diff --git a/dka-crtls/ds_arm7.ld b/dka-crtls/ds_arm7.ld
index ba14a14..1268f15 100644
--- a/dka-crtls/ds_arm7.ld
+++ b/dka-crtls/ds_arm7.ld
@@ -1,293 +1,293 @@
-/* Linker Script Original v1.3 by Jeff Frohwein     */
-/*  v1.0 - Original release                         */
-/*  v1.1 - Added proper .data section support       */
-/*  v1.2 - Added support for c++ & iwram overlays   */
-/*       - Major contributions by Jason Wilkins.    */
-/*  v1.3 - .ewram section now can be used when      */
-/*         compiling for MULTIBOOT mode. This fixes */
-/*         malloc() in DevKitAdvance which depends  */
-/*         on __eheap_start instead of end to define*/
-/*         the starting location of heap space.     */
-/*         External global variable __gba_iwram_heap*/
-/*         support added to allow labels end, _end, */
-/*         & __end__ to point to end of iwram or    */
-/*         the end of ewram.                        */
-/*                                                  */
-/* Additions by WinterMute	                    */
-/* v1.4 - .sbss section added for unitialised       */
-/*        data in ewram                             */
-/* v1.5 - padding section added to stop EZF         */
-/*        stripping important data                  */
-/* Additions by Joat:                               */
-/* v1.6 - Adapted for the DS                        */
-
-/* This file is released into the public domain     */
-/* for commercial or non-commercial use with no     */
-/* restrictions placed upon it.                     */
-
-/* NOTE!!!: This linker script defines the RAM &  */
-/*   ROM start addresses. In order for it to work */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-/* SEARCH_DIR(/bin/arm); */
-
-/* The linker script function "var1 += var2;" sometimes    */
-/* reports incorrect values in the *.map file but the      */
-/* actual value it calculates is usually, if not always,   */
-/* correct. If you leave out the ". = ALIGN(4);" at the    */
-/* end of each section then the return value of SIZEOF()   */
-/* is sometimes incorrect and "var1 += var2;" appears to   */
-/* not work as well. "var1 += var2" style functions are    */
-/* avoided below as a result.                              */
-
-/* The linker script MEMORY directive is not used here due    */
-/* to the fact that __text_start is not always a fixed value. */
-
-__ewram_start		=	0x03800000;
-/*__ewram_start		=	0x023C0000;*/
-__text_start 		=	0x02380000;
-__eheap_end		=	0x03810000 - 0x1000;
-/*__eheap_end		=	0x02400000;*/
-__iwram_start		=	0x03810000 - 0x800;/* tiny, error */
-__iheap_end		=	0x03810000 - 0x400;
-__sp_usr		=	0x03810000 - 0x140;
-__sp_irq		=	0x03810000 - 0x60;
-__sp_usr_offset		=	__sp_usr - __iwram_start;
-
-SECTIONS
-{
-	. = __text_start;
-  .init :
-  {
-    KEEP (*(.init))
-    . = ALIGN(4);
-  } =0xff
-
-	.plt :
- 	{
-		*(.plt)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	}
-
-  .text  :   /* ALIGN (4): */
-  {
-    *(EXCLUDE_FILE (*.iwram*) .text)
-    *(.text.*)
-    *(.stub)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-    *(.glue_7)
-    *(.glue_7t)
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-  __text_end = .;
-  .fini           :
-  {
-    KEEP (*(.fini))
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } =0
-
-  .rodata :
-  {
-    *(.rodata)
-    *all.rodata*(*)
-    *(.roda)
-    *(.rodata.*)
-    *(.gnu.linkonce.r*)
-    SORT(CONSTRUCTORS)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-
-  .ctors :
-  {
-    /* gcc uses crtbegin.o to find the start of the constructors, so
-       we make sure it is first.  Because this is a wildcard, it
-       doesn't matter if the user does not actually link against
-       crtbegin.o; the linker won't look for a file to match a
-       wildcard.  The wildcard also means that it doesn't matter which
-       directory crtbegin.o is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-
-  .dtors :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-   .jcr            : { KEEP (*(.jcr)) }
-
-/*  laddr = ADDR(.init) + SIZEOF(.init) +  SIZEOF(.text) + SIZEOF(.fini) + SIZEOF(.rodata) + SIZEOF(.ctors) + SIZEOF(.dtors);
-*/
-  .eh_frame :
-  {
-    KEEP (*(.eh_frame))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-
-  .gcc_except_table :
-  {
-    *(.gcc_except_table)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-  __iwram_lma = .;
-
-  .iwram __iwram_start : AT (__iwram_lma)
-  {
-    __iwram_start = ABSOLUTE(.) ;
-    *(.iwram)
-    *iwram.*(.text)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-
-  __data_lma = __iwram_lma + SIZEOF(.iwram) ;
-  __iwram_end = . ;
-
-  .bss ALIGN(4) :
-  {
-   __bss_start = ABSOLUTE(.);
-   __bss_start__ = ABSOLUTE(.);
-   *(.dynbss)
-   *(.gnu.linkonce.b*)
-   *(COMMON)
-   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-  }
-
-  __bss_end = . ;
-  __bss_end__ = . ;
-
-  .data ALIGN(4) : AT (__data_lma)
-  {
-    __data_start = ABSOLUTE(.);
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  } = 0xff
-
-  __iwram_overlay_lma = __data_lma + SIZEOF(.data);
-
-  __data_end  =  .;
-  PROVIDE (edata = .);
-  __iwram_overlay_start = . ;
-
-  OVERLAY : NOCROSSREFS AT (__iwram_overlay_lma)
-  {
-     .iwram0 { *(.iwram0) . = ALIGN(4);}
-     .iwram1 { *(.iwram1) . = ALIGN(4);}
-     .iwram2 { *(.iwram2) . = ALIGN(4);}
-     .iwram3 { *(.iwram3) . = ALIGN(4);}
-     .iwram4 { *(.iwram4) . = ALIGN(4);}
-     .iwram5 { *(.iwram5) . = ALIGN(4);}
-     .iwram6 { *(.iwram6) . = ALIGN(4);}
-     .iwram7 { *(.iwram7) . = ALIGN(4);}
-     .iwram8 { *(.iwram8) . = ALIGN(4);}
-     .iwram9 { *(.iwram9) . = ALIGN(4);}
-  } = 0xff
-  __ewram_lma = LOADADDR(.iwram0) + SIZEOF(.iwram0)+SIZEOF(.iwram1)+SIZEOF(.iwram2)+SIZEOF(.iwram3)+SIZEOF(.iwram4)+SIZEOF(.iwram5)+SIZEOF(.iwram6)+SIZEOF(.iwram7)+SIZEOF(.iwram8)+SIZEOF(.iwram9);
-
-  __iwram_overlay_end = . ;
-  __iheap_start = . ;
-
-  .ewram __ewram_start : AT (__ewram_lma)
-  {
-    *(.ewram)
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-  __ewram_overlay_lma = __ewram_lma + SIZEOF(.ewram);
-
-	.sbss ALIGN(4):
- 	{
- 		*(.sbss)
- 		. = ALIGN(4);
- 	}
-
-  __ewram_end = . ;
-  __ewram_overlay_start = . ;
-
-  OVERLAY ALIGN(4): NOCROSSREFS AT (__ewram_overlay_lma)
-  {
-     .ewram0 { *(.ewram0) . = ALIGN(4);}
-     .ewram1 { *(.ewram1) . = ALIGN(4);}
-     .ewram2 { *(.ewram2) . = ALIGN(4);}
-     .ewram3 { *(.ewram3) . = ALIGN(4);}
-     .ewram4 { *(.ewram4) . = ALIGN(4);}
-     .ewram5 { *(.ewram5) . = ALIGN(4);}
-     .ewram6 { *(.ewram6) . = ALIGN(4);}
-     .ewram7 { *(.ewram7) . = ALIGN(4);}
-     .ewram8 { *(.ewram8) . = ALIGN(4);}
-     .ewram9 { *(.ewram9) . = ALIGN(4);}
-  } = 0xff
-
-  __pad_lma = LOADADDR(.ewram0) + SIZEOF(.ewram0)+SIZEOF(.ewram1)+SIZEOF(.ewram2)+SIZEOF(.ewram3)+SIZEOF(.ewram4)+SIZEOF(.ewram5)+SIZEOF(.ewram6)+SIZEOF(.ewram7)+SIZEOF(.ewram8)+SIZEOF(.ewram9);
-
-	/* EZF Advance strips trailing 0xff bytes, add a pad section so nothing important is removed */
-	.pad ALIGN(4) : AT (__pad_lma)
-	{
-		LONG(0x52416b64)
-		LONG(0x4d)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} = 0xff
-
-	__ewram_overlay_end = . ;
-	__eheap_start = . ;
-
-	_end = .;
-	__end__ = _end ; /* v1.3 */
-	PROVIDE (end = _end); /* v1.3 */
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}
+/* Linker Script Original v1.3 by Jeff Frohwein     */
+/*  v1.0 - Original release                         */
+/*  v1.1 - Added proper .data section support       */
+/*  v1.2 - Added support for c++ & iwram overlays   */
+/*       - Major contributions by Jason Wilkins.    */
+/*  v1.3 - .ewram section now can be used when      */
+/*         compiling for MULTIBOOT mode. This fixes */
+/*         malloc() in DevKitAdvance which depends  */
+/*         on __eheap_start instead of end to define*/
+/*         the starting location of heap space.     */
+/*         External global variable __gba_iwram_heap*/
+/*         support added to allow labels end, _end, */
+/*         & __end__ to point to end of iwram or    */
+/*         the end of ewram.                        */
+/*                                                  */
+/* Additions by WinterMute	                    */
+/* v1.4 - .sbss section added for unitialised       */
+/*        data in ewram                             */
+/* v1.5 - padding section added to stop EZF         */
+/*        stripping important data                  */
+/* Additions by Joat:                               */
+/* v1.6 - Adapted for the DS                        */
+
+/* This file is released into the public domain     */
+/* for commercial or non-commercial use with no     */
+/* restrictions placed upon it.                     */
+
+/* NOTE!!!: This linker script defines the RAM &  */
+/*   ROM start addresses. In order for it to work */
+/*   properly, remove -Ttext and -Tbss linker     */
+/*   options from your makefile if they are       */
+/*   present.                                     */
+
+/* You can use the following to view section      */
+/* addresses in your .elf file:                   */
+/*   objdump -h file.elf                          */
+/* Please note that empty sections may incorrectly*/
+/* list the lma address as the vma address for    */
+/* some versions of objdump.                      */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+/* SEARCH_DIR(/bin/arm); */
+
+/* The linker script function "var1 += var2;" sometimes    */
+/* reports incorrect values in the *.map file but the      */
+/* actual value it calculates is usually, if not always,   */
+/* correct. If you leave out the ". = ALIGN(4);" at the    */
+/* end of each section then the return value of SIZEOF()   */
+/* is sometimes incorrect and "var1 += var2;" appears to   */
+/* not work as well. "var1 += var2" style functions are    */
+/* avoided below as a result.                              */
+
+/* The linker script MEMORY directive is not used here due    */
+/* to the fact that __text_start is not always a fixed value. */
+
+__ewram_start		=	0x03800000;
+/*__ewram_start		=	0x023C0000;*/
+__text_start 		=	0x02380000;
+__eheap_end		=	0x03810000 - 0x1000;
+/*__eheap_end		=	0x02400000;*/
+__iwram_start		=	0x03810000 - 0x800;/* tiny, error */
+__iheap_end		=	0x03810000 - 0x400;
+__sp_usr		=	0x03810000 - 0x140;
+__sp_irq		=	0x03810000 - 0x60;
+__sp_usr_offset		=	__sp_usr - __iwram_start;
+
+SECTIONS
+{
+	. = __text_start;
+  .init :
+  {
+    KEEP (*(.init))
+    . = ALIGN(4);
+  } =0xff
+
+	.plt :
+ 	{
+		*(.plt)
+		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+	}
+
+  .text  :   /* ALIGN (4): */
+  {
+    *(EXCLUDE_FILE (*.iwram*) .text)
+    *(.text.*)
+    *(.stub)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.gnu.linkonce.t*)
+    *(.glue_7)
+    *(.glue_7t)
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+  __text_end = .;
+  .fini           :
+  {
+    KEEP (*(.fini))
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } =0
+
+  .rodata :
+  {
+    *(.rodata)
+    *all.rodata*(*)
+    *(.roda)
+    *(.rodata.*)
+    *(.gnu.linkonce.r*)
+    SORT(CONSTRUCTORS)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+
+  .ctors :
+  {
+    /* gcc uses crtbegin.o to find the start of the constructors, so
+       we make sure it is first.  Because this is a wildcard, it
+       doesn't matter if the user does not actually link against
+       crtbegin.o; the linker won't look for a file to match a
+       wildcard.  The wildcard also means that it doesn't matter which
+       directory crtbegin.o is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+
+  .dtors :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+   .jcr            : { KEEP (*(.jcr)) }
+
+/*  laddr = ADDR(.init) + SIZEOF(.init) +  SIZEOF(.text) + SIZEOF(.fini) + SIZEOF(.rodata) + SIZEOF(.ctors) + SIZEOF(.dtors);
+*/
+  .eh_frame :
+  {
+    KEEP (*(.eh_frame))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+
+  .gcc_except_table :
+  {
+    *(.gcc_except_table)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+  __iwram_lma = .;
+
+  .iwram __iwram_start : AT (__iwram_lma)
+  {
+    __iwram_start = ABSOLUTE(.) ;
+    *(.iwram)
+    *iwram.*(.text)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+
+  __data_lma = __iwram_lma + SIZEOF(.iwram) ;
+  __iwram_end = . ;
+
+  .bss ALIGN(4) :
+  {
+   __bss_start = ABSOLUTE(.);
+   __bss_start__ = ABSOLUTE(.);
+   *(.dynbss)
+   *(.gnu.linkonce.b*)
+   *(COMMON)
+   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
+  }
+
+  __bss_end = . ;
+  __bss_end__ = . ;
+
+  .data ALIGN(4) : AT (__data_lma)
+  {
+    __data_start = ABSOLUTE(.);
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d*)
+    CONSTRUCTORS
+  } = 0xff
+
+  __iwram_overlay_lma = __data_lma + SIZEOF(.data);
+
+  __data_end  =  .;
+  PROVIDE (edata = .);
+  __iwram_overlay_start = . ;
+
+  OVERLAY : NOCROSSREFS AT (__iwram_overlay_lma)
+  {
+     .iwram0 { *(.iwram0) . = ALIGN(4);}
+     .iwram1 { *(.iwram1) . = ALIGN(4);}
+     .iwram2 { *(.iwram2) . = ALIGN(4);}
+     .iwram3 { *(.iwram3) . = ALIGN(4);}
+     .iwram4 { *(.iwram4) . = ALIGN(4);}
+     .iwram5 { *(.iwram5) . = ALIGN(4);}
+     .iwram6 { *(.iwram6) . = ALIGN(4);}
+     .iwram7 { *(.iwram7) . = ALIGN(4);}
+     .iwram8 { *(.iwram8) . = ALIGN(4);}
+     .iwram9 { *(.iwram9) . = ALIGN(4);}
+  } = 0xff
+  __ewram_lma = LOADADDR(.iwram0) + SIZEOF(.iwram0)+SIZEOF(.iwram1)+SIZEOF(.iwram2)+SIZEOF(.iwram3)+SIZEOF(.iwram4)+SIZEOF(.iwram5)+SIZEOF(.iwram6)+SIZEOF(.iwram7)+SIZEOF(.iwram8)+SIZEOF(.iwram9);
+
+  __iwram_overlay_end = . ;
+  __iheap_start = . ;
+
+  .ewram __ewram_start : AT (__ewram_lma)
+  {
+    *(.ewram)
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+  __ewram_overlay_lma = __ewram_lma + SIZEOF(.ewram);
+
+	.sbss ALIGN(4):
+ 	{
+ 		*(.sbss)
+ 		. = ALIGN(4);
+ 	}
+
+  __ewram_end = . ;
+  __ewram_overlay_start = . ;
+
+  OVERLAY ALIGN(4): NOCROSSREFS AT (__ewram_overlay_lma)
+  {
+     .ewram0 { *(.ewram0) . = ALIGN(4);}
+     .ewram1 { *(.ewram1) . = ALIGN(4);}
+     .ewram2 { *(.ewram2) . = ALIGN(4);}
+     .ewram3 { *(.ewram3) . = ALIGN(4);}
+     .ewram4 { *(.ewram4) . = ALIGN(4);}
+     .ewram5 { *(.ewram5) . = ALIGN(4);}
+     .ewram6 { *(.ewram6) . = ALIGN(4);}
+     .ewram7 { *(.ewram7) . = ALIGN(4);}
+     .ewram8 { *(.ewram8) . = ALIGN(4);}
+     .ewram9 { *(.ewram9) . = ALIGN(4);}
+  } = 0xff
+
+  __pad_lma = LOADADDR(.ewram0) + SIZEOF(.ewram0)+SIZEOF(.ewram1)+SIZEOF(.ewram2)+SIZEOF(.ewram3)+SIZEOF(.ewram4)+SIZEOF(.ewram5)+SIZEOF(.ewram6)+SIZEOF(.ewram7)+SIZEOF(.ewram8)+SIZEOF(.ewram9);
+
+	/* EZF Advance strips trailing 0xff bytes, add a pad section so nothing important is removed */
+	.pad ALIGN(4) : AT (__pad_lma)
+	{
+		LONG(0x52416b64)
+		LONG(0x4d)
+		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+	} = 0xff
+
+	__ewram_overlay_end = . ;
+	__eheap_start = . ;
+
+	_end = .;
+	__end__ = _end ; /* v1.3 */
+	PROVIDE (end = _end); /* v1.3 */
+
+	/* Stabs debugging sections.  */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	/*	DWARF debug sections.
+		Symbols in the DWARF debugging sections are relative to the beginning
+		of the section so we begin them at 0.  */
+	/* DWARF 1 */
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+	/* GNU DWARF 1 extensions */
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+	/* DWARF 1.1 and DWARF 2 */
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	/* DWARF 2 */
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+	/* SGI/MIPS DWARF 2 extensions */
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames  0 : { *(.debug_varnames) }
+	.stack 0x80000 : { _stack = .; *(.stack) }
+	/* These must appear regardless of  .  */
+}
diff --git a/dka-crtls/ds_arm7.specs b/dka-crtls/ds_arm7.specs
index e91c4cd..eb605fd 100644
--- a/dka-crtls/ds_arm7.specs
+++ b/dka-crtls/ds_arm7.specs
@@ -1,8 +1,8 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm7.ld%s
-
-*startfile:
-ds_arm7_crt0%O%s crti%O%s crtbegin%O%s
-
+%rename link                old_link
+
+*link:
+%(old_link) -T ds_arm7.ld%s
+
+*startfile:
+ds_arm7_crt0%O%s crti%O%s crtbegin%O%s
+
diff --git a/dka-crtls/ds_arm7_crt0.S b/dka-crtls/ds_arm7_crt0.S
index f982edd..2890e78 100644
--- a/dka-crtls/ds_arm7_crt0.S
+++ b/dka-crtls/ds_arm7_crt0.S
@@ -1,130 +1,130 @@
-.section ".init"
-.global _start
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-.align	4
-.arm
-
-_start:
-		mov	r0, #0x04000000			@ IME = 0;
-		add	r0, r0, #0x208
-		strh	r0, [r0]
-
-		mov	r0, #0x12			@ Switch to IRQ Mode
-		msr	cpsr, r0
-		ldr	sp, =__sp_irq			@ Set IRQ stack
-
-		mov	r0, #0x1F			@ Switch to System Mode
-		msr	cpsr, r0
-		ldr	sp, =__sp_usr			@ Set user stack
-
-		ldr	r0, =__bss_start		@ Clear BSS section to 0x00
-		ldr	r1, =__bss_end
-		sub	r1, r1, r0
-		bl	ClearMem
-
-		ldr	r1, =__data_lma			@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__data_start
-		ldr	r4, =__data_end
-		bl	CopyMemCheck
-
-		ldr	r1, =__iwram_lma		@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__iwram_start
-		ldr	r4, =__iwram_end
-		bl	CopyMemCheck
-
-		ldr	r2, =__load_stop_iwram0		@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
-		ldr	r1, =__load_start_iwram0
-		subs	r3, r2, r1			@ Is there any data to copy?
-		beq	CIW0Skip			@ no
-		ldr	r2, =__iwram_overlay_start
-		bl	CopyMem
-CIW0Skip:
-		ldr	r1, =__ewram_lma		@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__ewram_start
-		ldr	r4, =__ewram_end
-		bl	CopyMemCheck
-
-		ldr	r2, =__load_stop_ewram0	@ 	@ Copy external work ram overlay 0 (ewram0 section) from LMA to VMA (ROM to RAM)
-		ldr	r1, =__load_start_ewram0
-		subs	r3, r2, r1			@ Is there any data to copy?
-		beq	CEW0Skip			@ no
-		ldr	r2, =__ewram_overlay_start
-		bl	CopyMem
-CEW0Skip:
-		ldr	r1, =fake_heap_end		@ set heap end
-		ldr	r0, =__eheap_end
-		str	r0, [r1]
-	
-		ldr	r3, =_init			@ global constructors
-		bl	_call_via_r3
-
-		mov	r0, #0				@ int argc
-		mov	r1, #0				@ char *argv[]
-		ldr	r3, =main
-		bl	_call_via_r3			@ jump to user code
-		
-		@ If the user ever returns, return to flash cartridge
-		mov	r0, #0x08000000
-		bx	r0
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-ClearMem:	mov	r2, #3			@ Round down to nearest word boundary
-		add	r1, r1, r2		@ Shouldn't be needed
-		bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
-		bxeq	lr			@ Quit if copy size is 0
-
-		mov	r2, #0
-ClrLoop:	stmia	r0!, {r2}
-		subs	r1, r1, #4
-		bne	ClrLoop
-
-		bx	lr
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-CopyMemCheck:
-		sub	r3, r4, r2		@ Is there any data to copy?
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-CopyMem:	mov	r0, #3			@ These commands are used in cases where
-		add	r3, r3, r0		@ the length is not a multiple of 4,
-		bics	r3, r3, r0		@ even though it should be.
-		bxeq	lr			@ Length is zero, so exit
-
-CIDLoop:	ldmia	r1!, {r0}
-		stmia	r2!, {r0}
-		subs	r3, r3, #4
-		bne	CIDLoop
-
-		bx	lr
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-.align
-.pool
-
-.end
+.section ".init"
+.global _start
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+.align	4
+.arm
+
+_start:
+		mov	r0, #0x04000000			@ IME = 0;
+		add	r0, r0, #0x208
+		strh	r0, [r0]
+
+		mov	r0, #0x12			@ Switch to IRQ Mode
+		msr	cpsr, r0
+		ldr	sp, =__sp_irq			@ Set IRQ stack
+
+		mov	r0, #0x1F			@ Switch to System Mode
+		msr	cpsr, r0
+		ldr	sp, =__sp_usr			@ Set user stack
+
+		ldr	r0, =__bss_start		@ Clear BSS section to 0x00
+		ldr	r1, =__bss_end
+		sub	r1, r1, r0
+		bl	ClearMem
+
+		ldr	r1, =__data_lma			@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__data_start
+		ldr	r4, =__data_end
+		bl	CopyMemCheck
+
+		ldr	r1, =__iwram_lma		@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__iwram_start
+		ldr	r4, =__iwram_end
+		bl	CopyMemCheck
+
+		ldr	r2, =__load_stop_iwram0		@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
+		ldr	r1, =__load_start_iwram0
+		subs	r3, r2, r1			@ Is there any data to copy?
+		beq	CIW0Skip			@ no
+		ldr	r2, =__iwram_overlay_start
+		bl	CopyMem
+CIW0Skip:
+		ldr	r1, =__ewram_lma		@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__ewram_start
+		ldr	r4, =__ewram_end
+		bl	CopyMemCheck
+
+		ldr	r2, =__load_stop_ewram0	@ 	@ Copy external work ram overlay 0 (ewram0 section) from LMA to VMA (ROM to RAM)
+		ldr	r1, =__load_start_ewram0
+		subs	r3, r2, r1			@ Is there any data to copy?
+		beq	CEW0Skip			@ no
+		ldr	r2, =__ewram_overlay_start
+		bl	CopyMem
+CEW0Skip:
+		ldr	r1, =fake_heap_end		@ set heap end
+		ldr	r0, =__eheap_end
+		str	r0, [r1]
+	
+		ldr	r3, =_init			@ global constructors
+		bl	_call_via_r3
+
+		mov	r0, #0				@ int argc
+		mov	r1, #0				@ char *argv[]
+		ldr	r3, =main
+		bl	_call_via_r3			@ jump to user code
+		
+		@ If the user ever returns, return to flash cartridge
+		mov	r0, #0x08000000
+		bx	r0
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Clear memory to 0x00 if length != 0
+@  r0 = Start Address
+@  r1 = Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+ClearMem:	mov	r2, #3			@ Round down to nearest word boundary
+		add	r1, r1, r2		@ Shouldn't be needed
+		bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
+		bxeq	lr			@ Quit if copy size is 0
+
+		mov	r2, #0
+ClrLoop:	stmia	r0!, {r2}
+		subs	r1, r1, #4
+		bne	ClrLoop
+
+		bx	lr
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Copy memory if length	!= 0
+@  r1 = Source Address
+@  r2 = Dest Address
+@  r4 = Dest Address + Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+CopyMemCheck:
+		sub	r3, r4, r2		@ Is there any data to copy?
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Copy memory
+@  r1 = Source Address
+@  r2 = Dest Address
+@  r3 = Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+CopyMem:	mov	r0, #3			@ These commands are used in cases where
+		add	r3, r3, r0		@ the length is not a multiple of 4,
+		bics	r3, r3, r0		@ even though it should be.
+		bxeq	lr			@ Length is zero, so exit
+
+CIDLoop:	ldmia	r1!, {r0}
+		stmia	r2!, {r0}
+		subs	r3, r3, #4
+		bne	CIDLoop
+
+		bx	lr
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+.align
+.pool
+
+.end
diff --git a/dka-crtls/ds_arm7cart.ld b/dka-crtls/ds_arm7cart.ld
index 815b3c8..85d4124 100644
--- a/dka-crtls/ds_arm7cart.ld
+++ b/dka-crtls/ds_arm7cart.ld
@@ -1,294 +1,294 @@
-/* Linker Script Original v1.3 by Jeff Frohwein     */
-/*  v1.0 - Original release                         */
-/*  v1.1 - Added proper .data section support       */
-/*  v1.2 - Added support for c++ & iwram overlays   */
-/*       - Major contributions by Jason Wilkins.    */
-/*  v1.3 - .ewram section now can be used when      */
-/*         compiling for MULTIBOOT mode. This fixes */
-/*         malloc() in DevKitAdvance which depends  */
-/*         on __eheap_start instead of end to define*/
-/*         the starting location of heap space.     */
-/*         External global variable __gba_iwram_heap*/
-/*         support added to allow labels end, _end, */
-/*         & __end__ to point to end of iwram or    */
-/*         the end of ewram.                        */
-/*                                                  */
-/* Additions by WinterMute	                    */
-/* v1.4 - .sbss section added for unitialised       */
-/*        data in ewram                             */
-/* v1.5 - padding section added to stop EZF         */
-/*        stripping important data                  */
-/* Additions by Joat:                               */
-/* v1.6 - Adapted for the DS                        */
-
-/* This file is released into the public domain     */
-/* for commercial or non-commercial use with no     */
-/* restrictions placed upon it.                     */
-
-/* NOTE!!!: This linker script defines the RAM &  */
-/*   ROM start addresses. In order for it to work */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-/* SEARCH_DIR(/bin/arm); */
-
-/* By default this linker script will generate code        */
-/* for flash carts located at 0x8000000.                   */
-
-/* The linker script function "var1 += var2;" sometimes    */
-/* reports incorrect values in the *.map file but the      */
-/* actual value it calculates is usually, if not always,   */
-/* correct. If you leave out the ". = ALIGN(4);" at the    */
-/* end of each section then the return value of SIZEOF()   */
-/* is sometimes incorrect and "var1 += var2;" appears to   */
-/* not work as well. "var1 += var2" style functions are    */
-/* avoided below as a result.                              */
-
-/* The linker script MEMORY directive is not used here due    */
-/* to the fact that __text_start is not always a fixed value. */
-
-__text_start 		=	0x08000000;
-__eheap_end		=	0x03802000;
-__ewram_start 		= 	0x03800000;
-__iwram_start		=	0x03802000;
-__iheap_end		=	0x03810000 - 0x400;
-__sp_usr		=	0x03810000 - 0x100;
-__sp_irq		=	0x03810000 - 0x60;
-__sp_usr_offset		=	__sp_usr - __iwram_start;
-
-SECTIONS
-{
-	. = __text_start;
-  .init :
-  {
-    KEEP (*(.init))
-    . = ALIGN(4);
-  } =0xff
-
-	.plt :
- 	{
-		*(.plt)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	}
-
-  .text  :   /* ALIGN (4): */
-  {
-    *(EXCLUDE_FILE (*.iwram*) .text)
-    *(.text.*)
-    *(.stub)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-    *(.glue_7)
-    *(.glue_7t)
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-  __text_end = .;
-  .fini           :
-  {
-    KEEP (*(.fini))
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } =0
-
-  .rodata :
-  {
-    *(.rodata)
-    *all.rodata*(*)
-    *(.roda)
-    *(.rodata.*)
-    *(.gnu.linkonce.r*)
-    SORT(CONSTRUCTORS)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-
-  .ctors :
-  {
-    /* gcc uses crtbegin.o to find the start of the constructors, so
-       we make sure it is first.  Because this is a wildcard, it
-       doesn't matter if the user does not actually link against
-       crtbegin.o; the linker won't look for a file to match a
-       wildcard.  The wildcard also means that it doesn't matter which
-       directory crtbegin.o is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-
-  .dtors :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-   .jcr            : { KEEP (*(.jcr)) }
-
-/*  laddr = ADDR(.init) + SIZEOF(.init) +  SIZEOF(.text) + SIZEOF(.fini) + SIZEOF(.rodata) + SIZEOF(.ctors) + SIZEOF(.dtors);
-*/
-  .eh_frame :
-  {
-    KEEP (*(.eh_frame))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-
-  .gcc_except_table :
-  {
-    *(.gcc_except_table)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-  __iwram_lma = .;
-
-  .iwram __iwram_start : AT (__iwram_lma)
-  {
-    __iwram_start = ABSOLUTE(.) ;
-    *(.iwram)
-    *iwram.*(.text)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-
-  __data_lma = __iwram_lma + SIZEOF(.iwram) ;
-  __iwram_end = . ;
-
-  .bss ALIGN(4) :
-  {
-   __bss_start = ABSOLUTE(.);
-   __bss_start__ = ABSOLUTE(.);
-   *(.dynbss)
-   *(.gnu.linkonce.b*)
-   *(COMMON)
-   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-  }
-
-  __bss_end = . ;
-  __bss_end__ = . ;
-
-  .data ALIGN(4) : AT (__data_lma)
-  {
-    __data_start = ABSOLUTE(.);
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  } = 0xff
-
-  __iwram_overlay_lma = __data_lma + SIZEOF(.data);
-
-  __data_end  =  .;
-  PROVIDE (edata = .);
-  __iwram_overlay_start = . ;
-
-  OVERLAY : NOCROSSREFS AT (__iwram_overlay_lma)
-  {
-     .iwram0 { *(.iwram0) . = ALIGN(4);}
-     .iwram1 { *(.iwram1) . = ALIGN(4);}
-     .iwram2 { *(.iwram2) . = ALIGN(4);}
-     .iwram3 { *(.iwram3) . = ALIGN(4);}
-     .iwram4 { *(.iwram4) . = ALIGN(4);}
-     .iwram5 { *(.iwram5) . = ALIGN(4);}
-     .iwram6 { *(.iwram6) . = ALIGN(4);}
-     .iwram7 { *(.iwram7) . = ALIGN(4);}
-     .iwram8 { *(.iwram8) . = ALIGN(4);}
-     .iwram9 { *(.iwram9) . = ALIGN(4);}
-  } = 0xff
-  __ewram_lma = LOADADDR(.iwram0) + SIZEOF(.iwram0)+SIZEOF(.iwram1)+SIZEOF(.iwram2)+SIZEOF(.iwram3)+SIZEOF(.iwram4)+SIZEOF(.iwram5)+SIZEOF(.iwram6)+SIZEOF(.iwram7)+SIZEOF(.iwram8)+SIZEOF(.iwram9);
-
-  __iwram_overlay_end = . ;
-  __iheap_start = . ;
-
-  .ewram __ewram_start : AT (__ewram_lma)
-  {
-    *(.ewram)
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-  __ewram_overlay_lma = __ewram_lma + SIZEOF(.ewram);
-
-	.sbss ALIGN(4):
- 	{
- 		*(.sbss)
- 		. = ALIGN(4);
- 	}
-
-  __ewram_end = . ;
-  __ewram_overlay_start = . ;
-
-  OVERLAY ALIGN(4): NOCROSSREFS AT (__ewram_overlay_lma)
-  {
-     .ewram0 { *(.ewram0) . = ALIGN(4);}
-     .ewram1 { *(.ewram1) . = ALIGN(4);}
-     .ewram2 { *(.ewram2) . = ALIGN(4);}
-     .ewram3 { *(.ewram3) . = ALIGN(4);}
-     .ewram4 { *(.ewram4) . = ALIGN(4);}
-     .ewram5 { *(.ewram5) . = ALIGN(4);}
-     .ewram6 { *(.ewram6) . = ALIGN(4);}
-     .ewram7 { *(.ewram7) . = ALIGN(4);}
-     .ewram8 { *(.ewram8) . = ALIGN(4);}
-     .ewram9 { *(.ewram9) . = ALIGN(4);}
-  } = 0xff
-
-  __pad_lma = LOADADDR(.ewram0) + SIZEOF(.ewram0)+SIZEOF(.ewram1)+SIZEOF(.ewram2)+SIZEOF(.ewram3)+SIZEOF(.ewram4)+SIZEOF(.ewram5)+SIZEOF(.ewram6)+SIZEOF(.ewram7)+SIZEOF(.ewram8)+SIZEOF(.ewram9);
-
-	/* EZF Advance strips trailing 0xff bytes, add a pad section so nothing important is removed */
-	.pad ALIGN(4) : AT (__pad_lma)
-	{
-		LONG(0x52416b64)
-		LONG(0x4d)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} = 0xff
-
-	__ewram_overlay_end = . ;
-	__eheap_start = . ;
-
-	_end = .;
-	__end__ = _end ; /* v1.3 */
-	PROVIDE (end = _end); /* v1.3 */
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}
+/* Linker Script Original v1.3 by Jeff Frohwein     */
+/*  v1.0 - Original release                         */
+/*  v1.1 - Added proper .data section support       */
+/*  v1.2 - Added support for c++ & iwram overlays   */
+/*       - Major contributions by Jason Wilkins.    */
+/*  v1.3 - .ewram section now can be used when      */
+/*         compiling for MULTIBOOT mode. This fixes */
+/*         malloc() in DevKitAdvance which depends  */
+/*         on __eheap_start instead of end to define*/
+/*         the starting location of heap space.     */
+/*         External global variable __gba_iwram_heap*/
+/*         support added to allow labels end, _end, */
+/*         & __end__ to point to end of iwram or    */
+/*         the end of ewram.                        */
+/*                                                  */
+/* Additions by WinterMute	                    */
+/* v1.4 - .sbss section added for unitialised       */
+/*        data in ewram                             */
+/* v1.5 - padding section added to stop EZF         */
+/*        stripping important data                  */
+/* Additions by Joat:                               */
+/* v1.6 - Adapted for the DS                        */
+
+/* This file is released into the public domain     */
+/* for commercial or non-commercial use with no     */
+/* restrictions placed upon it.                     */
+
+/* NOTE!!!: This linker script defines the RAM &  */
+/*   ROM start addresses. In order for it to work */
+/*   properly, remove -Ttext and -Tbss linker     */
+/*   options from your makefile if they are       */
+/*   present.                                     */
+
+/* You can use the following to view section      */
+/* addresses in your .elf file:                   */
+/*   objdump -h file.elf                          */
+/* Please note that empty sections may incorrectly*/
+/* list the lma address as the vma address for    */
+/* some versions of objdump.                      */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+/* SEARCH_DIR(/bin/arm); */
+
+/* By default this linker script will generate code        */
+/* for flash carts located at 0x8000000.                   */
+
+/* The linker script function "var1 += var2;" sometimes    */
+/* reports incorrect values in the *.map file but the      */
+/* actual value it calculates is usually, if not always,   */
+/* correct. If you leave out the ". = ALIGN(4);" at the    */
+/* end of each section then the return value of SIZEOF()   */
+/* is sometimes incorrect and "var1 += var2;" appears to   */
+/* not work as well. "var1 += var2" style functions are    */
+/* avoided below as a result.                              */
+
+/* The linker script MEMORY directive is not used here due    */
+/* to the fact that __text_start is not always a fixed value. */
+
+__text_start 		=	0x08000000;
+__eheap_end		=	0x03802000;
+__ewram_start 		= 	0x03800000;
+__iwram_start		=	0x03802000;
+__iheap_end		=	0x03810000 - 0x400;
+__sp_usr		=	0x03810000 - 0x100;
+__sp_irq		=	0x03810000 - 0x60;
+__sp_usr_offset		=	__sp_usr - __iwram_start;
+
+SECTIONS
+{
+	. = __text_start;
+  .init :
+  {
+    KEEP (*(.init))
+    . = ALIGN(4);
+  } =0xff
+
+	.plt :
+ 	{
+		*(.plt)
+		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+	}
+
+  .text  :   /* ALIGN (4): */
+  {
+    *(EXCLUDE_FILE (*.iwram*) .text)
+    *(.text.*)
+    *(.stub)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.gnu.linkonce.t*)
+    *(.glue_7)
+    *(.glue_7t)
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+  __text_end = .;
+  .fini           :
+  {
+    KEEP (*(.fini))
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } =0
+
+  .rodata :
+  {
+    *(.rodata)
+    *all.rodata*(*)
+    *(.roda)
+    *(.rodata.*)
+    *(.gnu.linkonce.r*)
+    SORT(CONSTRUCTORS)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+
+  .ctors :
+  {
+    /* gcc uses crtbegin.o to find the start of the constructors, so
+       we make sure it is first.  Because this is a wildcard, it
+       doesn't matter if the user does not actually link against
+       crtbegin.o; the linker won't look for a file to match a
+       wildcard.  The wildcard also means that it doesn't matter which
+       directory crtbegin.o is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+
+  .dtors :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+   .jcr            : { KEEP (*(.jcr)) }
+
+/*  laddr = ADDR(.init) + SIZEOF(.init) +  SIZEOF(.text) + SIZEOF(.fini) + SIZEOF(.rodata) + SIZEOF(.ctors) + SIZEOF(.dtors);
+*/
+  .eh_frame :
+  {
+    KEEP (*(.eh_frame))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+
+  .gcc_except_table :
+  {
+    *(.gcc_except_table)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+  __iwram_lma = .;
+
+  .iwram __iwram_start : AT (__iwram_lma)
+  {
+    __iwram_start = ABSOLUTE(.) ;
+    *(.iwram)
+    *iwram.*(.text)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+
+  __data_lma = __iwram_lma + SIZEOF(.iwram) ;
+  __iwram_end = . ;
+
+  .bss ALIGN(4) :
+  {
+   __bss_start = ABSOLUTE(.);
+   __bss_start__ = ABSOLUTE(.);
+   *(.dynbss)
+   *(.gnu.linkonce.b*)
+   *(COMMON)
+   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
+  }
+
+  __bss_end = . ;
+  __bss_end__ = . ;
+
+  .data ALIGN(4) : AT (__data_lma)
+  {
+    __data_start = ABSOLUTE(.);
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d*)
+    CONSTRUCTORS
+  } = 0xff
+
+  __iwram_overlay_lma = __data_lma + SIZEOF(.data);
+
+  __data_end  =  .;
+  PROVIDE (edata = .);
+  __iwram_overlay_start = . ;
+
+  OVERLAY : NOCROSSREFS AT (__iwram_overlay_lma)
+  {
+     .iwram0 { *(.iwram0) . = ALIGN(4);}
+     .iwram1 { *(.iwram1) . = ALIGN(4);}
+     .iwram2 { *(.iwram2) . = ALIGN(4);}
+     .iwram3 { *(.iwram3) . = ALIGN(4);}
+     .iwram4 { *(.iwram4) . = ALIGN(4);}
+     .iwram5 { *(.iwram5) . = ALIGN(4);}
+     .iwram6 { *(.iwram6) . = ALIGN(4);}
+     .iwram7 { *(.iwram7) . = ALIGN(4);}
+     .iwram8 { *(.iwram8) . = ALIGN(4);}
+     .iwram9 { *(.iwram9) . = ALIGN(4);}
+  } = 0xff
+  __ewram_lma = LOADADDR(.iwram0) + SIZEOF(.iwram0)+SIZEOF(.iwram1)+SIZEOF(.iwram2)+SIZEOF(.iwram3)+SIZEOF(.iwram4)+SIZEOF(.iwram5)+SIZEOF(.iwram6)+SIZEOF(.iwram7)+SIZEOF(.iwram8)+SIZEOF(.iwram9);
+
+  __iwram_overlay_end = . ;
+  __iheap_start = . ;
+
+  .ewram __ewram_start : AT (__ewram_lma)
+  {
+    *(.ewram)
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+  __ewram_overlay_lma = __ewram_lma + SIZEOF(.ewram);
+
+	.sbss ALIGN(4):
+ 	{
+ 		*(.sbss)
+ 		. = ALIGN(4);
+ 	}
+
+  __ewram_end = . ;
+  __ewram_overlay_start = . ;
+
+  OVERLAY ALIGN(4): NOCROSSREFS AT (__ewram_overlay_lma)
+  {
+     .ewram0 { *(.ewram0) . = ALIGN(4);}
+     .ewram1 { *(.ewram1) . = ALIGN(4);}
+     .ewram2 { *(.ewram2) . = ALIGN(4);}
+     .ewram3 { *(.ewram3) . = ALIGN(4);}
+     .ewram4 { *(.ewram4) . = ALIGN(4);}
+     .ewram5 { *(.ewram5) . = ALIGN(4);}
+     .ewram6 { *(.ewram6) . = ALIGN(4);}
+     .ewram7 { *(.ewram7) . = ALIGN(4);}
+     .ewram8 { *(.ewram8) . = ALIGN(4);}
+     .ewram9 { *(.ewram9) . = ALIGN(4);}
+  } = 0xff
+
+  __pad_lma = LOADADDR(.ewram0) + SIZEOF(.ewram0)+SIZEOF(.ewram1)+SIZEOF(.ewram2)+SIZEOF(.ewram3)+SIZEOF(.ewram4)+SIZEOF(.ewram5)+SIZEOF(.ewram6)+SIZEOF(.ewram7)+SIZEOF(.ewram8)+SIZEOF(.ewram9);
+
+	/* EZF Advance strips trailing 0xff bytes, add a pad section so nothing important is removed */
+	.pad ALIGN(4) : AT (__pad_lma)
+	{
+		LONG(0x52416b64)
+		LONG(0x4d)
+		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+	} = 0xff
+
+	__ewram_overlay_end = . ;
+	__eheap_start = . ;
+
+	_end = .;
+	__end__ = _end ; /* v1.3 */
+	PROVIDE (end = _end); /* v1.3 */
+
+	/* Stabs debugging sections.  */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	/*	DWARF debug sections.
+		Symbols in the DWARF debugging sections are relative to the beginning
+		of the section so we begin them at 0.  */
+	/* DWARF 1 */
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+	/* GNU DWARF 1 extensions */
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+	/* DWARF 1.1 and DWARF 2 */
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	/* DWARF 2 */
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+	/* SGI/MIPS DWARF 2 extensions */
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames  0 : { *(.debug_varnames) }
+	.stack 0x80000 : { _stack = .; *(.stack) }
+	/* These must appear regardless of  .  */
+}
diff --git a/dka-crtls/ds_arm7cart.specs b/dka-crtls/ds_arm7cart.specs
index 84c87be..d98cd5d 100644
--- a/dka-crtls/ds_arm7cart.specs
+++ b/dka-crtls/ds_arm7cart.specs
@@ -1,8 +1,8 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm7cart.ld%s
-
-*startfile:
-ds_cart_crt0%O%s crti%O%s crtbegin%O%s
-
+%rename link                old_link
+
+*link:
+%(old_link) -T ds_arm7cart.ld%s
+
+*startfile:
+dscart_crt0%O%s crti%O%s crtbegin%O%s
+
diff --git a/dka-crtls/ds_arm9.ld b/dka-crtls/ds_arm9.ld
index 56802d8..ab1fd90 100644
--- a/dka-crtls/ds_arm9.ld
+++ b/dka-crtls/ds_arm9.ld
@@ -1,291 +1,292 @@
-/* Linker Script Original v1.3 by Jeff Frohwein     */
-/*  v1.0 - Original release                         */
-/*  v1.1 - Added proper .data section support       */
-/*  v1.2 - Added support for c++ & iwram overlays   */
-/*       - Major contributions by Jason Wilkins.    */
-/*  v1.3 - .ewram section now can be used when      */
-/*         compiling for MULTIBOOT mode. This fixes */
-/*         malloc() in DevKitAdvance which depends  */
-/*         on __eheap_start instead of end to define*/
-/*         the starting location of heap space.     */
-/*         External global variable __gba_iwram_heap*/
-/*         support added to allow labels end, _end, */
-/*         & __end__ to point to end of iwram or    */
-/*         the end of ewram.                        */
-/*                                                  */
-/* Additions by WinterMute	                    */
-/* v1.4 - .sbss section added for unitialised       */
-/*        data in ewram                             */
-/* v1.5 - padding section added to stop EZF         */
-/*        stripping important data                  */
-/* Additions by Joat:                               */
-/* v1.6 - Adapted for the DS                        */
-
-/* This file is released into the public domain     */
-/* for commercial or non-commercial use with no     */
-/* restrictions placed upon it.                     */
-
-/* NOTE!!!: This linker script defines the RAM &  */
-/*   ROM start addresses. In order for it to work */
-/*   properly, remove -Ttext and -Tbss linker     */
-/*   options from your makefile if they are       */
-/*   present.                                     */
-
-/* You can use the following to view section      */
-/* addresses in your .elf file:                   */
-/*   objdump -h file.elf                          */
-/* Please note that empty sections may incorrectly*/
-/* list the lma address as the vma address for    */
-/* some versions of objdump.                      */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-/* SEARCH_DIR(/bin/arm); */
-
-/* The linker script function "var1 += var2;" sometimes    */
-/* reports incorrect values in the *.map file but the      */
-/* actual value it calculates is usually, if not always,   */
-/* correct. If you leave out the ". = ALIGN(4);" at the    */
-/* end of each section then the return value of SIZEOF()   */
-/* is sometimes incorrect and "var1 += var2;" appears to   */
-/* not work as well. "var1 += var2" style functions are    */
-/* avoided below as a result.                              */
-
-/* The linker script MEMORY directive is not used here due    */
-/* to the fact that __text_start is not always a fixed value. */
-
-__ewram_start		=	0x02001000;
-__text_start 		=	0x02004000;
-__eheap_end		=	0x02380000;
-__iwram_start		=	0x00800000;
-__iheap_end		=	0x00804000 - 0x400;
-__sp_usr		=	0x00804000 - 0x140;
-__sp_irq		=	0x00804000 - 0x60;
-__sp_usr_offset		=	__sp_usr - __iwram_start;
-
-SECTIONS
-{
-	. = __text_start;
-  .init :
-  {
-    KEEP (*(.init))
-    . = ALIGN(4);
-  } =0xff
-
-	.plt :
- 	{
-		*(.plt)
-		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-	}
-
-  .text  :   /* ALIGN (4): */
-  {
-    *(EXCLUDE_FILE (*.iwram*) .text)
-    *(.text.*)
-    *(.stub)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-    *(.glue_7)
-    *(.glue_7t)
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-  __text_end = .;
-  .fini           :
-  {
-    KEEP (*(.fini))
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } =0
-
-  .rodata :
-  {
-    *(.rodata)
-    *all.rodata*(*)
-    *(.roda)
-    *(.rodata.*)
-    *(.gnu.linkonce.r*)
-    SORT(CONSTRUCTORS)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-
-  .ctors :
-  {
-    /* gcc uses crtbegin.o to find the start of the constructors, so
-       we make sure it is first.  Because this is a wildcard, it
-       doesn't matter if the user does not actually link against
-       crtbegin.o; the linker won't look for a file to match a
-       wildcard.  The wildcard also means that it doesn't matter which
-       directory crtbegin.o is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-
-  .dtors :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-   .jcr            : { KEEP (*(.jcr)) }
-
-/*  laddr = ADDR(.init) + SIZEOF(.init) +  SIZEOF(.text) + SIZEOF(.fini) + SIZEOF(.rodata) + SIZEOF(.ctors) + SIZEOF(.dtors);
-*/
-  .eh_frame :
-  {
-    KEEP (*(.eh_frame))
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-
-  .gcc_except_table :
-  {
-    *(.gcc_except_table)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0
-  __iwram_lma = .;
-
-  .iwram __iwram_start : AT (__iwram_lma)
-  {
-    __iwram_start = ABSOLUTE(.) ;
-    *(.iwram)
-    *iwram.*(.text)
-    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-
-  __data_lma = __iwram_lma + SIZEOF(.iwram) ;
-  __iwram_end = . ;
-
-  .bss ALIGN(4) :
-  {
-   __bss_start = ABSOLUTE(.);
-   __bss_start__ = ABSOLUTE(.);
-   *(.dynbss)
-   *(.gnu.linkonce.b*)
-   *(COMMON)
-   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
-  }
-
-  __bss_end = . ;
-  __bss_end__ = . ;
-
-  .data ALIGN(4) : AT (__data_lma)
-  {
-    __data_start = ABSOLUTE(.);
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d*)
-    CONSTRUCTORS
-  } = 0xff
-
-  __iwram_overlay_lma = __data_lma + SIZEOF(.data);
-
-  __data_end  =  .;
-  PROVIDE (edata = .);
-  __iwram_overlay_start = . ;
-
-  OVERLAY : NOCROSSREFS AT (__iwram_overlay_lma)
-  {
-     .iwram0 { *(.iwram0) . = ALIGN(4);}
-     .iwram1 { *(.iwram1) . = ALIGN(4);}
-     .iwram2 { *(.iwram2) . = ALIGN(4);}
-     .iwram3 { *(.iwram3) . = ALIGN(4);}
-     .iwram4 { *(.iwram4) . = ALIGN(4);}
-     .iwram5 { *(.iwram5) . = ALIGN(4);}
-     .iwram6 { *(.iwram6) . = ALIGN(4);}
-     .iwram7 { *(.iwram7) . = ALIGN(4);}
-     .iwram8 { *(.iwram8) . = ALIGN(4);}
-     .iwram9 { *(.iwram9) . = ALIGN(4);}
-  } = 0xff
-  __ewram_lma = LOADADDR(.iwram0) + SIZEOF(.iwram0)+SIZEOF(.iwram1)+SIZEOF(.iwram2)+SIZEOF(.iwram3)+SIZEOF(.iwram4)+SIZEOF(.iwram5)+SIZEOF(.iwram6)+SIZEOF(.iwram7)+SIZEOF(.iwram8)+SIZEOF(.iwram9);
-
-  __iwram_overlay_end = . ;
-  __iheap_start = . ;
-
-  .ewram __ewram_start : AT (__ewram_lma)
-  {
-    *(.ewram)
-    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-  } = 0xff
-  __ewram_overlay_lma = __ewram_lma + SIZEOF(.ewram);
-
-	.sbss ALIGN(4):
- 	{
- 		*(.sbss)
- 		. = ALIGN(4);
- 	}
-
-  __ewram_end = . ;
-  __ewram_overlay_start = . ;
-
-  OVERLAY ALIGN(4): NOCROSSREFS AT (__ewram_overlay_lma)
-  {
-     .ewram0 { *(.ewram0) . = ALIGN(4);}
-     .ewram1 { *(.ewram1) . = ALIGN(4);}
-     .ewram2 { *(.ewram2) . = ALIGN(4);}
-     .ewram3 { *(.ewram3) . = ALIGN(4);}
-     .ewram4 { *(.ewram4) . = ALIGN(4);}
-     .ewram5 { *(.ewram5) . = ALIGN(4);}
-     .ewram6 { *(.ewram6) . = ALIGN(4);}
-     .ewram7 { *(.ewram7) . = ALIGN(4);}
-     .ewram8 { *(.ewram8) . = ALIGN(4);}
-     .ewram9 { *(.ewram9) . = ALIGN(4);}
-  } = 0xff
-
-  __pad_lma = LOADADDR(.ewram0) + SIZEOF(.ewram0)+SIZEOF(.ewram1)+SIZEOF(.ewram2)+SIZEOF(.ewram3)+SIZEOF(.ewram4)+SIZEOF(.ewram5)+SIZEOF(.ewram6)+SIZEOF(.ewram7)+SIZEOF(.ewram8)+SIZEOF(.ewram9);
-
-	/* EZF Advance strips trailing 0xff bytes, add a pad section so nothing important is removed */
-	.pad ALIGN(4) : AT (__pad_lma)
-	{
-		LONG(0x52416b64)
-		LONG(0x4d)
-		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
-	} = 0xff
-
-	__ewram_overlay_end = . ;
-	__eheap_start = . ;
-
-	_end = .;
-	__end__ = _end ; /* v1.3 */
-	PROVIDE (end = _end); /* v1.3 */
-
-	/* Stabs debugging sections.  */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	/*	DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to the beginning
-		of the section so we begin them at 0.  */
-	/* DWARF 1 */
-	.debug          0 : { *(.debug) }
-	.line           0 : { *(.line) }
-	/* GNU DWARF 1 extensions */
-	.debug_srcinfo  0 : { *(.debug_srcinfo) }
-	.debug_sfnames  0 : { *(.debug_sfnames) }
-	/* DWARF 1.1 and DWARF 2 */
-	.debug_aranges  0 : { *(.debug_aranges) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	/* DWARF 2 */
-	.debug_info     0 : { *(.debug_info) }
-	.debug_abbrev   0 : { *(.debug_abbrev) }
-	.debug_line     0 : { *(.debug_line) }
-	.debug_frame    0 : { *(.debug_frame) }
-	.debug_str      0 : { *(.debug_str) }
-	.debug_loc      0 : { *(.debug_loc) }
-	.debug_macinfo  0 : { *(.debug_macinfo) }
-	/* SGI/MIPS DWARF 2 extensions */
-	.debug_weaknames 0 : { *(.debug_weaknames) }
-	.debug_funcnames 0 : { *(.debug_funcnames) }
-	.debug_typenames 0 : { *(.debug_typenames) }
-	.debug_varnames  0 : { *(.debug_varnames) }
-	.stack 0x80000 : { _stack = .; *(.stack) }
-	/* These must appear regardless of  .  */
-}
+/* Linker Script Original v1.3 by Jeff Frohwein     */
+/*  v1.0 - Original release                         */
+/*  v1.1 - Added proper .data section support       */
+/*  v1.2 - Added support for c++ & iwram overlays   */
+/*       - Major contributions by Jason Wilkins.    */
+/*  v1.3 - .ewram section now can be used when      */
+/*         compiling for MULTIBOOT mode. This fixes */
+/*         malloc() in DevKitAdvance which depends  */
+/*         on __eheap_start instead of end to define*/
+/*         the starting location of heap space.     */
+/*         External global variable __gba_iwram_heap*/
+/*         support added to allow labels end, _end, */
+/*         & __end__ to point to end of iwram or    */
+/*         the end of ewram.                        */
+/*                                                  */
+/* Additions by WinterMute	                    */
+/* v1.4 - .sbss section added for unitialised       */
+/*        data in ewram                             */
+/* v1.5 - padding section added to stop EZF         */
+/*        stripping important data                  */
+/* Additions by Joat:                               */
+/* v1.6 - Adapted for the DS                        */
+
+/* This file is released into the public domain     */
+/* for commercial or non-commercial use with no     */
+/* restrictions placed upon it.                     */
+
+/* NOTE!!!: This linker script defines the RAM &  */
+/*   ROM start addresses. In order for it to work */
+/*   properly, remove -Ttext and -Tbss linker     */
+/*   options from your makefile if they are       */
+/*   present.                                     */
+
+/* You can use the following to view section      */
+/* addresses in your .elf file:                   */
+/*   objdump -h file.elf                          */
+/* Please note that empty sections may incorrectly*/
+/* list the lma address as the vma address for    */
+/* some versions of objdump.                      */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+/* SEARCH_DIR(/bin/arm); */
+
+/* The linker script function "var1 += var2;" sometimes    */
+/* reports incorrect values in the *.map file but the      */
+/* actual value it calculates is usually, if not always,   */
+/* correct. If you leave out the ". = ALIGN(4);" at the    */
+/* end of each section then the return value of SIZEOF()   */
+/* is sometimes incorrect and "var1 += var2;" appears to   */
+/* not work as well. "var1 += var2" style functions are    */
+/* avoided below as a result.                              */
+
+/* The linker script MEMORY directive is not used here due    */
+/* to the fact that __text_start is not always a fixed value. */
+
+__ewram_start		=	0x02001000;
+__text_start 		=	0x02004000;
+__eheap_end		=	0x02380000;
+__iwram_start		=	0x00800000;
+__iheap_end		=	0x00804000 - 0x400;
+__sp_usr		=	0x00804000 - 0x140;
+__sp_irq		=	0x00804000 - 0x80;
+__sp_svc		=	0x00804000 - 0x40;
+__sp_usr_offset		=	__sp_usr - __iwram_start;
+
+SECTIONS
+{
+	. = __text_start;
+  .init :
+  {
+    KEEP (*(.init))
+    . = ALIGN(4);
+  } =0xff
+
+	.plt :
+ 	{
+		*(.plt)
+		. = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+	}
+
+  .text  :   /* ALIGN (4): */
+  {
+    *(EXCLUDE_FILE (*.iwram*) .text)
+    *(.text.*)
+    *(.stub)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.gnu.linkonce.t*)
+    *(.glue_7)
+    *(.glue_7t)
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+  __text_end = .;
+  .fini           :
+  {
+    KEEP (*(.fini))
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } =0
+
+  .rodata :
+  {
+    *(.rodata)
+    *all.rodata*(*)
+    *(.roda)
+    *(.rodata.*)
+    *(.gnu.linkonce.r*)
+    SORT(CONSTRUCTORS)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+
+  .ctors :
+  {
+    /* gcc uses crtbegin.o to find the start of the constructors, so
+       we make sure it is first.  Because this is a wildcard, it
+       doesn't matter if the user does not actually link against
+       crtbegin.o; the linker won't look for a file to match a
+       wildcard.  The wildcard also means that it doesn't matter which
+       directory crtbegin.o is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+
+  .dtors :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+   .jcr            : { KEEP (*(.jcr)) }
+
+/*  laddr = ADDR(.init) + SIZEOF(.init) +  SIZEOF(.text) + SIZEOF(.fini) + SIZEOF(.rodata) + SIZEOF(.ctors) + SIZEOF(.dtors);
+*/
+  .eh_frame :
+  {
+    KEEP (*(.eh_frame))
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+
+  .gcc_except_table :
+  {
+    *(.gcc_except_table)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0
+  __iwram_lma = .;
+
+  .iwram __iwram_start : AT (__iwram_lma)
+  {
+    __iwram_start = ABSOLUTE(.) ;
+    *(.iwram)
+    *iwram.*(.text)
+    . = ALIGN(4);   /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+
+  __data_lma = __iwram_lma + SIZEOF(.iwram) ;
+  __iwram_end = . ;
+
+  .bss ALIGN(4) :
+  {
+   __bss_start = ABSOLUTE(.);
+   __bss_start__ = ABSOLUTE(.);
+   *(.dynbss)
+   *(.gnu.linkonce.b*)
+   *(COMMON)
+   . = ALIGN(4);    /* REQUIRED. LD is flaky without it. */
+  }
+
+  __bss_end = . ;
+  __bss_end__ = . ;
+
+  .data ALIGN(4) : AT (__data_lma)
+  {
+    __data_start = ABSOLUTE(.);
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d*)
+    CONSTRUCTORS
+  } = 0xff
+
+  __iwram_overlay_lma = __data_lma + SIZEOF(.data);
+
+  __data_end  =  .;
+  PROVIDE (edata = .);
+  __iwram_overlay_start = . ;
+
+  OVERLAY : NOCROSSREFS AT (__iwram_overlay_lma)
+  {
+     .iwram0 { *(.iwram0) . = ALIGN(4);}
+     .iwram1 { *(.iwram1) . = ALIGN(4);}
+     .iwram2 { *(.iwram2) . = ALIGN(4);}
+     .iwram3 { *(.iwram3) . = ALIGN(4);}
+     .iwram4 { *(.iwram4) . = ALIGN(4);}
+     .iwram5 { *(.iwram5) . = ALIGN(4);}
+     .iwram6 { *(.iwram6) . = ALIGN(4);}
+     .iwram7 { *(.iwram7) . = ALIGN(4);}
+     .iwram8 { *(.iwram8) . = ALIGN(4);}
+     .iwram9 { *(.iwram9) . = ALIGN(4);}
+  } = 0xff
+  __ewram_lma = LOADADDR(.iwram0) + SIZEOF(.iwram0)+SIZEOF(.iwram1)+SIZEOF(.iwram2)+SIZEOF(.iwram3)+SIZEOF(.iwram4)+SIZEOF(.iwram5)+SIZEOF(.iwram6)+SIZEOF(.iwram7)+SIZEOF(.iwram8)+SIZEOF(.iwram9);
+
+  __iwram_overlay_end = . ;
+  __iheap_start = . ;
+
+  .ewram __ewram_start : AT (__ewram_lma)
+  {
+    *(.ewram)
+    . = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+  } = 0xff
+  __ewram_overlay_lma = __ewram_lma + SIZEOF(.ewram);
+
+	.sbss ALIGN(4):
+ 	{
+ 		*(.sbss)
+ 		. = ALIGN(4);
+ 	}
+
+  __ewram_end = . ;
+  __ewram_overlay_start = . ;
+
+  OVERLAY ALIGN(4): NOCROSSREFS AT (__ewram_overlay_lma)
+  {
+     .ewram0 { *(.ewram0) . = ALIGN(4);}
+     .ewram1 { *(.ewram1) . = ALIGN(4);}
+     .ewram2 { *(.ewram2) . = ALIGN(4);}
+     .ewram3 { *(.ewram3) . = ALIGN(4);}
+     .ewram4 { *(.ewram4) . = ALIGN(4);}
+     .ewram5 { *(.ewram5) . = ALIGN(4);}
+     .ewram6 { *(.ewram6) . = ALIGN(4);}
+     .ewram7 { *(.ewram7) . = ALIGN(4);}
+     .ewram8 { *(.ewram8) . = ALIGN(4);}
+     .ewram9 { *(.ewram9) . = ALIGN(4);}
+  } = 0xff
+
+  __pad_lma = LOADADDR(.ewram0) + SIZEOF(.ewram0)+SIZEOF(.ewram1)+SIZEOF(.ewram2)+SIZEOF(.ewram3)+SIZEOF(.ewram4)+SIZEOF(.ewram5)+SIZEOF(.ewram6)+SIZEOF(.ewram7)+SIZEOF(.ewram8)+SIZEOF(.ewram9);
+
+	/* EZF Advance strips trailing 0xff bytes, add a pad section so nothing important is removed */
+	.pad ALIGN(4) : AT (__pad_lma)
+	{
+		LONG(0x52416b64)
+		LONG(0x4d)
+		. = ALIGN(4);  /* REQUIRED. LD is flaky without it. */
+	} = 0xff
+
+	__ewram_overlay_end = . ;
+	__eheap_start = . ;
+
+	_end = .;
+	__end__ = _end ; /* v1.3 */
+	PROVIDE (end = _end); /* v1.3 */
+
+	/* Stabs debugging sections.  */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	/*	DWARF debug sections.
+		Symbols in the DWARF debugging sections are relative to the beginning
+		of the section so we begin them at 0.  */
+	/* DWARF 1 */
+	.debug          0 : { *(.debug) }
+	.line           0 : { *(.line) }
+	/* GNU DWARF 1 extensions */
+	.debug_srcinfo  0 : { *(.debug_srcinfo) }
+	.debug_sfnames  0 : { *(.debug_sfnames) }
+	/* DWARF 1.1 and DWARF 2 */
+	.debug_aranges  0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	/* DWARF 2 */
+	.debug_info     0 : { *(.debug_info) }
+	.debug_abbrev   0 : { *(.debug_abbrev) }
+	.debug_line     0 : { *(.debug_line) }
+	.debug_frame    0 : { *(.debug_frame) }
+	.debug_str      0 : { *(.debug_str) }
+	.debug_loc      0 : { *(.debug_loc) }
+	.debug_macinfo  0 : { *(.debug_macinfo) }
+	/* SGI/MIPS DWARF 2 extensions */
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames  0 : { *(.debug_varnames) }
+	.stack 0x80000 : { _stack = .; *(.stack) }
+	/* These must appear regardless of  .  */
+}
diff --git a/dka-crtls/ds_arm9.specs b/dka-crtls/ds_arm9.specs
index 8f1d5bf..016f977 100644
--- a/dka-crtls/ds_arm9.specs
+++ b/dka-crtls/ds_arm9.specs
@@ -1,8 +1,8 @@
-%rename link                old_link
-
-*link:
-%(old_link) -T ds_arm9.ld%s
-
-*startfile:
-ds_arm9_crt0%O%s crti%O%s crtbegin%O%s
-
+%rename link                old_link
+
+*link:
+%(old_link) -T ds_arm9.ld%s
+
+*startfile:
+ds_arm9_crt0%O%s crti%O%s crtbegin%O%s
+
diff --git a/dka-crtls/ds_arm9_crt0.S b/dka-crtls/ds_arm9_crt0.S
index 609c7cd..aefd57b 100644
--- a/dka-crtls/ds_arm9_crt0.S
+++ b/dka-crtls/ds_arm9_crt0.S
@@ -1,143 +1,147 @@
-.section ".init"
-.global _start
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-.align	4
-.arm
-
-_start:
-		mov	r0, #0x04000000			@ IME = 0;
-		add	r0, r0, #0x208
-		strh	r0, [r0]
-
-		ldr	r1, =0x00002078			@ disable DTCM and protection unit
-		mcr	p15, 0, r1, c1, c0
-
-		ldr	r0, =0x0080000A
-		mcr	p15, 0, r0, c9, c1		@ TCM base = 0x00800*4096, size = 16 KB
-		mrc	p15, 0, r0, c1, c0		@ throw-away read of cp15.c1
-		orr	r1, r1, #0x10000
-		mcr	p15, 0, r1, c1, c0		@ cp15.c1 = 0x00012078;
-
-		mov	r0, #0x12			@ Switch to IRQ Mode
-		msr	cpsr, r0
-		ldr	sp, =__sp_irq			@ Set IRQ stack
-
-		mov	r0, #0x1F			@ Switch to System Mode
-		msr	cpsr, r0
-		ldr	sp, =__sp_usr			@ Set user stack
-
-		ldr	r0, =__bss_start		@ Clear BSS section to 0x00
-		ldr	r1, =__bss_end
-		sub	r1, r1, r0
-		bl	ClearMem
-
-		ldr	r1, =__data_lma			@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__data_start
-		ldr	r4, =__data_end
-		bl	CopyMemCheck
-
-		ldr	r1, =__iwram_lma		@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__iwram_start
-		ldr	r4, =__iwram_end
-		bl	CopyMemCheck
-
-		ldr	r2, =__load_stop_iwram0		@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
-		ldr	r1, =__load_start_iwram0
-		subs	r3, r2, r1			@ Is there any data to copy?
-		beq	CIW0Skip			@ no
-		ldr	r2, =__iwram_overlay_start
-		bl	CopyMem
-CIW0Skip:
-		ldr	r1, =__ewram_lma		@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__ewram_start
-		ldr	r4, =__ewram_end
-		bl	CopyMemCheck
-
-		ldr	r2, =__load_stop_ewram0	@ 	@ Copy external work ram overlay 0 (ewram0 section) from LMA to VMA (ROM to RAM)
-		ldr	r1, =__load_start_ewram0
-		subs	r3, r2, r1			@ Is there any data to copy?
-		beq	CEW0Skip			@ no
-		ldr	r2, =__ewram_overlay_start
-		bl	CopyMem
-CEW0Skip:
-		ldr	r1, =fake_heap_end		@ set heap end
-		ldr	r0, =__eheap_end
-		str	r0, [r1]
-	
-		ldr	r3, =_init			@ global constructors
-		bl	_call_via_r3
-
-		mov	r0, #0				@ int argc
-		mov	r1, #0				@ char *argv[]
-		ldr	r3, =main
-		bl	_call_via_r3			@ jump to user code
-		
-		@ If the user ever returns, go to an infinte loop
-		ldr	r0, =ILoop
-		ldr	r0, [r0]
-		ldr	r1, =0x027FFE78
-		str	r0, [r1]
-		bx	r1
-ILoop:		b	ILoop
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-ClearMem:	mov	r2, #3			@ Round down to nearest word boundary
-		add	r1, r1, r2		@ Shouldn't be needed
-		bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
-		bxeq	lr			@ Quit if copy size is 0
-
-		mov	r2, #0
-ClrLoop:	stmia	r0!, {r2}
-		subs	r1, r1, #4
-		bne	ClrLoop
-
-		bx	lr
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-CopyMemCheck:
-		sub	r3, r4, r2		@ Is there any data to copy?
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-CopyMem:	mov	r0, #3			@ These commands are used in cases where
-		add	r3, r3, r0		@ the length is not a multiple of 4,
-		bics	r3, r3, r0		@ even though it should be.
-		bxeq	lr			@ Length is zero, so exit
-
-CIDLoop:	ldmia	r1!, {r0}
-		stmia	r2!, {r0}
-		subs	r3, r3, #4
-		bne	CIDLoop
-
-		bx	lr
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-.align
-.pool
-
-.end
+.section ".init"
+.global _start
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+.align	4
+.arm
+
+_start:
+		mov	r0, #0x04000000			@ IME = 0;
+		add	r0, r0, #0x208
+		strh	r0, [r0]
+
+		ldr	r1, =0x00002078			@ disable DTCM and protection unit
+		mcr	p15, 0, r1, c1, c0
+
+		ldr	r0, =0x0080000A
+		mcr	p15, 0, r0, c9, c1		@ TCM base = 0x00800*4096, size = 16 KB
+		mrc	p15, 0, r0, c1, c0		@ throw-away read of cp15.c1
+		orr	r1, r1, #0x10000
+		mcr	p15, 0, r1, c1, c0		@ cp15.c1 = 0x00012078;
+
+		mov	r0, #0x12			@ Switch to IRQ Mode
+		msr	cpsr, r0
+		ldr	sp, =__sp_irq			@ Set IRQ stack
+
+		mov	r0, #0x13			@ Switch to SVC Mode
+		msr	cpsr, r0
+		ldr	sp, =__sp_svc			@ Set SVC stack
+
+		mov	r0, #0x1F			@ Switch to System Mode
+		msr	cpsr, r0
+		ldr	sp, =__sp_usr			@ Set user stack
+
+		ldr	r0, =__bss_start		@ Clear BSS section to 0x00
+		ldr	r1, =__bss_end
+		sub	r1, r1, r0
+		bl	ClearMem
+
+		ldr	r1, =__data_lma			@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__data_start
+		ldr	r4, =__data_end
+		bl	CopyMemCheck
+
+		ldr	r1, =__iwram_lma		@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__iwram_start
+		ldr	r4, =__iwram_end
+		bl	CopyMemCheck
+
+		ldr	r2, =__load_stop_iwram0		@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
+		ldr	r1, =__load_start_iwram0
+		subs	r3, r2, r1			@ Is there any data to copy?
+		beq	CIW0Skip			@ no
+		ldr	r2, =__iwram_overlay_start
+		bl	CopyMem
+CIW0Skip:
+		ldr	r1, =__ewram_lma		@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__ewram_start
+		ldr	r4, =__ewram_end
+		bl	CopyMemCheck
+
+		ldr	r2, =__load_stop_ewram0	@ 	@ Copy external work ram overlay 0 (ewram0 section) from LMA to VMA (ROM to RAM)
+		ldr	r1, =__load_start_ewram0
+		subs	r3, r2, r1			@ Is there any data to copy?
+		beq	CEW0Skip			@ no
+		ldr	r2, =__ewram_overlay_start
+		bl	CopyMem
+CEW0Skip:
+		ldr	r1, =fake_heap_end		@ set heap end
+		ldr	r0, =__eheap_end
+		str	r0, [r1]
+	
+		ldr	r3, =_init			@ global constructors
+		bl	_call_via_r3
+
+		mov	r0, #0				@ int argc
+		mov	r1, #0				@ char *argv[]
+		ldr	r3, =main
+		bl	_call_via_r3			@ jump to user code
+		
+		@ If the user ever returns, go to an infinte loop
+		ldr	r0, =ILoop
+		ldr	r0, [r0]
+		ldr	r1, =0x027FFE78
+		str	r0, [r1]
+		bx	r1
+ILoop:		b	ILoop
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Clear memory to 0x00 if length != 0
+@  r0 = Start Address
+@  r1 = Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+ClearMem:	mov	r2, #3			@ Round down to nearest word boundary
+		add	r1, r1, r2		@ Shouldn't be needed
+		bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
+		bxeq	lr			@ Quit if copy size is 0
+
+		mov	r2, #0
+ClrLoop:	stmia	r0!, {r2}
+		subs	r1, r1, #4
+		bne	ClrLoop
+
+		bx	lr
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Copy memory if length	!= 0
+@  r1 = Source Address
+@  r2 = Dest Address
+@  r4 = Dest Address + Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+CopyMemCheck:
+		sub	r3, r4, r2		@ Is there any data to copy?
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Copy memory
+@  r1 = Source Address
+@  r2 = Dest Address
+@  r3 = Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+CopyMem:	mov	r0, #3			@ These commands are used in cases where
+		add	r3, r3, r0		@ the length is not a multiple of 4,
+		bics	r3, r3, r0		@ even though it should be.
+		bxeq	lr			@ Length is zero, so exit
+
+CIDLoop:	ldmia	r1!, {r0}
+		stmia	r2!, {r0}
+		subs	r3, r3, #4
+		bne	CIDLoop
+
+		bx	lr
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+.align
+.pool
+
+.end
diff --git a/dka-crtls/ds_cart_crt0.S b/dka-crtls/ds_cart_crt0.S
index ffeeb0c..61266ca 100644
--- a/dka-crtls/ds_cart_crt0.S
+++ b/dka-crtls/ds_cart_crt0.S
@@ -1,173 +1,173 @@
-.section ".init"
-.global _start
-.align
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-.arm
-
-_start:
-	b	rom_header_end
-
-	.fill   156,1,0					@ Nintendo Logo Character Data (8000004h)
-	.fill	16,1,0					@ Game Title
-	.byte   0x30,0x31				@ Maker Code (80000B0h)
-	.byte   0x96					@ Fixed Value (80000B2h)
-	.byte   0x00					@ Main Unit Code (80000B3h)
-	.byte   0x00					@ Device Type (80000B4h)
-	.fill	7,1,0					@ unused
-	.byte	0x00					@ Software Version No (80000BCh)
-	.byte	0xf0					@ Complement Check (80000BDh)
-	.byte	0x00,0x00    				@ Checksum (80000BEh)
-
-rom_header_end:
-	b	start_vector				@ This branch must be here for proper
-							@ positioning of the following header.
-
-	.GLOBAL	__boot_method, __slave_number
-__boot_method:
-	.byte   0					@ boot method (0=ROM boot, 3=Multiplay boot)
-__slave_number:
-	.byte   0					@ slave # (1=slave#1, 2=slave#2, 3=slave#3)
-
-	.byte   0 					@ reserved
-	.byte   0 					@ reserved
-	.word   0    					@ reserved
-	.word   0					@ reserved
-	.word   0    					@ reserved
-	.word   0    					@ reserved
-	.word   0    					@ reserved
-	.word   0    					@ reserved
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-.align	4
-.arm
-
-start_vector:
-		mov	r0, #0x04000000			@ IME = 0;
-		add	r0, r0, #0x208
-		strh	r0, [r0]
-
-		mov	r0, #0x12			@ Switch to IRQ Mode
-		msr	cpsr, r0
-		ldr	sp, =__sp_irq			@ Set IRQ stack
-		mov	r0, #0x1F			@ Switch to System Mode
-		msr	cpsr, r0
-		ldr	sp, =__sp_usr			@ Set user stack
-
-		mov	r1, #0x42
-		strb	r1, [r7], #1
-		mov	r1, #0x35
-		strb	r1, [r7], #1
-		mov	r1, #0x2B
-		strb	r1, [r7], #1
-		mov	r1, #0x2B
-		strb	r1, [r7], #1
-
-		ldr	r0, =__bss_start		@ Clear BSS section to 0x00
-		ldr	r1, =__bss_end
-		sub	r1, r1, r0
-		bl	ClearMem
-
-		ldr	r1, =__data_lma			@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__data_start
-		ldr	r4, =__data_end
-		bl	CopyMemChk
-
-		ldr	r1, =__iwram_lma		@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__iwram_start
-		ldr	r4, =__iwram_end
-		bl	CopyMemChk
-
-		ldr	r2, =__load_stop_iwram0		@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
-		ldr	r1, =__load_start_iwram0
-		subs	r3, r2, r1			@ Is there any data to copy?
-		beq	CIW0Skip			@ no
-		ldr	r2, =__iwram_overlay_start
-		bl	CopyMem
-CIW0Skip:
-		ldr	r1, =__ewram_lma		@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
-		ldr	r2, =__ewram_start
-		ldr	r4, =__ewram_end
-		bl	CopyMemChk
-
-		ldr	r2, =__load_stop_ewram0	@ 	@ Copy external work ram overlay 0 (ewram0 section) from LMA to VMA (ROM to RAM)
-		ldr	r1, =__load_start_ewram0
-		subs	r3, r2, r1			@ Is there any data to copy?
-		beq	CEW0Skip			@ no
-		ldr	r2, =__ewram_overlay_start
-		bl	CopyMem
-CEW0Skip:
-		ldr	r1, =fake_heap_end		@ set heap end
-		ldr	r0, =__eheap_end
-		str	r0, [r1]
-	
-		ldr	r3, =_init			@ global constructors
-		bl	_call_via_r3
-
-		mov	r0, #0				@ int argc
-		mov	r1, #0				@ char *argv[]
-		ldr	r3, =main
-		bl	_call_via_r3			@ jump to user code
-
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Clear memory to 0x00 if length != 0
-@  r0 = Start Address
-@  r1 = Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-ClearMem:	mov	r2, #3			@ Round down to nearest word boundary
-		add	r1, r1, r2		@ Shouldn't be needed
-		bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
-		bxeq	lr			@ Quit if copy size is 0
-
-		mov	r2, #0
-ClrLoop:	stmia	r0!, {r2}
-		subs	r1, r1, #4
-		bne	ClrLoop
-
-		bx	lr
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Copy memory if length	!= 0
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r4 = Dest Address + Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-CopyMemChk:	sub	r3, r4, r2		@ Is there any data to copy?
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-@
-@ Copy memory
-@  r1 = Source Address
-@  r2 = Dest Address
-@  r3 = Length
-@
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-CopyMem:	mov	r0, #3			@ These commands are used in cases where
-		add	r3, r3, r0		@ the length is not a multiple of 4,
-		bics	r3, r3, r0		@ even though it should be.
-		bxeq	lr			@ Length is zero so exit
-
-CIDLoop:	ldmia	r1!, {r0}
-		stmia	r2!, {r0}
-		subs	r3, r3, #4
-		bne	CIDLoop
-
-		bx	lr
-
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-.align
-.pool
-
-.end
-
+.section ".init"
+.global _start
+.align
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+.arm
+
+_start:
+	b	rom_header_end
+
+	.fill   156,1,0					@ Nintendo Logo Character Data (8000004h)
+	.fill	16,1,0					@ Game Title
+	.byte   0x30,0x31				@ Maker Code (80000B0h)
+	.byte   0x96					@ Fixed Value (80000B2h)
+	.byte   0x00					@ Main Unit Code (80000B3h)
+	.byte   0x00					@ Device Type (80000B4h)
+	.fill	7,1,0					@ unused
+	.byte	0x00					@ Software Version No (80000BCh)
+	.byte	0xf0					@ Complement Check (80000BDh)
+	.byte	0x00,0x00    				@ Checksum (80000BEh)
+
+rom_header_end:
+	b	start_vector				@ This branch must be here for proper
+							@ positioning of the following header.
+
+	.GLOBAL	__boot_method, __slave_number
+__boot_method:
+	.byte   0					@ boot method (0=ROM boot, 3=Multiplay boot)
+__slave_number:
+	.byte   0					@ slave # (1=slave#1, 2=slave#2, 3=slave#3)
+
+	.byte   0 					@ reserved
+	.byte   0 					@ reserved
+	.word   0    					@ reserved
+	.word   0					@ reserved
+	.word   0    					@ reserved
+	.word   0    					@ reserved
+	.word   0    					@ reserved
+	.word   0    					@ reserved
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+.align	4
+.arm
+
+start_vector:
+		mov	r0, #0x04000000			@ IME = 0;
+		add	r0, r0, #0x208
+		strh	r0, [r0]
+
+		mov	r0, #0x12			@ Switch to IRQ Mode
+		msr	cpsr, r0
+		ldr	sp, =__sp_irq			@ Set IRQ stack
+		mov	r0, #0x1F			@ Switch to System Mode
+		msr	cpsr, r0
+		ldr	sp, =__sp_usr			@ Set user stack
+
+		mov	r1, #0x42
+		strb	r1, [r7], #1
+		mov	r1, #0x35
+		strb	r1, [r7], #1
+		mov	r1, #0x2B
+		strb	r1, [r7], #1
+		mov	r1, #0x2B
+		strb	r1, [r7], #1
+
+		ldr	r0, =__bss_start		@ Clear BSS section to 0x00
+		ldr	r1, =__bss_end
+		sub	r1, r1, r0
+		bl	ClearMem
+
+		ldr	r1, =__data_lma			@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__data_start
+		ldr	r4, =__data_end
+		bl	CopyMemChk
+
+		ldr	r1, =__iwram_lma		@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__iwram_start
+		ldr	r4, =__iwram_end
+		bl	CopyMemChk
+
+		ldr	r2, =__load_stop_iwram0		@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
+		ldr	r1, =__load_start_iwram0
+		subs	r3, r2, r1			@ Is there any data to copy?
+		beq	CIW0Skip			@ no
+		ldr	r2, =__iwram_overlay_start
+		bl	CopyMem
+CIW0Skip:
+		ldr	r1, =__ewram_lma		@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
+		ldr	r2, =__ewram_start
+		ldr	r4, =__ewram_end
+		bl	CopyMemChk
+
+		ldr	r2, =__load_stop_ewram0	@ 	@ Copy external work ram overlay 0 (ewram0 section) from LMA to VMA (ROM to RAM)
+		ldr	r1, =__load_start_ewram0
+		subs	r3, r2, r1			@ Is there any data to copy?
+		beq	CEW0Skip			@ no
+		ldr	r2, =__ewram_overlay_start
+		bl	CopyMem
+CEW0Skip:
+		ldr	r1, =fake_heap_end		@ set heap end
+		ldr	r0, =__eheap_end
+		str	r0, [r1]
+	
+		ldr	r3, =_init			@ global constructors
+		bl	_call_via_r3
+
+		mov	r0, #0				@ int argc
+		mov	r1, #0				@ char *argv[]
+		ldr	r3, =main
+		bl	_call_via_r3			@ jump to user code
+
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Clear memory to 0x00 if length != 0
+@  r0 = Start Address
+@  r1 = Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+ClearMem:	mov	r2, #3			@ Round down to nearest word boundary
+		add	r1, r1, r2		@ Shouldn't be needed
+		bics	r1, r1, r2		@ Clear 2 LSB (and set Z)
+		bxeq	lr			@ Quit if copy size is 0
+
+		mov	r2, #0
+ClrLoop:	stmia	r0!, {r2}
+		subs	r1, r1, #4
+		bne	ClrLoop
+
+		bx	lr
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Copy memory if length	!= 0
+@  r1 = Source Address
+@  r2 = Dest Address
+@  r4 = Dest Address + Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+CopyMemChk:	sub	r3, r4, r2		@ Is there any data to copy?
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@
+@ Copy memory
+@  r1 = Source Address
+@  r2 = Dest Address
+@  r3 = Length
+@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+CopyMem:	mov	r0, #3			@ These commands are used in cases where
+		add	r3, r3, r0		@ the length is not a multiple of 4,
+		bics	r3, r3, r0		@ even though it should be.
+		bxeq	lr			@ Length is zero so exit
+
+CIDLoop:	ldmia	r1!, {r0}
+		stmia	r2!, {r0}
+		subs	r3, r3, #4
+		bne	CIDLoop
+
+		bx	lr
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+.align
+.pool
+
+.end
+