-+ -finhibit-size-directive -fno-inline -fno-exceptions \
-+ -fno-zero-initialized-in-bss -fno-toplevel-reorder -fno-tree-vectorize \
-+ -fno-stack-protector \
-+ $(INHIBIT_LIBC_CFLAGS)
-+
-+# Extra flags to use when compiling crt{begin,end}.o.
-+CRTSTUFF_T_CFLAGS =
-+
-+MULTIDIR := $(shell $(CC) $(CFLAGS) -print-multi-directory)
-+MULTIOSDIR := $(shell $(CC) $(CFLAGS) -print-multi-os-directory)
-+
-+MULTIOSSUBDIR := $(shell if test $(MULTIOSDIR) != .; then echo /$(MULTIOSDIR); fi)
-+inst_libdir = $(libsubdir)$(MULTISUBDIR)
-+inst_slibdir = $(slibdir)$(MULTIOSSUBDIR)
-+
-+gcc_compile_bare = $(CC) $(INTERNAL_CFLAGS)
-+compile_deps = -MT $@ -MD -MP -MF $(basename $@).dep
-+gcc_compile = $(gcc_compile_bare) -o $@ $(compile_deps)
-+gcc_s_compile = $(gcc_compile) -DSHARED
-+
-+objects = $(filter %$(objext),$^)
-+
-+# Collect any host-specific information from Makefile fragments.
-+
-+LIBGCC_VER_GNU_PREFIX = __
-+LIBGCC_VER_FIXEDPOINT_GNU_PREFIX = __
-+LIBGCC_VER_SYMBOLS_PREFIX =
-+
-+FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
-+ _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
-+ _lt_sf _le_sf _unord_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
-+ _sf_to_df _sf_to_tf _thenan_sf _sf_to_usi _usi_to_sf
-+
-+DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
-+ _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
-+ _lt_df _le_df _unord_df _si_to_df _df_to_si _negate_df _make_df \
-+ _df_to_sf _df_to_tf _thenan_df _df_to_usi _usi_to_df
-+
-+TPBIT_FUNCS = _pack_tf _unpack_tf _addsub_tf _mul_tf _div_tf \
-+ _fpcmp_parts_tf _compare_tf _eq_tf _ne_tf _gt_tf _ge_tf \
-+ _lt_tf _le_tf _unord_tf _si_to_tf _tf_to_si _negate_tf _make_tf \
-+ _tf_to_df _tf_to_sf _thenan_tf _tf_to_usi _usi_to_tf
-+
-+# Additional sources to handle exceptions; overridden by targets as needed.
-+LIB2ADDEH = $(srcdir)/unwind-dw2.c $(srcdir)/unwind-dw2-fde.c \
-+ $(srcdir)/unwind-sjlj.c $(srcdir)/unwind-c.c
-+LIB2ADDEHSTATIC = $(LIB2ADDEH)
-+LIB2ADDEHSHARED = $(LIB2ADDEH)
-+
-+# nm flags to list global symbols in libgcc object files.
-+SHLIB_NM_FLAGS = -pg
-+
-+# Don't build libunwind by default.
-+LIBUNWIND =
-+SHLIBUNWIND_LINK =
-+SHLIBUNWIND_INSTALL =
-+
-+tmake_file = @tmake_file@
-+include $(srcdir)/empty.mk $(tmake_file)
-+
-+# Collect target defines and headers from config.host.
-+libgcc_tm_defines = @tm_defines@
-+libgcc_tm_file = @tm_file@
-+libgcc_tm.h: libgcc_tm.stamp; @true
-+libgcc_tm.stamp:
-+ DEFINES='$(libgcc_tm_defines)' HEADERS='$(libgcc_tm_file)' \
-+ $(srcdir)/mkheader.sh > tmp-libgcc_tm.h
-+ $(SHELL) $(srcdir)/../move-if-change tmp-libgcc_tm.h libgcc_tm.h
-+ echo timestamp > $@
-+
-+# Only handle shared libraries if both:
-+# - the user requested them
-+# - we know how to build them
-+ifeq ($(SHLIB_LINK),)
-+ enable_shared := no
-+endif
-+
-+ifeq ($(enable_shared),yes)
-+ iterator = $(srcdir)/empty.mk $(patsubst %,$(srcdir)/shared-object.mk,$(iter-items))
-+
-+ install-shared = install-shared
-+
-+ ifneq ($(LIBUNWIND),)
-+ install-libunwind = install-libunwind
-+ endif
-+
-+# For -fvisibility=hidden. We need both a -fvisibility=hidden on
-+# the command line, and a #define to prevent libgcc2.h etc from
-+# overriding that with #pragmas.
-+vis_hide = @vis_hide@
-+
-+ifneq (,$(vis_hide))
-+
-+# If we have -fvisibility=hidden, then we need to generate hide
-+# lists for object files implemented in assembly.
-+ASM_HIDDEN_OP = @asm_hidden_op@
-+
-+define gen-hide-list
-+$(NM) -pg $< | \
-+ $(AWK) 'NF == 3 && $$2 !~ /^[UN]$$/ && $$3 !~ /.*_compat/ \
-+ && $$3 !~ /.*@.*/ \
-+ { print "\t$(ASM_HIDDEN_OP)", $$3 }' > $@T
-+mv -f $@T $@
-+endef
-+else
-+gen-hide-list = echo > $@
-+endif
-+
-+else
-+# Not enable_shared.
-+iterator = $(srcdir)/empty.mk $(patsubst %,$(srcdir)/static-object.mk,$(iter-items))
-+vis_hide =
-+gen-hide-list = echo > \$@
-+endif
-+
-+LIB2ADD += enable-execute-stack.c
-+
-+# While emutls.c has nothing to do with EH, it is in LIB2ADDEH*
-+# instead of LIB2ADD because that's the way to be sure on some targets
-+# (e.g. *-*-darwin*) only one copy of it is linked.
-+LIB2ADDEH += $(srcdir)/emutls.c
-+LIB2ADDEHSTATIC += $(srcdir)/emutls.c
-+LIB2ADDEHSHARED += $(srcdir)/emutls.c
-+
-+# Library members defined in libgcc2.c.
-+lib2funcs = _muldi3 _negdi2 _lshrdi3 _ashldi3 _ashrdi3 _cmpdi2 _ucmpdi2 \
-+ _clear_cache _trampoline __main _absvsi2 \
-+ _absvdi2 _addvsi3 _addvdi3 _subvsi3 _subvdi3 _mulvsi3 _mulvdi3 \
-+ _negvsi2 _negvdi2 _ctors _ffssi2 _ffsdi2 _clz _clzsi2 _clzdi2 \
-+ _ctzsi2 _ctzdi2 _popcount_tab _popcountsi2 _popcountdi2 \
-+ _paritysi2 _paritydi2 _powisf2 _powidf2 _powixf2 _powitf2 \
-+ _mulsc3 _muldc3 _mulxc3 _multc3 _divsc3 _divdc3 _divxc3 \
-+ _divtc3 _bswapsi2 _bswapdi2 _clrsbsi2 _clrsbdi2
-+
-+# The floating-point conversion routines that involve a single-word integer.
-+# XX stands for the integer mode.
-+swfloatfuncs = $(patsubst %,_fixuns%XX,sf df xf)
-+
-+# Likewise double-word routines.
-+dwfloatfuncs = $(patsubst %,_fix%XX,sf df xf tf) \
-+ $(patsubst %,_fixuns%XX,sf df xf tf) \
-+ $(patsubst %,_floatXX%,sf df xf tf) \
-+ $(patsubst %,_floatunXX%,sf df xf tf)
-+
-+ifeq ($(LIB2_SIDITI_CONV_FUNCS),)
-+ lib2funcs += $(subst XX,si,$(swfloatfuncs))
-+ lib2funcs += $(subst XX,di,$(dwfloatfuncs))
-+endif
-+
-+# These might cause a divide overflow trap and so are compiled with
-+# unwinder info.
-+LIB2_DIVMOD_FUNCS = _divdi3 _moddi3 _udivdi3 _umoddi3 _udiv_w_sdiv _udivmoddi4
-+
-+# Remove any objects from lib2funcs and LIB2_DIVMOD_FUNCS that are
-+# defined as optimized assembly code in LIB1ASMFUNCS or as C code
-+# in LIB2FUNCS_EXCLUDE.
-+lib2funcs := $(filter-out $(LIB2FUNCS_EXCLUDE) $(LIB1ASMFUNCS),$(lib2funcs))
-+LIB2_DIVMOD_FUNCS := $(filter-out $(LIB2FUNCS_EXCLUDE) $(LIB1ASMFUNCS), \
-+ $(LIB2_DIVMOD_FUNCS))
-+
-+# Build "libgcc1" (assembly) components.
-+ifeq ($(enable_shared),yes)
-+
-+lib1asmfuncs-o = $(patsubst %,%$(objext),$(LIB1ASMFUNCS))
-+$(lib1asmfuncs-o): %$(objext): $(srcdir)/config/$(LIB1ASMSRC) %.vis
-+ $(gcc_compile) -DL$* -xassembler-with-cpp -c $< -include $*.vis
-+$(patsubst %,%.vis,$(LIB1ASMFUNCS)): %.vis: %_s$(objext)
-+ $(gen-hide-list)
-+libgcc-objects += $(lib1asmfuncs-o)
-+
-+lib1asmfuncs-s-o = $(patsubst %,%_s$(objext),$(LIB1ASMFUNCS))
-+$(lib1asmfuncs-s-o): %_s$(objext): $(srcdir)/config/$(LIB1ASMSRC)
-+ $(gcc_s_compile) -DL$* -xassembler-with-cpp -c $<
-+libgcc-s-objects += $(lib1asmfuncs-s-o)
-+
-+else
-+
-+lib1asmfuncs-o = $(patsubst %,%$(objext),$(LIB1ASMFUNCS))
-+$(lib1asmfuncs-o): %$(objext): $(srcdir)/config/$(LIB1ASMSRC)
-+ $(gcc_compile) -DL$* -xassembler-with-cpp -c $<
-+libgcc-objects += $(lib1asmfuncs-o)
-+
-+endif
-+
-+# Build lib2funcs. For the static library also include LIB2FUNCS_ST.
-+lib2funcs-o = $(patsubst %,%$(objext),$(lib2funcs) $(LIB2FUNCS_ST))
-+$(lib2funcs-o): %$(objext): $(srcdir)/libgcc2.c
-+ $(gcc_compile) -DL$* -c $< $(vis_hide)
-+libgcc-objects += $(lib2funcs-o)
-+
-+ifeq ($(enable_shared),yes)
-+lib2funcs-s-o = $(patsubst %,%_s$(objext),$(lib2funcs))
-+$(lib2funcs-s-o): %_s$(objext): $(srcdir)/libgcc2.c
-+ $(gcc_s_compile) -DL$* -c $<
-+libgcc-s-objects += $(lib2funcs-s-o)
-+endif
-+
-+ifneq ($(LIB2_SIDITI_CONV_FUNCS),)
-+# Build libgcc2.c for each conversion function, with a specific
-+# L definition and LIBGCC2_UNITS_PER_WORD setting. The DImode
-+# functions are built with a wordsize of 4; the TImode functions are
-+# built with the same labels, but a wordsize of 8.
-+
-+sifuncs := $(filter-out $(LIB2FUNCS_EXCLUDE),$(subst XX,si,$(swfloatfuncs)))
-+difuncs := $(filter-out $(LIB2FUNCS_EXCLUDE),$(subst XX,di,$(dwfloatfuncs)))
-+tifuncs := $(filter-out $(LIB2FUNCS_EXCLUDE),$(subst XX,ti,$(dwfloatfuncs)))
-+
-+iter-items := $(sifuncs) $(difuncs) $(tifuncs)
-+iter-labels := $(sifuncs) $(difuncs) $(difuncs)
-+iter-sizes := $(patsubst %,4,$(sifuncs) $(difuncs)) $(patsubst %,8,$(tifuncs))
-+
-+include $(srcdir)/empty.mk $(patsubst %,$(srcdir)/siditi-object.mk,$(iter-items))
-+
-+libgcc-objects += $(patsubst %,%$(objext),$(sifuncs) $(difuncs) $(tifuncs))
-+ifeq ($(enable_shared),yes)
-+libgcc-s-objects += $(patsubst %,%_s$(objext),$(sifuncs) $(difuncs) $(tifuncs))
-+endif
-+endif
-+
-+# Build LIB2_DIVMOD_FUNCS.
-+lib2-divmod-o = $(patsubst %,%$(objext),$(LIB2_DIVMOD_FUNCS))
-+$(lib2-divmod-o): %$(objext): $(srcdir)/libgcc2.c
-+ $(gcc_compile) -DL$* -c $< \
-+ -fexceptions -fnon-call-exceptions $(vis_hide)
-+libgcc-objects += $(lib2-divmod-o)
-+
-+ifeq ($(enable_shared),yes)
-+lib2-divmod-s-o = $(patsubst %,%_s$(objext),$(LIB2_DIVMOD_FUNCS))
-+$(lib2-divmod-s-o): %_s$(objext): $(srcdir)/libgcc2.c
-+ $(gcc_s_compile) -DL$* -c $< \
-+ -fexceptions -fnon-call-exceptions
-+libgcc-s-objects += $(lib2-divmod-s-o)
-+endif
-+
-+ifeq ($(TPBIT),)
-+# _sf_to_tf and _df_to_tf require tp-bit.c being compiled in.
-+FPBIT_FUNCS := $(filter-out _sf_to_tf,$(FPBIT_FUNCS))
-+DPBIT_FUNCS := $(filter-out _df_to_tf,$(DPBIT_FUNCS))
-+endif
-+
-+FPBIT_FUNCS := $(filter-out $(LIB2FUNCS_EXCLUDE),$(FPBIT_FUNCS))
-+DPBIT_FUNCS := $(filter-out $(LIB2FUNCS_EXCLUDE),$(DPBIT_FUNCS))
-+TPBIT_FUNCS := $(filter-out $(LIB2FUNCS_EXCLUDE),$(TPBIT_FUNCS))
-+
-+fpbit-src := $(srcdir)/fp-bit.c
-+
-+# Build FPBIT.
-+ifneq ($(FPBIT),)
-+fpbit-o = $(patsubst %,%$(objext),$(FPBIT_FUNCS))
-+$(fpbit-o): %$(objext): $(fpbit-src)
-+ $(gcc_compile) -DFINE_GRAINED_LIBRARIES -DL$* -DFLOAT $(FPBIT_CFLAGS) -c $< $(vis_hide)
-+libgcc-objects += $(fpbit-o)
-+
-+ifeq ($(enable_shared),yes)
-+fpbit-s-o = $(patsubst %,%_s$(objext),$(FPBIT_FUNCS))
-+$(fpbit-s-o): %_s$(objext): $(fpbit-src)
-+ $(gcc_s_compile) -DFINE_GRAINED_LIBRARIES -DL$* -DFLOAT $(FPBIT_CFLAGS) -c $<
-+libgcc-s-objects += $(fpbit-s-o)
-+endif
-+endif
-+
-+# Build DPBIT.
-+ifneq ($(DPBIT),)
-+dpbit-o = $(patsubst %,%$(objext),$(DPBIT_FUNCS))
-+$(dpbit-o): %$(objext): $(fpbit-src)
-+ $(gcc_compile) -DFINE_GRAINED_LIBRARIES -DL$* $(DPBIT_CFLAGS) -c $< $(vis_hide)
-+libgcc-objects += $(dpbit-o)
-+
-+ifeq ($(enable_shared),yes)
-+dpbit-s-o = $(patsubst %,%_s$(objext),$(DPBIT_FUNCS))
-+$(dpbit-s-o): %_s$(objext): $(fpbit-src)
-+ $(gcc_s_compile) -DFINE_GRAINED_LIBRARIES -DL$* $(DPBIT_CFLAGS) -c $<
-+libgcc-s-objects += $(dpbit-s-o)
-+endif
-+endif
-+
-+# Build TPBIT.
-+ifneq ($(TPBIT),)
-+tpbit-o = $(patsubst %,%$(objext),$(TPBIT_FUNCS))
-+$(tpbit-o): %$(objext): $(fpbit-src)
-+ $(gcc_compile) -DFINE_GRAINED_LIBRARIES -DL$* -DTFLOAT $(TPBIT_CFLAGS) -c $< $(vis_hide)
-+libgcc-objects += $(tpbit-o)
-+
-+ifeq ($(enable_shared),yes)
-+tpbit-s-o = $(patsubst %,%_s$(objext),$(TPBIT_FUNCS))
-+$(tpbit-s-o): %_s$(objext): $(fpbit-src)
-+ $(gcc_s_compile) -DFINE_GRAINED_LIBRARIES -DL$* -DTFLOAT $(TPBIT_CFLAGS) -c $<
-+libgcc-s-objects += $(tpbit-s-o)
-+endif
-+endif
-+
-+# Build decimal floating point support.
-+ifeq ($(decimal_float),yes)
-+
-+# If $DFP_ENABLE is set, then we want all data type sizes.
-+ifneq ($(DFP_ENABLE),)
-+D32PBIT = 1
-+D64PBIT = 1
-+D128PBIT = 1
-+endif
-+
-+dfp-filenames =
-+ifneq ($(D32PBIT)$(D64PBIT)$(D128PBIT),)
-+ifeq ($(enable_decimal_float),bid)
-+dfp-filenames += bid_decimal_globals bid_decimal_data \
-+ bid_binarydecimal bid_convert_data \
-+ _isinfd32 _isinfd64 _isinfd128 bid64_noncomp \
-+ bid128_noncomp bid128_fma bid_round bid_from_int \
-+ bid64_add bid128_add bid64_div bid128_div \
-+ bid64_mul bid128_mul bid64_compare bid128_compare \
-+ bid128 bid32_to_bid64 bid32_to_bid128 bid64_to_bid128 \
-+ bid64_to_int32 bid64_to_int64 \
-+ bid64_to_uint32 bid64_to_uint64 \
-+ bid128_to_int32 bid128_to_int64 \
-+ bid128_to_uint32 bid128_to_uint64
-+else
-+dfp-filenames += decContext decNumber decExcept decRound decLibrary decDouble decPacked decQuad decSingle
-+endif
-+endif
-+
-+dfp-objects = $(patsubst %,%$(objext),$(dfp-filenames))
-+ifeq ($(enable_decimal_float),bid)
-+$(dfp-objects): %$(objext): $(srcdir)/config/libbid/%.c
-+else
-+$(dfp-objects): %$(objext): $(srcdir)/../libdecnumber/%.c
-+endif
-+ $(gcc_compile) -c $<
-+libgcc-objects += $(dfp-objects)
-+
-+decbits-filenames =
-+ifneq ($(enable_decimal_float),bid)
-+ifneq ($(D32PBIT),)
-+decbits-filenames += decimal32
-+endif
-+
-+ifneq ($(D64PBIT),)
-+decbits-filenames += decimal64
-+endif
-+
-+ifneq ($(D128PBIT),)
-+decbits-filenames += decimal128
-+endif
-+endif
-+
-+decbits-objects = $(patsubst %,%$(objext),$(decbits-filenames))
-+ifeq ($(enable_decimal_float),bid)
-+$(decbits-objects): %$(objext): $(srcdir)/config/libbid/%.c
-+else
-+$(decbits-objects): %$(objext): $(srcdir)/../libdecnumber/$(enable_decimal_float)/%.c
-+endif
-+ $(gcc_compile) -c $<
-+libgcc-objects += $(decbits-objects)
-+
-+# Next build individual support functions.
-+D32PBIT_FUNCS = _addsub_sd _div_sd _mul_sd _plus_sd _minus_sd \
-+ _eq_sd _ne_sd _lt_sd _gt_sd _le_sd _ge_sd \
-+ _sd_to_si _sd_to_di _sd_to_usi _sd_to_udi \
-+ _si_to_sd _di_to_sd _usi_to_sd _udi_to_sd \
-+ _sd_to_sf _sd_to_df _sd_to_xf _sd_to_tf \
-+ _sf_to_sd _df_to_sd _xf_to_sd _tf_to_sd \
-+ _sd_to_dd _sd_to_td _unord_sd _conv_sd
-+
-+D64PBIT_FUNCS = _addsub_dd _div_dd _mul_dd _plus_dd _minus_dd \
-+ _eq_dd _ne_dd _lt_dd _gt_dd _le_dd _ge_dd \
-+ _dd_to_si _dd_to_di _dd_to_usi _dd_to_udi \
-+ _si_to_dd _di_to_dd _usi_to_dd _udi_to_dd \
-+ _dd_to_sf _dd_to_df _dd_to_xf _dd_to_tf \
-+ _sf_to_dd _df_to_dd _xf_to_dd _tf_to_dd \
-+ _dd_to_sd _dd_to_td _unord_dd _conv_dd
-+
-+D128PBIT_FUNCS = _addsub_td _div_td _mul_td _plus_td _minus_td \
-+ _eq_td _ne_td _lt_td _gt_td _le_td _ge_td \
-+ _td_to_si _td_to_di _td_to_usi _td_to_udi \
-+ _si_to_td _di_to_td _usi_to_td _udi_to_td \
-+ _td_to_sf _td_to_df _td_to_xf _td_to_tf \
-+ _sf_to_td _df_to_td _xf_to_td _tf_to_td \
-+ _td_to_sd _td_to_dd _unord_td _conv_td
-+
-+ifeq ($(enable_decimal_float),bid)
-+ifneq ($(D32PBIT),)
-+D32PBIT_FUNCS:=$(filter-out _plus_sd _minus_sd _conv_sd, $(D32PBIT_FUNCS))
-+endif
-+
-+ifneq ($(D64PBIT),)
-+D64PBIT_FUNCS:=$(filter-out _plus_dd _minus_dd _conv_dd, $(D64PBIT_FUNCS))
-+endif
-+
-+ifneq ($(D128PBIT),)
-+D128PBIT_FUNCS:=$(filter-out _plus_td _minus_td _conv_td, $(D128PBIT_FUNCS))
-+endif
-+endif
-+
-+ifneq ($(D32PBIT),)
-+d32pbit-o = $(patsubst %,%$(objext),$(D32PBIT_FUNCS))
-+ifeq ($(enable_decimal_float),bid)
-+$(d32pbit-o): %$(objext): $(srcdir)/config/libbid/%.c
-+else
-+$(d32pbit-o): %$(objext): $(srcdir)/dfp-bit.c
-+endif
-+ $(gcc_compile) -DFINE_GRAINED_LIBRARIES -DL$* -DWIDTH=32 -c $<
-+libgcc-objects += $(d32pbit-o)
-+endif
-+
-+ifneq ($(D64PBIT),)
-+d64pbit-o = $(patsubst %,%$(objext),$(D64PBIT_FUNCS))
-+ifeq ($(enable_decimal_float),bid)
-+$(d64pbit-o): %$(objext): $(srcdir)/config/libbid/%.c
-+else
-+$(d64pbit-o): %$(objext): $(srcdir)/dfp-bit.c
-+endif
-+ $(gcc_compile) -DFINE_GRAINED_LIBRARIES -DL$* -DWIDTH=64 -c $<
-+libgcc-objects += $(d64pbit-o)
-+endif
-+
-+ifneq ($(D128PBIT),)
-+d128pbit-o = $(patsubst %,%$(objext),$(D128PBIT_FUNCS))
-+ifeq ($(enable_decimal_float),bid)
-+$(d128pbit-o): %$(objext): $(srcdir)/config/libbid/%.c
-+else
-+$(d128pbit-o): %$(objext): $(srcdir)/dfp-bit.c
-+endif
-+ $(gcc_compile) -DFINE_GRAINED_LIBRARIES -DL$* -DWIDTH=128 -c $<
-+libgcc-objects += $(d128pbit-o)
-+endif
-+
-+endif
-+
-+ifeq ($(SYNC),yes)
-+libgcc-sync-size-funcs := $(foreach op, add sub or and xor nand, \
-+ sync_fetch_and_$(op) \
-+ sync_$(op)_and_fetch) \
-+ sync_bool_compare_and_swap \
-+ sync_val_compare_and_swap \
-+ sync_lock_test_and_set
-+
-+libgcc-sync-size-funcs := $(foreach prefix, $(libgcc-sync-size-funcs), \
-+ $(foreach suffix, 1 2 4 8 16, \
-+ $(prefix)_$(suffix)))
-+
-+libgcc-sync-size-funcs-o = $(patsubst %,%$(objext),$(libgcc-sync-size-funcs))
-+$(libgcc-sync-size-funcs-o): %$(objext): $(srcdir)/sync.c
-+ $(gcc_compile) $(SYNC_CFLAGS) \
-+ -DFN=`echo "$*" | sed 's/_[^_]*$$//'` \
-+ -DSIZE=`echo "$*" | sed 's/.*_//'` \
-+ -c $< $(vis_hide)
-+libgcc-objects += $(libgcc-sync-size-funcs-o)
-+
-+libgcc-sync-funcs := sync_synchronize
-+
-+libgcc-sync-funcs-o = $(patsubst %,%$(objext),$(libgcc-sync-funcs))
-+$(libgcc-sync-funcs-o): %$(objext): $(srcdir)/sync.c
-+ $(gcc_compile) $(SYNC_CFLAGS) \
-+ -DL$* \
-+ -c $< $(vis_hide)
-+libgcc-objects += $(libgcc-sync-funcs-o)
-+
-+ifeq ($(enable_shared),yes)
-+libgcc-sync-size-funcs-s-o = $(patsubst %,%_s$(objext), \
-+ $(libgcc-sync-size-funcs))
-+$(libgcc-sync-size-funcs-s-o): %_s$(objext): $(srcdir)/sync.c
-+ $(gcc_s_compile) $(SYNC_CFLAGS) \
-+ -DFN=`echo "$*" | sed 's/_[^_]*$$//'` \
-+ -DSIZE=`echo "$*" | sed 's/.*_//'` \
-+ -c $<
-+libgcc-s-objects += $(libgcc-sync-size-funcs-s-o)
-+
-+libgcc-sync-funcs-s-o = $(patsubst %,%_s$(objext),$(libgcc-sync-funcs))
-+$(libgcc-sync-funcs-s-o): %_s$(objext): $(srcdir)/sync.c
-+ $(gcc_s_compile) $(SYNC_CFLAGS) \
-+ -DL$* \
-+ -c $<
-+libgcc-s-objects += $(libgcc-sync-funcs-s-o)
-+endif
-+endif
-+
-+# Build fixed-point support.
-+ifeq ($(fixed_point),yes)
-+
-+# Generate permutations of function name and mode
-+fixed-labels := $(shell $(SHELL) $(srcdir)/gen-fixed.sh arith labels)
-+fixed-funcs := $(shell $(SHELL) $(srcdir)/gen-fixed.sh arith funcs)
-+fixed-modes := $(shell $(SHELL) $(srcdir)/gen-fixed.sh arith modes)
-+
-+# Generate the rules for each arithmetic function
-+iter-items := $(fixed-funcs)
-+iter-labels := $(fixed-labels)
-+iter-from := $(fixed-modes)
-+iter-to := $(fixed-modes)
-+include $(srcdir)/empty.mk $(patsubst %,$(srcdir)/fixed-obj.mk,$(iter-items))
-+
-+# Add arithmetic functions to list of objects to be built
-+libgcc-objects += $(patsubst %,%$(objext),$(fixed-funcs))
-+ifeq ($(enable_shared),yes)
-+libgcc-s-objects += $(patsubst %,%_s$(objext),$(fixed-funcs))
-+endif
-+
-+# Convert from or to fractional
-+fixed-conv-funcs := $(shell $(SHELL) $(srcdir)/gen-fixed.sh conv funcs)
-+fixed-conv-labels := $(shell $(SHELL) $(srcdir)/gen-fixed.sh conv labels)
-+fixed-conv-from := $(shell $(SHELL) $(srcdir)/gen-fixed.sh conv from)
-+fixed-conv-to := $(shell $(SHELL) $(srcdir)/gen-fixed.sh conv to)
-+
-+# Generate the make rules for each conversion function
-+iter-items := $(fixed-conv-funcs)
-+iter-labels := $(fixed-conv-labels)
-+iter-from := $(fixed-conv-from)
-+iter-to := $(fixed-conv-to)
-+include $(srcdir)/empty.mk $(patsubst %,$(srcdir)/fixed-obj.mk,$(iter-items))
-+
-+# Add conversion functions to list of objects to be built
-+libgcc-objects += $(patsubst %,%$(objext),$(fixed-conv-funcs))
-+ifeq ($(enable_shared),yes)
-+libgcc-s-objects += $(patsubst %,%_s$(objext),$(fixed-conv-funcs))
-+endif
-+
-+endif
-+
-+# Build LIB2ADD and LIB2ADD_ST.
-+ifneq ($(filter-out %.c %.S %.asm,$(LIB2ADD) $(LIB2ADD_ST)),)
-+$(error Unsupported files in LIB2ADD or LIB2ADD_ST.)
-+endif
-+
-+libgcc-objects += $(addsuffix $(objext),$(basename $(notdir $(LIB2ADD))))
-+libgcc-objects += $(addsuffix $(objext),$(basename $(notdir $(LIB2ADD_ST))))
-+
-+c_flags :=
-+iter-items := $(LIB2ADD) $(LIB2ADD_ST)
-+include $(iterator)
-+
-+ifeq ($(enable_shared),yes)
-+libgcc-s-objects += $(addsuffix _s$(objext),$(basename $(notdir $(LIB2ADD))))
-+endif
-+
-+# Build LIB2ADDEH, LIB2ADDEHSTATIC, and LIB2ADDEHSHARED. If we don't have
-+# libgcc_eh.a, only LIB2ADDEH matters. If we do, only LIB2ADDEHSTATIC and
-+# LIB2ADDEHSHARED matter. (Usually all three are identical.)
-+
-+c_flags := -fexceptions
-+
-+ifeq ($(enable_shared),yes)
-+
-+libgcc-eh-objects += $(addsuffix $(objext),$(basename $(notdir $(LIB2ADDEHSTATIC))))
-+libgcc-s-objects += $(addsuffix _s$(objext),$(basename $(notdir $(LIB2ADDEHSHARED))))
-+
-+iter-items := $(sort $(LIB2ADDEHSTATIC) $(LIB2ADDEHSHARED))
-+include $(iterator)
-+
-+else
-+# Not shared. LIB2ADDEH are added to libgcc.a.
-+
-+libgcc-objects += $(addsuffix $(objext),$(basename $(notdir $(LIB2ADDEH))))
-+
-+iter-items := $(LIB2ADDEH)
-+include $(iterator)
-+
-+endif
-+
-+# Build LIBUNWIND. Use -fno-exceptions so that the unwind library does
-+# not generate calls to __gcc_personality_v0.
-+
-+c_flags := -fno-exceptions
-+
-+libunwind-objects += $(addsuffix $(objext),$(basename $(notdir $(LIBUNWIND))))
-+
-+ifeq ($(enable_shared),yes)
-+libunwind-s-objects += $(addsuffix _s$(objext),$(basename $(notdir $(LIBUNWIND))))
-+endif
-+
-+iter-items := $(LIBUNWIND)
-+include $(iterator)
-+
-+# Build libgcov components.
-+
-+# Defined in libgcov.c, included only in gcov library
-+LIBGCOV = _gcov _gcov_merge_add _gcov_merge_single _gcov_merge_delta \
-+ _gcov_fork _gcov_execl _gcov_execlp _gcov_execle \
-+ _gcov_execv _gcov_execvp _gcov_execve \
-+ _gcov_interval_profiler _gcov_pow2_profiler _gcov_one_value_profiler \
-+ _gcov_indirect_call_profiler _gcov_average_profiler _gcov_ior_profiler \
-+ _gcov_merge_ior
-+
-+libgcov-objects = $(patsubst %,%$(objext),$(LIBGCOV))
-+
-+$(libgcov-objects): %$(objext): $(srcdir)/libgcov.c
-+ $(gcc_compile) -DL$* -c $(srcdir)/libgcov.c
-+
-+
-+# Static libraries.
-+libgcc.a: $(libgcc-objects)
-+libgcov.a: $(libgcov-objects)
-+libunwind.a: $(libunwind-objects)
-+libgcc_eh.a: $(libgcc-eh-objects)
-+
-+libgcc.a libgcov.a libunwind.a libgcc_eh.a:
-+ -rm -f $@
-+
-+ objects="$(objects)"; \
-+ if test -z "$$objects"; then \
-+ echo 'int __libgcc_eh_dummy;' > eh_dummy.c; \
-+ $(gcc_compile_bare) $(vis_hide) -c eh_dummy.c \
-+ -o eh_dummy$(objext); \
-+ objects=eh_dummy$(objext); \
-+ fi; \
-+ $(AR_CREATE_FOR_TARGET) $@ $$objects
-+
-+ $(RANLIB) $@
-+
-+all: libgcc.a libgcov.a
-+
-+ifneq ($(LIBUNWIND),)
-+all: libunwind.a
-+libgcc_s$(SHLIB_EXT): libunwind$(SHLIB_EXT)
-+endif
-+
-+ifeq ($(enable_shared),yes)
-+all: libgcc_eh.a libgcc_s$(SHLIB_EXT)
-+ifneq ($(LIBUNWIND),)
-+all: libunwind$(SHLIB_EXT)
-+endif
-+endif
-+
-+ifeq ($(enable_shared),yes)
-+
-+# Map-file generation.
-+ifneq ($(SHLIB_MKMAP),)
-+libgcc.map: $(SHLIB_MKMAP) $(SHLIB_MAPFILES) $(libgcc-s-objects)
-+ { $(NM) $(SHLIB_NM_FLAGS) $(libgcc-s-objects); echo %%; \
-+ cat $(SHLIB_MAPFILES) \
-+ | sed -e '/^[ ]*#/d' \
-+ -e 's/^%\(if\|else\|elif\|endif\|define\)/#\1/' \
-+ | $(gcc_compile_bare) -E -xassembler-with-cpp -; \
-+ } | $(AWK) -f $(SHLIB_MKMAP) $(SHLIB_MKMAP_OPTS) > tmp-$@
-+ mv tmp-$@ $@
-+libgcc_s$(SHLIB_EXT): libgcc.map
-+mapfile = libgcc.map
-+endif
-+
-+libgcc-std.ver: $(srcdir)/libgcc-std.ver.in
-+ sed -e 's/__PFX__/$(LIBGCC_VER_GNU_PREFIX)/g' \
-+ -e 's/__FIXPTPFX__/$(LIBGCC_VER_FIXEDPOINT_GNU_PREFIX)/g' < $< > $@
-+
-+libgcc_s$(SHLIB_EXT): $(libgcc-s-objects) $(extra-parts)
-+ # @multilib_flags@ is still needed because this may use
-+ # $(GCC_FOR_TARGET) and $(LIBGCC2_CFLAGS) directly.
-+ # @multilib_dir@ is not really necessary, but sometimes it has
-+ # more uses than just a directory name.
-+ $(mkinstalldirs) $(MULTIDIR)
-+ $(subst @multilib_flags@,$(CFLAGS) -B./,$(subst \
-+ @multilib_dir@,$(MULTIDIR),$(subst \
-+ @shlib_objs@,$(objects),$(subst \
-+ @shlib_base_name@,libgcc_s,$(subst \
-+ @shlib_map_file@,$(mapfile),$(subst \
-+ @shlib_slibdir_qual@,$(MULTIOSSUBDIR),$(subst \
-+ @shlib_slibdir@,$(shlib_slibdir),$(SHLIB_LINK))))))))
-+
-+libunwind$(SHLIB_EXT): $(libunwind-s-objects) $(extra-parts)
-+ # @multilib_flags@ is still needed because this may use
-+ # $(GCC_FOR_TARGET) and $(LIBGCC2_CFLAGS) directly.
-+ # @multilib_dir@ is not really necessary, but sometimes it has
-+ # more uses than just a directory name.
-+ $(mkinstalldirs) $(MULTIDIR)
-+ $(subst @multilib_flags@,$(CFLAGS) -B./,$(subst \
-+ @multilib_dir@,$(MULTIDIR),$(subst \
-+ @shlib_objs@,$(objects),$(subst \
-+ @shlib_base_name@,libunwind,$(subst \
-+ @shlib_slibdir_qual@,$(MULTIOSSUBDIR),$(SHLIBUNWIND_LINK))))))
-+
-+endif
-+
-+# Build the standard GCC startfiles and endfiles.
-+ALL_CRT_CFLAGS = $(CFLAGS) $(CRTSTUFF_CFLAGS) $(INCLUDES)
-+crt_compile = $(CC) $(ALL_CRT_CFLAGS) -o $@ $(compile_deps)
-+
-+ifeq ($(CUSTOM_CRTSTUFF),)
-+# Compile two additional files that are linked with every program
-+# linked using GCC on systems using COFF or ELF, for the sake of C++
-+# constructors.
-+crtbegin$(objext): $(srcdir)/crtstuff.c
-+ $(crt_compile) $(CRTSTUFF_T_CFLAGS) -c $< -DCRT_BEGIN
-+
-+crtend$(objext): $(srcdir)/crtstuff.c
-+ $(crt_compile) $(CRTSTUFF_T_CFLAGS) -c $< -DCRT_END
-+
-+# These are versions of crtbegin and crtend for shared libraries.
-+crtbeginS$(objext): $(srcdir)/crtstuff.c
-+ $(crt_compile) $(CRTSTUFF_T_CFLAGS_S) -c $< -DCRT_BEGIN -DCRTSTUFFS_O
-+
-+crtendS$(objext): $(srcdir)/crtstuff.c
-+ $(crt_compile) $(CRTSTUFF_T_CFLAGS_S) -c $< -DCRT_END -DCRTSTUFFS_O
-+
-+# This is a version of crtbegin for -static links.
-+crtbeginT$(objext): $(srcdir)/crtstuff.c
-+ $(crt_compile) $(CRTSTUFF_T_CFLAGS) -c $< -DCRT_BEGIN -DCRTSTUFFT_O
-+endif
-+
-+ifeq ($(CUSTOM_CRTIN),)
-+# -x assembler-with-cpp is only needed on case-insensitive filesystem.
-+crti$(objext): $(srcdir)/config/$(cpu_type)/crti.S
-+ $(crt_compile) -c -x assembler-with-cpp $<
-+
-+crtn$(objext): $(srcdir)/config/$(cpu_type)/crtn.S
-+ $(crt_compile) -c -x assembler-with-cpp $<
-+endif
-+
-+# Build extra startfiles in the libgcc directory.
-+.PHONY: libgcc-extra-parts
-+libgcc-extra-parts: $(EXTRA_PARTS)
-+
-+ # Early copyback; see "all" above for the rationale. The
-+ # early copy is necessary so that the gcc -B options find
-+ # the right startup files when linking shared libgcc.
-+ $(mkinstalldirs) $(gcc_objdir)$(MULTISUBDIR)
-+ parts="$(EXTRA_PARTS)"; \
-+ for file in $$parts; do \
-+ rm -f $(gcc_objdir)$(MULTISUBDIR)/$$file; \
-+ $(INSTALL_DATA) $$file $(gcc_objdir)$(MULTISUBDIR)/; \
-+ case $$file in \
-+ *.a) \
-+ $(RANLIB) $(gcc_objdir)$(MULTISUBDIR)/$$file ;; \
-+ esac; \
-+ done
-+
-+all: $(extra-parts)
-+
-+$(libgcc-objects) $(libgcc-s-objects) $(libgcc-eh-objects) \
-+ $(libgcov-objects) \
-+ $(libunwind-objects) $(libunwind-s-objects) \
-+ $(EXTRA_PARTS): libgcc_tm.h
-+
-+# Copy unwind.h to the place where gcc will look for it at build-time
-+install-unwind_h-forbuild:
-+ dest=$(gcc_objdir)/include/tmp$$$$-unwind.h; \
-+ cp unwind.h $$dest; \
-+ chmod a+r $$dest; \
-+ sh $(srcdir)/../move-if-change $$dest $(gcc_objdir)/include/unwind.h
-+
-+# Copy unwind.h to the place where gcc will look at run-time, once installed
-+#
-+# This is redundant with the internal copy above when using a regular toplevel
-+# "install" target, because gcc's install will copy to the destination as well.
-+#
-+# This is however useful for "install-no-fixincludes" case, when only the gcc
-+# internal headers are copied by gcc's install.
-+install-unwind_h:
-+ $(mkinstalldirs) $(DESTDIR)$(libsubdir)/include
-+ $(INSTALL_DATA) unwind.h $(DESTDIR)$(libsubdir)/include
-+
-+all: install-unwind_h-forbuild
-+
-+# Documentation targets (empty).
-+.PHONY: info html dvi pdf install-info install-html install-pdf
-+
-+info:
-+install-info:
-+html:
-+install-html:
-+dvi:
-+pdf:
-+install-pdf:
-+
-+# Install rules. These do not depend on "all", so that they can be invoked
-+# recursively from it.
-+install-libunwind:
-+ $(mkinstalldirs) $(DESTDIR)$(inst_slibdir)
-+
-+ # NOTE: Maybe this should go into $(inst_libdir), but this
-+ # is where the old mklibgcc.in put it.
-+ $(INSTALL_DATA) libunwind.a $(DESTDIR)$(inst_slibdir)/
-+ chmod 644 $(DESTDIR)$(inst_slibdir)/libunwind.a
-+ $(RANLIB) $(DESTDIR)$(inst_slibdir)/libunwind.a
-+
-+ $(subst @multilib_dir@,$(MULTIDIR),$(subst \
-+ @shlib_base_name@,libunwind,$(subst \
-+ @shlib_slibdir_qual@,$(MULTIOSSUBDIR),$(SHLIBUNWIND_INSTALL))))
-+
-+install-shared:
-+ $(mkinstalldirs) $(DESTDIR)$(inst_libdir)
-+
-+ $(INSTALL_DATA) libgcc_eh.a $(DESTDIR)$(inst_libdir)/
-+ chmod 644 $(DESTDIR)$(inst_libdir)/libgcc_eh.a
-+ $(RANLIB) $(DESTDIR)$(inst_libdir)/libgcc_eh.a
-+
-+ $(subst @multilib_dir@,$(MULTIDIR),$(subst \
-+ @shlib_base_name@,libgcc_s,$(subst \
-+ @shlib_slibdir_qual@,$(MULTIOSSUBDIR),$(SHLIB_INSTALL))))
-+
-+install-leaf: $(install-shared) $(install-libunwind)
-+ $(mkinstalldirs) $(DESTDIR)$(inst_libdir)
-+
-+ $(INSTALL_DATA) libgcc.a $(DESTDIR)$(inst_libdir)/
-+ chmod 644 $(DESTDIR)$(inst_libdir)/libgcc.a
-+ $(RANLIB) $(DESTDIR)$(inst_libdir)/libgcc.a
-+ $(INSTALL_DATA) libgcov.a $(DESTDIR)$(inst_libdir)/
-+ chmod 644 $(DESTDIR)$(inst_libdir)/libgcov.a
-+ $(RANLIB) $(DESTDIR)$(inst_libdir)/libgcov.a
-+
-+ parts="$(INSTALL_PARTS)"; \
-+ for file in $$parts; do \
-+ rm -f $(DESTDIR)$(inst_libdir)/$$file; \
-+ $(INSTALL_DATA) $$file $(DESTDIR)$(inst_libdir)/; \
-+ case $$file in \
-+ *.a) \
-+ $(RANLIB) $(gcc_objdir)$(MULTISUBDIR)/$$file ;; \
-+ esac; \
-+ done
-+
-+install: install-leaf install-unwind_h
-+ @: $(MAKE) ; $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
-+
-+install-strip: install
-+
-+.PHONY: install install-shared install-libunwind install-strip
-+.PHONY: install-unwind_h install-unwind_h-forbuild
-+
-+# Don't export variables to the environment, in order to not confuse
-+# configure.
-+.NOEXPORT:
-+
-+include $(srcdir)/empty.mk $(wildcard *.dep)
-diff -NBaur gcc-4.7.2/libgcc/crtstuff.c gcc-4.7.2-arm/libgcc/crtstuff.c
+diff -Nbaur gcc-4.7.2/libgcc/crtstuff.c gcc-4.7.2-arm/libgcc/crtstuff.c
--- gcc-4.7.2/libgcc/crtstuff.c 2011-12-06 21:35:41.000000000 +0000
+++ gcc-4.7.2-arm/libgcc/crtstuff.c 2012-12-16 00:47:39.000000000 +0000
@@ -49,7 +49,7 @@
diff --git a/dkarm-eabi/patches/gdb-7.5.1.patch b/dkarm-eabi/patches/gdb-7.5.1.patch
index 6311406..b4c0e91 100644
--- a/dkarm-eabi/patches/gdb-7.5.1.patch
+++ b/dkarm-eabi/patches/gdb-7.5.1.patch
@@ -14,2198 +14,6 @@ diff -Nbaur gdb-7.5.1/gdb/Makefile.in gdb-7.5.1-arm/gdb/Makefile.in
@GMAKE_TRUE@else
@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
@GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-diff -Nbaur gdb-7.5.1/gdb/Makefile.in.orig gdb-7.5.1-arm/gdb/Makefile.in.orig
---- gdb-7.5.1/gdb/Makefile.in.orig 1970-01-01 01:00:00.000000000 +0100
-+++ gdb-7.5.1-arm/gdb/Makefile.in.orig 2012-07-02 16:29:33.000000000 +0100
-@@ -0,0 +1,2188 @@
-+# Copyright (C) 1989-2012 Free Software Foundation, Inc.
-+
-+# This file is part of GDB.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 3 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program. If not, see .
-+
-+prefix = @prefix@
-+exec_prefix = @exec_prefix@
-+
-+host_alias = @host_alias@
-+target_alias = @target_alias@
-+program_transform_name = @program_transform_name@
-+bindir = @bindir@
-+libdir = @libdir@
-+tooldir = $(libdir)/$(target_alias)
-+
-+datadir = @datadir@
-+localedir = @localedir@
-+mandir = @mandir@
-+man1dir = $(mandir)/man1
-+man2dir = $(mandir)/man2
-+man3dir = $(mandir)/man3
-+man4dir = $(mandir)/man4
-+man5dir = $(mandir)/man5
-+man6dir = $(mandir)/man6
-+man7dir = $(mandir)/man7
-+man8dir = $(mandir)/man8
-+man9dir = $(mandir)/man9
-+infodir = @infodir@
-+datarootdir = @datarootdir@
-+docdir = @docdir@
-+htmldir = @htmldir@
-+pdfdir = @pdfdir@
-+includedir = @includedir@
-+
-+# This can be referenced by `LIBINTL' as computed by
-+# ZW_GNU_GETTEXT_SISTER_DIR.
-+top_builddir = .
-+
-+SHELL = @SHELL@
-+EXEEXT = @EXEEXT@
-+
-+AWK = @AWK@
-+LN_S = @LN_S@
-+
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+INSTALL_DATA = @INSTALL_DATA@
-+
-+DESTDIR =
-+
-+AR = @AR@
-+AR_FLAGS = qv
-+RANLIB = @RANLIB@
-+DLLTOOL = @DLLTOOL@
-+WINDRES = @WINDRES@
-+MIG = @MIG@
-+
-+XGETTEXT = @XGETTEXT@
-+GMSGFMT = @GMSGFMT@
-+MSGMERGE = msgmerge
-+
-+PACKAGE = @PACKAGE@
-+CATALOGS = @CATALOGS@
-+
-+# If you are compiling with GCC, make sure that either 1) You have the
-+# fixed include files where GCC can reach them, or 2) You use the
-+# -traditional flag. Otherwise the ioctl calls in inflow.c
-+# will be incorrectly compiled. The "fixincludes" script in the gcc
-+# distribution will fix your include files up.
-+CC=@CC@
-+
-+# Dependency tracking information.
-+DEPMODE = @CCDEPMODE@
-+DEPDIR = @DEPDIR@
-+depcomp = $(SHELL) $(srcdir)/../depcomp
-+
-+# Note that these are overridden by GNU make-specific code below if
-+# GNU make is used. The overrides implement dependency tracking.
-+COMPILE.pre = $(CC)
-+COMPILE.post = -c -o $@
-+COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
-+POSTCOMPILE = @true
-+
-+# Directory containing source files.
-+srcdir = @srcdir@
-+VPATH = @srcdir@
-+
-+YACC=@YACC@
-+
-+# This is used to rebuild ada-lex.c from ada-lex.l. If the program is
-+# not defined, but ada-lex.c is present, compilation will continue,
-+# possibly with a warning.
-+FLEX = flex
-+
-+YLWRAP = $(srcdir)/../ylwrap
-+
-+# where to find makeinfo, preferably one designed for texinfo-2
-+MAKEINFO = @MAKEINFO@
-+MAKEINFOFLAGS = @MAKEINFOFLAGS@
-+MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
-+MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
-+
-+MAKEHTML = $(MAKEINFO_CMD) --html
-+MAKEHTMLFLAGS =
-+
-+# Set this up with gcc if you have gnu ld and the loader will print out
-+# line numbers for undefined references.
-+#CC_LD=gcc -static
-+CC_LD=$(CC)
-+
-+# Where is our "include" directory? Typically $(srcdir)/../include.
-+# This is essentially the header file directory for the library
-+# routines in libiberty.
-+INCLUDE_DIR = $(srcdir)/../include
-+INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
-+
-+# Where is the "-liberty" library? Typically in ../libiberty.
-+LIBIBERTY = ../libiberty/libiberty.a
-+
-+# Where is the BFD library? Typically in ../bfd.
-+BFD_DIR = ../bfd
-+BFD = $(BFD_DIR)/libbfd.a
-+BFD_SRC = $(srcdir)/$(BFD_DIR)
-+BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
-+
-+# Where is the decnumber library? Typically in ../libdecnumber.
-+LIBDECNUMBER_DIR = ../libdecnumber
-+LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
-+LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
-+LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
-+
-+# Where is the READLINE library? Typically in ../readline.
-+READLINE_DIR = ../readline
-+READLINE_SRC = $(srcdir)/$(READLINE_DIR)
-+READLINE = @READLINE@
-+READLINE_DEPS = @READLINE_DEPS@
-+READLINE_CFLAGS = @READLINE_CFLAGS@
-+
-+# Where is expat? This will be empty if expat was not available.
-+LIBEXPAT = @LIBEXPAT@
-+
-+WARN_CFLAGS = @WARN_CFLAGS@
-+WERROR_CFLAGS = @WERROR_CFLAGS@
-+GDB_WARN_CFLAGS = $(WARN_CFLAGS)
-+GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
-+
-+GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " \
-+ | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
-+
-+RDYNAMIC = @RDYNAMIC@
-+
-+# Where is the INTL library? Typically in ../intl.
-+INTL = @LIBINTL@
-+INTL_DEPS = @LIBINTL_DEP@
-+INTL_CFLAGS = @INCINTL@
-+
-+# Did the user give us a --with-gdb-datadir option?
-+GDB_DATADIR = @GDB_DATADIR@
-+
-+# Helper code from gnulib.
-+GNULIB_BUILDDIR = build-gnulib
-+LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
-+INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
-+
-+# Generated headers in the gnulib directory. These must be listed
-+# so that they are generated before other files are compiled.
-+GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
-+
-+#
-+# CLI sub directory definitons
-+#
-+SUBDIR_CLI_OBS = \
-+ cli-dump.o \
-+ cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
-+ cli-logging.o \
-+ cli-interp.o cli-utils.o
-+SUBDIR_CLI_SRCS = \
-+ cli/cli-dump.c \
-+ cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
-+ cli/cli-logging.c \
-+ cli/cli-interp.c cli/cli-utils.c
-+SUBDIR_CLI_DEPS =
-+SUBDIR_CLI_LDFLAGS=
-+SUBDIR_CLI_CFLAGS=
-+
-+#
-+# MI sub directory definitons
-+#
-+SUBDIR_MI_OBS = \
-+ mi-out.o mi-console.o \
-+ mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
-+ mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
-+ mi-cmd-info.o mi-interp.o \
-+ mi-main.o mi-parse.o mi-getopt.o
-+SUBDIR_MI_SRCS = \
-+ mi/mi-out.c mi/mi-console.c \
-+ mi/mi-cmds.c mi/mi-cmd-env.c \
-+ mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
-+ mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
-+ mi/mi-cmd-target.c mi/mi-cmd-info.c mi/mi-interp.c \
-+ mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c
-+SUBDIR_MI_DEPS =
-+SUBDIR_MI_LDFLAGS=
-+SUBDIR_MI_CFLAGS=
-+
-+#
-+# TUI sub directory definitions
-+#
-+
-+SUBDIR_TUI_OBS = \
-+ tui-command.o \
-+ tui-data.o \
-+ tui-disasm.o \
-+ tui-file.o \
-+ tui-hooks.o \
-+ tui-interp.o \
-+ tui-io.o \
-+ tui-layout.o \
-+ tui-out.o \
-+ tui-regs.o \
-+ tui-source.o \
-+ tui-stack.o \
-+ tui-win.o \
-+ tui-windata.o \
-+ tui-wingeneral.o \
-+ tui-winsource.o \
-+ tui.o
-+
-+SUBDIR_TUI_SRCS = \
-+ tui/tui-command.c \
-+ tui/tui-data.c \
-+ tui/tui-disasm.c \
-+ tui/tui-file.c \
-+ tui/tui-hooks.c \
-+ tui/tui-interp.c \
-+ tui/tui-io.c \
-+ tui/tui-layout.c \
-+ tui/tui-out.c \
-+ tui/tui-regs.c \
-+ tui/tui-source.c \
-+ tui/tui-stack.c \
-+ tui/tui-win.c \
-+ tui/tui-windata.c \
-+ tui/tui-wingeneral.c \
-+ tui/tui-winsource.c \
-+ tui/tui.c
-+
-+SUBDIR_TUI_DEPS =
-+SUBDIR_TUI_LDFLAGS=
-+SUBDIR_TUI_CFLAGS= \
-+ -DTUI=1
-+
-+#
-+# python sub directory definitons
-+#
-+SUBDIR_PYTHON_OBS = \
-+ python.o \
-+ py-auto-load.o \
-+ py-block.o \
-+ py-bpevent.o \
-+ py-breakpoint.o \
-+ py-cmd.o \
-+ py-continueevent.o \
-+ py-event.o \
-+ py-evtregistry.o \
-+ py-evts.o \
-+ py-exitedevent.o \
-+ py-finishbreakpoint.o \
-+ py-frame.o \
-+ py-function.o \
-+ py-inferior.o \
-+ py-infthread.o \
-+ py-lazy-string.o \
-+ py-newobjfileevent.o \
-+ py-objfile.o \
-+ py-param.o \
-+ py-prettyprint.o \
-+ py-progspace.o \
-+ py-signalevent.o \
-+ py-stopevent.o \
-+ py-symbol.o \
-+ py-symtab.o \
-+ py-threadevent.o \
-+ py-type.o \
-+ py-utils.o \
-+ py-value.o
-+
-+SUBDIR_PYTHON_SRCS = \
-+ python/python.c \
-+ python/py-auto-load.c \
-+ python/py-block.c \
-+ python/py-bpevent.c \
-+ python/py-breakpoint.c \
-+ python/py-cmd.c \
-+ python/py-continueevent.c \
-+ python/py-event.c \
-+ python/py-evtregistry.c \
-+ python/py-evts.c \
-+ python/py-exitedevent.c \
-+ python/py-finishbreakpoint.c \
-+ python/py-frame.c \
-+ python/py-function.c \
-+ python/py-inferior.c \
-+ python/py-infthread.c \
-+ python/py-lazy-string.c \
-+ python/py-newobjfileevent.c \
-+ python/py-objfile.c \
-+ python/py-param.c \
-+ python/py-prettyprint.c \
-+ python/py-progspace.c \
-+ python/py-signalevent.c \
-+ python/py-stopevent.c \
-+ python/py-symbol.c \
-+ python/py-symtab.c \
-+ python/py-threadevent.c \
-+ python/py-type.c \
-+ python/py-utils.c \
-+ python/py-value.c
-+SUBDIR_PYTHON_DEPS =
-+SUBDIR_PYTHON_LDFLAGS=
-+SUBDIR_PYTHON_CFLAGS=
-+
-+# Opcodes currently live in one of two places. Either they are in the
-+# opcode library, typically ../opcodes, or they are in a header file
-+# in INCLUDE_DIR.
-+# Where is the "-lopcodes" library, with (some of) the opcode tables and
-+# disassemblers?
-+OPCODES_DIR = ../opcodes
-+OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
-+OPCODES = $(OPCODES_DIR)/libopcodes.a
-+# Where are the other opcode tables which only have header file
-+# versions?
-+OP_INCLUDE = $(INCLUDE_DIR)/opcode
-+# Some source files like to use #include "opcodes/file.h"
-+OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
-+
-+# The simulator is usually nonexistent; targets that include one
-+# should set this to list all the .o or .a files to be linked in.
-+SIM = @SIM@
-+
-+WIN32LIBS = @WIN32LIBS@
-+
-+# Tcl et al cflags and libraries
-+TCL = @TCL_LIBRARY@
-+TCL_CFLAGS = @TCL_INCLUDE@
-+GDBTKLIBS = @GDBTKLIBS@
-+# Extra flags that the GDBTK files need:
-+GDBTK_CFLAGS = @GDBTK_CFLAGS@
-+
-+TK = @TK_LIBRARY@
-+TK_CFLAGS = @TK_INCLUDE@
-+
-+X11_CFLAGS = @TK_XINCLUDES@
-+X11_LDFLAGS =
-+X11_LIBS =
-+
-+WIN32LDAPP = @WIN32LDAPP@
-+
-+LIBGUI = @LIBGUI@
-+GUI_CFLAGS_X = @GUI_CFLAGS_X@
-+IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
-+
-+ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
-+
-+# The version of gdbtk we're building. This should be kept
-+# in sync with GDBTK_VERSION and friends in gdbtk.h.
-+GDBTK_VERSION = 1.0
-+GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
-+
-+# Gdbtk requires an absolute path to the source directory or
-+# the testsuite won't run properly.
-+GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
-+
-+SUBDIR_GDBTK_OBS = \
-+ gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
-+ gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
-+SUBDIR_GDBTK_SRCS = \
-+ gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
-+ gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
-+ gdbtk/generic/gdbtk-interp.c \
-+ gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
-+ gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
-+ gdbtk/generic/gdbtk-main.c
-+SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
-+SUBDIR_GDBTK_LDFLAGS=
-+SUBDIR_GDBTK_CFLAGS= -DGDBTK
-+
-+CONFIG_OBS= @CONFIG_OBS@
-+CONFIG_SRCS= @CONFIG_SRCS@
-+CONFIG_DEPS= @CONFIG_DEPS@
-+CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
-+ENABLE_CFLAGS= @ENABLE_CFLAGS@
-+CONFIG_ALL= @CONFIG_ALL@
-+CONFIG_CLEAN= @CONFIG_CLEAN@
-+CONFIG_INSTALL = @CONFIG_INSTALL@
-+CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
-+
-+# -I. for config files.
-+# -I$(srcdir) for gdb internal headers.
-+# -I$(srcdir)/config for more generic config files.
-+
-+# It is also possible that you will need to add -I/usr/include/sys if
-+# your system doesn't have fcntl.h in /usr/include (which is where it
-+# should be according to Posix).
-+DEFS = @DEFS@
-+GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
-+ -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
-+
-+# MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
-+GLOBAL_CFLAGS = $(MH_CFLAGS)
-+
-+PROFILE_CFLAGS = @PROFILE_CFLAGS@
-+
-+# CFLAGS is specifically reserved for setting from the command line
-+# when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
-+CFLAGS = @CFLAGS@
-+
-+# Set by configure, for e.g. expat. Python installations are such that
-+# C headers are included using their basename (for example, we #include
-+# rather than, say, ). Since the file names
-+# are sometimes a little generic, we think that the risk of collision
-+# with other header files is high. If that happens, we try to mitigate
-+# a bit the consequences by putting the Python includes last in the list.
-+INTERNAL_CPPFLAGS = @CPPFLAGS@ @PYTHON_CPPFLAGS@
-+
-+# Need to pass this to testsuite for "make check". Probably should be
-+# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
-+# so "make check" has the same result no matter where it is run.
-+CXXFLAGS = -g -O
-+
-+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
-+INTERNAL_CFLAGS_BASE = \
-+ $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
-+ $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
-+ $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
-+ $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
-+INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
-+INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
-+
-+# LDFLAGS is specifically reserved for setting from the command line
-+# when running make.
-+LDFLAGS = @LDFLAGS@
-+
-+# Profiling options need to go here to work.
-+# I think it's perfectly reasonable for a user to set -pg in CFLAGS
-+# and have it work; that's why CFLAGS is here.
-+# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
-+INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
-+
-+# If your system is missing alloca(), or, more likely, it's there but
-+# it doesn't work, then refer to libiberty.
-+
-+# Libraries and corresponding dependencies for compiling gdb.
-+# XM_CLIBS, defined in *config files, have host-dependent libs.
-+# LIBIBERTY appears twice on purpose.
-+CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
-+ $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ @PYTHON_LIBS@ \
-+ $(LIBEXPAT) \
-+ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
-+CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
-+ $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
-+
-+ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-+ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
-+
-+DIST=gdb
-+
-+LINT=/usr/5bin/lint
-+LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
-+ $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
-+ $(INTL_CFLAGS)
-+
-+RUNTEST = runtest
-+RUNTESTFLAGS=
-+
-+# XML files to build in to GDB.
-+XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
-+ $(srcdir)/features/library-list.dtd \
-+ $(srcdir)/features/library-list-svr4.dtd $(srcdir)/features/osdata.dtd \
-+ $(srcdir)/features/threads.dtd $(srcdir)/features/traceframe-info.dtd
-+
-+# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
-+# interface to the serial port. Hopefully if get ported to OS/2, VMS,
-+# etc., then there will be (as part of the C library or perhaps as
-+# part of libiberty) a POSIX interface. But at least for now the
-+# host-dependent makefile fragment might need to use something else
-+# besides ser-unix.o
-+SER_HARDWIRE = @SER_HARDWIRE@
-+
-+# The `remote' debugging target is supported for most architectures,
-+# but not all (e.g. 960)
-+REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
-+
-+# This is remote-sim.o if a simulator is to be linked in.
-+SIM_OBS = @SIM_OBS@
-+
-+# Target-dependent object files.
-+TARGET_OBS = @TARGET_OBS@
-+
-+# All target-dependent objects files that require 64-bit CORE_ADDR
-+# (used with --enable-targets=all --enable-64-bit-bfd).
-+ALL_64_TARGET_OBS = \
-+ alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
-+ alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
-+ amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
-+ amd64-linux-tdep.o amd64nbsd-tdep.o \
-+ amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
-+ ia64-hpux-tdep.o ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
-+ mips64obsd-tdep.o \
-+ sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
-+ sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
-+
-+# All other target-dependent objects files (used with --enable-targets=all).
-+ALL_TARGET_OBS = \
-+ armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
-+ armnbsd-tdep.o armobsd-tdep.o \
-+ arm-tdep.o arm-wince-tdep.o \
-+ avr-tdep.o \
-+ bfin-linux-tdep.o bfin-tdep.o \
-+ cris-tdep.o \
-+ dicos-tdep.o \
-+ frv-linux-tdep.o frv-tdep.o \
-+ h8300-tdep.o \
-+ hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
-+ hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
-+ i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
-+ i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
-+ i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
-+ i386-dicos-tdep.o i386-darwin-tdep.o \
-+ iq2000-tdep.o \
-+ linux-tdep.o \
-+ lm32-tdep.o \
-+ m32c-tdep.o \
-+ m32r-linux-tdep.o m32r-tdep.o \
-+ m68hc11-tdep.o \
-+ m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
-+ m88k-tdep.o \
-+ mep-tdep.o \
-+ microblaze-tdep.o microblaze-linux-tdep.o \
-+ mips-irix-tdep.o mips-linux-tdep.o \
-+ mipsnbsd-tdep.o mips-tdep.o \
-+ mn10300-linux-tdep.o mn10300-tdep.o \
-+ moxie-tdep.o \
-+ mt-tdep.o \
-+ nto-tdep.o \
-+ ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
-+ rl78-tdep.o \
-+ rs6000-aix-tdep.o rs6000-tdep.o \
-+ rx-tdep.o \
-+ s390-tdep.o \
-+ score-tdep.o \
-+ sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
-+ sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
-+ sparc-sol2-tdep.o sparc-tdep.o \
-+ spu-tdep.o spu-multiarch.o solib-spu.o \
-+ tic6x-tdep.o tic6x-linux-tdep.o \
-+ tilegx-tdep.o tilegx-linux-tdep.o \
-+ v850-tdep.o \
-+ vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
-+ xstormy16-tdep.o \
-+ xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
-+ glibc-tdep.o \
-+ bsd-uthread.o \
-+ nbsd-tdep.o obsd-tdep.o \
-+ sol2-tdep.o \
-+ solib-frv.o solib-irix.o solib-svr4.o \
-+ solib-som.o solib-pa64.o solib-darwin.o solib-dsbt.o \
-+ dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
-+ remote-m32r-sdi.o remote-mips.o \
-+ xcoffread.o \
-+ symfile-mem.o \
-+ windows-tdep.o \
-+ linux-record.o
-+
-+# Host-dependent makefile fragment comes in here.
-+@host_makefile_frag@
-+# End of host-dependent makefile fragment
-+
-+FLAGS_TO_PASS = \
-+ "prefix=$(prefix)" \
-+ "exec_prefix=$(exec_prefix)" \
-+ "infodir=$(infodir)" \
-+ "datarootdir=$(datarootdir)" \
-+ "docdir=$(docdir)" \
-+ "htmldir=$(htmldir)" \
-+ "pdfdir=$(pdfdir)" \
-+ "libdir=$(libdir)" \
-+ "mandir=$(mandir)" \
-+ "datadir=$(datadir)" \
-+ "includedir=$(includedir)" \
-+ "against=$(against)" \
-+ "DESTDIR=$(DESTDIR)" \
-+ "AR=$(AR)" \
-+ "AR_FLAGS=$(AR_FLAGS)" \
-+ "CC=$(CC)" \
-+ "CFLAGS=$(CFLAGS)" \
-+ "CXX=$(CXX)" \
-+ "CXXFLAGS=$(CXXFLAGS)" \
-+ "DLLTOOL=$(DLLTOOL)" \
-+ "LDFLAGS=$(LDFLAGS)" \
-+ "RANLIB=$(RANLIB)" \
-+ "MAKEINFO=$(MAKEINFO)" \
-+ "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
-+ "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
-+ "MAKEHTML=$(MAKEHTML)" \
-+ "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
-+ "INSTALL=$(INSTALL)" \
-+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-+ "INSTALL_DATA=$(INSTALL_DATA)" \
-+ "RUNTEST=$(RUNTEST)" \
-+ "RUNTESTFLAGS=$(RUNTESTFLAGS)"
-+
-+# Flags that we pass when building the testsuite.
-+
-+# empty for native, $(target_alias)/ for cross
-+target_subdir = @target_subdir@
-+
-+CC_FOR_TARGET = ` \
-+ if [ -f $${rootme}/../gcc/xgcc ] ; then \
-+ if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
-+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
-+ else \
-+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
-+ fi; \
-+ else \
-+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
-+ echo $(CC); \
-+ else \
-+ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
-+ fi; \
-+ fi`
-+
-+CXX = gcc
-+CXX_FOR_TARGET = ` \
-+ if [ -f $${rootme}/../gcc/xgcc ] ; then \
-+ if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
-+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
-+ else \
-+ echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
-+ fi; \
-+ else \
-+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
-+ echo $(CXX); \
-+ else \
-+ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
-+ fi; \
-+ fi`
-+
-+# The use of $$(x_FOR_TARGET) reduces the command line length by not
-+# duplicating the lengthy definition.
-+TARGET_FLAGS_TO_PASS = \
-+ "prefix=$(prefix)" \
-+ "exec_prefix=$(exec_prefix)" \
-+ "against=$(against)" \
-+ 'CC=$$(CC_FOR_TARGET)' \
-+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
-+ "CFLAGS=$(CFLAGS)" \
-+ 'CXX=$$(CXX_FOR_TARGET)' \
-+ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
-+ "CXXFLAGS=$(CXXFLAGS)" \
-+ "INSTALL=$(INSTALL)" \
-+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-+ "INSTALL_DATA=$(INSTALL_DATA)" \
-+ "MAKEINFO=$(MAKEINFO)" \
-+ "MAKEHTML=$(MAKEHTML)" \
-+ "RUNTEST=$(RUNTEST)" \
-+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
-+ "FORCE_PARALLEL=$(FORCE_PARALLEL)"
-+
-+# All source files that go into linking GDB.
-+# Links made at configuration time should not be specified here, since
-+# SFILES is used in building the distribution archive.
-+
-+SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
-+ ada-varobj.c \
-+ addrmap.c auto-load.c \
-+ auxv.c ax-general.c ax-gdb.c \
-+ agent.c \
-+ bcache.c \
-+ bfd-target.c \
-+ block.c blockframe.c breakpoint.c buildsym.c \
-+ c-exp.y c-lang.c c-typeprint.c c-valprint.c \
-+ charset.c cleanups.c cli-out.c coffread.c coff-pe-read.c \
-+ complaints.c completer.c continuations.c corefile.c corelow.c \
-+ cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
-+ d-lang.c d-valprint.c \
-+ cp-name-parser.y \
-+ dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
-+ dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
-+ dwarf2-frame-tailcall.c \
-+ elfread.c environ.c eval.c event-loop.c event-top.c \
-+ exceptions.c expprint.c \
-+ f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
-+ findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
-+ gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
-+ go-exp.y go-lang.c go-typeprint.c go-valprint.c \
-+ inf-loop.c \
-+ infcall.c \
-+ infcmd.c inflow.c infrun.c \
-+ inline-frame.c \
-+ interps.c \
-+ jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
-+ language.c linespec.c \
-+ m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
-+ macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
-+ mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
-+ memrange.c mi/mi-common.c \
-+ objc-exp.y objc-lang.c \
-+ objfiles.c osabi.c observer.c osdata.c \
-+ opencl-lang.c \
-+ p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
-+ proc-service.list progspace.c \
-+ prologue-value.c psymtab.c \
-+ regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
-+ sentinel-frame.c \
-+ serial.c ser-base.c ser-unix.c skip.c \
-+ solib.c solib-target.c source.c \
-+ stabsread.c stack.c probe.c stap-probe.c std-regs.c \
-+ symfile.c symfile-mem.c symmisc.c symtab.c \
-+ target.c target-descriptions.c target-memory.c \
-+ thread.c top.c tracepoint.c \
-+ trad-frame.c \
-+ tramp-frame.c \
-+ typeprint.c \
-+ ui-out.c utils.c ui-file.h ui-file.c \
-+ user-regs.c \
-+ valarith.c valops.c valprint.c value.c varobj.c common/vec.c \
-+ xml-tdesc.c xml-support.c \
-+ inferior.c gdb_usleep.c \
-+ record.c gcore.c \
-+ jit.c \
-+ xml-syscall.c \
-+ annotate.c common/signals.c copying.c dfp.c gdb.c inf-child.c \
-+ regset.c sol-thread.c windows-termcap.c \
-+ common/common-utils.c common/xml-utils.c \
-+ common/ptid.c common/buffer.c gdb-dlfcn.c common/agent.c \
-+ common/format.c
-+
-+LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
-+
-+# Header files that need to have srcdir added. Note that in the cases
-+# where we use a macro like $(gdbcmd_h), things are carefully arranged
-+# so that each .h file is listed exactly once (M-x tags-search works
-+# wrong if TAGS has files twice). Because this is tricky to get
-+# right, it is probably easiest just to list .h files here directly.
-+
-+HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \
-+osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
-+osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
-+osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
-+osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \
-+osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \
-+osf-share/cma_stack_int.h osf-share/cma_init.h \
-+osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \
-+osf-share/cma_sched.h \
-+common/gdb_signals.h common/gdb_thread_db.h common/i386-xstate.h \
-+common/linux-ptrace.h \
-+proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
-+cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
-+exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \
-+i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
-+ia64-tdep.h ada-lang.h ada-varobj.h varobj.h frv-tdep.h nto-tdep.h serial.h \
-+c-lang.h d-lang.h golang.h frame.h event-loop.h block.h cli/cli-setshow.h \
-+cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h cli/cli-utils.h \
-+cli/cli-script.h macrotab.h symtab.h version.h \
-+gnulib/import/string.in.h gnulib/import/str-two-way.h \
-+gnulib/import/stdint.in.h remote.h gdb.h sparc-nat.h \
-+gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
-+amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
-+gdbarch.h bsd-uthread.h gdb_stat.h memory-map.h memrange.h \
-+mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
-+ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
-+f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
-+objfiles.h common/vec.h disasm.h mips-tdep.h ser-base.h \
-+gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
-+inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h inf-ttrace.h \
-+solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
-+m2-lang.h stack.h charset.h cleanups.h addrmap.h command.h solist.h source.h \
-+target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
-+tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
-+tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
-+tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
-+tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
-+expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
-+call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
-+mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
-+complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
-+gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
-+interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
-+amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
-+sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
-+coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
-+m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
-+doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
-+common/gdb_locale.h common/gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
-+language.h nbsd-tdep.h solib-svr4.h \
-+macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
-+inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
-+regformats/regdef.h config/alpha/nm-osf3.h config/i386/nm-i386gnu.h \
-+config/i386/nm-fbsd.h \
-+config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
-+config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
-+annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
-+remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
-+sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
-+gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
-+psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
-+amd64-darwin-tdep.h charset-list.h \
-+config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
-+dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
-+i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h \
-+osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
-+python/python-internal.h python/python.h ravenscar-thread.h record.h \
-+solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \
-+gnulib/import/extra/snippet/arg-nonnull.h gnulib/import/extra/snippet/c++defs.h \
-+gnulib/import/extra/snippet/warn-on-use.h \
-+gnulib/import/stddef.in.h gnulib/import/inttypes.in.h inline-frame.h skip.h \
-+common/common-utils.h common/xml-utils.h common/buffer.h common/ptid.h \
-+common/format.h \
-+common/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h
-+
-+# Header files that already have srcdir in them, or which are in objdir.
-+
-+HFILES_WITH_SRCDIR = ../bfd/bfd.h jit-reader.h
-+
-+
-+# GDB "info" files, which should be included in their entirety
-+INFOFILES = gdb.info*
-+
-+REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
-+
-+# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
-+# default their values the way we do for SER_HARDWIRE; in the future
-+# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
-+# variables analogous to SER_HARDWIRE which get defaulted in this
-+# Makefile.in
-+
-+DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
-+ $(REMOTE_OBS) $(SIM_OBS)
-+
-+SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
-+# Don't include YYFILES (*.c) because we already include *.y in SFILES,
-+# and it's more useful to see it in the .y file.
-+TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
-+ $(CONFIG_SRCS)
-+TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
-+
-+COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
-+ version.o \
-+ annotate.o \
-+ addrmap.o \
-+ auto-load.o auxv.o \
-+ agent.o \
-+ bfd-target.o \
-+ blockframe.o breakpoint.o findvar.o regcache.o cleanups.o \
-+ charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
-+ source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
-+ block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \
-+ infcall.o \
-+ infcmd.o infrun.o \
-+ expprint.o environ.o stack.o thread.o \
-+ exceptions.o \
-+ filesystem.o \
-+ inf-child.o \
-+ interps.o \
-+ main.o \
-+ macrotab.o macrocmd.o macroexp.o macroscope.o \
-+ mi-common.o \
-+ event-loop.o event-top.o inf-loop.o completer.o \
-+ gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
-+ memattr.o mem-break.o target.o parse.o language.o buildsym.o \
-+ findcmd.o \
-+ std-regs.o \
-+ signals.o \
-+ exec.o reverse.o \
-+ bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
-+ dbxread.o coffread.o coff-pe-read.o \
-+ dwarf2read.o mipsread.o stabsread.o corefile.o \
-+ dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
-+ ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
-+ ada-tasks.o ada-varobj.o \
-+ ui-out.o cli-out.o \
-+ varobj.o vec.o \
-+ go-lang.o go-valprint.o go-typeprint.o \
-+ jv-lang.o jv-valprint.o jv-typeprint.o \
-+ m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
-+ sentinel-frame.o \
-+ complaints.o typeprint.o \
-+ ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
-+ ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
-+ m2-valprint.o \
-+ serial.o mdebugread.o top.o utils.o \
-+ ui-file.o \
-+ user-regs.o \
-+ frame.o frame-unwind.o doublest.o \
-+ frame-base.o \
-+ inline-frame.o \
-+ gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
-+ cp-namespace.o \
-+ reggroups.o regset.o \
-+ trad-frame.o \
-+ tramp-frame.o \
-+ solib.o solib-target.o \
-+ prologue-value.o memory-map.o memrange.o \
-+ xml-support.o xml-syscall.o xml-utils.o \
-+ target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
-+ inferior.o osdata.o gdb_usleep.o record.o gcore.o \
-+ jit.o progspace.o skip.o probe.o \
-+ common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
-+ format.o
-+
-+TSOBS = inflow.o
-+
-+SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
-+CLEANDIRS = $(SUBDIRS)
-+
-+# List of subdirectories in the build tree that must exist.
-+# This is used to force build failures in existing trees when
-+# a new directory is added.
-+# The format here is for the `case' shell command.
-+REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
-+
-+# For now, shortcut the "configure GDB for fewer languages" stuff.
-+YYFILES = c-exp.c \
-+ cp-name-parser.c \
-+ objc-exp.c \
-+ ada-lex.c \
-+ ada-exp.c \
-+ jv-exp.c \
-+ f-exp.c go-exp.c m2-exp.c p-exp.c
-+YYOBJ = c-exp.o \
-+ cp-name-parser.o \
-+ objc-exp.o \
-+ ada-exp.o \
-+ jv-exp.o \
-+ f-exp.o go-exp.o m2-exp.o p-exp.o
-+
-+# Things which need to be built when making a distribution.
-+
-+DISTSTUFF = $(YYFILES)
-+
-+
-+# All generated files which can be included by another file.
-+generated_files = config.h observer.h observer.inc ada-lex.c jit-reader.h \
-+ $(GNULIB_H) $(NAT_GENERATED_FILES)
-+
-+.c.o:
-+ $(COMPILE) $<
-+ $(POSTCOMPILE)
-+
-+all: gdb$(EXEEXT) $(CONFIG_ALL)
-+ @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
-+
-+installcheck:
-+
-+# The check target can not use subdir_do, because subdir_do does not
-+# use TARGET_FLAGS_TO_PASS.
-+check: force
-+ @if [ -f testsuite/Makefile ]; then \
-+ rootme=`pwd`; export rootme; \
-+ rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
-+ cd testsuite; \
-+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
-+ else true; fi
-+
-+# The idea is to parallelize testing of multilibs, for example:
-+# make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
-+# will run 3 concurrent sessions of check, eventually testing all 10
-+# combinations. GNU make is required for the % pattern to work, as is
-+# a shell that expands alternations within braces. If GNU make is not
-+# used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
-+# prevent serialized checking due to the passed RUNTESTFLAGS.
-+# FIXME: use config.status --config not --version, when available.
-+check//%: force
-+ @if [ -f testsuite/config.status ]; then \
-+ rootme=`pwd`; export rootme; \
-+ rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
-+ target=`echo "$@" | sed 's,//.*,,'`; \
-+ variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
-+ vardots=`echo "$$variant" | sed 's,/,.,g'`; \
-+ testdir=testsuite.$$vardots; \
-+ if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
-+ configargs=`cd testsuite && ./config.status --version | \
-+ sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
-+ (cd $$testdir && \
-+ eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
-+ "\"--srcdir=\$$rootsrc/testsuite\"" \
-+ ); \
-+ else :; fi && cd $$testdir && \
-+ $(MAKE) $(TARGET_FLAGS_TO_PASS) \
-+ RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
-+ FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
-+ "$$target"; \
-+ else true; fi
-+
-+info install-info clean-info dvi pdf install-pdf html install-html: force
-+ @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
-+
-+gdb.z:gdb.1
-+ nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
-+ pack gdb.t ; rm -f gdb.t
-+ mv gdb.t.z gdb.z
-+
-+# Traditionally "install" depends on "all". But it may be useful
-+# not to; for example, if the user has made some trivial change to a
-+# source file and doesn't care about rebuilding or just wants to save the
-+# time it takes for make to check that all is up to date.
-+# install-only is intended to address that need.
-+install: all
-+ @$(MAKE) $(FLAGS_TO_PASS) install-only
-+
-+install-only: $(CONFIG_INSTALL)
-+ transformed_name=`t='$(program_transform_name)'; \
-+ echo gdb | sed -e "$$t"` ; \
-+ if test "x$$transformed_name" = x; then \
-+ transformed_name=gdb ; \
-+ else \
-+ true ; \
-+ fi ; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
-+ $(INSTALL_PROGRAM) gdb$(EXEEXT) \
-+ $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs \
-+ $(DESTDIR)$(man1dir) ; \
-+ $(INSTALL_DATA) $(srcdir)/gdb.1 \
-+ $(DESTDIR)$(man1dir)/$$transformed_name.1 ; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
-+ $(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
-+ @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
-+
-+install-python:
-+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
-+
-+uninstall: force $(CONFIG_UNINSTALL)
-+ transformed_name=`t='$(program_transform_name)'; \
-+ echo gdb | sed -e $$t` ; \
-+ if test "x$$transformed_name" = x; then \
-+ transformed_name=gdb ; \
-+ else \
-+ true ; \
-+ fi ; \
-+ rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
-+ $(DESTDIR)$(man1dir)/$$transformed_name.1
-+ @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
-+
-+# The C++ name parser can be built standalone for testing.
-+test-cp-name-parser.o: cp-name-parser.c
-+ $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
-+ $(POSTCOMPILE)
-+
-+test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
-+ $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
-+ test-cp-name-parser.o $(LIBIBERTY)
-+
-+# We do this by grepping through sources. If that turns out to be too slow,
-+# maybe we could just require every .o file to have an initialization routine
-+# of a given name (top.o -> _initialize_top, etc.).
-+#
-+# Formatting conventions: The name of the _initialize_* routines must start
-+# in column zero, and must not be inside #if.
-+#
-+# Note that the set of files with init functions might change, or the names
-+# of the functions might change, so this files needs to depend on all the
-+# object files that will be linked into gdb.
-+
-+# FIXME: There is a problem with this approach - init.c may force
-+# unnecessary files to be linked in.
-+
-+# FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
-+# the first call is to _initialize_gdbtypes (implemented by explicitly
-+# putting that function's name first in the init.l-tmp file). This is
-+# a hack to ensure that all the architecture dependant global
-+# builtin_type_* variables are initialized before anything else
-+# (per-architecture code is called in the same order that it is
-+# registered). The ``correct fix'' is to have all the builtin types
-+# made part of the architecture and initialize them on-demand (using
-+# gdbarch_data) just like everything else. The catch is that other
-+# modules still take the address of these builtin types forcing them
-+# to be variables, sigh!
-+
-+# NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
-+# anchored on the first column and excludes the ``/'' character so
-+# that it doesn't add the $(srcdir) prefix to any file that already
-+# has an absolute path. It turns out that $(DEC)'s True64 make
-+# automatically adds the $(srcdir) prefixes when it encounters files
-+# in sub-directories such as cli/ and mi/.
-+
-+# NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
-+# duplicates. Files in the gdb/ directory can end up appearing in
-+# COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
-+
-+INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
-+init.c: $(INIT_FILES)
-+ @echo Making init.c
-+ @rm -f init.c-tmp init.l-tmp
-+ @touch init.c-tmp
-+ @echo gdbtypes > init.l-tmp
-+ @-LANG=C ; export LANG ; \
-+ LC_ALL=C ; export LC_ALL ; \
-+ echo $(INIT_FILES) | \
-+ tr ' ' '\012' | \
-+ sed \
-+ -e '/^gdbtypes.[co]$$/d' \
-+ -e '/^init.[co]$$/d' \
-+ -e '/xdr_ld.[co]$$/d' \
-+ -e '/xdr_ptrace.[co]$$/d' \
-+ -e '/xdr_rdb.[co]$$/d' \
-+ -e '/udr.[co]$$/d' \
-+ -e '/udip2soc.[co]$$/d' \
-+ -e '/udi2go32.[co]$$/d' \
-+ -e '/version.[co]$$/d' \
-+ -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
-+ -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
-+ -e 's/\.[co]$$/.c/' \
-+ -e 's,signals\.c,common/signals\.c,' \
-+ -e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
-+ while read f; do \
-+ sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
-+ done | \
-+ while read f; do \
-+ case " $$fs " in \
-+ *" $$f "* ) ;; \
-+ * ) echo $$f ; fs="$$fs $$f";; \
-+ esac; \
-+ done >> init.l-tmp
-+ @echo '/* Do not modify this file. */' >>init.c-tmp
-+ @echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
-+ @echo '#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
-+ @echo '#include "call-cmds.h" /* For initialize_all_files. */' >>init.c-tmp
-+ @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' >init.c-tmp
-+ @echo 'void' >>init.c-tmp
-+ @echo 'initialize_all_files (void)' >>init.c-tmp
-+ @echo '{' >>init.c-tmp
-+ @sed -e 's/\(.*\)/ _initialize_\1 ();/' >init.c-tmp
-+ @echo '}' >>init.c-tmp
-+ @rm init.l-tmp
-+ @mv init.c-tmp init.c
-+
-+.PRECIOUS: init.c
-+
-+# Create a library of the gdb object files and build GDB by linking
-+# against that.
-+#
-+# init.o is very important. It pulls in the rest of GDB.
-+LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
-+libgdb.a: $(LIBGDB_OBS)
-+ -rm -f libgdb.a
-+ $(AR) q libgdb.a $(LIBGDB_OBS)
-+ $(RANLIB) libgdb.a
-+
-+# Removing the old gdb first works better if it is running, at least on SunOS.
-+gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
-+ rm -f gdb$(EXEEXT)
-+ $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-+ -o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
-+ $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
-+
-+# Convenience rule to handle recursion.
-+$(LIBGNU) $(GNULIB_H): all-lib
-+all-lib: $(GNULIB_BUILDDIR)/Makefile
-+ @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
-+.PHONY: all-lib
-+
-+# Convenience rule to handle recursion.
-+.PHONY: all-data-directory
-+all-data-directory: data-directory/Makefile
-+ @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do
-+
-+# This is useful when debugging GDB, because some Unix's don't let you run GDB
-+# on itself without copying the executable. So "make gdb1" will make
-+# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
-+# Removing gdb1 before the copy is the right thing if gdb1 is open
-+# in another process.
-+gdb1$(EXEEXT): gdb$(EXEEXT)
-+ rm -f gdb1$(EXEEXT)
-+ cp gdb$(EXEEXT) gdb1$(EXEEXT)
-+
-+# Put the proper machine-specific files first, so M-. on a machine
-+# specific routine gets the one for the correct machine. (FIXME: those
-+# files go in twice; we should be removing them from the main list).
-+
-+# TAGS depends on all the files that go into it so you can rebuild TAGS
-+# with `make TAGS' and not have to say `rm TAGS' first.
-+
-+GDB_NM_FILE = @GDB_NM_FILE@
-+TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
-+ @echo Making TAGS
-+ @etags $(srcdir)/$(GDB_NM_FILE) \
-+ `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
-+ echo $(srcdir)/$$i ; \
-+ done ; for i in $(TAGFILES_WITH_SRCDIR); do \
-+ echo $$i ; \
-+ done) | sed -e 's/\.o$$/\.c/'` \
-+ `find $(srcdir)/config -name '*.h' -print`
-+
-+tags: TAGS
-+
-+clean mostlyclean: $(CONFIG_CLEAN)
-+ @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
-+ rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
-+ rm -f init.c version.c observer.h observer.inc
-+ rm -f gdb$(EXEEXT) core make.log
-+ rm -f gdb[0-9]$(EXEEXT)
-+ rm -f test-cp-name-parser$(EXEEXT)
-+ rm -f xml-builtin.c stamp-xml
-+ rm -f $(DEPDIR)/*
-+
-+# This used to depend on c-exp.c m2-exp.c TAGS
-+# I believe this is wrong; the makefile standards for distclean just
-+# describe removing files; the only sort of "re-create a distribution"
-+# functionality described is if the distributed files are unmodified.
-+# NB: While GDBSERVER might be configured on native systems, it isn't
-+# always included in SUBDIRS. Remove the gdbserver files explicitly.
-+distclean: clean
-+ @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
-+ rm -rf $(GNULIB_BUILDDIR)
-+ rm -f gdbserver/config.status gdbserver/config.log
-+ rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
-+ rm -f gdbserver/Makefile gdbserver/config.cache
-+ rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
-+ rm -f y.output yacc.acts yacc.tmp y.tab.h
-+ rm -f config.log config.cache
-+ rm -f Makefile
-+ rm -rf $(DEPDIR)
-+
-+maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
-+realclean: maintainer-clean
-+
-+local-maintainer-clean:
-+ @echo "This command is intended for maintainers to use;"
-+ @echo "it deletes files that may require special tools to rebuild."
-+ rm -f c-exp.c \
-+ cp-name-parser.c \
-+ ada-lex.c ada-exp.c \
-+ objc-exp.c \
-+ jv-exp.tab \
-+ f-exp.c go-exp.c m2-exp.c p-exp.c
-+ rm -f TAGS $(INFOFILES)
-+ rm -f $(YYFILES)
-+ rm -f nm.h config.status
-+
-+do-maintainer-clean:
-+ @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
-+ subdir_do
-+
-+diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
-+ cd doc; $(MAKE) $(MFLAGS) diststuff
-+
-+subdir_do: force
-+ @for i in $(DODIRS); do \
-+ case $$i in \
-+ $(REQUIRED_SUBDIRS)) \
-+ if [ ! -f ./$$i/Makefile ] ; then \
-+ echo "Missing $$i/Makefile" >&2 ; \
-+ exit 1 ; \
-+ fi ;; \
-+ esac ; \
-+ if [ -f ./$$i/Makefile ] ; then \
-+ if (cd ./$$i; \
-+ $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
-+ else exit 1 ; fi ; \
-+ else true ; fi ; \
-+ done
-+
-+Makefile: Makefile.in config.status @frags@
-+ # Regenerate the Makefile and the tm.h / nm.h links.
-+ CONFIG_FILES="Makefile" \
-+ CONFIG_COMMANDS= \
-+ CONFIG_HEADERS= \
-+ $(SHELL) config.status
-+
-+$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status @frags@
-+ @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
-+ CONFIG_COMMANDS="depfiles" \
-+ CONFIG_HEADERS= \
-+ CONFIG_LINKS= \
-+ $(SHELL) config.status
-+
-+data-directory/Makefile: data-directory/Makefile.in config.status @frags@
-+ CONFIG_FILES="data-directory/Makefile" \
-+ CONFIG_COMMANDS="depfiles" \
-+ CONFIG_HEADERS= \
-+ CONFIG_LINKS= \
-+ $(SHELL) config.status
-+
-+jit-reader.h: $(srcdir)/jit-reader.in
-+ $(SHELL) config.status $@
-+
-+config.h: stamp-h ; @true
-+stamp-h: $(srcdir)/config.in config.status
-+ CONFIG_HEADERS=config.h:config.in \
-+ CONFIG_COMMANDS="default depdir" \
-+ CONFIG_FILES= \
-+ CONFIG_LINKS= \
-+ $(SHELL) config.status
-+
-+config.status: $(srcdir)/configure configure.tgt configure.host
-+ $(SHELL) config.status --recheck
-+
-+ACLOCAL = aclocal
-+ACLOCAL_AMFLAGS = -I ../config
-+aclocal_m4_deps = \
-+ configure.ac \
-+ acx_configure_dir.m4 \
-+ ../config/extensions.m4 \
-+ ../config/lead-dot.m4 \
-+ ../config/proginstall.m4 \
-+ ../bfd/bfd.m4 \
-+ ../config/acinclude.m4 \
-+ ../config/override.m4 \
-+ ../config/gettext-sister.m4 \
-+ ../config/lib-ld.m4 \
-+ ../config/lib-prefix.m4 \
-+ ../config/lib-link.m4 \
-+ ../config/acx.m4 \
-+ ../config/tcl.m4 \
-+ ../config/depstand.m4 \
-+ ../config/lcmessage.m4 \
-+ ../config/codeset.m4
-+
-+$(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
-+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-+
-+AUTOCONF = autoconf
-+configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
-+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
-+ cd $(srcdir) && $(AUTOCONF)
-+
-+AUTOHEADER = autoheader
-+$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
-+ cd $(srcdir) && $(AUTOHEADER)
-+ rm -f stamp-h
-+ touch $@
-+
-+# automatic rebuilding in automake-generated Makefiles requires
-+# this rule in the toplevel Makefile, which, with GNU make, causes
-+# the desired updates through the implicit regeneration of the Makefile
-+# and all of its prerequisites.
-+am--refresh:
-+ @:
-+
-+force:
-+
-+# Documentation!
-+# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
-+doc/refcard.dvi:
-+ cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
-+
-+# GDB QUICK REFERENCE (PostScript output, common PS fonts)
-+doc/refcard.ps:
-+ cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
-+
-+# GDB MANUAL: TeX dvi file
-+doc/gdb.dvi:
-+ cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
-+
-+# GDB MANUAL: info file
-+doc/gdb.info:
-+ cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
-+
-+# Make copying.c from COPYING
-+$(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
-+ awk -f $(srcdir)/copying.awk \
-+ < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
-+ mv $(srcdir)/copying.tmp $(srcdir)/copying.c
-+
-+version.c: Makefile version.in
-+ rm -f version.c-tmp version.c
-+ echo '#include "version.h"' >> version.c-tmp
-+ echo 'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
-+ echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
-+ echo 'const char target_name[] = "$(target_alias)";' >> version.c-tmp
-+ mv version.c-tmp version.c
-+
-+observer.h: observer.sh doc/observer.texi
-+ ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
-+
-+observer.inc: observer.sh doc/observer.texi
-+ ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
-+
-+lint: $(LINTFILES)
-+ $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
-+ `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
-+
-+gdb.cxref: $(SFILES)
-+ cxref -I. $(SFILES) >gdb.cxref
-+
-+force_update:
-+
-+# GNU Make has an annoying habit of putting *all* the Makefile variables
-+# into the environment, unless you include this target as a circumvention.
-+# Rumor is that this will be fixed (and this target can be removed)
-+# in GNU Make 4.0.
-+.NOEXPORT:
-+
-+# GNU Make 3.63 has a different problem: it keeps tacking command line
-+# overrides onto the definition of $(MAKE). This variable setting
-+# will remove them.
-+MAKEOVERRIDES=
-+
-+ALLDEPFILES = \
-+ aix-thread.c \
-+ alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
-+ alpha-tdep.c alpha-mdebug-tdep.c \
-+ alpha-linux-tdep.c alpha-osf1-tdep.c \
-+ alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
-+ amd64-nat.c amd64-tdep.c \
-+ amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
-+ amd64nbsd-nat.c amd64nbsd-tdep.c \
-+ amd64obsd-nat.c amd64obsd-tdep.c \
-+ amd64-darwin-tdep.c \
-+ amd64-dicos-tdep.c \
-+ amd64-linux-nat.c amd64-linux-tdep.c \
-+ amd64-sol2-tdep.c \
-+ arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
-+ armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
-+ avr-tdep.c \
-+ bfin-linux-tdep.c bfin-tdep.c \
-+ bsd-uthread.c bsd-kvm.c \
-+ core-regset.c \
-+ dcache.c dicos-tdep.c darwin-nat.c \
-+ exec.c \
-+ fbsd-nat.c \
-+ fork-child.c \
-+ glibc-tdep.c \
-+ go32-nat.c h8300-tdep.c \
-+ hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
-+ hppa-linux-tdep.c hppa-linux-nat.c \
-+ hppabsd-nat.c hppabsd-tdep.c \
-+ hppaobsd-tdep.c \
-+ hppanbsd-nat.c hppanbsd-tdep.c \
-+ i386-tdep.c i386-linux-nat.c \
-+ i386v4-nat.c i386-cygwin-tdep.c \
-+ i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
-+ i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
-+ i387-tdep.c \
-+ i386-darwin-tdep.c i386-darwin-nat.c \
-+ i386-dicos-tdep.c \
-+ i386-linux-tdep.c i386-nat.c \
-+ i386-sol2-nat.c i386-sol2-tdep.c \
-+ i386gnu-nat.c i386gnu-tdep.c \
-+ ia64-hpux-nat.c ia64-hpux-tdep.c \
-+ ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
-+ inf-ptrace.c inf-ttrace.c \
-+ irix5-nat.c \
-+ ia64-libunwind-tdep.c \
-+ linux-fork.c \
-+ linux-tdep.c \
-+ linux-record.c \
-+ lm32-tdep.c \
-+ m68hc11-tdep.c \
-+ m32r-tdep.c \
-+ m32r-linux-nat.c m32r-linux-tdep.c \
-+ m68k-tdep.c \
-+ m68kbsd-nat.c m68kbsd-tdep.c \
-+ m68klinux-nat.c m68klinux-tdep.c \
-+ m88k-tdep.c m88kbsd-nat.c \
-+ microblaze-tdep.c microblaze-linux-tdep.c \
-+ mingw-hdep.c \
-+ mips-linux-nat.c mips-linux-tdep.c \
-+ mips-irix-tdep.c \
-+ mips-tdep.c \
-+ mipsnbsd-nat.c mipsnbsd-tdep.c \
-+ mips64obsd-nat.c mips64obsd-tdep.c \
-+ nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
-+ solib-osf.c \
-+ somread.c solib-som.c \
-+ posix-hdep.c \
-+ ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
-+ ppcnbsd-nat.c ppcnbsd-tdep.c \
-+ ppcobsd-nat.c ppcobsd-tdep.c \
-+ procfs.c \
-+ remote-m32r-sdi.c remote-mips.c \
-+ remote-sim.c \
-+ dcache.c \
-+ rl78-tdep.c \
-+ rs6000-nat.c rs6000-tdep.c \
-+ rx-tdep.c \
-+ s390-tdep.c s390-nat.c \
-+ score-tdep.c \
-+ ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
-+ sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
-+ sol2-tdep.c \
-+ solib-irix.c solib-svr4.c solib-sunos.c \
-+ sparc-linux-nat.c sparc-linux-tdep.c \
-+ sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
-+ sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
-+ sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
-+ sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
-+ sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
-+ spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
-+ tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
-+ v850-tdep.c \
-+ vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
-+ windows-nat.c windows-tdep.c \
-+ xcoffread.c xcoffsolib.c \
-+ xstormy16-tdep.c \
-+ xtensa-tdep.c xtensa-config.c \
-+ xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
-+
-+# Some files need explicit build rules (due to -Werror problems) or due
-+# to sub-directory fun 'n' games.
-+
-+# FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
-+# errors. It turns out that that is the least of monitor.c's
-+# problems. The function print_vsprintf appears to be using
-+# va_arg(long) to extract CORE_ADDR parameters - something that
-+# definitly will not work. "monitor.c" needs to be rewritten so that
-+# it doesn't use format strings and instead uses callbacks.
-+monitor.o: $(srcdir)/monitor.c
-+ $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
-+ $(COMPILE.post) $(srcdir)/monitor.c
-+ $(POSTCOMPILE)
-+
-+# Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
-+# checks format strings.
-+printcmd.o: $(srcdir)/printcmd.c
-+ $(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
-+ $(COMPILE.post) $(srcdir)/printcmd.c
-+ $(POSTCOMPILE)
-+
-+# Message files. Based on code in gcc/Makefile.in.
-+
-+# Rules for generating translated message descriptions. Disabled by
-+# autoconf if the tools are not available.
-+
-+.SUFFIXES: .po .gmo .pox .pot
-+.PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
-+
-+all-po: $(CATALOGS)
-+
-+# This notation should be acceptable to all Make implementations used
-+# by people who are interested in updating .po files.
-+update-po: $(CATALOGS:.gmo=.pox)
-+
-+# N.B. We do not attempt to copy these into $(srcdir). The snapshot
-+# script does that.
-+.po.gmo:
-+ -test -d po || mkdir po
-+ $(GMSGFMT) --statistics -o $@ $<
-+
-+# The new .po has to be gone over by hand, so we deposit it into
-+# build/po with a different extension. If build/po/$(PACKAGE).pot
-+# exists, use it (it was just created), else use the one in srcdir.
-+.po.pox:
-+ -test -d po || mkdir po
-+ $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
-+ then echo po/$(PACKAGE).pot; \
-+ else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
-+
-+# This rule has to look for .gmo modules in both srcdir and the cwd,
-+# and has to check that we actually have a catalog for each language,
-+# in case they weren't built or included with the distribution.
-+install-po:
-+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
-+ cats="$(CATALOGS)"; for cat in $$cats; do \
-+ lang=`basename $$cat | sed 's/\.gmo$$//'`; \
-+ if [ -f $$cat ]; then :; \
-+ elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
-+ else continue; \
-+ fi; \
-+ dir=$(localedir)/$$lang/LC_MESSAGES; \
-+ echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
-+ echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
-+ $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
-+ done
-+uninstall-po:
-+ cats="$(CATALOGS)"; for cat in $$cats; do \
-+ lang=`basename $$cat | sed 's/\.gmo$$//'`; \
-+ if [ -f $$cat ]; then :; \
-+ elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
-+ else continue; \
-+ fi; \
-+ dir=$(localedir)/$$lang/LC_MESSAGES; \
-+ rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
-+ done
-+# Delete po/*.gmo only if we are not building in the source directory.
-+clean-po:
-+ -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
-+
-+# Rule for regenerating the message template (gdb.pot). Instead of
-+# forcing everyone to edit POTFILES.in, which proved impractical, this
-+# rule has no dependencies and always regenerates gdb.pot. This is
-+# relatively harmless since the .po files do not directly depend on
-+# it. The .pot file is left in the build directory. Since GDB's
-+# Makefile lacks a cannonical list of sources (missing xm, tm and nm
-+# files) force this rule.
-+$(PACKAGE).pot: po/$(PACKAGE).pot
-+po/$(PACKAGE).pot: force
-+ -test -d po || mkdir po
-+ sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
-+
-+
-+#
-+# YACC/LEX dependencies
-+#
-+# LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
-+# exist in srcdir, then compiled in objdir to LANG-exp.o. If we
-+# said LANG-exp.c rather than ./c-exp.c some makes would
-+# sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
-+# decls for malloc/realloc/free which conflict with everything else.
-+# Strictly speaking c-exp.c should therefore depend on
-+# Makefile.in, but that was a pretty big annoyance.
-+
-+.SUFFIXES: .y .l
-+.y.c:
-+ rm -f $@ $@.tmp
-+ $(SHELL) $(YLWRAP) $< y.tab.c $@ -- $(YACC) $(YFLAGS) && mv $@ $@.tmp \
-+ || (rm -f $@; false)
-+ sed -e '/extern.*malloc/d' \
-+ -e '/extern.*realloc/d' \
-+ -e '/extern.*free/d' \
-+ -e '/include.*malloc.h/d' \
-+ -e 's/\([^x]\)malloc/\1xmalloc/g' \
-+ -e 's/\([^x]\)realloc/\1xrealloc/g' \
-+ -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-+ -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-+ -e '/^#line.*y.tab.c/d' \
-+ -e "s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \
-+ < $@.tmp > $@
-+ rm -f $@.tmp
-+.l.c:
-+ if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
-+ $(FLEX) -o$@ $< && \
-+ rm -f $@.new && \
-+ sed -e '/extern.*malloc/d' \
-+ -e '/extern.*realloc/d' \
-+ -e '/extern.*free/d' \
-+ -e '/include.*malloc.h/d' \
-+ -e 's/\([^x]\)malloc/\1xmalloc/g' \
-+ -e 's/\([^x]\)realloc/\1xrealloc/g' \
-+ -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-+ -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-+ -e 's/yy_flex_xrealloc/yyxrealloc/g' \
-+ < $@ > $@.new && \
-+ rm -f $@ && \
-+ mv $@.new $@; \
-+ elif [ -f $@ ]; then \
-+ echo "Warning: $*.c older than $*.l and flex not available."; \
-+ else \
-+ echo "$@ missing and flex not available."; \
-+ false; \
-+ fi
-+
-+.PRECIOUS: ada-lex.c
-+
-+# XML rules
-+
-+xml-builtin.c: stamp-xml; @true
-+stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
-+ rm -f xml-builtin.tmp
-+ AWK="$(AWK)" \
-+ $(SHELL) $(srcdir)/features/feature_to_c.sh \
-+ xml-builtin.tmp $(XMLFILES)
-+ $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
-+ echo stamp > stamp-xml
-+
-+.PRECIOUS: xml-builtin.c
-+
-+#
-+# gdb/cli/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+cli-cmds.o: $(srcdir)/cli/cli-cmds.c
-+ $(COMPILE) $(srcdir)/cli/cli-cmds.c
-+ $(POSTCOMPILE)
-+
-+cli-decode.o: $(srcdir)/cli/cli-decode.c
-+ $(COMPILE) $(srcdir)/cli/cli-decode.c
-+ $(POSTCOMPILE)
-+
-+cli-dump.o: $(srcdir)/cli/cli-dump.c
-+ $(COMPILE) $(srcdir)/cli/cli-dump.c
-+ $(POSTCOMPILE)
-+
-+cli-interp.o: $(srcdir)/cli/cli-interp.c
-+ $(COMPILE) $(srcdir)/cli/cli-interp.c
-+ $(POSTCOMPILE)
-+
-+cli-logging.o: $(srcdir)/cli/cli-logging.c
-+ $(COMPILE) $(srcdir)/cli/cli-logging.c
-+ $(POSTCOMPILE)
-+
-+cli-script.o: $(srcdir)/cli/cli-script.c
-+ $(COMPILE) $(srcdir)/cli/cli-script.c
-+ $(POSTCOMPILE)
-+
-+cli-setshow.o: $(srcdir)/cli/cli-setshow.c
-+ $(COMPILE) $(srcdir)/cli/cli-setshow.c
-+ $(POSTCOMPILE)
-+
-+cli-utils.o: $(srcdir)/cli/cli-utils.c
-+ $(COMPILE) $(srcdir)/cli/cli-utils.c
-+ $(POSTCOMPILE)
-+
-+
-+#
-+# GDBTK sub-directory
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the mi directory.
-+
-+all-gdbtk: insight$(EXEEXT)
-+
-+install-gdbtk:
-+ transformed_name=`t='$(program_transform_name)'; \
-+ echo insight | sed -e $$t` ; \
-+ if test "x$$transformed_name" = x; then \
-+ transformed_name=insight ; \
-+ else \
-+ true ; \
-+ fi ; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
-+ $(INSTALL_PROGRAM) insight$(EXEEXT) \
-+ $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs \
-+ $(DESTDIR)$(GDBTK_LIBRARY) ; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs \
-+ $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
-+ $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
-+ $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs \
-+ $(DESTDIR)$(GDBTK_LIBRARY)/images \
-+ $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
-+ $(SHELL) $(srcdir)/../mkinstalldirs \
-+ $(DESTDIR)$(GDBTK_LIBRARY)/help \
-+ $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
-+ $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
-+ cd $(srcdir)/gdbtk/library ; \
-+ for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
-+ do \
-+ $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
-+ done ;
-+
-+uninstall-gdbtk:
-+ transformed_name=`t='$(program_transform_name)'; \
-+ echo insight | sed -e $$t` ; \
-+ if test "x$$transformed_name" = x; then \
-+ transformed_name=insight ; \
-+ else \
-+ true ; \
-+ fi ; \
-+ rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
-+ rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
-+
-+clean-gdbtk:
-+ rm -f insight$(EXEEXT)
-+
-+# Removing the old gdb first works better if it is running, at least on SunOS.
-+insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
-+ $(CDEPS) $(TDEPLIBS)
-+ rm -f insight$(EXEEXT)
-+ $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-+ -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
-+ $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
-+
-+gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
-+ $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
-+
-+all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
-+ $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
-+ $(GDBTK_CFLAGS) \
-+ -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
-+ -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
-+
-+gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
-+ $(POSTCOMPILE)
-+
-+gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
-+ $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
-+ $(POSTCOMPILE)
-+
-+
-+#
-+# gdb/mi/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
-+ $(POSTCOMPILE)
-+
-+mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
-+ $(POSTCOMPILE)
-+
-+mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
-+ $(POSTCOMPILE)
-+
-+mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
-+ $(POSTCOMPILE)
-+
-+mi-cmd-info.o: $(srcdir)/mi/mi-cmd-info.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmd-info.c
-+ $(POSTCOMPILE)
-+
-+mi-cmds.o: $(srcdir)/mi/mi-cmds.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmds.c
-+ $(POSTCOMPILE)
-+
-+mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
-+ $(POSTCOMPILE)
-+
-+mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
-+ $(POSTCOMPILE)
-+
-+mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
-+ $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
-+ $(POSTCOMPILE)
-+
-+mi-console.o: $(srcdir)/mi/mi-console.c
-+ $(COMPILE) $(srcdir)/mi/mi-console.c
-+ $(POSTCOMPILE)
-+
-+mi-getopt.o: $(srcdir)/mi/mi-getopt.c
-+ $(COMPILE) $(srcdir)/mi/mi-getopt.c
-+ $(POSTCOMPILE)
-+
-+mi-interp.o: $(srcdir)/mi/mi-interp.c
-+ $(COMPILE) $(srcdir)/mi/mi-interp.c
-+ $(POSTCOMPILE)
-+
-+mi-main.o: $(srcdir)/mi/mi-main.c
-+ $(COMPILE) $(srcdir)/mi/mi-main.c
-+ $(POSTCOMPILE)
-+
-+mi-out.o: $(srcdir)/mi/mi-out.c
-+ $(COMPILE) $(srcdir)/mi/mi-out.c
-+ $(POSTCOMPILE)
-+
-+mi-parse.o: $(srcdir)/mi/mi-parse.c
-+ $(COMPILE) $(srcdir)/mi/mi-parse.c
-+ $(POSTCOMPILE)
-+
-+mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
-+ $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
-+ $(POSTCOMPILE)
-+
-+mi-common.o: $(srcdir)/mi/mi-common.c
-+ $(COMPILE) $(srcdir)/mi/mi-common.c
-+ $(POSTCOMPILE)
-+
-+# gdb/common/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+signals.o: $(srcdir)/common/signals.c
-+ $(COMPILE) $(srcdir)/common/signals.c
-+ $(POSTCOMPILE)
-+
-+common-utils.o: ${srcdir}/common/common-utils.c
-+ $(COMPILE) $(srcdir)/common/common-utils.c
-+ $(POSTCOMPILE)
-+
-+xml-utils.o: ${srcdir}/common/xml-utils.c
-+ $(COMPILE) $(srcdir)/common/xml-utils.c
-+ $(POSTCOMPILE)
-+
-+ptid.o: ${srcdir}/common/ptid.c
-+ $(COMPILE) $(srcdir)/common/ptid.c
-+ $(POSTCOMPILE)
-+
-+buffer.o: ${srcdir}/common/buffer.c
-+ $(COMPILE) $(srcdir)/common/buffer.c
-+ $(POSTCOMPILE)
-+
-+format.o: ${srcdir}/common/format.c
-+ $(COMPILE) $(srcdir)/common/format.c
-+ $(POSTCOMPILE)
-+
-+linux-osdata.o: ${srcdir}/common/linux-osdata.c
-+ $(COMPILE) $(srcdir)/common/linux-osdata.c
-+ $(POSTCOMPILE)
-+
-+linux-procfs.o: $(srcdir)/common/linux-procfs.c
-+ $(COMPILE) $(srcdir)/common/linux-procfs.c
-+ $(POSTCOMPILE)
-+
-+linux-ptrace.o: $(srcdir)/common/linux-ptrace.c
-+ $(COMPILE) $(srcdir)/common/linux-ptrace.c
-+ $(POSTCOMPILE)
-+
-+common-agent.o: $(srcdir)/common/agent.c
-+ $(COMPILE) $(srcdir)/common/agent.c
-+ $(POSTCOMPILE)
-+
-+vec.o: ${srcdir}/common/vec.c
-+ $(COMPILE) $(srcdir)/common/vec.c
-+ $(POSTCOMPILE)
-+
-+#
-+# gdb/tui/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+tui.o: $(srcdir)/tui/tui.c
-+ $(COMPILE) $(srcdir)/tui/tui.c
-+ $(POSTCOMPILE)
-+
-+tui-command.o: $(srcdir)/tui/tui-command.c
-+ $(COMPILE) $(srcdir)/tui/tui-command.c
-+ $(POSTCOMPILE)
-+
-+tui-data.o: $(srcdir)/tui/tui-data.c
-+ $(COMPILE) $(srcdir)/tui/tui-data.c
-+ $(POSTCOMPILE)
-+
-+tui-disasm.o: $(srcdir)/tui/tui-disasm.c
-+ $(COMPILE) $(srcdir)/tui/tui-disasm.c
-+ $(POSTCOMPILE)
-+
-+tui-file.o: $(srcdir)/tui/tui-file.c
-+ $(COMPILE) $(srcdir)/tui/tui-file.c
-+ $(POSTCOMPILE)
-+
-+tui-hooks.o: $(srcdir)/tui/tui-hooks.c
-+ $(COMPILE) $(srcdir)/tui/tui-hooks.c
-+ $(POSTCOMPILE)
-+
-+tui-interp.o: $(srcdir)/tui/tui-interp.c
-+ $(COMPILE) $(srcdir)/tui/tui-interp.c
-+ $(POSTCOMPILE)
-+
-+tui-io.o: $(srcdir)/tui/tui-io.c
-+ $(COMPILE) $(srcdir)/tui/tui-io.c
-+ $(POSTCOMPILE)
-+
-+tui-layout.o: $(srcdir)/tui/tui-layout.c
-+ $(COMPILE) $(srcdir)/tui/tui-layout.c
-+ $(POSTCOMPILE)
-+
-+tui-out.o: $(srcdir)/tui/tui-out.c
-+ $(COMPILE) $(srcdir)/tui/tui-out.c
-+ $(POSTCOMPILE)
-+
-+tui-regs.o: $(srcdir)/tui/tui-regs.c
-+ $(COMPILE) $(srcdir)/tui/tui-regs.c
-+ $(POSTCOMPILE)
-+
-+tui-source.o: $(srcdir)/tui/tui-source.c
-+ $(COMPILE) $(srcdir)/tui/tui-source.c
-+ $(POSTCOMPILE)
-+
-+tui-stack.o: $(srcdir)/tui/tui-stack.c
-+ $(COMPILE) $(srcdir)/tui/tui-stack.c
-+ $(POSTCOMPILE)
-+
-+tui-win.o: $(srcdir)/tui/tui-win.c
-+ $(COMPILE) $(srcdir)/tui/tui-win.c
-+ $(POSTCOMPILE)
-+
-+tui-windata.o: $(srcdir)/tui/tui-windata.c
-+ $(COMPILE) $(srcdir)/tui/tui-windata.c
-+ $(POSTCOMPILE)
-+
-+tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
-+ $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
-+ $(POSTCOMPILE)
-+
-+tui-winsource.o: $(srcdir)/tui/tui-winsource.c
-+ $(COMPILE) $(srcdir)/tui/tui-winsource.c
-+ $(POSTCOMPILE)
-+
-+#
-+# gdb/python/ dependencies
-+#
-+# Need to explicitly specify the compile rule as make will do nothing
-+# or try to compile the object file into the sub-directory.
-+
-+# Flags needed to compile Python code
-+PYTHON_CFLAGS=@PYTHON_CFLAGS@
-+
-+python.o: $(srcdir)/python/python.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
-+ $(POSTCOMPILE)
-+
-+py-auto-load.o: $(srcdir)/python/py-auto-load.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-auto-load.c
-+ $(POSTCOMPILE)
-+
-+py-block.o: $(srcdir)/python/py-block.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
-+ $(POSTCOMPILE)
-+
-+py-bpevent.o: $(srcdir)/python/py-bpevent.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-bpevent.c
-+ $(POSTCOMPILE)
-+
-+py-breakpoint.o: $(srcdir)/python/py-breakpoint.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c
-+ $(POSTCOMPILE)
-+
-+py-cmd.o: $(srcdir)/python/py-cmd.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
-+ $(POSTCOMPILE)
-+
-+py-continueevent.o: $(srcdir)/python/py-continueevent.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-continueevent.c
-+ $(POSTCOMPILE)
-+
-+py-event.o: $(srcdir)/python/py-event.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-event.c
-+ $(POSTCOMPILE)
-+
-+py-evtregistry.o: $(srcdir)/python/py-evtregistry.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evtregistry.c
-+ $(POSTCOMPILE)
-+
-+py-evts.o: $(srcdir)/python/py-evts.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evts.c
-+ $(POSTCOMPILE)
-+
-+py-exitedevent.o: $(srcdir)/python/py-exitedevent.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-exitedevent.c
-+ $(POSTCOMPILE)
-+
-+py-finishbreakpoint.o: $(srcdir)/python/py-finishbreakpoint.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-finishbreakpoint.c
-+ $(POSTCOMPILE)
-+
-+py-frame.o: $(srcdir)/python/py-frame.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
-+ $(POSTCOMPILE)
-+
-+py-function.o: $(srcdir)/python/py-function.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c
-+ $(POSTCOMPILE)
-+
-+py-inferior.o: $(srcdir)/python/py-inferior.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-inferior.c
-+ $(POSTCOMPILE)
-+
-+py-infthread.o: $(srcdir)/python/py-infthread.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infthread.c
-+ $(POSTCOMPILE)
-+
-+py-lazy-string.o: $(srcdir)/python/py-lazy-string.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c
-+ $(POSTCOMPILE)
-+
-+py-newobjfileevent.o: $(srcdir)/python/py-newobjfileevent.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-newobjfileevent.c
-+ $(POSTCOMPILE)
-+
-+py-objfile.o: $(srcdir)/python/py-objfile.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c
-+ $(POSTCOMPILE)
-+
-+py-param.o: $(srcdir)/python/py-param.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-param.c
-+ $(POSTCOMPILE)
-+
-+py-prettyprint.o: $(srcdir)/python/py-prettyprint.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c
-+ $(POSTCOMPILE)
-+
-+py-progspace.o: $(srcdir)/python/py-progspace.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-progspace.c
-+ $(POSTCOMPILE)
-+
-+py-signalevent.o: $(srcdir)/python/py-signalevent.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-signalevent.c
-+ $(POSTCOMPILE)
-+
-+py-stopevent.o: $(srcdir)/python/py-stopevent.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-stopevent.c
-+ $(POSTCOMPILE)
-+
-+py-symbol.o: $(srcdir)/python/py-symbol.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
-+ $(POSTCOMPILE)
-+
-+py-symtab.o: $(srcdir)/python/py-symtab.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
-+ $(POSTCOMPILE)
-+
-+py-threadevent.o: $(srcdir)/python/py-threadevent.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-threadevent.c
-+ $(POSTCOMPILE)
-+
-+py-type.o: $(srcdir)/python/py-type.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
-+ $(POSTCOMPILE)
-+
-+py-utils.o: $(srcdir)/python/py-utils.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
-+ $(POSTCOMPILE)
-+
-+py-value.o: $(srcdir)/python/py-value.c
-+ $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
-+ $(POSTCOMPILE)
-+
-+#
-+# Dependency tracking. Most of this is conditional on GNU Make being
-+# found by configure; if GNU Make is not found, we fall back to a
-+# simpler scheme.
-+#
-+
-+@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
-+# Note that we put the dependencies into a .Tpo file, then move them
-+# into place if the compile succeeds. We need this because gcc does
-+# not atomically write the dependency output file.
-+@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-+@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo
-+@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-+@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po
-+@GMAKE_TRUE@else
-+@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
-+@GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
-+# depcomp handles atomicity for us, so we don't need a postcompile
-+# step.
-+@GMAKE_TRUE@override POSTCOMPILE =
-+@GMAKE_TRUE@endif
-+
-+# A list of all the objects we might care about in this build, for
-+# dependency tracking.
-+all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
-+ test-cp-name-parser.o
-+
-+# Ensure that generated files are created early. Use order-only
-+# dependencies if available. They require GNU make 3.80 or newer,
-+# and the .VARIABLES variable was introduced at the same time.
-+@GMAKE_TRUE@ifdef .VARIABLES
-+@GMAKE_TRUE@$(all_object_files): | $(generated_files)
-+@GMAKE_TRUE@else
-+$(all_object_files) : $(generated_files)
-+@GMAKE_TRUE@endif
-+
-+# Dependencies.
-+@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
-+
-+### end of the gdb Makefile.in.
diff -Nbaur gdb-7.5.1/sim/common/Make-common.in gdb-7.5.1-arm/sim/common/Make-common.in
--- gdb-7.5.1/sim/common/Make-common.in 2012-03-19 04:54:47.000000000 +0000
+++ gdb-7.5.1-arm/sim/common/Make-common.in 2012-12-16 02:41:22.000000000 +0000