add HAVE_ENDPOINTVOLUME_H, HAVE_MMDEVICEAPI_H and HAVE_AUDIOCLIENT_H
in SDL_config.h.in, SDL_config.h.cmake, SDL_config_windows.h, and in
SDL_config_winrt.h.
This isn't complete, but is enough to run testsprite2. It's currently
Mac-only; with a little work to figure out how to properly glue in a Metal
layer to a UIView, this will likely work on iOS, too.
This is only wired up to the configure script right now, and disabled by
default. CMake and Xcode still need their bits filled in as appropriate.
XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout
was WinRT, which still needed it as its primary audio target until the WASAPI
code code be made to work.
The support matrix now looks like:
WinXP: directsound by default, winmm as a fallback for buggy drivers.
Vista+: WASAPI (directsound and winmm as fallbacks for debugging).
WinRT: WASAPI
Simon Hug
When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug.
The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros.
It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config.
And there's an additional error message for when ftell fails.
Ozkan Sezer
HAVE_LIBSAMPLERATE_H is depending on HAVE_LIBC in current config.h.in:
it shouldn't be. HAVE_LIBUDEV_H, HAVE_DBUS_DBUS_H, HAVE_IBUS_IBUS_H,
HAVE_FCITX_FRONTEND_H, and HAVE_ALTIVEC_H have the same situation too.
I suggest something like the following, which moves them out of the
HAVE_LIBC confinement and also moves the windows dx header stuff along
side them. (Not ideal, but a bit cleaner I think.)
Ozkan Sezer
Cmake checks for float.h, but configure does not: the attached patch
adds float.h to checked headers in configury, and it adds the missing
HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in.
In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H
as 1, where I know that it's true.
sfalexrog
Android haptic code was not added to CMakeLists.txt, leading to build failures when targeting Android platform.
Attached patch adds Android haptic driver to source sets and adds configuration parameter to SDL_config.h.cmake.
manuel.montezelo
Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015
--------------------------------------------------------
Package: libsdl2-2.0-0
Version: 2.0.0+dfsg1-3
Severity: normal
Tags: patch
I have occasional crashes here caused by the X11 backend of SDL2. It seems to
be caused by the X11_Pending function trying to add a high number (> 1024)
file descriptor to a fd_set before doing a select on it to avoid busy waiting
on X11 events. This causes a buffer overflow because the file descriptor is
larger (or equal) than the limit FD_SETSIZE.
Attached is a possible workaround patch.
Please also keep in mind that fd_set are also used in following files which
may have similar problems.
src/audio/bsd/SDL_bsdaudio.c
src/audio/paudio/SDL_paudio.c
src/audio/qsa/SDL_qsa_audio.c
src/audio/sun/SDL_sunaudio.c
src/joystick/linux/SDL_sysjoystick.c
--------------------------------------------------------
On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote:
> I have occasional crashes here caused by the X11 backend of SDL2. It seems
> to be caused by the X11_Pending function trying to add a high number (>
> 1024) file descriptor to a fd_set before doing a select on it to avoid busy
> waiting on X11 events. This causes a buffer overflow because the file
> descriptor is larger (or equal) than the limit FD_SETSIZE.
I personally experienced this problem while hacking on the python bindings
package for SDL2 [1] (while doing make runtest). But it easier to reproduce in
a smaller, synthetic testcase.
Juha Niemimä
On AmigaOS 4 platform with Newlib 'C' library, there is a problem with failing fseeko64. This seemed to be caused by using fopen instead of fopen64.
Manuel
The attached patch adds support for KMS/DRM context graphics.
It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation.
Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition.
X86 systems use KMS right away in every current GNU/Linux system.
Simple build instructions:
$./autogen.sh
$./configure --enable-video-kmsdrm
$make
Ozkan Sezer
(In reply to Ryan C. Gordon from comment #9)
> I've put this patch in as https://hg.libsdl.org/SDL/rev/117d4ce1390e ...can
> you verify this works on the latest MinGW?
>
> Thanks,
> --ryan.
This patch is wrong: the structure in question has nothing to do with any
gcc version in use. I suggest reverting this adding a conigury check for
it, instead. Something like the following should do it: (configure needs
regenerating.)
Kai Sterker
SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings.
As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
joe.gsoc16
I recently looked into Unicode support in SDL2 and realized that
SDL_TEXTEDITING doesn't get triggered at all (Japanese IME).
According to others on IRC it works fine on Windows/Mac but not
for me on (arch)Linux.
When compiling SDL with autotools, IBus support is enabled by
default but not so with CMake.
I never used CMake before but got it working and also included
that pkg-config determines flags for dbus (FIXME in CMakeLists).
This was the only thing that made SDL_config.h generate differently between
32 and 64-bit versions of Linux, so instead we force a function cast in our
X11 code to match our dynamic loader version, which removes the compile error
on some machines that prompted this test in the first place.
Xlib never wrote to this data, so if you're on an older Xlib where this param
wasn't const, your data should still be intact when we force the caller to
think it was actually const after all.
Fixes Bugzilla #1893.
With this commit, you can compile SDL2 with Emscripten
( http://emscripten.org/ ), and make your SDL-based C/C++ program
into a web app.
This port was due to the efforts of several people, including: Charlie Birks,
Sathyanarayanan Gunasekaran, Jukka Jylänki, Alon Zakai, Edward Rudd,
Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)
Tobias Himmer
this patch adds a check to the CMake build script to detect whether the VideoCore API is available.
If it is found, it enables SDL_VIDEO_DRIVER_RPI and will also add the needed include/library directory flags to CMAKE_C_FLAGS so the subsequent check for GLES succeeds in picking up the headers.
Seems to work fine on Raspbian.
binarycrusader
Since changeset 358696c354a8, SDL 2.0 has been broken on Solaris when compiling with the Solaris Studio compiler (which uses the pthread implementation of SDL_AtomicLock).
Notably, it gets stuck at the MemoryBarrierRelease in SDL_GetErrBuf:
6585 # 218
6586 if (!tls_errbuf && !tls_being_created) {
6587 SDL_AtomicLock_REAL ( & tls_lock );
6588 if (!tls_errbuf) {
6589 SDL_TLSID slot;
6590 tls_being_created = SDL_TRUE;
6591 slot = SDL_TLSCreate_REAL ( );
6592 tls_being_created = SDL_FALSE;
6593 { SDL_SpinLock _tmp = 0 ; SDL_AtomicLock_REAL ( & _tmp ) ; SDL_AtomicUnlock_REAL ( & _tmp ) ; };
^^^ loops forever above
6594 tls_errbuf = slot;
6595 }
6596 SDL_AtomicUnlock_REAL ( & tls_lock );
6597 }
Running: testthread
(process id 28926)
^Cdbx: warning: Interrupt ignored but forwarded to child.
signal INT (Interrupt) in __nanosleep at 0xfe52a875
0xfe52a875: __nanosleep+0x0015: jae __nanosleep+0x23 [ 0xfe52a883, .+0xe ]
Current function is SDL_Delay_REAL
204 was_error = nanosleep(&tv, &elapsed);
(dbx) where
[1] __nanosleep(0xfeffe848, 0xfeffe850, 0xfe75a5ac, 0xfe5169d8), at 0xfe52a875
[2] nanosleep(0xfeffe848, 0xfeffe850), at 0xfe516a3b
=>[3] SDL_Delay_REAL(ms = 0), line 204 in "SDL_systimer.c"
[4] SDL_AtomicLock_REAL(lock = 0xfeffe88c), line 104 in "SDL_spinlock.c"
[5] SDL_GetErrBuf(), line 225 in "SDL_thread.c"
[6] SDL_ClearError_REAL(), line 216 in "SDL_error.c"
[7] SDL_InitSubSystem_REAL(flags = 0), line 116 in "SDL.c"
[8] SDL_Init_REAL(flags = 0), line 244 in "SDL.c"
[9] SDL_Init(a = 0), line 89 in "SDL_dynapi_procs.h"
[10] main(argc = 1, argv = 0xfeffe948), line 65 in "testthread.c"
As far as I can tell, this is because pthread_spin_trylock() always returns EBUSY for this particular lock; since it works in other places, I'm suspicious.
Different Solaris Studio compiler versions seem to make no difference.
I've verified this is broken on Linux as well if SDL_spinlock.c is modified to use the pthread implementation.
This appears to be because pthread_spin_init() and pthread_spin_destroy() are not used with the locks as required.
