From 43b11c8778d1dce4a62e1d3f8b4cc3ea95835554 Mon Sep 17 00:00:00 2001 From: a5a845f95bba57bc03c1a6bfabfbca25c2de8e01 Date: Tue, 16 Mar 2021 00:48:47 +0000 Subject: [PATCH] doc: minor update to bio2-sub-io-turntable-bypass-cable --- doc/hardware/bio2-sub-io-turntable-bypass-cable.md | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/doc/hardware/bio2-sub-io-turntable-bypass-cable.md b/doc/hardware/bio2-sub-io-turntable-bypass-cable.md index 92d41ec..1273735 100644 --- a/doc/hardware/bio2-sub-io-turntable-bypass-cable.md +++ b/doc/hardware/bio2-sub-io-turntable-bypass-cable.md @@ -1,14 +1,15 @@ # BIO2 sub IO turntable bypass cable -If you upgraded a C02/IO2 wired cabinet, the turntables are connected to the +If you upgraded a C02 wired cabinet, the turntables are connected to the sub IO via a serial line that goes to another sub IO behind the front panel next to the 16seg display. This introduces additional latency as the input data needs to pass through multiple systems/PCBs until it reaches the game. This can be reduced by using a so-called "bypass" cable, that connects the -turntables directly to the BIO2 sub IO board reducing latency significantly. +turntables directly to the BIO2 sub IO board by emulating the wiring of a +D01 cabinet, reducing latency significantly. -This cable could be ordered with any IIDX upgrade kit including the BIO sub IO -board but can also be easily created from scratch. +This cable could be ordered with the IIDX Rootage upgrade kit but can also +be easily created from scratch. ## Parts * Some wires @@ -51,4 +52,4 @@ Pins of the two connectors need to be connected like this: | 5 | 5 | | 6 | 4 | | 7 | 8 | -| 8 | 8 | \ No newline at end of file +| 8 | 8 |