EESchema-DOCLIB Version 2.0 # $CMP 7-SEGMENT-1DIGIT-1INCH-BLUE D 7-Segment Display, single digit, 1" EZ is for kits. Pads are only exposed on the bottom side to help prevent soldering in upside down. Datasheet (Red)
Datasheet (Blue)

SparkFun Products

K PROD_ID:COMP-09495 $ENDCMP # $CMP 7-SEGMENT-1DIGIT-1INCH-RED D 7-Segment Display, single digit, 1" EZ is for kits. Pads are only exposed on the bottom side to help prevent soldering in upside down. Datasheet (Red)
Datasheet (Blue)

SparkFun Products

K PROD_ID:COMP-08615 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-10MM-BLUE D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-09664 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-10MM-KGREEN D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-09665 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-10MM-RED D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-09493 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-10MM-WHITE D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-11430 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-10MM-YELLOW D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-09654 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-10MMLONGPADS-RED D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-09493 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-20MM-BLUE D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-11446 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-20MM-GREEN D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-11447 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-20MM-HP-BUBBLE D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COM-12710 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-20MM-RED D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-11449 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-20MM-WHITE D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-11445 $ENDCMP # $CMP 7-SEGMENT-4DIGIT-20MM-YELLOW D 4 Digit 7 Segment Display This is a part for the 4-Digit 7-segment LEDs from Young Sun. Different from the Digikey LEDs, all 16 pins are used.
The LONGPADS Variant is used for a test jig, but you may like it because there is more pad to solder to. If you are concerned about routing space, the standard works just fine though.

Datasheets:

SparkFun Products

K PROD_ID:COMP-11448 $ENDCMP # $CMP LED-3MM-NO_SILK D LED (Generic)Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. Generic LEDs with no color specified. K PROD_ID:XXX-00000 $ENDCMP # $CMP LED-BLUE0603 D Blue SMD LED Used in manufacturing of various products at SparkFun Packages: