mirror of
https://github.com/skogaby/KFChickenShim.git
synced 2026-09-08 18:45:18 -05:00
274 lines
59 KiB
Plaintext
274 lines
59 KiB
Plaintext
EESchema-DOCLIB Version 2.0
|
|
#
|
|
$CMP BUTTON-CONDUCTIVESMD
|
|
D Conductive Button Used with rubber key pads on the <a href="https://www.sparkfun.com/products/retired/8602">Nordic Key FOB</a>. This one was designed and proven to work with the <a href="https://www.sparkfun.com/products/retired/9377">PolyCase Key FOB enclosures</a>. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/retired/8602">Nordic Fob</a> (WRL-08602)</li></ul>
|
|
K PROD_ID:XXX-00000
|
|
$ENDCMP
|
|
#
|
|
$CMP BUTTON-MAGNETIC-SNAP18MM
|
|
D Magnetic Metal Snaps 18mm diameter snaps that couple together very strongly (must be pried apart), rotate freely on the axis, and are electrically conductive. Overall connection resistance is less than 200 miliOhm. Snaps will couple when closer than 10mm. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/8682">Magnetic Snap 18mm</a> (WRL-08682)</li></ul>
|
|
K PROD_ID:DEV-08682
|
|
$ENDCMP
|
|
#
|
|
$CMP BUTTONPAD-2X2-LED
|
|
D 2x2 Button Pad w/ Single LEDs Layout and schematic for 2x2 button pad with single-color LEDs under each button. For use with the <a href="https://www.sparkfun.com/products/7836">Button Pad 2x2 - LED Compatible</a> and <a href="https://www.sparkfun.com/products/8746">Button Pad 2x2 Top Bezel</a>. Any <a href="https://www.sparkfun.com/categories/172">single-color 5mm LED</a> should be compatible. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li><li><a href="https://www.sparkfun.com/products/9277">Button Pad 2x2 - Breakout PCB</a> (COM-09277)</li></ul>
|
|
K PROD_ID:COMP-08481
|
|
$ENDCMP
|
|
#
|
|
$CMP BUTTONPAD-2X2-LEDKIT
|
|
D 2x2 Button Pad w/ Single LEDs Layout and schematic for 2x2 button pad with single-color LEDs under each button. For use with the <a href="https://www.sparkfun.com/products/7836">Button Pad 2x2 - LED Compatible</a> and <a href="https://www.sparkfun.com/products/8746">Button Pad 2x2 Top Bezel</a>. Any <a href="https://www.sparkfun.com/categories/172">single-color 5mm LED</a> should be compatible. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li><li><a href="https://www.sparkfun.com/products/9277">Button Pad 2x2 - Breakout PCB</a> (COM-09277)</li></ul>
|
|
K PROD_ID:COMP-08481
|
|
$ENDCMP
|
|
#
|
|
$CMP BUTTONPAD-2X2-RGB
|
|
D 2x2 Button Pad w/ RGB LEDs Layout and schematic for 2x2 button pad with tri-color LEDs under each button. For use with the <a href="https://www.sparkfun.com/products/7836">Button Pad 2x2 - LED Compatible</a> and <a href="https://www.sparkfun.com/products/8746">Button Pad 2x2 Top Bezel</a>. Any <a href="https://www.sparkfun.com/categories/172">RGB 5mm LED</a> should be compatible. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li><li><a href="https://www.sparkfun.com/products/9277">Button Pad 2x2 - Breakout PCB</a> (COM-09277)</li></ul>
|
|
K PROD_ID:COMP-08481
|
|
$ENDCMP
|
|
#
|
|
$CMP BUTTONPAD-2X2-RGB-STAGGERED
|
|
D 2x2 Button Pad w/ RGB LEDs Layout and schematic for 2x2 button pad with tri-color LEDs under each button. For use with the <a href="https://www.sparkfun.com/products/7836">Button Pad 2x2 - LED Compatible</a> and <a href="https://www.sparkfun.com/products/8746">Button Pad 2x2 Top Bezel</a>. Any <a href="https://www.sparkfun.com/categories/172">RGB 5mm LED</a> should be compatible. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li><li><a href="https://www.sparkfun.com/products/9277">Button Pad 2x2 - Breakout PCB</a> (COM-09277)</li></ul>
|
|
K PROD_ID:COMP-08481
|
|
$ENDCMP
|
|
#
|
|
$CMP BUTTONPAD-4X4-RGB
|
|
D 4x4 Button Pad w/ RGB LEDs Layout and schematic for 4x4 button pad with tri-color LEDs under each button. For use with the 4x <a href="https://www.sparkfun.com/products/7836">Button Pad 2x2 - LED Compatible</a> and 4x <a href="https://www.sparkfun.com/products/8746">Button Pad 2x2 Top Bezel</a>. Any <a href="https://www.sparkfun.com/categories/172">RGB 5mm LED</a> should be compatible. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li><li><a href="https://www.sparkfun.com/products/9277">Button Pad 2x2 - Breakout PCB</a> (COM-09277)</li></ul>
|
|
K PROD_ID:COMP-08481
|
|
$ENDCMP
|
|
#
|
|
$CMP BUTTONPAD-4X4-RGB-STAGGERED
|
|
D 4x4 Button Pad w/ RGB LEDs Layout and schematic for 4x4 button pad with tri-color LEDs under each button. For use with the 4x <a href="https://www.sparkfun.com/products/7836">Button Pad 2x2 - LED Compatible</a> and 4x <a href="https://www.sparkfun.com/products/8746">Button Pad 2x2 Top Bezel</a>. Any <a href="https://www.sparkfun.com/categories/172">RGB 5mm LED</a> should be compatible. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li><li><a href="https://www.sparkfun.com/products/9277">Button Pad 2x2 - Breakout PCB</a> (COM-09277)</li></ul>
|
|
K PROD_ID:COMP-08481
|
|
$ENDCMP
|
|
#
|
|
$CMP DIP-02-PTH-100MIL
|
|
D 2-Position DIP Switch 2-circuit DIP (dual inline package) switch. Commonly used to physcially set a circuit's behavior. <h4>Variants</h4><h5>PTH-100MIL - Through-hole, 0.1"-Pitch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13899">SparkFun Stepoko</a> (ROB-13899)</li></ul><h5>SMD-50MIL-JWING - SMD (J-Wing Pads), 0.05"-Pitch</h5><ul><li><em>Prototype Part</em></li></ul><h5>SMD-50MIL - SMD, 0.05"-Pitch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13777">SparkFun Battery Babysitter</a> (PRT-13777)</li></ul>
|
|
K PROD_ID:SWCH-12532
|
|
$ENDCMP
|
|
#
|
|
$CMP DIP-02-SMD-50MIL
|
|
D 2-Position DIP Switch 2-circuit DIP (dual inline package) switch. Commonly used to physcially set a circuit's behavior. <h4>Variants</h4><h5>PTH-100MIL - Through-hole, 0.1"-Pitch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13899">SparkFun Stepoko</a> (ROB-13899)</li></ul><h5>SMD-50MIL-JWING - SMD (J-Wing Pads), 0.05"-Pitch</h5><ul><li><em>Prototype Part</em></li></ul><h5>SMD-50MIL - SMD, 0.05"-Pitch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13777">SparkFun Battery Babysitter</a> (PRT-13777)</li></ul>
|
|
K PROD_ID:SWCH-13215
|
|
$ENDCMP
|
|
#
|
|
$CMP DIP-02-SMD-50MIL-JWING
|
|
D 2-Position DIP Switch 2-circuit DIP (dual inline package) switch. Commonly used to physcially set a circuit's behavior. <h4>Variants</h4><h5>PTH-100MIL - Through-hole, 0.1"-Pitch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13899">SparkFun Stepoko</a> (ROB-13899)</li></ul><h5>SMD-50MIL-JWING - SMD (J-Wing Pads), 0.05"-Pitch</h5><ul><li><em>Prototype Part</em></li></ul><h5>SMD-50MIL - SMD, 0.05"-Pitch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13777">SparkFun Battery Babysitter</a> (PRT-13777)</li></ul>
|
|
K PROD_ID:SWCH-12372
|
|
$ENDCMP
|
|
#
|
|
$CMP DIP-04SMD
|
|
D 4-Position DIP Switch 4-circuit DIP (dual inline package) switch. Commonly used to physcially set a circuit's behavior. <h4>SparkFun Products</h4><ul><li><em>Prototype Part</em></li></ul>
|
|
K PROD_ID:SWCH-12418
|
|
$ENDCMP
|
|
#
|
|
$CMP ENCODER
|
|
D Rotary Encoder Encoders rotate similarly to potentiometers, but they re different from potentiometers in that an encoder has full rotation without limits. They output gray code so that you can tell how much and in which direction the encoder has been turned. <h4>SparkFun Products</h4><ul><li>Used on the <a href="https://www.sparkfun.com/products/11043">https://www.sparkfun.com/products/11043</a> (COM-11043)</li></ul>
|
|
K PROD_ID:RES-11299
|
|
$ENDCMP
|
|
#
|
|
$CMP ENCODER-2LED
|
|
D Illuminated Rotary Encoder w/ 2 LEDs Rotary encoders rotate similarly to potentiometers, but they re different from potentiometers in that an encoder has full rotation without limits. They output gray code so that you can tell how much and in which direction the encoder has been turned. This encoder has a red/green LED built-in, which shines through the encoder shaft. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10596">Rotary Encoder - Illuminated (Red/Green)</a> (COM-10596)</li><li><a href="https://www.sparkfun.com/products/11722">SparkFun Rotary Encoder Breakout - Illuminated (RG/RGB)</a> (BOB-11722)</li></ul>
|
|
K PROD_ID:COMP-11113
|
|
$ENDCMP
|
|
#
|
|
$CMP ENCODER-2LEDKIT
|
|
D Illuminated Rotary Encoder w/ 2 LEDs Rotary encoders rotate similarly to potentiometers, but they re different from potentiometers in that an encoder has full rotation without limits. They output gray code so that you can tell how much and in which direction the encoder has been turned. This encoder has a red/green LED built-in, which shines through the encoder shaft. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10596">Rotary Encoder - Illuminated (Red/Green)</a> (COM-10596)</li><li><a href="https://www.sparkfun.com/products/11722">SparkFun Rotary Encoder Breakout - Illuminated (RG/RGB)</a> (BOB-11722)</li></ul>
|
|
K PROD_ID:COMP-11113
|
|
$ENDCMP
|
|
#
|
|
$CMP ENCODER-RGB-SWITCH
|
|
D Illuminated Rotary Encoder w/ RGB LED and select switch Encoders rotate similarly to potentiometers, but they re different from potentiometers in that an encoder has full rotation without limits. They output gray code so that you can tell how much and in which direction the encoder has been turned. This encoder includes an RGB LED and a push-down select switch. Part #: Top Up <a href="http://top-up.so-buy.com/front/bin/ptdetail.phtml?Part=EC12PLRGBSDVBF-D">EC12PLRGBSDVBF-D</a> <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10982">Rotary Encoder - Illuminated (RGB)</a> (COM-10982)</li></ul>
|
|
K PROD_ID:RES-10859
|
|
$ENDCMP
|
|
#
|
|
$CMP ENCODER-RGB-SWITCHKIT
|
|
D Illuminated Rotary Encoder w/ RGB LED and select switch Encoders rotate similarly to potentiometers, but they re different from potentiometers in that an encoder has full rotation without limits. They output gray code so that you can tell how much and in which direction the encoder has been turned. This encoder includes an RGB LED and a push-down select switch. Part #: Top Up <a href="http://top-up.so-buy.com/front/bin/ptdetail.phtml?Part=EC12PLRGBSDVBF-D">EC12PLRGBSDVBF-D</a> <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10982">Rotary Encoder - Illuminated (RGB)</a> (COM-10982)</li></ul>
|
|
K PROD_ID:RES-10859
|
|
$ENDCMP
|
|
#
|
|
$CMP ENCODER-SWITCH
|
|
D Rotary Encoder w/ Select Switch Encoders rotate similarly to potentiometers, but they re different from potentiometers in that an encoder has full rotation without limits. They output gray code so that you can tell how much and in which direction the encoder has been turned. This encoder includes a push-down select switch built into the shaft. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/9117">Rotary Encoder</a> (COM-09117)</li></ul>
|
|
K PROD_ID:COM-09117
|
|
$ENDCMP
|
|
#
|
|
$CMP JOYSTICK_MINI
|
|
D Small Tactile Joystick w/ Select Switch A 5-way tactile switch allows for a joystick-like interface in a very small package. Part #: 4UCON SF303GJ26 <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/10063">5-way Tactile Switch</a> (COM-10063)</li><li>Used on <a href="https://www.sparkfun.com/products/13035">SparkFun Block for Intel Edison - OLED</a> (DEV-13035)</li><li>Used on <a href="https://www.sparkfun.com/products/13262">CAN-BUS Shield</a> (DEV-13262)</li></ul>
|
|
K PROD_ID:SWCH-09905
|
|
$ENDCMP
|
|
#
|
|
$CMP JOYSTICK_SLIDE
|
|
D Resistive Thumb Slide Joystick This is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting slide feeling. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/9426">Thumb Slide Joystick</a> (COM-09426)</li></ul>
|
|
K PROD_ID:COM-09426
|
|
$ENDCMP
|
|
#
|
|
$CMP JOYSTICK_THUMB
|
|
D Analog Thumb Joystick This is a joystick very similar to the analog joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/9032">Thumb Joystick</a> (COM-09032)</li><li><a href="https://www.sparkfun.com/products/9110">SparkFun Thumb Joystick Breakout</a> (BOB-09110)</li><li><a href="https://www.sparkfun.com/products/9760">SparkFun Joystick Shield Kit</a> (DEV-09760)</li></ul>
|
|
K PROD_ID:COMP-09744
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-2-SMD-4.6X2.8MM
|
|
D Momentary Switch (Pushbutton) - SPST - Two Circuits Normally-open (NO) SPST momentary switches (buttons, pushbuttons). Schematic symbol includes two switch circuits. <h4>Variants</h4><ul><li><b>SMD-4.6MMX2.8MM</b> - 4.60mm x 2.80mm Tactile Momentary Button Switch - Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li><li><b>SMD-5.2MM</b> - <a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> - Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li></ul>
|
|
K PROD_ID:SWCH-13065
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-2-SMD-5.2MM
|
|
D Momentary Switch (Pushbutton) - SPST - Two Circuits Normally-open (NO) SPST momentary switches (buttons, pushbuttons). Schematic symbol includes two switch circuits. <h4>Variants</h4><ul><li><b>SMD-4.6MMX2.8MM</b> - 4.60mm x 2.80mm Tactile Momentary Button Switch - Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li><li><b>SMD-5.2MM</b> - <a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> - Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li></ul>
|
|
K PROD_ID:SWCH-08247
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-LED-PTH-12MM
|
|
D Momentary Switch (Pushbutton) - SPST - w/ LED Normally-open (NO) SPST momentary switches (buttons, pushbuttons), with a built-in LED. <h4>Variants</h4><h5>PTH-CHERRY - Cherry MX Switch</h5>Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They re satisfyingly clicky , reliable up to tens-of-millions of key presses, and a standard in gaming and programming keyboards across the globe. This blue version Cherry MX Switch is favored by most due to its secondary internal actuator making it less likely to double-tap. If you are looking for a noticeably audible and high-quality key switch, this is the perfect option for you! <ul><li><a href="https://www.sparkfun.com/products/13834">Cherry MX Switch</a> (COM-13834)</li><li><a href="https://www.sparkfun.com/products/13773">Cherry MX Switch Breakout</a> (BOB-13773)</li></ul><h5>PTH-12MM and PTH-12MM-KIT - 12mm Illuminated LED</h5>KIT variant is for soldering kits. There is no tStop (covering up the top side of the pads with mask). This helps the beginner see which side they should be soldering too. <ul><li><a href="https://www.sparkfun.com/products/10467">LED Tactile Button Breakout</a> (BOB-10467)</li><li><a href="https://www.sparkfun.com/products/10442">LED Tactile Button - Red</a> (COM-10442)</li><li><a href="https://www.sparkfun.com/products/10443">LED Tactile Button - Blue</a> (COM-10443)</li><li><a href="https://www.sparkfun.com/products/10440">LED Tactile Button - Green</a> (COM-10440)</li><li><a href="https://www.sparkfun.com/products/10441">LED Tactile Button - Orange</a> (COM-10441)</li><li><a href="https://www.sparkfun.com/products/10439">LED Tactile Button - White</a> (COM-10439)</li></ul>
|
|
K PROD_ID:SWCH-11758
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-LED-PTH-12MM-KIT
|
|
D Momentary Switch (Pushbutton) - SPST - w/ LED Normally-open (NO) SPST momentary switches (buttons, pushbuttons), with a built-in LED. <h4>Variants</h4><h5>PTH-CHERRY - Cherry MX Switch</h5>Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They re satisfyingly clicky , reliable up to tens-of-millions of key presses, and a standard in gaming and programming keyboards across the globe. This blue version Cherry MX Switch is favored by most due to its secondary internal actuator making it less likely to double-tap. If you are looking for a noticeably audible and high-quality key switch, this is the perfect option for you! <ul><li><a href="https://www.sparkfun.com/products/13834">Cherry MX Switch</a> (COM-13834)</li><li><a href="https://www.sparkfun.com/products/13773">Cherry MX Switch Breakout</a> (BOB-13773)</li></ul><h5>PTH-12MM and PTH-12MM-KIT - 12mm Illuminated LED</h5>KIT variant is for soldering kits. There is no tStop (covering up the top side of the pads with mask). This helps the beginner see which side they should be soldering too. <ul><li><a href="https://www.sparkfun.com/products/10467">LED Tactile Button Breakout</a> (BOB-10467)</li><li><a href="https://www.sparkfun.com/products/10442">LED Tactile Button - Red</a> (COM-10442)</li><li><a href="https://www.sparkfun.com/products/10443">LED Tactile Button - Blue</a> (COM-10443)</li><li><a href="https://www.sparkfun.com/products/10440">LED Tactile Button - Green</a> (COM-10440)</li><li><a href="https://www.sparkfun.com/products/10441">LED Tactile Button - Orange</a> (COM-10441)</li><li><a href="https://www.sparkfun.com/products/10439">LED Tactile Button - White</a> (COM-10439)</li></ul>
|
|
K PROD_ID:SWCH-11758
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-LED-PTH-CHERRY
|
|
D Momentary Switch (Pushbutton) - SPST - w/ LED Normally-open (NO) SPST momentary switches (buttons, pushbuttons), with a built-in LED. <h4>Variants</h4><h5>PTH-CHERRY - Cherry MX Switch</h5>Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They re satisfyingly clicky , reliable up to tens-of-millions of key presses, and a standard in gaming and programming keyboards across the globe. This blue version Cherry MX Switch is favored by most due to its secondary internal actuator making it less likely to double-tap. If you are looking for a noticeably audible and high-quality key switch, this is the perfect option for you! <ul><li><a href="https://www.sparkfun.com/products/13834">Cherry MX Switch</a> (COM-13834)</li><li><a href="https://www.sparkfun.com/products/13773">Cherry MX Switch Breakout</a> (BOB-13773)</li></ul><h5>PTH-12MM and PTH-12MM-KIT - 12mm Illuminated LED</h5>KIT variant is for soldering kits. There is no tStop (covering up the top side of the pads with mask). This helps the beginner see which side they should be soldering too. <ul><li><a href="https://www.sparkfun.com/products/10467">LED Tactile Button Breakout</a> (BOB-10467)</li><li><a href="https://www.sparkfun.com/products/10442">LED Tactile Button - Red</a> (COM-10442)</li><li><a href="https://www.sparkfun.com/products/10443">LED Tactile Button - Blue</a> (COM-10443)</li><li><a href="https://www.sparkfun.com/products/10440">LED Tactile Button - Green</a> (COM-10440)</li><li><a href="https://www.sparkfun.com/products/10441">LED Tactile Button - Orange</a> (COM-10441)</li><li><a href="https://www.sparkfun.com/products/10439">LED Tactile Button - White</a> (COM-10439)</li></ul>
|
|
K PROD_ID:COM-13834
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-PTH-12MM
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-09185
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-PTH-6.0MM
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID: SWCH-08441
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-PTH-6.0MM-KIT
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-08441
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-PTH-RIGHT-ANGLE-KIT
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:CONN-10672
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-SMD-12MM
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-11967
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-SMD-4.5MM
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-09213
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-SMD-4.6X2.8MM
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-13065
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-SMD-5.2-REDUNDANT
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-08247
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-SMD-5.2MM
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-08247
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-SMD-6.0X3.5MM
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-00815
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-SMD-6.2MM-TALL
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:SWCH-11966
|
|
$ENDCMP
|
|
#
|
|
$CMP MOMENTARY-SWITCH-SPST-SMD-RIGHT-ANGLE
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:COMP-12265
|
|
$ENDCMP
|
|
#
|
|
$CMP NAV_SWITCH
|
|
D Navigation Switch Three way navigation switch. Commonly used as up/down/select on MP3 players. Schematic element and footprint production proven. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/8184">Surface Mount Navigation Switch</a> (COM-08184)</li><li>Used on <a href="https://www.sparkfun.com/products/13720">SparkFun MP3 Trigger</a></li></ul>
|
|
K PROD_ID:SWCH-08301
|
|
$ENDCMP
|
|
#
|
|
$CMP REED_SWITCH-PTH-GLASS
|
|
D Reed Switch A reed switch is a magnetically-actuated switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. <h4>Variant Overview</h4><h5>PTH-GLASS</h5><ul><li><a href="https://www.sparkfun.com/products/8642">Reed Switch</a> (COM-08642) - PTH reed switch w/ glass body (6.0 x 0.9 mm)</li></ul><h5>PTH-INSULATED</h5><ul><li><a href="https://www.sparkfun.com/products/10601">Reed Switch - Insulated</a> (COM-10601) - PTH reed switch w/ insulated body (15.1 x 4.2 mm)</li></ul>
|
|
K PROD_ID:SWCH-09282
|
|
$ENDCMP
|
|
#
|
|
$CMP REED_SWITCH-PTH-INSULATED
|
|
D Reed Switch A reed switch is a magnetically-actuated switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. <h4>Variant Overview</h4><h5>PTH-GLASS</h5><ul><li><a href="https://www.sparkfun.com/products/8642">Reed Switch</a> (COM-08642) - PTH reed switch w/ glass body (6.0 x 0.9 mm)</li></ul><h5>PTH-INSULATED</h5><ul><li><a href="https://www.sparkfun.com/products/10601">Reed Switch - Insulated</a> (COM-10601) - PTH reed switch w/ insulated body (15.1 x 4.2 mm)</li></ul>
|
|
K PROD_ID:SWCH-10467
|
|
$ENDCMP
|
|
#
|
|
$CMP ROCKER_SWITCH-SPST_PTH_RIGHT_ANGLE
|
|
D Momentary Switch (Pushbutton) - SPST Normally-open (NO) SPST momentary switches (buttons, pushbuttons). <h4>Variants</h4><h5>PTH-12MM - 12mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul><h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li><li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul><h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5><ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a></li></ul><h5>SMD-12MM - 12mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li><li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul><h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul><h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul><h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5><ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li><li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li><li>REDUNDANT package connects both switch circuits together</li></ul><h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul><h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5><ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li><li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul><h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel Edison - Arduino</a></li></ul>
|
|
K PROD_ID:COMP-12265
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-3PDT-PTH-STOMP
|
|
D 3-Pole, Double-Throw (3PDT) Switch Three-pole, double-throw stomp switch. Drawn as three separate gates for schematic clarity. <h4>SparkFun Products</h4><ul><li>Used in <a href="https://www.sparkfun.com/products/13124">SparkFun Proto Pedal</a> (PRT-13124)</li></ul>
|
|
K PROD_ID:SWCH-13197
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-DPDT-PTH-GPI-152-3013
|
|
D Double-Pole, Double-Throw (DPDT) Switch Double-pole, double-throw switches. <h4>Variant Overview</h4><h5>PTH-GPI-152-3013</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/11345">SparkFun Geiger Counter</a></li></ul><h5>SMD-AY0202</h5><ul><li><a href="https://www.sparkfun.com/products/597">Surface Mount DPDT Switch</a> (COM-00597)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a></ul>
|
|
K PROD_ID:SWCH-10554
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-DPDT-SMD-AYZ0202
|
|
D Double-Pole, Double-Throw (DPDT) Switch Double-pole, double-throw switches. <h4>Variant Overview</h4><h5>PTH-GPI-152-3013</h5><ul><li>Used on <a href="https://www.sparkfun.com/products/11345">SparkFun Geiger Counter</a></li></ul><h5>SMD-AY0202</h5><ul><li><a href="https://www.sparkfun.com/products/597">Surface Mount DPDT Switch</a> (COM-00597)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a></ul>
|
|
K PROD_ID:SWCH-08179
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-SP3T-SMD
|
|
D Single-Pole, Triple-Throw (SP3T) Switch Single-Pole, Triple-Throw switches <h4>SparkFun Products</h4><ul><li><em>Prototype Part</em></li></ul>
|
|
K PROD_ID:SWCH-10805
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-SPDT-PTH-11.6X4.0MM
|
|
D Single Pole, Double Throw (SPDT) Switch Single-pole, double-throw (SPDT) switch. <h4>Variant Overview</h4><h5>SMD-AYZ0202</h5><ul><li><a href="https://www.sparkfun.com/products/597">Surface Mount DPDT Switch</a> (COM-00597)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a></ul><h5>PTH-11.6X4.0MM</h5><ul><li><a href="https://www.sparkfun.com/products/102">SPDT Mini Power Switch</a> (COM-00102)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li></ul><h5>PTH-11.6X4.0MM-KIT</h5><ul><li>KIT version of SPDT Mini Power Switch - Simplifies soldering by removing tStop of switch pins - only one side can be soldered.</li></ul><h5>PTH-11.6X4.0MM-LOCK</h5><ul><li>LOCK version of SPDT Mini Power Switch - Offset pins hold switch in place for easier soldering.</li></ul><h5>SMD-RIGHT-ANGLE</h5><ul><li><a href="https://www.sparkfun.com/products/10860">Surface Mount Right Angle Switch</a> (COM-10860)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/13231">SparkFun ESP8266 Thing</a></li></ul>
|
|
K PROD_ID:SWCH-08261
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-SPDT-PTH-11.6X4.0MM-KIT
|
|
D Single Pole, Double Throw (SPDT) Switch Single-pole, double-throw (SPDT) switch. <h4>Variant Overview</h4><h5>SMD-AYZ0202</h5><ul><li><a href="https://www.sparkfun.com/products/597">Surface Mount DPDT Switch</a> (COM-00597)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a></ul><h5>PTH-11.6X4.0MM</h5><ul><li><a href="https://www.sparkfun.com/products/102">SPDT Mini Power Switch</a> (COM-00102)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li></ul><h5>PTH-11.6X4.0MM-KIT</h5><ul><li>KIT version of SPDT Mini Power Switch - Simplifies soldering by removing tStop of switch pins - only one side can be soldered.</li></ul><h5>PTH-11.6X4.0MM-LOCK</h5><ul><li>LOCK version of SPDT Mini Power Switch - Offset pins hold switch in place for easier soldering.</li></ul><h5>SMD-RIGHT-ANGLE</h5><ul><li><a href="https://www.sparkfun.com/products/10860">Surface Mount Right Angle Switch</a> (COM-10860)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/13231">SparkFun ESP8266 Thing</a></li></ul>
|
|
K PROD_ID:SWCH-08261
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-SPDT-PTH-11.6X4.0MM-LOCK
|
|
D Single Pole, Double Throw (SPDT) Switch Single-pole, double-throw (SPDT) switch. <h4>Variant Overview</h4><h5>SMD-AYZ0202</h5><ul><li><a href="https://www.sparkfun.com/products/597">Surface Mount DPDT Switch</a> (COM-00597)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a></ul><h5>PTH-11.6X4.0MM</h5><ul><li><a href="https://www.sparkfun.com/products/102">SPDT Mini Power Switch</a> (COM-00102)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li></ul><h5>PTH-11.6X4.0MM-KIT</h5><ul><li>KIT version of SPDT Mini Power Switch - Simplifies soldering by removing tStop of switch pins - only one side can be soldered.</li></ul><h5>PTH-11.6X4.0MM-LOCK</h5><ul><li>LOCK version of SPDT Mini Power Switch - Offset pins hold switch in place for easier soldering.</li></ul><h5>SMD-RIGHT-ANGLE</h5><ul><li><a href="https://www.sparkfun.com/products/10860">Surface Mount Right Angle Switch</a> (COM-10860)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/13231">SparkFun ESP8266 Thing</a></li></ul>
|
|
K PROD_ID:SWCH-08261
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-SPDT-SMD-AYZ0202
|
|
D Single Pole, Double Throw (SPDT) Switch Single-pole, double-throw (SPDT) switch. <h4>Variant Overview</h4><h5>SMD-AYZ0202</h5><ul><li><a href="https://www.sparkfun.com/products/597">Surface Mount DPDT Switch</a> (COM-00597)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a></ul><h5>PTH-11.6X4.0MM</h5><ul><li><a href="https://www.sparkfun.com/products/102">SPDT Mini Power Switch</a> (COM-00102)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li></ul><h5>PTH-11.6X4.0MM-KIT</h5><ul><li>KIT version of SPDT Mini Power Switch - Simplifies soldering by removing tStop of switch pins - only one side can be soldered.</li></ul><h5>PTH-11.6X4.0MM-LOCK</h5><ul><li>LOCK version of SPDT Mini Power Switch - Offset pins hold switch in place for easier soldering.</li></ul><h5>SMD-RIGHT-ANGLE</h5><ul><li><a href="https://www.sparkfun.com/products/10860">Surface Mount Right Angle Switch</a> (COM-10860)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/13231">SparkFun ESP8266 Thing</a></li></ul>
|
|
K PROD_ID:SWCH-08179
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH-SPDT-SMD-RIGHT-ANGLE
|
|
D Single Pole, Double Throw (SPDT) Switch Single-pole, double-throw (SPDT) switch. <h4>Variant Overview</h4><h5>SMD-AYZ0202</h5><ul><li><a href="https://www.sparkfun.com/products/597">Surface Mount DPDT Switch</a> (COM-00597)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/12049">LilyPad Arduino USB - ATmega32U4 Board</a></ul><h5>PTH-11.6X4.0MM</h5><ul><li><a href="https://www.sparkfun.com/products/102">SPDT Mini Power Switch</a> (COM-00102)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li></ul><h5>PTH-11.6X4.0MM-KIT</h5><ul><li>KIT version of SPDT Mini Power Switch - Simplifies soldering by removing tStop of switch pins - only one side can be soldered.</li></ul><h5>PTH-11.6X4.0MM-LOCK</h5><ul><li>LOCK version of SPDT Mini Power Switch - Offset pins hold switch in place for easier soldering.</li></ul><h5>SMD-RIGHT-ANGLE</h5><ul><li><a href="https://www.sparkfun.com/products/10860">Surface Mount Right Angle Switch</a> (COM-10860)</li><li>Used on e.g. <a href="https://www.sparkfun.com/products/13231">SparkFun ESP8266 Thing</a></li></ul>
|
|
K PROD_ID:SWCH-10651
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH_ROTARY_1X10-PTH
|
|
D 10-Position Rotary Switch Single pole, 10 position rotary switch able to select up to 10 different states. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/13253">Rotary Switch - 10 Position</a> (COM-13253)</li><li>Used on <a href="https://www.sparkfun.com/products/13006">SparkFun Decade Resistance Box</a></li>
|
|
K PROD_ID:SWCH-12120
|
|
$ENDCMP
|
|
#
|
|
$CMP SWITCH_ROTARY_1X10-PTH-KIT
|
|
D 10-Position Rotary Switch Single pole, 10 position rotary switch able to select up to 10 different states. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/13253">Rotary Switch - 10 Position</a> (COM-13253)</li><li>Used on <a href="https://www.sparkfun.com/products/13006">SparkFun Decade Resistance Box</a></li>
|
|
K PROD_ID:SWCH-12120
|
|
$ENDCMP
|
|
#
|
|
$CMP TRACKBALLMECH
|
|
D Trackball - Mechanical This is a tiny trackball akin to those found on a number of Blackberry models (8100, 8300, 8320, 8800, 8830, etc). Each of the four spindles have a tiny circular magnet on each end. Great when paired with very small SMD Hall effect sensors. <h4>SparkFun Products</h4><ul><li><a href="https://www.sparkfun.com/products/9308">Blackberry Trackball</a> (COM-09308)</li><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li>
|
|
K PROD_ID:COMP-09237
|
|
$ENDCMP
|
|
#
|
|
#End Doc Library
|